Professional Documents
Culture Documents
Image Runner Advance c5051 Series SM Rev0 092409
Image Runner Advance c5051 Series SM Rev0 092409
Service Manual
Product Outline Function Periodic Servicing Parts Replacing and Cleaning Adjustments Troubleshooting Error Code Service Mode Installation
1 2 3 4 5 6 7 8 9
Appendix
0-2
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality. The following paragraph does not apply to any countries where such provisions are inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks of the individual companies.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
0-2
0-3
Explanation of Symbols
The following symbols are used throughout this Service Manual. 1. Symbols Explanation Symbols Explanation
Remove the claw.
The following rules apply throughout this Service Manual: Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of operation. In the diagrams, signal.
Insert the claw.
Check.
F-0-1
represents the path of mechanical drive; where a signal name indicates the direction of the electric
F-0-2
Check visually.
The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the delivery unit door, which results in supplying the machine with power.
F-0-3
F-0-4
2.
In the digital circuits, '1' is used to indicate that the voltage level of a given signal is "High", while '0' is used to indicate "Low". (The voltage value, however, differs from circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD
F-0-5
F-0-6
signal goes on when '0'. In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the operations of the microprocessors used in the machines
F-0-7
F-0-8
are not discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads.
F-0-9
Remove the cable/wire from the cable guide or wire saddle. Set the cable/wire to the cable guide or wire saddle.
F-0-10
The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be communicated in the form of Service Information bulletins. All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant Service Information bulletins and be able to identify and isolate faults in the machine.
F-0-11
F-0-12
F-0-13
F-0-14
F-0-15
0-3
Safety Precautions
CDRH Act Laser Safety Handling of Laser System Turn power switch ON Safety of Toner Notes When Handling a Lithium Battery Notes Before Servicing
0
0-2
CDRH Act
The Center for Devices and Radiological Health of the US Food and Drum Administration put into force regulations concerning laser products on August 2, 1976. These regulations apply to laser products manufactured on and after August 1, 1976, and the sale of laser products not certified under the regulations is banned within the Untied States. The label shown here indicates compliance with the CDRH regulations, and its attachment is required on all laser products that are soled in the United States.
CANON INC.
30-2,SHIMOMARUKO,3-CHOME,OHTA-KU,TOKYO,JAPAN
MANUFACTURED:
THIS PRODUCT CONHORMS WITH DHHS RADIATION PERFORMANCE STANDARD 21CFR CHAPTER 1 SUBCHAPTER J.
F-0-16
Laser Safety
Laser beam radiation may pose a danger to the human body. A laser scanner mounted on the machine is sealed with the protection housing and external cover to prevent the laser beam from leaking to the outside. The laser beam never leaks out of the scanner as far as users operate the machine normally.
F-0-17
0-2
0
0-3
Safety of Toner
About Toner
The machine's toner is a non-toxic material made of plastic, iron, and small amounts of dye.
Do not use warm water, which will cause the toner to jell and fuse permanently with the
fibers of the cloth.
Tonner is easy to react with plastic material, avoid contact with plastic.
0-3
0
0-4
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The following warnings are given to comply with Safety Principles (EN60950).
Wenn mit dem falschen Typ ausgewechselt, besteht Explosionsgefahr. Gebrauchte Batterien gem der Anleitung beseitigen.
At servicing, be sure to turn OFF the power source according to the specified steps and disconnect the power plug.
0-4
Product Overview
Product Lineup Feature Specifications Name of Parts
1
1-2
Product Lineup
Host machine
imageRUNNER ADVANCE C50 51 A B A: Product category (90: Production model, 50 : Office model) B: Print speed (unit is ppm : print per minutes)
F-1-2
F-1-1
Model type
C5051 C5045 C5035
35 / 35ppm
C5030
30 / 30ppm
Print Speed (BW / 51 / 51ppm 45 / 45ppm Color) Positioning High-speed / high-quality Middle-Office model Target machine : iRC5180 / 4580 / 3880Series
1-2
1
1-3
Option
Pickup delivery / image reading options
6 4 5
No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Brand name
Inner Finisher Additional Tray-A1 Inner Finisher-A1 Duplex Color Image Reader Unit-B1 Reader Heater Kit-G1 Color Image Reader Unit-B1 Color Image Reader Unit-B2 Printer Cover-C1 Copy Tray-J1 Cassette Heater Unit-32 Paper Deck Unit-B1 Envelope Feeder Attachment-D1 FL Cassette-AG1 FL Cassette-AH1 Cassette Heater Unit-37 Cassette Feeding Unit-AD1 Buffer Pass Unit-G1 Inner 2Way Tray-F1 External 2 Hole Puncher-B1
8 9
7 2
17
10 11
16 15 20 19 18 14 13
F-1-3
12
1-3
1
1-4 Function expanding option
6
No.
14 15 16 17 18 19 20 21 22 23 24
Brand name
Additional Memory Type B (512MB) Image Data Analyzer Board-A1 Super G3 FAX Board-AE1 Super G3 2nd Line Fax Board-AE1 Super G3 3rd/4th Line Fax Board-AE1 imagePASS-B1 IPSec Board-B2 Wireless LAN Board-B1 Signal Interface Kit-A1 Serial Interface Kit-K1 PCL Printer Kit-AE1 Direct Print Kit (for PDF/XPS)-H1 Barcode Printing Kit-D1 Encrypted Secure Print Software-D1 IMPOSE(Ver2.7) Roman Universal Send Digital User Signature Kit-C1 Universal Send Advanced Feature Set-D1 Universal Send Security Feature Set-D1 Remote Operators Software Kit-B1 Remote Operators Software Kit-A3 HOTFOLDER VER.2 HDD Data Erase Kit-A1 Remote Fax Kit-A1 PS Printer Kit-AE1 Secure Watermark-A1 Document Scan Lock Kit-A1 ACCESS MANAGEMENT SYSTEM Kit-B1 Web Access Software-H1
24 12 13 14
9 15 16 17 19 18
F-1-4
No.
1 2 3 4 5 6 7 8 9 10 11 12 13
Brand name
Voice Operation Kit-C1 Voice Guidance Kit-F1 Removable HDD Kit-AC1 2.5inch/80GB HDD-C1 2.5inch/250GB HDD-D1 Copy Card Reader-C1 Copy Card Reader Attachment-B1 Utility Tray-A1 Multimedia Reader/Writer-A1 USB Device Port-B1 ColorPASS-GX300/PS-GX300 Key Switch Unit-A2 HDD Mirroring Kit-D1 HDD Data Encryption & Mirroring Kit-C1 Expansion Bus-F1
Note: There is a combination restriction when installing No1,2,5 to 6. (Part No5 can be installed with any of those. Other than No5, only one of them can be installed.)
1-4
1
1-5
Feature
Product feature
Product feature
Features at servicing
Improvement on upgrade operation
It is possible to upgrade options through the host machine. Same as conventional way, use SST (service support tool) to upgrade.
High-speed support ITB Primary Transfer Roller detaching control is adopted. Low running cost
Developing Assembly ACR control is adopted. Developing Assembly/Drum Unit are separated. Highly-durable drum is adopted(BK only). High image quality Low running cost Main Controller Next generation controller is adopted. High image quality High-speed support
Laser Scanner Unit Twin Laser Scanner Unit Capable of 1200 dpi High image quality High-speed support
To prevent the communication error due to following factors, new type connector is adopted.
Loose connector / disconnection due to vibration during transportation Imperfect connection of connector at service operation
F-1-5
1-5
1
1-6
Specification
Specification
Host machine installation method Photosensitive medium Exposure method Charging method Developing method Transfer method Desktop type Phi 30 OPC Laser exposure Roller charging Dry type 2-component jumping development Intermediate belt transfer (Primary transfer: roller transfer, secondary transfer: roller transfer) Separation method Curvature separation + static eliminator Pickup method Separation retard Fixing method On demand fixing (Ceramic nitride heater + Phi 30 elastic film) Delivery method Facedown (inner delivery) Drum cleaning method Cleaning blade Transfer cleaning method Cleaning blade Toner type Non-magnetic negative toner Toner supply method Toner container method Toner level detection function Yes Leading edge image margin 4.0+1.5/-1.0mm Left edge image margin 2.5+/-1.5mm Leading edge blank width 4.0+1.5/-1.0mm Left edge blank width 2.5+/-1.5mm Warm-up time At power-ON, 38 sec or less Image gradation 256 gradation Print resolution 1200 x 1200dpi Paper type (cassette) Thin paper (52 to 63g/m2), Recycled paper (64 to 81g/m2), Color paper, Pre-Punched paper, Bond paper, Plain paper (64 to 105g/ m2), Heavy paper (106 to 209g/m2), Textured paper, Transparency film, Tab paper, Envelope Paper type (multi-purpose tray) Thin paper (52 to 63g/m2), Recycled paper (64 to 81g/m2), Color paper, Pre-Punched paper, Bond paper, Plain paper (64 to 105g/ m2), Heavy paper (106 to 256g/m2), Textured paper, Tracking paper, Coater paper,Labels paper, Washi paper,Transparency film, Tab Paper size (upper cassette) B4,A4,A4R,B5,B5R,A5R,LGL,LTRR,LTR,EXEC,Custom size (Min 139.7mm x 182mm to Max 304.8mm x 390mm),K8,K16,K16R Paper size (lower cassette) A3, B4, A4, A4R, B5, B5R, A5R, 12"18"(305mm457mm), 11" x 17", LGL, LTR, LTRR, STMTR, EXEC, Custom size (Min 139.7mm x 182mm to Max 304.8mm x 457.2mm), K8, K16, K16R, Envelope (COM10, Monarch, DL, ISO-B5, ISO-C5)
Paper size (multi-purpose tray A3, B4, A4, A4R, B5, A5,A5R,12""18""(305mm457mm),11"" pickup) 17"", LGL, LTR, LTRR, STMT, STMTR, EXEC, K8, K16, K16R, FLS, 305457, 320450(SRA3), Custom size (Min 99mm x 139.7mm to Max 320 mm x 457.2mm),Postcard, Envelope (COM10, Monarch, DL, ISO-B5, ISO-C5) Pickup capacity Cassette: 550 sheet (80g/m2), multi-purpose tray pickup: 100 sheet (80g/m2) Duplexing method Through path duplexing Memory capacity Main controller PCB: 1 GB Main controller PCB2: 1GB/1.5GB (differs depending on destination and model) Note: Option (additional memory 512MB) can be extended to main controller PCB 2. HDD capacity 80GB (Option 80GB C1/ 250GB D1) Operation noise 75dB or less (during printing) Ozone amount Maximum: 0.01 ppm or less Power rating AC120V/20A (image RUNNER ADVANCE C5051/C5045 Series) AC120V/15A (image RUNNER ADVANCE C5035/C5030 Series) AC220-240V/10A Maximum power consumption image RUNNER ADVANCE C5051/C5045 Series: 1.8kW or less image RUNNER ADVANCE C5035/C5030 Series: 1.3kW or less Power consumption during 120V:1.1KW or less copy 220V-240:1.3KW or less Power consumption during 120V: 120W or less standby 220V-240: 150W or less Dimension (W x D x H) 620mm x735mmx 801mm (printer only) Grammage Approx. 133kg (printer only)
T-1-5
1-6
1
1-7
Weight / Size
Product name
iR ADVANCE C5051/C5045 iR ADVANCE C5035/C5030 Duplex Color Image Reader Unit-B1 Color Image Reader Unit-B1 Color Image Reader Unit-B2 Cassette Feeding Unit-AD1 Paper Deck Unit-B1 Envelope Feeder Attachment-D1 Inner Finisher-A1 Staple Finisher-C1 Booklet Finisher-C1 Buffer Pass Unit-G1 External 2 Hole Puncher-B1 External 2/3 Hole Puncher-B1
Depth (mm)
735 735 588 536 564 700 603 307 540 656 656 493 623 656
Height (mm)
806 806 251 207 72 251 473 81 234 1071 1071 184 908 1071
WeightApprox. (Kg)
153 170 38.8 23 13.7 27.5 37 1.2 13.5 47 76 4 7.2 76
T-1-6
Size
Mode
C5051 C5045 MultiMultiCassette purpose Cassette purpose tray tray Color, B/W Color, B/W Color, B/W Color, B/W
25.5 25.5 12.5 10.0 25.5 25.5 12.5 10.0 19.5 19.5 9.8 9.8 6.5 19.5 19.5 9.8 9.8 25.5 25.5 12.5 10.0 25.5 25.5 12.5 10.0 19.5 19.5 9.8 9.8 6.5 19.5 19.5 9.8 9.8 T-1-7
Plain paper 1-sided Thick paper A3 / LDR Plain paper 2-sided Thick paper
Size
Mode
C5051 C5045 MultiMultiCassette purpose Cassette purpose tray tray Color, B/W Color, B/W Color, B/W Color, B/W
51.0 51.0 25.5 20.0 51.0 51.0 25.5 20.0 31.0 31.0 15.5 15.5 10.0 31.0 31.0 15.5 15.5 45.0 45.0 25.5 20 45.0 45.0 25.5 20 31.0 31.0 15.5 15.5 10.0 31.0 31.0 15.5 15.5 -
ImageRUNNER ADVANCE C5030 MultiMultiCassette purpose Cassette purpose tray tray Color, B/W Color, B/W Color, B/W Color, B/W C5035
35.0 35.0 17.0 17.0 35.0 35.0 17.0 17.0 17.5 17.5 8.5 8.5 17.5 17.5 8.5 8.5 20.0 20.0 10.0 10.0 10.0 20.0 20.0 10.0 10.0 13.0 13.0 6.5 6.5 6.5 13.0 13.0 6.5 6.5 30.0 30.0 17.0 17.0 30.0 30.0 17.0 17.0 17.5 17.5 8.5 8.5 17.5 17.5 8.5 8.5 20.0 20.0 10.0 10.0 10.0 20.0 20.0 10.0 10.0 13.0 13.0 6.5 6.5 6.5 13.0 13.0 6.5 6.5 T-1-8
1-sided Thick paper A4 / LTR Plain paper 2-sided Thick paper Plain paper 1-sided Thick paper A3 / LDR Plain paper 2-sided Thick paper
Plain paper 1-sided Thick paper A4 / LTR Plain paper 2-sided Thick paper
1-7
1
1-8
Paper type
Usable paper types are shown on the next page and later. For irregular-sized paper, refer to the table below. Type
Irregular size 1-1 Irregular size 1-2 Irregular size 1-3 Irregular size 1-4 Irregular size 2-1 Irregular size 2-2 Irregular size 2-3 Irregular size 2-4 Irregular size 3-1 Irregular size 3-2 Irregular size 3-3 Irregular size 3-4 Irregular size 4-1 Irregular size 4-2 Irregular size 4-3 Irregular size 4-4 Irregular size 5
Pickup
Paper type(g/ m2) Width direction (mm)
139.7 to 181.9 182.0 to 210.0 210.1 to 297.0 297.1 to 330.2 139.7 to 330.2
T-1-9
Size
A4, LTR B4, A4R, A5R, B5, B5R, EXEC, LGL, LTRR, STMTR, 16K, 16KR A3, LDR, EXE, 12No18, 8K A5, STMT, SRA3, OFFICIO, E-OFFICIO, B-OFFICIO, M-OFFICIO, A-OFFICIO, A-LTR, A-LTRR, GLTR-R, GLTR, GLGL, AFLS, FLS, Irregular size 1-1, Irregular size 1-2, Irregular size 1-3, Irregular size 1-4, Irregular size 2-1, Irregular size 2-2, Irregular size 2-3, Irregular size 2-4, Irregular size 3-1, Irregular size 3-2, Irregular size 3-3, Irregular size 3-4, Irregular size 4-1, Irregular size 4-2, Irregular size 4-3, Irregular size 4-4, Irregular size 5 EXEC-R A4, LTR
MultiCassette Cassette Cassette Cassette purpose Feeding Feeding 1 2 tray Unit 1 Unit 2
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Paper Deck
Yes No
Plain 1 (52 to 81) Thin, Recycled, Pre-Punched, Color Plain 2 (82 to 105) Bond Heavy 1 (106 to 163) Textured Heavy 2 (164 to 209) Labels, Tab
Yes Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
No No
Transparency
Yes Yes
No Yes
No Yes
No Yes
No Yes
No Yes
1-8
1
1-9
Paper type(g/ m2) Size MultiCassette Cassette Cassette Cassette purpose Feeding Feeding 1 2 tray Unit 1 Unit 2
Yes No No No No
Paper Deck
No
Name of Parts
External View
1
Special paper A4, LTR, B4, Tracing, Coated, A4R, A5R, B5, Washi B5R, EXEC, LGL, LTRR, Heavy 3 (210 STMTR, 16K, to 258) 16KR, A3, LDR, EXE, 12No18, 8K, A5, STMT, SRA3, OFFICIO, E-OFFICIO, B-OFFICIO, M-OFFICIO, A-OFFICIO, A-LTR, A-LTRR, GLTR-R, GLTR, GLGL, AFLS, FLS, F4A, Irregular size 1-1, Irregular size 1-2, Irregular size 1-3, Irregular size 1-4, Irregular size 2-1, Irregular size 2-2, Irregular size 2-3, Irregular size 2-4, Irregular size 3-1, Irregular size 3-2, Irregular size 3-3, Irregular size 3-4, Irregular size 4-1, Irregular size 4-2, Irregular size 4-3, Irregular size 4-4, Irregular size 5 Postcard A6 irregular Envelope COM10, Monarch, ISO-C5, ISO-B5, DL,
11 10 9 8 7 6 5 4 2 12
13
11
F-1-6
[1] [2] [3] [4] [5] [6] [7] Yes Yes No No No Yes* No No No No No No
DADF Main Power Switch Stack Bypass Tray Paper Drawer4 Paper Drawer3 Paper Drawer2 Paper Drawer1
Front Cover Front Upper Cover Output Tray Control Panel Rear Cover Rear Rower Cover Breaker
T-1-10
1-9
1
1-10
[1] [2] [3] [4] [5] [45] [44] [43] [42] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33]
F-1-7
[1] Reversal roller [2] 2-side delivery / delivery unit [3] Secondary delivery roller [4] Second delivery entrance flapper [5] Second delivery flapper [6] Third delivery roller [7] Second / third delivery entrance roller [8] 2-side entrance roller [9] Primary delivery roller [10] Primary delivery flapper
[16] Fixing separration guide [17] Roller pressure [18] Film unit [19] ITB unit [20] Registration roller [21] 2-side delivery lower roller [22] Registration roller [23] [24] [25]
[31] Cassette 2 feeding roller [32] Cassette 2 separation roller [33] Casset 2 pick-up roller [34] Casset pick-up unit [35] Laser scanner unit (BK / C) [36] Laser scanner unit (M / Y)
[41]
Bk
[11] Fixing inner delivery roller [26] [12] Fixing inner delivery [27] opposed roller [13] Fixing unit [28] Cassette 1 separation roller [14] Post-fixing roller [29] Casset 1 pick-up roller [15] 2-side delivery upper [30] Vertical path roller 2 rollerr
[37] Developing unit (Bk) + Drum unit (Bk) Bypass feeding roller [38] Developing unit (C) + Drum unit (C) Bypass pick-up roller [39] Developing unit (M) + Drum unit (M) Bypass separration roller [40] Developing unit (Y) + Drum unit (Y) Vertical path roller 1 [41] ITB cleaning unit Cassette 1 feeding roller [42] Hopper unit (Y) [43] Hopper unit (M) [44] Hopper unit (C) [45] Hopper unit (BK)
[34]
1-10
1
1-11
Operation
Power Switch
Types of power switch
Environmnet Heater Switch Control Panel Power Switch
To turn off the power, turn off the Main Power Switch. (Conventional shutdown sequence
operation is not required.)
After power-OFF (after the Main Power Switch is turned OFF), do not reactivate the Main
Power Switch until a screen disappears.
F-1-8
This machine is equipped with the Main Power Switch, Control Panel Power Switch and Environment Heater Switch. [1] Main Power Switch This switch is used to turn OFF / ON the power of host machine. [2] Control Panel Power Switch This switch is to shift the machine to power-save mode or to restore it to normal mode. [3] Environment Heater Switch Environment Heater Switch is to supply and shut the power to Cassette Heater and Reader Heater.
1-11
1
1-12 Description of Control Panel
Control Panel
iR ADVANCE C5051 / 5045 / 5035 / 5030 Series
1 2
Main Menu
iR ADVANCE C5051 / 5045 / 5035 / 5030 Series
15 14 3 4
9 13 [1] [2] [3] [4] [5] [6] [7] [8] 12 11 10 [9] [10] [11] [12] [13] [14] [15] 9 8 7 6 5
F-1-9
Control Panel Power Switch USB Insertion Slot Settings / Registration Key Counter Check Key Operation Pen Main Power Lamp Error Lamp Execution / Memory Lamp
ID (authentication) Key Touch Panel Display Screen Brightness Adjustment Dial FAX Volume Adjustment Key Status Check / Stop Key Custom Menu Key Main Menu Key
F-1-10
Copy Scan and Send Scan and Store Access Stored Files Fax / I-Fax Inbox
1-12
1
1-13
Difference of main menu
iRC 3380 / 2880 Series
Copy Send Mail BOX
Settings/Registration
Select an item to set
TOP
1 2 3 4 5
Log in
OK
F-1-11
[4] [5]
Management Settings
T-1-12
1-13
1
1-14 Service Mode
It is possible to browse the usage method of service mode items in service mode. Following is the changed and added items compared to a conventional machine.
1) Press [i] 4) A detailed explanation on the item will be displayed (usage scenarios, instructions, settings range, etc.). 2) Minor item titles are displayed.
F-1-12
[MODELIST] : This mode is newly added from this machine. This mode has the function to browse the usage method of service mode items etc. New functions described later are available in MODELIST mode. [MODELIST CLASSIC] : This is the same mode with a conventional machine. New functions described later are not available in MODELIST CLASSIC mode. When [MODELIST] or [MODELIST CLASSIC] is pressed, initial screen of each mode is displayed.
3) Select the desired minor item and press [i]
F-1-13
Service mode contents can be displayed in J / E / F / I / G / S. Alike other system software, service mode contents can be upgrade with SST.
1-14
1
1-15
Enhancement of I/O information
This mode is to check the signal input / output status of used electrical parts (sensor / motor / fan etc.). Searchability for target electrical parts has been improved in COPIER > I / O. In addition, it is possible to check the signal input / output status on a screen.
Electrical parts classification 1) Press the button. Which button to press, will depend on which electrical parts intended and its device classification. For instance, if the host machine uses paper pass detection sensor, then press the button on the "COPIER" and "P-Sensor" position. Device classification
2) Then the selected electrical parts classification's mark, name, port number and 0/1 content will appear.
3) If the "i" button is pressed, the screen displaying the electrical parts array will appear.
F-1-14
1-15
1
1-16
Subdivide COPIER > OPTION > BODY items
COPIER FEEDER SORTER BOARD DISPLAY I/O ADJUST FUNCTION OPTION TEST COUNTER BODY COPIER FEEDER SORTER BOARD DISPLAY I/O ADJUST FUNCTION OPTION TEST COUNTER FNC-SW DSPLY-SW NETWORK SOUND ENV-SET CLEANING FEED-SW ING-SPD ING-RDR ING-MCON ING-LSR ING-DEV ING-TR ING-FIX CUSTOM
F-1-15
Details
Noise related Network setting, IFAX, SEND, E-RDS etc. For individual measure
T-1-13
Security measure
To prevent illegal access to service mode, a password can be specified. Related service mode COPIER > OPTION > FNC-SW > PSWD-SW (level 1) Password type setting when entering the service mode <Setting range> 0: No password [Default] 1: Service engineer 2: System administrator + Service engineer
With current machines, it is quite difficult to find out the target item since there are large number of items in COPER > OPTION > BODY (related to host machine specification). With this machine, all items in BODY are classified into 15 categories by usage to reach a target item. Middle category classification
Function switch
Details
Language, cassette, paper type, NAVI / DA connection, count up specification, original size detection, dust detection level UI display related Fixing related Primary transfer, secondary transfer, ITB Development related Laser, latent image related Reader, ADF image related MN-CON image related and image related items other than above Down sequence Cleaning of Charging Assembly / Drum / Transfer Roller / ITB etc. Temperature / Humidity, Environment Heater / due condensation / log acquisition Stack performance, motor speed fine-adjustment, delivery function etc.
Display switch / display timing Image related (fixing) Image related (transfer) Image related (development) Image related (laser / latent) Image related (reader / ADF) Image related (controller, others) Image quality / copy speed Cleaning Environment settings Feeding (pickup / delivery)
DSPLY-SW IMG-FIX IMG-TR IMG-DEV IMG-LSR IMG-RDR IMG-MCON IMG-SPD CLEANING ENV-SET FEED-SW
1-16
1
1-17
Display I/O Adjust Function Option Test Counter
<VERSION > DC-CON R-CON PANEL FEEDER SORTER NIB DECK MN-CONT
<1/ 8>
<LEVEL 1 >
i
Display I/O Adjust Function Option Test Counter
<VERSION > LANG-CS LANG-DA LANG-EL LANG-ES LANG-ET LANG-FI LANG-HU LANG-KO
<1/ 2>
<LEVEL 2 >
i
F-1-16
1-17
Technology
Basic Configuration Controller System Laser Exposure System Image Formation System Fixing System Pickup Feed System MEAP Embedded RDS
2
2-2
Basic Configuration
Functional Configuration
The machine may broadly be divided into the following functional system blocks; document exposure system block, controller system block, laser exposure system block, image formation system block, fixing system block and pickup/feed system block.
Document exposure system Reader controller Controller system HDD Option board Main controller 1/2 DC controller Delivery Duplexing feed Fixing system Fixing Image formation system ITB Transfer CCD Exposure lamp
Basic sequence
Sequence at Power-On
Reader
Main power switch ON SREADY Reader Motor Scanning Lamp HP Sensor Optical unit position HP (Shading position) HP (Shading position)
Forwarding Backwarding Forwarding Backwarding
SSTBY
Shift shading Fixing shading White plate dust detection control Shading correction
Printer Unit
Power ON WMUP Fixing heater: 100 degree C Engage WMUPR PSTBY Fixing heater: 160 degree C(51/45ppm machine) 135 degree C(35/30ppm machine)
Laser exposure system Laser scanner unit1 Laser scanner unit2 Cassette1 Flow of paper Flow of signal Laser beam Cassette2
Auto adjustment [1] [2] [3] [4] [5] [6] [7] [8] [9]
F-2-1 F-2-3
Secondary transfer ATVC Patch sensor correction control Discharge current correction Drum thickness detection Primary transfer ATVC Color displacement correction control ARCDAT control ATR control Secondary transfer clearning control
2-2
2
2-3
Period Definition
SREADY (Scanner Ready) SSTBY (Scanner Standby) WMUP (Warm-up) WMUPR (Warm-up Rotation) PSTBY (Printer Standby)
Definition
An interval in which the shading correction is executed after the Start key is pressed. An interval between the completion of the shading correction and switching the Start key ON / turning the main power OFF. An interval in which the drive system stops, and it ends when the completion requirements of the fixing assembly startup is fulfilled. An interval in which the drive system starts, and the bias adjustment is executed. An interval in which the copy/print request signal can be accepted.
T-2-1
Print sequence
Reader
Start Key ON SSTBY SREADY SCRW Forwarding Backwarding Backwarding Backwarding Forwarding ON HP (Shading) End of the image Stream reading position ON HP (Shading)
F-2-4
Printer
Start key ON PSTBY Target temperature Fixing motor(M21) Fixing heater(H3) Auto adjustment The following adjustments to work, depending on the status of the product. [1] Discharge current corrections [2] Patch sensor correction control [3] ATR control [4] Primary transfer ATVC control [5] Secondary transfer ATVC control [6] Secondary transfer clearning [7] D-max control [8] ARCDAT control [9] D-Half control [10] Color displacement correction control
F-2-5
PINTR
PRINT Fixing heater: 175 degree C(51/45ppm machine) 155 degree C(35/30ppm machine)
LSTR
PSTBY
disengage
2-3
2
2-4
Period Definition
SREADY (Scanner Ready) SSTBY (Scanner Standby) PSTBY (Print Standby State) PRINTR (Printer Intial Rotation) PRINT LSTR (Last Rotation)
Definition
An interval in which the shading correction is executed after the Start key is pressed. An interval between the completion of the shading correction and switching the Start key ON / turning the main power OFF. An interval in which the copy / print request signal can be accepted. An interval between the reception of the print request signal and the state the image signal is sent. An interval in which all toner is transferred on the paper, and the paper is delivered. An interval between the completion of the paper delivery and the stop of all drives.
T-2-2
2-4
2
2-5
Controller System
Overview
Features
Using a new controller enables high speed PDL processing, high image quality and high functionality.
Specifications / configuration
PCBs
F-2-8
Parts name
Main Controller PCB 1 Riser PCB Main Controller PCB 2
F-2-6
Main controller PCB 1 controls the entire system. Main controller PCB 2 mainly controls image processing. Main controller PCBs 1 and 2 are connected through the riser PCB. This configuration improves installability / removability of the main controller PCBs. (Slot-in / out)
Main controller CPU: 1.2GHz, Control of the entire system PCB 1 Various controls (memory, control panel, electric power, voice), I/Fs (PCI, USB (host), RTC Flash PCB Boot program TPM PCB To generate and save encryption key Available only when TPM settings is ON: Management Settings > Data Management > TPM Settings (default: OFF) Not available with China models Main controller CPU: 400 MHz, Image control PCB 2 Various image processing (color space conversion, enlarge, reduction, rotation, composition, compression, rasterizing, resolution conversion, image binarization), delay memory control between drums, HDD control, I/Fs (reader, FAX, USB (device)) Bypass PCB Internal bus connection Remove this PCB when using ColorPASS-GX300 (server type) or imagePASS-B1 (to be attached to the main unit) and install the open I/F PCB. Riser PCB I/F (main controller 1 - 2, main controller - HDD, main controller - DC controller) HDD 2.5 inch SATA I/F Standard: 80 GB Up to 2 HDDs can be mounted in the case of mirroring configuration. BOX data, Address book, security information (password, certificate) Op.: 2.5 inch / 80GB HDD-C1, 2.5 inch / 250 GB HDD-D1
T-2-3
F-2-7
2-5
2
2-6
Memory
Main controller PCB 1
J2032 J2031
BAT1
J12
BAT1
F-2-9
Parts name
DDR2-SDRAM
2 slot / 1GB (standard) J2031: 512 MB J2032: 512 MB Clock frequency: 333 MHz Used for saving image, program data Lithium battery (BAT1)) For RTC Life: approx. 10 years
T-2-4
Parts name
DDR2-SDRAM (M1)
1 GB (standard) / clock frequency: 200MHz Rasterizing, rendering, resolution conversion, coding / decoding DDR2-SDRAM (M0) 512 MB (standard / Op.*) / clock frequency: 200MHz Product name: Additional Memory Type B (512MB) Rasterizing, rendering, resolution conversion, coding / decoding To be used when using the following options: PS Printer Kit-AE1, Direct Print Kit (for PDF / XPS)-H1, imagePASS-B1, ColorPASS-GX300 DDR2-SDRAM (P) 512 MB (standard) / clock frequency: 200MHz Print image processing, delay processing between drums SRAM 16 Mbit To save data in Settings / Registration Mode / Service Mode and image data management information in HDD Lithium battery (BAT1) For SRAM backup, Life: approx. 10 years
T-2-5
2-6
2
2-7
I/F, connector
Main controller PCB 1
Voice UI J1003 Mini-USB J1007 J1002 External I/F Internal I/F Bypass I/F / open I/F
Reader J3003
Fan J1015 LAN J1017 USB (H) J1021 J1022 TPM PCI J1026 J1027 CC-VI Coin
F-2-11
No.
