Professional Documents
Culture Documents
General Catalog: All Products Guide
General Catalog: All Products Guide
Factory :
Osaka Office
2-12-12 Minami-semba, Chuo-ku Osaka 542-0081, Japan
Phone +81-6-6251-2027 Fax +81-6-6258-3230
Note) To consistently improve our products, the specifications in this catalog are subjectto change without notice.
Printed in Japan
Distributed by
GENERAL
CATALOG
POWER TRANSMISSION & CONVEYOR CHAIN
2007
DRIVEN TO SOLUTIONS
The D.I.D Brand
Known for its Durability and Dependability in Design.
An established technical innovator in the world chain drive market,
serving a broad spectrum of industries with quality products
for over 70 years. That is D.I.D
Our technology turns timely ideas into productive realities.
D.I.D a professional partnership you can count on
for your optimum drive system solutions.
ISO9001/2000 Certification
It is indispensable to obtain the certification
of ISO9001/2000 for supplying products to
overseas markets - not only Europe and the
US but also other countries. Our entire
production system, including design,
development, manufacturing, installation
and technical assistance for all of our
products including various chains, conveyor
systems and welfare equipment, has been
certified by the Japan Quality Assurance
Organization (JQA).
Authorization by API
The American oil industry applies rigid
quality control standards to all mechanical
parts used in oil field development and oil
refining. The organization that examines
the conformity with their standards for
authorization is called API (American
Petroleum Institute).
Since receiving authorization from API in
1972, we have been supplying DID roller
chains and sprockets to many companies
not only in the USA but also all over the
world under our rigid quality control system.
ISO14001 Certification
ISO14001 was established in 1996 by the
International Organization for Standardization, to set
requirements for environmental management
systems. In order to preserve the global environment,
reverse contamination and enhance the health of
human beings and ecosystems, DAIDO declared our
policies for environmental preservation. As a result,
our management system for our activities, products
and service for environmental protection was
certified by the organization. We have been engaged
in various activities for environmental preservation
and improvement, such as reduction of waste and
classification of waste for recycling, in accordance
with our environmental policies.
CAUTION
Before use, be sure to read
the catalog and instruction manual carefully.
If you find something unclear,
please consult with us.
Cautions
Cautions for handling of chains and sprockets
Before handling chains and sprockets, please understand the respective structures and specifications
correctly, and read the following cautions for using them safely.
2 Chain Installation
Connection
Driving Direction
Head of clip
Driving Direction
60
Warning
Do not partially replace a part of a chain.
Do not partially exchange a worn or damaged
chain and sprockets. Replacing only the worn or
damaged part does not restore overall strength
and risks further breaking or destruction. Always
replace the entire chain and sprockets.
Do not modify chains or sprockets.
Most of the components of a chain are heattreated. If they are reprocessed, strength is
diminished and breaking or destruction can
result.
Electroplating may cause hydrogen embrittlement.
Welding may lower the strength of chains
and components due to a flaw or heat, and
result in destruction.
Annealing can lower the performance of products
and components and may result in destruction.
Handling
30
S-pin
45
Warning
Do not attempt to modify any components.
When assembling, never drill a hole on a
connecting plate to make it larger and never
file a pin to make it thinner for smooth
insertion of the pin into the connecting plate.
Do not use used chains.
Do not reuse clips and do not install a used
cotter pin, connecting link or any other
component for a new chain.
(3) For proper operation of a chain, install and
adjust it correctly. (See P127 ~ 134 and P340
~ 342.)
(4) After installing a chain and sprockets, confirm
Confirmation
the following before switching on the power:
Is the connecting link correctly and
securely connected?
Is the chain engaged with the teeth of the
sprockets?
Is the amount of lubrication proper?
Is anything likely to cause interference or
be scattered?
Is the safety cover correctly installed?
Is there anything interfering with the
safety cover?
Whether or not there is anything
interfering with the chain.
If there is anything abnormal about the
connecting link portion, etc. and whether
the respective components of the chain
are flawed, rusty or abnormal in any other
way.
Do not stay in the rotation direction of the
chain.
(5) If any abnormal noise is generated after
switching on the power, switch off the power
and re-confirm.
Adjustment
Avoidance of Danger
Install a safety cover.
For the apparatus with a chain and
sprockets installed, be sure to install a
safety cover. Any unexpected fracture may
cause the chain to be thrown from the
sprockets. In addition to a sufficient
protector, install a stopping device such as
an overload limit switch or brake so as not to
cause overload.
Check for chain interference.
Any obstacle which interferes with a driven
chain and sprockets is dangerous and
shortens the life of the chain and sprockets.
Always check for any interfering objects, and
remove them.
4 Others
Even chains of the same kind and size have a
different service life depending on the service
environment, numbers of teeth of the sprockets,
lubrication and other conditions. This also applies
to the life of sprockets. Chains and sprockets are
different in wear life. If a new chain is used on an
old sprocket with worn teeth, failure or rupture of
the chain may occur.
When a chain or sprocket must be replaced,
replace both the chain and sprockets.
3 Maintenance
To prevent any serious accident caused by a chain
and sprockets, and to prolong the life of the chain
and sprockets, take the following maintenance
actions:
Cautions
Cautions for using roller chains for lifting
Based on the "Chain Safety (Technical) Standards" and "End Fittings" proposed by Japan Chain Association to
the Japan Parking System Manufacturers Association Incorporated and multilevel parking machine
manufacturers in February and October, 1993, the cautions necessary for using roller chains (hereinafter called
chains) for lifting are stated below.
1 Safety factor
2 Selection of chain
2-1 Max. tension
The Max. tension allowed to apply to a chain is set
at not higher than the value obtained by dividing
the minimum tensile strength of the chain by a
safety factor. However, be sure to examine the
selecting methods recommended by us (See P120
and 121), and adopt a safer method.
The Max. tension corresponds to the "corrected
chain tension" which includes dynamic load at
starting and stopping in addition to offset load by a
motor vehicle (difference in weight between front
and rear wheels, horizontal shift of the motor
vehicle in reference to a pallet, offset load due to
the chain lifting position, etc.)
DID
35-2
DID
40-1
DID
40-2
DID
50-1
DID
50-2
DID
60-1
DID
60-2
DID
80-1
DID
80-2
0
02.80.1
07.2 07.4
03.2
04.3
0.1
0
05.2
0.1
0
10.9 11.1
06.8
22.3 22.6
27.1 27.4
0
40.4 0.3
0
51.8 0.3
0
63.1 0.3
0
35.5 0.3
0
10.10.1
35.1 35.4
0
80.7 0.3
0
37.2 0.3
12.0
0.1
0
36.7 37.0
0
85.8 0.3
0
45.2 0.3
DID 160-1
DID 160-2
31.9
0
27.5 0.3
0
08.50.1
13.6
0.1
0
44.7 45.0
05.02 0.02
0
103.4 0.3
10.1 0.1
05.58 0.02
0
04.00 +0.05
(Reference)
(Reference)
(Reference)
4.5
07.16 0.02
0
05.12 +0.05
6.3
7.5
18.1 0.1
0
05.990.05
08.40 0.02
0
07.970.1
11.27 0.02
0
09.570.1
13.47 0.02
0
11.150.1
15.64 0.02
0
12.750.1
17.94 0.02
0
14.330.1
19.94 0.02
4.7
6.0
14.4 0.1
0
0.3
0
22.6 0.2
0.1
0
DID 140-1
DID 140-2
25.4
0
17.8 0.2
17.4 17.7
0
03.62 +0.05
0
0.3
0
13.8 0.2
13.6 13.8
D'
0
17.5 0.3
0
11.2 0.2
0.1
0
DID 120-1
DID 120-2
DID 100-1
DID 100-2
(Reference)
35-1
DID
Unit (mm)
22.8 0.1
12.0
15.0
7.9
9.2
9.5
12.2
29.3 0.1
12.7
15.2
35.8 0.1
15.8
18.2
45.4 0.1
19.0
21.2
48.9 0.1
22.2
24.2
58.5 0.1
09.0
25.4
18.1
24.2
30.2
36.2
42.3
48.3
Note:
1) The dimensions of D'can be applied only when DID bushings are used. If these dimensions are applied to the bushings for chains produced
by other manufacturers, the strength may be lower.
2) Dimensions "g" and "S" of duplex chain chain with bushings include the dimensions of the bushings.
INDEX
Rustless Chain 186
High Guard Chain 188
Double Guard Chain 190
Stainless Steel Chain 192
Stainless Steel X-Ring Chain 194
Technical Information
3 Conveyor Chains
Classification 218
Construction and Components of DK Conveyor Chains 219
How to Order DK Conveyor Chains 220
Related Products
Roller Chain Coupling 110
DID C-Top (Chain Cover) 114
Sprocket 115
Maintenance
Installation 127
Maintenance 130
Lubrication 132
Troubleshooting Guide 134
Timing for Replacement 137
Seal Chain
Dirty
Environment
Dusty
Dirty or
contaminated
lubricants or
deterioration of
lubrication.
Sandy or dusty
environment.
Corrosive
Atmosphere
Corrosive
atmosphere
(by CAS test).
Moisture,
Salt Water
Maintenance-Free
Great Savings
Tensile
strength index
100
Allowable
Load
100
5 Photo / Sprocket
Photos of Conveyor Systems and Chains in Use 308
Photos of Specialty Chains 313
DK Conveyor Chain Sprocket 314
6 Technical Information
Chain Selection 330
Allowable Loads of Rollers and Attachments 337
Property of Loads and Recommended Chains 338
Corrosion Resistance Against Various Substances 339
Rust Prevention of DK Conveyor Chain 340
Index of tensile
strength
Acidic
Environment
Clean Areas
10
100
Great cost
savings can be
achieved through
longer life and
less down time.
Alkaline
Environment
Atmosphere
where alkaline
liquid is present.
Atmosphere
where acid liquid
is present.
Atmosphere
where cleanliness
is required.
base line).
Temperature
Range in Use
Others
Where lubrication
is infrequent or
prohibited.
Atmosphere
where exposure
to rain, moisture,
and sea water is
present.
Temperature
range in use.
OK
Coating tolerable
temperature
Allowable tension
index
(Standard roller chains)
VENDING
MACHINE
As conveyor chain
in vending machine.
PACK
As conveyor and
drive chain in
packing machine.
CONVEYOR
CHEMICALS
PARKING
As drive chain in
vertical automated
parking.
OUTDOOR
As conveyor and
drive chain in
outdoor equipment.
BOOK
BINDING
As conveyor and
drive chain in book
binding machine.
TEXTILE
As conveyor and
drive chain in textile
machine.
FOOD
As conveyor and
drive chain in food
processing machine.
As conveyor and
drive chain in
printing machine.
WATER
TREATMENT
As conveyor and
drive chain in water
treatment.
CONSTRUCTION
As drive chain in
construction
machine.
Glossary 345
Description
Page
285
DID 1/2
Bicycle Chain
101
DID
103
DID
102
DID
DID
DID
BF,DID
DID
DHA
BFH
106
107
BF Bushing Chain
298
DH- Chain
70150180
DID
Hi-Guard Chain
84158188
DID
210
DID
FX
Flexible Chain
209
DID
HK
HK Roller Chain
6061
DID
HP
208
DID
LD,DID
O-Ring/X-Ring Chain
72152182
DID
82156186
DID
-SR-
204
DID
-SRB-
207
DID
SS
88162192
DID
SSK
88162192
DID
SSLT
90164194
DID
T,DID
68148178
DID
TK
92166
DID
-TR-
198
DID
-TRB-
206
DID
UN
96
DID
UR
74154184
DID
URN
74154184
DID
WG
86160190
DID
-A,B,BW,C
172
DID
-A,B,BW,C
1947115
DID AL
AL Leaf Chain
108
DID BL
BL Leaf Chain
108
DID C
168
DID C-
110
DID CT-
114
LX
DID HI-PWR-S
DID HI-PWR-S
HK
50
62
DID PS-
DHA
PS Silent Chain
105
DID SC-
SDH
SC Silent Chain
104
DID SCA-
SDH
104
DID SCR-
SDH
104
DK
287
DK
288
DK
285
DK
281
DK
283
DK
328
DK
Rake Chain
294
10
Product No.
DK
DK
BR,DK
DK
UF
DK
UR,DK
BF
UF
Description
Page
290
261270
286
243260
DK
274
DK
275276
DK
-A,B,BW,C
314
DK
Block Chain
291
DK
-SR
278
DK
-TR
279
DK
Seal Chain
272
DK
-A-
223226242
DK
-C-
223
DK
-D-
223
DK
-D1-
223
DK
-D2-
223
DK
-D3-
223
DK
-D4-
223
DK
-D5-
223
DK
-D6-
223
DK
-E-
223
DK
-K-
223226242
DK
-P-
223
DK
-S3-
223
DK
-S4-
223
DK
-S5-
223
DK
-SH-
223
DK 100-152
292
DK CBR
305
DK FH-
301
DK L..S.T 6
302
DK WAS
297
DK WS
WS Roller Chain
295
DK X
299
DK Z-
300
DK-BU X
303
DK-HL
277
306
114
IW
,IWH
,IWD
Chain Lube
114
HI-PWR Lube
114
11
memo
12
13
General
Allowable ambient temperature
Low temperature
High temperature
Low Noise
P18~47
Hygiene circumstances
JIS ISO
Page
Dusty circumstances
Product No.
Wear resistance
Classification by use
High tension
General
Functions
HK
High-strength Roller Chain Series
HI-PWR-S
P48~63
-10~80 C
HI-PWR-S HK
T, D
P68~71
DHA
-10~60 C
UR
Ultimate Life Chain Series
-10~200 C
UR-F
P72~79
LX, LD
-10~120 C
LDSSP
120~200 C
N
E
P82~87
-10~80 C
WG
Environment Resistance Chain Series
SS
-10~400 C
SSK
P88~91
-10~200 C
SSLT
TK
P92,93
-40~80 C
UN
P94~97
-10~80 C
Bicycle Chain
Small pitch Chain
P101~103,106
Engine Eechanism chain
Agricultural Roller Chain
Specialty
Chain Series
SCA, SCR, SC
P104,105
Silent Chain
PS
BS roller Chain
P107
ISO-B
AL
P108,109
Leaf Chain
BL
14
15
General
MACHINING
CHEMICALS/medical
WATER TREATMENT
PARKING
CHEMICALS
VENDING MACHINE
FOOD
CONVEYOR
MINING
EXCAVATION
MACHINE
FORESTRY
PETROLIUM
OUTDOOR
AGRICULTURE
CONSTRUCTION
HOME APPLIANCE
TEXTILE
PACK
Main uses
General
General
The HK series are improved in the strength of plates to allow heavy duty transmission mainly in a low speed range, and
include two lines; HK roller chains and HI-PWR-SHK roller chains further enhanced in fatigue strength.
Sprockets
The simplex chains can be engaged with standard sprockets of the corresponding nominal numbers. For sprockets, see P115 ~.
Selection of chains
For selecting a standard roller chain or HI-PWR-S roller chain, refer to "Selection of Chains" (P120). However, only for a
special case of low speed and less shock, "Low-speed selection method" (P121) can also be referred to.
For selecting an HK roller chain or HI-PWR-SHK roller chain, refer to "Slow-speed selection" (P121).
For selecting a connecting link or offset link, refer to "General selection". Since selection according to "Slow-speed
selection" results in insufficient strength, please consult us.
Number of chain strands and method for connecting outer plates with pins
For the numbers of available strands, refer to the table of "Dimensions" for each size of chain.
The standard method for connecting pins and plates is rivet type (RP).
The cotter type (CP) can be used for standard chains and HK chains of DID80 or larger.
* As for HI-PWR-S chains and HI-PWR-SHK chains, only rivet type (RP) is available.
[Type indication]
DID 60 LX 160 R E
DAIDO's product
Indicates that
the overall
length of chain
is 160 links.
Size of chain
Type of chain
(LX indicates an O-ring chain)
Clip type
Chain No.
Cotter
pin type
Clearance fit: R
Interference fit: F
Clearance fit: C
Interference fit: H
When you place an order for DID80CP with 121 links, three
offset links and one C connecting link as a straight chain.
DID 80 C J
Chain No.
Type of connecting link
Indicates
a connecting link.
DID 60 OJ
Chain No.
DID80HK H J
Chain No.
Type of connecting link
Indicates a
connecting link.
*When you place an order, refer to "Set Number of Chains and Links" (P138).
16
Pins support all the load acting on the chain, together with inner and outer plates, and when the chain is engaged with a sprocket,
the pins slide as bearings. They are required to be high in shearing strength and bending strength, and especially wear resistance.
Bushings act to prevent the shock received through rollers when the chain is engaged with a sprocket from being directly transmitted to
pins, and also act as bearings, along with the pins. So, they are required to be high in shock fatigue strength and wear resistance.
Rollers act to smoothly bend the chain when the chain is engaged with a sprocket, to protect the chain from shock
with the sprocket. They are required to be high in shock fatigue strength, collapse strength and wear resistance.
Plates are subject to repeated tension of the chain, and sometimes a large shock. So, they are required to be
high in tensile strength, and also in shock resistance and fatigue strength.
Inner plate
Inner link
Cotter pin
Bushing
Roller
Multiplex outer link
(in the case of duplex)
Outer plate
Inner plate
Rivet
Intermediate plate
Pin
Inner link
Pin
Outer plate
Outer plate
Offset link
Outer plate
Connecting pin
Connecting plate
Clip
Offset plate
Offset pin
Cotter pin
One-pitch offset link (OJ)
Connecting links
Outer plate
Spring pin type connecting pin
Connecting plate
Spring pin
In a standard spring pin type connecting link, the
connecting pins are interference-fitted with the
connecting plates (H connecting link). HI-PWR-S, HK and
HI-PWR-SHK series adopt this type.
Offset plate
Outer plate
Connecting pin
Connecting plate
Cotter pin
General
Components
A roller chain has a structure as illustrated below, and the names of the components are stated in the drawing. These
components act as described below, and are designed to suit the respective actions.
Standard
Roller Chain
Suitable uses
General use for driving and lifting equipment.
Examples
Driving transfer units and other equipment. For
multilevel parking.
18
10
80
HOME
APPLIANCE
Selection of chains
Sprockets
The standard roller chains can be engaged with standard
sprockets of the corresponding nominal numbers. For
sprockets, refer to the table of "Dimensions" for each size
of chain.
RJ
CJ
(DID 60 or smaller) (DID 80 or larger)
OJ
(except for DID 25)
2POJ
Dimensions
Chain No.
DID
DID
025
DID
035
DID 041
DID 040
DID 050
DID 060
DID 080
DID 100
DID 120
DID 140
DID 160
DID 180
DID 200
DID 240
JIS
Unit (mm)
Roller
Pitch Link Bush
Width Dia.
P
Transverse
Pitch
Pin
Plate
JIS
DID
DID
DID
Min. Tensile Min. Tensile Avg. Tensile Max. Allowable Approx. No. of
weight links per
Strength
Strength
Strength
Load
kg/m unit
kN kgf kN kgf kN kgf kN kgf
08.5
04.7
06.4
0.72
05.9
3.6
367 003.63
370 004.41
450
0.73
75 0.13
160
13.1
07.3
10.1
1.25
09.0
8.7
887 008.83
2.15
220 0.32
320
14.6
1.20
09.6
7.4
754 008.83
2.35
240 0.39
240
14.4
1.50
12.0
3.72
380 0.63
240
21.9
015.3 07.9
019.3 09.5
023.1 11.6
18.1
2.00
15.0
24
6.86
700 1.06
192
15.1
22.8
2.40
18.1
9.31
950 1.44
160
19.0
29.3
3.20
24.0
1,500 2.55
120
4.00
29.9
2,300 3.79
96
17.6
26.9
22.8
35.8
53.0 054.1
58.4 059.6
68.2 069.7
28.2
45.4
4.80
3,100 5.49
80
31.6
48.9
5.60
4,100 7.11
68
36.4
58.5
6.40
5,400 9.82
60
77.3 079.3
85.0 087.3
41.4
65.8
7.10
6,300 12.7
54
45.9
71.6
8.00
7,500 16.5
48
102.9 105.4
55.3
87.8
9.50
71.5 550.4 56,125 622.70 63,500 686.00 70,000 99.00 10,100 23.3
40
19
100
Temperature
Range in Use
Standard
Roller Chain
Tensile
strength index
Standard
Roller Chain
RJ
Dimensions
Chain No.
DID
JIS
Unit (mm)
Roller
Pitch Link Bush
Width Dia.
P
Transverse
Pitch
Pin
d
JIS
Plate
DID
DID
DID
DID25
25
07.8
08.5
3.6
367
3.63
370 4.41
450 0.73
75
0.13
DID25-2
25-2
14.4
15.0
7.2
734
7.26
740 8.82
900 1.17
120
0.26
DID25-3
25-3
20.8
21.4
10.8
1,350 1.76
180
0.39
DID25-4
25-4
27.2
27.8
14.4
1,800 2.35
240
0.52
DID25-5
25-5
33.7
34.3
18.0
2,250 2.84
290
0.65
6.35
3.18
3.30
2.31
3.9
4.7
6.4
0.72
5.9
5.2
Note: Values of average tensile strength and max. allowable load are for chain body.
of
Lu
No. of
bri
Teeth of
ca
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
pe
100
500
900 1200 1800 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 10000
A
11
12
13
0.04 0.18 0.31 0.40 0.58 0.77 0.91 1.05 1.03 0.86 0.74 0.64 0.56 0.50 0.44 0.40 0.36 0.33 0.30 0.26
0.05 0.20 0.34 0.44 0.63 0.85 1.00 1.15 1.17 0.98 0.84 0.73 0.64 0.57 0.51 0.46 0.41 0.38 0.35 0.30
0.05 0.22 0.37 0.48 0.69 0.93 1.09 1.25 1.32 1.11 0.95 0.82 0.72 0.64 0.57 0.51 0.47 0.43 0.39 0.33
14
15
16
0.06 0.24 0.40 0.52 0.75 1.00 1.18 1.36 1.48 1.24 1.06 0.92 0.80 0.71 0.64 0.58 0.52 0.48 0.44 0.37
0.06 0.25 0.43 0.56 0.80 1.08 1.27 1.46 1.64 1.37 1.17 1.02 0.89 0.79 0.71 0.64 0.58 0.53 0.49 0.41
0.06 0.27 0.46 0.60 0.86 1.16 1.37 1.57 1.77 1.51 1.29 1.12 0.98 0.87 0.78 0.70 0.64 0.58 0.53 0.46
17
18
19
0.07 0.29 0.49 0.64 0.92 1.24 1.46 1.67 1.89 1.66 1.41 1.23 1.08 0.95 0.85 0.77 0.70 0.64 0.59 0.50
0.07 0.31 0.52 0.68 0.98 1.32 1.55 1.78 2.01 1.81 1.54 1.34 1.17 1.04 0.93 0.84 0.76 0.70 0.64 0.54
0.08 0.33 0.56 0.72 1.04 1.40 1.64 1.89 2.13 1.96 1.67 1.45 1.27 1.13 1.01 0.91 0.83 0.75 0.69 0.59
20
21
22
0.08 0.35 0.59 0.76 1.10 1.47 1.74 2.00 2.25 2.11 1.81 1.56 1.37 1.22 1.09 0.98 0.89 0.81 0.75 0.64
0.09 0.37 0.62 0.80 1.16 1.55 1.83 2.10 2.37 2.27 1.94 1.68 1.48 1.31 1.17 1.06 0.96 0.88 0.80 0.69
0.09 0.38 0.65 0.84 1.22 1.63 1.93 2.21 2.50 2.44 2.08 1.81 1.58 1.40 1.26 1.13 1.03 0.94 0.86 0.74
23
24
25
0.09 0.40 0.68 0.89 1.28 1.71 2.02 2.32 2.62 2.61 2.23 1.93 1.69 1.50 1.34 1.21 1.10 1.00 0.92 0.79
0.10 0.42 0.72 0.93 1.34 1.80 2.12 2.43 2.74 2.78 2.37 2.06 1.81 1.60 1.43 1.29 1.17 1.07 0.98 0.84
0.10 0.44 0.75 0.97 1.40 1.88 2.21 2.54 2.86 2.95 2.52 2.19 1.92 1.70 1.52 1.37 1.25 1.14 1.04 0.89
28
30
32
0.12 0.50 0.85 1.10 1.58 2.12 2.50 2.87 3.24 3.50 2.99 2.59 2.27 2.02 1.81 1.63 1.48 1.35 1.24 1.06
0.13 0.54 0.91 1.18 1.70 2.28 2.69 3.09 3.49 3.88 3.32 2.87 2.52 2.24 2.00 1.81 1.64 1.50 1.37 1.17
0.14 0.58 0.98 1.27 1.82 2.45 2.89 3.32 3.74 4.16 3.65 3.17 2.78 2.46 2.21 1.99 1.81 1.65 1.51 1.29
35
40
45
0.15 0.63 1.08 1.39 2.01 2.70 3.18 3.65 4.12 4.58 4.18 3.62 3.18 2.82 2.52 2.27 2.06 1.89 1.73 1.48
0.17 0.73 1.24 1.61 2.32 3.12 3.67 4.22 4.76 5.29 5.11 4.43 3.88 3.44 3.08 2.78 2.52 2.30 2.11 1.81
0.20 0.83 1.41 1.83 2.63 3.54 4.17 4.79 5.40 6.01 6.09 5.28 4.63 4.11 3.68 3.32 3.01 2.75 2.52 2.15
Note: Values in the table above are for single strand chains only. For multiplex chains, please apply the coefficient of multi-strand. (See "Chain Selection" on P120).
20
DC
DH
Standard
Roller Chain
DP D0
DS
Number of
Teeth
N
Pitch Dia
Tip Dia
DP
DO
Root Dia
DS
Caliper Dia
DC
DH
11
12
13
14
15
22.54
24.53
26.53
28.54
30.54
25
28
30
32
34
19.24
21.23
23.23
25.24
27.24
19.01
21.23
23.04
25.24
27.07
15
17
19
21
23
16
17
18
19
20
32.55
34.56
36.57
38.58
40.59
36
38
40
42
44
29.25
31.26
33.27
35.28
37.29
29.25
31.11
33.27
35.15
37.29
25
27
29
31
33
21
22
23
24
25
42.61
44.62
46.63
48.65
50.66
46
48
50
52
54
39.31
41.32
43.33
45.35
47.36
39.19
41.32
43.23
45.35
47.27
35
37
39
41
43
26
27
28
29
30
52.68
54.70
56.71
58.73
60.75
56
58
60
62
64
49.38
51.40
53.41
55.43
57.45
49.38
51.30
53.41
55.35
57.45
45
47
49
51
53
31
32
33
34
35
62.77
64.78
66.80
68.82
70.84
66
68
70
72
74
59.47
61.48
63.50
65.52
67.54
59.39
61.48
63.43
65.52
67.47
55
57
59
61
63
36
37
38
39
40
72.86
74.88
76.90
78.91
80.93
76
78
80
82
84
69.56
71.58
73.60
75.61
77.63
69.56
71.51
73.60
75.55
77.63
65
67
70
72
74
41
42
43
44
45
82.95
84.97
86.99
89.01
91.03
87
89
91
93
95
79.65
81.67
83.69
85.71
87.73
79.59
81.67
83.63
85.71
87.68
76
78
80
82
84
48
50
54
55
97.09
101.13
109.21
111.23
101
105
113
115
93.79
97.83
105.91
107.93
93.79
97.83
105.91
107.88
90
94
102
104
60
65
70
75
121.33
131.43
141.54
151.64
125
135
145
155
118.03
128.13
138.24
148.34
118.03
128.10
138.24
148.31
114
124
134
144
21
Standard
Roller Chain
RJ
CJ
(Special Order)
Dimensions
Chain No.
DID
JIS
Unit (mm)
Roller
Pitch Link Bush
Width Dia.
P
Pin
35
DID35
Transvers
e Pitch
JIS
Plate
T
DID
DID
DID
8.7
887
8.83
900 11.2
1,150 2.15
220
0.32
17.4
2,300 3.62
370
0.69
26.1
3,450 5.39
550
1.05
DID35-2 35-2
DID35-3 35-3
DID35-4 35-4
34.8
4,600 7.06
720
1.41
DID35-5 35-5
43.5
5,750 8.33
850
1.77
6.0
7.3
7.4
10.1 1.25
9.0
7.75
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
Lu
bri
100
500
900
1200 1800 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 10000
11
12
13
0.17
0.19
0.21
0.74
0.81
0.89
1.26
1.38
1.50
1.63
1.79
1.95
2.34
2.57
2.81
2.88
3.28
3.70
2.19
2.50
2.82
1.74
1.98
2.23
14.2
1.62
1.83
1.19
1.36
1.53
1.02
1.16
1.31
0.88
1.01
1.13
0.77
0.88
1.00
0.69
0.78
0.88
0.61
0.70
0.79
0.55
0.63
0.71
0.50
0.57
0.65
0.46
0.52
0.59
0.42
0.48
0.54
0.36
0.41
0.46
14
15
16
0.23
0.24
0.26
0.96
1.03
1.11
1.63
1.76
1.88
2.11
2.27
2.44
3.04
3.28
3.51
4.09
4.40
4.72
3.15
3.49
3.84
2.50
2.77
3.05
2.04
2.27
2.50
1.71
1.90
2.09
1.46
1.62
1.79
1.27
1.41
1.55
1.11
1.23
1.36
0.99
1.09
1.21
0.88
0.98
1.08
0.80
0.88
0.97
0.72
0.80
0.88
0.66
0.73
0.81
0.61
0.67
0.74
0.52
0.57
0.63
17
18
19
0.28
0.30
0.31
1.18
1.26
1.33
2.01
2.14
2.27
2.60
2.77
2.94
3.75
3.99
4.23
5.04
5.36
5.68
4.21
4.59
4.97
3.34
3.64
3.95
2.73
2.98
3.23
2.29
2.50
2.71
1.96
2.13
2.31
1.70
1.85
2.00
1.49
1.62
1.76
1.32
1.44
1.56
1.18
1.29
1.40
1.07
1.16
1.26
0.97
1.05
1.14
0.88
0.96
1.04
0.81
0.88
0.96
0.69
0.75
0.82
20
21
22
0.33
0.35
0.37
1.41
1.49
1.56
2.39
2.52
2.65
3.10
3.27
3.44
4.47
4.71
4.95
6.01
6.33
6.66
5.37
5.78
6.20
4.26
4.59
4.92
3.49
3.75
4.03
2.92
3.15
3.37
2.50
2.69
2.88
2.16
2.33
2.50
1.90
2.04
2.19
1.68
1.81
1.94
1.51
1.62
1.74
1.36
1.46
1.57
1.23
1.33
1.42
1.13
1.21
1.30
1.03
1.11
1.19
0.88
0.95
1.02
23
24
25
0.39
0.40
0.42
1.64
1.72
1.80
2.78
2.92
3.05
3.61
3.78
3.95
5.20
5.44
5.69
6.98
7.31
7.64
6.63
7.06
7.51
5.26
5.60
5.96
4.30
4.59
4.88
3.61
3.84
4.09
3.08
3.28
3.49
2.67
2.84
3.02
2.34
2.50
2.65
2.08
2.21
2.35
1.86
1.98
2.11
1.68
1.79
1.90
1.52
1.62
1.72
1.39
1.48
1.57
1.27
1.36
1.44
1.09
1.16
1.23
28
30
32
0.48
0.51
0.55
2.03
2.19
2.34
3.44
3.71
3.98
4.46
4.81
5.15
6.43
6.92
7.42
8.64
9.31
9.98
8.90
9.87
10.9
7.06
7.83
8.63
5.78
6.41
7.06
4.84
5.37
5.92
4.14
4.59
5.05
3.58
3.98
4.38
3.15
3.49
3.84
2.79
3.09
3.41
2.50
2.77
3.05
2.25
2.50
2.75
2.04
2.27
2.50
1.87
2.07
2.28
1.71
1.90
2.09
1.46
1.62
1.79
35
40
45
0.61
0.70
0.80
2.58
2.98
3.39
4.38
5.06
5.57
5.68
6.56
7.45
8.18
9.45
10.7
11.0
12.7
14.4
12.4
15.0
17.0
9.87
12.1
14.4
8.08
9.87
11.8
6.77
8.27
9.87
5.78
7.06
8.43
5.01
6.12
7.30
4.40
5.37
6.41
3.90
4.76
5.68
3.49
4.26
5.09
3.15
3.84
4.59
2.86
3.49
2.61
2.39
ca
tio
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P.120).
22
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type welded)
Flat Plain
(A type)
Unit (mm)
Tip dia.
(Length) L
Approx.
weight
Kg
Approx.
weight
Kg
9
10
27.85
30.82
32
34
8
8
11
12
22
25
20
20
0.06
0.08
8
8
0.02
9
10
11
12
13
14
15
33.81
36.80
39.80
42.81
45.81
38
40
44
46
51
8
8
9
9
9
14
16.5
18
16.5
19
27
31
32
30
35
20
20
20
20
20
0.09
0.12
0.12
0.12
0.16
9.5
9.5
9.5
9.5
9.5
0.03
0.03
0.04
0.04
0.05
11
12
13
14
15
16
17
18
19
20
48.82
51.84
54.85
57.87
60.89
53
57
60
63
66
9
11
11
11
11
20
24
24.5
28.5
30
37
41
44
47
50
20
20
20
20
20
0.19
0.22
0.25
0.28
0.32
9.5
12
12
12
12
0.05
0.07
0.07
0.09
0.09
16
17
18
19
20
21
22
23
24
25
63.91
66.93
69.95
72.97
76.00
69
72
75
78
81
11
11
11
11
11
32
32
32
32
32
53
53
53
53
53
20
20
20
22
22
0.36
0.37
0.38
0.43
0.44
12
12
12
12
12
0.11
0.11
0.11
0.14
0.16
21
22
23
24
25
26
27
28
29
30
79.02
82.05
85.07
88.08
91.12
83
87
90
93
96
11
11
11
11
11
32
32
32
32
32
53
53
53
53
53
22
22
22
22
22
0.45
0.46
0.48
0.49
0.51
12
12
12
12
12
0.16
0.17
0.18
0.20
0.23
26
27
28
29
30
31
32
33
34
35
94.16
97.18
100.20
103.23
106.26
99
102
105
109
112
11
11
11
11
11
32
32
32
32
32
53
53
53
53
53
22
22
22
22
22
0.52
0.54
0.55
0.57
0.59
12
12
12
12
12
0.24
0.27
0.28
0.29
0.30
36
37
38
39
40
109.29
112.32
115.34
118.36
121.40
115
117
121
123
127
11
11
11
11
11
32
42
42
42
42
53
62
62
62
62
22
22
25
25
25
0.61
0.82
0.82
0.83
0.85
13
13
13
13
13
0.32
0.37
0.41
0.42
0.43
41
42
43
44
45
124.43
127.46
130.48
133.53
136.55
129
132
135
138
142
12
12
12
12
12
42
42
42
42
42
62
62
62
62
62
25
25
25
25
25
0.85
0.86
0.87
0.90
0.95
13
0.47
13
0.52
48
50
54
55
60
145.64
151.69
163.81
166.85
182.00
151
157
169
172
187
12
12
12
12
12
42
42
42
42
42
62
62
62
62
62
25
25
25
25
25
1.00
1.05
1.20
1.22
1.30
13
13
13
0.55
0.59
0.69
13
0.87
65
70
75
197.15
212.30
227.46
202
218
233
12
12
12
42
45
45
67
67
67
25
25
25
1.50
1.70
1.80
DP
Bore d
DO
Stock
Hub
Max.
(Dia.) DH
Stock
Material
S35C
SS400
Welded
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
3. Those marked * have slot on hub.
23
Material
SS400
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
48
50
54
55
60
65
70
75
Standard
Roller Chain
Standard
Roller Chain
Dimensions
Chain No.
DID
JIS
Unit (mm)
Roller
Pitch Link Roller
Width dia.
P
Pin
d
Plate
e
DID 41
JIS
7.9
8.5 1.20
9.6
8.0
DID
DID
DID
Strength
Strength
Strength
Load
kg/m
kN kgf kN kgf kN kgf kN kgf
7.40 754 8.83 900 10.7 1,100 2.35 240 0.39
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
Lu
bri
50
200
400
600
900
1200 1800 2400 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 9000
11
12
13
0.11
0.12
0.14
0.40
0.43
0.47
0.74
0.81
0.88
1.06
1.17
1.27
1.53
1.68
1.84
1.28
1.45
1.64
0.69
0.79
0.89
0.45
0.51
0.58
0.32
0.37
0.41
0.26
0.29
0.33
0.21
0.24
0.27
0.18
0.20
0.23
0.15
0.17
0.19
0.13
0.15
0.17
0.11
0.13
0.15
0.10
0.12
0.13
0.09
0.10
0.12
0.08
0.09
0.10
0.07
0.08
0.10
14
15
16
0.15
0.16
0.17
0.51
0.55
0.59
0.96
1.03
1.11
1.38
1.49
1.59
1.99
2.14
2.30
1.83
2.03
2.24
1.00
1.11
1.22
0.65
0.72
0.79
0.46
0.51
0.57
0.37
0.41
0.45
0.30
0.33
0.37
0.25
0.28
0.31
0.22
0.24
0.26
0.19
0.21
0.23
0.16
0.18
0.20
0.15
0.16
0.18
0.13
0.14
0.16
0.12
0.13
0.14
0.11
17
18
19
0.18
0.19
0.21
0.63
0.67
0.71
1.18
1.26
1.33
1.70
1.81
1.92
2.45
2.61
2.77
2.45
2.67
2.90
1.33
1.45
1.58
0.87
0.94
1.02
0.62
0.68
0.73
0.49
0.54
0.58
0.40
0.44
0.48
0.34
0.37
0.40
0.29
0.31
0.34
0.25
0.27
0.30
0.22
0.24
0.26
0.19
0.21
0.23
0.17
0.19
0.21
0.16
0.17
0.19
20
21
22
0.22
0.23
0.24
0.76
0.80
0.84
1.41
1.49
1.56
2.03
2.14
2.25
2.92
3.08
3.24
3.13
3.36
3.61
1.70
1.83
1.96
1.11
1.19
1.28
0.79
0.85
0.91
0.63
0.68
0.72
0.51
0.55
0.59
0.43
0.46
0.50
0.37
0.40
0.42
0.32
0.34
0.37
0.28
0.30
0.32
0.25
0.27
0.29
0.22
0.24
0.26
0.20
0.22
23
24
25
0.25
0.26
0.28
0.88
0.92
0.96
1.64
1.72
1.79
2.36
2.47
2.58
3.40
3.56
3.72
3.86
4.11
4.37
2.10
2.24
2.38
1.36
1.45
1.54
0.98
1.04
1.11
0.77
0.83
0.88
0.63
0.68
0.72
0.53
0.57
0.60
0.45
0.48
0.51
0.39
0.42
0.45
0.34
0.37
0.39
0.31
0.33
0.35
0.27
0.29
28
30
32
0.31
0.34
0.36
1.09
1.17
1.25
2.03
2.18
2.34
2.92
3.14
3.37
4.20
4.53
4.86
5.18
5.74
6.29
2.82
3.13
3.44
1.83
2.03
2.24
1.31
1.45
1.60
1.04
1.15
1.27
0.85
0.94
1.04
0.71
0.79
0.87
0.61
0.68
0.74
0.53
0.59
0.64
0.46
0.51
0.57
0.41
35
40
45
0.40
0.46
0.52
1.38
1.60
1.81
2.58
2.98
3.38
3.71
4.29
4.87
5.35
6.18
7.02
6.93
8.01
9.09
3.94
4.81
5.74
2.56
3.13
3.73
1.83
2.24
2.67
1.45
1.78
2.12
1.19
1.45
1.73
1.00
1.22
1.45
0.85
1.04
0.74
ca
tio
24
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Flat plain
(A type)
Unit (mm)
DO
Number
Approx.
Stock Approx.
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
Hub
9
10
37.13
41.10
42
46
9
9
15
16
28
32
22
22
0.11
0.14
9
9
0.05
9
10
11
12
13
14
15
45.08
49.07
53.07
57.07
61.08
51
53
58
63
67
10
10
13
13
13
20
22
20
24
28
37
40
37
42
46
22
22
22
22
22
0.19
0.22
0.23
0.28
0.34
10
10
13
13
13
0.06
0.10
0.10
0.11
0.15
11
12
13
14
15
16
17
18
19
20
65.10
69.12
73.14
77.16
81.18
71
75
78
83
88
13
13
13
13
14
30
32
35
39
45
50
54
57
62
67
22
22
22
22
25
0.40
0.46
0.51
0.59
0.76
13
13
13
13
14
0.17
0.20
0.20
0.26
0.26
16
17
18
19
20
21
22
23
24
25
85.21
89.24
93.27
97.30
101.33
92
96
98
104
108
14
14
14
14
14
45
50
50
42
42
71
75
77
63
63
25
25
25
25
25
0.85
0.95
1.00
0.81
0.88
14
14
14
14
14
0.30
0.30
0.35
0.37
0.40
21
22
23
24
25
26
27
28
29
30
105.36
109.40
113.43
117.46
121.50
112
116
120
124
128
14
14
14
14
14
42
42
42
42
42
63
63
63
63
63
25
25
25
25
25
0.92
0.96
1.00
1.10
1.10
14
14
14
14
14
0.35
0.50
0.51
0.51
0.60
26
27
28
29
30
31
32
33
34
35
125.53
129.57
133.61
137.64
141.68
132
137
140
145
149
14
14
14
14
14
45
45
45
45
45
63
68
68
68
68
25
28
28
28
28
1.20
1.30
1.30
1.30
1.40
14
14
14
14
14
0.61
0.68
0.70
0.75
0.83
36
37
38
39
40
145.72
149.75
153.79
157.83
161.87
153
157
161
165
169
17
17
17
17
17
45
45
45
45
45
67
67
67
67
67
28
28
28
28
28
1.40
1.50
1.50
1.60
1.60
17
17
17
17
17
0.90
0.93
0.95
1.05
1.06
36
37
38
39
40
41
42
43
44
45
165.91
169.95
173.98
178.02
182.06
173
177
181
185
189
17
17
17
17
17
45
48
48
48
48
72
72
72
72
72
32
32
32
32
32
17
17
17
17
17
1.15
1.20
1.23
1.30
1.36
41
42
43
44
45
48
50
54
60
65
194.18
202.26
218.42
242.66
262.87
201
209
226
250
270
17
17
17
17
17
48
48
48
48
55
72
72
72
72
82
32
32
32
32
32
1.70
2.00
2.10
2.20 SS400
2.20 Welded
2.30
2.40
2.80
3.20
3.90
17
17
17
17
17
1.53
1.70
2.00
2.50
2.87
48
50
54
60
65
70
72
75
283.07
291.16
303.28
290
299
311
19
19
19
55
55
55
82
82
82
32
32
32
4.30
4.80
5.00
19
19
19
3.30
3.40
4.50
70
72
75
S35C
SS400
31
32
33
34
35
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. Shaded area of the above dimension table indicates heat treated teeth.
3. Those marked * have slot on hub.
25
Standard
Roller Chain
T
F
WE L
FC
E
e
Standard
Roller Chain
C
F
H
E
C
f
RJ
CJ
(Special Order)
2POJ
OJ
Dimensions
Chain No.
DID
JIS
Unit (mm)
Roller
Pitch Link Roller
Width dia.
P
40
DID40
Transverse
Pitch
Pin
d
JIS
Plate
T
DID40-3 40-3
DID
DID
DID40-2 40-2
DID
15.2
1,950 3.72
380
0.63
30.4
3,900 6.27
640
1.19
45.6
5,850 9.31
950
1.78
DID40-4 40-4
60.8
7,800 12.2
1,250
2.37
DID40-5 40-5
76.0
9,750 14.5
1,480
2.96
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
Lu
bri
ca
tio
50
n
200
400
600
900
1200 1800 2400 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 9000
11
12
13
0.20
0.22
0.24
0.70
0.77
0.84
1.30
1.43
1.56
1.88
2.06
2.25
2.71
2.97
3.24
3.51
3.85
4.20
3.48
3.96
4.47
2.26
2.57
2.90
1.62
1.84
2.08
1.28
1.46
1.65
1.05
1.20
1.35
0.88
1.00
1.13
0.75
0.86
0.97
0.65
0.74
0.84
0.57
0.65
0.73
0.51
0.58
0.65
0.45
0.52
0.58
0.41
0.47
0.53
0.37
0.42
0.48
14
15
16
0.26
0.28
0.30
0.91
0.98
1.05
1.69
1.82
1.96
2.44
2.63
2.82
3.51
3.78
4.06
4.55
4.90
5.26
5.00
5.54
6.10
3.24
3.60
3.96
2.32
2.57
2.84
1.84
2.04
2.25
1.51
1.67
1.84
1.26
1.40
1.54
1.08
1.20
1.32
0.94
1.04
1.14
0.82
0.91
1.00
0.73
0.81
0.89
0.65
0.72
0.80
0.59
0.65
0.72
0.53
17
18
19
0.32
0.34
0.36
1.12
1.19
1.26
2.09
2.22
2.35
3.01
3.20
3.39
4.33
4.61
4.89
5.61
5.97
6.33
6.68
7.28
7.90
4.34
4.73
5.13
3.11
3.38
3.67
2.47
2.69
2.91
2.02
2.20
2.38
1.69
1.84
2.00
1.44
1.57
1.71
1.25
1.36
1.48
1.10
1.20
1.30
0.97
1.06
1.15
0.87
0.95
1.03
0.79
0.86
0.93
20
21
22
0.38
0.40
0.42
1.33
1.41
1.48
2.49
2.62
2.76
3.58
3.78
3.97
5.16
5.44
5.72
6.69
7.05
7.41
8.53
9.18
9.84
5.54
5.96
6.39
3.96
4.27
4.57
3.15
3.38
3.63
2.57
2.77
2.97
2.16
2.32
2.49
1.84
1.98
2.13
1.60
1.72
1.84
1.40
1.51
1.62
1.24
1.34
1.43
1.11
1.20
1.28
1.00
1.08
23
24
25
0.45
0.47
0.49
1.55
1.62
1.70
2.89
3.03
3.17
4.17
4.37
4.56
6.00
6.29
6.57
7.78
8.15
8.51
10.5
11.2
11.9
6.83
7.28
7.74
4.89
5.21
5.54
3.88
4.14
4.40
3.18
3.38
3.60
2.66
2.84
3.02
2.27
2.42
2.57
1.97
2.10
2.23
1.73
1.84
1.96
1.53
1.63
1.74
1.37
1.46
28
30
32
0.55
0.59
0.64
1.92
2.07
2.22
3.58
3.86
4.13
5.16
5.55
5.96
7.43
8.00
8.58
9.62
10.4
11.1
13.9
14.9
16.0
9.18
10.2
11.2
6.57
7.28
8.02
5.21
5.78
6.37
4.27
4.73
5.21
3.57
3.96
4.37
3.05
3.38
3.73
2.65
2.93
3.23
2.32
2.57
2.84
2.06
35
40
45
0.70
0.81
0.92
2.44
2.82
3.20
4.55
5.26
5.98
6.56
7.58
8.61
9.45
10.9
12.4
12.2
14.1
16.1
17.6
20.4
23.1
12.8
15.7
18.7
9.18
11.2
13.4
7.28
8.90
10.6
5.96
7.28
8.69
5.00
6.10
7.28
4.27
5.21
3.70
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120).
26
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Double sprocket
with hub on one side
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Unit (mm)
DP
DO
37.13
41.10
45.08
49.07
53.07
57.07
61.08
65.10
69.12
73.14
77.16
81.18
85.21
89.24
93.27
97.30
101.33
105.36
109.40
113.43
117.46
121.50
125.53
129.57
133.61
137.64
141.68
145.72
149.75
153.79
157.83
161.87
165.91
169.95
173.98
178.02
182.06
194.18
202.26
218.42
242.66
262.87
283.07
291.16
303.28
42
46
51
53
58
63
67
71
75
78
83
88
92
96
98
104
108
112
116
120
124
128
132
137
140
145
149
153
157
161
165
169
173
177
181
185
189
201
209
226
250
270
290
299
311
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
9
9
10
10
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
19
19
19
15
16
20
22
20
24
28
30
32
35
39
45
45
50
50
42
42
42
42
42
42
42
45
45
45
45
45
45
45
45
45
45
45
48
48
48
48
48
48
48
48
55
55
55
55
Hub
28
32
37
40
37
42
46
50
54
57
62
67
71
75
77
63
63
63
63
63
63
63
63
68
68
68
68
67
67
67
67
67
72
72
72
72
72
72
72
72
72
82
82
82
82
22
22
22
22
22
22
22
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
28
28
28
28
28
28
28
28
28
32
32
32
32
32
32
32
32
32
32
32
32
32
0.11
0.14
0.19
0.22
0.23
0.28
0.34
0.40
0.46
0.51
0.59
0.76
0.85
0.95 S35C
1.00
0.81
0.88
0.92
0.96
1.00
1.10
1.10
1.20
1.30
1.30
1.30
1.40
1.40
1.50
1.50
1.60
1.60
1.70
2.00
2.10
2.20 SS400
2.20 Welded
2.30
2.40
2.80
3.20
3.90
4.30
4.80
5.00
13
14
14
14
14
14
14
14
14
14
14
14
14
18
18
18
20
24
28
30
32
35
39
45
47
50
50
55
59
62
32
37
42
46
50
54
57
62
67
71
75
77
83
87
91
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
0.34
0.39
0.47
0.56
0.65
0.75
0.85
0.98
1.30
1.40
1.60
1.70
1.90
2.10
2.30
18
73
106
40
3.00
17
17
17
17
17
55
55
63
63
63
83
83
93
93
93
50
50
S35C
3.10
3.60
50
4.60
50
50
SS400
5.80 Welded
6.70
9
9
10
10
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
19
19
19
0.05
0.06
0.10
0.10
0.11
0.15
0.17
0.20
0.20
0.26
0.26
0.30
0.30
0.35
0.37
0.40
0.35
0.50
0.51
0.51
0.60
0.61
0.68
0.70
0.75
0.83
0.90
0.93
0.95
1.05
1.06
1.15
1.20
1.23
1.30
1.36
1.53
1.70
2.00
2.50
2.87
3.30
3.40
4.50
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
SS400
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
48
50
54
60
65
70
72
75
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
3. Due to material availability and production reasons, forget S35C may be used for teeth portion and SS400 for hub and welded for double sprockets
with 31 ~ 40 teeth without notice.
4. Those marked * have slot on hub.
27
WE L
FC
E
e
Standard
Roller Chain
C
F
H
E
C
f
RJ
CJ
(Special Order)
2POJ
OJ
Dimensions
Chain No.
DID
DID50
JIS
Unit (mm)
Roller
Pitch Link Roller
Width dia.
P
Transver
se Pitch
Pin
50
DID50-2 50-2
JIS
Plate
T
DID
DID
DID
24
3,150 6.86
700
1.06
48
2.04
DID50-3 50-3 15.875 9.53 10.16 5.09 56.7 58.3 58.5 59.5 10.2 11.6 12.1 18.1 2.00 15.0 13.0
72
3.06
DID50-4 50-4
96
4.06
DID50-5 50-5
120
5.08
Note: The values of average tensile strength and Max. allowable tension are for chains.
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
50
11
12
13
0.48
0.53
0.58
0.90
0.99
1.08
2.42
2.65
2.89
3.83
4.20
4.58
6.49
7.13
7.78
7.64
8.71
9.82
5.47
6.23
7.02
4.16
4.74
5.34
3.30
3.76
4.24
2.70
3.08
3.47
2.26
2.58
2.91
1.93
2.20
2.48
1.68
1.91
2.15
1.53
1.75
1.97
1.26
1.43
1.61
1.05
1.20
1.35
0.09
1.02
1.15
0.80
0.91
1.03
14
15
16
0.63
0.67
0.72
1.17
1.26
1.35
3.14
3.38
3.62
4.96
5.35
5.74
8.43
9.08
9.73
10.9
11.8
12.6
7.85
8.71
9.59
5.97
6.62
7.30
4.74
5.26
5.79
3.88
4.30
4.74
3.25
3.61
3.97
2.78
3.08
3.39
2.41
2.67
2.94
2.20
2.44
2.69
1.80
2.00
2.20
1.51
1.68
1.85
1.29
1.43
1.58
1.15
1.27
1.40
17
18
19
0.77
0.82
0.87
1.44
1.53
1.62
3.87
4.11
4.36
6.12
6.51
6.90
10.4
11.1
11.7
13.5
14.3
15.2
10.5
11.4
12.4
7.99
8.71
9.44
6.34
6.91
7.49
5.19
5.65
6.13
4.35
4.74
5.14
3.71
4.05
4.39
3.22
3.51
3.80
2.95
3.21
3.48
2.41
2.63
2.85
2.02
2.20
2.39
1.73
1.88
2.04
1.54
20
21
22
0.92
0.97
1.02
1.71
1.81
1.90
4.61
4.86
5.11
7.30
7.69
8.09
12.4
13.1
13.7
16.1
16.9
17.8
13.4
14.4
15.5
10.2
11.0
11.8
8.09
8.71
9.34
6.62
7.13
7.64
5.55
5.97
6.40
4.74
5.10
5.47
4.11
4.42
4.74
3.76
4.05
4.34
3.08
3.31
3.55
2.58
2.78
2.98
2.20
2.37
2.54
23
24
25
1.07
1.12
1.17
1.99
2.09
2.18
5.36
5.61
5.86
8.49
8.89
9.29
14.4
15.1
15.8
18.7
19.5
20.4
16.5
17.6
18.7
12.6
13.4
14.3
9.98
10.6
11.3
8.17
8.71
9.26
6.84
7.30
7.76
5.84
6.23
6.62
5.07
5.40
5.74
4.64
4.94
5.26
3.80
4.05
4.30
3.18
3.39
3.61
28
30
32
1.32
1.42
1.53
2.47
2.66
2.85
6.63
7.14
7.66
10.5
11.3
12.1
17.8
19.2
20.6
23.1
24.9
26.7
22.2
24.6
27.1
16.9
18.7
20.6
13.4
14.9
16.4
11.0
12.2
13.4
9.19
10.2
11.2
7.85
8.71
9.59
6.80
7.55
8.31
6.23
6.91
7.61
5.10
5.65
6.23
35
40
45
1.68
1.94
2.21
3.14
3.62
4.12
8.43
9.74
11.1
13.4
15.4
17.5
22.7
26.2
29.7
29.4
33.9
38.5
31.0
37.9
45.2
23.6
28.8
34.4
18.7
22.9
27.3
15.3
18.7
22.4
12.9
15.7
18.7
11.0
13.4
16.0
9.51
11.6
13.9
8.71
10.6
7.13
100
300
500
900
1200 1500 1800 2100 2400 2700 3000 3300 3500 4000 4500 5000 5400 5800 6200
C
0.72
0.82
0.92
Note: Values in the table above are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120).
28
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Double sprocket
with hub on one side
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Unit (mm)
DP
DO
46.21
51.38
56.35
61.34
66.34
71.34
76.35
81.37
86.39
91.42
96.45
101.48
106.51
111.55
116.58
121.62
126.66
131.70
136.74
141.79
146.83
151.87
156.92
161.96
167.01
172.05
177.10
182.14
187.19
192.24
197.29
202.33
207.38
212.43
217.48
222.53
227.58
242.73
252.83
273.02
303.33
328.58
353.84
363.94
379.10
53
58
63
68
73
79
84
89
94
99
104
109
114
119
124
129
134
139
144
149
154
160
165
170
175
180
185
191
196
201
206
211
216
221
226
231
237
252
262
282
312
338
363
373
388
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
10
10
13
13
13
13
13
13
13
13
13
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
20
20
20
19
22
24
32
32
32
35
40
45
47
47
47
47
47
47
47
47
48
48
48
48
48
48
48
48
48
48
55
55
55
55
55
55
55
55
55
55
55
55
55
55
63
63
63
63
Hub
34
40
46
51
51
52
57
62
67
72
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
82
82
82
82
82
82
82
82
82
82
82
82
82
82
92
92
92
92
25
25
25
25
25
25
25
25
25
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
0.20
0.27
0.33
0.41
0.46
0.52
0.62
0.72
0.83
1.00
1.10
1.20
1.20
1.30 S35C
1.30
1.40
1.50
1.50
1.50
1.60
1.60
1.70
1.80
1.80
1.90
2.10
2.20
2.70
2.80
2.90
2.90
3.10
3.20
3.30
3.40
3.50 SS400
3.60 Welded
4.00
4.30
4.80
5.60
6.90
7.70
14
14
14
14
14
14
14
14
18
18
18
18
18
18
18
24
28
32
35
39
45
47
52
55
60
63
67
70
75
63
42
47
52
57
62
67
72
79
82
89
92
99
102
109
93
40
40
40
40
45
45
45
45
45
45
50
50
50
50
50
0.60
0.73
0.87
1.00
1.30
1.50
1.70
2.00
2.20
2.50
2.90
3.30
3.60
S35C
4.00
3.40
18
63
93
50
4.00
18
19
19
19
19
8.60
63
66
66
66
66
93
98
98
98
98
50
56
56
63
63
4.80
6.20
7.30
SS400
9.90 Welded
11.70
10
10
13
13
13
13
13
13
13
13
13
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
20
20
0.11
0.15
0.18
0.18
0.20
0.26
0.30
0.35
0.40
0.44
0.50
0.54
0.59
0.65
0.70
0.80
0.85
0.90
1.00
1.10
1.15
1.20
1.26
1.35
1.45
1.55
1.67
1.80
1.85
2.00
2.05
2.12
2.30
2.43
2.60
2.60
3.00
3.30
3.90
4.80
5.80
6.35
6.60
7.00
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
SS400
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
48
50
54
60
65
70
72
75
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
3. Due to material availability and production reasons, forget S35C may be used for teeth portion and SS400 for hub and welded for double sprockets
with 26 ~ 31 teeth without notice.
4. Those marked * have slot on hub.
29
T
F
WE L
FC
E
e
Standard
Roller Chain
C
F
H
E
C
f
RJ
CJ
(Special Order)
2POJ
OJ
Dimensions
Chain No.
DID
JIS
Unit (mm)
Roller
Pitch Link Roller
Width dia.
P
Pin
60
DID60
DID60-2 60-2
DID60-3 60-3
Transver
se Pitch
JIS
Plate
T
DID
DID
DID
34.2
68.4
19.05 12.70 11.91 5.96 71.2 72.7 73.7 75.3 12.7 14.3 15.1 22.8 2.40 18.1 15.6 102.6 10,461 105.9 10,800 132
4,500 9.31
950
1.44
3.03
4.51
DID60-4 60-4
6.03
DID60-5 60-5
7.53
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
Lu
bri
ca
tio
50
n
100
200
500
700
900
1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3500 3800 4000 4600
11
12
13
0.75
0.83
0.90
1.40
1.54
1.68
2.62
2.88
3.14
5.98
6.57
7.16
8.09
8.89
9.69
10.2
11.2
12.2
8.84
10.1
11.4
7.02
7.99
9.01
5.74
6.54
7.38
4.81
5.48
6.18
4.11
4.68
5.28
3.56
4.06
4.58
3.13
3.56
4.02
2.77
3.16
3.56
2.48
2.83
3.19
2.24
2.55
2.87
1.77
2.02
2.28
1.57
1.79
2.02
1.45
1.66
1.87
14
15
16
0.98
1.05
1.13
1.82
1.96
2.11
3.40
3.66
3.93
7.76
8.36
8.96
10.5
11.3
12.1
13.2
14.2
15.2
12.7
14.1
15.5
10.1
11.2
12.3
8.24
9.14
10.1
6.91
7.66
8.44
5.90
6.54
7.21
5.11
5.67
6.25
4.49
4.98
5.48
3.98
4.41
4.86
3.56
3.95
4.35
3.21
3.56
3.92
2.55
2.83
3.11
2.25
2.50
2.75
2.09
2.31
2.55
17
18
19
1.20
1.28
1.36
2.25
2.39
2.53
4.19
4.46
4.73
9.57
10.2
10.8
13.0
13.8
14.6
16.2
17.3
18.3
17.0
18.5
20.1
13.5
14.7
15.9
11.0
12.0
13.0
9.25
10.1
10.9
7.89
8.60
9.33
6.84
7.45
8.08
6.01
6.54
7.10
5.33
5.80
6.29
4.77
5.19
5.63
4.30
4.68
5.08
3.41
3.72
4.03
3.01
3.28
3.56
2.79
3.04
3.30
20
21
22
1.44
1.51
1.59
2.68
2.82
2.97
5.00
5.27
5.54
11.4
12.0
12.6
15.4
16.3
17.1
19.4
20.4
21.5
21.7
23.3
25.0
17.2
18.5
19.9
14.1
15.2
16.2
11.8
12.7
13.6
10.1
10.8
11.6
8.73
9.39
10.1
7.66
8.24
8.84
6.80
7.31
7.84
6.08
6.54
7.02
5.48
5.90
6.33
4.35
4.68
5.02
3.85
4.14
4.44
23
24
25
1.67
1.75
1.83
3.12
3.26
3.41
5.81
6.09
6.36
13.3
13.9
14.5
18.0
18.8
19.6
22.5
23.6
24.6
26.7
28.5
30.3
21.2
22.6
24.0
17.4
18.5
19.7
14.6
15.5
16.5
12.4
13.2
14.1
10.8
11.5
12.2
9.45
10.1
10.7
8.38
8.93
9.50
7.50
7.99
8.50
6.76
7.21
7.66
5.37
5.72
6.08
28
30
32
2.06
2.22
2.38
3.85
4.15
4.45
7.19
7.75
8.30
16.4
17.7
18.9
22.2
23.9
25.6
27.8
30.0
32.2
35.9
38.9
41.7
28.5
31.6
34.8
23.3
25.9
28.5
19.5
21.7
23.9
16.7
18.5
20.4
14.5
16.0
17.7
12.7
14.1
15.5
11.3
12.5
13.8
10.1
11.2
12.3
9.08
10.1
11.1
7.21
35
40
45
2.63
3.03
3.45
4.90
5.66
6.43
9.15
10.6
12.0
20.9
24.1
27.4
28.3
32.6
37.1
35.4
40.9
46.5
45.9
53.0
60.2
39.8
48.7
58.1
32.6
39.8
47.5
27.3
33.4
39.8
23.3
28.5
34.0
20.2
24.7
29.5
17.7
21.7
25.9
15.7
19.2
22.9
14.1
17.2
12.7
Note: Values in the table above are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120).
30
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Double sprocket
with hub on one side
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Unit (mm)
DP
DO
55.70
61.65
67.62
73.60
79.60
85.61
91.62
97.65
103.67
109.71
115.74
121.78
127.82
133.86
139.90
145.95
151.99
158.04
164.09
170.14
176.20
182.25
188.30
194.35
200.41
206.46
212.52
218.57
224.63
230.69
236.74
242.80
248.86
254.92
260.98
267.03
273.09
291.27
303.39
327.63
363.99
394.30
424.61
436.73
454.92
63
68
76
82
88
93
99
107
113
119
126
132
138
144
150
156
162
168
174
180
186
193
199
205
211
217
223
229
236
241
248
253
260
266
272
278
284
302
314
338
375
405
436
448
466
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
Hub
10
14
14
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
24
30
32
32
35
39
45
47
47
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
63
63
63
63
63
63
63
63
63
75
75
43
49
51
51
57
62
68
73
73
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
83
93
93
93
93
93
93
93
93
93
107
107
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
0.40
0.49
0.60
0.69
0.81
0.96
1.10
1.30
1.40
2.00
2.10 S35C
2.20
2.31
2.43
2.50
2.50
2.70
2.90
3.00
3.10
3.30
3.40
3.50
3.70
3.80
4.00
4.20
4.40
4.60
4.80
4.90
5.10
5.50
SS400
6.00
Welded
6.20
6.40
6.70
7.40
7.80
8.80
10.60
12.80
14.40
20
75
107
45
16.30
16
18
18
18
18
18
18
20
20
20
20
20
20
20
20
32
35
39
45
50
55
59
63
69
75
78
66
66
66
66
51
57
62
68
76
82
87
95
101
107
113
98
98
98
98
50
50
56
56
56
56
56
56
56
56
56
56
56
56
56
1.10
1.30
1.70
2.00
2.40
2.80
3.10
3.60
4.10
4.50
5.00 S35C
4.60
4.80
5.00
5.00
20
66
98
56
6.50
20
20
20
20
20
66
66
75
75
75
98
98
107
107
107
56
56
71
71
71
7.80
9.70
SS400
12.80 Welded
18.00
21.50
10
10
14
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
0.20
0.26
0.30
0.37
0.43
0.51
0.60
0.68
0.75
0.88
0.96
1.10
1.15
1.20
1.40
1.51
1.65
1.70
1.90
2.05
2.25
2.40
2.55
2.70
2.90
3.12
3.21
3.45
3.56
3.83
4.05
4.22
4.37
4.61
4.89
5.68
5.75
6.25
7.25
9.00
10.60
12.20
12.50
13.00
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
SS400
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
48
50
54
60
65
70
72
75
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
3. Due to material availability and production reasons, forget S35C may be used for teeth portion and SS400 for hub and welded for double sprockets
with 23 ~ 35 teeth without notice.
4. Those marked * have slot on hub.
31
Standard
Roller Chain
CJ
(Special Order)
Dimensions
Chain No.
DID
DID80
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
Pin
d
80
15.88
15.88
7.94
DID
DID
DID
2.55
5.07
91.3 94.0 95.1 16.3 19.25 29.3 3.20 24.1 20.8 183.6 18,720 214.7 21,900 235
7.58
JIS
Plate
DID80-2 80-2
DID80-3 80-3
Transvers
e Pitch
DID80-4 80-4
DID80-5 80-5
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
20
50
A
100 200 300 400 500 700 900 1000 1200 1400 1600 1800 2000 2200 2400 2600 2700 2800 3000 3200 3400 3600 3800
B
11
12
13
1.13 2.12 3.95 7.37 10.6 13.8 16.8 22.8 17.1 14.6 11.1 8.83 7.23 6.06 5.17 4.48 3.93 3.49 3.30 3.12 2.82 2.56 2.33
1.25 2.33 4.34 8.10 11.7 15.1 18.5 25.0 19.5 16.7 12.7 10.1 8.24 6.90 5.89 5.11 4.48 3.98 3.76 3.56 3.21 2.91 2.66
1.36 2.54 4.73 8.83 12.7 16.5 20.1 27.3 22.0 18.8 14.3 11.4 9.29 7.78 6.64 5.76 5.05 4.48 4.24 4.01 3.62 3.28 3.00
14
15
16
1.47 2.75 5.13 9.56 13.8 17.9 21.8 29.5 24.6 21.0 16.0 12.7 10.4 8.70 7.43 6.44 5.65 5.01 4.73 4.48 4.04 3.67 3.35
1.59 2.96 5.52 10.3 14.8 19.2 23.5 31.8 27.3 23.3 17.7 14.1 11.5 9.65 8.24 7.14 6.27 5.56 5.25 4.97 4.48 4.07
1.70 3.17 5.92 11.1 15.9 20.6 25.2 34.1 30.1 25.7 19.5 15.5 12.7 10.6 9.07 7.86 6.90 6.12 5.78 5.48 4.94 4.48
17
18
19
1.82 3.39 6.32 11.8 17.0 22.0 26.9 36.4 32.9 28.1 21.4 17.0 13.9 11.6 9.94 8.61 7.56 6.70 6.34 6.00 5.41 4.91
1.93 3.60 6.72 12.6 18.1 23.4 28.6 38.7 35.9 30.6 23.3 18.5 15.1 12.7 10.8 9.38 8.24 7.30 6.90 6.54 5.89 5.35
2.05 3.82 7.13 13.3 19.2 24.8 30.3 41.1 38.9 33.2 25.3 20.1 16.4 13.8 11.7 10.2 8.93 7.92 7.49 7.09 6.39
20
21
22
2.16 4.04 7.33 14.1 20.3 26.2 32.1 43.4 42.0 35.9 27.3 21.7 17.7 14.9 12.7 11.0 9.65 8.55 8.08 7.65 6.90
2.28 4.26 7.94 14.8 21.4 27.7 33.8 45.8 45.2 38.6 29.4 23.3 19.1 16.0 13.6 11.8 10.4 9.20 8.70 8.24 7.43
2.40 4.48 8.35 15.6 22.5 29.1 35.6 48.1 48.5 41.4 31.5 25.0 20.4 17.1 14.6 12.7 11.1 9.87 9.33 8.83 7.96
23
24
25
2.52 4.70 8.76 16.4 23.6 30.5 37.3 50.5 51.8 44.2 33.7 26.7 21.9 18.3 15.6 13.6 11.9 10.6 9.97 9.44 3.66
2.63 4.92 9.17 17.1 24.7 31.9 39.1 52.9 55.2 47.2 35.9 28.5 23.3 19.5 16.7 14.5 12.7 11.3 10.6 10.1
2.75 5.14 9.59 17.9 25.8 33.4 40.8 55.2 58.7 50.1 38.1 30.3 24.8 20.8 17.7 15.4 13.5 12.0 11.3 10.7
28
30
32
3.11 5.81 10.8 20.2 29.1 37.7 46.1 62.4 69.6 59.4 45.2 35.9 29.4 24.6 21.0 18.2 16.0 14.2 13.4
3.35 6.26 11.7 21.9 31.4 40.1 49.7 67.3 77.2 65.9 50.1 39.8 32.6 27.3 23.3 20.2 17.7 15.7 6.03
3.59 6.71 12.5 23.4 33.6 43.6 53.3 72.1 85.0 72.6 55.2 43.8 35.9 30.1 25.7 22.2 19.5
35
40
45
3.96 7.39 13.8 25.7 37.1 48.0 58.7 79.5 97.2 83.0 63.2 50.4 41.0 34.4 29.4 25.4
4.57 8.54 15.9 29.7 42.8 55.5 67.8 91.8 115 101 77.2 61.2 50.1 42.0 35.9
5.19 9.69 18.1 33.8 48.6 63.0 77.0 104 131 121 92.1 73.1 59.8 50.1
Note: 1. Values in the table above are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Consult us when the ratings beyond the dotted line to rightward.
