Professional Documents
Culture Documents
PLC Based Automatic Cooking
PLC Based Automatic Cooking
Block diagram
Oil
Vessel 0
Water +Salt
Vessel 1
Vegetables
Vessel 2
Mix spices
Vessel 3
Common Vessel
Keep a manual
strirrer/or motor
based stirrer if
needed
Temperature
control of
electrical hot
plate can be set
at first
Hot Plate
Rice
Vessel 4
Components
Vessels
Solenoid valves/ motor door for
vegetables/rice
Automatic switch on/off for hot plate
operation
Level sensors if required for
water/oil/rice/vegetables if required (two are
sufficient for water and oil
Process
Calculate the amount required for each ingredient to
be put inside the common vessel
Make a step wise logic for opening of solenoid valve /
motor operated door for adding the ingredients
For eg: first oil second spices third vegetables then rice
then water and salt.
Turn on the hot plate before and then reduce the
temperature after a certain time( you can use a boiled
water by controlling it with temperature control if
possible and then operate it through solenoid valve :
addition to the Project)