Function, specifications
No.
Function, specifications
J1007 Mini-USB I/F (Op.) Connect USB Device Port-B1 USB Device Port-B1 is required when using Mobile Connect Kit-A1 (sold separately). J1015 Fan I/F J1025 PCI expansion PCB I/F (Op.) J1017 LAN I/F J1026 I/F for control interface kit (Op.) 1000BASE-T / 100BASE-TX / 10BASE-T Also to be used as I/F for imagePASS-B1 J1027 I/F for card reader, I/F for serial interface / ColorPASS-GX300 (Op.) kit, I/F for coin manager (all Op.) J1019 Riser PCB I/F
T-2-6
J1020 Flash PCB I/F J1021 USB I/F (Host) *1 For MEAP, For USB keyboard (Op.) J1022 TPM PCB I/F
Jack No.
J14 J16
Function, specifications
Riser PCB I/F Mini-USB I/F for 2 to 4-lines FAX Product name: Advanced G3 2nd Line Fax Board-AE1, Advanced G3 3rd / 4th Line Fax Board-AE1 FAX-USB I/F for 1-line FAX Product name: Advanced G3 FAX Board-AE1 Image analysis PCB I/F Product name: Image Data Analyzer Board-A1 Bypass PCB I/F Mount the open I/F PCB when using ColorPASS-GX300 / imagePASS-B1 Reader I/F
T-2-7
2-7
2
2-8
Function expansion options
Main controller PCB1
Voice Operation/ Voice Guidance PCB
IPSec PCB
IPSec PCB F link PCB (main) Wireless LAN PCB Expansion Bus PCB
F-2-13
Name
Voice operation PCB Voice guidance PCB Expansion Bus PCB
Name
Open I/F PCB F link PCB (main) F link PCB (sub) Image analysis PCB
Product name: Image Data Analyzer Board-A1 Scan protection for output original (Copy / SEND / BOX)
T-2-9
IPSec PCB
2-8
2
2-9 HDD
The partitions for Advanced Box and the distribution server are added. User Box (same as the existing machine) area is 23GB and Advanced Box area is 9GB. Advanced Box area can be increased by installing the high-capacity HDD option.
- Initialization process of hardware
Boot sequence
[ ]: program storage location
FSTDEV TMP_GEN TMP_PSS TMP_FAX APL_SEND APL_MEAP APL_GEN APL_KEEP APL_LOG IMG_MNG PDLDEV FSTCDEV THUMDEV BOOTDEV CRBDEV APL_CDS
Image data (User Box) Universal data (temporary file) For PDL spooling FAX data Address book, filter MEAP application Universal data MEAP saving data System log Text management table PDL-related file (font, registration form, etc.) Job archiving (chasing) Thumbnail System software (System, language, RUI, etc.) For Advanced Box For distribution server
F-2-15
- Starting application
2-9
2
2-10
Related Error Codes (major error codes): Error Code
E602 0001 0002 0006 E604 1024 E613 1024 1536 E748 2010 2011
Shutdown sequence
Error description Before turning OFF the main power switch, it is necessary to perform HDD completion processing (to prevent damage on the HDD), cooling of the internal printer (to prevent fixed toner due to high temperature) and exhaust (to prevent smeared image due to chemical reaction of ozone in the machine and photosensitive drum). This sequential processing is called shutdown sequence and was executed on the legacy models manually (by holding down the power supply switch on the Control Panel for a specific duration). When the main power switch is turned OFF on the main body, Main Controller PCB 1 detects this operation and then the shutdown sequence starts / executes automatically.
Error in HDD Failure in recognizing HDD Boot partition (BOOTDEV) is not found at startup. There is no system software for the main CPU. There is no system software for the sub CPU. Failure in memory (main controller PCB 1) Capacity shortage of DDR2-SDRAM (1GB required) Failure in memory (main controller PCB 2) Capacity shortage of DDR2-SDRAM (M0, M1) (1GB required) Capacity shortage of DDR2-SDRAM (M0, M1) (1.5GB required) Error in board (Flash PCB) IPL (Initial Program Loader) is not found. OS is not found.
T-2-10
2-10
2
2-11
Controls
Flow of Image Data
Copy
To DC Controller HDD Reader
SEND
Network HDD Reader
HDD writing/reading
I/F
HDD writing/reading Image processing Resolution conversion, I mage rotation, JPEG compression/extension LAN Controller
Riser PCB
Riser PCB
Box
To DC Controller F-2-17 HDD FAX
Print
Network To DC Controller I/F HDD writing/reading
HDD
Rendering
Print type image processing Extension processing Tile raster conversion Main Controller PCB 1 Riser PCB Main Controller PCB 2
Image processing Color space conversion, Image 2 level cell, Image multi level cell, Image composition, Resolution conversion, Image rotation, Pixel skipping with 7x7 filter
LAN Controller Main Controller PCB 1 Riser PCB Main Controller PCB 2
F-2-20
F-2-18
2-11
2
2-12 Security features (encryption key and certificate, password protection)
On the Main Controller PCB 1 of the main body, TPM PCB is newly equipped. TPM stands for Trusted Platform Module, and is the chip name which generates and stores the encryption key and has the encryption calculation function for the public key.
Main controller PCB 1 HDD / SRAM
To encrypt or decode the security information, use the TPM key installed in the chip.
TPM PCB
User certificate
F-2-22
It is extremely difficult from the outside to take out the TPM key installed in the chip. Therefore, even the following cases occur, the security information in the main body can be
Removable
protected securely.
TPM
HDD or Main Controller PCB is taken out System of the main body is intruded through the network
To enable this function, setting is required in Settings / Registration mode.
F-2-21
TPM PCB can protect the security information (password, certificate and encryption key) stored in the HDD and SRAM. Set / registered / saved data other than the security information is not protected.
Management Settings > Data Management > TPM Settings ON (default: OFF)
2-12
2
2-13
Operation overview (When the TPM setting is ON)
MN-CON 1 TPM PCB TPM key HDD
MN-CON 2 SRAM
Password Certificate Key Password Certificate Key
Caution: To set ON for TPM setting, be sure to instruct the following points to the user.
Be sure to backup the TPM key immediately after selecting ON Keep the password at the time of backup Be sure not to lose the USB memory that has saved the backup file of TPM key.
Common key
F-2-23
In the case of replacing the TPM PCB due to failure, it is necessary to restore the TPM key after replacement. Unless restoration is implemented, security information (password, certificate and encryption key) cannot be used. If restore work could not be performed due to lost of USB memory, etc., it is necessary to first execute [Initialize All Data / Settings] to enable the TPM feature again. This is due to security issue to keep the setup/register data unchanged.
Security information (password, certificate and encryption key to be used for various applications) is linked with the common key, so it is encrypted and stored in the HDD / SRAM. Without the common key, decoding is disabled. When the TPM setting is set to ON, the common key itself is encrypted. The common key is linked with the TPM key. Without the TPM key, decoding is disabled. It is extremely difficult to take out the TPM key from the outside. TPM PCB can be used on this machine only, so it cannot be used on the other machines. (E746 occurs) Related Error Codes: E746 (Error in encryption)
2-13
2
2-14
1. Enable the feature Setting of system management encryption number Recommend the user (administrator) to set up the system management encryption number in advance. Backup of TPM key is performed after selecting ON for TPM settings, however, backup is available only once. Therefore, it is efficient to set the system management encryption number as a mean to avoid incidents, such as when backup file is obtained by anyone other than the administrator, etc. 2. Backup of TPM key Only the USB memory (supported system file: FAT32) can be used as the device for saving backup file of TPM key. Data size of this file is several MB.
F-2-26
1) Connect the USB memory to the main unit. There are two USB I/F (host): one at the side of the control panel and the other at the side of main controller PCB 1. Caution: Be sure to connect only one USB memory, otherwise, a message indicating backup failure is shown if performing backup while 2 or more USB memories are connected.
1) Select the following: Management Settings > Data Management > TPM Setting; and select ON for TPM setting.
MEMO: The USB memory can save multiple backup files for TPM key.
2) Select the following: Management setting > Data management > TPM setting; and click [Backup TPM key].
F-2-24
F-2-25
Encryption / decoding feature of security information is enabled after rebooting the machine.
F-2-27
2-14
2
2-15
3) Click [Password] to enter the password (4 to 12-digit), and then enter the password to confirm the entry. Caution: Cause of backup failure In the case of the following, a message is shown indicating backup failure and its cause. Be sure to perform appropriate remedy.
USB memory is not connected 2 or more USB memories are connected Memory capacity of USB memory is insufficient Connected USB memory is read-only (writing is prohibited) There is no key
Caution:
F-2-28
Storage of USB memory Be sure to instruct the following points to the user.
The USB memory should be securely kept/managed. Do not put the backup file of TPM key stored in the USB memory to any location
accessible by general public, such as on the server.
MEMO: Backup file name of TPM key Serial No. is automatically given as the backup file name.
F-2-29
5) Once the backup completion screen is shown, click [OK] and remove the USB memory.
2-15
2
2-16
3. Restore of TPM key Procedure is about the same as the backup work. Difference between restore work and backup work: Rebooting is necessary (turn OFF and then ON the main power) after completion of restore work. 1) Connect the USB memory that saves TPM key. 2) Select the following: Management setting > Data management > TPM setting; and click [Restore TPM key]. Caution: Cause of restore failure In the case of the following, a message is shown indicating restore failure and its cause. Be sure to perform appropriate remedy.
USB memory is not connected. 2 or more USB memories are connected. Connected USB memory is with security feature. There is no TPM key in the USB memory. The TPM key in the USB memory is not appropriate for the target machine. Mismatched entry password [Initialize All Data/Setting] is executed after obtaining backup of TPM key. The SRAM (main controller PCB 1) or the HDD is faulty.
F-2-30
3) Enter the password that has been specified at backup work. 4) Once the screen to confirm restore start is shown, click [OK] to start restore. 5) Once the restore completion screen is shown, click [OK] and remove the USB memory, and turn OFF and then ON the main power switch.
2-16
2
2-17
4. Disable the feature To set OFF for the TPM setting, execute [Initialize All Data / Settings].
Application/ feature
BOX
Security information
Password for BOX Password for encryption of BOX backup Password of SMB server for BOX backup Password for FAX Box Password for backup of Advanced Box Password of SMB server for backup of Advanced Box Password for File destination in Address Book Password of LDAP server Password of POP3 server Password for PDF with time stamp Password of Adobe ES Rights Management server Password for address (destination) registration Password for Service Mode Password for IPP authentication Password for FTP authentication User name and password of Proxy authentication client Login password of NetWare print server Policy common key for IPSec User name and password for PEAP / TTLS authentication Password for login to AeAgent UI Login user information of device Password for FAX reception Department management data (including administrator password) Authentication key and encryption key for SNMPv3 Path key for Bluetooth security mode Device key pair (SS, AMS)
Saving destination
HDD SRAM SRAM HDD SRAM SRAM HDD SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM HDD SRAM SRAM SRAM SRAM HDD HDD HDD
T-2-12
Super BOX
Send
F-2-31
UI Network
0032
Others
0033
0034
Encryption key MIB Bluetooth Certificate / SSL, AMS private (secret) Signature SEND User key pair key Others
2-17
2
2-18 High capacity HDD (Option)
The HDD capacity mounted on this machine is 80GB as standard. Mounting a 2.5 inch / 250GB HDD-D1 (option) makes 250GB in HDD capacity. High capacity is required in the case of saving large amounts of data with Advanced Box. Mounting this option increases capacity for Advanced Box. 9GB: in the case of 80GB HDD capacity 114GB: in the case of 250GB HDD capacity
80 GB
Standard
FSTDEV TMP_GEN TMP_PSS TMP_FAX APL_SEND APL_MEAP APL_GEN APL_KEEP APL_LOG IMG_MNG PDLDEV FSTCDEV THUMDEV BOOTDEV CRBDEV APL_CDS
Image data (Box, etc.) Universal data (temporary file) For PDL spooling FAX data Address book, filter MEAP application Universal data MEAP saving data System log Text management table PDL-related file (font, registration form, etc.) Job archiving (chasing) Thumbnail System software (System, language, RUI, etc.) For Advanced Box For distribution server
F-2-32
Backup (HDD2)
80 GB
Option 2.5inch/80GB HDD - C1
Master (HDD1)
250 GB
Option Backup (HDD2)
Ch B
250 GB
Option 2.5inch/250GB HDD - D1
F-2-33
Although simple calculation says: 250GB - 80GB = 170GB, it requires 20% of snapshot area and the data area to be used for internal processing in the system. Therefore, 114GB can be actually used for text storage area.
Mirroring PCB controls reading / writing timing of HDD data. LED PCB makes the LED show operation status of the HDDs.
Ch B (HDD2)
Ch A (HDD1)
F-2-34
2-18
2
2-19
To start using this feature (installation)
Install the mirroring PCB and LED PCB for HDD1 HDD1 is connected to Ch A on the mirroring PCB Slot.2 (HDD2) Slot.1 (HDD1) CH B CH A
Rebuild progress is shown in a massage at the status line on the control panel. Copying hard disk data... xx% MEMO:
This machine can be used even during rebuild process (operation is performed with HDD1) The HDD will not be damaged even if turning OFF the power during rebuild process. Rebuild is resumed once the power is turned ON the next time. This does not apply in the case of blackout or disconnecting the power code during rebuild process
Turn ON the main power (Lv.1) COPIER > OPTION > FNC-SW > W/RAID ---> 1 This Service Mode needs to be specified before installing the 2nd HDD.
Install HDD2
Turn ON the main power The storage data of the 1st HDD is automatically copied to the 2nd HDD (this operation is called Rebuild.
Start Rebuild
Complete Rebuild
Time needed: 80 GB HDD --- Approx. 20 minutes 250GB HDD ---Approx. 60 minutes
F-2-35
2-19
2
2-20
HDD reading / writing operation
At reading: Data is read by HDD1 (master HDD) only Main controller PCB 2 Mirroring PCB At writing: The same data is written to each HDD at the same timing Main controller PCB 2 Mirroring PCB
Remove the HDD after the close of work to be kept in a safe. Install the HDD at the start of work. Make the HDD locked during operation.
HDD 1
HDD 2
HDD 1
HDD 2
F-2-36
The ACT LED (green) on the LED PCB is lighted up / blinking if reading / writing to each HDD is performed properly. In the case of failure:
The LED (red) on the LED PCB is blinking. If only one HDD is faulty, the operation is
continued by the other HDD.
If both two HDDs are faulty, E602 error is shown on the control panel to stop the operation.
MEMO:
HDD 2 (Ch B) Green LED Red LED
----A ------- / A --- / A --------A --B
T-2-13
To use this option, no setting is required with the software. The user needs to prepare a key because there is no key with this kit.
2-20
2
2-21 Software Counter
Count-up timing differs depending on the following conditions.
Fan
Overview
Fan Layout
Controller fan 3(FM13) HDD cooling fan(FM14) Controller fan 1(FM11) Controller fan 2(FM12) Fixing heat exhaust fan 2(FM2) Fixing heat exhaust fan 1(FM1)
T-2-14
Print mode (1-sided / 2nd side of 2-sided, 1st side of 2-sided) Delivery position (built-in tray, finisher)
Delivery position
1 Host machine First delivery tray Second delivery tray Third delivery tray 2 In case finisher is installed.
Print mode 1st side of 2-sided 1-side / 2nd side of 1-sided Count-up timing
First Delivery Sensor (PS41) Second Delivery Sensor (PS42) Third Delivery Sensor (PS43) Finisher Delivery Sensor Duplex Paper Sensor (PS38)
Fixing cooling fan (rear)(FM6) Secondary transfer exhaust fan(FM8) Fixing cooling fan (front)(FM5) Process cartridge fan (rear)(FM4)
F-2-38
2-21
2
2-22
No.
FM1 FM2 FM3 FM4 FM5 FM6 FM7 FM8 FM9 FM10 FM11 FM12 FM13 FM14
Name
Fixing Exhaust Fan 1 Fixing Exhaust Fan 2 Power Cooling Fan Process Cartridge Fan (rear) Fixing Cooling Fan (front) Fixing Cooling Fan (rear) Delivery Fan 1 Secondary Transfer Delivery Fan Delivery Fan 2 Process Cartridge Fan (front) Controller Fan 1 Controller Fan 2 Controller Fan 3 HDD Cooling Fan
Function
Heat exhaustion around Fixing Assembly Heat exhaustion around Fixing Assembly Cooling down of Power Supply Assembly Heat exhaustion around Process Cartridge Cooling down of Fixing Assembly Cooling down of Fixing Assembly Preventing delivery paper adhesion Heat exhaustion around Secondary Transfer Unit Preventing delivery paper adhesion Heat exhaustion around Process Cartridge Cooling down of Controller Cooling down of Controller Cooling down of Controller Cooling down of HDD
Error code
E805-0000 E805-0001 E804 E807-0000
Air Flow Air flow around the Main Controller and the Power Supply
T-2-15
Toner Filter is installed at the Ventilation Hole of the Process Cartridge Fan (rear) (FM4).
F-2-39
2-22
2
2-23
Air flow of fixing system Air flow around the operation system
F-2-40
F-2-41
2-23
2
2-24
2-speed control Among the fans installed in this machine, the Power Cooling Fan (FM3) and the Delivery Fan 1 (FM7) perform the 2-speed control. Rotation speed is switched when the Voltage switching PCB of Fan switches the voltage.
DC controller PCB DC driver PCB 24V Drive signal CPU Half-speed signal 13V 24V/ 12V/ 0V
Main switch Fixing heater TP AC interlock switch 3VR 12V power supply PCB 24V power supply PCB 2 12VA2 12VA1 12VB1 All-night 3VR power PCB 3VR Main controller PCB 2 24VA 5VB 24VA 12VB1 5VA 3VA Laser driver PCB
F-2-42
Operation Sequence
Fan name Process Cartridge Fan (front) Process Cartridge Fan (rear) Fixing Exhaust Fan 1 Fixing Exhaust Fan 2 Fixing Cooling Fan (front) Fixing Cooling Fan (rear) Secondary Transfer Exhaust Fan Delivery Fan 1 Delivery Fan 2 Power Cooling fan Controller Fan 1 Controller Fan 2 Controller Fan 3 HDD Cooling Fan Controller Control Controller Control Controller Control Controller Control : Full speed : Half speed
F-2-43
Right switch
AC driver PCB
24V power supply PCB 1 Deck heater Cassette pedestal heater Cassette heater Drum heater Reader heater
24VC 24VB1 24VB2 24VB3 24V2 12VB2 24V1 12VA3 Reader Controller PCB Control panel
HVT 1 PCB HVT 2 PCB HVT 3 PCB Drum driver PCB Cassette feed driver PCB Pickup feed driver PCB
Option
F-2-44
2-24
2
2-25
Power supply of Reader Unit
24V 24V 5V 24V Printer 12V Reader Controller PCB 24V 6V 4.5V 24V 6V 4.5V 24V 5V Motor Fan Sensor CMOS PCB Reader 24V LED Lamp Unit LED Lamp Unit Staple FinisherC1
24V
Built-in wiring
Connector inside the cover is used for the connection with DADF Unit and the 2-Cassette Pedestal. External Cable is used for the connection with the Side Paper Deck and the Finisher.
2-25
2
2-26
Power save function
Standby
Job end
Deep Sleep
F-2-47
* When options are installed, the machine does not enter Sleep Standby but enters Sleep1 mode. Standby In this mode, the machine is either operating or ready to start operation immediately and all power is supplied. Sleep Standby or Sleep1 Control panel is turned OFF. Power supply other than the control panel is the same with Standby mode. Deep Sleep 3V for all-night power PCB is only supplied.
Print job is submitted : The machine moves to Sleep Standby or Sleep1 mode. Control panel power switch is pressed : The machine moves to Standby mode..
2-26
2
2-27
Service Operations
When Replacing Parts
Parts name
HDD
Remedy
Reference
"Backup of the set/registered data HDD format Downloading system software Restoring the backup data Executing Auto Adjust Gradation (Full Adjust)" Main Controller PCB 1 Transferring the parts from old PCB to new PCB Main Controller PCB 2 "Backup of the set/registered data Transferring the parts from old PCB to new PCB Restoring the backup data" TPM PCB When TPM setting is ON:Restoring the TPM key
T-2-16
Consumables
No.
1
Parts Name
Toner filter
Parts number
FC6-9817
Qty
1
Execution timing
100k(B / W) 25k(CL)
Remark
T-2-17
2-27
2
2-28
Reflection Mirror
Skew Correction Motor Bk (M34) Skew Correction Motor Y (M31) Imaging Lens Skew Correction Motor M (M32)
Y
Bk
Bk
Laser Driver PCB C (UN15) Laser Driver PCB Bk (UN14) BD Sensor (Y, M)
Scanner Mirror
Scanner Mirror
This machine emits the laser to the image area on the drum negatively-charged.
Image area Non-image area Non-image area
2-28
2
2-29 Specification
Item
Wavelength Laser type Laser output Number of laser scanner unit Number of laser light
Description
775 to 800nm Red color laser (non-visible light) 10mW 2 imageRUNNER ADVANCE C5051 / C5045: 4 beam for each color imageRUNNER ADVANCE C5035 / C5030: 2 beam for each color Resolution 1200dpi Motor type Brushless motor Number of motor rotation imageRUNNER ADVANCE C5051 / C5045: Approx. 29100rpm imageRUNNER ADVANCE C5035 / C5030: Approx. 37800rpm Number of scanner mirror facet 6 facet (phi 40) Control list Laser ON / OFF control Horizontal scanning synchronous control Vertical scanning synchronous control APC control Laser scanner motor control BD correction control Laser shutter control Image tilt correction control
T-2-18
2-29
2
2-30
Various Controls
Overview
Item
Laser ON / OFF control Horizontal scanning synchronous control Vertical scanning synchronous control APC control Laser Scanner Motor Control BD correction control Laser shutter control Image tilt correction control
Operation description
Laser light is turned ON / OFF according to the combination of laser control signal To align the writing start position in horizontal scanning direction. To align the writing start position in vertical scanning direction. To make the laser light per 1 line consistent amount. To rotate the scanner mirror by the specified speed. To correct the gap BD timing gap due to the angle variation of Scanner Mirror. To prevent the laser light from being emitted to the machine inside. To correct the image tilt in vertical scanning direction (this control is operated based on the result of color displacement correction control).
T-2-19
Scanner Motor
Scanner Motor
BD correction control
2-30
2
2-31 Laser ON / OFF control
Purpose
Laser light is turned ON / OFF according to the combination of laser control signals.
Execution timing
After the power ON
Execution timing
Per 1 line
Control detail
DC Controller switches the 4 modes (forcible OFF mode, APC mode, Print mode and standby mode) according to the laser control signal.
Execution time
Approx. 7.5s
Control detail
Laser control signal DC Controller (UN1) Video signal Laser Driver PCB Scanner mirror Laser beam
1) DC Controller forcibly emits the laser diode on M-laser driver PCB by setting the laser control signal of M -laser to APC mode. Also, DC controller forcibly emits the laser diode of Bk laser driver PCB by setting the Bk laser control signal to APC mode. 2) Concerning the laser beam of M laser, there is a BD sensor (Y, M) on the scanning light path and the laser bean is emitted to the BD sensor (Y, M). Regarding the laser beam of Bk laser, there is a BD sensor (C, Bk) on the scanning light path and the laser beam is emitted
F-2-52
to the BD sensor (C, Bk) as well. 3) Two BD sensors detect the laser beam, create the BD signal (BD_YM, BD_CBk) and send it to the DC controller. 4) DC Controller executes synchronous control based on this signal and sends the standard BD signal to Main Controller as a horizontal scanning synchronous signal (BD) per 1 line. 5) When Main Controller receives those signals, it outputs the video signal (VDO_Y, VDO_M,
Mode
Forcible OFF mode APC mode Print mode Standby mode
Laser status
OFF ON ON / OFF OFF
Remark
Light intensity setting decided on APC is cleared. Laser light intensity adjustment Laser is emitted according to the video signal. Host machine is in standby status.
T-2-20
VOD_C, VDO_Bk) to DC Controller. As a result of this, the Laser Driver emits the laser beam from the specified position for each line.
Image formation Print instruction ready timing PSTBY LaserA LaserB LaserC LaserD Mode name Standby mode APC mode PINTR PRINT At 1st line (APC) At 2nd line (APC) At 3rd line (APC) At 4th line (APC) APC mode / Print mode Forcible Standby mode OFF mode
F-2-53
LSTR
PSTBY
2-31
2
2-32
Laser Scanner Unit 1 VDO_Y BD_YM Y Laser Driver PCB BD Sensor (Y, M) Y Laser
VDO_M
M Laser
Execution timing
Per printing
Main Controller
Laser Scanner Unit 2 C Laser Driver PCB BD Sensor (C, Bk) C Laser
Execution time
500ms
VDO_C BD_CBk
Control detail
1) When DC Controller receives the print instruction, it detects the reference signal. Based on this signal, it creates the vertical scanning synchronous signal (PVREQ) and
Bk Laser
VDO_Bk
sends to Main Controller. 2) Main Controller is synchronized with PVREQ signal and sends VDO signal to DC Cotnroller. 3) DC Controller creates the laser drive signal based on VDO signal and sends it to the Laser
F-2-54
Reference DB
Scanner Unit. The Laser Scanner Unit conform the image leading edge with the paper leading edge by emitting the laser in this timing.
PVREQ 1) Reference Signal
VDO_Y
VDO
VDO_M
VDO
Main Controller2
Laser
Laser
Laser
Laser
VDO_C
VDO
VDO_Bk
VDO
F-2-55
VDO 2)
3)
F-2-56
2-32
2
2-33
Print instruction Reference signal Video request signal (PVREQ) Video signal (VDO)
Execution timing
Per each line (before image writing)
Execution time
Approx. 2 s
Control details
1) DC Controller outputs the laser control signal to the Laser Driver IC on the Laser Driver PCB. 2) APC mode is specified to the Laser Driver IC and it forcibly emits the laser diode of each color. At the same time, each laser driver IC monitors the laser diode (LD) on the photo diode (PD) and adjusts the output of laser diode until the light intensity becomes consistent amount.
2-33
2
2-34
Laser Scanner Unit 1 Y Laser Y Laser Driver PCB PD LD
Execution timing
At power-ON, per printing
M laser control signal M Laser M Laser Driver PCB PD LD
Execution time
Approx. 3s (at power-ON), approx. 1s (at printing)
Control detail
Laser Scanner Unit 2 C Laser C Laser Driver PCB PD LD
1) DC Controller forcibly rotates the motors in the two Laser Scanner Units. 2) It detects the speed detection signal (FG1 to 2, BD_YM, BD_CBk) and compares the signal with the standard signal in DC Controller and then, controls the acceleration signal (ACC1 to 2) and the deceleration signal (DEC1 to 2) to make the specified speed.
F-2-58
2-34
2
2-35
Laser Scanner Unit 1 ACC1 DEC1 FG1 Scanner Motor (Y, M)
Related error code E100-0100: BD error (laser scanner unit 1) When the Laser Scanner Unit 1 (YM laser) is started or print operation is processing, if the BD signal cannot be detected after the specified time. E100-0300: BD error (laser scanner unit 2) When the Laser Scanner Unit 2 (CBk laser) is started or print operation is processing, if the BD signal cannot be detected after the specified time.
BD_YM
E100-B000: BD error (laser scanner unit 1/2) When the Laser Scanner Unit 1/2 is started or print operation is processing, if the BD cycle cannot be detected after the specified time. E102-0100: EEPROM error (laser scanner unit 1) Reading error of EEPROM on Laser Driver (Y) occurs. E102-0300: EEPROM error (laser scanner unit 2) Reading error of EEPROM on Laser Driver (C) occurs.
DC Controller (UN1)
Laser Scanner Unit 2 ACC2 DEC2 FG2 Scanner Motor (C, Bk)
BD_CBk
F-2-59
2-35
2
2-36 BD correction control
Purpose
This is to correct the displacement of writing start position of each color laser due to the angle variation of scanner mirror facet.
Scanner motor control finish (Constant-speed rotation detection) BD interval measurement START
Execution timing
At power-ON, per printing
Execution time
Within approx. 0.5s or less
Constant interval Constant interval Constant interval Narrow interval BD1 BD2 BD1 BD2 BD1 VDO BD2 VDO BD3 VDO BD4 VDO BD3 BD4 BD3 BD4
Control detail
1) DC Controller measures the BD interval after the constant-speed rotation control of Scanner Motor is completed. 2) DC Controller calculates the correction value according to the gap of BD interval. 3) Based on the foregoing correction value, image writing position is corrected.
END
F-2-60
2-36
2
2-37 Laser shutter control
Purpose
This is to prevent the residue toner from sticking to the dust-prevention glass. Or to prevent the laser light from emitting to the machine inside when the front cover / right cover is opened.
Color Shutter Lever Bk Laser Shutter Bk Shutter Lever Color Laser Shutter
Execution timing
After power-ON
Execution time
Approx. 3s (at power-ON), approx. 1s (when scanner motor is started or cover is opened)
Bk Shutter Cam Drive Shaft Color Shutter Cam Laser Shutter Sensor (PS29) Sensor Lever Front Cover Sensor (PS26) DC Controller (UN1) Right Cover Sensor (PS26)
F-2-61
Control detail
While the Laser Scanner Motor is operating, the Laser Shutter is opened. During other period, the laser shutter is closed. Also, the Front Cover Sensor (PS18) or the Right Cover Sensor (PS20) works together and it stops the output signal of laser driver. At the same time, if the Front Cover or Right Cover is opened, the Shutter is closed and the laser light path is forcibly blocked. Those operations are controlled by the DC Controller.
