The document reports the results of tensile tests on a glass fibre composite material specimen exposed to 45°C temperatures for varying time periods. The specimen was 250mm long, 30mm wide, and 8mm thick with a 200mm gauge length. Tests were conducted after 10, 20, 30, 40, 50, and 60 days of exposure, recording the load, elongation, stress, and strain at different load points. Overall, as exposure time increased, the load and stress required to cause elongation and strain generally decreased, indicating reduced tensile strength and stiffness over time in hot water.
The document reports the results of tensile tests on a glass fibre composite material specimen exposed to 45°C temperatures for varying time periods. The specimen was 250mm long, 30mm wide, and 8mm thick with a 200mm gauge length. Tests were conducted after 10, 20, 30, 40, 50, and 60 days of exposure, recording the load, elongation, stress, and strain at different load points. Overall, as exposure time increased, the load and stress required to cause elongation and strain generally decreased, indicating reduced tensile strength and stiffness over time in hot water.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd
The document reports the results of tensile tests on a glass fibre composite material specimen exposed to 45°C temperatures for varying time periods. The specimen was 250mm long, 30mm wide, and 8mm thick with a 200mm gauge length. Tests were conducted after 10, 20, 30, 40, 50, and 60 days of exposure, recording the load, elongation, stress, and strain at different load points. Overall, as exposure time increased, the load and stress required to cause elongation and strain generally decreased, indicating reduced tensile strength and stiffness over time in hot water.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online from Scribd