32
Single sprocket
with hub on one side
(Single B type)
Single sprocket
Double sprocket
with hub on one side
with hub on one side
(Single BW type Welded)
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Unit (mm)
DP
DO
74.27
82.19
90.16
98.14
106.14
114.15
122.17
130.20
138.23
146.27
154.32
162.37
170.42
178.48
186.54
194.60
202.66
210.72
218.79
226.86
234.93
243.00
251.07
259.14
267.21
275.29
283.36
291.43
299.51
307.58
315.66
323.74
331.81
339.89
347.97
356.04
364.12
388.36
404.52
436.84
485.33
525.73
566.15
606.56
85
93
101
110
118
126
134
142
151
159
167
175
183
192
200
208
216
224
233
241
249
257
265
273
281
289
297
306
314
322
330
338
346
354
362
370
378
403
419
451
500
540
581
621
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
35
0.87
58 40
11
11
9
0.97
40
52
0.58
17
17
10
32
1.20
40
60
0.62
17
17
11
38
1.50
40
67
0.55
17
17
2.50
63
67
23 45.5
12
45
1.90
40
77
0.87
17
17
3.10
63
77
23 50
13
48
2.00
40
77
1.02
17
17
3.70
63
86
23 58
14
50
2.59 S35C
40
93
1.20
20
20
4.30 S35C
63
93
23 64
15
63
2.78
40
93
1.35
20
20
5.50
71
102
23 70
16
63
3.00
40
93
1.54
20
20
6.40
71
110
23 76
17
63
3.20
40
93
1.75
20
20
6.00
71
98
23 66
18
63
3.40
40
93
1.95
20
20
6.50
71
98
23 66
19
63
3.60
40
93
2.15
20
20
7.60
71
107
23 75
20
63
3.80
40
93
2.41
20
20
7.80
71
107
23 75
21
63
4.80
45
2.63
20
20
8.80
71
117
20 80
22
75 107
5.10
45
2.90
20
20
9.30
71
117
20 80
23
75 107
5.40
45
3.20
20
20
80 10.50
117
20 80
24
75 107
5.60
45
3.45
20
20
80 11.10
117
20 80
25
75 107
5.90
45
3.70
20
20
80 11.70
117
20 80
26
75 107
6.10
45
3.96
20
20
27
75 107
6.50
45
4.26
20
20
28
75 107
6.90
45
4.65
20
20
29
75 107
7.10
45
5.00
20
20
80 14.20
117
20 80
30
75 107
SS400
7.40
45
5.30
20
20
31
75 107
7.80
45
5.60
20
20
32
75 107
8.10
45
6.00
20
20
33
75 107
8.50
45
6.40
20
20
34
75 107
8.90
45
6.85
20
20
80 17.90
117
20 80
35
75 107
50 10.10
7.20
20
20
36
80 117
SS400
50 10.50 SS400
7.40
20
20
37
80 117
Welded
Welded
50 10.90
8.00
20
20
38
80 117
50 11.50
8.47
20
20
39
80 117
50 11.80
9.00
20
20
90 23.70
127
20 89
40
80 117
50 12.30
9.42
20
20
41
80 117
50 12.70
9.75
20
20
42
80 117
50 13.20
10.34
20
20
43
80 117
50 13.70
10.65
20
20
44
80 117
50 14.20
11.25
20
20
90
127
20 89
45
80 117
50 15.80
13.00
20
20
48
80 117
50 16.80
14.80
20
20
90
127
20 89
50
80 117
50 19.20
17.00
20
20
54
80 117
50 23.10
21.00
20
20
90 46.20
127
20 89
60
80 117
50 28.80
25.00
20
20
65
80 117
63 32.10
28.30
20
20
70
89 127
63 36.20
32.00
20
20
75
89 127
Bore d
Hub
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
3. Those marked * have slot on hub.
33
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
DID100
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
W
100
Transvers
e Pitch
Pin
d
Plate
T
DID100-2 100-2
19.05
19.05
4.0
DID
DID
DID
JIS
3.79
7.53
DID100-4 100-4
DID100-5 100-5
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
10
25
50
A
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1600 1800 2000 2200 2400 2500 2600 2700
B
11
12
13
0.90 2.05 3.83 7.14 13.3 19.2 24.9 30.4 35.8 29.9 24.4 20.5 17.5 15.2 13.3 11.8 10.6 8.64 7.24 6.18 5.36 4.70 4.42 4.17 1.09
0.99 2.25 4.20 7.85 14.6 21.1 27.3 33.4 39.4 34.0 27.9 23.3 19.9 17.3 15.2 13.4 12.0 9.85 8.25 7.04 6.11 5.36 5.04 4.75
1.08 2.46 4.58 8.55 16.0 23.0 29.8 36.4 42.9 38.4 31.4 26.3 22.5 19.5 17.1 15.2 13.6 11.1 9.30 7.94 6.89 6.04 5.68 5.36
14
15
16
1.17 2.66 4.97 9.27 17.3 24.9 32.3 39.5 46.5 42.9 35.1 29.4 25.1 21.8 19.1 16.9 15.2 12.4 10.4 8.88 7.69 6.75 6.35
1.26 2.87 5.35 9.98 18.6 26.8 34.8 42.5 50.1 47.6 38.9 32.6 27.9 24.1 21.2 18.8 16.8 13.8 11.5 9.85 8.53 7.49 7.04
1.35 3.07 5.74 10.7 20.0 28.8 37.3 45.6 53.7 52.4 42.9 35.9 30.7 26.6 23.3 20.7 18.5 15.2 12.7 10.9 9.40 8.25 7.76
17
18
19
1.44 3.28 6.12 11.4 21.3 30.7 39.8 48.7 57.3 57.4 47.0 39.4 33.6 29.1 25.6 22.7 20.3 16.6 13.9 11.9 10.3 9.04
1.53 3.49 6.51 12.2 22.7 32.7 42.3 51.8 61.0 62.5 51.2 42.9 36.6 31.7 27.9 24.7 22.1 18.1 15.2 12.9 11.2 9.85
1.62 3.70 6.91 12.9 24.1 34.6 44.9 54.9 64.6 67.8 55.5 46.5 39.7 34.4 30.2 26.8 24.0 19.6 16.4 14.0 12.2 10.7
20
21
22
1.71 3.91 7.30 13.6 25.4 36.6 47.4 58.0 68.3 73.2 60.0 50.2 42.9 37.2 32.6 28.9 25.9 21.2 17.8 15.2 13.1
1.81 4.12 7.70 14.4 26.8 38.6 50.0 61.1 72.0 78.8 64.5 54.0 46.1 40.0 35.1 31.1 27.9 22.8 19.1 16.3 14.1
1.90 4.34 8.09 15.1 28.2 40.6 52.6 64.3 75.7 84.5 69.1 57.9 49.5 42.9 37.6 33.4 29.9 24.4 20.5 17.5 15.2
23
24
25
1.99 4.55 8.49 15.8 29.6 42.6 55.2 67.4 79.5 90.3 73.9 61.9 52.9 45.8 40.2 35.7 31.9 26.1 21.9 18.7 16.2
2.09 4.76 8.89 16.6 31.0 44.6 57.8 70.6 83.2 95.6 78.8 66.0 56.4 48.9 42.9 38.0 34.0 27.9 23.3 19.9 17.3
2.18 4.98 9.29 17.3 32.4 46.6 60.4 73.8 87.0 100 83.7 70.2 59.9 51.9 45.6 40.4 36.2 29.6 24.8 21.2 18.3
28
30
32
2.47 5.63 10.5 19.6 36.6 52.7 68.2 83.4 98.3 113 99.3 83.2 71.0 61.6 54.0 47.9 42.9 35.1 29.4 25.1
2.66 6.06 11.3 21.1 39.4 56.7 73.5 89.9 106 122 110 92.3 78.8 68.3 59.9 53.1 47.6 38.9 32.6
2.85 6.50 12.1 22.6 42.2 60.8 78.8 96.3 114 130 121 102 86.8 75.2 66.0 58.5 52.4 42.9 35.9
35
40
45
3.14 7.16 13.4 24.9 46.5 67.0 86.8 106 125 144 139 116 99.3 86.0 75.5 67.0 59.9 49.4
3.63 8.27 15.4 28.8 53.7 77.4 100 123 144 166 169 142 121 105 92.3 81.8 73.2
4.12 9.39 17.5 32.7 61.0 87.9 114 139 164 188 202 169 145 125 110 97.6
Note: 1. Values in the table above are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Please consult with us when the ratings beyond the dotted line to rightward.
34
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Double sprocket
with hub on one side
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Double sprocket
with hub on one side
(Double BW type Welded)
Unit (mm)
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
Hub
DP
DO
10
102.74
116
20
43
65
50
1.86
20
1.68
10
11
12
13
14
15
112.70
122.67
132.67
142.68
152.71
127
137
147
157
167
20
20
20
20
20
50
57
59
59
70
75
86
88
88
98
50
50
50
50
50
2.30
2.90
3.10
3.60
4.20
20
20
20
20
20
3.00
3.86
3.40
5.60
6.00
11
12
13
14
15
16
17
18
19
20
162.74
172.79
182.84
192.90
202.96
178
188
198
209
219
20
20
20
20
20
66
75
75
75
75
98
107
107
107
107
50
50
50
50
50
4.60
5.30
5.70
6.10
6.50
20
20
20
20
20
6.50
7.60
7.90
8.30
8.60
16
17
18
19
20
21
22
23
24
25
213.03
223.10
233.17
243.25
253.32
229
240
250
260
270
20
20
20
20
20
75
80
80
80
80
107
117
117
117
117
50
56
56
56
56
7.00
7.90
8.40
8.80
9.30
20
20
20
20
20
8.90
8.56
9.12
9.60
10.10
21
22
23
24
25
26
27
28
29
30
263.40
273.49
283.57
293.66
303.75
281
291
301
311
321
20
20
20
20
20
80
80
80
80
80
117
117
117
117
117
56
56
56
56
56
9.80
10.40
10.90
11.60
12.10
20
20
20
20
20
10.70
11.50
11.90
12.60
13.20
26
27
28
29
30
31
32
33
34
35
313.83
323.92
334.01
344.11
354.20
331
341
352
362
372
20
20
20
20
20
80
80
80
80
89
117
117
117
127
127
56
56
56
63
63
12.80
13.40
14.10
14.80
16.60
20
15.98
20
20
16.90
17.88
36
37
38
39
40
364.29
374.38
384.47
394.57
404.67
382
392
402
412
422
20
20
20
20
20
89
89
89
89
90
127
127
127
127
127
63
63
63
63
63
17.20
17.90 SS400
19.40 Welded
19.90
20.40
20
20
20
16.90
18.80
20.08
20
21.98
41
42
43
44
45
414.77
424.86
434.96
445.06
455.16
433
443
453
463
473
20
20
20
20
20
90
90
90
90
90
127
127
127
127
127
63
63
63
63
63
21.50
22.70
23.50
24.10
24.70
20
20
22.50
23.68
20
26.48
41
42
43
44
45
48
50
54
60
65
485.45
505.65
546.05
606.66
657.17
503
524
564
625
675
20
20
20
20
20
90
90
103
103
103
127
127
147
147
147
63
63
80
80
80
27.50
28.50
37.40
44.30
54.88
20
20
20
20
20
29.48
31.68
36.48
44.28
50.48
48
50
54
60
65
70
75
707.68
758.20
726
777
20
20
103
103
147
147
100
100
64.96
72.98
20
58.48
70
75
S35C
28
28
28
28
58
65
72
66
86
95
105
98
80
80
80
80
5.00
6.00
7.10
7.10
28
28
28
28
28
66
75
75
89
89
98
107
107
127
127
80
80
80
90
90
7.70
8.90
9.60
12.70
13.50
28
89
127
90
14.30
20
95
137
90
17.80
20
95
137
90
S35C
24.30
SS400
20
95
137
90
30.90
SS400
Welded
20
20
20
103
103
103
147
147
147
90
100
125
40.70
49.30
89.00
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
35
31
32
33
34
35
36
37
38
39
40
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
DID120
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
120
DID120-2 120-2
DID120-3 120-3 38.10
25.40
Transvers
e Pitch
Pin
d
JIS
Plate
T
DID
DID
DID
3,100 5.49
5,270 11.0
22.23 11.11 140.6 143.9 145.0 24.9 28.9 45.4 4.80 36.2 31.2 411.3 41,940 441.3 45,000
7,750 16.5
DID120-4 120-4
666 68,000
DID120-5 120-5
833 85,000
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
10
25
A
50
100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
B
11
12
13
1.51 3.45 6.45 12.0 17.3 22.5 32.3 41.9 51.2 43.5 34.6 28.3 23.7 20.2 17.5 15.4 13.7 12.2 11.0 10.0 9.13 8.38 7.73 7.15 6.65
1.66 3.79 7.08 13.2 19.0 24.7 35.5 46.0 56.3 49.6 39.4 32.2 27.0 23.1 20.0 17.5 15.6 13.9 12.6 11.4 10.4 9.55 8.80 8.15
1.81 4.14 7.72 14.4 20.8 26.9 38.7 50.2 61.3 55.9 44.4 36.3 30.5 26.0 22.5 19.8 17.5 15.7 14.2 12.8 11.7 10.8 9.93 9.19
14
15
16
1.96 4.48 8.36 15.6 22.5 29.1 42.0 54.4 66.4 62.5 49.6 40.6 34.0 29.1 25.2 22.1 19.6 17.5 15.8 14.4 13.1 12.0 11.1 10.3
2.12 4.83 9.01 16.8 24.2 31.4 45.2 58.6 71.6 69.3 55.0 45.0 37.7 32.2 27.9 24.5 21.7 19.5 17.5 15.9 14.5 13.3 12.3
2.27 5.18 9.66 18.0 26.0 33.6 48.5 62.8 76.7 76.4 60.6 49.6 41.6 35.5 30.8 27.0 24.0 21.4 19.3 17.5 16.0 14.7 13.6
17
18
19
2.42 5.53 10.3 19.3 27.7 35.9 51.7 67.0 81.9 83.6 66.4 54.3 45.5 38.9 33.7 29.6 26.2 23.5 21.2 19.2 17.5 16.1 14.8
2.58 5.88 11.0 20.5 29.5 38.2 55.0 71.3 87.2 91.1 72.3 59.2 49.6 42.4 36.7 32.2 28.6 25.6 23.1 20.9 19.1 17.5 16.2
2.73 6.23 11.6 21.7 31.3 40.5 58.3 75.6 92.4 98.8 78.4 64.2 53.8 45.9 39.8 34.9 31.0 27.7 25.0 22.7 20.7 19.0
20
21
22
2.89 6.59 12.3 22.9 33.0 42.8 61.7 79.9 97.7 107 84.7 69.3 58.1 49.6 43.0 37.7 33.5 30.0 27.0 24.5 22.4 20.5
3.04 6.94 13.0 24.2 34.8 45.1 65.0 84.2 103 115 91.1 74.6 62.5 53.4 46.3 40.6 36.0 32.2 29.1 26.4 24.1 22.1
3.20 7.30 13.6 25.4 36.6 47.5 68.4 88.6 108 123 97.7 80.0 67.0 57.2 49.6 43.5 38.6 34.6 31.2 28.3 25.8 23.7
23
24
25
3.36 7.66 14.3 26.7 38.4 49.8 71.7 92.9 114 132 104 85.5 71.7 61.2 53.0 46.5 41.3 36.9 33.3 30.2 27.6
3.52 8.02 15.0 27.9 40.2 52.1 75.1 97.3 119 140 111 91.1 76.4 65.2 56.5 49.6 44.0 39.4 35.5 32.2 29.4
3.68 8.38 15.6 29.2 42.1 54.5 78.5 102 124 146 118 96.9 81.2 69.3 60.1 52.7 46.8 41.9 37.7 34.3 31.3
28
30
32
4.15 9.47 17.7 33.0 47.5 61.6 88.7 115 140 165 140 115 96.2 82.2 71.2 62.5 55.4 49.6 44.7 40.6
4.47 10.2 19.1 35.6 51.2 66.3 95.5 124 151 178 156 127 107 91.1 79.0 69.3 61.5 55.0 49.6
4.80 10.9 20.4 38.1 54.9 71.1 102 133 162 191 171 140 118 100 87.0 76.4 67.7 60.6
35
40
45
5.29 12.1 22.5 42.0 60.5 78.4 113 146 179 211 196 160 135 115 99.5 87.4 77.5
6.11 13.9 26.0 48.5 69.9 90.5 130 169 206 243 240 196 164 140 122
6.93 15.8 29.5 55.1 79.3 103 148 192 234 276 286 234 196 167
Note: 1. Values in the table above are for simplex chains only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Consult us when the ratings beyond the dotted line to rightward.
36
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type Welded)
Double sprocket
with hub on one side
(Double B type)
Standard
Roller Chain
Flat plain
(A type)
Double sprocket
with hub on one side
(Double BW type Welded)
Unit (mm)
Single sprocket with hub on one side (B type/ BW type) Double sprocket with hub on one side (B type/ BW type)
Number
Approx.
Approx.
Stock Approx.
Bore d
Hub
weight Material
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
Stock Max. (Dia.) DH (Length) L Kg
Kg
d
Bore d
Hub
DP
DO
10
123.29
140
25
50
78
56
3.20
26
50
80
100
25
1.80
10
11
12
13
14
15
135.24
147.21
159.20
171.22
183.25
152
165
177
190
202
25
25
25
25
25
60
65
70
70
80
91
98
98
107
117
56
56
56
56
63
4.00
4.80
5.30
6.30
7.80
26
28
28
28
33
60
71
80
75
80
90
103
115
120
120
100
100
100
100
100
9.20
11.10
11.40
13.20
25
25
25
25
25
2.27
2.60
3.20
3.67
4.22
11
12
13
14
15
16
17
18
19
20
195.29
207.35
219.41
231.48
243.55
214
227
239
251
263
25
25
25
25
25
80
80
80
80
89
117
117
117
117
127
63
63
63
63
63
8.40
9.10
9.90
10.70
12.10
33
33
33
33
33
80
80
89
89
89
140
140
150
150
150
100
100
100
100
100
14.40
15.70
18.00
19.40
21.00
25
25
25
25
25
5.00
5.60
6.25
7.00
7.86
16
17
18
19
20
21
22
23
24
25
255.63
267.72
279.80
291.90
303.99
276
288
300
312
324
25
30
30
30
30
89
89
89
89
89
127
127
127
127
127
63
63
63
63
63
13.00
13.40
14.30
15.20
16.20
33
89
150
100
22.60
30
110
157
100
31.00
25
30
30
30
30
8.90
9.80
10.50
11.50
12.56
21
22
23
24
25
26
27
28
30
32
316.09
328.19
340.29
364.50
388.71
337
349
361
385
410
30
30
30
30
30
89
89
95
95
95
127
127
137
137
137
63
63
71
71
71
17.20
18.30
21.84
23.20
25.70
30
15.50
30
30
30
14.00
16.50
19.00
21.50
26
27
28
30
32
35
36
38
40
42
425.04
437.15
461.38
485.60
509.84
446
458
483
507
531
30
30
30
30
30
95
95
95
103
103
137
137
137
147
147
71
71
71
80
80
30
30
30
30
30
26.00
27.50
31.00
34.00
38.00
35
36
38
40
42
45
48
50
54
60
546.19
582.54
606.78
655.26
727.99
568
604
628
677
750
30
30
30
30
30
103
103
103
103
118
147
147
147
147
167
30
30
43.00
49.00
30
30
60.00
71.50
45
48
50
54
60
65
70
75
788.60
849.22
909.84
811
871
932
30
30
30
118
118
118
167
167
167
S35C
30
110
157
100
43.90
29.70
30.70 SS400
34.70 Welded
38.20
42.00
30
110
157
100
56.80
30
125
177
140
81.30
80
80
100
100
100
47.60
53.00
62.87
71.72
75.00
30
125
177
140
98.50
30
125
177
160
131.60
100
112
112
81.00
82.30
90.40
S35C
SS400
Welded
SS400
65
70
75
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. The shaded area of the above table indicates heat treated teeth.
37
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
DID140
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
140
DID140-2 140-2
DID140-3 140-3 44.45
25.40
Transvers
e Pitch
Pin
d
JIS
Plate
T
DID
DID
DID
215
22,000 40.2
431
44,000 68.3
6,970 14.1
647
66,000 100
10,250 21.1
862
25.40 12.71 151.5 156.3 157.5 26.8 31.7 48.9 5.60 41.9 36.3
4,100 7.11
DID140-4 140-4
88,000 132
13,530 28.1
DID140-5 140-5
15,990 34.9
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
10
25
A
50
100 150 200 250 300 350 400 450 500 550 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1650
B
11
12
13
2.34 5.34 9.97 18.6 26.8 34.7 42.5 50.0 57.5 64.8 72.1 64.7 56.1 49.3 39.1 32.0 26.8 22.9 19.8 17.4 15.4 13.8 12.5 11.3 10.8
2.57 5.87 11.0 20.4 29.5 38.2 46.6 55.0 63.1 71.2 79.2 73.8 63.9 56.1 44.5 36.5 30.6 26.1 22.6 19.8 17.6 15.7 14.2 12.9 12.3
2.81 6.40 12.0 22.3 32.1 41.6 50.9 59.9 68.8 77.6 86.3 83.2 72.1 63.3 50.2 41.1 34.4 29.4 25.5 22.4 19.8 17.8 16.0 14.5
14
15
16
3.04 6.93 12.9 24.2 34.8 45.1 55.1 64.9 74.6 84.1 93.5 93.0 80.6 70.7 56.1 45.9 38.5 32.9 28.5 25.0 22.2 19.8 17.9 16.2
3.28 7.47 13.9 26.0 37.5 48.6 59.3 69.9 80.3 90.6 101 103 89.4 78.4 62.2 50.9 42.7 36.5 31.6 27.7 24.6 22.0 19.8 5.76
3.51 8.01 15.0 27.9 40.2 52.1 63.6 75.0 86.1 97.1 108 114 98.4 86.4 68.6 56.1 47.0 40.2 34.8 30.6 27.1 24.2 21.9
17
18
19
3.75 8.55 16.0 29.8 42.9 55.6 67.9 80.1 92.0 104 115 124 108 94.6 75.1 61.5 51.5 44.0 38.1 33.5 29.7 26.6 23.9
3.99 9.10 17.0 31.7 45.6 59.1 72.3 85.2 97.8 110 123 135 117 103 81.8 67.0 56.1 47.9 41.5 36.5 32.3 28.9 26.1
4.23 9.64 18.0 33.6 48.4 62.7 76.6 90.3 104 117 130 143 127 112 88.7 72.6 60.9 52.0 45.0 40.0 35.1 31.4 28.3
20
21
22
4.47 10.2 19.0 35.5 51.1 66.2 81.0 95.4 110 124 137 151 138 121 95.8 78.4 65.7 56.0 48.6 43.0 37.9 33.9 5.69
4.71 10.7 20.1 37.4 53.9 69.8 85.4 101 116 130 145 159 148 130 103 84.4 70.7 60.4 52.3 45.9 40.7 36.5
4.95 11.3 21.1 39.3 56.7 73.4 89.8 106 121 137 152 167 159 139 111 90.5 75.8 64.7 56.1 49.3 43.7 39.1
23
24
25
5.20 11.9 22.1 41.3 59.5 77.0 94.2 111 127 144 160 176 170 149 118 96.7 81.1 69.2 60.0 52.7 46.7 41.8
5.44 12.4 23.2 43.2 62.3 80.7 98.6 116 133 151 167 184 181 159 126 103 86.4 73.8 63.9 56.1 49.8 44.2
5.69 13.0 24.2 45.2 65.1 84.3 103 121 139 157 175 192 192 169 134 110 91.9 78.4 68.0 59.7 52.9 15.5
28
30
32
6.43 14.7 27.4 51.1 73.5 95.3 116 137 158 178 198 217 228 200 159 130 109 93.0 80.6 70.7
6.92 15.8 29.5 55.0 79.2 103 125 148 170 192 213 234 253 222 176 144 121 103 89.4
7.42 16.9 31.6 59.0 85.0 110 135 159 182 205 228 251 273 244 194 159 133 114 98.0
35
40
45
8.18 18.7 34.8 65.0 93.6 121 148 175 201 226 252 277 301 280 222 182 152 130
9.45 21.6 40.2 75.0 108 140 171 202 232 261 291 319 348 342 271 222
10.73 24.5 45.7 85.2 123 159 194 229 263 297 330 363 395 408 323
Note: 1. Values in the table above are for simplex chains only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Consult us when the ratings beyond the dotted line to rightward.
38
Standard
Roller Chain
Single sprocket
Single sprocket
with hub on one side
with hub on one side
(Single B type)
(Single BW type welded)
Flat plain
(A type)
Double sprocket
with hub on one side
(Double B type)
Unit (mm)
Number Pitch
dia.
of teeth
Tip
dia.
Single sprocket with hub on one side (B type/ BW type) Flat plain (A type)
Number
Approx.
Stock Approx.
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
d Kg
Bore
163
178
193
207
221
25
25
25
25
25
60
73
80
80
89
91
106
117
117
127
56
56
56
63
63
4.40
5.50
6.60 S35C
7.90
9.30
25
25
25
25
25
2.90
3.40
4.00
4.70
5.50
10
11
12
13
14
213.79
227.84
241.91
255.98
270.06
236
250
264
279
293
25
25
25
25
25
89
89
89
89
95
127
127
127
127
137
63
63
63
63
71
25
25
25
25
25
6.30
7.20
8.10
9.10
10.30
15
16
17
18
19
20
21
22
23
24
284.15
298.24
312.34
326.44
340.54
307
322
336
350
364
25
30
30
30
30
95
95
95
95
95
137
137
137
137
137
71
71
71
71
71
10.10
11.19
12.14 S35C
13.00 SS400
15.60 Welded
16.70
17.90
18.40
18.90
20.90
25
25
30
30
30
11.40
12.60
13.80
SS400
15.10
16.40
25
26
30
32
35
38
40
42
45
48
354.65
368.77
425.24
453.49
495.88
538.27
566.54
594.81
637.22
679.63
379
393
450
478
521
563
591
620
662
705
30
30
30
30
30
30
30
30
30
30
103
103
103
110
110
110
110
110
118
118
147
147
147
157
157
157
157
157
167
167
80
80
80
90
90
90
90
90
100
100
24.10
25.50
31.50
34.00 SS400
40.10 Welded
51.00
53.10
60.00
67.60
74.30
30
30
30
30
30
30
30
30
30
30
60
849.32
875
38
118
167
112 111.20
30
DP
DO
10
11
12
13
14
143.84
157.78
171.74
185.74
199.76
15
16
17
18
19
Unit (mm)
Double sprocket with hub on one side (B type), Both Sides (C type)
Hub
Type
Number
of teeth
Pitch
dia.
DP
13
185.74 207
40
80 130 100
14.6
14
199.76 221
40
80 140 100
17.0
15
213.79 236
45
90 155 110
19.9
16
227.84 250
45
95 170 120
23.3
17
241.91 264
26.6
18
255.98 279
30.6
19
270.06 293
34.1
20
284.15 307
37.8
20
21
22
23
24
21
298.24 322
42.1
22
312.34 336
72.0
24
340.54 364
82.7
26
368.77 393
17.80
19.20
25.50
29.00
34.60
41.00
45.40
50.00
57.30
65.20
25
26
30
32
35
38
40
42
45
48
30
425.24 450
32
453.49 478
65
35
495.88 521
74.5 Carbon
76.5 steel
or
80.9 cast
87.5 steel
38
538.27 563
40
566.54 591
98.9
45
637.22 662
112.0
50
707.91 733
141.0
120.00
60
55
778.61 804
60
849.32 875
65
920.03 946
70
990.75 1,016
75
1,061.47 1,087
80
1,132.20 1,158
261.0
90
1,273.66 1,300
314.0
Note: 1. Determine the required bore size less than the Max. value shown above taking
strength reduction into consideration.
2. DID's finishing process is the basic application to the bore surface finishing for
doubled sprockets of B type and C type.
3. For double C type sprockets, three or four types of bore size are available in 26
and larger number of teeth than that. The bigger standard bore is applied in
case the required bore size ranges between the two types of bore size.
4. Heat treatment on teeth portion is available when requested.
39
85 140 100
65
85 140 100
93.8
158.0
176.0
196.0
217.0
239.0
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
DID160
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
160
DID160-2 160-2
DID160-3 160-3 50.80
31.75
Transvers
e Pitch
Pin
d
JIS
Plate
T
DID
DID
DID
269
27,500 52.9
539
55,000 90.9
9,180 19.4
809
82,500 132
13,500 29.0
28.58 14.29 180.8 185.4 186.9 31.9 36.5 58.5 6.40 47.8 41.4
5,400 9.82
DID160-4 160-4
17,820 38.6
DID160-5 160-5
21,060 48.2
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
10
25
A
50
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400
B
11
12
13
3.40 7.75 14.5 27.0 38.9 50.4 61.6 72.6 83.4 94.0 84.4 72.0 62.4 54.8 48.6 43.5 39.2 35.6 32.5 29.8 25.5 22.1 19.4 17.2
3.73 8.52 15.9 29.7 42.7 55.4 67.7 79.7 91.6 103 96.1 82.1 71.2 62.4 55.4 49.6 44.7 40.6 37.0 34.0 29.0 25.2 22.1 19.6
4.07 9.29 17.3 32.3 46.6 60.4 73.8 86.9 99.9 113 108 92.6 80.2 70.4 62.4 55.9 50.4 45.7 41.8 38.3 32.7 28.4 24.9 22.1
14
15
16
4.41 10.1 18.8 35.0 50.5 65.4 79.9 94.2 108 122 121 103 89.7 78.7 69.8 62.4 56.3 51.1 46.7 42.8 36.6 31.7 27.8 24.7
4.75 11.6 20.2 37.7 54.4 70.4 86.1 101 117 131 134 115 99.4 87.3 77.4 69.3 62.4 56.7 51.8 47.5 40.6 35.2 30.9 14.7
5.09 11.6 21.7 40.5 58.3 75.5 92.3 109 125 141 148 126 110 96.1 85.3 76.3 68.8 62.4 57.0 52.3 44.7 38.7 34.0
17
18
19
5.44 12.4 23.2 43.2 62.2 80.6 98.6 116 133 150 162 138 120 105 93.4 83.6 75.3 68.4 62.4 57.3 48.9 42.4 37.2
5.79 13.2 24.6 46.0 66.2 85.8 105 124 142 160 177 151 131 115 102 91.0 82.1 74.5 68.0 62.4 53.3 46.2 40.6
6.13 14.0 26.1 48.7 70.2 90.9 111 131 150 170 189 164 142 124 110 98.7 89.0 80.8 73.8 67.7 57.8 50.1 44.0
20
21
22
6.48 14.8 27.6 51.5 74.2 96.1 117 138 159 179 199 177 153 134 119 107 96.1 87.3 79.7 73.1 62.4 54.1 47.5
6.83 15.6 29.1 54.3 78.2 101 124 146 168 189 210 190 165 145 128 115 103 93.9 85.7 78.7 67.2 58.2 25.9
7.19 16.4 30.6 57.1 82.2 107 130 153 176 199 221 204 177 155 137 123 111 101 91.9 84.4 72.0 62.4
23
24
25
7.54 17.2 32.1 59.9 86.3 112 137 161 185 209 232 218 189 166 147 131 119 108 98.3 90.2 77.0 66.8
7.89 18.0 33.6 62.7 90.3 117 143 169 194 218 243 232 201 177 157 140 126 115 105 96.1 82.1 71.2
8.25 18.8 35.1 65.5 94.4 122 149 176 202 228 254 247 214 188 167 149 134 122 111 102 87.3 75.6
28
30
32
9.32 21.3 39.7 74.1 107 138 169 199 229 258 287 293 254 223 197 177 159 145 132 121
10.1 22.9 42.8 79.8 115 149 182 215 246 278 309 324 281 247 219 196 177 160 146 134
10.8 24.6 45.9 85.6 123 160 195 230 264 298 331 357 310 272 241 216 195 177 161
35
40
45
11.9 27.1 50.5 94.2 136 176 215 253 291 328 365 401 534 311 276 247 223
13.7 31.3 58.3 109 157 203 248 293 336 379 421 463 433 380 337
15.6 35.5 66.3 124 178 231 282 332 382 431 479 526 517 453
Note: 1. Values in the table above are for simplex chains only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Consult us when the ratings beyond the dotted line to rightward.
40
Standard
Roller Chain
Single sprocket
Single sprocket
with hub on one side
with hub on one side
(Single B type)
(Single BW type welded)
Flat plain
(A type)
Double sprocket
with hub on one side
(Double B type)
Unit (mm)
Number Pitch
dia.
of teeth
DP
Tip
dia.
DO
Single sprocket with hub on one side (B type/ BW type) Flat plain (A type)
Number
Approx.
Stock Approx.
weight Material
weight Material of teeth
Stock Max. (Dia.) DH (Length) L Kg
d Kg
Bore
Hub
10
11
12
13
14
164.39
180.31
196.28
212.27
228.30
186
204
220
237
253
25
25
25
25
25
70
80
89
95
95
105
117
127
137
137
63
63
63
71
71
6.80
8.30 S35C
9.90
12.50
13.80
25
25
25
25
25
4.80
5.79
6.86
8.03
9.28
10
11
12
13
14
15
16
17
18
19
244.33
260.39
276.46
292.55
308.64
269
286
302
319
335
30
30
30
30
30
95
103
103
103
103
137
147
147
147
147
71
71
71
71
71
15.20
17.40
18.97
20.62
22.38
30
30
30
30
30
10.63
12.08
13.61
15.23
16.95
15
16
17
18
19
20
21
22
24
25
324.74
340.84
356.96
389.19
405.32
351
368
384
416
433
30
30
35
35
35
103
103
118
118
118
147
147
167
167
167
71
71
80
80
80
24.20
26.10
30.20
34.40
36.60
30
30
35
35
35
18.75
20.65 SS400
22.64
26.90
29.16
26
30
32
35
40
421.45
485.99
518.28
566.71
647.47
449
514
546
595
676
35
35
35
35
35
118
118
118
118
118
167
167
167
167
167
80
100
100
100
112
38.40
52.30 SS400
62.00
66.90
85.80
35
35
35
35
35
45
48
60
728.25 757
776.72 806
970.65 1,000
35
35
35
132
132
132
187
187
187
125 92.40
125
125 135.40
35
35
35
S35C
SS400
Unit (mm)
Double sprocket with hub on one side (B type), Both Sides (C type)
Type
Number
of teeth
Pitch
dia.
DP
13
212.27 237
45
90 155 120
23.9
14
228.30 253
45
90 165 120
27.7
15
244.33 269
32.3
16
260.39 286
41.5
17
276.46 302
49.3
18
292.55 319
59.2
19
308.64 335
69.8
20
324.74 351
84.2
20
21
22
24
25
21
340.84 368
89.8
22
356.95 384
95.7
24
389.19 416
26
421.45 449
31.52
41.86
47.95
57.24
74.57
26
30
32
35
40
30
94.71
107.61
168.14
45
48
60
Note: 1. Determine the required bore size less than the Max. value shown above taking
strength reduction into consideration.
2. DID's finishing process is the basic application to the bore surface finishing for
doubled sprockets of B type and C type.
3. For double C type sprockets, three or four types of bore size are available in 26
and larger number of teeth than that. The bigger standard bore is applied in
case the required bore size ranges between the two types of bore size.
4. Heat treatment on teeth portion is available when requested.
5. Due to production reasons, S35C may be used for those with 13 ~ 21 teeth
without notice.
41
38
141.0 Carbon
485.99 514
121.0 steel
85 110 180 130
or
518.28 546
128.0 cast
110 145 225 170
566.71 595
138.0 steel
145 175 270 200
615.17 644
150.0
40
647.47 676
157.0
45
728.25 757
214.0
50
809.04 838
238.0
55
889.84 919
60
970.65 1,000
65
1,051.47 1,081
70
1,132.29 1,162
75
1,213.11 1,243
80
1,293.94 1,323
420.0
90
1,455.61 1,485
502.0
32
35
264.0
293.0
322.0
352.0
386.0
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
DID180
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
W
180
DID180-2 180-2
DID180-3 180-3 57.15
35.72
Transvers
e Pitch
Pin
d
JIS
Plate
T
DID
DID
DID
362
37,000 61.7
6,300 12.7
725
35.71 17.46 203.3 209.1 211.1 35.8 41.6 65.8 7.10 53.8 46.6
74,000 105
10,710 25.0
15,750 37.3
DID180-4 180-4
20,790 49.6
DID180-5 180-5
24,570 61.9
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
10
25
A
50
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150
B
11
12
13
4.51 10.3 19.2 35.8 51.6 66.9 81.7 96.3 111 111 92.7 79.2 68.6 60.2 53.4 47.8 43.1 39.1 35.7 32.8 30.2 28.0 26.0 24.3
4.96 11.3 21.1 39.4 56.7 73.5 89.8 106 122 126 106 90.2 78.2 68.6 60.9 54.5 49.1 44.6 40.7 37.4 34.4 31.9 29.6 27.6
5.40 12.3 23.0 42.9 61.8 80.1 97.9 115 133 142 119 102 88.2 77.4 68.6 61.4 55.4 50.3 45.9 42.1 38.8 36.0 33.4 15.0
14
15
16
5.85 13.4 24.9 46.5 67.0 86.8 106 125 144 159 133 114 98.5 86.5 76.7 68.6 61.9 56.2 51.3 47.1 43.4 40.2 37.4
6.31 14.4 26.8 50.1 72.2 93.5 114 135 155 174 148 126 109 95.9 85.0 76.1 68.6 62.3 56.9 52.2 48.1 44.6 41.4
6.76 15.4 28.8 53.7 77.4 100 123 144 166 187 163 139 120 106 93.7 83.8 75.6 68.6 62.7 57.5 53.0 49.1 38.3
17
18
19
7.22 16.5 30.7 57.3 82.6 107 131 154 177 200 178 152 132 116 103 91.8 82.8 75.2 68.6 63.0 58.1 53.8 9.67
7.68 17.5 32.7 61.0 87.9 114 139 164 188 212 194 166 144 126 112 100 90.2 81.8 74.8 68.6 63.3 58.6
8.14 18.6 34.7 64.7 93.1 121 147 174 200 225 210 180 156 137 121 108 97.8 88.8 81.1 74.4 68.6 63.5
20
21
22
8.60 19.6 36.6 68.3 98.4 128 156 184 211 238 227 194 168 148 131 117 106 95.9 87.6 80.4 74.1 38.4
9.07 20.7 38.6 72.0 104 134 164 194 222 251 245 209 181 159 141 126 114 103 94.2 86.5 79.7
9.54 21.8 40.6 75.8 109 141 173 204 234 264 262 224 194 170 151 135 122 111 101 92.7 85.5
23
24
25
10.0 22.8 42.6 79.5 114 148 181 214 245 277 280 239 207 182 161 144 130 118 108 99.1
10.5 23.9 44.6 83.2 120 155 190 224 257 290 299 255 221 194 172 154 139 126 115
11.0 25.0 46.6 87.0 125 162 198 234 269 303 318 271 235 206 183 164 148 134
28
30
32
12.4 28.2 52.7 98.3 142 183 224 264 304 342 377 321 279 245 217 194
13.3 30.4 56.8 106 153 198 242 285 327 369 410 357 309 271 241
14.3 32.6 60.8 114 164 212 259 305 351 395 440 393 340 299 265
35
40
45
15.8 35.9 67.0 125 180 233 285 336 386 436 484 449 389
18.2 41.5 77.4 144 208 270 330 388 446 503 559 549
20.7 47.1 87.9 164 236 306 374 441 507 571 635
Note: 1. Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120.).
2. Consult us when the ratings beyond the dotted line to rightward.
42
Standard
Roller Chain
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type welded)
Double sprocket
with hub on one side
(Double B type)
Unit (mm)
Unit (mm)
Single sprocket with hub on one side (B type), Both Sides (C type)
Double sprocket with hub on one side (B type), Both Sides (C type)
Type
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Bore d
Hub
Center
position Material
I
13
238.81
266
50
90 160 110
93.45
93.45
14
256.83
285
50
90 160 110
15
274.87
303
50
90 160 110
16
292.94
322
Type
S35C,
carbon
113.45 steel
93.45
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Bore
Hub
13
238.81
266
14
256.83
285
91.1
274.87
303
101.1
16
292.94
322
111.1
17
311.02
340
121.1
18
329.12
358
131.1
19
347.21
377
141.1
20
365.33
395
151.1
17
311.02
340
113.45
18
329.12
358
113.45
19
347.21
377
113.45
cast
steel
20
365.33
395
113.45
21
383.45
413
21
383.45
413
22
401.58
432
22
401.58
432
24
437.84
468
24
437.84
468
26
474.13
505
26
474.13
505
30
546.74
578
30
546.74
578
32
583.06
615
32
583.06
615
35
637.55
669
35
637.55
669
38
692.06
724
38
692.06
724
40
728.41
760
40
728.41
760
45
819.28
852
45
819.28
50
910.17
943
50
910.17
55 1,001.07 1,034
81.1
15
or
Carbon
steel
or
cast
steel
Center
position Material
Carbon
steel
or
cast
steel
60 1,091.98 1,125
60 1,091.98 1,125
65 1,182.90 1,216
65 1,182.90 1,216
70 1,273.83 1,307
70 1,273.83 1,307
75 1,364.75 1,398
75 1,364.75 1,398
80 1,455.69 1,489
80 1,455.69 1,489
90 1,637.56 1,671
90 1,637.56 1,671
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. Given dimensions of bore and DH and L of hub to those with 21 teeth and larger is reference. Please consult with us about them when ordering.
3. DID's finishing process is the basic application to the bore surface finishing for double sprockets of B Type and C type.
4. For double C type sprockets, three or four types of bore size are available in 26 and larger number of teeth than that. The bigger standard bore is
applied in case the required bore size ranges between the two types of bore size.
5. Heat treatment on teeth portion is available when requested.
43
Standard
Roller Chain
CJ
Dimensions
Chain No.
Pitch
DID
JIS
DID200
200
Unit (mm)
Roller
Link Roller
Width dia.
W
Transvers
e Pitch
Pin
d
Plate
T
DID200-2 200-2
38.10
JIS
DID
DID
DID
470
48,000 73.5
7,500 16.5
941
96,000 125
12,750 32.5
71.6 8.00 60.0 52.0 1,145.1 116,766 1,294 132,000 1,412 144,000 183
18,750 48.5
DID200-4 200-4
24,750 64.5
DID200-5 200-5
29,250 80.5
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
Lu
bri
ca
tio
10
n
15
20
A
30
40
50
60
80
100 150 200 250 300 350 400 450 550 600 650 700 750 800 850 900 950
B
11
12
13
5.86 8.45 10.9 15.8 20.4 25.0 29.4 38.1 46.6 67.1 86.9 106 125 144 120 101 74.7 65.5 58.1 52.0 46.9 42.6 38.9 35.7
6.44 9.28 12.0 17.3 22.4 27.4 32.3 41.9 51.2 73.7 95.5 117 138 158 137 115 85.1 74.7 66.2 59.2 53.4 48.5 44.3 40.6
7.02 10.1 13.1 18.9 24.5 29.9 35.2 45.6 55.8 80.4 104 127 150 172 155 130 95.9 84.2 74.7 66.8 60.2 54.7 49.9 45.8
14
15
16
7.61 11.0 14.2 20.5 26.5 32.4 38.2 49.4 60.4 87.1 113 138 162 187 173 145 107 94.1 83.4 74.7 67.3 61.1 55.8 30.2
8.20 11.8 15.3 22.0 28.5 34.9 41.1 53.3 65.1 93.8 122 149 175 201 192 161 119 104 92.5 82.8 74.7 67.8 61.9 1.58
8.79 12.7 16.4 23.6 30.6 37.4 44.1 57.1 69.8 101 130 159 188 216 211 177 131 115 102 91.2 82.2 74.7 68.2
17
18
19
9.38 13.5 17.5 25.2 32.7 39.9 47.1 61.0 74.5 107 139 170 200 230 231 194 143 126 112 99.9 90.1 81.8 74.7
9.98 14.4 18.6 26.8 34.8 42.5 50.1 64.9 79.3 114 148 181 213 245 252 211 156 137 122 109 98.1 89.1 53.1
10.6 15.2 19.8 28.4 36.9 45.0 53.1 68.8 84.1 121 157 192 226 260 273 229 169 149 132 118 106 96.6
20
21
22
11.2 16.1 20.9 30.1 38.9 47.6 56.1 72.7 88.8 128 166 203 239 274 293 247 183 161 142 127 115
11.8 17.0 22.0 31.7 41.1 50.2 59.1 76.6 93.6 135 175 214 252 289 317 266 197 173 153 137
12.4 17.9 23.1 33.3 43.2 52.8 62.2 80.6 98.5 142 184 225 265 304 340 285 211 185 164 147
23
24
25
13.0 18.7 24.3 35.0 45.3 55.4 65.2 84.5 103 149 193 236 278 319 360 305 226 198 176
13.6 19.6 25.4 36.6 47.4 58.0 68.3 88.5 108 156 202 247 291 334 377 325 241 211 187
14.2 20.5 26.6 38.3 49.6 60.6 71.4 92.5 113 163 211 258 304 349 394 346 256 224
Note: 1. Value in the above table is for simplex chain only. For multiplex chains, please apply the coefficient of Multi-strand. (Please refer to Chain selection on
P.120).
2. Consult us when the ratings beyond the dotted line to rightward.
44
Standard
Roller Chain
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type welded)
Double sprocket
with hub on one side
(Double B type)
Unit (mm)
Unit (mm)
Single sprocket with hub on one side (B type), Both Sides (C type)
Double sprocket with hub on one side (B type), Both Sides (C type)
Type
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Center Approx.
position weight Material
Min. Max. (Dia.) DH (Length) L I Kg
Bore d
Hub
Type
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Center Approx.
position weight Material
Min. Max. (Dia.) DH (Length) L I Kg
Bore
Hub
13
265.34
296
13
265.34
296
87.15 43.0
14
285.37
316
14
285.37
316
97.15 52.6
15
305.42
337
15
305.42
337
16
325.49
357
16
325.49
357
17
345.58
378
17
345.58
378
18
365.68
398
18
365.68
398
19
385.79
419
19
385.79
419
20
405.92
439
20
405.92
439
21
426.05
459
63.4
21
426.05
459
22
446.20
480
66.8
22
446.20
480
171
24
486.49
520
73.9
24
486.49
520
181
26
526.81
561
26
526.81
561
201
30
607.49
642
30
607.49
642
224
32
647.85
683
35
708.39
744
38
768.96
40
809.34
45
910.31
32
647.85
683
237
89.3 Carbon
steel
105
or
113
cast
steel
113
35
708.39
744
256
804
141
38
768.96
804
284
845
162
40
809.34
845
296
45
910.31
946
180
336
50 1,011.30 1,047
200
380
55 1,112.30 1,149
221
422
60 1,213.31 1,250
251
60 1,213.31 1,250
473
65 1,314.34 1,351
271
65 1,314.34 1,351
528
70 1,415.36 1,452
296
70 1,415.36 1,452
582
75 1,516.39 1,553
350
75 1,516.39 1,553
643
80 1,617.43 1,654
377
80 1,617.43 1,654
704
90 1,819.51 1,856
418
90 1,819.51 1,856
839
Carbon
steel
or
cast
steel
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. DID's finishing process is the basic application to the bore surface finishing for double sprockets of B type and C type.
3. For double C type sprockets, three or four types of bore size are available in 26 and larger number of teeth than that. The bigger standard bore is
applied in case the required bore size ranges between the two types of bore size.
45
Standard
Roller Chain
CJ
Dimensions
Chain No.
DID
Pitch
JIS
Unit (mm)
Roller
Link Roller
Width dia.
Pin
d
240
DID240
Transvers
e Pitch
Plate
T
DID240-2 240-2
47.63
DID
DID
DID
JIS
686
17,170 46.0
47.63 23.81 270.9 278.6 281.1 47.7 55.3 87.8 9.50 71.5 62.0 1,651.2 168,375 1,868 190,500 2,050 210,000 247
25,250 68.7
DID240-4 240-4
33,330 91.3
DID240-5 240-5
39,390 114
Note: The values of average tensile strength and Max. allowable tension are for chains.
pe
No. of
Teeth of
Small
Sprocket
of
Unit (kW)
Small Sprocket revolutions per minute (rpm) (See P132 for the details of type of lubrication A, B and C.)
Lu
bri
ca
tio
5
n
10
15
A
20
25
30
40
50
60
80
100 125 150 175 200 250 300 350 400 450 500 550 600 650
B
11
12
13
5.06 9.44 13.6 17.6 21.5 25.4 32.9 40.2 47.4 61.4 75.0 91.7 108 124 140 171 202 170 139 117 99.6 86.4 75.8 67.2
5.56 10.4 14.9 19.4 23.7 27.9 36.1 44.2 52.0 67.4 82.4 101 119 136 154 188 222 194 159 133 114 98.4 86.4 44.4
6.06 11.3 16.3 21.1 25.8 30.4 39.4 48.2 56.7 73.5 89.9 110 129 149 168 205 242 219 179 150 128 111 97.4 15.7
14
15
16
6.57 12.3 17.7 22.9 28.0 32.9 42.7 52.2 61.5 79.6 97.3 119 140 161 182 222 262 244 200 168 143 124 109
7.07 13.2 19.0 24.6 30.1 35.5 46.0 56.2 66.2 85.8 105 128 151 174 196 239 282 271 222 186 159 138 121
7.59 14.2 20.4 26.4 32.3 38.1 49.3 60.3 71.0 92.0 112 138 162 186 210 256 302 298 244 205 175 152 130
17
18
19
8.10 15.1 21.8 28.2 34.5 40.6 52.6 64.3 75.8 98.2 120 147 173 199 224 274 323 327 268 224 191 166 101
8.61 16.1 23.2 30.0 36.7 43.2 56.0 68.4 80.6 105 128 156 184 211 238 291 343 356 292 244 209 181 72.6
9.13 17.0 24.6 31.8 38.9 45.8 59.3 72.5 85.5 111 135 165 195 224 253 309 364 386 316 265 226 196 44.0
20
21
22
9.65 18.0 26.0 33.6 41.1 48.4 62.7 76.7 90.4 117 143 175 206 237 267 326 385 417 341 286 244 212 15.3
10.2 19.0 27.4 35.4 43.3 51.0 66.0 80.8 95.2 123 151 184 217 250 281 344 405 449 367 308 263 204
10.7 20.0 28.8 37.3 45.5 53.7 69.5 85.0 100 130 159 194 228 262 296 362 426 481 394 330 282 176
23
24
25
11.2 21.0 30.2 39.1 47.8 56.3 72.9 89.2 105 136 165 203 240 275 311 380 447 514 421 353 301 147
11.8 21.9 31.6 40.9 50.0 59.0 76.4 93.4 110 143 174 213 251 288 325 397 468 538 449 376 321
12.3 22.9 33.0 42.8 52.3 61.6 79.8 97.6 115 149 182 223 262 301 340 415 489 562 477 400 328
Note: 1. Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on
P120).
2. Consult us when the ratings beyond the dotted line to rightward.
46
Standard
Roller Chain
Single sprocket
with hub on one side
(Single B type)
Single sprocket
with hub on one side
(Single BW type welded)
Double sprocket
with hub on one side
(Double B type)
Unit (mm)
Unit (mm)
Single sprocket with hub on one side (B type), Both Sides (C type)
Double sprocket with hub on one side (B type), Both Sides (C type)
Type
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Center Approx.
position weight Material
Min. Max. (Dia.) DH (Length) L I Kg
Bore d
Hub
Type
Number
of teeth
Pitch
dia.
Tip
dia.
DP
DO
Center Approx.
position weight Material
Min. Max. (Dia.) DH (Length) L I Kg
Bore
Hub
13
318.41
355
13
318.41
355
14
342.44
380
14
342.44
380
15
366.50
404
15
366.50
404
113
16
390.59
429
16
390.59
429
135
17
414.70
453
17
414.70
453
159
18
438.82
478
18
438.82
478
185
19
462.95
502
19
462.95
502
201
20
487.11
527
20
487.11
527
220
21
511.26
551
121
21
511.26
551
238
22
535.43
576
128
22
535.43
576
260
24
583.79
625
126
24
583.79
625
255
26
632.17
673
26
632.17
673
30
728.99
771
30
728.99
771
32
777.42
819
32
777.42
819
35
850.07
892
140 Carbon
155 steel
or
164
cast
202 steel
35
850.07
892
265 Carbon
322 steel
or
352 cast
390 steel
38
922.75
965
253
38
922.75
965
432
40
971.21 1,014
271
40
971.21 1,014
45 1,092.37 1,135
307
50 1,213.56 1,257
348
50 1,213.56 1,257
55 1,334.76 1,378
45 1,092.37 1,135
462
534
624
391
55 1,334.76 1,378
468
60 1,455.98 1,500
509
65 1,577.20 1,621
911
558
70 1,698.44 1,742
1,030
636
75 1,819.67 1,864
1,130
696
80 1,940.91 1,985
1,260
781
90 2,183.41 2,228
1,550
715
806
Note: 1. Determine the required bore size less than the Max. value shown above taking strength reduction into consideration.
2. DID's finishing process is the basic application to the bore surface finishing for double sprockets of B type and C type.
3. For double C type sprockets, three or four types of bore size are available in 26 and larger number of teeth than that. The bigger standard bore is
applied in case the required bore size ranges between the two types of bore size.
47
HK Roller Chain
qThickness of inner and outer plates are the same as the linkplates of the next size larger standard chain
wAllows the selection of a chain one size smaller than would be
necessary
Name
Features
Main uses Functions
High-strength
Roller Chain Series
Allowable
Load
Tensile
strength index
130
110
CONSTRUCTION
AGRICULTURE
Temperature
Range in Use
Temperature
Range in Use
10
80
Allowable
Load
Tensile
strength index
115
120
10
80
OUTDOOR
PETROLIUM
CONSTRUCTION
FORESTRY
MACHINE
AGRICULTURE
HI-PWR-S
HK
HI-PWR-SHK
DID 50
DID 60
DID 80
DID 100
DID 120
DID 140
HI-PWR-S
HI-PWR-S
HI-PWR-S
HI-PWR-S
HK
HK
HK
HK
HK
HK
HI-PWR-SHK
HI-PWR-SHK
HI-PWR-SHK
HI-PWR-SHK
DID
DID
DID
DID
HI-PWR-S
HI-PWR-S
HI-PWR-S
HI-PWR-S
HK
HK
HK
HK
HI-PWR-SHK
HI-PWR-SHK
HI-PWR-SHK
HI-PWR-SHK
160
180
200
240
48
Name
High-strength
Roller Chain Series
Tensile
strength index
150
125
CONSTRUCTION
EXCAVATION
Temperature
Range in Use
10
80
MINING
Allowable
Load
qBoth thicker link plates and oval figured link plates are provided
wThus it makes it possible to have maximum tensile strength and
allowable load
Features
130
DID
HI-PWR-SHK
120
DID
HK
110
DID
HI-PWR-S
100
DID
STANDARD
90
80
ANSI
JIS
50
60
Main uses
Functions
Symbols
Allowable
Load
Allowable load index
130
Tensile
strength index Tensile strength index
110
Temperature
Range in Use Allowable ambient
10 temperature
80
CONSTRUCTION
OUTDOOR
PETROLIUM
FORESTRY
MACHINE
AGRICULTURE
Drive of agricultural
machines
EXCAVATION
Drive of excavation
machines
MINING
49
High-strength
Roller Chain Series
Recommended uses
Compared to standard roller chains, HI-PWR-S roller
chains are higher in maximum kilowatt rating by about
30 percent in a medium to low speed range. They
exhibit excellent capability in places where large
shock loads are applied, drive units for frequent start/
stop, and also in high speed applications.
<Examples>
Civil engineering machines such as skid steer,
trenchers, trucks, cranes, agitating trucks, forklifts
and drive units for conveyors, elevators, stackers, etc.
50
Tensile
strength index
130
110
Temperature
Range in Use
10
80
AGRICULTURE
CONSTRUCTION
OUTDOOR
Selection of chains
In general, select your chain with reference to "Designing of Chain Transmission" (P120~126) and also to the tables of
"Drive Performance" and "Dimensions" of HI-PWR-S type roller chains (P52~59)
However, only for a special case of low speed and less shock, "Low-speed selection" (P121) is also applicable.
Sprockets
Allowable
Load
HJ
Dimensions
Unit (mm)
Transverse
pitch
DID
DID
DID
7.94 32.6
35.4 16.4
19.0
29.3
3.2
24.1
Approx.
Avg. tensile strength Max. allowable load Max. allowable load Weight
h
kN
kN
kN
kgf
kgf
kgf kg/m
20.8 075.51 7,700
84
8,600 18.6 1,900 02.82
19.05
9.54 39.5
42.5 19.8
22.7
35.8
4.0
30.1
127
13,000
30.4
3,100 04.18
22.23
11.11 49.7
53.0 24.9
28.2
45.4
4.8
36.2
186
19,000
40.2
4,100 06.12
25.40
25.40
12.71 53.6
58.4 26.8
31.7
48.9
5.6
42.2
245
25,000
53.9
5,500 07.71
50.80
31.75
28.58
14.29 63.6
68.2 31.9
36.5
58.5
6.4
48.2
313
32,000
70.6
7,200 10.50
180
57.15
35.72
35.71
17.46 71.5
77.3 35.8
41.6
65.8
7.1
54.2
412
42,000
83.3
8,500 14.40
200
200
63.50
38.10
39.68
19.85 77.9
85.0 39.0
46.0
71.6
8.0
60.2
500
51,000
240
240
76.20
47.63
47.63
55.3
87.8
9.5
72.2
725
Chain No.
ANSI*
DID
DID HI-PWR-S
80
080
25.40
15.88
15.88
DID HI-PWR-S
100
100
31.75
19.05
DID HI-PWR-S
120
120
38.10
25.40
DID HI-PWR-S
140
140
44.45
DID HI-PWR-S
160
160
DID HI-PWR-S
180
DID HI-PWR-S
DID HI-PWR-S
Pin
d
Plate
Note: 1. The values of average tensile strength and maximum allowable load are for chains.
2. Ask us for the delivery time.
3. *Equivalent to ANSI
51
High-strength
Roller Chain Series
HI-PWR-S Roller chains and ANSI standard chains are the same in basic dimensions. Use ANSI standard sprockets.
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
DID HI-PWR-S 80
80
80-2
80-3
Unit (mm)
Roller
Pitch link
width
Transverse
Pitch
Pin
Roller
dia.
25.40
15.88
15.88
7.94
32.6
35.4
61.9
64.7 16.4
91.3
94.0
Plate
19.0
29.3
3.2
24.1
20.8
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
075.51
kgf
DID
kgf
7,700
84
8,600 18.6
1,900
2.82
151.00 15,400
168
17,200 31.6
3,230
5.61
226.50 23,100
253
25,800 46.5
4,750
8.24
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
25
11
12
13
1.47
1.62
1.76
2.75
3.02
3.29
5.13
5.63
6.14
9.57
10.5
11.5
13.8
15.1
16.5
17.9
19.6
21.4
21.8
24.0
26.2
29.6
32.5
35.4
24.0
27.3
30.8
14
15
16
1.91
2.06
2.21
3.57
3.84
4.12
6.66
7.17
7.69
12.4
13.4
14.4
17.9
19.3
20.7
23.2
25.0
26.8
28.3
30.5
32.7
38.4
41.3
44.3
34.4
38.2
42.1
17
18
19
2.36
2.51
2.66
4.40
4.68
4.96
8.21
8.73
9.26
15.3
16.3
17.3
22.1
23.5
24.9
28.6
30.4
32.2
34.9
37.2
39.4
47.3
50.3
53.3
46.1
50.2
54.5
20
21
22
2.81
2.96
3.11
5.24
5.53
5.81
9.78
10.3
10.8
18.3
19.2
20.2
26.3
27.7
29.1
34.1
35.9
37.8
41.6
43.9
46.2
56.3
59.4
62.5
58.8
63.3
67.8
50.2
54.0
57.9
23
24
25
3.27
3.42
3.57
6.10
6.38
6.67
11.4
11.9
12.5
21.2
22.2
23.2
30.6
32.0
33.5
39.6
41.5
43.4
48.4
50.7
53.0
65.6
68.6
71.7
72.5
77.3
82.2
61.9
66.0
70.2
28
30
32
4.04
4.35
4.67
7.54
8.12
8.71
14.1
15.2
16.3
26.3
28.3
30.3
37.8
40.7
43.7
49.0
52.8
56.6
59.9
64.5
69.2
81.1
87.3
93.6
97.4
108
117
83.2
92.2
102
35
40
5.14
5.94
9.59
11.1
17.9
20.7
33.4
38.6
48.1
55.6
62.3
72.0
76.2
88.0
103
119
129
149
116
142
50
100
200
300
400
500
700
900
1000
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
52
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
100
100-2
100-3
Unit (mm)
Roller
Pitch link
width
Transverse
Pitch
Pin
Roller
dia.
31.75
19.05
19.05
9.54
39.5
42.5
75.3
78.3 19.8
Plate
22.7
35.8
4.0
30.1
26.0
111.2 114.2
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kgf
kN
116.7
11,900
127
13,000 30.4
3,100
04.18
233.4
23,800
255
26,000 51.6
5,270
08.21
350.1
35,700
382
39,000 76.0
7,750
12.20
kgf
DID
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
1.05
1.15
1.26
2.40
2.63
2.87
4.47
4.91
5.35
8.34
9.16
9.99
15.6
17.1
18.7
22.4
24.6
26.9
29.1
31.9
34.8
35.5
39.0
42.5
41.8
46.0
50.1
41.8
47.6
53.7
14
15
16
1.36
1.47
1.57
3.11
3.35
3.59
5.80
6.25
6.70
10.8
11.7
12.5
20.2
21.8
23.3
29.1
31.3
33.6
37.7
40.6
43.5
46.1
49.6
53.2
54.3
58.5
62.7
60.0
66.6
72.1
54.5
60.0
17
18
19
1.68
1.79
1.90
3.83
4.08
4.32
7.15
7.61
8.07
13.4
14.2
15.1
24.9
26.5
28.1
35.9
38.2
40.5
46.5
49.5
52.4
56.8
60.4
64.1
67.0
71.2
75.5
76.9
81.8
86.7
65.7
71.6
77.7
20
21
22
2.00
2.11
2.22
4.57
4.82
5.06
8.53
8.99
9.45
15.9
16.8
17.6
29.7
31.3
32.9
42.8
45.1
47.4
55.4
58.4
61.4
67.7
71.4
75.1
79.8
84.1
88.5
91.7
96.6
102
83.9
90.2
96.8
23
24
25
2.33
2.44
2.55
5.31
5.56
5.81
9.92
10.4
10.9
18.5
19.4
20.3
34.5
36.2
37.8
49.7
52.1
54.4
64.4
67.5
70.5
78.8
82.5
86.2
92.8
97.2
102
107
112
117
103
110
117
28
30
32
2.88
3.10
3.33
6.57
7.08
7.59
12.3
13.2
14.2
22.9
24.7
26.4
42.7
46.0
49.3
61.5
66.3
71.1
79.7
85.9
92.0
97.4
105
113
115
124
133
132
142
152
139
154
170
142
35
40
3.67
4.23
8.36
9.66
15.6
18.0
29.1
33.6
54.3
62.8
78.3
90.4
101
117
124
143
146
169
168
194
189
219
163
199
25
50
100
200
300
400
500
600
700
800
900
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
53
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
120
120-2
120-3
Unit (mm)
Roller
Pitch link
width
Transverse
Pitch
Pin
Roller
dia.
38.10
25.40
22.23
11.11
49.7
53.0
95.2
98.5 24.9
Plate
28.2
45.4
4.8
36.2
31.2
140.6 143.9
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
kgf
161.8 16,500
186
19,000
40.2
4,100
06.12
323.6 33,000
372
38,000
68.3
6,970
12.20
485.4 49,500
559
18.20
kgf
DID
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
1.88
2.06
2.25
4.29
4.71
5.14
8.00
8.79
9.58
14.9
16.4
17.9
21.5
23.6
25.8
27.9
30.6
33.4
40.1
44.1
48.1
52.0
57.1
62.3
63.6
69.8
76.1
60.9
69.4
78.3
14
15
16
2.44
2.63
2.82
5.56
5.99
6.43
10.4
11.2
12.0
19.4
20.0
22.4
27.9
30.1
32.2
36.2
39.0
41.8
52.1
56.1
60.2
67.5
72.7
77.9
82.5
88.8
95.3
87.5
97.1
107
17
18
19
3.01
3.20
3.39
6.86
7.30
7.74
12.8
13.6
14.4
23.9
25.4
26.9
34.4
36.6
38.8
44.6
47.4
50.3
64.2
68.3
72.4
83.2
88.5
93.8
102
108
115
117
127
135
92.9
101
110
20
21
22
3.58
3.78
3.97
8.18
8.62
9.06
15.3
16.1
16.9
28.5
30.0
31.6
41.0
43.2
45.5
53.1
56.0
58.9
76.5
80.7
84.8
99.2
105
110
121
128
134
143
151
158
119
128
137
23
24
25
4.17
4.37
4.56
9.51
9.96
10.4
17.8
18.6
19.4
33.1
34.7
36.2
47.7
49.9
52.2
61.8
64.7
67.6
89.0
93.2
97.4
115
121
126
141
148
154
166
174
182
146
156
166
28
30
32
5.16
5.55
5.96
11.8
12.7
13.6
22.0
23.6
25.4
41.0
44.1
47.3
59.0
63.6
68.1
76.4
82.3
88.3
110
119
127
143
154
165
174
188
201
205
221
237
196
218
240
35
40
6.56
7.58
15.0
17.3
27.9
32.3
52.1
60.2
75.1
86.7
97.3
112
140
162
181
210
222
256
261
302
274
235
25
50
100
150
200
300
400
500
600
700
800
274
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
54
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
140
140-2
140-3
Unit (mm)
Roller
Pitch link
width
Pin
Roller
dia.