2-37
2
2-38
Laser shutter position For Bk For color Relation of shutter lever and cam For Bk For color Sensor lever position
(PS29) Close Close Shutter Lever Shutter Cam Laser Shutter Open Close Sensor Lever
Execution timing
At power-ON, per total 360 sheets printing
Execution time
Approx. 3 sec
Control detail
1) DC Controller creates the patch pattern of each color on the ITB. 2) DC Controller compares the patch pattern with the standard value backed up in the DC Controller by reading this patch pattern at the Patch Sensor and detects the color displacement amount.
Open
Open
3) Based on the foregoing detection result, the laser emission position (tilt degree) of Laser Scanner Unit is changed.
F-2-62
Related error code E0112-0000: Laser shutter motor error (not in home position) If the Laser Shutter Sensor (PS29) is not in the home position at initial operation. E0112-0001: Laser shutter motor error (operation failure at shutter close) If the Laser Shutter Sensor (PS29) is not in the home position after approx. 10 sec from the shutter close operation. E0112-0002: Laser shutter motor error (operation failure at shutter open) If the Laser Shutter Sensor (PS29) is still in the home position after approx. 10 sec from the shutter open operation.
2-38
2
2-39
Photosensitive Drum Skew Correction Motor Imaging Lens Cam
Imaging Lens
Skew Correction Motor Imaging Lens Arm Cam Imaging Lens Cam
Before correction
Imaging Lens
Scanner Mirror
Reflection Mirror
Arm
F-2-64
2-39
2
2-40
Service Works
Periodically replaced parts
There is no periodically replaced part.
Consumables
No.
1
Parts Name
Dust-blocking Glass cleaning pad
Parts Number
FL2-9476
Qty
1
Estimated Life
150k
T-2-21
F-2-65
2-40
2
2-41
Specifications
Item
Photosensitive Material Drum O/D of drum Cleaning Process speed
Function/Method
OPC 30mm Cleaning blade imageRUNNER ADVANCE C5051=246mm/s, imageRUNNER ADVANCE C5045=215mm/s, imageRUNNER ADVANCE C5035/5030=160mm/s Mounted with Bk drum as a standard. Assigned as an option for color drums. 1pc (single developing) Dry, 2-component jumping Non-magnetic negative toner Not available 20mm Roller charging 14mm Brush roller imageRUNNER ADVANCE C5051/5045 Bk: approx. 940g (Life: approx. 40k) Color: approx. 590g (Life: approx. 30k) imageRUNNER ADVANCE C5035/5030 Not Available Available
Drum heater Developing assembly Developing cylinder Developing method Toner Toner level detection O/D of cylinder Charging method O/D of roller Cleaning Toner amount (the life value is based on A4 size with 5% image ratio)
ITB unit Y Developing assembly Laser Developing cylinder Charging Photosensitive drum roller drum unit Laser scanner unit 1 Laser Laser Laser M
Patch sensor
Detection of toner container (presence) Availability to replace a toner container (during continuous print) Transfer method ITB unit Material Circumferential length Cleaning Belt displacement correction Primary Transfer method transfer Disengagement mechanism O/D of roller Secondary Transfer method transfer Disengagement mechanism Cleaning O/D of secondary transfer inner roller O/D of secondary transfer outer roller Separating method Patch sensor
Intermediate Transfer (ITB) PI (Polyimide) 893mm Cleaning blade Available (photosensitive sensor) Transfer roller Available 16mm Transfer roller Not available Electrostatic cleaning 16mm 24mm Curvature separation + static eliminator Yes
T-2-22
2-41
2
2-42 Parts configuration
Major Parts
Toner container Y Toner supply assembly M C Bk Transfer assembly
Bk ITB cleaning block
Print process
Delivery Fixing block 8. Fixing Transfer block 9. ITB cleaning 5. Primary transfer Y M C ITB 5. Primary transfer 5. Primary transfer 5. Primary transfer 7. Separation 6. Secondary transfer
Waste toner case Laser scanner unit Developing assembly + Drum unit
F-2-67
1.Pre-exposure M Y 3. Laser exposure Photosensitive Photosensitive drum drum 2. Primary charging Static latent image formation block Drum cleaning block
Pickup Flow of print paper Rotating direction of ITB, photosensitive drum F-2-68
Overview
Static latent 1 Pre-exposure image formation block 2 Primary charging To remove residual charge on the surface of photosensitive drum by exposure of pre-exposure LED light To charge the surface of photosensitive drum to be uniformed negative potential 3 Laser exposure To create static latent image on the surface of photosensitive drum by emitting laser light (image exposure: laser exposure area becomes image area) 4 Developing To attach negatively-charged toner from the developing cylinder to the photosensitive drum by non-negative 2-component jumping developing method. 5 Primary transfer To apply positively-charged potential from the back surface of ITB to transfer toner on the surface of photosensitive drum to ITB. 6 Secondary transfer To apply positively-charged potential to the secondary transfer outer roller to transfer toner on the ITB to the paper. 7 Separation To separate paper from the ITB by curvature separation method. In the case of thin paper which has low elastic force, the static eliminator reduces potential on the surface of paper to separate thin paper more easily. 8 Fixing To fix toner on the paper with heat and pressure. 9 ITB cleaning To remove residual toner on the ITB by the cleaning blade. To remove residual toner on the photosensitive drum by the cleaning blade.
T-2-23
Fixing block ITB cleaning block Drum cleaning 10 Drum cleaning block
2-42
2
2-43
Bias Types
There are the following 8 types biases used on this machine. Bias name
Primary charging bias (DC) Primary charging bias (AC) Flying toner blocking bias (DC) Developing bias (DC) Developing bias (AC) Primary transfer bias Secondary transfer bias Secondary transfer cleaning bias
Bias type
DC AC DC DC AC DC DC DC
Application destination
Primary Charging Roller Toner Blocking Terminal Plate Developing Cylinder Primary Transfer Roller Secondary Transfer Outer Roller
T-2-24
Aforementioned biases are created by 3 HVT and are supplied to the loads used in the printing process.
Developing Developing Developing Developing subhigh subhigh subhigh subhigh voltage voltage voltage voltage PCB Y PCB M PCB C PCB Bk (UN43) (UN44) (UN45) (UN46) Secondary transfer Secondary outer roller transfer inner roller M M C C Bk Bk
Developing cylinder
Developing AC monitoring signal Primary transfer DC Developing AC+DC Charging AC+DC monitoring signal Secondary transfer DC
HVT2 (UN17)
HVT3 (UN18)
DC controller (UN1)
2-43
2
2-44
Controls
Overview
Pre-exposure Pre-exposure control Primary charging Primary charging bias control Discharge current control Primary charging cleaning control Developing/drum Developing bias control ACR (Auto Carrier Refresh) control Toner-blocking bias control Drum (presence) detection New/old detection of drum unit Drum life detection Drum heater control Drum Drum rotation speed control Transfer/separation Primary transfer disengagement control Primary transfer bias control Secondary transfer bias control ITB displacement correction control ITB cleaning control Secondary transfer outer roller cleaning control Drum cleaning Drum cleaning control Image stabilization control Drum film thickness detection D-max control D-half control ARCDAT control PASCAL control Color displacement correction control ATVC control Toner supply Toner cap automatic opening control Toner level detection/toner supply control Waste toner feeding Waste toner full level detection Waste toner case (presence) detection
T-2-25
Pre-exposure
Pre-exposure control
Removing residual potential on the photosensitive drum before executing the primary charging prevents drum ghost during continuous print. According to the command from the DC controller PCB, the pre-exposure unit exposes (emits) LED when the photosensitive drum is rotated. Emitting LED light through the light guide removes residual potential on the photosensitive drum. To make up for the lack of LEDs light intensity, two (2) pre-exposure LEDs are used in total: one at the front of the main unit, and the other at the rear of the main unit.
Pre-exposure LED (rear) (UN24 / 26 /28 / 30)
Light guide
Photosensitive drum
DC controller (UN1)
F-2-70
2-44
2
2-45 Primary charging
Overview
This machine uses the roller charging method for primary transfer. To prevent image fault (white spot/missing image) caused by residual toner, the cleaning brush roller is added to clean the primary charging roller.
Photosensitive drum Drum cleaner
Photosensitive drum
2-45
2
2-46
Execution time Within 1 second Operation of the main unit 1) Current monitoring value of the primary charging AC bias is detected 2) Optimal primary charging current value is determined according to the result of the environment sensor (UN22) and the current monitoring value 3) The primary charging AC bias is determined to apply to the primary charging roller
Primary charging AC Current monitoring signal
HVT1 (UN16)
Bk
DC controller (UN1)
Related error codes: E061-0X01: Current monitor value error other than initial detection (current monitor value is lower limit or less, or drum unit is absent) E061-0XE0: Current monitor value error at initial detection (current monitor value is upper limit or more) E061-0XF0: Current monitor value error at initial detection (current monitor value is lower limit or less) E061-0XF1: Change amount error of current monitor value (change amount is abnormal after time elapsed) x indicates the corresponding color. (1=Y, 2=M, 3=C, 4=Bk)
2-46
2
2-47 Developing/drum
Developing overview
Toner-blocking electrode plate Developing cylinder
Developing DC bias: bias for generating potential difference from the photosensitive drum
Toner feeding screw B
Bias value is determined based on detection result of the drum film thickness
Developing motor M5 M8
ATR sensor (TS5 TS8) Toner feeding screw A Waste toner delivery discharge outlet
F-2-75
Parts name
Developing assembly Developing cylinder Toner feeding screw A/B Toner-blocking electrode plate
Function
To develop toner fed from the hopper unit on the photosensitive drum To develop toner in the developing assembly on the photosensitive drum To stir developer (toner and carrier) in the toner container to supply to the developing cylinder To apply DC bias to the electrode plate to increase retention strength of toner on the developing cylinder
T-2-26
Drive configuration
Parts name
M5 to M8 Developing motor TS5 to TS8 ATR sensor
Function
To rotate the developing cylinder and the toner feeding screw To detect the ratio of developer (toner + carrier) in the developing assembly
T-2-27
F-2-76
2-47
2
2-48
ACR (Auto Carrier Refresh) control
This machine introduced a method to supply developer (toner + carrier) to improve life (longer life) of the developing assembly. This is a control to supply developer to the developing assembly and also discharge developer to keep optimal developer amount in the developing assembly. This control prevents deterioration of carrier, which had been occurred due to reuse of developer in the developing assembly. The Toner Feed Screw A & B drive when the Developing Motor (M5 to 8) drives so that the developer will be exhausted. The developer is supplied at the right time based on the ATR control result.
Flow of toner Toner feeding screw A Return screw Toner discharge outlet
Return screw
2-48
2
2-49
Drum overview
Photosensitive drum Pre-exposure LED light guide
Drum rotation sensor2 (UN32 / 34 / 36 / 38) Drum rotation sensor1 (UN31 / 33 / 35 / 37) Photosensitive drum
Drive configuration
Drum motor M1 M4 Pre-exposure LED light guide
Parts name
Drum unit
Function
Parts name
Function
To create toner image by the toner from the developing cylinder after the static latent image has been created on the photosensitive drum. Light guide To expose pre-exposure LED light on the photosensitive drum Photosensitive drum To create toner image on the photosensitive drum Primary charging roller To make the surface of photosensitive drum to be evenly-charged potential Charging cleaning To remove residual toner on the primary charging roller brush roller Drum cleaning blade To remove residual toner on the photosensitive drum Waste toner screw To feed residual toner
T-2-28
M1 to M4 Drum motor To rotate the photosensitive drum, the waste toner screw UN31 to UN38 Drum rotation sensor 1/2 To detect rotation of the photosensitive drum
T-2-29
2-49
2
2-50
Detection of drum (presence)
To detect if the drum unit is installed or not Execution timing 1) When the power is turned ON 2) At recovery from sleep mode Detection description To be determined by current monitoring value of the primary charging AC bias In case that current monitor value is less than the specified value (1mA): no Drum Unit In case that current monitor value is the specified value (1mA) or more: Drum Unit present Execution timing Within 1 second Operation of the main unit Operation of the main unit is stopped while No drum unit is shown on the control panel.
Primary charging AC Current monitoring signal
Operation of the main unit 1) The main unit checks presence of the fuse attached to each drum (the fuse detection signal is monitored) 2) If there is a fuse, the main unit clears the drum film thickness detection data of the applicable drum unit, which is kept in SRAM (IC2). 3) The main unit cuts the fuse (to make the fuse cut signal H)
Drum unit DC controller (UN1)
+24V
SRAM (IC2)
HVT1 (UN16)
Fuse
F-2-82
Bk
DC controller (UN1)
MEMO: Fuse cut operation is executed when the power is turned ON after a new Drum Unit is installed. Thus, if replacing a Drum Unit to another one (new one) to identify a cause of failure at a field, fuse is blown and the drum thickness data is cleared. As a result, even though the original Drum Unit is installed to the host machine again, the host machine identifies it as like-new one and correct print image may not be output. With consideration to above matter, do not use a new Drum Unit when identifying a cause of failure.
2-50
2
2-51
Related service mode COPIER > FUNCTION > INSTALL > AINR-OFF (fuse cut extend on new drum unit) This is to disable the Drum Unit initialization to be executed when a new Drum Unit is inserted. Also, fuse meltdown after Drum Unit initialization will not be executed. This is used when replacing a Drum Unit temporarily and checking the image to identify a cause of a trouble etc. 0: Initialization is executed when a new one is installed. Fuse meltdown is executed. [Default] 1: Initialization is not executed when a new one is installed. Fuse melt down is not executed. Make sure to set this service mode to 1 only when it is necessary at servicing. Be sure to reset this service mode to 0 when service works are completed.
Drum life warning (approx. 10% When the drum life count value has until the end of drum line) reached the specified value. Color drum :45k Bk drum:135k The end of drum life (approx. 0% When the drum life count value has until the end of drum life) reached the specified value (Color drum :50k,Bk drum:150k) as a total from drum life warning.
T-2-30
M1~M4
HVT1 (UN16)
F-2-83
2-51
2
2-52
Drum heater control
The drum heater is attached below the photosensitive drum to keep stabilized charging and exposure according to the environmental change in the machine. This heater works only when the main power switch is turned OFF while the environment switch is turned ON.
Photosensitive drum
F-2-84
Drum rotation sensor2 (UN32 / 34 / 36 / 38) Drum rotation sensor1 (UN31 / 33 / 35 / 37)
DC controller (UN1)
F-2-85
2-52
2
2-53 Transfer/separation
Overview
Drive roller (steering roller) ITB Cleaning blade Waste toner feeding screw Primary transfer auxiliary roller Primary transfer Secondary transfer Primary transfer outer roller Primary transfer Primary transfer roller roller roller roller (Bk) (M) (C) (Y)
F-2-86
Drive configuration
ITB motor
M13 M14 ITB displacement control motor
Post-secondary transfer static eliminator ITB scraper Drive roller (steering roller)
ITB steering position sensor(PS24) ITB displacement sensor 1 to 4 (PS25 28) Primary transfer disengagement sensor(PS23) ITB scraper Idol roller Primary transfer disengagement sensor(PS22) Secondary transfer outer roller
Tension roller
Primary transfer roller(C) Patch sensor Primary transfer (Front/Center/Rear) roller(Bk) (UN47 / UN48 / UN49) M15 Primary transfer disengagement motor
F-2-87
Function
To transfer toner on the photosensitive drum to the paper To transfer toner on the photosensitive drum To attract toner on the photosensitive drum to the ITB To make the contact surface of Primary Transfer Roller (Y) with the ITB horizontal. To drive ITB. To correct the displacement of ITB. To scrape toner inside the ITB To keep appropriate tension of the ITB To scrape toner on the ITB To feed residual toner inside the ITB cleaner unit To transfer toner on the ITB to the paper To attract toner on the ITB to the paper and feed the paper To eliminate electric charge on the paper after secondary transfer
T-2-31
Parts name
M13 M14 ITB motor ITB displacement control motor M15 Primary transfer disengagement motor PS24 ITB steering position sensor PS22 Primary Transfer Pressure Sensor PS23 Primary Transfer Disengage Sensor PS25 to 28 ITB displacement sensor UN47 to 48 Patch Sensor (front/ rear) UN49 Patch Sensor (center) UN54 ITB HP sensor
Function
To rotate the ITB and the waste toner screw To move the drive roller (steering roller) To make the tension roller and the primary transfer roller (Y/M/C) engaged/disengaged To detect position of the drive roller (steering roller) To detect whether the Tension Roller and Primary Transfer Roller (Y/M/C) are pressurized condition. To detect whether the Tension Roller and the Primary Transfer Roller (Y/M/C) is disengaged condition. To detect position of the ITB To detect color displacement level (amount) To detect patch density for image stabilization control (D-max, D-half, etc.) and to detect the color displacement amount To detect home position of the ITB
T-2-32
2-53
2
2-54
Primary transfer disengagement control
The primary transfer roller for color is engaged or disengaged to keep longer life of the image formation parts (photosensitive drum, ITB) Execution timing
Primary transfer auxiliary roller Support arm Cam Drive shaft Sensor flag
Roller to be engaged: when making color prints (If 2 and more sheets of Bk continues
within a job at Color + Bk mix printing, disengage the Primary Transfer Roller when printing color)
ITB
Primary transfer disengagement motor(M15) Primary transfer disengagement sensor (PS22) Primary transfer disengagement sensor(PS23)
At standby, the colors primary transfer roller is disengaged. P22 is ON (the sensor flag blocks the light) at the time of engagement while PS23 is ON (the sensor flag blocks the light) at the time of disengagement.
Related error code E074-0001: ITB pressurized operation error E074-0002: ITB disengaged operation error E074-0003: Breakdown of Primary Transfer Pressure Sensor and Primary Transfer Disengage Sensor.
2-54
2
2-55
Primary transfer bias control
This control transfers toner on the photosensitive drum to the ITB. The primary transfer bias (DC), which has been generated by HVT2 (UN17), is applied to the primary transfer roller. Bias value is determined by the measurement value of environment sensor 1 (UN22)
DC controller(UN1)
HVT3 (UN18) DC
2-55
2
2-56
ITB displacement correction control
This control prevents damage on the ITB due to displacement of the ITB. Execution timing When the ITB is rotated Control description 1) The ITB displacement sensors (PS25 to 28) detect displacement of the ITB. 2) Drive of the ITB displacement control motor (M14) rotates the cam. The cam position is detected by the steering position sensor (PS24). 3) Rotation of the cam moves the drive shaft up/down to tilt the steering roller. 4) Tilt of the steering roller generates tension difference of the ITB to move the ITB to the front or rear. 5) Repeating steps 1) through 4) corrects displacement of the ITB.
ITB steering position sensor(PS24) ITB displacement control motor(M14) ITB displacement sensor2(PS26) ITB displacement sensor1(PS25) Drive roller (steering roller) ITB Drive shaft Cam
Related Error Codes E075-0002: failure in ITB steering position sensor E075-0003: failure in ITB displacement control (full displacement to the rear) E075-0004: failure in ITB displacement sensor E075-0103: failure in ITB displacement control (full displacement to the front)
MEMO: Following table shows detection result of the ITB displacement sensor and operation of the main unit.
ITB displacement sensor3(PS27) ITB displacement sensor4(PS28) Sensor flag Support arm
The ON state of the sensors above indicates that the light is blocked
F-2-91
2-56
2
2-57
ITB cleaning control
To remove residual toner on the ITB Control description 1) The ITB cleaning blade scrapes toner on the ITB. 2) Scraped toner is fed to the waste toner case by the waste toner feeding screw.
ITB motor M13
Waste toner feeding screw ITB cleaning blade Drive roller (steering roller)
F-2-92
Caution: Both positive bias and negative bias are applied: Because of polarized-charged (positive and negative) residual toner, both types of residual toner need to be removed. Therefore, positively-charged bias is applied on the 1st cycle of ITB while negativelycharged bias is applied on the 2nd cycle of ITB.
ITB cleaning blade
Cleaning bias2 Drive roller (steering roller) Secondary transfer outer roller
F-2-93
Related Service Mode Forced execution of the secondary transfer outer roller cleaning COPIER > FUNCTION > CLEANING > 2TR-CLN
2-57
2
2-58
Separation
Paper is separated from the ITB due to papers elastic force. In the case of thin paper which has low elastic force, the static eliminator reduces potential on the back surface of paper. This reduces electrostatic adsorption of paper so that thin paper is separated from the ITB more easily.
Post-secondary transfer static eliminator Secondary transfer inner roller
Drum cleaning
Overview
To clean residual toner on the photosensitive drum Residual toner on the drum is scraped by the drum cleaning blade. Then, rotation of the waste toner screw feeds the residual toner to the waste toner case.
Photosensitive drum
F-2-94
MEMO: On this machine, by reducing the diameter of Secondary Transfer Inner Roller, contact surface of the paper with the ITB is reduced. This prevents the thin paper from sticking onto the ITB.
2-58
2
2-59 Image stabilization control
Overview
To prevent image fault due to environmental change or deterioration of photosensitive drum to make stable print image
DC controller(UN1) ATVC control ATR control PASCAL control Toner Y Toner M Toner C Toner Bk Patch sensor (Front/Center/Rear) (UN47 / UN48 / UN49) Color displacement correction control Laser scanner unit D-max control Drum film thickness detection ARCDAT control D-half control Main controller 2
F-2-96
Control timing
Execution items for image stabilization control differ according to the environment or the condition of image-formation parts. Following shows the control items to be executed by each sequence as well as the downtime (estimation).
Model A: approx 20.9 Model B: approx 29.5 Model A: approx 46.0Model B: approx 68.1 At recovery Sleep is less than Model A: approx from sleep 8 hours 12.1Model B: approx 17.6 Sleep is 8 hours Model A: approx or more 20.9Model B: approx 29.5 Sleep is 8 hours Model A: approx 46.0 or more (in H/H Model B: approx 68.1 environment) At pre-rotation At environment Model A: approx 12.1 change Model B: approx 17.6 Per total of 500 Model A: approx 2.7 sheets Model B: approx 4.0 At sheet During printing per Model A: approx 8.4 interval total of 100 sheets Model B: approx 12.8 During printing per Model A: approx 3.3 total of 250 sheets Model B: approx 4.3 During printing per Model A: approx 11.1 total of 700 sheets Model B: approx 16.8 During printing per Model A: approx 6.1 total of 360 sheets Model B: approx 9.3 (model A) or total of 240 sheets (Model B) During printing per Model A: approx 2.8 total image ratio Model B: approx 4.3 2000% At normal condition H/H environment
At power ON
Execution timing
Execution condition
Control types
D-Max control
ARCDAT control
D-Half control
2-59
2
2-60
Control types
At postrotation
Model A: imageRUNNER ADVANCE C5051/5045 Model B: imageRUNNER ADVANCE C5035/5030 *1: ITB dirt correction, patch sensor correction etc. Related service mode COPIER>OPTION>CLEANING>T-LW-LVL (setting of the number of sheet to execute ITB cleaning sequence after transparency feed) COPIER>CLEANING>IMG-TR>ITBB-TMG (setting of ITB cleaning interval)
Execution timing
After printing per total of 25 sheets After printing per total of 125 sheets After printing per total of 180 sheets (model A) or total of 120 sheets (model B) After printing per total image ratio 800% After printing per total of 1000 sheets After printing per total of 5000 sheets
Execution condition
Model A: approx 6.1 Model B: approx 9.3 Model A: approx 11.7 Model B: approx 17.1 Model A: approx 5.0 Model B: approx 7.6
Model A: approx 2.8 Model B: approx 4.3 Model A: approx 42.6 Model B: approx 65.7 Model A: approx 47.6 Model B: approx 72.1
D-Max control
ARCDAT control
D-Half control
T-2-34
HVT1 (UN16)
C F-2-97
MEMO: Bk Drum for highly-durable type, the drum is no shave. Therefore, Bk drum is not the thickness detection. The result of drum thickness detection is reflected to the following data.
Developing bias Primary transfer bias ATR patch detection result Laser output
2-60
2
2-61
D-max control
This control determines optimal developing DC bias, primary charging DC bias, laser power output.
DC controller(UN1) Start
Execution timing 1) When replacing a drum unit or developing assembly. 2) At every post-rotation after the total reaches 1000 prints. 3) Power ON (High temperature and humidity)and corrects the each color developing DC bias, primary charging DC bias, laser power output to realize the target density.
(Y)D-max correction table
Detection details
Density
1) DC controller creates the patch pattern in corresponding color on the ITB. 2) DC Controller measures the patch density with the Patch Sensor (center) (UN49)
ITB
Y10 Y2 Y1 Y3
Target
Vdc
DC controller(UN1) Developing DC bias, Primary charging DC bias, Laser Power output is determined
F-2-99
HVT1(UN16)
HVT2 (UN17)
D-max control
DC controller(UN1)
F-2-98
2-61
2
2-62
PASCAL control
This control stabilizes gradation density characteristics of the image This control is executed when selecting [Auto gradation correction > Full correction] in User Mode. Density characteristics of the patch pattern made by test print is scanned by the reader to create the image density correction table. Using this table corrects image gradation density characteristics, which vary according to the environmental change or deterioration of photosensitive drum.
Main Controller 2 DC Controller (UN1) PG PS49 Vdc PG Paper F-2-101 Target Density Patch Sensor (Center) Reader ITB
Patch pattern for copy (64 patches for each color) Patch pattern for text (64 patches for each color) Patch pattern for photo (64 patches for each color) Patch pattern for D-max (64 patches for each color)
F-2-100
Execution timing When executing calibration (during execution of [Auto gradation correction > Full correction] in User Mode) Control description 1) When the specified conditions are satisfied, the main controller prints 4 types of memorized test prints (patch pattern). 2) Set the test print on the reader. 3) The reader scans gradation density of patch pattern from the test prints. 4) Main controller 2 creates the image gradation density correction table from the gradation density data scanned by the reader.
2-62
2
2-63
Start Main controller2 Output of patch pattern data DC controller(UN1) Patch pattern is created
D-half control
This control determines optimal image gradation Execution timing 1) When replacing a drum unit or developing assembly 2) At post-rotation every time the total reaches 1000 prints 3) At execution of PASCAL control Control details
1) The Main Controller 2 outputs the patch data of each color (Y, M, C, Bk) to the DC Controller. 2) DC Controller creates the patch pattern of each color (Y, M, C, Bk) on the ITB based on this data. 3) DC Controller measures the patch pattern with the Patch Sensor (center) (UN49) and returns the result to the Main Controller 2.
Printed test patterns are scanned by the reader (Y)PASCAL correction table
Actual gradation characteristics 100 Density dataD-CON Density dataD-CON
Y63Y64
100
2-63
2
2-64
4) The Main Controller 2 executes the gradation correction to realize the ideal halftone image based on this data. Also, this control creates the standard patch used at ARCDAT control and stores the standard data for ARCDAT according to the measurement result of UN49. (refer to MEMO.)
ITB Start Main controller2 Output of patch pattern data DC controller(UN1) Patch pattern is created (Y)D-half correction table
Actual gradation characteristics 100 Density dataD-CON
Y9 Y10
Main controller2
F-2-103
Copy pattern (10 patch per each color) Letter priority pattern (10 patch per each color) Photo priority pattern (10 patch per each color) Standard pattern for ARCDAT control (3 patch per each color)
2-64
2
2-65
Correction value calculation flow for ARCDAT control
Start DC controller(UN1) Reference patch pattern for ARCDAT is created(3Patch)
example)Reference
Control details 1) DC Controller creates the patch pattern of each color (Y, M, C, Bk) on the ITB. (3 patterns per each color, total 12 patterns) 2) DC Controller measures the patch pattern with the Patch Sensor (center) (UN49) and returns the result to the Main Controller 2. 3) The Main Controller 2 compares the actual measured data with the backed up standard data for ARCDAT control. Difference after comparison is reflected to D-half result as offset value.
ITB
ARCDAT control
This control obtains ideal gradation characteristics while reducing down time Execution timing 1) When replacing a drum unit or developing assembly 2) At post-rotation every time the total reaches 25 prints (when continuously making prints, printing is interrupted for every 100 prints to execute this control)
Video data DC controller(UN1) Density data ARCDAT Control Laser scanner unit 1/2
Density data(D-CON)
100
40 20 10
INT
Main controller2
F-2-106
2-65
2
2-66
Start DC controller(UN1) Patch pattern formation Patch sensor(center)(UN49) Patch scanning DC controller(UN1)
Measurement data (SIN) transmission
Main controller2 Comparison of measurement data (SIN) and reference data (INT)
40 20 10 INT SIN 40
Main controller2 Offset value (alpha) determination (i.e., difference between SIN and INT) Patch sensor (front) (UN47)
Data output(D-CON)
DC controller(UN1)
F-2-108
Main controller2
Current gradation characteristics
40 Data output(V-CON)
F-2-107
2-66
2
2-67
Control detail 1) DC Controller creates the patch pattern of each color on the ITB. 2) DC Controller compares those patterns with the standard value backed up in the DC Controller by reading the patch sensor (front, center, rear) (UN47 to 49) and detects the color displacement amount. 3) Based on the detected result as above, the DC Controller executes correction depending on the color displace amount. Timing to start At power ON During print for every 360 prints in total During print for every 100 prints in total supplying amount of toner by 3 types of data as follows.
Control type
Control description
Correction in Write-start main scanning correction direction Correction of overall magnification ratio Correction of odd magnification ratio Correction in sub scanning direction Write-start correction Correction of skewed image
Yes Yes
Yes Yes
Yes No
No No No
Change write-start timing in main scanning direction Increase/reduce the number of pixels in main scanning direction (at both edges of image) Increase/reduce the number of pixels in main scanning direction (at center of image) Change write-start timing in sub scanning direction Change position of laser exposure by the laser scanner unit
T-2-35
DC controller(UN1) Developing assembly toner supply Count ATR sensor Result Patch sensor Result
ATR control
This control supplies developer to the developing assembly to keep ideal ratio of developer in the developing assembly Timing to start When replacing with a new drum unit (ATR sensor) At every print (Developing Assembly Toner Supply Count, ATR sensor) In the case of post-rotation every time the total reaches 150 prints or continuous print, the job is interrupted when the total reaches 250 prints to execute this control (patch sensor) Control description Developer is supplied to the drum unit while the supplying amount of the developer for each color is calculated by the above-mentioned start timing. The DC controller determines
Related Error Codes E020-001x: Error in patch sensor of developing assembly (at initial state) (more than the upper limit) E020-002x: Error in patch sensor of developing assembly (at initial state) (less than the lower limit) E020-010x: Error in patch sensor (more than the upper limit) E020-020x: Error in patch sensor (less than the lower limit) E020-0x90: Error in ATR sensor (less than the lower limit) E020-0x91: Error in ATR sensor (more than the upper limit) E020-0xB0: Error in developer ratio when making prints (less than the lower limit) E020-0xB1: Error in developer ration when making prints (more than the upper limit) x indicates the target color (1=Y, 2=M, 3=C, 4=Bk)
2-67
2
2-68
ATVC control
This control prevents transfer failure due to environmental change or deterioration of the primary transfer roller or the secondary transfer roller
Control description 1) Monitoring current value of the primary transfer DC bias is detected 2) Optimal primary charging current value is determined based on the temperature/ humidity data of Environment sensor 1. 3) The primary transfer DC bias is determined to apply to the primary transfer roller
Primary transfer roller
DC controller(UN1)
F-2-110
2-68
2
2-69 Toner supply assembly
Overview
To supply toner in the toner container to the developing assembly
Cap release holder Cap drive link holder Toner supply drive unit Toner container
Toner container
Toner cap Toner cap position sensor1 position sensor2 (PS5 PS8) (PS9 PS12)
F-2-112
Hopper unit
Execution timing
Toner stirring plateB
When replacing a toner container Control description (e.g.: release of toner cap) 1) Toner cap position sensor 1 and 2 (PS5 to 12) detect the state of toner cap. 2) Operation of the toner container drive motors (M9 to 12) moves the cap drive link holder and the cap release holder to the right (toner container side).
