Professional Documents
Culture Documents
Osha CFR 1910
Osha CFR 1910
Subpart A -- General
Sec.
1910.1
1910.2
1910.3
1910.4
1910.5
1910.6
1910.7
1910.8
Definitions.
General requirements.
Guarding floor and wall openings and holes.
Fixed industrial stairs.
Portable wood ladders.
Portable metal ladders.
Fixed ladders.
Safety requirements for scaffolding.
Manually propelled mobile ladder stands and scaffolds (towers).
Other working surfaces.
Table of contents.
Coverage and definitions.
Compliance with alternate exit-route codes.
General requirements.
Means of egress, general.
Employee emergency plans and fire prevention plans.
Appendix to Subpart E of Part 1910 -- Exit Routes, Emergency Action Plans, and Fire Prevention Plans
Subpart F -- Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms
1910.66 Powered platforms for building maintenance.
1910.67 Vehicle-mounted elevating and rotating work platforms.
1910.68 Manlifts.
Subpart G -- Occupational Health and Environmental Control
1910.94 Ventilation.
1910.95 Occupational noise exposure.
General requirements.
Eye and face protection.
Respiratory protection.
Head protection.
Foot protection.
Electrical protective devices.
Hand Protection.
Sanitation.
Temporary labor camps.
Nonwater carriage disposal systems. [Reserved]
Safety color code for marking physical hazards.
Specifications for accident prevention signs and tags.
Permit-required confined spaces.
The control of hazardous energy (lockout/tagout).
[Reserved]
[Reserved]
[Reserved]
Air receivers.
APPENDIX A to 1910.178 -- Stability of Powered Industrial Trucks (non-mandatory Appendix to Paragraph (l) of this section.
Subpart O -- Machinery and Machine Guarding
1910.211
1910.212
1910.213
1910.214
1910.215
1910.216
1910.217
1910.218
1910.219
Definitions.
General requirements for all machines.
Woodworking machinery requirements.
Cooperage machinery.
Abrasive wheel machinery.
Mills and calenders in the rubber and plastics industries.
Mechanical power presses.
Forging machines.
Mechanical power-transmission apparatus.
Subpart P -- Hand and Portable Powered Tools and Other Hand-Held Equipment.
1910.241
1910.242
1910.243
1910.244
Definitions.
Hand and portable powered tools and equipment, general.
Guarding of portable powered tools.
Other portable tools and equipment.
1910.252
1910.253
1910.254
1910.255
General requirements.
Oxygen-fuel gas welding and cutting.
Arc welding and cutting.
Resistance welding.
Subpart S -- Electrical
GENERAL
1910.301 Introduction.
DESIGN SAFETY STANDARDS FOR ELECTRICAL SYSTEMS
1910.302
1910.303
1910.304
1910.305
1910.306
1910.307
1910.308
1910.309
Scope.
Training.
Selection and use of work practices.
Use of equipment.
Safeguards for personnel protection.
- 1910.360 [Reserved]
SCUBA diving.
Surface-supplied air diving.
Mixed-gas diving.
Liveboating.
Air contaminants.
Asbestos.
Coal tar pitch volatiles; interpretation of term.
13 Carcinogens (4-Nitrobiphenyl, etc.).
alpha-Naphthylamine.
[Reserved]
Methyl chloromethyl ether.
3,3'-Dichlorobenzidine (and its salts).
bis-Chloromethyl ether.
beta-Naphthylamine.
Benzidine.
4-Aminodiphenyl.
Ethyleneimine.
beta-Propiolactone.
2-Acetylaminofluorene.
4-Dimethylaminoazobenzene.
N-Nitrosodimethylamine.
Vinyl chloride.
Inorganic arsenic.
Access to employee exposure and medical records.
Lead.
Chromium (VI).
Cadmium.
Benzene.
1910.1029
1910.1030
1910.1043
1910.1044
1910.1045
1910.1047
1910.1048
1910.1050
1910.1051
1910.1052
1910.1096
1910.1200
1910.1201
1910.1450
SUBJECT INDEX FOR 29 CFR 1910 -- OCCUPATIONAL SAFETY AND HEALTH STANDARDS
SOURCE: 39 FR 23502, June 27, 1974, unless otherwise noted.