44.45
25.40
25.40
Transverse
Pitch
53.6
58.4
31.7
48.9
5.6
42.2
36.3
Plate
151.5 156.3
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
kgf
215.7 22,000
245
25,000
53.9
5,500
07.71
431.4 44,000
490
50,000
91.7
9,350
15.30
647.1 66,000
735
22.90
kgf
DID
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
2.89
3.18
3.46
6.60
7.25
7.90
12.3
13.5
14.8
23.0
25.2
27.5
33.1
36.4
39.6
42.9
47.1
51.4
52.4
57.6
62.8
61.8
67.8
74.0
70.9
77.9
85.0
14
15
16
3.75
4.04
4.33
8.56
9.22
9.89
16.0
17.2
18.5
29.8
32.1
34.4
42.9
46.3
49.6
55.6
59.9
64.3
68.0
73.3
78.6
80.1
86.3
92.6
17
18
19
4.63
4.92
5.22
10.6
11.2
11.9
19.7
21.0
22.2
36.8
39.1
41.5
53.0
56.3
59.7
68.6
73.0
77.4
83.9
89.2
94.6
20
21
22
5.52
5.81
6.11
12.6
13.3
14.0
23.5
24.8
26.0
43.8
46.2
48.6
63.1
66.5
70.0
81.8
86.2
90.6
23
24
25
6.42
6.72
7.02
14.6
15.3
16.0
27.3
28.6
29.9
51.0
53.4
55.8
73.4
76.9
80.3
28
30
32
7.93
8.55
9.16
18.1
19.5
20.9
33.8
36.4
39.0
63.0
67.9
72.8
35
40
10.1
11.7
23.0
26.6
43.0
49.6
80.2
92.6
25
50
100
150
200
250
300
350
450
500
550
600
80.0
87.9
95.8
89.0
97.7
107
90.6
103
116
78.6
89.5
101
68.9
78.6
88.6
92.1
99.2
106
104
112
120
115
124
133
127
137
147
112
125
138
99.0
110
121
98.8
105
111
114
121
128
128
136
144
142
151
161
156
166
176
151
164
178
132
144
157
100
105
111
118
124
131
135
143
150
153
161
169
170
179
188
187
197
207
193
207
222
169
182
195
95.1
99.6
104
116
122
127
137
143
150
157
165
172
177
186
194
197
207
216
217
227
237
236
247
259
208
222
236
90.8
97.8
105
118
127
136
144
155
166
169
182
196
195
210
225
219
236
253
244
263
282
268
289
310
292
315
338
280
311
342
116
133
150
173
183
211
216
249
248
286
279
323
310
359
341
394
372
430
391
400
C
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
55
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
160
160-2
160-3
Unit (mm)
Roller
Pitch link
width
Pin
Roller
dia.
50.80
31.75
28.58
Transverse
Pitch
63.6
68.2
36.5
58.5
6.4
48.2
41.4
Plate
180.8 185.4
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
kgf
272.6 27,800
313
32,000
7,200
10.5
545.2 55,600
627
20.8
817.8 83,400
941
31.2
kgf
DID
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
4.03
4.42
4.82
9.19
10.1
11.0
17.1
18.8
20.5
32.0
35.1
38.3
46.1
50.6
55.2
59.7
65.6
71.5
73.0
80.2
87.4
86.0
94.5
103
14
15
16
5.23
5.63
6.04
11.9
12.8
13.8
22.2
24.0
25.7
41.5
44.7
47.9
59.8
64.4
69.1
77.5
83.4
89.5
94.7
102
109
17
18
19
6.44
6.85
7.27
14.7
15.6
16.6
27.4
29.2
30.9
51.2
54.5
57.7
73.7
78.4
83.1
95.5
102
108
20
21
22
7.68
8.10
8.51
17.5
18.5
19.4
32.7
34.5
36.2
61.0
64.3
67.6
87.9
92.6
97.4
23
24
25
8.93
9.35
9.77
20.4
21.3
22.3
38.0
39.8
41.6
71.0
74.3
77.6
28
30
32
11.1
11.9
12.8
25.2
27.2
29.1
47.0
50.7
54.3
35
40
14.1
16.2
32.1
37.0
59.8
69.1
25
50
100
150
200
250
300
350
400
450
500
98.8
109
118
111
122
133
118
135
148
101
115
130
112
120
129
128
138
148
145
156
167
161
173
186
145
161
177
117
124
132
138
146
155
158
168
178
178
190
201
198
211
223
194
211
229
198
114
120
126
139
147
154
164
173
182
188
199
200
212
224
235
236
249
262
247
266
285
214
231
247
102
107
112
132
139
145
162
169
177
191
200
209
219
229
240
247
259
270
275
288
301
302
316
330
264
282
299
87.7
94.5
101
126
136
146
164
176
189
200
216
231
236
254
272
271
292
313
306
329
353
340
366
392
373
402
431
355
394
434
112
129
161
186
208
241
255
294
300
347
345
398
389
449
432
499
475
549
496
598
550
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
56
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
180
180-2
180-3
Unit (mm)
Roller
Pitch link
width
Pin
Roller
dia.
57.15
35.72
35.71
Transverse
Pitch
71.5
77.3
41.6
65.8
7.1
54.2
46.6
Plate
203.3 209.1
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
kgf
DID
kgf
378.3 38,600
412
42,000
8,500
14.4
756.6 77,200
824
83.3
28.6
42.7
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
5.24
5.76
6.28
12.0
13.1
14.3
22.3
24.5
26.7
41.6
45.7
49.9
60.0
65.9
71.8
77.7
85.4
93.1
14
15
16
6.80
7.33
7.86
15.5
16.7
17.9
29.0
31.2
33.4
54.0
58.2
62.4
77.8
83.8
89.9
17
18
19
8.39
8.92
9.46
19.1
20.4
21.6
35.7
38.0
40.3
66.6
70.9
75.1
20
21
22
10.0
10.5
11.1
22.8
24.0
25.3
42.6
44.9
47.2
23
24
25
11.6
12.2
12.7
26.5
27.8
29.0
28
30
32
14.4
15.5
16.6
35
40
18.3
21.1
25
50
100
150
200
250
300
350
95.0
104
114
112
123
134
129
141
154
101
109
116
123
133
142
145
156
168
167
180
193
96.0
102
108
124
132
140
152
162
171
179
191
202
206
219
232
79.4
83.7
88.0
114
121
127
148
156
164
181
191
201
213
225
237
245
259
272
277
292
307
49.5
51.8
54.2
92.4
96.7
101
133
139
146
172
180
189
211
221
231
248
260
272
285
299
312
322
337
352
32.8
35.3
37.9
61.2
65.9
70.7
114
123
132
165
177
190
213
230
246
261
281
301
307
331
355
353
380
407
398
429
459
41.7
48.2
77.9
90.0
145
168
209
242
271
313
332
383
391
451
449
518
506
585
400
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
57
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
200
200-2
200-3
Unit (mm)
Roller
Pitch link
width
Pin
Roller
dia.
63.50
38.10
39.68
Transverse
Pitch
77.9
85.0
46.0
71.6
8.0
60.2
Plate
h
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
46,900
kgf
500
17.5
34.7
52.0
1,459.9
52.0 1,919.8
221.3 228.3
kgf
DID
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
10
11
12
13
6.95
7.63
8.32
10.0
11.0
12.0
13.0
14.2
15.5
18.7
20.5
22.4
24.2
26.6
29.0
29.6
32.5
35.4
34.8
38.3
41.7
45.1
49.6
54.1
55.2
60.6
66.1
79.5
87.3
95.2
103
113
123
126
138
151
14
15
16
9.01
9.71
10.4
13.0
14.0
15.0
16.8
18.1
19.4
24.2
26.1
28.0
31.4
33.8
36.3
38.4
41.3
44.3
45.2
48.7
52.2
58.6
63.1
67.7
71.6
77.1
82.7
103
111
119
134
144
154
163
176
189
17
18
19
11.1
11.8
12.5
16.0
17.0
18.1
20.7
22.1
23.4
29.9
31.8
33.7
38.7
41.2
43.7
47.3
50.3
53.6
55.8
59.3
62.9
72.2
76.8
81.4
88.3
93.9
99.6
127
135
143
165
175
186
201
214
227
20
21
22
13.3
14.0
14.7
19.1
20.1
21.2
24.7
26.1
27.4
35.6
37.5
39.5
46.1
46.8
51.1
56.4
59.4
62.5
66.5
70.0
73.7
86.1
90.7
95.4
105
111
117
152
160
168
196
207
218
240
253
266
23
24
25
15.4
16.1
16.9
22.2
23.2
24.3
28.8
30.1
31.5
41.4
43.4
45.3
53.7
56.2
58.7
65.6
68.7
71.8
77.3
80.9
84.6
100
105
110
122
128
134
176
185
193
228
239
250
279
292
28
30
32
19.1
20.5
22.0
27.4
29.6
31.7
35.6
38.3
41.1
51.2
55.2
59.2
66.4
71.5
76.6
81.1
87.4
93.7
95.6
103
110
124
133
143
151
163
175
218
235
252
282
304
326
35
40
24.2
28.0
34.9
40.3
45.2
52.3
65.2
75.3
84.4
97.5
103
119
122
140
158
182
193
222
277
320
359
415
15
20
30
40
50
60
80
100
150
200
250
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
58
High-strength
Roller Chain Series
HJ
Dimensions
Chain No.
DID
ANSI*
240
240-2
240-3
Unit (mm)
Roller
Pitch link
width
Pin
Roller
dia.
76.20
47.63
47.63
Transverse
Pitch
Plate
55.3
87.8
9.50
72.2
62.0
95.2 102.9
23.81 183.1 190.8 47.7
DID
DID
Min. Tensile
Strength
Avg. Tensile
Strength
kN
kN
kgf
0,666.8 68,000
270.9 278.6
DID
kgf
74,000
132
13,500
24.7
725
225
22,950
49.0
331
33,750
73.3
Note: The values of average tensile strength and maximum allowable tension are for chains.
*Equivalent to ANSI
Unit (kW)
Small sprocket rpm (Refer to P132 for the details of lubrication A, B and C.)
pe
of
Lu
No. of
bri
ca
Teeth of
tio
Small
n
Sprocket
11
12
13
5.95
6.53
7.12
11.1
12.2
13.3
16.0
17.6
19.1
20.7
22.8
24.8
25.3
27.8
30.3
29.8
32.8
35.7
38.6
42.5
46.3
47.2
51.9
56.6
55.7
61.1
66.7
72.1
79.2
86.4
14
15
16
7.72
8.31
8.91
14.4
15.5
16.6
20.7
22.3
24.0
26.9
29.0
31.0
32.8
35.4
37.9
38.7
41.7
44.7
50.1
54.0
57.9
61.3
66.0
70.8
72.2
77.8
83.4
17
18
19
9.52
10.1
10.7
17.8
18.9
20.0
25.6
27.2
28.8
33.1
35.3
37.4
40.5
43.1
45.7
47.7
50.8
53.8
61.8
65.8
69.7
75.6
80.4
85.2
20
21
22
11.3
12.0
12.6
21.2
22.3
23.5
30.5
32.1
33.8
39.5
41.6
43.8
48.3
50.9
53.5
56.9
60.0
63.1
73.7
77.7
81.7
23
24
25
13.2
13.8
14.4
24.6
25.8
26.9
35.5
37.1
38.8
45.9
48.1
50.3
56.1
58.8
61.4
66.2
69.3
72.4
28
30
32
16.3
17.6
18.8
30.4
32.8
35.2
43.8
47.2
50.6
56.8
61.2
65.6
69.4
74.8
80.2
35
40
20.8
24.0
38.7
44.7
55.8
64.4
72.3
83.5
88.4
102
10
15
20
25
30
40
50
60
80
100
125
150
88.1
96.8
106
108
118
129
127
139
152
93.6
101
108
114
123
132
140
151
161
165
177
190
89.1
94.7
100
115
123
130
141
150
159
172
183
194
203
216
229
90.1
95.0
99.9
106
112
118
138
145
152
168
177
186
206
217
228
242
255
85.7
89.7
93.8
105
110
115
123
129
135
160
167
175
196
205
214
239
250
262
81.8
88.1
94.5
106
114
122
130
140
150
153
164
176
198
213
228
242
260
279
296
318
341
104
120
135
156
165
190
194
224
252
291
308
355
Note: Values in the above table are for simplex chain only. For multiplex chains, please multiply the coefficient of multi-strand. (See "Chain Selection" on P120.).
59
High-strength
Roller Chain Series
Sprockets
Use standard sprockets for a simplex HK roller chain
Since the transverse pitches (C dimension: see P61) are
larger than those of standard chains in the case of
duplex or triplex, standard sprockets cannot be used.
Refer to the sprocket tooth profiles for HK (see P116~
117)
Recommended uses
Optimal for places where higher strength is required
but large and heavier chains cannot be used.
<Examples>
Asphalt finishers
Applicable
connecting link
Tensile Strength
Offset link
2-Pitch
Offset link
(Interference fit)
RJ: DID 50 & under FJ: DID 50 & under OJ: exclusive
use for HK
CJ: DID 80 & over HJ: DID 80 & over
unavailable
RJ/ CJ: DID 60
FJ/ HJ: DID 60
for DID 40HK & under
2POJ: exclusive
use for HK
unavailable
for DID 40HK & under
)(
Same as chain
60
115
120
Temperature
Range in Use
10
80
PETROLIUM
CONSTRUCTION
E
F
T
W
Tensile
strength index
f
D
h
P
RJ
R
FJ
F
CJ
C
HJ
H
Dimensions
Pitch
Chain No.
P
Unit (mm)
Roller
link Roller
width dia.
W
Pin
d
Min. tensile
strength
Plate
H
kN
kgf
Avg. tensile
strength
kN
kgf
DID 40HK
10.5
2.0
21.5
DID 50HK
12.6
2.4
36.3
DID 60HK
3.2
52.0
Note: 1. The values of average tensile strength and maximum allowable tension are for chains.
2. When grooving using sprockets with smaller number of teeth, the grooves may interfere with the chain outer plate. Consult us for advise.
3. Ask us for the delivery time.
CP
CJ
HJ
Dimensions
Chain No.
Unit (mm)
Pin
Transverse
Pitch
Plate
Min. tensile
strength
kN
kgf
P
W
D
d
E
G
e
g
C
T
H
h
1,081.3 008,300 1,096.1 009,800 016.6
036.1 038.7
DID 080HK
DID 080HK-2 25.40 15.88 15.88 07.94 068.5 071.3 18.1 20.6 032.6 4.0 24.0 20.8 1,162 016,600 1,192 019,600 028.3
1,244 024,900 1,288 029,400 041.6
101.2 104.0
DID 080HK-3
1,123 012,600 1,142 014,500 026.4
043.6 045.8
DID 100HK
DID 100HK-2 31.75 19.05 19.05 09.54 082.0 085.1 21.8 24.4 039.1 4.8 29.9 26.0 1,246 025,200 1,284 029,000 045.0
1,369 037,800 1,426 043,500 066.1
121.1 124.1
DID 100HK-3
1,166 017,000 1,191 019,500 034.3
054.1 056.5
DID 120HK
DID 120HK-2 38.10 25.40 22.23 11.11 102.2 105.5 27.1 29.9 048.9 5.6 35.9 31.2 1,332 034,000 1,426 039,000 058.3
1,498 051,000 1,573 058,500 085.8
151.1 154.4
DID 120HK-3
1,217 022,200 1,250 025,500 045.1
057.9 061.7
DID 140HK
DID 140HK-2 44.45 25.40 25.40 12.71 109.2 114.0 29.0 33.3 052.2 6.4 41.9 36.3 1,434 044,400 1,500 051,000 076.6
1,651 066,600 1,750 076,500 112.7
161.4 166.2
DID 140HK-3
1,277 028,300 1,318 032,500 058.8
068.0 071.6
DID 160HK
DID 160HK-2 50.80 31.75 28.58 14.29 133.9 135.1 34.0 38.2 061.9 7.1 47.8 41.4 1,554 056,600 1,637 065,000 100
1,831 084,900 1,956 097,500 147
195.6 197.1
DID 160HK-3
1,402 041,000 1,441 045,000 071.5
075.5 080.8
DID 180HK
DID 180HK-2 57.15 35.72 35.71 17.46 150.0 152.0 37.8 43.3 069.2 8.0 53.8 46.6 1,804 082,000 1,882 090,000 121
1,200 123,000 1,320 135,000 178
219.3 221.3
DID 180HK-3
1,486 049,600 1,558 057,000 083.3
084.4 091.7
DID 200HK
DID 200HK-2 63.50 38.10 39.68 19.85 170.0 172.3 42.2 49.4 078.3 9.5 60.0 52.0 1,972 099,200 1,110 114,000 141
1,450 148,800 1,670 171,000 208
248.4 250.7
DID 200HK-3
1,767 078,300 1,882 090,000 112
108.0 116.3
DID 240HK
DID 240HK-2 76.20 47.63 47.63 23.81 217.6 220.1 54.0 61.9 101.2 12.7 71.5 62.0 1,530 156,600 1,760 180,000 191
2,300 234,900 2,640 270,000 281
318.8 321.3
DID 240HK-3
Note: 1. The above chains are of riveted pin type (RP). As for cotter pin type (CP), consult us.
2. The values of average tensile strength and maximum allowable tension are for chains.
3. When grooving using sprockets with smaller number of teeth, the grooves may interfere with the chain outer plate. Consult us.
61
01,700
02,890
04,250
02,700
04,590
06,750
03,500
05,950
08,750
04,600
07,820
11,500
06,000
10,200
15,000
07,300
12,410
18,250
08,500
14,450
21,250
11,500
19,550
28,750
02.97
05.88
08.76
04.16
08.23
12.27
06.08
12.04
17.94
08.81
17.44
25.99
10.93
21.64
32.24
14.81
29.32
43.69
19.17
37.95
56.55
28.30
56.03
83.48
High-strength
Roller Chain Series
Allowable
Load
High-strength
Roller Chain Series
High-end type
of the high strength series
The DID HI-PWR-SHK roller chains have thicker link
plates than HI-PWR-S roller chains, and are the highest
in tensile strength and allowable load among general
application chains, thus being suitable for low speed
heavy duty transmission.
Tensile strength (%)
130
Recommended uses
The HI-PWR-SHK roller chains are 25 percent higher
in tensile strength and 50 percent higher in maximum
allowable load than the standard roller chains, but
since their weight is heavier, driving performance
declines at high speed. So, they are suitable for heavy
duty at low speed applications.
DID
HI-PWR-SHK
120
DID
HK
110
DID
HI-PWR-S
100
DID
STANDARD
90
<Examples>
80
ANSI
JIS
50
60
62
Tensile
strength index
150
125
Temperature
Range in Use
10
80
CONSTRUCTION
EXCAVATION MINING
Allowable
Load
Selection of chains
Select a proper HI-PWR-SHK type chain based on "Low-speed selection" (P121)
For the maximum allowable load, see the following table of dimensions.
HI-PWR-SHK series is available in simplex.
Sprockets
Connecting links and offset links
The best feature of the HI-PWR-SHK roller chains is high maximum allowable load. Therefore, interference-fitted
connecting links (H connecting links) with little strength degradation are used.
The connecting plate and the connecting pins are connected with spring pins. The tensile strength of an H connecting
link is equivalent to that of the chain, but the allowable load is somewhat lower than that of the chain.
HI-PWR-S type roller chains do not have any offset link. Use an even number of links.
Never make the holes of the connecting plate larger and never make the pins thinner to facilitate the work for fitting the
pins into the connecting plate, since otherwise the fatigue strength will be lowered.
HJ
Dimensions
Chain No.
Unit (mm)
Roller
Roller
Pitch link
dia.
width
P
Pin
d
Min. tensile
strength
Plate
G
kN
kgf
04.0
24.1
20.8 085.3
04.8
30.1
26.0 126
12,900 145
05.6
36.2
31.2 170
17,400 196
06.4
42.4
36.3 221
22,600 255
07.1
48.2
41.4 281
28,700 323
08.0
54.2
46.6 421
43,000 461
09.5
60.2
52.0 519
53,000 598
61,000 112
11,500 20.13
12.7
72.2
62.0 802
81,800 922
94,000 155
15,900 29.72
Note: 1. The values of average tensile strength and maximum allowable tension are for chains.
2. When grooving using sprockets with smaller number of teeth, the grooves may interfere with the chain outer plate. Consult us.
63
High-strength
Roller Chain Series
Name
Features
Functions
Main uses
High-strength
Roller Chain Series
Dirty
Environment
PACK
Tensile
strength index
Temperature
Range in Use
100
10
80
TEXTILE
Dusty
Dirty
Environment
HOME
APPLIANCE
TEXTILE
PACK
Tensile
strength index
Temperature
Range in Use
100
10
80
CONVEYOR
CONSTRUCTION
AGRICULTURE
25
35
41
40
50
60
80
100
120
140
160
200
240
Long Life
DH-
O-Ring
Sintered Bushing
HT
T
D
D
D
D
D
-
DHA
DHA
DHA
DHA
DHA
DHA
-
LD
LX
LX
LX
LD
LD
LD
LD
LD
LD
LD
UR, URN
UR, URN
UR, URN
UR, URN
-
Chain dimensions
Dimensions for Roller Chains for Transmission are shown on the pages of their descriptions
and dimensions for Small Chains for Conveyor System are on P148-P155.
64
Dusty
Dirty
Environment
Maintenance-Free
Tensile
strength index
Temperature
Range in Use
100
10
120
Maintenance-Free
CONVEYOR
FOOD
FOOD
PACK
TEXTILE
VENDING
MACHINE
CONSTRUCTION
HOME
APPLIANCE
AGRICULTURE
Tensile
strength index
Temperature
Range in Use
70
10
60
PACK
TEXTILE
CONVEYOR
HOME
APPLIANCE
Symbols
Main uses
Functions
Resistant against
Dirty
contaminated or
Environment deteriorated oil
Dusty
Resistant against
dusty circumstances
FOOD
PRINT
CONSTRUCTION
Maintenance-Free
No lubrication or
maintenance
Temperature
Range in Use Allowable ambient
10 temperature
100
Tensile
strength index Tension strength index
100
PACK
TEXTILE
CONVEYOR
VENDING
MACHINE
AGRICULTURE
Drive of agricultural
machines
65
Features
Functions
Main uses
Ultimate Life
Chain Series
Name
The Ultimate Life Chain Series includes two types of maintenance-free chains, O-Ring Chain and Sintered Bushing
Roller Chain. They can be applied in various conditions from low-speed to high-speed operation, or from low-load to
high-load operation as you can see in the chart below.
High
9
Safety rate
10
Chain load
Ultimate Life
Chain Series
12
13
Low
O-Ring Chain
X-Ring Chain
11
Sintered
Bushing
Roller Chain
14
100
Low
200
300
400
500
600
66
Normal environments
Dusty environments
512
O-ring/X-ring chain
520
1.3
1.53
DH- chain
1.23
1.84
Multiple of life
Multiple of life
New oil
Deteriorated oil
1.52
37
DH- chain
1.3
Multiple of life
1.21.5
Multiple of life
67
Ultimate Life
Chain Series
Ultimate Life
Chain Series
Seamless High-precision
Solid Bushings Prevent Chain Elongation
Solid Bushing chain is highly wear-resistant using cold
formed solid bushings with a seamless smooth surface
and complete roundness.
This is the popular type among the Ultimate Life Chain
Series with its improved grease retention between the
bushing and the pin.
The solid bushings and our patented V grease extend
the wear life from up to 4 times compared to standard
roller chains. We recommend you to adopt this solid
bushing chain if you are wishing to reduce the frequency
of maintenance.
Recommended uses
For improving wear resistance while retaining the
merits of standard roller chains.
For Circumstances where chain elongation occurs
frequently or lubrication is difficult.
Wear
68
100
Temperature
Range in Use
10
80
HOME
APPLIANCE
Selection of chains
Wear resistance
Sprockets
The dimensions of the solid bushing chain are the same
as those of the standard roller chain. The standard
sprocket can be used.
Operating time
(Tested by DAIDO)
T
W
f
d
h
P
P
RJ
(DID 60 or smaller)
CJ
(DID 80 or larger)
OJ
2POJ
Dimensions
Chain No.
Unit (mm)
Plate
3.30 2.31
09.0
09.5
05.2
1.00
05.9
h
kN
05.20 005.88
kgf
600 01.07
110
0.16
35T
12.0
13.1
07.3
13.9
7.8
1.25
09.0
220
0.32
40D
12.700 07.95
07.92
3.97
16.5
17.6
09.5
19.3
10.6
1.50
12.0
380
0.63
50D
15.875 09.53
10.16
5.09
20.3
21.9
11.6
23.1
12.1
2.00
15.0
700
1.06
25.4
26.9
14.3
30.0
15.7
2.40
18.1
950
1.44
DID
DID
DID
DID
Pin
Avg. tensile
strength
DID
60D
19.050 12.70
11.91
5.96
DID
80D
25.400 15.88
15.88
7.94
32.6
35.4
19.0
36.4
19.5
3.20
24.0
2.55
DID 100D
31.750 19.05
19.05
9.54
39.5
42.5
22.8
43.5
23.5
4.00
29.9
3.79
69
Tensile
strength index
Ultimate Life
Chain Series
Dirty
Environment
Ultimate Life
Chain Series
ized
bur
Car
(Test conditions)
qChain Sample: DID06B (p=9.525)
wDrive: 14N.T/10,000rpm33N.T/ 4242rpm
eTension: 30kgf (6.0kW)
rLubrication: By oil bath with wasted automobile engine oil
Recommended uses
Environments where soil, sand or dust directly comes
into contact with the chain (O-ring chains are
recommended if applicable.).
Applications where a chain is lubricated in an oil bath
and the oil is heavily deteriorated due to the
contamination of foreign objects.
To avoid chain kinking by heat between pin and
bushing.
Carburized pin
(Test conditions)
qChain Sample: DID40 (p=12.70)
wDrive: 21N.T/ 1090rpm21N.T/ 1090rpm
eTension: 140kgf (6.8kW)
rLubrication: Initial grease only. Continuous scattering of
sand on the chain in operation
Tested by DAIDO
70
10
80
100
CONSTRUCTION
AGRICULTURE
Comparison of properties
Selection of chains
Carburizing
Nitriding
H-Cr plating
DH-
High carbon
Iron nitride
Chrome
Chrome carbide
750850
7501,100
Actual thickness
of treated layer
100 or more
10 or more
Surface hardness
lowering temperature
Layer
9001,100 1,3001,500
10100
520
Peeling resistance
Wear resistance
Sprockets
Structure of DH-
Microstructure
Hard carbide
Pin
Soft -phase
T
W
F
f
d
h
P
P
RJ
(DID 60 or smaller)
OJ
CJ
(DID 80 or larger)
2POJ
Dimensions
Chain No.
Unit (mm)
Pin
Plate
Avg. tensile
strength
07.8
08.5
04.7
0.72
05.9
h
kN
05.20 04.41
kgf
450
0.73
75
0.13
12.0
13.1
07.3
13.9
07.8
1.25
09.0
07.75 11.20
1,150
2.15
220
0.32
07.77 3.59
DID 40 DHA 12.700 07.95 07.92 3.97
13.7
14.6
07.9
15.2
08.6
1.20
09.6
08.00 10.70
1,100
2.35
240
0.39
16.5
17.6
09.5
19.3
10.6
1.50
12.0
10.40 19.10
1,950
3.72
380
0.63
20.3
21.9
11.6
23.1
12.1
2.00
15.0
13.00 30.90
3,150
6.86
700
1.06
25.4
26.9
14.3
30.0
15.7
2.40
18.1
15.60 44.10
4,500
9.31
950
1.44
DID 25 DHA
DID 50 DHA
DID 60 DHA
71
Temperature
Range in Use
Tensile
strength index
Ultimate Life
Chain Series
Dusty
Dirty
Environment
Ultimate Life
Chain Series
Other features
Reducing noise. (The noise level is 3 dB lower compared
to standard roller chains.)
Reducing vibration with the friction created by ORing. (The power loss due to the friction is almost
negligible, since the frictional force between the pins
and bushings is for usually in the applications.)
Recommended uses.
Circumstances where frequent chain replacement is
required due to wear stretch
Circumstances where lubrication during the service is
impossible
O-ring chain
Elongation
Elongation
Dry circumstances
5 to 20 times
O-ring chain
5 to 12 times
Operating hours
Operating hours
Test conditions:
Dry: No contamination of dust or water in the ambient air
Dusty: With contamination of dust such as alumina
Initial lubrication only. No lubrication during service.
The operating hours of the chains are different. The operating time of a standard roller chain can be extended
when it is periodically lubricated or an oil bath is used during operation.
72
Tested by DAIDO
Temperature
Range in Use
Tensile
strength index
10
120
100
CONSTRUCTION
HOME
APPLIANCE
AGRICULTURE
Sprockets
O-ring chain uses longer pins than a standard roller
chain. When using multiplex O-ring chain, the standard
sprocket for multiplex chains cannot be used.
Caution
O-ring chain is not recommended in applications where
solvents or other substances may attack Nitric Rubber.
Special material O-rings are also available for these
conditions: Please consult us for details. In general,
Nitric Rubber is damaged by contact with the following
chemical materials.
Selection of chains
The strength of an O-ring chain is almost the same as
that of a standard roller chain. (Since the pins are longer
than those of standard roller chain, the average rupture
strength is slightly lower.)
For selecting a suitable chain, refer to "Selection of
Chains" (P120~123).
When the service ambient temperature is higher than 80
C, special heat resistant O-rings must be used. In this
case, contact us for more information.
Gasoline,
Light
oil,
Benzene,
Toluene,
Trichloroethylene, Ether, Ketone (MEK), Ethyl acetate,
Phosphoric acid, Ester hydraulic oil, Organic acid,
High-concentration inorganic acid
W E
F
f
d
D
P
Connecting link
Offset link
Chain No.
Clearance fit
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
35LD
40LX
50LX
60LX
80LD
100LD
120LD
140LD
160LD
200LD
240LD
NJ
Interference fit
CJ / HJ
RJ / FJ
F2
2POJ
f
F2
2 pitch
(offset
link )
BJ
(Cotter pin type. with nut)
2POJ
Dimensions
Chain No.
DID 35 LD
DID 40 LX
DID 50 LX
DID 60 LX
DID 80 LD
DID 100 LD
DID 120 LD
DID 140 LD
DID 160 LD
DID 200 LD
DID 240 LD
Unit (mm)
9.525
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
76.20
4.60
7.95
9.53
12.70
15.88
19.05
25.40
25.40
31.75
38.10
47.63
5.08
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
39.68
47.63
Pin
Avg. tensile
strength
Plate
kN
kgf
3.59
3.97
5.09
5.96
7.94
9.54
11.11
12.71
14.29
19.85
23.81
13.0
20.0
23.4
29.2
36.5
44.0
54.0
58.6
69.0
83.8
101.2
14.45
20.0
23.9
30.0
38.9
46.2
56.8
69.2
80.3
96.5
116.4
7.8
10.7
12.8
16.0
20.9
24.7
30.2
40.2
46.2
55.0
66.2
1.25
1.5
2.0
2.4
3.2
4.0
4.8
5.6
6.4
8.0
9.5
9.0
12.0
15.0
18.1
24.0
29.9
35.9
41.9
47.8
60.0
71.5
7.75
10.4
13.0
15.6
20.6
26.0
31.2
36.3
41.4
52.0
62.0
9.8
18.1
30.1
42.8
72.5
107.0
156.9
196
245
428
624
1,000
1,850
3,070
4,370
7,400
11,000
16,000
20,000
25,000
43,700
63,700
150
380
700
950
1,500
2.300
3,100
4,100
5,400
7,500
10,100
73
0.35
0.67
1.08
1.62
2.83
4.07
5.90
7.87
10.31
16.89
24.80
Maintenance-Free
Ultimate Life
Chain Series
Dusty
Dirty
Environment
Ultimate Life
Chain Series
Dry condition
Standard roller chain
Sintered bushing
roller chain
5 times
Elongation
Recommended uses
Circumstances where lubrication is difficult or elongation
of chain frequently occurs
Operating hours
Tested by DAIDO
74
70
Temperature
Range in Use
10
60
HOME
APPLIANCE
Selection of chains
As for sintered bushing roller chains, the inner plates are thicker and the pins are longer than those of standard roller
chains in order to compensate for the strength lowered by the use of sintered bushings.
For selecting a suitable chain, refer to "Selection of Chains" (P120~123). Use the tables of maximum kilowatt ratings for
sintered bushing roller chains that cover low speed ranges (P76~79).
For sintered bushing roller chains, "Low-speed selection" cannot be used since the "Maximum allowable load" in the
dimension table considers only the chain tensile tension and neglects the bushing strength.
Sprockets
Standard sprockets can be used for sintered bushing roller chains.
Sintered alloy
75
Tensile
strength index
Ultimate Life
Chain Series
Maintenance-Free
Ultimate Life
Chain Series
RJ
Dimensions
Unit (mm)
Chain No.
DID 40UR, URN
Pin
dia.
Plate
12.70
7.95
7.92
3.97
19.0
10.4
20.5
2.0
1.5
12.0
10.4
17.8
1,820
3.72
380
0.69
Note: The values of average tensile strength and maximum allowable load are for chains.
Unit(kW)
20
30
50
70
90
100
150
200
300
400
500
600
700
800
900
1000
1100
1200
1300
0.04
0.07
0.10
0.16
0.22
0.27
0.30
0.43
0.56
0.81
1.05
1.28
1.51
1.74
1.96
2.18
2.40
2.27
1.99
1.76
10 0.04
11 0.05
0.08
0.11
0.18
0.25
0.31
0.34
0.49
0.63
0.91
1.18
1.44
1.70
1.95
2.20
2.44
2.69
2.65
0.09
0.13
0.20
0.27
0.34
0.37
0.54
0.70
1.01
1.30
1.60
1.88
2.16
2.44
2.71
2.98
12 0.05
13 0.06
0.10
0.14
0.22
0.30
0.37
0.41
0.59
0.77
1.11
1.43
1.75
2.06
2.37
2.67
2.97
0.11
0.15
0.24
0.33
0.41
0.45
0.65
0.84
1.21
1.56
1.91
2.25
2.59
2.92
3.24
14 0.06
15 0.07
0.11
0.16
0.26
0.35
0.44
0.49
0.70
0.91
1.31
1.69
2.07
2.44
2.80
3.16
0.12
0.18
0.28
0.38
0.48
0.52
0.75
0.98
1.41
1.82
2.23
2.63
3.02
16 0.07
17 0.08
0.13
0.19
0.30
0.41
0.51
0.56
0.81
1.05
1.51
1.96
2.39
2.82
3.24
0.14
0.20
0.32
0.44
0.55
0.60
0.86
1.12
1.61
2.09
2.55
3.01
18 0.08
19 0.09
0.15
0.22
0.34
0.46
0.58
0.64
0.92
1.19
1.71
2.22
2.72
3.20
0.16
0.23
0.36
0.49
0.62
0.68
0.97
1.26
1.82
2.35
2.88
3.39
20 0.09
21 0.09
0.17
0.24
0.38
0.52
0.65
0.71
1.03
1.33
1.92
2.49
3.04
0.18
0.25
0.40
0.55
0.69
0.75
1.09
1.41
2.03
2.62
3.21
22 0.10
23 0.10
0.19
0.27
0.42
0.57
0.72
0.79
1.14
1.48
2.13
2.76
3.37
0.20
0.28
0.45
0.60
0.76
0.83
1.20
1.55
2.23
2.89
3.54
24 0.11
25 0.11
0.20
0.29
0.47
0.63
0.79
0.87
1.25
1.62
2.34
3.03
0.21
0.31
0.49
0.66
0.83
0.91
1.31
1.70
2.44
3.17
28 0.13
30 0.14
0.24
0.35
0.55
0.75
0.93
1.03
1.48
1.92
2.76
3.58
0.26
0.37
0.59
0.80
1.01
1.11
1.60
2.07
2.98
32 0.15
35 0.16
40 0.19
0.28
0.40
0.64
0.86
1.08
1.19
1.71
2.22
3.19
0.31
0.44
0.70
0.95
1.19
1.31
1.88
2.44
3.52
0.35
0.51
0.81
1.10
1.37
1.51
2.18
2.82
Note: The drive performance (kilowatt ratings) of sintered bushing chains is obtained on the basis of approx. 1,000 hour endurance time.
76
Ultimate Life
Chain Series
RJ
Dimensions
Unit (mm)
Chain No.
15.875 9.53
Pin
dia.
Plate
10.16
5.09
22.8
12.3
25.0
2.4
2.0
15.0
13.0
29.9
3,050
6.86
700
1.09
Note: The values of average tensile strength and maximum allowable load are for chains.
Unit(kW)
N. T
20
30
50
70
90
100
150
200
250
300
350
400
450
500
600
700
800
900
1000
0.09
0.17
0.24
0.39
0.53
0.66
0.72
1.04
1.35
1.65
1.95
2.23
2.52
2.80
3.08
3.63
4.17
4.37
3.66
3.12
10 0.10
11 0.11
0.19
0.27
0.43
0.59
0.74
0.81
1.17
1.51
1.85
2.18
2.50
2.82
3.14
3.45
4.07
4.67
5.11
4.29
0.21
0.30
0.48
0.65
0.82
0.90
1.29
1.68
2.05
2.42
2.78
3.13
3.48
3.83
4.51
5.18
5.84
12 0.12
13 0.14
0.23
0.33
0.53
0.72
0.90
0.99
1.42
1.84
2.25
2.65
3.05
3.44
3.82
4.20
4.95
5.69
0.25
0.36
0.58
0.78
0.98
1.08
1.55
2.01
2.46
2.89
3.32
3.75
4.17
4.58
5.40
6.20
14 0.15
15 0.16
0.27
0.39
0.63
0.85
1.06
1.17
1.68
2.18
2.66
3.14
3.60
4.06
4.52
4.96
5.85
0.30
0.43
0.67
0.91
1.14
1.26
1.81
2.34
2.87
3.38
3.88
4.38
4.87
5.35
6.30
16 0.17
17 0.18
0.32
0.46
0.72
0.98
1.23
1.35
1.94
2.51
3.07
3.62
4.16
4.69
5.22
5.74
0.34
0.49
0.77
1.04
1.31
1.44
2.07
2.68
3.28
3.87
4.44
5.01
5.57
6.12
18 0.19
19 0.20
0.36
0.52
0.82
1.11
1.39
1.53
2.20
2.86
3.49
4.11
4.72
5.33
5.92
6.51
0.38
0.55
0.87
1.18
1.48
1.62
2.34
3.03
3.70
4.36
5.01
5.65
6.28
20 0.22
21 0.23
0.40
0.58
0.92
1.24
1.56
1.71
2.47
3.20
3.91
4.61
5.29
5.97
6.64
0.42
0.61
0.97
1.31
1.64
1.81
2.60
3.37
4.12
4.86
5.58
6.29
22 0.24
23 0.25
0.45
0.64
1.02
1.38
1.73
1.90
2.74
3.55
4.34
5.11
5.87
6.62
0.47
0.67
1.07
1.45
1.81
1.99
2.87
3.72
4.55
5.36
6.16
6.94
24 0.26
25 0.27
0.49
0.71
1.12
1.51
1.90
2.09
3.01
3.90
4.76
5.61
6.45
0.51
0.74
1.17
1.58
1.98
2.18
3.14
4.07
4.98
5.86
6.74
28 0.31
30 0.33
0.58
0.83
1.32
1.79
2.24
2.47
3.55
4.60
5.62
6.63
0.62
0.90
1.42
1.93
2.42
2.66
3.83
4.96
6.06
7.14
32 0.36
35 0.40
0.67
0.96
1.53
2.07
2.59
2.85
4.10
5.32
6.50
0.74
1.06
1.68
2.28
2.85
3.14
4.52
5.86
7.16
40 0.46
0.85
1.23
1.94
2.63
3.30
3.62
5.22
6.76
Note: The drive performance (kilowatt ratings) of sintered bushing chains is obtained on the basis of approx. 1,000 hour endurance time.
77
Ultimate Life
Chain Series
RJ
Dimensions
Unit (mm)
width
dia.
Pin
Plate
5.96
28.9
15.8
33.1
3.2
2.4
18.1
15.6
42.1
4,300
9.31
950
1.71
Note: The values of average tensile strength and maximum allowable load are for
chains.
Unit(kW)
20
30
50
70
90
100
150
200
250
300
350
400
450
500
550
600
650
700
800
0.14
0.27
0.38
0.61
0.82
1.03
1.13
1.63
2.11
2.58
3.04
3.49
3.94
4.38
4.81
5.24
5.67
6.10
6.17
5.05
10 0.16
11 0.18
0.30
0.43
0.68
0.92
1.15
1.27
1.83
2.36
2.89
3.41
3.91
4.41
4.91
5.39
5.88
6.36
6.83
7.23
0.33
0.48
0.75
1.02
1.28
1.40
2.02
2.62
3.20
3.78
4.34
4.89
5.44
5.98
6.51
7.04
7.57
8.09
12 0.19
13 0.21
0.36
0.52
0.83
1.12
1.40
1.54
2.22
2.88
3.52
4.15
4.76
5.37
5.97
6.57
7.16
7.74
8.32
0.40
0.57
0.90
1.22
1.53
1.68
2.42
3.14
3.84
4.52
5.19
5.86
6.51
7.16
7.80
8.44
14 0.23
15 0.25
0.43
0.62
0.98
1.32
1.66
1.82
2.62
3.40
4.16
4.90
5.63
6.35
7.06
7.76
8.45
0.46
0.66
1.05
1.42
1.79
1.96
2.83
3.66
4.48
5.28
6.06
6.84
7.60
8.36
16 0.27
17 0.28
0.49
0.71
1.13
1.53
1.91
2.11
3.03
3.93
4.80
5.66
6.50
7.33
8.15
0.53
0.76
1.20
1.63
2.04
2.25
3.24
4.19
5.13
6.04
6.94
7.83
8.70
18 0.30
19 0.32
0.56
0.81
1.28
1.73
2.17
2.39
3.44
4.46
5.45
6.43
7.38
8.32
0.60
0.86
1.36
1.84
2.31
2.53
3.65
4.73
5.78
6.81
7.83
8.83
20 0.34
21 0.36
0.63
0.91
1.44
1.94
2.44
2.68
3.86
5.00
6.11
7.20
8.27
0.66
0.96
1.51
2.05
2.57
2.82
4.07
5.27
6.44
7.59
8.72
22 0.37
23 0.39
0.70
1.00
1.59
2.15
2.70
2.97
4.28
5.54
6.77
7.98
9.17
0.73
1.05
1.67
2.26
2.83
3.12
4.49
5.81
7.11
8.37
24 0.41
25 0.43
28 0.48
0.77
1.10
1.75
2.37
2.97
3.26
4.70
6.09
7.44
8.77
0.80
1.15
1.83
2.47
3.10
3.41
4.91
6.36
7.78
9.16
0.91
1.30
2.06
2.79
3.50
3.85
5.55
7.19
8.79
30 0.52
32 0.56
0.98
1.40
2.22
3.01
3.77
4.15
5.98
7.75
9.47
1.05
1.51
2.38
3.23
4.05
4.45
6.41
8.30
35 0.62
40 0.71
1.15
1.66
2.63
3.56
4.46
4.90
7.06
9.15
1.33
1.92
3.03
4.11
5.15
5.66
8.16
Note: The drive performance (kilowatt ratings) of sintered bushing chains is obtained on the basis of approx. 1,000 hour endurance time.
78
Ultimate Life
Chain Series
RJ
Dimensions
Unit (mm)
width
dia.
Pin
Plate
7.94
37.1
20.0
39.7
4.0
3.2
24.0
20.8
7,850
14.7
1,500
2.80
Note: The values of average tensile strength and maximum allowable load are for
chains.
Unit(kW)
20
30
40
50
60
70
80
90
100
120
140
160
180
200
250
300
400
450
500
550
600
0.35 0.64 0.93 1.20 1.47 1.73 1.99 2.24 2.49 2.74 3.23 3.71 4.19 4.65 5.12 6.25 7.37 9.55 10.62 11.67 11.16 9.79
2.23 2.51 2.79 3.07 3.62 4.16 4.69 5.21 5.73 7.01 8.26 10.70 11.89 13.08 13.07
3.21 3.61 4.02 4.42 5.21 5.98 6.74 7.50 8.25 10.08 11.88 15.39
4.20 4.74 5.27 5.80 6.83 7.85 8.85 9.84 10.82 13.22 15.58
5.22 5.89 6.55 7.20 8.48 9.75 10.99 12.22 13.43 16.42
2.47 2.79 3.10 3.41 4.01 4.61 5.20 5.78 6.35 7.77 9.15 11.86 13.18 14.50
2.71 3.06 3.40 3.74 4.41 5.06 5.71 6.35 6.98 8.53 10.05 13.03 14.48
2.96 3.34 3.71 4.08 4.81 5.52 6.23 6.92 7.61 9.30 10.96 14.20 15.79
3.45 3.89 4.33 4.76 5.61 6.44 7.27 8.08 8.88 10.86 12.80
3.70 4.18 4.64 5.10 6.01 6.91 7.79 8.66 9.52 11.64 13.72
3.95 4.46 4.96 5.45 6.42 7.38 8.32 9.25 10.17 12.43 14.65
4.46 5.03 5.59 6.14 7.24 8.32 9.38 10.43 11.47 14.02 16.52
4.71 5.31 5.91 6.49 7.65 8.79 9.91 11.02 12.12 14.82
4.97 5.60 6.23 6.85 8.07 9.27 10.45 11.62 12.78 15.62
5.48 6.18 6.87 7.55 8.90 10.22 11.53 12.82 14.09 17.23
5.74 6.47 7.19 7.91 9.32 10.71 12.07 13.42 14.76
6.00 6.76 7.52 8.26 9.74 11.19 12.62 14.03 15.42
7.30 8.23 9.15 10.06 11.86 13.62 15.36 17.08
7.83 8.83 9.81 10.79 12.71 14.61 16.47 18.31
Note: The drive performance (kilowatt ratings) of sintered bushing chains is obtained on the basis of approx. 1,000 hour endurance time.
79
Name
Functions
Features
Environment
Resistant
Chain Series
Corrosive
Atmosphere
Alkaline
Environment
Moisture,
Salt Water
Allowable
Load
OK
Corrosive
Atmosphere
Moisture,
Salt Water
Corrosive
Atmosphere
Allowable
Load
100
OK
Moisture,
Salt Water
Alkaline
Environment
100
OK
Allowable
Load
100
Main uses
Acidic
Environment
TEXTILE CONVEYOR
PARKING
TEXTILE CONVEYOR
WATER
TREATMENT
OUTDOOR
TEXTILE CONVEYOR
PARKING
CONSTRUCTION
PARKING
CONSTRUCTION
2
WATER
TREATMENT
OUTDOOR
FOOD CHEMICALS
25
35
41
40
50
60
80
100
120
140
160
180
200
240
N
N
N
N
N
N
N
N
N
N
N
-
HI-Guard
Double Guard
E
E
E
E
E
E
E
-
WG
WG
WG
WG
-
Stainless steel
Non O-Ring
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
-
80
SSK
SSK
SSK
SSK
SSK
SSK
-
X-Ring
SSLT
SSLT
SSLT
SSLT
-
Low temperature
TK
TK
TK
TK
TK
TK
TK
TK
-
(SSK)
qSUS304
wWhere chains is exposed to
chemicals, water and high
temperature.
eThe best resistance to
corrosion and heat.
Alkaline
Environment
Acidic
Environment
Temperature
Range in Use
Clean Areas
10
400
Corrosive
Atmosphere
Moisture,
Salt Water
Clean Areas
Alkaline
Environment
Allowable
Load
10
15
CONVEYOR
FOOD CHEMICALS
WATER
TREATMENT
Great Savings
Allowable
Load
10
CONVEYOR
Corrosive
Atmosphere
Alkaline
Environment
Temperature
Range in Use
Allowable
Load
40
80
100
FOOD
CONSTRUCTION
Dusty
Dirty
Environment
Allowable
Load
Acidic
Environment
Maintenance-Free
Temperature
Range in Use
10
200
FOOD CHEMICALS
WATER
TREATMENT
PACK
CONVEYOR
Features
Functions
Moisture,
Salt Water
Main uses
Corrosive
Atmosphere
Environment
Resistant
Chain Series
Name
(SS)
Symbols
Corrosive
Atmosphere Resistant against
corrosive gas
Alkaline
Moisture,
Salt Water Resistant against rain, Environment Resistant against
Functions
circumstances
required hygiene
Temperature
Range in Use Allowable ambient
20 temperature
400
Resistant against
Main uses
Dirty
contaminated or
Environment deteriorated oil
Maintenance-Free
No lubrication or
maintenance
Acidic
Environment Resistant against
alkali liquid
OK
Dusty
Coating tolerable
temperature
Resistant against
dusty circumstances
acid liquid
Allowable Allowable tension
Load
100
index
maintenance cost
can be saved
PACK
TEXTILE
CONVEYOR
FOOD
CHEMICALS
PARKING
WATER
TREATMENT water treatment
OUTDOOR
CONSTRUCTION
CHEMICALS
81
Environment
Resistant
Chain Series
25
24
23
DID 50
Standard Roller Chain
22
21
20
19
Features
18
17
15
14
16
13
12
11
3
10
9
8
Recommended uses
DID 50N
Rustless Chain
4
3
5
2
1
0
10
12
14
16
18
20
22
6
7
8
9
10
Time (Hrs)
(Tested by DAIDO)
82
Moisture,
Salt Water
Alkaline
Environment
Allowable
Load
100
OK
Selection of chains
The strength of Rustless Chain is equivalent with standard roller chains. For chain selection, refer to P120-122.
Corrosive
Atmosphere
Standard sprockets for Rustless Chains can be used since the dimensions are the same as standard roller chains.
Caution
qPlease use stainless steel chains when the chains are to be constantly exposed to water, sea water, liquid solutions
or corrosive solutions.
wUnless wot so specified by the customer, chains are coated with grease before delivery. Please use the
recommended lubricant (p.132) for the maintenance of the chain since lubrication using grease can cause lubrication
failure.
eConsult us if the chain is to be used for hoisting applications.
f
d
h
P
P
RJ
(#60 or smaller)
CJ
(#80 or larger)
OJ
2POJ
Dimensions
Chain No.
Pitch
P
Unit (mm)
Roller link Roller (Bush)
width
dia.
W
Pin
d
Avg. tensile
strength
Plate
kN
4.41
kgf
450
kN
0.73
kgf kg/m
75 0.13
7.8
8.5
4.7
0.72
5.9
5.20
12.0
13.1
7.3
13.9
7.8
1.25
9.0
7.75
11.2
1,150
2.15
220
0.32
7.77
3.59
13.7
14.6
7.9
15.3
8.6
1.20
9.6
8.00
10.7
1,100
2.35
240
0.39
7.92
3.97
16.5
17.6
9.5
19.3
10.6
1.50
12.0
10.40
19.1
1,950
3.72
380
0.63
20.3
21.9
11.6
23.1
12.1
2.00
15.0
13.00
30.9
3,150
6.86
700
1.06
DID
25N
6.35
DID
35N
9.525
DID
41N
12.70
6.38
DID
40N
12.70
7.95
DID
50N
15.875
9.53
10.16
5.09
DID
60N
19.05
12.70
11.91
5.96
25.4
26.9
14.3
30.0
15.7
2.40
18.1
15.60
44.1
4,500
950
1.44
DID
80N
25.40
15.88
15.88
7.94
32.6
35.4
19.0
36.4
19.5
3.20
24.0
20.80
78.4
8,000
14.7
1,500
2.55
DID 100N
31.75
19.05
19.05
9.54
39.5
42.5
22.8
43.5
23.5
4.00
29.9
26.00 118
12,100
22.5
2,300
3.79
DID 120N
38.10
25.40
49.7
53.0
28.2
54.1
28.2
4.80
35.9
31.20 166
17,000
30.4
3,100
5.49
53.6
58.4
31.6
59.6
31.7
5.60
41.9
36.30 215
22,000
40.2
4,100
7.11
63.6
68.2
36.4
69.7
36.5
6.40
47.8
41.40 269
27,500
52.9
5,400
9.82
DID 140N
44.45
25.40
22.23 11.11
25.40 12.71
DID 160N
50.80
31.75
28.58 14.29
83
9.31
Environment
Resistant
Chain Series
Sprockets
Environment
Resistant
Chain Series
Features
Since high guard coating acts as a sacrificial anode for
the chain body, you can expect sufficient corrosion
resistance even when the coating has come off to
some extent.
The coating consists of environmentally friendly
chromium free material. To comply with the EU's
Restriction of Hazardous Substances (RoHS) Directive,
hexavalent chromium is not used.
Wear resistance
Recommended uses
Rate of elongation
Operating time
84
(Tested by DAIDO)
Allowable
Load
100
OK
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
Selection of chains
Caution
Sprockets
Standard sprockets for High Guard Chains can be used
since their dimensions are the same as those of
standard roller chains.
f
d
h
P
P
RJ
(#60 or smaller)
CJ
(#80 or larger)
OJ
2POJ
Dimensions
Chain No.
Unit (mm)
9.525
Pin
Avg. tensile
strength
Plate
12.0
13.1
7.3
13.9
7.8
1.25
9.0
7.75
kN
10.2
kgf
1,050
kN
2.15
kgf kg/m
220 0.32
16.5
17.6
9.5
19.3
10.6
1.50
12.0
10.40
16.6
1,700
3.72
380
0.63
DID
35E
DID
40E
12.70
DID
50E
15.875
9.53
10.16
5.09
20.3
21.9
11.6
23.1
12.1
2.00
15.0
13.00
28.4
2,900
6.86
700
1.06
DID
60E
19.05
12.70
11.91
5.96
25.4
26.9
14.3
30.0
15.7
2.40
18.1
15.60
40.2
4,100
9.31
950
1.44
DID
80E
25.40
15.88
15.88
7.94
32.6
35.4
19.0
37.1
19.5
3.20
24.0
20.80
75.0
7,650
14.7
1,500
2.55
DID 100E
31.75
19.05
19.05
9.54
39.5
42.5
22.8
45.3
23.5
4.00
29.9
22.5
2,300
3.79
25.40
22.23 11.11
49.7
53.0
28.2
54.1
28.2
4.80
35.9
30.4
3,100
5.49
DID 120E
38.10
85
Moisture,
Salt Water
Environment
Resistant
Chain Series
Corrosive
Atmosphere
Environment
Resistant
Chain Series
Features
Recommended uses
Conditions that require both strength and corrosion
resistance
Multilevel parking facility, moving decks, cleansing lines etc.
Conditions exposed to rain or sea water
Machines installed outside, amusement machines
Conditions exposed to mild alkaline and mild acidic
chemical agents, sea water or wastewater. Various
chemical plants and water treatment plants.
Performance Comparison
Name
Code
Double-Guard
WG
Hi-Guard
Standard
100
(Double of High-Guard)
(Double of High-Guard)
100
100
(Rusting)
Nickel plated
100
Stainless steel
SS
010
86
Acidic resistance
(Cracking)
Acidic
Environment
Alkaline
Environment
Allowable
Load
100
OK
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
FOOD CHEMICALS
Selection of chains
Double Guard Chain has an equivalent strength to a standard roller chain. Please refer to p120~122 for chain selection.
Sprockets
Standard sprockets for high-guard chains can be used since the dimensions are the same as standard roller chains.
Caution
qUse stainless steel chains if the chains will come in direct contact with food.
wDouble Guard chain does not have a gloss like the nickel coated chain.
eUnless not so specified by the customer, chains are coated with grease and shipped. If possible, oil the spaces
between pins and bushes and bushes and rollers. Please use the recommended lubrication oil (P132) for the
maintenance of the chain as oiling with grease can cause flexion failure.
WE
P
h
RJ
CJ
2POJ
OJ
Dimensions
Unit (mm)
Max. allowable Approx.
load
weight
Chain No.
DID 40WG
12.70
7.95
7.92
3.97
16.5
17.6
9.5
19.3
10.6
1.50
12.0
10.40
kN
16.6
kgf
1,700
kN
3.72
kgf kg/m
380 0.63
DID 50WG
15.875
9.53
10.16
5.09
20.3
21.9
11.6
23.1
12.1
2.00
15.0
13.00
28.4
2,900
6.86
700
1.06
DID 60WG
19.05
12.70
11.91
5.96
25.4
26.9
14.3
30.0
15.7
2.40
18.1
15.60
40.2
4,100
9.31
950
1.44
DID 80WG
25.40
15.88
15.88
7.94
32.6
35.4
19.0
37.1
19.5
3.20
24.0
20.80
75.0
2.55
Pin
Avg. tensile
strength
Plate
87
Moisture,
Salt Water
Environment
Resistant
Chain SeriesGeneral
Corrosive
Atmosphere
Environment
Resistant
Chain Series
SS
Chain No.
kN
DID
DID
Recommended uses
Conditions exposed to mild alkaline and mild acidic
chemical agents, sea water and wastewater. Various
chemical plats and water treatment plants.
Conditions of high temperature
Heat-treating furnaces, dry furnaces, incinerators
DID
DID
DID
DID
DID
DID
C2040
C2042
C2050
C2052
C2060H
C2062H
45
0.686
70
0.68
70
1.03
105
1.03
105
1.57
160
kgf
340
0.117
12
35SS
7.55
770
0.264
27
45
DID
40SS
13.3
1,360
0.441
DID
50SS
20.9
2,130
0.686
70
DID
60SS
30.0
3,060
1.07
110
DID
80SS
53.4
5,450
1.76
180
DID 100SS
82.3
8,390
2.54
260
SSK
kgf
0.44
kN
kgf
3.33
Maximum allowable
load
25SS
Chain No.
Average tensile
strength
88
Average tensile
strength
Maximum allowable
load
kN
kgf
kN
kgf
DID 40SSK
13.3
1,360
0.686
70
DID 50SSK
20.9
2,130
1.03
105
DID 60SSK
30.0
3,060
1.57
160
DID 80SSK
53.4
5,450
2.65
270
DID 100SSK
82.3
8,390
3.82
390
Acidic
Environment
Clean Areas
Temperature
Range in Use
10
400
Allowable
Load
Allowable
Load
10
15
SS
SSK
Selection of chains
Corrosion resistance
Sprockets
Standard sprockets for Stainless Steel chains can be
used since the dimensions are the same as standard
roller chains.
Caution
qAs a general property of stainless steel, stress corrosion
cracking and pitting corrosion can be caused by chlorine
and chlorine ion (CR-).
wThe chart on right shows the data of tests on the level
of corrosion resistance for each medium and does
not guarantee the performance of the chains. Please
take into consideration the conditions, temperature,
level and other overall situation when using.
Dimensional Drawing
T
W
f
d
h
P
RJ
(#60 or smaller)
WATER
TREATMENT
Alkaline
Environment
Moisture,
Salt Water
P
CJ
(#80 or larger)
Medium
Standard
Stainless
steel
Aceton
Sulfurous gas (wet)
Sulfurous gas (dry)
Ammonia gas (cool)
Ammonia gas (hot)
Ammonia water
Ethanol
Sodium chloride, salt
Hydrochloric acid
Chlorine gas (wet)
Sea water
Hydrogen peroxide
Caustic soda (20%)
Gasoline
Potassium permanganate
Formic acid
Milk
Citric acid
Glycerin
Acetic acid (10%)
Bleaching powder, sodium hypochlorite
Carbon tetrachloride (dry)
Alcoholic soap
Oxalic acid (5%)
Oxalic acid (10%, boiled)
Nitric acid
Vinegar
Calcium hypochlorite
Baking soda
Water
Calcium hydroxide
Phenic acid, Phenol
Petroleum
Soapwater
Carbonic water
Sodium carbonate
Kerosene
Lactic acid (5%)
Lactic acid (10%, 65C)
Paraffin
Beer
Benzene, benzol
Boric acid (5%)
Pottasium alum
Methanol
Iodine
Butyric acid
Sulfuric acid
Phosphoric acid (10%)
Sodium sulfate (5%)
Wine
Environment
Resistant
Chain Series
Corrosive
Atmosphere
Dimensions
Unit (mm)
Approx.
weight
kg/m
DID
25SS
6.35
3.10
3.30
2.30
7.60
0.75
6.0
5.2
0.13
DID
35SS
9.525
4.68
5.08
3.58
11.80
13.20
7.15
1.27
9.0
7.8
0.34
DID
40SS
Chain No.
DID
50SS
Pitch
Roller link
width
Pin
Plate
40SSK
12.70
7.85
7.95
3.96
16.30
17.50
9.35
1.5
12.0
10.4
0.64
50SSK
15.875
9.40
10.16
5.08
20.50
21.60
11.35
2.0
15.0
13.0
1.06
25.85
18.1
15.6
1.56
DID
60SS
60SSK
19.05
12.57
11.91
5.95
27.00
14.10
2.4
DID
80SS
80SSK
25.40
15.75
15.88
7.93
32.50
34.70
18.45
3.2
24.1
20.8
2.62
31.75
18.90
19.05
9.53
40.30
42.35
22.20
4.0
30.1
26.0
4.13
89
Environment
Resistant
Chain Series
Rate of elongation
Standard (SS)
Recommended uses
Conditions continuously exposed to chemical agents, sea
water and wastewater.
Various chemical plants, water treatment plants
Conditions of high temperature
Heat-treating furnaces, dry furnaces, incinerators
Friction chart
Friction
100
Squashed
Twisted
50
O-Ring
90
X-Ring
Alkaline
Environment
Acidic
Environment
Dusty
Dirty
Environment
Maintenance-Free
Selection of chains
Connecting links
R connecting links are used for Stainless Steel Chains
#60 or smaller and C connecting links for #80 or larger.
Sprockets
The pins for the X-Ring chains are longer than those of
standard roller chains, and thus standard sprockets for
multiplex chain cannot be used for the X-Ring chains
when using this chain in multiplex.
Caution
qAs a general property of stainless steel, stress
corrosion cracking and pitting corrosion can be
caused by chlorine and chlorine ion (CR-).
wThe chart on right shows the data of tests on the level
of corrosion resistance for each medium and does
not guarantee the performance of the chains. Please
take into consideration the conditions, temperature,
level and other overall situation when using.
T
W
F
f
H
P
10
200
Allowable
Load
Great Savings
10
Corrosion resistance
Temperature
Range in Use
Moisture,
Salt Water
Clean Areas
Medium
Standard
Stainless
steel
Aceton
Sulfurous gas (wet)
Sulfurous gas (dry)
Ammonia gas (cool)
Ammonia gas (hot)
Ammonia water
Ethanol
Sodium chloride, salt
Hydrochloric acid
Chlorine gas (wet)
Sea water
Hydrogen peroxide
Caustic soda (20%)
Gasoline
Potassium permanganate
Formic acid
Milk
Citric acid
Glycerin
Acetic acid (10%)
Bleaching powder, sodium hypochlorite
Carbon tetrachloride (dry)
Alcoholic soap
Oxalic acid (5%)
Oxalic acid (10%, boiled)
Nitric acid
Vinegar
Calcium hypochlorite
Baking soda
Water
Calcium hydroxide
Phenic acid, Phenol
Petroleum
Soapwater
Carbonic water
Sodium carbonate
Kerosene
Lactic acid (5%)
Lactic acid (10%, 65C)
Paraffin
Beer
Benzene, benzol
Boric acid (5%)
Pottasium alum
Methanol
Iodine
Butyric acid
Sulfuric acid
Phosphoric acid (10%)
Sodium sulfate (5%)
Wine
Environment
Resistant
Chain Series
Corrosive
Atmosphere
Dimensions
Chain No.
Unit (mm)
Pitch
P
Single
Pitch
Chain
Roller link
Roller (Bush) dia.
width
Pin
Avg. tensile
strength
Plate
Max. allowable
load
Approx.
weight
kg/m
DID 40SSLT
12.70
7.95
7.92
3.96
20.0
10.7
1.5
12.0
kN
13.3
kgf
1,360
kN
0.441
kgf
45
DID 50SSLT
15.875
9.53
10.16
5.08
23.9
12.8
2.0
15.0
20.9
2,130 0.686
70
1.08
DID 60SSLT
19.05
12.70
11.91
5.95
29.8
16.0
2.4
18.1
30.0
3,060
1.07
110
1.62
DID 80SSLT
25.40
15.88
15.88
7.93
38.5
20.9
3.2
24.1
53.4
5,450
1.76
180
2.83
91
0.67
Environment
Resistant
Chain Series
Recommended uses
Inside freezers, conditions of high altitude or cold climates
-11C~ -30C
-31C~ -40C
Chain No.
kN
kgf
kN
DID 40TK
3.72
380
2.54
DID 50TK
6.86
700
4.80
DID 60TK
9.31
950
6.47
DID 80TK
14.70
1,500
10.29
92
kN
kgf
260
2.15
220
490
3.92
400
660
5.39
550
1,050
8.53
870
kgf
Moisture,
Salt Water
Temperature
Range in Use
40
80
Allowable
Load
100
CONSTRUCTION
Selection of chains
Sprockets
Caution
Please use lubrication oil for cold resistance for the
maintenance of the chain.
Environment
Resistant
Chain Series
W
f
d
h
P
RJ
(#60 or smaller)
P
CJ
(#80 or larger)
Dimensions
Chain No.
DID
40TK
Unit (mm)
Approx.
weight
kg/m
12.70
7.95
7.92
3.97
16.5
17.6
9.5
1.50
12.0
10.4
0.63
20.3
21.9
11.6
2.00
15.0
13.0
1.06
Pitch
Pin
Plate
50TK
15.875
9.53
10.16
5.09
DID
60TK
19.05
12.70
11.91
5.96
25.4
26.9
14.3
2.40
18.1
15.6
1.44
DID
80TK
25.40
15.88
15.88
7.94
32.6
35.4
19.0
3.20
24.0
20.8
2.55
DID
Corrosive
Atmosphere
93
Super Low Noise Chain (UN) has achieved a higher drive performance while having equivalent noise reduction
performance to Previous Low Noise Chain (TB). By improving the drive performance to the level of standard roller
chains, Low Noise Chains are now applicable to many more machines and equipment.
Features
Name
Low Noise
Chain Series
Max.
KW Rating
Noiseless
100
10dB
PRINT PACK
94
DID
DID
40
50
UN
UN
DID
DID
60
80
UN
UN
DID 40TB
VS
DID 40UN
No. of teeth
of small sprocket
100
(Unit: kW)
a
DID 40TB
2.
Noiseless
The noise emitted when the chain engages with the sprockets can
(dB)
Standard (STD)
Noise level
3.
Noise Comparison
The chains exhibit durability higher than Previous Low Noise chains
Super Low Noise (UN)
(r/min)
Revolutions (rpm)
Triple-layer roller
Standard (STD)
Steel
Rubber
Steel
Steel
Steel
Rubber
Standard connecting links and sprockets can be used. Offset links are specialized.
Low noise chains available in sizes DID40UN~80UN.
Preventing partial wear of sprockets and rails
Compared to Previous Low Noise chains, the steel rollers of the Super Low Noise are in staggered
assembling in the traveling direction to reduce partial wear of the sprockets and rails.
95
Low Noise
Chain Series
1.
Max.
KW Rating
Low Noise
Chain Series
70
Features
Super Low Noise Chain was developed in response to
the needs for a wider application of low noise chains
by modifying the triple-layer roller structure of the TB
Chain into a double layer roller. Noise reduction level
is equivalent to that of TB Chain.
60
Recommended uses
Circumstances requiring the drive performance of
chains at the noise level of belt conveyors
Printing machines, packaging machines, office
appliances etc
DID 80
Standard roller chain
50
DID 80UN
Super Low Noise Chain
40
100
200
Chain No.
96
Allowable load
DID 40UN
78 8
DID 50UN
11712
DID 60UN
19620
DID 80UN
31332
300
400
Tested by DAIDO
Load
100
10dB
Selection of chains
Caution
Nonflammable hydraulic oil (phosphoric esters, waterglycol fluid), oils containing extreme-pressure additives,
hot water, vapor, ester, ketone, organohalogen, pure
aromatic compounds, strong acid, strong basic agents,
strong acidic reagents, carbon disulfide, sulfur dioxide.
RJ
(DID 60 or smaller)
CJ
(DID 80)
OJ
2POJ
Dimensions
Unit (mm)
Pin
Avg. tensile
strength
Plate
kN
kgf
16.5
17.6
9.5
19.3
10.6
1.50
12.0
10.4
19.1
1,950
3.72
380
0.59
20.3
21.9
11.6
23.1
12.1
2.00
15.0
13.0
30.8
3,150
6.86
700
0.98
25.4
26.9
14.3
30.0
15.7
2.40
18.1
15.6
44.1
4,500
9.31
950
1.43
32.8
35.3
19.0
37.1
19.5
3.20
24.0
20.8
78.1
8,000
1,500
2.36
D1
7.95
9.53
D2
Note: 1. The values of the average tensile strength and maximum allowable tension are for the chain body.
2. Consult us for multiplex chains and other specifications.
3. Refer to the table "Allowable Load of Rollers" on P96 for an optimum sprocket.
97
14.7
Noiseless
Low Noise
Chain Series
Max.
