Professional Documents
Culture Documents
The products in this section complement the core product ranges within this
product selector and are generally required when installing them. JDP aim to
give the House Builder a
one stop shop whilst
retaining a specialist
service and knowledge
in the products that it
supplies.
203
Building Materials
Cement
JDP offers a range of cements for civil engineering,
building applications, ready-mixed concrete, and
concrete products.
Features & Benefits
Consistent strength meeting all the conformity
criteria in BS EN 197-1
Compatible with admixtures
Applications
For use as a bonding ingredient for mortar mix
or concrete
Code
Description
Uses
1806CEMENT
1806PROCEM
1806MASTERCRETE
1806CEMENTWH
1806SULFACRETE
1806MORTAR
1806EXTRARAPID
1806POSTCRETE
204
Aggregates
JDP offers a wide range
of aggregates that are
durable and versatile.
Aggregates can be used
in a wide variety of
applications including
concrete and asphalt
production, sub-base,
capping and drainage
systems as well as for
decorative purposes.
Product name
Whats it like?
Whats it for?
205
Whats it like?
Whats it for?
Building Sand
Crusher Run
Quarry Scalpings
Building Materials
Product name
6F Capping Materials
Type 1 Granular Sub-Base
Walling Stone
Armour Stone
Gablon Stone
Rockery Stone
Single-sized gravels.
Eversley Gold
206
Reinforcing Mesh
JDP supply reinforcing mesh for general concreting applications.
Mesh Size
Nominal Pitch
of Wires
Wire
Sizes
Cross Sectional
Area per
Metre Width
Cross
Nominal
Weight Sheets
per m2 per
Sheet
tonne Weight
(kg)
(approx) (kg)
BS
Reference
Main
Cross
Main
Cross
Main
10mm
A393M
200mm
200mm
10mm
393mm
393mm2
6.16
23
44.35
26
162.34
A252M
200mm
200mm
8mm
8mm
252mm2
252mm2
3.95
35
28.44
30
253.16
A193M
200mm
200mm
7mm
7mm
193mm2
193mm2
3.02
46
21.74
50
331.31
A142M
200mm
200mm
6mm
6mm
142mm2
142mm2
2.22
63
15.98
50
450.45
B785M
100mm
200mm
10mm
8mm
785mm2
252mm2
8.14
17
58.61
20
122.85
Square
Sheets Metres
per
per
Bundle tonne
Concrete Blocks
JDP offer a range of standard concrete blocks for the building and civil engineering market.
207
Building Materials
Code
Description
Size (mm)
1801100X215MBLK
1801140X215MBLK
Standards
BS EN 771-3 which covers the BS requirements of all types of concrete block (and brick) units
Installation Guide
Careful selection of mortar is essential. Extensive guidance is given in the BS 5628 suite of masonry design
standards. The location of the block work is an important consideration, and as a guide stronger mortars
will be required in high exposure situations. Similarly the design of walls employing high strength blocks,
typically 10N/mm or greater, will result in enhanced load bearing capacity when designation (ii) or (i) mortar
mixes are used. However, for the construction of most internal walls in inner leaves of cavity walls above
ground, it is common practice to specify mortars no stronger than 1:1:6 cement, lime, sand composition or
similar designation (iii) mix or general purpose to BS 5628-3.
All types of aggregate block are suitable for use to the inner leaf of external cavity walls, or internal walls
below ground. For the external leaf of external cavity walls, or solid external walls, dense, lightweight
7/mm2 blocks or aggregate block with a density of at least 1500kg/m3 are all suitable. Where unusual
ground conditions exist, or for more information contact your local JDP branch.
208
Lintels
JDP offer a range of Prestressed and high strength lintels. The Prestressed lintel is one of
the most specified lintel ranges in the country. The method of manufacture gives a high
performance pre-stressed concrete unit designed to be used in plastered situations. This range
can also be used as ground beams being able to be used directly off pad foundations saving
you time and money. If used in conjunction with our steel lintel can comply with part E: 2002
and Part L: 2002 to solve thermal bridging and acoustic problems.
209
Description
Size (mm)
1806CL10065600
100 x 65 x 600
1806CL10065900
100 x 65 x 900
1806CL100651200
100 x 65 x 1200
1806CL100651500
100 x 65 x 1500
1806CL14065900
140 x 65 x 900
1806CL140651200
140 x 65 x 1200
1806CL140651500
140 x 65 x 1500
1806CL22065900
220 x 65 x 900
1806CL220651200
220 x 65 x 1200
1806CL220651500
220 x 65 x 1500
Building Materials
Code
Lintels are available to suit a wide range of applications, using the following criteria:
Wall Thickness
Clear Span
Fire resistance
Finish
Standards
The design of prestressed concrete lintels complies with BS8110 part 1:1997: section 4
Lintels are manufactured in accordance with BS5977: part 2:1983
Materials used in the manufacture of prestressed lintels comply with BS12 and BS882
The prestressing strand/wire complies with BS5896
Installation Guide
Lintels should be carefully bedded on a full mortar joint.
Wall ties should be positioned in accordance with current building regulations.
A damp proof course should be used for all lintels in external walls, and must be fixed in accordance with
building regulations.
In cavity construction, it is recommended that both internal and external leaves be taken up uniformly.
For spans in excess of 1200mm, it is good practice to provide temporary support (at 1200mm centres). If
lintels are supporting concrete floor load, a minimum lintel depth of 140mm is recommended to allow for
impact loads during the actual placing of concrete flooring.
Cutting
Concrete lintels may be cut using a high-speed disc cutter. Use of this should be by a properly trained
operative taking due regard of current Health and Safety regulations.
210
Ventilation Products
JDP supply plastic ventilation products for use in general building applications, in line with
building control regulations.
Code
1806G930TR
211
Description
G930TR Plastic Airbrick Terracotta
1806G935
1806G960
1806G961
1806G962