F-2-111
Parts name
Toner supply drive unit Cap drive link holder Cap release holder Hopper unit Toner stirring plate A, B Toner supply screw
Function
To supply toner in the toner container to the hopper unit To open/close the toner cap and rotate the toner container To release the toner cap To supply toner in the hopper unit to the developing assembly To stir toner in the hopper unit To supply toner in the hopper unit to the developing assembly
T-2-36
3) The toner cap is secured with the cap drive link holder. <Hold the toner cap> 4) Operation of the toner container drive motors (M9 to 12) moves the cap drive link holder to the left. <Release the toner cap>
Related Error Codes E025-0100: Error in lock of toner container drive motor (Y) E025-0200: Error in lock of toner container drive motor (M) E025-0300: Error in lock of toner container drive motor (C) E025-0400: Error in lock of toner container drive motor (Bk) E025-0110: Error in timeout of toner cap position sensor (for Y toner container) E025-0210: Error in timeout of toner cap position sensor (for M toner container) E025-0310: Error in timeout of toner cap position sensor (for C toner container) E025-0410: Error in timeout of toner cap position sensor (for Bk toner container)
2-69
2
2-70
MEMO: Following shows detection result of toner cap position sensor and the operational relationship with the main unit. State of toner cap
Released In motion(released sealed) Sealed In motion(sealed released)
Description
Timing to supply
When the output result of piezo sensors (TS1 to 4) is changed from H to L Toner supply is determined to be necessary by the result of ATR control
To supply developer in the toner container to the hopper unit Supply to To supply developer in developing the hopper unit to the assembly developing assembly
*1: If the output result of piezo sensors TS1 to 4 keeps L despite drive of M9 to 12, make M9
to 12 driven for 2 seconds and then stopped for 2 seconds and repeat this procedure up to 20 times.
Detection timing
Detection source
Toner stirring plateA DC controller(UN1) Developing supply count Piezo sensor (TS1 TS4) Toner stirring plateB Toner supply level sensor (PS1PS4) Toner feeding screw Toner supply Developing motor clutch CL2~CL5 M5~M8
Hopper unit
Expected from the Developing Assembly toner supply count (judged from the number of times of toner supply to the Hopper Unit) Out of toner warning When the output result of (approx. 5% until toner sensors is changed from H to L is out) Out of toner warning Assembly Toner Supply count (approx. 0% until toner is started from no toner warning is out) 2, when a total of approx. 1000 sheets is printed. (In case of image on A4, dot ratio of each color is 5%)
Developing Please prepare a toner Assembly toner container (continuous supply count (*1) print is available)
Piezo sensor
The toner container can be replaced (continuous print is available) Developing Please replace a toner Assembly toner container (the main unit supply count (*1) stops the operation)
ATR control
Developing assembly
T-2-39
*1: Developing Assembly toner supply count indicates the toner amount that is supplied from the Hopper Unit to the Developing Assembly.
F-2-113
2-70
2
2-71
Related Error Codes E025-0100: Error in toner container drive motor (Y) E025-0200: Error in toner container drive motor (M) E025-0300: Error in toner container drive motor (C) E025-0400: Error in toner container drive motor (K) E027-0100: Error in supply to developing assembly (Y) E027-0200: Error in supply to developing assembly (M) E027-0300: Error in supply to developing assembly (C) E027-0400: Error in supply to developing assembly (K)
Drum unit
Related service mode COPIER>OPTION>DSPLY-SW>T-CRG-SW (Toner Container replacement mode display switch) COPIER>OPTION>CLEANING>T-LW-LVL (No toner warning display timing changing switch)
Developing assembly
Waste toner
Parts name
Waste toner feeding unit Waste toner feeding screw Waste toner case Waste toner screw 1, 2
Function
To feed waste toner in each unit to the waste toner case To feed waste toner from the drum cleaning unit To keep waste toner To stir toner in the waste toner case
T-2-40
2-71
2
2-72
Waste toner case full level detection
To detect toner level accumulated in the waste toner case
ITB cleaner unit ITB unit
Related Error Code E013-0001: error in lock of waste toner feeding path
Execution timing 1) When the power is turned ON 2) When the front cover is open
DC controller (UN1)
Developing assembly
Detection description The waste toner case sensor (UN21) detects the presence of waste toner case. ON: there is a waste toner case
Waste toner Waste toner case Waste toner screw2 Waste toner case sensor
[There is waste toner case : Sensor OFF] Waste toner stirring M26 plate motor Waste toner screw1
F-2-115
Drum unit
Developing assembly
DC controller (UN1)
Detection description
Waste toner full level warning (approx. 7% until the waste toner level is full) Waste toner full level warning (approx. 0% until the waste toner level is full)
Detection timing
When the output result of sensor is changed from H to L
Detection source
Waste toner full level sensor Developing Assembly toner supply count
After the Developing Assembly toner supply count is started from full alert, when a total of approx. 1000 sheets is printed (in case of image on A4, dot ratio of each color is 5%)
T-2-41
F-2-116
2-72
2
2-73 Other controls
Special control
Following sequences are assigned as special sequence with this machine
ITB cleaning blade Solid black band ITB ITB cleaning blade Solid black band ITB ITB cleaning blade Solid color band (Y/M/C/Bk) ITB
F-2-117
Sequence for black band In the case of continuous prints while no toner is fed to the ITB cleaning blade, the ITB cleaning blade can be removed. Therefore, toner (width = full width of ITB, length = 1mm solid black band) is transferred on the ITB to supply toner to the ITB cleaning blade. <Execution timing> At post-rotation after the total reaches 100 prints Sequence for transparency black band When resistance adjustment agent on the transparency is attached on the ITB, it reduces transfer efficiency on the attached area. If considerable amount of resistance adjustment agent is attached on the ITB, it can cause fusion in the ITB cleaning assembly. To prevent this symptom, toner (width = full width of ITB, length = 80mm solid black band) is supplied to the ITB cleaning blade. <Execution timing> Sheet-to-sheet interval after 15 sheets of transparency are printed continuously At post-rotation after 7 sheets are printed continuously since the last execution Sequence for color band Making prints with low image ratio can deteriorate toner and reduces developing performance. To prevent this symptom, average image ratio for each color is calculated by ATR control and appropriate amount of toner (width = A4, length = solid color band appropriate for deteriorated toner amount) determined by the calculation is transferred to the ITB. <Execution timing> When average image ratio per sheet is 2% or less
2-73
2
2-74
Service work
Periodically replaced parts
Not applicable
Consumable parts
No.
1 2 3 4 5 6 7
Parts name
ITB Primary transfer roller Secondary transfer inner roller Secondary transfer outer roller ITB cleaning blade Transfer separation guide unit Developing assembly (Y)
Remarks
Developing assembly (M) Developing assembly (C) Developing assembly (Bk) 8 Developing assembly (Y) Developing assembly (M) Developing assembly (C) Developing assembly (Bk) 9 Toner filter
T-2-42
Work
Cleaning Cleaning Inspection
Remarks
T-2-43
2-74
2
2-75
Fixing System
Overview
Features
This machine introduces the on-demand fixing method.
Separation guide Fixing film Fixing delivery roller
1. Saving energy Fast warm-up reduces standby electric power thanks to low heat capacity. 2. High speed 51ppm is enabled by introducing a new toner and the film capable of high heat transfer. 3. Supported media Feeding 52g/m2 paper is available due to the modification of film path and Separation Guide, and image quality has been improved as well.
Fixing heater
2-75
2
2-76 Specifications
Item
Fixing method Fixing speed
Heater
Control temperature
On-demand fixing 51 / 45ppm 246 mm/s (1/1-speed, plain paper) machine 123 mm/s (1/2-speed, thick paper) 82 mm/s (1/3-speed, coated paper, transparency) 35 / 30ppm 160 mm/s (1/1-speed, plain paper) machine 80 mm/s (1/2-speed, thick paper, coated paper, transparency) Ceramic heater Individual drive of Main Heater (heat-generation distribution: high in center) / Sub Heater (heat-generation distribution: high in edges). Purpose: to control temperature rise at the edge Target temperature at printing (plain paper 1 (64 to 81 g/m2)) 51 / 45 ppm machine: 169~180 deg C 35 / 30 ppm machine: 150~163 deg C By the main thermistors (2pc) and the sub thermistors (2pc) Thermistors To block power supply to the fixing heater when a failure is detected Temperature fuse Rated operation temperature: 228 +0/-6 deg C
T-2-44
Film unit
F-2-119
Main thermistor 1 (TH1) Fixing heater (H1) Fixing heater (H1) Main thermistor 2 (TH1) Fixing pressure sensor (PS30) Inner delivery sensor (PS37)
Sub thermistor 2 (TH1) Shutter position sensor (PS32) Temperature fuse (TP1) Main thermistor 2 (TH1) Main thermistor 1 (TH1) Sub thermistor 1 (TH1)
F-2-120
2-76
2
2-77
Shutter Fixing cooling fan (front) (FM5)
Parts name
----H1 TH1 Film unit Pressure roller Fixing heater Main thermistor 1
Function / method
Applying heat and pressure makes the toner image on paper fixed (fused). Ceramic heater
To be in contact with the heater Temperature control, detection of abnormal temperature rise Main thermistor 2 To be in contact with the film Temperature control, detection of abnormal temperature rise Sub thermistor 1 To be in contact with the heater (non-feeding area) Temperature control, detection of abnormal temperature rise, temperature detection / cooling control on the edge Sub thermistor 2 To be in contact with the heater (non-feeding area) Temperature control, detection of abnormal temperature rise, temperature detection / cooling control on the edge TP1 Temperature fuse Noncontact type with the heater To block AC electric power supply when a failure is detected. PS30 Fixing pressure sensor Detection of engagement / disengagement of the film unit PS31 Shutter HP sensor Detection of shutters home position PS32 Shutter position sensor Detection of shutters position PS37 Internal delivery sensor Jam detection
T-2-45
2-77
2
2-78
Controls
Fixing temperature control: overview
Fixing temperature STBY Flying start control temperature INTR Startup (warm-up rotation) control temperature During-print control temperature PRNT Sheet-t o-sheet control temperature
15 sec
Time Command for flying start Command for print start
F-2-122
Time
When pressing the numeric key on the control panel When pressing the button / key on the touch panel When opening / closing the cassette At recovery from sleep mode to standby mode
Startup (warm-up rotation) temperature control Print temperature control Sheet-to-sheet temperature control Down sequence control
To prevent fixing failure due to rising temperature at the edge or fall in temperature. This control causes reduced through-put.
Control description: Temperature rises to a certain point (150 degrees Centigrade: Main Thermistor 2). This operation takes for 15 seconds after the last operation.
Down sequence when feeding small size paper Down sequence when switching paper size
2-78
2
2-79
Related Service Mode (Lv.2) COPIER > OPTION > FNC-SW > FLYING
(To enable/disable Flying start (pre-mature start) <Setting value> 0: Enable Flying start [default] 1: Disable Flying start
STBY
INTR
Startup (warm-up rotation) control temperature During print control temperature
PRNT
Sheet-to -sheet control temperature
2-79
2
2-80
Sheet-to-sheet distance temperature control
If the distance between sheets is longer than usual*1, temperature between sheets is reduced to prevent temperature rise. Temperature between sheets = target temperature during printing (30 to 50 deg C)*2 *1:At down sequence Between the 1 side and the 2 side when making 2-sided print
st nd
Target temperature during printing Paper type () : paper weight g / m2 Print speed (ppm) Target Paper length in width direction temperature 216.1 431.9 457.3 (deg C) ~216.0 ~431.8 ~457.2 ~630.0
169~180 51 25.5 20 16
Model
Speed
1 / 1-speed 246 mm / sec.
When controls are executed (ATR control, registration control, ATVC control) *2:To be determined according to the elapsed time since the last control of fixing temperature (including standby control) and fixing temperature at the start of warm-up control
51 / 45 Plain 1(64~81) / Color ppm (64~81) / Recycled (64~81) / machine Pre-Punched / Tracing paper / Japanese paper (93) Thin (52~63) Plain 2 (82~105) / Bond (80~90) Except Japan Plain 2 (82~105) / Bond (80~90) Japan Heavy 1 (106~163) / Label (151~180) Heavy 2 (164~209) / Embossed(150) / Postcard, 4 on 1 postcard(190) / Tab Envelope Coated 1(106~163) Heavy 3(210~256) Coated 2 (164~209) Transparency (151~180) 35 / 30 Plain 1(64~81) / Color ppm (64~81) / Recycled (64~81) / machine Pre-Punched / Tracing paper / Japanese paper (93) Thin (52~63) Plain 2 (82~105) / Bond (80~90) Except Japan Coated 1(106~163) Heavy 3(210~256) Heavy 1 (106~163) / Label (151~180) Heavy 2 (164~209) / Embossed(150) / Postcard, 4 on 1 postcard(190) / Tab Coated 2 (164~209) Transparency (151~180) Envelope
51 51 40 25.5 20
20 20 17 10 8
16 16 14 8 7.5
20 17 17 17 17 35
35 35 17 17 17 17
17 17 17
2-80
2
2-81
Related Service Mode
Display of thermistor detection temperature > FIX-C (detected temperature of main thermistor 2) > FIX-E (detected temperature of main thermistor 1) > FIX-E2 (detected temperature of sub thermistor 1) > FIX-E3 (detected temperature of sub thermistor 2) Offset of fixing control temperature > TEMP-TBL (plain paper 1) > TMP-TBL2 (thick paper 1) > TMP-TBL3 (thick paper 2) > TMP-TBL4 (thick paper 3) > TMP-TBL5 (thin paper) > TMP-TBL6 (envelope) > TMP-TBL7 (plain paper 2) > TMP-TBL8 (transparency) > TMP-TBL9 (coated paper 1) > TMP-TB10 (coated paper 2)
<Setting value>
-2: -10 deg C -1: -5 deg C 0: 0 deg C [default] +1: +5 deg C
51 / 45 Plain 1(64~81) / Color (64~81) / Recycled (64~81) / Pre-Punched / ppm Tracing paper / Japanese paper (93) machine Thin (52~63) Plain 2 (82~105) / Bond (80~90) Except Japan Plain 2 (82~105) / Bond (80~90) Japan Heavy 1 (106~163) / Label (151~180) Heavy 2 (164~209) / Embossed(150) / Postcard, 4 on 1 postcard(190) / Tab (160~203) Envelope Coated 1(106~163) Heavy 3(210~256) Coated 2 (164~209) Transparency (151~180) 35 / 30 Plain 1(64~81) / Color (64~81) / Recycled (64~81) / Pre-Punched / ppm Tracing paper / Japanese paper (93) machine Thin (52~63) Plain 2 (82~105) / Bond (80~90) Coated 1(106~163) Heavy 3(210~256) Heavy 1 (106~163) / Label (151~180) Heavy 2 (164~209) / Embossed(150) / Postcard, 4 on 1 postcard(190) / Tab (160~203) Coated 2 (164~209) Transparency (151~180) Envelope
12~4
9~3
6~2
12~4
6~2
2-81
2
2-82
Related Service Mode Completion conditions: This down sequence is completed if any of the following conditions is satisfied:
(Lv.1) COPIER > OPTION > IMG-SPD > FX-D-TMP <Setting value>
-4: -3: -2: -1:
Setting for down sequence start temperature when feeding small size paper
When the specified period of time*1 has passed since the preceding paper went
through the fixing nip. *1: Specified period of time differs whether the fan has cooled the preceding paper or not.
0:
+1: +2: +3: +4:
If the preceding paper is A4R or larger and A3 or smaller (the fan has cooled the
paper) 15 seconds
If the preceding paper is smaller than A4R (the fan has not cooled the paper)
30 seconds
Non-feeding area
Film
A4R
A4
Non-feeding area
F-2-125
Starting conditions: If the detected temperature of sub thermistor 1 or 2 exceeds the specified temperature (250~260 deg C) when switching to the paper which has longer width than the preceding paper. Operation: Pickup of the succeeding paper and power distribution to the heater are stopped as well.
2-82
2
2-83 Fixing film edge cooling control
Temperature at the edge of the film is increased when continuously making prints. Excessive temperature rise can deteriorate the film. When small size paper (A4R or shorter size in width direction) is printed, the mode changes to the down sequence. When making prints with paper that is A4R or longer and A3 or shorter in width direction while the film temperature exceeds the specified temperature (sub thermistor 1,2), the fan attached near the fixing assembly sends air and cools the film to control temperature rise. Unlike down sequence, this control will not reduce the through-put because this control is executed while printing is continued.
Detection result
High: No fixing assembly is found. Low: There is a fixing assembly.
T-2-48
Shutter
M27
Shutter motor Shutter position sensor (PS32) Shutter HP sensor (PS31) Fixing cooling fan (rear) (FM6) Direction of movement
Shutter
M27
There is a shutter at the air vent, which moves (opens) in 7 levels according to the size of feeding paper. This feature enables to send air to optimal area on the film.
2-83
2
2-84 Film unit engagement / disengagement control
To prevent deformation of the fixing film / pressure roller caused by heat and pressure when the drive of pressure roller is stopped, and also to improve jam recovering performance, the film unit is disengaged from the pressure roller under the following conditions:
Fixing pressure sensor (PS30) Sensor flag Fixing Motor
M21
Protection features
Code Description
Error Clear E001 Detection of abnormal high temperature 0000 When main thermistor 1/2 detects 255 deg C or more for 0.2 sec. Clear 0001 When sub thermistor 1/2 detects 275 deg C or more for 0.2 sec Clear 0003 When the thermistor detects temperature beyond the upper value: Clear Main thermistor 2 = 265 deg C Main thermistor 1 = 264 deg C Sub thermistor 1 = 280 deg C Sub thermistor 2 = 280 deg C E003 Detection of low temperature 0000 When main thermistor 1/sub thermistor 1/sub thermistor2 detects 21 Clear to 50 deg C for 3 sec. 0001 When main thermistor 1 detects (target temperature 70 deg C) or Clear less for 5 sec. 0002 When the thermistor detects disconnection (any thermistor detects 20 Clear deg C or less for 3 sec) 0003 When the control fails to be completed 60 sec after the start of warmClear up rotation. E004 Detection of abnormal fixing heater drive circuit 0000 When disconnection of the thermistor is detected. Unnecessary E808 Detection of abnormal fixing drive circuit/power supply 0000 Zero-cross error (faulty low voltage circuit) Unnecessary
T-2-50
F-2-127
Execution conditions / timing The film unit is disengaged when the power is turned ON At recovery from sleep mode At recovery from jam removal When the front cover/right cover is closed.
Execution conditions / timing When the power is turned OFF At jam detection when the power is turned ON When the mode is shifted to sleep mode (when the power switch on the control panel is OFF, when the specified period of time has passed since the mode has shifted to sleep mode)
Related Error Codes
2-84
2
2-85
Service work
Periodically replaced parts
No parts are assigned to be replaced periodically.
Parts number
FC8-4906 XG9-0172
Qty
1 1
Remarks
Replace the Film Unit at the same time Replace the Film Unit at the same time
Consumable parts
Parts name
1 Film unit
Parts number
FM3-5949 FM3-5950 FM3-5951 FC8-4906 XG9-0172
Counter (DRBL-2)
Adjustment
1
Remarks
100V 120V 230V
FX-UP-FR N.A. *
1 2
300,000 300,000
1) Set paper on the manual feed pickup tray. 2) Execute output of fixing nip paper in Service Mode: (Lv.1) COPIER > FUNCTION > FIXING > FIX-NIP Paper is picked up to make 2-sided print. 1st side: solid image in Magenta, 2nd side: no image (blank)
Pressure Roller
The paper is stopped at the nip area when fixing is performed on the 2nd side, and then delivered outside the machine approx. 15 sec later. 3) Measure the nip width and check that the measured value is within the specified range.
Bearing
2-85
2
2-86
Specified value (range): Center: 9.0 -/+ 1.0mm Edge (145mm from the center of feeding paper): 9.0 -/+ 1.0mm
If measured value is out of the specified range, reinstall the replaced parts (film unit or pressure roller) and then measure the nip width again. MEMO: Fixing nip width cannot be adjusted in the field
2-86
2
2-87
Specification
Item
Paper storage method Pickup method Cassette 1, 2 Multi-purpose tray Paper stack capacity Cassette 1, 2 Multi-purpose tray Paper feed reference Paper size Cassette 1
Description
Front loading method Separation retard method Simple retard method 550 sheets (80g / m2 paper), 650 sheets (64g / m2 paper) 100 sheets (80g / m2 paper, 100 sheets (64g / m2 paper) Center reference Standard (universal) B4, A4, B5, LGL, LTR, EXE, A4R, B5R, LTRR, A5R, STMTR, 8K, 16K, 16KR, Cassette 2 Standard (universal) A3, B4, A4, B5, LDR, LGL, LTR, A4R, B5R, LTRR, EXE, A5R, STMTR, 12 x 18, 8K, 16K, 16KR, Envelope (when an option is installed.) Multi-purpose tray A3, B4, A4, B5, LDR, LGL, LTR, A4R, B5R, LTRR, EXE, A5R, STMTR, 12x18, SRA3, 8K, 16K, 16KR, postcard, envelope, non-standard size (99mm x 140mm to 320mm x 457.2mm) Paper grammage Cassette 1, 2 52 to 209g / m2 Multi-purpose tray 52 to 256g / m2, For 210g / m2 or more, multi-purpose tray 1-sided only. Paper size switch Cassette 1, 2 Size auto detection Multi-purpose tray Input from the operation panel by uses 2-sided print method Through path method Paper level display Yes (displayed in 3 levels on LCD panel) OHP detection Yes Lead edge margin 4.0mm 1 ~ + 1.5mm Right edge margin 2.5mm 1.5 ~ +1.5mm
T-2-52
2-87
2
2-88 Parts Configuration
Roller Layout Drawing
[1] [2] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] Reverse Roller Second Delivery Roller Third Delivery Roller Duplex Inlet Roller Duplex Feed Upper Roller Duplex Feed Lower Roller Multi-Purpose Tray Pickup / Feed Roller Multi-Purpose Tray Separation Roller Vertical Path Roller 2 Cassette 2 Feed Roller Cassette 2 Separation Roller Cassette 2 Pickup Roller [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] Cassette 1 Separation Roller Cassette 1 Feed Roller Cassette 1 Pickup Roller Vertical Path Roller 1 Registration Roller Secondary Transfer Roller Fixing Roller Post-Fixing Roller Fixing Inner Delivery Roller First Delivery Roller Second / Third Delivery Inlet Roller
[3]
[21] [20] [19] [18] [17] [6] [7] [16] [15] [9] [10] [11] [8] [5]
[14] [13]
[12]
F-2-130
2-88
2
2-89
Sensor / Switch Layout Drawing
[PS39] [PS45] [PS42] [PS43]
[PS40]
[PS44]
[PS41] [PS37]
PS33 PS34 PS35 PS36 PS37 PS38 PS39 PS40 PS41 PS42 PS43 PS44 PS45 PS47
Registration sensor Fixing Inlet Sensor Fixing Loop Sensor 1 Fixing Loop Sensor 2 Inner Delivery Sensor Duplex Paper Sensor Reverse Sensor Duplex Inlet Sensor First Delivery Sensor Second Delivery Sensor Third Delivery Sensor First Delivery Tray Full Sensor Second Delivery Tray Full Sensor Multi-Purpose Tray Paper Presence Sensor
PS49 PS50 PS51 PS52 PS53 PS54 PS55 PS56 UN51 UN53 SW6 SW7 SW8 SW9
Cassette 1 Paper Presence Sensor Cassette 2 Paper Presence Sensor Cassette 1 Paper Level Sensor A Cassette 1 Paper Level Sensor B Cassette 2 Paper Level Sensor A Cassette 2 Paper Level Sensor B Cassette 1 Pre-Registration Sensor Cassette 2 Pre-Registration Sensor OHP Sensor Vertical Path Sensor Cassette 1 Size Switch A Cassette 1 Size Switch B Cassette 2 Size Switch A Cassette 2 Size Switch B
[PS34][PS35] [PS36] [UN52] [PS38] [PS47] [PS33] [UN51] [UN53] [SW7] [SW6] [PS50] [PS54][PS53] [PS56] [PS49] [PS52] [PS51] [PS55]
[SW9] [SW8]
F-2-131
2-89
2
2-90
Load Driving Drawing
M24 SL6 SL7 Reverse mouth M25 Second delivery First delivery M23 SL5 M22 M20 M21 Multi-purpose tray pickup Meandering is reduced Third delivery
Paper Path
R40
R40 M19 CL1 M18 SL4 Cassette 1 pickup Side deck pickup
SL2
M16
Cassette 2 pickup
SL3
M17
F-2-132
Cassette 1 Pickup Motor Cassette 1 Pickup Motor Multi-Purpose Tray Motor Registration Motor 2-Sided Feed Motor Fixing Motor Fixing Delivery Motor First / Second Delivery Motor
Reverse Roller Motor Third Delivery Motor Cassette 1 Pickup Solenoid Cassette 2 Pickup Solenoid First Delivery Flapper Solenoid Second Delivery Flapper Solenoid Third Delivery Flapper Solenoid Multi-Purpose Pickup Clutch
To support the heavy paper feeding, the feed path at Duplex Feed Assembly is made a gentle curve and damage on the paper is reduced.
2-90
2
2-91 Interval Speed Up
Reverse sensor [PS39]
246mm/sec (C5051,C5045) 400mm/sec (C5035,C5030) 300mm/sec (C5051,C5045) 340mm/sec (C5035,C5030) 300mm/sec Delivery speed up position Inner delivery sensor [PS37] Duplex paper sensor [PS38] Duplex re-pickup position Registration position
Pre-registration position
F-2-134
2-91
2
2-92
Various Controls
Overview
Duplex / Delivery Assembly
Cassette 1 paper level sensor B Fixing / Registration A ssembly Pickup assembly Cassette 2 Cassette 2 Idler gear paper level sensor B pickup solenoid Multi-Purpose Pickup Assembly Cassette 2 paper level sensor A Cassette 2 paper presence sensor
F-2-136
Area
Cassette Pickup Assembly
Detection, Control
Paper Level / Presence Detection Paper Size / Cassette Presence Detection Pre-Registration Control Multi-Purpose Pickup Assembly Paper Presence Detection Paper Size Detection Fixing / Registration Assembly OHP Control Registration Control Fixing Arch Control Duplex / Delivery Assembly Duplex Feed Control Duplex Wait Control JAM Detection JAM Detection
T-2-53
2-92
2
2-93
Drive Configuration
Pickup Roller1 Vertical path Roller1 Feed Roller1 Detachment Roller1 SL2 Pickup Roller2 Lifter SL3 M17 M16 Vertical path Roller2 Feed Roller2 Detachment Roller2
Detection
Paper Level / Presence Detection There are 3 sensors to detect the paper level and paper presence in the cassette. Paper level is displayed on the operation panel.
If the paper is full Cassette paper level sensor B Cassette paper level sensor A Paper
Lifter
F-2-138
Cassette 1 Pickup Motor Cassette 2 Pickup Motor Cassette 1 Pickup Solenoid Cassette 2 Pickup Solenoid
OFFOFF If the paper is approx. half Cassette paper level sensor B Cassette paper level sensor A Paper
OFFON If the paper is a little Cassette paper level sensor B Paper Cassette paper level sensor A
F-2-139
2-93
2
2-94
Display Remaining Level 100% to approx. 50% of capacity Approx. 50% of capacity to approx. 50 sheets Approx. 50 sheets or less No paper Sensor A OFF ON ON Sensor B OFF OFF ON Paper Presence Sensor OFF OFF OFF ON
F-2-140
Paper Size Detection / Cassette Presence Detection Paper size of the cassette can be automatically detected by adjusting the position of the guide plate. Concavo-convex area of the cassette dial is switched when the guide plate is shifted and two Size Switches on a printer are switched. Length and width are detected according to the ON / OFF combination of switches. As long as standard paper, both AB type and inch type can be used. However, size should be found manually on the check screen for the combination of A5-Rand STMT-R or the combination of B5-R and EXEC.
Detection dial Cassette size switch B
F-2-141
2-94
2
2-95
Width
B5 EXEC 16K A5-R A4 STMT-R LTR B5-R LTR-R A4-R LGL B4 8K A3 LDR 12x18 257 267 270 148.5 297 139.7 279.4 182 215.9 210 215.9 257 270 297 279.4 304.8
Length
182 184 195 210 210 215.9 215.9 257 279.4 297 355.6 364 390 420 431.8 457.2
1
0 0 0 ON 0 ON 0 ON 0 0 0 0 0 0 0 0
Width detection 2 3
ON ON ON 0 ON 0 ON 0 0 0 0 ON ON ON ON ON ON ON ON ON 0 ON ON ON ON ON ON ON ON 0 ON 0
4
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1
0 0 ON ON ON ON ON 0 ON 0 ON ON ON 0 0 0
Length detection 2 3
0 0 0 ON ON ON ON ON 0 ON ON ON ON 0 0 0 0 0 0 0 0 0 0 ON 0 ON 0 ON ON ON ON 0
Be sure to set the following paper sheet-by-sheet to the Multi-purpose Tray. If fails to set the paper sheet-by-sheet, it may cause troubles. Paper type
Glossy paper (coated paper) Tracing paper Washi Extra long paper (up to 1200mm) Pickup can be enabled at service setting.
Basis weight/name
Overall Overall Overall Overall
T-2-56
Basis weight/name
Overall Overall
Caution
Let out the air of envelope and disperse the glued tabs Since there are size variations, non-image area appears in case of full copy. Handle this by free size setting.