KW Rating
Silent Chain
SCA, SCR, SC
Features
Name
Bicycle Chain
Main uses
Speciality
Chain Series
PRINT CONVEYOR
HOME
APPLIANCE
qUltra-precise chain
w4.7625 mm pitch available
eFor high-tech machines
HOME
APPLIANCE
98
Leaf Chain
PARKING
CONSTRUCTION
AGRICULTURE
CONSTRUCTION
CONVEYOR
AGRICULTURE
Main uses
Symbols
Feed and drive in the
conveyors and
transfer equipment
CONVEYOR
CONSTRUCTION
PACK
99
TEXTILE
AGRICULTURE
Drive of agricultural
machines
Main uses
Features
Name
PS
BS Roller Chain
(ISO B-series roller chain)
Agricultural
Roller Chain
Speciality
Chain Series
Silent Chain
Speciality
Chain Series
In addition to general chains, we also manufacture numerous chains developed for specific applications such as bicycle
chains and motorcycle chains.
Some specialty chains can be engaged with standard sprockets. Wear resistant properties of general chains are
included in the specifications of each type of specialty chains.
Specialty chains are classified as follows:
Bicycle Chain
Small Pitch Chain
Engine Mechanism Chain
Silent Chain
Agricultural Chain
Leaf Chain
BS type Roller Chain (British Standard Roller Chain)
100
Bicycle Chain
Speciality
Chain Series
Dimensions
Chain No.
DID 1/21/8
DID 1/21/8M
DID 1/21/8
DID 1/21/8 Track racer
DID 1/23/16
Unit (mm)
12.70
12.70
12.70
12.70
12.70
3.45
3.45
3.45
3.45
4.80
7.77
7.77
7.77
7.77
7.77
Pin
d
3.62 9.10
3.62 9.10
3.62 9.10
3.62 9.40
3.62 10.75
Plate
10.55
10.55
10.55
10.55
11.95
11.05
11.05
11.05
11.05
12.30
11.10
11.10
11.10
11.10
12.15
6.0
6.0
6.0
6.0
6.7
6.5
6.5
6.5
6.5
7.2
6.1
6.1
6.1
6.1
6.8
9.65
9.65
9.65
9.65
9.65
1.0
1.0
1.0
1.0
1.0
Note: 1. Bolt connecting link is the standard connecting link for the track racer chain.
2. M and (E) models are high anti-tight type.
3. The values of avg. tensile strength are for chains.
101
9.02
9.02
9.02
9.61
9.02
920
920
920
980
920
0.271
0.271
0.271
0.274
0.313
Speciality
Chain Series
Selection of chain
Refer to the "Low-speed selection" (P.121). However, the chain
operation speed can be set considerably high depending on the
type of lubrication as shown in the table below.
15
15H1
25
25H
25T
35
35T
Type A
Oil feeder, brush, drip
Type B
Oil bath, disk
200m/min or less
1200m/min or less
150
1000
110
1850
Type C
Forced pump feed
Over 1200m/min
R connecting link
Dimensions
Chain No.
DID 15
DID 15H1
DID 25
DID 25H
DID 25T
DID 35
DID 35T
Unit (mm)
Pitch
Bushing
Width Dia.
Dia.
4.7625
4.7625
6.35
6.35
6.35
9.525
9.525
2.40
3.18
3.18
3.18
3.18
4.78
4.78
2.48
2.48
3.30
3.30
3.30
5.08
5.08
1.62
1.62
2.31
2.31
2.31
3.59
3.59
Pin
Length
E
6.25 6.90
7.30
7.80 8.50
9.00 9.45
8.00 8.50
12.00 13.00
12.00 13.00
Plate
Baring area
Thickness Width
cm2
T
0.60
0.72
0.72
1.00
0.72
1.25
1.25
0.60
0.72
0.72
1.00
0.72
1.25
1.25
4.30
4.30
5.90
5.90
5.90
9.00
9.00
Note: The values of max. allowable tension are not applied to connecting links.
102
0.060
0.789
0.109
0.122
0.109
0.265
0.265
Avg. tensile
strength
kN
1.96
3.14
4.41
5.88
4.41
11.20
11.20
kgf
270
320
450
600
450
1,150
1,150
Max. allowable
load
kN
0.49
0.58
0.73
1.07
0.73
2.15
2.15
kgf
50
60
75
110
75
220
220
Approx.
weight
kg/m
0.089
0.103
0.134
0.163
0.134
0.332
0.332
Speciality
Chain Series
Dimensional Drawing
R connecting link
Dimensions
Chain No.
DID 25
DID 25H
DID 25SH
DID 25SD
DID 25-2
DID 25H-2
DID 215F DHA
DID 219H
DID 219HTM
DID 219FTS DHA
DID 219FTH1
DID 05T DHA
DID 05R SDH
DID 05S SDH
DID 270H
DID 270S DHA
DID 270FH DHA
DID 06B DHA
DID 06BH DHA
DID 06B-2
DID 317FM2
DID 317FM-2
Unit (mm)
RJ
RJ
RJ
RJ
RJ
RJ
6.35
6.35
6.35
6.35
6.35
6.35
7.00
7.774
7.774
7.774
7.774
8.00
8.00
8.00
8.50
8.50
8.50
9.525
9.525
9.525
9.525
9.525
3.18
3.18
3.18
3.18
3.18
3.18
3.50
5.00
4.60
5.00
5.00
4.61
4.61
4.61
4.75
4.75
4.75
5.72
5.72
5.72
5.05
5.05
3.30
3.30
3.30
3.30
3.30
3.30
4.00
4.59
4.59
4.59
4.59
4.71
5.65
5.65
5.00
5.00
5.00
6.35
6.35
6.35
6.35
6.35
Pin
Avg. tensile
strength
Plate
2.31
2.31
2.01
2.00
2.31
2.29
2.51
3.01
3.01
2.61
2.62
3.01
2.62
3.00
3.28
3.01
3.28
3.28
3.27
3.28
3.28
3.27
7.8
9.0
9.0
9.0
14.4
16.6
10.15
12.0
12.15
11.85
12.3
11.5
11.85
12.30
13.15
12.0
13.15
13.15
13.85
22.75
13.15
24.7
8.5
9.45
15.0
17.2
12.7
12.9
13.6
23.9
4.7
5.15
4.7
5.15
6.8
6.9
7.4
7.4
0.72
1.0
1.0
1.0
0.72
1.0
1.2
1.2
1.4
1.2
1.2
1.3
1.3
1.3
1.8
1.3
1.8
1.3
1.4
1.3
1.5
1.5
0.72
1.0
1.0
1.0
0.72
1.0
1.0
1.0
1.3
1.0
1.2
1.0
1.0
1.2
1.4
1.2
1.4
1.0
1.2
1.0
1.2
1.2
5.9
5.9
5.9
5.9
5.9
5.9
6.7
7.6
7.6
7.6
7.6
7.8
7.8
7.8
8.6
8.6
8.6
8.2
8.2
8.2
8.2
8.2
5.2
5.2
5.2
5.2
5.2
5.2
6.7
6.6
6.5
7.6
7.6
7.8
7.8
7.8
7.1
7.1
8.6
8.2
8.2
8.2
8.2
8.2
kN
4.41
5.88
5.09
5.59
8.23
10.79
8.14
7.74
9.80
8.92
8.92
9.61
8.97
12.1
12.1
10.7
14.7
10.4
11.1
19.4
12.7
24.3
Note: 1. Those marked with are bushing chains, and thus the values indicate bushing diameters.
2. Chains marked with have flat oval-shaped plates.
3. DH- treatment (DHA) is available. Consult us for DHA types.
4. The values of max. allowable load are not applied to connecting links. Don't use connecting links in engines.
103
kgf
450
600
520
570
840
1,100
830
790
1,000
910
910
980
915
1,230
1,240
1,100
1,500
1,070
1,130
1,980
1,300
2,480
75
110
93
90
120
180
165
130
180
180
220
220
220
305
220
200
250
200
270
320
330
500
0.13
0.16
0.17
0.17
0.26
0.38
0.26
0.27
0.30
0.31
0.33
0.33
0.37
0.40
0.39
0.33
0.50
0.39
0.43
0.74
0.28
0.81
Speciality
Chain Series
Silent Chain
SC silent chains (SCA, SCR, SC)
SC silent chains use specially-coated round pins and
special plates to achieve an ideal engagement
mechanism, and can keep a noise level remarkably
lower than conventional roller chains.
SC type silent chains can be used for high speed and
large tension transmission just like a toothed metallic
belt since the plates directly engage with the sprockets
for driving.
SCR-04 silent chains are designed with inner engaging
structure for further reduced noise level.
Dimensions
Chain No.
Unit (mm)
Pitch
P
6.35
6.35
8.00
9.525
3.20
5.10
7.15
3.20
5.10
7.15
8.65
17.65
20.85
6.00
8.10
11.00
6.00
8.10
10.30
12.75
22.70
26.00
104
06.70
06.85
08.70
10.10
kN
kgf
Approx. weight
kg/m
6.27
9.81
12.26
6.93
10.00
13.23
19.10
40.99
48.05
640
1,000
1,250
705
1,020
1,350
1,950
4,180
4,900
0.161
0.238
0.316
0.172
0.255
0.322
0.520
1.05
1.20
Silent Chain
PS silent chain
Speciality
Chain Series
Sprockets
Sprockets for DID silent chains adopt special modules
in involute tooth forms for the SCA 04, SC 25,
SC 06 on the previous page and PS silent chains to
ensure silent high speed operation. For all sizes, the
sprocket tooth heads are usually hardened by induction
hardening or carburizing.
Connecting pin
Locker pin
Dimensions
Chain No.
Unit (mm)
Pitch
P
kN
kgf
Approx. weight
kg/m
6.35
67
11.30
15.20
7.15
15.4
1,570
0.507
9.525
78
20.80
26.10
10.85
39.2
4,000
1.19
105
Speciality
Chain Series
HJ
RJ
Dimensions
Chain No.
DID
35
DID 35HS
DID 35HK2
DID 083
DID 415S
DID 420
DID 40
DID 40HK
DID 428
DID 428H
DID 520
DID 50
DID 520HK
DID 50HK
DID 50Y
DID 630K
DID 630HK
DID 630HKS
DID 630SK
DID 630FSK
DID 630FSK2
DID 635SK
DID 635ST
DID 60
DID 60H
DID 60HK
DID 60SK
HI-PWR-S80
HI-PWR-S80HK
DID 80GS
HI-PWR-S100
HI-PWR-S100HK
Unit (mm)
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
RJ
HJ
HJ
HJ
HJ
HJ
Pin
Plate
9.525
9.525
9.525
12.70
12.70
12.70
12.70
12.70
12.70
12.70
15.875
15.875
15.875
15.875
15.875
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
25.40
25.40
25.40
31.75
31.75
4.78
4.78
4.78
4.88
4.76
6.35
7.95
7.95
7.94
7.94
6.35
9.53
6.35
9.53
9.53
9.53
9.53
9.53
9.53
9.53
9.53
11.10
11.10
12.70
12.70
12.70
12.70
15.88
15.88
15.88
19.05
19.05
(5.08)
(5.08)
(5.08)
7.75
7.77
7.77
7.92
7.92
8.50
8.50
10.16
10.16
10.16
10.16
10.22
11.91
11.91
11.91
14.28
14.28
14.28
14.28
14.28
11.91
11.91
11.91
14.28
15.88
15.88
15.88
19.05
19.05
3.59
3.59
3.59
4.09
3.97
3.97
3.97
3.97
4.51
4.51
5.09
5.09
5.09
5.09
5.40
5.96
5.96
5.96
7.11
6.63
7.11
7.11
7.51
5.96
5.96
5.96
7.11
7.94
7.94
8.71
9.54
9.54
12.0
13.1
15.5
12.5
13.25
14.75
16.5
18.5
16.7
18.9
17.45
20.3
18.6
21.8
22.5
22.1
25.7
25.7
26.25
27.4
28.5
27.8
30.0
25.4
28.7
28.7
29.8
32.6
36.1
37.7
39.5
43.6
13.1
13.7
15.4
13.55
14.3
16.15
17.6
19.50
18.05
20.1
18.85
21.9
20.2
23.4
7.3
7.8
7.35
7.98
8.80
9.5
10.5
9.83
10.88
10.25
11.6
10.7
12.7
10.1
12.0
23.6 12.6
26.8 14.3
26.8 14.3
14.6
26.9 14.3
30.5 16.1
30.5 16.1
16.4
15.1
31.2
31.2
35.3
38.7
40.3
42.8
46.2
106
19.0
20.6
22.7
24.4
1.25
1.50
2.00
1.25
1.5
1.5
1.5
2.0
1.5
2.0
2.0
2.0
2.4
2.4
2.4
2.4
3.2
3.2
3.6
4.0
4.2
3.6
4.2
2.4
3.2
3.2
3.6
3.2
4.0
4.8
4.0
4.8
1.25
1.50
2.00
1.25
1.5
1.5
1.5
2.0
1.5
2.0
2.0
2.0
2.4
2.4
2.4
2.4
3.2
3.2
3.2
3.2
3.4
3.2
3.4
2.4
3.2
3.2
3.2
3.2
4.0
4.0
4.0
4.8
9.0
9.0
9.0
10.3
12.0
12.0
12.0
12.0
12.0
12.0
15.0
15.0
15.0
15.0
15.6
18.1
18.1
18.1
18.1
19.1
19.1
18.1
18.4
18.1
18.1
18.1
18.1
24.1
24.1
24.7
30.1
30.1
220
260
330
240
380
380
380
460
400
500
700
700
800
880
1,300
950
1,100
1,100
1,100
1,800
1,800
1,100
1,100
950
1,100
1,100
1,100
1,900
2,300
2,800
3,100
3,500
0.32
0.39
0.46
0.43
0.55
0.58
0.68
0.72
0.66
0.76
0.89
1.06
1.00
1.12
1.40
1.37
1.72
1.72
2.03
2.42
2.47
2.21
2.48
1.44
1.81
1.81
2.23
2.82
3.12
4.31
4.18
4.37
Speciality
Chain Series
Dimensional drawing
RJ
CJ
(DID 12B or smaller) (DID 16B or larger)
Dimensions
Chain No.
DID
DID 04B
Unit (mm)
Transverse
pitch
Pin
JIS B
6.00
2.80
4.00
1.85
6.45
7.35
7.60
8.60
13.25 14.25
13.15 13.6
DID 05B
05B
DID 05B-2
05B-2
DID 06B
06B
DID 06B-2
06B-2
22.75 23.9
DID 06B-3
06B-3
33.0
34.3
DID 08B
08B
16.7
18.1
DID 08B-2
08B-2
30.7
32.0
DID 08B-3
08B-3
44.6
46.0
DID 10B
10B
18.9
20.4
DID 10B-2
10B-2
35.5
37.0
DID 10B-3
10B-3
52.2
53.7
DID 12B
12B
22.2
23.6
DID 12B-2
12B-2
41.7
43.1
DID 12B-3
12B-3
61.3
62.7
DID 16B
16B
DID 16B-2
16B-2
DID 16B-3
16B-3
DID 20B
20B
DID 20B-2
20B-2
DID 20B-3
20B-3
DID 24B
24B
DID 24B-2
24B-2
DID 24B-3
24B-3
8.00
9.525
12.70
15.875
19.05
3.00
5.72
7.75
9.65
11.68
5.00
6.35
8.51
10.16
12.07
2.31
3.28
4.45
5.08
5.72
17.02
15.88
8.28
67.1
19.05
10.19
77.4
25.40
14.63 101.8
150.2
12.7
0.63
4.9
4.9
5.64
10.24
13.92
16.59
19.46
0.75
1.3
1.5
1.5
1.8
0.75
1.0
1.5
1.5
1.8
7.1
8.2
11.9
14.7
16.1
6.2
8.2
10.4
13.0
14.6
70.3
20.7
31.88
4.0
3.2
21.0
21.0
80.5
23.5
36.45
4.5
3.5
26.4
26.4
58.7
53.4
25.40
10.9
T
0.63
117.0
114.0
38.10
9.9
44.0
41.0
19.56
7.4
102.2
99.1
31.75
4.80
Plate
38.2
35.1
25.40
f
4.15
JIS
107.1
32.0
48.36
6.0
5.0
33.4
155.5
Note: 1. 2POJ offset links are used for DID04B and DID05B.
2. DID06B has flat oval-shaped plates.
3. Clip connecting links (RJ) are used for DID06B-12B and cotter connecting links (CJ) for DID16B-24B.
107
33.4
DID
Approx.
Avg. tensile strength Min. tensile strength weight
kN
kN
kgf kg/m
kgf
3.33
340
0.12
5.68
580
0.18
940
0.34
1,070
0.39
4.4
449
7.8
795
8.9
908
10.4
16.9
1,720
19.4
1,980
0.74
24.9
2,539
27.4
2,800
1.10
17.8
1,815
19.6
2,000
0.67
31.1
3,170
34.3
3,500
1.30
44.5
4,537
49.0
5,000
1.92
22.2
2,260
25.4
2,600
0.86
44.5
4,537
50.9
5,200
1.68
66.7
6,800
76.4
7,800
2.54
28.9
2,946
31.3
3,200
1.14
57.8
5,890
62.7
6,400
2.28
86.7
8,840
94.1
9,600
3.46
9.21
60
6,118
6,500
2.56
106
10,808
127
13,000
5.12
160
16,315
191
19,500
7.59
10,000
3.81
63.7
95
9,687
170
17,335
196
20,000
250
25,490
294
30,000
160
16,315
166
17,000
280
28,550
333
34,000
13.9
425
43,337
500
51,000
20.7
98.0
7.57
11.3
7.08
Speciality
Chain Series
Leaf Chain
Fitting
Dimensions
Unit (mm)
Plate
Pitch
Chain No.
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
422
444
466
522
544
566
622
644
666
822
844
866
1022
1044
1066
1222
1244
1266
1444
1446
1644
1666
423
434
446
523
534
546
623
634
646
823
834
846
1023
1034
1046
1223
1234
1246
1423
1434
1446
1623
1634
1646
H
Max
12.59
10.4
1.5
3.97
15.75
13.0
2.0
5.09
19.05
15.6
2.4
5.96
25.28
20.8
3.2
7.94
31.64
26.0
4.0
9.54
37.98
31.2
4.8
11.11
44.32
36.3
5.6
12.71
50.62
41.4
6.4
14.29
12.70
12.0
2.0
5.09
15.875
15.0
2.4
5.96
19.05
18.1
3.2
7.94
25.40
24.0
4.0
9.54
31.75
29.9
4.8
11.11
38.10
35.9
5.6
12.71
44.45
41.9
6.4
14.29
50.80
47.8
7.1
17.46
Pin
Min. tensile strength Max. allowable load Approx.
weight
L
L1
b
kN
kN
kgf
kgf kg/mMin
MaxMax
8.1
14.6
21.1
10.5
19.0
27.5
12.5
22.7
32.8
16.4
29.7
43.1
19.1
36.4
53.1
23.8
43.4
63.4
50.6
73.6
57.5
83.6
12.5
16.9
23.2
15.0
20.2
27.7
19.8
26.7
36.7
24.0
32.4
44.8
28.6
38.6
53.9
33.3
44.8
61.7
37.6
50.7
70.4
41.7
56.4
78.0
6.0
9.8
12.6
7.3
11.5
15.8
8.8
13.9
19.0
11.0
17.8
24.5
13.1
21.3
29.7
15.3
25.2
35.1
30.1
41.6
33.4
46.4
8.5
10.6
13.7
9.9
12.5
16.3
12.6
16.2
21.1
15.3
19.3
25.5
17.7
22.7
30.2
21.5
27.2
36.1
23.4
30.0
39.8
26.7
34.0
44.8
16.6
33.3
50.0
27.9
55.8
83.8
38.2
76.4
114
66.6
133
200
100
200
423
141
282
423
372
558
470
706
24.5
37.2
49.0
39.2
58.8
78.4
68.6
103
127
102
154
205
141
220
282
193
313
386
254
421
509
353
554
706
1,700
3,400
5,100
2,850
5,700
8,550
3,900
7,800
11,700
6,800
13,600
20,400
10,200
20,400
30,600
14,400
28,800
43,200
38,000
57,000
48,000
72,000
2,500
3,800
5,000
4,000
6,000
8,000
7,000
10,500
13,000
10,500
15,800
21,000
14,400
22,500
28,800
19,700
32,000
39,400
26,000
43,000
52,000
36,000
56,500
72,000
1.86
3.43
3.92
3.04
5.29
6.27
4.41
7.45
8.72
7.35
13.2
15.3
11.5
20.5
24.0
16.4
29.1
34.2
38.9
46.0
49.9
58.8
4.51
5.29
5.98
6.86
8.33
9.41
9.80
12.2
13.7
16.9
20.5
23.5
25.9
31.3
36.2
36.7
44.1
50.5
49.0
58.8
67.6
58.8
70.6
80.4
190
350
400
310
540
640
450
760
890
750
1,350
1,570
1,180
2,100
2,450
1,680
2,970
3,490
3,970
4,700
5,090
6,000
460
540
610
700
850
960
1,000
1,250
1,400
1,730
2,100
2,400
2,650
3,200
3,700
3,750
4,500
5,150
5,000
6,000
6,900
6,000
7,200
8,200
0.40
0.77
1.14
0.65
1.26
1.85
0.90
1.75
2.59
1.55
3.04
4.51
2.46
4.80
7.15
3.32
6.50
9.68
10.0
14.6
12.7
19.6
0.86
1.16
1.69
1.30
1.73
2.44
2.08
2.85
4.07
3.25
4.50
6.39
4.33
6.03
8.53
6.06
8.45
12.0
8.74
10.9
20.3
11.9
16.6
23.6
Note: 1. Except for Al-60 series, the pitch of AL type chains is slightly different to that of ANSI standard.
2. The values of max. allowable tension are not applied to connecting links.
108
Fitting
U
F
G
A
B
MinMinMin
Max
Min
4.00
6.3
6.3
5.12
7.9
7.9
6.00
9.5
9.5
8.00
12.7
12.7
9.60
15.8
15.8
11.20
19.0
19.0
12.80
22.2
22.2
14.40
25.4
25.4
5.12
6.3
6.3
6.00
7.9
7.9
8.00
9.5
9.5
9.60
12.7
12.7
11.20
15.8
15.8
12.80
19.0
19.0
14.40
22.2
22.2
17.60
25.4
25.4
3.3
3.3
4.3
4.3
5.1
5.1
6.8
6.8
8.4
8.4
10.0
10.0
11.6
11.6
13.2
13.2
2.2
4.3
2.6
5.1
3.4
6.8
4.2
8.4
5.0
10.0
5.9
11.6
6.7
13.2
3.3
3.3
4.3
4.3
5.1
5.1
6.8
6.8
8.4
8.4
10.0
10.0
11.6
11.6
13.2
13.2
4.3
6.4
5.1
7.6
6.8
10.1
8.4
12.5
10.0
14.9
11.6
17.4
13.2
19.8
7.4
14.6
14.6
11.9
3.0
9.3
15.7
4.0
12.3
20.7
4.8
14.7
24.7
6.4
19.8
32.9
8.0
24.4
40.9
9.6
29.2
48.9
34.0
56.9
38.8
64.9
6.0
10.3
16.3
7.2
12.3
19.5
9.7
16.2
26.0
12.1
20.2
32.4
14.4
24.2
38.8
16.8
28.0
45.2
19.2
32.0
51.6
21.3
35.5
57.2
3.3
9.7
16.1
4.3
12.7
21.1
5.1
15.1
25.1
6.8
20.1
33.4
8.4
24.9
41.4
10.0
29.7
49.4
34.5
57.4
39.4
65.5
6.3
10.7
16.8
7.5
12.7
20.0
10.0
16.9
26.6
12.4
20.9
33.0
14.8
24.9
39.4
17.3
28.8
45.9
19.7
32.8
52.3
21.8
36.3
57.9
Problem
Circumferential wear of
plate
Possible cause
Solution
Wear
Misalignment of
guide or pulleys
Stiff link
Dust or foreign
substances are
contained in a
bending portion
Corrosion and rust
Bent pin
Wear
Abnormal protrusion or
rotation of pin head
Normal pin
Service factor
When starts and
Smooth stops are smooth
transmission and loads hardly
vary.
Wear
Type of Impact
Rotating pin
Wear elongation
With
some
shock
1.2
Forklift, etc.
AL type and
BL type
With
large
shock
1.4
Mining and
construction
machinery, etc.
BL type and
DID roller
chains
Overload
Overload
Corrosion of pit
Normal wear
109
Speciality
Chain Series
BL type
AL type
Related Products
Related Products
1. Advantages of housing
Holding of lubrication
Since a roller chain coupling rotates with flexibility,
the teeth of the roller chain and sprockets slide
slightly during operation. So, they must be kept
lubricated for prevention of wear as much as
possible. The housing functions as a grease box for
the lubrication.
Prevention of grease scattering
Especially in high speed rotation, grease may be
scattered by centrifugal force. The housing functions
as a protector that prevents this.
Protection from dust and moisture (corrosive atmosphere)
When a roller chain coupling is used in a wearcausing or corrosive circumstances, the chain life is
extremely shortened unless the coupling is perfectly
shielded from the circumstances. The housing
functions to protect the roller chain coupling,
preventing the shortening of life.
High safety and neat appearance
Since the housing has no protrusions outside, it is
safe even if it rotates with the roller chain coupling. It
is also neat in appearance. (To avoid possible injury,
do not touch the housing when rotating.)
1. Simple structure
A roller chain coupling consists
of one duplex roller chain and
two sprockets for a simplex
chain. Handling is very simple
as both the shafts (driving
shaft and driven shaft) can be
connected and disconnected
by inserting or removing
connecting pins (cotter type).
2. Easy alignment
Owing to the play between the respective components
of the chain and the play between the roller chain and
the sprockets, the eccentricity and angle error can be
generally allowed as follows:
Eccentricity :
Up to 2% of the roller chain pitch
2. Structure
Angle error : Up to 1
When the roller chain coupling is used for high speed rotation (in the range of
lubrication types B and C), keep the allowances less than half of the above.
Cautions
4. Excellent durability
The roller chain is made of heat-treated steel and
manufactured precisely and solidly to the highest
manufacturing standard. The durability is outstanding
and little time is required for maintenance as the
sprockets have induction-hardened special teeth, and
are always engaged with the roller chain.
For safe
work
5. Protection of machine
Rational flexibility decreases vibration, overheating and
wear of the bearings caused by the eccentricities and
angle errors of the shafts.
Housings
and safety
covers
Standard housing
The standard housings for
No. 8022 or smaller are made
of aluminum alloy die casting,
and those for No. 10020 or
larger are made of aluminum
alloy casting. Installation of
housings has the following
advantages.
Inhibition of
modification,
re-use, and
partial
replacement
Noise
110
3. Greasing amount
Fill appropriate amount of grease in the housing in
accordance with the following table.
Type A
Type B
Type C
Required amount
Required amount
of grease
of grease
Roller chain coupling No.
kg
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
2. Grease
Since a roller chain coupling is usually used at high
speed for a long time, grease must satisfy the following
conditions.
Excellent in mechanical stability, oxidation stability
and adhesion.
Grease based on metallic soap: For low speed
0.10
0.13
0.17
0.22
0.26
0.36
0.5
0.7
0.9
1.2
C-4012
C-4014
C-4016
C-5014
C-5016
C-5018
C-6018
C-6022
C-8018
C-8022
kg
DID
DID
DID
DID
DID
DID
DID
DID
DID
C-10020
C-12018
C-12022
C-16018
C-16022
C-20018
C-20022
C-24022
C-24026
1.8
3.2
4.4
7.2
9.9
11.8
15.8
21.9
28.1
Dimensions
Unit (mm)
C-4012
C-4014
C-4016
C-5014
C-5016
C-5018
C-6018
C-6022
C-8018
C-8022
C-10020
C-12018
C-12022
C-16018
C-16022
C-20018
C-20022
C-24022
C-24026
4012
4014
4016
5014
5016
5018
6018
6022
8018
8022
10020
12018
12022
16018
16022
011022
014028
016032
016035
018040
018045
022056
028075
032080
040100
045110
050125
056140
063160
080200
082205
100255
120310
150360
10
10
14
14
14
14
18
18
23
28
40
45
50
55
70
75
90
110
140
75
84
92
102
111
122
142
167
186
220
255
280
330
375
440
465
545
650
745
75
75
75
85
85
85
106
106
130
130
160
184
190
240
245
285
300
340
350
A
max.
0061
0069
0077
0086
0096
0106
0128
0152
0170
0203
0233
0255
0303
0340
0405
0425
0506
0607
0704
79.4
79.4
87.4
99.7
99.7
99.7
123.5
123.5
141.2
157.2
178.8
202.7
222.7
254.1
310.1
437.5
477.5
650
700
36
36
40
45
45
45
56
56
63
71
80
90
100
112
140
200
220
302.5
327.5
7.4
7.4
7.4
9.7
9.7
9.7
11.5
11.5
15.2
15.2
18.8
22.7
22.7
30.1
30.1
37.5
37.5
45.0
45.0
35
43
50
53
60
70
85
110
115
140
160
170
200
225
280
290
360
445
525
Note: 1. Dimension G indicates the required margin for assembling and deassembling of the roller chain coupling.
2. Allowable rotation is applicable only when the housing is mounted.
M06
M06
M06
M08
M08
M08
M10
M10
M12
M12
M12
M12
M12
M16
M16
M20
M20
M20
M20
000.249
000.329
000.419
000.620
000.791
000.979
001.810
002.610
003.920
005.640
008.400
012.700
018.300
026.400
038.100
054.100
077.800
137.000
186.000
00,025.4
00,033.6
00,042.8
00,063.3
00,080.7
00,099.9
00,185.0
00,267.0
00,400.0
00,576.0
00,857.0
01,300.0
01,870.0
02,700.0
03,890.0
05,520.0
07,940.0
14,000.0
19,000.0
4,800
4,800
4,800
3,600
3,600
3,000
2,500
2,500
2,000
1,800
1,800
1,500
1,250
1,100
1,000
0,800
0,600
0,600
0,500
0,001.10
0,001.30
0,001.85
0,002.70
0,003.25
0,004.25
0,007.30
0,011.60
0,016.15
0,024.30
0,039.70
0,053.80
0,077.10
0,108.00
0,187.00
0,286.00
0,440.00
0,869.00
1,260.00
00,000.55
00,000.97
00,001.44
00,002.80
00,003.70
00,005.63
00,013.73
00,029.50
00,052.00
0,111.00
0,244.00
0,394.00
0,781.00
1,453.00
3,222.00
5,098.00
11,110.00
31,000.00
59,850.00
GD2
10-3
kgfm2
000,002.20000
000,003.85000
000,005.76000
000,011.20000
000,014.80000
000,022.50000
000,054.90000
000,118.00000
000,208.00000
000,444.00000
000,976.00000
001,575.00000
003,122.00000
005,811.00000
012,890.00000
020,390.00000
044,450.00000
124,100.00000
239,400.00000
111
Related Products
1. Lubrication types
Related Products
Related Products
Operating
time/day
1.0
1.5
2.0
1.5
2.0
2.5
2.0
2.5
3.0
1.5
2.0
2.5
2.0
2.5
3.0
2.5
3.0
3.5
2.0
2.5
3.0
2.5
3.0
3.5
3.0
3.5
4.0
14
0.40
19
0.75
0.4
Roller chain
coupling
No.
DID C-4012
1.5
2.2
3.7
0.75
1.5
2.2
24
28
28
DID C-4016
5.5
7.5
3.7
5.5
38
38
DID C-5016
11
7.5
11
42
42
DID C-5018
Unit (kW)
kgfm
10
25
50 100 200 300 400 500 600 800 1000 1200 1500 1800 2000 2500 3000 3600 4000 4800 5200 6000
DID C-40120 000.249 00,025.4 0.03 0.13 0.26 0.65 1.31 2.00 3.11 4.06 4.91 5.72 6.48 7.94 9.33 10.6 12.6 14.5 15.7 18.9 21.9 25.6 28.1 33.0
DID C-40140 000.329 00,033.6 0.03 0.17 0.35 0.86 1.73 2.65 4.12 5.37 6.50 7.56 8.58 10.5 12.3 14.1 16.7 19.2 20.8 25.0 29.0 33.9 37.1 43.6
DID C-40160 000.419 00,042.8 0.04 0.22 0.44 1.10 2.20 3.38 5.25 6.84 8.28 9.64 10.9 13.3 15.7 17.9 21.2 24.5 26.6 31.8 37.0 43.2 47.3 55.6
DID C-50140 000.620 00,063.3 0.07 0.33 0.65 1.63 3.25 4.99 7.75 10.1 12.2 14.2 16.1 19.7 23.2 26.5 31.4 36.1 39.3 47.0 54.7 63.8
DID C-50160 000.791 00,080.7 0.08 0.41 0.83 2.07 4.14 6.35 9.88 12.8 15.5 18.1 20.5 25.1 29.5 33.8 40.0 46.1 50.0 59.9 69.7 81.3
DID C-50180 000.979 00,099.9 0.10 0.51 1.03 2.57 5.13 7.87 12.2 15.9 19.3 22.4 25.4 31.1 36.6 41.8 49.5 57.0 62.0 74.2 86.3
DID C-60180 001.810 00,185.0 0.19 0.95 1.91 4.77 9.54 14.6 22.7 29.6 35.8 41.7 47.3 57.9 68.1 77.8 92.1 106 115 138
DID C-60220 002.610 00,267.0 0.27 1.37 2.74 6.86 13.7 21.0 32.7 42.6 51.6 60.0 68.1 83.4 97.9 112 132 152 165 198
DID C-80180 003.920 00,400.0 0.41 2.06 4.11 10.2 20.6 31.5 49.0 63.8 77.3 89.9 102 124 146 167 198 228 248
DID C-80220 005.640 00,576.0 0.59 2.96 5.91 14.8 29.6 45.3 70.4 91.8 111 129 146 179 211 241 285 329 357
DID C-10020 008.400 00,857.0 0.88 4.40 8.80 22.0 44.0 67.4 104 136 165 192 218 267 314 359 425 489
DID C-12018 012.700 01,300.0 1.33 6.67 13.3 33.4 66.7 102 159 207 251 292 331 405 476 544 644
DID C-12022 018.300 01,870.0 1.92 9.60 19.2 48.0 96.0 147 228 298 361 420 476 583 685 783
DID C-16018 026.400 02,700.0 2.78 13.9 27.8 69.5 139 213 331 431 523 608 690 845 992
DID C-16022 038.100 03,890.0 4.00 20.0 40.0 100 200 306 476 621 752 875 992 1210 1420
DID C-20018 054.100 05,520.0 5.67 28.3 56.7 142 283 434 675 880 1060 1240 1400 1720
DID C-20022 077.800 07,940.0 8.15 40.8 81.5 204 408 625 971 1260 1530 1780 2020
DID C-24022 137.000 14,000.0 14.4 72.2 144 361 722 1100 1720 2240 2710 3160 3580
DID C-24026 186.000 19,000.0 19.5 97.7 195 489 977 1490 2320 3030 3670 4270
Type of lubrication
112
Hub dt2
Shaft t1
bh
Parallel key Sloped key
Shaft dia.
d
0Over 6
008
010
012
017
8 or less
010
012
017
022
22
33
44
55
66
01.2
01.8
02.5
03.0
03.5
d01.0
d01.4
d01.8
d02.3
d02.8
d00.5
d00.9
d01.2
d01.7
d02.2
020
022
030
038
044
025
030
038
044
050
77
87
1008
1208
1409
04.0
04.0
05.0
05.0
05.5
d03.0
d03.3
d03.3
d03.3
d03.8
d03.0
d02.4
d02.4
d02.4
d02.9
050
050
058
065
075
055
058
065
075
085
1510
1610
1811
2012
2214
05.0
06.0
07.0
07.5
09.0
d05.0
d04.3
d04.4
d04.9
d05.4
d05.0
d03.4
d03.4
d03.9
d04.4
080
085
095
110
125
090
095
110
130
140
2416
2514
2816
3218
3522
08.0
09.0
10.0
11.0
11.0
d08.0
d05.4
d06.4
d07.4
d11.0
d08.0
d04.4
d05.4
d06.4
d11.0
130
140
150
160
170
150
160
170
180
200
3620
3824
4022
4226
4525
12.0
12.0
13.0
13.0
15.0
d08.4
d12.0
d09.4
d13.0
d10.4
d07.1
d12.0
d08.1
d13.0
d09.1
5028
17.0
d11.4
d10.1
200
230
Shaft dia.
d
10 or more
0Over 13
020
030
040
Shaft t1
Hub dt2
0404
0505
0707
1008
1208
02.5
03.0
04.0
04.5
04.5
d01.5
d02.0
d03.0
d03.5
d03.5
050
060
070
080
095
060
070
080
095
110
1510
1812
2013
2416
2818
05.0
06.0
07.0
08.0
09.0
d05.0
d06.0
d06.0
d08.0
d09.0
110
125
140
160
180
125
140
160
180
200
3220
3522
3824
4226
4528
10.0
11.0
12.0
13.0
14.0
d10.0
d11.0
d12.0
d13.0
d14.0
5031.5
5635.5
16.0
18.0
d15.5
d17.5
200
224
113
13 or less
020
030
040
050
Dimension of key
bht2t1
224
250
Related Products
Related Products
PAT.
DID C-Top is a plastic cover for chains that can be easily attached. It has
sufficient load strength for chains conveying goods. Unlike conventional
plastic chains, it can be used under high tension as stainless steel chains.
It is an ideal solution for the use that requires the strength of steel chains
free from concerns of damaging, soiling, and jamming of products. It also
prevents operators from being caught by the chains. It can also be used as
the cover for chains used for elevating devices such as multilevel parking
machines.
Related Products
Applicable chains
Can be attached to chains corresponding
to ANSI #40, 50, 60.
Dimensions
Cover No.
Unit (mm)
Weight (g/link)
Dimension (mm)
P
D
E
F
DID CT-40 12.70
27
10
7.6
DID CT-50 15.88
32
12
9.5
DID CT-60 19.05
37
14
11.2
Material: POM 200/package
A, B
4.5
7.6
11.5
Live load
DID CT-40
06kg/pitch
DID CT-50
08kg/pitch
DID CT-60
10kg/pitch
Color
The standard color for this product is
blue gray. Other colors can be provided
depending on the quantity. Consult us.
DID Chain Lube (420 ml)/ DID HI-PWR Lube (330 ml)
Chain Lube is a spray type lubricant that was developed
specifically for chains. It has outstanding features that
lengthens the chain life preventing it from wearing and
maximizes the chain's transmission efficiency.
Applications
Features
Chain lube
(Mainly for drive use)
114
HI-PWR lube
(Mainly for conveyor use)
Hub
type
21
teeth
General cautions
Construction
Material
Without
hub.
Standard
specification does not include
hardening of tooth heads.
Flat plane
(A type)
Single
Single
Double
Cast steel
Rolled steel for general
structural purposes
Double
Single
Single
Double
Double
115
Cast steel
Sprocket
Sprocket
Sprocket
Sprocket
Dimensions of Sprocket
Sprockets can be classified into standard sprockets, HK
sprockets and other sprockets.
1. Standard sprocket
3. Other sprockets
2. HK sprocket
HK sprockets can be engaged with HK series roller chains,
and those for single strand chains are identical to standard
sprockets. However, sprockets for multiple strand chains
are different from standard sprockets in sprocket tooth
profile. See the corresponding table in P117.
Pitch line
Item
Pitch diameterDp
P
Dp
180
sin
N
P: Chain pitch
N: Number of sprocket teeth
Tooth width
Standard tip
180
Do DoP0.6cot
diameter
NN
Root diameterDB DBDpDr
N
1
P
Dr
180
2sin
2N
Single strand
T0.93W0.15
Double or triple strands T0.90W0.15
(T)
Four or more strands T0.86W0.30
W: Inner width of chain
CW (4.22Plate thickness)
Q0.5P
Caliper diameterDc
Formula
Item
Formula
116
3.2
6.8
3.5
6.4
2.8
2.7
2.4
Unit (mm)
34.4
DID 15
0.5 20 2.6
2.0
DID 35
4.8 10.2
5.2 10.1
4.3
4.1
3.8
54.3
DID 06B
4.2
9.5
5.3
DID 41
6.4 13.5
7.0
5.8
DID 083
6.4
13.5
7.0
4.5
DID 40
6.4 13.5
7.0 14.4
7.2
7.0
6.5
78.5
DID 415
6.4
13.5
7.0
4.3
DID 50
7.9 16.9
8.8 18.1
8.7
8.4
7.9
98.4
DID 420
6.4
13.5
7.0
5.8
DID 60
DID 428
6.4
13.5
7.0
7.2
7.9
16.9
8.8
5.8
5.0 10.24
DID 80 12.7
DID 520
DID 525
7.9
16.9
8.8
7.2
DID 630
9.5
20.3 10.6
8.7
DID 635
9.5
20.3
10.1
97.8 163.6
67.5 35.2 71.6 35.3 34.1 32.5 105.7 177.3 247.3 318.9 390.5
81.0 42.3 87.8 44.1 42.7 40.7 130.5 218.3 304.1 391.9 479.7
Unit (mm)
DID
25Hk
3.2
6.8
3.5
2.8
DID
35HK
4.8 10.2
5.2
4.3
DID
40HK
6.4 13.5
7.0
7.2
DID
50HK
7.9 16.9
8.8
8.7
DID
60HK
11.7
DID
80HK
46.7
79.3
DID 100HK
56.1
95.2
DID 120HK
71.6 120.5
DID 140HK
74.9 127.1
DID 160HK
90.3 152.2
DID 180HK
DID 200HK
DID 240HK
117
10.6
Unit (mm)
Sprocket
Sprocket
Sprocket
Example:
In the case of DID80 (25.40 mm pitch) with 35 teeth
Pitch diameter (Dp)
PPitch diameter factor
25.4011.1558283.36
Tip diameter (Do)
PPitch diameter factor
25.4011.711297
Root diameter (DB)
Pitch diameter (Dp)Roller diameter (Dr)
283.3615.88267.48
Caliper diameter factor (Dc)
PCaliper diameter factorRoller diameter (Dr)
25.4011.144615.88267.19
Note: Above sign () means approximate value.
Number Pitch dia. Tip dia. Caliper dia. Number Pitch dia. Tip dia. Caliper dia. Number Pitch dia. Tip dia. Caliper dia. Number Pitch dia. Tip dia. Caliper dia.
of teeth factor
factor
factor of teeth factor
factor
factor of teeth factor
factor
factor of teeth factor
factor
factor
11
3.5495
4.006
12
3.8637
13
4.1786
14
4.4940
15
4.8097
16
3.5133
39
12.4275
12.987 12.4174
4.332
40
12.7455
13.306
4.657
4.1481
41
13.0635
13.625 13.0539
4.981
42
13.3815
13.944
5.304
4.7834
43
13.6995
14.263 13.6902
5.1258
5.627
44
14.0175
14.582
17
5.4422
5.949
5.4190
45
14.3356
14.901 14.3269
18
5.7588
6.271
46
14.6536
15.219
19
6.0755
6.593
6.0543
47
14.9717
15.538 14.9634
20
6.3925
6.914
48
15.2898
15.857
21
6.7095
7.235
6.6907
49
15.6079
16.176 15.5999
22
7.0267
7.555
50
15.9260
16.495
23
7.3439
7.876
7.3268
51
16.2441
16.813 16.2364
24
7.6613
8.196
52
16.5622
17.132
25
7.9787
8.516
7.9630
53
16.8803
17.451 16.8729
26
8.2962
8.836
54
17.1984
17.769
27
8.6138
9.156
8.5992
55
17.5166
18.088 17.5094
28
8.9314
9.475
56
17.8347
18.407
29
9.2491
9.795
9.2355
57
18.1529
18.725 18.1460
30
9.5668
10.114
58
18.4710
19.044
31
9.8845
10.434
9.8718
59
18.7892
19.363 18.7825
32
10.2023
10.753
60
19.1073
19.681
33
10.5201
11.073 10.5082
61
19.4255
20.000 19.4190
62
19.7437
20.318
63
20.0618
20.637 20.0556
34
10.8380
11.392
35
11.1558
11.711 11.1446
36
11.4737
12.030
37
11.7916
12.349 11.7810
38
12.1096
12.668
64
20.3800
20.956
65
20.6982
21.274 20.6922
66
21.0164
21.593
67
21.3346
21.911 21.3287
68
21.6528
22.230
69
21.9710
22.548 21.9653
70
22.2892
22.867
71
22.6074
23.185 22.6018
72
22.9256
23.504
73
23.2438
74
23.5620
24.141
75
23.8802
76
24.1984
24.778
77
24.5167
78
24.8349
25.415
79
25.1531
80
25.4713
26.052
81
25.7896
82
26.1078
26.689
83
26.4261
95 30.2449
30.828 30.2408
96 30.5632
31.147
97 30.8815
31.465 30.8774
98 31.1997
31.784
99 31.5180
32.102 31.5140
100 31.8362
102 32.4727
104 33.1093
106 33.7458
108 34.3823
110 35.0188
84
26.7443
27.326
85
27.0625
86
27.3807
27.962
87
27.6990
88
28.0172
28.599
89
28.3355
90
28.6537
29.236
91
28.9720
92
29.2902
29.873
93
29.6085
30.192 29.6042
94
29.9267
30.510
118
112 35.6554
114 36.2919
116 36.9285
118 37.5650
120 38.2016
32.421
32.739 32.1506
33.057
33.376 32.7872
33.694
34.013 33.4238
34.331
34.649 34.0604
34.968
35.286 34.6970
35.605
35.923 35.3336
36.241
36.560 35.9702
36.878
37.197 36.6068
37.515
37.833 37.2434
38.152
38.470 37.8800
38.788
S-tooth form
U-tooth form
Sprocket
Item
Ds
Formula
U0.07PDr0.051
(S-tooth form: U=0)
(Pitch clearance)
P: Chain pitch
U
60
A35
N
Formula
Gab1.4Dr
Ds2R1.055Dr0.076
Item
180
K1.4Dr cos
N
180
V1.4Dr sin
N
FDr 0.8cos
56
64
1.4cos17
18
N
N
1.3025 0.038
N: Number of teeth
56
B18
N
U
Pt
U
180 sin
180
H F 21.4Dr
cos
N
2
N
2
2
DsDr
Chordal pitch equal to chain pitch P1
Pt
Dp
Pt
180
180
ScosHsin
2
N
N
ac
ac0.8Dr
60
Q0.8Dr cos 35
Approximate
outer diameter
of sprocket
60
T0.8Dr sin 35
Outer diameter of
sprocket when
sprocket tooth
heads are sharp
Ecy1.3025Dr0.038
Maximum
pressure
angle
Pt
180
0.6cot
N
180
Pt cot2H
N
(In this case, generally this formula is corrected to obtain the outer diameter.)
120
Maximum pressure angle
xab35
N
(Pressure angle in the case of a new chain)
xy
28
xy2.605Dr0.076sin9
Minimum
pressure
angle
yz
64
yzDr 1.4sin17
N
56
0.8sin18
Average
pressure
angle
119
64
N
92
N
Designing of Chain
Transmission
1.0
1.0
1.2
1.3
1.2
1.4
1.5
1.4
1.7
1.7
2.5
3.3
3.9
Shaft diameter
See Table 1.
See Table 2.
Speed ratio
A speed ratio refers to the ratio of the speed of the driving
shaft to the speed of the driven shaft, and usually a speed
ratio of 7:1 or less is safe. If the speed ratio is larger than
this ratio, the take-up angle of the chain on the small
sprocket decreases, and chain jumping or abnormal wear
of sprocket are likely to occur. If a large speed ratio is
necessary, two-step speed change may be necessary.
121
Rotating factor
CV
0.903
10 rpm or less
1.00
11
0.923
20 r/min
0.933
13
0.939
30 r/min
0.896
15
0.952
40 r/min
0.871
20
0.978
50 r/min
0.851
23
0.990
100 r/min
0.794
26T or larger
1.00
200 r/min
0.741
Designing of Chain
Transmission
Low-speed selection
Double
Triple
Number of
chain strand
500
1000 700 4 0 0
600
800
700 500 3 0 0
600 400
500
200
300
400
300 200
23
17
1
23 3
40
D2
17
DI
D1
1
23 3
80
00
17
DI
13
17
DI
D1
23
40
60
D1
DI
13
20
00
D1
DI
D1
DI
17
23
17
0
D8
23
DI
DI
13
D5
17
23
DI
D6
13
13
17
3
23
0.8
0.7
0.6
0.5
0.4
0.3
30
23
5
D3
DI
1
13 7
D2
0.5
DI
13
1
0.1
0.7
0.6
0.5
1
0.9
0.8
0.7
0.6
23
17
DI
13
D4
17
8
7
6
5
4
10
9
8
7
6
5
13
10
8
7
6
5
D2
20
20
10
20
23
30
30
30
13
40
50
40
DI
80
70
60
50
80
70
60
50
40
17
100
23
100
100
90
80
70
60
1
23 7
200
Corrective kW value
Designing of Chain
Transmission
0.4
0.3
0.4
0.2
0.3
0.2
0.1
1
10
50
100
500
1000
5000
122
Single
Double
Triple
Number of
chain strand
Designing of Chain
Transmission
500
1000 700
600
800
700 500
600 400
500
300
400
400
300
200
150
300 200
100
80
70
100 60
80 50
100 70 40
60
80
70 50 30
60 40
20
50
30
40
200
30
-S
10
10
10
8
7
6
5
4
3
8
7
6
5
4
3
R
W
21 7 I - P
1 H
13
0
21
24
17
-S
R
13
0
W
0
6
21
8
-P
1
I
1 S
17
21 7 H
0
-S RR W
1
13
14
W
P
-S
0
13 I - P H I 2
R
1
H
21
W
-S
17
I-P
21
R
0
H
W
17 21
10
13
P
3
I1
0
-S
17
H
8
R
13
W
-S
R
I-P
W
H
21
P
I17
H
13
20
20
20
8
7
6
5
4
3
2
2
1
1
0.8
0.7
0.6
0.5
0.4
0.8
0.7
1 0.6
0.8 0.5
0.7 0.4
0.6
0.5 0.3
0.4
0.2
0.3
0.3 0.2
0.1
1
10
20
30
50
70
123
100
200
300
Designing of Chain
Transmission
DID80 or larger
NA
NA
NA
Catalog value0.50
Catalog value0.50
NA
Catalog value0.75
Catalog value0.75
NA
Catalog value
Catalog value
Catalog value
(Max. allowable load at normal temperature)
Catalog value
Catalog value
Catalog value
(Max. allowable load at normal temperature)
Catalog value0.33
Catalog value0.50
Catalog value
(Max. allowable load at normal temperature0.70)
Catalog value0.25
Catalog value0.33
Catalog value
(Max. allowable load at normal temperature0.58)
NA
Catalog value0.25
Catalog value0.46
(Max. allowable load at normal temperature0.46)
NA
NA
Catalog value0.41
(Max. allowable load at normal temperature0.41)
-60C or less
NA
NA
NA
Temperature
Please be aware that ambient temperature and the temperature of chains may differ.
3.
4.
N1 N2
N 2 N 1 2 2
2 Cp
2
Cp
N2N1
2
can be obtained from the following table.
Cp
Cp
Lp
N1
N2
0.03
0.10
0.23
0.41
0.63
0.91
1.24
1.62
2.05
2.53
3.07
3.65
4.28
4.97
5.70
6.49
7.32
8.21
9.14
10.13
11.17
12.26
13.40
14.59
15.83
17.12
18.47
19.86
21.30
22.80
24.34
25.94
27.59
29.28
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
31.03
32.83
34.68
36.58
38.53
40.53
42.58
44.68
46.84
49.04
51.29
53.60
55.96
58.36
60.82
63.33
65.88
68.49
71.15
73.86
76.62
79.44
82.30
85.21
88.18
91.19
94.25
97.37
100.54
103.75
107.02
110.34
113.71
117.13
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
N1N2
2
2
2N2N1 can be obtained from the following table.
:
:
:
:
N1N2
2
N }
{L
2 L
2
N2N1
120.60
124.12
127.69
131.31
134.99
138.71
142.48
146.31
150.18
154.11
158.09
162.12
166.19
170.32
174.50
178.73
183.01
187.34
191.72
196.16
200.64
205.17
209.76
214.40
219.08
223.82
228.61
233.44
238.33
243.27
248.26
253.30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
125
2
2
N2N1 N2N1
2
0.20
0.81
1.82
3.24
5.07
7.30
9.93
12.97
16.41
20.26
24.52
29.18
34.25
39.72
45.59
51.88
58.56
65.66
73.15
81.06
89.37
98.08
107.20
116.72
126.65
136.99
147.73
158.87
170.42
182.38
194.74
207.51
220.68
234.26
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
2
2
N2N1 N2N1
2
248.24
262.63
277.42
292.62
308.22
324.23
340.64
357.46
374.69
392.32
410.35
428.79
447.64
466.89
486.55
506.61
527.07
547.95
569.22
590.91
612.99
635.49
658.39
681.69
705.40
729.51
754.03
778.96
804.29
830.02
856.17
882.71
909.66
937.02
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2
2
N N
2 2 1
964.78
992.95
1021.52
1050.50
1079.88
1109.67
1139.87
1170.46
1201.47
1232.88
1264.69
1296.91
1329.54
1362.57
1396.01
1429.85
1464.09
1498.74
1533.80
1569.27
1605.13
1641.41
1678.08
1715.17
1752.66
1790.55
1828.85
1867.55
1906.66
1946.18
1986.10
2026.43
Designing of Chain
Transmission
Desirable layout
When a roller chain is used, shaft positions can be arbitrarily determined. However, in principle, follow the illustration
shown below. That is, if the chain is tensioned horizontally, keep the top tensioned. Avoid vertical transmission
whenever possible. In an inevitable case, place the large sprocket at the bottom regardless of the direction of rotation.
Undesirable layout
Travel
Idler
Tensioner
Spring type
tensioner
Tensioner
Designing of Chain
Transmission
Layout
Note:
Chordal
action
refers
to
the
vertical motion of
chain caused when
it is engaged with
sprockets.
126
Guide stopper
Maintenance
Installation of sprockets
For smooth transmission and extended life of the roller
chain, it is important to correctly install proper sprockets.
Use the following installation procedure.
AB
to 1/300 or less.
L
Maintenance
Installation
127
Allowance (mm)
1m or less
1m10m
Cmm1000
10m or more
10
Maintenance
Maintenance
Cautions
1. When a connecting plate is fastened by a spring clip,
apply the spring clip to the pin grooves of the
connecting pins as illustrated below, and lock it using
pliers, etc. As for the direction of spring clip insertion,
keep the opening of the spring clip turned in the
direction opposite to the direction of chain rotation, as
illustrated below.
Direction of rotation
128
3. Connecting procedure
qConfirm that O-rings are attached to the roots of
the pins.
wIf the amount of grease applied on the connecting
pins is small, coat the pins with grease at the
central portions.
eInsert the connecting pins into the bushings of the
inner links at both ends.
rConfirm that the grease is applied to the entire face
of the O-ring, and fit the O-ring onto the connecting
pins.
tInsert the connecting pins into the connecting plate
and while pressing the connecting plate, install the
spring clip. Confirm whether the head (the end
without a split) of the spring clip is turned in the
feeding direction of the chain. (See the following
illustration.)
yBe sure to confirm that the spring clip is securely
fitted in the clip grooves of the connecting pins.
Sprocket tooth
129
Maintenance
Maintenance
Maintenance
Maintenance
Check
Confirm that the connection is sufficient and that components have no problem.
Confirm that bending is smooth
(in the case of O-ring chain, bending is slightly stiff).
Chain sprocket
attachment
Interference
Lubrication
Confirm that the amount of lubrication is appropriate. (For the amount of lubrication, see the table of lubrication types.)
Confirm that the axial measurement and parallel measurement are proper.
Confirm that the difference of sprocket planes is within the allowance.
Peripheral equipment
Caution
Obstacles may cause breaking or fracturing which can
scatter materials and injure people nearby. Be sure to
remove all obstacles.
Abnormal noise Abnormal noise during operation is a sign of trouble.
Immediately switch off the power, and determine the cause.
Flaws and rust If any serious flaws or rust is visible, it may cause the chain
to break and fracture and possibly injure people nearby.
Confirm that the chain has no serious flaws or rust.
If a sprocket is worn, the sprocket may break, or the chain
Sprocket
may ride over the sprocket, breaking it and possibly
resulting in injury to people nearby. Confirm that the
sprockets are not worn.
Install accident prevention devices.
Devices that
prevent accidents To avoid human injury caused by scattered materials,
install safety devices (safety cover, safety net, etc.).
Install an emergency stop device.
To avoid human injury due to unexpected overload, install
an emergency shutdown device such as a load controller
or a brake.
Obstacles
L1L2
2
roller
Chain elongation
Maintenance
Optimum sag
Adjust
Other checks
Checking sprocket
If a sprocket is not installed at the correct position of the
shaft or is not parallel to the shaft, the plates of the chain
may be flawed, or the chain may be twisted. This can be
judged by examining the contact
faces of the sprocket teeth. In this
illustration, a uniform contact as
indicated by A is normal. If the
contact is different on both sides
as indicated by B, correction is
necessary.
Checking idler or tensioner
When sag is adjusted, check also whether the idler or
tensioner itself is damaged. If the contact between an idler
or tensioner and a chain is at the center of the tooth gap
bottom as indicated by C, it is normal. If the contact is as
indicated by A or B, the bearing of the idler or tensioner
may be abnormal.
Checking chain attachments
In the case of a chain with attachments, it can result in
accidents if a mounted part is loosely installed or comes
off. Furthermore, if an installation hole is enlarged due to
wear, the chain life may be shortened.
Adjust
131
Maintenance
Maintenance
Lubrication
Necessity of lubrication
Lubricating points
Requirements of lubrication
Selection of lubricant
Lubricating points
Lubrication type
(lubricating method,
lubrication intervals,
amount of lubrication)
Lubricating points
qBetween outer links and inner links (for prevention of elongation)
wBetween bushings and inner plates (for noise reduction and
protection against wear and impact damage on bushings and rollers.)
Pin
Roller
Bushing
Inner plate
Outer plate
Selection of lubricant
Atmospheric temperature 10
DID 25DID 50
DID 60DID 80
DID 100
DID 120DID 240
Oil
A, B
Type of lubrication
Chain No.
40
4050
5060
SAE10W
SAE20
SAE30
SAE40
SAE20
SAE30
SAE40
SAE30
SAE40
SAE50
SAE50
10
40
4050
5060
SAE10W
SAE20
SAE30
SAE40
SAE20
SAE30
SAE40
SAE50
Special kind of lubricant must be applied when ambient temperature is -10C or lower or 60C or higher. Please consult us for appropriate selection of lubricant.
132
Lubrication type
Caution
Lubricator
Brush
Drip lubrication
Supply about 5 to 20
drops of oil per minute.
Use DID
chain lube
(see P.114).
B
Disk lubrication
Disk
C
Pump
133
The allowable kilowatt ratings of chains shown in table of the drive performance (kW ratings) is based on the condition
that any of the following lubrication is adopted. If any of the following lubrication cannot be adopted or in
circumstances where earth, sand or dust exists, see the DID Ultimate Life Chain Series (see P.64).
Maintenance
Lubrication types (Explanation of A, B and C in the tables of Drive performance (kW ratings)
Maintenance
Maintenance
In the case of drip lubrication, oil bath lubrication or forced feed lubrication
Check the following:
1. The lubricant is not dirty.
2. The amount of lubricant is correct.
3. Lubricant is uniformly applied to the chain.
Cautions
Troubleshooting Guide
Trouble
A pin, bushing
or roller is
fractured.
Note: See
"Fracture patterns
of respective chain
components" on
P.136.
Possible cause
Correction
Decelerate the speed, or select a chain with a smaller pitch. Otherwise, select a
sprocket with a larger number of teeth. Refer to the details of "Selection by
Drive Performance (kilowatt ratings)" (P.120).
Avoid shock load as much as possible. Install a damper, etc., to damp the shock load.
Improper lubrication
Periodically supply the correct lubricant. Spray type chain oil "DID Chain Lube"
is recommended.
Corrosion of chain
Check the service circumstances and lubrication condition, and select a proper chain.
Wear of sprocket
Replace it with a new one. Use a sprocket conforming to the correct standard
dimensions.
Immediately remove the foreign substances, and strictly control the service circumstances.
Pay constant attention to the chain sag. Correct by adjusting it according to the
procedure stated in "Sag adjustment of roller chain" (P.131).
Check the alignment between both the large and small sprockets.
Replace chains that are elongated beyond the tolerance and worn sprockets
with new ones.
If the chain contacts the chain case, immediately correct and adjust.
Improper lubrication
When replacing the chain, use the correct chain size and sprocket sizes. Select
a chain suitable for sprocket sizes, and sprockets suitable for the chain size.
(Especially be alert when replacing HK Series multiplex chain.)
Abnormal noise
134
Correction
A chain with too much slack causes the chain to ride over a sprocket, and can
damage the tooth heads of a sprocket. Correctly adjust it.
Replace the worn sprocket with a new one. If foreign substances are deposited
on the bottoms of the teeth, immediately remove them.
Misalignment of large and small sprockets result in abnormal wear of the sides
of link plates and the sprockets, thereby shortening chain life. Apply a straight
edge to the lateral sides of sprockets to check alignment.
Adjust to a proper sag. Consider the installation of spring type idler or tensioner.
Imperfect and uneven lubrication causes uneven wear and pitch irregularity.
Immediately replace the chain, and lubricate the entire chain evenly.
Stiff link
Misalignment of sprockets
If the alignment between sprockets is incorrect, the force applied from the sides
of the sprockets opens the inner plates, which interferes with the outer plates
and cause stiff links. Align the large and small sprockets properly.
Corrosion of chain
Improper lubrication
If a chain comes in contact with foreign substances during feeding, the inner
and outer plates may be opened. Immediately remove the foreign substance.
If sand or mud enters bending sections, remove the chain, and wash and
lubricate, or replace the chain. Furthermore, install a case, etc. to prevent the
ingress of sand and mud.
Fatigue fracture
If a chain is used for a long time at a load exceeding the maximum allowable
tension, fatigue fracture of plates and bending fatigue fracture of pins occur. If
the chain life before fatigue fracture is shorter than the expected life, select a
chain with a larger maximum allowable tension. For example, if a DID50
Standard Roller Chain is used for 750 cc motor-cycles, it may be fractured in a
short time. In this case, rather than the chain being faulty, the selection was
incorrect.
If a load or impact extremely larger than the allowable tension acts on a chain,
ductile fracture of plates or fracture of pins by shear or bending occurs. This
fracture occurs when the chain size selected is incorrect and allowable tension
is too small. Re-select a proper chain.
The fracture caused when the chain rides over a sprocket is mainly caused by
wear elongation. Select an appropriate chain, and lubricate properly.
Hydrogen embrittlement
Note: See
"Fracture patterns
of respective chain
components" on
P.136.
If foreign substances interfere with or are seized by the chain during feeding,
excessive load acts on the chain, and its life will be shortened or it may break
suddenly. Make necessary arrangements for an appropriate service
circumstances, and be sure to immediately remove any foreign substances.
Rotation of pin
(see P.136)
Excessive tension
Riding of chain over sprocket
Corrosion of chain and improper lubrication
When a chain
rides over a
sprocket
Wear of plates
and sprockets
on their lateral
sides
Vibration
of chain
(whipping)
Stiff link
Fractured
chain
135
Possible cause
Maintenance
Trouble
Maintenance
Maintenance
Fracture of pins
When a pin is fractured by
excessive tension, the
(d)
fracture occurs close to the
plate, with a bulged specular
surface formed by shearing,
as shown in (d). However,
when the acting force is not
(e)
so strong, fatigue fracture
takes place after a long
period of time around the
center of the pin as shown in (e), and the fractured surface
is flat with small undulations.
Elongation of chain
In general, the elongation of chains includes the
following three types;
1. Elastic elongation by chain tension
If a load acts on a chain, the respective components of
the chain are elastically deformed, causing elongation. If
the load is removed, the original length is restored.
Fracture of bushings
As with rollers, bushings fracture by
shock. Generally, as shown in the
photo, a vertical crack occurs and
stops near the plates. One crack
can also be superimposed on
another, causing the central portion
to come off. In general, it can be
said that a larger crack is caused by
a larger tension.
136
137
Maintenance
General
Single Pitch
Double Pitch
Others
Technical
Information
139
General
Small Conveyor
Chains
General
General
Small Conveyor
Chains
Ultimate Life Chain Series and Environment Resistant Chain Series described in the previous chapter are also available
for Small Conveyor Chains, which are listed on P142-143 for reference.
[Example]
DID C2050 2P K 1 96 R T
Chain No.
Indicates that the overall
length of chain is 96 links.
Attachment
intervals
Number of holes
on attachment
Type of connecting link
R: Clip type (DID60 or DIDC2060H or smaller)
C: Cotter type (DID80 or DIDC2080H or larger)
Types of attachments
K: Bent attachments are installed on both sides
A: Bent attachments are installed on one side
SK: Straight attachments are installed on both sides
SA: Straight attachments are installed on one side
to form a loop
to form a straight shape
For connections other than those above, see P.145. For any other style, please consult us.
In case of top roller chains or side roller chains, see the corresponding pages.
140
Classification
Single pitch
Standard Conveyor Chain with Attachments
Double pitch
Single pitch
Top Roller Chain
Double pitch
Free Flow Chain
Single pitch
Side Roller Chain
Double pitch
Single pitch
Hollow Pin Chain
Double pitch
Others
Flexible Chain
Single pitch
Double pitch
141
Minor division
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Standard
Ultimate Life
Environment Resistance
Page
P144P167
P174P195
P198P203,P206
Small Conveyor
Chains
Medium division
P204P205,P207
General
Major division
P208
P209
P210
Sintered
Bushing
(UR), (URN)
O-Ring (LD)
X-Ring (LX)
DH-
(DHA)
Features
Functions
Nickel Plate
(N)
100
Temperature
Range in Use
Dirty
Environment
10
80
Temperature
Range in Use
Tensile
strength index
10
80
100
Dusty
Dirty
Environment
Tensile
strength index
100
Temperature
Range in Use
Dusty
Dirty
Environment
Tensile
strength index
10
80
100
Maintenance-Free
Maintenance-Free
Tensile
strength index
70
Temperature
Range in Use
10
60
Corrosive
Atmosphere
Moisture,
Salt Water
OK
100
Temperature
Range in Use
Alkaline
Environment
Allowable
Load
10
120
Main uses
Single Pitch
Small Conveyor
Chains
Name
Standard
Roller Chain
TEXTILE
PACK
HOME
APPLIANCE
PACK
TEXTILE PRINT
CONVEYOR
VENDING
MACHINE
CONSTRUCTION
FOOD
PACK
TEXTILE
TEXTILE
CONVEYOR
FOOD
CONVEYOR
CONSTRUCTION
FOOD
PACK
TEXTILE
CONVEYOR
HOME
APPLIANCE
CHEMICALS
PARKING
HOME
APPLIANCE
AGRICULTURE PRINT
AGRICULTURE
Standard Conveyor Chain with attachments (Single pitch): Chain No. and Codes
Chain No.
