Professional Documents
Culture Documents
K-Series
LH-Series
DLH-Series
Joist Girders
Standard Specifications
Load Tables and Weight Tables
for Steel Joists and Joist Girders
The information presented in this publication has been developed by the Steel Joist Institute and
is produced in accordance with recognized engineering principles and is for general information
only. The SJI and its committees have made a concerted effort to present accurate, reliable, and
useful information on the design of steel joists and Joist Girders. Application of this information
should not be used or relied upon for any specific project without competent professional assessment of its accuracy, suitability and applicability by a licensed professional engineer or architect.
The publication of the material contained in this catalog is not intended as a representation or
warranty on the part of the Steel Joist Institute. Any person making use of this information does
so at ones own risk and assumes all liability arising from such use.
Copyright 2005
by
Steel Joist Institute
All rights reserved. This catalog or any part thereof must not be reproduced in any form without
the written permission of the Steel Joist Institute.
Printed in the United States of America
First Printing December 2005
CONTENTS
101. Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
102. Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
104. Application . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction to K-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Standard Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Added Members . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
JOIST GIRDERS
STANDARD SPECIFICATIONS
Section 1000. Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
K-SERIES
1001. Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
STANDARD SPECIFICATIONS
1002. Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Section 1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1004. Application . . . . . . . . . . . . . . . . . . . . . . . . . . 86
3. Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3. Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4. Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
5. Estimating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
STANDARD SPECIFICATIONS
Section 100. Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Continued on page 2
2005
CONTENTS
APPENDICES
Appendix A - Joist Substitutes, K-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
K-Series LRFD Joist Substitute Load Table U. S. Customary Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
K-Series ASD Joist Substitute Load Table U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
K-Series LRFD Joist Substitute Load Table Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
K-Series ASD Joist Substitute Load Table Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Appendix B - Top Chord Extensions and Extended Ends, K-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
LRFD Top Chord Extension Load Table S-Type U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
LRFD Top Chord Extension Load Table R-Type U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
ASD Top Chord Extension Load Table S-Type U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
ASD Top Chord Extension Load Table R-Type U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
LRFD Top Chord Extension Load Table S-Type Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
LRFD Top Chord Extension Load Table R-Type Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
ASD Top Chord Extension Load Table S-Type Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
ASD Top Chord Extension Load Table R-Type Metric Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
Appendix C - Economy Tables, K-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
LRFD K-Series Economy Table U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
ASD K-Series Economy Table U. S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6
Appendix D - Fire-Resistance Ratings with Steel Joists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
Appendix E - OSHA Safety Standards for Steel Erection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1
Bay Length Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1
Part 1926.751- Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Part 1926.757- Open Web Steel Joists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Illustration of OSHA Bridging Terminus Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7
The following documents contained in this catalog have been approved by the American National Standards Institute (ANSI):
Standard Specifications for Open Web Steel Joists, K-Series and Load Tables (SJI-K-1.1)
Standard Specifications for Longspan Steel Joists, LH-Series and Deep Longspan Steel Joists, DLH-Series and
Load Tables (SJI LH/DLH-1.1)
Standard Specifications for Joist Girders (SJI-JG-1.1)
1965
Development of a single specification for both the J- and HSeries Joists by the Steel Joist Institute and the American
Institute of Steel Construction.
HISTORY
Formed five years after the first open web steel joist was
manufactured, the Institute has worked since 1928 to maintain sound engineering practice throughout our industry. As
a non-profit organization of active manufacturers, the
Institute cooperates with governmental and business agencies to establish steel joist standards. Continuing research
and updating are included in its work.
1966
Development and introduction by the SJI and AISC of the
LJ-Series Joists, which replaced the LA-Series Joists. Also,
the development of a single specification for both the LJand the LH-Series Joists, with the use of 36,000 psi minimum yield strength steel for the LJ-Series, and 36,000 psi to
50,000 psi minimum yield strength steel for the LH-Series.
The first joist in 1923 was a Warren truss type, with top and
bottom chords of round bars and a web formed from a single
continuous bent bar. Various other types were developed, but
problems also followed because each manufacturer had their
own design and fabrication standards. Architects, engineers
and builders found it difficult to compare rated capacities and
to use fully the economies of steel joist construction.
1970
Introduction of the DLJ- and DLH-Series Joists to include
depths through 72 inches and spans through 144 feet.
1971
Elimination of chord section number 2 and the addition of
joist designations 8J3 and 8H3 to the load tables.
1972
(a) Adoption by the SJI and AISC of a single specification
for the LJ-, LH-, DLJ-, and DLH-Series Joists.
(b) Adoption by the SJI and AISC of the expanded specifications and load tables for Open Web Steel Joists with
increased depths through 30 inches, and spans through
60 feet, plus adding chord section numbers 9,10, and 11.
1978
(a) Elimination of the J-, LJ-, and DLJ-Series Joists because
of the widespread acceptance of high strength steel
joists.
1959
Introduction of the S-Series Joists, which replaced the SJSeries Joists. The allowable tensile stress was increased
from 18,000 to 20,000 psi, joist depths were expanded
through 24 inches, and spans increased through 48 feet.
(b) Introduction of Joist Girders, complete with specifications and weight tables, in response to the growing need
for longer span primary structural members with highly
efficient use of steel.
1961
(a) Introduction of the J-Series Joists, which replaced the SSeries Joists. The allowable tensile stress was
increased from 20,000 psi to 22,000 psi, based on the
use of steel with a minimum yield strength of 36,000 psi.
1986
Introduction of the K-Series Joists, which replaced the HSeries Joists. The reasons for developing the K-Series Joists
were: (1) to achieve greater economies by utilizing the Load
Span design concept; (2) to meet the demand for roofs with
lighter loads at depths from 18 inches to 30 inches; (3) to
offer joists whose load carrying capacities at frequently used
spans are those most commonly required; (4) to eliminate the
very heavy joists in medium depths for which there was little,
if any, demand.
1994
(a) Introduction of the KCS Joists as a part of the K-Series
Specification in response to the need for a joist with a
constant moment and constant shear. The KCS Joist is
an economical alternative joist that may be specified for
special loading situations.
1962
Introduction of the LH-Series Joists, utilizing steel whose minimum yield strength was between 36,000 psi and 50,000 psi
and an allowable tensile strength of 22,000 psi to 30,000 psi.
MEMBERSHIP
Open to manufacturers who produce, on a continuing basis,
joists of the K-, LH-, and DLH-Series, and/or Joist Girders,
conforming to the Institutes Specifications and Load Tables.
Membership requirements differ as described below.
An initial plant inspection and subsequent biennial inspections are required to ensure that the applicant/member possesses the facilities, equipment and personnel required to
properly fabricate the K-Series Joists.
SERVICES TO NONMEMBERS
POLICY
The manufacturers of any standard SJI products shall be
required to submit design data for verification of compliance
with Steel Joist Institute Specifications, undergo physical
design verification tests (on K-Series only), and undergo an
initial plant inspection and subsequent biennial in-plant
inspections for all products for which they wish to be certified.
The Steel Joist Institute does not check joist designs for specific
construction projects. Fabrication to Institute Specifications is
the responsibility of the individual manufacturer.
SJI Member companies complying with the above conditions shall be licensed to publish the appropriate copyrighted SJI Specifications, Load Tables and Weight Tables.
The open webs in the joists permit the ready passage and
concealment of pipes, ducts and electric conduits within the
depth of the floor. In high rise buildings this can result in a
reduced overall building height, which translates into considerable cost savings. As soon as the joists are erected
and bridged, with ends properly attached, a working platform
is available for the immediate follow-up of allied trades; this
allows field work to progress rapidly and efficiently.
INTRODUCTION TO K-SERIES
The LH- and DLH-Series have been designed for the purpose
of extending the use of joists to spans and loads in excess of
those covered by Open Web Steel Joists, K-Series.
Longspan Series Joists have been standardized in depths
from 18 inches (457 mm) through 48 inches (1219 mm), for
clear spans through 96 feet (29,260 mm).
STANDARD TYPES
Longspan and Deep Longspan Steel Joists can be furnished
with either under-slung or square ends, with parallel chords
or with single or double pitched top chords to provide sufficient slope for roof drainage. Square end joists are primarily intended for bottom chord bearing.
ADDED MEMBERS
CL OF PANEL POINT
CL OF POINT LOAD
FIELD INSTALLED
MEMBER BRACE, EACH SIDE
NOT BY JOIST MANUFACTURER.
AS SPECIFIED
EACH END (TYP.)
CL OF PANEL POINT
CL OF POINT LOAD
MAY VARY BY
MANUFACTURER
CEILING EXTENSION
HORIZONTAL
BRIDGING
BRIDGING ANCHORS
BY OTHERS, U.O.N.
WELD
FIELD WELDED
HORIZONTAL BRIDGING
SEE SJI SPECIFICATIONS
NOTE: DO NOT WELD BRIDGING TO JOIST WEB MEMBERS.
DO NOT HANG ANY MECHANICAL, ELECTRICAL, ETC. FROM BRIDGING.
EXPANSION BOLTS
BY OTHERS
BRIDGING ANCHORS
BY OTHERS, U.O.N.
BOLT (TYP.)
HORIZONTAL BRIDGING
CUT TO FIT IN FIELD LAP TO BE 2" MIN.
USE ALL DROPS.
2"
1/8
1/8
FIELD WELD
SEE SPEC 5.4
1/8
FIELD WELD
SEE SPEC 5.4
1/8
FIELD WELD
SEE SPEC 5.4
FIELD WELD
SEE SPEC 5.4
2"
HORIZONTAL BRIDGING
SEE SJI SPECIFICATIONS
NOTE: DO NOT WELD BRIDGING TO WEB MEMBERS.
DO NOT HANG ANY MECHANICAL, ELECTRICAL, ETC.
FROM BRIDGING.
EXPANSION BOLTS
BY OTHERS
BRIDGING ANCHORS
BY OTHERS, U.O.N.
BOLT (TYP.)
HORIZONTAL BRIDGING
CUT TO FIT IN FIELD LAP TO BE 2" MIN.
USE ALL DROPS.
2"
1/8
1/8
FIELD WELD
SEE SPEC 104.5
1/8
FIELD WELD
SEE SPEC 104.5
FIELD WELD
SEE SPEC 104.5
2"
1/8
FIELD WELD
SEE SPEC 104.5
HIGH END
LOW END
NO
TCX
NO END OF SEAT
TCX
END OF SEAT
12"
SLOPE
SLOPE
RATE
12"
SLOPE
2 1/2"
MIN.
4"
STD.
WITH
TCX
E.O.B.
2 1/2"
END OF SEAT
12"
SLOPE
WITH
TCX
SLOPE
3"
4"
STD.
E.O.B.: EDGE OF BEARING
SEE
CHART d
3/8: 12
1/2: 12
1: 12
4"
STD.
C 1 1/2: 12
2: 12
END OF
SEAT
2 1/2: 12
12"
3: 12
2 1/2" 3 1/2: 12
SEE
4: 12
CHART d
4 1/2: 12
5: 12
6: 12 &
4"
STD.
OVER
D
HIGH END
SEAT
DEPTH
d
(MIN.)
3"
3"
3 1/2"
3 1/2"
4"
4"
4"
4 1/2"
4 1/2"
4 1/2"
5"
SEE
BELOW
NOTES:
(1) Depths shown are the minimums required for manufacturing of sloped bearing seats. Depths may vary depending on actual
bearing conditions.
(2) d = 1/2 + 2.5 / cos + 4 tan
(3) Clearance must be checked at outer edge of support as shown in Detail B. Increase bearing depth as required to permit passage
of 2 1/2" deep extension.
(4) If extension depth greater than 2 1/2" is required (see Details B and D) increase bearing depths accordingly.
(5) If slope is 1/4: 12 or less, sloped seats are not required.
10
HIGH END
LOW END
NO
TCX
NO
TCX
END OF SEAT
12"
SLOPE
END OF SEAT
SLOPE
RATE
12"
SLOPE
SEE
CHART d
5" MIN.
WITH
TCX
E.O.B.
5"
3/8: 12
1/2: 12
1: 12
6"
6"
A
STD.
STD.
C 1 1/2: 12
END OF
END OF SEAT WITH
2: 12
TCX
SEAT
12"
2 1/2: 12
12"
SLOPE
3: 12
SLOPE
5"
3 1/2: 12
SEE
4: 12
CHART d
5 1/2"
4 1/2: 12
5: 12
6"
6: 12 &
6"
STD.
STD.
OVER
HIGH END
SEAT
DEPTH
d
(MIN.)
5 1/2"
6"
6"
6 1/2"
6 1/2"
7"
7"
7 1/2"
8"
8"
8 1/2"
SEE
BELOW
Notes:
(1) Depths shown are the minimums required for manufacturing of sloped bearing seats.
(2) d = 1/2 + 5 / cos + 6 tan
(3) Clearance must checked at outer edge of support as shown in Detail B. Increase bearing depth as required to permit passage
of 5" deep extension.
(4) If extension depth greater than 5" is required (see Details B and D) increase bearing depths accordingly.
(5) Add 2 1/2" to seat depth at 18 and 19 chord section numbers. Consult manufacturer for information when TCXs are present.
11
ROUND
SQUARE
RECTANGLE
8 INCHES
5 INCHES
4x4 INCHES
3x6 INCHES
10 INCHES
5 INCHES
4x4 INCHES
3x7 INCHES
12 INCHES
7 INCHES
5x5 INCHES
3x8 INCHES
14 INCHES
8 INCHES
6x6 INCHES
5x9 INCHES
16 INCHES
8 INCHES
6x6 INCHES
5x9 INCHES
18 INCHES
9 INCHES
7x7 INCHES
5x9 INCHES
20 INCHES
10 INCHES
8x8 INCHES
6x11 INCHES
22 INCHES
10 INCHES
9x9 INCHES
7x11 INCHES
24 INCHES
12 INCHES
10x10 INCHES
7x13 INCHES
26 INCHES
15 INCHES*
12x12 INCHES*
9x18 INCHES*
28 INCHES
16 INCHES*
13x13 INCHES*
9x18 INCHES*
30 INCHES
17 INCHES*
14x14 INCHES*
10x18 INCHES*
SPECIFYING PROFESSIONAL MUST INDICATE ON STRUCTURAL DRAWINGS SIZE AND LOCATION OF ANY DUCT THAT
IS TO PASS THRU JOIST. THIS DOES NOT INCLUDE ANY FIREPROOFING ATTACHED TO JOIST. FOR DEEPER LH- AND
DLH-SERIES JOISTS, CONSULT MANUFACTURER.
* FOR ROD WEB CONFIGURATION THESE WILL BE REDUCED, CONSULT MANUFACTURER.
12
STANDARD SPECIFICATIONS
FOR OPEN WEB STEEL JOISTS, K-SERIES
Adopted by the Steel Joist Institute November 4, 1985
Revised to November 10, 2003 - Effective March 01, 2005
SECTION 1.
SECTION 3.
SCOPE
MATERIALS
3.1 STEEL
SECTION 2.
High-Strength,
A242/A242M.
DEFINITION
Low-Alloy
Structural
Steel, ASTM
Steel, Sheet, Cold-Rolled, Carbon, Structural, HighStrength Low-Alloy and High-Strength Low-Alloy with
Improved Formability, ASTM A1008/A1008M
Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability, ASTM A1011/A1011M
* The term Yield Strength as used herein shall designate the yield level of a material as determined by the
applicable method outlined in paragraph 13.1 Yield
Point, and in paragraph 13.2 Yield Strength, of
ASTM A370, Standard Test Methods and Definitions
for Mechanical Testing of Steel Products, or as specified in paragraph 3.2 of this specification.
13
SECTION 4.
DESIGN AND
MANUFACTURE
4.1 METHOD
Joists shall be designed in accordance with these specifications
as simply supported, uniformly loaded trusses supporting a
floor or roof deck so constructed as to brace the top chord of
the joists against lateral buckling. Where any applicable design
feature is not specifically covered herein, the design shall be in
accordance with the following specifications:
Load Combinations:
b) Where tension tests are made for acceptance and control purposes, the tensile strength shall be at least 6 percent greater than the yield strength of the section.
LRFD:
When load combinations are not specified to the joist manufacturer, the required stress shall be computed for the factored
loads based on the factors and load combinations as follows:
1.4D
1.2D + 1.6 ( L, or Lr, or S, or R )
ASD:
When load combinations are not specified to the joist manufacturer, the required stress shall be computed based on the
load combinations as follows:
D
D + ( L, or Lr, or S, or R )
3.3 PAINT
Where:
S = snow load
b) Or, shall be a shop paint which meets the minimum performance requirements of the above listed specification.
14
required stress
ksi (MPa)
Fn
nominal stress
ksi (MPa)
resistance factor
Fn
design stress
required stress
ksi (MPa)
Fn
nominal stress
ksi (MPa)
safety factor
Fn/ =
allowable stress
Stresses:
(a) Tension: t = 0.90 (LRFD) = 1.67 (ASD)
For Webs: Fy = 50 ksi (345 MPa), or Fy = 36 ksi (250 MPa)
Design Stress = 0.9Fy (LRFD)
(4.2-1)
(4.2-2)
E
QFy
Fe
Fy
> 4.71
(4.2-11)
(4.2-12)
(4.2-13)
(4.2-3)
For members with l
r
(4.2-10)
QFy
Fcr = Q 0.658
4.71
(4.2-8)
(4.2-9)
QFy
(4.2-4)
4.4 MEMBERS
2 E
l
(a) Chords
The bottom chord shall be designed as an axially loaded
tension member.
(4.2-5)
(4.2-6)
(4.2-7)
In the above equations, l is taken as the distance in inches (millimeters) between panel points for the chord mem-
15
For ASD:
The top chord shall be designed for only axial compressive stress when the panel length, l, does not exceed
24 inches (609 mm). When the panel length exceeds
24 inches (609 mm), the top chord shall be designed as
a continuous member subject to combined axial and
bending stresses and shall be so proportioned that:
for
For LRFD:
fa
Fa
0.2,
Cmfb
for
fa 8
+
Fa 9
(4.4-1)
fau
cFe
for
fau
+
2c Fcr
fau
0.2,
cFcr
Cmfbu
8
fau
+
cFcr 9
(4.4-4)
for
Q bFy
1.0 (4.4-2)
fa
+
2Fa
fau
< 0.2,
cFcr
fa
Fa
QFb
1.0 (4.4-5)
< 0.2,
Cmfb
1
1.67fa
Fe
1.0
(4.4-6)
QFb
Cmfbu
f
1 au
cFe
1.67fa
Fe
1.0
(4.4-3)
Q bFy
(b) Web
The vertical shears to be used in the design of the web
members shall be determined from full uniform loading, but
such vertical shears shall be not less than 25 percent of the
end reaction. Due consideration shall be given to the effect
of eccentricity. The effect of combined axial compression
and bending may be investigated using the provisions of
Section 4.4(a), letting Cm = 0.4 when bending due to
eccentricity produces reversed curvature.
2 E
l
, ksi (MPa)
rx
16
(c) Eccentricity
top chords or full depth cantilever ends shall be clearly indicated on the structural drawings.
4.5 CONNECTIONS
(a) Methods
Joist connections and splices shall be made by attaching
the members to one another by arc or resistance welding
or other accredited methods.
(1) Welded Connections
a) Selected welds shall be inspected visually by the
manufacturer. Prior to this inspection, weld slag
shall be removed.
b) Cracks are not acceptable and shall be repaired.
c) Thorough fusion shall exist between weld and base
metal for the required design length of the weld;
such fusion shall be verified by visual inspection.
4.6 CAMBER
Joists shall have approximate camber in accordance with the
following:
TABLE 4.6-1
Approximate Camber
20'-0"
(6096 mm)
1/4"
(6 mm)
30'-0"
(9144 mm)
3/8"
(10 mm)
40'-0"
(12192 mm)
5/8"
(16 mm)
50'-0"
(15240 mm)
1"
(25 mm)
60'-0"
(18288 mm)
1 1/2"
(38 mm)
The specifying professional shall give consideration to coordinating joist camber with adjacent framing.
(b) Strength
(1) Joint Connections - Joint connections shall be capable
of withstanding forces due to an ultimate load equal to
at least 1.35 times the LRFD, or 2.0 times the ASD load
shown in the applicable Standard Load Table.
(2) Shop Splices Splices may occur at any point in chord
or web members. Members containing a butt weld
splice shall develop an ultimate tensile force of at least
57 ksi (393 MPa) times the full design area of the chord
or web. The term member shall be defined as all
component parts comprising the chord or web, at the
point of the splice.
17
(b) Steel
Due consideration of the end reactions and all other vertical and lateral forces shall be taken by the specifying
professional in the design of the steel support. The ends
of K-Series Joists shall extend a distance of not less than
2 1/2 inches (64 millimeters) over the steel supports.
5.4 BRIDGING
SECTION 5.
APPLICATION
(a) Horizontal
5.1 USAGE
(b) Diagonal
Diagonal bridging shall consist of cross-bracing with a
l/r ratio of not more than 200, where l is the distance in
inches (millimeters) between connections and r is the least
radius of gyration of the bracing member. Where crossbracing members are connected at their point of intersection, the l distance shall be taken as the distance in inches
(millimeters) between connections at the point of intersection of the bracing members and the connections to the
chord of the joists. Connections to the chords of steel joists
shall be made by positive mechanical means or by welding.
5.2 SPAN
The span of a joist shall not exceed 24 times its depth.
18
TABLE 5.4-1
U. S. UNITS
*Section
Number
One
Row
Two
Rows
Three
Rows
Four
Rows
#1
Up thru 16
Over 16 thru 24
Over 24 thru 28
#2
Up thru 17
Over 17 thru 25
Over 25 thru 32
#3
Up thru 18
Over 18 thru 28
Over 28 thru 38
Over 38 thru 48
#5
Up thru 19
Over 19 thru 29
Over 29 thru 39
Over 39 thru 50
Over 50 thru 52
#6
Up thru 19
Over 19 thru 29
Over 29 thru 39
Over 39 thru 51
Over 51 thru 56
#7
Up thru 20
Over 20 thru 33
Over 33 thru 45
Over 45 thru 58
Over 58 thru 60
#8
Up thru 20
Over 20 thru 33
Over 33 thru 45
Over 45 thru 58
Over 58 thru 60
Over 59 thru 60
#9
Up thru 20
Over 20 thru 33
Over 33 thru 46
Over 46 thru 59
#10
Up thru 20
Over 20 thru 37
Over 37 thru 51
Over 51 thru 60
#11
Up thru 20
Over 20 thru 38
Over 38 thru 53
Over 53 thru 60
#12
Up thru 20
Over 20 thru 39
Over 39 thru 53
Over 53 thru 60
Five
Rows
TABLE 5.4-2
METRIC UNITS
Refer to the K-Series Metric Load Table and Specification Section 6 for required bolted diagonal bridging.
Distances are Joist Span lengths in millimeters - See Definition of Span preceding Load Table.
*Section
Number
One
Row
Two
Rows
Three
Rows
#1
up thru 4877
#2
up thru 5182
#3
up thru 5486
Four
Rows
Five
Rows
#4
up thru 5791
#5
up thru 5791
#6
up thru 5791
#7
up thru 6096
#8
up thru 6096
#9
up thru 6096
#10
up thru 6096
#11
up thru 6096
#12
up thru 6096
19
(d) Bearing
Slabs or decks shall bear uniformly along the top chords
of the joists.
Bridging shall support the top and bottom chords against lateral movement during the construction period and shall hold the
steel joists in the approximate position as shown on the joist
placement plans.
(e) Attachments
The spacing for slab or deck attachments along the joist
top chord shall not exceed 36 inches (914 millimeters),
and shall be capable of resisting a nominal (unfactored)
lateral force of not less than 300 pounds (1335 Newtons),
i.e., 100 plf (1.46 kN/m).
(b) Steel
Horizontal bridging members attached to the compression chords and their anchorages must be designed for
a compressive axial force of 0.0025nP, where n is the
number of joists between end anchors and P is the chord
design force in kips (Newtons). The attachment force
between the horizontal bridging member and the compression chord is 0.005P. Horizontal bridging attached to
the tension chords shall be proportioned so that the slenderness ratio between attachments does not exceed 300.
Diagonal bridging shall be proportioned so that the slenderness ratio between attachments does not exceed 200.
20
5.9 DEFLECTION
SECTION 6.*
The deflection due to the design nominal live load shall not
exceed the following:
ERECTION STABILITY
AND HANDLING
5.10 PONDING*
The ponding investigation shall be performed by the specifying
professional.
When a bolted seat connection is used for erection purposes, as a minimum, the bolts must be snug tightened.
The snug tight condition is defined as the tightness that
exists when all plies of a joint are in firm contact. This
may be attained by a few impacts of an impact wrench
or the full effort of an employee using an ordinary spud
wrench.
5.11 UPLIFT
Where uplift forces due to wind are a design requirement,
these forces must be indicated on the contract drawings in
terms of NET uplift in pounds per square foot (Pascals). The
contract documents shall indicate if the net uplift is based
upon LRFD or ASD. When these forces are specified, they
must be considered in the design of joists and/or bridging. A
single line of bottom chord bridging must be provided near
the first bottom chord panel points whenever uplift due to
wind forces is a design consideration.*
3) Where the span of the steel joist is within the Red shaded area of the Load Table, the following shall apply:
5.12 INSPECTION
Joists shall be inspected by the manufacturer before shipment
to verify compliance of materials and workmanship with the
requirements of these specifications. If the purchaser wishes
an inspection of the steel joists by someone other than the
manufacturers own inspectors, they may reserve the right to
do so in their Invitation to Bid or the accompanying Job
Specifications.
6) After the joist is straightened and plumbed, and all bridging is completely installed and anchored, the ends of the
joists shall be fully connected to the supports in accordance with Section 5.6 End Anchorage.
21
(d) Handling
Care shall be exercised at all times to avoid damage to the
joists and accessories.
(e) Fall Arrest Systems
Steel joists shall not be used as anchorage points for a fall
arrest system unless written direction to do so is obtained
from a qualified person (2).
(2)
22
DEFINITION OF SPAN
(U. S. Customary Units)
CL
SPAN
BEARING LENGTH
BEARING LENGTH
CL
SPAN
BEARING LENGTH
BEARING LENGTH
SPAN
BEARING LENGTH
BEARING LENGTH
23
SEAT
DEPTH
CL
The black figures in the following table give the TOTAL safe
factored uniformly distributed load-carrying capacities, in
pounds per linear foot, of LRFD K-Series Steel Joists. The
weight of factored DEAD loads, including the joists, must be
deducted to determine the factored LIVE load-carrying capacities of the joists. Sloped parallel-chord joists shall use span as
defined by the length along the slope.
The figures shown in RED in this load table are the unfactored
nominal LIVE loads per linear foot of joist which will produce
an approximate deflection of 1/360 of the span. LIVE loads
which will produce a deflection of 1/240 of the span may be
obtained by multiplying the figures in RED by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
LRFD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (in.)
Approx. Wt
(lbs./ft.)
Span (ft.)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
8K1
10K1
12K1
12K3
12K5
14K1
14K3
14K4
14K6
16K3
16K4
16K5
16K6
16K7
10
12
12
12
14
14
14
14
16
16
16
16
16
16
16
5.1
5.0
5.0
5.7
7.1
5.2
6.0
6.7
7.7
5.5
6.3
7.0
7.5
8.1
8.6
10.0
825
550
825
510
750
425
651
344
570
282
504
234
448
197
402
167
361
142
327
123
298
106
271
93
249
81
825
550
825
510
825
463
814
428
714
351
630
291
561
245
502
207
453
177
409
153
373
132
340
116
312
101
825
550
825
510
825
463
825
434
825
396
825
366
760
317
681
269
613
230
555
198
505
172
462
150
423
132
825
550
766
475
672
390
592
324
528
272
472
230
426
197
385
170
351
147
321
128
294
113
270
100
249
88
231
79
214
70
825
550
825
507
825
467
742
404
661
339
592
287
534
246
483
212
439
184
402
160
367
141
339
124
313
110
289
98
270
88
825
550
825
507
825
467
825
443
795
397
712
336
642
287
582
248
529
215
483
188
442
165
408
145
376
129
349
115
324
103
825
550
825
507
825
467
825
443
825
408
825
383
787
347
712
299
648
259
592
226
543
199
501
175
462
156
427
139
397
124
825
550
768
488
684
409
612
347
552
297
499
255
454
222
415
194
381
170
351
150
324
133
300
119
279
106
259
95
241
86
226
78
213
71
825
550
825
526
762
456
682
386
615
330
556
285
505
247
462
216
424
189
390
167
360
148
334
132
310
118
289
106
270
96
252
87
237
79
825
550
825
526
825
490
820
452
739
386
670
333
609
289
556
252
510
221
469
195
433
173
402
155
373
138
348
124
324
112
304
101
285
92
825
550
825
526
825
490
825
455
825
426
754
373
687
323
627
282
576
248
529
219
489
194
453
173
421
155
391
139
366
126
342
114
321
103
825
550
825
526
825
490
825
455
825
426
822
405
747
351
682
307
627
269
576
238
532
211
493
188
459
168
427
151
399
137
373
124
349
112
825
550
825
526
825
490
825
455
825
426
825
406
825
385
760
339
697
298
642
263
592
233
549
208
510
186
475
167
444
151
415
137
388
124
825
550
825
526
825
490
825
455
825
426
825
406
825
385
825
363
825
346
771
311
711
276
658
246
612
220
570
198
532
178
498
161
466
147
825
550
825
550
825
480
798
377
666
288
565
225
486
179
421
145
369
119
825
550
825
542
825
455
718
363
618
289
537
234
469
192
415
159
369
134
331
113
298
97
29
30
31
32
24
16K2
16K9
LRFD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
18K3
18K4
18K5
18K6
18K7
20K3
20K4
20K5
20K6
22K4
22K5
22K6
22K7
18
18
18
18
18
18K9 18K10
18
18
20
20
20
20
20
20
20
22
22
22
22
22
22
22
6.6
7.2
7.7
8.5
10.2
11.7
6.7
7.6
8.2
8.9
9.3
10.8
12.2
8.8
9.2
9.7
11.3
12.6
13.8
825
550
771
494
694
423
630
364
573
316
523
276
480
242
441
214
408
190
378
169
351
151
327
136
304
123
285
111
267
101
252
92
237
84
223
77
211
70
825
550
825
523
825
490
759
426
690
370
630
323
577
284
532
250
492
222
454
198
423
177
394
159
367
144
343
130
322
118
303
108
285
98
268
90
253
82
825
550
825
523
825
490
825
460
777
414
709
362
651
318
600
281
553
249
513
222
477
199
444
179
414
161
387
146
363
132
342
121
321
110
303
101
286
92
825
550
825
523
825
490
825
460
825
438
774
393
709
345
652
305
603
271
558
241
519
216
483
194
451
175
421
158
396
144
372
131
349
120
330
110
312
101
825
550
825
523
825
490
825
460
825
438
825
418
789
382
727
337
672
299
622
267
577
239
538
215
502
194
469
175
441
159
414
145
390
132
367
121
348
111
825
550
825
523
825
490
825
460
825
438
825
418
825
396
825
377
807
354
747
315
694
282
646
254
603
229
564
207
529
188
498
171
468
156
441
143
417
132
825
550
825
523
825
490
825
460
825
438
825
418
825
396
825
377
825
361
825
347
822
331
766
298
715
269
669
243
627
221
589
201
555
184
523
168
495
154
775
517
702
453
639
393
583
344
535
302
493
266
456
236
421
211
391
189
364
170
340
153
318
138
298
126
280
114
264
105
249
96
235
88
222
81
211
74
199
69
190
64
825
550
825
520
771
461
703
402
645
353
594
312
549
277
508
247
472
221
439
199
411
179
384
162
360
147
339
134
318
122
300
112
283
103
268
95
255
87
241
81
229
75
825
550
825
520
825
490
793
451
727
396
669
350
618
310
573
277
532
248
495
223
462
201
433
182
406
165
381
150
358
137
339
126
319
115
303
106
286
98
271
90
258
84
825
550
825
520
825
490
825
468
792
430
729
380
673
337
624
301
579
269
540
242
504
218
471
198
442
179
415
163
391
149
369
137
348
125
330
115
312
106
297
98
282
91
825
550
825
520
825
490
825
468
825
448
811
421
750
373
694
333
645
298
601
268
561
242
525
219
492
199
463
181
435
165
411
151
388
139
367
128
348
118
330
109
313
101
825
550
825
520
825
490
825
468
825
448
825
426
825
405
825
389
775
353
723
317
675
286
631
259
592
235
556
214
523
195
493
179
466
164
441
151
418
139
397
129
376
119
825
550
825
520
825
490
825
468
825
448
825
426
825
405
825
389
825
375
825
359
799
336
748
304
702
276
660
251
621
229
585
210
553
193
523
178
496
164
471
151
447
140
825
548
777
491
712
431
657
381
606
338
561
301
522
270
486
242
453
219
424
198
397
180
373
164
352
149
331
137
313
126
297
116
280
107
267
98
253
91
241
85
229
79
219
73
208
68
825
548
825
518
804
483
739
427
682
379
633
337
588
302
547
272
511
245
478
222
448
201
421
183
397
167
373
153
354
141
334
130
316
119
300
110
285
102
271
95
259
88
247
82
235
76
825
548
825
518
825
495
805
464
744
411
688
367
640
328
597
295
556
266
520
241
489
219
459
199
432
182
408
167
385
153
364
141
345
130
327
120
310
111
295
103
282
96
268
89
256
83
825
548
825
518
825
495
825
474
825
454
768
406
712
364
664
327
619
295
580
267
544
242
511
221
481
202
454
185
429
169
406
156
384
144
364
133
346
123
330
114
313
106
300
99
286
92
825
548
825
518
825
495
825
474
825
454
825
432
825
413
798
387
745
349
697
316
654
287
615
261
579
239
546
219
516
201
487
185
462
170
438
157
417
146
396
135
378
126
360
117
343
109
825
548
825
518
825
495
825
474
825
454
825
432
825
413
825
399
825
385
825
369
775
337
729
307
687
280
648
257
612
236
579
217
549
200
520
185
495
171
471
159
448
148
427
138
408
128
825
548
825
518
825
495
825
474
825
454
825
432
825
413
825
399
825
385
825
369
823
355
798
334
774
314
741
292
700
269
663
247
628
228
595
211
565
195
538
181
513
168
489
157
466
146
Span (ft.)
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
25
LRFD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
24K4
24K5
24K6
24K7
24K8
24K9
24K10
24K12
26K5
26K6
26K7
26K8
26K9
26K10
24
24
24
24
24
24
24
24
26
26
26
26
26
26
26K12
26
8.4
9.3
9.7
10.1
11.5
12.0
13.1
16.0
9.8
10.6
10.9
12.1
12.2
13.8
16.6
780
516
718
456
663
405
615
361
571
323
531
290
496
262
465
237
435
215
409
196
385
179
363
164
343
150
324
138
307
128
292
118
277
109
264
101
252
94
240
88
229
82
219
76
208
71
199
67
192
63
825
544
810
511
748
453
693
404
643
362
600
325
559
293
523
266
490
241
462
220
435
201
409
184
387
169
366
155
346
143
328
132
312
122
297
114
283
106
270
98
258
92
246
86
235
80
225
75
216
70
825
544
825
520
814
493
754
439
700
393
652
354
609
319
570
289
535
262
502
239
472
218
445
200
421
183
399
169
378
156
358
144
340
133
324
124
309
115
294
107
280
100
268
93
256
87
246
82
235
77
825
544
825
520
825
499
825
479
781
436
727
392
679
353
636
320
595
290
559
265
526
242
496
221
469
203
444
187
421
172
399
159
379
148
361
137
343
127
328
118
313
110
298
103
286
97
274
90
262
85
825
544
825
520
825
499
825
479
825
456
804
429
750
387
702
350
658
318
619
289
582
264
549
242
519
222
490
205
465
189
441
174
420
161
399
150
379
139
363
130
346
121
330
113
316
106
303
99
291
93
825
544
825
520
825
499
825
479
825
456
825
436
816
419
765
379
717
344
673
313
634
286
598
262
565
241
534
222
507
204
480
189
456
175
435
162
414
151
394
140
376
131
360
122
345
114
330
107
316
101
825
544
825
520
825
499
825
479
825
456
825
436
825
422
825
410
823
393
798
368
753
337
709
308
670
283
634
260
601
240
570
222
541
206
516
191
490
177
468
165
447
154
427
144
408
135
391
126
375
118
825
544
825
520
825
499
825
479
825
456
825
436
825
422
825
410
823
393
798
368
774
344
751
324
730
306
711
290
691
275
673
261
657
247
640
235
625
224
609
213
580
199
555
185
531
174
508
163
487
153
813
535
753
477
699
427
651
384
607
346
568
314
534
285
501
259
472
237
445
217
420
199
397
183
376
169
357
156
340
145
322
134
307
125
294
116
280
108
268
101
256
95
246
89
235
83
225
78
216
73
208
69
199
65
825
541
820
519
762
464
709
417
661
377
619
341
580
309
546
282
514
257
484
236
457
216
433
199
411
184
390
170
370
157
352
146
336
136
319
126
306
118
291
110
279
103
267
96
256
90
246
85
235
80
226
75
217
71
825
541
825
522
825
501
790
463
738
417
690
378
648
343
609
312
573
285
540
261
510
240
483
221
457
204
433
188
412
174
393
162
373
150
357
140
340
131
325
122
310
114
298
107
285
100
274
94
262
89
252
83
243
79
825
541
825
522
825
501
825
479
816
457
763
413
715
375
672
342
633
312
597
286
564
263
534
242
505
223
480
206
456
191
433
177
412
164
394
153
376
143
360
133
343
125
328
117
315
110
303
103
291
97
279
91
268
86
825
541
825
522
825
501
825
479
825
459
825
444
778
407
732
370
688
338
649
310
613
284
580
262
550
241
522
223
496
207
472
192
450
178
429
166
409
155
391
145
375
135
358
127
343
119
330
112
316
105
304
99
292
93
825
541
825
522
825
501
825
479
825
459
825
444
823
431
798
404
774
378
751
356
729
334
690
308
654
284
619
262
589
243
561
225
534
210
508
195
486
182
465
170
444
159
426
149
408
140
391
131
375
124
361
116
346
110
825
541
825
522
825
501
825
479
825
459
825
444
823
431
798
404
774
378
751
356
730
334
711
315
691
299
673
283
657
269
640
256
625
244
610
232
597
222
583
212
570
203
553
192
529
180
508
169
487
159
469
150
451
142
Span (ft.)
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
26
LRFD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
Span (ft.)
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
28K6
28K7
28K8
28K9
28K10
28K12
30K7
30K8
30K9
30K10
30K11
28
28
28
28
28
28
30
30
30
30
30
30
11.4
11.8
12.7
13.0
14.3
17.1
12.3
13.2
13.4
15.0
16.4
17.6
822
541
766
486
715
439
669
397
627
361
589
329
555
300
523
275
495
252
468
232
444
214
420
198
399
183
379
170
361
158
345
147
330
137
315
128
301
120
288
112
276
105
265
99
255
93
244
88
235
83
226
78
217
74
210
70
202
66
825
543
825
522
796
486
745
440
699
400
657
364
618
333
583
305
550
280
522
257
493
237
469
219
445
203
424
189
403
175
385
163
367
152
351
142
336
133
321
125
309
117
295
110
283
103
273
97
262
92
252
87
243
82
234
77
226
73
825
543
825
522
825
500
825
480
772
438
726
399
684
364
645
333
609
306
576
282
546
260
519
240
492
222
468
206
445
192
426
179
406
167
388
156
372
146
355
136
340
128
327
120
313
113
301
106
289
100
279
95
268
89
259
85
249
80
825
543
825
522
825
500
825
480
823
463
790
432
744
395
702
361
663
332
627
305
594
282
564
260
535
241
510
224
486
208
463
194
442
181
423
169
405
158
387
148
370
139
355
130
342
123
328
115
315
109
304
103
292
97
282
92
271
87
825
543
825
522
825
500
825
480
823
463
798
435
774
410
751
389
730
366
711
344
691
325
670
306
636
284
606
263
576
245
550
228
525
212
501
198
480
186
459
174
441
163
423
153
405
144
390
136
375
128
360
121
348
114
334
108
322
102
825
543
825
522
825
500
825
480
823
463
798
435
774
410
751
389
730
366
711
344
691
325
673
308
657
291
640
277
625
264
610
252
597
240
583
229
570
219
558
210
547
201
535
193
525
185
507
175
487
165
469
156
451
147
435
139
420
132
825
543
801
508
751
461
706
420
664
384
627
351
592
323
559
297
531
274
504
253
478
234
454
217
433
202
414
188
394
176
376
164
361
153
345
144
331
135
318
127
304
119
292
112
282
106
271
100
261
94
252
89
243
84
234
80
226
76
219
72
211
69
825
543
825
520
823
500
780
460
735
420
693
384
654
353
619
325
586
300
556
277
529
256
502
238
480
221
457
206
436
192
417
179
399
168
382
157
366
148
351
139
337
130
324
123
312
116
300
109
288
103
277
98
268
92
259
88
250
83
241
79
234
75
825
543
825
520
823
500
798
468
774
441
751
415
712
383
673
352
639
325
606
300
576
278
547
258
522
240
498
223
475
208
454
195
435
182
415
171
399
160
382
150
367
141
352
133
339
126
327
119
313
112
303
106
292
100
282
95
271
90
262
86
253
81
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
619
282
591
263
564
245
538
229
516
214
493
201
472
188
454
177
436
166
418
157
402
148
387
140
373
132
360
125
346
118
334
112
322
106
312
101
301
96
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
625
284
610
270
597
258
583
246
570
236
558
226
543
215
520
202
499
190
480
179
462
169
444
159
427
150
412
142
397
135
384
128
370
121
358
115
346
109
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
625
284
610
270
597
258
583
246
570
236
558
226
547
216
535
207
525
199
514
192
504
184
495
177
486
170
468
161
451
153
435
145
420
137
406
130
393
124
57
58
59
60
27
30K12
The black figures in the following table give the TOTAL safe
uniformly distributed load-carrying capacities, in pounds per
linear foot, of ASD K-Series Steel Joists. The weight of
DEAD loads, including the joists, must be deducted to determine the LIVE load-carrying capacities of the joists. Sloped
parallel-chord joists shall use span as defined by the length
along the slope.
The figures shown in RED in this load table are the nominal
LIVE loads per linear foot of joist which will produce an
approximate deflection of 1/360 of the span. LIVE loads
which will produce a deflection of 1/240 of the span may be
obtained by multiplying the figures in RED by 1.5. In no
case shall the TOTAL load capacity of the joists be exceeded.
ASD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (in.)
Approx. Wt
(lbs./ft.)
Span (ft.)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
8K1
10K1
12K1
12K3
12K5
14K1
14K3
14K4
14K6
16K3
16K4
16K5
16K6
16K7
10
12
12
12
14
14
14
14
16
16
16
16
16
16
16
5.1
5.0
5.0
5.7
7.1
5.2
6.0
6.7
7.7
5.5
6.3
7.0
7.5
8.1
8.6
10.0
550
550
550
510
500
425
434
344
380
282
336
234
299
197
268
167
241
142
218
123
199
106
181
93
166
81
550
550
550
510
550
463
543
428
476
351
420
291
374
245
335
207
302
177
273
153
249
132
227
116
208
101
550
550
550
510
550
463
550
434
550
396
550
366
507
317
454
269
409
230
370
198
337
172
308
150
282
132
550
550
511
475
448
390
395
324
352
272
315
230
284
197
257
170
234
147
214
128
196
113
180
100
166
88
154
79
143
70
550
550
550
507
550
467
495
404
441
339
395
287
356
246
322
212
293
184
268
160
245
141
226
124
209
110
193
98
180
88
550
550
550
507
550
467
550
443
530
397
475
336
428
287
388
248
353
215
322
188
295
165
272
145
251
129
233
115
216
103
550
550
550
507
550
467
550
443
550
408
550
383
525
347
475
299
432
259
395
226
362
199
334
175
308
156
285
139
265
124
550
550
512
488
456
409
408
347
368
297
333
255
303
222
277
194
254
170
234
150
216
133
200
119
186
106
173
95
161
86
151
78
142
71
550
550
550
526
508
456
455
386
410
330
371
285
337
247
308
216
283
189
260
167
240
148
223
132
207
118
193
106
180
96
168
87
158
79
550
550
550
526
550
490
547
452
493
386
447
333
406
289
371
252
340
221
313
195
289
173
268
155
249
138
232
124
216
112
203
101
190
92
550
550
550
526
550
490
550
455
550
426
503
373
458
323
418
282
384
248
353
219
326
194
302
173
281
155
261
139
244
126
228
114
214
103
550
550
550
526
550
490
550
455
550
426
548
405
498
351
455
307
418
269
384
238
355
211
329
188
306
168
285
151
266
137
249
124
233
112
550
550
550
526
550
490
550
455
550
426
550
406
550
385
507
339
465
298
428
263
395
233
366
208
340
186
317
167
296
151
277
137
259
124
550
550
550
526
550
490
550
455
550
426
550
406
550
385
550
363
550
346
514
311
474
276
439
246
408
220
380
198
355
178
332
161
311
147
550
550
550
550
550
480
532
377
444
288
377
225
324
179
281
145
246
119
550
550
550
542
550
455
479
363
412
289
358
234
313
192
277
159
246
134
221
113
199
97
29
30
31
32
28
16K2
16K9
ASD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
Span (ft.)
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
18K3
18K4
18K5
18K6
18K7
18K9 18K10
20K3
20K4
20K5
20K6
20K7
20K9
20K10
22K4
22K5
22K6
22K7
18
18
18
18
18
18
18
20
20
20
20
20
20
20
22
22
22
22
22
22
22
6.6
7.2
7.7
8.5
10.2
11.7
6.7
7.6
8.2
8.9
9.3
10.8
12.2
8.8
9.2
9.7
11.3
12.6
13.8
550
550
514
494
463
423
420
364
382
316
349
276
320
242
294
214
272
190
252
169
234
151
218
136
203
123
190
111
178
101
168
92
158
84
149
77
141
70
550
550
550
523
550
490
506
426
460
370
420
323
385
284
355
250
328
222
303
198
282
177
263
159
245
144
229
130
215
118
202
108
190
98
179
90
169
82
550
550
550
523
550
490
550
460
518
414
473
362
434
318
400
281
369
249
342
222
318
199
296
179
276
161
258
146
242
132
228
121
214
110
202
101
191
92
550
550
550
523
550
490
550
460
550
438
516
393
473
345
435
305
402
271
372
241
346
216
322
194
301
175
281
158
264
144
248
131
233
120
220
110
208
101
550
550
550
523
550
490
550
460
550
438
550
418
526
382
485
337
448
299
415
267
385
239
359
215
335
194
313
175
294
159
276
145
260
132
245
121
232
111
550
550
550
523
550
490
550
460
550
438
550
418
550
396
550
377
538
354
498
315
463
282
431
254
402
229
376
207
353
188
332
171
312
156
294
143
278
132
550
550
550
523
550
490
550
460
550
438
550
418
550
396
550
377
550
361
550
347
548
331
511
298
477
269
446
243
418
221
393
201
370
184
349
168
330
154
517
517
468
453
426
393
389
344
357
302
329
266
304
236
281
211
261
189
243
170
227
153
212
138
199
126
187
114
176
105
166
96
157
88
148
81
141
74
133
69
127
64
550
550
550
520
514
461
469
402
430
353
396
312
366
277
339
247
315
221
293
199
274
179
256
162
240
147
226
134
212
122
200
112
189
103
179
95
170
87
161
81
153
75
550
550
550
520
550
490
529
451
485
396
446
350
412
310
382
277
355
248
330
223
308
201
289
182
271
165
254
150
239
137
226
126
213
115
202
106
191
98
181
90
172
84
550
550
550
520
550
490
550
468
528
430
486
380
449
337
416
301
386
269
360
242
336
218
314
198
295
179
277
163
261
149
246
137
232
125
220
115
208
106
198
98
188
91
550
550
550
520
550
490
550
468
550
448
541
421
500
373
463
333
430
298
401
268
374
242
350
219
328
199
309
181
290
165
274
151
259
139
245
128
232
118
220
109
209
101
550
550
550
520
550
490
550
468
550
448
550
426
550
405
550
389
517
353
482
317
450
286
421
259
395
235
371
214
349
195
329
179
311
164
294
151
279
139
265
129
251
119
550
550
550
520
550
490
550
468
550
448
550
426
550
405
550
389
550
375
550
359
533
336
499
304
468
276
440
251
414
229
390
210
369
193
349
178
331
164
314
151
298
140
550
548
518
491
475
431
438
381
404
338
374
301
348
270
324
242
302
219
283
198
265
180
249
164
235
149
221
137
209
126
198
116
187
107
178
98
169
91
161
85
153
79
146
73
139
68
550
548
550
518
536
483
493
427
455
379
422
337
392
302
365
272
341
245
319
222
299
201
281
183
265
167
249
153
236
141
223
130
211
119
200
110
190
102
181
95
173
88
165
82
157
76
550
548
550
518
550
495
537
464
496
411
459
367
427
328
398
295
371
266
347
241
326
219
306
199
288
182
272
167
257
153
243
141
230
130
218
120
207
111
197
103
188
96
179
89
171
83
550
548
550
518
550
495
550
474
550
454
512
406
475
364
443
327
413
295
387
267
363
242
341
221
321
202
303
185
286
169
271
156
256
144
243
133
231
123
220
114
209
106
200
99
191
92
550
548
550
518
550
495
550
474
550
454
550
432
550
413
532
387
497
349
465
316
436
287
410
261
386
239
364
219
344
201
325
185
308
170
292
157
278
146
264
135
252
126
240
117
229
109
550
548
550
518
550
495
550
474
550
454
550
432
550
413
550
399
550
385
550
369
517
337
486
307
458
280
432
257
408
236
386
217
366
200
347
185
330
171
314
159
299
148
285
138
272
128
550
548
550
518
550
495
550
474
550
454
550
432
550
413
550
399
550
385
550
369
549
355
532
334
516
314
494
292
467
269
442
247
419
228
397
211
377
195
359
181
342
168
326
157
311
146
41
42
43
44
29
ASD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
Span (ft.)
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
24K4
24K5
24K6
24K7
24K8
24K9
24K10
24K12
26K5
26K6
26K7
26K8
26K9
26K10
26K12
24
24
24
24
24
24
24
24
26
26
26
26
26
26
26
8.4
9.3
9.7
10.1
11.5
12.0
13.1
16.0
9.8
10.6
10.9
12.1
12.2
13.8
16.6
520
516
479
456
442
405
410
361
381
323
354
290
331
262
310
237
290
215
273
196
257
179
242
164
229
150
216
138
205
128
195
118
185
109
176
101
168
94
160
88
153
82
146
76
139
71
133
67
128
63
550
544
540
511
499
453
462
404
429
362
400
325
373
293
349
266
327
241
308
220
290
201
273
184
258
169
244
155
231
143
219
132
208
122
198
114
189
106
180
98
172
92
164
86
157
80
150
75
144
70
550
544
550
520
543
493
503
439
467
393
435
354
406
319
380
289
357
262
335
239
315
218
297
200
281
183
266
169
252
156
239
144
227
133
216
124
206
115
196
107
187
100
179
93
171
87
164
82
157
77
550
544
550
520
550
499
550
479
521
436
485
392
453
353
424
320
397
290
373
265
351
242
331
221
313
203
296
187
281
172
266
159
253
148
241
137
229
127
219
118
209
110
199
103
191
97
183
90
175
85
550
544
550
520
550
499
550
479
550
456
536
429
500
387
468
350
439
318
413
289
388
264
366
242
346
222
327
205
310
189
294
174
280
161
266
150
253
139
242
130
231
121
220
113
211
106
202
99
194
93
550
544
550
520
550
499
550
479
550
456
550
436
544
419
510
379
478
344
449
313
423
286
399
262
377
241
356
222
338
204
320
189
304
175
290
162
276
151
263
140
251
131
240
122
230
114
220
107
211
101
550
544
550
520
550
499
550
479
550
456
550
436
550
422
550
410
549
393
532
368
502
337
473
308
447
283
423
260
401
240
380
222
361
206
344
191
327
177
312
165
298
154
285
144
272
135
261
126
250
118
550
544
550
520
550
499
550
479
550
456
550
436
550
422
550
410
549
393
532
368
516
344
501
324
487
306
474
290
461
275
449
261
438
247
427
235
417
224
406
213
387
199
370
185
354
174
339
163
325
153
542
535
502
477
466
427
434
384
405
346
379
314
356
285
334
259
315
237
297
217
280
199
265
183
251
169
238
156
227
145
215
134
205
125
196
116
187
108
179
101
171
95
164
89
157
83
150
78
144
73
139
69
133
65
550
541
547
519
508
464
473
417
441
377
413
341
387
309
364
282
343
257
323
236
305
216
289
199
274
184
260
170
247
157
235
146
224
136
213
126
204
118
194
110
186
103
178
96
171
90
164
85
157
80
151
75
145
71
550
541
550
522
550
501
527
463
492
417
460
378
432
343
406
312
382
285
360
261
340
240
322
221
305
204
289
188
275
174
262
162
249
150
238
140
227
131
217
122
207
114
199
107
190
100
183
94
175
89
168
83
162
79
550
541
550
522
550
501
550
479
544
457
509
413
477
375
448
342
422
312
398
286
376
263
356
242
337
223
320
206
304
191
289
177
275
164
263
153
251
143
240
133
229
125
219
117
210
110
202
103
194
97
186
91
179
86
550
541
550
522
550
501
550
479
550
459
550
444
519
407
488
370
459
338
433
310
409
284
387
262
367
241
348
223
331
207
315
192
300
178
286
166
273
155
261
145
250
135
239
127
229
119
220
112
211
105
203
99
195
93
550
541
550
522
550
501
550
479
550
459
550
444
549
431
532
404
516
378
501
356
486
334
460
308
436
284
413
262
393
243
374
225
356
210
339
195
324
182
310
170
296
159
284
149
272
140
261
131
250
124
241
116
231
110
550
541
550
522
550
501
550
479
550
459
550
444
549
431
532
404
516
378
501
356
487
334
474
315
461
299
449
283
438
269
427
256
417
244
407
232
398
222
389
212
380
203
369
192
353
180
339
169
325
159
313
150
301
142
49
50
51
52
30
ASD
STANDARD LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs./ft.)
Span (ft.)
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
28K6
28K7
28K8
28K9
28K10
28K12
30K7
30K8
30K9
30K10
30K11
28
28
28
28
28
28
30
30
30
30
30
30
11.4
11.8
12.7
13.0
14.3
17.1
12.3
13.2
13.4
15.0
16.4
17.6
548
541
511
486
477
439
446
397
418
361
393
329
370
300
349
275
330
252
312
232
296
214
280
198
266
183
253
170
241
158
230
147
220
137
210
128
201
120
192
112
184
105
177
99
170
93
163
88
157
83
151
78
145
74
140
70
135
66
550
543
550
522
531
486
497
440
466
400
438
364
412
333
389
305
367
280
348
257
329
237
313
219
297
203
283
189
269
175
257
163
245
152
234
142
224
133
214
125
206
117
197
110
189
103
182
97
175
92
168
87
162
82
156
77
151
73
550
543
550
522
550
500
550
480
515
438
484
399
456
364
430
333
406
306
384
282
364
260
346
240
328
222
312
206
297
192
284
179
271
167
259
156
248
146
237
136
227
128
218
120
209
113
201
106
193
100
186
95
179
89
173
85
166
80
550
543
550
522
550
500
550
480
549
463
527
432
496
395
468
361
442
332
418
305
396
282
376
260
357
241
340
224
324
208
309
194
295
181
282
169
270
158
258
148
247
139
237
130
228
123
219
115
210
109
203
103
195
97
188
92
181
87
550
543
550
522
550
500
550
480
549
463
532
435
516
410
501
389
487
366
474
344
461
325
447
306
424
284
404
263
384
245
367
228
350
212
334
198
320
186
306
174
294
163
282
153
270
144
260
136
250
128
240
121
232
114
223
108
215
102
550
543
550
522
550
500
550
480
549
463
532
435
516
410
501
389
487
366
474
344
461
325
449
308
438
291
427
277
417
264
407
252
398
240
389
229
380
219
372
210
365
201
357
193
350
185
338
175
325
165
313
156
301
147
290
139
280
132
550
543
534
508
501
461
471
420
443
384
418
351
395
323
373
297
354
274
336
253
319
234
303
217
289
202
276
188
263
176
251
164
241
153
230
144
221
135
212
127
203
119
195
112
188
106
181
100
174
94
168
89
162
84
156
80
151
76
146
72
141
69
550
543
550
520
549
500
520
460
490
420
462
384
436
353
413
325
391
300
371
277
353
256
335
238
320
221
305
206
291
192
278
179
266
168
255
157
244
148
234
139
225
130
216
123
208
116
200
109
192
103
185
98
179
92
173
88
167
83
161
79
156
75
550
543
550
520
549
500
532
468
516
441
501
415
475
383
449
352
426
325
404
300
384
278
365
258
348
240
332
223
317
208
303
195
290
182
277
171
266
160
255
150
245
141
235
133
226
126
218
119
209
112
202
106
195
100
188
95
181
90
175
86
169
81
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
413
282
394
263
376
245
359
229
344
214
329
201
315
188
303
177
291
166
279
157
268
148
258
140
249
132
240
125
231
118
223
112
215
106
208
101
201
96
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
417
284
407
270
398
258
389
246
380
236
372
226
362
215
347
202
333
190
320
179
308
169
296
159
285
150
275
142
265
135
256
128
247
121
239
115
231
109
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
417
284
407
270
398
258
389
246
380
236
372
226
365
216
357
207
350
199
343
192
336
184
330
177
324
170
312
161
301
153
290
145
280
137
271
130
262
124
57
58
59
60
31
30K12
DEFINITION OF SPAN
(Metric Units)
CL
SPAN
BEARING LENGTH
BEARING LENGTH
CL
SPAN
BEARING LENGTH
BEARING LENGTH
SPAN
BEARING LENGTH
BEARING LENGTH
32
SEAT
DEPTH
CL
The black figures in the following table give the TOTAL safe
factored uniformly distributed load-carrying capacities, in
kiloNewtons per meter (kN/m) of LRFD K-Series Steel
Joists. The weight (kN/m) of the factored DEAD loads,
including the joists, must be deducted to determine the factored LIVE load-carrying capacities of the joists. Sloped parallel-chord joists shall use span as defined by the length
along the slope.
The figures shown RED in this load table are the unfactored
nominal LIVE loads per linear meter of joist which will produce
an approximate deflection of L/360 of the span. LIVE loads
which produce a deflection of L/240 of the span may be
obtained by multiplying the figures in RED by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
Where the joist span exceeds the unshaded area of the Load
Table, the row of bridging nearest the mid span shall be diagonal
bridging with bolted connections at the chords and intersections.
