VELOSI INTERNATIONAL
‘VELOSI
KOREA
We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBB001
Ref. Test Report No.: FSTR-13E01-01.
‘This is to certify that the following materials have been inspected on random basis by Vobsi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
‘Manufacturer : H¥-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea,
Location of Test: 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1, Description of Test Valve :
Valve Model No. VDBAgIG-MV
Valve Drawing No. VDBAGIG-MV-4130
‘Type of Test Valve Double Block & Bleed Valve
Valve Design APLG6A (180 10423), EMUA 182
Valve Size (NPS) $0 1/2" RT]
Pressure Rating 10000psi API 6A
Valve Body Material Aisi4130
Valve Seat Material : METAL
Date of Test May 01,2013
2. Qualified Range of Valve :
Qualified Sizes (NPS) aye
Qualified Pressure Ratings 10000psi,15000psi,20000psi
Qualified Valve Material Ferric
This certificate is issued in accordance with API GFA, 3d edition, based on result of test report on above mentioned test valve,
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate,
The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements.
SI
i)
Nelost International - Korea
Date: 17th of May 2013,
Hee-Hyun, Kim
President
Hake KsVELOSI INTERNATIONAL
KOREA
AY
VELOSI Weare You
Tie WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBB002
Ref. Test Report No.: FSTR-13E01-02
‘This Is to certify that the folk
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
18 materials have been inspected on random basis by Vebsi Korea and found to be
Manufacturer : H¥-LOK CORPORATION
Location : 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. voRAZ)G-MV
Valve Drawing No. VDBAI2IG-MV-P53
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘APLG6A (ISO 10423), EEMUA 182
Valve Size (NPS) $P0 3/4" RT)
Pressure Rating 10000psi API 6A
Valve Body Material __ 182 F53
Valve Seat Material E METAL
_ Date of Test May 01, 2013 :
2. Qualified Range of Valve: sae
Qualified Sizes (NPS) eae eeeeaya
Qualified Pressure Ratings 10000psi,15000psi, 20000psi
é Qualified Valve Material Duplex
‘This certificate is issued in accordance with API GPA, 3rd edition, based on result of test report on above mentioned test valve.
For detail
report of tested valve, see the Appendix I Fire Test Repor of this certificate.
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements.
Velosi Intemational - Korea
Date : 17th of May 2013
Hake. Hs
Hee-Hyun, Kim
PresidentVELOSI INTERNATIONAL
KOREA
VELOSI
vist
We Are You
THe WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS:
FIRE TEST CERTIFICATE
Certification No. : FTC-GFA-HYLOK-20130517-DBB003
Ref. Test Report No.: FSTR-13E01-03
‘This is to certify that the following materials have been inspected on random basis by Velosi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
Manufacturer
Location
Location of Test
1. Description of Test Valve:
HY-LOK CORPORATION
467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Valve Model No, vbEG29j6-My
Valve Drawing No. \VDBG29)6-MV-4130
‘Type of Test Valve | Double Block & Bleed Valve
Valve Design ‘APIA (ISO 10423), EEMUA 182
Valve Size (Nominal)
APL 1-13/16" RT)
Pressure Rating
10000psi API 6A
2. Qualified Range of Valve:
Valve Body Material Asia130
Valve Seat Material ‘ METAL
Date of Test May 01, 2018
Qualified Sizes (Nominal)
Qualified Pressure Ratings
1-13/16"2-1/16"2-9/16",
a1/eraisie” |
10000psi, 15000psi, 20000psi
Qualified Valve Material
Rerritic
‘This certificate is issued in accordance with API
\, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate,
‘The additional vaive qualification shall be limited on the valves according to Table 2 & 3 requirements.
Velosi Intemational - Korea
Date : 17th of May 2013
Hee-Hyun, Kim
President
ake BsVELOSIINTERNATIONAL ayy
KOREA C2?
