Professional Documents
Culture Documents
INA128 INA129: Features Description
INA128 INA129: Features Description
DESCRIPTION
The INA128 and INA129 are low power, general purpose instrumentation amplifiers offering excellent accuracy. The versatile 3-op amp design and small size make them ideal for a wide range of applications. Current-feedback input circuitry provides wide bandwidth even at high gain (200kHz at G = 100). A single external resistor sets any gain from 1 to 10,000. The INA128 provides an industry-standard gain equation; the INA129 gain equation is compatible with the AD620. The INA128/INA129 is laser trimmed for very low offset voltage (50V), drift (0.5V/C) and high common-mode rejection (120dB at G 100). It operates with power supplies as low as 2.25V, and quiescent current is only 700Aideal for batteryoperated systems. Internal input protection can withstand up to 40V without damage. The INA128/INA129 is available in 8-pin plastic DIP and SO-8 surface-mount packages, specified for the 40C to +85C temperature range. The INA128 is also available in a dual configuration, the INA2128.
V+ 7 INA128: INA128, INA129
Over-Voltage Protection
APPLICATIONS
BRIDGE AMPLIFIER THERMOCOUPLE AMPLIFIER RTD SENSOR AMPLIFIER MEDICAL INSTRUMENTATION DATA ACQUISITION
VIN
50k RG
49.4k RG
RG
VO
+ VIN
Over-Voltage Protection
Ref
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
www.ti.com
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
ORDERING INFORMATION
For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.
PIN CONFIGURATION
Top View RG V
1 2 3 4
8 7 6 5
RG V+ VO Ref
IN
V+IN V
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
ELECTRICAL CHARACTERISTICS
CONDITIONS
MIN
TYP
25100/G 0.25/G
VO = 0V
(V+) 2 (V) + 2
V dB dB dB dB nA pA/C nA pA/C nV/Hz nV/Hz nV/Hz VPP pA/Hz pA/Hz pAPP V/V V/V V/V % % % % ppm/C ppm/C % of FSR % of FSR % of FSR % of FSR
NOTE: Specification is same as INA128P, U or INA129P, U. (1) Input common-mode range varies with output voltage see typical curves. (2) Specified by wafer test. (3) Temperature coefficient of the 50k (or 49.4k) term in the gain equation. (4) Nonlinearity measurements in G = 1000 are dominated by noise. Typical nonlinearity is 0.001%.
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
CONDITIONS
MIN
TYP
NOTE: Specification is same as INA128P, U or INA129P, U. (1) Input common-mode range varies with output voltage see typical curves. (2) Specified by wafer test. (3) Temperature coefficient of the 50k (or 49.4k) term in the gain equation. (4) Nonlinearity measurements in G = 1000 are dominated by noise. Typical nonlinearity is 0.001%.
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
TYPICAL CHARACTERISTICS
At TA = +25C, VS = 15V, unless otherwise noted.
GAIN vs FREQUENCY 60 G = 1000V/V CommonMode Rejection (dB) 50 40 G = 100V/V Gain (dB) 30 20 10 0 10 20 1k 10k 100k Frequency (Hz) 1M 10M G = 1V/V G = 10V/V 120 100 140
COMMONMODE REJECTION vs FREQUENCY G = 1000V/V G = 100V/V G = 10V/V G = 1V/V 80 60 40 20 0 10 100 1k 10k 100k 1M Frequency (Hz)
POSITIVE POWER SUPPLY REJECTION vs FREQUENCY 140 Power Supply Rejection (dB) Power Supply Rejection (dB) 120 100 80 60 40 20 0 10 100 1k 10k 100k 1M Frequency (Hz) G = 10V/V G = 1V/V 140
G = 1000V/V G = 100V/V
G = 100V/V
G = 1V/V
100
1k
10k
100k
1M
Frequency (Hz)
INPUT COMMONMODE RANGE vs OUTPUT VOLTAGE, VS = 15V 15 CommonMode Voltage (V) 10 G=1 5 0 5 10 15 15
+
INPUT COMMONMODE RANGE vs OUTPUT VOLTAGE, VS = 5V, 2.5V G 10 CommonMode Voltage (V) 5 4 3 2 1 0 1 2 3 4 5 VS = 5V VS = 2.5V 4 3 2 1 0 1 2 3 4 5 G=1 G 10 G=1 G=1 G 10 G 10