T-2-57
Pre-Registration Control
To correct the feed variation at pickup and to perform the stabilized paper feed, preregistration control is executed. When the paper leading edge is detected at the Pre-Registration Sensor (at Vertical Path Sensor on cassette 1 only) on each cassette, the machine determines whether to stop the pre-registration or not. Pre-registration stop is determined when the following conditions are true.
Also, the cassette presence is detected when the size switch is pushed. (If no switch is pushed, it is determined as no cassette.) Separation paper list It is recommended to separate the following paper depending on the paper status (especially moisture absorption) and paper trimming state when setting the paper. This ""separation"" can avoid troubles. Paper type
Carbonless paper Transparency Labels Tub paper Pre-punched paper OK Prince Joshitsu Canon Europe Canon Recycled 80 (Vision Classic White) Canon Europe Canon High Grade (Mondi Business Paper) Canon Digital Office Colour (Stora Enso MultiCopy Special Colour Laser)
Main area
JPN EUR EUR EUR
T-2-55
There is preceding paper. The preceding paper has not reached the Registration Sensor. Time until the Registration Sensor of preceding paper is turned OFF > / = time until the
Registration Sensor of succeeding paper is turned ON
2-95
2
2-96 Multi-Purpose Tray Pickup Assembly
Overview
Parts Configuration
Multi-purpose pickup clutch (CL1) Multi-purpose motor (M18) Multi-purpose tray Multi-purpose size sensor (UN52)
Drive Configuration
Multi-purpose motor M18 CL1 Multi-purpose tray lifting solenoid SL4 Multi-Purpose Tray Detachment Roller Multi-purpose pickup / feed roller
F-2-143
Detection
Multi-purpose paper sensor (PS47)
F-2-142
Paper Presence Detection The paper presence is detected by the Multi-Purpose Tray Paper Presence Sensor. When the paper absence is detected, if there is the same size & same type paper exists in other cassette, auto cassette change is executed. Paper Size Detection The paper width is detected according to output value from the variable resistor that works in conjunction with the side guide. Since the length cannot be detected, users have to specify the setting.
2-96
2
2-97 Fixing / Registration Assembly
Overview
Parts / Drive Configuration
Registration Control
OHP Detection As the countermeasure for when the paper other than transparency film is fed in transparency mode, OHP sensor is used as white paper detection to identify whether the fed paper is transparency or not. However, since this is not used to identify the transparency for CLC, jam will occur when CLC paper is fed.
Registration motor(M19)
Registration Control To make the paper straight-enter the transfer assembly, registration control is executed. After the paper passes through the Registration Sensor, the drive of the Pickup Motor (MultiPurpose Tray Pickup Motor, Duplex Pickup Motor) is turned OFF to stop the paper by the distance from the Registration Sensor to the Registration Roller with arch amount added.
Registration sensor (PS33) Registration sensor flug Cassette 1 pre-registration sensor(PS55) Pre-registration sensor flug Transparency sensor(UN51)
Registration roller
To reduce the noise when the paper enters the Registration Roller, speed is decreased by 200mm / sec upon Registration Sensor ON. However, if the distance with the preceding paper is too far, productivity cannot be satisfied. Moreover, the paper may be late for the image. In such case only, the speed is changed by 246mm / sec when the paper enters the Registration Roller.
To always feed the paper to the Fixing Unit in optimal status, this control is to monitor the paper slack (arch) condition and to switch the feed speed at the Fixing Motor according to the status. This is executed between the Secondary Transfer Unit and the Fixing Unit. When the Pressure Roller of the Fixing Unit expands with heat, circumference of roller is also increased. Thus, even though the number of rotation is consistent, the feed speed at the fixing side is faster than the feed speed at the secondary transfer side. To fix this, change the speed of the Fixing Motor according to the arch condition using the Fixing Arch Sensor 1&2.
F-2-144
2-97
2
2-98 Duplex / Delivery Assembly
Big arch detection
Overview
Parts / Drive Configuration
Reverse roller M24 Second delivery roller SL6 SL7 Third delivery roller Fixing arch sensor 2 Fixing motor feed speed up M23 First delivery roller SL5 M25 Duplex inlet roller Second & third delivery Inlet roller Duplex feed upper roller M20
F-2-146
Duplex Feed Motor First / Second Delivery Motor Reverse Motor Third Delivery Motor
First Delivery Flapper Solenoid Second Delivery Flapper Solenoid Third Delivery Flapper Solenoid
2-98
2
2-99
Duplex Control
Duplex Feed Control On this machine, the paper is revered outside the machine with using the reverse mouth. After that, feed operation is performed by 340mm / sec on imageRUNNER ADVANCE C5051 / C5045 (300mm / sec on imageRUNNER ADVANCE C5035 / C5030).The paper fed to the duplex path is transferred to the duplex re-pickup position unless there is paper on the path at the downstream side. If there is paper on the downstream path, it is delivered from the reverse path or it stops at the duplex upstream. In case of output to the First / Second Delivery Mouth, 5-sheet circulation is used for small size (LTR or smaller); however, 3-sheet circulation is used for large size (larger than A4R). This is because 2 sheets of paper cannot wait on the duplex feed path. In case of output to third delivery mouth, 3-sheet circulation is used for middle size (A4R or smaller); however, 1-sheet circulation is used for large size (larger then A4R) since the succeeding paper enters the reverse path before the preceding paper goes through the reverse path and jam will occur. Following is the each duplex reverse position and the number of sheet circulation by size. First / Second Delivery
Small size (LTR or smaller) Middle size (A4R or smaller) Large size (larger than A4R) 5 3 3 42.4mm Duplex inlet wait position
Duplex Wait Control To realize 5-sheet circulation, there are 2 duplex wait positions. Following is the duplex wait position for small paper.
Third Delivery
3 3 1
T-2-58
Compared to the conventional model (imageRUNNER C3380), feed speed at the duplex feed assembly is slowed down. This is to get the precise feed, to reduce the noise and the motor loads. However, by changing the circulation algorism, the speed is accelerated when printing a number of sheets and 51 sheets / min speed is achieved.
Since the curve of duplex path shape gets steeper at the leading end, as duplex wait position gets closer to the registration, curl tends to occur frequently. For the paper smaller than A3, the duplex wait position is 50mm away from the Registration Sensor toward upstream in due consideration with the productivity. In case of A3 paper or larger, the sheet interval is wide enough to satisfy the productivity, so the position which avoids curl occurrence and is 85mm away from the Registration Sensor on the upstream side is to be the duplex wait position.
2-99
2
2-100 JAM Detection
At the cassette pickup assembly, since the feed speed is increased, detection cannot catch up with it. Thus, delay and stationary jam detection are not executed at the Cassette 1 PreRegistration Sensor. Instead of it, the Vertical Path Sensor executes the delay and stationary jam detection. Since the residual jam should be detected on each cassette, the Cassette 1 Pre-Registration Sensor detects it. Because the Vertical Path Sensor is too close and it is unnecessary to execute detection, the Vertical Path Sensor does not execute residual jam detection. Sensor Jam code XX 02: Stationary 03: Residual 01: Delay jam jam jam Code C5051 C5035 C5051 C5035 C5051 C5035 / / / / / / C5045 C5030 C5045 C5030 C5045 C5030
PS55 PS56 UN53 PS33 PS34 PS37 PS41 PS42 PS39 PS43 PS40 PS38 N Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y Y
T-2-59
Name
85mm
XX01 XX02 XX13 XX05 XX06 XX07 XX08 XX09 XX0A XX0B XX0C XX0D
Cassette 1 pre-registration sensor Cassette 2 pre-registration sensor Vertical path sensor Registration sensor Fixing inlet sensor Inner delivery sensor First delivery sensor Second delivery sensor Reverse sensor Third delivery sensor Duplex inlet sensor Duplex paper sensor
2-100
2
2-101
Service Works
Periodically replacement parts
N/A
Consumables
No.
1 2 3 4 5
Parts Name
Cassette Feed Roller Cassette Detachment Roller Multi-Purpose Feed Roller Multi-Purpose Tray Detachment Roller Pickup Assembly Idler Gear
Periodical service
No.
1 2 3 4 5 6 7 8 9 10 11 12 13
Parts Name
Registration roller Pre-registration guide Transparency sensor Fixing delivery guide Post-fixing roller Fixing delivery roller First delivery roller Second delivery roller Third delivery roller Duplex feed upper roller Duplex feed lower roller Vertical path sensor Lightproof sheet
Execution timing
50k 50k 50k 50k 50k 50k 50k 50k 50k 50k 50k 150k 150k
Work
Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Inspection Inspection Cleaning Cleaning
Remarks
-
T-2-61
2-101
2
2-102
MEAP
Changes
Changes of Local UI / Remote UI Designs
In line with iR model innovation, changes have been made on UI designs. Local UI Particularly menus on Local UI have been drastically changed from the tab to icon format. Main Menu
Settings / Registration screen shows menu paths on the left, increasing accessibility to the paths from the current screen.
F-2-151
Remote UI Shortcuts to SMS, etc. are added to Remote UI. Remote UI: Portal and SMS
F-2-149
F-2-152
F-2-150
2-102
2
2-103 Integration of Remote UI and MEAP Portal
MEAP Portal, conventionally provided as an independent function, has been integrated in Remote UI. Changes made with this integration include:
The list of servelet applications supported in MEAP-Portal is shown on the lower right of Remote UI.
F-2-153
MEAP Portal is out of service when Remote UI functions are disabled. Portal.jar conventionally included in MEAP Administrator's CD is not packaged in CDs for
iR-ADV C5051 series / iR-ADV C9075 series series and later. In addition the older versions of portal.jar are not supported, either.
When specifying http:// <iR device's IP address> :8000/portal, the user will be redirected to
Remote UI Portal. MEMO: There are some MEAP applications that are displayed only when a user logs in as an administrator.
F-2-154
2-103
2
2-104 Changing Default System Manager PIN
Conventionally, System Manager PIN was null in the factory setting, while this model sets the default values at the factory shipment. The default values are set as below:
System Manager ID System PIN : 7654321 : 7654321
Yes
Refer to the value of portalLang stored in Cookie. Remote UI display setup language English or Japanese
Refer to the setting of the Accept-Language header, which a browser sends out. Language priority setting of a browser Refer to the setting of a language displaying in registration/initial setting [Additional Function].
MEAP applications created on the VGA basis are shown in the center of screen, however, this will not affect application's behaviors. Example of Screen View
Except English or Japanese Display in English. Display in the language configured.
F-2-157
When accessing by SMS Installer Service (Password Authentication) It is referred in order of the language priority (setting of the Accept-Language header which a browser sends out) and the display-language setting in the "user mode". When the language setup is other than English or Japanese, it is displayed in English.
F-2-156
2-104
2
2-105
When accessing by SMS Installer Service (Remote Login Service Authentication). Initial display language is set by the language setting (value of portalLang storing in Cookie) selected by the remote UI screen. When the setting is other than English or Japanese, Selection of display language is performed in a similar way with the SMS Installer Service (Password Authentication) mentioned above.
Cookies must be enabled for each session. Java Script must be enabled in all environments. The required web server functions for each server are built into the MEAP device, so there is no need to configure them separately.
For the following operations in the combined environment of Windows XP and Internet Explorer6, Java2 Runtime Environment Standard Edition 1.5 or later is required.
User registration / edit in SSO-H local device Use of remote login in SSO-H.
SMS
The following system environments are required in order to enable SMS access. Operating System
Windows 2000 Professional Windows XP Professional
Supported browser
Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Safari 1.3.2 Safari 2.0.4 Safari 3.0.4
T-2-63
Windows Server 2003 Windows Server 2003 R2 Windows Vista Mac OS X 10.3 Mac OS X 10.4 Mac OS X 10.5
2-105
2
2-106 SSO-H Management
When using SSO-H for the login service, required system environments are different in domain authentication or local device authentication. See the following for system requirements in each of authentication methods: MEMO: System environments for administrator and ordinary user Operating System
Windows 2000 Professional Windows XP Professional Windows Server 2003 Windows Server 2003 R2 Windows Vista Windows Server 2008 Mac OS X v10.3 Mac OS X v10.4 Mac OS X v10.5
Supported browser
Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Safari 1.3.2 Safari 2.0.4 Safari 3.0.4
Microsoft Internet Explorer 6 : Sun Java Runtime Environment 1.4 or later Microsoft Internet Explorer 7 : Sun Java Runtime Environment 1.4 or later
In case either of the following OS is installed in a client computer, Java Runtime Environment should be installed separately. - Windows 2000 Professional Japanese version (Service Pack 4 and later) - Windows XP Professional Japanese version (Service Pack 1a and later) - Windows Server 2003 Japanese version, Windows Server 2003 R2 Japanese version Visit the URL of Sun Microsystems (US) to learn how to obtain Java Runtime Environment. Accesses via IPv6 communication from a client computer require Java 2 Runtime Environment Standard Edition 1.5 and later. If [Internet Option]>[Securities]>[Customizing Levels]>[Run ActiveX controller and Plug-in] is disabled in a computer, Internet Explorer prompts the warning message, Java Runtime Environment not Installed. Use Update6 or later for Java Runtime Environment6. Accesses via IPv6 communication from a client computer require JAVA 2 Runtime Environment Standard Edition 1.5 and later.
T-2-64
System environments for administrator and ordinary user (when using IPv6 communication) Operating System
Windows XP Professional
Supported browser
Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7
Domain authentication management In order to use domain authentication in SSO-H, the following sytem environments are required.
Windows Server 2003 Windows Server 2003 R2 Windows Vista Windows Server 2008
The following Windows servers are installed under Active Directory, and DNS server for
name resolution.
Microsoft Windows 2000 Server SP4 Microsoft Windows Server 2003 SP1 Microsoft Windows Server 2003 R2 Microsoft Windows Server 2008
T-2-65
Windows 2000/2003 Domain Name System (DNS) access privileges Domain controller access privileges
2-106
2
2-107
MEMO: Local Device Authentication Management For user registration / edit in Local Authentication, following system requirements must be satisfied. System environments for administrator and ordinary user Operating System
Windows 2000 Professional Windows XP Professional Windows Server 2003 Windows Server 2003 R2 Windows Vista Windows Server 2008 Mac OS X v10.3 Mac OS X v10.4 Mac OS X v10.5
Use User Logon Name (Windows 2000 or older) registered in Active Directory as the user name for domain authentication. For domain authentication, set a user name only with 1-byte alphanumeric characters and symbols of - (hyphen), _ (underbar), and % (percent). iR device will reject login with a user name including a forbidden character. For domain authentication, the time setting should be synchronized between Active Directory server and the device (as well as the PC to be logged in). If the time is different for 5 minutes or more, a login error is triggered in domain authentication (the setting of allowable time difference can be changed). A domain authentication manager should be registered when domain authentication is used. If not registered, setting or management is disabled for some applications. How to register the manager depends on system environments. - When using imageWARE/iW Accounting Manager, the administrator registered to imageWARE/iW Accounting Manager will be authorized also as the domain authentication manager. See Users Guide of imageWARE/iW Accounting Manager on how to register the administrator. - When not using imageWARE/iW Accounting Manager, a user belonging to Canon Peripheral Admins group on Active Directory will be authorized as the domain authentication manager. Follow Active Directory Operation Manual to create Canon Peripheral Admins group before registering the manager.
Supported browser
Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 SP1 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Safari 1.3.2 Safari 2.0.4 Safari 3.0.4
Microsoft Internet Explorer 6 : Sun Java Runtime Environment 1.4 or later Microsoft Internet Explorer 7 : Sun Java Runtime Environment 1.4 or later
T-2-67
System environments for administrator and ordinary user (when using IPv6 communication) Application Operating System
Windows XP Professional Windows Server 2003 Windows Server 2003 R2 Windows Vista Windows Server 2008
Supported browser
Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 SP2 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7 Microsoft Internet Explorer 7
Communication with DNS server (fixed) Kerberos authentication with KDC (Key Distribution Center) Communication with directory service using LDAP (default is 389, may be changed to any port on LDAP service side)
T-2-66
T-2-68
2-107
2
2-108
MEMO: When System Manager ID and PIN are set, the menus under [Network] are gray-out and cannot be selected. In such cases, return to Top screen and press [Log In] button shown on the lower left to log in as System Manager for setup.
MEMO: When using SSL, press [Settings/ Registration] button, select [Management Settings]> [License / Other] > [MEAP Settings] > [SSL Settings] and press [On] button. (This setting is applied to SSL setting on RUI. Vice versa, [On] set for SSL on RUI is also applied to the touch panel.) When [Use SSL] is set to On, the message dialog, [The Default Key is not set. Check the Key and Certificate List settings in Certificate Setting.], is shown. Press [OK] button for this message.
F-2-158
2) Press [OK] button to return to Main Menu screen. 3) Restart the device.
2-108
2
2-109
Login to SMS
The setting [Use HTTP] is not actually enabled/disabled until you have restarted the
device. SMS login may be done by entering a password for authentication, or by authentication via the Remote Login Service (RLS) login window (RLS authentication). Settings can be changed to allow either only one of these methods or both of them. SMS login window (password auth) RLS login window (user name/ password auth)
You cannot make a connection through a proxy server. If a proxy server is in use,
enter the IP address of the MEAP device in the Exceptions field for the browser. Open Internet Options dialog of Internet Explorer and select Connections tab, LAN Settings button, Use a proxy server option, and Advanced button of Proxy server group. Proxy Settings dialog will opens. The Exceptions field is in the dialog. As network settings vary among environments, consult the network administrator.
If Cookie and JavaScript are not enabled in the Web browser, you will not be able to use SMS. device's touch panel display. The MEAP device may not properly recognize some characters.
To type text using the Web browser, use the characters compatible with the MEAP
F-2-159
When [se SSL] is made available, it is necessary to set the key and the certificate
necessary for the SSL communication. Set the key and the certificate by SSL with [Certificate Settings] that exists in [System Settings] > [Network Settings] > [TCP/IP Settings] on the iR device.
Login method
Password authentication RLS login
Authentication method
Password authentication SSO-H
MEMO: If Default Authentication is selected as the device authentication method, 'RLS Authentication' is not selectable as SMS Login method. Also, if 'RLS Authentication' is selected, the device authentication method (Default Authentication, SDL, SSO) cannot be changed.
2-109
2
2-110 Login by Password Authentication
In the SMS login window, enter the password for authentication. Only one password can be registered with SMS. The login procedures are as follows. 1) Access SMS from the browser of a PC on the same network as the MEAP device. The URL is as follows. URL: http://<MEAP Device IP address>:8000/sms/ Ex.) http://172.16.188.240:8000/sms/ MEMO: 2) If the wrong password is entered, the following window is displayed. The user's system administrator may have changed the password, so confirm the password with the system administrator. Note that there is no special password for service.
The default password is "MeapSmsLogin." (The password is case-sensitive.) When you want to change the display original language, change in the box in the right of the screen. This setting is not affect by the setting of the language of the device.
F-2-161
F-2-160
2-110
2
2-111 Login by RLS Authentication
Login without using the SMS login window but by entering the user ID and password for authentication in the RLS (Remote Login Service) window. The user information (user name and password) used is the information for domain authentication or local device authentication. The login procedures are as follows. 1) Access SMS by RLS Authentication from the PC browser on the same network as the MEAP device. URL: http://<IP address of MEAP device>:8000/sms/rls/ Ex.) http://172.16.188.240:8000/sms/rls/ MEMO: SMS Access can be gained also from Remote UI. Access Remote UI and click on SMS shortcut shown on the lower left of the screen to gain access to SMS. When only the password authentication is enabled, the password authentication screen is shown. When only the RLS authentication is enabled, no further authentication is needed to access SMS. This is because users have already authorized upon accessing to Remote UI.
F-2-162
MEMO:
When the device authentication method used is domain authentication, enter the user name, password and login destination registered with Active Directory and then click 'Log In'. If the authentication method used is local device authentication, enter the user name, password and login destination registered in the device and click 'Log In'. - When using SDL as the login service, enter the user information registered in the device, as per local device authentication. The user information is set as below for local device authentication by default. Both are case sensitive. - User Name: Administrator - Password: password Only the following users may us SMS via RLS. - In the case of domain authentication, users belonging to the Canon Peripheral Admins Group. - For local device authentication, users with Administrator or Device Admin authority.
2-111
2
2-112
If only login via RLS is programmed, login may be disabled for the following reasons.
F-2-163
F-2-164
2-112
2
2-113
3) Click [Start] or [Stop] button shown in Status field of SMS Installer Service (Password Authentication) to check if the status is changed.
F-2-165
4) Logout once and login again to check to see that the setting is applied properly. When clicking [Stop] to change the status to [Start], another password authentication login screen is firstly shown. When trying to access the password authentication screen after clicking [Start] to change the status to [Stop], the user is automatically redirected to RLS authentication screen. 2) Select [System Application Management] on System Management menu. Password authentication started screen and Password authentication stopped screen
F-2-167
F-2-166
F-2-168
2-113
2
2-114
3) Click on [Start] or [Stop] button shown on Status field of SMS Installer Service (Remote Login Service Authentication) to check if the status is changed.
F-2-169
You will not be able to install an application if the size of the remaining memory falls short of the size declared by the application. Moreover, the specifications have been designed so that an application will not be able to start up if there is a shortage of memory for any of the foregoing items (i.e., memory, thread, socket, file descriptor). Follow the steps below to check the remaining memory: 1) Log in to SMS.
4) Log out and then log in again and access via the RLS authentication login window. When RLS authentication is set to [Start], another RLS login screen is firstly shown. When accessing to RLS status screen with the setting of [Stop], the user will be redirected to the password authentication screen. RLS authentication started screen and RLS authentication stopped screen
2) Click [MEAP Application Managemnet]. 3) Check [Resource Information] for information of the whole device resources.
F-2-170
F-2-171
2-114
2
2-115
MEMO Older iR models show resource information required in each application in List of Application page (corresponding to MEAP Application Management page of this model). When checking the resource information of each application in this model, click on the application name in MEAP Application Management page.
F-2-172
4) Check to see that the status of the MEAP application in question is either [Started] or [Stopped.]
F-2-173
2-115
2
2-116
MEAP Specifications
What is MEAP Specifications (MEAP Spec Version)? MEAP Specifications is one of the information required to judge whether MEAP applications can be operated or not. With MEAP Specifications, you can prevent an application that uses a specific function of device from being installed onto the device that does not have the
Some applications may not be installed to some MEAP devices of specific specifications. (See 'MEAP Specifications ').
function. About Name MEAP Specification is shown as 'MEAP Specifications' in the screen to check the version on the side of device that supports MEAP (counter confirmation button) and MEAP
platform (SMS). On the other hand, in the manifest file of MEAP application, it is shown as 'MeapSpecVersion' (described in the same way in the SDK document) (Note) 'MEAP Specifications' hereafter in this document. Mechanism MEAP platform judges whether MEAP applications can be operated on it using on the 2 information below:
Specification ID above, including network and security. Thus each model does not always have the same version. MEAP application declares 1 or more MEAP Specifications required for its execution. Declaration of multiple Device Specification IDs means that the application is operable in all the environments declared. Upon installation of MEAP application in SMS or MEAP Enterprise Service Manager, matching of MEAP Specifica tions is executed on the side of MEAP
2-116
2
2-117
platform machine. The machine which doesn't support the version declared by the application rejects installation of such an application. MEAP Spec Version for each model Product Name KOR SPL OCE EUR USA
iR-ADV C5051/C5045/ C5035 /C5030 iR-ADV C9075 iR-ADV C9070 iR-ADV C9065 iR-ADV C9060 iR-ADV C7065 iR-ADV C7055 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
T-2-71
Version
29 30
Description
IMI API added (IMI version 1.2.1 enabled) Extended address book function. (e-mail/group/i-FAX/file) Integrated ERS function Extended Imaging function (function to generate PDF/OOXML (PowerPoint) with visible signature) Extended function for image Runner/iR Advanced series (API for address book/ CTK/ TopMenu) Extended IMI Box function (v1.3.0) Extended SIS function (function to check the network cable status, function to check PS print server unit status) CLS (Contextual Login Service) Supporting API Added Image Runner/iR Advanced Series administrative privileges supported MEAPSpecVersion added according to Jcrypto API Specification Change ImagingAPI (Creation API of Visible Signature PDF) added Image Runner/iR Advanced Series Remote Address Book Supported, RemoteFAX Supported.
T-2-72
Remarks
31 32 33 34 35 37 38 39 40 45
CCN / TW
Y
Y Y Y Y
Y Y Y
Description
11 13 14 15 17 18 19 25 26 27
2-117
2
2-118
F-2-176
MEAP system information was printed out in PDL format conventionally. However, the information has been printed out in text format instead of PDL format, enabling iR devices without PDL installation to print out information (iR C3220 and later).
F-2-175
4) System information of each application (including system applications) is shown in an additional window. Copy and paste all the information in a file to attach to AR reports as text information. This function is useful to check status information of each application.
2-118
2
2-119 Content of MEAP system information
Application System Information Application Name: C-Cabinet Gateway for MEAP Application ID/System Application Name: 03a46668-63e4-4636-9cbb-492b6cef05d5 Application Version: 1.0.0 Status: Resolved Installed on: Tue Oct 21 14:00:11 GMT+09:00 2003 Vendor : Canon Inc. License Status : Installed Maximum Memory Usage : 1024 Registered Service : Application Name It is the name (bundle-name) declared in a statement within the application program. It may not necessarily be identical to the name of the program. Application ID/System Application Name In the case of a system application, it will be the file name. If a general application, it is the application ID (application-ID) declared in a statement within the ap plication program. Within the device, the applications are set apart by means of their application IDs. Application Version It is the version of the application (bundle-version) declared in a statement within the application program. Status It indicates the status of the application in question; specifically, Installed: the application has been installed. Active: the application is being in use. Resolved: the application is at rest. Installed On It indicates the date on which the application was installed. Vendor It is the name of the vendor that developed the application, and is the name (bundle-vendor) declared in a statement within the application program. License Status It indicates the status of the license; specifically, None: no license is needed. Not Installed: no license has been installed. Installed: the appropriate license has been installed. Invalid: the license has been invalidated. Overlimt: the license has been used beyond its permitted limit. License Expires After It indicates the date after which the license expires. If the status of the license is 'none', this item will not be printed. License Upper Limit It indicates the limit imposed on individual counter readings. If the status of the license is 'none', this item will not be printed. Counter Value It is the current counter reading of a specific counter. If the status of the license is 'none', this item will not be printed. Maximum Memory Usage It indicates the maximum amount of memory that the application uses. It is the amount (maximum memory usage) declared in a statement within the application program, and is expressed in kilobytes. Registered Service It is a list of services that have been registered by the application with the MEAP framework. Some services may not have printable data.
2-119
2
2-120
Installing an Application
Resource
When 1 MEAP application operates, the resource volume allocated to each device is as follows (loaded resource list). Since the following value is an estimate, when installing the MEAP applications, it needs to check the available resource of SMS. Since the indication of SMS resource volume fluctuates by the login service (authentication function) and configuration (future model), which the user selected, it may show a bigger value than the following values. List of Available Resources Product Name
iR-ADV C5051 series iR-ADV C9075 series
HDD
1024MB 1024MB
Memory
128MB 128MB
Thread
256 256
Socket
256 256
File Description
256 256
T-2-73
MEMO:
As for memory, check the available resource when starting up the application. For other resources other than memory, check them when installing. Some applications call for a specific set of conditions for installation. For details, see the User's Guide that comes with the individual applications. Maximum installable application is up to 20 even if the remaining resource is adequate. (However, the Send function consumes 1, it must be 19 in practice.) Authentication application is not included in this number. The MEAP application, which can be started simultaneously, is up to 19. (Authentication application is not included in this number.)
F-2-177
3) Check [ Install MEAP Application/License ]page appears. 4) Click [Browse..] button, and select the application file and the license file of the application; then, click [OK] button. MEMO: Application File: identified by the extension "jar". License File: identified by the extension "lic".
To install an application, the user needs to use the following URL when accessing
the license control system to obtain a license file. In doing so, he/she needs to register the license access number of the application and the serial number of the device. http://www.canon.com/meap/
F-2-178
2-120
2
2-121
7) Check the message "Installing...Please wait a moment." appears, beginning the installation.
You cannot install only the license. You will not be able to install the application without using the appropriate license.
Be sure to select its license file.
If you are updating an existing application, stop the application; then, install the new
application or its license file. You will not be able to update an application while it is running. screen to view MEAP Application Management page.
F-2-180
8) Upon installation completed, click [To MEAP Application Management] button shown on the 5) Check the contents of the Confirm page; then, click [OK] button.
F-2-181
MEMO: To use the application that you have just installed, you must make sure that the application status is Started.
F-2-179
6) Some applications show a screen to indicate the terms of agreement. Read the terms, and click [OK].
2-121
2
2-122
MEMO: The license file is provided in text file format, enabling to view in a text editor. The application ID and device serial number shown in the file allow users to confirm which device to install with the license file. Note that any changes added to the license file may disable installation. Cares should be taken when confirming the contents of the license file. Sample file
License File ID Application ID Serial Number Validated Period Counter informations
F-2-182
2-122
2
2-123
3) In [Application / License Information] page shown on the screen, click [License Management ] button. 4) Click [ Browse ] button, and select the license file you want to install.
F-2-184
F-2-183
F-2-185
6) Check the content of the confirmation page, and click [OK] button
2-123
2
2-124
To invalidate (or suspend) a license, you must first stop the application in question. Once suspended, the status of the license will be 'Not Installed', and its application
will no longer be available for use.
You can later restore a suspended license file as long as you are doing so on the
same iR, the device with the same device serial number.
When replacing the device due to lease up or trouble, use the license for forwarding
(see Chapter 2, "License for forwarding.").
1) Stop the application you want to uninstall on MEAP Application Management page.
F-2-187
F-2-188
F-2-186
2-124
2
2-125
4) License Management page appears. Click [Disable] button.
Once you have removed an invalidated license file, you will no longer be able to download it form the MEAP device.
F-2-189
5) Click [Yes].
F-2-190
F-2-191
2-125
2
2-126
4) On Application / License Information page, click [License Management] button. 7) To delete, click [Delete] button.
F-2-192
F-2-194
F-2-195 F-2-193
6) When you have selected [Download] button, specify where you want to store the file by following the instructions on the screen. Without the license file, an application cannot be reinstalled even to the MEAP de-vice that the application had been installed last time. Download and save the license file before deleting the application.
2-126
2
2-127
Reusable license
When reinstalling, Disable License file should be downloaded (see Chapter 2, "Disabling a License File ." and see Chapter 2, "Downloading / Removing an Invalidated License File." in this manual) or a license for reinstallation should be obtained from LMS, before reinstallation. This specification aims to prevent misuse of applications. To increase convenience of users, only application with unlimited validity date and application counter (e.g. Portal Service, SDL, SSO) has been made to be able to install as many times as needed by the same license file. This kind of license is called 'Reusable license'.