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBBO04
Ref. Test Report Nos FSTR-13E01-04
‘This is to certify that the following materia have been inspected on random basis by Vebsi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
Manufacturer HY-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. \VDBG29/6-MV
Valve Drawing No. \VDBG29)G-MV-F53
‘Type of Test Valve Double Block & Bleed Valve
Valve Design API.6A (ISO 10423), BEMUA 182
Valve Size (Nominal) APL1-13/16" RT]
Pressure Rating 10000psi API 6A
Valve Body Material A182 F53
Valve Seat Material METAL
Date of Test | ____ May 01, 2013
2. Qualified Range of Valve:
Qualified Sizes (Nominal) 1-13/16",2-1/16'2-9/16" 3-1/8" 4-1/16"
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material Duplex
‘This certificate is issued in accordance with API 6FA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate.
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements,
Kaye. Bs
Velosi Intemational - Korea Hee-Hyun, Kim
Date: 17th of May 2013 PresidentKOREA
VELOSI INTERNATIONAL way
VELOSI
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBB00S,
Ref. Test Report No: FSTR-13E02-01
‘This is to certify that the folowing materials have been inspected on random basis by Velbsi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
Manufacturer HY-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test: 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No voRG29}6-MV
Valve Drawing No, voRG25)6-Mv-F60
Type of Test Valve Double Block & Bleed Valve
Valve Design ‘APL 6A (ISO 10423), EEMUA 192
Valve Size (Nominal) API 1-13/16" RT]
Pressure Rating 10000psi API 6A
Valve Body Material A694 F60
Valve Seat Material | METAL ‘|
Date of Test May 02, 2013 z
2. Qualified Range of Valve :
“Qualified Sizes (Nominal) 1-13/16"2-1/16",2-9/1673-1/8"4-1/16"
Qualified Pressure Ratings 410000pst, 150005, 20000psi
Qualified Valve Material Carbon & Alloy Steel
This certificate is issued in accordance with API 6FA, 3rd edition, based on result of test report on above mentioned test valve,
For detailed report of tested valve, see the Appendix I Fire Test Report ofthis certificate
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements
Velosi Imemational - Korea Hee-Hyun, Kim
Date : 17th of May 2013 PresidentKOREA
VELOSI INTERNATIONAL way
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS:
FIRE TEST CERTIFICATE
Certification No. : FTC-GFA-HYLOK-20130517-DBB006
Ref. Test Report No.: FSTR-13E02-02
‘This is to certify that the follwing materials have been inspected on random basis by Vebsi Korea and found to be
satisfactory in the Fire Test in accordance with API GFA third edition, ERRATA 2, December 2008.
Manufacturer HY-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test: 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Mode! No \DBG29}6-MV
Valve Drawing No, vonG29}G-mv.1625
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘API 6A (ISO 10423), BEMUA 162
Valve Size (Nominal) APL1-13/16" RT]
Pressure Rating 10000psi API 6A
Valve Body Material 1B564 UNS NO6625 :
Valve Seat Material METAL
z _Date of Test May 02,2013
2. Qualified Range of Valve: 7
He Qualified Sizes (Nominal) 1-13/16"2-1/16" 2-9/16"3-1/8"4-1/16"
"Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material ___ Nickel Alloy
‘This certificate is issued in accordance with API GFA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate.
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements.
‘osi International - Korea Hee-Hyun, Kim
Date : 17th of May 2013 PresidentKOREA
VELOSI INTERNATIONAL way
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-GFA-HYLOK-20130517-DBBO07
Ref. Test Report No.: FSTR-13E02-03
This Is to certify that the following materia have been inspected on random basis by Velosi Korea and found to be
satisfactory in the Fire Test in accordance with API 6PA, third edition, ERRATA 2, December 2008.