[57 FR 42389, Sept. 14, 1992; 58 FR 4549, Jan. 14, 1993; 58 FR 35308, June 30, 1993; 59 FR 4437, Jan. 31, 1994; 59 FR
36695, July 19, 1994; 59 FR 51672, Oct. 12, 1994; 61 FR 5507, Feb. 13, 1996; 61 FR 9227, March 7, 1996; 61 FR 31427,
June 20, 1996; 62 FR 1493, Jan. 10, 1997; 62 FR 42666, Aug. 8, 1997; 62 FR 48175, Sept. 15, 1997; 62 FR 66275, Dec. 18,
1997; 63 FR 1152, Jan. 8, 1998; 63 FR 13338, March 19, 1998; 63 FR 17093, April 8, 1998; 63 FR 20098, April 23, 1998; 63
FR 33450, June 18, 1998; 63 FR 66270, Dec. 1, 1998; 64 FR 13908, March 23, 1999; 65 FR 46818, July 31, 2000; 68 FR
32638, June 2, 2003; 68 FR 75780, Dec. 31, 2003; 71 FR 10374, Feb. 28, 2006; 76 FR 33606, June 8, 2011; 77 FR 17765,
March 26, 2012]
Authority: 29 U.S.C. 653, 655, 657; Secretary of Labor's Order Numbers 12-71 (36 FR 8754), 8-76 (41 FR 25059), 9-83 (48
FR 35736), 1-90 (55 FR 9033), 6-96 (62 FR 111), 3-2000 (65 FR 50017), 5-2002 (67 FR 65008), 5-2007 (72 FR 31159), 42010 (75 FR 55355), or 1-2012 (77 FR 3912), as applicable.
Sections 1910.6, 1910.7, 1910.8 and 1910.9 also issued under 29 CFR 1911. Section 1910.7(f) also issued under 31 U.S.C.
9701, 29 U.S.C. 9a, 5 U.S.C. 553; Public Law 106-113 (113 Stat. 1501A-222); Pub. L. 11-8 and 111-317; and OMB Circular A25 (dated July 8, 1993) (58 FR 38142, July 15, 1993).
[58 FR 35308, June 30, 1993; 61 FR 5507, Feb. 13, 1996; 61 FR 9227, March 7, 1996; 62 FR 29668, June 2, 1997; 62 FR
42666, Aug. 8, 1997; 62 FR 65203, Dec. 11, 1997; 63 FR 13338, March 19, 1998;63 FR 17093, April 8, 1998; 64 FR 13908,
March 23, 1998; 65 FR 46818 , July 31, 2000; 70 FR 53929, Sept. 13, 2005; 71 FR 38086, July 5, 2006; 72 FR 7190, Feb.
14, 2007; 72 FR 40075, July 23, 2007; 72 FR 71068, Dec. 14, 2007; 73 FR 75583, Dec. 12, 2008; 74 FR 40447, August 11,
2009; 74 FR 46355, Sept. 9, 2009; 75 FR 12685, March 17, 2010; 76 FR 10515, Feb. 25, 2011; 76 FR 33606, June 8, 2011;
76 FR 75786, Dec. 5, 2011; 77 FR 17764, March 26, 2012; 77 FR 37598, June 22, 2012]
1910.217 App B - Nonmandatory guidelines for certification/validation of safety systems for presence sensing device
initiation of mechanical power presses
1910.217 App C - Mandatory requirements for OSHA recognition of third-party validation organizations for the PSDI
standard
1910.217 App D - Nonmandatory supplementary information
1910.218 - Forging machines.
1910.219 - Mechanical power-transmission apparatus.
1910 Subpart P - Hand and Portable Powered Tools and Other Hand-Held Equipment
1910.241 - Definitions.
1910.242 - Hand and portable powered tools and equipment, general.
1910.243 - Guarding of portable powered tools.
1910.244 - Other portable tools and equipment.
1910 Subpart Q - Welding, Cutting, and Brazing
1910.251 - Definitions.
1910.252 - General requirements.
1910.253 - Oxygen-fuel gas welding and cutting.
1910.254 - Arc welding and cutting.
1910.255 - Resistance welding.
1910 Subpart R - Special Industries
1910.261 - Pulp, paper, and paperboard mills.
1910.262 - Textiles.
1910.263 - Bakery equipment.
1910.264 - Laundry machinery and operations.
1910.265 - Sawmills.
1910.266 - Logging operations.
1910.266 App A - First-aid Kits (Mandatory).
1910.266 App B - First-aid and CPR Training (Mandatory).
1910.266 App C - Comparable ISO Standards (Non-mandatory)
1910.268 - Telecommunications.