LRFD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS K-SERIES
Based on a Maximum 345 MPa Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
Span (mm)
2438
2743
3048
3353
3658
3962
4267
4572
4877
5182
5486
5791
6096
6401
6706
7010
7315
7620
7925
8230
8534
8K1
10K1
12K1
12K3
12K5
14K1
14K3
14K4
14K6
16K2
16K3
16K4
16K5
16K6
16K7
203
254
305
305
305
356
356
356
356
406
406
406
406
406
406
406
7.6
7.4
7.4
8.5
10.6
7.7
8.9
10.0
11.5
8.2
9.4
10.4
11.2
12.1
12.8
14.9
0.07
0.07
0.07
0.08
0.10
0.08
0.09
0.10
0.11
0.08
0.09
0.10
0.11
0.12
0.13
0.15
12.03
8.02
12.03
7.44
10.94
6.20
9.50
5.02
8.31
4.11
7.35
3.41
6.54
2.87
5.86
2.43
5.27
2.07
4.77
1.79
4.35
1.54
3.96
1.35
3.63
1.18
12.03
8.02
12.03
7.44
12.03
6.75
11.88
6.24
10.42
5.12
9.19
4.24
8.18
3.57
7.33
3.02
6.61
2.58
5.97
2.23
5.45
1.92
4.96
1.69
4.55
1.47
12.03
8.02
12.03
7.44
12.03
6.75
12.03
6.33
12.03
5.77
12.03
5.34
11.09
4.62
9.93
3.92
8.95
3.35
8.09
2.88
7.37
2.51
6.74
2.18
6.17
1.92
12.03
8.02
11.18
6.93
9.80
5.69
8.64
4.72
7.70
3.96
6.89
3.35
6.21
2.87
5.62
2.48
5.12
2.14
4.68
1.86
4.29
1.64
3.94
1.45
3.63
1.28
3.37
1.15
3.13
1.02
12.03
8.02
12.03
7.39
12.03
6.81
10.83
5.89
9.65
4.94
8.64
4.18
7.79
3.59
7.04
3.09
6.41
2.68
5.86
2.33
5.36
2.05
4.94
1.80
4.57
1.60
4.22
1.43
3.94
1.28
12.03
8.02
12.03
7.39
12.03
6.81
12.03
6.46
11.60
5.79
10.39
4.90
9.36
4.18
8.49
3.61
7.72
3.13
7.04
2.74
6.45
2.40
5.95
2.11
5.49
1.88
5.10
1.67
4.72
1.50
12.03
8.02
12.03
7.39
12.03
6.81
12.03
6.46
12.03
5.95
12.03
5.58
11.49
5.06
10.39
4.36
9.45
3.77
8.64
3.29
7.92
2.90
7.31
2.55
6.74
2.27
6.23
2.02
5.80
1.80
12.03
8.02
11.20
7.12
9.98
5.96
8.93
5.06
8.05
4.33
7.28
3.72
6.63
3.23
6.06
2.83
5.56
2.48
5.12
2.18
4.72
1.94
4.37
1.73
4.07
1.54
3.78
1.38
3.52
1.25
3.30
1.13
3.10
1.03
12.03
8.02
12.03
7.67
11.12
6.65
9.96
5.63
8.97
4.81
8.12
4.15
7.37
3.60
6.74
3.15
6.19
2.75
5.69
2.43
5.25
2.15
4.88
1.92
4.53
1.72
4.22
1.54
3.94
1.40
3.67
1.26
3.45
1.15
12.03
8.02
12.03
7.67
12.03
7.15
11.97
6.59
10.79
5.63
9.78
4.85
8.88
4.21
8.12
3.67
7.44
3.22
6.85
2.84
6.32
2.52
5.86
2.26
5.45
2.01
5.07
1.80
4.72
1.63
4.44
1.47
4.15
1.34
12.03
8.02
12.03
7.67
12.03
7.15
12.03
6.64
12.03
6.21
11.01
5.44
10.02
4.71
9.15
4.11
8.40
3.61
7.72
3.19
7.13
2.83
6.61
2.52
6.15
2.26
5.71
2.02
5.34
1.83
4.99
1.66
4.68
1.50
12.03
8.02
12.03
7.67
12.03
7.15
12.03
6.64
12.03
6.21
11.99
5.91
10.90
5.12
9.96
4.48
9.15
3.92
8.40
3.47
7.77
3.07
7.20
2.74
6.69
2.45
6.23
2.20
5.82
1.99
5.45
1.80
5.10
1.63
12.03
8.02
12.03
7.67
12.03
7.15
12.03
6.64
12.03
6.21
12.03
5.92
12.03
5.61
11.09
4.94
10.17
4.34
9.36
3.83
8.64
3.40
8.01
3.03
7.44
2.71
6.93
2.43
6.47
2.20
6.06
1.99
5.66
1.80
12.03
8.02
12.03
7.67
12.03
7.15
12.03
6.64
12.03
6.21
12.03
5.92
12.03
5.61
12.03
5.29
12.03
5.04
11.25
4.53
10.37
4.02
9.61
3.59
8.93
3.21
8.31
2.88
7.77
2.59
7.26
2.34
6.80
2.14
12.03
8.02
12.03
8.02
12.03
7.00
11.64
5.50
9.71
4.20
8.25
3.28
7.09
2.61
6.15
2.11
5.38
1.73
12.03
8.02
12.03
7.90
12.03
6.64
10.48
5.29
9.01
4.21
7.83
3.41
6.85
2.80
6.06
2.32
5.38
1.95
4.83
1.64
4.35
1.41
8839
9144
9449
9754
33
16K9
LRFD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a Maximum 345 MPa Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth(mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
457
457
457
457
457
457
457
508
508
508
508
20K7 20K9 20K10 22K4 22K5 22K6 22K7 22K9 22K10 22K11
508
508
508
559
559
559
559
559
559
559
9.8
10.7
11.5
12.6
13.4
15.2
17.4
10.0
11.3
12.2
13.2
13.8
16.1
18.2
11.9
13.1
13.7
14.4
16.8
18.8
20.5
0.10
0.11
0.11
0.12
0.13
0.15
0.17
0.10
0.11
0.12
0.13
0.14
0.16
0.18
0.12
0.13
0.13
0.14
0.16
0.18
0.20
12.03
8.02
11.25
7.20
10.13
6.17
9.19
5.31
8.36
4.61
7.63
4.02
7.00
3.53
6.43
3.12
5.95
2.77
5.51
2.46
5.12
2.20
4.77
1.98
4.44
1.79
4.15
1.61
3.89
1.47
3.67
1.34
3.45
1.22
3.26
1.12
3.08
1.02
12.03
8.02
12.03
7.63
12.03
7.15
11.07
6.21
10.06
5.39
9.19
4.71
8.42
4.14
7.77
3.64
7.18
3.23
6.63
2.88
6.17
2.58
5.75
2.32
5.36
2.10
5.01
1.89
4.70
1.72
4.42
1.57
4.15
1.43
3.91
1.31
3.69
1.19
12.03
8.02
12.03
7.63
12.03
7.15
12.03
6.71
11.33
6.04
10.35
5.28
9.50
4.64
8.75
4.10
8.07
3.63
7.48
3.23
6.96
2.90
6.47
2.61
6.04
2.34
5.64
2.13
5.29
1.92
4.99
1.76
4.68
1.60
4.42
1.47
4.18
1.34
12.03
8.02
12.03
7.63
12.03
7.15
12.03
6.71
12.03
6.39
11.29
5.73
10.35
5.03
9.52
4.45
8.80
3.95
8.14
3.51
7.57
3.15
7.04
2.83
6.58
2.55
6.15
2.30
5.77
2.10
5.42
1.91
5.10
1.75
4.81
1.60
4.55
1.47
12.03
8.02
12.03
7.63
12.03
7.15
12.03
6.71
12.03
6.39
12.03
6.10
11.51
5.57
10.61
4.91
9.80
4.36
9.08
3.89
8.42
3.48
7.85
3.13
7.33
2.83
6.85
2.55
6.43
2.32
6.04
2.11
5.69
1.92
5.36
1.76
5.07
1.61
12.03
8.02
12.03
7.63
12.03
7.15
12.03
6.71
12.03
6.39
12.03
6.10
12.03
5.77
12.03
5.50
11.77
5.16
10.90
4.59
10.13
4.11
9.43
3.70
8.80
3.34
8.23
3.02
7.72
2.74
7.26
2.49
6.82
2.27
6.43
2.08
6.08
1.92
12.03
8.02
12.03
7.63
12.03
7.15
12.03
6.71
12.03
6.39
12.03
6.10
12.03
5.77
12.03
5.50
12.03
5.26
12.03
5.06
11.99
4.83
11.18
4.34
10.44
3.92
9.76
3.54
9.15
3.22
8.60
2.93
8.09
2.68
7.63
2.45
7.22
2.24
11.31
7.54
10.24
6.61
9.32
5.73
8.51
5.02
7.81
4.40
7.20
3.88
6.65
3.44
6.15
3.07
5.71
2.75
5.31
2.48
4.96
2.23
4.64
2.01
4.35
1.83
4.09
1.66
3.85
1.53
3.63
1.40
3.43
1.28
3.23
1.18
3.08
1.07
2.91
1.00
2.78
0.93
12.03
8.02
12.03
7.58
11.25
6.72
10.26
5.86
9.41
5.15
8.66
4.55
8.01
4.04
7.42
3.60
6.89
3.22
6.41
2.90
5.99
2.61
5.60
2.36
5.25
2.14
4.94
1.95
4.64
1.78
4.37
1.63
4.13
1.50
3.91
1.38
3.72
1.26
3.52
1.18
3.34
1.09
12.03
8.02
12.03
7.58
12.03
7.15
11.58
6.58
10.61
5.77
9.76
5.10
9.01
4.52
8.36
4.04
7.77
3.61
7.22
3.25
6.74
2.93
6.32
2.65
5.93
2.40
5.56
2.18
5.23
1.99
4.94
1.83
4.66
1.67
4.42
1.54
4.18
1.43
3.96
1.31
3.76
1.22
12.03
8.02
12.03
7.58
12.03
7.15
12.03
6.82
11.55
6.27
10.63
5.54
9.82
4.91
9.10
4.39
8.44
3.92
7.88
3.53
7.35
3.18
6.87
2.88
6.45
2.61
6.06
2.37
5.71
2.17
5.38
1.99
5.07
1.82
4.81
1.67
4.55
1.54
4.33
1.43
4.11
1.32
12.03
8.02
12.03
7.58
12.03
7.15
12.03
6.82
12.03
6.53
11.84
6.14
10.94
5.44
10.13
4.85
9.41
4.34
8.77
3.91
8.18
3.53
7.66
3.19
7.18
2.90
6.76
2.64
6.34
2.40
5.99
2.20
5.66
2.02
5.36
1.86
5.07
1.72
4.81
1.59
4.57
1.47
12.03
8.02
12.03
7.58
12.03
7.15
12.03
6.82
12.03
6.53
12.03
6.21
12.03
5.91
12.03
5.67
11.31
5.15
10.55
4.62
9.85
4.17
9.21
3.77
8.64
3.42
8.12
3.12
7.63
2.84
7.20
2.61
6.80
2.39
6.43
2.20
6.10
2.02
5.80
1.88
5.49
1.73
12.03
8.02
12.03
7.58
12.03
7.15
12.03
6.82
12.03
6.53
12.03
6.21
12.03
5.91
12.03
5.67
12.03
5.47
12.03
5.23
11.66
4.90
10.92
4.43
10.24
4.02
9.63
3.66
9.06
3.34
8.53
3.06
8.07
2.81
7.63
2.59
7.24
2.39
6.87
2.20
6.52
2.04
12.03
7.99
11.33
7.16
10.39
6.28
9.58
5.56
8.84
4.93
8.18
4.39
7.61
3.94
7.09
3.53
6.61
3.19
6.19
2.88
5.80
2.62
5.45
2.39
5.14
2.17
4.83
1.99
4.57
1.83
4.33
1.69
4.09
1.56
3.89
1.43
3.69
1.32
3.52
1.24
3.34
1.15
3.19
1.06
3.04
0.99
12.03
7.99
12.03
7.55
11.73
7.04
10.79
6.23
9.96
5.53
9.23
4.91
8.58
4.40
7.99
3.96
7.46
3.57
6.98
3.23
6.54
2.93
6.15
2.67
5.80
2.43
5.45
2.23
5.16
2.05
4.88
1.89
4.61
1.73
4.37
1.60
4.15
1.48
3.96
1.38
3.78
1.28
3.61
1.19
3.43
1.10
12.03
7.99
12.03
7.55
12.03
7.22
11.75
6.77
10.85
5.99
10.04
5.35
9.34
4.78
8.71
4.30
8.12
3.88
7.59
3.51
7.13
3.19
6.69
2.90
6.30
2.65
5.95
2.43
5.62
2.23
5.31
2.05
5.03
1.89
4.77
1.75
4.53
1.61
4.31
1.50
4.11
1.40
3.91
1.29
3.74
1.21
12.03
7.99
12.03
7.55
12.03
7.22
12.03
6.91
12.03
6.62
11.20
5.92
10.39
5.31
9.69
4.77
9.04
4.30
8.47
3.89
7.94
3.53
7.46
3.22
7.02
2.94
6.63
2.69
6.26
2.46
5.93
2.27
5.60
2.10
5.31
1.94
5.05
1.79
4.81
1.66
4.57
1.54
4.37
1.44
4.18
1.34
12.03
7.99
12.03
7.55
12.03
7.22
12.03
6.91
12.03
6.62
12.03
6.30
12.03
6.02
11.64
5.64
10.87
5.09
10.17
4.61
9.54
4.18
8.97
3.80
8.44
3.48
7.96
3.19
7.53
2.93
7.11
2.69
6.74
2.48
6.39
2.29
6.08
2.13
5.77
1.97
5.51
1.83
5.25
1.70
5.01
1.59
12.03
7.99
12.03
7.55
12.03
7.22
12.03
6.91
12.03
6.62
12.03
6.30
12.03
6.02
12.03
5.82
12.03
5.61
12.03
5.38
11.31
4.91
10.63
4.48
10.02
4.08
9.45
3.75
8.93
3.44
8.44
3.16
8.01
2.91
7.59
2.69
7.22
2.49
6.87
2.32
6.54
2.15
6.23
2.01
5.95
1.86
12.03
7.99
12.03
7.55
12.03
7.22
12.03
6.91
12.03
6.62
12.03
6.30
12.03
6.02
12.03
5.82
12.03
5.61
12.03
5.38
12.01
5.18
11.64
4.87
11.29
4.58
10.81
4.26
10.22
3.92
9.67
3.60
9.17
3.32
8.69
3.07
8.25
2.84
7.85
2.64
7.48
2.45
7.13
2.29
6.80
2.13
Span (mm)
5486
5791
6096
6401
6706
7010
7315
7620
7925
8230
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
34
LRFD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a Maximum 345 MPa Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
24K4
24K5
24K6
24K7
24K8
24K9
24K10
24K12
26K5
26K6
26K7
26K8
26K9
26K10
610
610
610
610
610
610
610
610
660
660
660
660
660
660
26K12
660
12.5
13.8
14.4
15.0
17.1
17.9
19.5
23.8
14.6
15.8
16.2
18.0
18.2
20.5
24.7
0.12
0.14
0.14
0.15
0.17
0.18
0.19
0.23
0.14
0.15
0.16
0.18
0.18
0.20
0.24
11.38
7.53
10.48
6.65
9.67
5.91
8.97
5.26
8.34
4.71
7.74
4.23
7.24
3.82
6.78
3.45
6.34
3.13
5.97
2.86
5.62
2.61
5.29
2.39
5.01
2.18
4.72
2.01
4.48
1.86
4.26
1.72
4.04
1.59
3.85
1.47
3.67
1.37
3.50
1.28
3.34
1.19
3.19
1.10
3.04
1.03
2.91
0.97
2.80
0.91
12.03
7.93
11.82
7.45
10.92
6.61
10.11
5.89
9.39
5.28
8.75
4.74
8.16
4.27
7.63
3.88
7.15
3.51
6.74
3.21
6.34
2.93
5.97
2.68
5.64
2.46
5.34
2.26
5.05
2.08
4.79
1.92
4.55
1.78
4.33
1.66
4.13
1.54
3.94
1.43
3.76
1.34
3.59
1.25
3.43
1.16
3.28
1.09
3.15
1.02
12.03
7.93
12.03
7.58
11.88
7.19
11.01
6.40
10.22
5.73
9.52
5.16
8.88
4.65
8.31
4.21
7.81
3.82
7.33
3.48
6.89
3.18
6.50
2.91
6.15
2.67
5.82
2.46
5.51
2.27
5.23
2.10
4.96
1.94
4.72
1.80
4.50
1.67
4.29
1.56
4.09
1.45
3.91
1.35
3.74
1.26
3.59
1.19
3.43
1.12
12.03
7.93
12.03
7.58
12.03
7.28
12.03
6.99
11.40
6.36
10.61
5.72
9.91
5.15
9.28
4.67
8.69
4.23
8.16
3.86
7.68
3.53
7.24
3.22
6.85
2.96
6.47
2.72
6.15
2.51
5.82
2.32
5.53
2.15
5.27
1.99
5.01
1.85
4.79
1.72
4.57
1.60
4.35
1.50
4.18
1.41
4.00
1.31
3.83
1.24
12.03
7.93
12.03
7.58
12.03
7.28
12.03
6.99
12.03
6.65
11.73
6.26
10.94
5.64
10.24
5.10
9.61
4.64
9.04
4.21
8.49
3.85
8.01
3.53
7.57
3.23
7.15
2.99
6.78
2.75
6.43
2.53
6.12
2.34
5.82
2.18
5.53
2.02
5.29
1.89
5.05
1.76
4.81
1.64
4.61
1.54
4.42
1.44
4.24
1.35
12.03
7.93
12.03
7.58
12.03
7.28
12.03
6.99
12.03
6.65
12.03
6.36
11.90
6.11
11.16
5.53
10.46
5.02
9.82
4.56
9.25
4.17
8.73
3.82
8.25
3.51
7.79
3.23
7.39
2.97
7.00
2.75
6.65
2.55
6.34
2.36
6.04
2.20
5.75
2.04
5.49
1.91
5.25
1.78
5.03
1.66
4.81
1.56
4.61
1.47
12.03
7.93
12.03
7.58
12.03
7.28
12.03
6.99
12.03
6.65
12.03
6.36
12.03
6.15
12.03
5.98
12.01
5.73
11.64
5.37
10.98
4.91
10.35
4.49
9.78
4.13
9.25
3.79
8.77
3.50
8.31
3.23
7.90
3.00
7.53
2.78
7.15
2.58
6.82
2.40
6.52
2.24
6.23
2.10
5.95
1.97
5.71
1.83
5.47
1.72
12.03
7.93
12.03
7.58
12.03
7.28
12.03
6.99
12.03
6.65
12.03
6.36
12.03
6.15
12.03
5.98
12.01
5.73
11.64
5.37
11.29
5.02
10.96
4.72
10.66
4.46
10.37
4.23
10.09
4.01
9.82
3.80
9.58
3.60
9.34
3.42
9.12
3.26
8.88
3.10
8.47
2.90
8.09
2.69
7.74
2.53
7.42
2.37
7.11
2.23
11.86
7.80
10.98
6.96
10.20
6.23
9.50
5.60
8.86
5.04
8.29
4.58
7.79
4.15
7.31
3.77
6.89
3.45
6.50
3.16
6.12
2.90
5.80
2.67
5.49
2.46
5.21
2.27
4.96
2.11
4.70
1.95
4.48
1.82
4.29
1.69
4.09
1.57
3.91
1.47
3.74
1.38
3.59
1.29
3.43
1.21
3.28
1.13
3.15
1.06
3.04
1.00
2.91
0.94
12.03
7.89
11.97
7.57
11.12
6.77
10.35
6.08
9.65
5.50
9.04
4.97
8.47
4.50
7.96
4.11
7.50
3.75
7.07
3.44
6.67
3.15
6.32
2.90
5.99
2.68
5.69
2.48
5.40
2.29
5.14
2.13
4.90
1.98
4.66
1.83
4.46
1.72
4.24
1.60
4.07
1.50
3.89
1.40
3.74
1.31
3.59
1.24
3.43
1.16
3.30
1.09
3.17
1.03
12.03
7.89
12.03
7.61
12.03
7.31
11.53
6.75
10.77
6.08
10.06
5.51
9.45
5.00
8.88
4.55
8.36
4.15
7.88
3.80
7.44
3.50
7.04
3.22
6.67
2.97
6.32
2.74
6.01
2.53
5.73
2.36
5.45
2.18
5.21
2.04
4.96
1.91
4.75
1.78
4.53
1.66
4.35
1.56
4.15
1.45
4.00
1.37
3.83
1.29
3.67
1.21
3.54
1.15
12.03
7.89
12.03
7.61
12.03
7.31
12.03
6.99
11.90
6.66
11.14
6.02
10.44
5.47
9.80
4.99
9.23
4.55
8.71
4.17
8.23
3.83
7.79
3.53
7.37
3.25
7.00
3.00
6.65
2.78
6.32
2.58
6.01
2.39
5.75
2.23
5.49
2.08
5.25
1.94
5.01
1.82
4.79
1.70
4.59
1.60
4.42
1.50
4.24
1.41
4.07
1.32
3.91
1.25
12.03
7.89
12.03
7.61
12.03
7.31
12.03
6.99
12.03
6.69
12.03
6.47
11.36
5.93
10.68
5.39
10.04
4.93
9.47
4.52
8.95
4.14
8.47
3.82
8.03
3.51
7.61
3.25
7.24
3.02
6.89
2.80
6.56
2.59
6.26
2.42
5.97
2.26
5.71
2.11
5.47
1.97
5.23
1.85
5.01
1.73
4.81
1.63
4.61
1.53
4.44
1.44
4.26
1.35
12.03
7.89
12.03
7.61
12.03
7.31
12.03
6.99
12.03
6.69
12.03
6.47
12.01
6.28
11.64
5.89
11.29
5.51
10.96
5.19
10.63
4.87
10.06
4.49
9.54
4.14
9.04
3.82
8.60
3.54
8.18
3.28
7.79
3.06
7.42
2.84
7.09
2.65
6.78
2.48
6.47
2.32
6.21
2.17
5.95
2.04
5.71
1.91
5.47
1.80
5.27
1.69
5.05
1.60
12.03
7.89
12.03
7.61
12.03
7.31
12.03
6.99
12.03
6.69
12.03
6.47
12.01
6.28
11.64
5.89
11.29
5.51
10.96
5.19
10.66
4.87
10.37
4.59
10.09
4.36
9.82
4.13
9.58
3.92
9.34
3.73
9.12
3.56
8.90
3.38
8.71
3.23
8.51
3.09
8.31
2.96
8.07
2.80
7.72
2.62
7.42
2.46
7.11
2.32
6.85
2.18
6.58
2.07
Span (mm)
7315
7620
7925
8230
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
13716
14021
14326
14630
14935
15240
15545
15850
35
LRFD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a Maximum 345 MPa Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
Span (mm)
28K6
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
13716
14021
14326
14630
14935
15240
15545
15850
16154
16459
16764
17069
28K7
28K8
28K9
28K10
28K12
30K7
30K8
30K9
30K10
30K11
30K12
711
711
711
711
711
711
762
762
762
762
762
762
17.0
17.6
18.9
19.3
21.3
25.4
18.3
19.6
19.9
22.3
24.4
26.2
0.17
0.17
0.19
0.19
0.21
0.25
0.18
0.19
0.20
0.22
0.24
0.26
11.99
7.89
11.18
7.09
10.44
6.40
9.76
5.79
9.15
5.26
8.60
4.80
8.09
4.37
7.63
4.01
7.22
3.67
6.82
3.38
6.47
3.12
6.12
2.88
5.82
2.67
5.53
2.48
5.27
2.30
5.03
2.14
4.81
1.99
4.59
1.86
4.40
1.75
4.20
1.63
4.02
1.53
3.87
1.44
3.72
1.35
3.56
1.28
3.43
1.21
3.30
1.13
3.17
1.07
3.06
1.02
2.95
0.96
12.03
7.92
12.03
7.61
11.62
7.09
10.87
6.42
10.20
5.83
9.58
5.31
9.01
4.85
8.51
4.45
8.03
4.08
7.61
3.75
7.20
3.45
6.85
3.19
6.50
2.96
6.19
2.75
5.88
2.55
5.62
2.37
5.36
2.21
5.12
2.07
4.90
1.94
4.68
1.82
4.50
1.70
4.31
1.60
4.13
1.50
3.98
1.41
3.83
1.34
3.67
1.26
3.54
1.19
3.41
1.12
3.30
1.06
12.03
7.92
12.03
7.61
12.03
7.29
12.03
7.00
11.27
6.39
10.59
5.82
9.98
5.31
9.41
4.85
8.88
4.46
8.40
4.11
7.96
3.79
7.57
3.50
7.18
3.23
6.82
3.00
6.50
2.80
6.21
2.61
5.93
2.43
5.66
2.27
5.42
2.13
5.18
1.98
4.96
1.86
4.77
1.75
4.57
1.64
4.40
1.54
4.22
1.45
4.07
1.38
3.91
1.29
3.78
1.24
3.63
1.16
12.03
7.92
12.03
7.61
12.03
7.29
12.03
7.00
12.01
6.75
11.53
6.30
10.85
5.76
10.24
5.26
9.67
4.84
9.15
4.45
8.66
4.11
8.23
3.79
7.81
3.51
7.44
3.26
7.09
3.03
6.76
2.83
6.45
2.64
6.17
2.46
5.91
2.30
5.64
2.15
5.40
2.02
5.18
1.89
4.99
1.79
4.79
1.67
4.59
1.59
4.44
1.50
4.26
1.41
4.11
1.34
3.96
1.26
12.03
7.92
12.03
7.61
12.03
7.29
12.03
7.00
12.01
6.75
11.64
6.34
11.29
5.98
10.96
5.67
10.66
5.34
10.37
5.02
10.09
4.74
9.78
4.46
9.28
4.14
8.84
3.83
8.40
3.57
8.03
3.32
7.66
3.09
7.31
2.88
7.00
2.71
6.69
2.53
6.43
2.37
6.17
2.23
5.91
2.10
5.69
1.98
5.47
1.86
5.25
1.76
5.07
1.66
4.88
1.57
4.70
1.48
12.03
7.92
12.03
7.61
12.03
7.29
12.03
7.00
12.01
6.75
11.64
6.34
11.29
5.98
10.96
5.67
10.66
5.34
10.37
5.02
10.09
4.74
9.82
4.49
9.58
4.24
9.34
4.04
9.12
3.85
8.90
3.67
8.71
3.50
8.51
3.34
8.31
3.19
8.14
3.06
7.99
2.93
7.81
2.81
7.66
2.69
7.39
2.55
7.11
2.40
6.85
2.27
6.58
2.14
6.34
2.02
6.12
1.92
12.03
7.92
11.68
7.41
10.96
6.72
10.31
6.12
9.69
5.60
9.15
5.12
8.64
4.71
8.16
4.33
7.74
3.99
7.35
3.69
6.98
3.41
6.63
3.16
6.32
2.94
6.04
2.74
5.75
2.56
5.49
2.39
5.27
2.23
5.03
2.10
4.83
1.97
4.64
1.85
4.44
1.73
4.26
1.63
4.11
1.54
3.96
1.45
3.80
1.37
3.67
1.29
3.54
1.22
3.41
1.16
3.30
1.10
3.19
1.05
3.08
1.00
12.03
7.92
12.03
7.58
12.01
7.29
11.38
6.71
10.72
6.12
10.11
5.60
9.54
5.15
9.04
4.74
8.55
4.37
8.12
4.04
7.72
3.73
7.33
3.47
7.00
3.22
6.67
3.00
6.37
2.80
6.08
2.61
5.82
2.45
5.58
2.29
5.34
2.15
5.12
2.02
4.92
1.89
4.72
1.79
4.55
1.69
4.37
1.59
4.20
1.50
4.04
1.43
3.91
1.34
3.78
1.28
3.65
1.21
3.52
1.15
3.41
1.09
12.03
7.92
12.03
7.58
12.01
7.29
11.64
6.82
11.29
6.43
10.96
6.05
10.39
5.58
9.82
5.13
9.32
4.74
8.84
4.37
8.40
4.05
7.99
3.76
7.61
3.50
7.26
3.25
6.93
3.03
6.63
2.84
6.34
2.65
6.06
2.49
5.82
2.33
5.58
2.18
5.36
2.05
5.14
1.94
4.94
1.83
4.77
1.73
4.57
1.63
4.42
1.54
4.26
1.45
4.11
1.38
3.96
1.31
3.83
1.25
3.69
1.18
12.03
7.92
12.03
7.58
12.01
7.29
11.64
6.82
11.29
6.43
10.96
6.05
10.66
5.72
10.37
5.45
10.09
5.15
9.82
4.85
9.58
4.59
9.34
4.37
9.04
4.11
8.62
3.83
8.23
3.57
7.85
3.34
7.53
3.12
7.20
2.93
6.89
2.74
6.63
2.58
6.37
2.42
6.10
2.29
5.86
2.15
5.64
2.04
5.45
1.92
5.25
1.82
5.05
1.72
4.88
1.63
4.70
1.54
4.55
1.47
4.40
1.40
12.03
7.92
12.03
7.58
12.01
7.29
11.64
6.82
11.29
6.43
10.96
6.05
10.66
5.72
10.37
5.45
10.09
5.15
9.82
4.85
9.58
4.59
9.34
4.37
9.12
4.14
8.90
3.94
8.71
3.76
8.51
3.59
8.31
3.44
8.14
3.29
7.92
3.13
7.59
2.94
7.28
2.77
7.00
2.61
6.74
2.46
6.47
2.32
6.23
2.18
6.01
2.07
5.80
1.97
5.60
1.86
5.40
1.76
5.23
1.67
5.05
1.59
12.03
7.92
12.03
7.58
12.01
7.29
11.64
6.82
11.29
6.43
10.96
6.05
10.66
5.72
10.37
5.45
10.09
5.15
9.82
4.85
9.58
4.59
9.34
4.37
9.12
4.14
8.90
3.94
8.71
3.76
8.51
3.59
8.31
3.44
8.14
3.29
7.99
3.15
7.81
3.02
7.66
2.90
7.50
2.80
7.35
2.68
7.22
2.58
7.09
2.48
6.82
2.34
6.58
2.23
6.34
2.11
6.12
1.99
5.93
1.89
5.73
1.80
17374
17678
17983
18288
36
The black figures in the following table give the TOTAL safe
uniformly distributed load-carrying capacities, in kiloNewtons
per meter (kN/m) of ASD K-Series Steel Joists. The weight
(kN/m) of the DEAD loads, including the joists, must be
deducted to determine the LIVE load-carrying capacities of the
joists. Sloped parallel-chord joists shall use span as defined
by the length along the slope.
The figures shown RED in this load table are the LIVE loads
per linear meter of joist which will produce an approximate
deflection of L/360 of the span. LIVE loads which produce a
deflection of L/240 of the span may be obtained by multiplying
the figures in RED by 1.5. In no case shall the TOTAL load
capacity of the joists be exceeded.
Where the joist span exceeds the unshaded area of the Load
Table, the row of bridging nearest the mid span shall be diagonal
bridging with bolted connections at the chords and intersections.
ASD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 245 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
Span (mm)
2438
2743
3048
3353
3658
3962
4267
4572
4877
5182
5486
5791
6096
6401
6706
7010
7315
7620
7925
8230
8534
8K1
203
7.6
10K1
254
7.4
12K1
305
7.4
12K3
305
8.5
12K5
305
10.6
14K1
356
7.7
14K3
356
8.9
14K4
356
10.0
14K6
356
11.5
16K2
406
8.2
16K3
406
9.4
16K4
406
10.4
16K5
406
11.2
16K6
406
12.1
16K7
406
12.8
16K9
406
14.9
0.07
0.07
0.07
0.08
0.10
0.08
0.09
0.10
0.11
0.08
0.09
0.10
0.11
0.12
0.13
0.15
8.02
8.02
8.02
7.44
7.29
6.20
6.33
5.02
5.54
4.11
4.90
3.41
4.36
2.87
3.91
2.43
3.51
2.07
3.18
1.79
2.90
1.54
2.64
1.35
2.42
1.18
8.02
8.02
8.02
7.44
8.02
6.75
7.92
6.24
6.94
5.12
6.12
4.24
5.45
3.57
4.88
3.02
4.40
2.58
3.98
2.23
3.63
1.92
3.31
1.69
3.03
1.47
8.02
8.02
8.02
7.44
8.02
6.75
8.02
6.33
8.02
5.77
8.02
5.34
7.39
4.62
6.62
3.92
5.96
3.35
5.39
2.88
4.91
2.51
4.49
2.18
4.11
1.92
8.02
8.02
7.45
6.93
6.53
5.69
5.76
4.72
5.13
3.96
4.59
3.35
4.14
2.87
3.75
2.48
3.41
2.14
3.12
1.86
2.86
1.64
2.62
1.45
2.42
1.28
2.24
1.15
2.08
1.02
8.02
8.02
8.02
7.39
8.02
6.81
7.22
5.89
6.43
4.94
5.76
4.18
5.19
3.59
4.69
3.09
4.27
2.68
3.91
2.33
3.57
2.05
3.29
1.80
3.05
1.60
2.81
1.43
2.62
1.28
8.02
8.02
8.02
7.39
8.02
6.81
8.02
6.46
7.73
5.79
6.93
4.90
6.24
4.18
5.66
3.61
5.15
3.13
4.69
2.74
4.30
2.40
3.96
2.11
3.66
1.88
3.40
1.67
3.15
1.50
8.02
8.02
8.02
7.39
8.02
6.81
8.02
6.46
8.02
5.95
8.02
5.58
7.66
5.06
6.93
4.36
6.30
3.77
5.76
3.29
5.28
2.90
4.87
2.55
4.49
2.27
4.15
2.02
3.86
1.80
8.02
8.02
7.47
7.12
6.65
5.96
5.95
5.06
5.37
4.33
4.85
3.72
4.42
3.23
4.04
2.83
3.70
2.48
3.41
2.18
3.15
1.94
2.91
1.73
2.71
1.54
2.52
1.38
2.34
1.25
2.20
1.13
2.07
1.03
8.02
8.02
8.02
7.67
7.41
6.65
6.64
5.63
5.98
4.81
5.41
4.15
4.91
3.60
4.49
3.15
4.13
2.75
3.79
2.43
3.50
2.15
3.25
1.92
3.02
1.72
2.81
1.54
2.62
1.40
2.45
1.26
2.30
1.15
8.02
8.02
8.02
7.67
8.02
7.15
7.98
6.59
7.19
5.63
6.52
4.85
5.92
4.21
5.41
3.67
4.96
3.22
4.56
2.84
4.21
2.52
3.91
2.26
3.63
2.01
3.38
1.80
3.15
1.63
2.96
1.47
2.77
1.34
8.02
8.02
8.02
7.67
8.02
7.15
8.02
6.64
8.02
6.21
7.34
5.44
6.68
4.71
6.10
4.11
5.60
3.61
5.15
3.19
4.75
2.83
4.40
2.52
4.10
2.26
3.80
2.02
3.56
1.83
3.32
1.66
3.12
1.50
8.02
8.02
8.02
7.67
8.02
7.15
8.02
6.64
8.02
6.21
7.99
5.91
7.26
5.12
6.64
4.48
6.10
3.92
5.60
3.47
5.18
3.07
4.80
2.74
4.46
2.45
4.15
2.20
3.88
1.99
3.63
1.80
3.40
1.63
8.02
8.02
8.02
7.67
8.02
7.15
8.02
6.64
8.02
6.21
8.02
5.92
8.02
5.61
7.39
4.94
6.78
4.34
6.24
3.83
5.76
3.40
5.34
3.03
4.96
2.71
4.62
2.43
4.31
2.20
4.04
1.99
3.77
1.80
8.02
8.02
8.02
7.67
8.02
7.15
8.02
6.64
8.02
6.21
8.02
5.92
8.02
5.61
8.02
5.29
8.02
5.04
7.50
4.53
6.91
4.02
6.40
3.59
5.95
3.21
5.54
2.88
5.18
2.59
4.84
2.34
4.53
2.14
8.02
8.02
8.02
8.02
8.02
7.00
7.76
5.50
6.47
4.20
5.50
3.28
4.72
2.61
4.10
2.11
3.59
1.73
8.02
8.02
8.02
7.90
8.02
6.64
6.99
5.29
6.01
4.21
5.22
3.41
4.56
2.80
4.04
2.32
3.59
1.95
3.22
1.64
2.90
1.41
8839
9144
9449
9754
37
ASD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth(mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
18K3 18K4 18K5 18K6 18K7 18K9 18K10 20K3 20K4 20K5 20K6 20K7 20K9 20K10 22K4 22K5 22K6 22K7 22K9 22K10 22K11
457
457
457
457
457
457
457
508
508
508
508
508
508
508
559
559
559
559
559
559
559
9.8
10.7
11.5
12.6
13.4
15.2
17.4
10.0
11.3
12.2
13.2
13.8
16.1
18.2
11.9
13.1
13.7
14.4
16.8
18.8
20.5
0.10
0.11
0.11
0.12
0.13
0.15
0.17
0.10
0.11
0.12
0.13
0.14
0.16
0.18
0.12
0.13
0.13
0.14
0.16
0.18
0.20
8.02
8.02
7.50
7.20
6.75
6.17
6.12
5.31
5.57
4.61
5.09
4.02
4.67
3.53
4.29
3.12
3.96
2.77
3.67
2.46
3.41
2.20
3.18
1.98
2.96
1.79
2.77
1.61
2.59
1.47
2.45
1.34
2.30
1.22
2.17
1.12
2.05
1.02
8.02
8.02
8.02
7.63
8.02
7.15
7.38
6.21
6.71
5.39
6.12
4.71
5.61
4.14
5.18
3.64
4.78
3.23
4.42
2.88
4.11
2.58
3.83
2.32
3.57
2.10
3.34
1.89
3.13
1.72
2.94
1.57
2.77
1.43
2.61
1.31
2.46
1.02
8.02
8.02
8.02
7.63
8.02
7.15
8.02
6.71
7.55
6.04
6.90
5.28
6.33
4.64
5.83
4.10
5.38
3.63
4.99
3.23
4.64
2.90
4.31
2.61
4.02
2.34
3.76
2.13
3.53
1.92
3.32
1.76
3.12
1.60
2.94
1.47
2.78
1.02
8.02
8.02
8.02
7.63
8.02
7.15
8.02
6.71
8.02
6.39
7.53
5.73
6.90
5.03
6.34
4.45
5.86
3.95
5.42
3.51
5.04
3.15
4.69
2.83
4.39
2.55
4.10
2.30
3.85
2.10
3.61
1.91
3.40
1.75
3.21
1.60
3.03
1.02
8.02
8.02
8.02
7.63
8.02
7.15
8.02
6.71
8.02
6.39
8.02
6.10
7.67
5.57
7.07
4.91
6.53
4.36
6.05
3.89
5.61
3.48
5.23
3.13
4.88
2.83
4.56
2.55
4.29
2.32
4.02
2.11
3.79
1.92
3.57
1.76
3.38
1.61
8.02
8.02
8.02
7.63
8.02
7.15
8.02
6.71
8.02
6.39
8.02
6.10
8.02
5.77
8.02
5.50
7.85
5.16
7.26
4.59
6.75
4.11
6.28
3.70
5.86
3.34
5.48
3.02
5.15
2.74
4.84
2.49
4.55
2.27
4.29
2.08
4.05
1.92
8.02
8.02
8.02
7.63
8.02
7.15
8.02
6.71
8.02
6.39
8.02
6.10
8.02
5.77
8.02
5.50
8.02
5.26
8.02
5.06
7.99
4.83
7.45
4.34
6.96
3.92
6.50
3.54
6.10
3.22
5.73
2.93
5.39
2.68
5.09
2.45
4.81
2.24
7.54
7.54
6.82
6.61
6.21
5.73
5.67
5.02
5.21
4.40
4.80
3.88
4.43
3.44
4.10
3.07
3.80
2.75
3.54
2.48
3.31
2.23
3.09
2.01
2.90
1.83
2.72
1.66
2.56
1.53
2.42
1.40
2.29
1.28
2.15
1.18
2.05
1.07
1.94
1.00
1.85
0.93
8.02
8.02
8.02
7.58
7.50
6.72
6.84
5.86
6.27
5.15
5.77
4.55
5.34
4.04
4.94
3.60
4.59
3.22
4.27
2.90
3.99
2.61
3.73
2.36
3.50
2.14
3.29
1.95
3.09
1.78
2.91
1.63
2.75
1.50
2.61
1.38
2.48
1.26
2.34
1.18
2.23
1.09
8.02
8.02
8.02
7.58
8.02
7.15
7.72
6.58
7.07
5.77
6.50
5.10
6.01
4.52
5.57
4.04
5.18
3.61
4.81
3.25
4.49
2.93
4.21
2.65
3.95
2.40
3.70
2.18
3.48
1.99
3.29
1.83
3.10
1.67
2.94
1.54
2.78
1.43
2.64
1.31
2.51
1.22
8.02
8.02
8.02
7.58
8.02
7.15
8.02
6.82
7.70
6.27
7.09
5.54
6.55
4.91
6.07
4.39
5.63
3.92
5.25
3.53
4.90
3.18
4.58
2.88
4.30
2.61
4.04
2.37
3.80
2.17
3.59
1.99
3.38
1.82
3.21
1.67
3.03
1.54
2.88
1.43
2.74
1.32
8.02
8.02
8.02
7.58
8.02
7.15
8.02
6.82
8.02
6.53
7.89
6.14
7.29
5.44
6.75
4.85
6.27
4.34
5.85
3.91
5.45
3.53
5.10
3.19
4.78
2.90
4.50
2.64
4.23
2.40
3.99
2.20
3.77
2.02
3.57
1.86
3.38
1.72
3.21
1.59
3.05
1.47
8.02
8.02
8.02
7.58
8.02
7.15
8.02
6.82
8.02
6.53
8.02
6.21
8.02
5.91
8.02
5.67
7.54
5.15
7.03
4.62
6.56
4.17
6.14
3.77
5.76
3.42
5.41
3.12
5.09
2.84
4.80
2.61
4.53
2.39
4.29
2.20
4.07
2.02
3.86
1.88
3.66
1.73
8.02
8.02
8.02
7.58
8.02
7.15
8.02
6.82
8.02
6.53
8.02
6.21
8.02
5.91
8.02
5.67
8.02
5.47
8.02
5.23
7.77
4.90
7.28
4.43
6.82
4.02
6.42
3.66
6.04
3.34
5.69
3.06
5.38
2.81
5.09
2.59
4.83
2.39
4.58
2.20
4.34
2.04
8.02
7.99
7.55
7.16
6.93
6.28
6.39
5.56
5.89
4.93
5.45
4.39
5.07
3.94
4.72
3.53
4.40
3.19
4.13
2.88
3.86
2.62
3.63
2.39
3.42
2.17
3.22
1.99
3.05
1.83
2.88
1.69
2.72
1.56
2.59
1.43
2.46
1.32
2.34
1.24
2.23
1.15
2.13
1.06
2.02
0.99
8.02
7.99
8.02
7.55
7.82
7.04
7.19
6.23
6.64
5.53
6.15
4.91
5.72
4.40
5.32
3.96
4.97
3.57
4.65
3.23
4.36
2.93
4.10
2.67
3.86
2.43
3.63
2.23
3.44
2.05
3.25
1.89
3.07
1.73
2.91
1.60
2.77
1.48
2.64
1.38
2.52
1.28
2.40
1.19
2.29
1.10
8.02
7.99
8.02
7.55
8.02
7.22
7.83
6.77
7.23
5.99
6.69
5.35
6.23
4.78
5.80
4.30
5.41
3.88
5.06
3.51
4.75
3.19
4.46
2.90
4.20
2.65
3.96
2.43
3.75
2.23
3.54
2.05
3.35
1.89
3.18
1.75
3.02
1.61
2.87
1.50
2.74
1.40
2.61
1.29
2.49
1.21
8.02
7.99
8.02
7.55
8.02
7.22
8.02
6.91
8.02
6.62
7.47
5.92
6.93
5.31
6.46
4.77
6.02
4.30
5.64
3.89
5.29
3.53
4.97
3.22
4.68
2.94
4.42
2.69
4.17
2.46
3.95
2.27
3.73
2.10
3.54
1.94
3.37
1.79
3.21
1.66
3.05
1.54
2.91
1.44
2.78
1.34
8.02
7.99
8.02
7.55
8.02
7.22
8.02
6.91
8.02
6.62
8.02
6.30
8.02
6.02
7.76
5.64
7.25
5.09
6.78
4.61
6.36
4.18
5.98
3.80
5.63
3.48
5.31
3.19
5.02
2.93
4.74
2.69
4.49
2.48
4.26
2.29
4.05
2.13
3.85
1.97
3.67
1.83
3.50
1.70
3.34
1.59
8.02
7.99
8.02
7.55
8.02
7.22
8.02
6.91
8.02
6.62
8.02
6.30
8.02
6.02
8.02
5.82
8.02
5.61
8.02
5.38
7.54
4.91
7.09
4.48
6.68
4.08
6.30
3.75
5.95
3.44
5.63
3.16
5.34
2.91
5.06
2.69
4.81
2.49
4.58
2.32
4.36
2.15
4.15
2.01
3.96
1.86
8.02
7.99
8.02
7.55
8.02
7.22
8.02
6.91
8.02
6.62
8.02
6.30
8.02
6.02
8.02
5.82
8.02
5.61
8.02
5.38
8.01
5.18
7.76
4.87
7.53
4.58
7.20
4.26
6.81
3.92
6.45
3.60
6.11
3.32
5.79
3.07
5.50
2.84
5.23
2.64
4.99
2.45
4.75
2.29
4.53
2.13
Span (mm)
5486
5791
6096
6401
6706
7010
7315
7620
7925
8230
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
38
ASD
METRIC LOAD TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 345 MPa Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
Span (mm)
7315
7620
7925
8230
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
13716
14021
14326
14630
24K4
24K5
24K6
24K7
24K8
24K9
24K10
24K12
26K5
26K6
26K7
26K8
26K9
26K10
610
610
610
610
610
610
610
610
660
660
660
660
660
660
660
12.5
13.8
14.4
15.0
17.1
17.9
19.5
23.8
14.6
15.8
16.2
18.0
18.2
20.5
24.7
0.12
0.14
0.14
0.15
0.17
0.18
0.19
0.23
0.14
0.15
0.16
0.18
0.18
0.20
0.24
7.58
7.53
6.99
6.65
6.45
5.91
5.98
5.26
5.56
4.71
5.16
4.23
4.83
3.82
4.52
3.45
4.23
3.13
3.98
2.86
3.75
2.61
3.53
2.39
3.34
2.18
3.15
2.01
2.99
1.86
2.84
1.72
2.69
1.59
2.56
1.47
2.45
1.37
2.33
1.28
2.23
1.19
2.13
1.10
2.02
1.03
1.94
0.97
1.86
0.91
8.02
7.93
7.88
7.45
7.28
6.61
6.74
5.89
6.26
5.28
5.83
4.74
5.44
4.27
5.09
3.88
4.77
3.51
4.49
3.21
4.23
2.93
3.98
2.68
3.76
2.46
3.56
2.26
3.37
2.08
3.19
1.92
3.03
1.78
2.88
1.66
2.75
1.54
2.62
1.43
2.51
1.34
2.39
1.25
2.29
1.16
2.18
1.09
2.10
1.02
8.02
7.93
8.02
7.58
7.92
7.19
7.34
6.40
6.81
5.73
6.34
5.16
5.92
4.65
5.54
4.21
5.21
3.82
4.88
3.48
4.59
3.18
4.33
2.91
4.10
2.67
3.88
2.46
3.67
2.27
3.48
2.10
3.31
1.94
3.15
1.80
3.00
1.67
2.86
1.56
2.72
1.45
2.61
1.35
2.49
1.26
2.39
1.19
2.29
1.12
8.02
7.93
8.02
7.58
8.02
7.28
8.02
6.99
7.60
6.36
7.07
5.72
6.61
5.15
6.18
4.67
5.79
4.23
5.44
3.86
5.12
3.53
4.83
3.22
4.56
2.96
4.31
2.72
4.10
2.51
3.88
2.32
3.69
2.15
3.51
1.99
3.34
1.85
3.19
1.72
3.05
1.60
2.90
1.50
2.78
1.41
2.67
1.31
2.55
1.24
8.02
7.93
8.02
7.58
8.02
7.28
8.02
6.99
8.02
6.65
7.82
6.26
7.29
5.64
6.82
5.10
6.40
4.64
6.02
4.21
5.66
3.85
5.34
3.53
5.04
3.23
4.77
2.99
4.52
2.75
4.29
2.53
4.08
2.34
3.88
2.18
3.69
2.02
3.53
1.89
3.37
1.76
3.21
1.64
3.07
1.54
2.94
1.44
2.83
1.35
8.02
7.93
8.02
7.58
8.02
7.28
8.02
6.99
8.02
6.65
8.02
6.36
7.93
6.11
7.44
5.53
6.97
5.02
6.55
4.56
6.17
4.17
5.82
3.82
5.50
3.51
5.19
3.23
4.93
2.97
4.67
2.75
4.43
2.55
4.23
2.36
4.02
2.20
3.83
2.04
3.66
1.91
3.50
1.78
3.35
1.66
3.21
1.56
3.07
1.47
8.02
7.93
8.02
7.58
8.02
7.28
8.02
6.99
8.02
6.65
8.02
6.36
8.02
6.15
8.02
5.98
8.01
5.73
7.76
5.37
7.32
4.91
6.90
4.49
6.52
4.13
6.17
3.79
5.85
3.50
5.54
3.23
5.26
3.00
5.02
2.78
4.77
2.58
4.55
2.40
4.34
2.24
4.15
2.10
3.96
1.97
3.80
1.83
3.64
1.72
8.02
7.93
8.02
7.58
8.02
7.28
8.02
6.99
8.02
6.65
8.02
6.36
8.02
6.15
8.02
5.98
8.01
5.73
7.76
5.37
7.53
5.02
7.31
4.72
7.10
4.46
6.91
4.23
6.72
4.01
6.55
3.80
6.39
3.60
6.23
3.42
6.08
3.26
5.92
3.10
5.64
2.90
5.39
2.69
5.16
2.53
4.94
2.37
4.74
2.23
7.90
7.80
7.32
6.96
6.80
6.23
6.33
5.60
5.91
5.04
5.53
4.58
5.19
4.15
4.87
3.77
4.59
3.45
4.33
3.16
4.08
2.90
3.86
2.67
3.66
2.46
3.47
2.27
3.31
2.11
3.13
1.95
2.99
1.82
2.86
1.69
2.72
1.57
2.61
1.47
2.49
1.38
2.39
1.29
2.29
1.21
2.18
1.13
2.10
1.06
2.02
1.00
1.94
0.94
8.02
7.89
7.98
7.57
7.41
6.77
6.90
6.08
6.43
5.50
6.02
4.97
5.64
4.50
5.31
4.11
5.00
3.75
4.71
3.44
4.45
3.15
4.21
2.90
3.99
2.68
3.79
2.48
3.60
2.29
3.42
2.13
3.26
1.98
3.10
1.83
2.97
1.72
2.83
1.60
2.71
1.50
2.59
1.40
2.49
1.31
2.39
1.24
2.29
1.16
2.20
1.09
2.11
1.03
8.02
7.89
8.02
7.61
8.02
7.31
7.69
6.75
7.18
6.08
6.71
5.51
6.30
5.00
5.92
4.55
5.57
4.15
5.25
3.80
4.96
3.50
4.69
3.22
4.45
2.97
4.21
2.74
4.01
2.53
3.82
2.36
3.63
2.18
3.47
2.04
3.31
1.91
3.16
1.78
3.02
1.66
2.90
1.56
2.77
1.45
2.67
1.37
2.55
1.29
2.45
1.21
2.36
1.15
8.02
7.89
8.02
7.61
8.02
7.31
8.02
6.99
7.93
6.66
7.42
6.02
6.96
5.47
6.53
4.99
6.15
4.55
5.80
4.17
5.48
3.83
5.19
3.53
4.91
3.25
4.67
3.00
4.43
2.78
4.21
2.58
4.01
2.39
3.83
2.23
3.66
2.08
3.50
1.94
3.34
1.82
3.19
1.70
3.06
1.60
2.94
1.50
2.83
1.41
2.71
1.32
2.61
1.25
8.02
7.89
8.02
7.61
8.02
7.31
8.02
6.99
8.02
6.69
8.02
6.47
7.57
5.93
7.12
5.39
6.69
4.93
6.31
4.52
5.96
4.14
5.64
3.82
5.35
3.51
5.07
3.25
4.83
3.02
4.59
2.80
4.37
2.59
4.17
2.42
3.98
2.26
3.80
2.11
3.64
1.97
3.48
1.85
3.34
1.73
3.21
1.63
3.07
1.53
2.96
1.44
2.84
1.35
8.02
7.89
8.02
7.61
8.02
7.31
8.02
6.99
8.02
6.69
8.02
6.47
8.01
6.28
7.76
5.89
7.53
5.51
7.31
5.19
7.09
4.87
6.71
4.49
6.36
4.14
6.02
3.82
5.73
3.54
5.45
3.28
5.19
3.06
4.94
2.84
4.72
2.65
4.52
2.48
4.31
2.32
4.14
2.17
3.96
2.04
3.80
1.91
3.64
1.80
3.51
1.69
3.37
1.60
8.02
7.89
8.02
7.61
8.02
7.31
8.02
6.99
8.02
6.69
8.02
6.47
8.01
6.28
7.76
5.89
7.53
5.51
7.31
5.19
7.10
4.87
6.91
4.59
6.72
4.36
6.55
4.13
6.39
3.92
6.23
3.73
6.08
3.56
5.93
3.38
5.80
3.23
5.67
3.09
5.54
2.96
5.38
2.80
5.15
2.62
4.94
2.46
4.74
2.32
4.56
2.18
4.39
2.07
14935
15240
15545
15850
39
26K12
ASD
Based on a 345 MPa Yield Strength - Load Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Depth (mm)
Approx. Mass
(kg/m)
Approx. Mass
(kN/m)
Span (mm)
8534
8839
9144
9449
9754
10058
10363
10668
10973
11278
11582
11887
12192
12497
12802
13106
13411
13716
14021
14326
14630
14935
15240
15545
15850
16154
16459
16764
17069
28K6
28K7
28K8
28K9
28k10
28K12
30K7
30K8
30K9
30K10
30K11
711
711
711
711
711
711
762
762
762
762
762
762
17.0
17.6
18.9
19.3
21.3
25.5
18.3
19.6
19.9
22.3
24.4
26.2
0.17
0.17
0.19
0.19
0.21
0.25
0.18
0.19
0.20
0.22
0.24
0.26
7.99
7.89
7.45
7.09
6.96
6.40
6.50
5.79
6.10
5.26
5.73
4.80
5.39
4.37
5.09
4.01
4.81
3.67
4.55
3.38
4.31
3.12
4.08
2.88
3.88
2.67
3.69
2.48
3.51
2.30
3.35
2.14
3.21
1.99
3.06
1.86
2.93
1.75
2.80
1.63
2.68
1.53
2.58
1.44
2.48
1.35
2.37
1.28
2.29
1.21
2.20
1.13
2.11
1.07
2.04
1.02
1.97
0.96
8.02
7.92
8.02
7.61
7.74
7.09
7.25
6.42
6.80
5.83
6.39
5.31
6.01
4.85
5.67
4.45
5.35
4.08
5.07
3.75
4.80
3.45
4.56
3.19
4.33
2.96
4.13
2.75
3.92
2.55
3.75
2.37
3.57
2.21
3.41
2.07
3.26
1.94
3.12
1.82
3.00
1.70
2.87
1.60
2.75
1.50
2.65
1.41
2.55
1.34
2.45
1.26
2.36
1.19
2.27
1.12
2.20
1.06
8.02
7.92
8.02
7.61
8.02
7.29
8.02
7.00
7.51
6.39
7.06
5.82
6.65
5.31
6.27
4.85
5.92
4.46
5.60
4.11
5.31
3.79
5.04
3.50
4.78
3.23
4.55
3.00
4.33
2.80
4.14
2.61
3.95
2.43
3.77
2.27
3.61
2.13
3.45
1.98
3.31
1.86
3.18
1.75
3.05
1.64
2.93
1.54
2.81
1.45
2.71
1.38
2.61
1.29
2.52
1.24
2.42
1.16
8.02
7.92
8.02
7.61
8.02
7.29
8.02
7.00
8.01
6.75
7.69
6.30
7.23
5.76
6.82
5.26
6.45
4.84
6.10
4.45
5.77
4.11
5.48
3.79
5.21
3.51
4.96
3.26
4.72
3.03
4.50
2.83
4.30
2.64
4.11
2.46
3.94
2.30
3.76
2.15
3.60
2.02
3.45
1.89
3.32
1.79
3.19
1.67
3.06
1.59
2.96
1.50
2.84
1.41
2.74
1.34
2.64
1.26
8.02
7.92
8.02
7.61
8.02
7.29
8.02
7.00
8.01
6.75
7.76
6.34
7.53
5.98
7.31
5.67
7.10
5.34
6.91
5.02
6.72
4.74
6.52
4.46
6.18
4.14
5.89
3.83
5.60
3.57
5.35
3.32
5.10
3.09
4.87
2.88
4.67
2.71
4.46
2.53
4.29
2.37
4.11
2.23
3.94
2.10
3.79
1.98
3.64
1.86
3.50
1.76
3.38
1.66
3.25
1.57
3.13
1.48
8.02
7.92
8.02
7.61
8.02
7.29
8.02
7.00
8.01
6.75
7.76
6.34
7.53
5.98
7.31
5.67
7.10
5.34
6.91
5.02
6.72
4.74
6.55
4.49
6.39
4.24
6.23
4.04
6.08
3.85
5.93
3.67
5.80
3.50
5.67
3.34
5.54
3.19
5.42
3.06
5.32
2.93
5.21
2.81
5.10
2.69
4.93
2.55
4.74
2.40
4.56
2.27
4.39
2.14
4.23
2.02
4.08
1.92
8.02
7.92
7.79
7.41
7.31
6.72
6.87
6.12
6.46
5.60
6.10
5.12
5.76
4.71
5.44
4.33
5.16
3.99
4.90
3.69
4.65
3.41
4.42
3.16
4.21
2.94
4.02
2.74
3.83
2.56
3.66
2.39
3.51
2.23
3.35
2.10
3.22
1.97
3.09
1.85
2.96
1.73
2.84
1.63
2.74
1.54
2.64
1.45
2.53
1.37
2.45
1.29
2.36
1.22
2.27
1.16
2.20
1.10
2.13
1.05
2.05
1.00
8.02
7.92
8.02
7.58
8.01
7.29
7.58
6.71
7.15
6.12
6.74
5.60
6.36
5.15
6.02
4.74
5.70
4.37
5.41
4.04
5.15
3.73
4.88
3.47
4.67
3.22
4.45
3.00
4.24
2.80
4.05
2.61
3.88
2.45
3.72
2.29
3.56
2.15
3.41
2.02
3.28
1.89
3.15
1.79
3.03
1.69
2.91
1.59
2.80
1.50
2.69
1.43
2.61
1.34
2.52
1.28
2.43
1.21
2.34
1.15
2.27
1.09
8.02
7.92
8.02
7.58
8.01
7.29
7.76
6.82
7.53
6.43
7.31
6.05
6.93
5.58
6.55
5.13
6.21
4.74
5.89
4.37
5.60
4.05
5.32
3.76
5.07
3.50
4.84
3.25
4.62
3.03
4.42
2.84
4.23
2.65
4.04
2.49
3.88
2.33
3.72
2.18
3.57
2.05
3.42
1.94
3.29
1.83
3.18
1.73
3.05
1.63
2.94
1.54
2.84
1.45
2.74
1.38
2.64
1.31
2.55
1.25
2.46
1.18
8.02
7.92
8.02
7.58
8.01
7.29
7.76
6.82
7.53
6.43
7.31
6.05
7.10
5.72
6.91
5.45
6.72
5.15
6.55
4.85
6.39
4.59
6.23
4.37
6.02
4.11
5.74
3.83
5.48
3.57
5.23
3.34
5.02
3.12
4.80
2.93
4.59
2.74
4.42
2.58
4.24
2.42
4.07
2.29
3.91
2.15
3.76
2.04
3.63
1.92
3.50
1.82
3.37
1.72
3.25
1.63
3.13
1.54
3.03
1.47
2.93
1.40
8.02
7.92
8.02
7.58
8.01
7.29
7.76
6.82
7.53
6.43
7.31
6.05
7.10
5.72
6.91
5.45
6.72
5.15
6.55
4.85
6.39
4.59
6.23
4.37
6.08
4.14
5.93
3.94
5.80
3.76
5.67
3.59
5.54
3.44
5.42
3.29
5.28
3.13
5.06
2.94
4.85
2.77
4.67
2.61
4.49
2.46
4.31
2.32
4.15
2.18
4.01
2.07
3.86
1.97
3.73
1.86
3.60
1.76
3.48
1.67
3.37
1.59
8.02
7.92
8.02
7.58
8.01
7.29
7.76
6.82
7.53
6.43
7.31
6.05
7.10
5.72
6.91
5.45
6.72
5.15
6.55
4.85
6.39
4.59
6.23
4.37
6.08
4.14
5.93
3.94
5.80
3.76
5.67
3.59
5.54
3.44
5.42
3.29
5.32
3.15
5.21
3.02
5.10
2.90
5.00
2.80
4.90
2.68
4.81
2.58
4.72
2.48
4.55
2.34
4.39
2.23
4.23
2.11
4.08
1.99
3.95
1.89
3.82
1.80
17374
17678
17983
18288
40
30K12
KCS JOISTS
M o
o
R
KCS JOIST
SHEAR AND MOMENT ENVELOPES
LRFD EXAMPLES
EXAMPLE 1
The web forces are determined based on a flat shear envelope. All webs are designed for a vertical shear equal to the
specified shear capacity. Furthermore, all webs (except the
first tension web which remains in tension under all simple
span gravity loads) will be designed for 100% stress reversal.
Both LRFD and ASD KCS Joist load tables list the shear and
moment capacity of each joist. The selection of a KCS Joist
requires the specifying professional to calculate the maximum moment and shear imposed and select the appropriate
KCS Joist. If a KCS Joist cannot be selected from the load
table or if any uniform load exceeds 825 plf (12030 N/m)
LRFD or 550 plf (8020 N/m) ASD or if the maximum concentrated load exceeds the shear capacity of the joist, use
double KCS Joists or select an LH-Series Joist. For the LHSeries Joist, supply a load diagram. When net uplift loads,
end moments or other external horizontal loads are a design
consideration; these loads shall be provided to the joist manufacturer by the specifying professional.
RR
41
EXAMPLE 2
OPTION B: Select an LH-Series Joist. Calculate an equivalent uniform load based on the maximum moment or shear:
8.0 ft
3.0 ft
WM =
8M
= 962 plf (14.04 kN/m)
L2
WV =
2R
= 764 plf (11.14 kN/m)
L
914 mm
(2438mm)
7.0 ft
2134 mm
L = 30 ft (9144 mm)
RR
RL
JOIST MANUFACTURER SHALL DESIGN FOR THE LOADING SHOWN IN THE LOAD DIAGRAM.
ASD EXAMPLES
EXAMPLE 1
1000 lbs (4.45 kN)
8.2 ft
(2438 mm)
EXAMPLE 3
Design Length)
RR
42
EXAMPLE 2
EXAMPLE 3
300 lbs (1.33 kN)
800 lbs (3.56 kN)
3.0 ft
2438 mm
7.0 ft
914 mm
2134 mm
L = 30 ft (9144 mm)
RL
RR
WM =
8M
= 641 plf (9.35 kN/m)
L2
WV =
2R
= 509 plf (7.43 kN/m)
L
43
LRFD
STANDARD LOAD TABLE FOR KCS OPEN WEB STEEL JOISTS
Based on a 50 ksi Maximum Yield Strength
JOIST
DESIGNATION
DEPTH
(inches)
MOMENT
CAPACITY
(inch-kips)
SHEAR
CAPACITY*
(lbs)
APPROX.
WEIGHT**
(lbs/ft)
GROSS
MOMENT OF
INERTIA (in.4 )
10KCS1
10KCS2
10KCS3
12KCS1
12KCS2
12KCS3
14KCS1
14KCS2
14KCS3
16KCS2
16KCS3
16KCS4
16KCS5
18KCS2
18KCS3
18KCS4
18KCS5
20KCS2
20KCS3
20KCS4
20KCS5
22KCS2
22KCS3
22KCS4
22KCS5
24KCS2
24KCS3
24KCS4
24KCS5
26KCS2
26KCS3
26KCS4
26KCS5
28KCS2
28KCS3
28KCS4
28KCS5
30KCS3
30KCS4
30KCS5
10
10
10
12
12
12
14
14
14
16
16
16
16
18
18
18
18
20
20
20
20
22
22
22
22
24
24
24
24
26
26
26
26
28
28
28
28
30
30
30
258
337
444
313
411
543
370
486
642
523
705
1080
1401
592
798
1225
1593
663
892
1371
1786
732
987
1518
1978
801
1080
1662
2172
870
1174
1809
2364
939
1269
1954
2556
1362
2100
2749
3000
3750
4500
3600
4500
5250
4350
5100
5850
6000
7200
7950
8700
7050
7800
8550
9300
7800
9000
11850
12600
8850
9900
11850
12900
9450
10800
12600
13350
9900
11700
12750
13800
10350
12000
12750
13800
12000
12750
13800
6.0
7.5
10.0
6.0
8.0
10.0
6.5
8.0
10.0
8.5
10.5
14.5
18.0
9.0
11.0
15.0
18.5
9.5
11.5
16.5
20.0
10.0
12.5
16.5
20.5
10.0
12.5
16.5
20.5
10.0
12.5
16.5
20.5
10.5
12.5
16.5
20.5
13.0
16.5
21.0
29
37
47
43
55
71
59
77
99
99
128
192
245
127
164
247
316
159
205
308
396
194
251
377
485
232
301
453
584
274
355
536
691
320
414
626
808
478
722
934
BRIDGING
TABLE
SECTION
NUMBER
1
1
1
3
5
5
4
6
6
6
9
9
9
6
9
10
10
6
9
10
10
6
9
11
11
6
9
12
12
6
9
12
12
6
9
12
12
9
12
12
*MAXIMUM UNIFORMLY DISTRIBUTED LOAD CAPACITY IS 825 PLF AND SINGLE CONCENTRATED LOAD CANNOT
EXCEED SHEAR CAPACITY
**DOES NOT INCLUDE ACCESSORIES
44
ASD
STANDARD LOAD TABLE FOR KCS OPEN WEB STEEL JOISTS
Based on a 50 ksi Maximum Yield Strength
JOIST
DESIGNATION
DEPTH
(inches)
MOMENT
CAPACITY*
(inch-kips)
SHEAR
CAPACITY*
(lbs)
APPROX.
WEIGHT**
(lbs/ft)
GROSS
MOMENT OF
INERTIA (in.4 )
10KCS1
10KCS2
10KCS3
12KCS1
12KCS2
12KCS3
14KCS1
14KCS2
14KCS3
16KCS2
16KCS3
16KCS4
16KCS5
18KCS2
18KCS3
18KCS4
18KCS5
20KCS2
20KCS3
20KCS4
20KCS5
22KCS2
22KCS3
22KCS4
22KCS5
24KCS2
24KCS3
24KCS4
24KCS5
26KCS2
26KCS3
26KCS4
26KCS5
28KCS2
28KCS3
28KCS4
28KCS5
30KCS3
30KCS4
30KCS5
10
10
10
12
12
12
14
14
14
16
16
16
16
18
18
18
18
20
20
20
20
22
22
22
22
24
24
24
24
26
26
26
26
28
28
28
28
30
30
30
172
225
296
209
274
362
247
324
428
349
470
720
934
395
532
817
1062
442
595
914
1191
488
658
1012
1319
534
720
1108
1448
580
783
1206
1576
626
846
1303
1704
908
1400
1833
2000
2500
3000
2400
3000
3500
2900
3400
3900
4000
4800
5300
5800
4700
5200
5700
6200
5200
6000
7900
8400
5900
6600
7900
8600
6300
7200
8400
8900
6600
7800
8500
9200
6900
8000
8500
9200
8000
8500
9200
6.0
7.5
10.0
6.0
8.0
10.0
6.5
8.0
10.0
8.5
10.5
14.5
18.0
9.0
11.0
15.0
18.5
9.5
11.5
16.5
20.0
10.0
12.5
16.5
20.5
10.0
12.5
16.5
20.5
10.0
12.5
16.5
20.5
10.5
12.5
16.5
20.5
13.0
16.5
21.0
29
37
47
43
55
71
59
77
99
99
128
192
245
127
164
247
316
159
205
308
396
194
251
377
485
232
301
453
584
274
355
536
691
320
414
626
808
478
722
934
BRIDGING
TABLE
SECTION
NUMBER
1
1
1
3
5
5
4
6
6
6
9
9
9
6
9
10
10
6
9
10
10
6
9
11
11
6
9
12
12
6
9
12
12
6
9
12
12
9
12
12
*MAXIMUM UNIFORMLY DISTRIBUTED LOAD CAPACITY IS 550 PLF AND SINGLE CONCENTRATED LOAD CANNOT
EXCEED SHEAR CAPACITY
**DOES NOT INCLUDE ACCESSORIES
45
LRFD
METRIC LOAD TABLE FOR KCS OPEN WEB STEEL JOISTS
Based on a 345 MPa Maximum Yield Strength
APPROXIMATE
WEIGHT**
JOIST
DESIGNATION
DEPTH
(mm)
MOMENT
CAPACITY
(kN-m)
SHEAR
CAPACITY*
(kN)
(kN/m)
(kg/m)
GROSS
MOMENT OF
INERTIA (cm 4 )
10KCS1
10KCS2
10KCS3
12KCS1
12KCS2
12KCS3
14KCS1
14KCS2
14KCS3
16KCS2
16KCS3
16KCS4
16KCS5
18KCS2
18KCS3
18KCS4
18KCS5
20KCS2
20KCS3
20KCS4
20KCS5
22KCS2
22KCS3
22KCS4
22KCS5
24KCS2
24KCS3
24KCS4
24KCS5
26KCS2
26KCS3
26KCS4
26KCS5
28KCS2
28KCS3
28KCS4
28KCS5
30KCS3
30KCS4
30KCS5
254
254
254
305
305
305
356
356
356
406
406
406
406
457
457
457
457
508
508
508
508
559
559
559
559
610
610
610
610
660
660
660
660
711
711
711
711
762
762
762
29.1
38.1
50.1
35.4
46.4
61.3
41.8
54.9
72.5
59.1
79.6
122.0
158.2
66.9
90.1
138.4
179.9
74.9
100.8
154.9
201.8
82.7
111.5
171.5
223.5
90.5
122.0
187.7
245.4
98.2
132.7
204.3
267.0
106.0
143.3
220.8
288.7
153.8
237.2
310.6
13.3
16.6
20.0
16.0
20.0
23.3
19.3
22.6
26.0
26.6
32.0
35.3
38.6
31.3
34.6
38.0
41.3
34.6
40.0
52.7
56.0
39.3
44.0
52.7
57.3
42.0
48.0
56.0
59.3
44.0
52.0
56.7
61.3
46.0
53.3
56.7
61.3
53.3
56.7
61.3
0.09
0.11
0.15
0.09
0.12
0.15
0.09
0.12
0.15
0.12
0.15
0.21
0.26
0.13
0.16
0.22
0.27
0.14
0.17
0.24
0.29
0.15
0.18
0.24
0.30
0.15
0.18
0.24
0.30
0.15
0.18
0.24
0.30
0.15
0.18
0.24
0.30
0.19
0.24
0.31
8.9
11.2
14.9
8.9
11.9
14.9
9.7
11.9
14.9
12.6
15.6
21.6
26.8
13.4
16.4
22.3
27.5
14.1
17.1
24.6
29.8
14.9
18.6
24.6
30.5
14.9
18.6
24.6
30.5
14.9
18.6
24.6
30.5
15.6
18.6
24.6
30.5
19.3
24.6
31.3
1200
1540
1950
1780
2280
2950
2450
3200
4120
4120
5320
7990
10190
5280
6820
10280
13150
6610
8530
12810
16480
8070
10440
15690
20180
9650
12520
18850
24300
11400
14770
22310
28760
13310
17230
26050
33630
19890
30050
38870
46
BRIDGING
TABLE
SECTION
NUMBER
1
1
1
3
5
5
4
6
6
6
9
9
9
6
9
10
10
6
9
10
10
6
9
11
11
6
9
12
12
6
9
12
12
6
9
12
12
9
12
12
ASD
METRIC LOAD TABLE FOR KCS OPEN WEB STEEL JOISTS
Based on a 345 MPa Maximum Yield Strength
BRIDGING
TABLE
SECTION
(kN/m)
(kg/m)
NUMBER
10KCS1
254
19.4
8.8
0.09
8.9
1200
1
10KCS2
254
25.4
11.1
0.11
11.2
1540
1
10KCS3
254
33.4
13.3
0.15
14.9
1950
1
12KCS1
305
23.6
10.6
0.09
8.9
1780
3
12KCS2
305
31.0
13.3
0.12
11.9
2280
5
12KCS3
305
40.9
15.5
0.15
14.9
2950
5
14KCS1
356
27.9
12.8
0.09
9.7
2450
4
14KCS2
356
36.6
15.1
0.12
11.9
3200
6
14KCS3
356
48.4
17.3
0.15
14.9
4120
6
16KCS2
406
39.4
17.7
0.12
12.6
4120
6
16KCS3
406
53.1
21.3
0.15
15.6
5320
9
16KCS4
406
81.3
23.5
0.21
21.6
7990
9
16KCS5
406
105.5
25.7
0.26
26.8
10190
9
18KCS2
457
44.6
20.9
0.13
13.4
5280
6
18KCS3
457
60.1
23.1
0.16
16.4
6820
9
18KCS4
457
92.3
25.3
0.22
22.3
10280
10
18KCS5
457
120.0
27.5
0.27
27.5
13150
10
20KCS2
508
49.9
23.1
0.14
14.1
6610
6
20KCS3
508
67.2
26.6
0.17
17.1
8530
9
20KCS4
508
103.3
35.1
0.24
24.6
12810
10
20KCS5
508
134.6
37.3
0.29
29.8
16480
10
22KCS2
559
55.1
26.2
0.15
14.9
8070
6
22KCS3
559
74.3
29.3
0.18
18.6
10440
9
22KCS4
559
114.3
35.1
0.24
24.6
15690
11
22KCS5
559
149.0
38.2
0.30
30.5
20180
11
24KCS2
610
60.3
28.0
0.15
14.9
9650
6
24KCS3
610
81.3
32.0
0.18
18.6
12520
9
24KCS4
610
125.2
37.3
0.24
24.6
18850
12
24KCS5
610
163.6
39.5
0.30
30.5
24300
12
26KCS2
660
65.5
29.3
0.15
14.9
11400
6
26KCS3
660
88.5
34.6
0.18
18.6
14770
9
26KCS4
660
136.3
37.8
0.24
24.6
22310
12
26KCS5
660
178.1
40.9
0.30
30.5
28760
12
28KCS2
711
70.7
30.6
0.15
15.6
13310
6
28KCS3
711
95.6
35.5
0.18
18.6
17230
9
28KCS4
711
147.2
37.8
0.24
24.6
26050
12
28KCS5
711
192.5
40.9
0.30
30.5
33630
12
30KCS3
762
102.6
35.5
0.19
19.3
19890
9
30KCS4
762
158.2
37.8
0.24
24.6
30050
12
30KCS5
762
207.1
40.9
0.31
31.3
38870
12
*MAXIMUM UNIFORMLY DISTRIBUTED LOAD CAPACITY IS 8020 NEWTONS/METER AND SINGLE CONCENTRATED
LOAD CANNOT EXCEED SHEAR CAPACITY
**DOES NOT INCLUDE ACCESSORIES
JOIST
DESIGNATION
DEPTH
(mm)
MOMENT
CAPACITY*
(kN-m)
SHEAR
CAPACITY*
(kN)
47
APPROX. WEIGHT**
GROSS
MOMENT OF
INERTIA (cm 4 )
48
STANDARD SPECIFICATIONS
FOR LONGSPAN STEEL JOISTS, LH-SERIES AND
DEEP LONGSPAN STEEL JOISTS, DLH-SERIES
Adopted by the Steel Joist Institute February 15, 1978
Revised to November 10, 2003 - Effective March 01, 2005
SECTION 100.
SECTION 102.
SCOPE
MATERIALS
102.1 STEEL
The steel used in the manufacture of chord and web sections shall conform to one of the following ASTM
Specifications:
Carbon Structural Steel, ASTM A36/A36M.
SECTION 101.
DEFINITION
The design of LH- and DLH-Series joist chord and web sections shall be based on a yield strength of at least 36 ksi
(250 MPa), but not greater than 50 ksi (345 MPa). Steel
used for LH- and DLH-Series joist chord or web sections
shall have a minimum yield strength determined in accordance with one of the procedures specified in Section 102.2,
which is equal to the yield strength assumed in the design.
LH- and DLH-Series Joists shall be designed in accordance
with these specifications to support the loads given in the
Standard Load Tables for Longspan and Deep Longspan
Steel Joists, LH- and DLH-Series, attached hereto.
Steel, Sheet, Cold-Rolled, Carbon, Structural, HighStrength Low-Alloy and High-Strength Low-Alloy with
Improved Formability, ASTM A1008/A1008M
Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability, ASTM A1011/A1011M
or shall be of suitable quality ordered or produced to other
than the listed specifications, provided that such material in
the state used for final assembly and manufacture is weldable
and is proved by tests performed by the producer or manufacturer to have the properties specified in Section 102.2.
* The term Yield Strength as used herein shall designate the yield level of a material as determined by the
applicable method outlined in paragraph 13.1, Yield
Point and in paragraph 13.2, Yield Strength, of
ASTM Standard A370, Standard Test Methods and
Definitions for Mechanical Testing of Steel Products,
or as specified in Section 102.2 of this Specification.
49
b) For connected members both having a specified minimum yield strength of 36 ksi (250 MPa) or one having a
specified minimum yield strength of 36 ksi (250 MPa),
and the other having a specified minimum yield strength
greater than 36 ksi (250 MPa).
102.4 PAINT
The standard shop paint is intended to protect the steel for only
a short period of exposure in ordinary atmospheric conditions
and shall be considered an impermanent and provisional coating.
a) The yield strength calculated from the test data shall equal
or exceed the design yield strength.
SECTION 103.
DESIGN AND
MANUFACTURE
103.1 METHOD
Joists shall be designed in accordance with these specifications as simply supported, uniformly loaded trusses supporting
a floor or roof deck so constructed as to brace the top chord of
the joists against lateral buckling. Where any applicable
design feature is not specifically covered herein, the design
shall be in accordance with the following specifications:
d) If any test specimen fails to pass the requirements of subparagraphs (a), (b), or (c) above, as applicable, two retests
shall be made of specimens from the same lot. Failure of
one of the retest specimens to meet such requirements
shall be the cause for rejection of the lot represented by the
specimens.
Design Basis:
50
1.4D
1.2D + 1.6 (L, or Lr, or S, or R)
4.71
ASD:
E
QFy
QFy
When load combinations are not specified to the joist manufacturer, the required stress shall be computed based on
the load combinations as follows:
Fcr = Q 0.658
Fe
Fy
(103.2-3)
D + (L, or Lr, or S, or R)
> 4.71
E
QFy
Where:
D = dead load due to the weight of the structural elements
and the permanent features of the structure
Fcr = 0.877Fe
(103.2-4)
S = snow load
R = load due to initial rainwater or ice exclusive of the
ponding contribution
Fe =
When special loads are specified and the specifying professional does not provide the load combinations, the provisions of ASCE 7, Minimum Design Loads for Buildings and
Other Structures shall be used for LRFD and ASD load
combinations.
2 E
2
Kl
(103.2-5)
r
For hot-rolled sections, Q is the full reduction factor for
slender compression elements.
(103.2-6)
(103.2-7)
In the above equations, l is taken as the distance in inches (millimeters) between panel points for the chord members and the appropriate length for web members, and r
is the corresponding least radius of gyration of the member or any component thereof. E is equal to 29,000 ksi
(200,000 MPa).
fu
required stress
ksi (MPa)
Fn
nominal stress
ksi (MPa)
resistance factor
Fn
design stress
required stress
ksi (MPa)
Fn
nominal stress
ksi (MPa)
safety factor
Fn / =
allowable stress
Stresses:
(a) Tension: t = 0.90 (LRFD) t = 1.67 (ASD)
For Chords: Fy = 50 ksi (345 MPa)
For Webs: Fy = 50 ksi (345 MPa), or Fy = 36 ksi (250 MPa)
Design Stress = 0.9Fy (LRFD)
(103.2-1)
(103.2-2)
51
(103.2-8)
(103.2-9)
The effective slenderness ratio, K l/r *, to be used in calculating the nominal stresses Fcr and F'e, is the largest value
as determined from Table 103.3-1, Parts B and C.
(103.2-10)
(103.2-11)
(103.2-12)
(103.2-13)
(103.2-14)
* See P.N. Chod and T. V. Galambos, Compression
Chords Without Fillers in Longspan Steel Joists,
Research Report No. 36, June 1975 Structural
Division, Civil Engineering Department, Washington
University, St. Louis, MO.
LRFD: w = 0.75
Design Shear Strength =
Rn = wFnw A = 0.45Fexx A
(103.2-15)
ASD: w = 2.0
Allowable Shear Strength =
Rn/ w = FnwA/ w = 0.3Fexx A
(103.2-16)
52
TABLE 103.3-1
MAXIMUM AND EFFECTIVE SLENDERNESS RATIOS
I
1.0 l/ry
1.0 ls /rz
1.0 l/rz
1.0 l/rx
1.0 l/ry
1.0 l/rx
1.0 l/rx
1.0 l/rx
53
103.4 MEMBERS
(a) Chords
The bottom chord shall be designed as an axially loaded
tension member.
For ASD:
at the panel point:
fa + fb 0.6Fy
The top chord shall be designed as a continuous member subject to combined axial and bending stresses and
shall be so proportioned that
fa 8
+
Fa 9
For LRFD:
for
8
fau
+
cFcr 9
for
for
Q bFy
fa
+
2Fa
Cmfbu
fau
1 F'
c e
1.67fa
F'e
(103.4-1)
fau
0.2,
cFcr
1.0
(103.4-2)
fa
0.2,
Fa
Cmfb
(103.4-4)
QFb
1.0
(103.4-5)
1.0
(103.4-6)
fa
< 0.2,
Fa
Cmfb
1
1.67fa
F'e
QFb
fau
+
2c Fcr
fau
< 0.2,
cFcr
Cmfbu
1
fau
cF'e
1.0
(103.4-3)
Q bFy
Kl
rx
54
(c) Depth
Joists may have either parallel chords or a top chord slope
of 1/8 inch per foot (1:96). The depth, for the purpose of
design, in all cases shall be the depth at mid-span.
The agency shall arrange for visual inspection to determine that welds meet the acceptance standards of
Section 103.5(a)(1). Ultrasonic, X-Ray, and magnetic
particle testing are inappropriate for joists due to the
configurations of the components and welds.
(d) Eccentricity
Members connected at a joint shall have their center of
gravity lines meet at a point, if practical. Eccentricity on
either side of the neutral axis of chord members may be
neglected when it does not exceed the distance between
the neutral axis and the back of the chord. Otherwise,
provision shall be made for the stresses due to eccentricity. Ends of joists shall be proportioned to resist bending produced by eccentricity at the support.
(b) Strength
(1) Joint Connections Joint connections shall develop
the maximum force due to any of the design loads, but
not less than 50 percent of the strength of the member in tension or compression, whichever force is the
controlling factor in the selection of the member.
(2) Shop Splices - Shop splices may occur at any point
in chord or web members. Splices shall be designed
for the member force but not less than 50 percent of
the member strength. Members containing a butt
weld splice shall develop an ultimate tensile force of
at least 57 ksi (393 MPa) times the full design area
of the chord or web. The term member shall be
defined as all component parts comprising the chord
or web, at the point of splice.
In those cases where a single angle compression member is attached to the outside of the stem of a tee or double angle chord, due consideration shall be given to
eccentricity.
(e) Extended Ends
Extended top chords or full depth cantilever ends require
the special attention of the specifying professional. The
magnitude and location of the loads to be supported,
deflection requirements, and proper bracing shall be
clearly indicated on the structural drawings.
103.5 CONNECTIONS
(a) Methods
Joist connections and splices shall be made by attaching
the members to one another by arc or resistance welding
or other accredited methods.
103.6 CAMBER
Joists shall have approximate cambers in accordance with
the following:
TABLE 103.6-1
Top Chord Length
Approximate Camber
20'-0"
(6096 mm)
1/4"
(6 mm)
30'-0"
(9144 mm)
3/8"
(10 mm)
40'-0"
(12192 mm)
5/8"
(16 mm)
50'-0"
(15240 mm)
1"
(25 mm)
60'-0"
(18288 mm)
1 1/2"
(38 mm)
70'-0"
(21336 mm)
2"
(51 mm)
80'-0"
(24384 mm)
2 3/4"
(70 mm)
90'-0"
(27432 mm)
3 1/2"
(89 mm)
100'-0"
(30480 mm)
4 1/4"
(108 mm)
110'-0"
(33528 mm)
5"
(127 mm)
120'-0"
(36576 mm)
6"
(152 mm)
130'-0"
(39621 mm)
7"
(178 mm)
140'-0"
(42672 mm)
8"
(203 mm)
144'-0"
(43890 mm)
8 1/2"
(216 mm)
g) Weld spatter that does not interfere with paint coverage is acceptable.
(2) Welding Program
Manufacturers shall have a program for establishing
weld procedures and operator qualification, and for
weld sampling and testing.
The specifying professional shall give consideration to coordinating joist camber with adjacent framing.
55
SECTION 104.
(b) Steel
APPLICATION
104.1 USAGE
Due consideration of the end reactions and all other vertical and lateral forces shall be taken by the specifying
professional in the design of the steel support.
The ends of LH- or DLH-Series Joists shall extend a distance of not less than 4 inches (102 millimeters) over the
steel supports. Where it is deemed necessary to butt
opposite joists over a narrow steel support with bearing
less than that noted above, special ends must be specified, and such ends shall have positive attachment to the
support, either by bolting or welding.
104.5 BRIDGING
Top and bottom chord bridging is required and shall consist
of one or both of the following types.
(a) Horizontal
Horizontal bridging lines shall consist of continuous horizontal steel members. The l/r of the bridging member
shall not exceed 300, where l is the distance in inches
(millimeters) between attachments and r is the least
radius of gyration of the bridging member.
104.2 SPAN
(b) Diagonal
The clear span of a joist shall not exceed 24 times its depth.
The term Span as used herein is defined as the clear span
plus 8 inches (203 millimeters).
104.3 DEPTH
The nominal depth of sloping chord joists shall be the depth at
mid-span. The standard slope of the top chord shall be 1/8
inch per foot (1:96).
For spans up through 60 feet (18288 mm), welded horizontal bridging may be used except where the row of bridging
56
Ends of LH- and DLH-Series Joists resting on steel bearing plates on masonry or structural concrete shall be
attached thereto with a minimum of two 1/4 inch (6 millimeters) fillet welds 2 inches (51 millimeters) long, or
with two 3/4 inch (19 millimeters) ASTM A307 bolts (minimum), or the equivalent.
(b) Steel
Ends of LH- and DLH-Series Joists resting on steel supports shall be attached thereto with a minimum of two 1/4
inch (6 millimeters) fillet welds 2 inches (51 millimeters)
long, or with two 3/4 inch (19 millimeters) ASTM A307
bolts, or the equivalent. When LH/DLH series joists are
used to provide lateral stability to the supporting member, the final connection shall be made by welding or as
designated by the specifying professional.
Table 104.5-1
LH-DLH
SECTION*
NUMBER
MAX. SPACING
OF LINES OF
TOP CHORD
BRIDGING
NOMINAL**
HORIZONTAL
BRACING
FORCE
lbs
(N)
(c) Uplift
Where uplift forces are a design consideration, roof joists
shall be anchored to resist such forces (Refer to Section
104.12).
02,03,04
400
(1779)
05,06
500
(2224)
07,08
650
(2891)
09,10
800
(3558)
11,12
1000
(4448)
13,14
1200
(5337)
15,16
1600
(7117)
17
1800
(8006)
18,19
2000
(8896)
(a) Material
Floor and roof decks may consist of cast-in-place or precast concrete or gypsum, formed steel, wood, or other
suitable material capable of supporting the required load
at the specified joist spacing.
(e) Connections
(b) Thickness
(d) Bearing
Slabs or decks shall bear uniformly along the top chords
of the joists.
57
104.10 DEFLECTION
(e) Attachments
The spacing of attachments along the top chord shall not
exceed 36 inches (914 millimeters). Such attachments
of the slab or deck to the top chords of joists shall be
capable of resisting the following forces:
The deflection due to the design live load shall not exceed
the following:
Floors: 1/360 of span.
Roofs: 1/360 of span where a plaster ceiling is attached
or suspended.
Table 104.9-1
SECTION*
NUMBER
NOMINAL**
FORCE REQUIRED
02 to 04 incl.
05 to 09 incl.
10 to 17 incl.
18 and 19
104.11 PONDING*
Where wood nailers are used, such nailers in conjunction with deck or slab shall be firmly attached to the top
chords of the joists in conformance with Section
104.9(e).
104.12 UPLIFT
Where uplift forces due to wind are a design requirement,
these forces must be indicated on the contract drawings in
terms of NET uplift in pounds per square foot (Pascals). The
contract documents shall indicate if the net uplift is based on
ASD or LRFD. When these forces are specified, they must
be considered in the design of joists and/or bridging. A single line of bottom chord bridging must be provided near the
first bottom chord panel points whenever uplift due to wind
forces is a design consideration.*
104.13 INSPECTION
Joists shall be inspected by the manufacturer before shipment to verify compliance of materials and workmanship
with the requirements of these specifications. If the purchaser wishes an inspection of the steel joists by someone
other than the manufacturers own inspectors, they may
reserve the right to do so in their Invitation to Bid or the
accompanying Job Specifications.
58
SECTION 105.*
ERECTION STABILITY
AND HANDLING
8) After the joist is straightened and plumbed, and all bridging is completely installed and anchored, the ends of the
joists shall be fully connected to the supports in accordance with Section 104.7- End Anchorage.
(b) Landing and Placing Loads
3) Where the span of the steel joist is within the Red shaded area of the Load Table, the following shall apply:
59
(d) Handling
Particular attention should be paid to the erection of
Longspan and Deep Longspan Steel Joists. Care shall
be exercised at all times to avoid damage to the joists
and accessories.
Each joist shall be adequately braced laterally before
any loads are applied. If lateral support is provided by
bridging, the bridging lines as defined in Section 105(a),
paragraphs 2, 3, 4 and 5, must be anchored to prevent
lateral movement.
(e) Fall Arrest Systems
Steel joists shall not be used as anchorage points for a
fall arrest system unless written approval to do so is
obtained from a qualified person (2).
(2)
60
Where the joist span is in the RED SHADED area of the load
table, the row of bridging nearest the midspan shall be diagonal bridging with bolted connections at chords and intersection.
Hoisting cables shall not be released until this row of bolted
diagonal bridging is completely installed.
Where the joist span is in the BLUE SHADED area of the
load table, all rows of bridging shall be diagonal bridging
with bolted connections at chords and intersection. Hoisting
cables shall not be released until the two rows of bridging
nearest the third points are completely installed.
The RED figures in this load table are the unfactored, nominal
LIVE loads per linear foot of joist which will produce an approximate deflection of 1/360 of the span. LIVE loads which will
produce a deflection of 1/240 of the span may be obtained by
multiplying the RED figures by 1.5. In no case shall the TOTAL
load capacity of the joists be exceeded.
LRFD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
18LH02
Approx. Wt Depth
in Lbs. Per
in
Linear Ft
inches
(Joists only)
10
18
SAFE LOAD*
in Lbs.
Between
21-24
12000
18LH03
11
18
13300
18LH04
12
18
15500
18LH05
15
18
17500
18LH06
15
18
20700
18LH07
17
18
21500
18LH08
19
18
22400
18LH09
21
18
24000
20LH02
10
20
22-24
11300
20LH03
11
20
12000
20LH04
12
20
14700
20LH05
14
20
15800
20LH06
15
20
21100
20LH07
17
20
22500
20LH08
19
20
23200
20LH09
21
20
25400
20LH10
23
20
27400
26
663
284
739
317
856
367
972
414
1123
469
1213
513
1264
534
1351
571
26
655
303
694
333
849
406
913
437
1186
561
1267
599
1309
619
1429
675
1542
724
27
627
259
700
289
802
329
921
378
1044
419
1170
476
1218
496
1302
527
27
646
298
687
317
837
386
903
416
1144
521
1221
556
1263
575
1377
626
1486
673
28
586
234
657
262
750
296
871
345
972
377
1089
428
1176
462
1257
491
28
615
274
678
302
792
352
892
395
1084
477
1179
518
1219
536
1329
581
1434
626
29
550
212
613
236
703
266
814
311
907
340
1017
386
1137
427
1215
458
29
582
250
651
280
744
320
856
366
1018
427
1140
484
1177
500
1284
542
1386
585
61
30
517
193
573
213
660
242
762
282
849
307
952
349
1075
387
1174
418
30
547
228
621
258
700
291
816
337
952
386
1066
438
1140
468
1242
507
1341
545
31
486
175
538
194
619
219
714
256
796
280
892
317
1020
351
1138
380
31
516
208
592
238
660
265
769
308
894
351
1000
398
1083
428
1203
475
1297
510
32
33
34
35
36
459 433 409 388 367
160 147 135 124 114
505 475 448 424 400
177 161 148 136 124
582 547 516 487 462
200 182 167 153 141
672 631 595 562 532
233 212 195 179 164
748 705 664 627 594
254 232 212 195 180
838 789 744 703 666
288 264 241 222 204
961 906 856 810 768
320 292 267 246 226
1069 1006 949 897 849
346 316 289 266 245
32
33
34
35
36
37
487 460 436 412 393 373
190 174 160 147 136 126
558 528 499 474 448 424
218 200 184 169 156 143
624 589 558 529 502 477
243 223 205 189 174 161
726 687 651 616 585 556
281 258 238 219 202 187
840 790 745 703 666 631
320 292 267 246 226 209
940 885 834 789 745 706
362 331 303 278 256 236
1030 981 931 882 837 795
395 365 336 309 285 262
1167 1132 1068 1009 954 904
437 399 366 336 309 285
1258 1221 1186 1122 1060 1005
479 448 411 377 346 320
38
355
117
403
133
454
149
529
173
598
192
670
218
754
242
858
264
954
296
39
337
108
382
123
433
139
504
161
568
178
637
202
718
225
816
244
906
274
40
322
101
364
114
412
129
481
150
541
165
606
187
685
209
775
227
862
254
LRFD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
24LH03
Approx. Wt Depth
in Lbs. Per
in
Linear Ft.
inches
(Joists only)
11
24
SAFELOAD*
in Lbs.
Between
28-32
17250
24LH04
12
24
21150
24LH05
13
24
22650
24LH06
16
24
30450
24LH07
17
24
33450
24LH08
18
24
35700
24LH09
21
24
42000
24LH10
23
24
44400
24LH11
25
24
46800
28LH05
13
28
33-40
21000
28LH06
16
28
27900
28LH07
17
28
31500
28LH08
18
28
33750
28LH09
21
28
41550
28LH10
23
28
45450
28LH11
25
28
48750
28LH12
27
28
53550
28LH13
30
28
55800
32LH06
14
32
38-46 47-48
25050 25050
32LH07
16
32
28200 28200
32LH08
17
32
30600 30600
32LH09
21
32
38400 38400
32LH10
21
32
42450 42450
32LH11
24
32
46500 46500
32LH12
27
32
54600 54600
32LH13
30
32
60900 60900
32LH14
33
32
62700 62700
32LH15
35
32
64800 64800
36LH07
16
36
42-46 47-56
25200 25200
36LH08
18
36
27750 27750
36LH09
21
36
35550 35550
36LH10
21
36
39150 39150
36LH11
23
36
42750 42750
36LH12
25
36
51150 51150
36LH13
30
36
60150 60150
36LH14
36
36
66300 66300
36LH15
36
36
69900 69900
34
508
226
597
265
669
297
868
382
957
421
1015
447
1212
530
1284
559
1350
588
42
484
205
643
270
726
305
775
325
958
400
1056
439
1143
475
1255
520
1311
543
50
489
199
549
223
595
242
747
302
825
332
903
363
1068
428
1201
480
1239
495
1279
511
58
424
168
466
185
597
235
660
260
720
283
862
338
1012
395
1132
434
1192
464
35
504
218
568
246
660
285
832
356
919
393
973
416
1177
501
1248
528
1312
555
43
465
192
618
253
696
285
744
305
918
375
1018
414
1104
448
1227
496
1281
518
51
472
189
529
211
574
229
720
285
796
315
870
343
1032
406
1177
461
1215
476
1255
492
59
411
160
453
176
579
224
639
248
697
269
835
322
981
376
1093
412
1171
448
36
484
204
540
227
628
264
795
331
882
367
933
388
1146
460
1213
500
1276
525
44
445
180
592
238
667
267
712
285
879
351
976
388
1066
423
1200
476
1252
495
52
456
179
511
200
553
216
694
270
768
297
840
325
996
384
1156
444
1192
458
1231
473
60
399
153
439
168
561
214
619
236
676
257
810
307
951
359
1059
392
1153
434
37
460
188
514
210
598
244
756
306
847
343
895
362
1096
424
1182
474
1243
498
45
429
169
568
223
640
251
684
268
844
329
937
364
1023
397
1173
454
1224
472
53
441
169
493
189
535
205
670
256
742
282
811
308
961
364
1113
420
1170
440
1207
454
61
387
146
426
160
544
204
601
225
657
246
784
292
922
342
1024
373
1116
413
62
38
439
175
490
195
570
226
720
284
811
320
858
338
1044
393
1152
439
1210
472
46
412
159
546
209
615
236
657
252
810
309
900
342
982
373
1149
435
1198
452
54
426
161
477
179
517
194
648
243
717
267
783
292
928
345
1072
397
1149
417
1186
438
62
376
140
414
153
528
195
583
215
637
234
762
279
894
327
991
356
1081
394
39
418
162
468
182
544
210
685
263
774
297
817
314
994
363
1105
406
1180
449
47
397
150
525
197
591
222
630
236
778
291
864
322
943
351
1105
408
1173
433
55
412
153
462
170
499
184
627
230
693
254
757
277
897
327
1035
376
1107
395
1164
422
63
366
134
402
146
513
186
567
206
618
224
739
267
868
312
961
339
1047
375
40
400
152
447
169
520
196
655
245
736
276
780
292
948
337
1053
378
1152
418
48
382
142
505
186
568
209
604
222
748
274
831
303
907
331
1063
383
1149
415
56
399
145
447
162
483
175
606
219
667
240
732
263
867
311
999
354
1069
374
1144
407
64
355
128
390
140
499
179
550
197
601
214
717
255
843
298
931
323
1015
358
41
42
43
44
382
366
351
336
141
132
124
116
427
409
393
376
158
148
138
130
496
475
456
436
182
171
160
150
625
598
571
546
228
211
197
184
702
669
639
610
257
239
223
208
745
712
682
652
272
254
238
222
903
861
822
786
313
292
272
254
1002 955
912
873
351
326
304
285
1101 1051 1006 963
388
361
337
315
49
50
51
52
367
355
342
330
133
126
119
113
486
469
451
436
175
166
156
148
547
528
508
490
197
186
176
166
580
556
535
516
209
196
185
175
721
694
669
645
258
243
228
216
799
769
742
715
285
269
255
241
873
841
810
781
312
294
278
263
1023 984
948
913
361
340
321
303
1126 1083 1041 1002
396
373
352
332
57
58
59
60
385
373
363
351
138
131
125
119
432
418
406
393
154
146
140
133
468
453
439
426
167
159
151
144
586
568
550
534
208
198
189
180
645
624
603
583
228
217
206
196
709
687
664
643
251
239
227
216
838
811
786
762
295
281
267
255
964
931
900
871
336
319
304
288
1032 997
964
933
355
337
321
304
1125 1087 1051 1017
393
374
355
338
65
66
67
68
345
336
327
318
122
117
112
107
379
369
358
349
134
128
123
118
484
471
459
445
171
163
157
150
535
520
507
492
188
180
173
165
583
567
552
537
205
196
188
180
696
675
655
636
243
232
222
213
819
796
774
753
285
273
262
251
903
876
850
826
309
295
283
270
984
955
927
900
342
327
312
299
45
322
109
361
122
420
141
522
172
583
195
625
208
751
238
834
266
924
294
53
319
107
421
140
474
158
496
165
622
204
690
228
753
249
880
285
964
314
61
340
114
381
127
412
137
517
172
564
186
624
206
738
243
843
275
903
290
984
322
69
310
103
340
113
433
144
480
159
522
173
618
204
732
240
802
259
874
286
46
310
102
346
114
403
132
501
161
559
182
600
196
720
223
799
249
885
276
54
309
102
406
133
457
150
478
156
601
193
666
215
727
236
849
270
930
297
62
330
108
370
121
400
131
502
164
546
178
604
196
715
232
816
262
874
276
952
306
70
301
99
331
109
423
138
466
152
508
166
600
195
712
231
780
247
850
274
47
298
96
333
107
387
124
480
152
535
171
576
184
690
209
766
234
850
259
55
298
97
393
126
442
142
462
148
580
183
643
204
702
223
819
256
897
281
63
321
104
360
116
388
125
487
157
529
169
585
187
694
221
790
249
846
264
924
292
71
294
95
322
104
412
133
454
146
495
159
583
187
694
222
757
237
826
263
48
286
90
321
101
372
117
460
142
514
161
553
173
661
196
735
220
816
243
56
289
92
379
120
427
135
445
140
561
173
622
193
679
212
790
243
865
266
64
312
99
349
111
378
120
472
149
513
162
567
179
673
211
766
238
820
251
895
279
72
286
91
313
100
400
127
442
140
483
153
567
179
676
213
738
228
804
252
LRFD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Approx. Wt
in Lbs. Per
Linear Ft.
Depth
in
inches
40LH08
(Joists Only)
16
40
SAFELOAD*
in Lbs.
Between
47-59 60-64
24900 24900
40LH09
21
40
32700 32700
40LH10
21
40
36000 36000
40LH11
22
40
39300 39300
40LH12
25
40
47850 47850
40LH13
30
40
56400 56400
40LH14
35
40
64500 64500
40LH15
36
40
72150 72150
40LH16
42
40
79500 79500
44LH09
19
44
52-59 60-72
30000 30000
44LH10
21
44
33150 33150
44LH11
22
44
35850 35850
44LH12
25
44
44400 44400
44LH13
30
44
52650 52650
44LH14
31
44
60600 60600
44LH15
36
44
70500 70500
44LH16
42
44
81300 81300
44LH17
47
44
87300 87300
48LH10
21
48
56-59 60-80
30000 30000
48LH11
22
48
32550 32550
48LH12
25
48
41100 41100
48LH13
29
48
49200 49200
48LH14
32
48
58050 58050
48LH15
36
48
66750 66750
48LH16
42
48
76950 76950
48LH17
47
48
86400 86400
66
370
144
484
188
535
207
582
224
708
273
835
320
957
367
1068
408
1194
455
74
397
152
439
168
475
181
589
224
699
265
801
302
934
352
1078
405
1170
438
82
361
136
390
147
493
185
589
221
696
260
799
298
922
343
1035
383
67
361
138
472
180
520
198
567
215
688
261
813
307
930
351
1036
390
1176
441
75
388
146
429
162
465
175
574
215
681
254
780
291
912
339
1051
390
1153
426
83
354
132
382
142
483
179
576
213
681
251
781
287
901
331
1012
371
68
69
70
71
72
73
74
351
342
333
325
316
309
301
132
127
122
117
112
108
104
459
447
436
424
414
403
394
173
166
160
153
147
141
136
507
493
481
469
457
445
435
190
183
176
169
162
156
150
552
537
523
510
498
484
472
207
198
190
183
176
169
163
670
652
636
619
603
588
573
251
241
231
222
213
205
197
792
771
750
730
712
694
676
295
283
271
260
250
241
231
904
880
856
834
813
792
772
336
323
309
297
285
273
263
1006 978
949
924
898
874
850
373
357
342
328
315
302
290
1158 1141 1126 1095 1065 1036 1009
428
416
404
387
371
356
342
76
77
78
79
80
81
82
379
370
363
354
346
339
331
141
136
131
127
122
118
114
418
408
399
390
381
373
364
155
150
144
139
134
130
125
453
442
433
423
414
403
396
168
162
157
151
146
140
136
561
547
534
520
508
496
484
207
200
192
185
179
172
166
666
649
634
619
606
592
579
246
236
228
220
212
205
198
759
739
721
703
685
669
654
279
268
259
249
240
231
223
889
868
847
826
805
786
768
326
314
303
292
281
271
261
1026 1002 978
955
933
912
891
375
362
348
336
324
313
302
1138 1125 1098 1072 1048 1024 1000
415
405
390
376
363
351
338
84
85
86
87
88
89
90
346
339
331
325
318
312
306
127
123
119
116
112
108
105
373
366
358
351
343
337
330
137
133
129
125
120
117
113
472
462
451
442
433
424
415
173
167
161
156
151
147
142
564
552
540
529
517
507
498
206
199
193
187
180
175
170
666
651
637
624
610
598
585
243
234
227
220
212
206
199
765
748
732
717
702
687
672
278
269
260
252
244
236
228
882
864
844
826
810
792
777
320
310
299
289
280
271
263
990
969
948
928
909
889
871
358
346
335
324
314
304
294
75
294
100
384
131
424
144
462
157
559
189
660
223
753
252
828
279
982
329
83
324
110
357
121
387
131
472
160
565
191
637
215
750
252
870
291
978
327
91
300
102
324
110
408
138
487
164
574
193
658
221
760
255
853
285
76
288
97
375
126
414
139
450
151
546
182
643
214
735
243
807
268
957
316
84
316
106
349
117
378
127
462
155
553
185
622
207
732
243
852
282
957
316
92
294
99
318
106
399
133
477
159
562
187
645
214
745
247
837
276
77
280
93
366
122
403
134
439
145
532
176
628
207
717
233
786
258
933
304
85
310
103
342
113
370
123
450
149
541
179
609
200
714
234
832
272
936
305
93
288
96
312
103
391
129
468
154
550
181
633
208
730
239
820
268
78
274
90
358
118
393
129
429
140
519
169
613
199
699
225
766
248
909
292
86
303
99
334
110
363
119
439
144
529
173
594
193
699
227
814
263
915
295
94
282
93
306
100
384
126
459
150
540
176
619
201
715
232
804
260
79
267
86
349
113
382
124
418
135
507
163
598
192
682
216
747
239
886
282
87
297
96
327
106
354
115
430
139
519
167
580
187
682
219
796
255
895
285
95
277
90
300
97
376
122
450
145
529
171
607
195
702
225
787
252
80
261
83
342
109
373
119
409
130
495
157
585
185
666
209
729
230
864
271
88
291
93
321
103
348
111
420
134
507
161
568
181
667
211
780
246
876
276
96
271
87
294
94
369
118
441
141
519
165
595
189
688
218
772
245
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the
shortest clear span shown in the Load Table by the (the
shortest clear span shown in the Load Table + 0.67 feet)2
and divide by (the actual clear span + 0.67 feet) 2. The live
load shall not exceed the safe uniform load.
* The safe factored uniform load for the clear spans shown
in the Safe Load Column is equal to (Safe Load) / (Clear
span + 0.67). (The added 0.67 feet (8 inches) is required
to obtain the proper length on which the Load Tables were
developed).
In no case shall the safe factored uniform load, for clear
spans less than the minimum clear span shown in the Safe
Load Column, exceed the uniform load calculated for the
minimum clear span listed in the Safe Load Column.
63
Where the joist span is in the RED SHADED area of the load
table, the row of bridging nearest the midspan shall be diagonal bridging with bolted connections at chords and intersection. Hoisting cables shall not be released until this row
of bolted diagonal bridging is completely installed.
Where the joist span is in the BLUE SHADED area of the
load table, all rows of bridging shall be diagonal bridging
with bolted connections at chords and intersection. Hoisting
cables shall not be released until the two rows of bridging
nearest the third points are completely installed.
The RED figures in this load table are the nominal LIVE
loads per linear foot of joist which will produce an approximate deflection of 1/360 of the span. LIVE loads which will
produce a deflection of 1/240 of the span may be obtained
by multiplying the RED figures by 1.5. In no case shall the
TOTAL load capacity of the joists be exceeded.
ASD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Depth
in
inches
18LH02
Approx. Wt
in Lbs. Per
Linear Ft
(Joists only)
10
18
SAFE LOAD*
in Lbs.
Between
21-24
12000
18LH03
11
18
13300
18LH04
12
18
15500
18LH05
15
18
17500
18LH06
15
18
20700
18LH07
17
18
21500
18LH08
19
18
22400
18LH09
21
18
24000
20LH02
10
20
22-24
11300
20LH03
11
20
12000
20LH04
12
20
14700
20LH05
14
20
15800
20LH06
15
20
21100
20LH07
17
20
22500
20LH08
19
20
23200
20LH09
21
20
25400
20LH10
23
20
27400
Joist
Designation
27
418
259
467
289
535
329
614
378
696
419
780
476
812
496
868
527
27
431
298
458
317
558
386
602
416
763
521
814
556
842
575
918
626
991
673
28
391
234
438
262
500
296
581
345
648
377
726
428
784
462
838
491
28
410
274
452
302
528
352
595
395
723
477
786
518
813
536
886
581
956
626
64
29
367
212
409
236
469
266
543
311
605
340
678
386
758
427
810
458
29
388
250
434
280
496
320
571
366
679
427
760
484
785
500
856
542
924
585
30
345
193
382
213
440
242
508
282
566
307
635
349
717
387
783
418
30
365
228
414
258
467
291
544
337
635
386
711
438
760
468
828
507
894
545
31
324
175
359
194
413
219
476
256
531
280
595
317
680
351
759
380
31
344
208
395
238
440
265
513
308
596
351
667
398
722
428
802
475
865
510
32
306
160
337
177
388
200
448
233
499
254
559
288
641
320
713
346
32
325
190
372
218
416
243
484
281
560
320
627
362
687
395
778
437
839
479
33
289
147
317
161
365
182
421
212
470
232
526
264
604
292
671
316
33
307
174
352
200
393
223
458
258
527
292
590
331
654
365
755
399
814
448
34
273
135
299
148
344
167
397
195
443
212
496
241
571
267
633
289
34
291
160
333
184
372
205
434
238
497
267
556
303
621
336
712
366
791
411
35
259
124
283
136
325
153
375
179
418
195
469
222
540
246
598
266
35
275
147
316
169
353
189
411
219
469
246
526
278
588
309
673
336
748
377
36
245
114
267
124
308
141
355
164
396
180
444
204
512
226
566
245
36
262
136
299
156
335
174
390
202
444
226
497
256
558
285
636
309
707
346
37
249
126
283
143
318
161
371
187
421
209
471
236
530
262
603
285
670
320
38
237
117
269
133
303
149
353
173
399
192
447
218
503
242
572
264
636
296
39
225
108
255
123
289
139
336
161
379
178
425
202
479
225
544
244
604
274
40
215
101
243
114
275
129
321
150
361
165
404
187
457
209
517
227
575
254
ASD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Approx. Wt
in Lbs. Per
Linear Ft.
(Joists only)
Depth
in
inches
SAFELOAD*
in Lbs.
Between
24LH03
11
24
28-32
11500
24LH04
12
24
14100
24LH05
13
24
15100
24LH06
16
24
20300
24LH07
17
24
22300
24LH08
18
24
23800
24LH09
21
24
28000
24LH10
23
24
29600
24LH11
25
24
31200
28LH05
13
28
33-40
14000
28LH06
16
28
18600
28LH07
17
28
21000
28LH08
18
28
22500
28LH09
21
28
27700
28LH10
23
28
30300
28LH11
25
28
32500
28LH12
27
28
35700
28LH13
30
28
37200
32LH06
14
32
38-46 47-48
16700 16700
32LH07
16
32
18800 18800
32LH08
17
32
20400 20400
32LH09
21
32
25600 25600
32LH10
21
32
28300 28300
32LH11
24
32
31000 31000
32LH12
27
32
36400 36400
32LH13
30
32
40600 40600
32LH14
33
32
41800 41800
32LH15
35
32
43200 43200
36LH07
16
36
42-46 47-56
16800 16800
36LH08
18
36
18500 18500
36LH09
21
36
23700 23700
36LH10
21
36
26100 26100
36LH11
23
36
28500 28500
36LH12
25
36
34100 34100
36LH13
30
36
40100 40100
36LH14
36
36
44200 44200
36LH15
36
36
46600 46600
34
339
226
398
265
446
297
579
382
638
421
677
447
808
530
856
559
900
588
42
323
205
429
270
484
305
517
325
639
400
704
439
762
475
837
520
874
543
50
326
199
366
223
397
242
498
302
550
332
602
363
712
428
801
480
826
495
853
511
58
283
168
311
185
398
235
440
260
480
283
575
338
675
395
755
434
795
464
35
336
218
379
246
440
285
555
356
613
393
649
416
785
501
832
528
875
555
43
310
192
412
253
464
285
496
305
612
375
679
414
736
448
818
496
854
518
51
315
189
353
211
383
229
480
285
531
315
580
343
688
406
785
461
810
476
837
492
59
274
160
302
176
386
224
426
248
465
269
557
322
654
376
729
412
781
448
36
323
204
360
227
419
264
530
331
588
367
622
388
764
460
809
500
851
525
44
297
180
395
238
445
267
475
285
586
351
651
388
711
423
800
476
835
495
52
304
179
341
200
369
216
463
270
512
297
560
325
664
384
771
444
795
458
821
473
60
266
153
293
168
374
214
413
236
451
257
540
307
634
359
706
392
769
434
37
307
188
343
210
399
244
504
306
565
343
597
362
731
424
788
474
829
498
45
286
169
379
223
427
251
456
268
563
329
625
364
682
397
782
454
816
472
53
294
169
329
189
357
205
447
256
495
282
541
308
641
364
742
420
780
440
805
454
61
258
146
284
160
363
204
401
225
438
246
523
292
615
342
683
373
744
413
65
38
293
175
327
195
380
226
480
284
541
320
572
338
696
393
768
439
807
472
46
275
159
364
209
410
236
438
252
540
309
600
342
655
373
766
435
799
452
54
284
161
318
179
345
194
432
243
478
267
522
292
619
345
715
397
766
417
791
438
62
251
140
276
153
352
195
389
215
425
234
508
279
596
327
661
356
721
394
39
279
162
312
182
363
210
457
263
516
297
545
314
663
363
737
406
787
449
47
265
150
350
197
394
222
420
236
519
291
576
322
629
351
737
408
782
433
55
275
153
308
170
333
184
418
230
462
254
505
277
598
327
690
376
738
395
776
422
63
244
134
268
146
342
186
378
206
412
224
493
267
579
312
641
339
698
375
40
267
152
298
169
347
196
437
245
491
276
520
292
632
337
702
378
768
418
48
255
142
337
186
379
209
403
222
499
274
554
303
605
331
709
383
766
415
56
266
145
298
162
322
175
404
219
445
240
488
263
578
311
666
354
713
374
763
407
64
237
128
260
140
333
179
367
197
401
214
478
255
562
298
621
323
677
358
41
255
141
285
158
331
182
417
228
468
257
497
272
602
313
668
351
734
388
49
245
133
324
175
365
197
387
209
481
258
533
285
582
312
682
361
751
396
57
257
138
288
154
312
167
391
208
430
228
473
251
559
295
643
336
688
355
750
393
65
230
122
253
134
323
171
357
188
389
205
464
243
546
285
602
309
656
342
42
244
132
273
148
317
171
399
211
446
239
475
254
574
292
637
326
701
361
50
237
126
313
166
352
186
371
196
463
243
513
269
561
294
656
340
722
373
58
249
131
279
146
302
159
379
198
416
217
458
239
541
281
621
319
665
337
725
374
66
224
117
246
128
314
163
347
180
378
196
450
232
531
273
584
295
637
327
43
234
124
262
138
304
160
381
197
426
223
455
238
548
272
608
304
671
337
51
228
119
301
156
339
176
357
185
446
228
495
255
540
278
632
321
694
352
59
242
125
271
140
293
151
367
189
402
206
443
227
524
267
600
304
643
321
701
355
67
218
112
239
123
306
157
338
173
368
188
437
222
516
262
567
283
618
312
44
224
116
251
130
291
150
364
184
407
208
435
222
524
254
582
285
642
315
52
220
113
291
148
327
166
344
175
430
216
477
241
521
263
609
303
668
332
60
234
119
262
133
284
144
356
180
389
196
429
216
508
255
581
288
622
304
678
338
68
212
107
233
118
297
150
328
165
358
180
424
213
502
251
551
270
600
299
45
215
109
241
122
280
141
348
172
389
195
417
208
501
238
556
266
616
294
53
213
107
281
140
316
158
331
165
415
204
460
228
502
249
587
285
643
314
61
227
114
254
127
275
137
345
172
376
186
416
206
492
243
562
275
602
290
656
322
69
207
103
227
113
289
144
320
159
348
173
412
204
488
240
535
259
583
286
46
207
102
231
114
269
132
334
161
373
182
400
196
480
223
533
249
590
276
54
206
102
271
133
305
150
319
156
401
193
444
215
485
236
566
270
620
297
62
220
108
247
121
267
131
335
164
364
178
403
196
477
232
544
262
583
276
635
306
70
201
99
221
109
282
138
311
152
339
166
400
195
475
231
520
247
567
274
47
199
96
222
107
258
124
320
152
357
171
384
184
460
209
511
234
567
259
55
199
97
262
126
295
142
308
148
387
183
429
204
468
223
546
256
598
281
63
214
104
240
116
259
125
325
157
353
169
390
187
463
221
527
249
564
264
616
292
71
196
95
215
104
275
133
303
146
330
159
389
187
463
222
505
237
551
263
48
191
90
214
101
248
117
307
142
343
161
369
173
441
196
490
220
544
243
56
193
92
253
120
285
135
297
140
374
173
415
193
453
212
527
243
577
266
64
208
99
233
111
252
120
315
149
342
162
378
179
449
211
511
238
547
251
597
279
72
191
91
209
100
267
127
295
140
322
153
378
179
451
213
492
228
536
252
ASD
STANDARD LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Approx. Wt Depth
in Lbs. Per
in
Linear Ft.
inches
SAFELOAD*
in Lbs.
Between
40LH08
(Joists Only)
16
40
47-59
16600
60-64
16600
40LH09
21
40
21800
21800
40LH10
21
40
24000
24000
40LH11
22
40
26200
26200
40LH12
25
40
31900
31900
40LH13
30
40
37600
37600
40LH14
35
40
43000
43000
40LH15
36
40
48100
48100
40LH16
42
40
53000
53000
44LH09
19
44
52-59
20000
60-72
20000
44LH10
21
44
22100
22100
44LH11
22
44
23900
23900
44LH12
25
44
29600
29600
44LH13
30
44
35100
35100
44LH14
31
44
40400
40400
44LH15
36
44
47000
47000
44LH16
42
44
54200
54200
44LH17
47
44
58200
58200
48LH10
21
48
56-59
20000
60-80
20000
48LH11
22
48
21700
21700
48LH12
25
48
27400
27400
48LH13
29
48
32800
32800
48LH14
32
48
38700
38700
48LH15
36
48
44500
44500
48LH16
42
48
51300
51300
48LH17
47
48
57600
57600
66
247
144
323
188
357
207
388
224
472
273
557
320
638
367
712
408
796
455
74
265
152
293
168
317
181
393
224
466
265
534
302
623
352
719
405
780
438
82
241
136
260
147
329
185
393
221
464
260
533
298
615
343
690
383
67
241
138
315
180
347
198
378
215
459
261
542
307
620
351
691
390
784
441
75
259
146
286
162
310
175
383
215
454
254
520
291
608
339
701
390
769
426
83
236
132
255
142
322
179
384
213
454
251
521
287
601
331
675
371
68
234
132
306
173
338
190
368
207
447
251
528
295
603
336
671
373
772
428
76
253
141
279
155
302
168
374
207
444
246
506
279
593
326
684
375
759
415
84
231
127
249
137
315
173
376
206
444
243
510
278
588
320
660
358
69
228
127
298
166
329
183
358
198
435
241
514
283
587
323
652
357
761
416
77
247
136
272
150
295
162
365
200
433
236
493
268
579
314
668
362
750
405
85
226
123
244
133
308
167
368
199
434
234
499
269
576
310
646
346
70
222
122
291
160
321
176
349
190
424
231
500
271
571
309
633
342
751
404
78
242
131
266
144
289
157
356
192
423
228
481
259
565
303
652
348
732
390
86
221
119
239
129
301
161
360
193
425
227
488
260
563
299
632
335
71
217
117
283
153
313
169
340
183
413
222
487
260
556
297
616
328
730
387
79
236
127
260
139
282
151
347
185
413
220
469
249
551
292
637
336
715
376
87
217
116
234
125
295
156
353
187
416
220
478
252
551
289
619
324
72
211
112
276
147
305
162
332
176
402
213
475
250
542
285
599
315
710
371
80
231
122
254
134
276
146
339
179
404
212
457
240
537
281
622
324
699
363
88
212
112
229
120
289
151
345
180
407
212
468
244
540
280
606
314
73
206
108
269
141
297
156
323
169
392
205
463
241
528
273
583
302
691
356
81
226
118
249
130
269
140
331
172
395
205
446
231
524
271
608
313
683
351
89
208
108
225
117
283
147
338
175
399
206
458
236
528
271
593
304
74
201
104
263
136
290
150
315
163
382
197
451
231
515
263
567
290
673
342
82
221
114
243
125
264
136
323
166
386
198
436
223
512
261
594
302
667
338
90
204
105
220
113
277
142
332
170
390
199
448
228
518
263
581
294
75
196
100
256
131
283
144
308
157
373
189
440
223
502
252
552
279
655
329
83
216
110
238
121
258
131
315
160
377
191
425
215
500
252
580
291
652
327
91
200
102
216
110
272
138
325
164
383
193
439
221
507
255
569
285
76
192
97
250
126
276
139
300
151
364
182
429
214
490
243
538
268
638
316
84
211
106
233
117
252
127
308
155
369
185
415
207
488
243
568
282
638
316
92
196
99
212
106
266
133
318
159
375
187
430
214
497
247
558
276
77
187
93
244
122
269
134
293
145
355
176
419
207
478
233
524
258
622
304
85
207
103
228
113
247
123
300
149
361
179
406
200
476
234
555
272
624
305
93
192
96
208
103
261
129
312
154
367
181
422
208
487
239
547
268
78
183
90
239
118
262
129
286
140
346
169
409
199
466
225
511
248
606
292
86
202
99
223
110
242
119
293
144
353
173
396
193
466
227
543
263
610
295
94
188
93
204
100
256
126
306
150
360
176
413
201
477
232
536
260
79
178
86
233
113
255
124
279
135
338
163
399
192
455
216
498
239
591
282
87
198
96
218
106
236
115
287
139
346
167
387
187
455
219
531
255
597
285
95
185
90
200
97
251
122
300
145
353
171
405
195
468
225
525
252
80
174
83
228
109
249
119
273
130
330
157
390
185
444
209
486
230
576
271
88
194
93
214
103
232
111
280
134
338
161
379
181
445
211
520
246
584
276
96
181
87
196
94
246
118
294
141
346
165
397
189
459
218
515
245
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the
shortest clear span shown in the Load Table by the (the
shortest clear span shown in the Load Table + 0.67 feet)2
and divide by (the actual clear span + 0.67 feet)2. The live
load shall not exceed the safe uniform load.
* The safe uniform load for the clear spans shown in the Safe
Load Column is equal to (Safe Load) / (Clear span + 0.67).
(The added 0.67 feet (8 inches) is required to obtain the
proper length on which the Load Tables were developed).
In no case shall the safe uniform load, for clear spans less
than the minimum clear span shown in the Safe Load
Column, exceed the uniform load calculated for the minimum
clear span listed in the Safe Load Column.
66
The RED figures in this load table are the unfactored, nominal
LIVE loads per linear foot of joist which will produce an approximate deflection of 1/360 of the span. LIVE loads which will
produce a deflection of 1/240 of the span may be obtained by
multiplying the RED figures by 1.5. In no case shall the TOTAL
load capacity of the joists be exceeded.
LRFD
STANDARD LOAD TABLE FOR DEEP LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Approx. Wt Depth SAFELOAD*
Joist
in Lbs.
in
Designation in Lbs. Per
Linear Ft
inches Between
(Joists only)
89
61-88
40050
52DLH10
25
52
447
171
43950
52DLH11
26
52
490
187
49050
52DLH12
29
52
547
204
59550
52DLH13
34
52
664
247
68100
52DLH14
39
52
760
276
76500
52DLH15
42
52
853
311
82500
52DLH16
45
52
921
346
94950
52DLH17
52
52
1059
395
97
66-96
56DLH11
26
56
42150
432
169
56DLH12
30
56
48450
496
184
56DLH13
34
56
58650
601
223
56DLH14
39
56
66300
679
249
56DLH15
42
56
75750
777
281
56DLH16
46
56
81750
838
313
56DLH17
51
56
94200
964
356
91
427
159
469
174
523
191
636
231
729
258
817
291
882
324
1014
369
99
415
158
477
173
579
209
652
234
747
264
805
294
927
335
92
418
154
459
169
513
185
621
224
714
249
799
282
862
314
991
357
100
408
153
468
168
568
204
640
228
732
256
789
285
907
325
93
409
150
448
164
501
179
609
216
699
242
783
272
844
304
970
346
101
400
149
459
163
558
197
628
221
717
248
774
277
891
316
67
94
400
145
439
158
490
173
595
209
685
234
766
264
826
294
951
335
102
393
145
450
158
547
191
616
214
703
242
759
269
873
306
95
391
140
430
153
480
168
583
203
670
227
750
256
810
285
930
324
103
385
140
442
153
537
186
604
209
690
234
744
262
856
298
96
384
136
421
149
471
163
571
197
657
220
735
247
792
276
912
315
104
379
136
433
150
526
181
594
202
676
228
730
254
840
289
97
376
132
412
144
460
158
559
191
645
213
720
240
777
267
892
304
105
372
133
426
145
516
175
582
196
664
221
717
247
823
281
98
369
128
405
140
451
153
549
185
631
207
705
233
760
260
874
296
106
366
129
417
141
507
171
571
190
651
215
703
240
808
273
99
361
124
396
135
442
149
537
180
619
201
691
226
745
252
858
286
107
358
125
409
137
496
166
562
186
639
209
690
233
793
266
100
354
120
388
132
433
144
526
174
607
194
676
219
730
245
840
279
108
352
122
402
133
487
161
552
181
628
204
678
227
780
258
101
346
116
381
128
426
140
516
170
595
189
664
213
717
237
823
270
109
346
118
394
130
478
157
541
175
616
198
666
221
765
251
102
340
114
373
124
417
135
507
164
585
184
651
207
702
230
808
263
110
340
115
388
126
471
152
532
171
604
192
654
214
751
245
103
334
110
366
120
409
132
496
159
573
178
639
201
688
224
792
255
111
334
113
381
123
462
149
523
167
594
188
642
209
738
238
104
327
107
360
117
402
128
487
155
562
173
627
195
676
217
777
247
112
328
110
373
119
454
145
514
162
583
182
630
204
724
231
LRFD
STANDARD LOAD TABLE LONGSPAN STEEL JOISTS, LRFD DLH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Approx. Wt Depth
Joist
in
Designation in Lbs. Per
Linear Ft inches
(Joists only)
60DLH12
29
60
SAFE LOAD*
in Lbs.