Manufacturer 'Y-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Mode! No. VDBG29)6-KV
Valve DrawingNo. ‘VDBG29]6-KV-4130
‘Type of Test Valve Double Block & Bleed Valve
Valve Design API 6A (ISO 10423), BEMUA 182
Valve Size (Nominal) APL 1-13/16" RT
Pressure Rating 10000psi API 6A
Valve Body Material AIsI4130
Valve Seat Material PEEK
Date of Test May 02, 2013
2. Qualified Range of Valve:
Qualified sizes (Nominal) 1-13/16",2-1/16"2-9/16" 3-1/8" 4-1/16"
Qualified Pressure Ratings 10000psi, 15000psi, 20000pst
Qualified Valve Material Ferritic
This certificate is issued in accordance with API 6FA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certficate
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements,
Velosi Intemational - Korea Hee-Hyun, Kim
Date : 17th of May 2013, PresidentKOREA
VELOSI INTERNATIONAL way
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBBO08,
Ref. Test Report No. FSTR-13E02-04
This is to certify that the following materials have been inspected on random basis by Vebsi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008,
Manufacturer 1Y-LOK CORPORATION
Location 467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test _: 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve:
Valve Model No. [ vonezajo-Kv
Valve Drawing No. \VDBG29)6-KV-51
‘Type of Test Valve Double Block & Bleed Valve
Valve Design {APL 6A (ISO 10423), EEMUA 182
Valve Size (Nominal APL1-15/16" RT)
Pressure Rating 20000psi API 6A
Valve Body Material | A182 F51
Valve Seat Material PEEK
Date of Test May 02,2013 ah
2. Qualified Range of Valve Secreta
[ Qualified sizes (Nominal) 1-13/16"2-1/16"2-9/16" 3-1/8" A-1/16"
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material Duplex
‘This certificate is issued in accordance with API GPA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate.
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements.
Nelosi International - Korea Hee-Hyun, Kim
Date: 17th of May 2013 President‘VELOSI
VELOSI INTERNATIONAL WH y
WS
KOREA
We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-GFA-HYLOK-20130517-DBB009
Ref. Test Report No.: FSTR-13E03-01
‘This is to certify that the following materials have been inspected on random basis by Velosi Korea and found to be
satisfactory in the Fire Test in accordance with API 6FA, third edition, ERRATA 2, December 2008.
Manufacturer : HY-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test _: 1467-1, Songjeong-dong. Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. VDBG29)6-KV
Valve Drawing No. VDBG29]G-KV-F60
‘Type of Test Valve Double Block & Bleed Valve
Valve Design API 6A (ISO 10423), EEMUA 182
Valve Size (Nominal) APL 1-13/16" RT)
Pressure Rating 10000psi API 6A
Valve Body Material A694 F60
Valve Seat Material PEEK
Date ofTest May 03, 2013
2. Qualified Range of Valve: eae
Qualified Sizes (Nominal) 41-13/16"2-1/16",2-9/16" 3-1/8" 4-1/16"
Qualified Pressure Ratings +10000psi, 15000psi, 20000psi
Qualified Valve Material Carbon & Alloy Steet
ficate is issued in accordance with API 6FA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix | Fire Test Report of this certificate
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements.
Date : 17th of May 2013,
Hee-Hyun, Ki
PresidentVELOSI INTERNATIONAL
KOREA
vik
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-6FA-HYLOK-20130517-DBBO10
Ref. Test Report No.: FSTR-13E03-02
‘This is to certify that the follwing materials have been inspected on random basis by Vebsi Korea and found to be
satisfactory in the Fire Test in accordance with API 6PA, third edition, ERRATA 2, December 2008.
HY-LOK CORPORATION
1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Manufacturer
Location
Location of Test
1. Description of Test Valve :
Valve Model No. ‘vDRG29/6-KV
Valve Drawing No. VDBG25}6-KV-1625
Type of Test Valve | Double Block & Bleed Valve
Valve Design ‘API GA (ISO 10423), EEMUA 182
Valve Size (Nominal)
APL 1-13/16" RT)
Pressure Rating
10000psi API 6A
2. Qualified Range of Valve :
Valve Body Material ___B564 UNS No6625,
Valve Seat Material PEEK
Date of Test May 03, 2013
Qualified Sizes (Nominal)
Qualified Pressure Ratings
10000psi, 15000psi, 20000psi
Qualified Valve Material
Nickel Alloy
‘This certificate is issued in accordance with API 6FA, 3rd edition, based on result of test report on above mentioned test valve.