F-2-196
2) Move to the download page of license forwarded for the device as sender (http:// IP address of device: 8000/sms/ForwardLicense).
F-2-197
2-127
2
2-128
3) Specify the application to be forwarded. 5) The window to confirm whether to create a transfer licence will be displayed. Click [OK].
F-2-200
6) Icon of license file for forwarding is displayed in the box of license file downloading. Click [Download].
F-2-198
F-2-201
F-2-199
2-128
2
2-129
7) The dialogue [File Download] is displayed. Click [Save]. 11) Since this downloaded transfer license is the file only to prove the license invalidation, it cannot be used for installation to the other device as it is. Send the transfer license to the service support contact of your nearest sales company to request issuance of the new license for installation in the new device. MEMO: When requesting issuance of license for forwarding, inform the sales company of the name of product name and serial No. of the device as sender, and of the name of product name and serial No. of the forwarding destination. 12) Install application using the license for forwarding issued by the sales company.
F-2-202
F-2-203
9) After downloading the license file for forwarding, click [Delete] to display the confirmation screen and click [Yes] to delete the file (in consideration of breakage of license for forwarding, deleting disabled license can be executed after all steps have been completed).
F-2-204
2-129
2
2-130
Uninstalling an Application
Procedure uninstalling an application
To uninstall a MEAP application, the license status should be set to Not Installed (to
be deleted). When a user tries to uninstall an application before deleting the license, the following message is shown. Refer to the sections of "Disabling a License File " and "Downloading / Removing an Invalidated License File" of this manual to delete the license file.
F-2-205
4) Check the application name to be uninstalled shown on the screen to click [Yes] button. Upon [Yes] button clicked, uninstallation process is started.
Dimmed [Uninstall] button shows that the selected application cannot be removed. If the application you are uninstalling is associated with another application, a message will appear to indicate that the package exported by the application will no loner be available. Uninstalling such an application may also disable its associated applications. 1) Log in to SMS to click [MEAP Application Management] on the menu. 2) [MEAP Application Management] page is shown.
F-2-206
2-130
2
2-131
Login Service
The login service is started up to authenticate the user when MEAP-enabled iR device is booted up. Login service changes and install/ uninstall are carried out from the 'System Management' page. The pre-install applications and those provided on the accessory CD are as follows. Default Authentication is used as the default at the time of shipment from the factory. Description
Pre-install Accessory CD Default Authentication ( Default), Single Sign On-H Single Sign On-H
T-2-74
Both the domain authentication and local device authentication login services can be used. There is no need to have a separate SA server. Login is not via SA, so SSO-H refers directly to DNS for authentication. Kerberos and NTML protocols are supported. The following three authentication methods may be selected from.
To use Department ID management in domain authentication, the option imageWARE accounting manager is required.
When the setting is SSO-H, the card reader for the option controller card cannot be
used.
When using SSO-H, the clock settings of the server managing the Active Directory
and the MEAP device (and the PC used to log in), must be matched. If there is a time difference of greater than five minutes in the clock settings, an error will be generated when login is attempted.
Data porting of user information that was being used with the earlier SSO local
device authentication and SDL can be done by exporting/ importing. However, application settings information cannot be ported.
When the setting is SSO-H, start up takes a little longer when compared to Default
Authentication (because of the time required for object initialization).
To use the SEND function when the setting is for SSO-H, when sending email, mail
addresses need to be programmed against each user. If they are not, email cannot be sent. Note, however, that when sending i-Fax, the mail addresses set in the device are used.
This device does not support SDL, conventional SSO and Security Agent. In addition
these are not packaged in Administrator's CD.
2-131
2
2-132 Authentication methods of SSO-H
SSO-H can use multiple authentication methods, and the user can toggle between them from a Web browser. (Refer to the MEAP Authentication System Settings Guide 'User Authentication Method Settings'.)
DC
The factory shipment setting is 'Domain authentication + local device authentication'. In order to provide increased security, as soon as SSO is used, it is recommended that the administrator's user name and password in local device authentication be changed from the factory shipment settings as soon as possible.
SA
Device
Local device authentication This is an authentication method that is used for single iR devices. The authenticating users are registered in the iR device's database. User management is performed on the Web application provided by the device, or from the imageWARE Enterprise Management Console/ iW Management Console. The login destination is [This device]. Domain authentication This is a form of user authentication which operates in collaboration with the domain controller on the Active Directory environment network and, as soon as the iR device is logged into, carries out authentication of the domain on the network. In addition to users belonging to the domain that includes the iR device, users belonging to domains that have a reliable relationship with the domain (multi-domain) can also be authenticated. The domain name of the login destination can be selected by the users themselves upon login. The function makes use of options iW EMC Accounting Management Plig-in to enable analysis and management of the iR device usage status. The protocol used is as follows.
Domain A
SSO
Domain authentication + local device authentication This is a user authentication method that provides both domain authentication and local device authentication functionalities. Principally, domain users who are registered/ managed by the Active Directory are authenticated by domain authentication, and local device authentication can be used when it is necessary to au thenticate a temporary user that cannot be added to the Active Directory. Also, should there be any kind of a problem with the domain controller or Security Agent (SSO only), local device authentication can be used in emergency situations, while waiting for normal status to be restored. In the figure shown below, users belonging to Domain A, which includes the iR device, and users belonging to Domain B, which has a reliable relationship with Domain A, can be authenticated, and users registered with the iR device itself can also be registered. The login destination (domain name or [This device]) is se lected by the user upon login.
Domain A Domain B Domain Controller (Active Directory )
Domain A User
iR Device
Domain B User
F-2-208
2-132
2
2-133 Access Mode in Sites
To run domain authentication and Department ID management at the same time, the
options Net Spot Accountant, iW Accounting Manager or iW EMC Accounting Management Plug-in are required. If domain authentication is selected as the authentication method without linkage to these systems, login will be disabled and Department ID management will not come ON. If Department ID management cannot be turned ON when using domain authentication and login is disabled, switch the login service to Default Authentication and turn Department ID management OFF. With SSO-H, access to Active Directory within site can be prioritized or restricted, so there is a setting called 'Access Mode in Sites'. Sites programmed in Active Directory comprise multiple subnets. In this mode, SSO-H uses site information to access the same site as the device, or the subnet Active Directory.
The SSO-H default setting is with the site internal access mode OFF. Access Active Directory within same site only. If there is no Active Directory within the same site, or if connection fails, there will be an
authentication error.
Access another site if Active Directory within the same site cannot be located. If there is no Active Directory within the same site, or if connection fails, an Active Directory
external to the site will be accessed.
If all attempts to access Active Directory fail, there will be an authentication error.
The operating specifications of the site internal access mode are as described below. When first logging in to the login service after booting iR, the domain controller (DC) is obtained from the site list. However, upon the first login, even if the site functionality is active, connection to DC is random. (This is because, if connection to DC should fail, the site to which the device belongs cannot be ascertained.) If the device IP address or the domain name are changed, the site settings are acquired once more. In this mode, at the first login (first authentication of domain to which the device belongs) LDAP-Bind is performed directly to DC and site information acquired by LDAP from DC. From the acquired site list, the site to which the device subnet belongs is extracted and this becomes the site to which device belongs. Active Directory address is acquired (retrieved from DNS)
In local device authentication the card reader for the option control card cannot be
used.
Linkage with Department ID management when using SSO-H SSO-H has collaborative linkage with imageWARE/iW Enterprise Management Console Access Managemnet Plug-in, imageWARE/iW Enterprise Management Console Accounting Managemnet Plug-in. Only when used with 'Local device authentication', can department ID/ passwords be allocated to users. In the event that these are allocated, authentication can be performed even when the main unit's department management is ON. Department ID and department passwords are not allocated to domain users. When the main unit's department management function is ON, domain users cannot be authenticated. MEMO: With SSO, linkage with imageWARE/iW Enterprise Management Console Accounting Managemnet Plug-in was assumed and department management linkage was enabled even in domain authentication, but with SSO-H, this is now unsupported. System Manager Linkage (automatic ID allocation to System Managers) SSO provided the automated function conventionally on Security Agent (hereinafter SA) to authenticate System Manager by allocating IDs set on SA to domain authentication managers (users belonging to Canon Peripheral Admins group). However, SSO-H does not support this function.
2-133
2
2-134
Settings for access mode in sites Switching between site internal access mode/ non site internal access mode, as well as
The Active Directory subnet is assumed to be the same subnet as the device sub-net. In the Active Directory addresses, the Active Directories of the same site are listed. Active Directories of the same subnet as the device are listed first. If there is no Active Directory with the same subnet as the device, Active Directories
belonging to different subnets than the device are listed.
detailed mode settings, are done via DMS or iWEMC. Site internal access mode settings window (DMS)
The Active Directories within the same site are accessed in order. Note, however,
that where there are multiple Active Directories within the same site, access to those Active Directories will be in the order in which the address list was obtained.
If there is no Active Directory within the same site, if access outside of the site is
programmed, Active Directories outside of the site will be accessed in the order in which the address list was obtained.
F-2-209
The figure below shows a sample of processing Access Mode in Sites. Sample of Processing Access Mode in Sites
Site list acquisition After booting up, upon the first login by LLS or ILS/ RLS, the site list is obtained from the Active Directory. In order to obtain the site list from the Active Directory, Active Directory needs to be accessed in LDAP, so SASL-Kerberos-Bind is used by the login user account. If authentication by Active Directory should fail, an authentication error will be generated and the site list will be acquired again from Active Directory upon the next login. In SSO-H, the Active Directory to be accessed when acquiring the site list cannot be specified. In other words, if there is no site list, which site's Active Directory is accessed depends upon the order of the Active Directory addresses returned by DNS. Therefore, when acquiring the site list, LDAP may access the Active Di rectory of a different site. Therefore, in such cases, it is sometimes necessary to access across sites or subnets, which means that LDAP protocol needs to have continuity across sites (subnets) (normally, LDAP is port No. 389). Further, if connection with Active Directory fails when acquiring site information, another Active Directory will be accessed. Site information, once it has been acquired, is cached within the device. The life settings of the cache can be set so that site information in the cache is updated upon the first login after the device boots up, or so that the cache is not updated once acquired.
Domain X
DNS Server A records: AD 192.168.1.2 AD 172.24.12.2 AD 172.24.35.2 AD 211.111.1.30 SSO-Tokyo 172.24.12.80 SSO-Osaka 192.168.1.90 SSO-Hakata 211.111.1.3
at
Repllic
ation
N WA Access Active 3.
1. When making initial settings, obtain site list and ascertain which site the device belongs to. SSO-Tokyo 172.24.12.80 WAN
DC-Osaka/DNS 172.168.1.2
Site:Osaka 192.168.1.0/24
SSO-Tokyo 192.168.1.90
F-2-210
1) SSO-Tokyo acquires site lists from Active Directories. Note, however, that the Active Directories accessed in order to acquire site lists are in the order in which they were returned by DNS, so there is no guarantee that the same Active Directory will be accessed as in the initial settings (upon device settings or changes to NW settings, etc.). [Site subnet list] Site: Tokyo: = 172.24.12.0/24, 172.24.35.0/24
2-134
2
2-135
Site: Osaka: = 192.168.1.0/24 Site: Hakata: = 211.111.1.0/24 As a result, since SSO-Tokyo is 172.24.12.80, the subnet is 172.24.12.0/24, and is judged as belonging to site Tokyo. 2) The DNS server obtains its Active Directory list from the primary or secondary DNS, as set in the device. [Active Directory] 172.24.12.2, 172.24.35.2, 192.168.1.2, 211.111.1.30 3) Of the Active Directories in 2), above, the ones that belong to the same site (Tokyo) are 172.24.12.2 and 172.24.35.2. Of these, the Active Directory that is the same subnet as SS-Tokyo is 172.24.12.2. Therefore, this one will be accessed. 4) If access fails at step 3), above, the other Active Directory of the same site, 172.24.35.2, will be accessed. 5) If access fails at step 4), above, also, SSO-Osaka and SSO-Hakata will be accessed (the order will depend on the order of the Active Directories in DNS). Note, however, that this is an optional operation. Logging into other domains at multi-domain At multi-domain, if another domain is logged into, based on the site/ subnet information retrieved in the home domain, the Active Directories of the login destination domain/ KDC address list are computed. In the event that the domain controller IP addresses of other domains are outside of the site access range, and only the domain controller within the site is programmed for access, an error message will be displayed to the effect that the site information is incorrect.
Availability of Department Management Linkage Site access IPv6 Memory (KB) / thread (numbers) Supported Active Directory
Specification of SSO-H
Item
No. of local device users Maximum number of domains Supported device
Specification
Up to 5000 200 domains (this device not included) All the MEAP-enabled iR devices (different SSO-H versions are supported depending on machine types) (Authentication provided in IPv6 supports AD/KDC/DNS of Windows Server 2008 only) 3584/33 Windows 2000 Server SP4/ Windows Server 2003 SP1/Windows Server 2003 R2/ Windows 2008 Server(64BitOS not supported) Available only in local authentication Supported
T-2-75
SSO/SDL handling Conventional SSO and SDL are not packaged in Administrator's CD of this model. In addition, this model does not support older versions of SSO or SDL released in the past.
Environment confirmation
Refer to the section of "Checking the Operating Environment" of this manual for system requirements needed in each login service.
2-135
2
2-136
3) When login service application you have selected turns to Start after Restart, restart the device.
F-2-211
2) A page will appear showing the various selections you can make for the login service.Click [SWITCH] button for the login service to be used.
F-2-213
F-2-212
2-136
2
2-137
Creating a Backup, Formatting the Hard Disk, Restoring with the Backup data, Using the SST
Outline
This function aims to temporarily save MEAP application memory areas in HDD of the PC at the time of HDD formatting. You can back up the area of the HDD where MEAP applications reside to a PC, as when you want to format the HDD. MEAP devices use a license-based mechanism to control applications so that formatting the HDD will necessarily delete the jar files and application data, requiring you to not only reinstall them but also make necessary settings. (Doing so consists in obtaining special license files for reinstallation and downloading user data/settings, increasing your work load.) If you use the SST's backup function, you will be able to temporarily put aside the area of MEAP applications, thus being free of the foregoing extra work. This function, however, is limited to a specific MEAP device (serial number), and cannot be used for illegal copying of applications.
You must not perform any other work (including checking operation) until the HDD has been backed up. This arrangement is to prevent a mismatch of MEAP counter readings and the HDD contents, and any fault in operation arising as the result of failure to observe this will not be covered by the guarantee of operation.
MEMO: The application that is installed with a reusable license can be reinstalled by using the same license.
F-2-214
3) When you click [Initialize] button, the confirmation message appears. Click [OK] button. Then Login page opens. Enter the default password 'MeapSmsLogin' to log in. The password is case-sensitive. MEMO: If you click [Cancel] button, the Login page opens without initializing the password.
2-137
2
2-138 Backup Items
The following items are backed up using SST:
jar files of MEAP applications Setup data generated by MEAP applications (Note that image data stored in BOX will not
be saved for MEAP applications using BOX function).
If a hard disk of a system that uses SSO-H is formatted without changing the login
service to the default authentication, the error message "The login service must be set again with SMS" appears and the system cannot start up when you attempt to restart the system after formatting.
If this problem occurs, change the login service to SSO-H with SMS. If you cannot
access to SMS since you do not have the IP address of the device, start the system with FIXIP mode -hold down the numeric keys 1 and 7 and turn the power switch on. The IP address "172.16.1.100" will be automatically assigned for the device. Then log in to SMS specifying the address.
2)Starting the device in Download Mode Press [2] and [8] buttons at the same time on the control panel and turn on the main power switch to start the device in Download Mode. Note that SST backup function is enabled only in Download Mode. 3) Connecting the main unit to the PC to start SST Connect the main unit to the PC with SST installed using the crossing cable and the like to start SST on the PC. 4) Connecting the device using SST
2)SST Version Version 1.81 or later. An earlier version will not permit the use of the function. If needed, upgrade the SST. 3)Space for backup To back up the HDD of the iR, the PC must have approx 1024MB of free space at maximum. Sizes of backup files depend on actual data capacities to be backed up.
When starting SST, select the target device type as Single and click [Start] button.
Making a Backup and Formatting Hard Disk Drive with Service Support Tool
1)Switching Login Service / Backup of Login User Information If SSO-H is used for the login service, switch to default authentication before backing up the user information. Although SST will back up local device user information, it is recommended to export the user information just in case. For local device user information backup, go to User Management page of SSO-H site and export the data. (The SSO-H login page opens with the URL "http://<device IP address>:8000/sso/").
F-2-215
2-138
2
2-139
5)Generating backup data to transfer it to the PC (uploading) Click [Upload Data] button of SST and select Meapback.bin as the item to be backed up to click [ Start ] button.
F-2-216
6)Saving backup data Upon the backup data transferred to the PC, enter an appropriate file name and click [OK] to save the backup data on the PC.
F-2-219
3)Transferring Data When the data is successfully transferred, click the [OK] button shown on the screen. To continue other jobs, click [Return to Menu] button.
F-2-217
When the file is successfully saved, click [OK] button, and then click [Return to Menu] button.
F-2-220
4)Turn off and on the main power switch of the device to gain access in SMS to check that MEAP applications are surely restored. 5) Restore the backup data and setting saved before formatting HDD. Note that the user information of the local device is included in the backup data, thus does not need to be restored.
F-2-218
7) Formatting HDD Select HDFormat to connect the HDD unit and format all the partitions.
2-139
2
2-140
the user, and install them using the license files for reinstallation. Installation method is the same as normal installation. 5) As necessary, make login service selections and import user information. MEMO: When you replace the HDD without uninstalling MEAP applications, make sure to reinstall the previously installed applications. Unless reinstalling them, MEAP counter will not be released and the message "The number of applications that can be installed has exceeded the limit. Try to install this application after uninstalling other applications." is displayed so that the installation of new applications may not be accepted. If you want to install new applications in this case, once reinstall the applications in-stalled before formatting and uninstall unnecessary applications.
2-140
2
2-141
3) Press
or
[MEAPSAFE] button.
F-2-222
If default authentication has been selected, the mode of authentication remains valid; otherwise, the message "The login service must be set again with SMS" ap pears. Change the login service as necessary.
4) Press the 1 key on the control panel keypad to change the setting to '1'; then, click [OK] button.
F-2-221
2-141
2
2-142
5) Check that the notation 'MPSF' has appeared in the lower right corner of the screen; then, restart the device.
F-2-224
2-142
2
2-143
F-2-225
3) Press button.
or
HTTPS server Setting value is 0 through 65535 [the value at factory shipment/after clearing RAM: 8443] MEMO: As for port on HTTPS server, it only applies to the device that supports SSL function.
4) Press the port number to specify on the control panel (the numerical value input in the field is displayed), and press [OK] button.
F-2-227
2-143
2
2-144
5) Check to see that it is reflected in setting field, and turn off the main power, and then, restart the device. 4) Press the port number to specify on the control panel (the numerical value input in the field is displayed), and press [OK] button.
F-2-228
5) Check to see that it is reflected in setting field, and turn off the main power, and then,
F-2-231
F-2-229
2-144
2
2-145
Setting the USB driver for each USB device (MEAP driver preference registration) If it is set to use the system driver, the conventional applications that support the MEAP application driver cannot use the USB input device. Therefore, for the USB drivers used by USB devices/MEAP applications, there is setting function (MEAP driver preference registration) to give priority to the MEAP driver. If you register the ID of the USB device by using this function, the USB device can use the MEAP driver despite the Additional Function settings. Using this function requires the conditions below:
Supported MEAP SpecVer: 26 Describe the idVendeor(VID) and idProdutc(PID) of USB device in the manifest or activate/
deactivate the VID and PID by calling API from MEAP applications. The driver setting that is used in a manifest file is reflected in the following timing. When registering from a manifest file.
Availability for MEAP application of the USB device A (either HID keyboard or Mass Storage) plugged to iR device Registration status of USB device A
Not registered Registered
Can use USB keyboard. Cannot use USB Can work only on the keyboards. (Device conventional applications cannot be detected.) that support the MEAP application driver. Cannot use USB keyboards. (Device cannot be detected.) Can use USB keyboards.
YES YES
T-2-78
MEMO: When any settings changes are made, the device must be restarted.
2-145
2
2-146
Availability for MEAP applications of USB devices B and C (either HID keyboard or Mass Storage) plugged to iR device Registration Setting to use USB Native System status of MEAP driver device application driver USB device (Additional supported B Functions application mode)
Registered Not used (Native driver to be used) To be used Not used (Native driver to be used) To be used B C B C B C B C YES YES NO NO NO YES NO NO YES YES NO NO NO YES NO NO
MEAP application System driver Application not supported with VID/PID / conventional declared in application Manifest for B
NO NO YES YES YES NO YES YES
MEMO: The factory shipment default setting is to enable the use of native (main unit functionality) USB keyboards. Therefore, in order to use MEAP application keyboards, [Use MEAP driver for USB input device] under [System management settings (initial settings/ registration)] needs to be set to ON (factory shipment setting is OFF). Operations change as described below in accordance with ON/ OFF settings.
ON: when using MEAP application keyboard OFF: when using native (main unit functionality) keyboard (factory shipment default)
Not registered
Specifications for the use of USB keyboards Characters that could be entered on the software keyboard displayed on the conventional control panel can be entered using a USB connected keyboard.
When the software keyboard window is displayed, characters can be entered from the USB
keyboard (in-line entry not possible).
When the software keyboard window is not displayed, entered characters will not be
remembered.
The characters, which can be entered from a USB keyboard, is only a character, which can
be entered from the software keyboard.
Even if characters are entered from the USB keyboard, the software keyboard window will
not change (the corresponding key does not invert or change color).
Input from the USB keyboard can be accepted at the same time as input from the software
keyboard or numeric keys.
Since the device supports Plug and Play, the USB keyboard can be disconnected/
connected freely. However, do not disconnect and connect during in deep sleep (when in sleep with setting "low" at "the power consumption in sleep"). It is out of an operation guarantee to disconnect and connect the USB keyboard in deep sleep.
F-2-233
Keyboard layout is English. Moreover, the function key or the numeric key, which are not
displayed on the software keyboard, cannot be used. (Although the keyboard, which used for operation check, is 84 keyboard, it does not mean to guarantee the operation with any 84 keyboard.)
2-146
2
2-147
3) Press or button for several times until [USBM-CLR] is shown on the screen. 2) Press [COPIER] > [Function] > [MISC-P] > button. Press [USBM-CLR] button.
F-2-236 F-2-234
3) Press button.
or
F-2-237
F-2-235
2-147
2
2-148
5) When [OK] is shown on the status field, the status print is output. Check the contents of the print. USB device information Content Display the information of the USB device, which the device recognized. If not displayed, there may be some fault occurred. Some of standard optional devices are not displayed on a report. The details of each item are as follows. T : Topology Internal hierarchical structure, which a USB device is connected, is shown. The number of a connected bus, the hierarchical structure and connection speed can be indicated. D : Device Information of USB devices is shown.
F-2-239
P : Product Product information of USB devices is shown. Vendor ID and Product ID can be recognized here. S : String The character string embedded in a USB device is shown. A manufacture name and a product name can be recognized here.
C : Configure The configuration information of a USB device is shown. * mark is to know whether it is active. I : Interface The interface information of a USB device is shown. Interface class and the driver to handle can be recognized. The value and the content of Driver are as follows.
MEAP oreferred device information AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3 AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3 AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3 Application ID Vendor ID VID=04A9 VID=1234 VID=4321 Product ID PID=2680 PID=5678 PID=8765
Labeling
usbhid usb-storage irda-usb IrDA hub gpusb gpusbex
F-2-240
Content
It is displayed when the USB system driver is assigned to the input device connected. It is displayed when storage devices (USB memory storage etc.) are connected. It is displayed when the dongle is connected. It is displayed when HUB is connected. It is displayed when the USB driver only for MEAP application is assigned to the input device connected. It is displayed when a USB device, which specific vendor ID/ Product ID are preferentially registered using a manifest and MEAP API, is connected and the USB driver only for MEAP application is assigned.
T-2-80
2-148
2
2-149
E:Endpoint The Endpoint information of a USB device is shown. Right or wrong of report output Connecting device
HID Storage FAX USB Device Port
Reference material
Glossary
Terms & Acronyms
Application
User installation
Available Available Not available Not available Not available Not available Not available Not available Available
Report printing
Yes Yes No Yes Yes Yes No No Yes
T-2-81
IrDA Mutimedia Card Reader IC Card Reader Image Data Analyzer Board-A1 Hub Internal Hub* External Hub
* USB device port - B1 [USB Device Port-B1] Hub for device ports installed at the introduction The content of MEAP preferred device information Display the information of the application or a USB device, which preferentially registered with MEAP application. By seeing this information, it can check which Application ID of the MEAP application is in the status using a specific USB device. AppID : Application ID VID : Vendor ID PID : Product ID
CPCA Java CL (Class CPCA Java Class Library. A Java class library, which is used to control a Library) device. Default Authentication The login service used when the department ID control is used but other -Department ID authentication controls are not used. When the Department ID control is Management turned on, the login dialog prompts the users to enter the department ID and password. The dialog appears the initial screen of both the control panel on the MEAP device and Remote UI Device Specification ID Esplet (Esplet Type Application) File Description ID allocated to each device type. This represents CPCA API specification and the version number to use MFP generic functions or obtain information including maximum allowable copies. A MEAP application type created in Java. This type of applications do not show user interfaces either on Local UI or Web. Esplet is a coined word created by Canon, consisting of [Espresso] or Italian coffee and [let] derived from Applet/Service. An identifier for the OS to identify the destination file requested by a program. A program descriptor includes an identifier and information such as a file name and size, which helps OS to judge the file to be edited. HID stands for Human Interface Device, representing man-machine interfaces of PC components and peripheral devices. HID class means USB class classified as HID. The functionalities that existing imageRUNNER has such as Copy, Universal Send and Mailbox. Independent Software Vender. Software manufacturer who develops and/or sells applications and tools but does not entire computer systems. Refers application developer in this document.
HID class
2-149
2
2-150
Terms & Acronyms Definitions and Explanations Terms & Acronyms Definitions and Explanations
J2ME (Java2 Platform Java 2 Platform Micro Edition. One of Java Platforms licensed by Sun Micro Edition) Microsystems, Inc. It is applied for MEAP. Other devices such as cellular phones and PDA. J2RE (Java 2 Runtime Environment) A set of basic programs to run applications developed in the programming language of Java2. This set includes Java virtual machine providing runtime environment for Java applications among others. Java applets do not require J2RE since these are executed on Web browsers using Java runtime environment provided on browsers. However, standalone Java applications require Java runtime environment such as J2RE for execution. Runtime environments can be downloaded for free of charge from the Web site of Sun Microsystems, the Java developer. A programming language developed by Sun Microsystems, in the U. S. A. Low dependent on models and OSes and runs on various platforms. Taking advantage of this feature, many applications that runs on web servers uses Java. The MEAP platform uses J2ME - a type of Java. A script language developed by Netscape Communications, in the U.S. A., runs on web browsers such as Netscape Navigator and Internet Explorer. Allows web designers to create interactive pages with HTML files such as animated buttons and display of timetables. MEAP Specifications MEAP Spec Version, the term used for the SDK. The version number that (MEAP Spec Version) shows the APIs of the MEAP platform other than CPCA, such as network and security. The version number is not assigned for each device model. MEAP Application MEAP-enabled iR device MFP (Multi Function Peripheral) OSGi (Open Service Gateway Initiative) Portal Service Protocol Runs on MEAP platform. Consists of application files (*.jar) and the license file (*.lic). imageRUNNER (iR) devices with built-in MEAP platform. Multi Function Peripheral. Peripheral device that supports more than one function, such as digital copier, printer, scanner, and fax. Open Service Gateway Initiative. See "http://www.osgi.org/". The web portal to gain access to a MEAP-enabled device. This service has been integrated in Remote UI top page in iR Advanced series. A set of rules applied to data transmission procedures over network. Major communication protocols include: FTP: File Transfer Protocol. This is a communication protocol or protocolimplemented commands to provide file transfer between a host and clients over TCP/IP network. DHCP: An upward compatible protocol of BOOTP. This communication protocol allocates a dynamic IP address to each client machine upon communication startup on TCP/IP network and collects the allocated IP address when communication is completed. The server allocates one of multiple IP addresses and notifies the setup information to a client. BOOTP: A communication protocol to automatically load setup information including IP address and a domain name from the server to a client on TCP/IP network. RARP: A communication protocol to request IP address information via the network adaptor address (MAC address) of a client. IPP: A communication protocol to execute remote printing between the print server and clients via Internet. TCP/IP: A standard communication protocol required to access to Internet and other large-scale network. Provides functions to store data fetched from remote servers. When a user request to display a web page that has been displayed and stored in the proxy, the proxy server read the stored data but does not access the remote server where the original page is present, for efficient access services. When a proxy server receives a URL from a PC, it searches the file in the cache and sends it to the PC if the requested file is found. If the requested file is not stored in the cache, it accesses the remote server of the URL to acquire the file and, at the same time, stores the acquired file in the cache so that the proxy server can quickly send the file at the next request.
Java
JavaScript
Java VM JAVA Virtual Machine. The Java byte code interpreter. The Virtual Machine (Java Virtual Machine) acts as an interpreter for processing the byte code using the native instruction set. License Access Number Licensae File A number issued for accessing license file. The Licensing server requires entries of application ID, expiration date/times information, and the number of access numbers, to issue license access numbers A software manufacture of a MEAP application provides the users with the license files. Specifies the terms of agreement that a user concludes with the manufacturer. Required for installing a MEAP application.
LMS (License The license is required for installing a MEAP application in a MEAPManagement System) enabled iR device. LMS is the server issuing [License Files] as well as license access numbers. Login Service Manages user information of MEAP device. Authenticates users with user names and passwords. Three login services are available for MEAP device - Default Authentication, which provides department ID control, SDL (Simple Device Login) and SSO (Single Sign-On). Mass Storage means a storage device with large capacity, generally secondary storage devices. Mass Storage class means USB class classified in the secondary storage device group.
Proxy Server
MEAP (Multifunction Multifunctional Embedded Application Platform. Provides an environment Embedded Application for executing application programs on a peripheral device. Uses the Java Platform) platform (J2ME - Java 2 platform Micro Edition) to run Java application for MEAP. MEAP Contents iRequired to install an MEAP application to a MEAP device.
Redistribution module A built-in module of an application created with SDK. Applications without this module cannot work on MEAP platform.
