Professional Documents
Culture Documents
Quick Info
MELTSHOP DESIGN
From Water Cooled Panels to complete Electric Arc Furnaces, from Ladles to complete
Ladle Furnaces, from Tundishes to complete Continuous Casting Machines, from Ducts
to complete Fume Treatment Systems and from Engineering Services to Turn-Key
Plants, CVS offers economically viable solutions at European standards.
From Bar mill to Section Mill, From Chimney to complete Reheating Furnaces, from
Roll Stands and water quenching system to complete Rolling Mill Train, from
Cooling Bed Area to Handling Area, from Flying Shears to Cold Shears, Full
Automation System and from Engineering Services to Turn-Key Plants, CVS offers
economically viable solutions at European standards.
CVS Material Handling System considers reduce manual work and to avoid time-demanding
material handling and automatic operation.
The plant is generally designed for the storage into bins, extraction, weighing, transport and
charging of ferroalloy, additives and fluxes into scrap bucket, into the ladle in tapping position and to
the ladle refining station.
All plant fuctions, specifically from storage bins up to loading to the final users, are controlled
automatically.
The dosage is carried out with high accuracy to obtain maximum technical results and, at the same
time, to use additives and fluxes in the best possible way to minimize expenses.
Maximum and minimum level gauges in storage bins will warn operators.
CVS - MHS
Belt Conveyors -1
•Drive pulley installed on bearings supports and droved by the driving station. It is properly
covered by rhomb groove shaped clutching rubber to avoid sliding between the drive pulley
and the belt during transport.
CVS - MHS
Belt Conveyors - 2
CVS - MHS
Bucket (Elevator) Belt Conveyors
The bucket belt conveyor consists of a group of a
mechanical parts and structures comprehending the
following:
CVS - MHS
Electromechanical Vibrating Extractors
The electromechanical vibrating extractors is composed of two main parts:
The fixed part and the vibrating one are connected together by an elastic junctions (tie ropes)
which permit the vibration of the channel. The vibration is caused by the simultaneous action of
the couple of unbalanced drives.
CVS - MHS
Pneumatic Deviator
The pneumatic DEVIATOR is a distributor with two working positions to convey the material towards
other two users in an alternative mode. The deviation is made by an internal rotating chute
commanded by a pneumatic cylinder.
CVS - MHS
Pneumatic Shell Valve
CVS - MHS
Weighing Hopper
Slag control, feeding rate and power input are the key factors in continuous charging
procedures.
CVS - DRI Continuous Feeding System
• A maximum briquette
dimension that is less than 50%
of the minimum hopper opening,
CVS - MHS
AUTOMATION
Supervision system
runs under WINDOWS
XP.
The graphic
environment is
composed from a
series of pages
managed by the
consumer through the
principal
menu (visible on the
tall part of the video).
CVS - MHS
AUTOMATION
• Execution of manual
movements.
• Complete management
of automatic weighings
and choice of destinations.
CVS - MHS
AUTOMATION
• Record of daily consumptions ( 30 days ), historical castings ( max 40 ),
stored weights.
CVS -
QUALITY MANAGEMENT
PHILOSOPHY
CVS -
GENERAL POLICY