The document lists 4 tools with varying radii from 0.4mm to 1.6mm. For each tool, the feed rate in mm/rev and the corresponding measured surface roughness Ra value in mm is given for feed rates of 0.1, 0.2, 0.4, and 0.8. The surface roughness increases as the tool radius and feed rate increases.
The document lists 4 tools with varying radii from 0.4mm to 1.6mm. For each tool, the feed rate in mm/rev and the corresponding measured surface roughness Ra value in mm is given for feed rates of 0.1, 0.2, 0.4, and 0.8. The surface roughness increases as the tool radius and feed rate increases.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
The document lists 4 tools with varying radii from 0.4mm to 1.6mm. For each tool, the feed rate in mm/rev and the corresponding measured surface roughness Ra value in mm is given for feed rates of 0.1, 0.2, 0.4, and 0.8. The surface roughness increases as the tool radius and feed rate increases.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd