You are on page 1of 1

AC Signals

Using the function generator and oscilloscope, generate the following AC signals then complete the table:

Function
Calculation
Function Generator Generator & Oscilloscope
(T = 1/f)
Oscilloscope
No of vertical No of
Type Frequency (f) Period (T) Vpp VOLTS/DIV division for TIME/DIV horizontal Period (T)
Vpp divisions for T

Sine Wave 2 KHz 2V

Triangular
12 KHz 1.5 V
Wave

Square Wave 500 Hz 1V

Questions:

1. For each signal, does the calculated period equal the period measured by the oscilloscope.

2. After completing the above table, draw each signal displaying the x-axis and y-axis values.

You might also like