Between
70-99 100-104
46650
46650
60DLH13
35
60
56700
56700
60DLH14
40
60
63000
63000
60DLH15
43
60
73950
73950
60DLH16
46
60
81300
81300
60DLH17
52
60
93450
93450
60DLH18
59
60
107850
107850
64DLH12
31
64
75-99 100-112
45000
45000
64DLH13
34
64
54600
54600
64DLH14
40
64
62550
62550
64DLH15
43
64
71700
71700
64DLH16
46
64
80700
80700
64DLH17
52
64
93000
93000
64DLH18
59
64
107400
107400
68DLH13
37
68
80-99 100-120
52500
52500
68DLH14
40
68
60450
60450
68DLH15
44
68
67800
67800
68DLH16
49
68
80400
80400
68DLH17
55
68
90600
90600
68DLH18
61
68
104850
104850
68DLH19
67
68
120750
120750
72DLH14
41
72
84-99 100-128
58800
58800
72DLH15
44
72
67350
67350
72DLH16
50
72
77850
77850
72DLH17
56
72
87600
87600
72DLH18
59
72
102600
102600
72DLH19
70
72
120300
120300
106
433
163
526
197
586
210
687
248
756
277
868
315
1002
357
114
388
150
472
181
540
193
621
228
699
254
804
290
928
328
122
426
168
490
179
547
201
649
236
733
268
849
304
976
344
130
447
167
513
187
592
219
667
250
780
283
913
321
107
426
158
517
191
574
205
675
242
741
269
853
306
984
346
115
382
146
465
176
531
189
610
223
687
248
790
283
912
320
123
418
164
483
175
540
196
640
230
721
262
835
297
961
336
131
441
163
504
183
585
214
657
245
768
276
900
313
108
418
154
508
187
564
199
663
235
727
262
837
298
966
337
116
376
142
457
171
523
184
600
217
675
242
777
275
897
311
124
412
159
475
171
531
191
630
225
711
256
823
289
946
328
132
435
159
496
178
576
209
648
239
757
270
886
306
109
411
150
499
181
555
193
651
228
714
255
822
290
948
327
117
370
138
450
168
514
179
591
211
664
235
763
268
880
304
125
406
155
468
167
522
187
619
219
700
249
810
283
931
320
133
427
155
489
174
567
205
639
233
745
265
873
300
110
405
146
490
176
544
189
640
223
702
247
807
283
931
319
118
364
135
442
163
505
174
580
206
652
229
751
262
867
296
126
400
152
462
163
514
182
610
214
690
244
798
276
916
313
134
421
152
483
171
559
200
630
228
735
258
859
293
111
397
142
483
171
534
183
628
216
690
241
793
275
915
310
119
358
132
436
159
498
171
571
201
642
224
738
255
852
288
127
394
149
454
159
505
178
600
209
679
238
786
269
901
305
135
415
149
475
167
552
196
621
224
724
252
847
286
112
391
138
474
167
525
178
618
210
676
235
778
267
898
303
120
352
129
429
155
489
166
562
196
631
218
726
248
838
282
128
388
145
448
155
498
174
591
204
669
232
774
263
888
298
136
411
146
468
163
544
191
612
218
718
247
835
280
113
384
134
466
163
516
173
607
205
666
228
765
261
883
294
121
346
125
421
152
481
162
553
191
621
213
714
243
823
274
129
382
142
441
152
490
170
582
199
658
228
762
257
874
291
137
405
143
462
160
537
188
603
213
705
242
823
274
114
378
131
459
158
507
170
597
200
654
223
751
254
867
286
122
342
122
415
148
474
158
544
187
610
208
702
237
810
267
130
378
138
435
148
483
166
573
195
649
222
751
251
861
285
138
399
139
454
156
529
183
595
209
694
236
811
268
115
372
128
451
154
498
165
588
194
642
217
739
247
852
279
123
336
119
409
144
466
154
537
182
601
203
691
231
798
261
131
372
135
429
145
475
162
564
190
640
217
739
246
847
278
139
393
136
448
152
522
179
586
205
685
231
799
263
116
366
124
444
151
490
161
577
190
631
211
726
241
838
272
124
331
116
403
141
459
151
528
177
591
198
681
226
784
255
132
366
133
421
141
468
158
556
186
630
212
729
240
835
272
140
388
133
442
150
514
175
579
200
675
227
789
257
117
360
121
436
147
481
156
568
185
621
206
714
235
823
266
125
327
114
396
137
451
147
520
173
582
193
669
220
772
249
133
361
130
415
138
462
155
547
182
621
208
718
234
822
266
141
382
131
436
147
507
171
571
196
666
222
777
251
118
354
118
429
143
474
152
559
180
610
201
702
228
810
259
126
321
111
390
134
444
143
511
170
573
189
658
215
760
243
134
355
127
409
135
454
152
540
178
612
203
708
230
810
260
142
378
128
429
143
501
169
564
191
657
217
766
247
119
348
115
423
139
465
149
550
175
600
196
690
223
796
252
127
316
109
385
131
438
140
504
165
564
184
648
210
748
237
135
351
124
403
133
448
148
531
174
604
198
697
225
798
254
143
372
125
423
140
493
165
556
188
648
212
756
241
120
342
113
415
135
457
145
541
171
589
190
679
217
783
246
128
312
106
379
128
430
136
496
161
555
180
639
205
736
232
136
346
121
399
130
441
145
523
171
595
194
688
219
787
248
144
367
123
418
137
487
161
549
184
639
209
745
236
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the shortest clear span shown in the Load Table by (the shortest clear span
shown in the Load Table + 0.67 feet)2 and divide by (the actual
clear span + 0.67 feet)2. The live load shall not exceed the safe
uniform load.
* The safe factored uniform load for the clear spans shown in the
Safe Load Column is equal to (Safe Load) / (Clear span + 0.67).
(The added 0.67 feet (8 inches) is required to obtain the proper
length on which the Load Tables were developed).
In no case shall the safe factored uniform load, for clear spans
less than the minimum clear span shown in the Safe Load
Column, exceed the uniform load calculated for the minimum
clear span listed in the Safe Load Column.
68
The RED figures in this load table are the nominal LIVE loads
per linear foot of joist which will produce an approximate
deflection of 1/360 of the span. LIVE loads which will produce
a deflection of 1/240 of the span may be obtained by multiplying the RED figures by 1.5. In no case shall the TOTAL load
capacity of the joists be exceeded.
ASD
STANDARD LOAD TABLE LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Approx. Wt Depth SAFELOAD*
Joist
in Lbs.
Designation in Lbs. Per in
Linear Ft inches Between
61-88
(Joists only)
89
52DLH10
25
52
298
26700
171
52DLH11
26
52
29300
327
187
52DLH12
29
52
365
32700
204
52DLH13
34
52
39700
443
247
52DLH14
39
52
45400
507
276
52DLH15
42
52
569
51000
311
52DLH16
45
52
614
55000
346
52DLH17
52
52
63300
706
395
66-96
97
56DLH11
26
56
288
28100
169
56DLH12
30
56
32300
331
184
56DLH13
34
56
39100
401
223
56DLH14
39
56
44200
453
249
56DLH15
42
56
518
50500
281
56DLH16
46
56
559
54500
313
56DLH17
51
56
62800
643
356
91
285
159
313
174
349
191
424
231
486
258
545
291
588
324
676
369
99
277
158
318
173
386
209
435
234
498
264
537
294
618
335
92
279
154
306
169
342
185
414
224
476
249
533
282
575
314
661
357
100
272
153
312
168
379
204
427
228
488
256
526
285
605
325
93
273
150
299
164
334
179
406
216
466
242
522
272
563
304
647
346
101
267
149
306
163
372
197
419
221
478
248
516
277
594
316
69
94
267
145
293
158
327
173
397
209
457
234
511
264
551
294
634
335
102
262
145
300
158
365
191
411
214
469
242
506
269
582
306
95
261
140
287
153
320
168
389
203
447
227
500
256
540
285
620
324
103
257
140
295
153
358
186
403
209
460
234
496
262
571
298
96
256
136
281
149
314
163
381
197
438
220
490
247
528
276
608
315
104
253
136
289
150
351
181
396
202
451
228
487
254
560
289
97
251
132
275
144
307
158
373
191
430
213
480
240
518
267
595
304
105
248
133
284
145
344
175
388
196
443
221
478
247
549
281
98
246
128
270
140
301
153
366
185
421
207
470
233
507
260
583
296
106
244
129
278
141
338
171
381
190
434
215
469
240
539
273
99
241
124
264
135
295
149
358
180
413
201
461
226
497
252
572
286
107
239
125
273
137
331
166
375
186
426
209
460
233
529
266
100
236
120
259
132
289
144
351
174
405
194
451
219
487
245
560
279
108
235
122
268
133
325
161
368
181
419
204
452
227
520
258
101
231
116
254
128
284
140
344
170
397
189
443
213
478
237
549
270
109
231
118
263
130
319
157
361
175
411
198
444
221
510
251
102
227
114
249
124
278
135
338
164
390
184
434
207
468
230
539
263
110
227
115
259
126
314
152
355
171
403
192
436
214
501
245
103
223
110
244
120
273
132
331
159
382
178
426
201
459
224
528
255
111
223
113
254
123
308
149
349
167
396
188
428
209
492
238
104
218
107
240
117
268
128
325
155
375
173
418
195
451
217
518
247
112
219
110
249
119
303
145
343
162
389
182
420
204
483
231
ASD
STANDARD LOAD TABLE LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Approx. Wt Depth
Joist
in
Designation in Lbs. Per
Linear Ft inches
(Joists only)
60DLH12
29
60
SAFE LOAD*
in Lbs.
Between
70-99 100-104
31100
31100
60DLH13
35
60
37800
37800
60DLH14
40
60
42000
42000
60DLH15
43
60
49300
49300
60DLH16
46
60
54200
54200
60DLH17
52
60
62300
62300
60DLH18
59
60
71900
71900
64DLH12
31
64
75-99 100-112
30000
30000
64DLH13
34
64
36400
36400
64DLH14
40
64
41700
41700
64DLH15
43
64
47800
47800
64DLH16
46
64
53800
53800
64DLH17
52
64
62000
62000
64DLH18
59
64
71600
71600
68DLH13
37
68
80-99 100-120
35000
35000
68DLH14
40
68
40300
40300
68DLH15
44
68
45200
45200
68DLH16
49
68
53600
53600
68DLH17
55
68
60400
60400
68DLH18
61
68
69900
69900
68DLH19
67
68
80500
80500
72DLH14
41
72
84-99 100-128
39200
39200
72DLH15
44
72
44900
44900
72DLH16
50
72
51900
51900
72DLH17
56
72
58400
58400
72DLH18
59
72
68400
68400
72DLH19
70
72
80200
80200
106
289
163
351
197
391
210
458
248
504
277
579
315
668
357
114
259
150
315
181
360
193
414
228
466
254
536
290
619
328
122
284
168
327
179
365
201
433
236
489
268
566
304
651
344
130
298
167
342
187
395
219
445
250
520
283
609
321
107
284
158
345
191
383
205
450
242
494
269
569
306
656
346
115
255
146
310
176
354
189
407
223
458
248
527
283
608
320
123
279
164
322
175
360
196
427
230
481
262
557
297
641
336
131
294
163
336
183
390
214
438
245
512
276
600
313
108
279
154
339
187
376
199
442
235
485
262
558
298
644
337
116
251
142
305
171
349
184
400
217
450
242
518
275
598
311
124
275
159
317
171
354
191
420
225
474
256
549
289
631
328
132
290
159
331
178
384
209
432
239
505
270
591
306
109
274
150
333
181
370
193
434
228
476
255
548
290
632
327
117
247
138
300
168
343
179
394
211
443
235
509
268
587
304
125
271
155
312
167
348
187
413
219
467
249
540
283
621
320
133
285
155
326
174
378
205
426
233
497
265
582
300
110
270
146
327
176
363
189
427
223
468
247
538
283
621
319
118
243
135
295
163
337
174
387
206
435
229
501
262
578
296
126
267
152
308
163
343
182
407
214
460
244
532
276
611
313
134
281
152
322
171
373
200
420
228
490
258
573
293
111
265
142
322
171
356
183
419
216
460
241
529
275
610
310
119
239
132
291
159
332
171
381
201
428
224
492
255
568
288
127
263
149
303
159
337
178
400
209
453
238
524
269
601
305
135
277
149
317
167
368
196
414
224
483
252
565
286
112
261
138
316
167
350
178
412
210
451
235
519
267
599
303
120
235
129
286
155
326
166
375
196
421
218
484
248
559
282
128
259
145
299
155
332
174
394
204
446
232
516
263
592
298
136
274
146
312
163
363
191
408
218
479
247
557
280
113
256
134
311
163
344
173
405
205
444
228
510
261
589
294
121
231
125
281
152
321
162
369
191
414
213
476
243
549
274
129
255
142
294
152
327
170
388
199
439
228
508
257
583
291
137
270
143
308
160
358
188
402
213
470
242
549
274
114
252
131
306
158
338
170
398
200
436
223
501
254
578
286
122
228
122
277
148
316
158
363
187
407
208
468
237
540
267
130
252
138
290
148
322
166
382
195
433
222
501
251
574
285
138
266
139
303
156
353
183
397
209
463
236
541
268
115
248
128
301
154
332
165
392
194
428
217
493
247
568
279
123
224
119
273
144
311
154
358
182
401
203
461
231
532
261
131
248
135
286
145
317
162
376
190
427
217
493
246
565
278
139
262
136
299
152
348
179
391
205
457
231
533
263
116
244
124
296
151
327
161
385
190
421
211
484
241
559
272
124
221
116
269
141
306
151
352
177
394
198
454
226
523
255
132
244
133
281
141
312
158
371
186
420
212
486
240
557
272
140
259
133
295
150
343
175
386
200
450
227
526
257
117
240
121
291
147
321
156
379
185
414
206
476
235
549
266
125
218
114
264
137
301
147
347
173
388
193
446
220
515
249
133
241
130
277
138
308
155
365
182
414
208
479
234
548
266
141
255
131
291
147
338
171
381
196
444
222
518
251
118
236
118
286
143
316
152
373
180
407
201
468
228
540
259
126
214
111
260
134
296
143
341
170
382
189
439
215
507
243
134
237
127
273
135
303
152
360
178
408
203
472
230
540
260
142
252
128
286
143
334
169
376
191
438
217
511
247
119
232
115
282
139
310
149
367
175
400
196
460
223
531
252
127
211
109
257
131
292
140
336
165
376
184
432
210
499
237
135
234
124
269
133
299
148
354
174
403
198
465
225
532
254
143
248
125
282
140
329
165
371
188
432
212
504
241
120
228
113
277
135
305
145
361
171
393
190
453
217
522
246
128
208
106
253
128
287
136
331
161
370
180
426
205
491
232
136
231
121
266
130
294
145
349
171
397
194
459
219
525
248
144
245
123
279
137
325
161
366
184
426
209
497
236
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the shortest clear span shown in the Load Table by (the shortest clear span
shown in the Load Table + 0.67 feet)2 and divide by (the actual
clear span + 0.67 feet)2. The live load shall not exceed the safe
uniform load.
* The safe uniform load for the clear spans shown in the Safe Load
Column is equal to (Safe Load) / (Clear Span + 0.67). (The added
0.67 feet (8 inches) is required to obtain the proper length on
which the Load Tables were developed).
In no case shall the safe uniform load, for clear spans less than
the minimum clear span shown in the Safe Load Column, exceed
the uniform load calculated for the minimum clear span listed in
the Safe Load Column.
70
Where the joist span is in the RED SHADED area of the load
table, the row of bridging nearest the mid span shall be diagonal bridging with bolted connections at chords and intersection.
Hoisting cables shall not be released until this row of bolted
diagonal bridging is completely installed.
Where the joist span is in the BLUE SHADED area of the load
table, all rows of bridging shall be diagonal bridging with bolted connections at chords and intersection. Hoisting cables
shall not be released until the two rows of bridging nearest the
third points are completely installed.
The RED figures in this load table are the unfactored, nominal
LIVE loads (kiloNewtons per meter) of joist which will produce
an approximate deflection of 1/360 of the span. LIVE loads
which produce a deflection of 1/240 of the span may be
obtained by multiplying the RED figures by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
LRFD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
18LH02
18LH03
18LH04
18LH05
18LH06
18LH07
18LH08
18LH09
20LH02
20LH03
20LH04
20LH05
20LH06
20LH07
20LH08
20LH09
20LH10
Approx
Approx
Depth SAFELOAD*
Mass
Mass
in
in kN
(kN/m)
(kg/m)
(mm)
Between
(Joists only) (Joists only)
6401-7315 7620
10.24
0.15
15
457
80.0
4.56
11.40
0.16
16
457
88.7
5.07
13.22
0.18
18
457
103.4
5.88
14.97
0.22
22
457
116.7
6.62
17.70
0.22
22
457
138.1
7.67
18.38
0.25
25
457
143.4
8.07
19.17
0.28
28
457
149.4
8.42
20.48
0.31
31
457
160.1
8.98
6706-7315 7620
9.67
0.15
15
508
75.3
4.46
10.26
0.16
16
508
80.0
4.91
12.56
0.18
18
508
98.0
6.24
13.48
0.20
21
508
105.4
6.69
17.99
0.22
22
508
140.7
8.84
19.22
0.25
25
508
150.1
9.44
19.87
0.28
28
508
154.7
9.76
21.67
0.31
31
508
169.4
10.63
23.37
0.34
34
508
182.8
11.47
8230
9.15
3.77
10.22
4.21
11.71
4.80
13.44
5.51
15.23
6.11
17.07
6.94
17.77
7.23
19.00
7.69
8230
9.43
4.34
10.02
4.62
12.21
5.63
13.17
6.07
16.70
7.60
17.81
8.11
18.43
8.39
20.09
9.13
21.69
9.82
8534
8.55
3.41
9.58
3.82
10.94
4.31
12.71
5.03
14.18
5.50
15.89
6.24
17.16
6.74
18.34
7.16
8534
8.97
3.99
9.89
4.40
11.55
5.13
13.02
5.76
15.82
6.96
17.20
7.55
17.79
7.82
19.39
8.47
20.92
9.13
71
8839
8.03
3.09
8.95
3.44
10.26
3.88
11.88
4.53
13.24
4.96
14.84
5.63
16.59
6.23
17.73
6.68
8839
8.49
3.64
9.50
4.08
10.85
4.67
12.49
5.34
14.86
6.23
16.63
7.06
17.18
7.29
18.73
7.90
20.22
8.53
9144
7.55
2.81
8.36
3.10
9.63
3.53
11.12
4.11
12.39
4.48
13.90
5.09
15.69
5.64
17.14
6.10
9144
7.99
3.32
9.06
3.76
10.22
4.24
11.90
4.91
13.90
5.63
15.56
6.39
16.63
6.82
18.12
7.39
19.57
7.95
9449
7.09
2.55
7.85
2.83
9.04
3.19
10.42
3.73
11.62
4.08
13.02
4.62
14.88
5.12
16.61
5.54
9449
7.53
3.03
8.64
3.47
9.63
3.86
11.23
4.49
13.04
5.12
14.60
5.80
15.80
6.24
17.55
6.93
18.93
7.44
9754
6.69
2.33
7.37
2.58
8.49
2.91
9.80
3.40
10.92
3.70
12.23
4.20
14.03
4.67
15.60
5.04
9754
7.11
2.77
8.14
3.18
9.10
3.54
10.59
4.10
12.25
4.67
13.72
5.28
15.03
5.76
17.03
6.37
18.36
6.99
LRFD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
24LH03
Approx
Approx
Depth
Mass
Mass
in
(kN/m)
(kg/m)
(mm)
(Joists only) (Joists only)
0.16
16
610
24LH04
0.18
18
610
24LH05
0.19
19
610
24LH06
0.23
24
610
24LH07
0.25
25
610
24LH08
0.26
27
610
24LH09
0.31
31
610
24LH10
0.34
34
610
24LH11
0.36
37
610
28LH05
0.19
19
711
28LH06
0.23
24
711
28LH07
0.25
25
711
28LH08
0.26
27
711
28LH09
0.31
31
711
28LH10
0.34
34
711
28LH11
0.36
37
711
28LH12
0.39
40
711
28LH13
0.44
45
711
32LH06
0.20
21
813
32LH07
0.23
24
813
32LH08
0.25
25
813
32LH09
0.31
31
813
32LH10
0.31
31
813
32LH11
0.35
36
813
32LH12
0.39
40
813
32LH13
0.44
45
813
32LH14
0.48
49
813
32LH15
0.51
52
813
36LH07
0.23
24
914
36LH08
0.26
27
914
36LH09
0.31
31
914
36LH10
0.31
31
914
36LH11
0.34
34
914
36LH12
0.36
37
914
36LH13
0.44
45
914
36LH14
0.53
54
914
36LH15
0.53
54
914
SAFELOAD*
in kN
Between
8534-9754
76.7
10058 10363 10668 10973 11278 11582 11887 12192 12497 12802 13106 13411 13716 14021 14326 14630
7.48 7.42 7.35 7.07 6.72 6.41 6.10 5.84 5.58 5.34 5.12 4.90 4.70 4.53 4.35 4.18
3.42 3.29 3.18 2.97 2.74 2.55 2.36 2.21 2.05 1.92 1.80 1.69 1.59 1.48 1.40 1.31
9.17 8.71 8.29 7.88 7.50 7.15 6.82 6.52 6.23 5.97 5.73 5.49 5.27 5.05 4.85 4.68
94.4
4.20 3.86 3.59 3.31 3.06 2.84 2.65 2.46 2.30 2.15 2.01 1.89 1.78 1.66 1.56 1.47
9.82 9.76 9.63 9.17 8.73 8.31 7.94 7.59 7.24 6.93 6.65 6.37 6.12 5.88 5.64 5.42
100.7
4.49 4.33 4.15 3.85 3.56 3.29 3.06 2.86 2.65 2.49 2.33 2.18 2.05 1.92 1.80 1.70
13.22 12.67 12.14 11.60 11.03 10.50 10.00 9.56 9.12 8.73 8.34 7.96 7.61 7.31 7.00 6.72
135.4
5.99 5.57 5.19 4.83 4.46 4.14 3.83 3.57 3.32 3.07 2.87 2.68 2.51 2.34 2.21 2.07
14.55 13.96 13.41 12.87 12.36 11.84 11.29 10.74 10.24 9.76 9.32 8.90 8.51 8.16 7.81 7.50
148.7
6.59 6.14 5.73 5.35 5.00 4.67 4.33 4.02 3.75 3.48 3.25 3.03 2.84 2.65 2.49 2.34
15.47 14.82 14.20 13.61 13.06 12.52 11.93 11.38 10.87 10.39 9.96 9.52 9.12 8.75 8.40 8.07
158.8
7.00 6.52 6.07 5.66 5.28 4.93 4.58 4.26 3.96 3.70 3.47 3.23 3.03 2.86 2.68 2.52
18.21 17.68 17.18 16.72 16.00 15.23 14.51 13.83 13.17 12.56 11.99 11.47 10.96 10.50 10.06 9.65
186.8
8.20 7.73 7.31 6.71 6.18 5.73 5.29 4.91 4.56 4.26 3.96 3.70 3.47 3.25 3.05 2.86
19.30 18.73 18.21 17.70 17.24 16.81 16.13 15.36 14.62 13.94 13.30 12.74 12.17 11.66 11.18 10.72
197.5
8.69 8.15 7.70 7.29 6.91 6.40 5.92 5.51 5.12 4.75 4.43 4.15 3.88 3.63 3.41 3.21
20.29 19.70 19.15 18.62 18.14 17.66 17.22 16.81 16.06 15.34 14.68 14.05 13.48 12.91 12.41 11.90
208.1
9.10 8.58 8.09 7.66 7.26 6.88 6.55 6.10 5.66 5.26 4.91 4.59 4.29 4.02 3.77 3.54
10058-12192
12497 12802 13106 13411 13716 14021 14326 14630 14935 15240 15545 15850 16154 16459 16764 17069
7.37 7.07 6.78 6.50 6.26 6.01 5.80 5.58 5.36 5.18 4.99 4.81 4.66 4.50 4.35 4.22
93.4
3.19 2.99 2.80 2.62 2.46 2.32 2.18 2.07 1.94 1.83 1.73 1.64 1.56 1.48 1.41 1.34
9.80 9.39 9.01 8.64 8.29 7.96 7.66 7.37 7.09 6.85 6.58 6.37 6.15 5.93 5.73 5.53
124.1
4.21 3.94 3.69 3.47 3.25 3.05 2.87 2.71 2.55 2.42 2.27 2.15 2.04 1.94 1.83 1.75
11.05 10.59 10.15 9.74 9.34 8.97 8.62 8.29 7.99 7.70 7.42 7.15 6.91 6.67 6.45 6.23
140.1
4.75 4.45 4.15 3.89 3.66 3.44 3.23 3.05 2.87 2.71 2.56 2.42 2.30 2.18 2.07 1.97
11.82 11.31 10.85 10.39 9.98 9.58 9.19 8.82 8.47 8.12 7.81 7.53 7.24 6.98 6.74 6.50
150.1
5.07 4.74 4.45 4.15 3.91 3.67 3.44 3.23 3.05 2.86 2.69 2.55 2.40 2.27 2.15 2.04
14.60 13.98 13.39 12.82 12.32 11.82 11.36 10.92 10.52 10.13 9.76 9.41 9.08 8.77 8.47 8.18
184.8
6.24 5.83 5.47 5.12 4.80 4.50 4.24 3.99 3.76 3.54 3.32 3.15 2.97 2.81 2.67 2.52
15.95 15.41 14.86 14.25 13.68 13.13 12.60 12.12 11.66 11.23 10.83 10.44 10.06 9.71 9.39 9.08
202.1
6.80 6.40 6.04 5.66 5.31 4.99 4.69 4.42 4.15 3.92 3.72 3.51 3.32 3.13 2.97 2.81
17.07 16.68 16.11 15.56 14.92 14.33 13.76 13.24 12.74 12.28 11.82 11.40 10.98 10.61 10.24 9.91
216.8
7.26 6.93 6.53 6.17 5.79 5.44 5.12 4.83 4.55 4.29 4.05 3.83 3.63 3.44 3.25 3.09
18.76 18.32 17.90 17.51 17.11 16.76 16.13 15.52 14.92 14.36 13.83 13.33 12.84 12.39 11.95 11.53
238.2
7.95 7.58 7.23 6.94 6.62 6.34 5.95 5.58 5.26 4.96 4.68 4.42 4.15 3.94 3.73 3.54
19.59 19.13 18.69 18.27 17.86 17.49 17.11 16.76 16.44 15.80 15.19 14.62 14.07 13.57 13.09 12.63
248.2
8.30 7.92 7.55 7.22 6.88 6.59 6.31 6.05 5.77 5.44 5.13 4.84 4.58 4.33 4.10 3.88
11582-14021 14326-14630 14935 15240 15545 15850 16154 16459 16764 17069 17374 17678 17983 18288 18593 18898 19202 19507
7.39 7.13 6.89 6.65 6.43 6.21 6.01 5.82 5.62 5.45 5.29 5.12 4.96 4.81 4.68 4.55
112.0
112.0
3.07 2.90 2.75 2.61 2.46 2.34 2.23 2.11 2.01 1.91 1.82 1.73 1.66 1.57 1.51 1.44
8.29 8.01 7.72 7.46 7.20 6.96 6.74 6.52 6.30 6.10 5.93 5.73 5.56 5.40 5.25 5.10
123.4
123.4
3.42 3.25 3.07 2.91 2.75 2.61 2.48 2.36 2.24 2.13 2.04 1.94 1.85 1.76 1.69 1.61
8.99 8.69 8.38 8.07 7.81 7.55 7.28 7.04 6.82 6.61 6.41 6.21 6.01 5.84 5.66 5.51
158.1
158.1
3.72 3.53 3.34 3.15 2.99 2.83 2.68 2.55 2.43 2.32 2.20 2.10 1.99 1.91 1.82 1.75
174.1
174.1 11.29 10.90 10.50 10.13 9.78 9.45 9.15 8.84 8.55 8.29 8.03 7.79 7.55 7.33 7.11 6.89
4.65 4.40 4.15 3.94 3.73 3.54 3.35 3.19 3.03 2.88 2.75 2.62 2.51 2.39 2.29 2.17
190.1
190.1 12.49 12.03 11.62 11.20 10.83 10.46 10.11 9.74 9.41 9.10 8.80 8.51 8.23 7.96 7.72 7.48
5.13 4.84 4.59 4.33 4.11 3.89 3.70 3.50 3.32 3.16 3.00 2.86 2.71 2.59 2.46 2.36
227.5
227.5 13.68 13.17 12.69 12.25 11.84 11.42 11.05 10.68 10.35 10.02 9.69 9.39 9.10 8.82 8.53 8.27
5.61 5.29 5.00 4.74 4.49 4.26 4.04 3.83 3.66 3.48 3.31 3.15 3.00 2.86 2.72 2.61
267.5
267.5 16.06 15.58 15.06 14.53 14.03 13.55 13.09 12.65 12.23 11.84 11.47 11.12 10.77 10.44 10.13 9.82
6.56 6.24 5.92 5.60 5.31 5.03 4.77 4.53 4.30 4.10 3.89 3.72 3.54 3.38 3.22 3.07
294.9
294.9 17.88 17.53 17.18 16.87 16.24 15.65 15.10 14.57 14.07 13.59 13.13 12.71 12.30 11.90 11.53 11.18
7.29 7.00 6.72 6.47 6.12 5.79 5.48 5.16 4.90 4.65 4.43 4.20 4.01 3.82 3.63 3.47
310.9
310.9 18.45 18.08 17.73 17.40 17.07 16.76 16.15 15.60 15.06 14.55 14.07 13.61 13.17 12.76 12.34 11.97
7.51 7.22 6.94 6.68 6.42 6.08 5.76 5.45 5.18 4.91 4.68 4.43 4.23 4.02 3.85 3.66
288.2
288.2 19.04 18.67 18.32 17.97 17.62 17.31 16.98 16.70 16.41 15.87 15.34 14.84 14.36 13.90 13.48 13.06
7.76 7.45 7.18 6.90 6.62 6.39 6.15 5.93 5.73 5.45 5.18 4.93 4.69 4.46 4.26 4.07
12802-14021 14326-17069 17374 17678 17983 18288 18593 18898 19202 19507 19812 20117 20422 20726 21031 21336 21641 21946
6.39 6.19 5.99 5.82 5.98 5.82 5.66 5.49 5.33 5.19 5.05 4.91 4.80 4.66 4.54 4.43
112.0
112.0
2.58 2.45 2.33 2.23 2.13 2.04 1.95 1.86 1.78 1.70 1.63 1.56 1.50 1.44 1.38 1.32
7.02 6.80 6.61 6.41 6.21 6.04 5.86 5.69 5.53 5.38 5.23 5.10 4.96 4.83 4.70 4.57
123.4
123.4
2.83 2.69 2.56 2.45 2.33 2.23 2.13 2.04 1.95 1.86 1.79 1.72 1.64 1.59 1.51 1.45
8.99 8.71 8.44 8.18 7.94 7.70 7.48 7.28 7.07 6.87 6.69 6.50 6.32 6.17 6.01 5.84
158.1
158.1
3.60 3.42 3.26 3.12 2.97 2.84 2.71 2.61 2.49 2.37 2.29 2.18 2.10 2.01 1.94 1.85
9.93 9.63 9.32 9.04 8.77 8.51 8.27 8.03 7.81 7.59 7.39 7.18 7.00 6.80 6.63 6.45
174.1
174.1
3.98 3.79 3.61 3.44 3.28 3.13 3.00 2.87 2.74 2.62 2.52 2.40 2.32 2.21 2.13 2.04
10.83
10.50 10.17 9.87 9.58 9.30 9.01 8.77 8.51 8.27 8.05 7.83 7.61 7.42 7.22 7.04
190.1
190.1
4.33 4.13 3.92 3.75 3.59 3.41 3.26 3.12 2.99 2.86 2.74 2.62 2.52 2.42 2.32 2.23
227.5
227.5 12.98 12.58 12.19 11.82 11.44 11.12 10.79 10.46 10.15 9.85 9.56 9.28 9.01 8.75 8.51 8.27
5.16 4.93 4.69 4.48 4.26 4.07 3.89 3.72 3.54 3.38 3.23 3.10 2.97 2.84 2.72 2.61
267.5
267.5 15.25 14.77 14.31 13.87 13.46 13.04 12.67 12.30 11.95 11.62 11.29 10.98 10.68 10.39 10.13 9.87
6.05 5.76 5.48 5.23 4.99 4.77 4.55 4.34 4.15 3.98 3.82 3.66 3.50 3.37 3.23 3.10
294.9
294.9 16.81 16.52 15.95 15.45 14.95 14.46 14.03 13.59 13.17 12.78 12.41 12.06 11.71 11.38 11.05 10.77
6.65 6.33 6.01 5.72 5.44 5.19 4.94 4.71 4.50 4.30 4.13 3.94 3.77 3.60 3.45 3.32
310.9
310.9 17.70 17.40 17.09 16.83 16.28 15.78 15.27 14.82 14.36 13.94 13.52 13.13 12.76 12.41 12.06 11.73
7.00 6.77 6.53 6.33 6.02 5.74 5.47 5.22 4.99 4.77 4.55 4.36 4.17 3.99 3.83 3.67
72
LRFD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
40LH08
40LH09
40LH10
40LH11
40LH12
40LH13
40LH14
40LH15
40LH16
44LH09
44LH10
44LH11
44LH12
44LH13
44LH14
44LH15
44LH16
44LH17
48LH10
48LH11
48LH12
48LH13
48LH14
48LH15
48LH16
48LH17
SAFELOAD*
Approx
Approx Depth
in kN
Mass
Mass
in
Between
(kN/m)
(kg/m)
(mm)
(Joists only) (Joists only)
14326-17983 18288-19507 19812 20117 20422 20726 21031
0.23
24
1016
110.7
110.7
5.56 5.40 5.27 5.12 4.99
2.18 2.10 2.01 1.92 1.85
0.31
31
1016
145.4
145.4
7.26 7.07 6.89 6.69 6.52
2.86 2.74 2.62 2.52 2.42
0.31
31
1016
160.1
160.1
8.03 7.81 7.59 7.39 7.20
3.15 3.02 2.88 2.77 2.67
0.32
33
1016
174.8
174.8
8.73 8.49 8.27 8.05 7.83
3.41 3.26 3.13 3.02 2.88
0.36
37
1016
212.8
212.8 10.63 10.33 10.04 9.78 9.52
4.15 3.98 3.80 3.66 3.51
0.44
45
1016
250.8
250.8 12.54 12.19 11.86 11.55 11.25
4.87 4.67 4.48 4.30 4.13
0.51
52
1016
286.9
286.9 14.36 13.96 13.57 13.20 12.84
5.58 5.35 5.12 4.90 4.71
0.53
54
1016
320.9
320.9 16.06 15.58 15.12 14.68 14.27
6.23 5.95 5.69 5.44 5.21
0.61
63
1016
353.6
353.6 17.68 17.42 17.16 16.89 16.65
6.84 6.64 6.43 6.24 6.07
15850-17983 18288-21946 22250 22555 22860 23165 23470
0.28
28
1118
133.4
133.4
5.95 5.80 5.66 5.53 5.40
2.30 2.21 2.13 2.05 1.98
0.31
31
1118
147.4
147.4
6.56 6.41 6.26 6.10 5.95
2.53 2.45 2.36 2.26 2.18
0.32
33
1118
159.4
159.4
7.11 6.93 6.78 6.61 6.45
2.74 2.64 2.55 2.45 2.36
8.80 8.60 8.38 8.18 7.99
0.36
37
1118
197.5
197.5
3.38 3.26 3.13 3.02 2.91
0.44
45
1118
234.1
234.1 10.44 10.20 9.93 9.71 9.47
4.01 3.86 3.70 3.59 3.44
0.45
46
1118
269.5
269.5 12.01 11.68 11.38 11.07 10.79
4.59 4.40 4.24 4.07 3.91
0.53
54
1118
313.5
313.5 13.98 13.63 13.30 12.98 12.67
5.34 5.13 4.94 4.75 4.58
0.61
63
1118
361.6
361.6 16.13 15.73 15.34 14.97 14.62
6.14 5.91 5.69 5.47 5.28
0.69
70
1118
388.3
388.3 17.29 17.07 16.83 16.61 16.41
6.56 6.39 6.21 6.05 5.91
17069-17983 18288-24384 24689 24994 25298 25603 25908
0.31
31
1219
133.4
133.4
5.38 5.27 5.16 5.05 4.94
2.05 1.98 1.92 1.85 1.79
0.32
33
1219
144.7
144.7
5.82 5.69 5.58 5.45 5.34
2.21 2.14 2.07 1.99 1.94
0.36
37
1219
182.8
182.8
7.35 7.20 7.04 6.89 6.74
2.78 2.69 2.61 2.52 2.43
0.42
43
1219
218.8
218.8
8.80 8.60 8.40 8.23 8.05
3.32 3.22 3.10 3.00 2.90
0.47
48
1219
258.2
258.2 10.39 10.15 9.93 9.71 9.50
3.92 3.79 3.66 3.54 3.41
0.53
54
1219
296.9
296.9 11.93 11.66 11.40 11.16 10.92
4.49 4.34 4.18 4.05 3.92
0.61
63
1219
342.2
342.2 13.76 13.46 13.15 12.87 12.60
5.18 5.00 4.83 4.67 4.52
384.3
0.69
70
1219
384.3 15.45 15.10 14.77 14.44 14.14
5.79 5.58 5.41 5.22 5.04
23165
4.20
1.41
5.47
1.83
6.04
2.02
6.56
2.20
7.96
2.65
9.39
3.12
10.72
3.54
11.77
3.91
13.96
4.61
25603
4.61
1.54
5.10
1.70
5.51
1.85
6.74
2.26
8.07
2.69
9.08
3.02
10.68
3.54
12.43
4.11
13.96
4.61
28042
4.29
1.44
4.64
1.54
5.82
1.94
6.96
2.32
8.20
2.72
9.41
3.12
10.87
3.60
12.21
4.02
23470 23774
4.09 4.00
1.35 1.31
5.34 5.23
1.78 1.72
5.88 5.73
1.95 1.88
6.41 6.26
2.11 2.04
7.77 7.57
2.56 2.46
9.17 8.95
3.02 2.90
10.46 10.20
3.40 3.28
11.47 11.18
3.76 3.61
13.61 13.26
4.43 4.26
25908 26213
4.53 4.42
1.50 1.44
4.99 4.88
1.64 1.60
5.40 5.29
1.79 1.73
6.56 6.41
2.17 2.10
7.90 7.72
2.61 2.52
8.88 8.66
2.91 2.81
10.42 10.20
3.41 3.31
12.14 11.88
3.96 3.83
13.65 13.35
4.45 4.30
28346 28651
4.20 4.11
1.40 1.35
4.55 4.46
1.50 1.45
5.71 5.60
1.88 1.83
6.82 6.69
2.24 2.18
8.03 7.88
2.64 2.56
9.23 9.04
3.03 2.93
10.66 10.44
3.48 3.38
11.97 11.73
3.91 3.79
24079
3.89
1.25
5.10
1.64
5.58
1.80
6.10
1.97
7.39
2.37
8.73
2.80
9.96
3.15
10.90
3.48
12.93
4.11
26518
4.33
1.40
4.77
1.54
5.16
1.67
6.28
2.02
7.57
2.43
8.47
2.72
9.96
3.19
11.62
3.72
13.06
4.15
28956
4.04
1.31
4.37
1.41
5.49
1.78
6.56
2.11
7.72
2.49
8.86
2.84
10.24
3.28
11.49
3.67
24384
3.80
1.21
4.99
1.59
5.45
1.73
5.97
1.89
7.22
2.29
8.53
2.69
9.71
3.05
10.63
3.35
12.60
3.95
26822
4.24
1.35
4.68
1.50
5.07
1.61
6.12
1.95
7.39
2.34
8.29
2.64
9.74
3.07
11.38
3.59
12.78
4.02
29261
3.96
1.26
4.29
1.37
5.38
1.72
6.43
2.05
7.57
2.40
8.69
2.75
10.04
3.18
11.27
3.57
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the
shortest clear span shown in the Load Table by the (the
shortest clear span shown in the Load Table + 203 mm)2 and
divide by (the actual clear span + 203 mm)2. The live load
shall not exceed the safe uniform load.
* The safe factored uniform load for the clear spans shown
in the Safe Load Column is equal to (Safe Load) / (Clear
span + 203). (The added 203 millimeters is required to
obtain the proper length on which the Load Tables were
developed).
In no case shall the safe factored uniform load, for clear
spans less than the minimum clear span shown in the Safe
Load Column, exceed the uniform load calculated for the
minimum clear span listed in the Safe Load Column.
73
The black figures in the following table give the TOTAL safe
uniformly distributed load-carrying capacities, in kiloNewtons
per meter (kN/m) of ASD LH-Series Steel Joists. The weight
(kN/m) of the DEAD loads, including the joists, must in all
cases be deducted to determine the LIVE load-carrying capacities of the joists. The approximate DEAD load of the joist may
be determined from the weights shown in the tables. All loads
shown are for roof construction only.
The RED figures in this load table are the nominal LIVE
loads (kiloNewtons per meter) of joist which will produce an
approximate deflection of 1/360 of the span. LIVE loads
which produce a deflection of 1/240 of the span may be
obtained by multiplying the RED figures by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
When holes are required in top or bottom chords, the carrying capacities must be reduced in proportion to the reduction
of chord areas.
The top chords are considered as being stayed laterally by
floor slab or roof deck.
ASD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
18LH02
18LH03
18LH04
18LH05
18LH06
18LH07
18LH08
18LH09
Approx
Approx Depth SAFELOAD*
in
in kN
Mass
Mass
(kN/m)
(kg/m)
(mm)
Between
(Joists only) (Joists only)
6401-7315 7620
6.82
0.15
15
457
80.0
4.56
7.60
0.16
16
457
88.7
5.07
8.81
0.18
18
457
103.4
5.88
9.98
0.22
22
457
116.7
6.62
11.80
0.22
22
457
138.1
7.67
12.25
0.25
25
457
143.4
8.07
12.78
0.28
28
457
149.4
8.42
13.65
0.31
31
457
160.1
8.98
6706-7315
20LH02
0.15
15
508
75.3
20LH03
0.16
16
508
80.0
20LH04
0.18
18
508
98.0
20LH05
0.20
21
508
105.4
20LH06
0.22
22
508
140.7
20LH07
0.25
25
508
150.1
20LH08
0.28
28
508
154.7
20LH09
0.31
31
508
169.4
20LH10
0.34
34
508
182.8
6.45
4.14
7.19
4.62
8.33
5.35
9.45
6.04
10.93
6.84
11.80
7.48
12.30
7.79
13.14
8.33
6.10
3.77
6.81
4.21
7.80
4.80
8.96
5.51
10.15
6.11
11.38
6.94
11.85
7.23
12.66
7.69
5.70
3.41
6.39
3.82
7.29
4.31
8.47
5.03
9.45
5.50
10.59
6.24
11.44
6.74
12.22
7.16
5.35
3.09
5.96
3.44
6.84
3.88
7.92
4.53
8.82
4.96
9.89
5.63
11.06
6.23
11.82
6.68
5.03
2.81
5.57
3.10
6.42
3.53
7.41
4.11
8.26
4.48
9.26
5.09
10.46
5.64
11.42
6.10
4.72
2.55
5.23
2.83
6.02
3.19
6.94
3.73
7.74
4.08
8.68
4.62
9.92
5.12
11.07
5.54
4.46
2.33
4.91
2.58
5.66
2.91
6.53
3.40
7.28
3.70
8.15
4.20
9.35
4.67
10.40
5.04
4.21
2.14
4.62
2.34
5.32
2.65
6.14
3.09
6.85
3.38
7.67
3.85
8.81
4.26
9.79
4.61
3.98
1.97
4.36
2.15
5.02
2.43
5.79
2.84
6.46
3.09
7.23
3.51
8.33
3.89
9.23
4.21
3.77
1.80
4.13
1.98
4.74
2.23
5.47
2.61
6.10
2.84
6.84
3.23
7.88
3.59
8.72
3.88
3.57
1.66
3.89
1.80
4.49
2.05
5.18
2.39
5.77
2.62
6.47
2.97
7.47
3.29
8.26
3.57
7620 7925 8230 8534 8839 9144 9449 9754 10058 10363 10668 10973 11278 11582 11887 12192
6.45
4.46
6.84
4.91
8.37
6.24
8.98
6.69
11.99
8.84
12.81
9.44
13.25
9.76
14.44
10.63
15.58
11.47
6.37
4.42
6.75
4.85
8.26
5.92
8.88
6.37
11.54
8.18
12.33
8.74
12.74
9.03
13.90
9.85
15.00
10.56
6.28
4.34
6.68
4.62
8.14
5.63
8.78
6.07
11.13
7.60
11.87
8.11
12.28
8.39
13.39
9.13
14.46
9.82
5.98
3.99
6.59
4.40
7.70
5.13
8.68
5.76
10.55
6.96
11.47
7.55
11.86
7.82
12.93
8.47
13.95
9.13
74
5.66
3.64
6.33
4.08
7.23
4.67
8.33
5.34
9.90
6.23
11.09
7.06
11.45
7.29
12.49
7.90
13.48
8.53
5.32
3.32
6.04
3.76
6.81
4.24
7.93
4.91
9.26
5.63
10.37
6.39
11.09
6.82
12.08
7.39
13.04
7.95
5.02
3.03
5.76
3.47
6.42
3.86
7.48
4.49
8.69
5.12
9.73
5.80
10.53
6.24
11.70
6.93
12.62
7.44
4.74
2.77
5.42
3.18
6.07
3.54
7.06
4.10
8.17
4.67
9.15
5.28
10.02
5.76
11.35
6.37
12.24
6.99
4.48
2.53
5.13
2.91
5.73
3.25
6.68
3.76
7.69
4.26
8.61
4.83
9.54
5.32
11.01
5.82
11.87
6.53
4.24
2.33
4.85
2.68
5.42
2.99
6.33
3.47
7.25
3.89
8.11
4.42
9.06
4.90
10.39
5.34
11.54
5.99
4.01
2.14
4.61
2.46
5.15
2.75
5.99
3.19
6.84
3.59
7.67
4.05
8.58
4.50
9.82
4.90
10.91
5.50
3.82
1.98
4.36
2.27
4.88
2.53
5.69
2.94
6.47
3.29
7.25
3.73
8.14
4.15
9.28
4.50
10.31
5.04
3.63
1.83
4.13
2.08
4.64
2.34
5.41
2.72
6.14
3.05
6.87
3.44
7.73
3.82
8.80
4.15
9.77
4.67
3.45
1.70
3.92
1.94
4.42
2.17
5.15
2.52
5.82
2.80
6.52
3.18
7.34
3.53
8.34
3.85
9.28
4.31
3.28
1.57
3.72
1.79
4.21
2.02
4.90
2.34
5.53
2.59
6.20
2.94
6.99
3.28
7.93
3.56
8.81
3.99
3.13
1.47
3.54
1.66
4.01
1.88
4.68
2.18
5.26
2.40
5.89
2.72
6.66
3.05
7.54
3.31
8.39
3.70
ASD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH- SERIES
Based on a 345 MPa MaximumYield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Approx
Approx Depth
Mass
Mass
in
(kN/m)
(kg/m)
(mm)
(Joists only) (Joists only)
24LH03
0.16
16
610
SAFELOAD*
in kN
Between
8534-9754
10058 10363 10668 10973 11278 11582 11887 12192 12497 12802 13106 13411 13716 14021 14326 14630
51.1
24LH04
0.18
18
610
62.7
24LH05
0.19
19
610
67.1
24LH06
0.23
24
610
90.2
24LH07
0.25
25
610
99.1
24LH08
0.26
27
610
105.8
24LH09
0.31
31
610
124.5
24LH10
0.34
34
610
131.6
24LH11
0.36
37
610
138.7
28LH05
0.19
19
711
62.2
28LH06
0.23
24
711
82.7
28LH07
0.25
25
711
93.4
28LH08
0.26
27
711
100.0
28LH09
0.31
31
711
123.2
28LH10
0.34
34
711
134.7
28LH11
0.36
37
711
144.5
28LH12
0.39
40
711
158.8
28LH13
0.44
45
711
4.99
3.42
6.11
4.20
6.55
4.49
8.81
5.99
9.70
6.59
10.31
7.00
12.14
8.20
12.87
8.69
13.52
9.10
10058-12192
165.4
32LH06
0.20
21
813
74.2
74.2
32LH07
0.23
24
813
83.5
83.5
32LH08
0.25
25
813
90.7
90.7
32LH09
0.31
31
813
113.8
113.8
32LH10
0.31
31
813
125.8
125.8
32LH11
0.35
36
813
137.8
137.8
32LH12
0.39
40
813
161.9
161.9
32LH13
0.44
45
813
180.5
180.5
32LH14
0.48
49
813
185.9
185.9
32LH15
0.51
52
813
192.1
192.1
36LH07
0.23
24
914
74.7
74.7
36LH08
0.26
27
914
82.2
82.2
36LH09
0.31
31
914
105.4
105.4
36LH10
0.31
31
914
116.0
116.0
36LH11
0.34
34
914
126.7
126.7
36LH12
0.36
37
914
151.6
151.6
36LH13
0.44
45
914
178.3
178.3
36LH14
0.53
54
914
196.6
196.6
36LH15
0.53
54
914
207.2
207.2
12802-14021 14326-17069
4.90
3.18
5.53
3.59
6.42
4.15
8.09
5.19
8.94
5.73
9.47
6.07
11.45
7.31
12.14
7.70
12.76
8.09
4.71
2.97
5.25
3.31
6.11
3.85
7.73
4.83
8.58
5.35
9.07
5.66
11.14
6.71
11.80
7.29
12.41
7.66
4.48
2.74
5.00
3.06
5.82
3.56
7.35
4.46
8.24
5.00
8.71
5.28
10.66
6.18
11.49
6.91
12.09
7.26
4.27
2.55
4.77
2.84
5.54
3.29
7.00
4.14
7.89
4.67
8.34
4.93
10.15
5.73
11.20
6.40
11.77
6.88
4.07
2.36
4.55
2.65
5.29
3.06
6.66
3.83
7.53
4.33
7.95
4.58
9.67
5.29
10.75
5.92
11.48
6.55
3.89
2.21
4.34
2.46
5.06
2.86
6.37
3.57
7.16
4.02
7.58
4.26
9.22
4.91
10.24
5.51
11.20
6.10
3.72
2.05
4.15
2.30
4.83
2.65
6.08
3.32
6.82
3.75
7.25
3.96
8.78
4.56
9.74
5.12
10.71
5.66
3.56
1.92
3.98
2.15
4.62
2.49
5.82
3.07
6.50
3.48
6.93
3.70
8.37
4.26
9.29
4.75
10.23
5.26
3.41
1.80
3.82
2.01
4.43
2.33
5.56
2.87
6.21
3.25
6.64
3.47
7.99
3.96
8.87
4.43
9.79
4.91
3.26
1.69
3.66
1.89
4.24
2.18
5.31
2.68
5.93
3.03
6.34
3.23
7.64
3.70
8.49
4.15
9.36
4.59
3.13
1.59
3.51
1.78
4.08
2.05
5.07
2.51
5.67
2.84
6.08
3.03
7.31
3.47
8.11
3.88
8.98
4.29
3.02
1.48
3.37
1.66
3.92
1.92
4.87
2.34
5.44
2.65
5.83
2.86
7.00
3.25
7.77
3.63
8.61
4.02
2.90
1.40
3.23
1.56
3.76
1.80
4.67
2.21
5.21
2.49
5.60
2.68
6.71
3.05
7.45
3.41
8.27
3.77
2.78
1.31
3.12
1.47
3.61
1.70
4.48
2.07
5.00
2.34
5.38
2.52
6.43
2.86
7.15
3.21
7.93
3.54
12497 12802 13106 13411 13716 14021 14326 14630 14935 15240 15545 15850 16154 16459 16764 17069
4.91
3.19
6.53
4.21
7.36
4.75
7.88
5.07
9.73
6.24
10.63
6.80
11.38
7.26
12.50
7.95
13.06
8.30
11582-14021 14326-14630
4.94
3.29
5.80
3.86
6.50
4.33
8.44
5.57
9.31
6.14
9.88
6.52
11.79
7.73
12.49
8.15
13.13
8.58
4.71
2.99
6.26
3.94
7.06
4.45
7.54
4.74
9.32
5.83
10.27
6.40
11.12
6.93
12.21
7.58
12.75
7.92
4.52
2.80
6.01
3.69
6.77
4.15
7.23
4.45
8.93
5.47
9.90
6.04
10.74
6.53
11.93
7.23
12.46
7.55
4.33
2.62
5.76
3.47
6.49
3.89
6.93
4.15
8.55
5.12
9.50
5.66
10.37
6.17
11.67
6.94
12.18
7.22
4.17
2.46
5.53
3.25
6.23
3.66
6.65
3.91
8.21
4.80
9.12
5.31
9.95
5.79
11.41
6.62
11.90
6.88
4.01
2.32
5.31
3.05
5.98
3.44
6.39
3.67
7.88
4.50
8.75
4.99
9.55
5.44
11.17
6.34
11.66
6.59
3.86
2.18
5.10
2.87
5.74
3.23
6.12
3.44
7.57
4.24
8.40
4.69
9.17
5.12
10.75
5.95
11.41
6.31
3.72
2.07
4.91
2.71
5.53
3.05
5.88
3.23
7.28
3.99
8.08
4.42
8.82
4.83
10.34
5.58
11.17
6.05
3.57
1.94
4.72
2.55
5.32
2.87
5.64
3.05
7.01
3.76
7.77
4.15
8.49
4.55
9.95
5.26
10.96
5.77
3.45
1.83
4.56
2.42
5.13
2.71
5.41
2.86
6.75
3.54
7.48
3.92
8.18
4.29
9.57
4.96
10.53
5.44
3.32
1.73
4.39
2.27
4.94
2.56
5.21
2.69
6.50
3.32
7.22
3.72
7.88
4.05
9.22
4.68
10.12
5.13
3.21
1.64
4.24
2.15
4.77
2.42
5.02
2.55
6.27
3.15
6.96
3.51
7.60
3.83
8.88
4.42
9.74
4.84
3.10
1.56
4.10
2.04
4.61
2.30
4.83
2.40
6.05
2.97
6.71
3.32
7.32
3.63
8.56
4.15
9.38
4.58
3.00
1.48
3.95
1.94
4.45
2.18
4.65
2.27
5.85
2.81
6.47
3.13
7.07
3.44
8.26
3.94
9.04
4.33
2.90
1.41
3.82
1.83
4.30
2.07
4.49
2.15
5.64
2.67
6.26
2.97
6.82
3.25
7.96
3.73
8.72
4.10
2.81
1.34
3.69
1.75
4.15
1.97
4.33
2.04
5.45
2.52
6.05
2.81
6.61
3.09
7.69
3.54
8.42
3.88
14935 15240 15545 15850 16154 16459 16764 17069 17374 17678 17983 18288 18593 18898 19202 19507
4.93
3.07
5.53
3.42
5.99
3.72
7.53
4.65
8.33
5.13
9.12
5.61
10.71
6.56
11.92
7.29
12.30
7.51
12.69
7.76
4.75
2.90
5.34
3.25
5.79
3.53
7.26
4.40
8.02
4.84
8.78
5.29
10.39
6.24
11.68
7.00
12.05
7.22
12.44
7.45
4.59
2.75
5.15
3.07
5.58
3.34
7.00
4.15
7.74
4.59
8.46
5.00
10.04
5.92
11.45
6.72
11.82
6.94
12.21
7.18
4.43
2.61
4.97
2.91
5.38
3.15
6.75
3.94
7.47
4.33
8.17
4.74
9.69
5.60
11.25
6.47
11.60
6.68
11.98
6.90
4.29
2.46
4.80
2.75
5.21
2.99
6.52
3.73
7.22
4.11
7.89
4.49
9.35
5.31
10.82
6.12
11.38
6.42
11.74
6.62
4.14
2.34
4.64
2.61
5.03
2.83
6.30
3.54
6.97
3.89
7.61
4.26
9.03
5.03
10.43
5.79
11.17
6.08
11.54
6.39
4.01
2.23
4.49
2.48
4.85
2.68
6.10
3.35
6.74
3.70
7.36
4.04
8.72
4.77
10.06
5.48
10.77
5.76
11.32
6.15
3.88
2.11
4.34
2.36
4.69
2.55
5.89
3.19
6.49
3.50
7.12
3.83
8.43
4.53
9.71
5.16
10.40
5.45
11.13
5.93
3.75
2.01
4.20
2.24
4.55
2.43
5.70
3.03
6.27
3.32
6.90
3.66
8.15
4.30
9.38
4.90
10.04
5.18
10.94
5.73
3.63
1.91
4.07
2.13
4.40
2.32
5.53
2.88
6.07
3.16
6.68
3.48
7.89
4.10
9.06
4.65
9.70
4.91
10.58
5.45
3.53
1.82
3.95
2.04
4.27
2.20
5.35
2.75
5.86
3.00
6.46
3.31
7.64
3.89
8.75
4.43
9.38
4.68
10.23
5.18
3.41
1.73
3.82
1.94
4.14
2.10
5.19
2.62
5.67
2.86
6.26
3.15
7.41
3.72
8.47
4.20
9.07
4.43
9.89
4.93
3.31
1.66
3.70
1.85
4.01
1.99
5.03
2.51
5.48
2.71
6.07
3.00
7.18
3.54
8.20
4.01
8.78
4.23
9.57
4.69
3.21
1.57
3.60
1.76
3.89
1.91
4.88
2.39
5.31
2.59
5.88
2.86
6.96
3.38
7.93
3.82
8.50
4.02
9.26
4.46
3.12
1.51
3.50
1.69
3.77
1.82
4.74
2.29
5.15
2.46
5.69
2.72
6.75
3.22
7.69
3.63
8.23
3.85
8.98
4.26
3.03
1.44
5.40
1.61
3.67
1.75
4.59
2.17
4.99
2.36
5.51
2.61
6.55
3.07
7.45
3.47
7.98
3.66
8.71
4.07
17374 17678 17983 18288 18593 18898 19202 19507 19812 20117 20422 20726 21031 21336 21641 21946
4.26
2.58
4.68
2.83
5.99
3.60
6.62
3.98
7.22
4.33
8.65
5.16
10.17
6.05
11.20
6.65
11.80
7.00
4.13
2.45
4.53
2.69
5.80
3.42
6.42
3.79
7.00
4.13
8.39
4.93
9.85
5.76
11.01
6.33
11.60
6.77
3.99
2.33
4.40
2.56
5.63
3.26
6.21
3.61
6.78
3.92
8.12
4.69
9.54
5.48
10.63
6.01
11.39
6.53
3.88
2.23
4.27
2.45
5.45
3.12
6.02
3.44
6.58
3.75
7.88
4.48
9.25
5.23
10.30
5.72
11.22
6.33
75
3.76
2.13
4.14
2.33
5.29
2.97
5.85
3.28
6.39
3.59
7.63
4.26
8.97
4.99
9.96
5.44
10.85
6.02
3.66
2.04
4.02
2.23
5.13
2.84
5.67
3.13
6.20
3.41
7.41
4.07
8.69
4.77
9.64
5.19
10.52
5.74
3.56
1.95
3.91
2.13
4.99
2.71
5.51
3.00
6.01
3.26
7.19
3.89
8.44
4.55
9.35
4.94
10.18
5.47
3.45
1.86
3.79
2.04
4.85
2.61
5.35
2.87
5.85
3.12
6.97
3.72
8.20
4.34
9.06
4.71
9.88
5.22
3.35
1.78
3.69
1.95
4.71
2.49
5.21
2.74
5.67
2.99
6.77
3.54
7.96
4.15
8.78
4.50
9.57
4.99
3.26
1.70
3.59
1.86
4.58
2.37
5.06
2.62
5.51
2.86
6.56
3.38
7.74
3.98
8.52
4.30
9.29
4.77
3.18
1.63
3.48
1.79
4.46
2.29
4.93
2.52
5.37
2.74
6.37
3.23
7.53
3.82
8.27
4.13
9.01
4.55
3.09
1.56
3.40
1.72
4.33
2.18
4.78
2.40
5.22
2.62
6.18
3.10
7.32
3.66
8.04
3.94
8.75
4.36
3.02
1.50
3.31
1.64
4.21
2.10
4.67
2.32
5.07
2.52
6.01
2.97
7.12
3.50
7.80
3.77
8.50
4.17
2.93
1.44
3.22
1.59
4.11
2.01
4.53
2.21
4.94
2.42
5.83
2.84
6.93
3.37
7.58
3.60
8.27
3.99
2.86
1.38
3.13
1.51
4.01
1.94
4.42
2.13
4.81
2.32
5.67
2.72
6.75
3.23
7.36
3.45
8.04
3.83
2.78
1.32
3.05
1.45
3.89
1.85
4.30
2.04
4.69
2.23
5.51
2.61
6.58
3.10
7.18
3.32
7.82
3.67
ASD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LH- SERIES
Based on a 345 MPa Maximum Yield Strength - Loads shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Approx
Approx
Depth
in
Mass
Mass
(kN/m)
(kg/m)
(mm)
(Joists only) (Joists only)
40LH08
0.23
24
1016
SAFELOAD*
in kN
Between
14326-17983 18288-19507
73.8
73.8
40LH09
0.31
31
1016
96.9
96.9
40LH10
0.31
31
1016
106.7
106.7
40LH11
0.32
33
1016
116.5
116.5
40LH12
0.36
37
1016
141.8
141.8
40LH13
0.44
45
1016
167.2
167.2
40LH14
0.51
52
1016
191.2
191.2
40LH15
0.53
54
1016
213.9
213.9
40LH16
0.61
63
1016
235.7
235.7
15850-17983 18288-21946
44LH09
0.28
28
1118
88.9
88.9
44LH10
0.31
31
1118
98.3
98.3
44LH11
0.32
33
1118
106.3
106.3
44LH12
0.36
37
1118
131.6
131.6
44LH13
0.44
45
1118
156.1
156.1
44LH14
0.45
46
1118
179.7
179.7
44LH15
0.53
54
1118
209.0
209.0
44LH16
0.61
63
1118
241.0
241.0
44LH17
0.69
70
1118
258.8
258.8
17068-17983 18288-24384
48LH10
0.31
31
1219
88.9
88.9
48LH11
0.32
33
1219
96.5
96.5
48LH12
0.36
37
1219
121.8
121.8
48LH13
0.42
43
1219
145.9
145.9
48LH14
0.47
48
1219
172.1
172.1
48LH15
0.53
54
1219
197.9
197.9
48LH16
0.61
63
1219
228.1
228.1
48LH17
0.69
70
1219
256.2
256.2
3.70
2.18
4.84
2.86
5.35
3.15
5.82
3.41
7.09
4.15
8.36
4.87
9.57
5.58
10.71
6.23
11.79
6.84
3.60
2.10
4.71
2.74
5.21
3.02
5.66
3.26
6.88
3.98
8.12
4.67
9.31
5.35
10.39
5.95
11.61
6.64
3.51
2.01
4.59
2.62
5.06
2.88
5.51
3.13
6.69
3.80
7.90
4.48
9.04
5.12
10.08
5.69
11.44
6.43
3.41
1.92
4.46
2.52
4.93
2.77
5.37
3.02
6.52
3.66
7.70
4.30
8.80
4.90
9.79
5.44
11.26
6.24
3.32
1.85
4.34
2.42
4.80
2.67
5.22
2.88
6.34
3.51
7.50
4.13
8.56
4.71
9.51
5.21
11.10
6.07
3.23
1.78
4.24
2.33
4.68
2.56
5.09
2.77
6.18
3.37
7.29
3.95
8.33
4.50
9.23
4.99
10.96
5.89
3.16
1.70
4.13
2.23
4.56
2.46
4.96
2.67
6.02
3.23
7.10
3.79
8.11
4.33
8.98
4.78
10.65
5.64
3.07
1.63
4.02
2.14
4.45
2.36
4.84
2.56
5.86
3.10
6.93
3.64
7.90
4.15
8.74
4.59
10.36
5.41
3.00
1.57
3.92
2.05
4.33
2.27
4.71
2.46
5.72
2.99
6.75
3.51
7.70
3.98
8.50
4.40
10.08
5.19
2.93
1.51
3.83
1.98
4.23
2.18
4.59
2.37
5.57
2.87
6.58
3.37
7.51
3.83
8.27
4.23
9.82
4.99
2.86
1.45
3.73
1.91
4.13
2.10
4.49
2.29
5.44
2.75
6.42
3.25
7.32
3.67
8.05
4.07
9.55
4.80
2.80
1.41
3.64
1.83
4.02
2.02
4.37
2.20
5.31
2.65
6.26
3.12
7.15
3.54
7.85
3.91
9.31
4.61
2.72
1.35
3.56
1.78
3.92
1.95
4.27
2.11
5.18
2.56
6.11
3.02
6.97
3.40
7.64
3.76
9.07
4.43
2.67
1.31
3.48
1.72
3.82
1.88
4.17
2.04
5.04
2.46
5.96
2.90
6.80
3.28
7.45
3.61
8.84
4.26
2.59
1.25
3.40
1.64
3.72
1.80
4.07
1.97
4.93
2.37
5.82
2.80
6.64
3.15
7.26
3.48
8.62
4.11
2.53
1.21
3.32
1.59
3.63
1.73
3.98
1.89
4.81
2.29
5.69
2.69
6.47
3.05
7.09
3.35
8.40
3.95
22250 22555 22860 23165 23470 23774 24079 24384 24689 24994 25298 25603 25908 26213 26518 26822
3.96
2.30
4.37
2.53
4.74
2.74
5.86
3.38
6.96
4.01
8.01
4.59
9.32
5.34
10.75
6.14
11.52
6.56
3.86
2.21
4.27
2.45
4.62
2.64
5.73
3.26
6.80
3.86
7.79
4.40
9.09
5.13
10.49
5.91
11.38
6.39
3.77
2.13
4.17
2.36
4.52
2.55
5.58
3.13
6.62
3.70
7.58
4.24
8.87
4.94
10.23
5.69
11.22
6.21
3.69
2.05
4.07
2.26
4.40
2.45
5.45
3.02
6.47
3.59
7.38
4.07
8.65
4.75
9.98
5.47
11.07
6.05
3.60
1.98
3.96
2.18
4.30
2.36
5.32
2.91
6.31
3.44
7.19
3.91
8.44
4.58
9.74
5.28
10.94
5.91
3.53
1.91
3.88
2.10
4.21
2.29
5.19
2.80
6.17
3.32
7.01
3.77
8.24
4.42
9.51
5.07
10.68
5.69
3.44
1.85
3.79
2.02
4.11
2.20
5.06
2.69
6.02
3.21
6.84
3.63
8.04
4.26
9.29
4.90
10.43
5.48
3.37
1.78
3.70
1.95
4.02
2.13
4.94
2.61
5.89
3.09
6.66
3.50
7.83
4.10
9.07
4.72
10.20
5.29
3.29
1.72
3.63
1.89
3.92
2.04
4.83
2.51
5.76
2.99
6.50
3.37
7.64
3.95
8.87
4.56
9.96
5.12
3.22
1.66
3.54
1.82
3.85
1.98
4.71
2.42
5.63
2.88
6.36
3.25
7.47
3.80
8.66
4.40
9.73
4.93
3.15
1.60
3.47
1.76
3.76
1.91
4.59
2.33
5.50
2.78
6.20
3.13
7.29
3.67
8.46
4.24
9.51
4.77
3.07
1.54
3.40
1.70
3.67
1.85
4.49
2.26
5.38
2.69
6.05
3.02
7.12
3.54
8.28
4.11
9.31
4.61
3.02
1.50
3.32
1.64
3.60
1.79
4.37
2.17
5.26
2.61
5.92
2.91
6.94
3.41
8.09
3.96
9.10
4.45
2.94
1.44
3.25
1.60
3.53
1.73
4.27
2.10
5.15
2.52
5.77
2.81
6.80
3.31
7.92
3.83
8.90
4.30
2.88
1.40
3.18
1.54
3.44
1.67
4.18
2.02
5.04
2.43
5.64
2.72
6.64
3.19
7.74
3.72
8.71
4.15
2.83
1.35
3.12
1.50
3.38
1.61
4.08
1.95
4.93
2.34
5.53
2.64
6.49
3.07
7.58
3.59
8.52
4.02
24689 24994 25298 25603 25908 26213 26518 26822 27127 27432 27737 28042 28346 28651 28956 29261
3.59
2.05
3.88
2.21
4.90
2.78
5.86
3.32
6.93
3.92
7.95
4.49
9.17
5.18
10.30
5.79
3.51
1.98
3.79
2.14
4.80
2.69
5.73
3.22
6.77
3.79
7.77
4.34
8.97
5.00
10.06
5.58
3.44
1.92
3.72
2.07
4.69
2.61
5.60
3.10
6.62
3.66
7.60
4.18
8.77
4.83
9.85
5.41
3.37
1.85
3.63
1.99
4.59
2.52
5.48
3.00
6.47
3.54
7.44
4.05
8.58
4.67
9.63
5.22
3.29
1.79
3.56
1.94
4.49
2.43
5.37
2.90
6.33
3.41
7.28
3.92
8.40
4.52
9.42
5.04
3.22
1.73
3.48
1.88
4.39
2.34
5.25
2.81
6.20
3.31
7.12
3.79
8.21
4.36
9.22
4.88
3.16
1.69
3.41
1.82
4.30
2.27
5.15
2.72
6.07
3.21
6.97
3.67
8.04
4.21
9.03
4.72
3.09
1.63
3.34
1.75
4.21
2.20
5.03
2.62
5.93
3.09
6.82
3.56
7.88
4.08
8.84
4.58
3.03
1.57
3.28
1.70
4.13
2.14
4.93
2.55
5.82
3.00
6.68
3.44
7.70
3.95
8.65
4.43
2.97
1.53
3.21
1.64
4.04
2.07
4.84
2.48
5.69
2.90
6.53
3.32
7.55
3.83
8.47
4.29
2.91
1.48
3.15
1.60
3.96
2.01
4.74
2.39
5.58
2.81
6.40
3.22
7.39
3.72
8.30
4.15
2.86
1.44
3.09
1.54
3.88
1.94
4.64
2.32
5.47
2.72
6.27
3.12
7.25
3.60
8.14
4.02
2.80
1.40
3.03
1.50
3.80
1.88
4.55
2.24
5.35
2.64
6.15
3.03
7.10
3.48
7.98
3.91
2.74
1.35
2.97
1.45
3.73
1.83
4.46
2.18
5.25
2.56
6.02
2.93
6.96
3.38
7.82
3.79
2.69
1.31
2.91
1.41
3.66
1.78
4.37
2.11
5.15
2.49
5.91
2.84
6.82
3.28
7.66
3.67
2.64
1.26
2.86
1.37
3.59
1.72
4.29
2.05
5.04
2.40
5.79
2.75
6.69
3.18
7.51
3.57
To solve for live loads for clear spans shown in the Safe Load
Column (or lesser clear spans), multiply the live load of the
shortest clear span shown in the Load Table by the (the
shortest clear span shown in the Load Table + 203 mm)2 and
divide by (the actual clear span + 203 mm)2. The live load
shall not exceed the safe uniform load.
