This document provides instructions for drawing free body diagrams to solve several mechanics problems involving forces on structural members, eyebolts, and spheres. Students are asked to draw FBDs and determine relevant forces and reactions for 5 problems involving derricks, frames, eyebolts, and spheres on inclined surfaces. The key is to isolate the component or joint of interest and draw all external and reaction forces to find equilibrium.
This document provides instructions for drawing free body diagrams to solve several mechanics problems involving forces on structural members, eyebolts, and spheres. Students are asked to draw FBDs and determine relevant forces and reactions for 5 problems involving derricks, frames, eyebolts, and spheres on inclined surfaces. The key is to isolate the component or joint of interest and draw all external and reaction forces to find equilibrium.
This document provides instructions for drawing free body diagrams to solve several mechanics problems involving forces on structural members, eyebolts, and spheres. Students are asked to draw FBDs and determine relevant forces and reactions for 5 problems involving derricks, frames, eyebolts, and spheres on inclined surfaces. The key is to isolate the component or joint of interest and draw all external and reaction forces to find equilibrium.
Problems For problems 2.28 through 2.33, draw FBDs. 2.28 The small derrick shown on the right consists of two posts, AB and BC, supporting a weight W = 1,000#. Find the reactions RA and RC .
2.29 Two members AC and BC are pinned together at C
to provide a frame for resisting a 500 N force as shown. Determine the forces developed in the two members by isolating joint C.
2.30 An eyebolt at A is in equilibrium under the action of
the four forces shown. Determine the magnitude and direction of P.
2.31 A sphere weighing 2.5 kN has a radius r = 0.15 m.
Assuming the two supporting surfaces are smooth, what forces does the sphere exert on the inclined surfaces? Note: Reactions on round objects act perpendicular to the supporting surface and pass through the center of the object.