DID
DID
DID
DID
25
35
41
40
DID 50
DID 60
DID 80
DID 100
DID 120
DID
DID
DID
DID
140
160
180
200
Standard
Solid Bushing
DHA
HT
T
D
DHA
DHA
DHA
DHA
LD
LX
C**UR,URN
N
N
N
N
E
E
D
D
D
D
-
DHA
DHA
-
LX
LX
LD
LD
LD
C**UR,URN
C**UR,URN
C**UR,URN
-
N
N
N
N
N
E
E
E
E
E
LD
LD
LD
LD
N
N
-
142
Hi-Guard
(SSK)
Corrosive
Atmosphere
Moisture,
Salt Water
Moisture,
Salt Water
Alkaline
Environment
Corrosive
Atmosphere
OK
Acidic
Environment
Allowable
Load
100
Alkaline
Environment
Acidic
Environment
Clean Areas
Temperature
Range in Use
10
400
Allowable
Load
OK
100
TEXTILE
CONVEYOR
PARKING
TEXTILE
CONVEYOR
PARKING
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
FOOD
CHEMICALS
Double Guard
Moisture,
Salt Water
Corrosive
Atmospher
Atmosphere
Acidic
Moisture, Alkaline
Salt Water Environment Environment
Maintenance-Free
CONVEYOR
Allowable
Load
Allowable
Load
10
15
FOOD
CHEMICALS
WATER
TREATMENT
10
200
CONVEYOR
WATER
TREATMENT
Stainless Steel
WG
SS
SS
SS
SSK
SSLT
TK
WG
WG
WG
-
SS
SS
SS
SS
SS
SSK
SSK
SSK
SSK
SSK
SSLT
SSLT
SSLT
-
TK
TK
TK
TK
TK
SS
SS
SS
SS
TK
TK
-
143
Alkaline
Environment
Temperature
Range in Use
40
80
CONVEYOR
FOOD
Great Savings
Dusty
Dirty
Environment
Corrosive
Atmosphere
Functions
Corrosive
Atmosphere
Main uses
10
FOOD
CHEMICALS
Allowable
Load
100
PACK
CONSTRUCTION
Small Conveyor
Chains
(SS)
Single Pitch
Double Guard
(WG)
Features
Hi-Guard
(E)
Name
Standard Attachments
For "DID Small Conveyor Chains", various links are available for coupling and attaching custom devices directly to the
chains. These links are called attachments. The following standard attachments are available.
Small Conveyor
Chains
(Example)
DID 60
4P
Chain size
Attachment
intervals
Types of attachments
Single Pitch
144
Installation of a dog
with D1 attachment
DID 25
DID 35
DID 41
DID 40
DID 50
DID 60
DID 80
DID 100
DID 120
DID 140
DID 160
DID 200
DID 240
Inner
Inner
Inner
Inner
Inner
Outer
Outer
Outer
Side A
Side B
10Link
9Link
6Link
1Link 2Link
2Link
10Link
6Link
2Link
Single Pitch
Single pitch
: In stock
: Made-to-order
: Special
2Link
4Link
2Link
3Link
1Link 2Link
2Link
5Link
CJ
K1 innerPL
33LLPL
K1 innerPL
3
3LLK1 outer
RLK1 outer
25LL
145
T
W
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
146
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Tensile
strength index
100
Temperature
Range in Use
10
80
6.35
9.525
12.70
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
3.18
4.78
6.38
7.95
9.53
12.70
15.88
19.05
25.40
25.40
31.75
38.10
kN
kgf
kN
kgf
2.31
3.59
3.59
3.97
5.09
5.96
7.94
9.54
11.11
12.71
14.29
19.85
7.8
12.0
13.7
16.5
20.3
25.4
32.6
39.5
49.7
53.6
63.6
77.9
8.50
13.1
14.6
17.6
21.9
26.9
35.4
42.5
53.0
58.4
68.2
85.0
4.7
7.3
7.9
9.5
11.6
14.3
19.0
22.7
28.2
31.7
36.5
46.0
0.72
1.25
1.20
1.50
2.00
2.40
3.20
4.00
4.80
5.60
6.40
8.00
5.9
9.0
9.6
12.0
15.0
18.1
24.0
29.9
35.9
41.9
47.8
60.0
4.02
9.31
10.1
16.6
27.9
40.2
78.4
118
166
215
269
470
410
950
1,030
1,700
2,850
4,100
8,000
12,100
17,000
22,000
27,500
48,000
0.63
1.47
1.67
2.64
4.41
6.37
10.7
17.1
24.5
32.3
41.2
68.6
65
150
170
270
450
650
1,100
1,750
2,500
3,300
4,200
7,000
0.13
0.32
0.39
0.63
1.06
1.44
2.55
3.79
5.49
7.11
9.82
16.50
Pin
(3.30)
(5.08)
7.77
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
39.68
Plate
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
P
DID 25
DID 35
DID 41
DID 40
DID 50
DID 60
DID 80
DID100
DID120
DID140
DID160
DID200
6.35
9.525
12.70
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
63.50
Attachment
SA1, SK1
Common
dimensions
C1
Y1
A,SA
K,SK
7.15
9.52
11.91
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
63.50
10.7
14.4
17.5
17.6
23.0
27.0
34.9
43.3
53.2
61.9
69.9
90.0
4.76
6.35
7.14
7.92
10.31
11.91
15.88
19.84
23.01
28.58
31.75
42.87
7.94
9.52
12.30
12.70
15.88
18.26
24.61
31.75
36.53
44.45
50.80
63.50
11.50
14.70
17.50
17.50
22.60
26.20
34.05
42.75
50.30
62.40
68.10
84.50
5.56
7.94
9.53
9.53
12.70
15.88
19.05
25.40
28.58
34.92
38.10
47.60
3.4
3.5
3.5
3.5
5.2
5.2
6.8
8.7
10.3
12.3
14.3
17.0
6.00
9.52
9.52
9.52
11.91
14.27
19.05
23.83
28.58
33.32
38.10
47.62
9.2
14.6
15.4
16.8
21.0
25.7
33.9
41.9
51.4
57.8
67.4
83.4
0.0003
0.001
0.0015
0.002
0.003
0.006
0.011
0.024
0.037
0.068
0.091
0.186
0.0006
0.002
0.003
0.004
0.006
0.012
0.022
0.048
0.074
0.136
0.182
0.372
0.00002
0.0009
0.0009
0.001
0.002
0.003
0.007
0.012
0.02
0.03
0.045
0.106
Pitch
Chain No.
Unit (mm)
Approx. weight
without attachments
kg/m
Single Pitch
Pitch
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
WK,WSK
DID 40
12.700
12.70
17.6
07.92
12.70
17.5
04.5
23.0
09.5
0.003
0.006
DID 50
15.875
15.88
23.0
10.31
15.88
22.6
05.5
28.8
11.9
0.007
0.014
DID 60
19.050
19.05
27.0
11.91
18.26
26.2
06.6
34.6
14.3
0.012
0.024
DID 80
25.400
25.40
34.9
15.88
24.61
34.1
09.0
46.1
19.1
0.026
0.052
DID100
31.750
31.75
43.3
19.84
31.75
42.8
11.0
57.8
23.8
0.051
0.102
147
T
W
F
f
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
148
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Dirty
Environment
Tensile
strength index
100
Temperature
Range in Use
HOME
APPLIANCE
10
80
9.525
12.700
15.875
19.050
25.400
31.750
4.78
7.95
9.53
12.70
15.88
19.05
(5.08)
7.92
10.16
11.91
14.88
19.05
Pin
d
3.59
3.97
5.09
5.96
7.94
9.54
F
13.1
17.6
21.9
26.9
35.4
42.5
Plate
f
7.3
9.5
11.6
14.3
19.0
22.7
T
1.25
1.50
2.00
2.40
3.20
4.00
H
9.0
12.0
15.0
18.1
24.0
29.9
Dimensions of attachment
Chain No.
DID 35T
DID 40D
DID 50D
DID 60D
DID 80D
DID100D
Attachment
A1, K1
C1
Y1
9.52
12.70
15.88
19.05
25.40
31.75
14.4
17.6
23.0
27.0
34.9
43.3
6.35
7.92
10.31
11.91
15.88
19.84
9.52
12.70
15.88
18.26
24.61
31.75
14.70
17.50
22.60
26.20
34.05
42.75
7.94
9.53
12.70
15.88
19.05
25.40
3.5
3.5
5.2
5.2
6.8
8.7
9.52
9.52
11.91
14.27
19.05
23.83
A,SA
K,SK
14.6 0.001
16.8 0.002
21.0 0.003
25.7 0.006
33.9 0.011
41.9 0.024
0.002
0.004
0.006
0.012
0.022
0.048
0.0009
0.0010
0.0020
0.0030
0.0070
0.0120
Chain No.
Unit (mm)
Approx. weight
Avg. tensile strength Max. allowable load
without attachments
kg/m
kN
kgf
kN
kgf
9.31
950
1.47
150
0.32
16.60
1,700
2.64
270
0.63
27.90
2,850
4.41
450
1.06
40.20
4,100
6.37
650
1.44
78.40
8,000
10.70
1,100
2.67
118 000
12,100
17.10
1,750
3.99
Single Pitch
Pitch
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
DID 35T
09.525
WK,WSK
-
DID 40D
12.700
12.70
17.6
07.92
12.70
17.5
04.5
23.0
09.5
0.003
0.006
DID 50D
15.875
15.88
23.0
10.31
15.88
22.6
05.5
28.8
11.9
0.007
0.014
DID 60D
19.050
19.05
27.0
11.91
18.26
26.2
06.6
34.6
14.3
0.012
0.024
DID 80D
25.400
25.40
34.9
15.88
24.61
34.1
09.0
46.1
19.1
0.026
0.052
DID100D
31.750
31.75
43.3
19.84
31.75
42.8
11.0
57.7
23.8
0.051
0.102
149
T
W
Small Conveyor
Chains
H
P
CJ
OJ
2POJ
Single Pitch
RJ
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
150
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Dusty
Dirty
Environment
Temperature
Range in Use
Tensile
strength index
10
80
100
CONSTRUCTION
AGRICULTURE
6.35
9.525
12.70
12.70
15.875
19.05
3.18
4.78
6.38
7.95
9.53
12.70
(3.30)
(5.08)
7.77
7.92
10.16
11.91
Pin
d
2.31
3.59
3.59
3.97
5.09
5.96
E
7.8
12.0
13.7
16.5
20.3
25.4
Plate
F
8.5
13.1
14.6
17.6
21.9
26.9
f
4.7
7.3
7.9
9.5
11.6
14.3
T
0.72
1.25
1.20
1.50
2.00
2.40
H
5.9
9.0
9.6
12.0
15.0
18.1
Dimensions of attachment
Chain No.
C
DID 25DHA
DID 35DHA
DID 41DHA
DID 40DHA
DID 50DHA
DID 60DHA
Attachment
A1, K1
Y
7.15
9.52
11.91
12.70
15.88
19.05
C1
Y1
A,SA K,SK
0.0003 0.0006
0.0010 0.0020
0.0015 0.0030
0.0020 0.0040
0.0030 0.0060
0.0060 0.0120
0.00002
0.00090
0.00090
0.00100
0.00200
0.00300
Chain No.
Unit (mm)
Approx. weight
Avg. tensile strength Max. allowable load
without attachments
kg/m
kN
kgf
kN
kgf
4.02
410
0.63
65
0.13
9.31
950
1.47
150
0.32
10.1
1,030
1.67
170
0.39
16.6
1,700
2.64
270
0.63
27.9
2,850
4.41
450
1.06
40.2
4,100
6.37
650
1.44
Single Pitch
Pitch
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
WK,WSK
DID 25DHA
06.350
DID 35DHA
09.525
DID 41DHA
12.700
DID 40DHA
12.700
12.70
17.6
07.92
12.70
17.5
4.5
23.0
09.5
0.003
0.006
DID 50DHA
15.875
15.88
23.0
10.31
15.88
22.6
5.5
28.8
11.9
0.007
0.014
DID 60DHA
19.050
19.05
27.0
11.91
18.26
26.2
6.6
34.6
14.3
0.012
0.024
151
Chain Body
T
F
f
d
Small Conveyor
Chains
P
H
CJ / HJ
RJ / FJ
RJ/ FJ
(#60 or smaller)
Single Pitch
CJ (#100)
HJ (#80, 100)
Attachment
Attachment A1
Attachment K1
O
T
F
C
W
T
F
C1
P
Attachment D
d
L
T
W
f
D
d
B
Y1
152
C1
H
P
S
H
D
B
T
W
f
d
Attachment SK1
Y
F
Attachment SA1
Y1
Dusty
Dirty
Environment
Maintenance-Free
Temperature
Range in Use
Tensile
strength index
10
120
100
VENDING
MACHINE
CONSTRUCTION
HOME
APPLIANCE
AGRICULTURE
Rustless
DID 40LX
DID 40LXN
DID 50LX
DID 50LXN
DID 60LX
DID 60LXN
DID 80LD
DID 80LDN
DID100LD
DID100LDN
12.700
7.95
15.875
9.53
19.050 12.70
25.400 15.88
31.750 19.05
7.92
10.16
11.91
15.88
19.05
Pin
d
3.97
5.09
5.96
7.94
9.54
E
20.0
23.4
29.2
36.5
44.0
F
20.0
23.9
30.0
38.5
46.2
Plate
f
10.7
12.8
16.0
20.9
24.7
T
1.5
2.0
2.4
3.2
4.0
H
12.0
15.0
18.1
24.0
29.9
kN
kgf
18.1
1,850
30.1
3,070
42.8
4,370
72.5
7,400
107.0 11,000
Approx. weight
Max. allowable load
without attachments
kg/m
kN
kgf
3.72
380
0.67
6.86
700
1.08
9.31
950
1.62
14.7
1,500
2.83
22.5
2,300
4.07
Single Pitch
Note: The values of the Avg. tensile strength and Max. allowable load are for chain bodies (attachments aren't included).
Dimensions of attachment
Attachment
A1, K1
Chain No.
Standard
Rustless
DID 40LX
DID 40LXN
DID 50LX
DID 50LXN
DID 60LX
DID 60LXN
DID 80LD
DID 80LDN
Chain No.
Unit (mm)
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
12.70
15.88
19.05
25.40
31.75
18.8
24.1
28.4
36.6
45.1
7.92
10.31
11.91
15.88
19.84
12.70
15.88
18.26
24.61
31.75
17.50
22.60
26.20
34.05
42.75
9.53
12.70
15.88
19.05
25.40
3.5
5.2
5.2
6.8
8.7
9.5
11.9
14.3
19.1
23.8
17.9
22.1
27.2
35.4
43.6
0.002
0.003
0.006
0.011
0.024
0.004
0.006
0.012
0.022
0.048
0.001
0.002
0.003
0.007
0.012
DID100LD
DID100LDN
Note: Consult us for the use of Attachment WA, WSA, WK, and WSK for O-Ring Chains.
153
T
W
F
f
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
C Y
Attachment SA1
O
C Y
T
F
T
F
f
B
C1
S
P
T
W
f
B
Attachment SK1
Y1
C1
P
Attachment D
T
W
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
154
Y1
Maintenance-Free
Tensile
strength index
70
Temperature
Range in Use
10
60
HOME
APPLIANCE
12.70
7.95
9.53
DID C50 URN 15.875
12.70
DID C60 URN 19.05
15.88
DID C80 URN 25.40
DID C40 URN
7.92
10.16
11.91
15.88
Pin
d
3.97
5.09
5.96
7.94
E
16.5
20.3
25.4
32.5
Plate
F
f
17.6 9.5
21.9 11.6
27.1 14.3
35.4 19.0
T
1.5
2.0
2.4
3.2
H
12.0
15.0
18.1
24.0
kN
15.6
25.4
37.2
63.7
kgf
1,600
2,600
3,800
6,500
Approx. weight
Max. allowable load
without attachments
kg/m
kN
kgf
2.64
270
0.63
4.31
440
1.06
6.27
640
1.44
10.68 1,090
2.67
Single Pitch
DID C80 UR
Rustless
Unit (mm)
Dimensions of attachment
Chain No.
Standard
Rustless
DID C40 UR
DID C50 UR
DID C60 UR
DID C80 UR
Attachment
A1, K1
Pitch
Attachment
SA, SK
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
12.70
15.875
19.05
25.40
12.70
15.88
19.05
25.40
17.6
23.0
27.0
34.9
7.92
10.31
11.91
15.88
12.70
15.88
18.26
24.61
17.50
22.60
26.20
34.05
9.53
12.70
15.88
19.05
3.5
5.2
5.2
6.8
9.52
11.91
14.27
19.05
16.8
21.0
25.7
33.9
0.002
0.003
0.006
0.011
0.004
0.006
0.012
0.022
0.001
0.002
0.003
0.007
Note: 1. The values of the Avg. tensile strength and Max. allowable load are for chain bodies (attachments aren't included).
2. The alphabet C following DID indicates that the chain is for a conveyor system, and the thickness of the inner plate is the same as the outer plate.
(The thickness of the inner plate of the Bushing Roller Chain for Transmission is thicker.)
155
T
W
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
156
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Allowable
Load
100
OK
6.350
9.525
12.700
12.700
15.875
19.050
25.400
31.750
38.100
44.450
50.800
3.18
4.78
6.38
7.95
9.53
12.70
15.88
19.05
25.40
25.40
31.75
kN
kgf
kN
kgf
2.31
3.59
3.59
3.97
5.09
5.96
7.94
9.54
11.11
12.71
14.29
7.8
12.0
13.7
16.5
20.3
25.4
32.6
39.5
49.7
53.6
63.6
8.50
13.10
14.60
17.60
21.90
26.90
35.40
42.50
53.00
58.40
68.20
4.7
7.3
7.9
9.5
11.6
14.3
19.0
22.7
28.2
31.7
36.5
0.72
1.25
1.20
1.50
2.00
2.40
3.20
4.00
4.80
5.60
6.40
5.9
9.0
9.6
12.0
15.0
18.1
24.0
29.9
35.9
41.9
47.8
4.02
9.31
10.1
16.6
27.9
40.2
78.4
118.00
166.00
215.00
269.00
410
950
1,030
1,700
2,850
4,100
8,000
12,100
17,000
22,000
27,500
0.63
1.47
1.67
2.64
4.41
6.37
10.7
17.1
24.5
32.3
41.2
65
150
170
270
450
650
1,100
1,750
2,500
3,300
4,200
0.13
0.32
0.39
0.63
1.06
1.44
2.55
3.79
5.49
7.11
9.82
Pin
(3.30)
(5.08)
7.77
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
Plate
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
DID 25N
DID 35N
DID 41N
DID 40N
DID 50N
DID 60N
DID 80N
DID100N
DID120N
DID140N
DID160N
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
6.35
9.525
12.70
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
7.15
9.52
11.91
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
10.7
14.4
17.5
17.6
23.0
27.0
34.9
43.3
53.2
61.9
69.9
4.76
6.35
7.14
7.92
10.31
11.91
15.88
19.84
23.02
28.58
31.75
7.94
9.52
12.30
12.70
15.88
18.26
24.61
31.75
36.51
44.45
50.80
11.50
14.70
17.50
17.50
22.60
26.20
34.05
42.75
50.30
62.40
68.10
5.56
7.94
9.53
9.53
12.70
15.88
19.05
25.40
28.58
34.92
38.10
3.4
3.5
3.5
3.5
5.2
5.2
6.8
8.7
10.3
12.3
14.3
6.00
9.52
9.52
9.52
11.91
14.27
19.05
23.83
28.58
33.32
38.10
9.2
14.6
15.4
16.8
21.0
25.7
33.9
41.9
51.4
57.8
67.4
0.0003
0.001
0.0015
0.002
0.003
0.006
0.011
0.024
0.037
0.068
0.091
0.0006
0.002
0.003
0.004
0.006
0.012
0.022
0.048
0.074
0.136
0.182
0.00002
0.0009
0.0009
0.001
0.002
0.003
0.007
0.012
0.02
0.03
0.045
Chain No.
Unit (mm)
Approx. weight
without attachments
kg/m
Single Pitch
Pitch
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
DID 40N
12.700
12.70
17.6
07.92
12.70
17.5
04.5
23.0
09.5
0.003
WK,WSK
0.006
DID 50N
15.875
15.88
23.0
10.31
15.88
22.6
05.5
28.8
11.9
0.007
0.014
DID 60N
19.050
19.05
27.0
11.91
18.26
26.2
06.6
34.6
14.3
0.012
0.024
DID 80N
25.400
25.40
34.9
15.88
24.61
34.1
09.0
46.1
19.1
0.026
0.052
DID100N
31.750
31.75
43.3
19.84
31.75
42.8
11.0
57.8
23.8
0.051
0.102
157
T
W
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
158
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Corrosive
Atmosphere
Moisture,
Salt Water
Allowable
Load
OK
100
WATER
TREATMENT
CONSTRUCTION
OUTDOOR
9.525
12.700
15.875
19.050
25.400
31.750
38.100
4.78
7.95
9.53
12.70
15.88
19.05
25.40
Unit (mm)
Pin
(5.08)
7.92
10.16
11.91
15.88
19.05
22.23
Plate
kN
kgf
Approx. weight
without attachments
kg/m
2.15
3.72
6.86
9.31
14.7
22.5
30.4
220
380
700
950
1,500
2,300
3,100
0.32
0.63
1.06
1.44
2.55
3.79
5.49
3.59
3.97
5.09
5.96
7.94
9.54
11.11
12.0
16.5
20.3
25.4
32.6
39.5
49.7
13.1
17.6
21.9
26.9
35.4
42.5
53.0
7.3
9.5
11.6
14.3
19.0
22.8
28.2
1.25
1.50
2.00
2.40
3.20
4.00
4.80
9.0
12.0
15.0
18.1
24.0
29.9
35.9
kN
kgf
10.20
1,050
16.60
1,700
28.40
2,900
40.20
4,100
75.00
7,650
112.000 11,500
157.000 16,100
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
DID 35E
DID 40E
DID 50E
DID 60E
DID 80E
DID100E
DID120E
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
9.525
12.70
15.875
19.05
25.40
31.75
38.10
9.52
12.70
15.88
19.05
25.40
31.75
38.10
14.4
17.6
23.0
27.0
34.9
43.3
53.2
6.35
7.92
10.31
11.91
15.88
19.84
23.02
9.52
12.70
15.88
18.26
24.61
31.75
36.51
14.70
17.50
22.60
26.20
34.05
42.75
50.30
7.94
9.53
12.70
15.88
19.05
25.40
28.58
3.5
3.5
5.2
5.2
6.8
8.7
10.3
9.52
9.52
11.91
14.27
19.05
23.83
28.58
14.6
16.8
21.0
25.7
33.9
41.9
51.4
0.001
0.002
0.003
0.006
0.011
0.024
0.037
0.002
0.004
0.006
0.012
0.022
0.048
0.074
0.0009
0.001
0.002
0.003
0.007
0.012
0.02
Chain No.
Single Pitch
Pitch
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
DID 40E
12.700
12.70
17.6
07.92
12.70
17.5
4.5
23.0
09.5
0.003
WK,WSK
0.006
DID 50E
15.875
15.88
23.0
10.31
15.88
22.6
5.5
28.8
11.9
0.007
0.014
DID 60E
19.050
19.05
27.0
11.91
18.26
26.2
6.6
34.6
14.3
0.012
0.024
DID 80E
25.400
25.40
34.9
15.88
24.61
34.1
9.0
46.1
19.1
0.026
0.052
159
T
W
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
160
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Allowable
Load
100
OK
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
FOOD CHEMICALS
07.95
09.53
12.70
15.88
Pin
d
3.97
5.09
5.96
7.94
07.92
10.16
11.91
15.88
E
16.5
20.3
25.4
32.6
Plate
F
17.6
21.9
26.9
35.4
f
09.5
11.6
14.3
19.0
T
1.5
2.0
2.4
3.2
H
12.0
15.0
18.1
24.0
kN
16.6
28.4
40.2
75.0
kgf
1,700
2,900
4,100
7,650
kN
03.72
06.86
09.31
14.70
kgf
380
700
950
1,500
Approx. weight
without attachments
kg/m
0.63
1.06
1.44
2.55
Single Pitch
DID 80WG
12.700
15.875
19.050
25.400
Pitch
Chain No.
Unit (mm)
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
DID 40WG
DID 50WG
DID 60WG
DID 80WG
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
12.70
15.875
19.05
25.40
12.70
15.88
19.05
25.40
17.6
23.0
27.0
34.9
7.92
10.31
11.91
15.88
12.70
15.88
18.26
24.61
17.50
22.60
26.20
34.05
9.53
12.70
15.88
19.05
3.5
5.2
5.2
6.8
9.52
11.91
14.27
19.05
16.8
21.0
25.7
33.9
0.002
0.003
0.006
0.011
0.004
0.006
0.012
0.022
0.001
0.002
0.003
0.007
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common dimensions
C1
Y1
Bw
Pw
WA,WSA
DID 40WG
12.700
12.70
17.6
07.92
12.70
17.5
4.5
23.0
09.5
0.003
WK,WSK
0.006
DID 50WG
15.875
15.88
23.0
10.31
15.88
22.6
5.5
28.8
11.9
0.007
0.014
DID 60WG
19.050
19.05
27.0
11.91
18.26
26.2
6.6
34.6
14.3
0.012
0.024
DID 80WG
25.400
25.40
34.9
15.88
24.61
34.1
9.0
46.1
19.1
0.026
0.052
Note: The values of the Avg. tensile strength and Max. allowable load are for chain bodies (attachments aren't included).
161
T
W
Small Conveyor
Chains
h
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
162
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Corrosive
Atmosphere
Moisture,
Salt Water
Acidic
Environment
Alkaline
Environment
Temperature
Range in Use
Clean Areas
10
400
SS
SSK
Allowable
Load
Allowable
Load
10
15
WATER
TREATMENT
CHEMICALS
6.350
9.525
12.700
15.875
19.050
25.400
31.75
3.10
4.68
7.85
9.40
12.57
15.75
18.90
3.30
5.08
7.95
10.16
11.91
15.88
19.05
Unit (mm)
Pin
Plate
2.30
3.58
3.96
5.08
5.95
7.93
9.53
7.60
11.80
16.30
20.50
25.85
32.50
40.30
13.20
17.50
21.60
27.00
34.70
42.35
7.15
9.35
11.35
14.10
18.45
22.20
0.75
1.27
1.50
2.00
2.40
3.20
4.00
6.0
9.0
12.0
15.0
18.1
24.1
30.1
5.2
7.8
10.4
13.0
15.6
20.8
26.0
340
770
1,360
2,130
3,060
5,450
8,390
0.117
0.264
0.441
0.686
1.070
1.760
2.540
12
27
45
70
110
180
260
0.13
0.34
0.64
1.06
1.56
2.62
4.13
Chain No.
P
DID
40 SSK
DID
50 SSK
DID
60 SSK
DID
80 SSK
12.700
15.875
19.050
25.400
31.750
7.85
9.40
12.57
15.75
18.90
7.95
10.16
11.91
15.88
19.05
Pin
Plate
3.96
5.08
5.95
7.93
9.53
16.30
20.50
25.85
32.50
40.30
17.50
21.60
27.00
34.70
42.35
9.35
11.35
14.10
18.45
22.20
1.50
2.00
2.40
3.20
4.00
12.0
15.0
18.1
24.1
30.1
10.4
13.0
15.6
20.8
26.0
13.3
20.9
30.0
53.4
82.3
1,360
2,130
3,060
5,450
8,390
0.686
1.030
1.570
2.650
3.820
70
105
160
270
390
0.64
1.06
1.56
2.62
4.13
Dimensions of attachment
Chain No.
DID 25SS
DID 35SS
DID 40SS.SSK
DID 50SS.SSK
DID 60SS.SSK
DID 80SS.SSK
Attachment
A1, K1
Pitch
P
6.350
9.525
12.700
15.875
19.050
25.400
7.1
9.5
12.7
15.9
19.1
25.4
Attachment Common
Approx. additional weight
SA1, SK1 dimensions Attachment D
per attachmentkg
C1
Y1
A,SA K,SK
0.0006 0.0002
0.0016 0.0008
0.0040 0.0010
0.0060 0.0020
0.0140 0.0030
0.0260 0.0070
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common
dimensions
C1
Y1
Bw
Pw
WA,WSA
WK,WSK
DID 25SS
06.350
DID 35SS
09.525
DID 40SS.SSK
12.700
12.7
18.0
07.9
12.70
17.5
3.6
24.2
12.70
0.003
0.006
DID 50SS.SSK
15.875
15.9
22.9
10.3
15.90
22.6
5.2
30.2
15.88
0.007
0.014
DID 60SS.SSK
19.050
19.1
27.7
11.9
18.30
26.2
5.2
36.1
19.05
0.012
0.024
DID 80SS.SSK
25.400
25.4
35.2
15.9
24.60
34.1
6.8
48.0
25.40
0.026
0.052
163
Single Pitch
Pitch
Chain Body
T
W
F
f
d
Small Conveyor
Chains
H
P
Single Pitch
Attachment
Attachment A1
Attachment K1
O
T
F
Y
F
W
D
W
D
d
S
S
H
H
P
Attachment SA1
Attachment SK1
T
T
W
f
B
B
Y1
C1
P
Y1
Attachment D
d
L
C1
P
T
W
f
D
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
164
Corrosive
Atmosphere
Clean Areas
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Temperature
Range in Use
Dusty
Dirty
Environment
Maintenance-Free
10
200
Allowable
Load
10
P
12.700
15.875
19.050
25.400
DID40SSLT
DID50SSLT
DID60SSLT
Pin
Plate
kN
3.96
5.08
5.95
7.93
20.0
23.9
30.0
38.5
10.7
12.8
16.0
20.9
1.5
2.0
2.4
3.2
12.0
15.0
18.1
24.0
13.3
20.9
30.0
53.4
kgf
1,360
2,130
3,060
5,450
kN
kgf
0.41
0.68
1.07
1.76
45
70
110
180
Approx.
weight
kg/m
0.67
1.08
1.62
2.83
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
DID40SSLT
DID50SSLT
DID60SSLT
DID80SSLT
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
12.70
15.875
19.05
25.40
12.70
15.88
19.05
25.40
18.8
24.1
28.4
36.6
7.92
10.31
11.91
15.88
12.70
15.88
18.26
24.61
17.50
22.60
26.20
34.05
9.6
12.8
16.1
19.0
3.5
5.2
5.2
6.8
9.52
11.91
14.27
19.05
17.9
22.1
27.2
35.4
0.002
0.003
0.006
0.011
0.004
0.006
0.012
0.022
0.001
0.002
0.003
0.007
Note: The values of the Avg. tensile strength and Max. allowable load are for chain bodies (attachments aren't included).
165
Single Pitch
DID80SSLT
Unit (mm)
Chain Body
T
W
Small Conveyor
Chains
H
P
CJ
(#80 or larger)
OJ
2POJ
Single Pitch
RJ
(#60 or smaller)
Attachment
Attachment A1
B
Attachment K1
O
T
F
Attachment SA1
O
C Y
C Y
T
F
T
F
O
T
Bw
Pw
C Y
Y1
166
Bw
Pw
Y1
These figures show R connecting links (RJ), but C connecting links (CJ) are used for #80 or larger.
C1
P
Bw
Pw
S
P
T
W
T
F
Y1
Attachment D
C1
C Y
Bw
Pw
C1
T
W
Attachment SK1
C1
P
Y1
Corrosive
Atmosphere
Alkaline
Environment
Temperature
Range in Use
40
80
Allowable
Load
100
CONSTRUCTION
DID 40TK
DID 50TK
DID 60TK
DID 80TK
DID100TK
DID120TK
DID140TK
DID160TK
12.700
15.875
19.050
25.400
31.750
38.100
44.450
50.800
7.95
9.53
12.70
15.88
19.05
25.40
25.40
31.75
Plate
+80-10
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
kN
3.97
5.09
5.96
7.94
9.54
11.11
12.71
14.29
17.6
21.9
26.9
35.4
42.5
53.0
58.4
68.2
9.5
11.6
14.3
19.0
22.8
28.2
31.6
36.4
1.5
2.0
2.4
3.2
4.0
4.8
5.6
6.4
12.0
15.0
18.1
24.0
29.9
35.9
41.9
47.8
3.72
6.86
9.31
14.70
22.55
30.40
40.20
52.95
kgf
380
700
950
1,500
2,300
3,100
4,100
5,400
-11-30
kN
2.54
4.80
6.47
10.29
15.78
21.28
28.14
37.06
-31-40
kgf
260
490
660
1,050
1,610
2,170
2,870
3,780
kN
2.15
3.92
5.39
8.53
13.04
17.55
23.24
30.69
kgf
220
400
550
870
1,330
1,790
2,370
3,130
Approx. weight
without attachments
kg/m
0.63
1.06
1.44
2.55
3.79
5.49
7.11
9.82
Dimensions of attachment
Attachment
A1, K1
Pitch
Chain No.
DID 40TK
DID 50TK
DID 60TK
DID 80TK
DID100TK
DID120TK
DID140TK
DID160TK
Attachment
SA1, SK1
Common
dimensions
Attachment D
C1
Y1
A,SA
K,SK
12.70
15.875
19.05
25.40
31.75
38.10
44.45
50.80
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
17.6
23.0
27.0
34.9
43.3
53.2
61.9
69.9
7.92
10.31
11.91
15.88
19.84
23.02
28.58
31.75
12.70
15.88
18.26
24.61
31.75
36.51
44.45
50.80
17.50
22.60
26.20
34.05
42.75
50.30
62.40
68.10
9.53
12.70
15.88
19.05
25.40
28.58
34.92
38.10
3.5
5.2
5.2
6.8
8.7
10.3
12.3
14.3
9.52
11.91
14.27
19.05
23.83
28.58
33.32
38.10
16.8
21.0
25.7
33.9
41.9
51.4
57.8
67.4
0.002
0.003
0.006
0.011
0.024
0.037
0.068
0.091
0.004
0.006
0.012
0.022
0.048
0.074
0.136
0.182
0.001
0.002
0.003
0.007
0.012
0.020
0.030
0.045
Pin
Single Pitch
Pitch
Chain No.
Unit (mm)
Attachment
WA1, WA2, WK1, WK2
Attachment
WSA1, WSA2, WSK1, WSK2
Common
dimensions
C1
Y1
Bw
Pw
WA,WSA
WK,WSK
DID 40TK
12.700
12.70
17.6
07.92
12.70
17.5
04.5
23.0
09.5
0.003
0.006
DID 50TK
15.875
15.88
23.0
10.31
15.88
22.6
05.5
28.8
11.9
0.007
0.014
DID 60TK
19.050
19.05
27.0
11.91
18.26
26.2
06.6
34.6
14.3
0.012
0.024
DID 80TK
25.400
25.40
34.9
15.88
24.61
34.1
09.0
46.1
19.1
0.026
0.052
DID100TK
31.750
31.75
43.3
19.84
31.75
42.8
11.0
57.8
23.8
0.051
0.102
Note: The values of the Avg. tensile strength and Max. allowable load are for chain bodies (attachments aren't included).
167
O-Ring(LD)
X-Ring(LX)
DH-
(DHA)
Features
Functions
Sintered Bushing
Roller Chain
(UR), (URN)
Nickel Plate
(N)
100
Temperature
Range in Use
Dirty
Environment
10
80
Tensile
strength index
100
Temperature
Range in Use
10
80
Dusty
Dirty
Environment
Tensile
strength index
100
Temperature
Range in Use
Dusty
Dirty
Environment
Tensile
strength index
10
80
100
Maintenance-Free
Maintenance-Free
Tensile
strength index
70
Temperature
Range in Use
10
60
Corrosive
Atmosphere
Moisture,
Salt Water
OK
100
Temperature
Range in Use
Alkaline
Environment
Allowable
Load
10
120
LX -10C ~ -120C,
LD -10C ~ -80C,
Main uses
Double Pitch
Small Conveyor
Chains
Name
Standard
Roller Chain
TEXTILE
PACK
HOME
APPLIANCE
PACK
TEXTILE PRINT
CONVEYOR
VENDING
MACHINE
CONSTRUCTION
FOOD
PACK
TEXTILE
TEXTILE
CONVEYOR
FOOD
CONVEYOR
CONSTRUCTION
FOOD
PACK
TEXTILE
CONVEYOR
HOME
APPLIANCE
CHEMICALS
PARKING
HOME
APPLIANCE
AGRICULTURE PRINT
AGRICULTURE
Conveyor Chain with Standard Attachments Series (Double Pitch): Chain No. and Codes
Chain No.
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
C2040
C2042
C2050
C2052
C2060H
C2062H
C2080H
C2082H
C2100H
C2102H
C2120H
C2122H
C2160H
C2162H
Standard
Solid Bushing
DHA
D
D
D
D
D
D
D
D
D
D
D
D
D
D
DHA
DHA
DHA
DHA
DHA
DHA
-
168
UR,URN
UR,URN
UR,URN
UR,URN
UR,URN
UR,URN
UR,URN
UR,URN
-
N
N
N
N
N
N
N
N
N
N
N
N
N
N
WG
WG
WG
WG
WG
WG
WG
WG
-
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Corrosive
Atmosphere
Allowable
Load
Allowable
Load
100
100
Moisture,
Salt Water
Corrosive
Atmosphere
OK
Acidic
Environment
OK
TEXTILE
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Clean Areas
Temperature
Range in Use
10
400
Corrosive
Atmospher
Atmosphere
Acidic
Moisture, Alkaline
Salt Water Environment Environment
CONVEYOR
PARKING
TEXTILE
CONVEYOR
PARKING
OUTDOOR
CONSTRUCTION
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
FOOD
CONVEYOR
Allowable
Load
10
15
FOOD
CHEMICALS
WATER
TREATMENT
10
200
CONVEYOR
WATER
TREATMENT
CHEMICALS
Hi-Guard
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Stainless Steel
SS
SS
SS
SS
SS
SS
-
Maintenance-Free
Allowable
Load
2
WATER
TREATMENT
Great Savings
Dusty
Dirty
Environment
SSK
SSK
SSK
SSK
SSK
SSK
-
169
10
FOOD
CHEMICALS
Double Pitch
(SSK)
Features
(SS)
Functions
Stainless Steel
X-Ring Chain
(SSLT)
Hi-Guard Chain
(E)
Main uses
Double Guard
Chain
(WG)
Name
Small Conveyor
Chains
In general, conveyor chains are operated for longer distances and at lower speeds than transmission chains.
Accordingly, even though the pins, bushings and rollers are left unchanged, and the plate pitch is doubled to reduce the
number of sprocket teeth engaged with the chain to half, the wear of pins, bushings and rollers is small since the chain
speed is low. DID Double Pitch Chains, conform to ANSI standard and "Ultimate Life Chain Series" and "Environment
Resistant Chain Series", as are single pitch chains are also available. For information for sprokets, see "Sprockets for
double pitch chains" on P.172.
Roller R
Double Pitch
Roller S
This figure shows C connecting links (CJ), but R connecting links (RJ) are used for DID 2060 or smaller.
This figure shows a C connecting link (CJ) but R connecting links (RJ) are used for DID 2060 or smaller.
Chain No.
Roller material
DID C20420
DID C20520
DID C2062H
Resin
(polyacetal)
DID C2082H
170
Weight
(kgm)
0.44
045
0.19
20
0.51
0.68
070
0.29
30
0.85
1.03
105
0.49
50
1.46
1.76
180
0.88
90
2.58
Allowable
operational
temperature
10
80
[Type indication]
Indicates that the thickness of plates is larger
by one size, that is, equal to the thickness of
the plates of DID100. If there is no symbol, the
thickness is equal to the thickness of the
plates of DID80.
DID C 2 082 H
082 indicates that the base is DID80, and that
rollers with a large outer diameter (Roller R) are
used. In the case of regular rollers, 080 is stated
here.
Indicates that the chain is a double pitch chain.
Indicates that the chain is for a conveyor system.
Indication that the chain is a DAIDO product.
171
Double Pitch
Connecting links
Small Conveyor
Chains
Number of teeth of
double pitch
sprocket
9 or less
Double Pitch
9.5 to 14
(Example)
For DIDC2050 chain
Recommended sprocket
If a sprocket with 13
operating teeth is
necessary, adopt a
DID50 hob for 26
teeth or preferably
27 teeth.
From the table at the
bottom left on P.173,
Dp4.178631.75
132.67
(since 26 teeth mean
13 operating teeth), or
PCD4.336231.75
137.67
(since 27 teeth mean
13.5 operating teeth).
(In the above formulas,
31.75 is the chain pitch
of DIDC2050.)
15 or more
(Example)
172
Roller S
Size
Roller R
Unit (mm)
Pitch circle Outer Tooth Transverse Shaft bore dia.d Hub Approx.
No. of Operating
dia.
dia. thickness pitch P Max Dia. Length weight Material
teeth teeth
Dp Do T
E dia. dia. DH L kg
Size
Unit (mm)
Pitch circle Outer Tooth Transverse Shaft bore dia.d Hub Approx.
No. of Operating
dia.
dia. thickness pitch P Max Dia. Length weight Material
teeth teeth
Dp Do T
E dia. dia. DH L kg
DID C2040
19
9 1/2
78.23
84
10
10
82.20
93
DID C2050
19
9 1/2
97.78
105
11
11
90.16
102
19
9 1/2 117.34
12
12
98.14
108
13
13
106.14
118
14
14
114.15
127
15
15
122.17
135
16
16
130.20
143
21 10 1/2 129.26
23 11 1/2 141.22
25 12 1/2 153.20
DID C2080H
19
9 1/2 156.45
17
17
138.23
151
DID C2100H
19
9 1/2 195.58
18
18
146.27
159
19
19
154.32
167
20
20
162.37
176
10
10
102.75
116
11
11
112.70
127
12
12
122.67
138
13
13
132.67
148
14
14
142.68
158
15
15
152.71
168
16
16
162.74
179
17
17
172.79
189
18
18
182.84
199
19
19
192.90
209
20
20
202.96
220
10
10
123.30
11
11
135.24
12
12
147.21
13
13
159.20
14
14
171.22
15
15
183.25
16
16
195.29
17
17
207.35
18
18
219.41
19
19
231.48
20
20
243.55
11
11
180.31
DID C2060H
S35C
DID C2042
DID C2052
Operating teeth Coefficient of pitch circle dia. Operating teeth Coefficient of pitch circle dia.
Kp
Kp
Z
Z
5
1.7013
11
3.5495
5 1/2
1.8497
11 1/2
3.7065
2.0000
12
3.8637
6 1/2
2.1518
12 1/2
4.0211
2.3048
13
4.1786
7 1/2
2.4586
13 1/2
4.3362
2.6131
14
4.4940
8 1/2
2.7682
14 1/2
4.6518
2.9238
9 1/2
3.0798
10
3.2361
10 1/2
3.3926
DID C2062H
DID C2082H
173
Double Pitch
Transverse pitch
Standard Attachments
For DID Small Conveyor Chain, various links are available for coupling and attaching custom devices directly to the
chains. These links are called attachments. The following standard attachments are available.
Small Conveyor
Chains
Number of holes
Chain size
Attachment
intervals
Types of attachments
Double Pitch
Above figure shows D1 (an extended pin set on every two links)
Installation of a dog
with Attachment SK1
Installation of a pin
with Attachment K1
Installation of a bucket
with Attachment K1
Installation of a bucket
with Attachment K1
174
Installation of a dog
with Attachment D1
DID C2040
DID C2050
DID C2060H
DID C2080H
DID C2100H
DID C2120H
DID C2160H
DID C2042
DID C2052
DID C2062H
DID C2082H
DID C2102H
DID C2122H
DID C2162H
Roller R
Double pitch
Roller S
One-side bent
A1
A2
Double Pitch
: Stock product
: Made-to-order
Inner
Inner
Inner
Inner
Inner
Outer
Outer
Outer
Side A
Side B
10Link
9Link
6Link
1Link 2Link
2Link
10Link
6Link
2Link
2Link
4Link
2Link
3Link
1Link 2Link
2Link
5Link
CJ
K1 innerPL
33LLPL
K1 innerPL
3
3LLK1 outer
RLK1 outer
25LL
Consult us for other styles not mentioned here.
Note: When attaching attachments to every even-number link, they are
attached to outer links, unless specified.
175
Chain Body
Roller S
Roller R
T
f
d
Double Pitch
Small Conveyor
Chains
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
C1
S
P
T
S
T
W
O1
SK
Y
F
SA
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
176
Plate
kN
kgf
DID C2040
025.40
17.6
9.5
1.5
11.7
17.0
1,740
DID C2042
DID C2050
031.75
21.9
11.6
2.0
15.1
28.7
2,930
DID C2052
DID C2060H
038.10
30.1
16.1
3.2
17.2
40.2
4,100
DID C2062H
DID C2080H
050.80
38.7
20.6
4.0
23.3
68.6
7,000
DID C2082H
DID C2100H
063.50
45.8
24.4
4.8
28.8
112.0
11,500
DID C2102H
DID C2120H
076.20
56.5
29.9
5.6
33.8
156.0
16,000
DID C2122H
DID C2160H
101.60
71.6
38.2
7.1
47.4
259.0
26,500
DID C2162H
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
kN
kgf
2.64
270
4.41
450
6.47
660
11.20
1,150
18.60
1,900
25.50
2,600
42.10
4,300
Approx. weight
without attachments
kg/m
0.49
0.86
0.84
1.32
1.45
2.17
2.46
3.53
3.60
5.81
5.09
8.09
8.91
13.60
Dimensions of attachment
Chain No.
Attachment
Pitch
S
Y1
C1
C2
O1
DID C2040
25.40
9.13 12.70 19.4
19.8
11.11 13.50
9.53 19.1
3.5
5.2
1.5
DID C2042
DID C2050
31.75 11.11 15.88 24.4
24.6
14.29 15.88 11.91 23.8
5.2
6.8
2.0
DID C2052
DID C2060H
38.10 14.68 21.43 33.3
30.6
17.46 19.05 14.29 28.6
5.2
8.7
3.2
DID C2062H
DID C2080H
50.80 19.05 27.78 40.8
40.5
22.23 25.40 19.05 38.1
6.8
10.3
4.0
DID C2082H
DID C2100H
63.50 23.42 33.34 51.6
50.4
28.58 31.75 23.81 47.6
8.7
14.3
4.8
DID C2102H
DID C2120H
76.20 27.78 39.69 62.9
59.9
33.34 37.31 28.58 57.1
10.3
16.0
5.6
DID C2122H
DID C2160H
101.60 36.51 52.39 79.0
78.6
44.45 50.80 38.10 76.2
14.3
22.0
7.1
DID C2162H
Note: Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
177
A,SA
K,SK
0.003
0.006
0.006
0.012
0.016
0.032
0.034
0.068
0.064
0.128
0.108
0.216
0.246
0.492
Pitch
Pin
Double Pitch
Chain No.
Unit (mm)
Roller S
Roller R
T
f
d
Double Pitch
Small Conveyor
Chains
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
C1
S
P
T
S
T
W
O1
SK
Y
F
SA
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
178
Dirty
Environment
Tensile
strength index
100
Temperature
Range in Use
10
80
HOME
APPLIANCE
P
025.40
031.75
038.10
050.80
063.50
076.20
101.60
Unit (mm)
Pin
Plate
kN
kgf
kN
kgf
17.6
9.5
1.5
11.7
17.0
1,740
2.64
270
21.9
11.6
2.0
15.1
28.7
2,930
4.41
450
30.1
16.1
3.2
17.2
40.2
4,100
6.47
660
38.7
20.6
4.0
23.3
68.6
7,000
11.20
1,150
45.8
24.4
4.8
28.8
112.0
11,500
18.60
1,900
56.5
29.9
5.6
33.8
156.0
16,000
25.50
2,600
71.6
38.2
7.1
47.4
259.0
26,500
42.10
4,300
Approx. weight
without attachments
kg/m
0.49
0.86
0.84
1.32
1.45
2.17
2.46
3.53
3.60
5.81
5.09
8.09
8.91
13.60
Double Pitch
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Dimensions of attachment
Pitch
Attachment
Chain No.
DIDC2040D
DIDC2042D
DIDC2050D
DIDC2052D
DIDC2060HD
DIDC2062HD
DIDC2080HD
DIDC2082HD
DIDC2100HD
DIDC2102HD
DIDC2120HD
DIDC2122HD
DIDC2160HD
Y1
C1
C2
O1
A,SA
K,SK
25.40
9.13
12.70
19.4
19.8
11.11
13.50
9.53
19.1
3.5
5.2
1.5
0.003
0.006
31.75
11.11
15.88
24.4
24.6
14.29
15.88
11.91
23.8
5.2
6.8
2.0
0.006
0.012
38.10
14.68
21.43
33.3
30.6
17.46
19.05
14.29
28.6
5.2
8.7
3.2
0.016
0.032
50.80
19.05
27.78
40.8
40.5
22.23
25.40
19.05
38.1
6.8
10.3
4.0
0.034
0.068
63.50
23.42
33.34
51.6
50.4
28.58
31.75
23.81
47.6
8.7
14.3
4.8
0.064
0.128
76.20
27.78
39.69
62.9
59.9
33.34
37.31
28.58
57.1
10.3
16.0
5.6
0.108
0.216
101.60
36.51
52.39
79.0
78.6
44.45
50.80
38.10
76.2
14.3
22.0
7.1
0.246
0.492
DIDC2162HD
Note: Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
179
Pitch
Chain Body
Roller R
Double Pitch
Small Conveyor
Chains
Roller S
Attachment
A
SA
180
SK
Dusty
Dirty
Environment
Tensile
strength index
100
Temperature
Range in Use
10
80
CONSTRUCTION
AGRICULTURE
P
25.40
31.75
38.10
Unit (mm)
Pin
Plate
kN
kgf
kN
kgf
17.6
9.5
1.5
11.7
17.0
1,740
2.64
270
21.9
11.6
2.0
15.1
28.7
2,930
4.41
450
30.1
16.1
3.2
17.2
40.2
4,100
6.47
660
Approx. weight
without attachments
kg/m
0.49
0.86
0.84
1.32
1.45
2.17
Double Pitch
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Dimensions of attachment
Pitch
Attachment
Chain No.
DIDC2040DHA
DIDC2042DHA
DIDC2050DHA
DIDC2052DHA
DIDC2060HDHA
Pitch
Y1
C1
C2
O1
A,SA
K,SK
25.40
9.13
12.70
19.4
19.8
11.11
13.50
9.53
19.1
3.5
5.2
1.5
0.003
0.006
31.75
11.11
15.88
24.4
24.6
14.29
15.88
11.91
23.8
5.2
6.8
2.0
0.006
0.012
38.10
14.68
21.43
33.3
30.6
17.46
19.05
14.29
28.6
5.2
8.7
3.2
0.016
0.032
DIDC2062HDHA
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
181
Chain Body
Roller R
Double Pitch
Small Conveyor
Chains
Roller S
Attachment
A
O
K
B
SA
B
SK
F
f
T
F
WC Y
F
f
W
O1
O1
T
S
C1
182
Y1
C2
C1
Y1
C2
Dusty
Dirty
Environment
Maintenance-Free
Tensile
strength index
100
Temperature
Range in Use
10
120
VENDING
MACHINE
CONSTRUCTION
HOME
APPLIANCE
AGRICULTURE
Rustless
DIDC2040LX
DIDC2040LXN
DIDC2042LX
DIDC2042LXN
DIDC2050LX
DIDC2050LXN
DIDC2052LX
DIDC2052LXN
DIDC2060HLX
DIDC2060HLXN
25.40
7.95
31.75
9.53
38.10
12.70
7.92
15.88
10.16
19.05
11.91
22.23
Pin
Plate
kN
kgf
3.97
20.0
10.7
1.5
11.7
16.18
1,650
5.09
23.9
12.8
2.0
15.1
27.45
2,800
5.96
33.5
17.9
3.2
17.2
38.24
3,900
Double Pitch
DIDC2062HLX DIDC2062HLXN
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Approx. weight
Max. allowable load
without attachments
kg/m
kN
kgf
0.52
2.64
270
0.89
0.87
4.41
450
1.35
1.46
6.47
660
2.18
Dimensions of attachment
Chain No.
Standard
Rustless
DIDC2040LX
DIDC2040LXN
DIDC2042LX
DIDC2042LXN
DIDC2050LX
DIDC2050LXN
DIDC2052LX
DIDC2052LXN
DIDC2060HLX
DIDC2060HLXN
DIDC2062HLX
DIDC2062HLXN
Attachment
A, K
Pitch
Chain No.
Unit (mm)
Attachment
SA, SK
Common
dimensions
Y1
C1
C2
O1
A,SA
K,SK
25.40
12.70
20.6
9.13
19.8
11.11
13.50
5.2
19.1
9.53
3.5
0.003
0.006
31.75
15.88
25.6
11.11
24.6
14.29
15.88
6.8
23.8
11.91
5.2
0.006
0.012
38.10
21.43
34.7
14.68
30.6
17.46
19.05
8.7
28.6
14.29
5.2
0.016
0.032
183
Chain Body
Roller S
Roller R
T
f
d
Double Pitch
Small Conveyor
Chains
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
C1
S
P
T
S
T
W
O1
SK
Y
F
SA
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
184
Maintenance-Free
Tensile
strength index
70
Temperature
Range in Use
10
60
HOME
APPLIANCE
DIDC2042UR
DIDC2042URN
DIDC2050UR
DIDC2050URN
DIDC2052UR
DIDC2052URN
DIDC2060HUR
DIDC2060HURN
DIDC2062HUR
DIDC2062HURN
DIDC2080HUR
DIDC2080HURN
DIDC2082HUR
DIDC2082HURN
25.40
7.95
31.75
9.53
38.10
12.70
50.80
15.88
7.92
15.88
10.16
19.05
11.91
22.23
15.88
25.58
Plate
kN
kgf
3.97
17.6
9.5
1.5
11.7
15.69
1,600
5.09
21.9
11.6
2.0
15.1
25.49
2,600
5.96
30.1
17.0
3.2
17.2
37.26
3,800
7.94
38.7
20.6
4.0
23.3
63.74
6,500
Dimensions of attachment
Chain No.
Standard
Rustless
DIDC2040UR
DIDC2040URN
DIDC2042UR
DIDC2042URN
DIDC2050UR
DIDC2050URN
DIDC2052UR
DIDC2052URN
DIDC2060HUR
DIDC2060HURN
DIDC2062HUR
DIDC2062HURN
DIDC2080HUR
DIDC2080HURN
DIDC2082HUR
DIDC2082HURN
Attachment
A, K
Pitch
Standard
DIDC2040UR
Pin
Approx. weight
Max. allowable load
without attachments
kg/m
kN
kgf
0.49
2.64
270
0.86
0.84
4.31
440
1.32
1.45
6.27
640
2.17
2.46
10.68 1,090
3.53
Double Pitch
Chain No.
Unit (mm)
Attachment
SA, SK
Common
dimensions
Y1
C1
C2
O1
A,SA
K,SK
25.40
12.70
19.4
9.13
19.8
11.11
13.50
5.2
19.1
9.53
3.5
0.003
0.006
31.75
15.88
24.4
11.11
24.6
14.29
15.88
6.8
23.8
11.91
5.2
0.006
0.012
38.10
21.43
33.3
14.68
30.6
17.46
19.05
8.7
28.6
14.29
5.2
0.016
0.032
50.80
27.78
40.8
19.05
40.5
22.23
25.40
10.3
38.1
19.05
6.8
0.034
0.068
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
185
Roller S
Roller R
T
f
d
Double Pitch
Small Conveyor
Chains
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
C1
S
P
T
S
T
W
O1
SK
Y
F
SA
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
186
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Allowable
Load
OK
100
Pin
Plate
kN
kgf
kN
kgf
2.64
270
4.41
450
6.47
660
11.20
1,150
18.60
1,900
25.50
2,600
42.10
4,300
Double Pitch
DID C2040N
025.40
17.6
9.5
1.5
11.7
17.0
1,740
DID C2042N
DID C2050N
031.75
21.9
11.6
2.0
15.1
28.7
2,930
DID C2052N
DID C2060HN
038.10
30.1
16.1
3.2
17.2
40.2
4,100
DID C2062HN
DID C2080HN
050.80
38.7
20.6
4.0
23.3
68.6
7,000
DID C2082HN
DID C2100HN
063.50
45.8
24.4
4.8
28.8
112.0
11,500
DID C2102HN
DID C2120HN
076.20
56.5
29.9
5.6
33.8
156.0
16,000
DID C2122HN
DID C2160HN
101.60
71.6
38.2
7.1
47.4
259.0
26,500
DID C2162HN
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Approx. weight
without attachments
kg/m
0.49
0.86
0.84
1.32
1.45
2.17
2.46
3.53
3.60
5.81
5.09
8.09
8.91
13.60
Chain No.
Unit (mm)
Dimensions of attachment
Chain No.
Attachment
Pitch
A,SA
K,SK
DID C2040N
25.40
9.13 12.70 19.4
19.8
11.11 13.50
9.53 19.1
3.5
5.2
1.5
0.003
DID C2042N
DID C2050N
31.75 11.11 15.88 24.4
24.6
14.29 15.88 11.91 23.8
5.2
6.8
2.0
0.006
DID C2052N
DID C2060HN
38.10 14.68 21.43 33.3
30.6
17.46 19.05 14.29 28.6
5.2
8.7
3.2
0.016
DID C2062HN
DID C2080HN
50.80 19.05 27.78 40.8
40.5
22.23 25.40 19.05 38.1
6.8
10.3
4.0
0.034
DID C2082HN
DID C2100HN
63.50 23.42 33.34 51.6
50.4
28.58 31.75 23.81 47.6
8.7
14.3
4.8
0.064
DID C2102HN
DID C2120HN
76.20 27.78 39.69 62.9
59.9
33.34 37.31 28.58 57.1
10.3
16.0
5.6
0.108
DID C2122HN
DID C2160HN
101.60 36.51 52.39 79.0
78.6
44.45 50.80 38.10 76.2
14.3
22.0
7.1
0.246
DID C2162HN
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
0.006
Y1
C1
C2
187
O1
0.012
0.032
0.068
0.128
0.216
0.492
Roller S
Roller R
T
Small Conveyor
Chains
Double Pitch
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
S
P
T
S
T
W
O1
SK
Y
F
SA
C1
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
188
Corrosive
Atmosphere
Moisture,
Salt Water
Allowable
Load
OK
100
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
Pin
Plate
kN
kgf
kN
kgf
2.64
270
4.41
450
6.47
660
11.20
1,150
18.60
1,900
25.50
2,600
42.10
4,300
Double Pitch
DID C2040E
25.40
17.6
9.5
1.5
11.7
17.0
1,740
DID C2042E
DID C2050E
31.75
21.9
11.6
2.0
15.1
28.7
2,930
DID C2052E
DID C2060HE
38.10
30.1
16.1
3.2
17.2
40.2
4,100
DID C2062HE
DID C2080HE
50.80
38.7
20.6
4.0
23.3
68.6
7,000
DID C2082HE
DID C2100HE
63.50
45.8
24.4
4.8
28.8
112.0
11,500
DID C2102HE
DID C2120HE
76.20
56.5
29.9
5.6
33.8
156.0
16,000
DID C2122HE
DID C2160HE
101.60
71.6
38.2
7.1
47.4
259.0
26,500
DID C2162HE
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Approx. weight
without attachments
kg/m
0.49
0.86
0.84
1.32
1.45
2.17
2.46
3.53
3.60
5.81
5.09
8.09
8.91
13.60
Chain No.
Unit (mm)
Dimensions of attachment
Chain No.
Attachment
Pitch
A,SA
K,SK
DID C2040E
25.40
9.13 12.70 19.4
19.8
11.11 13.50
9.53 19.1
3.5
5.2
1.5
0.003
DID C2042E
DID C2050E
31.75 11.11 15.88 24.4
24.6
14.29 15.88 11.91 23.8
5.2
6.8
2.0
0.006
DID C2052E
DID C2060HE
38.10 14.68 21.43 33.3
30.6
17.46 19.05 14.29 28.6
5.2
8.7
3.2
0.016
DID C2062HE
DID C2080HE
50.80 19.05 27.78 40.8
40.5
22.23 25.40 19.05 38.1
6.8
10.3
4.0
0.034
DID C2082HE
DID C2100HE
63.50 23.42 33.34 51.6
50.4
28.58 31.75 23.81 47.6
8.7
14.3
4.8
0.064
DID C2102HE
DID C2120HE
76.20 27.78 39.69 62.9
59.9
33.34 37.31 28.58 57.1
10.3
16.0
5.6
0.108
DID C2122HE
DID C2160HE
101.60 36.51 52.39 79.0
78.6
44.45 50.80 38.10 76.2
14.3
22.0
7.1
0.246
DID C2162HE
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
0.006
Y1
C1
C2
189
O1
0.012
0.032
0.068
0.128
0.216
0.492
General
Roller S
Roller R
T
Small Conveyor
Chains
Double Pitch
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
S
P
T
S
T
W
O1
SK
Y
F
SA
C1
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
190
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Allowable
Load
OK
100
WATER
TREATMENT
OUTDOOR
CONSTRUCTION
FOOD CHEMICALS
Unit (mm)
Pin
d
Plate
f
kN
kgf
kN
kgf
2.64
270
4.41
450
6.47
660
11.2
1,150
0.49
0.86
0.84
1.32
1.45
2.17
2.46
3.53
Double Pitch
DID C2040WG
7.92
25.40
7.95
3.97
17.6
09.5
1.5
11.7
17.0
1,740
DID C2042WG
15.88
DID C2050WG
10.16
31.75
9.53
5.09
21.9
11.6
2.0
15.1
28.7
2,930
DID C2052WG
19.05
DID C2060HWG
11.91
38.10
12.70
5.96
30.1
16.1
3.2
17.2
40.2
4,100
DID C2062HWG
22.23
DID C2080HWG
15.88
50.80
15.88
7.94
38.7
20.6
4.0
23.3
68.6
7,000
DID C2082HWG
28.58
Note: 1. The values of the Avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
2. Consult us for the sizes other than the above.
Approx. weight
without attachments
kg/m
Chain No.
Dimensions of attachment
Chain No.
Pitch
P
Attachment A, K
C
Attachment SA, SK
Y1
C1
C2
Common dimensions
O1
DID C2040WG
25.40
12.70
19.4
9.13
19.8
11.11
13.50
5.2
19.1
9.53
3.5
0.003
DID C2042WG
DID C2050WG
31.75
15.88
24.4
11.11
24.6
14.29
15.88
6.8
23.8
11.91
5.2
0.006
DID C2052WG
DID C2060HWG
38.10
21.43
33.3
14.68
30.6
17.46
19.05
8.7
28.6
14.29
5.2
0.016
DID C2062HWG
DID C2080HWG
50.80
27.78
40.8
19.05
40.5
22.23
25.40
10.3
38.1
19.05
6.8
0.034
DID C2082HWG
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
191
K,SK
0.006
0.012
0.032
0.068
Roller S
Roller R
T
Small Conveyor
Chains
Double Pitch
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080 or larger.
Attachment
A
O
K
B
K
B
K
T
F
W C
B
K
O1
B
K
Y1
S
P
T
S
T
W
O1
SK
Y
F
SA
C1
C2
Y1
C1
C2
This figure shows C connecting links (CJ) but R connecting links (RJ) are used for #2060 or smaller.
192
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Clean Areas
Temperature
Range in Use
20
400
SS
SSK
Allowable
Load
Allowable
Load
10
15
WATER
TREATMENT
Unit (mm)
Pin
d
Plate
f
kN
SS
kgf
SSK
kN
kgf
0.69
70
1.03
105
1.57
160
2.65
270
3.82
390
0.50
0.82
0.84
1.27
1.44
2.14
2.47
3.59
3.79
6.15
Double Pitch
DID C2040SS,SSK
7.95
25.40
7.85
3.96 17.7
9.55
1.5
11.7
0.44
45
DID C2042SS,SSK
15.88
DID C2050SS,SSK
10.16
31.75
9.40
5.08 22.0
11.75
2.0
14.9
0.69
70
DID C2052SS,SSK
19.05
DID C2060HSS,SSK
11.91
38.10
12.57
5.95 31.5
16.85
3.2
17.0
1.03
105
DID C2062HSS,SSK
22.23
DID C2080HSS,SSK
15.88
50.80
15.75
7.93 38.0
20.10
4.0
23.0
1.77
180
DID C2082HSS,SSK
28.58
DID C2100HSS,SSK
19.05
63.50
18.90
9.53 45.6
23.85
4.8
28.8
2.55
260
DID C2102HSS,SSK
39.68
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Approx. weight
without attachments
kg/m
Chain No.
Dimensions of attachment
Chain No.
Pitch
P
Attachment A, K
Y
Attachment SA, SK
Y1
C1
C2
Common dimensions
O1
DID C2040SS,SSK
25.40
19.0
9.1
12.70
19.8
11.1
13.5
5.2
19.3
9.53
3.6
0.003
DID C2042SS,SSK
DID C2050SS,SSK
31.75
24.1
11.1
15.88
24.6
14.3
15.9
6.8
24.0
11.91
5.2
0.006
DID C2052SS,SSK
DID C2060HSS,SSK
38.10
31.4
14.7
21.43
30.6
17.5
19.1
8.7
28.8
14.30
5.2
0.017
DID C2062HSS,SSK
DID C2080HSS,SSK
50.80
41.7
19.1
27.78
41.4
22.2
25.4
10.3
38.1
19.05
6.8
0.037
DID C2082HSS,SSK
DID C2100HSS,SSK
63.50
52.2
23.8
33.34
53.4
28.6
31.8
14.3
47.6
23.81
8.7
0.067
DID C2102HSS,SSK
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
193
K,SK
0.006
0.012
0.034
0.074
0.134
Chain Body
Roller S
T
W
F
f
Small Conveyor
Chains
Double Pitch
Use R connecting links (RJ) for #2060 or smaller and C connecting links (CJ) for #2080.
Attachment
A
O
K
B
SA
B
SK
F
f
T
F
WC Y
F
f
W
O1
O1
T
S
C1
Y1
C2
This figure shows R connecting links (RJ) but C connecting links (CJ) are used for #2080.
194
C1
Y1
C2
Corrosive
Atmosphere
Clean Areas
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
Dusty
Dirty
Environment
Maintenance-Free
Temperature
Range in Use
Allowable
Load
10
200
Great Savings
10
Unit (mm)
kN
kgf
kN
kgf
Approx. weight
without attachments
kg/m
DID C2040SSLT
25.40
7.95
7.92
3.96
20.0
10.7
1.5
11.7
13.3
1,360
0.4
45
0.50
DID C2050SSLT
31.75
9.53
10.16
5.08
23.9
12.8
2.0
14.9
20.8
2,130
0.6
70
0.86
DID C2060HSSLT
38.10
12.70
11.91
5.95
33.0
17.6
3.2
17.0
31.0
3,170
1.0
110
1.48
DID C2080HSSLT
50.80
15.88
15.88
7.93
41.8
22.5
4.0
23.0
55.8
5,700
1.7
180
2.49
Chain No.
Pitch
P
Pin
Plate
Double Pitch
Note: The values of the avg. tensile strength and max. allowable load are for the chains (attachments aren't included).
Dimensions of attachment
Chain No.
Attachment
Pitch
P
Y1
C1
C2
O1
DID C2040SSLT
25.40
9.1
12.70
20.2
19.8
11.1
13.5
9.53
19.3
3.6
5.2
1.5
DID C2050SSLT
31.75
11.1
15.88
25.2
24.6
14.3
15.9
11.91
24.0
5.2
6.8
2.0
DID C2060HSSLT
38.10
14.7
21.43
32.8
30.6
17.5
19.1
14.30
28.8
5.2
8.7
3.2
DID C2080HSSLT
50.80
19.1
27.78
43.4
41.4
22.2
25.4
19.05
38.1
6.8
10.3
4.0
Note: 1. Attachments with one hole are indicated as SA1, SK1, A1, K1, and those with two holes are indicated as SA2, SK2, A2, K2.
2. Specify the intervals between the attachments when ordering.
3. Unless otherwise specified, the attachments are attached to the outer links of even numbers.
195
Others
Name
Features
Others
Small Conveyor
Chains
Flat
Plate
Type
Chain
2P-TR
1P-TR TG TRB 2P-TR1P-TR SR SG SRB HP FX
Duplex
Every
Overturn
With
Every
Every link
Every link
two links
prevention breaks two links
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
35
40
50
60
80
100
120
C2040
C2050
C2060H
C2080H
C2100H
C2042
C2052
C2062H
C2082H
C2102H
I2
I
I
I
I
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
S 3
S
S
S
S
IO2
IO
IO
IO
IO
I
I
I
I
I
I
I
I
I
I
OI2
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
OI
S 3
S
S
S
S
Meandering With
prevention breaks
196
L 3
L
L
L
L
Others
Push Chain
(PU)
197
Features
Others
Name
Flexible Chain
(FX)
[Type indication]
[Type indication]
DID 50 1P-TR-J
DID 50 2P-TR-F
Chain size
F: Steel
[ J: Plastic
Chain size
(A chain with top rollers attached to outer links is not available as standard.)