* The safe uniform load for the clear spans shown in the Safe
Load Column is equal to (Safe Load) / (Clear span + 203).
(The added 203 millimeters is required to obtain the proper
length on which the Load Tables were developed).
In no case shall the safe uniform load, for clear spans less
than the minimum clear span shown in the Safe Load
Column, exceed the uniform load calculated for the minimum clear span listed in the Safe Load Column.
76
The black figures in the following table give the TOTAL safe
factored uniformly distributed load-carrying capacities, in
kiloNewtons per meter (kN/m) of LRFD DLH- Series Steel
Joists. The weight (kN/m) of the factored DEAD loads, including the joists, must in all cases be deducted to determine the
factored LIVE load-carrying capacities of the joists. The
approximate DEAD load of the joist may be determined from
the weights shown in the tables. All loads shown are for roof
construction only.
The RED figures in this load table are the unfactored, nominal
LIVE loads (kiloNewtons per meter) of joist which will produce
an approximate deflection of 1/360 of the span. LIVE loads
which produce a deflection of 1/240 of the span may be
obtained by multiplying the RED figures by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
When holes are required in top or bottom chords, the carrying capacities must be reduced in proportion to the reduction
of chord areas.
The top chords are considered as being stayed laterally by
the roof deck.
LRFD
METRIC LOAD TABLE FOR DEEP LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Approx
Approx Depth SAFELOAD*
in kN
Mass
Mass
in
(kN/m)
(kg/m)
(mm)
Between
(Joists only) (Joists only)
18593-26822 27127
52DLH10
0.36
37
1321
178.1
6.52
2.49
52DLH11
0.38
39
1321
195.4
7.15
2.72
52DLH12
0.42
43
1321
218.1
7.99
2.97
52DLH13
0.50
51
1321
264.8
9.69
3.60
52DLH14
0.57
58
1321
302.9
11.09
4.02
52DLH15
0.61
63
1321
340.2
12.45
4.53
52DLH16
0.66
67
1321
366.9
13.44
5.04
52DLH17
0.76
77
1321
422.3
15.45
5.76
6.37
2.40
7.00
2.64
7.81
2.87
9.47
3.48
10.87
3.88
12.19
4.39
13.15
4.88
15.12
5.56
6.23
2.32
6.85
2.53
7.63
2.78
9.28
3.37
10.63
3.76
11.93
4.24
12.87
4.72
14.79
5.38
6.10
2.24
6.69
2.46
7.48
2.69
9.06
3.26
10.42
3.63
11.66
4.11
12.58
4.58
14.46
5.21
5.97
2.18
6.54
2.39
7.31
2.61
8.88
3.15
10.20
3.53
11.42
3.96
12.32
4.43
14.16
5.04
5.84 5.71 5.60 5.49 5.38 5.27 5.16 5.05 4.96 4.88 4.77
2.11 2.04 1.98 1.92 1.86 1.80 1.75 1.69 1.66 1.60 1.56
6.41 6.28 6.15 6.01 5.91 5.77 5.66 5.56 5.45 5.34 5.25
2.30 2.23 2.17 2.10 2.04 1.97 1.92 1.86 1.80 1.75 1.70
7.15 7.00 6.87 6.72 6.58 6.45 6.32 6.21 6.08 5.97 5.86
2.52 2.45 2.37 2.30 2.23 2.17 2.10 2.04
1.97 1.92 1.86
8.69 8.51 8.34 8.16 8.01 7.83 7.68 7.53 7.39 7.24 7.11
3.05 2.96 2.87 2.78 2.69 2.62 2.53 2.48 2.39 2.32 2.26
10.00 9.78 9.58 9.41 9.21 9.04 8.86 8.69 8.53 8.36 8.20
3.41 3.31 3.21 3.10 3.02 2.93 2.83 2.75 2.68 2.59 2.52
11.18 10.94 10.72 10.50 10.28 10.09 9.87 9.69 9.50 9.32 9.15
3.85 3.73 3.60 3.50 3.40 3.29 3.19 3.10 3.02 2.93 2.84
12.06 11.82 11.55 11.33 11.09 10.87 10.66 10.46 10.24 10.04
9.87
4.29 4.15 4.02 3.89 3.79 3.67 3.57 3.45 3.35 3.26 3.16
13.87 13.57 13.30 13.02 12.76 12.52 12.25 12.01 11.79 11.55 11.33
4.88 4.72 4.59 4.43 4.31 4.17 4.07 3.94 3.83 3.72 3.60
20117-29261 29566 29870 30175 30480 30785 31090 31394 31699 32004 32309 32614 32918 33223 33528 33833 34138
56DLH11
0.38
39
1422
187.4
56DLH12
0.44
45
1422
215.5
56DLH13
0.50
51
1422
260.8
56DLH14
0.57
58
1422
294.9
56DLH15
0.61
63
1422
336.9
56DLH16
0.67
68
1422
363.6
56DLH17
0.74
76
1422
419.0
6.30 6.19 6.06 5.95 5.84 5.73 5.62 5.53 5.42 5.34 5.23 5.14 5.05 4.96 4.88 4.79
2.46 2.37 2.30 2.23 2.17 2.11 2.04 1.98 1.94 1.88 1.82 1.78 1.72 1.67 1.64 1.60
7.24 7.09 6.96 6.82 6.69 6.56 6.45 6.32 6.21 6.08 5.97 5.86 5.75 5.66 5.56 5.45
2.68 2.59 2.52 2.45 2.37 2.30 2.23 2.18 2.11 2.05 1.99 1.94 1.89 1.83 1.79 1.73
8.77 8.62 8.44 8.29 8.14 7.99 7.83 7.68 7.53 7.39 7.24 7.11 6.98 6.87 6.74 6.63
3.25 3.15 3.05 2.97 2.87 2.78 2.71 2.64 2.55 2.49 2.42 2.34 2.29 2.21 2.17 2.11
9.91 9.71 9.52 9.34 9.17 8.99 8.82 8.66 8.49 8.34 8.20 8.05 7.90 7.77 7.63 7.50
3.63 3.53 3.41 3.32 3.22 3.12 3.05 2.94 2.86 2.77 2.71 2.64 2.55 2.49 2.43 2.36
11.33 11.12 10.90 10.68 10.46 10.26 10.06 9.87 9.69 9.50 9.32 9.17 8.99 8.82 8.66 8.51
4.10 3.96 3.85 3.73 3.61 3.53 3.41 3.32 3.22 3.13 3.05 2.97 2.88 2.80 2.74 2.65
12.23 11.99 11.75 11.51 11.29 11.07 10.85 10.66 10.46 10.26 10.06 9.89 9.71 9.54 9.36 9.19
4.56 4.43 4.29 4.15 4.04 3.92 3.82 3.70 3.60 3.50 3.40 3.31 3.22 3.12 3.05 2.97
14.07 13.79 13.52 13.24 13.00 12.74 12.49 12.25 12.01 11.79 11.58 11.38 11.16 10.96 10.77 10.57
5.19 5.03 4.88 4.74 4.61 4.46 4.34 4.21 4.10 3.98 3.88 3.76 3.66 3.57 3.47 3.37
77
LRFD
METRIC LOAD TABLE FOR LONGSPAN STEEL JOISTS, LRFD DLH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Approx
Approx
Depth
Mass
Mass
in
(kN/m)
(kg/m)
(mm)
(Joists only) (Joists only)
0.42
1524
60DLH12
43
SAFELOAD*
in kN
Between
21336-30175 30480-31699
207.5
207.5
60DLH13
0.51
52
1524
252.2
252.2
60DLH14
0.58
60
1524
280.2
280.2
60DLH15
0.63
64
1524
328.9
328.9
60DLH16
0.67
68
1524
361.6
361.6
60DLH17
0.76
77
1524
415.6
415.6
60DLH18
0.86
88
1524
479.7
479.7
64DLH12
0.45
46
1626
200.1
200.1
64DLH13
0.50
51
1626
242.8
242.8
64DLH14
0.58
60
1626
278.2
278.2
64DLH15
0.63
64
1626
318.9
318.9
64DLH16
0.67
68
1626
358.9
358.9
64DLH17
0.76
77
1626
413.6
413.6
64DLH18
0.86
88
1626
477.7
477.7
68DLH13
0.54
55
1727
233.5
233.5
68DLH14
0.58
60
1727
268.8
268.8
22860-30175 30408-34138
24384-30175 30480-36576
68DLH15
0.64
65
1727
301.5
301.5
68DLH16
0.72
73
1727
357.6
357.6
68DLH17
0.80
82
1727
403.0
403.0
68DLH18
0.89
91
1727
466.3
466.3
68DLH19
0.98
100
1727
537.1
537.1
25603-30175 30480-39014
72DLH14
0.60
61
1829
261.5
261.5
72DLH15
0.64
65
1829
299.5
299.5
72DLH16
0.73
74
1829
346.2
346.2
72DLH17
0.82
83
1829
389.6
389.6
72DLH18
0.86
88
1829
456.3
456.3
72DLH19
1.02
104
1829
535.1
535.1
6.45
2.45
7.83
2.96
8.71
3.15
10.22
3.72
11.23
4.15
12.91
4.72
14.90
5.34
6.32 6.21 6.10 5.99 5.91 5.80 5.71 5.60 5.51 5.42 5.34 5.25 5.16 5.07 4.99
2.37 2.30 2.24 2.18 2.13 2.07 2.01 1.95 1.91 1.86 1.80 1.76 1.72 1.67 1.64
7.68 7.55 7.42 7.28 7.15 7.04 6.91 6.80 6.69 6.58 6.47 6.37 6.26 6.17 6.06
2.87 2.78 2.72 2.64 2.56 2.49 2.43 2.37 2.30 2.24 2.20 2.14 2.08 2.02 1.97
8.55 8.38 8.23 8.09 7.94 7.79 7.66 7.53 7.39 7.26 7.15 7.02 6.91 6.78 6.67
3.06 2.99 2.90 2.81 2.75 2.67 2.59 2.52 2.48 2.40 2.34 2.27 2.21 2.17 2.11
10.02 9.85 9.67 9.50 9.34 9.17 9.01 8.86 8.71 8.58 8.42 8.29 8.16 8.03 7.90
3.61 3.53 3.42 3.32 3.25 3.15 3.06 2.99 2.91 2.83 2.77 2.69 2.62 2.55 2.49
11.03 10.81 10.61 10.42 10.24 10.06 9.87 9.71 9.54 9.36 9.21 9.06 8.90 8.75 8.60
4.04 3.92 3.82 3.72 3.60 3.51 3.42 3.32 3.25 3.16 3.07 3.00 2.93 2.86 2.77
12.67 12.45 12.21 11.99 11.77 11.58 11.36 11.16 10.96 10.79 10.59 10.42 10.24 10.06 9.91
4.59 4.46 4.34 4.23 4.13 4.01 3.89 3.80 3.70 3.60 3.51 3.42 3.32 3.25 3.16
14.62 14.36 14.09 13.83 13.59 13.35 13.11 12.89 12.65 12.43 12.23 12.01 11.82 11.62 11.42
5.21 5.04 4.91 4.77 4.65 4.52 4.42 4.29 4.17 4.07 3.96 3.88 3.77 3.67 3.59
34442 34747 35052 35357 35662 35966 36271 36576 36881 37186 37490 37795 38100 38405 38710 39014
5.77 5.66 5.58 5.49 5.40 5.31 5.23 5.14 5.05 4.99 4.90 4.83 4.77 4.68 4.61 4.55
2.23 2.18 2.13 2.07 2.01 1.97 1.92 1.88 1.82 1.78 1.73 1.69 1.66 1.61 1.59 1.54
7.02 6.89 6.78 6.67 6.56 6.45 6.37 6.26 6.15 6.06 5.97 5.88 5.77 5.69 5.62 5.53
2.71 2.64 2.56 2.49 2.45 2.37 2.32 2.26 2.21 2.15 2.10 2.05 1.99 1.95 1.91 1.86
8.03 7.88 7.74 7.63 7.50 7.37 7.26 7.13 7.02 6.91 6.80 6.69 6.58 6.47 6.39 6.28
2.90 2.81 2.75 2.68 2.61 2.53 2.49 2.42 2.36 2.30 2.24 2.20 2.14 2.08 2.04 1.98
9.21 9.06 8.90 8.75 8.62 8.47 8.34 8.20 8.07 7.94 7.83 7.70 7.59 7.46 7.35 7.24
3.41 3.32 3.25 3.16 3.07 3.00 2.93 2.86 2.78 2.72 2.65 2.58 2.52 2.48 2.40 2.34
10.37 10.20 10.02 9.85 9.69 9.52 9.36 9.21 9.06 8.90 8.77 8.62 8.49 8.36 8.23 8.09
3.82 3.70 3.61 3.53 3.42 3.34 3.26 3.18 3.10 3.03 2.96 2.88 2.81 2.75 2.68 2.62
11.95 11.73 11.53 11.33 11.14 10.96 10.77 10.59 10.42 10.24 10.09 9.93 9.76 9.61 9.45 9.32
4.34 4.23 4.13 4.01 3.91 3.82 3.72 3.61 3.54 3.45 3.37 3.29 3.21 3.13 3.06 2.99
13.79 13.55 13.30 13.09 12.84 12.65 12.43 12.23 12.01 11.82 11.64 11.44 11.27 11.09 10.92 10.74
4.91 4.78 4.67 4.53 4.43 4.31 4.20 4.11 3.99 3.89 3.80 3.72 3.63 3.54 3.45 3.38
36881 37186 37490 37795 38100 38405 38710 39014 39319 39624 39929 40234 40538 40843 41148 41453
6.30 6.21 6.10 6.01 5.93 5.84 5.75 5.66 5.58 5.51 5.42 5.34 5.27 5.18 5.12 5.05
2.49 2.45 2.39 2.32 2.26 2.21 2.17 2.11 2.07 2.01 1.97 1.94 1.89 1.85 1.80 1.76
7.26 7.15 7.04 6.93
6.82 6.74 6.63 6.54 6.43 6.34 6.26 6.15 6.06 5.97 5.88 5.82
2.68 2.61 2.55 2.49 2.43 2.37 2.32 2.26 2.21 2.15 2.11 2.05 2.01 1.97 1.94 1.89
8.14 7.99 7.88 7.74 7.61 7.50 7.37 7.26 7.15 7.04 6.93 6.82 6.74 6.63 6.54 6.43
3.00 2.93 2.86 2.78 2.72 2.65 2.59 2.53 2.48 2.42 2.36 2.30 2.26 2.21 2.15 2.11
9.65 9.47 9.34 9.19 9.04 8.90 8.75 8.62 8.49 8.36 8.23 8.12 7.99 7.88 7.74 7.63
3.53 3.44 3.35 3.28 3.19 3.12 3.05 2.97 2.90 2.84 2.77 2.71 2.65 2.59 2.53 2.49
10.87 10.70 10.52 10.37 10.22 10.06 9.91 9.76 9.61 9.47 9.34 9.19 9.06 8.93 8.82 8.69
4.01 3.91 3.82 3.73 3.63 3.56 3.47 3.38 3.32 3.23 3.16 3.09 3.03 2.96 2.88 2.83
12.58 12.39 12.19 12.01 11.82 11.64 11.47 11.29 11.12 10.96 10.79 10.63 10.48 10.33 10.17 10.04
4.53 4.43 4.33 4.21 4.13 4.02
3.92 3.83 3.75 3.66 3.59 3.50 3.41 3.35 3.28 3.19
14.49 14.25 14.03 13.81 13.59 13.37 13.15 12.95 12.76 12.56 12.36 12.19 11.99 11.82 11.64 11.49
5.15 5.02 4.90 4.78 4.67 4.56 4.45 4.34 4.24 4.15 4.05 3.96 3.88 3.79 3.70 3.61
39319 39624 39929 40234 40538 40843 41148 41453 41758 42062 42367 42672 42977 43282 43586 43891
6.63 6.52 6.43 6.34 6.23 6.15 6.06 5.99 5.91 5.82 5.73 5.66 5.58 5.51 5.42 5.36
2.49 2.43 2.37 2.32 2.26 2.21 2.17 2.13 2.08 2.02 1.98 1.94 1.91 1.86 1.82 1.79
7.59 7.48 7.35 7.24 7.13 7.04 6.93 6.82 6.74 6.63 6.54 6.45 6.37 6.26 6.17 6.10
2.78 2.72 2.67 2.59 2.53 2.49 2.43 2.37 2.33 2.27 2.21 2.18 2.14 2.08 2.04 1.99
8.77 8.64 8.53 8.40 8.27 8.16 8.05 7.94 7.83 7.72 7.61 7.50 7.39 7.31 7.20 7.11
3.28 3.19 3.12 3.05 2.99 2.91 2.86 2.78 2.74 2.67 2.61 2.55 2.49 2.46 2.40 2.34
9.87 9.74 9.58 9.45 9.32 9.19 9.06 8.93 8.80 8.69 8.55 8.44 8.34 8.23 8.12 8.01
3.73 3.64 3.57 3.48 3.40 3.32 3.26 3.18 3.10 3.05 2.99 2.91 2.86 2.78 2.74 2.68
11.55 11.38 11.20 11.05 10.87 10.72 10.57 10.48 10.28 10.13 10.00 9.85 9.71 9.58 9.45 9.32
4.21 4.13 4.02 3.94 3.86 3.76 3.67 3.60 3.53 3.44 3.37 3.31 3.23 3.16 3.09 3.05
13.55 13.33 13.13 12.93 12.74 12.54 12.36 12.19 12.01 11.84 11.66 11.51 11.33 11.18 11.03 10.87
4.78 4.68 4.56 4.46 4.37 4.27 4.17 4.08 3.99 3.91 3.83 3.75 3.66 3.60 3.51 3.44
To solve for live loads for clear spans shown in the Safe
Load Column (or lesser clear spans), multiply the live load
of the shortest clear span shown in the Load Table by (the
shortest clear span shown in the Load Table + 203 mm)2
and divide by (the actual clear span + 203 mm)2. The live
load shall not exceed the safe uniform load.
* The safe factored uniform load for the clear spans shown
in the Safe Load Column is equal to (Safe Load) / (Clear
span + 203). (The added 203 millimeters is required to
obtain the proper length on which the Load Tables were
developed).
In no case shall the safe factored uniform load, for clear
spans less than the minimum clear span shown in the
Safe Load Column, exceed the uniform load calculated for
the minimum clear span listed in the Safe Load Column.
78
The black figures in the following table give the TOTAL safe
uniformly distributed load-carrying capacities, in kiloNewtons
per meter (kN/m) of ASD DLH-Series Steel Joists. The weight
(kN/m) of the DEAD loads, including the joists, must in all
cases be deducted to determine the LIVE load-carrying capacities of the joists. The approximate DEAD load of the joist may
be determined from the weights shown in the tables. All loads
shown are for roof construction only.
The RED figures in this load table are the nominal LIVE
loads (kiloNewtons per meter) of joist which will produce an
approximate deflection of 1/360 of the span. LIVE loads
which produce a deflection of 1/240 of the span may be
obtained by multiplying the RED figures by 1.5. In no case
shall the TOTAL load capacity of the joists be exceeded.
When holes are required in top or bottom chords, the carrying capacities must be reduced in proportion to the reduction
of chord areas.
The top chords are considered as being stayed laterally by
the roof deck.
ASD
METRIC LOAD TABLE FOR DEEP LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Joist
Designation
Approx
Approx Depth SAFELOAD*
CLEAR SPAN (MM)
Mass
Mass
in
in kN
(kN/m)
(kg/m)
(mm) Between
(Joists only) (Joists only)
18593-26822 27127 27432 27737 28042 28346 28651 28956 29261 29566 29870 30175 30480 30785 31090 31394 31699
52DLH10
0.36
37
1321
118.8
4.34 4.24 4.15 4.07 3.98 3.89 3.80 3.73 3.66 3.59 3.51 3.44 3.37 3.31 3.25 3.18
2.49 2.40 2.32 2.24 2.18 2.11 2.04 1.98 1.92 1.86 1.80 1.75 1.69 1.66 1.60 1.56
52DLH11
0.38
39
1321
130.3
4.77 4.67 4.56 4.46 4.36 4.27 4.18 4.10 4.01 3.94 3.85 3.77 3.70 3.63 3.56 3.50
2.72 3.96 3.80 3.69 3.59 3.45 3.34 3.26 3.15 3.06 2.95 2.88 2.80 2.71 2.62 2.56
52DLH12
0.42
43
1321
145.5
5.32 5.21 5.09 4.99 4.87 4.77 4.67 4.58 4.48 4.39 4.30 4.21 4.14 4.05 3.98 3.91
2.97 2.87 2.78 2.69 2.61 2.52 2.45 2.37 2.30 2.23 2.17 2.10 2.04 1.97 1.92 1.86
52DLH13
0.50
51
1321
176.6
6.46 6.31 6.18 6.04 5.92 5.79 5.67 5.56 5.44 5.34 5.22 5.12 5.02 4.93 4.83 4.74
3.60 3.48 3.37 3.26 3.15 3.05 2.96 2.87 2.78 2.69 2.62 2.53 2.48 2.39 2.32 2.26
52DLH14
0.57
58
1321
201.9
7.39 7.25 7.09 6.94 6.80 6.66 6.52 6.39 6.27 6.14 6.02 5.91 5.79 5.69 5.57 5.47
4.02 3.88 3.76 3.63 3.53 3.41 3.31 3.21 3.10 3.02 2.93 2.83 2.75 2.68 2.59 2.52
52DLH15
0.61
63
1321
226.9
8.30 8.12 7.95 7.77 7.61 7.45 7.29 7.15 7.00 6.85 6.72 6.58 6.46 6.33 6.21 6.10
4.53 4.39 4.24 4.11 3.96 3.85 3.73 3.60 3.50 3.40 3.29 3.19 3.10 3.02 2.93 2.84
52DLH16
0.66
67
1321
244.7
8.96 8.77 8.58 8.39 8.21 8.04 7.88 7.70 7.55 7.39 7.25 7.10 6.97 6.82 6.69 6.58
5.04 4.88 4.72 4.58 4.43 4.29 4.15 4.02 3.89 3.79 3.67 3.57 3.45 3.35 3.26 3.16
52DLH17
0.76
77
1321
281.6
10.30 10.08 9.86 9.64 9.44 9.25 9.04 8.87 8.68 8.50 8.34 8.17 8.01 7.86 7.70 7.55
5.76 5.56 5.38 5.21 5.04 4.88 4.72 4.59 4.43 4.31 4.17 4.07 3.94 3.83 3.72 3.60
20117-29261 29566 29870 30175 30480 30785 31090 31394 31699 32004 32309 32614 32918 33223 33528 33833 34138
56DLH11
0.38
39
1422
125.0
56DLH12
0.44
45
1422
143.7
56DLH13
0.50
51
1422
173.9
56DLH14
0.57
58
1422
196.6
56DLH15
0.61
63
1422
224.6
56DLH16
0.67
68
1422
242.4
56DLH17
0.74
76
1422
279.3
4.20
2.46
4.83
2.68
5.85
3.25
6.61
3.63
7.55
4.10
8.15
4.56
9.38
5.19
4.13
2.37
4.72
2.59
5.74
3.15
6.47
3.53
7.41
3.96
7.99
4.43
9.19
5.03
4.04
2.30
4.64
2.52
5.63
3.05
6.34
3.41
7.26
3.85
7.83
4.29
9.01
4.88
3.96
2.23
4.55
2.45
5.53
2.97
6.23
3.32
7.12
3.73
7.67
4.15
8.82
4.74
3.89
2.17
4.46
2.37
5.42
2.87
6.11
3.22
6.97
3.61
7.53
4.04
8.66
4.61
79
3.82
2.11
4.37
2.30
5.32
2.78
5.99
3.12
6.84
3.53
7.38
3.92
8.49
4.46
3.75
2.04
4.30
2.23
5.22
2.71
5.88
3.05
6.71
3.41
7.23
3.82
8.33
4.34
3.69
1.98
4.21
2.18
5.12
2.64
5.77
2.94
6.58
3.32
7.10
3.70
8.17
4.21
3.61
1.94
4.14
2.11
5.02
2.55
5.66
2.86
6.46
3.22
6.97
3.60
8.01
4.10
3.56
1.88
4.05
2.05
4.93
2.49
5.56
2.77
6.33
3.13
6.84
3.50
7.86
3.98
3.48
1.82
3.98
1.99
4.83
2.42
5.47
2.71
6.21
3.05
6.71
3.40
7.72
3.88
3.42
1.78
3.91
1.94
4.74
2.34
5.37
2.64
6.11
2.97
6.59
3.31
7.58
3.76
3.37
1.72
3.83
1.89
4.65
2.29
5.26
2.55
5.99
2.88
6.47
3.22
7.44
3.66
3.31
1.67
3.77
1.83
4.58
2.21
5.18
2.49
5.88
2.80
6.36
3.12
7.31
3.57
3.25
1.64
3.70
1.79
4.49
2.17
5.09
2.43
5.77
2.74
6.24
3.05
7.18
3.47
3.19
1.60
3.63
1.73
4.42
2.11
5.00
2.36
5.67
2.65
6.12
2.97
7.04
3.37
ASD
METRIC LOAD TABLE FOR DEEP LONGSPAN STEEL JOISTS, DLH-SERIES
Based on a 345 MPa Maximum Yield Strength - Loads Shown in KiloNewtons per Meter (kN/m)
Approx
Approx Depth
Mass
Mass
in
(kN/m)
(kg/m) (mm)
(Joists only) (Joists only)
0.42
60DLH12
43
1524
Joist
Designation
SAFELOAD*
in kN
Between
21336-30175 30480-31699 32004 32309 32614 32918 33223 33528 33833 34138 34442 34747 35052 35357 35662 35966 36271 36576
138.3
138.3
60DLH13
0.51
52
1524
168.1
168.1
60DLH14
0.58
60
1524
186.8
186.8
60DLH15
0.63
64
1524
219.2
219.2
60DLH16
0.67
68
1524
241.0
241.0
60DLH17
0.76
77
1524
277.1
277.1
60DLH18
0.86
88
1524
319.8
319.8
64DLH12
0.45
46
1626
133.4
133.4
64DLH13
0.50
51
1626
161.9
161.9
4.30
2.45
5.22
2.96
5.80
3.15
6.81
3.72
7.48
4.15
8.61
4.72
9.93
5.34
4.21
2.37
5.12
2.87
5.70
3.06
6.68
3.61
7.35
4.04
8.44
4.59
9.74
5.21
4.14
2.30
5.03
2.78
5.58
2.99
6.56
3.53
7.20
3.92
8.30
4.46
9.57
5.04
4.07
2.24
4.94
2.72
5.48
2.90
6.45
3.42
7.07
3.82
8.14
4.34
9.39
4.91
3.99
2.18
4.85
2.64
5.39
2.81
6.33
3.32
6.94
3.72
7.99
4.23
9.22
4.77
3.94
2.13
4.77
2.56
5.29
2.75
6.23
3.25
6.82
3.60
7.85
4.13
9.06
4.65
3.86
2.07
4.69
2.49
5.19
2.67
6.11
3.15
6.71
3.51
7.72
4.01
8.90
4.52
3.80
2.01
4.61
2.43
5.10
2.59
6.01
3.06
6.58
3.42
7.57
3.89
8.74
4.42
3.73
1.95
4.53
2.37
5.02
2.52
5.91
2.99
6.47
3.32
7.44
3.80
8.59
4.29
3.67
1.91
4.46
2.30
4.93
2.48
5.80
2.91
6.36
3.25
7.31
3.70
8.43
4.17
3.61
1.86
4.39
2.24
4.84
2.40
5.72
2.83
6.24
3.16
7.19
3.60
8.28
4.07
3.56
1.80
4.31
2.20
4.77
2.34
5.61
2.77
6.14
3.07
7.06
3.51
8.15
3.96
3.50
1.76
4.24
2.14
4.68
2.27
5.53
2.69
6.04
3.00
6.94
3.42
8.01
3.88
3.44
1.72
4.17
2.08
4.61
2.21
5.44
2.62
5.93
2.93
6.82
3.32
7.88
3.77
3.38
1.67
4.11
2.02
4.52
2.17
5.35
2.55
5.83
2.86
6.71
3.25
7.74
3.67
3.32
1.64
4.04
1.97
4.45
2.11
5.26
2.49
5.73
2.77
6.61
3.16
7.61
3.59
22860-30175 30480-34138 34442 34747 35052 35357 35662 35966 36271 36576 36881 37186 37490 37795 38100 38405 38710 39014
64DLH14
0.58
60
1626
185.4
185.4
64DLH15
0.63
64
1626
212.6
212.6
64DLH16
0.67
68
1626
239.3
239.3
64DLH17
0.76
77
1626
275.7
275.7
64DLH18
0.86
88
1626
318.4
318.4
3.85
2.23
4.68
2.71
5.35
2.90
6.14
3.41
6.91
3.82
7.96
4.34
9.19
4.91
3.77
2.18
4.59
2.64
5.25
2.81
6.04
3.32
6.80
3.70
7.82
4.23
9.03
4.78
3.72
2.13
4.52
2.56
5.16
2.75
5.93
3.25
6.68
3.61
7.69
4.13
8.87
4.67
3.66
2.07
4.45
2.49
5.09
2.68
5.83
3.16
6.56
3.53
7.55
4.01
8.72
4.53
3.60
2.01
4.37
2.45
5.00
2.61
5.74
3.07
6.46
3.42
7.42
3.91
8.56
4.43
3.54
1.97
4.30
2.37
4.91
2.53
5.64
3.00
6.34
3.34
7.31
3.82
8.43
4.31
3.48
1.92
4.24
2.32
4.84
2.49
5.56
2.93
6.24
3.26
7.18
3.72
8.28
4.20
3.42
1.88
4.17
2.26
4.75
2.42
5.47
2.86
6.14
3.18
7.06
3.61
8.15
4.11
3.37
1.82
4.10
2.21
4.68
2.36
5.38
2.78
6.04
3.10
6.94
3.54
8.01
3.99
3.32
1.78
4.04
2.15
4.61
2.30
5.29
2.72
5.93
3.03
6.82
3.45
7.88
3.89
3.26
1.73
3.98
2.10
4.53
2.24
5.22
2.65
5.85
2.96
6.72
3.37
7.76
3.80
3.22
1.69
3.92
2.05
4.46
2.20
5.13
2.58
5.74
2.88
6.62
3.29
7.63
3.72
3.18
1.66
3.85
1.99
4.39
2.14
5.06
2.52
5.66
2.81
6.50
3.21
7.51
3.63
3.12
1.61
3.79
1.95
4.31
2.08
4.97
2.48
5.57
2.75
6.40
3.13
7.39
3.54
3.07
1.59
3.75
1.91
4.26
2.04
4.90
2.40
5.48
2.68
6.30
3.06
7.28
3.45
3.03
1.54
3.69
1.86
4.18
1.98
4.83
2.34
5.39
2.62
6.21
2.99
7.16
3.38
24384-30175 30480-36576 36881 37186 37490 37795 38100 38405 38710 39014 39319 39624 39929 40234 40538 40843 41148 41453
0.54
55
1727
68DLH14
0.58
60
1727
179.2
179.2
68DLH15
0.64
65
1727
201.0
201.0
68DLH13
155.6
155.6
68DLH16
0.72
73
1727
238.4
238.4
68DLH17
0.80
82
1727
268.6
268.6
68DLH18
0.89
91
1727
310.9
310.9
68DLH19
0.98
100
1727
358.0
358.0
72DLH14
0.60
61
1829
174.3
174.3
72DLH15
0.64
65
1829
199.7
199.7
4.20
2.49
4.84
2.68
5.42
3.00
6.43
3.53
7.25
4.01
8.39
4.53
9.66
5.15
4.14
2.45
4.77
2.61
5.32
2.93
6.31
3.44
7.13
3.91
8.26
4.43
9.50
5.02
4.07
2.39
4.69
2.55
5.25
2.86
6.23
3.35
7.01
3.82
8.12
4.33
9.35
4.90
4.01
2.32
4.62
2.49
5.16
2.78
6.12
3.28
6.91
3.73
8.01
4.21
9.20
4.78
3.95
2.26
4.55
2.43
5.07
2.72
6.02
3.19
6.81
3.63
7.88
4.13
9.06
4.67
3.89
2.21
4.49
2.37
5.00
2.65
5.93
3.12
6.71
3.56
7.76
4.02
8.91
4.56
3.83
2.17
4.42
2.32
4.91
2.59
5.83
3.05
6.61
3.47
7.64
3.92
8.77
4.45
3.77
2.11
4.36
2.26
4.84
2.53
5.74
2.97
6.50
3.38
7.53
3.83
8.63
4.34
3.72
2.07
4.29
2.21
4.77
2.48
5.66
2.90
6.40
3.32
7.41
3.75
8.50
4.24
3.67
2.01
4.23
2.15
4.69
2.42
5.57
2.84
6.31
3.23
7.31
3.66
8.37
4.15
3.61
1.97
4.17
2.11
4.62
2.36
5.48
2.77
6.23
3.16
7.19
3.59
8.24
4.05
3.56
1.94
4.10
2.05
4.55
2.30
5.41
2.71
6.12
3.09
7.09
3.50
8.12
3.96
3.51
1.89
4.04
2.01
4.49
2.26
5.32
2.65
6.04
3.03
6.99
3.41
7.99
3.88
3.45
1.85
3.98
1.97
4.42
2.21
5.25
2.59
5.95
2.96
6.88
3.35
7.88
3.79
3.41
1.80
3.92
1.94
4.36
2.15
5.16
2.53
5.88
2.88
6.78
3.28
7.76
3.70
3.37
1.76
3.88
1.89
4.29
2.11
5.09
2.49
5.79
2.83
6.69
3.19
7.66
3.61
25603-30175 30480-39014 39319 39624 39929 40234 40538 40843 41148 41453 41758 42062 42367 42672 42977 43282 43586 43891
72DLH16
0.73
74
1829
230.8
230.8
72DLH17
0.82
83
1829
259.7
259.7
72DLH18
0.86
88
1829
304.2
304.2
72DLH19
1.02
104
1829
356.7
356.7
4.42
2.49
5.06
2.78
5.85
3.28
6.58
3.73
7.70
4.21
9.03
4.78
4.34
2.43
4.99
2.72
5.76
3.19
6.49
3.64
7.58
4.13
8.88
4.68
4.29
2.37
4.90
2.67
5.69
3.12
6.39
3.57
7.47
4.02
8.75
4.56
4.23
2.32
4.83
2.59
5.60
3.05
6.30
3.48
7.36
3.94
8.62
4.46
4.15
2.26
4.75
2.53
5.51
2.99
6.21
3.40
7.25
3.86
8.49
4.37
4.10
2.21
4.69
2.49
5.44
2.91
6.12
3.32
7.15
3.76
8.36
4.27
4.04
2.17
4.62
2.43
5.37
2.86
6.04
3.26
7.04
3.67
8.24
4.17
3.99
2.13
4.55
2.37
5.29
2.78
5.95
3.18
6.99
3.60
8.12
4.08
3.94
2.08
4.49
2.33
5.22
2.74
5.86
3.10
6.85
3.53
8.01
3.99
3.88
2.02
4.42
2.27
5.15
2.67
5.79
3.05
6.75
3.44
7.89
3.91
3.82
1.98
4.36
2.21
5.07
2.61
5.70
2.99
6.66
3.37
7.77
3.83
3.77
1.94
4.30
2.18
5.00
2.55
5.63
2.91
6.56
3.31
7.67
3.75
3.72
1.91
4.24
2.14
4.93
2.49
5.56
2.86
6.47
3.23
7.55
3.66
3.67
1.86
4.17
2.08
4.87
2.46
5.48
2.78
6.39
3.16
7.45
3.60
3.61
1.82
4.11
2.04
4.80
2.40
5.41
2.74
6.30
3.09
7.35
3.51
3.57
1.79
4.07
1.99
4.74
2.34
5.34
2.68
6.21
3.05
7.25
3.44
To solve for live loads for clear spans shown in the Safe
Load Column (or lesser clear spans), multiply the live load
of the shortest clear span shown in the Load Table by (the
shortest clear span shown in the Load Table + 203 mm)2
and divide by (the actual clear span + 203 mm)2. The live
load shall not exceed the safe uniform load.
* The safe uniform load for the clear spans shown in the
Safe Load Column is equal to (Safe Load) / (Clear span +
203). (The added 203 millimeters is required to obtain the
proper length on which the Load Tables were developed).
In no case shall the safe uniform load, for clear spans less
than the minimum clear span shown in the Safe Load
Column, exceed the uniform load calculated for the minimum clear span listed in the Safe Load Column.
80
STANDARD SPECIFICATIONS
FOR JOIST GIRDERS
Adopted by the Steel Joist Institute November 4, 1985
Revised to November 10, 2003 - Effective March 01, 2005
SECTION 1000.
SECTION 1002.
SCOPE
MATERIALS
1002.1 STEEL
SECTION 1001.
DEFINITION
Steel, Sheet and Strip, High-Strength, Low-Alloy, HotRolled and Cold-Rolled, with Improved Corrosion
Resistance, ASTM A606.
Steel, Sheet, Cold-Rolled, Carbon, Structural, HighStrength Low-Alloy and High-Strength Low-Alloy with
Improved Formability, ASTM A1008/A1008M.
Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability, ASTM A1011/A1011M.
* The term Yield Strength as used herein shall designate the yield level of a material as determined by the
applicable method outlined in paragraph 13.1, Yield
Point and in paragraph 13.2, Yield Strength, of ASTM
Standard A370, Standard Test Methods and
Definitions for Mechanical Testing of Steel Products, or
as specified in Section 1002.2 of this Specification.
81
JOIST GIRDERS
b) For connected members both having a specified minimum yield strength of 36 ksi (250 MPa) or one having a
specified minimum yield strength of 36 ksi (250 MPa),
and the other having a specified minimum yield strength
greater than 36 ksi (250 MPa).
1002.4 PAINT
b) Or, shall be a shop paint which meets the minimum performance requirements of the above listed specification.
SECTION 1003.
DESIGN AND
MANUFACTURE
1003.1 METHOD
Joist Girders shall be designed in accordance with this specification as simply supported primary members. All loads
shall be applied through steel joists, and will be equal in
magnitude and evenly spaced along the joist girder top
chord. Where any applicable design feature is not specifically covered herein, the design shall be in accordance with
the following specifications:
Design Basis:
Designs shall be made according to the provisions in this
Specification for either Load and Resistance Factor Design
(LRFD) or for Allowable Strength Design (ASD).
82
JOIST GIRDERS
Load Combinations:
Stresses:
LRFD:
When load combinations are not specified to the joist manufacturer, the required stress shall be computed for the factored loads based on the factors and load combinations as
follows:
1.4D
(1003.2-1)
(1003.2-2)
ASD:
For members with l
When load combinations are not specified to the joist manufacturer, the required stress shall be computed based on
the load combinations as follows:
4.71
QFy
QFy
Fcr = Q 0.658
D + ( L, or Lr, or S, or R )
Fe
Fy
(1003.2-3)
Where:
D = dead load due to the weight of the structural elements
and the permanent features of the structure
> 4.71
E
QFy
(1003.2-4)
S = snow load
Where Fe = Elastic bucking stress determined in
accordance with Equation 1003.2-5.
Fe =
required stress
ksi (MPa)
Fn
nominal stress
ksi (MPa)
resistance factor
Fn =
ksi (MPa)
Fn
nominal stress
ksi (MPa)
safety factor
Fn/ =
(1003.2-5)
(1003.2-6)
(1003.2-7)
In the above equations, l is taken as the distance, in inches (millimeters), between panel points for the chord members and the appropriate length for web members, and r is
the corresponding least radius of gyration of the member
or any component thereof. E is equal to 29,000 ksi
(200,000 MPa).
design stress
fu
2 E
allowable stress
83
JOIST GIRDERS
chord about its vertical axis shall not be less than l/240
where l is the distance between lines of bracing.
The top chord shall be designed as an axial loaded compression member. The radius of gyration of the top chord
about the vertical axis shall not be less than Span/575.
(1003.2-8)
(1003.2-9)
(1003.2-10)
(1003.2-11)
(1003.2-12)
(1003.2-13)
LRFD: w = 0.75
Design Shear Strength =
Rn = wFnw A = 0.45Fexx A
(1003.2-15)
ASD: w = 2.0
Allowable Shear Strength =
Rn / w = Fnw A/ w = 0.3Fexx A
(1003.2-16)
(d) Eccentricity
Made with E70 series electrodes or F7XX-EXXX fluxelectrode combinations . . . . . . . . . . . . .Fexx = 70 ksi (483 MPa)
Made with E60 series electrodes or F6XX-EXXX fluxelectrode combinations . . . . . . . . . . . . .Fexx = 60 ksi (414 MPa)
Tension or compression on groove or butt welds shall be
the same as those specified for the connected material.
In those cases where a single angle compression member is attached to the outside of the stem of a tee or double angle chord, due consideration shall be given to
eccentricity.
1003.4 MEMBERS
(a) Chords
The bottom chord shall be designed as an axially loaded
tension member. The radius of gyration of the bottom
84
JOIST GIRDERS
1003.5 CONNECTIONS
(a) Methods
Joint connections and splices shall be made by attaching the members to one another by arc or resistance
welding or other accredited methods.
1003.6 CAMBER
Joist Girders shall have approximate cambers in accordance with the following:
TABLE 1003.6-1
Top Chord Length
Approximate Camber
20'-0"
(6096 mm)
1/4"
(6 mm)
30'-0"
(9144 mm)
3/8"
(10 mm)
5/8"
(16 mm)
1"
(25 mm)
1 1/2"
(38 mm)
e) Undercut shall not exceed 1/16 inch (2 millimeters) for welds oriented parallel to the principal
stress.
2"
(51 mm)
2 3/4"
(70 mm)
3 1/2"
(89 mm)
4 1/4"
(108 mm)
5"
(127 mm)
g) Weld spatter that does not interfere with paint coverage is acceptable.
6"
(152 mm)
The specifying professional shall give consideration to coordinating Joist Girder camber with adjacent framing.
(b) Strength
(1) Joint Connections Joint connections shall develop
the maximum force due to any of the design loads,
but not less than 50 percent of the strength of the
member in tension or compression, whichever force is
the controlling factor in the selection of the member.
(2) Shop Splices - Shop splices may occur at any point
in chord or web members. Splices shall be designed
for the member force but not less than 50 percent of
the member strength. Members containing a butt
weld splice shall develop an ultimate tensile force of
at least 57 ksi (393 MPa) times the full design area of
the chord or web. The term member shall be
defined as all component parts comprising the chord
or web, at the point of splice.
85
JOIST GIRDERS
SECTION 1004.
APPLICATION
(b) Steel
Due consideration of the end reactions and all other vertical and lateral forces shall be taken by the specifying
professional in the design of the steel support. The ends
of Joist Girders shall extend a distance of not less than
4 inches (102 millimeters) over the steel supports and
shall have positive attachment to the support, either by
bolting or welding.
1004.1 USAGE
This specification shall apply to any type of structure where
steel joists are to be supported directly by Joist Girders
installed as hereinafter specified. Where Joist Girders are
used other than on simple spans under equal concentrated
gravity loading, as prescribed in Section 1003.1, they shall
be investigated and modified if necessary to limit the unit
stresses to those listed in Section 1003.2. The magnitude
and location of all loads and forces, other than equal concentrated gravity loading, shall be provided on the structural
drawings. The specifying professional shall design the supporting structure, including the design of columns, connections, and moment plates*. This design shall account for the
stresses caused by lateral forces and the stresses due to
connecting the bottom chord to the column or other support.
1004.5 BRACING
Joist Girders shall be proportioned such that they can be
erected without bridging (See Section 1004.9 for bracing
required for uplift forces). Therefore, the following requirements must be met:
a) The ends of the bottom chord are restrained from lateral movement to brace the girder from overturning.
For Joist Girders at columns in steel frames, restraint
shall be provided by a stabilizer plate on the column.
1004.2 SPAN
The span of a Joist Girder shall not exceed 24 times its depth.
1004.3 DEPTH
Joist Girders may have either parallel top chords or a top
chord slope of 1/8 inch per foot (1:96). The nominal depth of
sloping chord Joist Girders shall be the depth at mid-span.
(b) Steel
Ends of Joist Girders resting on steel supports shall be
attached thereto with a minimum of two 1/4 inch (6 millimeters) fillet welds 2 inches (51 millimeters) long, or
with two 3/4 inch (19 millimeters) bolts, or the equivalent.
In steel frames, bearing seats for Joist Girders shall be
fabricated to allow for field bolting.
(c) Uplift
Where uplift forces are a design consideration, roof Joist
Girders shall be anchored to resist such forces (Refer to
Section 1004.9).
1004.7 DEFLECTION
The deflections due to the design live load shall not exceed
the following:
Floors: 1/360 of span.
Roofs: 1/360 of span where a plaster ceiling is attached
or suspended.
86
JOIST GIRDERS
When a bolted seat connection is used for erection purposes, as a minimum, the bolts must be snug tightened.
The snug tight condition is defined as the tightness that
exists when all plies of a joint are in firm contact. This
may be attained by a few impacts of an impact wrench or
the full effort of an employee using an ordinary spud
wrench.
1004.8 PONDING*
The ponding investigation shall be performed by the specifying
professional.
* For further reference, refer to Steel Joist Institute
Technical Digest #3, Structural Design of Steel Joist
Roofs to Resist Ponding Loads and AISC
Specifications.
b) Where stabilizer plates are required the Joist Girder bottom chord must engage the stabilizer plate.
During the construction period, the contractor shall provide
means for the adequate distribution of loads so that the carrying capacity of any Joist Girder is not exceeded.
1004.9 UPLIFT
Where uplift forces due to wind are a design requirement,
these forces must be indicated on the contract drawings in
terms of NET uplift in pounds per square foot (Pascals). The
contract drawings must indicate if the net uplift is based on
ASD or LRFD. When these forces are specified, they must
be considered in the design of Joist Girders and/or bracing.
If the ends of the bottom chord are not strutted, bracing must
be provided near the first bottom chord panel points whenever uplift due to wind forces is a design consideration.*
1004.10 INSPECTION
(1)
SECTION 1006.
HOW TO SPECIFY
JOIST GIRDERS
For a given Joist Girder span, the specifying professional first
determines the number of joist spaces. Then the panel point
loads are calculated and a depth is selected. The following
tables give the Joist Girder weight in pounds per linear foot
(kiloNewtons per meter) for various depths and loads.