For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate,
‘The additional valve qualification shall be limited on the valves according to Table 2 & 3 requirements
SI A
Yelosi Intern
Date : 17th of May 2013
Rahn Bs
Hee-Hyun, Kim
President
1-13/16"2-1/16',2-9/16" 3-1/8" 4-1/16"KOREA
NELOSE We Are You
VELOSI INTERNATIONAL way
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-1S0-HYLOK-20130517-DBB001
Ref. Test Report No. FSTR-13E03-03
‘This is to certify that the below materials have beon inspected by Velosi Korea and found to be satisfactory in the Fire Test
in accordance with EN ISO 10497 : 2010(8).
Manufacturer HY-LOK CORPORATION
Location + 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. | VDBG3316-MV
Valve Drawing No, VDBG33)G-MV-4130
‘Type of Test Valve Double Block & Bleed Valve
Valve Design API 6A (ISO 10423), EEMUA 182
Valve Size (Nominal) API2-1/16" RT)
Pressure Rating 10000psi API 6A i
Valve Body Material AISI4130
Valve Seat Material METAL,
Date of Test ae __ May 03,2013
2.Qualified Range ofValve:
Qualified Sizes (Nominal) 2-1/16" and below; 2-9/16%; 3-1/8"; 41/16"
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material Ferric
‘This certificate is issued in accordance with EN ISO 10497 : 2010(E), based on the result of test report on above mentioned
test valve. For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate.
"The additional valve qualification shall be limited on the valves according to para.7 requirements
Velosi Intemational Hee-Hyun, Kim
Date : 17th of May 2013 PresidentVELOSIINTERNATIONAL 47,7)
KOREA C7
fatoer We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No, : FTC-1S0-HYLOK-20130517-DBB002
Ref. Test Report No.: FSTR-13E03-04
‘This sto certify that the below materials have bean inspected by Vebsi Korea and found to be satisfactory in the Fire Test
inaccordance with EN 1S0 10497 : 2010(E).
Manufacturer HY-LOK CORPORATION
Location 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No, VDBG33)G-MV
Valve Drawing No. VDBG33}G-MV-F51
‘Type of Test Valve Double Block & Bleed Valve
Valve Design API 6A (ISO 10423), EEMUA 182
Valve Size (Nominal) APL2-1/16" RT]
Pressure Rating 10000psi API 6A
Valve Body Material A182 FS
Valve Seat Material METAL
Date of Test May 03,2013,
2. Qualified Range of Valve :
Qualified Sizes (Nominal) 2-1/16" and below; 2-9/16"; 3-1/8";
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material Duplex
‘This certificate is issued in accordance with EN ISO 10497 : 2010(B), based on the result of test report on above mentioned
test valve. For detailed report of tested valve, see the Appendix 1 Fire Test Report of this certificate
‘The additional valve qualification shall be limited on the valves according to para.7 requirements.
Velosi International - Korea Hee-Hyun, Kim
Date : 17th of May 2013 PresidentKOREA
VELOSI Ww
le
VELOSI INTERNATIONAL way
‘Are You
Tue WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-ISO-HYLOK-20130517-DBB003
Ref. Test Report No.: FSTR-13E06-01
‘This isto certity that the below materials have been inspected by Vebsi Korea and found to be satisfactory in the Fire Test
inaccordance with EN ISO 10497 : 2010(E).
Manufacturer : H¥:LOK CORPORATION
Location : Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test , Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No.
VDBG33}G-MV
Valve Drawing No. VDBG33}6-MV-F60
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘APL 6A (180 10423), EEMUA 182
Valve Size (Nominal) API2-1/16" RT] |
Pressure Rating 10000psi API 6A
Valve Body Material A694 P60
Valve Seat Material METAL FE
Date of Test May 06,2013
2. Qualified Range of Valve:
Qualified Sizes (Nominal) 2-1/16" and below; 2-9/16"; 3-1/8"; 4-1/16"
Qualified Pressure Ratings 10000, 15000psi,20000psi
Qualified Valve Material Carbon & Alloy Stee!
