The Bosch PAViRO - PVA-1WEOL End of line module is used to monitor loudspeaker lines for short circuits or open wires. It works with an EOL Master module in routers to continuously monitor loudspeaker line integrity. The EOL module is required for applications with continuous background music, complies with EN54-16 standards, and can be attached directly to loudspeakers. It can detect wire breaks on 100V or 70V loudspeaker lines using less than 20mW of power and can monitor up to 30 modules on one zone output without needing return wires.
The Bosch PAViRO - PVA-1WEOL End of line module is used to monitor loudspeaker lines for short circuits or open wires. It works with an EOL Master module in routers to continuously monitor loudspeaker line integrity. The EOL module is required for applications with continuous background music, complies with EN54-16 standards, and can be attached directly to loudspeakers. It can detect wire breaks on 100V or 70V loudspeaker lines using less than 20mW of power and can monitor up to 30 modules on one zone output without needing return wires.
The Bosch PAViRO - PVA-1WEOL End of line module is used to monitor loudspeaker lines for short circuits or open wires. It works with an EOL Master module in routers to continuously monitor loudspeaker line integrity. The EOL module is required for applications with continuous background music, complies with EN54-16 standards, and can be attached directly to loudspeakers. It can detect wire breaks on 100V or 70V loudspeaker lines using less than 20mW of power and can monitor up to 30 modules on one zone output without needing return wires.
The End Of Line (EOL) Slave Module shall be used to monitor the integrity of a loudspeaker line. In combination with an EOL Master, integrated into the systems routers of the system, it shall be possible to permanently monitor/protect the loudspeaker line against short or open circuits. The End of Line module shall be required in applications where continuous business music is requested. The EOL module shall be EN54-16 compliant, and shall be designed to fit direct on loudspeakers. Additional the end-of-line features shall include: Detection of wire break or cable break. Compatible with 100 V, 70 V loudspeaker lines. Powering of the module via loudspeaker line. Multiple modules at one loudspeaker line shall be possible. Power consumption < 20 mW. It shall be possible to connect up to 30 modules to one zone output. Powering of the module via loudspeaker line. No return wires shall be needed, only a local connection ground shall be required. Operational frequency range : 18-24Khz (shall be configurable by configuration software). Operating temperature -5 C to +45 C. Product dimensions (Width x Height x Depth) 78 x 15 x 60 mm.