Professional Documents
Culture Documents
Backing Run
(backing or back weld
in US)
Steep-flanked
Single Bevel
Butt Welds
Steep-flanked
Single-V Butt Welds
Elementary Symbols
(Spot Welds and Seam Welds)
Spot Weld
Seam Weld
Elementary Symbols
(Edge Welds and Surfacing Welds)
Edge Welds
Surfacing Welds
Elementary Symbols
(Surface, Inclined and Fold Joints)
Surface Joint
Inclined Joint
Fold Joint
Supplementary Symbols
Flat
Convex
Concave
Supplementary Symbols
Toes shall be blended smoothly
Dimensioning of Welds
The size of the weld is located on the lefthand side of the symbol
The length of the weld is on the right-hand
side of the symbol
leg length
Dimensioning of
Intermittent Fillet Welds
Where
l = length of weld
n = number of weld elements
(e) = distance between adjacent weld elements
Dimensioning of Staggered
Intermittent Fillet Welds