Professional Documents
Culture Documents
Power(W)
Rated Rotatoin Speed (RPM): 480 2100
Shaft Material: High standard Stainless Steel GL-PMG-1800 PMG Input Torque Curve
60
Shaft Bearing: High standard SKF or NSK bearing
50
High standard Aluminium alloy with
Outer Frame Material:
TF/T6 heat treatment
Torque(NM)
40
(TF/T6 full heat treatment for increasing the performance of aluminium alloy as
follows. Heat 4-12 hours at 525-545 degrees Celsius, quench with hot water, 30
and precipitation heat treatment for 8-12 hours at 155-175 degrees Celsius.)
20
Fasteners (nuts and bolts): High standard Stainless Steel
Windings Temperature Rating: 180 degrees Celsius 10
35
M24 5
72
=3
1:4
R5 60
79
95
(44)
B B
30
8
16
219.5
64
238
97
11 5- 11 EQS
265 0 Mounting Hole
10-0.036
30-0.2
0
B-B