Negative battery cable should be disconnected. Drain the coolant and Close the radiator drain cock. Lower the vehicle. Remove the drive belt. 9. Remove the generator. 10. Remove the heater hoses.
Negative battery cable should be disconnected. Drain the coolant and Close the radiator drain cock. Lower the vehicle. Remove the drive belt. 9. Remove the generator. 10. Remove the heater hoses.
Negative battery cable should be disconnected. Drain the coolant and Close the radiator drain cock. Lower the vehicle. Remove the drive belt. 9. Remove the generator. 10. Remove the heater hoses.
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Raise the vehicle. 3. Remove the front lower splash shield. 4. Drain the coolant. 5. Close the radiator drain cock. 6. Install the front splash shield. 7. Lower the vehicle. 8. Remove the drive belt. 9. Remove the generator. 10. Remove the heater hoses.
Zoom Sized for Print
11. Remove the drive belt tensioner bolts.
12. Remove the drive belt tensioner.
Installation Procedure Zoom Sized for Print
1. Install the drive belt tensioner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolts.
Tighten the drive belt bolts to 50 Nm (37 ft. lbs.) .
3. Install the heater hoses.
4. Install the Generator. 5. Install the drive belt. 6. Refill the coolant. 7. Connect the negative battery cable.