2-150
2
2-151
Terms & Acronyms
SDK (Software Development Kit) Service Servlet (Servlet Type Application)
A functional unit or an application program working on MEAP platform. [Applications] are generally termed [Services] in Java world. A MEAP application type created in Java. This type of applications is designed to show user interface on the Web browser.
SMS The web-base service to provide user interfaces for application life cycle (Service Management management. Service) Socket A virtual interface of an application for network communication. A user only needs to specify a socket as a unit of an address and a port from an application. This establishes the network connection for data transmission, eliminating complication related to detailed communication procedures. Login service providing features of both local device authentication and domain authentication. The former is the method that iR device independently authorizes users; whereas the latter is that iR device links to the domain controller on the network in the Active Directory environment to authorize users. A unit for program execution. A multi-task system allowing multiple programs to run concurrently assigns a memory space and other resources independently to each program, providing users with a feel as if only a program is running. At least one thread is generated upon a program generated. The method to denote Web page locations on Internet and the like. For instance, a URL on the Web is denoted as [http://www.w3.org/default. html]. [http] at the beginning means that an address following this is in a web page on the Internet. Abbreviation of Universal Serial Bus. This is the interface standard to link between information devices. The general-purpose driver that control the behavior of the device, there are HID class driver, Mass Storage class driver and so on.
T-2-82
Thread
2-151
2
2-152 Error at starting up the MEAP application/Setting to hide JAM screen (level 2)
In the case that operation is restricted by MEAP application, hide the warning screen of error/ JAM (such as JAM screen, door opening, no-toner). In the case that these errors occur, there will be a display indicating 'call the service personnel' etc. MEMO: Part of the warning screens is displayed if shifting to the device screen.
Setting of Screen Transition from MEAP Screen to the Standard Screen (level2)
In the case that the operation is restricted by MEAP application, make a setting to hide Native applications such as Copy/Send/Box. With this setting, disable screen transition with => key. Default value 0: OFF (transit to Native screen) Setting range, item 0: OFF (transit to Native screen) 1: ON (No-transition to Native screen) Setting Procedure 1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then, by pressing [USER MODE] button again, [SERVICE MODE] screen is displayed). 2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button on control panel, the screen is displayed. 3) Press [COPIER] button. 4) Press [Option] button. 5) Press [DSPLY-SW] button. 6) Press or (arrow) button. 7) Press [MEAP-DSP] button. 8) Press either 0 (transit to Native screen) or 1 (no-transition to Native screen) on control panel (the numerical value input in the field is displayed), and press [OK] button. 9) Check to see that it is reflected in setting field, and restart the device.
As for the screens for jam and no-toner, the warning screen (animation) can be displayed by pressing the followings: [Device Screen] > [Recovery Procedure] As for the screen for door opening, the warning screen cannot be displayed because there is no display for [[Device Screen] > [Recovery Procedure]
Default value 1: No activation of warning display Setting range, item 0: display warning screen 1: hide warning screen Setting Procedure 1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then by pressing [USER MODE] button again, [SERVICE MODE] screen is displayed). 2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button on control panel, the screen is displayed. 3) Press [COPIER] button. 4) Press [Option] button. 5) Press [DSPLY-SW] button. 6) Press or (arrow) button. 7) Press [ANIM-SW] button. 8) Press either 0 (display warning screen) or 1 (hide warning screen) on control panel (the numerical value input in the field is displayed), and press [OK] button. 9) Check to see that it is reflected in setting field, and restart the device.
2-152
2
2-153
Embedded RDS
Product Overview
Overview
Embedded RDS (hereafter, referred to as E-RDS) is a network module embedded with customer's device and enables e-Maintenance/ imageWARE Remote (Remote Diagnosis System), which can collects and transmits status changes, counter values, error log and consumable information such as toner low/ out of the device to UGW via Internet. The following device information/ status can be monitored.
Service mode counter (Billing counts) Parts counter Mode counter Firmware info Service call errors log Jam log Alarm log Status changes (Toner low/ out, etc.)
Since high confidentiality is required for the information shown above, it performs communication between a device and a server using HTTPS/SOAP protocol.
UGW
DNS server
Proxy server
Intranet
F-2-241
2-153
2
2-154
E-RDS Setup
Confirmation and preparation in advance
To monitor a Copier/ MFP with e-Maintenance/ imageWARE Remote, the following settings are required. (1) Advance confirmation Confirm with the UGW administrator that the device to be monitored with e-Maintenance/ imageWARE Remote is registered in the UGW. (2) Advance preparations Interview the user's system administrator in advance to find out the following information about the network. Information item 1 IP address settings - Automatic setting (DHCP, RARP, BOOTP) - Manual setting IP address, subnet mask and gateway address to be set Information item 2 Is there a DNS server in use? - If there is a DNS server in use, find out the following. - Primary DNS server address - Secondary DNS server address Information item 3 Is there a proxy server? - If there is a proxy server in use, find out the following. - Proxy server address Information item 4 Is proxy server authentication required? - If proxy server authentication is required, find out the following. - User name and password required for proxy authentication - Port No. for proxy server (3) Network settings Based on the results of the information obtained in (2) Advance preparations, make the iR device network related settings in accordance with the following procedures.
a. Enter Settings/ Registration > Preference > Network > TCP/ IP settings > IPv4 settings > IP address settings. b. Set the IP address, based on the information obtained under (2) Advance preparations, Information item 1, described above. - For automatic acquisition, select from [DHCP], [RARP], [BOOTP]. - For manual setting, set the IP address, subnet mask and gateway address.
F-2-242
c. Touch [OK]. d. Select TCP/IP Settings from breadcrumbs of the left columns, and then Touch it. e. Enter DNS settings > DNS server address settings. f. Set the IP address, based on the information obtained under (2) Advance preparations, Information item 2, described above.
F-2-243
2-154
2
2-155
g. Touch [OK]. h. Select TCP/IP settings from breadcrumbs, then Touch it. i. Enter TCP/ IP settings > Proxy settings. j. Set the proxy server, based on the information obtained under (2) Advance preparations, Information item 3, described above. - Set Use Proxy to [On]. - Enter the server address and port Number.
F-2-245
m. Touch [OK]. n. Touch [OK] to quit the Settings/ Registration. o. Turn the device power OFF/ ON.
F-2-244
k. If proxy server authentication is required, Touch [Authentication Settings]. l. Set the following items, based on the information obtained under (2) Advance preparations, Information item 4, described above. - Use Proxy Authentication to [On]. - User name. - Password
2-155
2
2-156 Relevance to service mode
E-RDS settings Item
E-RDS
Script format
2 bytes
RGW-ADR
0: Disable/ 1:Enable e-Maintenance/ imageWARE Remote system to send device information, counter data, error statuses to the UGW. Default value is 0 (not in use) URL of UGW (default) https://a01.ugwdevice.net/ugw/agentif010 The UGW Port Number by default : 443 Validation: 1~ 65,535 Perform Communication test with UGW and set "OK!"/ "NG!" as the result. Detailed communication log displays the last 5 error information, consisting of data, error code, and error reasons up to now Max 30 latest loggings retained Max 128 characters for Error information. Reset E-RDS settings
T-2-83
CLEAR
F-2-246
* When [MODE LIST] is chosen, an operation guide will be displayed if the item set as the object of operation is selected and then a green [i] button located in the buttom of screen is touched. In case of [MODE LIST CLASSIC], this button is not appeared. [Service Browser] will be appeared after [BRWS-ACT] is set as Active (="1"), and after turning the power of the device Off/ On. (Default is off.)
Script format
Description
0: Disable (Service Call button is not appeared)/ 1: Enable ( The button is displayed) Default value is 0 (not in use)
T-2-84
Script format
Description
Activate Service Browsing. Browsing info is sent to UGW when OFF (BRWS-ACT=0) is changed to ACTIVE. Setting result is displayed as OK! / NG! Activate Service Browsing. Browsing info is sent to UGW when OFF (BRWS-ACT=0) is changed to ACTIVE. Setting result is displayed as OK! / NG!
T-2-85
F-2-247
b. Select Service mode > COPIER > Function > INSTALL > E-RDS, enter [1] and touch [OK]. This turns ON the function enabling the communication with the UGW.
2-156
2
2-157
F-2-248
F-2-250
The following settings i.e. RGW-PORT and RGW-ADR in servicemode must not be change unless there are specific instructions to do so. Changing these values will cause error in communication with UGW.
F-2-249
c. Select COM-TEST and then touch [OK]. This initiates the communication test between the device and the UGW. If the communication is successful, OK! is displayed. If NG! (failed) appears, refer to the troubleshooting guide and repeat until OK! is displayed.
F-2-251
2-157
2
2-158
Steps to Service Call button settings
In order to display a repair/ service call button on LUI, enter Servicemode, then select COPIER > Option > USER > SCALL-SW. and then set values as ON(1.) The default value is OFF(0.) If the function becomes effective, [Request] and [cancel] button will be shown on the bottom of the counter check screen. From the screen, if a user touches the button [Request], the notice through which it passes to UGW will be tried, and the following messages will be displayed. One [Request] is touched, the notice to UGW will be tried and below guidance will be displayed. Status
Request starts Done
F-2-252
User Message
The call will be sent, wait a while. The call has been sent. To cancel calling, touch the [Cancel request] The calling is failed. - (No message)
T-2-86
Failure In processing
After the service completion, service person in charge sets the completion flag ("1") from service mode > COPIER > Option > USER > SCALLCMP. If sets, the completion (pseudo alarm) will be notified to UGW, and Service Call button will be reset
2-158
2
2-159
Steps to Service Browser settings
a. Select and touch Servicemode > COPIER > Function > INSTALL > BRWS-ACT. OK! is displayed when the communication has done with UGW successfully, however NG! is displayed if failed. Case
When Service Browse is Activated (In case of operation from Off only.)
Description
1. Service Browser is enables from Servicemode menu. 2. Browsing data is sent to UGW. 3. If UGW replies, Service Browser is set 1 (:Active.) (Rebooting is required)
Transferred Info
Service Browser: Register WEB Browser option: On/ Off depending on the licensing.
Error retry
No. not attempted Service Browser is not activated. (Keep Off)
T-2-87
F-2-253
F-2-254
2-159
2
2-160
FAQ
Q1: Registration information of an E-RDS is once deleted from the UGW server, and is reregistered after that. If a communication test is not carried out, then device information on the UGW becomes invalid. A1: When registration of the E-RDS is deleted from the UGW, the status will be changed to that the communication test has not completed because related information has lost from a database. So, device information will also become invalid if that condition will be left for seven days without carrying out the communication test. Q2: A communication test with the UGW results NG! A2: The following cases can be considered in the becoming case. 1. Name resolution was failed due to an incorrect host name or DNS server has been halted. 2. Network cable is blocked off. 3. Proxy server settings is not correct. Q3: Let me know the interval of data transmitting from E-RDS to the UGW, and what data size is sent to the UGW? A3: The schedule of data transmitting, the start time are determined by settings in the UGW side. The timing is once per 16 hours by default, and counter data volume could be maximum 250 bytes. Q4: Some part of information seems to be suppressed as screens passes: Settings/ Registration > System administration settings > Network settings > TCP/ IP settings, when the device is connected with a PS server unit. How the authentication information such as CA certificate is dealt? A4: Although the device's been connected with the PS server unit, the data of the e-Maintenance/ imageWARE Remote system is able to pass through to the PS server unit. Therefore the e-Maintenance/ imageWARE Remote system functions normally even if the PS server unit is connected. The screen of IP Address settings is disabled though, the item related to authentication can be enabled. Q5: Does error-retry carry out at the time of a communication error with the UGW? A5: The retry of SOAP communication is performed as follows. 1. As for postAlert data, three times of data which failed transmitting to the UGW can be stored in RAMDISK and will be resent at the predetermined interval. When forth error occurred continuously, its data is stored in the HDD after eliminating the oldest data. The retry data will be sent at interval of 5 * n minutes. (n: retries, 5, 10, 15minutesup to 30 min) 2. As to postJamLog, postServiceCallLog and postAlarmLog, these retries depend on the
CPCA data which saved internally. Therefore if the data remains, these retries will be done. Q6: How many log-data can be stored? A6: Up to 30 log data can be accumulated. The data size of error information is maximum 128 bytes. Q7: Although Microsoft ISA as a proxy server is introduced, the authentication check is failed. Can E-RDS adopt with Microsoft ISA? A7: "Integrated" authentication is used for Microsoft ISA though, E-RDS must comply with "Basic." Therefore if you can change to "Basic" authentication on the server, the authentication with E-RDS can be done. Q8: Can I turn the device power off during the e-Maintenance/ imageWARE Remote system operation? A8: While operating the e-Maintenance/ imageWARE Remote system, the power of the device must be ON. If power OFF is needed, do not leave the device power OFF for long time. It will become "Device is busy, try later" errors if the power supply of network equipment such as HUB is made prolonged OFF. Q9: Although a Service call error may not be notified to UGW, the reason is what? A9: If a serviceperson in charge turns off the power supply of a device immediately after error occurred once, It may be unable to notify to UGW because data processing does not take a time from the controller of the device to NIC though, the data will be saved on the RAM. If the power supply is blocked off while starting up, the data will be inevitably deleted. Q10: Describe about the behavior of E-RDS while enabling the Real Deep Sleep functionality. A10: While being in Real Deep Sleep, and if data to be sent is in E-RDS, the system wakes up asleep, then starts to send the data to the UGW. The system also waits for completion of data transmission and let the device to shift to asleep status again. However, transition time to the Real Deep Sleep depends on the device, and the transition to sleep won't be done if the next data transmission will be done within 10 minutes. Q11: Is E-RDS compatible with Section counter (Department counter)? A11: No, E-RDS does not support Section counter. Q12: Is E-RDS operation possible to a device which used IPv6? A12: It depends on UGW side, however IPv6 has not been supported by UGW3.0.
2-160
2
2-161
Q13: In order to confirm Service mode menu transmission, are some set up by the device side? Moreover, what is Service mode menu set as the object of transmission? A13: No steps peculiar to Transmitting Servicemode menu. Following servicemode data will be sent to UGW at each event mentioned below. No.1 A communication test (COM-TEST) results NG! Causes: Initial settings or network conditions is incomplete. Remedy: Check and take actions mentioned below. 1) Check network connections Is the status indicator LED for the HUB port to which the main unit is connected ON? YES: Proceed to Step 2). NO: Check that the network cable is properly connected. 2) Confirm loop back address a) Settings/ Registration/ Registration > System administration settings > Network settings > TCP/ IP settings > IPv4 settings > PING command. Input 127.0.0.1, and touch the Start button.
Troubleshooting
F-2-256
Is the response from the host displayed? YES: Proceed to Step 3). NO: There is a possibility that the main unit's network settings are wrong. Check the details of the IPv4 settings once more.
F-2-255
3) Confirmation from another PC connected to same network. a) Request the user to ping the main unit from a PC connected to same network.
2-161
2
2-162
Does the main unit respond? YES: Proceed to Step 4). NO: Confirm the details of the main unit's IP address and subnet mask settings. 4) Confirm DNS connection a) Settings/ Registration > System administration settings > Network settings > TCP/ IP settings > DNS settings > DNS Server Address Settings, and note down both the primary and secondary DNS server addresses. will be displayed.
F-2-258
In the log, text strings that start with * are communication test (COM-TEST) error logs. (See line 5 in the illustration above.) "SUSPEND: Communication test is not performed" is displayed when the communication test has not completed excepting E-RDS disabled. "Event Registration is Failed " is displayed when either Jam, Alarm, Service call error, Alert
F-2-257
notifications is specified and semaphoring event is failed in the device. In other cases, it is outputted in the form of the following. [*] [Error strings] [Method name] [Error details provided by UGW] Touching on a line that begins with an will *(star) display further details, as per the illustration below.)
b) Touch Cancel. c) Settings/ Registration/ Registration > System administration settings > Network settings > TCP/ IP settings > IPv4 settings > PING command. Input the primary DNS server noted down in step a) as the IP address, and then touch Start. Is the response from the host displayed? YES: Proceed to step Troubleshooting using communication log. NO: Input the secondary DNS server noted down in step a) as the IP address, and then touch Start. Is the response from the host displayed? YES: Proceed to Troubleshooting using communication log. NO: There is a possibility that the DNS server address is wrong. Reconfirm the address with the user's system administrator. Remedy2: 1) Troubleshooting using communication log Enter Servicemode > Function > INSTALL > COM-LOG and the following communication log
2-162
2
2-163
COPIER > Function > INSTALL > E-RDS > COM-TEST about 60 seconds later. No.4 "Unknown error" is displayed though a communication test has done successfully. Causes: A certain problem was in the server side, or possibly a network load has been added. Remedy: The following points should be checked. 1. Change data transmission schedules, and then see how things going. 2. Try again after a period of time. If the same error persists, check the UGW status with a network and UGW administrator.
F-2-259
A detailed description of the error appears below 'Information'. Touch the OK button to return to the log screen.
No.5 Enabling Service Browser (BRWS-ACT) results NG! Cause: A communication test with UGW has not been performed yet.
No.2 A communication test results NG! even if network setting is set properly . Causes: No proper firmware has been installed, or E-RDS settings have not been completed. Remedy: The following points should be checked. 1. Check the firmware compatibility of device 2. Check network conditions such as proxy server settings and so on. 3. Check the E-RDS setting values. - Check the communication log from COM-LOG. - Check whether RGW-ADDRESS or RGW-PORT settings has changed.
F-2-260
No.3: There was a log, indicating "Device is not ready, try later" in error details of COM-LOG list. Causes: A certain problem occurred in networking. Remedy: Check and take actions mentioned below. 1) Check networking conditions and connections. 2) Turn on the power supply of a device and perform a communication test (servicemode >
Remedy: Touch COM-TEST and complete the communication test with UGW.
2-163
2
2-164
Code
8xxx 2029
Error strings
Server certificate verify error
Cause
The server certificate verification error occurred. (URL check error)
Remedy
Error strings
Cause
Remedy
Select and perform Service mode > Function > INSTALL > COM-TEST Turn the device OFF/ ON. If the error persists, replace the device system software. (Upgrade) Check that the value of Service mode > Function > Install > RGW-ADR is https://a01. ugwdevice.net/ugw/agentif010. Check the network connection, as per the initial procedures described in the troubleshooting.
SUSPEND: Communication The communication test had test is not performed. not been performed, though E-RDS is enabled. Event Registration is Failed Processing (event processing) within the device has failed. URL Scheme error(not https) The header of the URL of the registered UGW is not in https format. Displayed in the event of a TCP/IP communication fault. Also displayed when an attempt is made at communication with the device IP address not set. A URL different to that specified by the UGW has been set.
8xxx 2046
8xxx 2001
8xxx 200A
8xxx 2000
Unknown error
SOAP Fault
8xxx 2002
8xxx 2015
8xxx 2028
Could not connect to proxy server due to improper address. Proxy authentication is failed. Check the user name and password required in order to login to the proxy, and re-enter as needed. Could not connect to proxy Check that the proxy server server due to name resolution name is correct. If the proxy error. server name is correct, check the DNS connection, as per the troubleshooting initial procedures. No route certificate installed Install the latest device system in device. software. (Upgrade) - Certificate other than that initially registered in the user's operating environment is being used, but has not been registered with the device.
Check that the value of Service mode > Function>Install > RGW-ADR can be https://a01. ugwdevice.net/ugw/agentif010. Check proxy server address and re-enter as needed.
8xxx 2004
Check that Service mode > Function > Install > RGW-ADR can be https://a01.ugwdevice. net/ugw/agentif010.is correct. The device time and date Check that the device time is outside of the certificated and date are correctly set. If period. the device time and date are The route certificate correct, upgrade to the latest registered with the device has system software. expired. Certificate other than that initially registered in the user's operating environment is being used, but has not been registered with the device. Some other kind of Try again after a period of communication error has time. If persists, check the occurred. UGW status with the UGW administrator. SOAP communication error Check that the value of Service has occurred. mode > Function >Install > RGW-PORT can be 443. Displayed when Try again after a period of time. communication with UGW has If the same error occurs again, been successful, but an error check the UGW status with the of some sort has prevented UGW administrator. UGW from responding. When (Null) is displayed at the end of the message, this indicates that there has been an error in the HTTPS communication method. Displayed when Try again after a period of time communication with UGW and also check detailed error has been successful, but code (hexadecimal) from UGW an error of some sort has displayed after the message. prevented UGW from respon ding.(Hexadecimal) displayed at the end of the message is an error code returned by UGW. In the case of this kind of error only, [Server detailed error] is displayed at the end of the error information.
2-164
2
2-165
Code
8xxx 01010A01
Error strings
Device internal error
Cause
An internal error, such as memory unavailable, etc., has occurred during a device internal error phase. During the communication test, there has been some kind of error in the schedule values passed from UGW. Due to network congestion, etc., the response from UGW does not come within the specified time. (HTTPS level time out) There is a mistake in the UGW URL, and UGW cannot be accessed. (Path is wrong) A communication test has been attempted with the E-RDS switch being OFF.
Remedy
Switch the device power OFF/ ON or replace the device system software. (Upgrade) When the error occurs, report the details to the support section, then, after the UGW side has responded, try the communication test again. If this error occurs when the communication test is being run or Service Browser is being set, wait some time and run the test again. Check that the value of Service mode > Function > Install > RGW-ADR can be https://a01. ugwdevice.net/ugw/agentif010. Set Service mode > Function > Install > E-RDS to 1, and then run Service mode > Function > Install > COM-TEST. Check the device settings status with the UGW administrator. Check the network connection, as per the troubleshooting initial procedures. Run Service mode>Function> Install > COM-TEST about 60 seconds after turn on the device. Check Servicemode > #E-RDS > RGW-ADDRESS can be https://a01.ugwdevice.net/ugw/ agentif010. If not, enter the correct URL strings in URL description field.. Check that the value of Service mode > Function > Install > RGW-ADR can be https://a01. ugwdevice.net/ugw/agentif010. Perform and complete a communication test.
Code
0xxx 0003
Error strings
Communication test is not performed
Cause
Remedy
Perform and complete a communication test.
8xxx Server schedule is invalid 0201 0204, 0206 8xxx 2047 Server response time out
8xxx 2048
0xxx 0003
Server schedule is not exist Blank schedule data have been received from UGW. Network is not ready, try later Communication attempted without confirming network connection, just after booting up a device in which the network preparations are not ready. (Network connection not established within 60 seconds of device boot up.) The data which is not URL is inputted into URL field.
When BRWS-ACT is set.and postBrowserInfor is operated before completing a communication test 8xxx Server specified list is too Alert filtering error: The 0221 big number of elements of the list specified by the server is over restriction value. 8xxx Server specified list is Alert filtering error: Unjust 0222 wrong value is included in the element of the list specified by the server. xxxx SUSPEND: Initialize Internal error occurred at the xxxx Failure! initiating E-RDS. 8300 SRAM version unmatched! Improper value is written in at 0306 the head of SRAM domain of E-RDS. 8300 SRAM AeRDS version Improper value is written in at 0306 unmatch! the head of SRAM domain of Ae-RDS. 8xxx Device is busy, try later The semaphore consumption 0304 error at the time of a communication test. 8xxx Internal Schedule is broken The schedule data in the 0207 inside of E-RDS is not right. 0208 8xxx Operation is not supported Method which E-RDS is not 0004 supporting attempted. 8xxx Tracking ID is not match When upgrading firmware, 0709 the TrackingID notified by Updater differs from the thing of UGW designates.
Turn the device power OFF/ ON. Turn the device power OFF/ ON. Turn the device power OFF/ ON. Wait a while then rerun the test.
Perform the communication test. Contact help desk Contact help desk
8xxx 2052
URL error
T-2-88 *1. [Hexadecimal ] indicates an error code returned from UGW. [Error strings]: indicates error
8xxx 200B
0xxx 0003
2-165
2
2-166
Service cautions
1. After performing the following service actions, it is necessary to perform Service mode > COPIER > Function > Clear > ERDS-DAT and Service mode > COPIER > Function > INSTALL > COM-TEST. Failure to do so will result that the counter transmitting value to the UGW may become unusual.
System upgrade HDD format and system installation COPIER > Function > Clear > MN-CONT
Also, after replacing the main controller board, all settings must be reprogrammed. 2. The following settings in service mode must not be change unless there are specific instructions to do so. Changing these values will cause error in communication with UGW. Service mode > COPIER > Function > INSTALL > RGW-PORT Default: 443 Service mode > COPIER > Function >INSTALL > RGW-ADR Default: https://a01.ugwdevice.net/ugw/agentif010 3. Sublog settings To enable Sublogging, Servicemode > COPIER > FUNCTION > SYSTEM (LEVEL-2)> DEBUG-1, and then set "3"(Overwritten SUBLOG when Reboot/ Exception/ E-code detected) at DEBUG-1.
F-2-261
2-166
Periodical Service
Consumable Parts and Cleaning Parts Cleaning Parts
3
3-2
No. Category Part Name Part No Number Counter Adjustment (Yes/No) Remark Reference
Interval At installation 20K 50K 100K 120K 150K 300K 500K DRBL-1 DRBL-1 DRBL-1 DRBL-1 DRBL-1 DRBL-1
30 31 32 33 34
Cassette 1 feeding roller Cassette 2 feeding roller Cassette 1 separation roller Cassette 2 separation roller Multi-Purpose Tray Feed Roller Multi-Purpose Tray Separation Roller Pickup assembly idler gear
1 1 1 1 1 1
Cleaning with Dustblocking glass Cleaning tool Replacing when replace ITB cleaning blade Reference in A4 size, image ratio 5% Life of Drum unit For C5051 / C5045 85K For C5035 / C5030 59K Reference in A4 size, image ratio 5% Life of Drum unit For C5051 / C5045 85K For C5035 / C5030 59K Reference in A4 size, image ratio 5% Life of Drum unit For C5051 / C5045 85K For C5035 / C5030 59K Reference in A4 size, image ratio 5% Life of Drum unit For C5051 / C5045 171K For C5035 / C5030 169K For C5051 / C5045 For C5051 / C5045 For C5051 / C5045 For C5051 / C5045 For C5035 / C5030 For C5035 / C5030 For C5035 / C5030 For C5035 / C5030
35
36
FU3-0280
For Chinese model only. Replacing when replace feeding roller and separation roller. If necessary cleaning with alcohol If necessary cleaning with alcohol If necessary cleaning with alcohol If necessary cleaning with alcohol If necessary cleaning with lint-free paper Cleaning with lint-free paper If necessary cleaning
PT-DR-Y
37
38
PT-DR-M
39
40
Registration roller
PT-DR-C
41
Pre-registration guide
42
Transparency sensor
RH7-7129
43
with lint-free paper If necessary cleaning with alcohol If necessary cleaning with alcohol If necessary cleaning with alcohol If necessary cleaning with alcohol Cleaning with lint-free paper Cleaning with lint-free paper Cleaning with lint-free paper Cleaning with lint-free paper
DV-UNT-Y DV-UNT-M DV-UNT-C DV-UNT-K DV-UNT-Y DV-UNT-M DV-UNT-C DV-UNT-K TR-ROLC TR-ROLK 2TR-ROLL T/S-UNIT TR-BLT
44
45
46
47
Replacing when replace Cleaning when replace intermediary transfer belt (ITB) Clean with lint-free paper moistened with water 3 times in one direction For 100V For 120V For 230V secondary transfer outer roller
48
49
50
Vertical path sensor Lightproof Sheet Filter Toner filter Recycle toner container
FK2-6470
51 52 53
1 FC6-9817 FM3-5945 1 1
DRBL-1 DRBL-1
TN-FIL1 WSR-TNR
Cleaning when replace Film Unit Cleaning when replace Film Unit
T-3-1
3-2
3
3-3
Toner filter
F-3-1
3-3
3
3-4
Developing unit(Bk) Developing unit(C) Developing unit(M) Developing unit(Y)
Secondary transfer inner roller ITB cleaning blade Primary transfer roller
F-3-2
3-4
3
3-5
Fixing bearing
Roller pressure
Fixing bearing
F-3-3
3-5
3
3-6
Multi-Purpose Tray Feed Roller Multi-Purpose Tray Separation Roller Cassette feeding 1 roller Pickup idler gear Cassette separation 1 roller Cassette feeding 2 roller Cassette separation 2 roller Pickup idler gear
F-3-4
3-6
3
3-7
Cleaning Parts
[1] [2] [3] [19] [4] [18] [17] [16] [15] [14] [7] [6] [5]
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
Second Delivery Roller Third Delivery Roller Second/Third Delivery Inlet Roller Fixing Inner Delivery Roller Duplex Feed Upper Roller Fixing Delivery Guide Assembly Duplex Feed Lower Roller Registration Roller Pre-registration Guide Assembly Transparency Sensor Dust-blocking Glass Secondary Transfar Guide Assembly Feed Contact Point Guide Assembly Post-Fixing Roller First Delivery Roller
[13]
[13]
[13]
[13]
[12]
[11]
F-3-5
3-7
PartsReplacementandCleaning
List of Parts Main Controller Exposure System Laser Image Formation System Fixing System Pickup Feed System Option
4
ListofParts
ListofCover
4-2
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Name Readerrightretainingcover Readerfrontcover Controlpanelundercover Controlpaneluppercover Controlpanelsidecover1 Controlpanelsidecover2 Frontrightcover Frontuppercover Tonerreplacementcover Frontcover Leftgripcover Leftductcover Leftlowercover Leftuppercover Innerbottomcover Readerleftcover Readerleftretainingcover DFbaseleftcover Jampbasecover Readercablecover DFbaserightcover ServicePartsNo. FL2-9815 FC8-6095 FC9-4395 FC8-7818 FC8-7819 FC8-7820 FC8-4126 FC8-4146 FC8-4111 FC8-4123 FC8-4143 FC8-4140 FC8-4138 FC8-4139 FC8-4149 FC8-6098 FC8-6117 FC8-6115 FC8-6120 FL2-9816 FC8-6114 Refarence
[21] [20] [19] [18] [17] [1] [2] [3] [4] [5] [6] [16] [7] [15] [8] [14] [9]
T-4-1
[10]
4-2
4
[51] [50] [49] [48] [47] [46] [45] [44] [43] [42] [41] [40]
4-3
No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 Name Readerrearcover Readerrearundercover Leftrearsubcover Leftrearcover Rearcover Rearlowercover Filtercover Rightrearcover1 Conectorcover Rightrearcover2 Heaterswitchcover Rightrearcover3 Rightlowersubcover2 Rightlowersubcover3 Rightlowercover cassetrightuppersubcover2 Rightlowersubcover1 Cassetgrip cassetrightuppercover2 cassetrightuppersubcover1 cassetrightuppersubcover3 Rightfrontcover3 Stackbypasstraysubcover Rightfrontcover2 Stackbypasstray Rightfrontcover1 Grip Rightoutputframecover Rightuppercover Readerrightcover Inneroutputcover Outputframe Outputtrayguide Outputtray Innerlowercover Outputstopper Innerrearcover3 Innerrearcover2 Innerrearcover1 Innerrightcover ServicePartsNo. FC8-6096 FC8-6099 FC8-4142 FL3-3167 FL3-3166 FC8-4128 FC8-4130 FC8-5377 FC8-5200 FC8-4131 FC8-4137 FC8-4135 FC8-5298 FC8-5335 FC8-4875 FC8-4922 FC8-4845 FC8-4861 FC8-4134 FC8-5105 FC8-4921 FC8-5100 FC8-4153 FC8-4835 FC8-5110 FL3-1186 FL2-9818 FC8-4936 FL3-1127 FL2-9483 FC8-4144 FC8-4154 FC8-4766 FC8-4917 FC8-4145 FC8-4915
T-4-2
Refarence
[26]
[27]
[28] [39] [38] [37] [36] [30] [35] [34] [33] [32]
F-4-2
[29]
[31]
4-3
4
Inner rear cover 2 Inner rear cover 3
4-4
Inner output cover
Output tray
F-4-3
No.