0(E), based on the result of test report on above mentioned
9f tested valve, see the Appendix 1 Fire Test Report of this cenificate
‘The additional valve qualification shall be limited on the valves according to para.7 requirements,
Hake. Hs
Hee-Hyun, Kim
Date : 17th of May 2013 PresidentVELOSI INTERNATIONAL
KOREA
We Are You
RLDW IDE INSPECTION, EXPEDITING AND. PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-1S0-HYLOK-20130517-DBB004
Ref. Test Report No.: FSTR-13E06-02
‘Thisiis to certity that the below materials have been inspected by Vebsi Korea and found to be satisfactory in the Pire Test
in accordance with EN ISO 10497 : 2010(€).
Manufacturer
Location
Location of Test
HY-LOK CORPORATION
1467-1, So
1. Description of Test Valve :
-ong-dong, Gangseo-gu, Busan, Korea
1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Valve Model No, \voBG33]6-MV
Valve Drawing No. VDBG33]6-MV-S316
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ADI 6A (ISO 10423), EEMUA 162
Valve Size (Nominal)
APL 2-1/16" RT]
Pressure Rating
10000psi API 6A
Valve Body Material A182 F316
Valve Seat Material I METAL
Date of Test May 06,2013,
2. Qualified Range of Valve:
Qualified Sizes (Nominal)
21/16" and below; 2-9/16"; 3-1/8"; 4-1/16"
Qualified Pressure Ratings
__10000psi, 15000psi, 20000psi
Qualified Valve Material
Austenitic & Nickel Alloy
‘This certificate is issued in accordance with EN ISO 10497 : 2010(E), based on the result of test report on above mentioned
test valve
For detailed report of tested valve, se the Appendix 1 Fire Test Report of this certificate.
The additional valve qualification shal be limited on the valves according to para.7 requirements,
Date : 17th of May 2013,
Hee-Hyun, Kim
PresidentKOREA
VELOSI INTERNATIONAL way
VELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-IS0-HYLOK-20130517-DBB00S
Ref. Test Report No.: FSTR-13E06-03,
‘This isto certify that the bebw materials have been inspected by Vebsi Korea and found to be satisfactory in the Fire Test
in accordance with EN ISO 10497 : 2010(E).
Manufacturer HY-LOK CORPORATION
Location 1467-1, Songjeong:dong, Gangseo-gu, Busan, Korea
Location of Test: 1467-1, Songjeong-dong,Gangseo-gu, Busan, Korea
1. Description of Test Valve:
Valve Model No. ‘vDB633)6-KV
Valve Drawing No. VDBG33]6-KV-4130
Type of Test Valve Double Block & Bleed Valve
Valve Design ‘APL 6A (1S0 10423), EEMUA 182
Valve Size (Nominal) ‘APL2-4/16" RT
Pressure Rating i 10000psi API 6A
Valve Body Material Se ee AISI4130
Valve Seat Material | PEEK -
Date of Test May 06, 2013,
2. Qualified Range of Valve: ct
Qualified Sizes (Nominal) 2-1/16" and below; 2-9/16"; 3-1/8"; 4-1/16"
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
Qualified Valve Material Ferritic
‘This certificate is issued in accordance with EN ISO 10497 : 2010(B), based on the result of test report on above mentioned
test valve. For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate.
‘The additional valve qualification shall be limited on the valves according to para.7 requirements,
Velosi International -K. Hee-Hyun, Kim
Date : 17th of May 2013 ProsidentVELOSI We Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-1SO-HYLOK-20130517-DBB006
Ref. Test Report No.: FSTR-13E06-04
‘Thisis to certify that the bebw materials have been inspected by Velosi Korea and found to be satisfactory in the Fire Test
in accordance with EN ISO 10497 : 2010(€).