SECTION 1005.*
HANDLING AND
ERECTION
87
JOIST GIRDERS
17.4K
Joist
Space
17.4K
17.4K
17.4K
17.4K
17.4K
= 0.018 NPLd
Depth
STANDARD DESIGNATION
44G
8N
17.4F
Depth in
Inches
Number of
Joist Spaces
Deflection = 1.15
1.15(5)(1.500/12)(42x12)4
5wL4
=
384(29000)(4630)
384EI
11.9K
Joist
Space
11.9K
11.9K
11.9K
11.9K
11.9K
Depth
STANDARD DESIGNATION
44G
8N
Depth in
Inches
Number of
Joist Spaces
11.9K
Load in Kips at
Each Panel Point
In this example, N = 8
2. Compute total load:
88
JOIST GIRDERS
1.15(5)(1.500/12)(42x12)4
5wL4
=
384(29000)(4750)
384EI
5wL4
384EI
STANDARD DESIGNATION
1118G
8N
77.0F
Depth in
mm
Number of
Joist Spaces
Factored Load in kN
at Each Panel Point
1.15(5)(21.88)(12800)4
384(200000)(1937x106)
89
JOIST GIRDERS
STANDARD DESIGNATION
1118G
Depth in
mm
8N
52.5 kN
Number of
Joist Spaces
kN Load on Each
Panel Point
Deflection = 1.15
5wL4
384EI
1.15(5)(21.88)(12800)4
384(200000)(1981x106)
90
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
2N@
10.00
3N@
6.67
20
4N@
5.00
5N@
4.00
6N@
3.33
8N@
2.50
2N@
11.00
3N@
7.33
22
4N@
5.50
5N@
4.40
6N@
3.67
8N@
2.75
3N@
8.33
4N@
6.25
5N@
5.00
25
6N@
4.17
8N@
3.12
10N@
2.50
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
6.0
16
16
16
15
15
15
15
15
16
15
16
16
16
16
17
19
17
18
21
18
18
15
15
15
15
15
16
15
16
16
16
16
16
19
18
18
18
15
15
15
16
15
15
15
16
16
15
15
16
16
16
16
16
16
16
16
21
19
18
18
18
26
23
21
21
22
9.0
19
19
19
15
16
16
15
16
16
17
16
16
19
18
18
25
22
22
21
21
21
18
15
16
16
15
16
17
16
16
21
19
18
27
24
22
18
18
15
16
16
18
16
15
16
16
18
17
16
16
17
24
20
18
18
18
29
26
23
24
22
38
33
30
28
28
12.0
19
19
19
19
16
16
19
17
17
21
20
18
25
22
22
32
29
29
21
21
21
18
19
16
19
17
16
24
20
18
27
23
22
36
31
28
19
19
19
16
16
20
19
17
17
17
25
23
20
19
18
29
25
23
22
24
39
33
30
28
29
49
42
38
36
37
15.0
19
19
19
19
16
16
21
20
19
26
23
22
29
28
26
41
36
34
22
22
21
19
19
16
23
20
19
27
24
22
33
28
26
43
38
34
22
20
19
16
17
25
21
20
19
19
31
26
24
23
22
38
31
28
26
25
48
41
38
34
34
63
54
48
43
44
91
60.0
50
42
40
74
53
49
88
71
63
99
91
77
118
102
96
66.0
56
49
42
75
56
53
97
85
72
109
101
93
138
111
109
72.0
62
52
46
81
68
57
100
90
86
120
103
95
141
123
112
78.0
70
53
48
84
79
68
107
100
91
141
110
107
84.0
75
66
49
89
82
80
120
102
91
142
120
111
144
119
147
130
149
124
55
45
42
70
55
52
95
79
72
111
100
86
137
109
102
153
135
62
51
46
76
61
54
96
89
79
126
101
92
155
69
55
48
84
74
59
106
98
87
137
110
102
166
76
61
51
88
81
74
119
101
90
78
73
58
94
84
82
134
107
97
116
105
133
111
120
104
142
113
144
127
148
149
131
76
67
55
52
48
99
88
72
69
63
125
102
93
83
75
152
86
71
59
54
53
109
97
89
79
73
134
112
101
93
88
164
89
81
67
58
54
119
100
90
86
85
97
84
81
74
68
134
106
101
91
88
102
89
82
81
79
135
120
102
96
92
129
106
102
96
140
117
105
101
125
111
108
118
104
102
98
138
120
105
108
134
113
116
143
127
117
145
148
129
147
129
121
152
136
154
148
166
167
157
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
3N@
9.33
4N@
7.00
5N@
5.60
28
6N@
4.67
7N@
4.00
8N@
3.50
10N@
2.80
3N@
10.00
4N@
7.50
5N@
6.00
30
6N@
5.00
8N@
3.75
10N@
3.00
3N@
10.67
4N@
8.00
32
5N@
6.40
6N@
5.33
8N@
4.00
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
6.0
18
18
15
15
15
15
15
15
16
16
15
16
18
17
16
20
18
17
24
23
21
18
18
18
16
16
15
15
16
15
15
16
16
16
16
16
16
21
20
18
17
25
24
22
22
18
16
17
15
18
15
15
15
15
15
15
16
17
16
16
16
22
19
18
18
9.0
18
18
18
16
15
15
18
17
17
21
20
19
24
22
21
28
25
24
36
30
30
18
18
18
19
18
16
16
16
19
17
17
17
24
20
19
18
32
30
26
23
38
36
31
30
19
17
17
17
19
18
15
16
20
18
17
17
24
21
20
19
32
27
25
24
12.0
19
19
19
20
18
17
24
21
20
28
24
23
32
27
27
37
32
29
46
41
38
21
19
19
19
23
21
18
17
25
23
21
20
29
27
24
23
40
37
34
32
51
47
39
39
21
18
18
19
23
20
20
17
27
24
22
21
31
27
25
24
40
35
32
31
15.0
22
20
19
24
21
20
29
26
24
35
30
28
41
35
31
48
39
38
57
50
46
24
22
20
19
29
25
22
22
30
27
24
24
37
32
29
26
51
44
42
39
66
57
52
48
26
24
21
20
26
24
22
21
33
28
26
24
39
35
30
28
54
45
39
38
92
60.0
71
61
53
95
79
70
111
99
93
137
118
102
66.0
78
66
58
104
96
85
126
107
102
72.0
85
76
66
106
97
90
136
114
107
78.0
89
83
80
120
106
99
84.0
98
86
81
135
107
102
130
112
142
119
138
111
142
123
144
146
140
123
143
146
147
149
80
70
64
57
104
86
77
74
125
102
100
86
92
79
71
64
126
103
87
78
134
112
101
94
98
82
73
65
127
104
103
88
117
93
83
73
149
126
105
91
119
99
84
75
150
128
116
105
128
107
103
138
117
110
133
118
137
109
102
140
121
111
142
123
144
126
148
161
154
169
84
70
62
53
103
94
83
70
133
110
99
93
88
76
67
58
114
96
82
85
102
85
77
67
133
105
97
90
102
89
80
81
134
121
102
99
113
93
86
77
126
105
102
137
114
106
130
117
142
120
137
118
102
139
111
142
123
144
146
147
135
107
102
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
4N@
8.75
5N@
7.00
35
6N@
5.83
7N@
5.00
8N@
4.38
4N@
9.50
5N@
7.60
38
6N@
6.33
8N@
4.75
4N@
10.00
5N@
8.00
6N@
6.67
40
7N@
5.71
8N@
5.00
10N@
4.00
28
32
36
40
28
32
36
40
28
32
36
40
28
32
36
40
28
32
36
40
32
36
40
44
32
36
40
44
32
36
40
44
32
36
40
44
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
6.0
16
15
15
15
15
15
16
16
17
16
16
16
19
17
17
17
21
20
19
18
16
15
15
16
15
16
16
17
17
16
16
17
20
19
19
20
17
17
17
16
17
15
16
16
17
17
16
17
16
17
17
18
17
17
20
20
21
19
19
21
20
29
25
24
23
23
9.0
19
18
16
16
20
18
17
17
24
21
20
20
27
24
23
22
30
27
26
24
19
17
16
16
20
20
20
20
24
21
21
20
29
28
26
24
20
19
18
17
17
21
20
20
20
20
24
22
21
21
21
26
24
24
22
23
29
27
25
27
25
39
36
36
32
32
12.0
23
21
20
17
26
24
23
22
30
27
25
24
34
30
28
27
39
36
32
30
21
21
20
20
25
24
23
22
30
27
25
24
38
35
32
30
23
22
22
20
20
26
24
24
23
23
30
27
26
24
24
33
31
29
28
28
38
36
34
33
32
51
47
45
41
41
15.0
27
24
23
21
32
29
27
25
37
33
31
28
43
39
35
32
48
42
39
37
26
24
23
22
31
28
26
25
35
33
31
29
47
42
40
39
29
29
25
24
24
32
30
27
29
26
38
34
30
28
31
43
39
35
33
36
48
46
39
39
42
64
60
56
51
52
93
60.0
100
92
83
75
126
102
100
95
66.0
111
100
94
90
136
112
104
102
72.0
117
106
97
95
78.0
137
112
107
96
84.0
138
127
113
108
128
115
107
138
131
115
133
125
139
113
104
140
121
115
142
123
144
145
146
141
118
144
133
147
147
100
93
83
75
111
103
101
93
136
118
109
104
149
101
97
94
90
126
112
105
102
111
106
98
95
137
129
113
107
127
112
107
95
138
123
109
108
138
117
111
134
118
141
121
115
142
143
123
142
145
147
128
125
104
96
85
149
127
117
106
99
151
128
127
106
106
128
115
118
119
138
130
130
120
142
141
132
146
164
144
147
114
103
87
78
78
124
102
100
99
95
149
126
104
96
84
78
134
112
105
116
100
137
114
107
109
141
130
116
132
142
134
133
142
135
140
122
134
143
136
164
167
147
155
170
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
4N@
10.50
5N@
8.40
6N@
7.00
42
7N@
6.00
8N@
5.25
10N@
4.20
4N@
11.25
5N@
9.00
6N@
7.50
45
7N@
6.43
8N@
5.62
9N@
5.00
10N@
4.50
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
6.0
16
16
16
16
16
16
15
16
16
17
18
17
17
16
20
20
19
18
20
18
22
20
20
20
21
27
25
24
23
23
18
19
19
18
18
16
16
16
20
20
19
19
19
20
20
20
20
20
20
18
21
20
20
21
22
24
22
23
23
23
26
25
24
24
23
9.0
21
19
19
19
19
22
21
21
20
20
25
23
21
21
20
28
26
24
23
23
32
27
26
25
26
38
36
34
31
30
21
21
21
21
22
22
21
21
21
21
24
23
21
21
21
27
26
24
23
23
30
28
27
26
28
34
31
31
29
28
38
35
33
31
31
12.0
25
22
21
20
21
28
25
24
24
23
32
30
26
24
25
36
34
31
29
28
40
38
35
32
32
52
46
45
41
39
25
22
22
22
23
27
25
24
24
24
31
28
27
26
25
35
33
30
29
28
38
36
34
32
33
45
39
39
37
36
49
47
46
40
39
15.0
29
26
24
23
24
35
31
28
27
27
39
35
33
31
29
45
40
38
35
34
51
46
42
39
41
62
60
54
52
49
28
27
24
24
24
33
30
29
27
27
38
34
32
30
29
44
40
39
36
34
48
46
41
39
42
55
49
48
47
46
60
60
54
49
50
94
60.0
101
95
93
84
75
125
111
103
101
95
66.0
112
101
97
94
90
72.0
125
112
97
97
95
78.0
134
118
113
108
97
84.0
138
129
122
109
108
126
113
105
102
137
129
113
107
130
126
115
134
118
137
119
109
104
141
121
115
142
143
124
142
145
147
142
132
118
145
136
149
117
112
102
95
95
128
113
108
107
96
138
128
114
109
109
128
123
112
107
130
118
117
142
134
119
143
136
148
147
148
100
95
89
83
76
125
111
103
95
94
112
101
95
94
91
136
122
110
106
98
137
118
110
102
140
139
122
116
142
143
124
143
133
118
145
136
149
146
148
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
5N@
9.60
6N@
8.00
48
8N@
6.00
9N@
5.33
12N@
4.00
5N@
10.00
6N@
8.33
8N@
6.25
50
9N@
5.56
10N@
5.00
12N@
4.17
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
6.0
19
19
19
19
20
20
20
19
19
19
20
20
30
28
27
26
26
25
35
34
33
33
31
31
35
34
31
30
30
27
18
17
19
20
20
20
20
19
19
20
20
21
22
21
21
21
24
24
24
23
24
24
24
24
26
25
24
24
23
24
34
31
30
30
27
27
9.0
26
23
22
21
21
21
28
25
24
23
23
22
36
33
32
30
30
28
44
42
39
37
36
35
52
48
44
41
39
38
23
22
22
22
22
20
28
24
23
23
23
23
31
29
27
25
29
27
34
32
32
31
30
32
38
36
34
34
32
31
49
44
41
39
40
39
12.0
31
29
27
25
25
24
35
33
31
30
27
27
45
42
39
37
36
36
55
52
50
46
46
44
71
65
57
53
52
49
30
29
28
25
25
24
34
31
30
30
26
27
39
37
35
33
36
35
44
40
42
40
38
38
49
47
46
45
41
40
65
57
58
53
52
49
15.0
37
35
32
30
29
29
42
39
36
35
32
31
56
51
49
47
44
43
70
63
59
56
54
53
84
76
73
67
61
61
38
34
31
31
30
30
42
38
37
36
33
33
51
47
42
40
42
40
55
53
52
47
46
49
60
60
54
52
48
49
80
73
67
68
61
61
95
60.0
136
136
116
115
99
100
66.0
72.0
78.0
84.0
138
126
116
117
100
139
128
118
119
150
140
130
120
142
141
133
151
141
131
132
160
144
134
162
153
165
136
126
115
116
99
96
138
137
127
117
117
101
139
139
129
119
120
141
141
131
121
142
142
133
149
129
129
120
110
151
131
132
123
153
144
134
162
163
154
164
165
148
139
149
148
138
129
130
120
164
155
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
5N@
11.00
6N@
9.17
55
7N@
7.86
9N@
6.11
11N@
5.00
5N@
12.00
6N@
10.00
8N@
7.50
60
10N@
6.00
12N@
5.00
15N@
4.00
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
6.0
21
21
20
20
23
24
19
20
20
18
20
19
21
21
21
20
21
22
24
24
25
24
24
24
30
28
27
27
26
26
21
21
22
22
24
25
20
20
19
19
19
22
24
23
23
23
28
29
26
28
27
25
27
26
33
31
29
30
32
29
40
39
38
38
35
35
7.5
21
21
22
21
24
24
22
22
22
21
21
20
24
24
23
22
22
22
29
28
30
29
27
27
36
33
34
33
31
31
23
22
23
23
24
25
24
23
24
23
23
22
29
29
26
26
30
30
32
34
33
31
32
32
39
37
36
35
35
33
49
48
46
42
41
44
9.0
24
23
23
24
24
24
26
24
24
24
24
22
28
27
26
25
24
24
34
32
33
32
32
31
43
39
37
39
37
36
27
27
24
24
24
25
29
28
25
24
24
24
34
31
31
32
33
31
37
38
37
37
37
33
46
45
41
39
41
38
64
57
53
51
49
46
10.5
25
24
25
24
24
25
29
28
26
25
25
24
33
31
29
28
27
26
39
38
39
38
36
35
49
45
44
42
40
39
29
28
28
28
26
25
32
30
30
29
27
27
39
37
36
33
34
34
44
44
43
39
42
38
53
51
48
47
48
42
72
66
67
60
55
55
96
30.0
63
60
57
53
52
48
75
68
86
63
60
56
87
76
74
70
68
65
105
103
104
92
93
83
137
128
115
107
108
98
69
65
63
60
56
56
80
78
69
70
65
63
112
103
96
85
82
80
118
113
105
104
102
96
33.0
71
64
65
58
60
55
86
75
93
70
64
62
97
89
86
79
72
70
116
107
105
105
95
91
36.0
82
71
66
66
61
56
86
87
99
71
71
65
102
98
91
87
81
74
135
118
114
107
108
97
139
131
118
110
113
76
69
69
66
61
56
93
80
79
75
69
68
123
114
104
98
90
90
137
130
123
111
120
98
142
134
121
117
87
77
74
70
67
63
93
94
83
83
77
71
125
125
116
106
100
92
138
138
131
126
122
111
139
129
116
122
110
140
133
134
114
145
147
127
153
142
167
160
171
39.0
83
73
74
66
67
62
98
89
109
78
75
73
111
103
100
92
93
83
137
129
125
117
109
111
42.0
86
83
74
74
68
69
101
98
110
91
80
73
120
110
105
101
94
84
139
133
128
118
113
146
137
126
89
85
78
75
72
69
112
94
95
83
84
75
136
127
127
118
108
104
148
141
94
90
87
80
73
70
113
113
96
96
85
87
148
139
129
129
120
110
143
134
134
111
145
121
164
142
151
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
6N@
10.83
8N@
8.12
9N@
7.22
65
10N@
6.50
11N@
5.91
13N@
5.00
7N@
10.00
9N@
7.78
10N@
7.00
70
11N@
6.36
12N@
5.83
14N@
5.00
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
6.0
22
21
23
22
24
25
24
23
24
38
30
26
25
28
29
31
31
29
27
27
33
32
33
30
30
37
37
35
34
34
24
23
24
24
25
24
26
25
31
32
32
33
27
30
29
30
30
31
32
30
31
32
29
30
34
33
32
32
30
30
36
37
35
34
33
33
7.5
28
25
24
24
25
31
30
28
28
39
32
32
32
32
30
36
36
34
34
33
39
39
38
37
36
45
43
41
41
41
25
26
27
25
26
27
31
30
34
33
34
34
34
36
35
34
33
33
41
39
38
37
35
36
41
39
37
37
36
36
44
43
42
40
39
40
9.0
30
29
29
26
27
38
34
33
33
39
38
39
38
37
35
41
40
40
39
37
45
44
44
42
41
55
53
50
49
46
30
30
30
29
28
29
37
35
38
37
36
35
38
41
42
38
37
36
45
44
43
42
40
39
50
46
45
42
42
40
53
54
48
49
44
44
10.5
33
33
32
31
31
40
39
39
35
39
44
42
40
41
38
49
46
44
43
44
52
51
49
46
47
64
61
58
53
53
35
33
32
32
31
31
40
39
43
43
39
38
45
48
44
43
40
40
51
50
46
48
47
45
56
55
48
48
48
45
63
61
55
55
52
51
97
30.0
83
80
76
73
68
115
105
99
89
89
128
118
109
103
91
131
132
122
113
110
153
144
134
125
118
39.0
115
97
98
87
87
141
131
130
122
113
153
144
145
136
127
42.0
116
117
99
100
89
153
143
133
124
125
146
138
129
140
141
163
143
147
144
164
156
173
110
105
104
94
90
85
121
111
106
102
96
94
131
127
124
116
113
131
118
118
132
127
115
112
133
130
121
137
133
132
119
118
116
136
124
124
148
140
129
141
144
139
130
119
113
115
143
135
123
118
148
141
128
151
144
151
138
138
127
141
143
155
158
137
138
88
85
75
76
71
69
110
105
106
100
93
94
118
122
109
106
96
98
138
129
117
109
110
102
33.0
95
84
82
78
76
127
118
108
101
92
129
130
120
112
108
154
144
134
125
127
156
147
139
131
161
141
102
90
87
78
78
72
122
114
112
108
102
95
137
130
123
112
108
109
36.0
97
97
92
83
80
129
129
119
110
104
142
142
132
124
115
155
170
102
102
93
89
83
80
128
129
122
114
110
103
155
146
138
140
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
8N@
9.38
10N@
7.50
75
12N@
6.25
14N@
5.36
15N@
5.00
8N@
10.00
10N@
8.00
80
12N@
6.67
14N@
5.71
16N@
5.00
56
60
66
72
78
60
66
72
78
84
60
66
72
78
84
66
72
78
84
90
66
72
78
84
90
60
66
72
78
84
90
60
66
72
78
84
90
66
72
78
84
90
96
66
72
78
84
90
96
66
72
78
84
90
96
6.0
29
26
27
26
27
32
32
30
31
31
38
35
36
35
34
41
41
37
38
37
41
42
41
39
38
28
30
29
30
30
53
31
31
33
32
33
34
36
34
33
34
36
34
39
38
36
36
36
37
42
41
41
39
39
40
7.5
33
32
32
32
29
39
37
36
35
36
43
42
41
42
39
48
46
44
44
42
52
52
47
46
46
31
31
32
31
32
54
35
35
37
36
37
36
44
42
39
38
39
37
47
46
43
42
41
40
53
50
49
45
46
46
9.0
40
38
35
34
34
42
42
42
39
39
51
50
46
47
46
56
52
53
52
50
60
59
54
55
52
37
35
33
33
35
56
41
39
43
42
42
40
50
47
46
47
44
43
57
54
50
50
48
47
62
57
58
54
54
55
10.5
43
42
41
41
37
50
49
45
46
45
59
55
54
54
52
63
61
61
57
58
69
67
65
63
60
42
38
38
37
37
56
47
46
50
46
45
44
57
54
53
49
50
50
64
59
58
56
53
53
70
69
66
61
62
58
98
30.0
116
116
99
100
89
131
132
123
114
110
33.0
128
118
118
101
103
154
134
136
127
128
36.0
140
130
120
121
105
39.0
152
142
132
122
123
138
139
131
152
143
148
141
139
139
154
152
141
163
164
171
151
153
144
171
173
176
169
171
146
103
103
92
88
83
90
129
115
120
112
109
102
174
177
112
105
106
94
96
95
139
132
127
122
115
111
133
129
121
116
117
127
113
108
109
98
103
42.0
153
144
134
125
156
137
129
116
111
112
105
131
126
118
114
118
130
125
118
131
132
136
136
138
125
120
140
143
130
149
147
156
149
143
136
127
146
145
152
155
155
164
142
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
9N@
10.00
10N@
9.00
11N@
8.18
90
12N@
7.50
15N@
6.00
18N@
5.00
10N@
10.00
12N@
8.33
15N@
6.67
100
16N@
6.25
17N@
5.88
18N@
5.56
20N@
5.00
72
84
90
96
102
72
84
90
96
102
72
84
90
96
102
78
84
90
96
108
78
84
90
96
108
78
84
90
96
108
78
84
96
102
108
78
84
96
102
108
78
84
96
102
108
84
96
102
108
120
84
96
102
108
120
84
96
102
108
120
84
96
102
108
120
6.0
40
41
54
55
55
42
42
42
43
43
43
43
45
47
48
44
45
46
46
45
47
49
50
48
51
51
51
52
53
57
45
47
55
55
56
48
48
47
48
48
53
53
52
53
53
53
53
53
54
56
55
54
55
55
56
55
55
56
57
59
58
60
59
60
68
7.5
42
44
55
56
57
46
45
46
46
45
47
49
48
48
49
49
49
50
48
49
54
54
52
53
57
62
61
58
58
59
49
50
56
56
57
53
52
51
52
51
56
56
56
56
56
58
57
57
58
61
61
59
59
60
62
61
60
61
60
64
66
65
65
67
73
9.0
46
48
56
57
57
48
49
50
48
48
51
50
51
53
57
53
52
52
52
55
66
62
60
58
59
74
73
70
68
64
52
53
56
57
58
56
55
55
55
55
67
61
61
60
59
69
63
62
62
64
70
65
66
65
67
70
65
66
68
69
77
73
71
71
90
10.5
49
48
56
57
58
52
51
51
53
53
59
55
53
56
58
60
56
60
58
56
75
68
69
66
64
84
80
79
78
76
55
55
57
58
59
62
63
58
58
59
75
69
68
66
65
72
71
66
67
70
77
72
73
69
71
81
72
73
73
75
94
83
80
80
101
99
30.0
119
121
105
107
105
142
137
126
113
115
33.0
141
124
125
110
112
155
148
129
129
124
138
129
132
124
36.0
143
135
128
128
130
39.0
42.0
148
138
131
133
149
141
133
131
153
137
150
142
134
138
148
150
163
149
151
132
135
152
153
137
156
160
168
173
168
172
131
118
125
121
107
140
133
126
127
127
131
133
123
141
139
149
161
168
143
133
130
149
142
134
155
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
10N@
11.00
12N@
9.17
14N@
7.86
110
16N@
6.88
18N@
6.11
20N@
5.50
10N@
12.00
12N@
10.00
15N@
8.00
120
16N@
7.50
18N@
6.67
20N@
6.00
24N@
5.00
84
96
108
114
120
84
96
108
114
120
84
96
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
6.0
54
62
63
63
64
58
57
58
59
59
60
60
60
61
60
62
63
64
65
66
64
66
66
67
68
68
69
69
69
66
63
64
78
78
79
68
68
69
70
70
69
70
70
70
72
70
70
70
70
70
71
72
72
72
73
76
75
75
77
77
83
81
83
86
86
7.5
58
62
63
64
64
62
62
64
65
62
66
65
64
65
66
68
67
68
70
69
71
70
71
73
74
77
75
77
77
72
66
67
79
79
81
69
69
70
70
71
74
73
73
73
74
76
74
74
73
75
77
78
79
76
77
82
83
81
82
84
90
88
91
96
97
9.0
61
63
64
67
66
66
66
68
66
67
71
69
69
69
69
72
74
73
74
75
77
80
77
79
79
82
81
83
86
77
69
69
82
82
83
71
72
72
71
72
77
78
80
78
78
80
78
80
81
79
85
83
84
85
84
89
87
88
87
90
96
99
96
109
107
10.5
65
65
67
68
69
70
70
72
71
72
76
74
72
74
74
79
80
81
80
81
87
89
83
85
88
99
94
94
91
83
72
71
83
83
84
77
78
75
75
76
82
84
85
83
84
85
86
85
86
85
89
87
88
90
89
94
92
94
93
96
111
108
103
121
117
100
30.0
144
33.0
36.0
131
133
128
133
136
137
140
158
156
158
158
161
160
129
131
128
133
138
137
39.0
42.0
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
2N@
10.00
3N@
6.67
20
4N@
5.00
5N@
4.00
6N@
3.33
8N@
2.50
2N@
11.00
3N@
7.33
22
4N@
5.50
5N@
4.40
6N@
3.67
8N@
2.75
3N@
8.33
4N@
6.25
5N@
5.00
25
6N@
4.17
8N@
3.12
10N@
2.50
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
20
24
28
32
36
4
16
16
16
15
15
15
15
15
16
15
16
16
16
16
17
19
17
18
21
18
18
15
15
15
15
15
16
15
16
16
16
16
16
19
18
18
18
15
15
15
16
15
15
15
16
16
15
15
16
16
16
16
16
16
16
16
21
19
18
18
18
26
23
21
21
22
6
19
19
19
15
16
16
15
16
16
17
16
16
19
18
18
25
22
22
21
21
21
18
15
16
16
15
16
17
16
16
21
19
18
27
24
22
18
18
15
16
16
18
16
15
16
16
18
17
16
16
17
24
20
18
18
18
29
26
23
24
22
38
33
30
28
28
8
19
19
19
19
16
16
19
17
17
21
20
18
25
22
22
32
29
29
21
21
21
18
19
16
19
17
16
24
20
18
27
23
22
36
31
28
19
19
19
16
16
20
19
17
17
17
25
23
20
19
18
29
25
23
22
24
39
33
30
28
29
49
42
38
36
37
10
19
19
19
19
16
16
21
20
19
26
23
22
29
28
26
41
36
34
22
22
21
19
19
16
23
20
19
27
24
22
33
28
26
43
38
34
22
20
19
16
17
25
21
20
19
19
31
26
24
23
22
38
31
28
26
25
48
41
38
34
34
63
54
48
43
44
12
19
19
19
20
19
17
25
23
22
31
26
27
36
31
30
51
42
40
22
22
22
22
20
19
26
25
22
34
28
26
39
32
30
56
46
40
26
22
20
20
17
29
26
24
21
21
38
32
28
26
26
45
37
32
30
30
58
50
44
39
40
78
65
56
52
52
101
40
50
42
40
74
53
49
88
71
63
99
91
77
118
102
96
44
56
49
42
75
56
53
97
85
72
109
101
93
138
111
109
48
62
52
46
81
68
57
100
90
86
120
103
95
141
123
112
52
70
53
48
84
79
68
107
100
91
141
110
107
56
75
66
49
89
82
80
120
102
91
142
120
111
144
119
147
130
149
124
55
45
42
70
55
52
95
79
72
111
100
86
137
109
102
153
135
62
51
46
76
61
54
96
89
79
126
101
92
155
69
55
48
84
74
59
106
98
87
137
110
102
166
76
61
51
88
81
74
119
101
90
78
73
58
94
84
82
134
107
97
116
105
133
111
120
104
142
113
144
127
148
149
131
76
67
55
52
48
99
88
72
69
63
125
102
93
83
75
152
86
71
59
54
53
109
97
89
79
73
134
112
101
93
88
164
89
81
67
58
54
119
100
90
86
85
97
84
81
74
68
134
106
101
91
88
102
89
82
81
79
135
120
102
96
92
129
106
102
96
140
117
105
101
125
111
108
118
104
102
98
138
120
105
108
134
113
116
143
127
117
145
148
129
147
129
121
152
136
154
148
166
167
157
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
3N@
9.33
4N@
7.00
5N@
5.60
28
6N@
4.67
7N@
4.00
8N@
3.50
10N@
2.80
3N@
10.00
4N@
7.50
5N@
6.00
30
6N@
5.00
8N@
3.75
10N@
3.00
3N@
10.67
4N@
8.00
32
5N@
6.40
6N@
5.33
8N@
4.00
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
24
28
32
36
4
18
18
15
15
15
15
15
15
16
16
15
16
18
17
16
20
18
17
24
23
21
18
18
18
16
16
15
15
16
15
15
16
16
16
16
16
16
21
20
18
17
25
24
22
22
18
16
17
15
18
15
15
15
15
15
15
16
17
16
16
16
22
19
18
18
6
18
18
18
16
15
15
18
17
17
21
20
19
24
22
21
28
25
24
36
30
30
18
18
18
19
18
16
16
16
19
17
17
17
24
20
19
18
32
30
26
23
38
36
31
30
19
17
17
17
19
18
15
16
20
18
17
17
24
21
20
19
32
27
25
24
8
19
19
19
20
18
17
24
21
20
28
24
23
32
27
27
37
32
29
46
41
38
21
19
19
19
23
21
18
17
25
23
21
20
29
27
24
23
40
37
34
32
51
47
39
39
21
18
18
19
23
20
20
17
27
24
22
21
31
27
25
24
40
35
32
31
10
22
20
19
24
21
20
29
26
24
35
30
28
41
35
31
48
39
38
57
50
46
24
22
20
19
29
25
22
22
30
27
24
24
37
32
29
26
51
44
42
39
66
57
52
48
26
24
21
20
26
24
22
21
33
28
26
24
39
35
30
28
54
45
39
38
12
24
22
21
27
25
23
34
30
27
41
36
32
49
43
38
55
50
43
70
60
55
27
25
22
21
33
30
26
24
37
32
29
27
45
38
34
31
63
53
49
46
78
69
58
54
27
26
25
23
32
28
25
24
39
34
32
27
47
40
36
34
61
55
50
43
102
40
71
61
53
95
79
70
111
99
93
137
118
102
44
78
66
58
104
96
85
126
107
102
48
85
76
66
106
97
90
136
114
107
52
89
83
80
120
106
99
56
98
86
81
135
107
102
130
112
142
119
138
111
142
123
144
146
140
123
143
146
147
149
80
70
64
57
104
86
77
74
125
102
100
86
92
79
71
64
126
103
87
78
134
112
101
94
98
82
73
65
127
104
103
88
117
93
83
73
149
126
105
91
119
99
84
75
150
128
116
105
128
107
103
138
117
110
133
118
137
109
102
140
121
111
142
123
144
126
148
161
154
169
84
70
62
53
103
94
83
70
133
110
99
93
88
76
67
58
114
96
82
85
102
85
77
67
133
105
97
90
102
89
80
81
134
121
102
99
113
93
86
77
126
105
102
137
114
106
130
117
142
120
137
118
102
139
111
142
123
144
146
147
135
107
102
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
4N@
8.75
5N@
7.00
35
6N@
5.83
7N@
5.00
8N@
4.38
4N@
9.50
5N@
7.60
38
6N@
6.33
8N@
4.75
4N@
10.00
5N@
8.00
6N@
6.67
40
7N@
5.71
8N@
5.00
10N@
4.00
28
32
36
40
28
32
36
40
28
32
36
40
28
32
36
40
28
32
36
40
32
36
40
44
32
36
40
44
32
36
40
44
32
36
40
44
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
4
16
15
15
15
15
15
16
16
17
16
16
16
19
17
17
17
21
20
19
18
16
15
15
16
15
16
16
17
17
16
16
17
20
19
19
20
17
17
17
16
17
15
16
16
17
17
16
17
16
17
17
18
17
17
20
20
21
19
19
21
20
29
25
24
23
23
6
19
18
16
16
20
18
17
17
24
21
20
20
27
24
23
22
30
27
26
24
19
17
16
16
20
20
20
20
24
21
21
20
29
28
26
24
20
19
18
17
17
21
20
20
20
20
24
22
21
21
21
26
24
24
22
23
29
27
25
27
25
39
36
36
32
32
8
23
21
20
17
26
24
23
22
30
27
25
24
34
30
28
27
39
36
32
30
21
21
20
20
25
24
23
22
30
27
25
24
38
35
32
30
23
22
22
20
20
26
24
24
23
23
30
27
26
24
24
33
31
29
28
28
38
36
34
33
32
51
47
45
41
41
10
27
24
23
21
32
29
27
25
37
33
31
28
43
39
35
32
48
42
39
37
26
24
23
22
31
28
26
25
35
33
31
29
47
42
40
39
29
29
25
24
24
32
30
27
29
26
38
34
30
28
31
43
39
35
33
36
48
46
39
39
42
64
60
56
51
52
12
31
28
27
26
37
34
29
27
44
38
36
34
52
47
42
39
59
53
48
44
31
28
27
26
36
33
31
30
41
39
36
33
56
50
48
47
37
31
29
29
25
38
34
32
32
31
44
39
36
36
36
52
47
43
39
41
58
53
49
47
47
79
69
66
60
58
103
40
100
92
83
75
126
102
100
95
44
111
100
94
90
136
112
104
102
48
117
106
97
95
52
137
112
107
96
56
138
127
113
108
128
115
107
138
131
115
133
125
139
113
104
140
121
115
142
123
144
145
146
141
118
144
133
147
147
100
93
83
75
111
103
101
93
136
118
109
104
149
101
97
94
90
126
112
105
102
111
106
98
95
137
129
113
107
127
112
107
95
138
123
109
108
138
117
111
134
118
141
121
115
142
143
123
142
145
147
128
125
104
96
85
149
127
117
106
99
151
128
127
106
106
128
115
118
119
138
130
130
120
142
141
132
146
164
144
147
114
103
87
78
78
124
102
100
99
95
149
126
104
96
84
78
134
112
105
116
100
137
114
107
109
141
130
116
132
142
134
133
142
135
140
122
134
143
136
164
167
147
155
170
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
4N@
10.50
5N@
8.40
6N@
7.00
42
7N@
6.00
8N@
5.25
10N@
4.20
4N@
11.25
5N@
9.00
6N@
7.50
45
7N@
6.43
8N@
5.62
9N@
5.00
10N@
4.50
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
32
36
40
44
48
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
36
40
44
48
52
4
16
16
16
16
16
16
15
16
16
17
18
17
17
16
20
20
19
18
20
18
22
20
20
20
21
27
25
24
23
23
18
19
19
18
18
16
16
16
20
20
19
19
19
20
20
20
20
20
20
18
21
20
20
21
22
24
22
23
23
23
26
25
24
24
23
6
21
19
19
19
19
22
21
21
20
20
25
23
21
21
20
28
26
24
23
23
32
27
26
25
26
38
36
34
31
30
21
21
21
21
22
22
21
21
21
21
24
23
21
21
21
27
26
24
23
23
30
28
27
26
28
34
31
31
29
28
38
35
33
31
31
8
25
22
21
20
21
28
25
24
24
23
32
30
26
24
25
36
34
31
29
28
40
38
35
32
32
52
46
45
41
39
25
22
22
22
23
27
25
24
24
24
31
28
27
26
25
35
33
30
29
28
38
36
34
32
33
45
39
39
37
36
49
47
46
40
39
10
29
26
24
23
24
35
31
28
27
27
39
35
33
31
29
45
40
38
35
34
51
46
42
39
41
62
60
54
52
49
28
27
24
24
24
33
30
29
27
27
38
34
32
30
29
44
40
39
36
34
48
46
41
39
42
55
49
48
47
46
60
60
54
49
50
12
34
32
28
27
26
41
36
33
31
30
45
41
39
35
33
52
49
46
41
39
62
56
51
49
48
77
70
64
61
56
33
31
29
28
27
38
36
34
32
30
45
40
38
36
34
52
47
46
41
39
58
53
51
47
48
66
61
58
55
55
73
66
64
62
56
104
40
101
95
93
84
75
125
111
103
101
95
44
112
101
97
94
90
48
125
112
97
97
95
52
134
118
113
108
97
56
138
129
122
109
108
126
113
105
102
137
129
113
107
130
126
115
134
118
137
119
109
104
141
121
115
142
143
124
142
145
147
142
132
118
145
136
149
117
112
102
95
95
128
113
108
107
96
138
128
114
109
109
128
123
112
107
130
118
117
142
134
119
143
136
148
147
148
100
95
89
83
76
125
111
103
95
94
112
101
95
94
91
136
122
110
106
98
137
118
110
102
140
139
122
116
142
143
124
143
133
118
145
136
149
146
148
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
5N@
9.60
6N@
8.00
48
8N@
6.00
9N@
5.33
12N@
4.00
5N@
10.00
6N@
8.33
8N@
6.25
50
9N@
5.56
10N@
5.00
12N@
4.17
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
36
40
44
48
52
56
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
40
44
48
52
56
60
4
19
19
19
19
20
20
20
19
19
19
20
20
30
28
27
26
26
25
35
34
33
33
31
31
35
34
31
30
30
27
18
17
19
20
20
20
20
19
19
20
20
21
22
21
21
21
24
24
24
23
24
24
24
24
26
25
24
24
23
24
34
31
30
30
27
27
6
26
23
22
21
21
21
28
25
24
23
23
22
36
33
32
30
30
28
44
42
39
37
36
35
52
48
44
41
39
38
23
22
22
22
22
20
28
24
23
23
23
23
31
29
27
25
29
27
34
32
32
31
30
32
38
36
34
34
32
31
49
44
41
39
40
39
8
31
29
27
25
25
24
35
33
31
30
27
27
45
42
39
37
36
36
55
52
50
46
46
44
71
65
57
53
52
49
30
29
28
25
25
24
34
31
30
30
26
27
39
37
35
33
36
35
44
40
42
40
38
38
49
47
46
45
41
40
65
57
58
53
52
49
10
37
35
32
30
29
29
42
39
36
35
32
31
56
51
49
47
44
43
70
63
59
56
54
53
84
76
73
67
61
61
38
34
31
31
30
30
42
38
37
36
33
33
51
47
42
40
42
40
55
53
52
47
46
49
60
60
54
52
48
49
80
73
67
68
61
61
12
45
41
37
36
33
33
51
47
45
40
38
37
64
59
55
53
51
49
79
74
69
66
63
62
100
93
82
76
76
70
44
40
38
35
32
33
48
47
40
40
39
38
59
53
51
49
47
47
66
61
58
58
55
53
74
68
65
62
60
57
100
86
82
76
70
70
105
40
136
136
116
115
99
100
44
48
52
56
138
126
116
117
100
139
128
118
119
150
140
130
120
142
141
133
148
138
129
130
120
151
141
131
132
160
144
134
162
153
165
136
126
115
116
99
96
138
137
127
117
117
101
139
139
129
119
120
141
141
131
121
142
142
133
149
129
129
120
110
151
131
132
123
153
144
134
162
163
154
164
165
148
139
149
164
155
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
5N@
11.00
6N@
9.17
55
7N@
7.86
9N@
6.11
11N@
5.00
5N@
12.00
6N@
10.00
8N@
7.50
60
10N@
6.00
12N@
5.00
15N@
4.00
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
44
48
52
56
60
66
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
48
52
56
60
66
72
4
21
21
20
20
23
24
19
20
20
18
20
19
21
21
21
20
21
22
24
24
25
24
24
24
30
28
27
27
26
26
21
21
22
22
24
25
20
20
19
19
19
22
24
23
23
23
28
29
26
28
27
25
27
26
33
31
29
30
32
29
40
39
38
38
35
35
5
21
21
22
21
24
24
22
22
22
21
21
20
24
24
23
22
22
22
29
28
30
29
27
27
36
33
34
33
31
31
23
22
23
23
24
25
24
23
24
23
23
22
29
29
26
26
30
30
32
34
33
31
32
32
39
37
36
35
35
33
49
48
46
42
41
44
6
24
23
23
24
24
24
26
24
24
24
24
22
28
27
26
25
24
24
34
32
33
32
32
31
43
39
37
39
37
36
27
27
24
24
24
25
29
28
25
24
24
24
34
31
31
32
33
31
37
38
37
37
37
33
46
45
41
39
41
38
64
57
53
51
49
46
7
25
24
25
24
24
25
29
28
26
25
25
24
33
31
29
28
27
26
39
38
39
38
36
35
49
45
44
42
40
39
29
28
28
28
26
25
32
30
30
29
27
27
39
37
36
33
34
34
44
44
43
39
42
38
53
51
48
47
48
42
72
66
67
60
55
55
8
29
28
27
26
27
26
33
31
29
28
29
28
36
34
33
31
30
30
46
40
43
43
40
39
55
54
52
48
47
45
33
31
30
29
30
27
36
33
33
32
32
28
43
40
38
39
41
36
49
50
46
45
49
42
59
57
55
54
53
50
80
74
71
68
62
64
106
20
63
60
57
53
52
48
75
68
86
63
60
56
87
76
74
70
68
65
105
103
104
92
93
83
137
128
115
107
108
98
69
65
63
60
56
56
80
78
69
70
65
63
112
103
96
85
82
80
118
113
105
104
102
96
22
71
64
65
58
60
55
86
75
93
70
64
62
97
89
86
79
72
70
116
107
105
105
95
91
24
82
71
66
66
61
56
86
87
99
71
71
65
102
98
91
87
81
74
135
118
114
107
108
97
139
131
118
110
113
76
69
69
66
61
56
93
80
79
75
69
68
123
114
104
98
90
90
137
130
123
111
120
98
142
134
121
117
87
77
74
70
67
63
93
94
83
83
77
71
125
125
116
106
100
92
138
138
131
126
122
111
139
129
116
122
110
140
133
134
114
145
147
127
153
142
167
160
171
26
83
73
74
66
67
62
98
89
109
78
75
73
111
103
100
92
93
83
137
129
125
117
109
111
28
86
83
74
74
68
69
101
98
110
91
80
73
120
110
105
101
94
84
139
133
128
118
113
146
137
126
89
85
78
75
72
69
112
94
95
83
84
75
136
127
127
118
108
104
148
141
94
90
87
80
73
70
113
113
96
96
85
87
148
139
129
129
120
110
143
134
134
111
145
121
164
142
151
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
6N@
10.83
8N@
8.12
9N@
7.22
65
10N@
6.50
11N@
5.91
13N@
5.00
7N@
10.00
9N@
7.78
10N@
7.00
70
11N@
6.36
12N@
5.83
14N@
5.00
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
52
56
60
66
72
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
56
60
66
72
78
84
4
22
21
23
22
24
25
24
23
24
38
30
26
25
28
29
31
31
29
27
27
33
32
33
30
30
37
37
35
34
34
24
23
24
24
25
24
26
25
31
32
32
33
27
30
29
30
30
31
32
30
31
32
29
30
34
33
32
32
30
30
36
37
35
34
33
33
5
28
25
24
24
25
31
30
28
28
39
32
32
32
32
30
36
36
34
34
33
39
39
38
37
36
45
43
41
41
41
25
26
27
25
26
27
31
30
34
33
34
34
34
36
35
34
33
33
41
39
38
37
35
36
41
39
37
37
36
36
44
43
42
40
39
40
6
30
29
29
26
27
38
34
33
33
39
38
39
38
37
35
41
40
40
39
37
45
44
44
42
41
55
53
50
49
46
30
30
30
29
28
29
37
35
38
37
36
35
38
41
42
38
37
36
45
44
43
42
40
39
50
46
45
42
42
40
53
54
48
49
44
44
7
33
33
32
31
31
40
39
39
35
39
44
42
40
41
38
49
46
44
43
44
52
51
49
46
47
64
61
58
53
53
35
33
32
32
31
31
40
39
43
43
39
38
45
48
44
43
40
40
51
50
46
48
47
45
56
55
48
48
48
45
63
61
55
55
52
51
8
39
35
34
33
32
44
43
41
42
42
49
48
47
44
44
58
52
51
50
47
59
60
55
54
51
72
69
64
62
58
39
37
35
34
34
35
45
45
48
45
45
45
53
55
51
47
46
47
60
57
53
55
50
49
63
58
55
55
51
51
71
69
64
61
58
58
107
20
83
80
76
73
68
115
105
99
89
89
128
118
109
103
91
131
132
122
113
110
153
144
134
125
118
26
115
97
98
87
87
141
131
130
122
113
153
144
145
136
127
28
116
117
99
100
89
153
143
133
124
125
146
138
129
140
141
163
143
147
144
164
156
173
110
105
104
94
90
85
121
111
106
102
96
94
131
127
124
116
113
131
118
118
132
127
115
112
133
130
121
137
133
132
119
118
116
136
124
124
148
140
129
141
144
139
130
119
113
115
143
135
123
118
148
141
128
151
144
151
138
138
127
141
143
155
158
137
138
88
85
75
76
71
69
110
105
106
100
93
94
118
122
109
106
96
98
138
129
117
109
110
102
22
95
84
82
78
76
127
118
108
101
92
129
130
120
112
108
154
144
134
125
127
156
147
139
131
161
141
102
90
87
78
78
72
122
114
112
108
102
95
137
130
123
112
108
109
24
97
97
92
83
80
129
129
119
110
104
142
142
132
124
115
155
170
102
102
93
89
83
80
128
129
122
114
110
103
155
146
138
140
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
8N@
9.38
10N@
7.50
75
12N@
6.25
14N@
5.36
15N@
5.00
8N@
10.00
10N@
8.00
80
12N@
6.67
14N@
5.71
16N@
5.00
56
60
66
72
78
60
66
72
78
84
60
66
72
78
84
66
72
78
84
90
66
72
78
84
90
60
66
72
78
84
90
60
66
72
78
84
90
66
72
78
84
90
96
66
72
78
84
90
96
66
72
78
84
90
96
4
29
26
27
26
27
32
32
30
31
31
38
35
36
35
34
41
41
37
38
37
41
42
41
39
38
28
30
29
30
30
53
31
31
33
32
33
34
36
34
33
34
36
34
39
38
36
36
36
37
42
41
41
39
39
40
5
33
32
32
32
29
39
37
36
35
36
43
42
41
42
39
48
46
44
44
42
52
52
47
46
46
31
31
32
31
32
54
35
35
37
36
37
36
44
42
39
38
39
37
47
46
43
42
41
40
53
50
49
45
46
46
6
40
38
35
34
34
42
42
42
39
39
51
50
46
47
46
56
52
53
52
50
60
59
54
55
52
37
35
33
33
35
56
41
39
43
42
42
40
50
47
46
47
44
43
57
54
50
50
48
47
62
57
58
54
54
55
7
43
42
41
41
37
50
49
45
46
45
59
55
54
54
52
63
61
61
57
58
69
67
65
63
60
42
38
38
37
37
56
47
46
50
46
45
44
57
54
53
49
50
50
64
59
58
56
53
53
70
69
66
61
62
58
8
49
48
44
43
43
59
55
54
48
49
68
62
63
61
56
72
70
68
64
66
77
74
73
67
69
45
45
41
41
39
57
53
52
55
51
51
49
65
59
60
56
56
54
73
67
66
64
61
61
78
76
73
69
70
68
108
20
116
116
99
100
89
131
132
123
114
110
22
128
118
118
101
103
154
134
136
127
128
24
140
130
120
121
105
26
152
142
132
122
123
148
141
139
139
153
144
134
125
138
139
131
152
143
156
154
152
141
163
164
171
151
153
144
171
173
176
169
171
146
103
103
92
88
83
90
129
115
120
112
109
102
174
177
112
105
106
94
96
95
139
132
127
122
115
111
133
129
121
116
117
127
113
108
109
98
103
28
137
129
116
111
112
105
131
126
118
114
118
130
125
118
131
132
136
136
138
125
120
140
143
130
149
147
156
149
143
136
127
146
145
152
155
155
164
142
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
9N@
10.00
10N@
9.00
11N@
8.18
90
12N@
7.50
15N@
6.00
18N@
5.00
10N@
10.00
12N@
8.33
15N@
6.67
100
16N@
6.25
17N@
5.88
18N@
5.56
20N@
5.00
72
84
90
96
102
72
84
90
96
102
72
84
90
96
102
78
84
90
96
108
78
84
90
96
108
78
84
90
96
108
78
84
96
102
108
78
84
96
102
108
78
84
96
102
108
84
96
102
108
120
84
96
102
108
120
84
96
102
108
120
84
96
102
108
120
4
40
41
54
55
55
42
42
42
43
43
43
43
45
47
48
44
45
46
46
45
47
49
50
48
51
51
51
52
53
57
45
47
55
55
56
48
48
47
48
48
53
53
52
53
53
53
53
53
54
56
55
54
55
55
56
55
55
56
57
59
58
60
59
60
68
5
42
44
55
56
57
46
45
46
46
45
47
49
48
48
49
49
49
50
48
49
54
54
52
53
57
62
61
58
58
59
49
50
56
56
57
53
52
51
52
51
56
56
56
56
56
58
57
57
58
61
61
59
59
60
62
61
60
61
60
64
66
65
65
67
73
6
46
48
56
57
57
48
49
50
48
48
51
50
51
53
57
53
52
52
52
55
66
62
60
58
59
74
73
70
68
64
52
53
56
57
58
56
55
55
55
55
67
61
61
60
59
69
63
62
62
64
70
65
66
65
67
70
65
66
68
69
77
73
71
71
90
7
49
48
56
57
58
52
51
51
53
53
59
55
53
56
58
60
56
60
58
56
75
68
69
66
64
84
80
79
78
76
55
55
57
58
59
62
63
58
58
59
75
69
68
66
65
72
71
66
67
70
77
72
73
69
71
81
72
73
73
75
94
83
80
80
101
8
55
50
57
58
59
61
58
56
56
57
65
62
59
60
61
68
65
68
63
64
82
76
78
72
72
99
89
90
87
85
58
58
62
61
61
70
68
66
62
62
86
78
72
74
73
80
75
74
76
76
88
80
79
78
78
94
84
84
82
84
103
99
89
89
108
109
20
119
121
105
107
105
142
137
126
113
115
22
141
124
125
110
112
155
148
129
129
124
24
143
135
128
128
130
26
28
148
138
131
133
149
141
133
131
153
137
138
129
132
124
150
142
134
138
148
150
163
149
151
132
135
152
153
137
156
160
168
173
168
172
131
118
125
121
107
140
133
126
127
127
131
133
123
141
139
149
161
168
143
133
130
149
142
134
155
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(ft.)
(ft.)
(in.)