Others
Small Conveyor
Chains
(The diameter of top rollers is smaller than that of every-two-link top rollers)
F: Steel
[ J: Plastic
DID 40 TR
12.70
DID 50 TR
DID 60 TR
Unit (mm)
Pin
d1
Plate
kN
kgf
kgf
7.95
7.92
3.97
17.6
9.5
1.5
12.0
18.6
1,900
2.64
270
15.875
9.53
10.16
5.09
21.9
11.6
2.0
15.0
28.4
2,900
4.41
450
19.05
12.00
11.91
5.96
26.9
14.3
2.4
18.1
44.1
4,500
6.37
650
DID 80 TR
25.40
15.88
15.88
7.94
35.4
19.0
3.2
24.0
DID100 TR
31.75
19.05
19.05
9.54
42.5
22.7
4.0
29.9
78.4
118
8,000
10.7
1,100
12,100
17.1
1,750
Approx. weightkg/m
R
d2
L3
Approx. weightkg/m
R
Iron
Resin
d2
L1
L2
L3
Iron
Resin
DID 40 2P-TR
1.21
0.85
1.90
1.04
DID 50 2P-TR
1.86
1.41
2.49
1.77
DID 60 2P-TR
2.82
2.07
3.81
2.60
DID 80 2P-TR
4.79
3.62
6.62
4.68
DID100 2P-TR
7.63
5.43
9.76
6.82
Note: 1. Approx. weight indicates the value for every-two-link top roller chains.(for inner link)
2. The material of resin top roller is polyacetal.
Long life
Rustless
Double guard
O-ring
O-ring (Rustless)
Sintered
Sintered (Rustless)
DID 40 TR
DID 40D TR
DID 40N TR
DID 40WG TR
DID 40LX TR
DID 40LXN TR
DID C40UR TR
DID C40URN TR
DID 50 TR
DID 50D TR
DID 50N TR
DID 50WG TR
DID 50LX TR
DID 50LXN TR
DID C50UR TR
DID C50URN TR
DID 60 TR
DID 60D TR
DID 60N TR
DID 60WG TR
DID 60LX TR
DID 60LXN TR
DID C60UR TR
DID C60URN TR
DID C80UR TR
DID C80URN TR
DID 80 TR
DID 80D TR
DID 80N TR
DID 80WG TR
DID 80LD TR
DID 80LDN TR
DID100 TR
DID100D TR
DID100N TR
DID100WG TR
DID100LD TR
DID100LDN TR
198
Others
12.70
15.875
19.05
Unit (mm)
Pin
d1
Plate
f
7.92
14.4
3.97
32.1
9.5
1.5
12.0
10.16
18.1
5.09
40.1
11.6
2.0
15.0
12.7
11.91
22.8
5.96
49.8
14.3
2.4
18.1
25.40
15.88
15.88
29.3
7.94
64.7
19.0
3.2
24.1
31.75
19.05
19.05
35.8
9.54
78.7
22.8
4.0
29.9
9.53
L2
L3
3.97
17.1
15.5
13.2
12.7
5.24
21.0
19.3
16.2
26.25
15.9
5.96
26.6
24.2
20.4
24.6
34.15
19.1
7.94
33.6
31.1
26.1
31.8
44.5
25.4
9.54
40.6
37.7
31.0
d2
15.88
12.7
17.45
9.5
19.05
16.2
22.55
22.23
18.3
28.58
DID100-2 2P-TR-F
39.69
Chain No.
F: Steel
[ J: Plastic
199
[Type indication]
[Type indication]
Chain size
Chain size
F: Steel
J: Plastic
F: Steel
J: Plastic
Others
Small Conveyor
Chains
1. The connecting links for DIDC2080H-2 ~ C2100H-2 are cotter types. Even so, the dimensions of pins are the same as
those shown in the table of dimensions.
2. In the case of DIDC2060H-2 or larger, dimension E (transverse pitch) is different from that of the standard sprocket.
Refer to the tooth profile for HK type duplex chains (P116).
3. When attached to even-numbered links, the top rollers are attached to inner links unless specified otherwise.
200
d1
3.97 17.6
9.5
1.5 11.7
14.4
17.0
1,740
2.64
270
34.0
3,480
4.49
460
2.0 15.1
18.1
28.7
2,930
4.41
450
57.4
5,860
7.49
760
3.2 17.2
26.2
40.2
4,100
6.47
660
80.4
8,200
11.0
1,120
4.0 23.3
32.6
68.6
7,000 11.2
1,150 137
14,000
19.0
1,950
4.8 28.8
39.1
11,500 18.6
1,900 224
23,000
31.6
3,230
112
Simplex
Approx. weightkg/m
Dimensions
Chain No.
R
L1
L2
d2
Iron
Plastic
DID C2040 TR
1.31
0.89
15.88 15.0 21.0 8.45 10.1
5.24
DID C2042 TR
1.68
1.26
DID C2050 TR
2.04
1.44
19.05 19.0 26.5 10.50 12.9
5.96
DID C2052 TR
2.52
1.92
DID C2060H TR
3.62
2.71
22.23 23.0 31.6 14.75 17.4
7.94
DID C2062H TR
4.34
3.44
DID C2080H TR
5.58
4.22
28.58 29.0 39.3 17.80 20.6
9.54
DID C2082H TR
6.69
5.33
DID C2100H TR
9.02
6.42
39.69 35.4 48.7 22.10 26.6 14.29
DID C2102H TR
11.28
8.68
Note: 1. Approx. weight is of the chain with every 2 pitch top roller (for inner link).
2. The plastic top roller is made of polyacetal.
Approx. weightkg/m
Dimensions
R
d2
L1
L2
L3
Iron
Plastic
2.48
3.12
3.87
4.78
6.87
8.24
10.60
12.71
17.13
21.43
1.64
2.34
2.73
3.64
5.14
6.53
8.01
10.12
12.19
16.49
Long life
DID C2040D TR
DID C2042D TR
DID C2050D TR
DID C2052D TR
DID C2060HD TR
DID C2062HD TR
DID C2080HD TR
DID C2082HD TR
DID C2100HD TR
DID C2102HD TR
Rustless
DID C2040N TR
DID C2042N TR
DID C2050N TR
DID C2052N TR
DID C2060HN TR
DID C2062HN TR
DID C2080HN TR
DID C2082HN TR
DID C2100HN TR
DID C2102HN TR
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
Strength of simplex
Strength of duplex
Duplex
transverse pitch Avg. tensile strength Max. allowable load Avg. tensile strength Max. allowable load
kN
kgf
kN
kgf
kN
kgf
kN
kgf
E
Plate
Double guard
DID C2040WG TR
DID C2042WG TR
DID C2050WG TR
DID C2052WG TR
DID C2060HWG TR
DID C2062HWG TR
DID C2080HWG TR
DID C2082HWG TR
DID C2100HWG TR
DID C2102HWG TR
O-ring
DID C2040LX TR
DID C2042LX TR
DID C2050LX TR
DID C2052LX TR
DID C2060HLX TR
DID C2062HLX TR
201
O-ring (rustless)
DID C2040LXN TR
DID C2042LXN TR
DID C2050LXN TR
DID C2052LXN TR
DID C2060HLXN TR
DID C2062HLXN TR
Sintered
DID C2040UR TR
DID C2042UR TR
DID C2050UR TR
DID C2052UR TR
DID C2060HUR TR
DID C2062HUR TR
DID C2080HUR TR
DID C2082HUR TR
Sintered (rustless)
DID C2040URN TR
DID C2042URN TR
DID C2050URN TR
DID C2052URN TR
DID C2060HURN TR
DID C2062HURN TR
DID C2080HURN TR
DID C2082HURN TR
Others
Chain No.
Unit (mm)
Pin
Top Roller Chains are also available with guide links that prevent overturning of loads by suppressing chain inclination.
[Type indication]
DID 50 2P-TR-F6P-TG I
Others
Small Conveyor
Chains
Unit (mm)
Dimensions
B
Y1
C1
W1
W2
DID 50 TG
DID 60 TG
DID 80 TG
DID100 TG
DID 40 TG
Chain No. - Top Roller Chain Overturn Prevention Series (Single Pitch)
Standard
Long life
Rustless
Double guard
O-ring
O-ring (rustless)
Sintered
Sintered (rustless)
DID 40 TG
DID 40D TG
DID 40N TG
DID 40WG TG
DID 40LX TG
DID 40LXN TG
DID C40UR TG
DID C40URN TG
DID 50 TG
DID 50D TG
DID 50N TG
DID 50WG TG
DID 50LX TG
DID 50LXN TG
DID C50UR TG
DID C50URN TG
DID 60 TG
DID 60D TG
DID 60N TG
DID 60WG TG
DID 60LX TG
DID 60LXN TG
DID C60UR TG
DID C60URN TG
DID 80 TG
DID 80D TG
DID 80N TG
DID 80WG TG
DID 80LD TG
DID 80LDN TG
DID C80UR TG
DID C80URN TG
DID100 TG
DID100D TG
DID100N TG
DID100WG TG
DID100LD TG
DID100LDN TG
202
[Type indication]
Others
Unit (mm)
Dimensions
Y1
DID C2040 TG
25.40
19.1
12.7
1.5
7.95
DID C2050 TG
31.75
23.8
15.9
2.0
9.53
DID C2060H TG
38.10
28.6
19.1
3.2
12.70
DID C2080H TG
50.80
38.1
25.4
4.0
15.88
DID C2100H TG
63.50
47.6
31.8
4.8
19.05
Chain No. - Top Roller Chain Overturn Prevention Series (Double Pitch)
Standard
DID C2040 TG
DID C2042 TG
DID C2050 TG
DID C2052 TG
DID C2060H TG
DID C2062H TG
DID C2080H TG
DID C2082H TG
DID C2100H TG
DID C2102H TG
Long life
DID C2040D TG
DID C2042D TG
DID C2050D TG
DID C2052D TG
DID C2060HD TG
DID C2062HD TG
DID C2080HD TG
DID C2082HD TG
DID C2100HD TG
DID C2102HD TG
Rustless
DID C2040N TG
DID C2042N TG
DID C2050N TG
DID C2052N TG
DID C2060HN TG
DID C2062HN TG
DID C2080HN TG
DID C2082HN TG
DID C2100HN TG
DID C2102HN TG
Double guard
DID C2040WG TG
DID C2042WG TG
DID C2050WG TG
DID C2052WG TG
DID C2060HWG TG
DID C2062HWG TG
DID C2080HWG TG
DID C2082HWG TG
DID C2100HWG TG
DID C2102HWG TG
O-ring
DID C2040LX TG
DID C2042LX TG
DID C2050LX TG
DID C2052LX TG
DID C2060HLX TG
DID C2062HLX TG
203
O-ring (rustless)
DID C2040LXN TG
DID C2042LXN TG
DID C2050LXN TG
DID C2052LXN TG
DID C2060HLXN TG
DID C2062HLXN TG
Sintered
DID C2040UR TG
DID C2042UR TG
DID C2050UR TG
DID C2052UR TG
DID C2060HUR TG
DID C2062HUR TG
DID C2080HUR TG
DID C2082HUR TG
Sintered (rustless)
DID C2040URN TG
DID C2042URN TG
DID C2050URN TG
DID C2052URN TG
DID C2060HURN TG
DID C2062HURN TG
DID C2080HURN TG
DID C2082HURN TG
Small Conveyor
Chains
[Type indication]
DID 40 1P-SR-JT
Chain size
Installation intervals
of side rollers
Side roller
Others
Chain No.
T: Staggered type
H: Parallel type
E: Antistatic Plastic
Material of side rollers F: Steel
J: Plastic
Installation
method
Plate
T
Unit (mm)
Pin
H
DID 40 SR
1.5
12.0 3.97
DID 50 SR
2.0
15.0 5.09
DID 60 SR
2.4
18.1 5.96
DID 80 SR
3.2
24.0 7.94
DID100 SR
4.0
29.9 9.54
Note: 1. L3 indicates the value of L1 when cotter type pins are used.
2. The material of plastic side roller is polyacetal.
Side roller
L1
L2
L3
17.7
21.7
27.8
35.1
42.4
10.1
12.0
15.1
19.0
22.8
19.5
23.5
30.3
37.7
45.4
15.88
7.8
19.05
9.4
22.23 12.6
28.58 15.8
39.69 19.0
Avg. tensile strength Max. allowable load Approx. weight (kg/ pc.)
Plastic
Iron
kN
kgf
kN
kgf
side roller side roller
16.6 1,700 2.64
270 0.004 0.013
27.9 2,850 4.41
450 0.007 0.023
40.2 4,100 6.37
650 0.013 0.042
78.4 8,000 10.70 1,100 0.026 0.086
118.0 12,100 17.10 1,750 0.084 0.197
SR
SR
SR
SR
SR
Long life
DID 40D
DID 50D
DID 60D
DID 80D
DID100D
Rustless
SR
SR
SR
SR
SR
DID 40N
DID 50N
DID 60N
DID 80N
DID100N
Double guard
SR
SR
SR
SR
SR
DID 40WG
DID 50WG
DID 60WG
DID 80WG
DID100WG
O-ring
SR
SR
SR
SR
SR
DID 40LX
DID 50LX
DID 60LX
DID 80LD
DID100LD
O-ring (rustless)
SR
SR
SR
SR
SR
DID 40LXN
DID 50LXN
DID 60LXN
DID 80LDN
DID100LDN
SR
SR
SR
SR
SR
Sintered
DID
DID
DID
DID
C40UR
C50UR
C60UR
C80UR
Sintered (rustless)
SR
SR
SR
SR
DID
DID
DID
DID
C40URN
C50URN
C60URN
C80URN
SR
SR
SR
SR
Chain size
Installation intervals of side rollers
Side roller
Unit (mm)
Plate
Pin
Side roller
L1
L2
L3
1.5
2.0
3.2
4.0
4.8
11.7
15.1
17.2
23.3
28.8
3.97
5.09
5.96
7.94
9.54
17.7
21.7
29.4
36.7
43.7
10.1
12.0
17.0
20.7
24.5
19.5
23.5
32.0
39.3
46.9
15.88
7.8
19.05
9.4
22.23 12.6
28.58 15.8
39.69 19.0
Avg. tensile strength Max. allowable load Approx. weight (kg/ pc.)
Plastic
Iron
kN
kgf
kN
kgf
side roller side roller
17.0 1,740 2.64
270 0.004 0.013
28.7 2,930 4.41
450 0.007 0.023
40.2 4,100 6.47
660 0.013 0.042
68.6 7,000 11.20 1,150 0.026 0.086
112.0 11,500 18.60 1,900 0.084 0.197
Long life
DID C2040D SR
DID C2042D SR
DID C2050D SR
DID C2052D SR
DID C2060HD SR
DID C2062HD SR
DID C2080HD SR
DID C2082HD SR
DID C2100HD SR
DID C2102HD SR
Rustless
DID C2040N SR
DID C2042N SR
DID C2050N SR
DID C2052N SR
DID C2060HN SR
DID C2062HN SR
DID C2080HN SR
DID C2082HN SR
DID C2100HN SR
DID C2102HN SR
Double guard
DID C2040WG SR
DID C2042WG SR
DID C2050WG SR
DID C2052WG SR
DID C2060HWG SR
DID C2062HWG SR
DID C2080HWG SR
DID C2082HWG SR
DID C2100HWG SR
DID C2102HWG SR
O-ring
DID C2040LX SR
DID C2042LX SR
DID C2050LX SR
DID C2052LX SR
DID C2060HLX SR
DID C2062HLX SR
204
O-ring (rustless)
DID C2040LXN SR
DID C2042LXN SR
DID C2050LXN SR
DID C2052LXN SR
DID C2060HLXN SR
DID C2062HLXN SR
Sintered
DID C2040UR SR
DID C2042UR SR
DID C2050UR SR
DID C2052UR SR
DID C2060HUR SR
DID C2062HUR SR
DID C2080HUR SR
DID C2082HUR SR
Sintered (rustless)
DID C2040URN SR
DID C2042URN SR
DID C2050URN SR
DID C2052URN SR
DID C2060HURN SR
DID C2062HURN SR
DID C2080HURN SR
DID C2082HURN SR
[Type indication]
T: Staggered type
H: Parallel type
Installation method
E: Antistatic Plastic
F: Steel
J: Plastic
Unit (mm)
Pitch
Chain No.
Roller link
width
P
W
25.40
7.95
31.75
9.53
38.10 12.70
Roller (bush)
dia.
D
15.88
19.05
22.23
Plate
T
DID C2042 SG
1.5
DID C2052 SG
2.0
DID C2062H SG
3.2
Note: The material of plastic side roller is polyacetal.
Pin
Side roller
L1
L2
11.7
15.1
17.2
3.97
5.09
5.96
22.9
25.3
29.8
10.1
12.1
17.0
23
27
30
13
13
13
16.5
20.0
25.4
19.0
24.0
27.0
Chain No. - Side Roller Chain Meandering Prevention Series (Double Pitch)
Standard
DID C2042 SG
DID C2052 SG
DID C2062H SG
Long life
DID C2042D SG
DID C2052D SG
DID C2062HD SG
Rustless
DID C2042N SG
DID C2052N SG
DID C2062HN SG
Double guard
O-ring
DID C2042WG SG
DID C2042LX SG
DID C2052WG SG
DID C2052LX SG
DID C2062HWG SG DID C2062HLX SG
205
O-ring (rustless)
Sintered
Sintered (rustless)
DID C2042URN SG
DID C2052URN SG
DID C2062HURN SG
Others
Chain size
Installation intervals of side rollers
If the revolution friction resistance of the roller is too small, loads can be stuck with the slightest friction. The revolution
friction resistance of the Free Flow Chain is enhanced by applying breaks for some of the rollers to prevent
accumulation of loads.
Coil spring
Others
Small Conveyor
Chains
The above figure is an example of DID40 Top Roller Chain with breaks.
206
The above figure is an example of DID40 Side Roller Chain with breaks.
207
Others
Detail of A
Small Conveyor
Chains
Unit (mm)
Others
Chain No.
DID 40HP
DID 50HP
DID 60HP
Pin
Plate
d1
d2
5.62
7.20
8.45
4.00
5.12
5.99
16.0
20.2
25.1
17.5
21.7
26.8
09.5
11.6
14.3
1.5
2.0
2.4
12.0
15.0
18.1
Note: The values of average tensile strength and maximum allowable load are for chains.
Chain No.
Pin
d1
d2
Plate
F
DID C2040HP
5.62
4.00
16.0
17.5
9.5
DID C2042HP
DID C2050HP
7.20
5.12
20.2
21.7
11.6
DID C2052HP
DID C2060HP
8.45
5.99
25.1
26.8
14.3
DID C2062HP
DID C2080HP
11.30 8.02
32.5
34.1
17.8
DID C2082HP
Note: The values of average tensile strength and maximum allowable load are for chains.
1.5
11.7
2.0
15.1
2.4
17.2
3.2
23.3
(Double Pitch)
Standard
Rusltess
Double guard
DID 40HP
DID 50HP
DID 60HP
DID 40HPN
DID 50HPN
DID 60HPN
DID 40HPWG
DID 50HPWG
DID 60HPWG
Standard
DID
DID
DID
DID
DID
DID
DID
DID
208
C2040HP
C2042HP
C2050HP
C2052HP
C2060HP
C2062HP
C2080HP
C2082HP
Rusltess
DID
DID
DID
DID
DID
DID
DID
DID
C2040HPN
C2042HPN
C2050HPN
C2052HPN
C2060HPN
C2062HPN
C2080HPN
C2082HPN
Double guard
DID
DID
DID
DID
DID
DID
DID
DID
C2040HPWG
C2042HPWG
C2050HPWG
C2052HPWG
C2060HPWG
C2062HPWG
C2080HPWG
C2082HPWG
Flexible Chain
Others
DID Flexible Chain has great sideward bending flexibility and is suitable for curved traveling. Sprockets for JIS/ANSI
Standard Roller Chain can be used for this chain. By fixing attachments, this chain can be used for curved transfer with
conveyors.
Chain No.
DID 40FX
DID 50FX
DID 60FX
DID 80FX
Roller
dia.
D
07.92
10.16
11.91
15.88
Pin
Plate
3.97
5.09
5.96
7.94
16.9
20.7
25.8
33.8
18.6
22.0
28.4
36.5
10.4
11.9
15.4
19.5
1.5
2.0
2.4
3.2
12.0
15.0
18.1
24.0
10.4
13.0
15.6
20.8
Note 1. The radius of the curve must be set larger than the values above.
2. The values of average tensile strength and maximum allowable load are for chains.
40FX
50FX
60FX
80FX
Long life
DID
DID
DID
DID
40FXD
50FXD
60FXD
80FXD
Rustless
DID
DID
DID
DID
40FXN
50FXN
60FXN
80FXN
Double guard
DID
DID
DID
DID
40FXWG
50FXWG
60FXWG
80FXWG
209
Min. lateral
bending radius
R
350
400
500
600
Others
Small Conveyor
Chains
This chain is suited for conveyor systems because it has flat plates that cause little damage to components such as
chain guides. (The forms of outer plates and inner plates are the same.)
Unit (mm)
Chain No.
DID35F
Pin
E
12.0
13.1
Plate
G
07.3
1.25
09.0
09.5
1.50
12.0
019.1
1,950
0.65
2.00
15.0
030.8
3,150
1.15
011.2
1,150
0.39
DID40F
16.5
17.6
DID50F
15.875 09.53
10.16
05.09
20.3
21.9
11.6
DID60F
19.050 12.70
11.91
05.96
25.4
26.9
14.3
2.40
18.1
044.1
4,500
1.70
DID80F
25.400 15.88
15.88
07.94
32.6
35.4
19.0
3.20
24.0
078.4
8,000
2.67
DID100F
31.750 19.05
19.05
09.54
39.5
42.5
22.7
4.00
29.9
118.0
12,100
4.19
DID120F
38.100 25.40
22.23
11.11
49.7
53.0
28.2
4.80
35.9
166.0
17,000
6.12
Long life
Rusltess
Double guard
High guard
O-ring
O-ring (rustless)
DID 35F
DID 40F
DID 50F
DID 60F
DID 80F
DID 100F
DID 120F
DID 35FD
DID 40FD
DID 50FD
DID 60FD
DID 80FD
DID 100FD
DID 120FD
DID 35FN
DID 40FN
DID 50FN
DID 60FN
DID 80FN
DID 100FN
DID 120FN
DID 35FWG
DID 40FWG
DID 50FWG
DID 60FWG
DID 80FWG
DID 100FWG
DID 120FWG
DID 35FE
DID 40FE
DID 50FE
DID 60FE
DID 80FE
DID 100FE
DID 120FE
DID 35FLD
DID 40FLX
DID 50FLX
DID 60FLX
DID 80FLD
DID 100FLD
DID 120FLD
DID 35FLDN
DID 40FLXN
DID 50FLXN
DID 60FLXN
DID 80FLDN
DID 100FLDN
DID 120FLDN
210
memo
211
Technical Information
When you design various conveyor systems using DID small conveyor chains, the following basic conditions must be
satisfied.
a. Chain tension: The actual tensile strength in operation must be significantly lower than the specified strength of the chain.
b. Strength of loaded components of chain: The actual loads applied to attachments, such as rollers of base chain, top
rollers, side rollers, etc. in operation must be significantly smaller than the strength of these components.
c. Wear life of chain: Lubrication conditions to ensure the wear life of chain must be fulfilled.
d. Sag adjustment of chain: The sag of the chain must be kept optimum by tension adjusters, take-up devices, guides, etc.
Technical
Information
Small Conveyor
Chains
e. Others: Appropriate measures are taken to prevent rail wear, machine vibration and other problems.
The following complement the above.
Speed coefficient K
Speed coefficient
Less than 15
1.0
1530
1.2
3050
1.4
5070
1.6
7090
2.2
90110
2.8
110120
3.2
When plastic rollers (including anti-static rollers)
are used, run the chain at the speed of 70 m/min
or less.
Note: When the chain speed exceeds 120 m/min, please consult us.
212
TS
kW 52.2
T1cL1f12L2f2
L2
TW2.1cLf1 1,000
2cL2f31.1cLf1
1,000
L1
TS
kW 52.2
Technical
Information
TWcV 1,000
WS
kW 52.2
Hf1V
L
1.1cHf1V 1,000
L
V
S
kW 52.2 TcHf1V
W
L L cHf1V
1
2
L2
V
L1
W
T L L 2.1cL1f1
1
2
1.1cHf1V 1,000
S
kW 52.2 TcHf1V
Symbols:
SI units
213
kN
kg
kg/m
kg/m
kg/m
m/
Technical Information
Technical
Information
Small Conveyor
Chains
Table 1
f1 used when the rollers of chain roll
Chain type
S rollers
R rollers
S rollers
Chain with plastic rollers
R rollers
S rollers
Chain with sintered bushing rollers
R rollers
Chain with iron rollers
Lubrication
Not provided Provided
0.21
0.14
0.12
0.08
0.12
0.08
0.14
0.08
Table 2
f1 used when side rollers roll on the floor
Chain type
Chain with iron rollers
Chain with plastic rollers
Chain with anti-static plastic rollers
Chain with plastic rollers and brakes
Lubrication
Not provided Provided
0.09
0.06
0.06
0.06
0.09
Table 3
f1 used when the plates of chain slide
(in the case of iron rail)
Without lubrication 0.3
f2
Without lubrication With lubrication
Iron rollers
0.09
0.06
Plastic rollers
0.06
0.06
0.09
214
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
DID
40
C2040
C2042
50
C2050
C2052
60
C2060H
C2062H
80
C2080H
C2082H
100
C2100H
C2102H
Roller of chain
Iron
Plastic
15616
15616
62764
19620
22523
22523
98998
29430
37238
37238
1,530157
49050
62764
62764
2,540260
88290
91293
91293
3,660374
1,270130
Top roller
Iron
Plastic
15616
49 5
15616
49 5
15616
49 5
22523
68 7
22523
68 7
22523
68 7
37238
10711
37238
10711
37238
10711
62764
17618
62764
17618
62764
17618
91293
29430
91293
29430
91293
29430
Side roller
Iron
Plastic
15616
49 5
15616
49 5
15616
11712
22523
68 7
22523
68 7
22523
13714
37238
10711
37238
10711
37238
15616
62764
17618
62764
17618
62764
91293
29430
91293
29430
91293
215
Chain No.
UnitN (kgf/pc.)
Technical
Information
Allowable loads per one roller of chain, top roller and side roller
Date of inquiry:
Year
Month
]
Day
Name
Department
Company name
TEL
FAX
Address
Manufacturer
Manufacturer
Service conditions
Abrasiveness
With / without
Adhesion
With / without
DimensionsMass
Motor used
AC / DC
kW
units
rpm
Chain pitch
mm
kg/pc.
kNkgf
kg
Roller type
t / hr
Chain
Conveyed quantity
Service conditions
Detail
S / M / R / F / Special
Machine length
Lifting height
Conveyance speed
m / min
PCD
mm
PCD
Tolerance: H7 / H8 / Other
Other
Hr / day
days/year
Sprocket
Conveyed material
Machine concerned
Yes
No
Hub form
Type A / B / C
Key groove
Tooth Finish Precision fusion cutting / Mechanical toothed wheel cutting / Induction hardening / Hard facing
Operating hours
Parallel or Tapered
216
34
Conveyor
Chains
Outline of Conveyor
Chains
3. DK Conveyor Chains
Standard Conveyor
Chain
Anti-seizing Roller
Conveyor Chain
Bearing Assembled
Roller Conveyor Chain
Seal Chain
Strong H-type and
Z-type Conveyor Chain
High Link-plate Chain
Conveyor Chain
with Side Roller
Conveyor Chain
with Top Roller
4. DK Specialty
Conveyor Chains
Specialized Application
Conveyor Chain
Water Treatment
Conveyor Chain
3D Bending
Conveyor Chain
Others
217
Conveyor Chains
Classification
DK conveyor chains are classified into DK Conveyor Chains and DK Specialty Conveyor Chains. DK Conveyor Chains
are further classified into Standard Conveyor Chain, Strong H-type Conveyor Chain and Strong Z-type Conveyor Chain,
stated in the order of higher strength. For DK Conveyor Chains, a large variety of attachments and additional features
are available for wide-range use. The variation of chains is described in the following section in detail.
DK Specialty Conveyor Chains are customized in dimensions and material to be the most suitable for respective
applications such as continuous flow conveyors and water treatment equipment. Furthermore, the unique 3D Bending
Conveyor Chains are designed to run vertically and horizontally between the ceiling and the floor for conveying lifted or
dragged articles. Sprockets used for DK conveyor chains are standardized to cover various numbers of teeth. See the
section of DK Conveyor Chain Sprocket (p327-341). In addition to the above conveyor chains, we can custom design
special conveyor chains.
Additional Features
Specialized Application
Conveyor Chains
Roller Type
Water Treatment
Conveyor Chains
218
3D Bending
Conveyor Chains
Sprocket
Dimension
DK Conveyor Chains
Outline
DK Conveyor Chains
Classification
Other Chains
Construction
Inner link plate
Pin
Bushing
T-pin
Inner link
Outer link
Pins
Plates
Pins support all the load acting on the chain together with
plates, and when the chain is engaged with the sprockets,
they slide together with bushings as bearings. They are
subject to wear and especially must have high shear
strength, bending strength and wear resistance. Hardened
and tempered tough steel, carburized steel, or inductionhardened steel is used.
Rollers
T-pins
Bushings
Bushings are located between pins and rollers and act as
bearings for both the pins and rollers not to transmit the
load received by the rollers directly to the pins when the
chain is engaged with the sprockets. They are required to
have high shock fatigue strength, collapse strength and
wear resistance, and in general, carburized steel is used.
219
DK Conveyor Chains
Roller
Outline
Conveyor Chains
Outline
DK Conveyor Chains
DK 09 100F-A 2P A2 x100L
Number of links ordered
Standard type
Chain pitch
Attachment type
Roller F type
Example 2
Chain pitch: 100 mm
Average tensile strength: 156 kN (16,000 kgf)
Roller type: F
Chain strength: Heavy-duty
Attachment: A2 attachments are installed every two links
Order quantity: 100 links
[Type indication]
DK 09 100F-K 2P A2x100L
K indicates a heavy-duty chain
which has the same dimensions as
a standard chain but it uses
components that are made of
different materials and heat-treated
for higher average tensile strength
of 156 kgf (16,000 kgf). See the list
of specification symbols (P223) .
When replacing existing chains, please let us know the drawing no. of the chains and order quantity.
Consult us for new designs or inquiries.
220
DK Conveyor Chains
221
DK Conveyor Chains
Standard
Conveyor Chain
Classified by Dimensions
DK Conveyor Chains
qR-roller
R-roller Conveyor Chains have rollers
with an outer diameter larger than the
width of plates.
Since the rollers can easily roll, the
chain is suitable for running on the floor
while the rollers receive the live load.
wF-roller
Standard
Conveyor Chain
DK Conveyor Chains
eM-roller
M-roller Conveyor Chains have rollers
with an outer diameter slightly smaller
than the width of plates.
An M roller is designed for smoother
engagement with the sprockets. Since
the chain is light in weight, it is suitable
for vertical conveyance.
rS-roller
S-roller Conveyor Chains have rollers
with an outer diameter smaller than
that of the M-roller.
The chain is suitable for vertical
conveyance where rollers are less likely
to be worn.
Roller
Bearing
Outer plate
Pin
Inner plate
222
Pin
R,F
S,M
Carbon steel
Ordinary environment
Carbon steel
Heat treatment
Carbon steel
Alloy steel
Heat treatment
Alloy steel
Heat treatment
D3 Carbon steel
D4
Heavy-duty
Corrosive environment
Roller
Bushing
High wear
resistance
Plate
Alloy steel
Heat treatment
D5 Carbon steel
D6
Alloy steel
Heat treatment
S4
13Cr stainless
steel
SH
S5
Plates are made of 18-8 stainless steel, so that the chain can be used in corrosive
environment such as exposed to chemical compounds and/or under high temperature.
Stainless steel
S3
Note: The standard chains are designed to be the most cost efficient. Where greater strength or higher wear resistance is required, heavy-duty chains are
recommended.
223
DK Conveyor Chains
(Cost-effective)
Standard
Standard
Conveyor Chain
Material and
heat treatment
Environment
Symbols
DK Conveyor Chains
Standard
Conveyor Chain
DK Conveyor Chains
Double Guard
Coating
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
Acidic
Environment
OK
The surface is treated with outstanding corrosion resistant coating that approaches the resistance of stainless steel.
Double guard coating consists of double layers of two different materials. It exhibits nearly doubled corrosive resistance
in the salt water spray test compared to our conventional high guard coating, and can be used in mild alkaline or mild
acidic conditions up to pH3.
With its improved corrosive resistance, it can be used in circumstances where high guard or plated coatings cannot be
used, and even in some conditions where only stainless steel can be used.
(Double guard coating cannot be applied to welded parts.)
High Guard
Coating
Corrosive
Atmosphere
Moisture,
Salt Water
OK
Plating
Corrosive
Atmosphere
Moisture,
Salt Water
Alkaline
Environment
OK
Plating is mostly done with nickel. It is a coating with both appealing exterior and corrosion resistance. By using it with
grease lubrication, it exhibits excellent corrosion resistance. You can expect the effect to delay hydrogen brittle
destruction when used in circumstances where chains are exposed to sea breeze or acidic sprays.
(Double guard coating cannot be applied to welded parts.)
Symbols
Corrosive
Atmosphere
Resistant against
corrosive gas
(by CASS test)
Moisture,
Salt Water
Alkaline
Environment
Allowable ambient
OK temperature
224
Resistant against
alkali liquid
Acidic
Environment
Resistant against
acid liquid
Chain Specifications
1. Standard Conveyor Chain (for Metric and Inch series)
D1,D3,D5 D2,D4,D6
S4
SH
S3
S5
03075
03100
03125
03150
34.3
3,500
69.6
7,100
34.3
69.6
29.4
49.0
31.3
33.3
3,500 7,100 3,000 5,000 3,200 3,400
DK
DK
DK
DK
07075
07100
07125
07150
68.6
7,000
132
13,500
68.6
132
68.6
103
63.7
81.3
7,000 13,500 7,000 10,500 6,500 8,300
DK 09100
DK 09125
DK 09150
88.2
9,000
156
16,000
88.2
156
83.3
132
73.5
87.2
9,000 16,000 8,500 13,500 7,500 8,900
DK
DK
DK
DK
11100
11125
11150
11200
112
11,500
225
23,000
112
225
102
166
102
112
11,500 23,000 10,500 17,000 10,500 11,500
DK 13150
DK 13200
127
13,000
240
24,500
132
240
122
196
127
127
13,500 24,500 12,500 20,000 13,000 13,000
DK 19200
DK 19250
DK 19300
186
19,000
279
28,500
186
279
171
274
132
176
19,000 28,500 17,500 28,000 13,500 18,000
DK 25200
DK 25250
DK 25300
245
25,000
392
40,000
245
392
205
323
186
225
25,000 40,000 21,000 33,000 19,000 23,000
313
32,000
500
51,000
313
500
294
460
254
313
32,000 51,000 30,000 47,000 26,000 32,000
DK
DK
DK
DK
32200
32250
32300
32450
DK
DK
DK
DK
50250
50300
50450
50600
490
50,000
686
70,000
490
686
490
686
333
519
50,000 70,000 50,000 70,000 34,000 53,000
DK 65300
DK 65450
637
65,000
882
90,000
637
882
568
833
402
588
65,000 90,000 58,000 85,000 41,000 60,000
DK 05101
53.9
5,500
98.0
10,000
53.9
98.0
49.0
78.4
49.0
52.9
5,500 10,000 5,000 8,000 5,000 5,400
DK 08066
DK 08101
78.4
8,000
142
14,500
78.5
142
68.6
112
68.6
73.4
8,000 14,500 7,000 11,500 7,000 7,500
DK 09101
88.2
9,000
156
16,000
88.2
156
83.3
127
83.3
88.2
9,000 16,000 8,500 13,000 8,500 9,000
DK 11152
112
11,500
171
17,500
112
171
102
171
83.3
117
11,500 17,500 10,500 17,500 8,500 12,000
DK 13101
127
13,000
240
24,500
127
240
122
196
127
127
13,000 24,500 12,500 20,000 13,000 13,000
DK 19152
186
19,000
279
28,500
186
279
171
274
132
176
19,000 28,500 17,500 28,000 13,000 18,000
DK 25152
245
25,000
392
40,000
245
392
205
323
186
225
25,000 40,000 21,000 33,000 19,000 23,000
: Standard product
: Custom-made
225
DK Conveyor Chains
With stainless
steel parts
K,E
Stainless steel
Heavy-duty
C,D,P
DK
DK
DK
DK
Outline
BF
R F M S BR UR UF A,J
Wear resistant
Chain No.
Large roller
Flange roller
Medium roller
Small roller
Bearing assembled roller
Large roller with large clearance
Flange roller with large clearance
Roller type
DK Conveyor Chains
30
7.94
30
22.2
40
22.2
20.4 16.7
3.2
(3)
3.2 15.9
(3)
20.4 16.7
7.94
10.6
3.3
R-roller
3.2 15.9
(3)
20.4 16.7
3.2
(3)
S-roller
7.94
Attachment GA2
15
11.5
15
30
10
N
K
11.5
35
49
60
20
11.5
10
3.2
(3)
10
15
15
43
46
30
K
N
Attachment GK2
15
15
Attachment SK2
43
46
30
Attachment K2
11.5
46
K
N
Standard
Conveyor Chain
Attachment SA2
43
Attachment A2
11.5
11.5
DK Conveyor Chains
22.2
15.9
90
12
Bolt : M6
Bolt length limits
Outer link : 23mm
Inner link : 16mm
P
8
G2-hole
Chain No.
Chain size
DK
DK
DK
DK
03075
03100
03125
03150
Roller type
R,F,S
R,F,S
R,F,S
R,F,S
Normal
Heavy duty
A,J
K,E
34.3
(3,500)
DK
DK
DK
DK
03075
03100
03125
03150
69.6
(7,100)
Standard attachments
A1K1
N
175
100
125
150
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
60
65
75
85
60
65
35
40
50
60
35
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,S
R,S
S
R,F,S
R,S
R,F,S
2.8
2.4
2.1
1.8
1.8
1.6
1.5
1.4
G4
Y
32
40
50
60
GA2GK2
K
A2
SA2
A3
K2
SK2
K3
G4
0.05
0.06
0.07
0.08
0.10
0.12
0.14
0.16
Note: 1. Values in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
226
Dimensional Drawings: DK 07075, DK 07100, DK 07125 and DK 07150 (for Metric series)
F-roller
4.5
(4)
22
2.5
4.5
(4)
40
11.0
40
32
50
32
4.5
(4)
27.7 23.7
4.5
(4)
22
27.7 23.7
11.0
14
4.5
R-roller
22
4.5
(4)
11.0
32
22.2
DK Conveyor Chains
27.7 23.7
4.5
(4)
S-roller
K
N
Attachment GA2
20.5
20.5
15.5
Attachment SA2
50
35
N
K
15.5
40
54
70
22
15.5
20.5
10
4.5
(4)
10
20.5
20.5
50
56
35
K
N
Attachment GK2
15.5
20.5
Attachment SK2
50
56
35
Attachment K2
Standard
Conveyor Chain
10
15.5
56
Attachment A2
15.5
90
Bolt: M8
Bolt length limits
Outer link: 35mm
Inner link: 25mm
16
10
G2-hole
Chain No.
Chain size
DK
DK
DK
DK
07075
07100
07125
07150
Roller type
R,F,S
R,F,S
R,F,S
R,F,S
Normal
Heavy duty
A,J
K,E
68.6
(7,000)
DK
DK
DK
DK
07075
07100
07125
07150
132
(13,500)
Standard attachments
A1K1
K
175
100
125
150
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
60
65
75
85
65
85
35
40
50
60
40
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,F,S
R,S
R,S
R,F,S
R,F,S
R,F,S
5.9
5.2
4.8
4.4
3.8
3.6
3.5
3.4
G4
Y
40(34)
50
60
GA2GK2
K
A2
SA2
A3
K2
SK2
K3
G4
0.09
0.10
0.12
0.13
0.18
0.20
0.24
0.26
Note: 1. Values in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. The K values in ( ) for Attachment GA2 and GK2 are for Roller F.
4. With Attachment GA2 and GK2, check the bolt length limits shown above.
227
DK Conveyor Chains
Dimensional Drawings: DK 09100, DK 09125, DK 09150 and DK 09200 (for Metric series)
F-roller
12.0
3
12.0
45
45
32
60
32
S-roller
12.0
12.0
25.6
34.5 29.6
M-roller
25.6
34.5 29.6
28.6
Attachment GA2
26
19
26
40
12
N
K
19
45
59
75
25
19
26
12
12
26
26
57
64
40
K
N
Attachment GK2
19
26
Attachment SK2
57
64
40
Attachment K2
19
64
Standard
Conveyor Chain
Attachment SA2
57
Attachment A2
19
32
32
DK Conveyor Chains
26.5
K
N
34.5 29.6
6 25.6
34.5 29.6
16
5
R-roller
90
Bolt: M10
Bolt length limits
Outer link: 43mm
Inner link: 30mm
22
5
12
G2-hole
Chain No.
Chain size
Roller type
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
09100
09125
09150
09200
Pitch
Normal
Heavy duty
A,J
K,E
88.2
(9,000)
156
(16,000)
Standard attachments
A1K1
N
100
125
150
200
A2K2
N
K
170
180
190
110
SA2SK2
N
K
90
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,S,M
S,M
R,F,S,M
R,F,S,M
R,F,S,M
09100
09125
09150
09200
40
50
60
80
A3K3
N
K
7.4
6.6
6.0
5.3
5.1
4.8
4.6
4.2
G4
Y
35
45
60
80
GA2GK2
K
5.7
5.4
5.1
4.3
A2
SA2
A3
K2
SK2
K3
G4
0.16
0.18
0.20
0.22
0.32
0.36
0.40
0.44
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
228
Dimensional Drawings: DK 11100, DK 11125, DK 11150 and DK 11200 (for Metric series)
F-roller
14.0
3.5
14.0
50
50
38
38
65
S-roller
14.0
14.0
30.6
38 32.6
M-roller
30.6
38 32.6
31.8
K
N
28.5
28.5
Attachment GA2
21.5
Attachment SA2
69
50
N
K
21.5
50
71
90
28
21.5
28.5
12
12
28.5
28.5
69
76
50
K
N
Attachment GK2
21.5
28.5
Attachment SK2
69
76
50
Attachment K2
Standard
Conveyor Chain
12
21.5
76
Attachment A2
21.5
38
38
28.8
DK Conveyor Chains
38
38 32.6
30.6
32.6
20
6.5
R-roller
90
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
22
5
12
G2-hole
Chain No.
Chain size
Roller type
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
11100
11125
11150
11200
Pitch
Normal
Heavy duty
A,J
K,E
112
(11,500)
225
(23,000)
Standard attachments
A1K1
N
100
125
150
200
A2K2
N
K
170
180
190
110
SA2SK2
N
K
70
90
40
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,S,M
R,S,M
S,M
R,F,S,M
R,F,S,M
R,F,S,M
11100
11125
11150
11200
40
50
60
80
A3K3
N
K
10.1
8.9
7.9
6.8
6.6
6.1
5.7
5.2
G4
Y
35
35
60
80
GA2GK2
K
7.1
6.6
6.1
5.5
A2
SA2
A3
K2
SK2
K3
G4
0.19
0.21
0.24
0.29
0.39
0.42
0.48
0.58
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
229
DK Conveyor Chains
15.9
4
15.9
36.5
47.1 40.4
36.5
47.1 40.4
24
8
R-roller
60
60
38
38
80
M-roller
36.5
15.9
15.9
36.5
47.1 40.4
S-roller
47.1 40.4
34.9
38
38
DK Conveyor Chains
31.8
35.5
81
90
60
26.5
35.5
Attachment GK2
81
90
60
Attachment K2
12
K
N
26.5
35.5
12
26.5
Standard
Conveyor Chain
K
N
Attachment GA2
81
60
90
Attachment A2
32
K
90
Bolt: M10
Bolt length limits
Outer link: 60mm
Inner link: 40mm
22
12
G2-hole
Chain No.
Chain size
Roller type
DK 13150
DK 13200
R,F,S,M
R,F,S,M
Pitch
Normal
Heavy duty
A,J
127
(13,000)
K,E
240
(24,500)
Standard attachments
A1K1
K
150
200
A2K2
N
K
90
110
60
80
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 13150
DK 13200
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
11.6
9.8
7.6
6.9
G4
Y
45
80
GA2GK2
K
8.1
7.2
A2
A3
K2
K3
G4
0.39
0.48
0.78
0.96
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
230
15.9
15.9
47.1 40.4
36.5
65
65
45
45
85
M-roller
36.5
15.9
15.9
36.5
47.1 40.4
S-roller
47.1 40.4
38.1
35.5
35.5
35.5
Attachment G4
15
Standard
Conveyor Chain
26.5
26.5
35.5
35.5
55
100
77.5
15
8
38
26.5
35.5
81
60
82
N
K
15
Attachment GK2
26.5
35.5
Attachment SK2
82
81
60
Attachment K2
K
N
Attachment GA2
26.5
Attachment SA2
82
60
81
Attachment A2
K
N
26.5
45
45
34.9
DK Conveyor Chains
47.1 40.4
24
8
R-roller
90
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
27
6.5
14
G-hole
Chain No.
Chain size
Roller type
DK 19200
DK 19250
DK 19300
R,F,S,M
R,F,S,M
R,F,S,M
Pitch
Normal
Heavy duty
A,J
K,E
186
(19,000)
279
(28,500)
Standard attachments
A1K1
N
200
250
300
A2K2
N
K
120
170
220
180
125
180
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
DK 19200
DK 19250
DK 19300
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,S,M
R,S,M
GA2
GK2
SA2SK2
N
K
120
170
180
125
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
G4
11.5
10.3
9.5
12.1
10.8
10.0
8.4
7.9
7.5
G4
Y
180
125
150
100
100
80
80
125
125
R,F,S,M R,F,S,M
R,F,S,M R,F,S,M
R,F,S,M
GA2GK2
K
8.6
8.1
7.8
A2
SA2
A3
K2
SK2
K3
G4
0.49
0.69
0.89
0.98
1.38
1.78
0.95
1.20
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
231
DK Conveyor Chains
9
9
19.1
5
51.8
59.8 51.7
9
51.8
59.8 51.7
19.1
35.5
12.5
R-roller
80
80
50
50
105
S-roller
19.1
19.1
51.8
59.8 51.7
M-roller
51.8
59.8 51.7
44.5
50
50
DK Conveyor Chains
40.1
Attachment A2
Attachment G4
Attachment GA2
90
Standard
Conveyor Chain
K
N
14
45.5
35
45.5
97
75
107
6.5
27
K
G4-hole
Bolt: M12
15
Attachment K2
Attachment GK2
K
N
35
45.5
35
45.5
97
107
75
97
107
75
15
90
27
45
6.5
Bolt: M12
Bolt length limits
Outer link: 80mm
Inner link: 60mm
14
G2-hole
Chain No.
Chain size
Roller type
DK 25200
DK 25250
DK 25300
R,F,S,M
R,F,S,M
R,F,S,M
Pitch
Normal
Heavy duty
A,J
K,E
245
(25,000)
392
(40,000)
Standard attachments
A1K1
K
200
250
300
A2K2
N
K
120
170
220
180
125
180
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
DK 25200
DK 25250
DK 25300
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
GA2
GK2
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
G4
18.2
15.9
14.5
19.5
17.0
15.3
11.4
10.6
19.9
G4
Y
170
110
150
100
140
80
80
125
125
R,F,S,M R,F,S,M
R,F,S,M R,F,S,M
R,F,S,M
GA2GK2
K
11.9
11.0
10.3
A2
A3
K2
K3
G4
0.63
0.90
1.16
1.26
1.80
2.32
1.05
1.32
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
232
Dimensional Drawings: DK 32200, DK 32250, DK 32300 and DK 32450 (for Metric series)
F-roller
39
13.5
22.2
6
62.8 55.7
9
57.6
22.2
100
100
65
65
130
M-roller
57.6
22.2
22.2
57.6
62.8 55.7
S-roller
50.8
48.5
48.5
107
80
118
K K
N
15
Attachment GK2
48.5
15
Attachment G4
Attachment K2
K K
N
90
33
7.5
107
80
118
117
80
107
15
15
18
90
G4-hole
Bolt: M16
27
6.5
55
55
38
107
48.5
80
118
107
117
80
Attachment K3
K
N
K
Y
38
K
N
Attachment GA2
Attachment A3
107
80
117
Attachment A2
38
65
65
44.5
DK Conveyor Chains
62.8 55.7
Standard
Conveyor Chain
62.8 55.7
R-roller
90
27
14
6.5
14
G2-hole
Bolt: M12
Bolt length limits
Outer link: 86mm
Inner link: 65mm
Chain No.
Chain size
Roller type
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
32200
32250
32300
32450
Normal
Heavy duty
A,J
K,E
313
(32,000)
500
(51,000)
Standard attachments
A1K1
N
200
250
300
450
A2K2
N
K
120
170
220
330
80
125
180
280
Chain size
Roller type
A1
K1
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
A2
K2
A3
K3
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M R,F,S,M
SA2
SK2
GA2
GK2
A3K3
N
K
330
140
SA2SK2
N
K
GA2GK2
K
G4
Y
170(40)
110(90)
140
220
100
140
170
180
100
100
125
150
150
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
32200
32250
32300
32450
Pitch
G4
R,F,S,M R,F,S,M
R,F,S,M R,F,S,M
R,F,S,M R,F,S,M
R,F,S,M
28.2
24.6
22.0
17.8
30.2
26.2
23.4
18.7
15.5
14.4
13.6
11.9
16.4
15.2
14.2
12.1
A2
A3
K2
K3
G4
0.72
1.01
1.31
1.97
1.44
2.02
2.62
3.97
0.91
1.48
1.78
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller F.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
233
DK Conveyor Chains
Dimensional Drawings: DK 50250, DK 50300, DK 50450 and DK 50600 (for Metric series)
F-roller
74.9 68.1
12 67.4 12
25.4
7
74.9 68.1
25.4
12 67.4 12
44
15
R-roller
125
125
80
80
160
M-roller
12
12 67.4
25.4
74.9 68.1
12 67.4 12
S-roller
74.9 68.1
25.4
57.1
K K
N
60
136
(146)
100
151
(161)
136
(146)
151
(161)
100
K
Attachment GK2
46
46
60
136
(146)
100
151
(161)
Attachment K3
136
(146)
151
(161)
100
Attachment K2
Attachment G4
19
60
Standard
Conveyor Chain
Attachment GA2
Attachment A3
19
K
N
60
Attachment A2
46
80
80
DK Conveyor Chains
50.8
90
7.5
19
18
G4-hole
Bolt: M16
10
90
33
7.5
70
70
33
136
(146)
100
151
(161)
100
136
(146)
K K
N
19
10
K
N
151
(161)
90
33
18
7.5
18
G2-hole
Bolt: M16
Bolt length limits
Outer link: 105mm
Inner link: 75mm
Chain No.
Chain size
Roller type
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
50250
50300
50450
50600
Normal
Heavy duty
A,J
K,E
490
(50,000)
686
(70,000)
Standard attachments
A1K1
N
250
300
450
600
A2K2
N
K
170
220
125
180
Chain size
Roller type
A1
K1
DK
DK
DK
DK
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
A2
K2
A3
K3
R,F,S,M
R,F,S,M
R,F,S,M
R,F,S,M
SA2
SK2
GA2
GK2
A3K3
N
K
330
410
140
180
SA2SK2
N
K
GA2GK2
K
G4
Y
190 (55)
140(105)
220
300
140
170
100
100
150
150
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
50250
50300
50450
50600
Pitch
G4
R,F,S,M R,F,S,M
R,F,S,M R,F,S,M
R,F,S,M
R,F,S,M
42.7
38.0
30.3
26.7
45.8
40.4
31.9
28.0
24.1
22.4
19.8
19.0
25.2
23.3
20.2
19.4
A2
A3
K2
K3
G4
2.26
2.93
4.39
5.45
4.52
5.86
18.78
10.90
1.74
2.07
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller F.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
234
16
75
16
16
28
8
88.8 81.2
16
75
140
140
75
75
180
S-roller
16
16
75
28
63.5
24
54
72
Attachment GK2
72
154
54
120
173
Attachment K3
154
120
173
Attachment K2
Attachment G4
72
72
154
120
173
K K
N
24
K
N
Attachment GA2
Attachment A3
154
120
173
Attachment A2
54
75
75
57.1
DK Conveyor Chains
28
16
88.8 81.2
16
M-roller
75
88.8 81.2
Standard
Conveyor Chain
88.8 81.2
28
49
16.5
R-roller
90
8.5
24
G4-hole
Bolt: M20
13
90
8.5
80
80
22
39
90
39
22
8.5
39
154
120
173
120
154
K K
N
24
13
K
N
173
22
G2-hole
Bolt: M20
Bolt length limits
Outer link: 120mm
Inner link: 85mm
Chain No.
Chain size
Roller type
DK 65300
DK 65450
R,F,S,M
R,F,S,M
Pitch
Normal
Heavy duty
A,J
637
(65,000)
K,E
882
(90,000)
Standard attachments
A1K1
N
300
450
A2K2
N
K
180
130
Chain size
Roller type
A1
K1
DK 65300
DK 65450
R,F,S,M
R,F,S,M
A2
K2
A3
K3
R,F,S,M
R,F,S,M
SA2
SK2
GA2
GK2
330
140
SA2SK2
N
K
GA2GK2
K
G4
Y
120(80)
200
170
100
160
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
G4
R,F,S,M R,F,S,M
R,F,S,M
47.8
37.0
51.2
39.3
28.9
25.5
30.1
26.3
A2
A3
K2
K3
G4
3.44
6.30
6.88
12.6
2.81
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller F.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
235
DK Conveyor Chains
R-roller
9.7
9.7
20.1
25.4
25.4
38.1
27.3 23.3
4.5 22.2
(4)
27.3 23.3
4.5
(4)
S-roller
101.6
16
21
21
16
Attachment GA2
10
N
K
16
16
10
40
70
22
57.3
4.5
(4)
10
21
21
55
60
40
K
N
Attachment GK2
21
21
Attachment SK2
55
60
40
Attachment K2
16
Standard
Conveyor Chain
Attachment SA2
55
40
60
Attachment A2
K
N
101.6
101.6
16
DK Conveyor Chains
101.6
90
16
10
Bolt: M8
Bolt length limits
Outer link: 32mm
Inner link: 25mm
G2-hole
Chain No.
Chain size
Roller type
DK 05101
R,S
Pitch
Normal
Heavy duty
A,J
53.9
(5,500)
K,E
98
(10,000)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
70
40
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 05101
R,S
R,S
R,S
R,S
2.9
G4
Y
45
GA2GK2
K
A2
SA2
A3
K2
SK2
K3
G4
0.12
0.24
Note: 1. Values in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
236
11.3
3
11.3
44.5
44.5
28.6
28.6
60
Roller S
11.3
11.3
27.6
35 30.1
Roller M
27.6
35 30.1
25.4
K
N
Attachment K1
Attachment K2
20
Standard
Conveyor Chain
20
27
27
N
K
12
12
45
75
60.7
28
24
Attachment SK2
72
64
50
64
50
K
N
12
12
72
61
61
45
58
45
12
Attachment SA2
27
50
64
61
45
58
Attachment A2
58
20
Attachment A1
72
28.6
28.6
22.2
DK Conveyor Chains
35
35 30.1
27.6
30.1
18
6.5
R-roller
Attachment GK2
20
27
Attachment GA2
90
20
27
27
20
22
12
G2-hole
Bolt: M8
Bolt length limits
Outer link: 35mm
Inner link: 25mm
Chain No.
Chain size
Roller type
DK 08066
DK 08101
S,M
R,F,S,M
Pitch
Normal
Heavy duty
A,J
78.4
(8,000)
K,E
142
(14,500)
Standard attachments
A1K1
N
66.27
101.6
35
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
70
40
Chain size
Roller type
A1
K1
A2
K2
A3
K3
DK 08066
DK 08101
S,M
R,F,S,M
S,M
R,F,S,M
SA2
SK2
GA2
GK2
R,F,S,M R,F,S,M
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
G4
6.9
7.3
5.3
4.5
G4
Y
35
GA2GK2
K
5.8
5.1
A1,A2
SA2
A3
K1,K2
SK2
K3
G4
0.08
0.20
0.16
0.40
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
237
DK Conveyor Chains
6
27.6
12.7
12.7
36
36 30.6
27.6
30.6
S-roller
26.5
32
32
38.1
27.6
36 30.6
M-roller
12.7
32
DK Conveyor Chains
28.6
27
70
62
45
20
27
Attachment GK2
70
62
45
Attachment K2
12
K
N
20
27
12
20
Standard
Conveyor Chain
K
N
Attachment GA2
70
45
62
Attachment A2
28
90
22
12
Bolt: M10
Bolt length limits
Outer link: 43mm
Inner link: 30mm
G2-hole
Chain No.
Chain size
Roller type
DK 09101
R,S,M
Pitch
Normal
Heavy duty
A,J
88.2
(9,000)
K,E
156
(16,000)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 09101
R,S,M
R,S,M
R,S,M
5.4
G4
Y
40
GA2GK2
K
5.7
A2
A3
K2
K3
G4
0.19
0.38
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
238
21
7.5
12.7
3
37.6 32.2
6
30.8
12.7
50.8
50.8
38
38
65
M-roller
30.8
12.7
12.7
30.8
37.6 32.2
S-roller
37.6 32.2
28.6
K
N
Attachment G4
28.5
28.5
28.5
Attachment GA2
21.5
Attachment SA2
64
50
12
Attachment K2
Attachment SK2
Attachment GK2
P
21.5
28.5
21.5
64
28.5
P
72
50
Standard
Conveyor Chain
72
Attachment A2
21.5
38
38
25.8
DK Conveyor Chains
37.6 32.2
R-roller
90
K
N
N
K
G4-hole
Bolt: M10
50
71
90
32
21.5
12
12
12
28.5
21.5
28.5
72
50
64
22
90
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
22
12
G2-hole
Chain No.
Chain size
Roller type
DK 11152
R,F,S,M
Pitch
Normal
Heavy duty
A,J
112
(11,500)
K,E
171
(17,500)
Standard attachments
A1K1
N
152.4
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
90
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 11152
R,F,S,M
R,F,S,M
R,S,M
R,F,S,M
7.9
5.5
G4
Y
60
75
70
110
GA2GK2
K
5.8
A2
A3
K2
K3
G4
0.22
0.44
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
239
DK Conveyor Chains
8
15.9
15.9
31
44.4 37.6
31
44.4 37.6
S-roller
44.5
38
38
31.8
P
P
31
44.4 37.6
M-roller
15.9
38
DK Conveyor Chains
34.9
Attachment SA2
K
N
33
75
55
15
33
75
85
55
K
N
24
33
Attachment SK2
75
85
55
Attachment K2
24
85
Standard
Conveyor Chain
Attachment A2
24
N
K
15
55
81
35
100
15
Chain No.
Chain size
Roller type
DK 13101
R,S,M
Pitch
Normal
Heavy duty
A,J
127
(13,000)
K,E
240
(24,500)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
80
80
40
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 13101
R,S,M
R,S,M
R,S,M
9.6
G4
Y
GA2GK2
K
10.0
A2
SA2
A3
K2
SK2
K3
G4
0.31
0.62
Note: The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are suitable
when higher safety rate, strength or wear resistance is required.
240
15.9
4
15.9
36.5
47.1 40.4
36.5
57.2
57.2
45
45
75
M-roller
36.5
15.9
15.9
36.5
47.1 40.4
S-roller
47.1 40.4
38.1
Attachment GA2
Attachment G4
35.5
35.5
26.5
35.5
60
K
Y
X
Attachment GK2
26.5
35.5
35.5
Attachment SK2
82
81
60
Attachment K2
Standard
Conveyor Chain
15
26.5
81
Attachment GA2
82
Attachment A2
K
N
26.5
45
45
34.9
DK Conveyor Chains
47.1 40.4
24
8
R-roller
90
K
N
N
K
6.5
G4-hole
Bolt: M12
55
100
77.5
38
26.5
14
15
15
35.5
26.5
35.5
81
60
82
27
90
6.5
27
14
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
G2-hole
Chain No.
Chain size
Roller type
DK 19152
R,F,S,M
Pitch
Normal
Heavy duty
A,J
186
(19,000)
K,E
279
(28,500)
Standard attachments
A1K1
N
152.4
A2K2
N
K
100
60
SA2SK2
N
K
100
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 19152
R,F,S,M
R,F,S,M
R,S,M
R,F,S,M
12.2
9.1
G4
Y
50
75
70
110
GA2GK2
K
9.4
A2
SA2
A3
K2
SK2
K3
G4
0.41
0.82
0.60
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
241
DK Conveyor Chains
9
9
19.1
4
37.5
52.9 44.6
9
37.5
52.9 44.6
19.1
25
8.5
R-roller
69.9
69.9
50
50
90
M-roller
37.5
19.1
19.1
37.5
52.9 44.6
S-roller
52.9 44.6
44.5
Attachment SA2
Attachment G4
28
28
38.5
Attachment GA2
15
B
Attachment SK2
Attachment GK2
P
28
38.5
38.5
89
100
65
Attachment K2
28
Standard
Conveyor Chain
38.5
89
65
100
Attachment A2
K
N
38.5
50
50
DK Conveyor Chains
40.1
K
N
N
K
6.5
14
G4-hole
Bolt: M12
60
85
110
45
28
15
15
38.5
28
38.5
89
100
65
90
27
90
6.5
27
14
G2-hole
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
Chain No.
Chain size
Roller type
DK 25152
R,F,S,M
Pitch
Normal
Heavy duty
A,J
245
(25,000)
K,E
392
(40,000)
Standard attachments
A1K1
N
152.4
A2K2
N
K
100
60
SA2SK2
N
K
100
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 25152
R,F,S,M
R,F,S,M
R,S,M
R,F,S,M
12.2
9.1
G4
Y
55(35)
75
70
125
GA2GK2
K
9.4
A2
SA2
A3
K2
SK2
K3
G4
0.53
1.06
0.79
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller F.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
242
DK Conveyor Chains
Application examples
Roller
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR,UF
UR
UR,UF
UR
UR,UF
UR,UF
03075
03100
03125
03150
07075
07100
07125
07150
09100
09125
09150
09200
11100
11125
11150
11200
13150
13200
19200
19250
19300
25200
25250
25300
32200
32250
32300
32450
50250
50300
50450
50600
65300
65450
05101
08101
09101
11152
13101
19152
25152
A1
A2
A3
K1
K2
: Standard product
: Nonstandard product
Note: Consult us for manufacturing nonstandard products.
243
Standard attachment
K3
SA1
SA2
SK1
SK2
GA2
GK2
G4
Fixing-proof Roller
DK Conveyor Chains
DK Conveyor Chains
Dimensional Drawings: DK 03075, DK 03100, DK 03125 and DK 03150 (for Metric series)
UF-roller
7.94
30
10.6
3.3
22.2
40
22.2
30
20.4 16.7
3.2
(3)
7.94
3.2 15.9
(3)
20.4 16.7
UR-roller
K
N
11.5
15
11.5
15
Attachment GA2
10
N
K
11.5
35
49
60
20
11.5
10
3.2
(3)
10
15
15
43
46
30
K
N
Attachment GK2
15
15
Attachment SK2
43
46
30
Attachment K2
11.5
Fixing-proof Roller
Attachment SA2
43
30
46
Attachment A2
11.5
DK Conveyor Chains
90
12
G2-hole
Bolt: M6
Bolt length limits
Outer link: 23
Inner link: 16
Chain No.
Chain size
DK
DK
DK
DK
03075
03100
03125
03150
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
34.3
(3,500)
DK
DK
DK
DK
03075
03100
03125
03150
69.6
(7,100)
Standard attachments
A1K1
N
175
100
125
150
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
60
65
75
85
60
65
35
40
50
60
35
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
GA2GK2
K
G4
Y
40
50
60
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR
UR,UF
UR,UF
UR,UF
2.6
2.2
2.0
1.8
2.8
2.4
2.1
1.8
0.05
0.06
0.07
0.08
0.10
0.12
0.14
0.16
Note: 1. Values in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
244
Dimensional Drawings: DK 07075, DK 07100, DK 07125 and DK 07150 (for Metric series)
UF-roller
4.5
(4)
22
4.5
(4)
4.5
(4)
40
11.0
2.5
27.7 23.7
4.5
(4)
22
40
50
32
32
27.7 23.7
11.0
14
4.5
UR-roller
K
N
Attachment GA2
20.5
20.5
15.5
Attachment SA2
50
35
N
K
15.5
40
54
70
22
15.5
20.5
10
4.5
(4)
10
20.5
20.5
50
56
35
K
N
Attachment GK2
15.5
20.5
Attachment SK2
50
56
35
Attachment K2
Fixing-proof Roller
10
15.5
56
Attachment A2
DK Conveyor Chains
15.5
90
16
3
10
Bolt: M8
Bolt length limits
Outer link: 35mm
Inner link: 25mm
G2-hole
Chain No.
Chain size
DK
DK
DK
DK
07075
07100
07125
07150
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
68.6
(7,000)
DK
DK
DK
DK
07075
07100
07125
07150
132
(13,500)
Standard attachments
A1K1
K
175
100
125
150
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
60
65
75
85
65
85
35
40
50
60
40
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
GA2GK2
K
G4
Y
40(34)
50
60
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR
UR,UF
UR,UF
UR,UF
5.6
5.0
4.6
4.2
5.9
5.2
4.8
4.4
0.09
0.10
0.12
0.13
0.18
0.20
0.24
0.26
Note: 1. in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. K values in ( ) for Attachment GA2 and GK2 are for Roller UF.
4. With Attachment GA2 and GK2, check the bolt length limits shown above.
245
DK Conveyor Chains
Dimensional Drawings: DK 09100, DK 09125, DK 09150 and DK 09200 (for Metric series)
UF-roller
12.0
3
12.0
25.6
34.5 29.6
25.6
34.5 29.6
16
5
UR-roller
45
45
32
32
60
19
26
19
26
Attachment GA2
12
N
K
19
45
59
75
25
19
12
12
26
26
57
64
40
K
N
Attachment GK2
26
26
Attachment SK2
57
64
40
Attachment K2
19
Fixing-proof Roller
Attachment SA2
57
40
64
Attachment A2
K
N
19
DK Conveyor Chains
P
90
22
12
G2-hole
Bolt: M10
Bolt length limits
Outer link: 43mm
Inner link: 30mm
Chain No.
Chain size
DK
DK
DK
DK
09100
09125
09150
09200
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
88.2
(9,000)
DK
DK
DK
DK
09100
09125
09150
09200
156
(16,000)
Standard attachments
A1K1
N
100
125
150
200
A2K2
N
K
170
180
190
110
40
50
60
80
A3K3
N
K
SA2SK2
N
K
90
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
GA2GK2
K
G4
Y
35
45
60
80
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR,UF
UR,UF
UR,UF
7.1
6.4
5.8
5.1
7.4
6.6
6.0
5.3
0.16
0.18
0.20
0.22
0.32
0.36
0.40
0.44
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
246
Dimensional Drawings: DK 11100, DK 11125, DK 11150 and DK 11200 (for Metric series)
UF-roller
14.0
3.5
14.0
38
38 32.6
30.6
32.6
20
6.5
UR-roller
50
50
38
38
65
DK Conveyor Chains
28.5
28.5
Attachment GA2
21.5
Attachment SA2
69
50
N
K
21.5
50
71
90
28
21.5
28.5
12
12
28.5
28.5
69
76
50
K
N
Attachment GK2
21.5
28.5
Attachment SK2
69
76
50
Attachment K2
Fixing-proof Roller
12
21.5
76
Attachment A2
K
N
21.5
P
90
22
12
G2-hole
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
Chain No.
Chain size
DK
DK
DK
DK
11100
11125
11150
11200
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
112
(11,500)
DK
DK
DK
DK
11100
11125
11150
11200
225
(23,000)
Standard attachments
A1K1
N
100
125
150
200
A2K2
N
K
170
180
190
110
40
50
60
80
A3K3
N
K
SA2SK2
N
K
70
90
40
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
GA2GK2
K
G4
Y
35
35
60
80
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR
UR,UF
UR,UF
UR,UF
9.6
8.5
7.6
6.5
10.1
8.9
7.9
6.8
0.19
0.21
0.24
0.29
0.39
0.42
0.48
0.58
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
247
DK Conveyor Chains
UF-roller
60
38
38
80
K
N
26.5
35.5
12
35.5
Attachment GK2
K
N
35.5
90
60
81
81
90
60
Attachment K2
26.5
Fixing-proof Roller
Attachment GA2
81
60
90
Attachment A2
26.5
DK Conveyor Chains
15.9
4
47.1 40.4
8
36.5
15.9
47.1 40.4
24
8
UR-roller
12
32
90
22
12
G2-hole
Bolt: M10
Bolt length limits
Outer link: 60mm
Inner link: 40mm
Chain No.