G 10
G=1
+ +
10
10
15
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
INPUTREFERRED NOISE vs FREQUENCY Input-Referred Voltage Noise (nV/Hz) 1k 100 Input Bias Current Noise (pA/Hz) 100
G = 1V/V 10
100
0.1% 10
G = 10V/V 10 G = 100, 1000V/V Current Noise 1 1 10 100 Frequency (Hz) 1k 10k 0.1 1
QUIESCENT CURRENT and SLEW RATE vs TEMPERATURE 0.85 6 5 4 Quiescent Current (A) 0.8 5 Input Current (mA) Slew Rate (V/s) 3 2 1 0 1 2 3 4 06 75 50 25 0 25 50 Temperature (C) 75 100 1 125 5 50
G = 1000V/V G = 1V/V
G = 1V/V
+15V
G = 1000V/V
VIN
IIN 15V 10 20 30 40 50
40
30 20 10
INPUT OFFSET VOLTAGE WARMUP 10 8 Offset Voltage Change (V) Input Bias Current (nA) 6 4 2 0 2 4 6 8 10 0 100 200 300 400 Time (s) 2 500 75 1 2
50
25
25
50
75
100
125
Temperature (C)
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT (V+) (V+)0.4 Output Voltage (V) (V+)0.8 (V+)1.2 Output Voltage Swing (V) (V+) (V+)0.4 (V+)0.8 (V+)1.2 RL = 10k (V)+1.2 (V)+0.8 (V)+0.4 (V) 0 1 2 Output Current (mA) SHORTCIRCUIT OUTPUT CURRENT vs TEMPERATURE 16 ShortCircuit Current (mA) 14 12 10 8 6 4 2 0 75 50 25 0 25 50 75 100 125 Temperature (C) TOTAL HARMONIC DISTORTION + NOISE vs FREQUENCY 1 VO = 1Vrms 500kHz Measurement Bandwidth THD + N (%) 0.1 G = 100, RL = 100k G=1 RL = 10k +ISC PeaktoPeak Output Voltage (VPP) 18 ISC 3 4 0 +85C 40C
+25C
+85C
15
20
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY 30 25 20 15 10 5 0 1k 10k 100k Frequency (Hz) 1M G=1 G = 1000 G = 10, 100
0.01 G = 1, RL = 100k Dashed Portion is noise limited. 0.001 100 1k Frequency (Hz) 10k
G = 10V/V RL = 100k
100k
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
G=1
G = 100
20mV/div
20mV/div
G = 10
G = 1000
5s/div
20s/div
G=1
G = 100
5V/div
5V/div
G = 10
G = 1000
5s/div
20s/div
0.1V/div
1s/div
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
APPLICATIONS INFORMATION
Figure 1 shows the basic connections required for operation of the INA128/INA129. Applications with noisy or high impedance power supplies may require decoupling capacitors close to the device pins as shown. The output is referred to the output reference (Ref) terminal which is normally grounded. This must be a low-impedance connection to assure good common-mode rejection. A resistance of 8 in series with the Ref pin will cause a typical device to degrade to approximately 80dB CMR (G = 1).
resistors are laser trimmed to accurate absolute values. The accuracy and temperature coefficient of these internal resistors are included in the gain accuracy and drift specifications of the INA128/INA129. The stability and temperature drift of the external gain setting resistor, RG, also affects gain. RGs contribution to gain accuracy and drift can be directly inferred from the gain equation (1). Low resistor values required for high gain can make wiring resistance important. Sockets add to the wiring resistance which will contribute additional gain error (possibly an unstable gain error) in gains of approximately 100 or greater.
DYNAMIC PERFORMANCE
The typical performance curve Gain vs Frequency shows that, despite its low quiescent current, the INA128/INA129 achieves wide bandwidth, even at high gain. This is due to the current-feedback topology of the input stage circuitry. Settling time also remains excellent at high gain.
(1)
G + 1) 49.4kW RG
NOISE PERFORMANCE
The INA128/INA129 provides very low noise in most applications. Low frequency noise is approximately 0.2VPP measured from 0.1 to 10Hz (G 100). This provides dramatically improved noise when compared to state-of-the-art chopper-stabilized amplifiers.