10N@
11.00
12N@
9.17
14N@
7.86
110
16N@
6.88
18N@
6.11
20N@
5.50
10N@
12.00
12N@
10.00
15N@
8.00
120
16N@
7.50
18N@
6.67
20N@
6.00
24N@
5.00
84
96
108
114
120
84
96
108
114
120
84
96
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
96
102
108
114
120
4
54
62
63
63
64
58
57
58
59
59
60
60
60
61
60
62
63
64
65
66
64
66
66
67
68
68
69
69
69
66
63
64
78
78
79
68
68
69
70
70
69
70
70
70
72
70
70
70
70
70
71
72
72
72
73
76
75
75
77
77
83
81
83
86
86
5
58
62
63
64
64
62
62
64
65
62
66
65
64
65
66
68
67
68
70
69
71
70
71
73
74
77
75
77
77
72
66
67
79
79
81
69
69
70
70
71
74
73
73
73
74
76
74
74
73
75
77
78
79
76
77
82
83
81
82
84
90
88
91
96
97
6
61
63
64
67
66
66
66
68
66
67
71
69
69
69
69
72
74
73
74
75
77
80
77
79
79
82
81
83
86
77
69
69
82
82
83
71
72
72
71
72
77
78
80
78
78
80
78
80
81
79
85
83
84
85
84
89
87
88
87
90
96
99
96
109
107
7
65
65
67
68
69
70
70
72
71
72
76
74
72
74
74
79
80
81
80
81
87
89
83
85
88
99
94
94
91
83
72
71
83
83
84
77
78
75
75
76
82
84
85
83
84
85
86
85
86
85
89
87
88
90
89
94
92
94
93
96
111
108
103
121
117
8
69
69
69
72
72
74
74
75
75
74
84
83
78
79
80
89
89
83
86
88
99
101
94
97
91
106
109
106
101
93
76
75
83
83
84
82
80
81
82
80
90
88
90
88
89
90
92
90
91
90
95
97
94
96
95
110
105
101
103
102
121
118
119
141
143
110
20
144
22
24
131
133
128
133
136
137
140
158
156
158
158
161
160
129
131
128
133
138
137
26
28
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
2N@
3048
3N@
2032
6096
4N@
1524
5N@
1219
6N@
1016
8N@
762
2N@
3353
3N@
2234
6706
4N@
1676
5N@
1341
6N@
1119
8N@
838
3N@
2539
4N@
1905
5N@
1524
7620
6N@
1271
8N@
951
10N@
762
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
27
24
24
24
22
22
22
22
22
24
22
24
24
24
24
25
28
25
27
31
27
27
22
22
22
22
22
24
22
24
24
24
24
24
28
27
27
27
22
22
22
24
22
22
22
24
24
22
22
24
24
24
24
24
24
24
24
31
28
27
27
27
39
34
31
31
33
40
28
28
28
22
24
24
22
24
24
25
24
24
28
27
27
37
33
33
31
31
31
27
22
24
24
22
24
25
24
24
31
28
27
40
36
33
27
27
22
24
24
27
24
22
24
24
27
25
24
24
25
36
30
27
27
27
43
39
34
36
33
57
49
45
42
42
53
28
28
28
28
24
24
28
25
25
31
30
27
37
33
33
48
43
43
31
31
31
27
28
24
28
25
24
36
30
27
40
34
33
54
46
42
28
28
28
24
24
30
28
25
25
25
37
34
30
28
27
43
37
34
33
36
58
49
45
42
43
73
62
57
54
55
67
28
28
28
28
24
24
31
30
28
39
34
33
43
42
39
61
54
51
33
33
31
28
28
24
34
30
28
40
36
33
49
42
39
64
57
51
33
30
28
24
25
37
31
30
28
28
46
39
36
34
33
57
46
42
39
37
71
61
57
51
51
94
80
71
64
65
80
28
28
28
30
28
25
37
34
33
46
39
40
54
46
45
76
62
60
33
33
33
33
30
28
39
37
33
51
42
39
58
48
45
83
68
60
39
33
30
30
25
43
39
36
31
31
57
48
42
39
39
67
55
48
45
45
86
74
65
58
60
116
97
83
77
77
111
267
74
62
60
110
79
73
131
106
94
147
135
115
176
152
143
294
83
73
62
112
83
79
144
126
107
162
150
138
205
165
162
320
92
77
68
121
101
85
149
134
128
179
153
141
210
183
167
347
104
79
71
125
118
101
159
149
135
210
164
159
374
112
98
73
132
122
119
179
152
135
211
179
165
214
177
219
193
222
185
82
67
62
104
82
77
141
118
107
165
149
128
204
162
152
228
201
92
76
68
113
91
80
143
132
118
187
150
137
231
103
82
71
125
110
88
158
146
129
204
164
152
247
113
91
76
131
121
110
177
150
134
116
109
86
140
125
122
199
159
144
173
156
198
165
179
155
211
168
214
189
220
222
195
113
100
82
77
71
147
131
107
103
94
186
152
138
124
112
226
128
106
88
80
79
162
144
132
118
109
199
167
150
138
131
244
132
121
100
86
80
177
149
134
128
126
144
125
121
110
101
199
158
150
135
131
152
132
122
121
118
201
179
152
143
137
192
158
152
143
208
174
156
150
186
165
161
176
155
152
146
205
179
156
161
199
168
173
213
189
174
216
220
192
219
192
180
226
202
229
220
247
248
234
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
3N@
2844
4N@
2134
5N@
1707
8534
6N@
1423
7N@
1219
8N@
1067
10N@
853
3N@
3048
4N@
2286
5N@
1829
9144
6N@
1524
8N@
1143
10N@
914
3N@
3252
4N@
2438
9754
5N@
1951
6N@
1625
8N@
1219
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
27
27
27
22
22
22
22
22
22
24
24
22
24
27
25
24
30
27
25
36
34
31
27
27
27
24
24
22
22
24
22
22
24
24
24
24
24
24
31
30
27
25
37
36
33
33
27
24
25
22
27
22
22
22
22
22
22
24
25
24
24
24
33
28
27
27
40
27
27
27
24
22
22
27
25
25
31
30
28
36
33
31
42
37
36
54
45
45
27
27
27
28
27
24
24
24
28
25
25
25
36
30
28
27
48
45
39
34
57
54
46
45
28
25
25
25
28
27
22
24
30
27
25
25
36
31
30
28
48
40
37
36
53
28
28
28
30
27
25
36
31
30
42
36
34
48
40
40
55
48
43
68
61
57
31
28
28
28
34
31
27
25
37
34
31
30
43
40
36
34
60
55
51
48
76
70
58
58
31
27
27
28
34
30
30
25
40
36
33
31
46
40
37
36
60
52
48
46
67
33
30
28
36
31
30
43
39
36
52
45
42
61
52
46
71
58
57
85
74
68
36
33
30
28
43
37
33
33
45
40
36
36
55
48
43
39
76
65
62
58
98
85
77
71
39
36
31
30
39
36
33
31
49
42
39
36
58
52
45
42
80
67
58
57
80
36
33
31
40
37
34
51
45
40
61
54
48
73
64
57
82
74
64
104
89
82
40
37
33
31
49
45
39
36
55
48
43
40
67
57
51
46
94
79
73
68
116
103
86
80
40
39
37
34
48
42
37
36
58
51
48
40
70
60
54
51
91
82
74
64
112
267
106
91
79
141
118
104
165
147
138
204
176
152
294
116
98
86
155
143
126
187
159
152
320
126
113
98
158
144
134
202
170
159
205
165
211
183
208
183
213
217
219
222
119
104
95
85
155
128
115
110
186
152
149
128
137
118
106
95
187
153
129
116
199
167
150
140
204
162
152
208
180
165
240
229
251
125
104
92
79
153
140
124
104
198
164
147
138
204
176
152
219
347
132
124
119
179
158
147
374
146
128
121
201
159
152
193
167
211
177
214
217
146
122
109
97
189
155
153
131
174
138
124
109
222
187
156
135
177
147
125
112
223
190
173
156
190
159
153
205
174
164
198
176
211
183
214
187
220
131
113
100
86
170
143
122
126
152
126
115
100
198
156
144
134
152
132
119
121
199
180
152
147
168
138
128
115
187
156
152
204
170
158
193
174
211
179
207
165
211
183
214
217
201
159
152
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
4N@
2667
5N@
2134
10668
6N@
1777
7N@
1524
8N@
1335
4N@
2896
5N@
2316
11582
6N@
1929
8N@
1448
4N@
3048
5N@
2438
6N@
2033
12192
7N@
1740
8N@
1524
10N@
1219
711
813
914
1016
711
813
914
1016
711
813
914
1016
711
813
914
1016
711
813
914
1016
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
27
24
22
22
22
22
22
24
24
25
24
24
24
28
25
25
25
31
30
28
27
24
22
22
24
22
24
24
25
25
24
24
25
30
28
28
30
25
25
25
24
25
22
24
24
25
25
24
25
24
25
25
27
25
25
30
30
31
28
28
31
30
43
37
36
34
34
40
28
27
24
24
30
27
25
25
36
31
30
30
40
36
34
33
45
40
39
36
28
25
24
24
30
30
30
30
36
31
31
30
43
42
39
36
30
28
27
25
25
31
30
30
30
30
36
33
31
31
31
39
36
36
33
34
43
40
37
40
37
58
54
54
48
48
53
34
31
30
25
39
36
34
33
45
40
37
36
51
45
42
40
58
54
48
45
31
31
30
30
37
36
34
33
45
40
37
36
57
52
48
45
34
33
33
30
30
39
36
36
34
34
45
40
39
36
36
49
46
43
42
42
57
54
51
49
48
76
70
67
61
61
67
40
36
34
31
48
43
40
37
55
49
46
42
64
58
52
48
71
62
58
55
39
36
34
33
46
42
39
37
52
49
46
43
70
62
60
58
43
43
37
36
36
48
45
40
43
39
57
51
45
42
46
64
58
52
49
54
71
68
58
58
62
95
89
83
76
77
80
46
42
40
39
55
51
43
40
65
57
54
51
77
70
62
58
88
79
71
65
46
42
40
39
54
49
46
45
61
58
54
49
83
74
71
70
55
46
43
43
37
57
51
48
48
46
65
58
54
54
54
77
70
64
58
61
86
79
73
70
70
118
103
98
89
86
113
267
149
137
124
112
187
152
149
141
294
165
149
140
134
202
167
155
152
320
174
158
144
141
347
204
167
159
143
374
205
189
168
161
190
171
159
205
195
171
198
186
207
168
155
208
180
171
211
183
214
216
217
210
176
214
198
219
219
149
138
124
112
165
153
150
138
202
176
162
155
222
150
144
140
134
187
167
156
152
165
158
146
141
204
192
168
159
189
167
159
141
205
183
162
161
205
174
165
199
176
210
180
171
211
213
183
211
216
219
190
186
155
143
126
222
189
174
158
147
225
190
189
158
158
190
171
176
177
205
193
193
179
211
210
196
217
244
214
219
170
153
129
116
116
185
152
149
147
141
222
187
155
143
125
116
199
167
156
173
149
204
170
159
162
210
193
173
196
211
199
198
211
201
208
182
199
213
202
244
248
219
231
253
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
4N@
3200
5N@
2560
6N@
2134
12802
7N@
1829
8N@
1600
10N@
1280
4N@
3429
5N@
2743
6N@
2286
13716
7N@
1960
8N@
1713
9N@
1524
10N@
1372
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
27
24
24
24
24
24
24
22
24
24
25
27
25
25
24
30
30
28
27
30
27
33
30
30
30
31
40
37
36
34
34
27
28
28
27
27
24
24
24
30
30
28
28
28
30
30
30
30
30
30
27
31
30
30
31
33
36
33
34
34
34
39
37
36
36
34
40
31
28
28
28
28
33
31
31
30
30
37
34
31
31
30
42
39
36
34
34
48
40
39
37
39
57
54
51
46
45
31
31
31
31
33
33
31
31
31
31
36
34
31
31
31
40
39
36
34
34
45
42
40
39
42
51
46
46
43
42
57
52
49
46
46
53
37
33
31
30
31
42
37
36
36
34
48
45
39
36
37
54
51
46
43
42
60
57
52
48
48
77
68
67
61
58
37
33
33
33
34
40
37
36
36
36
46
42
40
39
37
52
49
45
43
42
57
54
51
48
49
67
58
58
55
54
73
70
68
60
58
67
43
39
36
34
36
52
46
42
40
40
58
52
49
46
43
67
60
57
52
51
76
68
62
58
61
92
89
80
77
73
42
40
36
36
36
49
45
43
40
40
57
51
48
45
43
65
60
58
54
51
71
68
61
58
62
82
73
71
70
68
89
89
80
73
74
80
51
48
42
40
39
61
54
49
46
45
67
61
58
52
49
77
73
68
61
58
92
83
76
73
71
115
104
95
91
83
49
46
43
42
40
57
54
51
48
45
67
60
57
54
51
77
70
68
61
58
86
79
76
70
71
98
91
86
82
82
109
98
95
92
83
114
267
150
141
138
125
112
186
165
153
150
141
294
167
150
144
140
134
320
186
167
144
144
141
347
199
176
168
161
144
374
205
192
182
162
161
187
168
156
152
204
192
168
159
193
187
171
199
176
204
177
162
155
210
180
171
211
213
185
211
216
219
211
196
176
216
202
222
174
167
152
141
141
190
168
161
159
143
205
190
170
162
162
190
183
167
159
193
176
174
211
199
177
213
202
220
219
220
149
141
132
124
113
186
165
153
141
140
167
150
141
140
135
202
182
164
158
146
204
176
164
152
208
207
182
173
211
213
185
213
198
176
216
202
222
217
220
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
5N@
2926
6N@
2438
14630
8N@
1829
9N@
1625
12N@
1219
5N@
3048
6N@
2539
8N@
1905
15240
9N@
1695
10N@
1524
12N@
1271
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
27
28
28
28
28
30
30
30
28
28
28
30
30
45
42
40
39
39
37
52
51
49
49
46
46
52
51
46
45
45
40
27
25
28
30
30
30
30
28
28
30
30
31
33
31
31
31
36
36
36
34
36
36
36
36
39
37
36
36
34
36
51
46
45
45
40
40
40
39
34
33
31
31
31
42
37
36
34
34
33
54
49
48
45
45
42
65
62
58
55
54
52
77
71
65
61
58
57
34
33
33
33
33
30
42
36
34
34
34
34
46
43
40
37
43
40
51
48
48
46
45
48
57
54
51
51
48
46
73
65
61
58
60
58
53
46
43
40
37
37
36
52
49
46
45
40
40
67
62
58
55
54
54
82
77
74
68
68
65
106
97
85
79
77
73
45
43
42
37
37
36
51
46
45
45
39
40
58
55
52
49
54
52
65
60
62
60
57
57
73
70
68
67
61
60
97
85
86
79
77
73
67
55
52
48
45
43
43
62
58
54
52
48
46
83
76
73
70
65
64
104
94
88
83
80
79
125
113
109
100
91
91
57
51
46
46
45
45
62
57
55
54
49
49
76
70
62
60
62
60
82
79
77
70
68
73
89
89
80
77
71
73
119
109
100
101
91
91
80
67
61
55
54
49
49
76
70
67
60
57
55
95
88
82
79
76
73
118
110
103
98
94
92
149
138
122
113
113
104
65
60
57
52
48
49
71
70
60
60
58
57
88
79
76
73
70
70
98
91
86
86
82
79
110
101
97
92
89
85
149
128
122
113
104
104
115
267
202
202
173
171
147
149
294
320
347
374
205
187
173
174
149
207
190
176
177
223
208
193
179
211
210
198
220
205
192
193
179
225
210
195
196
238
214
199
241
228
246
202
187
171
173
147
143
205
204
189
174
174
150
207
207
192
177
179
210
210
195
180
211
211
198
222
192
192
179
164
225
195
196
183
228
214
199
241
243
229
244
246
220
207
222
244
231
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
5N@
3353
6N@
2795
16764
7N@
2396
9N@
1862
11N@
1524
5N@
3658
6N@
3048
8N@
2286
18288
10N@
1829
12N@
1524
15N@
1219
(mm)
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
27
31
31
30
30
34
36
28
30
30
27
30
28
31
31
31
30
31
33
36
36
37
36
36
36
45
42
40
40
39
39
31
31
33
33
36
37
30
30
28
28
28
33
36
34
34
34
42
43
39
42
40
37
40
39
49
46
43
45
48
43
60
58
57
57
52
52
33
31
31
33
31
36
36
33
33
33
31
31
30
36
36
34
33
33
33
43
42
45
43
40
40
54
49
51
49
46
46
34
33
34
34
36
37
36
34
36
34
34
33
43
43
39
39
45
45
48
51
49
46
48
48
58
55
54
52
52
49
73
71
68
62
61
65
41
36
34
34
36
36
36
39
36
36
36
36
33
42
40
39
37
36
36
51
48
49
48
48
46
64
58
55
58
55
54
40
40
36
36
36
37
43
42
37
36
36
36
51
46
46
48
49
46
55
57
55
55
55
49
68
67
61
58
61
57
95
85
79
76
73
68
47
37
36
37
36
36
37
43
42
39
37
37
36
49
46
43
42
40
39
58
57
58
57
54
52
73
67
65
62
60
58
43
42
42
42
39
37
48
45
45
43
40
40
58
55
54
49
51
51
65
65
64
58
62
57
79
76
71
70
71
62
107
98
100
89
82
82
54
43
42
40
39
40
39
49
46
43
42
43
42
54
51
49
46
45
45
68
60
64
64
60
58
82
80
77
71
70
67
49
46
45
43
45
40
54
49
49
48
48
42
64
60
57
58
61
54
73
74
68
67
73
62
88
85
82
80
79
74
119
110
106
101
92
95
116
134
94
89
85
79
77
71
112
101
128
94
89
83
129
113
110
104
101
97
156
153
155
137
138
124
204
190
171
159
161
146
103
97
94
89
83
83
119
116
103
104
97
94
167
153
143
126
122
119
176
168
156
155
152
143
147
106
95
97
86
89
82
128
112
138
104
95
92
144
132
128
118
107
104
173
159
156
156
141
135
161
122
106
98
98
91
83
128
129
147
106
106
97
152
146
135
129
121
110
201
176
170
159
161
144
207
195
176
164
168
113
103
103
98
91
83
138
119
118
112
103
101
183
170
155
146
134
134
204
193
183
165
179
146
211
199
180
174
129
115
110
104
100
94
138
140
124
124
115
106
186
186
173
158
149
137
205
205
195
187
182
165
207
192
173
182
164
208
198
199
170
216
219
189
228
211
248
238
254
174
124
109
110
98
100
92
146
132
162
116
112
109
165
153
149
137
138
124
204
192
186
174
162
165
188
128
124
110
110
101
103
150
146
164
135
119
109
179
164
156
150
140
125
207
198
190
176
168
217
204
187
132
126
116
112
107
103
167
140
141
124
125
112
202
189
189
176
161
155
220
210
140
134
129
119
109
104
168
168
143
143
126
129
220
207
192
192
179
164
213
199
199
165
216
180
244
211
225
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
6N@
3301
8N@
2475
9N@
2201
19812
10N@
1981
11N@
1801
13N@
1524
7N@
3048
9N@
2371
10N@
2134
21336
11N@
1939
12N@
1777
14N@
1524
(mm)
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
27
33
31
34
33
36
37
36
34
36
57
45
39
37
42
43
46
46
43
40
40
49
48
49
45
45
55
55
52
51
51
36
34
36
36
37
36
39
37
46
48
48
49
40
45
43
45
45
46
48
45
46
48
43
45
51
49
48
48
45
45
54
55
52
51
49
49
33
42
37
36
36
37
46
45
42
42
58
48
48
48
48
45
54
54
51
51
49
58
58
57
55
54
67
64
61
61
61
37
39
40
37
39
40
46
45
51
49
51
51
51
54
52
51
49
49
61
58
57
55
52
54
61
58
55
55
54
54
65
64
62
60
58
60
41
45
43
43
39
40
57
51
49
49
58
57
58
57
55
52
61
60
60
58
55
67
65
65
62
61
82
79
74
73
68
45
45
45
43
42
43
55
52
57
55
54
52
57
61
62
57
55
54
67
65
64
62
60
58
74
68
67
62
62
60
79
80
71
73
65
65
47
49
49
48
46
46
60
58
58
52
58
65
62
60
61
57
73
68
65
64
65
77
76
73
68
70
95
91
86
79
79
52
49
48
48
46
46
60
58
64
64
58
57
67
71
65
64
60
60
76
74
68
71
70
67
83
82
71
71
71
67
94
91
82
82
77
76
54
58
52
51
49
48
65
64
61
62
62
73
71
70
65
65
86
77
76
74
70
88
89
82
80
76
107
103
95
92
86
58
55
52
51
51
52
67
67
71
67
67
67
79
82
76
70
68
70
89
85
79
82
74
73
94
86
82
82
76
76
106
103
95
91
86
86
117
134
124
119
113
109
101
171
156
147
132
132
190
176
162
153
135
195
196
182
168
164
228
214
199
186
176
174
171
144
146
129
129
210
195
193
182
168
228
214
216
202
189
188
173
174
147
149
132
228
213
198
185
186
217
205
192
208
210
243
213
219
214
244
232
257
164
156
155
140
134
126
180
165
158
152
143
140
195
189
185
173
168
195
176
176
196
189
171
167
198
193
180
204
198
196
177
176
173
202
185
185
220
208
192
210
214
207
193
177
168
171
213
201
183
176
220
210
190
225
214
225
205
205
189
210
213
231
235
204
205
131
126
112
113
106
103
164
156
158
149
138
140
176
182
162
158
143
146
205
192
174
162
164
152
147
141
125
122
116
113
189
176
161
150
137
192
193
179
167
161
229
214
199
186
189
232
219
207
195
240
210
152
134
129
116
116
107
182
170
167
161
152
141
204
193
183
167
161
162
161
144
144
137
124
119
192
192
177
164
155
211
211
196
185
171
231
253
152
152
138
132
124
119
190
192
182
170
164
153
231
217
205
208
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
8N@
2859
10N@
2286
22860 12N@
1905
14N@
1634
15N@
1524
8N@
3048
10N@
2438
24384
12N@
2033
14N@
1740
16N@
1524
(mm)
1422
1524
1676
1829
1981
1524
1676
1829
1981
2134
1524
1676
1829
1981
2134
1676
1829
1981
2134
2286
1676
1829
1981
2134
2286
1524
1676
1829
1981
2134
2286
1524
1676
1829
1981
2134
2286
1676
1829
1981
2134
2286
2438
1676
1829
1981
2134
2286
2438
1676
1829
1981
2134
2286
2438
27
43
39
40
39
40
48
48
45
46
46
57
52
54
52
51
61
61
55
57
55
61
62
61
58
57
42
45
43
45
45
79
46
46
49
48
49
51
54
51
49
51
54
51
58
57
54
54
54
55
62
61
61
58
58
60
33
49
48
48
48
43
58
55
54
52
54
64
62
61
62
58
71
68
65
65
62
77
77
70
68
68
46
46
48
46
48
80
52
52
55
54
55
54
65
62
58
57
58
55
70
68
64
62
61
60
79
74
73
67
68
68
41
60
57
52
51
51
62
62
62
58
58
76
74
68
70
68
83
77
79
77
74
89
88
80
82
77
55
52
49
49
52
83
61
58
64
62
62
60
74
70
68
70
65
64
85
80
74
74
71
70
92
85
86
80
80
82
47
64
62
61
61
55
74
73
67
68
67
88
82
80
80
77
94
91
91
85
86
103
100
97
94
89
62
57
57
55
55
83
70
68
74
68
67
65
85
80
79
73
74
74
95
88
86
83
79
79
104
103
98
91
92
86
54
73
71
65
64
64
88
82
80
71
73
101
92
94
91
83
107
104
101
95
98
115
110
109
100
103
67
67
61
61
58
85
79
77
82
76
76
73
97
88
89
83
83
80
109
100
98
95
91
91
116
113
109
103
104
101
118
134
173
173
147
149
132
195
196
183
170
164
147
190
176
176
150
153
229
199
202
189
190
161
208
193
179
180
156
174
226
211
196
182
183
205
207
195
226
213
220
210
207
207
229
226
210
243
244
254
225
228
214
254
257
262
251
254
217
153
153
137
131
124
134
192
171
179
167
162
152
259
263
167
156
158
140
143
141
207
196
189
182
171
165
198
192
180
173
174
189
168
161
162
146
153
188
228
214
199
186
232
204
192
173
165
167
156
195
187
176
170
176
193
186
176
195
196
202
202
205
186
179
208
213
193
222
219
232
222
213
202
189
217
216
226
231
231
244
211
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
9N@
3048
10N@
2743
11N@
2493
27432
12N@
2286
15N@
1829
18N@
1524
10N@
3048
12N@
2539
15N@
2033
30480 16N@
1905
17N@
1792
18N@
1695
20N@
1524
(mm)
1829
2134
2286
2438
2591
1829
2134
2286
2438
2591
1829
2134
2286
2438
2591
1981
2134
2286
2438
2743
1981
2134
2286
2438
2743
1981
2134
2286
2438
2743
1981
2134
2438
2591
2743
1981
2134
2438
2591
2743
1981
2134
2438
2591
2743
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
27
60
61
80
82
82
62
62
62
64
64
64
64
67
70
71
65
67
68
68
67
70
73
74
71
76
76
76
77
79
85
67
70
82
82
83
71
71
70
71
71
79
79
77
79
79
79
79
79
80
83
82
80
82
82
83
82
82
83
85
88
86
89
88
89
101
33
62
65
82
83
85
68
67
68
68
67
70
73
71
71
73
73
73
74
71
73
80
80
77
79
85
92
91
86
86
88
73
74
83
83
85
79
77
76
77
76
83
83
83
83
83
86
85
85
86
91
91
88
88
89
92
91
89
91
89
95
98
97
97
100
109
41
68
71
83
85
85
71
73
74
71
71
76
74
76
79
85
79
77
77
77
82
98
92
89
86
88
110
109
104
101
95
77
79
83
85
86
83
82
82
82
82
100
91
91
89
88
103
94
92
92
95
104
97
98
97
100
104
97
98
101
103
115
109
106
106
134
47
73
71
83
85
86
77
76
76
79
79
88
82
79
83
86
89
83
89
86
83
112
101
103
98
95
125
119
118
116
113
82
82
85
86
88
92
94
86
86
88
112
103
101
98
97
107
106
98
100
104
115
107
109
103
106
121
107
109
109
112
140
124
119
119
150
54
82
74
85
86
88
91
86
83
83
85
97
92
88
89
91
101
97
101
94
95
122
113
116
107
107
147
132
134
129
126
86
86
92
91
91
104
101
98
92
92
128
116
107
110
109
119
112
110
113
113
131
119
118
116
116
140
125
125
122
125
153
147
132
132
161
119
134
177
180
156
159
156
211
204
187
168
171
147
210
185
186
164
167
231
220
192
192
185
205
192
196
185
174
188
220
205
195
198
222
211
199
210
198
195
228
204
231
223
211
199
205
220
223
243
222
225
196
201
226
228
204
232
238
250
257
250
256
195
176
186
180
159
208
198
187
189
189
198
193
195
198
183
210
207
222
222
240
250
161
213
201
190
190
193
213
LRFD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
10N@
3353
12N@
2795
14N@
2396
33528
16N@
2097
18N@
1862
20N@
1676
10N@
3658
12N@
3048
15N@
2438
36576 16N@
2286
18N@
2033
20N@
1829
24N@
1524
(mm)
2134
2438
2743
2896
3048
2134
2438
2743
2896
3048
2134
2438
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
27
80
92
94
94
95
86
85
86
88
88
89
89
89
91
89
92
94
95
97
98
95
98
98
100
101
101
103
103
103
98
94
95
116
116
118
101
101
103
104
104
103
104
104
104
107
104
104
104
104
104
106
107
107
107
109
113
112
112
115
115
124
121
124
128
128
33
86
92
94
95
95
92
92
95
97
92
98
97
95
97
98
101
100
101
104
103
106
104
106
109
110
115
112
115
115
107
98
100
118
118
121
103
103
104
104
106
110
109
109
109
110
113
110
110
109
112
115
116
118
113
115
122
124
121
122
125
134
131
135
143
144
41
91
94
95
100
98
98
98
101
98
100
106
103
103
103
103
107
110
109
110
112
115
119
115
118
118
122
121
124
128
115
103
103
122
122
124
106
107
107
106
107
115
116
119
116
116
119
116
119
121
118
126
124
125
126
125
132
129
131
129
134
143
147
143
162
159
47
97
97
100
101
103
104
104
107
106
107
113
110
107
110
110
118
119
121
119
121
129
132
124
126
131
147
140
140
135
124
107
106
124
124
125
115
116
112
112
113
122
125
126
124
125
126
128
126
128
126
132
129
131
134
132
140
137
140
138
143
165
161
153
180
174
54
103
103
103
107
107
110
110
112
112
110
125
124
116
118
119
132
132
124
128
131
147
150
140
144
135
158
162
158
150
138
113
112
124
124
125
122
119
121
122
119
134
131
134
131
132
134
137
134
135
134
141
144
140
143
141
164
156
150
153
152
180
176
177
210
213
120
134
214
147
161
195
198
190
198
202
204
208
235
232
235
235
240
238
192
195
190
198
205
204
174
188
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
2N@
3048
3N@
2032
6096
4N@
1524
5N@
1219
6N@
1016
8N@
762
2N@
3353
3N@
2234
6706
4N@
1676
5N@
1341
6N@
1119
8N@
838
3N@
2539
4N@
1905
5N@
1524
7620
6N@
1271
8N@
951
10N@
762
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
508
610
711
813
914
18
24
24
24
22
22
22
22
22
24
22
24
24
24
24
25
28
25
27
31
27
27
22
22
22
22
22
24
22
24
24
24
24
24
28
27
27
27
22
22
22
24
22
22
22
24
24
22
22
24
24
24
24
24
24
24
24
31
28
27
27
27
39
34
31
31
33
27
28
28
28
22
24
24
22
24
24
25
24
24
28
27
27
37
33
33
31
31
31
27
22
24
24
22
24
25
24
24
31
28
27
40
36
33
27
27
22
24
24
27
24
22
24
24
27
25
24
24
25
36
30
27
27
27
43
39
34
36
33
57
49
45
42
42
36
28
28
28
28
24
24
28
25
25
31
30
27
37
33
33
48
43
43
31
31
31
27
28
24
28
25
24
36
30
27
40
34
33
54
46
42
28
28
28
24
24
30
28
25
25
25
37
34
30
28
27
43
37
34
33
36
58
49
45
42
43
73
62
57
54
55
44
28
28
28
28
24
24
31
30
28
39
34
33
43
42
39
61
54
51
33
33
31
28
28
24
34
30
28
40
36
33
49
42
39
64
57
51
33
30
28
24
25
37
31
30
28
28
46
39
36
34
33
57
46
42
39
37
71
61
57
51
51
94
80
71
64
65
53
28
28
28
30
28
25
37
34
33
46
39
40
54
46
45
76
62
60
33
33
33
33
30
28
39
37
33
51
42
39
58
48
45
83
68
60
39
33
30
30
25
43
39
36
31
31
57
48
42
39
39
67
55
48
45
45
86
74
65
58
60
116
97
83
77
77
121
178
74
62
60
110
79
73
131
106
94
147
135
115
176
152
143
196
83
73
62
112
83
79
144
126
107
162
150
138
205
165
162
214
92
77
68
121
101
85
149
134
128
179
153
141
210
183
167
231
104
79
71
125
118
101
159
149
135
210
164
159
249
112
98
73
132
122
119
179
152
135
211
179
165
214
177
219
193
222
185
82
67
62
104
82
77
141
118
107
165
149
128
204
162
152
228
201
92
76
68
113
91
80
143
132
118
187
150
137
231
103
82
71
125
110
88
158
146
129
204
164
152
247
113
91
76
131
121
110
177
150
134
116
109
86
140
125
122
199
159
144
173
156
198
165
179
155
211
168
214
189
220
222
195
113
100
82
77
71
147
131
107
103
94
186
152
138
124
112
226
128
106
88
80
79
162
144
132
118
109
199
167
150
138
131
244
132
121
100
86
80
177
149
134
128
126
144
125
121
110
101
199
158
150
135
131
152
132
122
121
118
201
179
152
143
137
192
158
152
143
208
174
156
150
186
165
161
176
155
152
146
205
179
156
161
199
168
173
213
189
174
216
220
192
219
192
180
226
202
229
220
247
248
234
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
3N@
2844
4N@
2134
5N@
1707
8534
6N@
1423
7N@
1219
8N@
1067
10N@
853
3N@
3048
4N@
2286
5N@
1829
9144
6N@
1524
8N@
1143
10N@
914
3N@
3252
4N@
2438
9754
5N@
1951
6N@
1625
8N@
1219
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
610
711
813
914
18
27
27
22
22
22
22
22
22
24
24
22
24
27
25
24
30
27
25
36
34
31
27
27
27
24
24
22
22
24
22
22
24
24
24
24
24
24
31
30
27
25
37
36
33
33
27
24
25
22
27
22
22
22
22
22
22
24
25
24
24
24
33
28
27
27
27
27
27
27
24
22
22
27
25
25
31
30
28
36
33
31
42
37
36
54
45
45
27
27
27
28
27
24
24
24
28
25
25
25
36
30
28
27
48
45
39
34
57
54
46
45
28
25
25
25
28
27
22
24
30
27
25
25
36
31
30
28
48
40
37
36
36
28
28
28
30
27
25
36
31
30
42
36
34
48
40
40
55
48
43
68
61
57
31
28
28
28
34
31
27
25
37
34
31
30
43
40
36
34
60
55
51
48
76
70
58
58
31
27
27
28
34
30
30
25
40
36
33
31
46
40
37
36
60
52
48
46
44
33
30
28
36
31
30
43
39
36
52
45
42
61
52
46
71
58
57
85
74
68
36
33
30
28
43
37
33
33
45
40
36
36
55
48
43
39
76
65
62
58
98
85
77
71
39
36
31
30
39
36
33
31
49
42
39
36
58
52
45
42
80
67
58
57
53
36
33
31
40
37
34
51
45
40
61
54
48
73
64
57
82
74
64
104
89
82
40
37
33
31
49
45
39
36
55
48
43
40
67
57
51
46
94
79
73
68
116
103
86
80
40
39
37
34
48
42
37
36
58
51
48
40
70
60
54
51
91
82
74
64
122
178
106
91
79
141
118
104
165
147
138
204
176
152
196
116
98
86
155
143
126
187
159
152
214
126
113
98
158
144
134
202
170
159
205
165
211
183
208
183
213
217
219
222
119
104
95
85
155
128
115
110
186
152
149
128
137
118
106
95
187
153
129
116
199
167
150
140
204
162
152
208
180
165
240
229
251
125
104
92
79
153
140
124
104
198
164
147
138
204
176
152
219
231
132
124
119
179
158
147
249
146
128
121
201
159
152
193
167
211
177
214
217
146
122
109
97
189
155
153
131
174
138
124
109
222
187
156
135
177
147
125
112
223
190
173
156
190
159
153
205
174
164
198
176
211
183
214
187
220
131
113
100
86
170
143
122
126
152
126
115
100
198
156
144
134
152
132
119
121
199
180
152
147
168
138
128
115
187
156
152
204
170
158
193
174
211
179
207
165
211
183
214
217
201
159
152
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
4N@
2667
5N@
2134
10668
6N@
1777
7N@
1524
8N@
1335
4N@
2896
5N@
2316
11582
6N@
1929
8N@
1448
4N@
3048
5N@
2438
6N@
2033
12192
7N@
1740
8N@
1524
10N@
1219
711
813
914
1016
711
813
914
1016
711
813
914
1016
711
813
914
1016
711
813
914
1016
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
18
24
22
22
22
22
22
24
24
25
24
24
24
28
25
25
25
31
30
28
27
24
22
22
24
22
24
24
25
25
24
24
25
30
28
28
30
25
25
25
24
25
22
24
24
25
25
24
25
24
25
25
27
25
25
30
30
31
28
28
31
30
43
37
36
34
34
27
28
27
24
24
30
27
25
25
36
31
30
30
40
36
34
33
45
40
39
36
28
25
24
24
30
30
30
30
36
31
31
30
43
42
39
36
30
28
27
25
25
31
30
30
30
30
36
33
31
31
31
39
36
36
33
34
43
40
37
40
37
58
54
54
48
48
36
34
31
30
25
39
36
34
33
45
40
37
36
51
45
42
40
58
54
48
45
31
31
30
30
37
36
34
33
45
40
37
36
57
52
48
45
34
33
33
30
30
39
36
36
34
34
45
40
39
36
36
49
46
43
42
42
57
54
51
49
48
76
70
67
61
61
44
40
36
34
31
48
43
40
37
55
49
46
42
64
58
52
48
71
62
58
55
39
36
34
33
46
42
39
37
52
49
46
43
70
62
60
58
43
43
37
36
36
48
45
40
43
39
57
51
45
42
46
64
58
52
49
54
71
68
58
58
62
95
89
83
76
77
53
46
42
40
39
55
51
43
40
65
57
54
51
77
70
62
58
88
79
71
65
46
42
40
39
54
49
46
45
61
58
54
49
83
74
71
70
55
46
43
43
37
57
51
48
48
46
65
58
54
54
54
77
70
64
58
61
86
79
73
70
70
118
103
98
89
86
123
178
149
137
124
112
187
152
149
141
196
165
149
140
134
202
167
155
152
214
174
158
144
141
231
204
167
159
143
249
205
189
168
161
190
171
159
205
195
171
198
186
207
168
155
208
180
171
211
183
214
216
217
210
176
214
198
219
219
149
138
124
112
165
153
150
138
202
176
162
155
222
150
144
140
134
187
167
156
152
165
158
146
141
204
192
168
159
189
167
159
141
205
183
162
161
205
174
165
199
176
210
180
171
211
213
183
211
216
219
190
186
155
143
126
222
189
174
158
147
225
190
189
158
158
190
171
176
177
205
193
193
179
211
210
196
217
244
214
219
170
153
129
116
116
185
152
149
147
141
222
187
155
143
125
116
199
167
156
173
149
204
170
159
162
210
193
173
196
211
199
198
211
201
208
182
199
213
202
244
248
219
231
253
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
4N@
3200
5N@
2560
6N@
2134
12802
7N@
1829
8N@
1600
10N@
1280
4N@
3429
5N@
2743
6N@
2286
13716
7N@
1960
8N@
1713
9N@
1524
10N@
1372
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
813
914
1016
1118
1219
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
914
1016
1118
1219
1321
18
24
24
24
24
24
24
22
24
24
25
27
25
25
24
30
30
28
27
30
27
33
30
30
30
31
40
37
36
34
34
27
28
28
27
27
24
24
24
30
30
28
28
28
30
30
30
30
30
30
27
31
30
30
31
33
36
33
34
34
34
39
37
36
36
34
27
31
28
28
28
28
33
31
31
30
30
37
34
31
31
30
42
39
36
34
34
48
40
39
37
39
57
54
51
46
45
31
31
31
31
33
33
31
31
31
31
36
34
31
31
31
40
39
36
34
34
45
42
40
39
42
51
46
46
43
42
57
52
49
46
46
36
37
33
31
30
31
42
37
36
36
34
48
45
39
36
37
54
51
46
43
42
60
57
52
48
48
77
68
67
61
58
37
33
33
33
34
40
37
36
36
36
46
42
40
39
37
52
49
45
43
42
57
54
51
48
49
67
58
58
55
54
73
70
68
60
58
44
43
39
36
34
36
52
46
42
40
40
58
52
49
46
43
67
60
57
52
51
76
68
62
58
61
92
89
80
77
73
42
40
36
36
36
49
45
43
40
40
57
51
48
45
43
65
60
58
54
51
71
68
61
58
62
82
73
71
70
68
89
89
80
73
74
53
51
48
42
40
39
61
54
49
46
45
67
61
58
52
49
77
73
68
61
58
92
83
76
73
71
115
104
95
91
83
49
46
43
42
40
57
54
51
48
45
67
60
57
54
51
77
70
68
61
58
86
79
76
70
71
98
91
86
82
82
109
98
95
92
83
124
178
150
141
138
125
112
186
165
153
150
141
196
167
150
144
140
134
214
186
167
144
144
141
231
199
176
168
161
144
249
205
192
182
162
161
187
168
156
152
204
192
168
159
193
187
171
199
176
204
177
162
155
210
180
171
211
213
185
211
216
219
211
196
176
216
202
222
174
167
152
141
141
190
168
161
159
143
205
190
170
162
162
190
183
167
159
193
176
174
211
199
177
213
202
220
219
220
149
141
132
124
113
186
165
153
141
140
167
150
141
140
135
202
182
164
158
146
204
176
164
152
208
207
182
173
211
213
185
213
198
176
216
202
222
217
220
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
(mm)
5N@
2926
6N@
2438
14630
8N@
1829
9N@
1625
12N@
1219
5N@
3048
6N@
2539
8N@
1905
15240
9N@
1695
10N@
1524
12N@
1271
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
914
1016
1118
1219
1321
1422
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
1016
1118
1219
1321
1422
1524
18
28
19
19
19
20
20
19
19
19
19
20
20
23
21
20
20
23
24
25
24
21
24
23
24
33
30
28
27
25
26
18
17
19
20
20
20
19
19
19
20
20
21
22
21
21
21
24
24
24
23
24
24
24
24
26
25
24
24
23
24
30
28
27
26
25
25
27
39
34
33
31
31
31
42
37
36
34
34
33
54
49
48
45
45
42
65
62
58
55
54
52
77
71
65
61
58
57
34
33
33
33
33
30
42
36
34
34
34
34
46
43
40
37
43
40
51
48
48
46
45
48
57
54
51
51
48
46
73
65
61
58
60
58
36
46
43
40
37
37
36
52
49
46
45
40
40
67
62
58
55
54
54
82
77
74
68
68
65
106
97
85
79
77
73
45
43
42
37
37
36
51
46
45
45
39
40
58
55
52
49
54
52
65
60
62
60
57
57
73
70
68
67
61
60
97
85
86
79
77
73
44
55
52
48
45
43
43
62
58
54
52
48
46
83
76
73
70
65
64
104
94
88
83
80
79
125
113
109
100
91
91
57
51
46
46
45
45
62
57
55
54
49
49
76
70
62
60
62
60
82
79
77
70
68
73
89
89
80
77
71
73
119
109
100
101
91
91
53
67
61
55
54
49
49
76
70
67
60
57
55
95
88
82
79
76
73
118
110
103
98
94
92
149
138
122
113
113
104
65
60
57
52
48
49
71
70
60
60
58
57
88
79
76
73
70
70
98
91
86
86
82
79
110
101
97
92
89
85
149
128
122
113
104
104
125
178
202
202
173
171
147
149
196
214
231
249
205
187
173
174
149
207
190
176
177
223
208
193
179
211
210
198
220
205
192
193
179
225
210
195
196
238
214
199
241
228
246
202
187
171
173
147
143
205
204
189
174
174
150
207
207
192
177
179
210
210
195
180
211
211
198
222
192
192
179
164
225
195
196
183
228
214
199
241
243
229
244
246
220
207
222
244
231
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
5N@
3353
6N@
2795
16764
7N@
2396
9N@
1862
11N@
1524
5N@
3658
6N@
3048
8N@
2286
18288
10N@
1829
12N@
1524
15N@
1219
(mm)
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1118
1219
1321
1422
1524
1676
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
1219
1321
1422
1524
1676
1829
18
31
31
30
30
34
36
28
30
30
27
30
28
31
31
31
30
31
33
36
36
37
36
36
36
45
42
40
40
39
39
31
31
33
33
36
37
30
30
28
28
28
33
36
34
34
34
42
43
39
42
40
37
40
39
49
46
43
45
48
43
60
58
57
57
52
52
22
31
31
33
31
36
36
33
33
33
31
31
30
36
36
34
33
33
33
43
42
45
43
40
40
54
49
51
49
46
46
34
33
34
34
36
37
36
34
36
34
34
33
43
43
39
39
45
45
48
51
49
46
48
48
58
55
54
52
52
49
73
71
68
62
61
65
27
36
34
34
36
36
36
39
36
36
36
36
33
42
40
39
37
36
36
51
48
49
48
48
46
64
58
55
58
55
54
40
40
36
36
36
37
43
42
37
36
36
36
51
46
46
48
49
46
55
57
55
55
55
49
68
67
61
58
61
57
95
85
79
76
73
68
31
37
36
37
36
36
37
43
42
39
37
37
36
49
46
43
42
40
39
58
57
58
57
54
52
73
67
65
62
60
58
43
42
42
42
39
37
48
45
45
43
40
40
58
55
54
49
51
51
65
65
64
58
62
57
79
76
71
70
71
62
107
98
100
89
82
82
36
43
42
40
39
40
39
49
46
43
42
43
42
54
51
49
46
45
45
68
60
64
64
60
58
82
80
77
71
70
67
49
46
45
43
45
40
54
49
49
48
48
42
64
60
57
58
61
54
73
74
68
67
73
62
88
85
82
80
79
74
119
110
106
101
92
95
126
89
94
89
85
79
77
71
112
101
128
94
89
83
129
113
110
104
101
97
156
153
155
137
138
124
204
190
171
159
161
146
103
97
94
89
83
83
119
116
103
104
97
94
167
153
143
126
122
119
176
168
156
155
152
143
98
106
95
97
86
89
82
128
112
138
104
95
92
144
132
128
118
107
104
173
159
156
156
141
135
107
122
106
98
98
91
83
128
129
147
106
106
97
152
146
135
129
121
110
201
176
170
159
161
144
207
195
176
164
168
113
103
103
98
91
83
138
119
118
112
103
101
183
170
155
146
134
134
204
193
183
165
179
146
211
199
180
174
129
115
110
104
100
94
138
140
124
124
115
106
186
186
173
158
149
137
205
205
195
187
182
165
207
192
173
182
164
208
198
199
170
216
219
189
228
211
248
238
254
116
124
109
110
98
100
92
146
132
162
116
112
109
165
153
149
137
138
124
204
192
186
174
162
165
125
128
124
110
110
101
103
150
146
164
135
119
109
179
164
156
150
140
125
207
198
190
176
168
217
204
187
132
126
116
112
107
103
167
140
141
124
125
112
202
189
189
176
161
155
220
210
140
134
129
119
109
104
168
168
143
143
126
129
220
207
192
192
179
164
213
199
199
165
216
180
244
211
225
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
6N@
3301
8N@
2475
9N@
2201
19812
10N@
1981
11N@
1801
13N@
1524
7N@
3048
9N@
2371
10N@
2134
21336
11N@
1939
12N@
1777
14N@
1524
(mm)
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1321
1422
1524
1676
1829
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
1422
1524
1676
1829
1981
2134
18
33
31
34
33
36
37
36
34
36
57
45
39
37
42
43
46
46
43
40
40
49
48
49
45
45
55
55
52
51
51
36
34
36
36
37
36
39
37
46
48
48
49
40
45
43
45
45
46
48
45
46
48
43
45
51
49
48
48
45
45
54
55
52
51
49
49
22
42
37
36
36
37
46
45
42
42
58
48
48
48
48
45
54
54
51
51
49
58
58
57
55
54
67
64
61
61
61
37
39
40
37
39
40
46
45
51
49
51
51
51
54
52
51
49
49
61
58
57
55
52
54
61
58
55
55
54
54
65
64
62
60
58
60
27
45
43
43
39
40
57
51
49
49
58
57
58
57
55
52
61
60
60
58
55
67
65
65
62
61
82
79
74
73
68
45
45
45
43
42
43
55
52
57
55
54
52
57
61
62
57
55
54
67
65
64
62
60
58
74
68
67
62
62
60
79
80
71
73
65
65
31
49
49
48
46
46
60
58
58
52
58
65
62
60
61
57
73
68
65
64
65
77
76
73
68
70
95
91
86
79
79
52
49
48
48
46
46
60
58
64
64
58
57
67
71
65
64
60
60
76
74
68
71
70
67
83
82
71
71
71
67
94
91
82
82
77
76
36
58
52
51
49
48
65
64
61
62
62
73
71
70
65
65
86
77
76
74
70
88
89
82
80
76
107
103
95
92
86
58
55
52
51
51
52
67
67
71
67
67
67
79
82
76
70
68
70
89
85
79
82
74
73
94
86
82
82
76
76
106
103
95
91
86
86
127
89
124
119
113
109
101
171
156
147
132
132
190
176
162
153
135
195
196
182
168
164
228
214
199
186
176
116
171
144
146
129
129
210
195
193
182
168
228
214
216
202
189
125
173
174
147
149
132
228
213
198
185
186
217
205
192
208
210
243
213
219
214
244
232
257
164
156
155
140
134
126
180
165
158
152
143
140
195
189
185
173
168
195
176
176
196
189
171
167
198
193
180
204
198
196
177
176
173
202
185
185
220
208
192
210
214
207
193
177
168
171
213
201
183
176
220
210
190
225
214
225
205
205
189
210
213
231
235
204
205
131
126
112
113
106
103
164
156
158
149
138
140
176
182
162
158
143
146
205
192
174
162
164
152
98
141
125
122
116
113
189
176
161
150
137
192
193
179
167
161
229
214
199
186
189
232
219
207
195
240
210
152
134
129
116
116
107
182
170
167
161
152
141
204
193
183
167
161
162
107
144
144
137
124
119
192
192
177
164
155
211
211
196
185
171
231
253
152
152
138
132
124
119
190
192
182
170
164
153
231
217
205
208
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
8N@
2859
10N@
2286
22860 12N@
1905
14N@
1634
15N@
1524
8N@
3048
10N@
2438
24384
12N@
2033
14N@
1740
16N@
1524
(mm)
1422
1524
1676
1829
1981
1524
1676
1829
1981
2134
1524
1676
1829
1981
2134
1676
1829
1981
2134
2286
1676
1829
1981
2134
2286
1524
1676
1829
1981
2134
2286
1524
1676
1829
1981
2134
2286
1676
1829
1981
2134
2286
2438
1676
1829
1981
2134
2286
2438
1676
1829
1981
2134
2286
2438
18
43
39
40
39
40
48
48
45
46
46
57
52
54
52
51
61
61
55
57
55
61
62
61
58
57
42
45
43
45
45
79
46
46
49
48
49
51
54
51
49
51
54
51
58
57
54
54
54
55
62
61
61
58
58
60
22
49
48
48
48
43
58
55
54
52
54
64
62
61
62
58
71
68
65
65
62
77
77
70
68
68
46
46
48
46
48
80
52
52
55
54
55
54
65
62
58
57
58
55
70
68
64
62
61
60
79
74
73
67
68
68
27
60
57
52
51
51
62
62
62
58
58
76
74
68
70
68
83
77
79
77
74
89
88
80
82
77
55
52
49
49
52
83
61
58
64
62
62
60
74
70
68
70
65
64
85
80
74
74
71
70
92
85
86
80
80
82
31
64
62
61
61
55
74
73
67
68
67
88
82
80
80
77
94
91
91
85
86
103
100
97
94
89
62
57
57
55
55
83
70
68
74
68
67
65
85
80
79
73
74
74
95
88
86
83
79
79
104
103
98
91
92
86
36
73
71
65
64
64
88
82
80
71
73
101
92
94
91
83
107
104
101
95
98
115
110
109
100
103
67
67
61
61
58
85
79
77
82
76
76
73
97
88
89
83
83
80
109
100
98
95
91
91
116
113
109
103
104
101
128
89
173
173
147
149
132
195
196
183
170
164
98
190
176
176
150
153
229
199
202
189
190
107
208
193
179
180
156
116
226
211
196
182
183
205
207
195
226
213
220
210
207
207
229
226
210
243
244
254
225
228
214
254
257
262
251
254
217
153
153
137
131
124
134
192
171
179
167
162
152
259
263
167
156
158
140
143
141
207
196
189
182
171
165
198
192
180
173
174
189
168
161
162
146
153
125
228
214
199
186
232
204
192
173
165
167
156
195
187
176
170
176
193
186
176
195
196
202
202
205
186
179
208
213
193
222
219
232
222
213
202
189
217
216
226
231
231
244
211
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
9N@
3048
10N@
2743
11N@
2493
27432
12N@
2286
15N@
1829
18N@
1524
10N@
3048
12N@
2539
15N@
2033
30480 16N@
1905
17N@
1792
18N@
1695
20N@
1524
(mm)
1829
2134
2286
2438
2591
1829
2134
2286
2438
2591
1829
2134
2286
2438
2591
1981
2134
2286
2438
2743
1981
2134
2286
2438
2743
1981
2134
2286
2438
2743
1981
2134
2438
2591
2743
1981
2134
2438
2591
2743
1981
2134
2438
2591
2743
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
2134
2438
2591
2743
3048
18
60
61
80
82
82
62
62
62
64
64
64
64
67
70
71
65
67
68
68
67
70
73
74
71
76
76
76
77
79
85
67
70
82
82
83
71
71
70
71
71
79
79
77
79
79
79
79
79
80
83
82
80
82
82
83
82
82
83
85
88
86
89
88
89
101
22
62
65
82
83
85
68
67
68
68
67
70
73
71
71
73
73
73
74
71
73
80
80
77
79
85
92
91
86
86
88
73
74
83
83
85
79
77
76
77
76
83
83
83
83
83
86
85
85
86
91
91
88
88
89
92
91
89
91
89
95
98
97
97
100
109
27
68
71
83
85
85
71
73
74
71
71
76
74
76
79
85
79
77
77
77
82
98
92
89
86
88
110
109
104
101
95
77
79
83
85
86
83
82
82
82
82
100
91
91
89
88
103
94
92
92
95
104
97
98
97
100
104
97
98
101
103
115
109
106
106
134
31
73
71
83
85
86
77
76
76
79
79
88
82
79
83
86
89
83
89
86
83
112
101
103
98
95
125
119
118
116
113
82
82
85
86
88
92
94
86
86
88
112
103
101
98
97
107
106
98
100
104
115
107
109
103
106
121
107
109
109
112
140
124
119
119
150
36
82
74
85
86
88
91
86
83
83
85
97
92
88
89
91
101
97
101
94
95
122
113
116
107
107
147
132
134
129
126
86
86
92
91
91
104
101
98
92
92
128
116
107
110
109
119
112
110
113
113
131
119
118
116
116
140
125
125
122
125
153
147
132
132
161
129
89
177
180
156
159
156
211
204
187
168
171
98
210
185
186
164
167
231
220
192
192
185
205
192
196
185
116
125
220
205
195
198
222
211
199
210
198
195
228
204
231
223
211
199
205
220
223
243
222
225
196
201
226
228
204
232
238
250
257
250
256
195
176
186
180
159
208
198
187
189
189
198
193
195
198
183
210
207
222
222
240
250
107
213
201
190
190
193
213
ASD
GIRDER
JOIST
GIRDER
SPAN
SPACES
DEPTH
(mm)
(mm)
10N@
3353
12N@
2795
14N@
2396
33528
16N@
2097
18N@
1862
20N@
1676
10N@
3658
12N@
3048
15N@
2438
36576 16N@
2286
18N@
2033
20N@
1829
24N@
1524
(mm)
2134
2438
2743
2896
3048
2134
2438
2743
2896
3048
2134
2438
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
2438
2591
2743
2896
3048
18
80
92
94
94
95
86
85
86
88
88
89
89
89
91
89
92
94
95
97
98
95
98
98
100
101
101
103
103
103
98
94
95
116
116
118
101
101
103
104
104
103
104
104
104
107
104
104
104
104
104
106
107
107
107
109
113
112
112
115
115
124
121
124
128
128
22
86
92
94
95
95
92
92
95
97
92
98
97
95
97
98
101
100
101
104
103
106
104
106
109
110
115
112
115
115
107
98
100
118
118
121
103
103
104
104
106
110
109
109
109
110
113
110
110
109
112
115
116
118
113
115
122
124
121
122
125
134
131
135
143
144
27
91
94
95
100
98
98
98
101
98
100
106
103
103
103
103
107
110
109
110
112
115
119
115
118
118
122
121
124
128
115
103
103
122
122
124
106
107
107
106
107
115
116
119
116
116
119
116
119
121
118
126
124
125
126
125
132
129
131
129
134
143
147
143
162
159
31
97
97
100
101
103
104
104
107
106
107
113
110
107
110
110
118
119
121
119
121
129
132
124
126
131
147
140
140
135
124
107
106
124
124
125
115
116
112
112
113
122
125
126
124
125
126
128
126
128
126
132
129
131
134
132
140
137
140
138
143
165
161
153
180
174
36
103
103
103
107
107
110
110
112
112
110
125
124
116
118
119
132
132
124
128
131
147
150
140
144
135
158
162
158
150
138
113
112
124
124
125
122
119
121
122
119
134
131
134
131
132
134
137
134
135
134
141
144
140
143
141
164
156
150
153
152
180
176
177
210
213
130
89
214
98
107
195
198
190
198
202
204
208
235
232
235
235
240
238
192
195
190
198
205
204
116
125
131
132
SECTION 1.
GENERAL
1.1 SCOPE
The practices and customs set forth herein are in accordance with good engineering practice, tend to ensure safety
in steel joist and Joist Girder construction, and are standard
within the industry. There shall be no conflict between this
code and any legal building regulation. This code shall only
supplement and amplify such laws. Unless specific provisions to the contrary are made in a contract for the purchase
of steel joists or Joist Girders, this code is understood to
govern the interpretation of such a contract.
1.4 DESIGN
In the absence of ordinances or specifications to the contrary,
all designs prepared by the specifying professional shall be
in accordance with the Steel Joist Institute Standard
Specifications Load Tables & Weight Tables of latest adoption.
1.2 APPLICATION
This Code of Standard Practice is to govern as a standard
unless otherwise covered in the architects and engineers
plans and specifications.
1.3 DEFINITIONS
Material. Steel joists, Joist Girders, and accessories as provided by the seller.
SECTION 2.
JOISTS AND
ACCESSORIES
K-Series joists are furnished with parallel chords only, and with
minimum standard end bearing depth of 2 1/2 inches (64 mm).
LH- and DLH-Series joists are furnished either underslung
or square ended, with top chords either parallel, pitched one
way or pitched two ways. Underslung types are furnished
with standard end bearing depth of 5 inches (127 mm) for
133
TABLE 2.6-1a
K-SERIES JOISTS
MAXIMUM JOIST SPACING FOR HORIZONTAL BRIDGING
**BRIDGING MATERIAL SIZE
SECTION
NUMBER*
Round Rod
1/2" round
(13 mm)
r = 0.13"
(3.30 mm)
1 x 7/64
1-1/4 x 7/64
1-1/2 x 7/64
1-3/4 x 7/64
2 x 1/8
2-1/2 x 5/32
(25 mm x 3 mm) (32 mm x 3 mm) (38 mm x 3 mm) (45 mm x 3 mm) (52 mm x 3 mm) (64 mm x 4 mm)
r = 0.20"
r = 0.25"
r = 0.30"
r = 0.35"
r = 0.40"
r = 0.50"
(5.08 mm)
(6.35 mm)
(7.62 mm)
(8.89 mm)
(10.16 mm)
(12.70 mm)
19
3'- 3"
(991 mm)
5'- 0"
(1524 mm)
6'- 3"
(1905 mm)
7'- 6"
(2286 mm)
8'- 7"
(2616 mm)
10'- 0"
(3048 mm)
12'- 6"
(3810 mm)
10
3'- 0"
(914 mm)
4'- 8"
(1422 mm)
6'- 3"
(1905 mm)
7'- 6"
(2286 mm)
8'- 7"
(2616 mm)
10'- 0"
(3048 mm)
12'- 6"
(3810 mm)
1112
2'- 7"
(787 mm)
4'- 0"
(1219 mm)
5'- 8"
(1727 mm)
7'- 6"
(2286 mm)
8'- 7"
(2616 mm)
10'- 0"
(3048 mm)
12'- 6"
(3810 mm)
134
TABLE 2.6-1b
LH-SERIES JOISTS
MAXIMUM JOIST SPACING FOR HORIZONTAL BRIDGING
SPANS OVER 60 ft. (18.3 m) REQUIRE BOLTED DIAGONAL BRIDGING
**BRIDGING ANGLE SIZE (EQUAL LEG ANGLE)
SECTION
1 x 7/64
NUMBER* (25 mm x 3 mm)
r = 0.20"
(5.08 mm)
1-1/4 x 7/64
(32 mm x 3 mm)
r = 0.25"
(6.35 mm)
1-1/2 x 7/64
(38 mm x 3 mm)
r = 0.30"
(7.62 mm)
1-3/4 x 7/64
(45 mm x 3 mm)
r = 0.35"
(8.89 mm)
2 x 1/8
(52 mm x 3 mm)
r = 0.40"
(10.16 mm)
2-1/2 x 5/32
(64 mm x 4 mm)
r = 0.50"
(12.70 mm)
02, 03, 04
4' 7"
(1397 mm)
6' 3"
(1905 mm)
7' 6"
(2286 mm)
8' 9"
(2667 mm)
10' 0"
(3048 mm)
12' 4"
(3759 mm)
05 06
4' 1"
(1245 mm)
5' 9"
(1753 mm)
7' 6"
(2286 mm)
8' 9"
(2667 mm)
10' 0"
(3048 mm)
12' 4"
(3759 mm)
07 08
3' 9"
(1143 mm)
5' 1"
(1549 mm)
6' 8"
(2032 mm)
8' 6"
(2590 mm)
10' 0"
(3048 mm)
12' 4"
(3759 mm)
09 10
4' 6"
(1372 mm)
6' 0"
(1829 mm)
7' 8"
(2337 mm)
10' 0"
(3048 mm)
12' 4"
(3759 mm)
11 12
4' 1"
(1245 mm)
5' 5"
(1651 mm)
6' 10"
(2083 mm)
8' 11"
(2718 mm)
12' 4"
(3759 mm)
13 14
3' 9"
(1143 mm)
4' 11"
(1499 mm)
6' 3"
(1905 mm)
8' 2"
(2489 mm)
12' 4"
(3759 mm)
15 16
4' 3"
(1295 mm)
5' 5"
(1651 mm)
7' 1"
(2159 mm)
11' 0"
(3353 mm)
17
4' 0"
(1219 mm)
5' 1"
(1549 mm)
6' 8"
(2032 mm)
10' 5"
(3175 mm)
Horizontal bridging shall consist of continuous horizontal steel members. The l/r ratio for horizontal bridging
shall not exceed 300. The material sizes shown in
Tables 2.6-1a and 2.6-1b meet the criteria.
(b) For K- and LH-Series Joists horizontal bridging is recommended for spans up to and including 60 feet (18.3 m)
except where the Steel Joist Institute Standard
Specifications Load Tables & Weight Tables require bolted diagonal bridging for erection stability.
135
TABLE 2.6-2
K, LH AND DLH SERIES JOISTS
MAXIMUM JOIST SPACING FOR DIAGONAL BRIDGING
**BRIDGING ANGLE SIZE (EQUAL LEG ANGLE)
JOIST DEPTH
1 x 7/64
1-1/4 x 7/64
1-1/2 x 7/64
1-3/4 x 7/64
2 x 1/8
(25 mm x 3 mm)
(32 mm x 3 mm)
(38 mm x 3 mm)
(45 mm x 3 mm)
(50 mm x 3 mm)
r = 0.20" (5.08 mm) r = 0.25" (6.35 mm) r = 0.30" (7.62 mm) r = 0.35" (8.89 mm) r = 0.40" (10.16 mm)
12"
(305 mm)
14"
(356 mm)
16"
(406 mm)
18"
(457 mm)
20"
(508 mm)
22"
(559 mm)
24"
(610 mm)
9' 9"
(2971 mm)
26"
(660 mm)
9' 9"
(2971 mm)
28"
(711 mm)
9' 8"
(2946 mm)
30"
(762 mm)
9' 8"
(2946 mm)
32"
(813 mm)
9' 7"
(2921 mm)
36"
(3962 mm)
(914 mm)
9' 6"
(2895 mm)
9' 5"
(2870 mm)
9' 3"
(2819 mm)
(3886 mm)
9' 2"
(2794 mm)
(3860 mm)
9' 0"
(2743 mm)
(3835 mm)
(3784 mm)
8' 7"
(2616 mm)
(3759 mm)
8' 5"
(2565 mm)
(3708 mm)
8' 2"
(2489 mm)
(3657 mm)
8' 0"
(2438 mm)
ALL
3/8
2 - 12
3/8
13 - 17
1/2
18 and 19
5/8
*Refer to last digit(s) of Joist Designation
136
(10
(10
(13
(16
mm)
mm)
mm)
mm)
2.7 HEADERS
SECTION 4.
INSPECTION
Inspections shall be made in accordance with the Steel Joist
Institute Standard Specifications Load Tables & Weight
Tables Section 5.12 for K-Series, Section 104.13 for LHand DLH-Series, and Section 1004.10 for Joist Girders.
SECTION 5.
Bottom chord lateral bracing may be furnished to prevent lateral movement of the bottom chord of the Joist Girder and to
prevent the ratio of chord length to chord radius of gyration
from exceeding that specified in the Steel Joist Institute
Standard Specifications Load Tables & Weight Tables of latest
adoption. The lateral bracing shall be that which is standard
with the manufacturer, and shall be sufficient to properly brace
the bottom chord of the Joist Girder.
ESTIMATING
5.1 PLANS FOR BIDDING
Plans to serve as the basis for bids shall show the character
of the work with sufficient clarity to permit making an accurate estimate and shall show the following:
SECTION 3.
MATERIALS
3.1 STEEL
3.2 PAINT
Joist Girders.
Joist Substitutes.
Joist Extended Ends.
Ceiling Extensions.
137
The specifying professional shall give due consideration to the following loads and load effects:
Wood nailers.
Moment plates.
3. Wind.
Shear Studs.
SECTION 6.
PLANS AND
SPECIFICATIONS
(a) Loads -
The specifying professional shall use one of the following options that allows the:
- Estimator to price the joists.
- Joist manufacturer to design the joists properly.
- Owner to obtain the most economical joists.
Option 1: Select a Standard Steel Joist Institute joist
for the uniform design loading and provide the load and
location of any additional loads on the structural plan
with a note Joist manufacturer shall design joists for
additional loads as shown. This option works well for a
few added loads per joist with known locations.
138
LRFD EXAMPLE:
8'-0"
(2.44 m)
6'-0"
(1.83 m)
3'-0"
(0.91 m)
18"
(457 mm)
RL
30'-0" (9.14 m)
7'-0"
(2.13 m)
RR
18K SP
Joist manufacturer to design joist to support factored loads as shown.
(b) Connections -
CAUTION: The specifying professional shall compare the equivalent uniform loads derived from the maximum moment and shear to the uniform loads tabulated
in the K-Series Load Table. An equivalent unfactored
uniform load in excess of 550 plf (8020 N/m) or a maximum unfactored end reaction exceeding 9200 lbs (40.9
kN) indicates that the specifying professional shall
consider using additional joists to reduce the loading or
use an LH-Series Joist and make provisions for 5 inch
(127 mm) deep bearing seats.
Minimum End Anchorage for simple span gravity loading shall be in accordance with Steel Joist Institute
Standard Specifications Load Tables & Weight Tables
Section 5.6 for K-Series, Section 104.4 for LH- and
DLH-Series, and Section 1004.6 for Joist Girders. The
specifying professional is responsible for the design
of the joist and Joist Girder connection when it is subject to any loads other than simple span gravity loading
including uplift and lateral loads. The specifying professional is also responsible for bridging termination
connections. The contract documents must clearly illustrate these connections.
ASD EXAMPLE:
a) Profiles for non-standard joist and Joist Girder configurations (Standard joist and Joist Girder configurations
are as indicated in the Steel Joist Institute Standard
Specifications Load Tables & Weight Tables of latest
adoption).
c) Extended ends
D+S
500 lbs
(2.22 kN)
8'-0"
(2.44 m)
300 lbs
(1.33 kN)
6'-0"
(1.83 m)
160 lb/ft
(2.34 kN/m)
3'-0"
(0.91 m)
The Seller shall furnish the Buyer with steel joist placement
plans to show the Material as specified on the construction
documents and are to be utilized for field installation in accordance with specific project requirements as stated in Section
6.1. Steel placement plans shall include, at a minimum, the
following:
18"
(457 mm)
RL
30'-0" (9.14 m)
800 lbs
(3.56 kN)
7'-0"
(2.13 m)
RR
18K SP
Joist manufacturer to design joist to support loads as shown above.
139
shown on the plans used as the basis of the bid, the cost of
such changes and/or extra Material shall be paid by the Buyer
at a price to be agreed upon between Buyer and Seller.
2. Profiles for non-standard joist and Joist Girder configurations (Standard joist and Joist Girder configurations are as indicated in the Steel Joist Institute
Standard Specifications Load Tables & Weight
Tables of latest adoption).
6.6 CALCULATIONS
The seller shall design the steel joists and/or steel Joist
Girders in accordance with the current Steel Joist Institute
Standard Specifications Load Tables & Weight Tables to
support the load requirements of Section 6.1. The specifying professional may require submission of the steel joist
and Joist Girder calculations as prepared by a registered
design professional responsible for the product design. If
requested by the specifying professional, the steel joist
manufacturer shall submit design calculations with a cover
letter bearing the seal and signature of the joist manufacturers registered design professional. In addition to standard
calculations under this seal and signature, submittal of the
following shall be included:
6.3 DISCREPANCIES
b) Field splices
c) Joist headers
SECTION 7.*
HANDLING AND
ERECTION
6.4 APPROVAL
6.5 CHANGES
When any changes in plans are made by the buyer (or the
buyers representative) either prior to or after approval of
detailed plans, or when any Material is required and was not
140
SECTION 8.
BUSINESS RELATIONS
8.1 PRESENTATION OF PROPOSALS
All proposals for furnishing Material shall be made on a
Sales Contract Form. After acceptance by the Buyer, these
proposals must be approved or executed by a qualified official of the Seller. Upon such approval the proposal
becomes a contract.
8.3 BILLING
Contracts on a lump sum basis are to be billed proportionately as shipments are made.
8.4 PAYMENT
Payments shall be made in full on each invoice without
retention.
8.5 ARBITRATION
All business controversies which cannot be settled by direct
negotiations between Buyer and Seller shall be submitted to
arbitration. Both parties shall sign a submission to arbitration and if possible agree upon an arbitrator. If they are
unable to agree, each shall appoint an arbitrator and these
two shall appoint a third arbitrator. The expenses of the arbitration shall be divided equally between the parties, unless
otherwise provided for in the agreements to submit to arbitration. The arbitrators shall pass final judgment upon all
questions, both of law and fact, and their findings shall be
conclusive.
141
GLOSSARY
Buyer. The entity that has agreed to purchase material from
the manufacturer and has also agreed to the terms of sale.
NOTES:
Terms in Bold and their definitions come from the AISC AND
AISI STANDARD Standard Definitions for Use in the Design
of Steel Structures, 2004 Edition, First Printing April 2005.
ASD (Allowable Strength Design). Method of proportioning structural components such that the allowable strength
equals or exceeds the required strength of the component
under the action of the ASD load combinations.
ASD Load Combination. Load combination in the applicable building code intended for allowable strength design
(allowable stress design).
Bearing Plate. The steel plate used for a joist or Joist Girder
to bear on when it is supported by masonry or concrete supports. The plate is designed by the Specifying Professional
to carry the joist reaction to the supporting structure.
Diaphragm. Roof, floor or other membrane or bracing system that transfers in-plane forces to the lateral force resisting system.
Elastic Analysis. Structural analysis based on the assumption that the structure returns to its original geometry on
removal of the load.
142
GLOSSARY
LRFD Load Combination. Load combination in the applicable building code intended for strength design (Load and
Resistance Factor Design).
143
GLOSSARY
Span. The centerline-to-centerline distance between structural steel supports such as a beam, column or Joist Girder
or the clear span distance plus four inches onto a masonry
or concrete wall.
Stability. Condition reached in the loading of a structural component, frame or structure in which a slight disturbance in the
loads or geometry does not produce large displacements.
Quality Control. System of shop and field controls implemented by the seller and erector to ensure that contract and
company fabrication and erection requirements are met.
Required Strength*. Forces, stress, and deformations produced in a structural component, determined by either structural analysis, for the LRFD or ASD load combinations, as
appropriate, or as specified by these Standard Specifications.
Resistance Factor, . Factor that accounts for unavoidable
deviations of the nominal strength from the actual strength
and for the manner and consequences of failure.
Slenderness Ratio. The ratio of the effective length of a column to the radius of gyration of the column about the same
axis of bending.
144
GLOSSARY
145
146
LRFD
LRFD
4'- 0"
825
825
825
1219
12.03
12.03
12.03
5'-0"
825
338
561
189
405
116
306
76
825
465
778.5
260
562.5
160
426
105
825
1524
1828
12.03
6.78
11.36
3.79
8.21
2.33
6.21
1.53
12.03
825
354
810
218
612
143
12.03
4.93
8.18
2.75
5.91
1.69
4.46
1.10
6'-0"
7'-0"
8'-0"
2133
2438
12.03
5.16
11.82
3.18
8.93
2.08
ASD
ASD
4'-0"
550
550
550
1219
8.02
8.02
8.02
5'-0"
550
338
374
189
270
116
204
76
550
465
519
260
375
160
284
105
550
1524
1828
8.02
6.78
7.57
3.79
5.47
2.33
4.14
1.53
8.02
550
354
540
218
408
143
8.02
4.93
5.45
2.75
3.94
1.69
2.97
1.10
6'-0"
7'-0"
8'-0"
2133
2438
The figures shown in red are the uniform live loads which produce an
approximate deflection of 1/360 of the span.
A-1
8.02
5.16
7.88
3.18
5.95
2.08
A-2
Joist extensions are commonly furnished to support a variety of overhang conditions. The two types are pictured
below. The first is the TOP CHORD EXTENSION or S
TYPE, which has only the top chord angles extended. The
second is the EXTENDED END or R TYPE in which the
standard 2 1/2 in., (64 mm) end bearing depth is maintained
over the entire length of the extension. The S TYPE extension is so designated because of its Simple nature whereas
the R TYPE involves Reinforcing the top chord angles.
The specifying professional should be aware that an S
TYPE is more economical and should be specified whenever possible.
The following load tables for K-Series TOP CHORD EXTENSIONS and EXTENDED ENDS for LRFD and ASD methods
of design and listed in U.S. Customary and Metric units,
have been developed as an aid to the specifying professional. The black number in the tables is the maximum
allowable uniform load in pounds per linear foot
(kiloNewton/Meter). The red number is the uniform load
which will produce an approximate deflection of L1/240,
where L1 is the length of the extension. The load tables are
It should be noted that an R TYPE extension must be specified when building details dictate a 2 1/2 in., (64 mm) depth at
the end of the extension. In the absence of specific instructions, the joist manufacturer may provide either type.