Chain size
Roller type
DK 13150
DK 13200
UR,UF
UR,UF
Pitch
Normal
Heavy duty
A,J
127
(13,000)
K,E
240
(24,500)
Standard attachments
A1K1
K
150
200
A2K2
N
K
90
110
60
80
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
GA2GK2
K
G4
Y
45
80
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
DK 13150
DK 13200
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
10.9
9.3
11.6
9.8
0.39
0.48
0.78
0.96
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
248
UF-roller
15.9
4
15.9
36.5
47.1 40.4
36.5
65
65
45
45
85
Attachment G4
35.5
35.5
35.5
26.5
Attachment GA2
K
Y
Attachment GK2
P
26.5
35.5
35.5
Attachment SK2
82
81
60
Attachment K2
Fixing-proof Roller
15
26.5
K
N
Attachment SA2
82
60
81
Attachment A2
26.5
DK Conveyor Chains
47.1 40.4
24
8
UR-roller
90
14
15
G4-hole
Bolt: M12
55
100
77.5
38
26.5
35.5
26.5
N
K
15
K
N
35.5
81
60
82
6.5
27
90
6.5
27
14
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
G2-hole
Chain No.
Chain size
Roller type
DK 19200
DK 19250
DK 19300
UR,UF
UR,UF
UR,UF
Pitch
Normal
Heavy duty
A,J
K,E
186
(19,000)
279
(28,500)
Standard attachments
A1K1
N
200
250
300
A2K2
N
K
120
170
220
180
125
180
SA2SK2
N
K
120
170
180
125
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
GA2GK2
K
G4
Y
180
125
150
100
100
80
80
125
125
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
DK 19200
DK 19250
DK 19300
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR
UR
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
11.5
10.3
19.5
12.1
10.8
10.0
0.49
0.69
0.89
0.98
1.38
1.78
0.95
1.20
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
249
DK Conveyor Chains
UF-roller
9
9
19.1
5
51.8
59.8 51.7
9
51.8
59.8 51.7
19.1
35.5
12.5
UR-roller
80
80
50
50
105
DK Conveyor Chains
Attachment A2
Attachment G4
Attachment GA2
90
K
N
Fixing-proof Roller
45.5
35
45.5
97
75
107
6.5
27
14
15
Attachment K2
G4-hole
Bolt: M12
B
Attachment GK2
35
45.5
35
45.5
15
K
N
97
107
75
97
107
75
45
90
6.5
27
P
14
Bolt: M12
Bolt length limits
Outer link: 80mm
Inner link: 60mm
G2-hole
Chain No.
Chain size
Roller type
DK 25200
DK 25250
DK 25300
UR,UF
UR,UF
UR,UF
Pitch
Normal
Heavy duty
A,J
K,E
245
(25,000)
392
(40,000)
Standard attachments
A1K1
K
200
250
300
A2K2
N
K
120
170
220
180
125
180
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
GA2GK2
K
G4
Y
170
110
150
100
140
80
80
125
125
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
DK 25200
DK 25250
DK 25300
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
18.2
15.9
14.5
19.5
17.0
15.3
0.63
0.90
1.16
1.26
1.80
2.32
1.05
1.32
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
250
Dimensional Drawings: DK 32200, DK 32250, DK 32300 and DK 32450 (for Metric series)
UF-roller
9
57.6
9
22.2
6
62.8 55.7
9
57.6
100
100
65
65
130
15
K
Y
38
48.5
Attachment GK2
Attachment K2
90
7.5
33
107
80
118
117
80
107
K K
N
15
15
18
G4-hole
Bolt: M16
90
6.5
55
55
27
90
27
14
6.5
38
48.5
P
107
80
118
107
117
80
Attachment K3
K
N
DK Conveyor Chains
Attachment G4
48.5
48.5
107
80
118
K K
N
15
Attachment GA2
Attachment A3
107
80
117
Attachment A2
K
N
38
Fixing-proof Roller
62.8 55.7
22.2
39
13.5
UR-roller
14
G2-hole
G2-hole
Bolt: M12
Bolt length limits
Outer link: 86mm
Inner link: 65mm
Chain No.
Chain size
DK
DK
DK
DK
32200
32250
32300
32450
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
313
(32,000)
DK
DK
DK
DK
32200
32250
32300
32450
500
(51,000)
Standard attachments
A1K1
N
200
250
300
450
A2K2
N
K
120
170
220
330
A3K3
N
K
80
125
180
280
330
140
SA2SK2
N
K
GA2GK2
K
G4
Y
170(40)
110(90)
140
220
100
140
170
180
100
100
125
150
150
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
28.2
24.6
22.0
17.8
30.2
26.2
23.4
18.7
0.72
1.01
1.31
1.97
1.44
2.02
2.62
3.97
0.91
1.48
1.78
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller UF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
251
DK Conveyor Chains
Dimensional Drawings: DK 50250, DK 50300, DK 50450 and DK 50600 (for Metric series)
UF-roller
74.9 68.1
12 67.4 12
25.4
7
74.9 68.1
25.4
125
125
80
80
160
K K
N
Attachment G4
60
60
19
60
46
46
Attachment GK2
60
Attachment K2
136
(146)
151
(161)
P
33
18
19
P
G4-hole
Bolt: M16
90
10
10
33
7.5
70
70
7.5
136
(146)
100
151
(161)
151
(161)
100
136
(146)
K K
N
19
90
K
N
Attachment K3
136
(146)
151
(161)
100
136
(146)
100
151
(161)
136
(146)
151
(161)
100
Fixing-proof Roller
Attachment GA2
Attachment A3
19
46
Attachment A2
K
N
100
DK Conveyor Chains
12 67.4 12
44
15
UR-roller
90
33
18
7.5
18
G2-hole
Bolt: M16
Bolt length limits
Outer link: 105mm
Inner link: 75mm
Chain No.
Chain size
DK
DK
DK
DK
50250
50300
50450
50600
Roller type
UR,UF
UR,UF
UR,UF
UR,UF
Normal
Heavy duty
A,J
K,E
490
(50,000)
DK
DK
DK
DK
50250
50300
50450
50600
686
(70,000)
Standard attachments
A1K1
N
250
300
450
600
A2K2
N
K
170
220
A3K3
N
K
125
180
330
410
140
180
SA2SK2
N
K
GA2GK2
K
G4
Y
190 (55)
140(105)
220
300
140
170
100
100
150
150
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
42.7
38.0
30.3
26.7
45.8
40.4
31.9
28.0
2.26
2.93
4.39
5.45
4.52
5.86
8.78
10.90
1.74
2.07
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller UF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
252
UF-roller
16
75
16
16
28
8
88.8 81.2
16
75
140
140
75
75
180
24
54
72
Attachment GK2
72
154
54
120
173
Attachment K3
154
120
173
Attachment K2
DK Conveyor Chains
72
154
K K
N
24
Attachment G4
Attachment GA2
120
173
154
120
173
Attachment A3
72
Attachment A2
K
N
54
Fixing-proof Roller
88.8 81.2
28
49
16.5
UR-roller
90
K K
N
24
8.5
24
G4-hole
Bolt: M20
13
90
8.5
90
39
22
8.5
22
39
80
80
13
K
N
39
154
120
173
154
120
173
22
G2-hole
Bolt: M20
Bolt length limits
Outer link: 120mm
Inner link: 85mm
Chain No.
Chain size
Roller type
DK 65300
DK 65450
UR,UF
UR,UF
Pitch
Normal
Heavy duty
A,J
637
(65,000)
K,E
882
(90,000)
Standard attachments
A1K1
N
300
450
A2K2
N
K
180
130
330
140
SA2SK2
N
K
GA2GK2
K
G4
Y
120(80)
200
170
100
160
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
DK 65300
DK 65450
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
UR,UF
47.8
37.0
51.2
39.3
3.44
6.30
6.88
12.6
2.81
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller UF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
253
DK Conveyor Chains
4.5
(4)
4.5 22.2
(4)
27.3 23.3
UR-roller
9.7
25.4
38.1
101.6
21
16
Attachment GA2
16
21
40
10
N
K
16
16
21
10
K
40
70
22
57.3
4.5
(4)
10
21
21
21
55
60
40
K
N
Attachment GK2
Attachment SK2
55
60
40
Attachment K2
16
60
K
N
Fixing-proof Roller
Attachment SA2
55
Attachment A2
16
DK Conveyor Chains
101.6
90
16
10
Bolt: M8
Bolt length limits
Outer link: 32mm
Inner link: 25mm
G2-hole
Chain No.
Chain size
Roller type
DK 05101
UR
Pitch
Normal
Heavy duty
A,J
53.9
(5,500)
K,E
98
(10,000)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
70
40
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
GA2GK2
K
G4
Y
45
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
A2
SA2
A3
K2
SK2
K3
G4
DK 05101
UR
UR
UR
UR
4.1
0.72
0.24
Note: 1. Values in ( ) for the plate thickness are for the stainless steel chains. Values for plate thickness without ( ) apply to all types.
2. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
254
UF-roller
11.3
3
11.3
35
35 30.1
27.6
30.1
18
6.5
UR-roller
44.5
44.5
28.6
28.6
60
Attachment SA2
20
27
20
Attachment GA2
Attachment GK2
20
Attachment SK2
K
N
20
27
N
K
12
45
75
28
60.7
12
20
27
64
50
72
72
64
50
27
Attachment K2
20
27
12
Fixing-proof Roller
K
N
27
72
50
64
Attachment A2
DK Conveyor Chains
90
22
12
Bolt: M8
Bolt length limits
Outer link: 35mm
Inner link: 25mm
G2-hole
Chain No.
Chain size
Roller type
DK 08101
UR,UF
Pitch
Normal
Heavy duty
A,J
78.4
(8,000)
K,E
142
(14,500)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
70
40
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
GA2GK2
K
G4
Y
35
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A1,A2
SA2
A3
K1,K2
SK2
K3
G4
DK 08101
UR,UF
UR,UF
UR,UF
UR,UF
6.9
7.3
0.20
0.40
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
255
DK Conveyor Chains
27.6
12.7
36
30.6
UR-roller
32
38.1
DK Conveyor Chains
K
N
20
27
12
Attachment GK2
K
N
20
27
27
62
45
70
70
62
45
Attachment K2
20
Fixing-proof Roller
Attachment GA2
70
45
62
Attachment A2
12
28
90
Bolt: M10
Bolt length limits
Outer link: 43mm
Inner link: 30mm
22
12
G2-hole
Chain No.
Chain size
Roller type
DK 09101
UR
Pitch
Normal
Heavy duty
A,J
88.2
(9,000)
K,E
156
(16,000)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
70
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
GA2GK2
K
G4
Y
40
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
A2
A3
K2
K3
G4
DK 09101
UR
UR
UR
6.4
0.19
0.38
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
256
UF-roller
6
30.8
6
12.7
3
37.6 32.2
6
30.8
50.8
50.8
38
38
65
Attachment G4
28.5
28.5
28.5
50
Attachment GA2
21.5
Attachment SA2
64
Attachment A2
K
N
12
Attachment K2
Attachment SK2
Attachment GK2
21.5
28.5
21.5
64
28.5
P
72
50
Fixing-proof Roller
72
21.5
DK Conveyor Chains
37.6 32.2
12.7
21
7.5
UR-roller
K
N
N
K
5
12
50
71
90
32
21.5
12
12
28.5
21.5
28.5
72
50
64
90
22
G4-hole
Bolt: M10
90
22
12
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
G2-hole
Chain No.
Chain size
Roller type
DK 11152
UR,UF
Pitch
Normal
Heavy duty
A,J
112
(11,500)
K,E
171
(17,500)
Standard attachments
A1K1
N
152.4
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
90
90
60
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
GA2GK2
K
G4
Y
60
75
70
100
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
A3
K2
K3
G4
DK 11152
UR,UF
UR,UF
UR
UR,UF
UR,UF
7.4
7.9
0.22
0.44
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
257
DK Conveyor Chains
31
44.4 37.6
UR-roller
15.9
38
44.5
K
N
24
33
15
33
Attachment SK2
K
N
33
85
55
75
75
85
55
Attachment K2
24
Fixing-proof Roller
Attachment SA2
75
55
85
Attachment A2
24
DK Conveyor Chains
N
K
15
55
81
35
100
15
Chain No.
Chain size
Roller type
DK 13101
UR
Pitch
Normal
Heavy duty
A,J
127
(13,000)
K,E
240
(24,500)
Standard attachments
A1K1
N
101.6
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
80
80
40
40
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
GA2GK2
K
G4
Y
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
A2
SA2
A3
K2
SK2
K3
G4
DK 13101
UR
UR
UR
10.3
0.31
0.62
Note: The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
258
UF-roller
15.9
4
15.9
36.5
47.1 40.4
36.5
57.2
57.2
45
45
75
K
N
Attachment GA2
Attachment G4
35.5
35.5
26.5
35.5
60
15
Attachment K2
Attachment GK2
Attachment SK2
26.5
35.5
26.5
82
35.5
P
81
60
Fixing-proof Roller
81
Attachment SA2
82
Attachment A2
26.5
DK Conveyor Chains
47.1 40.4
24
8
UR-roller
90
K
N
6.5
26.5
14
N
K
15
35.5
26.5
35.5
81
60
82
27
15
G4-hole
Bolt: M12
55
100
38
77.5
90
6.5
27
14
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
G2-hole
Chain No.
Chain size
Roller type
DK 19152
UR,UF
Pitch
Normal
Heavy duty
A,J
186
(19,000)
K,E
279
(28,500)
Standard attachments
A1K1
N
152.4
A2K2
N
K
100
60
SA2SK2
N
K
100
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
GA2GK2
K
G4
Y
50
75
70
110
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
DK 19152
UR,UF
UR,UF
UR
UR,UF
UR,UF
11.8
12.2
0.41
0.82
0.60
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
259
DK Conveyor Chains
UF-roller
9
9
19.1
4
37.5
52.9 44.6
9
37.5
52.9 44.6
19.1
25
8.5
UR-roller
69.9
69.9
50
50
90
Attachment SA2
Fixing-proof Roller
K
N
Attachment G4
28
38.5
Attachment GA2
38.5
38.5
89
65
100
Attachment A2
28
DK Conveyor Chains
15
B
Attachment SK2
Attachment K2
Attachment GK2
38.5
28
38.5
28
27
K
N
38.5
89
100
65
6.5
28
28
38.5
89
100
65
P
90
N
K
G4-hole
Bolt: M12
K
60
85
110
45
14
15
15
90
6.5
27
14
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
G2-hole
Chain No.
Chain size
Roller type
DK 25152
UR,UF
Pitch
Normal
Heavy duty
A,J
245
(25,000)
K,E
392
(40,000)
Standard attachments
A1K1
N
152.4
A2K2
N
K
100
60
SA2SK2
N
K
100
60
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
A3K3
N
K
GA2GK2
K
G4
Y
55(35)
75
70
125
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
UR-roller
UF-roller
A2
SA2
A3
K2
SK2
K3
G4
DK 25152
UR,UF
UR,UF
UR
UR,UF
UR,UF
11.8
12.2
0.53
1.06
0.79
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller UF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
260
DK Conveyor Chains
DK Conveyor Chains
Application examples
Conveyors with extensive center distance.
Conveyors that need to have smooth movement
and high precision
Assembly line of automobiles
Bearing Assembled
Roller Type
Conveyor Chain
11100
11125
11150
11200
13150
13200
19200
19250
19300
25200
25250
25300
32200
32250
32300
32450
50250
50300
50450
11152
19152
25152
A1
A2
A3
K1
K2
Standard attachment
K3
SA1
SA2
: Standard product
: Nonstandard product
Note: Consult us for manufacturing nonstandard products.
261
SK1
SK2
GA2
GK2
DK Conveyor Chains
Dimensional Drawings: DK 11100, DK 11125, DK 11150, and DK 11200 (for Metric series)
BF-roller
6
30.6
14.0
38 32.6
6
30.6
32.6
38
14.0
20.5
6.5
BR-roller
50
50
K
N
19
26
21.5
28.5
Attachment GA2
12
N
K
21.5
50
71
90
28
21.5
12
12
28.5
28.5
69
76
50
K
N
Attachment GK2
28.5
28.5
Attachment SK2
69
76
50
Attachment K2
21.5
Bearing Assembled
Roller Type
Conveyor Chain
Attachment SA2
69
50
76
Attachment A2
21.5
DK Conveyor Chains
38
38
65
90
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
22
P
12
G2-hole
Chain No.
Chain size
DK
DK
DK
DK
11100
11125
11150
11200
Roller type
BR,BF
BR,BF
BR,BF
BR,BF
Normal
Heavy duty
A,J
K,E
112
(11,500)
DK
DK
DK
DK
11100
11125
11150
11200
225
(23,000)
Standard attachments
A1K1
N
100
125
150
200
A2K2
N
K
70
80
90
110
40
50
60
80
A3K3
N
K
SA2SK2
N
K
70
90
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR
BR
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
9.6
8.5
7.6
6.5
10.1
8.9
7.9
6.8
40
60
GA2GK2
K
G4
Y
35
35
60
80
A3
K2
SK2
K3
G4
BR
BF
0.19
0.21
0.24
0.29
0.39
0.42
0.48
0.58
315
235
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
262
BF-roller
Center line of sprocket
Center line of chain
8
36.5
15.9
60
15.9
47.1 40.4
36.5
47.1 40.4
24
8
BR-roller
60
38
38
80
26.5
35.5
81
26.5
35.5
Attachment GK2
81
90
60
90
60
Bearing Assembled
Roller Type
Conveyor Chain
12
Attachment K2
12
K
N
26.5
35.5
60
90
K
N
Attachment GA2
81
Attachment A2
DK Conveyor Chains
32
90
22
P
12
Bolt: M10
Bolt length limits
Outer link: 60mm
Inner link: 40mm
G2-hole
Chain No.
Chain size
Roller type
DK 13150
DK 13200
BR,BF
BR,BF
Pitch
Normal
Heavy duty
A,J
127
(13,000)
K,E
240
(24,500)
P
150
200
Standard attachments
A2K2
N
K
90
110
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
60
80
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 13150
DK 13200
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
10.9
9.3
11.6
9.8
GA2GK2
K
G4
Y
45
80
A3
K2
SK2
K3
G4
BR
BF
0.39
0.48
0.78
0.96
440
330
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
263
DK Conveyor Chains
BF-roller
65
15.9
15.9
36.5
47.1 40.4
47.1 40.4
24
8
BR-roller
45
45
85
K
N
26.5
35.5
26.5
35.5
Attachment GA2
15
N
K
26.5
55
100
90
27
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
6.5
77.5
38
26.5
15
15
35.5
35.5
82
81
60
K
N
Attachment GK2
35.5
35.5
Attachment SK2
82
81
60
Attachment K2
26.5
Bearing Assembled
Roller Type
Conveyor Chain
Attachment SA2
82
60
81
Attachment A2
26.5
DK Conveyor Chains
P
14
G2-hole
Chain No.
Chain size
Roller type
DK 19200
DK 19250
DK 19300
BR,BF
BR,BF
BR,BF
Pitch
Normal
Heavy duty
A,J
K,E
186
(19,000)
279
(28,500)
Standard attachments
A1K1
N
200
250
300
A2K2
N
K
120
170
220
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
80
125
180
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 19200
DK 19250
DK 19300
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR
BR
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
11.5
10.3
9.5
12.1
10.8
10.0
SA2SK2
N
K
120
170
80
125
GA2GK2
K
G4
Y
80
125
150
A3
K2
SK2
K3
G4
BR
BF
0.49
0.69
0.89
0.98
1.38
1.78
475
355
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
264
BF-roller
51.8
19.1
5
35.5
12.5
59.8 51.7
9
51.8
59.8 51.7
19.1
80
BR-roller
80
50
50
105
Attachment GA2
K
N
35
45.5
97
75
45.5
97
107
75
K
N
35
45.5
Attachment GK2
97
107
75
Attachment K2
Bearing Assembled
Roller Type
Conveyor Chain
15
35
107
Attachment A2
DK Conveyor Chains
15
45
90
6.5
27
P
14
Bolt: M12
Bolt length limits
Outer link: 80mm
Inner link: 60mm
G2-hole
Chain No.
Chain size
Roller type
DK 25200
DK 25250
DK 25300
BR,BF
BR,BF
BR,BF
Pitch
Normal
Heavy duty
A,J
K,E
245
(25,000)
392
(40,000)
Standard attachments
A1K1
N
200
250
300
A2K2
N
K
120
170
220
SA2SK2
N
K
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
80
125
180
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 25200
DK 25250
DK 25300
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
18.2
15.9
14.5
19.5
17.0
15.3
GA2GK2
K
G4
Y
70
110
150
A3
K2
SK2
K3
G4
BR
BF
0.63
0.90
1.16
1.26
1.80
2.32
845
635
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
265
DK Conveyor Chains
Dimensional Drawings: DK 32200, DK 32250, DK 32300, and DK 32450 (for Metric series)
BF-roller
9
57.6
9
22.2
22.2
62.8 55.7
9
57.6
62.8 55.7
39
13.5
BR-roller
100
100
65
65
130
Attachment GA2
38
48.5
107
118
K K
N
15
15
Attachment GK2
Attachment K2
38
48.5
Bearing Assembled
Roller Type
Conveyor Chain
K
N
Attachment A3
107
80
117
Attachment A2
80
DK Conveyor Chains
38
48.5
107
80
118
107
117
80
Attachment K3
K
N
107
80
118
117
80
107
K K
N
15
15
90
Bolt: M12
Bolt length limits
Outer link: 86mm
Inner link: 65mm
6.5
55
55
27
14
G2-hole
Chain No.
Chain size
DK
DK
DK
DK
32200
32250
32300
32450
Roller type
BR,BF
BR,BF
BR,BF
BR,BF
Normal
Heavy duty
A,J
K,E
313
(32,000)
DK
DK
DK
DK
32200
32250
32300
32450
500
(51,000)
Standard attachments
A1K1
N
200
250
300
450
120
170
220
A2K2
N
K
330
140
A3K3
N
K
SA2SK2
N
K
GA2GK2
K
G4
Y
70(40)
110(90)
140
220
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
28.2
24.6
22.0
17.8
30.2
26.2
23.4
18.7
A3
K2
SK2
K3
G4
BR
BF
0.72
1.01
1.31
1.97
1.44
2.02
2.62
3.97
1,240
930
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller BF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
5. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
266
Dimensional Drawings: DK 50250, DK 50300, DK 50450, and DK 50600 (for Metric series)
BF-roller
25.4
125
12 67.4 12
44
15
125
74.9 68.1
25.4
12 67.4 12
74.9 68.1
BR-roller
80
80
160
60
136
(146)
100
151
(161)
136
(146)
151
(161)
100
K K
N
19
19
Attachment GK2
Attachment K2
46
60
K
N
Attachment GA2
Attachment A3
Bearing Assembled
Roller Type
Conveyor Chain
Attachment A2
DK Conveyor Chains
46
46
60
136
(146)
100
151
(161)
136
(146)
151
(161)
100
Attachment K3
K K
N
19
19
90
10
33
7.5
70
70
10
K
N
136
(146)
100
151
(161)
100
136
(146)
151
(161)
18
Bolt: M16
Bolt length limits
Outer link: 105mm
Inner link: 75mm
Chain No.
Chain size
DK
DK
DK
DK
50250
50300
50450
50600
Roller type
BR,BF
BR,BF
BR,BF
BR,BF
Normal
Heavy duty
A,J
K,E
490
(50,000)
DK
DK
DK
DK
50250
50300
50450
50600
686
(70,000)
P
250
300
450
600
Standard attachments
A2K2
N
K
170
220
125
180
A3K3
N
K
330
410
140
180
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
Chain size
Pitch
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR,BF
BR-roller BF-roller
42.7
38.0
30.3
26.7
45.8
40.4
31.9
28.0
SA2SK2
N
K
GA2GK2
K
G4
Y
90 (55)
140(105)
220
300
A3
K2
SK2
K3
G4
BR
BF
2.26
2.93
4.39
5.45
4.52
5.86
18.78
10.90
1,695
1,265
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) for Attachment GA2 and GK2 are for Roller BF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Attachment A3 and K3 are angle welding attachments.
5. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
267
DK Conveyor Chains
BF-roller
6
30.8
50.8
50.8
12.7
3
37.6 32.2
6
30.8
37.6 32.2
12.7
21
7.5
BR-roller
38
38
65
K
N
21.5
28.5
28.5
21.5
Attachment GA2
12
N
K
21.5
50
71
90
32
21.5
12
12
28.5
28.5
64
72
50
K
N
Attachment GK2
28.5
28.5
Attachment SK2
64
72
50
Attachment K2
21.5
Bearing Assembled
Roller Type
Conveyor Chain
Attachment SA2
64
50
72
Attachment A2
21.5
DK Conveyor Chains
90
22
12
Bolt: M10
Bolt length limits
Outer link: 49mm
Inner link: 35mm
G2-hole
Chain No.
Chain size
Roller type
DK 11152
BR,BF
Pitch
Normal
Heavy duty
A,J
112
(11,500)
K,E
171
(17,500)
P
152.4
Standard attachments
A2K2
N
K
A3K3
N
K
SA2SK2
N
K
90
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
60
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 11152
BR,BF
BR,BF
BR
BR,BF
BR-roller BF-roller
7.4
7.9
GA2GK2
K
G4
Y
60
A3
K2
SK2
K3
G4
BR
BF
0.22
0.44
335
245
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
268
BF-roller
15.9
15.9
47.1 40.4
36.5
47.1 40.4
24
8
BR-roller
57.2
57.2
45
45
75
K
N
26.5
Attachment GA2
35.5
35.5
60
N
K
15
26.5
26.5
35.5
35.5
26.5
35.5
35.5
82
81
60
K
N
Attachment GK2
Attachment SK2
82
81
60
Attachment K2
Bearing Assembled
Roller Type
Conveyor Chain
15
26.5
81
Attachment SA2
82
Attachment A2
DK Conveyor Chains
26.5
15
55
100
38
77.5
90
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
6.5
27
14
G2-hole
Chain No.
Chain size
Roller type
DK 19152
BR,BF
Pitch
Normal
Heavy duty
A,J
186
(19,000)
K,E
279
(28,500)
P
152.4
Standard attachments
K
A2K2
N
K
100
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
60
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 19152
BR,BF
BR,BF
BR
BR,BF
BR-roller BF-roller
11.8
12.2
SA2SK2
N
K
100
60
GA2GK2
K
G4
Y
50
A3
K2
SK2
K3
G4
BR
BF
0.41
0.82
420
315
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. With Attachment GA2 and GK2, check the bolt length limits shown above.
3. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
269
DK Conveyor Chains
BF-roller
37.5
19.1
4
25
8.5
52.9 44.6
9
37.5
52.9 44.6
19.1
69.9
69.9
BR-roller
50
50
90
Attachment SA2
28
28
38.5
Attachment GA2
15
Attachment SK2
K
N
N
K
28
60
85
110
45
28
38.5
15
15
Attachment GK2
38.5
38.5
38.5
89
100
65
89
100
65
Attachment K2
28
Bearing Assembled
Roller Type
Conveyor Chain
38.5
89
65
100
Attachment A2
K
N
28
DK Conveyor Chains
90
6.5
27
14
Bolt: M12
Bolt length limits
Outer link: 63mm
Inner link: 45mm
G2-hole
Chain No.
Chain size
Roller type
DK 25152
BR,BF
Pitch
Normal
Heavy duty
A,J
245
(25,000)
K,E
392
(40,000)
P
152.4
Standard attachments
K
A2K2
N
K
100
Approx. weight
kg/m
Combination of
standard attachments and rollers
Chain No.
60
A3K3
N
K
Chain size
Roller type
A1
K1
A2
K2
A3
K3
SA2
SK2
GA2
GK2
G4
DK 25152
BR,BF
BR,BF
BR
BR,BF
BR-roller BF-roller
11.8
12.2
SA2SK2
N
K
100
60
GA2GK2
K
G4
Y
55(35)
A3
K2
SK2
K3
G4
BR
BF
0.53
1.06
545
400
Note: 1. The dimensions of the normal and heavy duty chains are the same, but heavy duty chains are made of high-strength and structural steel, and are
suitable when higher safety rate, strength or wear resistance is required.
2. K values in ( ) Attachment GA2 and GK2 are for Roller BF.
3. With Attachment GA2 and GK2, check the bolt length limits shown above.
4. Roller allowable load depends on the tension resistance of the rail. The values in the table were calculated with a rail made of a material with 400kN/mm2.
270
DK Conveyor Chains
Seal Chain
Seal Chain
By placing a seal ring between the inner and outer
plates, this conveyor chain has grease enclosed
between the pins and bushings. Chain endurance is
significantly improved with this design as friction
between the pins and the bushings is substantially
lowered.
Heat resistance of seal rings is approx. 80C.
Sprockets for Standard Conveyor Chains can be
used.
Various attachments are available upon request.
Un-greased
product
Greased
product
Seal Chain
(Tested by DAIDO)
Operating hours (Hrs)
By lubricating the Seal Chain from time to time, chain life can be further lengthened and the effects of rust
resistance can be expected as well. Applicable lubrication oil: SAE30 to SAE40
Do not use gasoline, phosphate ester hydraulic fluids, and chemicals such as benzol, trichlene, and acetone, as
they may damage the seal rings.
271
Seal Chain
DK Conveyor Chains
Application examples
DK Conveyor Chains
Seal Chain
Seal Chain
DK Conveyor Chains
Chain No.
Chain size
Roller type
DK 19200V R,F,S,M
DK 19250V R,F,S,M
R-roller
F-roller
S-roller
M-roller
K,E
F-roller
R
S-roller M-roller
e
Pin
D
L1
Plate
L2
200
186
250
250 36.5
(19,000) (25,500)
65
65
85
24
Approx. weight
kg/m
45
11.6 12.2
8.5
8.7
10.4 10.9
8.0
8.2
7.6
7.9
DK 19300V R,F,S,M
300
9.6 10.1
DK 25200V R,F,S,M
200
DK 25250V R,F,S,M
245
353
250 51.8
(25,000) (36,000)
80
80
105 35.5
DK 25300V R,F,S,M
300
DK 19152V R,F,S,M
186
250
152.4 36.5 57.2 57.2
(19,000) (25,500)
75
24
DK 25152V R,F,S,M
245
353
152.4 37.5 69.9 69.9
(25,000) (36,000)
90
25
50
45
11.9 12.3
50
Note: 1. The avg. tensile strength of a heavy duty chain is about 90% of that of the Standard Multipurpose Conveyor Chain.
2. Sprockets for Standard Conveyor Chain can be used.
3. The heat resistance of the seal rings is about 80C.
4. Consult us for sizes not mentioned above, heat resistance higher than 80C, or other options like adding grease holes to pins.
5. Ask us for delivery time.
272
9.2
9.5
DK Conveyor Chains
Application examples
Large flow conveyor systems
Basket elevators
Multilevel parking machines
135H200
135H250
150H200
150H225
150H250
150H300
175H200
175H250
175H300
175H350
100H250
100H300
100H350
120H250
120H300
120H350
120H400
140H300
140H350
140H400
160H300
160H350
160H400
200H350
200H400
200H450
250H350
250H400
250H500
135Z200
135Z250
150Z200
150Z225
150Z250
150Z300
175Z200
175Z250
175Z300
175Z350
100Z250
100Z300
100Z350
120Z250
120Z300
120Z350
120Z400
140Z300
140Z350
140Z400
160Z300
160Z350
160Z400
200Z350
200Z400
200Z450
250Z350
250Z400
250Z500
Standard
attachment
G4
: Standard product
: Nonstandard product
Note: Consult us for manufacturing nonstandard products or attachments not included in the above table.
273
Strong H-type
and Z-type
Conveyor Chain
DK Conveyor Chains
DK Conveyor Chains
Strong H-type
and Z-type
Conveyor Chain
DK Conveyor Chains
Strong H-type
kN
kgf
DK 135H200M
323
(33,000)
DK 135H250M
DK 150H250M
P
200
250
Roller link
Roller M
width
Pin
Plate
L1
L2
151.8
144.5
22.20
114.0
153.8
160.2
19
150
200
DK 150H200M
DK 150H225M
Pitch
490
(50,000)
225
250
Approx.
weight
kg/m
12.2
11.2
17.0
157.6
150.8
25.40
121.5
157.3
164.2
19
165
16.2
15.5
DK 150H300M
300
14.5
DK 175H200M
200
30.0
DK 175H250M
DK 175H300M
735
(75,000)
250
300
DK 175H350M
350
DK 100H250M
250
DK 100H300M
DK 100H350M
980
(100,000)
DK 120H250M
DK 120H300M
DK 120H350M
1,176
(120,000)
300
DK 160H350M
DK 160H400M
DK 200H350M
DK 200H400M
DK 200H450M
DK 250H350M
DK 250H400M
DK 250H500M
1,569
(160,000)
1,961
(200,000)
2,451
(250,000)
170.0
178.0
12
180
27.0
25.0
23.7
41.2
1 75.0
170.0
35.00
174.0
183.2
190.8
16
190
38.2
48.6
300
350
300
DK 160H300M
148.0
35.9
DK 140H300M
DK 140H400M
31.75
250
400
1,372
(140,000)
163.5
350
DK 120H400M
DK 140H350M
167.4
350
182.5
175.0
38.50
183.5
188.0
195.5
16
100
54.2
185.0
182.0
41.75
189.5
190.2
199.3
16
115
66.9
192.5
186.0
44.50
211.5
101.2
110.3
19
120
400
62.8
58.9
350
76.1
195.0
197.0
50.80
217.5
103.5
114.0
19
140
450
71.9
68.3
350
400
50.5
47.8
300
400
41.8
39.9
400
350
44.8
99.0
100.0
107.0
450
56.00
236.0
113.0
123.0
22
150
90.0
77.4
Note: 1. See the section of Chain for Continuous Flow Conveyor in the DK Specialty Conveyor Chain for the dimensions of the
attachments for the flow conveyor.
2. Consult us for manufacturing other attachments and roller types.
274
kN
kgf
DK 135Z200M
392
(40,000)
DK 135Z250M
DK 150Z250M
P
200
250
Roller link
Roller M
width
W
L1
L2
H1
Approx.
weight
H2 kg/m
151.8
144.5
22.20
114.0
153.8
160.2
19
150
157
Pin
Plate
200
DK 150Z200M
DK 150Z225M
Pitch
588
(60,000)
225
250
12.7
11.7
17.7
157.6
150.8
25.40
121.5
157.3
164.2
19
165
175
16.9
16.2
DK 150Z300M
300
15.2
DK 175Z200M
200
31.2
DK 175Z250M
DK 175Z300M
931
(95,000)
250
300
DK 175Z350M
350
DK 100Z250M
250
DK 100Z300M
DK 100Z350M
1,225
(125,000)
DK 120Z250M
DK 120Z300M
DK 120Z350M
1,470
(150,000)
300
DK 160Z350M
DK 160Z400M
DK 200Z350M
DK 200Z400M
DK 200Z450M
DK 250Z350M
DK 250Z400M
DK 250Z500M
1,863
(190,000)
2,255
(230,000)
2,843
(290,000)
170.0
178.0
12
180
190
28.0
26.0
24.6
42.5
175.0
170.0
35.00
174.0
183.2
190.8
16
190
100
39.5
50.6
300
350
300
DK 160Z300M
148.0
37.2
DK 140Z300M
DK 140Z400M
31.75
250
400
1,667
(170,000)
163.5
350
DK 120Z400M
DK 140Z350M
167.4
350
182.5
175.0
38.50
183.5
188.0
195.5
16
100
115
55.5
185.0
182.0
41.75
189.5
190.2
199.3
16
115
125
51.8
49.1
300
68.4
192.5
186.0
44.50
211.5
101.2
110.3
19
120
130
400
63.8
60.3
350
400
43.7
41.6
400
350
46.8
77.5
195.0
197.0
50.80
217.5
103.5
114.0
19
140
150
73.3
450
70.0
350
101.60
400
100.0
107.0
56.00
450
236.0
113.0
123.0
22
150
165
92.5
79.8
275
Strong H-type
and Z-type
Conveyor Chain
DK Conveyor Chains
Strong Z-type
DK Conveyor Chains
90 (60: 0=26)
Strong H-type
and Z-type
Conveyor Chain
DK Conveyor Chains
G4-hole
Chain No.
Bolt
6.5
45.5
57
M12
Attachment
weight
kg
DK
35Z200M
200
100
80
125
DK
35Z250M
250
140
100
150
DK
50Z200M
200
100
80
125
DK
50Z225M
225
120
80
125
DK
50Z250M
250
140
100
150
DK
50Z300M
300
170
100
150
1.80
DK
75Z200M
200
100
80
125
0.92
DK
75Z250M
250
140
100
150
DK
75Z300M
300
170
100
150
DK
75Z350M
350
225
100
150
DK 100Z250M
250
140
100
DK 100Z300M
300
170
DK 100Z350M
350
DK 120Z250M
14
27
1.04
1.65
0.92
18
33
7.5
18
33
7.5
150
18
33
7.5
120
180
22
39
8.5
225
120
180
22
39
250
140
120
180
18
DK 120Z300M
300
170
120
180
DK 120Z350M
350
225
120
DK 120Z400M
400
260
DK 140Z300M
300
170
DK 140Z350M
350
225
DK 140Z400M
400
260
DK 160Z300M
300
170
DK 160Z350M
350
225
DK 160Z400M
400
260
DK 200Z350M
350
200
DK 200Z400M
400
260
DK 200Z450M
450
290
DK 250Z350M
350
200
DK 250Z400M
400
260
DK 250Z500M
500
320
12
48.5
60
75
90
M16
M16
1.04
1.50
1.75
2.10
2.45
M16
2.40
M20
3.66
8.5
M20
4.20
33
7.5
M16
2.80
22
39
8.5
M20
3.30
180
22
39
8.5
M20
3.85
140
210
22
39
8.5
M20
5.68
140
210
26
42.2
16
16
72
76
100
115
3.90
14
16
77
125
M24
4.48
5.04
4.38
140
210
26
42.2
14
19
87
130
M24
5.04
5.68
6.51
180
250
26
42.2
14
19
88.5
150
M24
7.44
8.37
6.37
180
250
26
42.2
14
22
97
165
M24
7.36
8.35
276
DK Conveyor Chains
Application examples
Conveyor lines for loads such as lumber and shaped steel in industrial plants like steel mills
Assembly lines for automobiles etc.
Pallets and conveyor lines for bulk containers.
DK-HL03075R
DK-HL03100R
DK-HL03125R
DK-HL07075R
DK-HL07100R
DK-HL07125R
DK-HL09100R
DK-HL09125R
DK-HL09150R
DK-HL11100R
DK-HL11125R
DK-HL11150R
DK-HL19200R
DK-HL19250R
DK-HL19300R
DK-HL25200R
DK-HL25250R
DK-HL25300R
DK-HL32200R
DK-HL32250R
DK-HL32300R
DK-HL50250R
DK-HL50300R
DK-HL50450R
kN
kgf
kN
34.3
3,500
69.3
68.6
7,000 132
88.2
9,000 156
112
11,500 225
186
19,000 279
245
25,000 392
313
32,000 500
490
50,000 686
kgf
Roller
Plate
Chain
Pitch Width
Diameter Width height Thickness Height Height
P
75
7,100 100
125
75
13,500 100
125
100
16,000 125
150
100
23,000 125
150
200
28,500 250
300
200
40,000 250
300
200
51,000 250
300
250
70,000 300
450
Unit (mm)
Roller allowable load
Avg.
kN/pc.
(kgf/pc.)
weight
Pin
H1
H2
14.6 36
3.2
3
21
40
19
44
4.5
4
24
11
23.7 27.7
0.98 1.56
100160
25.6
45
22
50.5
28
6.5 12
29.6 34.5
1.37 2.25
140230
30.6
50
27
56
31
14
32.6 38.0
1.76 2.94
180300
36.5
65
32
74.5
42
9.5 15.9
40.4 47.1
2.45 4.11
250420
51.8
80
46
90
50
15
19.1
51.7 59.8
4.31 7.15
440730
57.6 100
51
107
57
17
22.2
55.7 62.8
5.39 8.92
550910
67.4 125
58
132.5
12
70
22.5 25.4
68.1 74.9
4.5
25
9.7
23.3 27.3
7.45 12.3
1,260
760
0.98 1.66
5.1
100170
1.27 2.15
8.4
130220
1.66 2.84
8.6
170290
2.05 3.43
210350 12.0
2.45 4.07
250410 13.8
3.04 5.09
310520 19.6
15.9
30
22.0
L1
L2
Normal/ kg/m
J-type Heavy
duty
DK-HL05101R
53.9
5,500
98
38.1
19
44
DK-HL08101R
78.4
8,000 142
44.5
24
50.2
28
6.2 11.3
30.1 35.0
DK-HL11152R
112
11,500 171
50.8
27
56.4
31
6.4 12.7
32.2 37.6
DK-HL13101R
127
13,000 240
44.5
27
53.5
31
3.5 15.9
37.6 44.4
DK-HL19152R
186
19,000 279
57.2
32
65.5
37
5.6 15.9
40.4 47.1
DK-HL25152R
245
25,000 392
69.9
33
79.9
45
19.1
44.6 52.9
Note: 1. T values in ( ) are for stainless steel type. Values in columns without ( ) apply to all types.
2. Pins of DK-HL03075~DK-HL-03125R are rivet shaped excluding the connecting parts.
3. Ask us for delivery time.
277
10
0.53 0.88
55 90
3.2
2.7
2.5
6.2
5.6
5.2
8.4
7.6
7.0
10.9
9.7
8.8
14.2
12.9
12.1
22.2
19.8
18.3
32.1
28.4
25.7
49.0
44.2
36.3
Chain No.
DK Conveyor Chains
DK Conveyor Chains
For ordering
Specify the chain number and the interval between the chain and the side roller.
When modifying plates into specific shapes for attaching devices like docks or top-plates.
When it is impossible to support the chain load at the center of the roller
To steadily convey loads with high gravitational center.
When attaching uplift guides prevention on chains.
Conveyor Chain
with Side Roller
DK Conveyor Chains
Application examples
Rail gage
Unit (mm)
Chain No.
P
DK 03075S-SR
DK 03100S-SR
DK 05101S-SR
DK 07075S-SR
DK 07100S-SR
DK 07150S-SR
DK 08101S-SR
DK 11100S-SR
DK 11150S-SR
DK 19152S-SR
DK 19200S-SR
DK 19250S-SR
DK 25200S-SR
DK 25250S-SR
DK 25300S-SR
DK 32200S-SR
DK 32250S-SR
DK 32300S-SR
DK 50250S-SR
DK 50300S-SR
DK 50450S-SR
75
100
101.6
75
100
150
101.6
100
150
152.4
200
250
200
250
300
200
250
300
250
300
450
Side roller
Plate
Approx.
additional
gage weight per
side rollerkg
Rail
G
.0
76
38
40
0.3
15.9
15.9
3.2
22.2
30
40
12
20.1
22.2
4.5
25.4
40
50
15.0
102
55
57
0.6
22.2
22.0
4.5
32.0
40
50
15.0
102
55
57
0.6
22.2
27.6
45
60
70
72
0.8
30.6
50
65
16.0
.0
20
120
28.8
28.6
.0
38
133
75
77
1.2
34.9
36.5
60
80
92
94
1.8
36.5
65
85
24.0
.0
24
165
34.9
45.0
.0
45
165
92
94
2.0
40.1
51.8
50.0
65
85
24.0
186
112
114
2.0
44.5
57.6
65.0
80
100
35.5
222
124
126
4.8
50.8
67.4
12
80.0
100
125
39.0
260
150
152
8.4
Note: 1. The basic specifications of the chain are identical to that of Standard Multipurpose Conveyor Chain.
2. Ask us for delivery time.
278
DK Conveyor Chains
Conveyance
Stock
Conveyor Chain
with Top Roller
Conveyance
DK Conveyor Chains
Feeding direction
TR1 type
TR2 Type
279
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
As shown in the photo, a chain with blades is operated in a powder to cause the powder to flow in the same direction
as the feeding direction of the chain. This is called a Continuous Flow Conveyor Chain. The same type of chain is also
used in a similar way for discharging the dust generated by various dust collectors. We manufacture 25 types of
Standard Conveyor Chains with blades, two types of Block Chains with blades (P.284), respectively suitable for the
various properties of dusts and powders, and five chains with special cast steel blades for conveying powders likely to
cause wear. The respective chains are designated as follows:
We manufacture continuous flow conveyors and dust conveyors using the above chains with blades as standard
equipment. Consult us for further details.
280
Shape
Application
For the conveyance of bulk materials
such as grain like wheat and powder
like cement.
Unit (mm)
Chain No.
DK 09101S
DK 19152S
DK 25200S
Standard
DK 19200S
DK 32200S
U-150
U-200
U-270
U-350
U-270
U-350
U-430
U-350
U-430
U-500
U-500
U-600
U-430
U-430
U-500
U-600
U-500
U-600
U-700
U-600
U-700
U-700
U-700
88.2 9,000
186 19,000
Pin
L1
L2
26.5 12.7
34.9 15.9
30.6
40.4
36
47.1
186
19,000
36.5
34.9 15.9
40.4
47.1
245
25,000
51.8
40.1 19.1
51.7
59.8
313
32,000
57.6
44.5 22.2
55.7
62.8
Approx. weight
Approx. weight Approx. weight
Plate
without Attachment with Attachment with Attachment
attachment
B
L or KL
T H kg/m
X
Y
kg/m
kg/m
60
7.2
6.5
6 32 5.4 135
80
11.6
11.2
8 45 9.1 175
245 110
12.4
11.5
8 45 8.4
325 140
15.5
12.7
245 110
15.2
14.6
18.5
15.7
9 50 11.4 325 140
400 170
20.5
16.8
325 140
22.5
22.6
9 65 15.5
400 170
24.5
23.6
25.6
23.5
9 65 14.4 470 200
35.0
34.0
12 80 24.1 470 200
33.8
33.1
12 80 22.4 570 240
26.1
22.4
9 65 17.0 400 170
39.0
35.3
12 80 30.0 400 170
37.9
36.9
12 80 27.0 470 200
36.4
37.3
12 80 25.0 570 240
51.9
51.0
16 90 41.2 470 200
49.5
50.3
16 90 38.2 570 240
50.2
49.7
16 90 35.9 670 280
55.8
59.9
16 100 44.8 570 240
56.0
55.5
16 100 41.8 670 280
64.5
64.0
16 115 50.5 670 280
74.0
78.1
19 120 62.8 670 280
Strong H type
DK 32250S
313 32,000 500 51,000 250
57.6 44.5 22.2
55.7 62.8
DK 50250S
490 50,000 686 70,000 250
67.4 50.8 25.4
68.1 74.9
DK 50300S
490 50,000 686 70,000 300
67.4 50.8 25.4
68.1 74.9
DK 50H200M
490 50,000 200
57.6 50.8 25.4
57.3 64.2
DK 75H200M
735 75,000 200
67.4 63.5 31.75 70
78
DK 75H250M
735 75,000 250
67.4 63.5 31.75 70
78
DK 75H300M
735 75,000 300
67.4 63.5 31.75 70
78
DK 100H250M
980 100,000 250
75.0 70.0 35
83.2 90.8
DK 100H300M
980 100,000 300
75.0 70.0 35
83.2 90.8
DK 100H350M
980 100,000 350
75.0 70.0 35
83.2 90.8
DK 120H300M
1,176 120,000 300
82.5 75.0 38.5
88
95.5
DK 120H350M
1,176 120,000 350
82.5 75.0 38.5
88
95.5
DK 140H350M
1,372 140,000 350
85.0 82.0 41.75 90.2 99.3
DK 160H350M
1,569 160,000 350 92.5 86.0 44.5 101.2 110.3
Note: 1. Chains marked with should not be used for the conveyance of materials causing wear and the conveyance of loads with frequently fluctuating volume.
2. Ask us for the delivery time.
281
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
KL
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
Indication
1. An attachment is indicated by a hyphen added after
the symbol of tensile strength grade. However, in the
case of a strong type conveyor chain, an attachment
is indicated by adding a hyphen after the roller type.
Example) DK19152S-K-L
3. When an attachment has a steel sheet or rib, etc. as
an accessory, "1" is added at the end.
Shape of attachment
Tensile strength grade
Roller type
Nominal chain number
Example) DK19152S-E-B1
DK75H200M-KB1
DK75H200M-L
Shape of attachment
Roller type
Nominal chain number
282
DK 19152S
DK 19200S
DK 25200S
DK 32200S
Plate
T
152.4
36.5
34.9 15.9
45
200.0
36.5
34.9 15.9
45
200.0
51.8
40.1 19.1
50
200.0
57.6
44.5 22.2
65
80
175
11.5
12.2
245 110
13.3
15.7
245 110
16.8
19.0
325 140
21.5
23.3
325 140
25.8
Specialized
Application
Conveyor Chain
Chain No.
Pitch
Unit (mm)
Chain No.
Type of DK
dust conveyor
Pitch
P
DU-200S
DU-200S
LDU-200S
279
LDU-200S
152.4
36.5
DK 19152M
28,500
DU-250S
DU-250S
LDU-250S
LDU-250S
DU-310S
392
DU-310S
200
51.8
DK 25200M
40,000
LDU-310S
LDU-310S
Note: 1. The blade dimensions (X, Y) can be changed upon request.
Plate
T
Blade width
X
185
38.1
15.9
45
230
44.5
19.1
50
283
290
Approx. weightkg/m
With Attachment With Attachment
KL
KUL
11.2
11.2
12.2
12.2
15.0
15.0
DK Specialty
Conveyor Chains
Unit (mm)
12.6(Y=65)13.8(Y=90)
12.6(Y=65)13.8(Y=90)
13.9(Y=65)17.0(Y=110)
13.9(Y=65)17.0(Y=110)
20.0(Y=110)22.2(Y=140)
20.0(Y=110)22.2(Y=140)
Block Chains for DUB, DUB-S, LDUB, LDUB-S type dust conveyor
Attachment KL
Attachment KUL
Unit (mm)
Chain No.
DK 30B150
DK 40B200
Outer plate
T
Block
TB
Wing width
HB
X
180
45
25
45
230
50
32
50
50
32
50
290
380
13.5
13.5
14.5Y=6516.0Y=90
14.5Y=6516.0Y=90
14.5
14.5
16.5Y=6519.5Y=100
16.5Y=6519.5Y=100
20.0
20.0
22.3Y=6527.8Y=110
22.3Y=6527.8Y=110
19.6
22.0Y=6527.9Y=110
Driving Sprocket
Driven Sprocket
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
DK 40B150
Dimensions
Unit (mm)
Dimensions
Unit (mm)
Chain Pitch dia. Outer dia. Tooth width Range of axle dia.
Do
T
Dp
pitch
Over
398.2
430
152.4
22
50
145
493.2
525
398.2
435
152.4
28
50
145
493.2
530
522.4
560
200
28
50
145
647.2
684
Chain Pitch dia. Outer dia. Tooth width Range of axle dia.
Do
T
Dp
pitch
Over
398.2
420
152.4
22
50
110
493.2
515
398.2
422
152.4
28
50
110
493.2
517
522.4
547
200
28
50
110
647.2
671
Hub
dimensions
50
65
DK 30B150
65
85
DK 40B150
85
110
110
130
DK 40B200
130
145
No.d
Hub
dimensions
Hub dimensions
L2
D
L1
110
30
45
140
40
60
180
50
80
205
70
100
225
70
100
50
65
DK 30B150
65
85
DK 40B150
85
110
No.d
Hub dimensions
L2
D
L1
110
30
45
140
40
60
180
50
80
Note: 1. For the axle hole dimension, please refer to pages describing
axle diameters and hub dimensions.
2. Ask us for the delivery time.
Note: 1. For the axle hole dimension, please refer to pages describing
axle diameters and hub dimensions.
2. Ask us for the delivery time.
284
Easy maintenance
The apron can be replaced just by detaching the pins
of the side chain.
T W
DK Specialty
Conveyor Chains
150
Dimensions
Unit (mm)
Conveyor
Conveyor Apron Center Outer Wing Hinge plate Hinge Min. flexibility Avg. tensile Approx. Side
No.
width distance width height thickness
weight chain
Upper radius Lower radius strength
A
B
C
L
t
S
kN
kgf kg/m No.
Rc
r
DEC 3075-150
DEC 3075-300
DEC 3075-450
DEC 3100-150
DEC 3100-300
DEC 3100-450
DEC 7150-150
DEC 7150-300
DEC 7150-450
DEC 7150-600
DEC 7150-750
150
300
450
150
300
450
150
300
450
600
750
188.4
338.4
488.4
188.4
338.4
488.4
200.4
350.4
500.4
650.4
800.4
227.3
377.3
527.3
227.3
377.3
527.3
252.7
402.7
552.7
702.7
852.7
40
2.0
16.4
300
75
60
2.0
16.4
450
100
80
3.2
26.0
900
150
13.0
58.8 6,000 17.5
22.4
12.7
58.8 6,000 16.9
21.1
18.8
25.7
137.3 14,000 32.2
39.9
46.3
285
Side chain
Plate
Pitch Roller outer Roller link
Pin
dia.
width Height Thickness dia.
P
d
R
W
H
T
DK03075R
75
30
18
22
3.2
7.94
DK03100R
100
30
18
22
3.2
7.94
DK07150R
150
40
22.2
32
4.5
11.11
[Type indication]
Conveyor No.
Quantity of components
Unit
Pitch number
() 100WL indicates a composition of 100 links each for both sides of the side chain,
100 pins and 100 aprons.
Specialized
Application
Conveyor Chain
Rc
P
r
DK Specialty
Conveyor Chains
Dimensions
Avg. tensile strength
Pitch
P
L1
L2
30.6
50
65
20
3.5
6.5
14
32.6
38.0
38
36.5
65
85
24
15.9
40.4
47.1
45
51.8
80
105
35.5
12.5
19.1
51.7
59.8
50
Chain No.
kN
DK 11125UF
DK 11150UF
Specialized
Application
Conveyor Chain
Unit (mm)
Roller link
width
DK 19200UF
DK 19250UF
kgf
112 11,500
186 19,000
245 25,000
DK 32300UF
DK 50300UF
DK 50450UF
200
250
Approx. weight
Plate
250
313 32,000
490 50,000
250
300
300
450
kg/m
8.9
7.9
12.1
10.8
19.5
300
DK 25300UF
DK 32250UF
150
Pin
200
DK 25200UF
DK 25250UF
125
Roller
17.0
15.3
57.6
100
130
39
13.5
22.2
55.7
62.8
65
67.4
125
160
44
15
25.4
68.1
74.9
12
80
Note: 1. It is possible to manufacture chains with roller types other than UF and with specific attachments.
2. The dimension for the sprocket used for this chain is identical to that of the Roller F type. (Please see P.315)
3. Ask us for the delivery time.
286
26.2
23.4
40.4
31.9
90 (60 : 0=26)
DK
DK
DK
DK
DK
DK
DK
DK
DK
19200M
19250M
25200M
25250M
32200M
32250M
32300M
50250M
50300M
DK 65300M
Type
kNkgf
Standard Heavy-duty
186
279
19,00028,500
245
392
25,00040,000
Standard
Chain No.
DK 11152M
DK 19152M
DK 25152M
200
250
200
250
200
500
313
32,00051,000 250
300
250
686
490
50,00070,000 300
882
588
60,00090,000 300
171
112
11,50017,500 152.4
279
186
19,00028,500 152.4
392
245
25,00040,000 152.4
200
392
40,000 250
200
225
588
60,000 250
300
200
250
931
95,000 300
350
1,225 250
125,000 300
350
DK 35Z200M
DK 35Z250M
DK 50Z200M
DK 50Z225M
DK 50Z250M
DK 50Z300M
DK 75Z200M
DK 75Z250M
DK 75Z300M
DK 75Z350M
DK 100Z250M
DK 100Z300M
DK 100Z350M
DK 120Z250M
DK 120Z300M
1,470
DK 120Z350M
150,000
DK 120Z400M
DK 140Z300M
1,667
DK 140Z350M
170,000
DK 140Z400M
DK 160Z300M
1,863
DK 160Z350M
190,000
DK 160Z400M
DK 200Z350M
2,255
DK 200Z400M
230,000
DK 200Z450M
DK 250Z350M
2,843
DK 250Z400M
290,000
Note: Ask us for the delivery time.
Strong Z-type
Pin
D
L1
Plate
L2
Attachment
K
Flush
bolt
Unit (mm)
Approx. weight
kg/m
Without
attachment
With
Attachment G4
111.0
110.5
114.6
113.7
118.7
118.2
117.2
128.7
126.8
50 100
140 80 125 14 27.0 45.5 M12
100 80 125
65 140 100 150 18 33.0 48.5 M16
170
80 140
170 100 150 18 33.0 60.0 M16
108.6
108.1
111.9
111.0
116.4
115.2
114.2
125.2
123.3
130.1
134.8
38
75
105.8
107.4
45
75
109.4
111.4
50
75
112.6
115.2
57
80 125
100 150 14 27.0 45.5 M12
75
90
100
140
100
120
140
170
100
140
170
225
140
170
225
140
170
225
260
170
225
260
170
225
260
200
260
290
200
260
112.7
111.7
117.7
116.9
116.2
115.2
131.0
128.0
126.0
124.6
142.5
139.5
137.2
150.6
146.8
143.7
141.6
155.5
151.8
149.1
168.4
163.8
160.3
177.5
173.3
170.0
101.6
192.5
115.3
115.0
120.0
119.2
119.2
118.2
133.3
131.5
129.5
128.1
147.3
145.6
143.2
156.2
152.3
149.2
148.7
162.0
158.2
155.4
175.7
171.0
167.4
186.8
182.6
179.3
110.7
101.7
250
300 82.5
350
400
300
350 85.0
400
300
350 92.5
400
350
400 95.0
450
350 100.0
400
287
80 125
100 150
80 125
100 150 18 33.0 60.0 M16
M16
100 150 18 33.0
120 180 22 39.0 72.0 M20
120 180
140 210
M16
76.0
M20
22 39.0
18 33.0
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
G4-hole
DK Specialty
Conveyor Chains
90 (60 : 0=26)
G4-hole
DK 19076M
DK 28076M
DK 23100M
DK 32100M
DK 35Z100M
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
50Z100M
50Z125M
75Z125M
75Z150M
75Z175M
100Z125M
100Z150M
100Z175M
120Z125M
120Z150M
120Z175M
140Z150M
140Z175M
DK 160Z175M
DK 200Z175M
Type
kNkgf
Pin
Plate
W
R
D
L1
L2
Standard Heavy-duty P
186
0
19,000
76.2 36.5 38.1 15.9 40.4 47.1
274
28,000
0
225
51.8 44.5 19.1 51.7 59.8
23,000
100
0
313
57.6 50.8 22.2 55.7 62.8
32,000
0
392
51.8 44.5 22.2 53.8 60.2
40,000 100
588
0
57.6 50.8 25.4 57.3 64.2
60,000
125
931
190,000 175
2,225
.0
0
.0
95
Standard
Chain No.
Strong Z-type
Specialized
Application
Conveyor Chain
Note: 1. Pins for DK 23100M and DK 32100M are both-side notched pins.
Attachment
B
45
75
50
9
57
9
75
125 130 180
90 150
175
125
100 150
175
125
16
115 150
175
150
125
12
130
19
150
170
180
130
170
180
150
170
180
170
220
230
180
230
240
200
230
240
230
18 33
.0
7.5
17.5
20.4
48.5
24.7
27.3
45.5
19.0
21.7
26.2
23.0
41.9
37.6
34.5
63.3
56.7
52.0
74.6
68.3
62.5
81.3
74.0
28.6
26.1
46.1
42.7
39.7
68.1
63.9
59.3
79.8
75.1
69.4
87.8
81.1
91.6
99.9
119.3
134.2
M16
M16
M16
7.5
.0
72
.0 M20
22 39.0 8.5
18 33
22 39
.0
.0
8.5
250 26 42.2 14
195
M16
7.5
180
175
48.5
60
.0
18 33
With
Attachment G4
17.0
45.5
65
Without
attachment
13.1
288
Flush
bolt
Unit (mm)
Approx. weight
kg/m
76
.0
M20
77.0
87.0
88.5
M24
Unit (mm)
Chain No.
Roller link
Avg. tensile strength Pitch
width
kN
kgf
DK 60300
DK 60400
588 60,000
DK 60500
DK 90300
DK 90400
882 90,000
DK 90500
DK 90300W
DK 90400W
882 90,000
DK 90500W
DK 130300
DK 130400
1,274 130,000
DK 130500
DK 130600
DK 160400
DK 160500
1,569 160,000
DK 160600
P
300
400
500
300
400
500
300
400
500
300
400
500
600
400
500
600
H1
H2
Bearing rated
Top plate Approx.
load Dynamic
weight
C / Static C
T1
B kg/m kNkgf
64.5 72.5
12
154.5
45
92
12
180
30
74.5 81.5
16
177.5
56
110
16
190
30
82.5 89.5
16
177.5
56
110
16
210
70
19
188
63
113
16
210
80
19
221.5
75
134
19
220
Pin
Roller
60
125
55
28
62
135
55
78
135
71
76
150
85
175
L1
Plate
L2
289
63
58
55
90
83
79
98
89
84
119
109
102
97
139
130
122
158(16,200)
133(13,600)
204(20,900)
164(16,800)
243(24,800)
233(23,800)
278(28,400)
246(25,100)
304(31,000)
343(35,000)
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
DK Specialty
Conveyor Chains
Specialized
Application
Conveyor Chain
Feeding direction
Unit (mm)
Pitch
Roller dia.
Pin length
Plate
kN
kgf/strand
Approx. weight
kg8L2
323
490
735
980
1,176
33,000
50,000
75,000
100,000
120,000
160
160
160
160
160
36.0
46.0
51.4
55.0
65.0
44.5
50.8
63.5
70.0
75.0
141.7
154.1
187.8
209.5
221.5
9
9
12
16
16
50
65
80
90
100
47
63
106
155
185
Roller dia.
Pin length
kN
kgf/strand
Approx. weight
kg4L2
205
323
490
735
21,000
33,000
50,000
75,000
160
160
160
160
30.6
36.0
46.0
51.4
28.58
44.5
50.8
63.5
102.5
141.7
154.1
187.8
6
9
9
12
38
50
65
80
17
30
38
62
Unit (mm)
290
Plate
Block Chain
When a chain having a high tensile strength for the chain width (corresponding to the pin length) is required, a block chain is
an excellent choice. A Block Chain is simple and highly rigid since it does not have bushings or rollers. Although the
frictional force is large when the chain runs on the floor, the chain has an extended service life because it has no rotating
parts. Thus, large loads can be conveyed. Block Chains are suitable for conveyors loading heavy articles with strong impact
and conveyors used in severe environments to convey high temperature or abrasion-sensitive and corrosion-sensitive
objects.
We manufacture 26 kinds of standard Block Chains in tensile strength ranging from 308kN (=31.5 tons) to 2,721 kN
(=277.5 tons). For enhancing reliability of conveyance, block chains with various dogs are designed and manufactured
upon request.
DK 32B150
DK 32B200
DK 41B150
DK 41B200
DK 56B200
DK 56B250
DK 63B200
DK 63B250
DK 70B200
DK 70B250
DK 90B200
DK 90B250
DK 115B250
DK 115B300
DK 140B250
DK 140B300
DK 180B300
DK 180B350
DK 210B300
DK 210B350
DK 250B300
DK 250B350
DK 280B300
DK 280B350
291
Specialized
Application
Conveyor Chain
Chain No.
DK Specialty
Conveyor Chains
Unit (mm)
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
Type of dogs
1. Fixed dog
3. Duck dog
A protrusion is provided
on a block or outer plate
for conveyance.
2. Tilt dog
Unit (mm)
Chain No.
DK 100-152
Pitch
P
152.4
158
30
45
60
32
292
64
92
13
kN
kgf
kg/m
980
100,000
28.7
In-Water Usage
Conveyor Chain
DK Specialty
Conveyor Chains
Running direction
Unit (mm)
Chain No.
DK 4520S
Chain
Roller
Avg. tensile strength
Pitch Inner width Outer width dia.
kN
kgf
P
W
N
R
333 34,000 450 40.3
80.0
90
Dia.
D
20
Pin
Plate
Bolt
Length
Thickness Height Dia. Length
Position
R
L1
L2
T
H
d
K2
C
K1
43.0
55.0
9
65
20
116
130
190
13
DK 6030S
343
35,000
600
40.3
80.0
100
30
43.0
DK 6032S
470
48,000
600
55.2 108.0
100
32
DK 6034S
588
60,000
600
52.6 122.0
100
34
DK 6036S
706
72,000
600
64.6 134.0
115
DK 6040S
784
80,000
600
85.0 166.5
125
Weight
kg/
7.5
58.0
75
20
116
160
280
13
10.5
57.0
72.0
12
80
20
144
165
270
13
14.5
64.0
79.0
16
80
20
158
165
270
13
18.0
36
70.5
85.0
16
95
24
175
165
270
13
23.0
40
89.3 101.3
19
100
24
215
185
230
13
33.0
293
Rake Chain
Another machine used for the same purpose as the traveling water screen to remove sea water impurities is a bar
screen with rotary rakes. The screen is intended to remove impurities more coarse than those removed by the traveling
water screen. Impurities caught by a fixed bar screen are removed by rakes and discarded into buckets. A Rake Chain
moves the rakes and buckets along the bar screen. As the traveling water screen, resistance to corrosion and brittle
fracture are primary design considerations.
Rake
Bar screen
Bucket
In-Water Usage
Conveyor Chain
DK Specialty
Conveyor Chains
Unit (mm)
Chain No.
Plate
Avg. tensile strength Pitch Roller link Roller dia. Pin dia. Plate
width
width thickness
kN
kgf
P
W
R
D
H
T1
Pin length
L1
L2
Attachment
N3
T2
DK 20019
299
30,500
200
45
45
19
65
48.0
56.0
45.0 12
100
70 125
18
35
DK 20023
392
40,000
200
55
55
23
75
53.0
61.0
50.0 12
18
35
DK 25027
490
50,000
250
55
65
27
80
12
60.5
68.5
57.5 16
22
43
294
In-Water Usage
Conveyor Chain
DK Specialty
Conveyor Chains
F-roller type
S-roller type
Unit (mm)
Chain No.
DK WS 14152F
DK WS 21152F
DK WS 28152F
DK WS 38152F
DK WS 14152S
DK WS 21152S
DK WS 28152S
DK WS 38152S
DK WS 51152S
Note: Ask us for the delivery time.
Pitch
P
152.4
152.4
152.4
152.4
152.4
152.4
152.4
152.4
152.4
295
F-roller
R2
44.5
50.8
65.0
69.9
F
60
65
85
90
K
17
20
24
25
Pin
Z
5.5
6.5
8.0
8.5
D
11.3
14.5
15.9
19.1
11.3
14.5
15.9
19.1
22.5
L1
31.6
32.6
40.4
45.6
31.6
32.6
40.4
45.6
56.7
Plate
L2
35.0
38.0
47.1
52.9
35.0
38.0
47.1
52.9
62.8
T
6
6
8
9
6
6
8
9
9
H
28.6
38.0
45.0
50.0
28.6
38.0
45.0
50.0
65.0
Approx.
weight
kg/m
6.0
7.8
14.8
17.2
4.0
5.7
9.6
12.2
18.0
Unit (mm)
TL
60
60
60
100
100
100
32
38
45
55
65
70
15
19
19
70
85
90
8
9
12
R1
Additional
weight per unit
(kg)
d0
41.5 M10
51.0 M12
58.5 M16
0.5
0.6
1.0
Attachment A2 Type!
Attachment A2 Type@
Chain No.
DK WS 14152F
DK WS 21152F
DK WS 28152F
DK WS 38152F
Unit (mm)
Additional
weight per unit
(kg)
60
60
60
60
90
90
100
100
28
32
38
45
50
50
60
65
12
12
15
15
79
72
82
101
6
6
8
9
0.26
0.22
0.35
0.53
In-Water Usage
Conveyor Chain
DK Specialty
Conveyor Chains
Attachment A2 Type@
Attachment T
Chain No.