1910.269 - Electric Power Generation, Transmission, and Distribution.
1910.269 App A - Flow Charts.
1910.269 App B - Working on Exposed Energized Parts.
1910.269 App C - Protection from Step and Touch Potentials.
1910.269 App D - Methods of Inspecting and Testing Wood Poles.
1910.269 App E - Reference Documents.
1910.272 - Grain handling facilities.
1910.272 App A - Grain handling facilities
1910.272 App B - National consensus standards
1910.272 App C - References for further information
1910 Subpart S - Electrical
1910.301 - Introduction.
1910.302 - Electric utilization systems.
1910.303 - General.
1910.304 - Wiring design and protection.
1910.305 - Wiring methods, components, and equipment for general use.
1910.306 - Specific purpose equipment and installations.
1910.307 - Hazardous (classified) locations.
1910.308 - Special systems.
1910.309 - [Reserved]
1910.310 - [Reserved]
1910.311 - [Reserved]
1910.312 - [Reserved]
1910.313 - [Reserved]
1910.314 - [Reserved]
1910.315 - [Reserved]
1910.316 - [Reserved]
1910.317 - [Reserved]
1910.318 - [Reserved]
1910.319 - [Reserved]
1910.320 - [Reserved]
1910.321 - [Reserved]
1910.322 - [Reserved]
1910.323 - [Reserved]
1910.324 - [Reserved]
1910.325 - [Reserved]
1910.326 - [Reserved]
1910.327 - [Reserved]
1910.328 - [Reserved]
1910.329 - [Reserved]
1910.330 - [Reserved]
1910.331 - Scope
1910.332 - Training
1910.333 - Selection and use of work practices
1910.334 - Use of equipment.
1910.335 - Safeguards for personnel protection.
1910.336 - [Reserved]
1910.337 - [Reserved]
1910.338 - [Reserved]
1910.339 - [Reserved]
1910.340 - [Reserved]
1910.341 - [Reserved]
1910.342 - [Reserved]
1910.343 - [Reserved]
1910.344 - [Reserved]
1910.345 - [Reserved]
1910.346 - [Reserved]
1910.347 - [Reserved]
1910.348 - [Reserved]
1910.349 - [Reserved]
1910.350 - [Reserved]
1910.351 - [Reserved]
1910.352 - [Reserved]
1910.353 - [Reserved]
1910.354 - [Reserved]
1910.355 - [Reserved]
1910.356 - [Reserved]
1910.357 - [Reserved]
1910.358 - [Reserved]
1910.359 - [Reserved]
1910.360 - [Reserved]
1910.361 - [Reserved]
1910.362 - [Reserved]
1910.363 - [Reserved]
1910.364 - [Reserved]
1910.365 - [Reserved]
1910.366 - [Reserved]
1910.367 - [Reserved]
1910.368 - [Reserved]
1910.369 - [Reserved]
1910.370 - [Reserved]
1910.371 - [Reserved]
1910.372 - [Reserved]
1910.373 - [Reserved]
1910.374 - [Reserved]
1910.375 - [Reserved]
1910.376 - [Reserved]
1910.377 - [Reserved]
1910.378 - [Reserved]
1910.379 - [Reserved]
1910.380 - [Reserved]
1910.381 - [Reserved]
1910.382 - [Reserved]
1910.383 - [Reserved]
1910.384 - [Reserved]
1910.385 - [Reserved]
1910.386 - [Reserved]
1910.387 - [Reserved]
1910.388 - [Reserved]
1910.389 - [Reserved]
1910.390 - [Reserved]
1910.391 - [Reserved]
1910.392 - [Reserved]
1910.393 - [Reserved]
1910.394 - [Reserved]
1910.395 - [Reserved]
1910.396 - [Reserved]
1910.397 - [Reserved]
1910.398 - [Reserved]
1910.399 - Definitions applicable to this subpart.
1910 Subpart S App A - Reference Documents
1910 Subpart T - Commercial Diving Operations
1910.401 - Scope and application.
1910.402 - Definitions.
1910.410 - Qualifications of dive team.
1910.420 - Safe practices manual.
1910.421 - Pre-dive procedures.
1910.422 - Procedures during dive.
1910.423 - Post-dive procedures.
1910.424 - SCUBA diving.
1910.425 - Surface-supplied air diving.