Manufacturer
Location
Location of Test
HY-LOK CORPORATION
Songjeong-dong, Gangseo-gu, Busan, Korea
‘Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No VbBG33]6-KV
Valve Drawing No \VDBG33)6-KV-F51
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘APL 6A (180 10423), EEMUA 182
Valve Size (Nominal APL2-1/16" RT}
Pressure Rating 10000psi API 6A
Valve Body Material 102651
Valve Seat Material PEEK
Date of Test May 06,2013 e
Qualified Sizes (Nominal) __—_—_—|_—2-1/16" and below; 2-9/16",3-1/6",4-1/16" |
Qualified Pressure Ratings 10000psi, 15000psi, 20000psi
(Qualified Valve Material Duplex
‘This certificate is issued in accordance with EN ISO 10497 : 2010(B), based on the result of test report on above mentioned
test valve. For detailed report of tested valve, see the Appendix I Fire Test Report of this certificate
‘The additional valve qualification shall be limited on the valves according to pars. requirements
Si
Si 0)
Malla 2s
‘Velosi International - Korea Hee-Hyun, Kim
Date : 17th of May 2013 PresidentKOREA
VELOSI INTERNATIONAL way
‘VELOSI Wo Are You
THE WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS.
FIRE TEST CERTIFICATE
Certification No. : FTC-1S0-HYLOK-20130517-DBB007
Ref. Test Report No: FSTR-13E07-01
‘This isto certify that the below materials have been inspected by Velosi Korea and found to be satisfactory in the Fire Test
In accordance with EN ISO 10497 : 2010(E).
‘Manufacturer HY-LOK CORPORATION
Location -ong-dong, Gangseo-gu, Busan, Korea
Location of Test 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. ‘yDB633)6-Kv
Valve Drawing No. VDBG33IG-KV-F60
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘API 6A (IS0 10423), EEMUA 182
Valve Size (Nominal) API2-1/16" RT}
Pressure Rating He 10000psi API 6A
Valve Body Material A694 60
Valve Seat Material PEEK al
DateofTest May 07,2013
2. Qualified Range of Valve: é
(Qualified Sizes (Nominal) 2-1/16" and below; 29/16": 3-1/8"; 4-1/16"
Qualified Pressure Ratings 10000psi, 15000pst,20000pst
(Qualified Valve Material Carbon & Alloy Steet
‘This certificate is issued in accordance with EN ISO 10497 : 2010(E), based on the result of test report on above mentioned
test valve. For detailed repor of tested valve see the Appendix I Fire Test Report of this certficat.
‘The additional valve qualification shall be limited onthe valves according to para.7 requirements
Velosi international - Korea Hee-Hyun, Kim
Date : 17th of May 2013 PresidentVELOSI
VELOSI INTERNATIONAL
wat
We Are You
Tue WORLDWIDE INSPECTION, EXPEDITING AND PROCUREMENT SPECIALISTS
FIRE TEST CERTIFICATE
Certification No. : FTC-ISO-HYLOK-20130517-DBB008
Ref. Test Report No.: FSTR-13E07-02
‘This isto certify that the below materials have been inspected by Velosi Korea and found to be satisfactory in the Fire Test
inaccordance with EN 1S0 10497 : 2010(€).
Manufacturer HY-LOK CORPORATION
Location :1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
Location of Test: 1467-1, Songjeong-dong, Gangseo-gu, Busan, Korea
1. Description of Test Valve :
Valve Model No. VDBG33{6-KV
Valve Drawing No. VDBG33}G-KV-S316
‘Type of Test Valve Double Block & Bleed Valve
Valve Design ‘API 6A (ISO 10423), EEMUA 182
Valve Size (Nominal) API2-1/16" RT]
Pressure Rating 10000psi API 6A
Valve Body Material A182 F316
Valve Seat Material PEEK
Date of Test. May 07,2013
2. Qualified Range of Valve:
Qualified Sizes (Nominal)
2-1/16" and below; 2-9/16%; 3-4/8"; 4-1/16"
Qualified Pressure Ratings
110000psi, 15000psi, 20000ps
l Qualified Valve Material
Austenitic & Nickel Alloy
This certificate is issued in accordance with EN ISO 10497 : 2010(B), based on the result of test report on above mentioned
test valve, For detiled report of tested valve, see the Appendix I Fire Test Report ofthis cerificete.
The additional vaive qualification shall be limited on the valves according to para requirements.
SI
ss)
‘elosi Intemational - Korea
Date : 17th of May 2013
Lake Bs