DK WS 14152S
DK WS 21152S
DK WS 28152S
DK WS 38152S
DK WS 51152S
Unit (mm)
R1
T0
R2
T1
d1
d0
Additional
weight per unit
(kg)
38.0
41.5
51.0
58.5
68.5
60
70
78
78
95
30
40
44
46
50
119.0
148.5
164.5
173.0
204.5
16
16
20
24
24
25
35
40
45
50
M20
M27
M30
M36
M45
M 8
M10
M12
M16
M16
1.1
1.9
2.8
3.3
5.3
Attachment T
296
Unit (mm)
Roller link
Pitch
width
Bush
P
W
B
78.11
26
23
103.2
26
23
152.4
26
24
152.4
30
26
152.4
30
29
152.4
38
35
WAS
WAS
WAS
WAS
WAS
WAS
13078B
13103B
15152B
19152B
25152B
35152B
kN
kgf
132
132
147
186
245
343
13,500
13,500
15,000
19,000
25,000
35,000
Dia.
D
12.7
12.7
13.5
14.5
15.9
19.1
Pin
Outer link
Inner link
Approx.
Length
Thickness Height Thickness Height weight
kg/m
L1
L2
TP
HP
TB
HB
27.9
33.3
5
33
5
36
5.2
27.9
33.3
5
33
5
36
4.6
29.4
34.3
5
36
6
38
4.8
32.6
37.5
6
38
6
44
5.9
34.1
40.9
6
44
7
54
7.9
40.6
49.0
7
54
7
60
10.9
Attachment SF4
Unit (mm)
Chain No.
2C
2X
S1
S2
S3
WAS
WAS
WAS
WAS
WAS
WAS
90
90
100
100
100
110
130
130
140
140
140
150
110
110
155
155
155
160
35
35
65
65
65
65
55
55
70
70
70
75
38
52
76
76
76
76
28
28
35
38
38
40
14
14
14
14
14
14
5
5
5
6
6
7
13078B
13103B
15152B
19152B
25152B
35152B
Additional
weight per unit
(kg)
0.6
0.7
1.2
1.4
1.4
1.6
In-Water Usage
Conveyor Chain
DK
DK
DK
DK
DK
DK
DK Specialty
Conveyor Chains
Attachment LA1
d0
L1
L2
TA
TL
M10
M10
M12
M12
M14
M16
55
55
55
65
65
75
77
77
77
90
90
102
28.9
28.9
30.4
33.6
35.1
42.6
42.9
42.9
44.0
51.4
53.9
62.5
40
56
68
80
80
80
19
19
19
24
24
26
16
16
16
20
20
24
12
12
12
16
16
19
Chain No.
DK
DK
DK
DK
DK
DK
WAS
WAS
WAS
WAS
WAS
WAS
13078B
13103B
15152B
19152B
25152B
35152B
Unit (mm)
Additional
weight per unit
(kg)
0.4
0.6
0.8
1.2
1.4
2.0
Attachment SA4
Attachment LA1
WAS
WAS
WAS
WAS
WAS
WAS
13078B
13103B
15152B
19152B
25152B
35152B
Unit (mm)
T0
L1
L2
d0
d1
12.0
12.0
13.0
14.0
15.5
18.5
12
12
12
16
16
19
24.4
24.4
25.4
28.6
29.6
34.6
27.9
27.9
29.4
32.6
34.1
40.6
49.4
49.4
51.4
59.4
62.4
72.0
M10
M10
M12
M12
M14
M16
22
22
26
26
30
32
1.5
1.5
2.0
2.0
2.5
2.5
297
Additional
weight per unit
(kg)
0.06
0.06
0.10
0.11
0.14
0.20
In-Water Usage
Conveyor Chain
DK Specialty
Conveyor Chains
Unit (mm)
120BF
140BF
160BF
160BFH
200BF
200BFH
240BF
kN
kgf
107
137
181
240
308
353
392
11,000
14,000
18,500
24,500
31,500
36,000
40,000
Pitch
P
38.10
44.45
50.80
50.80
63.50
63.50
76.20
Roller link
width
W
25.4
25.4
31.7
31.7
38.1
38.1
47.6
Bush
dia.
B
22.23
25.40
28.58
28.58
39.69
39.69
47.62
Pin
Dia.
D
12.7
14.5
15.9
15.9
22.2
22.2
25.4
Length
L1
L2
27.3
32.3
29.8
35.9
33.7
40.5
37.7
44.5
45.5
51.8
47.5
53.8
53.3
58.6
Plate
Thickness Height
T
H
5
33.0
6
38.0
6
44.0
8
45.0
9
54.0
10
57.0
10
63.5
Approx.
weight
kg/m
6.8
9.5
10.9
13.7
20.7
21.0
27.8
Drain
Gate
Sand basin
Pump chamber
Sub
aeration tank
Aeration tank
298
Disinfection
Unit (mm)
215
22,000 101.6
45
118
75
65.0
Dimension of dog
D
E
F
152.4
75
28.2
56
140
100
82.0
203.2
5.0
TL-44
299
71
31.8
Specialized
Application
Conveyor Chain
DK Specialty
Conveyor Chains
X-type Chains are used for trolleys, and power & free conveyors. They are drop-forged rivetless chains featuring high
strength, lightweight and easy removal of components. The bottom left photo shows an X-type Chain used as a trolley
conveyor with only one rail.
The bottom right photo shows an X-type Chain used for a power & free conveyor. An additional rail is installed to
receive the load for higher transfer capability.
A power & free conveyor generally has a so-called stop and
go function to connect and disconnect conveyed materials
with and from the chain, so that the conveyed materials can
be temporarily stopped, mixed and stored.
Three kinds of X-type Chains are available according to
required strength.
3D Bending
Conveyor Chain
DK Specialty
Conveyor Chains
A Z-type Chain for trolley conveyors is used for service similar to that of X-type Chains described on the previous page,
but is suitable for light loads. It is widely used in conveyors supplying parts, and devices for storing and unloading parts
on automobile assembling lines.
TYPE
Z-75
Avg. tensile strength Max. allowable load Max. 1 point suspending load Approx. weight Vertical radius of curvature Horizontal radius of curvature
kN
kgf
kgf
kgf
kgm
mm
mm
49.0
5,000
500
25
4.6
600
600
For example, the figure below shows that Z-type Chain running in C-section lightweight steel.
300
Chain No.
Pitch
P
mm
kgf
DK FH-100
100
6.86
700
DK FH-125
125
6.86
700
DK FH-150
150
6.86
700
3D Bending
Conveyor Chain
DK Specialty
Conveyor Chains
For instance, the figure below shows a condition that FH-type Chain travels in the rail made of two C-section
lightweight steel.
301
3D Bending
Conveyor Chain
DK Specialty
Conveyor Chains
Running direction
Unit (mm)
Chain No.
Pitch
P
H1
L.S.T 6"
152.4
40.9
21
48.4
302
21,600
7.5
58.0
25.0
Rivetless chain
3D Bending
Conveyor Chain
DK Specialty
Conveyor Chains
Booster chain
Unit (mm)
Chain No.
Pitch
P
DK X348
38.1
25.40
22.23
152.4
40.0
DK X458
50.8
31.75
28.58
203.2
46.0
303
Roller dia.
D
Dog pitch
PD
Chain height
H
Others
DK Specialty
Conveyor Chains
Since a chain for drawing a rod in a draw bench requires high strength even though the speed is low, the plates are robust.
For example, the following types are designed and supplied to suit for various draw benches.
Others
304
PAT.
Chain Bearing Roller is provided with a special built-in chain instead of a ball bearing or roller bearing. It is suitable for
low speed rotation, and is used as conveyor chain rollers which require high durability under severe conditions such as
high temperature, large load, dust, scale and corrosive (submerged) atmosphere in steelmaking and other applications
where general rolling bearings are not practical.
They are mainly assembled in chain plates, and are also used as rollers of large chains.
Outer ring
Chain
Cover
Unit (mm)
Dimensions
Model No.
kN
kgf
CBR 55
55
10
33
35.0
36.5
0.98
100
CBR 80
80
26
53
55.6
57.6
2.94
300
100
26
66
69.0
71.0
4.90
500
CBR 100
Note: 1. Please consult with us for sizes not specified in the above table.
2. Ask us for the delivery time.
305
Others
DK Specialty
Conveyor Chains
Pin
Notch dimensions
Deposit prevention type / IWD
Lever
Standard type / IW
DK Specialty
Conveyor Chains
Frame
The values for H are the sum of the lever dimensions and A.
The values for weight do not include the safety net weight.
Standard type / IW
Others
IW250
295
112
100
262
IW300
345
152
140
IW420
465
227
215
Number Weight
of lever
112
250
100
312
192
300
180
432
342
420
330
112
IW480
525
302
290
492
492
480
480
10
IW800
845
227
215
812
342
63
800
330
11
IW1000 1045
277
265
1012
442
1000
430
16
IW1200 1245
327
315
1212
542
1312
1200
530
21
The values for H are the sum of the lever dimensions and A.
The values for weight do not include the safety net weight.
IWH250
295
112
100
262
112
250
100
IWH300
345
152
140
312
192
300
180
IWH420
465
227
215
432
342
420
330
IWH480
525
302
290
492
492
480
480
12
IWH800
845
227
215
812
342
800
330
14
IWH1000 1045
277
265
1012
442
1000
430
19
IWH1200 1245
327
315
1212
542
1312 1200
530
25
162
Number Weight
of lever
113
306
No.
IWD300
345
152
140
312
192
IWD420
465
227
215
432
342
IWD480
525
302
290
492
492
112
63
Number Weight
of lever
300
180
420
330
480
480
10
Retainer plate
Hexagon
head bolt
U-nut
Bracketq
High-neck (IWH)
Standard (IWH)
Type
Deposit prevention (IWD)
Environment Ambient temperature (V) Heat resistant (T) Corrosion resistant (SS) Ambient temperature (V) Heat resistant (T) Ambient temperature (V) Heat resistant (T)
Metal safety net Not attached Attached (-N) Not attached Attached (-N) Not attached Attached (-N) Not attached Attached (-N) Not attached Attached (-N) Not attached Not attached
250
300
420
480
800
1000
1200
Indication
Overview
Example
High-neck type + notch dimension: 300 mm
+ ambient temperature + safety net
IWH300V-N (Nominal indication)
Standard type
307
High-neck type
Others
DK Specialty
Conveyor Chains
Photo / Sprocket
Application Photo
Photo/ Sprocket
Slab conveyor
Slat conveyor
Apron conveyor
Pan conveyor
Hook-on conveyor
Application Photo
Photo/ Sprocket
309
Photo / Sprocket
Dust conveyor
Scraper conveyor
Application Photo
Photo/ Sprocket
310
Application Photo
Photo/ Sprocket
311
Photo / Sprocket
Application Photo
Photo/ Sprocket
312
Photo / Sprocket
Photo of
Specialty Chain
Photo/ Sprocket
313
Photo / Sprocket
Number of teeth
Generally, smoother and more durable operation is ensured
with larger number of teeth and sprockets, so ten or more
teeth are recommended.
If the conveyance speed is extremely low (10 m/min or less)
under a uniform load, the number of teeth can be decreased
down to six.
Tooth form
For accurate and smooth operation of chain conveyors, two
types of tooth forms are used depending on the sprocket
size: for small sprockets (11 or less teeth) and large sprockets
(12 or more teeth).
Material
Description
(Hub) Rolled steel for general
Welded
structural purposes
(SS400)
sheet steel (Teeth) Carbon steel for machine structural
purposes
(S43C or S45C)
Cast high tensile carbon steel
SCC3
Cast steel
Cast low manganese steel
SCMn3
Sprocket
Photo/ Sprocket
Name
Applicable conveyor
Continuous flow conveyor, bucket
elevator, coil conveyor, pan conveyor,
apron conveyor, dust conveyor (roller
chain type) etc.
Large bucket elevator, coil conveyor,
dust conveyor (block chain type) etc.
Dust conveyor (block chain type),
drag chain conveyor etc.
1.
Welded sheet
steel sprocket
Welded sheet steel
Number of teeth
Roller type
Brand name
2.
Cast steel
sprocket
Chain size
Number of teeth
Roller type
Brand name
Chain size
Chain size
Si
Mn
0.400.46
0.420.48
0.300.40
0.300.40
0.150.35
0.150.35
0.300.60
0.300.60
0.600.90
0.600.90
0.500.80
1.001.60
0.050 or less
0.030 or less
0.030 or less
0.04 or less
0.04 or less
0.050 or less
0.035 or less
0.035 or less
0.04 or less
0.04 or less
3.
Welded sheet
steel sprocket
Welded
sheet steel
Number of teeth
Roller type
Chain pitch
Chain type
Brand name
Size
Chain size
4.
Cast steel
sprocket
Number
of teeth
Roller type
Brand name
Chain pitch
Chain type
Size
Chain No.
Pitch
DK03075
DK03100
DK03125
DK03150
DK07075
DK07100
DK07125
DK07150
DK09100
DK09125
DK09150
DK11100
DK11125
DK11150
DK11200
DK13150
DK13200
DK19200
DK19250
DK19300
DK25200
DK25250
DK25300
DK32200
DK32250
DK32300
DK32450
DK50250
DK50300
DK50450
DK50600
DK65300
DK65450
DK05101
75
100
125
150
75
100
125
150
100
125
150
100
125
150
200
150
200
200
250
300
200
250
300
200
250
300
450
250
300
450
600
300
450
101.6
DK08066
66.27
22
R-roller
15.9
S-roller
M-roller
F-roller
3.3
12
1.95
12
1.95
12 1.95 12 1.95
16
3
16
17 2.5 16
2.5
4.5
12
2.5
1
11 3 1.5
3
3
9
9
1.45
0.8
1.45 0.8
25.6
19
3.3
19
3.3
19
3.3
20 2.8 20 2.8 20 2.8
12
3.8
2
13 3.3 1.5
30.6
22
4.3
22
4.3
22
4.3
24 3.3 23 3.8 23 3.8
3.5
6.5
16
3.8
2
17 3.3 1.5
36.5
28
4.25
28
4.25
28
4.25
29 3.75 28 4.25 28 4.25
19
4.75
2.5
19 4.75 2.5
36.5
28
4.25
28
4.25
28
4.25
30 3.25 29 3.75 29 3.75
19
4.75
2.5
20 4.25 2
12.5
51.8
40
5.9
40
5.9
40
5.9
43 4.4 42 4.9 42 4.9
57.6
28
6.9
3.5
30 5.9 2.5
6
13.5
45
6.3
45
6.3
45
6.3
48 4.8 47 5.3 47 5.3
67.4
75
22.2
27.6
DK08101
101.6
27.6
DK09101
101.6
27.6
DK11152
152.4
30.8
DK13101
101.6
31
DK19152
152.4
36.5
DK25152
152.4
37.5
32
6.8
3.5
34 5.8 2.5
55
6.2
55
6.2
55
6.2
56 5.7 56 5.7 56 5.7
65
65
16
17
22
21
22
21
22
24
25
25
28
30
28
30
5
5
3.1
2.6
2.8
3.3
2.8
3.3
4.4
3.4
3
3
4.25
3.25
4.75
3.75
65
65
16
17
22
21
22
21
22
21
22
24
25
25
28
29
28
30
5
5
3.1
2.6
2.8
3.3
2.8
3.3
2.8
3.3
4.4
3.4
3
3
4.25
3.75
4.75
3.75
65
65
22
21
22
21
22
21
22
24
25
25
28
29
28
30
315
5
5
2.8
3.3
2.8
3.3
2.8
3.3
4.4
3.4
3
3
4.25
3.75
4.75
3.75
15
16.5
6.5
7.5
8.5
36
8.7
36 8.7
43
43
16
17
19
21
19
20
8
8
4.4
3.9
4.75
3.75
5.25
4.75
4
4
3
3
2.5
2
2.5
1.5
3
2.5
Photo/ Sprocket
Sprocket
W
A
Photo / Sprocket
Sprocket
Photo/ Sprocket
Chain No.
Pitch
51.8
DK 35H200M
DK 35Z200M
200
DK 35H250M
DK 35Z250M
250
DK 50H200M
DK 50Z200M
200
DK 50H225M
DK 50Z225M
225
DK 50H250M
DK 50Z250M
250
DK 50H300M
DK 50Z300M
300
DK 75H200M
DK 75Z200M
200
DK 75H250M
DK 75Z250M
250
DK 75H300M
DK 75Z300M
300
DK 75H350M
DK 75Z350M
350
DK100H250M
DK100Z250M
250
DK100H300M
DK100Z300M
300
DK100H350M
DK100Z350M
350
DK120H250M
DK120Z250M
250
DK120H300M
DK120Z300M
300
DK120H350M
DK120Z350M
350
DK120H400M
DK120Z400M
400
DK140H300M
DK140Z300M
300
DK140H350M
DK140Z350M
350
DK140H400M
DK140Z400M
400
DK160H300M
DK160Z300M
300
DK160H350M
DK160Z350M
350
DK160H400M
DK160Z400M
400
DK200H350M
DK200Z350M
350
DK200H400M
DK200Z400M
400
DK200H450M
DK200Z450M
450
DK250H350M
DK250Z350M
350
DK250H400M
DK250Z400M
400
DK250H500M
DK250Z500M
500
Driving
45
Driven
3.4
40
5.9
42 4.9 39 6.4
57.6
50
3.8
45
6.3
47 5.3 43 7.3
67.4
55
6.2
50
8.7
56 5.7 50 8.7
75
65
82.5
55
10
57
72 5.25 63 9.75
85
74 5.5 64 10.5
92.5
82 5.25 70 11.25
95
84 5.5 72 11.5
100
90
316
76 12
Chain No.
DK19076M
DK28076M
DK23100M
DK32100M
DK35Z100M
Pitch
76.2
36.5
76.2
36.5
100
51.8
100
57.6
100
51.8
DK50Z100M
100
DK50Z125M
125
DK50Z150M
150
DK75Z100M
100
DK75Z125M
125
DK75Z150M
150
DK75Z175M
175
DK100Z125M
125
DK100Z150M
150
DK100Z175M
175
DK120Z125M
125
DK120Z150M
150
DK120Z175M
175
DK140Z150M
150
DK140Z175M
175
DK160Z175M
DK200Z175M
Driving
28
Driven
4.25
28
4.25
29 3.75 29 3.75
28
4.25
28
4.25
29 3.75 29 3.75
40
5.9
40
5.9
42 4.9 39 6.4
40
8.8
40
8.8
42 7.8 39 9.3
40
5.9
40
5.9
42 4.9 39 6.4
45
6.3
45
6.3
67.4
55
75
6.2
50
8.7
56 5.7 50 8.7
65
55
10
57
63
9.75
85
175
92.5
175
95
64
Photo/ Sprocket
10.5
74 5.5 64 10.5
70
11.25
82 5.25 70 11.25
84 5.5 72 11.5
317
Sprocket
Photo / Sprocket
Outer Diameter of DK Conveyor Chain Sprockets: Do (Welded sheet steel type) [1]
Pitch
P
66.27
75
226
249
273
296
320
343
367
391
212
235
259
282
306
329
353
377
228
251
275
298
322
345
369
393
22.2
155
175
195
DK03075 R.F
30.0
180
203
15.9
166
189
40.0
182
205
S
DK07075 R.F
S
DK09100 R.F
22.2
172
195
218
241
265
288
312
335
359
383
30.0
230
260
291
322
354
385
416
448
479
511
15.9
216
246
277
308
340
371
402
434
465
497
40.0
232
262
293
324
356
387
418
450
481
513
22.2
222
253
284
315
346
377
401
440
472
503
45.0
236
266
297
328
360
391
422
454
485
517
26.5
227
257
288
319
350
382
413
444
476
507
50.0
240
270
301
332
364
395
426
458
489
521
28.8
229
259
290
321
352
384
415
446
478
510
DK05101 R
38.1
233
264
296
327
359
391
423
455
487
519
20.1
223
254
286
317
349
381
413
445
477
509
44.5
239
270
301
333
364
396
428
460
492
524
22.2
225
256
288
319
351
383
415
447
479
511
38.1
233
264
296
327
359
391
423
455
487
519
26.5
230
261
292
324
355
387
419
451
483
515
44.5
239
270
301
333
364
396
428
460
492
524
31.8
235
266
297
329
361
392
424
456
488
521
30.0
280
318
357
395
435
474
513
552
592
631
DK08101 R.F
S.M
DK09101 R
S.M
DK13101 R
S.M
DK03125 R.F
S
DK07125 R.F
S
DK09125 R.F
S.M
DK11125 R.F
S.M
Photo/ Sprocket
341
DK08066 S.M
S.M
DK03150R.F
S
DK07150R.F
S
DK09150 R.F
S.M
DK11150 R.F
S.M
DK13150 R.F
Sprocket
320
S.M
S.M
DK11152 R.F
S.M
DK19152 R.F
S.M
DK25152 R.F
S.M
DK11200 R.F
S.M
200
299
DK11100 R.F
152.4
15
278
150
14
257
DK07100 R.F
125
13
237
101.6
12
216
Roller dia.
DK03100 R.F
100
Chain No.
DK13200 R.F
S.M
DK19200 R.F
S.M
15.9
266
304
343
381
420
460
499
538
578
617
40.0
282
320
359
397
437
476
515
554
594
633
22.2
272
310
349
388
427
466
505
545
584
623
45.0
286
324
363
401
441
480
519
558
598
637
26.5
276
315
353
392
431
470
510
549
588
628
50.0
290
328
367
405
445
484
523
562
602
641
28.8
279
317
355
394
433
473
512
551
591
630
30.0
330
376
422
469
515
562
610
657
704
751
15.9
316
362
408
454
501
548
595
643
690
737
40.0
332
378
424
471
517
564
612
659
706
753
22.2
322
368
414
461
508
555
602
649
696
744
45.0
336
382
428
475
521
568
616
663
710
757
26.5
327
372
418
465
512
559
606
653
701
748
50.0
340
386
432
479
525
572
620
667
714
761
28.8
329
375
421
467
514
561
608
656
703
750
60.0
348
394
440
487
533
580
628
675
722
769
31.8
332
378
424
470
517
564
612
659
706
753
50.8
345
392
439
486
534
582
630
677
726
774
25.8
331
377
424
471
519
567
615
663
711
759
57.2
351
397
444
491
539
587
635
683
731
779
34.9
340
386
433
480
528
576
624
672
720
768
69.9
361
407
454
502
549
597
645
693
741
789
40.1
345
391
438
486
533
581
629
677
725
773
50.0
440
501
562
625
687
750
813
876
939
1,002 0
28.8
429
490
551
614
676
739
802
865
928
991
60.0
448
509
571
633
695
758
821
884
947
1,010 0
31.8
432
493
555
617
679
742
805
868
931
994
65.0
452
513
575
637
699
762
825
888
951
1,014 0
34.9
435
496
558
620
682
745
808
871
934
997
318
Roller dia.
12
13
14
15
DK25200 R.F
180.1
464
525
587
649
1,711
1,774
1,837
1,900
1,963
1,026
S.M
DK32200 R.F
S.M
200
DK35Z200M
140.1
440
501
563
625
1,687
1,750
1,813
1,876
1,939
1,002
100.1
480
541
603
665
1,727
1,790
1,853
1,916
1,979
1,042
144.5
445
505
567
629
1,692
1,754
1,817
1,880
1,943
1,006
1,
747
44.5
1,
686
50.8
1,
690
1,
754
63.5
1,
701
1,
764
50.8
1,
771
1,
841
165.1
552
628
705
783
1,861
1,939
1,018
1,097
1,175
1,254
134.9
535
611
688
766
1,844
1,922
1,001
1,080
1,158
1,237
180.1
564
640
717
795
1,873
1,951
1,030
1,109
1,187
1,266
DK35H200M
DK50Z200M
DK50H200M
DK75Z200M
DK75H200M
225
DK50Z225M
DK50H225M
DK19250 R.F
S.M
DK25250 R.F
S.M
DK32250 R.F
S.M
DK50250 R.F
S.M
250
DK35Z250M
140.1
540
616
693
771
1,849
1,928
1,006
1,085
1,164
1,243
100.1
580
656
733
811
1,889
1,967
1,046
1,125
1,203
1,282
144.5
545
621
698
775
1,854
1,932
1,010
1,089
1,168
1,247
125.1
600
676
753
831
1,909
1,987
1,066
1,145
1,223
1,302
150.8
551
627
704
782
1,860
1,938
1,017
1,095
1,174
1,253
1,
925
44.5
1,
847
50.8
1,
852
1,
930
63.5
1,
863
1,
941
.1
70
1,
1,
.1
75
1,
1,
165.1
652
743
836
929
1,023
1,117
1,211
1,306
1,400
1,495
134.9
635
726
819
912
1,006
1,100
1,194
1,288
1,383
1,478
180.1
664
755
848
941
1,035
1,129
1,223
1,318
1,412
1,507
DK35H250M
DK50Z250M
DK50H250M
DK75Z250M
DK75H250M
DK100Z250M
DK100H250M
DK120Z250M
DK120H250M
DK19300 R.F
S.M
DK25300 R.F
S.M
DK32300 R.F
S.M
DK50300 R.F
S.M
DK65300 R.F
S.M
300
Chain No.
DK50Z300M
640
732
824
917
1,011
1,105
1,199
1,294
1,388
1,483
680
771
864
957
1,051
1,145
1,239
1,334
1,428
1,523
144.5
645
736
828
922
1,015
1,109
1,204
1,298
1,393
1,487
125.1
700
791
884
977
1,071
1,165
1,259
1,354
1,448
1,543
150.8
651
742
835
928
1,022
1,116
1,210
1,304
1,399
1,494
140.1
712
803
896
989
1,083
1,177
1,271
1,366
1,460
1,555
157.1
657
749
841
934
1,028
1,122
1,216
1,311
1,405
1,500
50.8
1,013
1,108
1,202
63.5
1,024
1,119
1,213
.1
70
1,030
1,124
1,219
.1
75
1,034
1,128
1,222
.1
82
1,041
1,135
1,229
.1
86
1,044
1,138
1,232
1
1
DK100H300M
DK120Z300M
DK120H300M
DK140Z300M
DK140H300M
DK160Z300M
DK160H300M
950
100.1
DK75H300M
DK100Z300M
872
947
140.1
DK50H300M
DK75Z300M
868
319
Sprocket
Pitch
Photo/ Sprocket
Outer Diameter of DK Conveyor Chain Sprockets: Do (Welded sheet steel type) [2]
Photo / Sprocket
Outer Diameter of DK Conveyor Chain Sprockets: Do (Welded sheet steel type) [3]
Pitch
P
Chain No.
DK75Z350M
Roller dia.
6
63.5
1,186
.1
70
.1
75
.1
82
.1
86
.1
97
DK75H350M
DK100Z350M
DK100H350M
DK120Z350M
DK120H350M
350
DK140Z350M
DK140H350M
DK160Z350M
DK160H350M
DK200Z350M
DK200H350M
DK250Z350M
DK250H350M
DK120Z400M
107
DK160Z400M
DK250H400M
DK32450 R.F
S.M
DK50450 R.F
Photo/ Sprocket
450
S.M
DK65450 R.F
S.M
DK200Z450M
DK200H450M
500
DK250H500M
DK50600 R.F
S.M
1,296
1,406
1,192
1,301
1,411
1,196
1,306
1,416
1,202
1,312
1,422
1,205
1,315
1,425
1,215
1,324
1,434
1,224
1,333
1,443
1,358
1,484
1,609
.1
82
1,364
1,490
1,615
.1
86
1,367
1,493
1,618
.1
97
1,376
1,502
1,628
1,385
1,510
1,636
100.1
1,980
1,117
1,256
1,396
1,536
1,677
1,819
1,960
2,102
2,244
144.5
1,945
1,082
1,220
1,360
1,501
1,642
1,783
1,925
2,067
2,209
125.1
1,000
1,137
1,276
1,416
1,556
1,697
1,839
1,980
2,122
2,264
150.8
1,951
1,088
1,227
1,367
1,507
1,648
1,789
1,931
2,073
2,215
140.1
1,012
1,149
1,288
1,428
1,568
1,709
1,851
1,992
2,134
2,276
157.1
1,957
1,094
1,233
1,373
1,513
1,654
1,796
1,937
2,079
2,221
1,539
1,680
1,821
1,709
1,865
2,023
125.1
1,300
1,483
1,668
1,854
2,042
2,230
2,418
2,607
2,796
2,986
150.8
1,251
1,434
1,619
1,805
1,992
2,180
2,369
2,558
2,747
2,937
107
.1
.1
97
107
.1
Sprocket
600
DK250Z500M
15
DK200H400M
DK250Z400M
14
DK160H400M
DK200Z400M
13
.1
75
DK140H400M
400
.1
12
DK120H400M
DK140Z400M
320
P
66.27
75
12
13
14
15
216
237
257
278
299
320
1,341
226
249
273
296
320
343
367
1,391
212
235
259
282
306
329
353
1,377
205
228
251
275
298
322
345
369
1,393
172
195
218
241
265
288
312
335
359
1,383
30.9
230
260
291
322
354
385
416
448
479
1,511
15.9
216
246
277
308
340
371
402
434
465
1,497
40.9
232
262
293
324
356
387
418
450
481
1,513
22.2
222
253
284
315
346
377
401
440
472
1,503
45.9
236
266
297
328
360
391
422
454
485
1,517
26.5
227
257
288
319
350
382
413
444
476
1,507
50.9
240
270
301
332
364
395
426
458
489
1,521
28.8
229
259
290
321
352
384
415
446
478
1,510
DK05101 R
38.1
233
264
296
327
359
391
423
455
487
1,519
20.1
223
254
286
317
349
381
413
445
477
1,509
44.5
239
270
301
333
364
396
428
460
492
1,524
22.2
225
256
288
319
351
383
415
447
479
1,511
38.1
233
264
296
327
359
391
423
455
487
1,519
26.5
230
261
292
324
355
387
419
451
483
1,515
44.5
239
270
301
333
364
396
428
460
492
1,524
31.8
235
266
297
329
361
392
424
456
488
1,521
30.9
280
318
357
395
435
474
513
552
592
1,631
15.9
266
304
343
381
420
460
499
538
578
1,617
40.9
282
320
359
397
437
476
515
554
594
1,633
22.2
272
310
349
388
427
466
505
545
584
1,623
45.9
286
324
363
401
441
480
519
558
598
1,637
26.5
276
315
353
392
431
470
510
549
588
1,628
50.9
290
328
367
405
445
484
523
562
602
1,641
28.8
279
317
355
394
433
472
512
551
591
1,630
30.9
330
376
422
469
515
562
610
657
704
1,751
15.9
316
362
408
454
501
548
595
643
690
1,737
40.9
332
378
424
471
517
564
612
659
706
1,753
22.2
322
368
414
461
508
555
602
649
696
1,744
45.9
336
382
428
475
521
568
616
663
710
1,757
26.5
327
372
418
465
512
559
606
653
701
1,748
50.9
340
386
432
479
525
572
620
667
714
1,761
28.8
329
375
421
467
514
561
608
656
703
1,750
60.9
348
394
440
487
533
580
628
675
722
1,769
31.8
332
378
424
470
517
564
612
659
706
1,753
50.8
345
392
439
486
534
582
630
677
726
1,774
25.8
331
377
424
471
519
567
615
663
711
1,759
57.2
351
397
444
491
539
587
635
683
731
1,779
34.9
340
386
433
480
528
576
624
672
720
1,768
69.9
361
407
454
502
549
597
645
693
741
1,789
40.1
345
391
438
486
533
581
629
677
725
1,773
50.9
440
501
562
625
687
750
813
876
939
1,002
Chain No.
Roller dia.
DK08066 S.M
22.2
155
175
195
DK03075 R.F
30.9
180
203
15.9
166
189
40.9
182
22.2
S
DK07075 R.F
S
DK03100 R.F
S
DK07100 R.F
100
S
DK09100 R.F
S.M
DK11100 R.F
S.M
DK08101 R.F
101.6
S.M
DK09101 R
S.M
DK13101 R
S.M
DK03125 R.F
S
DK07125 R.F
125
S
DK09125 R.F
S.M
DK11125 R.F
S.M
DK03150 R.F
S
DK07150 R.F
S
150
DK09150 R.F
S.M
DK11150 R.F
S.M
DK13150 R.F
S.M
DK11152 R.F
S.M
152.4
DK19152 R.F
S.M
DK25152 R.F
S.M
DK11200 R.F
S.M
200
DK13200 R.F
S.M
DK19200 R.F
S.M
28.8
429
490
551
614
676
739
802
865
928
1,991
60.9
448
509
571
633
695
758
821
884
947
1,010
31.8
432
493
555
617
679
742
805
868
931
1,994
65.9
452
513
575
637
699
762
825
888
951
1,014
34.9
435
496
558
620
682
745
808
871
934
1,997
321
Sprocket
Pitch
Photo/ Sprocket
Photo / Sprocket
Chain No.
Roller dia.
DK25200 R.F
180.5
464
525
587
649
S.M
DK32200 R.F
S.M
200
DK35Z200M
DK50Z225M
S.M
DK25250 R.F
S.M
DK32250 R.F
S.M
DK50250 R.F
S.M
250
DK35Z250M
563
625
1,687
1,750
1,813
1,876
1,939
1,002
603
665
1,727
1,790
1,853
1,916
1,979
1,042
144.5
445
505
567
629
1,692
1,754
1,817
1,880
1,943
1,006
1,
1,
1,254
44.5
50.8
63.5
50.8
165.5
552
628
705
134.9
535
611
688
180.5
564
640
717
1
1
1
Photo/ Sprocket
S.M
DK25300 R.F
S.M
DK32300 R.F
S.M
DK50300 R.F
Sprocket
S.M
DK65300 R.F
S.M
300
DK50Z300M
DK160H300M
1,
783
1,861
1,939
1,018
1,097
1,175
766
1,844
1,922
1,001
1,080
1,158
1,237
795
1,873
1,951
1,030
1,109
1,187
1,266
771
841
693
771
1,849
1,927
1,006
1,085
1,164
1,243
811
1,889
1,967
1,046
1,125
1,203
1,282
144.5
545
621
698
775
1,854
1,932
1,010
1,089
1,168
1,247
125.5
600
676
753
831
1,909
1,987
1,066
1,145
1,223
1,302
150.8
551
627
704
782
1,017
1,095
1,174
1,253
1,860
1,938
1,
1,
1,
1,
1,
1,
941
44.5
50.8
63.5
70.5
1,
868
1,
947
75.5
1,
872
1,
950
165.5
652
743
836
929
1,023
1,117
1,211
1,306
1,400
1,495
134.9
635
726
819
912
1,006
1,100
1,194
1,288
1,383
1,478
180.5
664
755
848
941
1,035
1,129
1,223
1,318
1,412
1,507
1
1
1
1
847
852
863
925
930
140.1
640
732
824
917
1,011
1,105
1,199
1,294
1,388
1,483
100.5
680
771
864
957
1,051
1,145
1,239
1,334
1,428
1,523
144.5
645
736
828
922
1,015
1,109
1,204
1,298
1,393
1,487
125.5
700
791
884
977
1,071
1,165
1,259
1,354
1,448
1,543
150.8
651
742
835
928
1,022
1,116
1,210
1,304
1,399
1,494
140.5
712
803
896
989
1,083
1,177
1,271
1,366
1,460
1,555
157.1
657
749
841
934
1,028
1,122
1,216
1,311
1,405
1,500
50.8
1,013
1,108
1,202
63.5
1,024
1,118
1,213
70.5
1,030
1,124
1,219
75.5
1,034
1,128
1,222
82.5
1,041
1,135
1,229
86.5
1,044
1,138
1,232
1
1
1
1
1
DK140H300M
DK160Z300M
1,
764
733
DK120H300M
DK140Z300M
1,
701
616
DK100H300M
DK120Z300M
1,
753
656
DK75H300M
DK100Z300M
1,
691
540
DK50H300M
DK75Z300M
1,
580
DK120H250M
DK19300 R.F
748
100.5
DK100H250M
DK120Z250M
685
140.1
DK75H250M
DK100Z250M
15
1,026
501
DK50H250M
DK75Z250M
14
1,963
541
DK35H250M
DK50Z250M
13
1,900
440
DK50H225M
DK19250 R.F
12
1,837
480
DK75H200M
225
1,774
140.1
DK50H200M
DK75Z200M
1,711
100.5
DK35H200M
DK50Z200M
322
Chain No.
DK75Z350M
DK75H350M
DK100Z350M
DK100H350M
DK120Z350M
DK120H350M
350
DK140Z350M
DK140H350M
DK160Z350M
DK160H350M
DK200Z350M
DK200H350M
DK250Z350M
DK250H350M
DK120Z400M
DK120H400M
DK140Z400M
DK140H400M
400
DK160Z400M
DK160H400M
DK200Z400M
DK200H400M
DK250Z400M
DK250H400M
DK32450 R.F
S.M
DK50450R.F
450
S.M
DK65450R.F
S.M
DK200Z450M
DK200H450M
500
600
DK250Z500M
DK250H500M
DK50600 R.F
S.M
Roller dia.
163.5
1,186
170.8
175.8
182.8
186.8
197.8
12
13
14
15
1,296
1,406
1,192
1,301
1,411
1,196
1,306
1,416
1,202
1,312
1,422
1,205
1,315
1,425
1,215
1,324
1,434
107.8
1,224
1,333
1,443
175.8
1,358
1,484
1,609
182.8
1,364
1,490
1,615
186.8
1,367
1,493
1,618
197.8
1,376
1,502
1,628
107.8
1,385
1,510
1,636
100.8
1,980
1,117
1,256
1,396
1,536
1,677
1,819
1,960
2,102
2,244
144.5
1,945
1,082
1,220
1,360
1,501
1,642
1,783
1,925
2,067
2,209
125.8
1,000
1,137
1,276
1,416
1,556
1,697
1,839
1,980
2,122
2,264
150.8
1,951
1,088
1,227
1,367
1,507
1,648
1,789
1,931
2,073
2,215
140.8
1,012
1,149
1,288
1,428
1,568
1,709
1,851
1,992
2,134
2,276
157.1
1,957
1,094
1,233
1,373
1,513
1,654
1,796
1,937
2,079
2,221
197.8
1,539
1,680
1,821
107.8
1,709
1,865
2,023
125.8
1,300
1,483
1,668
1,854
2,042
2,230
2,418
2,607
2,796
2,986
150.8
1,251
1,434
1,619
1,805
1,992
2,180
2,369
2,558
2,747
2,937
Sprocket
Pitch
Photo/ Sprocket
323
Photo / Sprocket
Pit
ch
dia
. (D
p)
er
Out
dia.
(Do
12
13
14
15
166.27
1,132.5
1,152.7
1,173.2
1,193.8
1,214.5
1,235.2
1,256.0
1,276.9
1,297.8
1,318.7
175.00
1,150.0
1,172.9
1,196.0
1,219.3
1,242.7
1,266.2
1,289.8
1,313.4
1,337.0
1,360.7
100.00
1,200.0
1,230.5
1,261.3
1,292.4
1,323.6
1,354.9
1,386.4
1,417.9
1,449.4
1,481.0
101.60
1,203.2
1,234.2
1,265.5
1,297.1
1,328.8
1,360.6
1,392.6
1,424.5
1,456.6
1,488.7
125.00
1,250.0
1,288.1
1,326.6
1,365.5
1,404.5
1,443.7
1,483.0
1,522.3
1,561.7
1,601.2
150.00
1,300.0
1,345.7
1,392.0
1,438.6
1,485.4
1,532.4
1,579.6
1,626.8
1,674.1
1,721.5
152.40
1,304.8
1,351.2
1,398.2
1,445.6
1,493.2
1,540.9
1,588.8
1,636.8
1,684.9
1,733.0
200.00
1,400.0
1,461.0
1,522.6
1,584.8
1,647.2
1,709.9
1,772.7
1,835.7
1,898.8
1,961.9
225.00
1,450.0
1,518.6
1,588.0
1,657.9
1,728.1
1,798.6
1,869.3
1,940.2
1,011.1
1,082.2
250.00
1,500.0
1,576.2
1,653.3
1,731.0
1,809.0
1,887.4
1,965.9
1,044.6
1,123.5
1,202.4
300.00
1,600.0
1,691.4
1,783.9
1,877.1
1,970.8
1,064.8
1,159.1
1,253.6
1,348.2
1,442.9
350.00
1,700.0
1,806.7
1,914.6
1,023.3
1,132.6
1,242.3
1,352.3
1,462.5
1,572.9
1,683.4
400.00
1,800.0
1,921.9
1,045.3
1,169.5
1,294.4
1,419.8
1,545.5
1,671.4
1,797.6
1,923.9
450.00
1,900.0
1,037.1
1,175.9
1,315.7
1,456.2
1,597.3
1,738.7
1,880.4
2,022.3
2,164.4
500.00
1,000.0
1,152.4
1,306.6
1,461.9
1,618.0
1,774.7
1,931.9
2,089.3
2,247.0
2,404.9
600.00
1,200.0
1,382.9
1,567.9
1,754.3
1,941.6
2,129.7
2,318.2
2,507.1
2,696.4
2,885.8
Sprocket
Photo/ Sprocket
Pitch
324
Pit
ch
dia
. (D
p)
o)
. (D
ia
rd
Sprocket
Photo/ Sprocket
te
Ou
325
Photo / Sprocket
Chain No.
DK1319076M
DK1328076M
DK1323100M
100
DK135Z100M
DK1332100M
DK150Z100M
125
150
175
150
175
Photo/ Sprocket
Sprocket
Dp
38.1
1,583.8
50.8
70
DK120Z125M
75
1,957.7
.1
DK175Z150M
.1
63.5
DK100Z150M
70
DK120Z150M
75
DK140Z150M
82
.1
Do
Driving
Driven
28
28
40
40
810
45
45
1,001
45
45
1,010
55
50
1,014
55
1,020
1,202
55
50
1,209
55
1,212
72
63
1,218
74
64
1,395
55
50
1,
616
804
1,766.1
63.5
Unit (mm)
1,149.2
.1
Tooth width T
Outer dia.
1,
44.5
DK100Z125M
1,
DK175Z175M
.1
63.5
DK100Z175M
70
1,400
55
DK120Z175M
75
1,404
DK140Z175M
82
1,410
DK160Z175M
86
1,412
DK200Z175M
97
1,420
.1
.1
1,340.7
.1
.1
.1
No. of teeth : 24
Unit (mm)
Tooth width T
Roller dia.
Pitch dia.
Outer dia.
Dp
Do
Driving
Driven
38.1
1,583.8
1,616
29
29
1,804
42
39
50.8
1,810
47
43
DK150Z125M
50.8
1,001
47
43
DK175Z125M
63.5
1,010
56
50
DK100Z125M
70.5
1,014
65
57
DK120Z125M
75.5
1,020
72
63
DK175Z150M
63.5
1,202
56
50
DK100Z150M
70.5
1,209
65
57
DK120Z150M
75.5
1,212
72
63
DK140Z150M
82.5
1,218
74
64
DK175Z175M
63.5
1,395
56
50
DK100Z175M
70.5
1,400
65
57
DK120Z175M
75.5
1,404
72
63
DK140Z175M
82.5
1,410
74
64
DK160Z175M
86.5
1,412
82
70
DK200Z175M
97.5
1,420
84
72
Chain No.
DK1319076M
DK1328076M
DK135Z100M
DK1332100M
DK150Z100M
125
DK175Z125M
DK1323100M
100
Pitch dia.
50.8
Pitch
76.2
Roller dia.
DK150Z125M
No. of teeth : 24
44.5
1,766.1
1,957.7
1,149.2
1,340.7
326
Unit (mm)
L1
L2
50
85
75
30
45
65
110
75
30
45
65
85
140
100
40
60
85
110
180
130
50
80
110
145
225
170
70
100
145
180
270
200
90
110
180
225
340
235
110
125
225
260
400
270
120
150
260
315
480
300
130
170
50<
Hub width
Unit (mm)
Unit (mm)
3.2
dimension
t
3.2
12 8.0
1510.0
1812.0
2013.0
2416.0
2818.0
3220.0
3522.0
3824.0
4226.0
4528.0
5031.5
5635.5
6340.0
7145.0
8050.0
d
<
40
50
60
70
80
95
110
125
140
160
180
200
224
250
280
315
Key slot
b
50
60
70
80
95
110
125
140
160
180
200
224
250
280
315
355
327
12
15
18
20
24
28
32
35
38
42
45
50
56
63
71
80
t
3.5
5.0
6.0
6.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.5
17.5
20.0
22.5
25.0
0.6
1.0
1.6
2.5
dimension
12 8
14 9
1610
1811
2012
2214
2514
2816
3218
3620
4022
4525
5028
5632
6332
7036
8040
d
<
38
44
50
58
65
75
85
95
110
130
150
170
200
230
260
290
330
44
50
58
65
75
85
95
110
130
150
170
200
230
260
290
330
380
Photo/ Sprocket
Hub dia.
Key slot
b
12
14
16
18
20
22
25
28
32
36
40
45
50
56
63
70
80
3.3
3.8
4.3
4.4
4.9
5.4
5.4
6.4
7.4
8.4
9.4
10.4
11.4
12.4
12.4
14.4
15.4
0.4
0.6
1.0
1.6
2.5
Sprocket
Photo / Sprocket
PAT.
Any damage on the teeth surfaces of a sprocket diminishes the life of the conveyor chain.
With conventional sprockets, considerably worn sprocket teeth were repaired by teeth padding or the entire sprocket
was replaced. In either case, repair was costly and with teeth padding, accuracy was impaired. We developed new
sprockets with detachable teeth for independent replacement. This sprocket is highly rated by our customers for the
dramatic savings in cost and time.
Structure
Sprocket
Photo/ Sprocket
ne
pla
ing
d
i
v
Di
328
memo
329
Technical Data
Chain Selection
Chain Selection
To fully exhibit its superb features, a chain conveyor must match the application. Select the most suitable chain by
accurately identifying the characteristics of the chain conveyor system and service conditions (types and properties of
the load, conveyance capacity, speed, distance, service environment, etc.).
Refer to the selection flowchart below, and the details on each step of the selection procedure.
Selection Flowchart
Though comprehensive knowledge and experience are required for selecting chains, a general selection procedure is
described here to assist you in selecting the optimal conveyor chain.
Properties of
load
Conveying
purpose
P338
how much
from where to where
Type of conveyor
See photos on P308 ~ P313.
Calculation
of chain
tension
Selection of
chain pitch
Type and
strength of
attachments
Type and
strength of
rollers
Properties of
load
P330
P282
P337
P222
P337
P338 ~ P339
Maintenance
P341
P343
P340
P343
Chain Selection
Technical Data
Installation :
Lubrication:
Rust prevention :
Service limit :
330
2) Influence of freezing
At low-temperature, bending failure, roller rotation failure,
fixing of chain, etc. may be caused by the freezing of
penetrated water or deposited frost in the clearance between
pins and bushings, bushings and rollers or inner plates and
outer plates. These conditions cause an overload to act on
the chain and drive, diminishing the life of the chain.
331
Chain Selection
Technical Data
Technical Data
Chain Selection
Lubrication intervals
It is a general rule to lubricate about once a week, but
depending on the conditions during operation and the
state of lubricating oil, lubricate as needed.
As lubrication methods, coating or drip lubrication is
recommended. As for the locations of lubrication, see
the following illustration.
For effective lubrication, clean the chain before
lubrication. Select a lubrication method suitable for the
specific service condition.
Lubrication
Automatic lubrication (oiling) device
We have various automatic lubrication (oiling) devices.
Consult us if you are using chains in a setup where
lubrication is difficult or if you plan to automate
lubrication.
Lubricating oils
Temperature
SAE30
-10C ~ 0C
SAE40
0C ~ 40C
Technical Data
SAE
Chain Selection
332
Specifications of conveyor
Unit
T :
Q :
S :
V :
H :
L :
M :
f1 :
f2 :
:
kW :
g :
W :
kN
t/h
m/min
m
m
m
kg/m
Horizontal
Conveys loads on it
Slat conveyor, apron
conveyor, etc.
Formula
T(W2.1ML)f1
kW
kW
Conveys by scraping
Continuous flow conveyor,
scraper conveyor, etc.
Vertical
Conveys loads on it
Bucket elevator,
tray elevator, etc.
TS
5,320
T(16.7
Bulk
kW
Countable
object
Q
g
2.1M)Lf1
S
1,000
TS
5,320
T(16.7
Bulk
Q
g
f22.1Mf1)L
S
1,000
TS
52.2
T(WML)
kW
WLS
52.2
g
Q
M)(L2)
1,000
S
TS
kW
52.2
T(WML)
Countable
object
Conveys loads on it
Slat conveyor,
apron conveyor, etc.
g
Q
M)(Hf1V) 1,000
S
g
1.1M(Hf1V) 1,000
g
S
kW
{TM(VHf1) 1,000 }
52.2
T16.7
Bulk
g
Hf1V
1,000
L
g
1.1M(Hf1V) 1,000
g
S
kW
{TM(VHf1) 1,000 }
52.2
T(16.7
Bulk
Conveys by scraping
Continuous flow conveyor,
scraper conveyor, etc.
g
1,000
T(16.7
Bulk
Gradient
g
1,000
g
Q
(Hf2V) 1,000
S
g
M(Hf1V) 1,000
g
1.1M(Hf1V) 1,000
g
S
kW
{TM(VHf1) 1,000 }
52.2
333
Technical Data
Conveyor layout
L (m)
kg
Chain Selection
Countable objectW
kW
Technical Data
Chain Selection
Coefficient of Friction
Value of coefficient of friction f1
Table 1
Coefficient of friction for chains with
rollers running on guide rails
Note: 1.The value may depend on the
service temperature, etc.
2.The listed values are for ambient
temperature.
Table 2
Coefficient of friction for chains with
plates sliding on guide rails
Roller dia.
D50
50D65
65D75
75D100
100D
Without rollers (when bushings slide on a rail)
Rollers with built-in bearings
With lubrication
Without lubrication
0.15
0.20
0.14
0.19
0.13
0.18
0.12
0.17
0.11
0.16
0.20.3
0.300.45
0.0350.050
Temperature (C)
With lubrication
Without lubrication
0.20
0.30
400600
0.30
0.35
600800
0.35
0.40
8001000
0.45
Load to be conveyed
f2
Table 3
Coefficient of friction with loads and
bottom and/ or side plates
Note: Figure f2 is changed by the condition
of grading and/ or humidity
Coal
0.300.70
Coke
0.350.70
Ash
0.450.65
Sand
0.550.90
Sandstone
0.550.70
Ore
0.450.70
Cement
0.600.75
Cereal
0.350.45
Limestone
0.350.55
Chain Selection
Technical Data
Safety factor
Ks by chain
speed
Ks
Chain speed
Safety factor Ks
30m/min or less
7 or more
3040m/min
8 or more
4050m/min
9 or more
5060m/min
10 or more
Service factor Ke
Service
factor
Ke
1.0
1.2
Fair
1.2
1.4
Bad
1.52.0
1.82.5
Specifications
Conveyor type
Max. conveyance capacity
Conveyance speed
Horizontal center distance between sprocket shafts
Scraper installation intervals
Weight of traveling components
Weight of scraper
Weight of chain
Scraper conveyor
Q 100 ton/h
S 20 m/min
L 30 m
600 mm
M W1W2
W130 kg/m
W2
Calculation
Apply the formula for horizontal conveyance by scraping shown in the table on P333.
g
Q
Max. chain tension T (16.7 S f22.1Mf1)L 1,000
TS
Required power kW
52.2
When the values of the above specifications are applied to these formulas,
100
9.80665
T (16.7 20 0.62.1500.2)30 1,000
21 kN
The value of T obtained here is a tension acting on two strands. So, the chain tension per strand is T/2.
Since the conveyance speed (chain speed) is 20 m/min, the safety factor Ks is 7 from the table of P334.
Furthermore, for an 8-hour operation per day with no lubrication, the service factor Ke is 1.5 from the table on P334.
Therefore, Standard Conveyor Chain DK11150F standard version can be tentatively selected as it satisfies the
average tensile strength.
Then, an accurate calculation can be done with the actual weight of the selected chain.
This chain has Attachment A2 for every four links. From the dimension tables on P229, the values for the components
are as follows:
Chain body weight
Attachment weight
Attachment installation intervals
Hence,
0.24
Weight of chain 7.90 0.60 8.3 kg/m/strand
Weight of traveling parts M308.3246.6 kg/m
Therefore, the maximum service chain tension is
100
9.80665
T(16.7 20 0.62.146.60.2)30 1,000
Technical Data
21
Required chain strength 2 71.5110 kN
Chain Selection
20.5 kN
Technical Data
Chain Selection
Selection case !
A conveyor chain for bucket elevator conveying a powder vertically
using buckets.
Specifications
Conveyor type
Max. conveyance capacity
Conveyance speed
Horizontal center distance between sprocket shafts
Weight of bucket
Weight of chain
Calculation
Chain Selection
Technical Data
Apply the formula for horizontal conveyance by scraping shown in the table on P333.
Weight of traveling components per 1m MW12W260 220100kg/m
g
Q
Max. chain tension T (16.7 S M)(L2) 1,000
T(L2)
Required power
kW
320
When the values of the above specifications are applied to these formulas,
250
9.80665
T (16.7 25 100)(202) 1,000
57.6 kN
The value of T obtained here is a tension acting on two chain strands. So, the chain tension per stands is T/2.
Since the conveyance speed (chain speed) is 25 m/min, the safety factor Ks is 7 from the table of P334.
Furthermore, for an 12-hour operation per day with no lubrication, engendered by poor environment, the service
factor Ke is 1.8 from the table on P333.
57.6
Required chain strength 2 71.8362.9 kN
Therefore, NE Bucket Elevator Chain DK35Z250M can be tentatively selected as it satisfies the average tensile
strength.
Then, an accurate calculation can be done with the actual weight of the selected chain.
Since the mass of this chain with Attachment G4 on every two links is 15kg from the dimension table on P287,
Weight of traveling components M6015290 kg/m
Therefore, the maximum service chain tension is
250
9.80665
T(16.7 25 90)(202) 1,000
55.4 kN
336
Technical Data
Vertical loads from the weight of loads and slats etc. are
applied on Attachment A. The allowable vertical load per
attachment is as shown in the following table.
When the load is received by the rollers, use a roller with
an allowable load smaller than that of the attachment.
Load
Load
Roller load
R, F-roller
Standard (J)
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
03075
03100
03125
03150
07075
07100
07125
07150
09100
09125
09150
11100
11125
11150
11200
13150
13200
19200
19250
19300
25200
25250
25300
32200
32250
32300
32450
50250
50300
50450
50600
65300
65450
05101
08066
08101
09101
11152
13101
19152
25152
Standard (A)
Heavy-duty
S, M-roller
Chain No.
Standard Heavy-duty
0.5355 0.8890
0.5355
0.981001.56160
0.98100
1.371402.25230
1.47150
1.761802.94300
1.96200
2.452504.11420
2.45250
2.452504.11420
2.74280
4.314407.15730
4.51460
5.395508.92910
5.58570
7.4576012.31,260
7.45760
8.9291014.81,510
9.31950
12
3
0.981001.66170
1.17120
1.271302.15220
1.27130
1.561602.54260
1.661702.84290
2.052103.43350
2.452504.02410
3.043105.09520
1.56160
1.66170
2.05210
2.74280
3.23330
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
DK
03075
03100
03125
03150
07075
07100
07125
07150
09100
09125
09150
11100
11125
11150
11200
13150
13200
19200
19250
19300
25200
25250
25300
32200
32250
32300
32450
50250
50300
50450
50600
65300
65450
05101
08066
08101
09101
11152
13101
19152
25152
337
Standard (J, A)
Heavy-duty
0.78 80
0.83 85
0.98 100
1.07 110
1.07 110
1.17 120
1.37 140
1.56 160
1.76 180
2.05 210
2.25 230
1.56 160
1.86 190
2.05 210
2.25 230
2.94 300
3.62 370
3.92 400
5.58 570
7.25 740
4.21 430
5.97 610
7.74 790
3.92 400
5.58 570
7.15 730
10.78 1,100
4.31 440
5.58 570
8.42 860
10.38 1,060
6.37 650
10.38 1,060
1.37 140
0.98 100
1.76 180
1.86 190
2.05 210
3.13 320
3.33 340
4.21 430
1.17 120
1.27 130
1.47 150
1.66 170
1.76 180
1.86 190
2.15 220
2.45 250
3.23 290
3.23 330
3.62 370
2.54 260
2.94 300
3.33 340
3.72 380
4.70 480
5.78 590
6.27 640
8.91 910
11.561,180
6.27 640
8.91 910
11.561,180
5.78 590
8.23 840
11.661,190
15.971,630
4.31 440
5.58 570
8.42 860
10.381,060
6.37 650
10.381,060
2.25 230
1.56 160
2.74 280
3.03 310
3.33 340
4.99 510
5.29 540
6.27 640
Technical Data
Allowable Load
Roller load
Load
Technical Data
338
Recommended
chain spec
Pan conveyor
Scraper conveyor
Bucket elevator
Continuous flow
conveyor
0.60.8
0.71.6
1.31.9
1.31.5
0.91.1
0.30.6
1.51.8
1.22.0
0.70.9
0.91.4
0.61.3
0.50.8
0.60.9
1.11.3
0.81.0
1.31.7
0.50.7
0.50.6
0.50.6
0.10.4
0.20.3
0.30.4
0.10.3
0.40.6
0.91.5
1.11.6
0.71.0
0.91.2
0.50.7
0.60.9
0.81.2
0.51.3
0.71.0
0.81.3
0.81.0
0.71.2
1.01.3
0.70.8
0.60.7
0.70.8
0.40.7
0.70.8
0.71.0
0.91.0
0.40.7
0.20.3
0.10.2
0.81.0
0.91.3
0.40.6
Wear
Corrosion
Adhesion
Bentonite
Fly ash
Magnesia clinker
Brick stone scraps
Soda ash (dense)
Soda ash (light)
Casting sand
Crushed stone and gravel
Raw material of ferrite
Porcelain clay
Carbide
Urea
Glauber's salt
Anhydrous sodium sulfate
Sulfur powder
Cullet
PVC powder
Plastic powder
Synthetic detergent
Carbon black
Fine powder carbon
Rubber powder
Wood chips
Raw materials of agricultural chemicals
Phosphorus ore (powder)
Phosphorus ore (lumps)
Phosphorus sulfide (powder)
Ammonium phosphate
Ammonium chloride (powder)
Ammonium chloride (grains)
Ammonium sulfate
Potassium sulfate
Potassium chloride
Lime nitrogen
Calcium superphosphate
Compound fertilizer
Fused phosphate
Rice
Barley
Wheat
Wheat flour
Soybean
Corn
Malt
Starch
Sugercane
Bagasse
Sugar
Salt (dry)
Mixed feed
Apparent
specific
gravity
K
K
K
A
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
SH
SH
SH
K
K
D1
A
A
D1
A
K
A
K
A
K
A
A
A
A
A
A
K
A
K
K
D2
D2
A
D2
A
K
Non-metal
Loads
Fertillizer
Scraper conveyor
Wear
Corrosion
Adhesion
Properties
0.81.2
0.81.2
0.81.0
1.21.6
0.71.0
0.61.2
1.21.6
1.01.4
0.91.0
0.50.6
0.71.2
0.40.7
1.51.8
0.51.4
1.11.5
1.01.5
1.01.6
1.11.6
1.71.8
0.60.9
0.50.7
1.01.4
Recommended
chain spec
1.62.4
1.62.6
1.62.6
0.40.6
1.31.5
0.91.2
1.01.9
1.52.5
0.91.3
0.41.0
0.61.0
1.61.8
1.61.8
1.62.1
1.01.2
1.01.5
0.61.5
0.81.2
0.30.6
0.51.0
0.60.7
0.50.8
0.50.8
0.30.8
0.61.0
0.60.8
0.40.8
Apparent
specific
gravity
Bucket elevator
Recommended
Specifications
Technical Data
Waste
Coal
Loads
Properties
Pan conveyor
The following table shows chain specifications for loads in general. A specific powder or granular material belonging to
the same category in the following table may differ in physical properties, depending on the place of production,
manufacturer, grain form, storage condition, supply condition, temperature, humidity, etc. Confirm all the properties of
the specific load when selecting the conveyor type and chain.
A
K
K
K
A
A
K
K
A
K
A
S4
S4
S4
A
K
A
A
A
K
K
A
A
SH
K
K
A
A
A
A
A
SH
SH
SH
SH
SH
K
A
A
A
A
A
A
A
A
A
A
S4
S3
A
A
Technical Data
Corrosion of metal
When a metal is exposed to a corrosive environment,
various phenomena occur. Above all, stress corrosion
cracking, hydrogen embrittlement cracking, pitting
corrosion etc. can cause serious accidents, and sufficient
preventive measures must be taken.
1) Stress corrosion cracking
Stress corrosion cracking occurs when corrosive
action and static stress work simultaneously. When a
metal is gradually affected as in ordinary corrosion,
the timing of replacement can be relatively easy to
predict. However, stress corrosion cracking causes
sudden brittle fracture, and is a serious problem.
In general, most industrial alloys may crack in any
environment. The corrosive materials most likely to
cause stress corrosion cracking are chlorine and
Stainless steel
S4
S3
(pH3)
(pH3)
339
Technical Data
Medium
Corrosion Resistance
Technical Data
Features
Application
P oil
NP-2
NP-1
NP-19
Transparent semi-drying
For spare chain components
powerful JIS rust prevention oil
Coating
Stainless steels
Stainless steels can be classified into four types, austenitic stainless steel, ferritic stainless steel, martensitic
stainless steel, and quench hardened stainless steel.
Classification and features of stainless steels
Name in reference to main elements
Technical Data
Typical steels
SUS 304
SUS 316
SUS 430
Heat treatment and features All the alloy elements are melted
into the base metal at a
temperature higher than 1000C,
and the mixture is quenched.
(Solution treatment) The steel is
excellent in corrosion resistance
and high enough in ductility to be
cold-worked.
SUS
SUS
SUS
SUS
403
410
420
431
SUS 630
Corrosion resistance
High
Low
Low
Hardness
Low
Low
High
High
Viscosity
Large
Large
Large
Low
Low
Large
Large
Wear resistance
Cautions
Corrosion Resistance
Applications
SUS304, a typical austenitic stainless steel, is considered to be non-magnetic, but when used in chains, since it is coldworked and extensively processed to achieve high-strength, it is slightly magnetic. Since the magnetism is extremely
weak compared to that of iron and steel, the chain can be used for ordinary applications without any problem. However,
consult us for an application very sensitive to magnetism such as the production of electronic parts.
340
Technical Data
Levelness
(Deviation angle)
Conveyor chain center line
1. Pull out the pin from one end of the chain, and place
the chain in alignment with the pin holes of the inner
and outer plates. (Photo 1)
2. Insert the pin into the plate hole. (Photo 1)
3. Apply one hammer to the back of the plate on the
other side, and insert the pin by hitting it with another
hammer. (Photo 2)
4. Insert a T-pin into the pin hole, and bend it by a wrench
etc. to secure it in position. (Photo 3 and 4)
(Cautions)
1. Confirm the feeding direction of the chain, the
positions of attachments etc. before connecting.
2. When hammering in the pin, do not grind the pin to
make the process easier. A ground pin will cause
various troubles.
3. After completion of chain connection, confirm whether
the chain can bend smoothly.
341
Maintenance
Misalignment of sprockets
Technical Data
Technical Data
Timing of Adjustment
At the beginning of operation, a chain causes initial
elongation, and subsequently is elongated due to steady
wear. Usually the components of a chain are hardened
on the surface, and if the hardened layer is exhausted,
elongation progresses rapidly. So, periodical checks are
necessary.
Once daily
Once weekly
Twice monthly
No chain stripper
(Cautions)
Also for a chain with tension automatically adjusted by
counter weight take-up or spring take-up, confirm
whether the tension device functions properly.
When high-temperature articles are conveyed, be sure to
adjust the take-up since the chain expands or contracts
remarkably when the conveyor is started or stopped.
Technical Data
Inspection window
Clearance
Tooth of sprocket
Deposition of conveyed object
Maintenance
Check Point
Chains sag generally at one place. Therefore, confirm at
first what point of the conveyor should be checked.
Furthermore, ensure the safety of the area to be checked.
342
Lubrication
Pitch elongation
A chain is bent when it engages with the sprockets or at
corners, and the mutual wear between pins and bushings
causes the entire length to be elongated. If the elongation
becomes excessive, the engagement between the chain
and the sprockets becomes less smooth and troubles
occur.
Limit of chain elongation is 2 % of nominal pitch.
Measure chain elongation where tension is applied.
Usually, measure from the head of one pin to the head of
another, using a tape measure. Measure the length of four
pitches or more.
Temperature
SAE30
-10C ~ 0C
SAE40
0C ~ 40C
Fatigue limit
A chain receives varying loads repetitively every cycle.
Long-term use causes plates, pins, etc. to reach their
fatigue limit, resulting in cracking and then fracture. This
is the service limit.
Bushings
When the thickness of bushings become 40% of the
original dimension due to wear.
343
Maintenance
Plates
Technical Data
Wear loss
Date of inquiry:
Year
Month
]
Day
Name
Department
Company name
TEL
FAX
Address
Manufacturer
Manufacturer
Service conditions
Abrasiveness
With / without
Adhesion
With / without
DimensionsMass
Motor used
AC / DC
kW
units
rpm
Chain pitch
mm
kg/pc.
kNkgf
kg
Roller type
t / hr
Chain
Conveyed quantity
Service conditions
Detail
S / M / R / F / Special
Machine length
Lifting height
Conveyance speed
m / min
PCD
mm
PCD
Tolerance: H7 / H8 / Other
Other
Hr / day
days/year
Sprocket
Conveyed material
Machine concerned
Yes
No
Hub form
Type A / B / C
Key groove
Tooth Finish Precision fusion cutting / Mechanical toothed wheel cutting / Induction hardening / Hard facing
Operating hours
Parallel or Tapered
344
Glossary
Terms such as average tensile strength, minimum tensile strength, maximum allowable tension, and table of
maximum horsepower ratings are important terms that indicate the performance of chains, and are often
used in the text and table of chain dimensions in this catalog. Frequently used terms are explained below.
1. Average tensile strength
We conduct a test where a chain is pulled at both ends with a gradually increasing load until it breaks.
The maximum load in this case is called the tensile strength of the chain. The average tensile strength is
obtained by repeating this test. Since the average tensile strength is not a guaranteed value, it cannot be
used for calculation of safety factor.
2. DID minimum tensile strength
This is our guaranteed tensile strength. Therefore, our chains all have tensile strengths exceeding this
value. Use it for strength calculations such as to obtain safety factor. This value is decided on the
conservative side, based on statistical processing of numerous tensile strength data and experience.
3. JIS minimum tensile strength
This is the strength value required for a chain conforming to JIS B 1801.
Since our factory is authorized to use the JIS mark, the minimum tensile strengths of all DID chains
exceed JIS minimum tensile strengths.
4. Maximum allowable tension
"Slow-speed selection" (see P121) is a method for selecting chains that uses the maximum allowable
tension for the criterion of safety. The maximum allowable tension is decided on the more conservative
side than the fatigue limit. Fatigue fracture will not occur if a load less than this value is repeatedly
applied.
Technical Data
345
Technical Data
Chain Selection
International System of Units (SI)
The international system of units has been in use since Oct. 1, 1999. The units in our catalogue include SI units and old
units. Use the values in old units as reference.
SI unit
SI Indication
Weight
SI Conversion
Kg (kilogram)
1000P
60000P
2ns
2nm
: Torque (Nm)
ns : rpm (s1)
Power
N (newton)
1kN1000N
(kilonewton)
nm : rpm (min1)
2. Relation of required power, power and speed
Torque moment
Nm (newtonmeter)
Pa (pascal)
1
1Pa 1,000,000 N/mm2
(pascal)
1
10,000 N/cm2
FV
1000
: Power (N)
: Speed (m/s)
: Efficiency
Stress
1MPa 1000kPa
(megapascal)
1kPa 1000Pa
(kilopascal)
1hPa 100Pa
(hectopascal)
(pressure)
I2ns
I2nm
t
60t
ns : rpm (s1)
Work energy
Work rate
J (joule)
S (second)
1Nm1J
(joule)
1W1J/s1Nm/s
(watt)
nm : rpm (min1)
t
: Downtime (s)
Technical Data
1
E 2 mV2
E
m : Weight (kg)
V
346
: Speed (m/s)