V+ 0.1F
50kW G + 1) RG
INA128 DESIRED GAIN (V/V) 1 2 5 10 20 50 100 200 500 1000 2000 5000 10000 RG () NC 50.00k 12.50k 5.556k 2.632k 1.02k 505.1 251.3 100.2 50.05 25.01 10.00 5.001 NEAREST 1% RG () NC 49.9k 12.4k 5.62k 2.61k 1.02k 511 249 100 49.9 24.9 10 4.99
G + 1)
49.4kW RG
VIN 2
Over Voltage Protection
INA129 RG () NC 49.4k 12.35k 5489 2600 1008 499 248 99 49.5 24.7 9.88 4.94 NEAREST 1% RG () NC 49.9k 12.4k 5.49k 2.61k 1k 499 249 100 49.9 24.9 9.76 4.87
40k
+ VO = G (VIN VIN )
RG 8
Load VO
VIN
0.1F
NC: No Connection
V
Also drawn in simplified form: + V IN RG INA128 Ref VO
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
OFFSET TRIMMING
The INA128/INA129 is laser trimmed for low offset voltage and offset voltage drift. Most applications require no external offset adjustment. Figure 2 shows an optional circuit for trimming the output offset voltage. The voltage applied to Ref terminal is summed with the output. The op amp buffer provides low impedance at the Ref terminal to preserve good common-mode rejection.
V IN RG + VIN INA128 Ref VO V+ 100A 1/2 REF200 10k 100 Microphone, Hydrophone etc. INA128
47k
47k
Thermocouple
INA128
10k
100
INA128
10
INA128 INA129
www.ti.com SBOS051B OCTOBER 1995 REVISED FEBRUARY 2005
Operation at very low supply voltage requires careful attention to assure that the input voltages remain within their linear range. Voltage swing requirements of internal nodes limit the input common-mode range with low power supply voltage. Typical performance curves, Input Common-Mode Range vs Output Voltage show the range of linear operation for 15V, 5V, and 2.5V supplies.
K
Cu
RG R3 100 = Pt100 at 0C
INA128 Ref
VO
300
ISA TYPE E J
K T
VO
R1 1M
R1
IO +
V IN @G R1
OPA130
IO Load
INA128 Ref
VO
VG 10k
VG
1/2 OPA2131
NOTE: Due to the INA128s current-feedback topology, VG is approximately 0.7V less than the common-mode input voltage. This DC offset in this guard potential is satisfactory for many guarding applications.
www.ti.com
1-Dec-2010
PACKAGING INFORMATION
Orderable Device INA128P INA128PA INA128PAG4 INA128PG4 INA128U INA128U/2K5 INA128U/2K5G4 INA128UA INA128UA/2K5 INA128UA/2K5E4 INA128UA/2K5G4 INA128UAE4 INA128UAG4 INA128UG4 INA129P INA129PA INA129PAG4 Status
(1)
Package Type Package Drawing PDIP PDIP PDIP PDIP SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC PDIP PDIP PDIP P P P P D D D D D D D D D D P P P
Pins 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Eco Plan
(2)
(3)
Samples (Requires Login) Request Free Samples Request Free Samples Request Free Samples Request Free Samples Request Free Samples Purchase Samples Purchase Samples Request Free Samples Purchase Samples Purchase Samples Purchase Samples Request Free Samples Request Free Samples Request Free Samples Request Free Samples Request Free Samples Request Free Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type
Addendum-Page 1
www.ti.com
1-Dec-2010
Orderable Device INA129PG4 INA129U INA129U/2K5 INA129U/2K5G4 INA129UA INA129UA/2K5 INA129UA/2K5E4 INA129UA/2K5G4 INA129UAE4 INA129UG4 SN412014DRE4
Status
(1)
Package Type Package Drawing PDIP SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC SOIC P D D D D D D D D D D
Pins 8 8 8 8 8 8 8 8 8 8 8
Eco Plan
(2)
(3)
Samples (Requires Login) Request Free Samples Request Free Samples Purchase Samples Purchase Samples Request Free Samples Purchase Samples Purchase Samples Purchase Samples Request Free Samples Request Free Samples Purchase Samples
ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
CU NIPDAU N / A for Pkg Type CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR CU NIPDAU Level-3-260C-168 HR
(1)
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Addendum-Page 2
www.ti.com
1-Dec-2010
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF INA129 :
Addendum-Page 3
Device
SPQ
Reel Reel Diameter Width (mm) W1 (mm) 330.0 330.0 330.0 330.0 12.4 12.4 12.4 12.4
A0 (mm)
B0 (mm)
K0 (mm)
Pack Materials-Page 1
Package Drawing D D D D
Pins 8 8 8 8
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Audio Amplifiers Data Converters DLP Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee Solutions www.ti.com/audio amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Applications Communications and Telecom www.ti.com/communications Computers and Peripherals Consumer Electronics Energy and Lighting Industrial Medical Security Space, Avionics and Defense Transportation and Automotive Video and Imaging Wireless www.ti.com/computers www.ti.com/consumer-apps www.ti.com/energy www.ti.com/industrial www.ti.com/medical www.ti.com/security www.ti.com/space-avionics-defense www.ti.com/automotive www.ti.com/video www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2011, Texas Instruments Incorporated