Professional Documents
Culture Documents
Anti Vibration Pads
Anti Vibration Pads
Specifications :
Y
Alternate High/Low Ribbed Construction.
Y
Easy to Cut Pads can be cut to be slightly larger than the size of the leg or machine, using
shears or knife.
Y
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to increase deflection.
Y
Ribbed Mounting Pad
Model
No.
Size
Inches
EFRMP381818
EFRMP381212
EFRMP380808
EFRMP380606
EFRMP380404
EFRMP380303
3/8" x 18"
3/8" x 12"
3/8" x 8"
3/8" x 6"
3/8" x 4"
3/8" x 3"
x
x
x
x
x
x
18"
12"
8"
6"
4"
3"
Load (PSI)
Load (kg/cm2)
12960
5760
2560
1440
640
360
911
404
180
101
45
25
Specifications :
Y
Designed with in built suction cups
Y
Easy Cut design without tools allows job site flexibility
Y
No need for bolting
Y
Easy Field Installation.
Waffle Pads
Model
No.
EFWP381818
EFWP381212
EFWP380808
EFWP380606
EFWP380404
EFWP380303
Size
Inches
3/8" x 18"
3/8" x 12"
3/8" x 8"
3/8" x 6"
3/8" x 4"
3/8" x 3"
x
x
x
x
x
x
18"
12"
8"
6"
4"
3"
Load (PSI)
Load (kg/cm2)
12960
5760
2560
1440
640
360
911
404
180
101
45
25
Y
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Y
To achieve good sound suppression do not over load fitting.
Y
Model
No.
Size
Inches
EFCSP781818
EFCSP781212
EFCSP780808
EFCSP780606
EFCSP780404
EFCSP780303
7/8" x 18"
7/8" x 12"
7/8" x 8"
7/8" x 6"
7/8" x 4"
7/8" x 3"
x
x
x
x
x
x
18"
12"
8"
6"
4"
3"
Load (PSI)
Load (kg/cm2)
16200
7200
3200
1000
860
450
1139
506
225
126
56
31
Specifications :
Y
Metal Sandwich Pads are constructed of a steel plate bonded between Ribbed Anti
Vibration Pads.
Y
Designed for very high load capacity.
Model
No.
Size
Inches
Load (PSI)
Load (kg/cm2)
EFMSP011818
EFMSP011212
EFMSP010808
EFMSP340606
EFMSP340404
EFMSP340303
19440
8640
3840
2160
960
540
1368
607
270
152
67
38
Y
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Y
To achieve good sound suppression do not over load fitting.
Y
Rubber Pads
Selection Procedure :
Y
Compute the total load in kg. to be supported by Easyflex Pads. This includes machine weight and work
load it carries and also concrete or steel base or inertia block if used.
Y
Determine unit loading to suit type of machine and supporting ground structure 23 kg. per square inch
is practical and effective loading and is recommended for most type of machines and equipment for
isolation of sustained vibration.
Y
Divide the static weight by unit load to get total area of Easyflex Pad that is required.
Arrange the total area of into adequate number of pads that are necessary to give stable support and to
Y
avoid base distortion. The area of each pad should be in proportion to the load carried by it so that the
unit loading or stress on all pads will be approximately the same.
Y
The pads should be placed in such way that uniform deflection is obtained. Uniform load distribution
prevents over loading and possible premature failure of some of the mountings, prevents sagging and
enables the machine to maintain the normal horizontal position and make maximum isolation
possible.
Features :
Y
Scientifically designed resilient material that isolates shock and all the six modes of Vibration and
reduce acoustic noise.
Y
They give more deflection than any other material i.e. cork, felt etc.
Y
They are cheaper than metal springs and have greater sound insulation ability.
Y
They are highly resistant to oil, cleaning compounds, dirt, water, strength, heat aging and fatigue.
Y
These are mostly used for machine tools, production equipments, heating and ventilation equipments,
pumps, generators, compressors, air handling units, fans, under heavy concrete bases, electronics or
sensitive laboratory apparatus, business machines, computers and data processor etc.
Y
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Y
Technical Specifications
450x450
225x225
150x150
100x100
75x75
(3.5 Kgs/cm)
of
of
of
of
of
8
8
8
8
8
mm
mm
mm
mm
mm
4050
1800
800
450
450x450
225x225
150x150
100x100
75x75
(7 Kgs/cm)
of
of
of
of
of
8
8
8
8
8
mm
mm
mm
mm
mm
8102
3600
1600
900
450x450
225x225
150x150
100x100
75x75
(14 Kgs/cm)
of
of
of
of
of
12
12
12
12
12
mm
mm
mm
mm
mm
16200
7200
3200
1800
450x450
225x225
150x150
100x100
75x75
of
of
of
of
of
12
12
12
12
12
mm
mm
mm
mm
mm
20250
9000
4000
2250
DEFLECTION IN INCHES
EFRP-101-A
EFRP-102-B
EFRP-103-C
EFRP-104-D
Y
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Y