EXTENDED END
SPAN
W
L1
(64 mm)
2"
SPAN
W
L1
(64 mm)
2"
W
= Uniform Load
L1
= Length of Extension
SPAN = See K-Series Load Table for definition of Span
B-1
LRFD
TOP CHORD EXTENSION LOAD TABLE (S TYPE)
Based on a Maximum Yield Strength of 50 ksi
Pounds per Linear Foot
TYPE
S1
"S"
(in.3 )
0.099
"I"
(in.4 )
0.088
S2
0.127
0.138
S3
0.144
0.156
S4
0.160
0.172
S5
0.176
0.188
S6
0.192
0.204
S7
0.241
0.306
S8
0.266
0.332
S9
0.288
0.358
S10
0.380
0.544
S11
0.438
0.622
S12
0.494
0.696
LENGTH (L1)
0'-6"
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
1'-0"
544
363
700
422
793
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
1'-6"
267
127
343
200
388
226
432
249
474
272
517
295
649
443
717
481
777
519
825
550
825
550
825
550
2'-0"
157
58
202
91
229
104
255
113
280
124
306
134
384
201
424
219
459
236
606
359
699
410
789
459
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
168
60
184
66
202
72
253
108
280
117
303
126
400
192
460
220
520
246
180
64
198
70
214
75
283
115
327
131
369
147
160
48
211
74
243
84
274
94
163
50
189
57
213
64
150
41
169
45
LRFD
TOP CHORD EXTENSION LOAD TABLE (R TYPE)
Based on a Maximum Yield Strength of 50 ksi
Pounds per Linear Foot
TYPE
R1
"S"
(in.3)
0.895
"I"
(in.4)
1.119
R2
0.923
1.157
R3
1.039
1.299
R4
1.147
1.433
R5
1.249
1.561
R6
1.352
1.690
R7
1.422
1.802
R8
1.558
1.948
R9
1.673
2.091
R10
1.931
2.414
R11
2.183
2.729
R12
2.413
3.016
0'-6"
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
1'-0"
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
1'-6"
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
2'-0"
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
2'-6"
825
396
825
409
825
459
825
507
825
550
825
550
825
550
825
550
825
550
825
550
825
550
825
550
B-2
LENGTH (L1)
3'-0"
3'-6"
669
498
236
152
690
514
244
157
777
579
274
176
825
639
302
195
825
696
329
212
825
753
357
230
825
792
380
245
825
825
411
265
825
825
442
284
825
825
510
328
825
825
550
371
825
825
550
410
4'-0"
385
103
399
107
448
120
495
132
538
144
583
156
613
167
672
180
721
194
825
224
825
253
825
279
4'-6"
307
73
318
76
358
85
394
94
429
103
465
111
489
119
535
128
576
138
664
159
751
180
825
199
5'-0"
250
54
259
56
292
63
321
69
349
75
379
82
399
87
436
94
469
101
541
117
612
132
676
146
5'-6"
208
41
216
42
243
47
267
52
291
57
315
62
331
66
363
71
390
77
450
89
508
100
562
111
6'-0"
175
32
181
33
205
37
225
41
246
44
265
48
279
51
306
55
328
59
379
69
430
78
475
86
ASD
TOP CHORD EXTENSION LOAD TABLE (S TYPE)
Based on a Maximum Yield Strength of 50 ksi
Pounds per Linear Foot
TYPE
S1
"S"
(in.3 )
0.099
"I"
(in.4 )
0.088
S2
0.127
0.138
S3
0.144
0.156
S4
0.160
0.172
S5
0.176
0.188
S6
0.192
0.204
S7
0.241
0.306
S8
0.266
0.332
S9
0.288
0.358
S10
0.380
0.544
S11
0.438
0.622
S12
0.494
0.696
0'-6"
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
1'-0"
363
363
467
422
529
510
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
1'-6"
178
127
229
200
259
226
288
249
316
272
345
295
433
433
478
481
518
518
550
550
550
550
550
550
2'-0"
105
58
135
91
153
104
170
113
187
124
204
134
256
201
283
219
306
236
404
359
466
410
526
459
LENGTH (L1)
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
112
60
123
66
135
72
169
108
187
117
202
126
267
192
307
220
347
246
120
64
132
70
143
75
189
115
218
131
246
147
107
48
141
74
162
84
183
94
109
50
126
57
142
64
100
41
113
45
ASD
TOP CHORD EXTENSION LOAD TABLE (R TYPE)
Based on a Maximum Yield Strength of 50 ksi
Pounds per Linear Foot
TYPE
R1
"S"
(in.3)
0.895
"I"
(in.4)
1.119
R2
0.923
1.157
R3
1.039
1.299
R4
1.147
1.433
R5
1.249
1.561
R6
1.352
1.690
R7
1.422
1.802
R8
1.558
1.948
R9
1.673
2.091
R10
1.931
2.414
R11
2.183
2.729
R12
2.413
3.016
0'-6"
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
1'-0"
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
1'-6"
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
2'-0"
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
2'-6"
550
396
550
409
550
459
550
507
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
B-3
LENGTH (L1)
3'-0"
3'-6"
446
332
236
152
460
343
244
157
518
386
274
176
550
426
302
195
550
464
329
212
550
502
357
230
550
528
380
245
550
550
411
265
550
550
442
284
550
550
510
328
550
550
550
371
550
550
550
410
4'-0"
257
103
266
107
299
120
330
132
359
144
389
156
409
167
448
180
481
194
550
224
550
253
550
279
4'-6"
205
73
212
76
239
85
263
94
286
103
310
111
326
119
357
128
384
138
443
159
501
180
550
199
5'-0"
167
54
173
56
195
63
214
69
233
75
253
82
266
87
291
94
313
101
361
117
408
132
451
146
5'-6"
139
41
144
42
162
47
178
52
194
57
210
62
221
66
242
71
260
77
300
89
339
100
375
111
6'-0"
117
32
121
33
137
37
150
41
164
44
177
48
186
51
204
55
219
59
253
69
287
78
317
86
LRFD
TOP CHORD EXTENSION LOAD TABLE (S TYPE)
Based on a Maximum Yield Strength of 345 MPa
KiloNewtons per Meter (kN/m)
"S"
(mm 3 )
1622
"I"
(mm 4 )
36628
S2
2081
57340
S3
2359
64932
S4
2622
71592
S5
2884
78251
S6
3146
84911
S7
3949
127367
S8
4359
138188
S9
4719
149010
S10
6227
226430
S11
7177
258895
S12
8095
289697
TYPE
S1
152
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
305
7.94
5.42
10.19
8.02
11.55
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
457
3.89
1.85
5.00
2.91
5.66
3.30
6.30
3.63
6.99
3.96
7.55
4.30
9.47
6.46
10.46
7.01
11.325
7.57
12.03
8.02
12.03
8.02
12.03
8.02
1067
1219
1372
2.34
0.70
3.075
1.07
3.54
1.22
4.005
1.37
2.385
0.72
2.745
0.83
3.105
0.93
2.175
0.59
2.46
0.65
LRFD
TOP CHORD EXTENSION LOAD TABLE (R TYPE)
Based on a Maximum Yield Strength of 345 MPa
KiloNewtons per Meter (kN/m)
TYPE
R1
"S"
(mm 3 )
14666
"I"
(mm 4 )
465762
R2
15174
R3
152
12.03
8.02
305
12.03
8.02
457
12.03
8.02
610
12.03
8.02
1372
4.49
1.06
1524
3.65
0.78
1676
3.03
0.59
1829
2.55
0.46
481579
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.96
10.10
3.56
7.53
2.29
5.82
1.56
4.64
1.10
3.78
0.81
3.15
0.61
2.66
0.48
17026
540684
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
6.69
11.34
3.99
8.45
2.56
6.54
1.75
5.21
1.24
4.25
0.91
3.53
0.68
2.97
0.53
R4
18796
596459
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
7.39
12.03
4.40
9.36
2.84
7.22
1.92
5.75
1.37
4.68
1.00
3.89
0.75
3.27
0.59
R5
20467
649763
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
4.80
10.16
3.09
7.85
2.10
6.26
1.50
5.10
1.09
4.25
0.83
3.59
0.64
R6
22155
703430
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.21
10.98
3.35
8.51
2.27
6.78
1.61
5.54
1.19
4.59
0.90
3.87
0.70
R7
23300
750048
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.54
11.55
3.57
8.94
2.43
7.13
1.73
5.82
1.26
4.83
0.96
4.07
0.74
R8
25531
810818
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.99
12.03
3.86
9.80
2.62
7.82
1.86
6.36
1.37
5.30
1.03
4.46
0.80
R9
27415
870339
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
6.45
12.03
4.14
10.52
2.83
8.40
2.01
6.84
1.47
5.69
1.12
4.79
0.86
R10
31643
1E+06
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
7.44
12.03
4.76
12.03
3.26
9.69
2.32
7.89
1.70
6.56
1.29
5.54
1.00
R11
35773
1E+06
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.41
12.03
3.69
10.97
2.62
8.93
1.92
7.41
1.45
6.27
1.13
R12
39542
1E+06
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
8.02
12.03
5.98
12.03
4.07
12.03
2.90
9.87
2.13
8.21
1.61
6.93
1.25
B-4
ASD
TOP CHORD EXTENSION LOAD TABLE (S TYPE)
Based on a Maximum Yield Strength of 345 MPa
KiloNewtons per Meter (kN/m)
"S"
(mm 3 )
1622
"I"
(mm 4 )
36628
S2
2081
57340
S3
2359
64932
S4
2622
71592
S5
2884
78251
S6
3146
84911
S7
3949
127367
S8
4359
138188
S9
4719
149010
S10
6227
226430
S11
7177
258895
S12
8095
289697
TYPE
S1
152
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
305
5.29
5.42
6.79
8.02
7.70
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
457
2.59
1.85
3.33
2.91
3.77
3.30
4.20
3.63
4.61
3.96
5.03
4.30
6.31
6.46
6.97
7.01
7.55
7.57
8.02
8.02
8.02
8.02
8.02
8.02
1219
1372
1.59
0.72
1.83
0.83
2.07
0.93
1.45
0.59
1.64
0.65
ASD
TOP CHORD EXTENSION LOAD TABLE (R TYPE)
Based on a Maximum Yield Strength of 345 MPa
KiloNewtons per Meter (kN/m)
152
8.02
8.02
305
8.02
8.02
457
8.02
8.02
610
8.02
8.02
1372
2.99
1.06
1524
2.43
0.78
1676
2.02
0.59
1829
1.70
0.46
481579
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.96
6.73
3.56
5.02
2.29
3.88
1.56
3.09
1.10
2.52
0.81
2.10
0.61
1.77
0.48
17026
540684
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
6.69
7.56
3.99
5.63
2.56
4.36
1.75
3.47
1.24
2.83
0.91
2.35
0.68
1.98
0.53
R4
18796
596459
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
7.39
8.02
4.40
6.24
2.84
4.81
1.92
3.83
1.37
3.12
1.00
2.59
0.75
2.18
0.59
R5
20467
649763
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
4.80
6.77
3.09
5.23
2.10
4.17
1.50
3.40
1.09
2.83
0.83
2.39
0.64
R6
22155
703430
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.21
7.32
3.35
5.67
2.27
4.52
1.61
3.69
1.19
3.06
0.90
2.58
0.70
R7
23300
750048
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.54
7.70
3.57
5.96
2.43
4.75
1.73
3.88
1.26
3.22
0.96
2.71
0.74
R8
25531
810818
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.99
8.02
3.86
6.53
2.62
5.21
1.86
4.24
1.37
3.53
1.03
2.97
0.80
R9
27415
870339
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
6.45
8.02
4.14
7.01
2.83
5.60
2.01
4.56
1.47
3.79
1.12
3.19
0.86
R10
31643
1004782
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
7.44
8.02
4.78
8.02
3.26
6.46
2.32
5.26
1.70
4.37
1.29
3.69
1.00
R11
35773
1135894
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.41
8.02
3.69
7.31
2.62
5.95
1.92
4.94
1.45
4.18
1.13
R12
39542
1255353
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
8.02
5.98
8.02
4.07
8.02
2.90
6.58
2.13
5.47
1.61
4.62
1.25
TYPE
R1
"S"
(mm 3 )
14666
"I"
(mm 4 )
465762
R2
15174
R3
B-5
B-6
LRFD EXAMPLE:
Floor joists @ 2'-6" on center, supporting a structural concrete slab. (Section 5.9 of the K-Series Specifications limits
the deflection due to the design live load to 1/360 of the
span).
Span = 30'- 0"
To utilize these tables, determine the span (ft) and load (plf)
required; go to the required span in the left hand column,
then read across until a load equal to or greater than the
required load is reached. The first joist that satisfies this
loading is the most economical joist for those conditions. If
this joist is too deep or too shallow, or does not satisfy the
deflection limitations, continue on horizontally to the right
until a joist is found that satisfies the depth requirements as
well as the load and deflection requirements.
ASD EXAMPLE:
Floor joists @ 2'-6" on center, supporting a structural concrete slab. (Section 5.9 of the K-Series Specifications limits
the deflection due to the design live load to 1/360 of the
span).
C-1
LRFD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
10K1
12K1
8K1
14K1
10
5.0
12
5.0
8
5.1
14
5.2
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
825
550
825
542
825
455
718
363
618
289
537
234
469
192
415
159
369
134
331
113
298
97
825
550
825
510
750
425
651
344
570
282
504
234
448
197
402
167
361
142
327
123
298
106
271
93
249
81
825
550
825
550
825
480
798
377
666
288
565
225
486
179
421
145
369
119
825
550
766
475
672
390
592
324
528
272
472
230
426
197
385
170
351
147
321
128
294
113
270
100
249
88
231
79
214
70
16K2
12K3
14K3
16K3
18K3
14K4
20K3
16K4
12K5
16
5.5
12
5.7
14
6.0
16
6.3
18
6.6
14
6.7
20
6.7
16
7.0
12
7.1
825
550
768
488
684
409
612
347
552
297
499
255
454
222
415
194
381
170
351
150
324
133
300
119
279
106
259
95
241
86
226
78
213
71
825
550
825
510
825
463
814
428
714
351
630
291
561
245
502
207
453
177
409
153
373
132
340
116
312
101
825
550
825
507
825
467
742
404
661
339
592
287
534
246
483
212
439
184
402
160
367
141
339
124
313
110
289
98
270
88
825
550
825
526
762
456
682
386
615
330
556
285
505
247
462
216
424
189
390
167
360
148
334
132
310
118
289
106
270
96
252
87
237
79
33
34
35
36
37
38
39
40
C-2
825
550
771
494
694
423
630
364
573
316
523
276
480
242
441
214
408
190
378
169
351
151
327
136
304
123
285
111
267
101
252
92
237
84
223
77
211
70
825
550
825
507
825
467
825
443
795
397
712
336
642
287
582
248
529
215
483
188
442
165
408
145
376
129
349
115
324
103
775
517
702
453
639
393
583
344
535
302
493
266
456
236
421
211
391
189
243
170
227
153
212
138
199
126
187
114
176
105
166
96
157
88
148
81
141
74
133
69
127
64
825
550
825
526
825
490
820
452
739
386
670
333
609
289
556
252
510
221
469
195
433
173
402
155
373
138
232
124
216
112
203
101
190
92
825
550
825
510
825
463
825
434
825
396
825
366
760
317
681
269
613
230
555
198
505
172
462
150
423
132
18K4
16K5
20K4
18
7.2
16
7.5
20
7.6
825
550
825
523
825
490
759
426
690
370
630
323
577
284
532
250
492
222
454
198
423
177
394
159
367
144
343
130
322
118
303
108
285
98
268
90
253
82
550
550
550
526
825
490
825
455
825
426
754
373
687
323
627
282
576
248
529
219
489
194
453
173
421
155
391
139
366
126
342
114
321
103
825
550
825
520
771
461
703
402
645
353
594
312
549
277
508
247
472
221
439
199
411
179
384
162
360
147
339
134
318
122
300
112
283
103
268
95
255
87
241
81
229
75
LRFD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
14K6
14
7.7
825
550
825
507
825
467
825
443
825
408
825
383
787
347
712
299
648
259
592
226
543
199
501
175
462
156
427
139
397
124
18K5
22K4
16K6
20K5
24K4
18K6
16K7
22K5
20K6
18K7
22K6
20K7
24K5
22K7
24K6
18
7.7
22
8.0
16
8.1
20
8.2
24
8.4
18
8.5
16
8.6
22
8.8
20
8.9
18
9.0
22
9.2
20
9.3
24
9.3
22
9.7
24
9.7
825
550
825
523
825
490
825
460
777
414
709
362
651
318
600
281
553
249
513
222
477
199
444
179
414
161
387
146
363
132
342
121
321
110
303
101
286
92
825
548
777
491
712
431
657
381
606
338
561
301
522
270
486
242
453
219
424
198
397
180
373
164
352
149
331
137
313
126
297
116
280
107
267
98
253
91
241
85
229
79
219
73
208
68
825
550
825
526
825
490
825
455
825
426
822
405
747
351
682
307
627
269
576
238
532
211
493
188
459
168
427
151
399
137
373
124
349
112
825
550
825
520
825
490
793
451
727
396
669
350
618
310
573
277
532
248
495
223
462
201
433
182
406
165
254
150
358
137
339
126
319
115
303
106
286
98
271
90
258
84
780
516
718
456
663
405
615
361
571
323
531
290
496
262
465
237
435
215
273
196
257
179
363
164
343
150
324
138
307
128
292
118
277
109
264
101
252
94
240
88
229
82
219
76
208
71
199
67
192
63
825
550
825
523
825
490
825
460
825
438
774
393
709
345
652
305
603
271
558
241
519
216
483
194
451
175
421
158
396
144
248
131
233
120
330
110
312
101
825
550
825
526
825
490
825
455
825
426
825
406
825
385
760
339
697
298
642
263
592
233
549
208
510
186
475
167
444
151
415
137
388
124
C-3
825
548
825
518
804
483
739
427
682
379
633
337
588
302
547
272
511
245
478
222
448
201
421
183
397
167
373
153
354
141
334
130
316
119
300
110
285
102
271
95
259
88
247
82
235
76
825
550
825
520
825
490
825
468
792
430
729
380
673
337
624
301
579
269
540
242
504
218
471
198
442
179
415
163
391
149
369
137
348
125
330
115
312
106
297
98
282
91
825
550
825
523
825
490
825
460
825
438
825
418
789
382
727
337
672
299
622
267
577
239
538
215
502
194
469
175
441
159
414
145
390
132
367
121
348
111
825
548
825
518
825
495
805
464
744
411
688
367
640
328
597
295
556
266
520
241
489
219
459
199
432
182
408
167
385
153
364
141
345
130
327
120
310
111
295
103
282
96
268
89
256
83
825
550
825
520
825
490
825
468
825
448
811
421
750
373
694
333
645
298
601
268
561
242
525
219
492
199
463
181
435
165
411
151
388
139
367
128
348
118
330
109
313
101
825
544
810
511
748
453
693
404
643
362
600
325
559
293
523
266
490
241
462
220
435
201
409
184
387
169
366
155
346
143
328
132
312
122
297
114
283
106
270
98
258
92
246
86
235
80
225
75
216
70
825
548
825
518
825
495
825
474
825
454
768
406
712
364
664
327
619
295
580
267
544
242
511
221
481
202
454
185
429
169
406
156
384
144
364
133
346
123
330
114
313
106
300
99
286
92
825
544
825
520
814
493
754
439
700
393
652
354
609
319
570
289
535
262
502
239
472
218
445
200
421
183
399
169
378
156
358
144
340
133
324
124
309
115
294
107
280
100
268
93
256
87
246
82
235
77
LRFD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt
(lbs/ft.)
26K5
16K9
24K7
18K9
26K6
20K9
26K7
22K9
28K6
24K8
18K10
28K7
24K9
26K8
20K10
26
16
24
18
26
20
26
22
28
24
18
28
24
26
20
26K9
26
9.8
10
10.1
10.2
10.6
10.8
10.9
11.3
11.4
11.5
11.7
11.8
12
12.1
12.2
12.2
Span (ft.)
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
813
535
753
477
699
427
651
384
607
346
568
314
534
285
501
259
472
237
445
217
420
199
397
183
376
169
357
156
340
145
322
134
307
125
294
116
280
108
268
101
256
95
246
89
235
83
225
78
216
73
208
69
199
65
825
550
825
526
825
490
825
455
825
426
825
406
825
385
825
363
825
346
771
311
711
276
658
246
612
220
570
198
532
178
498
161
466
147
825
544
825
520
825
499
825
479
781
436
727
392
679
353
636
320
595
290
559
265
526
242
496
221
469
203
444
187
421
172
399
159
379
148
361
137
343
127
328
118
313
110
298
103
286
97
274
90
262
85
825
550
825
523
825
490
825
460
825
438
825
418
825
396
825
377
807
354
747
315
694
282
646
254
603
229
564
207
529
188
498
171
468
156
441
143
417
132
825
541
820
519
762
464
709
417
661
377
619
341
580
309
546
282
514
257
484
236
457
216
433
199
411
184
390
170
370
157
352
146
336
136
319
126
306
118
291
110
279
103
267
96
256
90
246
85
235
80
226
75
217
71
825
550
825
520
825
490
825
468
825
448
825
426
825
405
825
389
775
353
723
317
675
286
631
259
592
235
556
214
523
195
493
179
466
164
441
151
418
139
397
129
376
119
825
541
825
522
825
501
790
463
738
417
690
378
648
343
609
312
573
285
540
261
510
240
483
221
457
204
433
188
412
174
393
162
373
150
357
140
340
131
325
122
310
114
298
107
285
100
274
94
262
89
252
83
243
79
825
548
825
518
825
495
825
474
825
454
825
432
825
413
798
387
745
349
697
316
654
287
615
261
579
239
546
219
516
201
487
185
462
170
438
157
417
146
396
135
378
126
360
117
343
109
53
54
55
56
C-4
822
541
766
486
715
439
669
397
627
361
589
329
555
300
523
275
495
252
468
232
444
214
420
198
399
183
379
170
361
158
345
147
330
137
315
128
301
120
288
112
276
105
265
99
255
93
244
88
235
83
226
78
217
74
210
70
202
66
825
544
825
520
825
499
825
479
825
456
804
429
750
387
702
350
658
318
619
289
582
264
549
242
519
222
490
205
465
189
441
174
420
161
399
150
379
139
363
130
346
121
330
113
316
106
303
99
291
93
825
550
825
523
825
490
825
460
825
438
825
418
825
396
825
377
825
361
825
347
822
331
766
298
715
269
669
243
627
221
589
201
555
184
523
168
495
154
825
543
825
522
796
486
745
440
699
400
657
364
618
333
583
305
550
280
522
257
493
237
469
219
445
203
424
189
403
175
385
163
367
152
351
142
336
133
321
125
309
117
295
110
283
103
273
97
262
92
252
87
243
82
234
77
226
73
825
544
825
520
825
499
825
479
825
456
825
436
816
419
765
379
717
344
673
313
634
286
598
262
565
241
534
222
507
204
480
189
456
175
435
162
414
151
394
140
376
131
360
122
345
114
330
107
316
101
825
541
825
522
825
501
825
479
816
457
763
413
715
375
672
342
633
312
597
286
564
263
534
242
505
223
480
206
456
191
433
177
412
164
394
153
376
143
360
133
343
125
328
117
315
110
303
103
291
97
279
91
268
86
825
550
825
520
825
490
825
468
825
448
825
426
825
405
825
389
825
375
825
359
799
336
748
304
702
276
660
251
621
229
585
210
553
193
523
178
496
164
471
151
447
140
825
541
825
522
825
501
825
479
825
459
825
444
778
407
732
370
688
338
649
310
613
284
580
262
550
241
522
223
496
207
472
192
450
178
429
166
409
155
391
145
375
135
358
127
343
119
330
112
316
105
304
99
292
93
LRFD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
30K7
22K10
28K8
28K9
24K10
30K8
30K9
22K11
26K10
28K10
30K10
24K12
30K11
26K12
28K12
30K12
30
12.3
22
12.6
28
12.7
28
13
24
13.1
30
13.2
30
13.4
22
13.8
26
13.8
28
14.3
30
15
24
16
30
16.4
26
16.6
28
17.1
30
17.6
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
825
543
801
508
751
461
706
420
664
384
627
351
592
323
559
297
531
274
504
253
478
234
454
217
433
202
414
188
394
176
376
164
361
153
345
144
331
135
318
127
304
119
292
112
282
106
271
100
261
94
252
89
243
84
234
80
226
76
219
72
211
69
825
548
825
518
825
495
825
474
825
454
825
432
825
413
825
399
825
385
825
369
775
337
729
307
687
280
648
257
612
236
579
217
549
200
520
185
495
171
471
159
448
148
427
138
408
128
825
543
825
522
825
500
825
480
772
438
726
399
684
364
645
333
609
306
576
282
546
260
519
240
492
222
468
206
445
192
426
179
406
167
388
156
372
146
355
136
340
128
327
120
313
113
301
106
289
100
279
95
268
89
259
85
249
80
825
543
825
522
825
500
825
480
823
463
790
432
744
395
702
361
663
332
627
305
594
282
564
260
535
241
510
224
486
208
463
194
442
181
423
169
405
158
387
148
370
139
355
130
342
123
328
115
315
109
304
103
292
97
282
92
271
87
825
544
825
520
825
499
825
479
825
456
825
436
825
422
825
410
823
393
798
368
753
337
709
308
670
283
634
260
601
240
570
222
541
206
516
191
490
177
468
165
447
154
427
144
408
135
391
126
375
118
825
543
825
520
823
500
780
460
735
420
693
384
654
353
619
325
586
300
556
277
529
256
502
238
480
221
457
206
436
192
417
179
399
168
382
157
366
148
351
139
337
130
324
123
312
116
300
109
288
103
277
98
268
92
259
88
250
83
241
79
234
75
825
543
825
520
823
500
798
468
774
441
751
415
712
383
673
352
639
325
606
300
576
278
547
258
522
240
498
223
475
208
454
195
435
182
415
171
399
160
382
150
367
141
352
133
339
126
327
119
313
112
303
106
292
100
282
95
271
90
262
86
253
81
825
548
825
518
825
495
825
474
825
454
825
432
825
413
825
399
825
385
825
369
823
355
798
334
774
314
741
292
700
269
663
247
628
228
595
211
565
195
538
181
513
168
489
157
466
146
C-5
825
541
825
522
825
501
825
479
825
459
825
444
823
431
798
404
774
378
751
356
729
334
690
308
654
284
619
262
589
243
561
225
534
210
508
195
486
182
465
170
444
159
426
149
408
140
391
131
375
124
361
116
346
110
825
543
825
522
825
500
825
480
823
463
798
435
774
410
751
389
730
366
711
344
691
325
670
306
636
284
606
263
576
245
550
228
525
212
501
198
480
186
459
174
441
163
423
153
405
144
390
136
375
128
360
121
348
114
334
108
322
102
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
619
282
591
263
564
245
538
229
516
214
493
201
472
188
454
177
436
166
418
157
402
148
387
140
373
132
360
125
346
118
334
112
322
106
312
101
301
96
825
544
825
520
825
499
825
479
825
456
825
436
825
422
825
410
823
393
798
368
774
344
751
324
730
306
711
290
691
275
673
261
657
247
640
235
625
224
609
213
580
199
555
185
531
174
508
163
487
153
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
625
284
610
270
597
258
583
246
570
236
558
226
543
215
520
202
499
190
480
179
462
169
444
159
427
150
412
142
397
135
384
128
370
121
358
115
346
109
825
541
825
522
825
501
825
479
825
459
825
444
823
431
798
404
774
378
751
356
730
334
711
315
691
299
673
283
657
269
640
256
625
244
610
232
597
222
583
212
570
203
553
192
529
180
508
169
487
159
469
150
451
142
825
543
825
522
825
500
825
480
823
463
798
435
774
410
751
389
730
366
711
344
691
325
673
308
657
291
640
277
625
264
610
252
597
240
583
229
570
219
558
210
547
201
535
193
525
185
507
175
487
165
469
156
451
147
435
139
420
132
825
543
825
520
823
500
798
468
774
441
751
415
730
392
711
374
691
353
673
333
657
315
640
300
625
284
610
270
597
258
583
246
570
236
558
226
547
216
535
207
525
199
514
192
504
184
495
177
486
170
468
161
451
153
435
145
420
137
406
130
393
124
ASD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
10K1
12K1
8K1
14K1
16K2
12K3
14K3
16K3
18K3
14K4
20K3
16K4
12K5
18K4
16K5
10
12
14
16
12
14
16
18
14
20
16
12
18
16
20
5.0
5.0
5.1
5.2
5.5
5.7
6.0
6.3
6.6
6.7
6.7
7.0
7.1
7.2
7.5
7.6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
550
550
550
542
550
455
479
363
412
289
358
234
313
192
277
159
246
134
221
113
199
97
550
550
550
510
500
425
434
344
380
282
336
234
299
197
268
167
241
142
218
123
199
106
181
93
166
81
550
550
550
550
550
480
532
377
444
288
377
225
324
179
281
145
246
119
550
550
511
475
448
390
395
324
352
272
315
230
284
197
257
170
234
147
214
128
196
113
180
100
166
88
154
79
143
70
550
550
512
488
456
409
408
347
368
297
333
255
303
222
277
194
254
170
234
150
216
133
200
119
186
106
173
95
161
86
151
78
142
71
550
550
550
510
550
463
543
428
476
351
420
291
374
245
335
207
302
177
273
153
249
132
227
116
208
101
550
550
550
507
550
467
495
404
441
339
395
287
356
246
322
212
293
184
268
160
245
141
226
124
209
110
193
98
180
88
550
550
550
526
508
456
455
386
410
330
371
285
337
247
308
216
283
189
260
167
240
148
223
132
207
118
193
106
180
96
168
87
158
79
33
34
35
36
37
38
39
40
C-6
550
550
514
494
463
423
420
364
382
316
349
276
320
242
294
214
272
190
252
169
234
151
218
136
203
123
190
111
178
101
168
92
158
84
149
77
141
70
550
550
550
507
550
467
550
443
530
397
475
336
428
287
388
248
353
215
322
188
295
165
272
145
251
129
233
115
216
103
517
517
468
453
426
393
389
344
357
302
329
266
304
236
281
211
261
189
243
170
227
153
212
138
199
126
187
114
176
105
166
96
157
88
148
81
141
74
133
69
127
64
550
550
550
526
550
490
547
452
493
386
447
333
406
289
371
252
340
221
313
195
289
173
268
155
249
138
232
124
216
112
203
101
190
92
550
550
550
510
550
463
550
434
550
396
550
366
507
317
454
269
409
230
370
198
337
172
308
150
282
132
550
550
550
523
550
490
506
426
460
370
420
323
385
284
355
250
328
222
303
198
282
177
263
159
245
144
229
130
215
118
202
108
190
98
179
90
169
82
550
550
550
526
550
490
550
455
550
426
503
373
458
323
418
282
384
248
353
219
326
194
302
173
281
155
261
139
244
126
228
114
214
103
20K4
550
550
550
520
514
461
469
402
430
353
396
312
366
277
339
247
315
221
293
199
274
179
256
162
240
147
226
134
212
122
200
112
189
103
179
95
170
87
161
81
153
75
ASD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
14K6
18K5
22K4
16K6
20K5
24K4
18K6
16K7
22K5
20K6
18K7
22K6
20K7
24K5
22K7
14
18
22
16
20
24
18
16
22
20
18
22
20
24
22
24
7.7
7.7
8.0
8.1
8.2
8.4
8.5
8.6
8.8
8.9
9.0
9.2
9.3
9.3
9.7
9.7
550
550
550
507
550
467
550
443
550
408
550
383
525
347
475
299
432
259
395
226
362
199
334
175
308
156
285
139
265
124
550
550
550
523
550
490
550
460
518
414
473
362
434
318
400
281
369
249
342
222
318
199
296
179
276
161
258
146
242
132
228
121
214
110
202
101
191
92
550
548
518
491
475
431
438
381
404
338
374
301
348
270
324
242
302
219
283
198
265
180
249
164
235
149
221
137
209
126
198
116
187
107
178
98
169
91
161
85
153
79
146
73
139
68
550
550
550
526
550
490
550
455
550
426
548
405
498
351
455
307
418
269
384
238
355
211
329
188
306
168
285
151
266
137
249
124
233
112
550
550
550
520
550
490
529
451
485
396
446
350
412
310
382
277
355
248
330
223
308
201
289
182
271
165
254
150
239
137
226
126
213
115
202
106
191
98
181
90
172
84
520
516
479
456
442
405
410
361
381
323
354
290
331
262
310
237
290
215
273
196
257
179
242
164
229
150
216
138
205
128
195
118
185
109
176
101
168
94
160
88
153
82
146
76
139
71
133
67
128
63
550
550
550
523
550
490
550
460
550
438
516
393
473
345
435
305
402
271
372
241
346
216
322
194
301
175
281
158
264
144
248
131
233
120
220
110
208
101
550
550
550
526
550
490
550
455
550
426
550
406
550
385
507
339
465
298
428
263
395
233
366
208
340
186
317
167
296
151
277
137
259
124
C-7
550
548
550
518
536
483
493
427
455
379
422
337
392
302
365
272
341
245
319
222
299
201
281
183
265
167
249
153
236
141
223
130
211
119
200
110
190
102
181
95
173
88
165
82
157
76
550
550
550
520
550
490
550
468
528
430
486
380
449
337
416
301
386
269
360
242
336
218
314
198
295
179
277
163
261
149
246
137
232
125
220
115
208
106
198
98
188
91
550
550
550
523
550
490
550
460
550
438
550
418
526
382
485
337
448
299
415
267
385
239
359
215
335
194
313
175
294
159
276
145
260
132
245
121
232
111
550
548
550
518
550
495
537
464
496
411
459
367
427
328
398
295
371
266
347
241
326
219
306
199
288
182
272
167
257
153
243
141
230
130
218
120
207
111
197
103
188
96
179
89
171
83
550
550
550
520
550
490
550
468
550
448
541
421
500
373
463
333
430
298
401
268
374
242
350
219
328
199
309
181
290
165
274
151
259
139
245
128
232
118
220
109
209
101
550
544
540
511
499
453
462
404
429
362
400
325
373
293
349
266
327
241
308
220
290
201
273
184
258
169
244
155
231
143
219
132
208
122
198
114
189
106
180
98
172
92
164
86
157
80
150
75
144
70
550
548
550
518
550
495
550
474
550
454
512
406
475
364
443
327
413
295
387
267
363
242
341
221
321
202
303
185
286
169
271
156
256
144
243
133
231
123
220
114
209
106
200
99
191
92
24K6
550
544
550
520
543
493
503
439
467
393
435
354
406
319
380
289
357
262
335
239
315
218
297
200
281
183
266
169
252
156
239
144
227
133
216
124
206
115
196
107
187
100
179
93
171
87
164
82
157
77
ASD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt
(lbs/ft.)
Span (ft.)
26K5
16K9
24K7
18K9
26K6
20K9
26K7
22K9
28K6
24K8
18K10
28K7
24K9
26K8
20K10
26
16
24
18
26
20
26
22
28
24
18
28
24
26
20
26
9.8
10
10.1
10.2
10.6
10.8
10.9
11.3
11.4
11.5
11.7
11.8
12
12.1
12.2
12.2
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
542
535
502
477
466
427
434
384
405
346
379
314
356
285
334
259
315
237
297
217
280
199
265
183
251
169
238
156
227
145
215
134
205
125
196
116
187
108
179
101
171
95
164
89
157
83
150
78
144
73
139
69
133
65
550
550
550
526
550
490
550
455
550
426
550
406
550
385
550
363
550
346
514
311
474
276
439
246
408
220
380
198
355
178
332
161
311
147
550
544
550
520
550
499
550
479
521
436
485
392
453
353
424
320
397
290
373
265
351
242
331
221
313
203
296
187
281
172
266
159
253
148
241
137
229
127
219
118
209
110
199
103
191
97
183
90
175
85
550
550
550
523
550
490
550
460
550
438
550
418
550
396
550
377
538
354
498
315
463
282
431
254
402
229
376
207
353
188
332
171
312
156
294
143
278
132
550
541
547
519
508
464
473
417
441
377
413
341
387
309
364
282
343
257
323
236
305
216
289
199
274
184
260
170
247
157
235
146
224
136
213
126
204
118
194
110
186
103
178
96
171
90
164
85
157
80
151
75
145
71
550
550
550
520
550
490
550
468
550
448
550
426
550
405
550
389
517
353
482
317
450
286
421
259
395
235
371
214
349
195
329
179
311
164
294
151
279
139
265
129
251
119
550
541
550
522
550
501
527
463
492
417
460
378
432
343
406
312
382
285
360
261
340
240
322
221
305
204
289
188
275
174
262
162
249
150
238
140
227
131
217
122
207
114
199
107
190
100
183
94
175
89
168
83
162
79
550
548
550
518
550
495
550
474
550
454
550
432
550
413
532
387
497
349
465
316
436
287
410
261
386
239
364
219
344
201
325
185
308
170
292
157
278
146
264
135
252
126
240
117
229
109
53
54
55
56
C-8
548
541
511
486
477
439
446
397
418
361
393
329
370
300
349
275
330
252
312
232
296
214
280
198
266
183
253
170
241
158
230
147
220
137
210
128
201
120
192
112
184
105
177
99
170
93
163
88
157
83
151
78
145
74
140
70
135
66
550
544
550
520
550
499
550
479
550
456
536
429
500
387
468
350
439
318
413
289
388
264
366
242
346
222
327
205
310
189
294
174
280
161
266
150
253
139
242
130
231
121
220
113
211
106
202
99
194
93
550
550
550
523
550
490
550
460
550
438
550
418
550
396
550
377
550
361
550
347
548
331
511
298
477
269
446
243
418
221
393
201
370
184
349
168
330
154
550
543
550
522
531
486
497
440
466
400
438
364
412
333
389
305
367
280
348
257
329
237
313
219
297
203
283
189
269
175
257
163
245
152
234
142
224
133
214
125
206
117
197
110
189
103
182
97
175
92
168
87
162
82
156
77
151
73
550
544
550
520
550
499
550
479
550
456
550
436
544
419
510
379
478
344
449
313
423
286
399
262
377
241
356
222
338
204
320
189
304
175
290
162
276
151
263
140
251
131
240
122
230
114
220
107
211
101
550
541
550
522
550
501
550
479
544
457
509
413
477
375
448
342
422
312
398
286
376
263
356
242
337
223
320
206
304
191
289
177
275
164
263
153
251
143
240
133
229
125
219
117
210
110
202
103
194
97
186
91
179
86
550
550
550
520
550
490
550
468
550
448
550
426
550
405
550
389
550
375
550
359
533
336
499
304
468
276
440
251
414
229
390
210
369
193
349
178
331
164
314
151
298
140
26K9
550
541
550
522
550
501
550
479
550
459
550
444
519
407
488
370
459
338
433
310
409
284
387
262
367
241
348
223
331
207
315
192
300
178
286
166
273
155
261
145
250
135
239
127
229
119
220
112
211
105
203
99
195
93
ASD
ECONOMY TABLE FOR OPEN WEB STEEL JOISTS, K-SERIES
Based on a 50 ksi Maximum Yield Strength - Loads Shown in Pounds per Linear Foot (plf)
Joist
Designation
Depth (In.)
Approx. Wt.
(lbs/ft.)
Span (ft.)
30K7
22K10
28K8
28K9
24K10
30K8
30K9
22K11
26K10
28K10
30K10
24K12
30K11
26K12
28K12
30K12
30
12.3
22
12.6
28
12.7
28
13
24
13.1
30
13.2
30
13.4
22
13.8
26
13.8
28
14.3
30
15
24
16
30
16.4
26
16.6
28
17.1
30
17.6
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
550
543
534
508
501
461
471
420
443
384
418
351
395
323
373
297
354
274
336
253
319
234
303
217
289
202
276
188
263
176
251
164
241
153
230
144
221
135
212
127
203
119
195
112
188
106
181
100
174
94
168
89
162
84
156
80
151
76
146
72
141
69
550
548
550
518
550
495
550
474
550
454
550
432
550
413
550
399
550
385
550
369
517
337
486
307
458
280
432
257
408
236
386
217
366
200
347
185
330
171
314
159
299
148
285
138
272
128
550
543
550
522
550
500
550
480
515
438
484
399
456
364
430
333
406
306
384
282
364
260
346
240
328
222
312
206
297
192
284
179
271
167
259
156
248
146
237
136
227
128
218
120
209
113
201
106
193
100
186
95
179
89
173
85
166
80
550
543
550
522
550
500
550
480
549
463
527
432
496
395
468
361
442
332
418
305
396
282
376
260
357
241
340
224
324
208
309
194
295
181
282
169
270
158
258
148
247
139
237
130
228
123
219
115
210
109
203
103
195
97
188
92
181
87
550
544
550
520
550
499
550
479
550
456
550
436
550
422
550
410
549
393
532
368
502
337
473
308
447
283
423
260
401
240
380
222
361
206
344
191
327
177
312
165
298
154
285
144
272
135
261
126
250
118
550
543
550
520
549
500
520
460
490
420
462
384
436
353
413
325
391
300
371
277
353
256
335
238
320
221
305
206
291
192
278
179
266
168
255
157
244
148
234
139
225
130
216
123
208
116
200
109
192
103
185
98
179
92
173
88
167
83
161
79
156
75
550
543
550
520
549
500
532
468
516
441
501
415
475
383
449
352
426
325
404
300
384
278
365
258
348
240
332
223
317
208
303
195
290
182
277
171
266
160
255
150
245
141
235
133
226
126
218
119
209
112
202
106
195
100
188
95
181
90
175
86
169
81
550
548
550
518
550
495
550
474
550
454
550
432
550
413
550
399
550
385
550
369
549
355
532
334
516
314
494
292
467
269
442
247
419
228
397
211
377
195
359
181
342
168
326
157
311
146
C-9
550
541
550
522
550
501
550
479
550
459
550
444
549
431
532
404
516
378
501
356
486
334
460
308
436
284
413
262
393
243
374
225
356
210
339
195
324
182
310
170
296
159
284
149
272
140
261
131
250
124
241
116
231
110
550
543
550
522
550
500
550
480
549
463
532
435
516
410
501
389
487
366
474
344
461
325
447
306
424
284
404
263
384
245
367
228
350
212
334
198
320
186
306
174
294
163
282
153
270
144
260
136
250
128
240
121
232
114
223
108
215
102
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
413
282
394
263
376
245
359
229
344
214
329
201
315
188
303
177
291
166
279
157
268
148
258
140
249
132
240
125
231
118
223
112
215
106
208
101
201
96
550
544
550
520
550
499
550
479
550
456
550
436
550
422
550
410
549
393
532
368
516
344
501
324
487
306
474
290
461
275
449
261
438
247
427
235
417
224
406
213
387
199
370
185
354
174
339
163
325
153
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
417
284
407
270
398
258
389
246
380
236
372
226
362
215
347
202
333
190
320
179
308
169
296
159
285
150
275
142
265
135
256
128
247
121
239
115
231
109
550
541
550
522
550
501
550
479
550
459
550
444
549
431
532
404
516
378
501
356
487
334
474
315
461
299
449
283
438
269
427
256
417
244
407
232
398
222
389
212
380
203
369
192
353
180
339
169
325
159
313
150
301
142
550
543
550
522
550
500
550
480
549
463
532
435
516
410
501
389
487
366
474
344
461
325
449
308
438
291
427
277
417
264
407
252
398
240
389
229
380
219
372
210
365
201
357
193
350
185
338
175
325
165
313
156
301
147
290
139
280
132
550
543
550
520
549
500
532
468
516
441
501
415
487
392
474
374
461
353
449
333
438
315
427
300
417
284
407
270
398
258
389
246
380
236
372
226
365
216
357
207
350
199
343
192
336
184
330
177
324
170
312
161
301
153
290
145
280
137
271
130
262
124
C-10
Where fire protective materials are to be applied directly to the steel joists or Joist Girders, it is often desired to
have the joist furnished as unpainted. The Specifying
Professional should indicate on the structural contract
drawings if the joists or Joist Girders are to be painted
or not.
Certain older U.L. fire rated assemblies may refer to
joist series that predate the K-Series joists. Where one
of these assemblies is selected, refer to the U.L Fire
Resistance Directory for special provisions for substituting a K-Series joist in lieu of an S-, J-, and/or H-Series
joist.
D-1
1 Hr.
Concrete
Minimum
Type
Thickness (in.)
Protection
Material
Minimum Joist
Size
Acoustical
12K1, 18LH02
2.5
10K1
2.5
10K1
Exposed Grid
Gypsum Board
10K1
2.5
10K1
2.5
LW, NW
NW
NW
Acoustical
2.5
Exposed Grid
Gypsum Board
72
20G@14plf *
W6 x 12
G205
72
W6 x 12
G208
72
20G@14plf *
W6 x 12
G256
48
W8 x 24
G548
20G@13plf
W8 x 15
D216
NW
D219
20G@20plf
W8 x 28
D502
2.5
24 (48)
20G@13plf
W6 x 12
G203
10K1
2.5
72
20G@14plf *
W6 x 12
G205
10K1
72
10K1
2.5
24 (48)
NW
W6 x 12
G208
G213
24 (48)
20G@13plf
W8 x 31
G228
10K1
2.5
10K1
24 (48)
20G@13plf
W8 x 24
G229
10K1
2.5
24 (48)
20G@13plf
W6 x 12
G243
10K1
2.5
24 (48)
20G@13plf
W8 x 31
G268
12K1
24 (48)
NS
G502
20G@13plf
W8 x 15
D216
NW
LW, NW
12K1, 18LH02
2.5
NL
Gypsum Board
2.25
8K1
NW
2.5
10K1
D219
20G@20plf
W8 x 28
D502
24 (48)
W6 x 25
G023
24 (48)
20G@13plf
W8 x 20
G031
30 (48)
20G@13plf
W10 x 21
G036
NW
10K1
2 Hr.
Exposed Grid
D219
10K1
Acoustical
Concealed Grid
D216
20G@13plf
W8 x 15
NL
Gypsum Board
UL Design
Number
NL
LW, NW
12K1, 18LH02
1 1/2 Hr.
Minimum
Maximum Joist
Primary Support
Spacing (in.)
Member
10K1
2.5
24 (48)
20G@13plf
W6 x 12
G203
10K1
2.5
72
20G@14plf *
W6 x 12
G205
10K1
2.5
10K1
2.5
24 (48)
10K1
2.5
24 (48)
W8 x 31
G227
24 (48)
20G@13plf
W8 x 31
G228
10K1
NW
2.5
72
W6 x 12
G208
G213
D-2
Protection
Material
Minimum Joist
Size
Concrete
Minimum
Type
Thickness (in.)
10K1
2.5
10K1
2.5
Minimum
Maximum Joist
Primary Support
Spacing (in.)
Member
24 (48)
20G@13plf
W8 x 24
G229
24 (48)
20G@13plf
W6 x 12
G243
NW
Exposed Grid
10K1
2.5
72
20G@14plf *
W6 x 12
G256
10K1
2.5
24 (48)
20G@13plf
W8 x 31
G268
10K1
24 (48)
NS
G505
2 Hr.
Gypsum Board
Acoustical
G514
24 (48)
20G@13plf
W10 x 21
G523
2.5
10K1
2.5
10K1
2.5
24 (48)
20G@13plf
W8 x 24
G529
10K1
2.5
24 (48)
20G@13plf
W10 x 21
G547
12K1, 18LH02
3.25
NL
20G@13plf
W8 x 15
10K1
3.5
24 (48)
20G@13plf
W8 x 20
G033
NW
LW, NW
NW
D216
D219
10K1
3.25
30 (48)
20G@13plf
W10 x 21
G036
10K1
3.5
48
20G@14plf *
W6 x 12
G205
10K1
3.5
24 (48)
W6 x 12
G213
24 (48)
20G@13plf
W8 x 24
G229
3.5
48
20G@14plf *
W6 x 12
G256
2.63
24 (48)
20G@13plf
W8 x 31
G268
10K1
24 (48)
20G@13plf
W10 x 21
G523
10K1
2.75
24 (48)
20G@13plf
W8 x 24
G529
10K1
24 (48)
20G@13plf
W10 x 21
G547
10K1
3.25
Exposed Grid
NW
10K1
10K1
(22 ksi max.)
Gypsum Board
24 (48)
20G@14plf *
W8 x 31
10K1
Concealed Grid
3 Hr.
UL Design
Number
NW
D-3
Protection
Material
Minimum Joist
Size
NS
2.5
10K1
2.5
2.5
3.25
LW
2.5
LW
3.5
NW
NS
LW, NW
16K6
SAFRM
16K6*
16K6
NW
2.5
LW, NW
LW
3.75
NW
NS
2.5
16K6*
2.5
LW, NW
LW
3.75
NW
NS
2.5
10K1
2.5
10K1
2.5
NS
3.25
LW
LW
NW
2.5
LW, NW
3.5
LW
4.5
NW
2.5
LW, NW
3.5
LW
4.5
NW
10K1*
16K6*
16K6
SAFRM
LW
2.5
12K1
1 1/2 Hr.
3
3.75
16K6*
16K6*
16K6
16K6*
2.5
NS
2.5
16K6*
12K5
UL Design
Number
D759
NS
16K6*
Minimum
Maximum Joist
Primary Support
Spacing
Member
LW, NW
10K1
10K1*
1 Hr.
Concrete
Minimum
Type
Thickness (in.)
D779
NL
W8 x 28
D780
D782
D925
42
20G@20plf
W8 x 28
G701
50.5
NS
G702
42
NS
G705
50.5
NS
G706
42
20G@20plf
W8 x 28
G708
42
W8 x 28
G709
42
20g@20plf
W8 x 24
G801
50.5
NS
G802
D759
LW, NW
LW, NW
2.5
3.5
LW
4.5
NW
D779
NL
W8 x 28
D780
D782
D925
42
20G@20plf
W8 x 28
G701
50.5
NS
G702
42
NS
G705
50.5
NS
G706
42
20G@20plf
W8 x 28
G708
42
W8 x 28
G709
42
20G@20plf
W8 x 24
G801
50.5
NS
G802
D-4
Protection
Material
Minimum Joist
Size
NS
2.5
10K1
2.5
10K1
2.5
NS
3.25
LW
3.25
LW
4.5
NW
2.5
LW, NW
10K1*
16K6*
16K6
2 Hr.
SAFRM
16K6*
16K6
4 Hr.
SAFRM
NW
2.5
LW,NW
LW
5.25
NW
2.5
16K6*
2.5
LW, NW
LW
5.25
NW
NS
2.5
10K1
2.5
10K1
2.5
NS
3.25
LW
4.19
LW
5.25
NW
10K1*
SAFRM
LW
NS
UL Design
Number
D759
2.5
Minimum
Maximum Joist
Primary Support
Spacing
Member
D779
LW, NW
5.25
16K6*
12K5
3 Hr.
Concrete
Minimum
Type
Thickness (in.)
NL
W8 x 28
D780
D782
D925
42
20G@20plf
W8 x 28
G701
50.5
NS
G702
42
NS
G705
50.5
NS
G706
42
20G@20plf
W8 x 28
G708
42
W8 x 28
G709
42
20G@20plf
W8 x 24
G801
50.5
NS
G802
D759
D779
LW, NW
NL
W8 x 28
D780
D782
D925
16K6*
NS
42
20G@20plf
W8 x 28
G701
16K6*
2.75
42
NS
G705
16K6*
2.75
42
20G@20plf
W8 x 28
G708
NS
2.75
42
W8 x 28
G709
42
20G@20plf
W8 x 24
G801
NL
W8 x 28
LW, NW
16K6*
2.75
10K1
2.5
LW, NW
NS
3.25
LW
D-5
D779
D782
Protection
Material
Exposed Grid
1 Hr.
Fiber Board
Gypsum Board
Minimum Joist
Size
Built Up Roof
Deck Material
Insulation
Description
Minimum
Maximum Joist
Primary Support
Spacing (in.)
Member
UL Design
Number
12K1
22 MSG Min.
84
W8 x 17
P201
10K1
26 MSG Min.
48
W6 x 12
P202
10K1
26 MSG Min.
48
20G@13plf
P211
72
20G@13plf
W8 x 17
P214
72
20G@13plf
W6 x 12
P225
48
NS
P227
P230
12K3
28 MSG Min.
12K1
26 MSG Min.
12K3
24 MSG Min.
Fiber Board
Building Units
12K3
26 MSG Min.
Fiber Board
72
20G@13plf
W6 x 12
12K1
26 MSG Min.
Insulating
Concrete
48
20G@14plf *
W8 x 15
P231
12K3
24 MSG Min.
Foamed Plastic
72
W8 x 15
P235
10K1
28 MSG Min.
Insulating
Concrete
72
20G@13plf
W8 x 15
P246
12K5
26 MSG Min.
Fiber Board
48
W6 x 12
P250
12K1
28 MSG Min.
Insulating
Concrete
72
20G@13plf
W6 x 12
P251
10K1
22 MSG Min.
Fiber Board
72
W6 x 12
P254
10K1
28 MSG Min.
Insulating
Concrete
72
W8 x 15
P255
10K1
24 MSG Min.
Fiber Board
72
NS
P259
12K1
28 MSG Min.
Insulating
Concrete
72
20G@13plf
W6 x 12
P261
12K1
26 MSG Min.
Insulating
Concrete
72
20G@14plf *
W8 x 15
P264
10K1
Batts and
Blankets
60
NS
P265
10K1
26 MSG Min.
Fiber Board
48
W6 x 16
P267
10K1
Batts and
Blankets
60
NS
P268
12K1
26 MSG Min.
Insulating
Concrete
72
20G@14plf *
W8 x 15
P269
NS
W6 x 16
P301
48
NS
P302
10K1
24 MSG Min.
10K1
22 MSG Min.
10K1
22 MSG Min.
Fiber Board
NS
W6 x 16
P303
60
W8 x 24
P509
12K3
26 MSG Min.
Insulating
Concrete
12K3
24 MSG Min.
Fiber Board
72
20G@13plf
W8 x 13
P510
10K1
20 MSG Min.
Fiber Board
48
NS
P519
D-6
Protection
Material
Minimum Joist
Size
Built Up Roof
Deck Material
Insulation
Description
48
NS
P227
P230
Fiber Board
72
12K3
24 MSG Min.
Building Units
12K3
26 MSG Min.
Fiber Board
48
20G@13plf
W6 x 12
12K1
26 MSG Min.
Insulating
Concrete
48
20G@14plf *
W8 x 24
P231
12K5
26 MSG Min.
Fiber Board
48
W6 x 12
P250
12K1
28 MSG Min.
Insulating
Concrete
72
20G@13plf
W6 x 12
P251
10K1
24 MSG Min.
Fiber Board
72
NS
P259
10K1
Batts and
Blankets
60
NS
P265
10K1
20 MSG Min.
Fiber Board
48
NS
P266
10K1
Batts and
Blankets
60
NS
P268
12K1
26 MSG Min.
Insulating
Concrete
72
20G@14plf *
W8 x 24
P269
10K1
24 MSG Min.
Fiber Board
NS
W6 x 16
P301
Metal Lath
12K5
22 MSG Min.
Fiber Board
72
NS
P404
Gypsum Board
12K3
24 MSG Min.
Fiber Board
72
20G@13plf
W8 x 13
P510
10K1
24 MSG Min.
Fiber Board
72
W6 x 12
P237
12K1
28 MSG Min.
Insulating
Concrete
72
20G@13plf
W6 x 12
P251
P266
10K1
20 MSG Min.
Fiber Board
48
NS
Fiber Board
10K1
24 MSG Min.
Fiber Board
NS
W6 x 16
P301
Metal Lath
12K5
22 MSG Min.
Fiber Board
72
NS
P404
72
20G@13plf
P514
48
NS
P519
10K1
Gypsum Board
3 Hr.
P225
26 MSG Min.
Fiber Board
Exposed Grid
2 Hr.
UL Design
Number
20G@13plf
W6 x 12
12K1
Exposed Grid
1 1/2 Hr.
Minimum
Maximum Joist
Primary Support
Spacing (in.)
Member
Metal Lath
22 MSG Min.
Fiber Board
20 MSG Min.
14K1
26 MSG Min.
Insulating
Concrete
66
NS
P520
10K1
28 MSG Min.
Insulating
Concrete
48
NS
P405
D-7
Protection
Material
1 Hr.
SAFRM
Minimum Joist
Size
Built Up Roof
Deck Material
Insulation
Description
Minimum
Maximum Joist
Primary
Support
Spacing (in.)
Member
UL Design
Number
10K1
22 MSG Min.
Building Units
NS
NS
P822
12K3
22 MSG Min.
Fiber Board
NS
W8 x 20
P824
SAFRM
12K5
28 MSG Min.
Insulating
Concrete
96
W6 x 16
P919
SAFRM
10K1
22 MSG Min.
Building Units
NS
W6 x 16
P728
14K4
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P701
14K4
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P711
12K3
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P717
10K1
22 MSG Min.
Foamed Plastic
NS
20G@13plf
W8 x 28
P725
10K1
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P726
14K4
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P734
14K4
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P736
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P739
10K1
22 MSG Min.
Fiber Board
NS
W6 x 16
P740
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P743
P801
1 Hr.
and
1-1/2 Hr.
1-1/2 Hr.
and
2 Hr.
1 Hr.,
1-1/2 Hr.
and
2 Hr.
SAFRM
12K3
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
10K1
22 MSG Min.
Fiber Board
NS
20G@13plf
W6 x 16
P815
10K1
22 MSG Min.
Fiber Board
NS
W6 x 16
P816
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P819
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P825
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P827
P828
12K1
22 MSG Min.
Fiber Board
NS
20G@13plf
W8 x 20
10K1
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P902
10K1
28 MSG Min.
Insulating
Concrete
NS
W8 x 10
P907
10K1
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P908
D-8
Protection
Material
Minimum Joist
Size
Built Up Roof
Deck Material
Insulation
Description
and
UL Design
Number
10K1
28 MSG Min.
Insulating
Concrete
NS
W8 x 10
P920
12K5
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P921
10K1
28 MSG Min.
Insulating
Concrete
NS
W6 x 16
P922
10K1
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P923
10K1
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P925
12K5
28 MSG Min.
Insulating
Concrete
NS
W8 x 10
P926
14K4
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P927
12K5
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P928
12K3
28 MSG Min.
Insulating
Concrete
NS
20G@13plf
W8 x 10
P929
10K1
28 MSG Min.
Insulating
Concrete
NS
W6 x 16
P936
12K3
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P718
P720
1 Hr.,
1-1/2 Hr.
Minimum
Maximum Joist
Primary
Support
Spacing (in.)
Member
SAFRM
2 Hr.
12K3
22 MSG Min.
Foamed Plastic
NS
20G@13plf
W6 x 16
12K3
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P729
10K1
22 MSG Min.
Foamed Plastic
NS
20G@13plf
W6 x 16
P719
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P722
10K1
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P723
and
10K1
22 MSG Min.
Foamed Plastic
NS
W8 x 28
P732
3 Hr.
10K1* ,16K2
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P733
10K1*
22 MSG Min.
Foamed Plastic
NS
W6 x 16
P826
2 Hr.
SAFRM
1 Hr.,
1-1/2 Hr.,
2 Hr.
SAFRM
D-9
D-10
BAY LENGTH
JOIST GIRDERS
STEEL BEAM
BAY LENGTH
BAY LENGTH
STEEL CHANNEL
STEEL COLUMN
BAY LENGTH
BAY LENGTH
STEEL COLUMN
STEEL TUBE
E-1
BAY LENGTH
BAY LENGTH
STEEL TUBE
MASONRY OR TILT-UP
BAY LENGTH
BAY LENGTH
MASONRY OR TILT-UP
BAY LENGTH
BAY LENGTH
MASONRY OR TILT-UP
MASONRY OR TILT-UP
BAY LENGTH
E-2
1926.751 DEFINITIONS
(Selected items only).
Anchored bridging means that the steel joist bridging is connected to a bridging terminus point.
Bolted diagonal bridging means diagonal bridging that is
bolted to a steel joist or joists.
(a) General.
(1) Except as provided in paragraph (a)(2) of this section,
where steel joists are used and columns are not framed in at
least two directions with solid web structural steel members, a
steel joist shall be field-bolted at the column to provide lateral
stability to the column during erection. For the installation of
this joist:
(i) A vertical stabilizer plate shall be provided on each
column for steel joists. The plate shall be a minimum of 6 inch by 6 inch (152 mm by 152 mm) and
shall extend at least 3 inches (76 mm) below the
bottom chord of the joist with a 13 /16 inch (21 mm)
hole to provide an attachment point for guying or
plumbing cables.
(ii) The bottom chords of steel joists at columns shall
be stabilized to prevent rotation during erection.
(iii) Hoisting cables shall not be released until the
seat at each end of the steel joist is field-bolted,
and each end of the bottom chord is restrained by
the column stabilizer plate.
(2) Where constructibility does not allow a steel joist to be
installed at the column:
(i) an alternate means of stabilizing joists shall be
installed on both sides near the column and shall:
(A) provide stability equivalent to paragraph
(a)(1) of this section;
(B) be designed by a qualified person;
(C) be shop installed; and
(D) be included in the erection drawings.
(ii) hoisting cables shall not be released until the seat
at each end of the steel joist is field-bolted and
the joist is stabilized.
(3) Where steel joists at or near columns span 60 feet (18.3
m) or less, the joist shall be designed with sufficient strength
to allow one employee to release the hoisting cable without
the need for erection bridging.
E-3
(5) A steel joist or steel joist girder shall not be placed on any
support structure unless such structure is stabilized.
(6) When steel joist(s) are landed on a structure, they shall
be secured to prevent unintentional displacement prior to
installation.
Joist
Span
8L1 8K1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
10K1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
12K1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
12K3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
12K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14K1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
14K3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16K2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
16K3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
16K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
16K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
16K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18K3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
18K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
18K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
18K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
18K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20K3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
20K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
20K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
20K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
20K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
20K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
20K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
22K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
22K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
22K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
22K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
22K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
22K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 NM
22K11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 NM
24K4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
24K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
24K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
24K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
24K8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
24K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
24K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24K12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
26K5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
26K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
Except for steel joists that have been pre-assembled into panels, connections of individual steel
joists to steel structures in bays of 40 feet (12.2 m)
or more shall be fabricated to allow for field bolting
during erection.
E-4
Joist
Span
26K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
26K8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
26K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 44-0
26K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
26K12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28K6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
28K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430
28K8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
28K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
28K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
28K12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
30K7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
30K8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
30K9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
30K10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
30K11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
30K12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
10KCS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
10KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
10KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
12KCS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
12KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
12KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14KCS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
14KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
16KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
18KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
20KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
20KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
22KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
22KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
22KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
22KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
24KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
24KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
26KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
26KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440
26KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
26KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28KCS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
28KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
28KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
28KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530
30KC53 30KCS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
30KCS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
30KCS5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
NM = diagonal bolted bridging not mandatory
for joists under 40 feet.
Joist
Span
18LH02 . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
18LH03 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH04 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH05 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH06 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
18LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH02 . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
20LH03 . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
20LH04 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH05 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH06 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
20LH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24LH03 . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
24LH04 . . . . . . . . . . . . . . . . . . . . . . . . . . . 390
24LH05 . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
24LH06 . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
24LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24LH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
24LH11 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28LH05 . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
28LH06 . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 46-0
28LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM 54-0
28LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM 54-0
28LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28LH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28LH11 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28LH12 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
28LH13 . . . . . . . . . . . . . . . . . . . . . . . . . . . NM
32LH06 . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 through 600
32LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 through 600
32LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 through 600
32LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
32LH15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 through 600
36LH08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 through 600
36LH09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 570 through 600
36LH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
36LH15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NM through 600
NM = diagonal bolted bridging not mandatory
for joists under 40 feet.
E-5
(ii) The erection drawing shall be the exclusive indicator of the proper placement of this bridging;
(iii) Shop-installed bridging clips, or functional equivalents, shall be used where the bridging bolts to
the steel joists;
(2) Where the span of the steel joist is over 60 feet (18.3 m)
through 100 feet (30.5 m), the following shall apply:
(2) Except for paragraph (e)(4) of this section, no construction loads are allowed on the steel joists until all bridging is
installed and anchored and all joist-bearing ends are
attached.
(3) Where the span of the steel joist is over 100 feet (30.5 m)
through 144 feet (43.9 m), the following shall apply:
(i) All rows of bridging shall be bolted diagonal bridging;
(i) The employer has first determined from a qualified person and documented in a site-specific
erection plan that the structure or portion of the
structure is capable of supporting the load;
(4) For steel members spanning over 144 feet (43.9 m), the
erection methods used shall be in accordance with
1926.756.
E-6
ILLUSTRATIONS OF
OSHA BRIDGING
TERMINUS POINTS
(NON-MANDATORY)
Guidelines for Complying with OSHA Steel Erection Standard, Paragraph 1926.757(a)(10) and 1926.757(c)(5).
TYP
TYP
HORIZ. BRDG.
HORIZ. BRDG.
HORIZONTAL BRIDGING
TERMINUS AT WALL
HORIZONTAL BRIDGING
TERMINUS AT WALL
TYP
TYP
HORIZ. BRDG.
HORIZ. BRDG.
HORIZONTAL BRIDGING
TERMINUS AT PANEL WALL
HORIZONTAL BRIDGING
TERMINUS AT
STRUCTURAL SHAPE
E-7
TYP
TYP
BOLTED
CONNECTION
HORIZONTAL BRIDGING
TERMINUS AT STRUCTURAL
SHAPE WITH OPTIONAL
"X-BRIDGING"
TYP
TYP
BOLTED
CONNECTION
BOLTED
CONNECTION
E-8
TYP
HORIZONTAL TRUSS
WEBBING
TYP
LOOPED
AROUND
TOP CHORD
LOOPED
AROUND
TOP CHORD
INDEPENDENT
TEMP. GUY
CABLES
INDEPENDENT
TEMP. GUY
CABLES
HORIZ. BRDG.
POSITIVE
ANCHORAGE
POINT
POSITIVE
ANCHORAGE
POINT
HORIZONTAL BRIDGING
TERMINUS POINT
SECURED BY TEMP.
GUY CABLES
DIAGONAL BRIDGING
TERMINUS POINT
SECURED BY TEMP.
GUY CABLES
E-9
www.steeljoist.org
2005