1910.426 - Mixed-gas diving.
1910.427 - Liveboating.
1910.430 - Equipment.
1910.440 - Recordkeeping requirements.
1910 Subpart T App A - Examples of conditions which may restrict or limit exposure to hyperbaric conditions
1910 Subpart T App B - Guidelines for scientific diving
1910 Subpart T App C - Alternative Conditions Under 1910.401(a)(3) for Recreational Diving Instructors and Diving
Guides (Mandatory)
1910 Subpart U - [Reserved]
1910 Subpart V - [Reserved]
1910 Subpart W - Program Standard
1910 Subpart X - [Reserved]
1910.1027 App D - Occupational Health History Interview With Reference to Cadmium Exposure
1910.1027 App E - Cadmium in Workplace Atmospheres
1910.1027 App F - Nonmandatory Protocol for Biological Monitoring
1910.1028 - Benzene.
1910.1028 App A - Substance safety data sheet, Benzene
1910.1028 App B - Substance technical guidelines, Benzene
1910.1028 App C - Medical surveillance guidelines for Benzene
1910.1028 App D - Sampling and analytical methods for Benzene monitoring and measurement procedures
1910.1028 App E - Qualitative and Quantitative fit testing procedures
1910.1029 - Coke oven emissions.
1910.1029 App A - Coke oven emissions substance information sheet
1910.1029 App B - Industrial hygiene and medical surveillance guidelines
1910.1030 - Bloodborne pathogens.
1910.1030 App A - Hepatitis B Vaccine Declination (Mandatory)
1910.1043 - Cotton dust.
1910.1043 App A - Air sampling and analytical procedures for determining concentrations of cotton dust
1910.1043 App B-I - Respiratory questionnaire
1910.1043 App B-II - Respiratory questionnaire for non-textile workers for the cotton industry
1910.1043 App B-III - Abbreviated respiratory questionnaire
1910.1043 App C - Spirometry prediction tables for normal males and females
1910.1043 App D - Pulmonary function standards for cotton dust standard
1910.1043 App E - Vertical elutriator equivalency protocol
1910.1044 - 1,2-dibromo-3-chloropropane.
1910.1044 App A - Substance safety data sheet for DBCP
1910.1044 App B - Substance technical guidelines for DBCP
1910.1044 App C - Medical surveillance guidelines for DBCP
1910.1045 - Acrylonitrile.
1910.1045 App A - Substance safety data sheet for acrylonitrile
1910.1045 App B - Substance technical guidelines for acrylonitrile
1910.1045 App C - Medical surveillance guidelines for acrylonitrile
1910.1045 App D - Sampling and analytical methods for acrylonitrile
1910.1047 - Ethylene oxide.
1910.1047 App A - Substance safety data sheet for ethylene oxide (non-mandatory)
1910.1047 App B - Substance technical guidelines for ethylene oxide (Non-mandatory)
1910.1047 App C - Medical surveillance guidelines for ethylene oxide (Non-mandatory)
1910.1047 App D - Sampling and analytical methods for ethylene oxide (Non-mandatory)
1910.1048 - Formaldehyde.
1910.1048 App A - Substance technical guidelines for formalin
1910.1048 App B - Sampling strategy and analytical methods for formaldehyde
1910.1048 App C - Medical surveillance - Formaldehyde
1910.1048 App D - Nonmandatory medical disease questionnaire
1910.1048 App E - Qualitative and quantitative fit testing procedures
1910.1050 - Methylenedianiline
1910.1050 App A - Substance Data Sheet, for 4,4'-Methylenedianiline
1910.1050 App B - Substance Technical Guidelines, MDA
1910.1050 App C - Medical Surveillance Guidelines for MDA
1910.1050 App D - Sampling and Analytical Methods for MDA Monitoring and Measurement Procedures
1910.1050 App E - Qualitative and Quantitive Fit Testing Procedures
1910.1051 - 1,3-Butadiene.
1910.1051 App A - Substance Safety Data Sheet For 1,3-Butadiene (Non-Mandatory)
1910.1051 App B - Substance Technical Guidelines for 1,3-Butadiene (Non-Mandatory)
1910.1051 App C - Medical Screening and Surveillance for 1,3-Butadiene (Non-Mandatory)
1910.1051 App D - Sampling and Analytical Method for 1,3-Butadiene (Non-Mandatory)
1910.1051 App E - Respirator Fit Testing Procedures (Mandatory)