[52] [53] [54] [55] [56] [57] [58] [59] [60]
Name
Inneroutputcover Outputframe Outputtrayguide Outputtray Outputstopper Innerrearcover3 Innerrearcover2 Innerrearcover1 Innerrightcover
ServicePartsNo.
FC8-4936 FL3-1127 FL2-9483 FC8-4144 FC8-4766 FC8-4917 FC8-4145 FC8-4915
Refarence
T-4-3
4-4
4
ListofMainUnit
UnitLayout
4-5
Secondary transfer inner roller ITB cleaning blade Primary transfer roller
F-4-4
4-5
4-6
ITB Unit Toner container[Bk] ITB Cleaning Unit Toner container[C] Toner container[M] Toner container[Y] Drum Unit[Bk]
Developing Assembly[Bk] Drum Unit[C] Developing Assembly[C] Drum Unit[M] Developing Assembly[M] Drum Unit[Y] Developing Assembly[Y]
Process Unit
F-4-5
4-6
4-7
Multi-Purpose Tray Feed Roller Multi-Purpose Tray Separation Roller Cassette feeding 1 roller Pickup idler gear Cassette separation 1 roller Cassette feeding 2 roller Cassette separation 2 roller Pickup idler gear
F-4-6
4-7
4-8
No. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] Name ControlPanel Recycletonercontainer HopperUnit Tonercontainer(Y) Tonercontainer(M) Tonercontainer(C) Tonercontainer(Bk) ITBUnit ITBCleaningUnit DrumUnit(Y) DrumUnit(M) DrumUnit(C) DrumUnit(Bk) DevelopingAssembly(Y)(C5051/C5045) DevelopingAssembly(M)(C5051/C5045) DevelopingAssembly(C)(C5051/C5045) DevelopingAssembly(Bk)(C5051/C5045) DevelopingAssembly(Y)(C5035/C5030) DevelopingAssembly(M)(C5035/C5030) DevelopingAssembly(C)(C5035/C5030) DevelopingAssembly(Bk)(C5035/C5030) ProcessUnit LaserScannerUnit(C5051/C5045) LaserScannerUnit(C5035/C5030) SecondandThirdDeliveryUnit Multi-purposeDeliveryUnit FirstDeliveryUnit RightDoorUnit FixingAssembly Cassette1PickupUnit Cassette2PickupUnit Cassette1 Cassette2 MainDriveUnit ServicePartsNo. FM3-7992 FM3-5945 NPN NPN NPN NPN NPN NPN FM3-5932 Refarence
FM3-8977 FM3-8978 FM3-8979 FM3-8939 FM3-8973 FM3-8974 FM3-8975 FM3-8976 NPN FM3-5420 FM3-5425 FM3-5999 FM3-6013 FM3-5977 FM3-6006 NPN FM3-5935 FM3-9230 NPN NPN NPN
4-8
4
Clutch/Solenoid
4-9
Third delivery flapper solenoid (SL7) Cassette 1 pickup solenoid (SL2) Second delivery flapper solenoid (SL6) First delivery flapper solenoid (SL5)
Name Cassette1pickupsolenoid Cassette2pickupsolenoid First delivery flapper solenoid Second delivery flapper solenoid Third delivery flapper solenoid
Refarence
4-9
4-10
F-4-9
Refarence
4-10
4-11
Toner supply clutch (Bk)(CL5) Toner supply clutch (C)(CL4) Toner supply clutch (M)(CL3) Toner supply clutch (Y)(CL2)
Refarence
T-4-4
4-11
4
Motor
4-12
Toner container motor (Bk) (M12) Toner container motor (C) (M11) Toner container motor (M) (M10) Toner container motor (Y) (M9) Duplex feed motor (M20)
F-4-10
4-12
4
No. M9 M10 M11 M12 M16 M17 M18 M19 M20
4-13
Name Tonercontainermotor(Y) Tonercontainermotor(M Tonercontainermotor(C) Tonercontainermotor(Bk) Cassette1pickupmotor Cassette2pickupmotor Multi-purposemotor Registrationmotor Duplexfeedmotor MainUnit Deviceparts(rear) Deviceparts(rear) Deviceparts(rear) Deviceparts(rear) cassette cassette Deviceparts(rear) Deviceparts(rear) Deviceparts(rear) ServicepartsNo. FK2-7307 FK2-7307 FK2-7307 FK2-7307 FK2-7326 FK2-7326 FK2-7304 FK2-7327 FK2-7326 Refarence
T-4-5
4-13
4-14
Refarence
T-4-6
4-14
4-15
Primary transfer separation motor (M15)
Reverse roller motor (M24) First & Second delivery motor (M23) ITB motor (M13)
Image skew correction motor (C) (M33) Image skew correction motor (Bk) (M34) Image skew correction motor (Y) (M31) Image skew correction motor (M) (M32) Scanner motor (CBk) (M30) Recycle toner stirring motor (M26)
4-15
4
M13 M14 M15 M23 M24 M25 M26 M29 M30 M31 M32 M33 M34
4-16
Name ITBmotor ITBdisplacementcontrolmotor Primarytransferseparationmotor First&Seconddeliverymotor Reverserollermotor Thirddeliverymotor Recycletonerstirringmotor Scannermotor(YM) Scannermotor(CBk) Imageskewcorrectionmotor(Y) Imageskewcorrectionmotor(M Imageskewcorrectionmotor(C) Imageskewcorrectionmotor(Bk) MainUnit ITBUnit ITBUnit ITBUnit SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit ProcessUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit ServicepartsNo. FK2-7300 FK2-0481 FK2-0481 FK2-7304 FK2-7304 FK2-7304 FK2-7328 FK2-8602 FK2-8602 RH7-1501 RH7-1501 RH7-1501 RH7-1501 Refarence
No.
T-4-7
4-16
4-17
Drum motor (Bk) (M4) Drum motor (C) (M3) Drum motor (M) (M2) Drum motor (Y) (M1)
Developing motor (Bk) (M8) Developing motor (C) (M7) Developing motor (M) (M6) Developing motor (Y) (M5)
F-4-11
4-17
4
M1 M2 M3 M4 M5 M6 M7 M8
4-18
Name Drummotor(Y) Drummotor(M) Drummotor(C) Drummotor(Bk) Developingmotor(Y) Developingmotor(M) Developingmotor(C) Developingmotor(Bk) MainUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit ServicepartsNo. FK2-7298 FK2-7298 FK2-7298 FK2-7298 FK2-7303 FK2-7303 FK2-7303 FK2-7303 Refarence
No.
T-4-8
4-18
4
Fan
4-19
Fixing heat exhaust fan 2 (FM2) Fixing heat exhaust fan 1 (FM1)
F-4-12
4-19
4-20
Fixing cooling fan (rear) (FM6) Secondary transfer exhaust fan (FM8)
F-4-13
4-20
4-21
Controller fan 3 (FM13) Controller fan 1 (FM11) Controller fan 2 (FM12) HDD cooling fan (FM14)
F-4-14
4-21
4
No. FM1 FM2 FM3 FM4 FM5 FM6 FM7 FM8 FM9 FM10 FM11 FM12 FM13 FM14
4-22
Name Fixingheatexhaustfan1 Fixingheatexhaustfan2 Powersupplycoolingfan Processcartridgefan(rear) Fixingcoolingfan(front) Fixingcoolingfan(rear) Deliveryfan1 Secondarytransferexhaustfan Deliveryfan2 Processcartridgefan(front) Controllerfan1 Controllerfan2 Controllerfan3 HDDcoolingfan MainUnit Deviceparts(rear) Deviceparts(rear) Electric Deviceparts(center) Deviceparts(center) Deviceparts(center) Deviceparts(center) Deviceparts(center) Deviceparts(front) Deviceparts(center) Electric Electric Electric Electric ServicepartsNo. FK2-7286 FK2-3679 FK2-7286 FK2-0360 FK2-3679 FK2-3679 FK2-7362 FK2-7290 FK2-7291 FK2-3679 FK2-8372 FK2-8372 FK2-8372 FK2-7363 Refarence
T-4-9
4-22
4
Sensor
4-23
Third delivery sensor (PS43) Fixing pressure sensor (PS30) Inner delivery sensor (PS37)
Second delivery sensor (PS42) Duplex inlet sensor (PS40) Reverse sensor (PS39)
Primary transfer detachment sensor 2 (PS23) Primary transfer detachment sensor 1 (PS22) ITB steering sensor (PS24)
F-4-15
4-23
4
No. PS22 PS23 PS24 PS25 PS26 PS27 PS28 PS30 PS31 PS32 PS37 PS39 PS40 PS42 PS43 PS45
4-24
MainUnit ITBUnit ITBUnit ITBUnit ITBUnit ITBUnit ITBUnit ITBUnit FixingAssembly FixingAssembly FixingAssembly FixingAssembly SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit SecondandThirdDeliveryUnit ServicepartsNo. WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 Refarence
Name Primarytransferdetachmentsensor1 Primarytransferdetachmentsensor2 ITBsteeringsensor ITBdisplacementsensor1 ITBdisplacementsensor2 ITBdisplacementsensor3 ITBdisplacementsensor4 Fixingpressuresensor ShutterHPsensor Shutterpositionsensor Innerdeliverysensor Reversesensor Duplexinletsensor Seconddeliverysensor Thirddeliverysensor Seconddeliverytrayfullsensor
T-4-10
4-24
4-25
[16] [1] [2]
[12] [11]
[13]
[14]
[15]
[3]
[10] [4] [9] [7] [8] [6] [5] Bk drum rotation sensor 2 (UN38) Bk drum rotation sensor 1 (UN37) C drum rotation sensor 2 (UN36) C drum rotation sensor 1 (UN35) M drum rotation sensor 2 (UN34) M drum rotation sensor 1 (UN33) Y drum rotation sensor 2 (UN32) Y drum rotation sensor 1 (UN31)
New/old detection fuse (Bk) (UN59) New/old detection fuse (C) (UN58) New/old detection fuse (M) (UN57) New/old detection fuse (Y) (UN56)
ATR sensor (Bk) (TS8) ATR sensor (C) (TS7) ATR sensor (M) (TS6) ATR sensor (Y) (TS5)
4-25
4
INDEXNo. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] No. TS5 TS6 TS7 TS8 UN31 UN32 UN33 UN34 UN35 UN36 UN37 UN38 UN56 UN57 UN58 UN59
4-26
F-4-16
No. PS8 TS4 PS4 TS3 PS3 TS2 PS2 PS1 TS1 PS5 PS9 PS10 PS6 PS11 PS7 PS12
Name TonercontainercamHPsensor(Bk) Piezosensor(Bk) Tonersupplysensor(Bk) Piezosensor(C) Tonersupplysensor(C) Piezosensor(M) Tonersupplysensor(M) Tonersupplysensor(Y) Piezosensor(Y) TonercontainercamHPsensor(Y) Tonercappositionsensor(Y) Tonercappositionsensor(M) TonercontainercamHPsensor(M) Tonercappositionsensor(C) TonercontainercamHPsensor(C) Tonercappositionsensor(Bk) Name
MainUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit HopperUnit MainUnit DevelopingAssembly DevelopingAssembly DevelopingAssembly DevelopingAssembly MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit MainDriveUnit DrumUnit DrumUnit DrumUnit DrumUnit
ServicePartsNo. WG8-5848 FK2-0590 WG8-5848 FK2-0590 WG8-5848 FK2-0590 WG8-5848 WG8-5848 FK2-0590 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 ServicepartsNo. FK2-7872 FK2-7872 FK2-7872 FK2-7872 FM3-7944 FM3-7944 FM3-7944 FM3-7944 FM3-7944 FM3-7944 FM3-7944 FM3-7944 FM2-3472 FM2-3472 FM2-3472 FM2-3472
Refarence
Refarence
T-4-11
ATRsensor(Y) ATRsensor(M) ATRsensor(C) ATRsensor(Bk) Ydrumrotationsensor1 Ydrumrotationsensor2 Mdrumrotationsensor1 Mdrumrotationsensor2 Cdrumrotationsensor1 Cdrumrotationsensor2 Bkdrumrotationsensor1 Bkdrumrotationsensor2 New/olddetectionfuse(Y) New/olddetectionfuse(M) New/olddetectionfuse(C) New/olddetectionfuse(Bk)
T-4-12
4-26
4-27
Right door sensor (PS20) First delivery tray full sensor (PS44) Second & third delivery door sensor (PS21) First delivery sensor (PS41)
Transparency sensor (UN51) Registration sensor (PS33) Environment sensor 1 (UN22) Laser shutter sensor (PS29) Patch sensor (rear) (UN48)
Patch sensor (center) (UN49) Vertical path sensor (UN53) Patch sensor (front) (UN47) Toner container outer cover sensor (PS17)
Front door sensor (PS18) Toner container inner cover sensor (Bk) (PS16) Toner container inner cover sensor (C) (PS15) Toner container inner cover sensor (M) (PS14) Toner container inner cover sensor (Y) (PS13)
F-4-17
4-27
4
No. PS13 PS14 PS15 PS16 PS17 PS18 PS20 PS21 PS29 PS33 PS35 PS36 PS41 PS44 UN22 UN47 UN48 UN49 UN50 UN51 UN53
4-28
Name Tonercontainerinnercoversensor(Y) Tonercontainerinnercoversensor(M) Tonercontainerinnercoversensor(C) Tonercontainerinnercoversensor(Bk) Tonercontaineroutercoversensor Frontdoorsensor Rightdoorsensor Second&thirddeliverydoorsensor Lasershuttersensor Registrationsensor Fixingarchsensor1 Fixingarchsensor2 Firstdeliverysensor Firstdeliverytrayfullsensor Environmentsensor1 Patchsensor(front) Patchsensor(rear) Patchsensor(center) Environmentsensor2 Transparencysensor Verticalpathsensor MainUnit DeviceParts(front) DeviceParts(front) DeviceParts(front) DeviceParts(front) DeviceParts(front) DeviceParts(front) DeviceParts(center) DeviceParts(center) DeviceParts(center) DeviceParts(center) 2-sideUnit 2-sideUnit DeviceParts(center) DeviceParts(center) DeviceParts(center) DeviceParts(center) DeviceParts(center) DeviceParts(center) Electric DeviceParts(center) DeviceParts(center) ServicepartsNo. WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 FM3-7941 FK2-7315 FK2-7315 FK2-7316 WP2-5264 RH7-7129 FK2-6470 Refarence
T-4-13
4-28
4-29
Right lower door sensor (PS19) Cassette 1 pre-registration sensor (PS55) Cassette 1 paper sensor (PS49) Cassette 2 pre-registration sensor (PS56)
Cassette 1 paper level sensor B (PS52) Cassette 2 paper sensor (PS50) Cassette 2 paper level sensor A (PS53) Cassette 2 paper level sensor B (PS54)
4-29
4
No. PS19 PS38 PS47 PS49 PS50 PS51 PS52 PS53 PS54 PS55 PS56 UN52
4-30
MainUnit 2-sideUnit 2-sideUnit Multi-purposeDeliveryUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit CassettePickupUnit Multi-purposeDeliveryUnit ServicepartsNo. WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 WG8-5848 FH7-7600 Refarence
Name Rightlowerdoorsensor Duplexpapersensor Multi-purposepapersensor Cassette1papersensor Cassette2papersensor Cassette1paperlevelsensorA Cassette1paperlevelsensorB Cassette2paperlevelsensorA Cassette2paperlevelsensorB Cassette1pre-registrationsensor Cassette2pre-registrationsensor Multi-purposesizesensor
T-4-14
4-30
4
Heater/Other
4-31
Sub thermistor 2 (TH1) Temperature fuse (TP1) Main thermistor 2 (TH1) Main thermistor 1 (TH1) Sub thermistor 1 (TH1)
F-4-18
4-31
4-32
Speaker (SP1)
F-4-19
4-32
4
No. ELCB1 H1 H2 SP1 TH1 TH1 TH1 TH1 TP1
4-33
Name Leakagebreaker Fixingheater Drumheater(Bk) Speaker Mainthermistor2 Mainthermistor1 Subthermistor1 Subthermistor2 Temperaturefuse MainUnit Electric FixingAssembly ProcessUnit Electric FixingAssembly FixingAssembly FixingAssembly FixingAssembly FixingAssembly ServicepartsNo. FH7-7626 FK2-7292 FK2-7295 FK2-0428 FK2-7312 FK2-7312 FK2-7312 FK2-7312 FK2-7314 Refarence
T-4-15
4-33
4
Switch
4-34
AC interlock switch (SW5) Cassette 1 size switch B (SW7) Cassette 1 size switch A (SW6) DC interlock switch 1 (SW3)
DC interlock switch 2 (SW4) Cassette 2 size switch B (SW9) Cassette 2 size switch A (SW8)
F-4-20
4-34
4-35
F-4-21
4-35
4-36
Name Mainpowersupplyswitch Environmentswitch DCinterlockswitch1 DCinterlockswitch2 ACinterlockswitch Cassette1sizeswitchA Cassette1sizeswitchB Cassette2sizeswitchA Cassette2sizeswitchB MainUnit Electric Electric DeviceParts(front) DeviceParts(front) DeviceParts(rear) Cassette Cassette Cassette Cassette ServicepartsNo. FK2-7264 WC1-5179 FK2-0506 FK2-0506 FK2-3076 WC2-5680 WC2-5680 WC2-5680 WC2-5680 Refarence
No. SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9
4-36
4
PCB
4-37
Hub PCB
Ten key PCB Inverter PCB Sub key PCB CPU PCB Volume PCB
Toner sensor relay PCB (M) (UN40) Toner sensor relay PCB (Y) (UN39)
Laser driver PCB (C) (UN15) Laser driver PCB (Bk) (UN14) Laser driver PCB (Y) (UN13) Laser driver PCB (M) (UN12)
F-4-22
4-37
4
No. C5051/C5045 UN12 UN13 UN14 UN15 C5035/C5030 UN12 UN13 UN14 UN15 UN39 UN40 UN41 UN42
4-38
Name MainUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit LaserScannerUnit HopperUnit HopperUnit HopperUnit HopperUnit ServicepartsNo. FM3-5420 FM3-5420 FM3-5420 FM3-5420 FM3-5425 FM3-5425 FM3-5425 FM3-5425 FM3-7948 FM3-7948 FM3-7948 FM3-7948 Refarence
LaserdriverPCB(M) LaserdriverPCB(Y) LaserdriverPCB(Bk) LaserdriverPCB(C) LaserdriverPCB(M) LaserdriverPCB(Y) LaserdriverPCB(Bk) LaserdriverPCB(C) TonersensorrelayPCB(Y) TonersensorrelayPCB(M) TonersensorrelayPCB(C) TonersensorrelayPCB(Bk)
4-38
4-39
Developing sub bias PCB (Bk) (UN46) Developing sub bias PCB (C) (UN45)
Developing sub bias PCB (M) (UN44) Developing sub bias PCB (Y) (UN43)
Bk pre-exposure LED PCB (rear) (UN30) C pre-exposure LED PCB (rear) (UN28) M pre-exposure LED PCB (rear) (UN26) Y pre-exposure LED PCB (rear) (UN24) Drum unit new/old detection PCB (UN19)
Recycle toner sensor PCB (UN21) C pre-exposure LED PCB (front) (UN27) Process unit relay PCB (UN20) M pre-exposure LED PCB (front) (UN25) Y pre-exposure LED PCB (front) (UN23)
F-4-23
4-39
4-40
Name Drumunitnew/olddetectionPCB ProcessunitrelayPCB RecycletonersensorPCB Ypre-exposureLEDPCB(front) Ypre-exposureLEDPCB(rear) Mpre-exposureLEDPCB(front) Mpre-exposureLEDPCB(rear) Cpre-exposureLEDPCB(front) Cpre-exposureLEDPCB(rear) Bkpre-exposureLEDPCB(front) Bkpre-exposureLEDPCB(rear) DevelopingsubbiasPCB(Y) DevelopingsubbiasPCB(M) DevelopingsubbiasPCB(C) DevelopingsubbiasPCB(Bk) MainUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit ProcessUnit DevelopingAssembly DevelopingAssembly DevelopingAssembly DevelopingAssembly ServicepartsNo. FM3-7940 FM3-7938 FM3-7949 FM3-7945 FM3-7945 FM3-7945 FM3-7945 FM3-7945 FM3-7945 FM3-7945 FM3-7945 FM3-7951 FM3-7951 FM3-7951 FM3-7951 Refarence
No. UN19 UN20 UN21 UN23 UN24 UN25 UN26 UN27 UN28 UN29 UN30 UN43 UN44 UN45 UN46
T-4-16
4-40
4-41
Cassette feed driver PCB (UN3) Pickup feed driver PCB (UN2) Relay PCB (UN5)
AC driver PCB (UN6) AC sub driver PCB (UN7) All-night power PCB (UN9) 12V power supply PCB (UN11) 24V power supply PCB 1 (UN8)
F-4-24
4-41
4-42
Name DCcontrollerPCB PickupfeeddriverPCB CassettefeeddriverPCB DrumdriverPCB RelayPCB ACdriverPCB ACsubdriverPCB 24VpowersupplyPCB1 All-nightpowerPCB 24VpowersupplyPCB2 12VpowersupplyPCB HVT1PCB HVT2PCB HVT3PCB MainUnit Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric ServicepartsNo. FM3-7931 FM3-7932 FM3-7933 FM3-7934 FM3-7935 FM3-7936 FM3-7950 FM3-7955 FK2-6324 FK2-6448 FK2-6319 FK2-7348 FK2-7349 FK2-7350 Refarence
No. UN1 UN2 UN3 UN4 UN5 UN6 UN7 UN8 UN9 UN10 UN11 UN16 UN17 UN18
T-4-17
4-42
4
Conector
4-43
24 23 22 25 1 26 17 2 3 25 9 13 4 5 8 6 7 31 18 14 29 30 28 25 25
10
12 16
19
27
20 21 11
F-4-25
4-43
4
KeyNo.
1 2 3 3 3 4 5 5 6 7 7 8 8 9 9 9 9 9 9 10 10 10 10
4-44
PartsName
DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB
JNo.
J102 J103 J104 J104 J104 J106 J107 J107 J109 J110 J110 J111 J111 J112 J112 J112 J112 J112 J112 J114 J114 J114 J114
Symbol
UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1
IntermediateConnector
KeyNo.
11 12 13 14 16 17 18 19 20 21 22 23 24 25 25 25 25 26 27 28 29 30
JNo.
J822 J202 J1300 J810 J3002 J231 J201 J311 J313 J654 J653 J656 J655 J5061 J42 J42 J42 J42 J657 J863 J864 J853 J854
Symbol
UN2 UN22 UN50 UN3 UN2 UN4 UN4 UN16 UN16 UN17 UN17 SW1 TH1 TH1 TH1 TH1 UN18 UN14 UN15 UN12 UN13
PartsName
ECO-ID PickupfeeddriverPCB Environmentsensor1 Environmentsensor2 CassettefeedingUnit-AD1 CassettefeeddriverPCB PickupfeeddriverPCB DrumdriverPCB DrumdriverPCB HVT1PCB HVT1PCB HVT2PCB HVT2PCB Mainpowersupplyswitch Mainthermistor1 Mainthermistor2 Subthermistor1 Subthermistor2 HVT3PCB LaserdriverPCB(Bk) LaserdriverPCB(C) LaserdriverPCB(M) LaserdriverPCB(Y)
T-4-18
J5076 J5076
J5066
J5044 J5044
4-44
4-45
34 33
35
19 24 31 32 21 20
15 16 14 13
1 3 30 10 9 25
11
12 6 5 4
18 17
F-4-26
4-45
4
KeyNo.
1 1 2 2 3 4 5 5 5 6 7 8 8 9 9 10 11 11 12 12 12
4-46
PartsName
DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB DCcontrollerPCB
JNo.
J118 J118 J119 J119 J121 J122 J123 J123 J123 J124 J125 J126 J126 J127 J127 J132 J136 J136 J138 J138 J138
Symbol
UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1 UN1
IntermediateConnector
J825 J825 J823 J823
KeyNo.
13 14 15 16 17 18 19 20 21 24 25 30 31 32 33 34 35
JNo.
J102 J203 J102 J203 J401 J402 J6087 J6086 J6085 J6084 J203 J815 J816 J809 J813 J5042 J2111 J2111 J6140 J6141 J6142
Symbol
UN13 UN12 UN15 UN14 UN5 UN5 PS34 PS36 PS35 M21 UN2 SW3 SW4 M25 M24 M23
PartsName
LaserdriverPCB(Y) LaserdriverPCB(M) LaserdriverPCB(C) LaserdriverPCB(C) RelayPCB RelayPCB Fixinginletsensor Fixingarchsensor2 Fixingarchsensor1 Fixingmotor PickupfeeddriverPCB BufferPassUnit-G1 InnerFinisher-A1 BookletFinisher-C1/StapleFinisher-C1 PaperDeckUnit-B1 KeySwitchUnit DCinterlockswitch1 DCinterlockswitch2 Thirddeliverymotor Reverserollermotor First&Seconddeliverymotor
T-4-19
4-46
4-47
20 26 6 19 25 23 11 31 21 22 7 29 27 17 16 12 10 18 8 28
24
13
14 15
3 2
F-4-27
4-47
4
KeyNo.
1 1 1 1 1 1 2 2 2 2 2 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5
4-48
PartsName
PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB
JNo.
J204 J204 J204 J204 J204 J204 J205 J205 J205 J205 J205 J207 J207 J207 J210 J210 J210 J210 J210 J210 J210 J210 J212 J212 J212 J212
Symbol
UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2
IntermediateConnector
J5003 J5003 J5003 J5003 J5003 J5003 J5050 J5050 J5050 J5050 J5050 J5048 J5048 J5048 J5032 J5032 J5032 J5032 J5032 J5032 J5032 J5032 J5028 J5028 J5028 J5028 J5109
KeyNo.
6 7 8 9 11 12 10 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31
JNo.
J6058 J6091 J6088 J6099 J6070 J6062 J900 J901 J600 J6111 J6110 J6108 J6107 J6106 J6076 J6075 J6074 J6073 J6065 J6089 J6090 J6092 J6077 J6081 J6171 J5100
Symbol
M22 PS44 PS41 PS21 FM9 UN19 UN19 UN20 M26 UN21 UN49 UN48 UN47 PS40 PS43 SL7 SL6 SL5 PS42 PS39 PS45 PS38 UN52 PS47 PS19
PartsName
Fixingdeliverymotor Firstdeliverytrayfullsensor Firstdeliverysensor Second&thirddeliverydoorsensor Deliveryfan2 Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB ProcessunitrelayPCB Wastetonerstirringmotor WastetonersensorPCB Patchsensor(center) Patchsensor(rear) Patchsensor(front) Duplexinletsensor Thirddeliverysensor Third delivery flapper solenoid Second delivery flapper solenoid First delivery flapper solenoid Seconddeliverysensor Reversesensor Seconddeliverytrayfullsensor Duplexpapersensor Multi-purposesizesensor Multi-purposepapersensor Rightlowerdoorsensor
T-4-20
J5110
J5051 J5051 J5051 J5051 J5051 J5046 J5046 J5046 J5108 J5097 J5097 J5106 J5106 J5106 J5054 J5099 J5099
J601 J601
J5083 J5083
4-48
4-49
14 13 33 10 12 11 20
21
32 31 26 17 30 34 15 16 29
18 9 8
22 23
19
24
27 25
F-4-28
4-49
4
KeyNo.
1 1 1 1 1 1 1 1 2 2 2 3 3 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6
4-50
PartsName
PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB PickupfeeddriverPCB
JNo.
J213 J213 J213 J213 J213 J213 J213 J213 J214 J214 J214 J215 J215 J216 J216 J216 J216 J217 J217 J217 J217 J217 J217 J218 J218 J218 J218 J218
Symbol
UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2 UN2
IntermediateConnector
J5086 J5086 J5086 J6056 J6057
KeyNo.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 29 30 31 32 33 34
JNo.
J6082 J6083 J6072 J6157 J6158 J6066 J6067 J5004 J6060 J6123 J6097 J6155 J6156 J6103 J6102 J6104 J6101 J5059 J6093 J6064 J6095 J6096 J6094 J6071 J6069 J6068 J6061 J6059
Symbol
CL1 M18 SL4 M19 M20 FM1 FM2 PS20 M28 FM10 PS29 M16 M17 PS31 PS32 PS30 PS37 UN51 SL1 PS33 PS18 UN53 FM8 FM6 FM5 FM7 M27
PartsName
Multi-purposepickupclutch Multi-purposemotor Bypasstrayliftersolenoid Registrationmotor Duplexfeedmotor Fixingheatexhaustfan1 Fixingheatexhaustfan2 Rightdoorsensor Lasershuttermotor Processcartridgefan(front) Lasershuttersensor Cassette1pickupmotor Cassette2pickupmotor ShutterHPsensor Shutterpositionsensor Fixingpressuresensor Innerdeliverysensor Transparencysensor Registrationshuttersolenoid Registrationsensor Frontdoorsensor Verticalpathsensor Secondarytransferexhaustfan Fixingcoolingfan(rear) Fixingcoolingfan(front) Deliveryfan1 Shuttermotor
T-4-21
J5036 J5036 J5036 J5038 J5055 J5055 J5055 J5055 J5055 J5055 J5034 J5034 J5034 J5034 J5034
J5060 J5060
4-50
4-51
16 19 25 23 24 22 21 20 7 6 15
13
17
14
10 4 5
11
12
F-4-29
4-51
4
KeyNo.
1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3
4-52
PartsName
CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB CassettefeeddriverPCB
JNo.
J234 J234 J234 J234 J235 J235 J235 J235 J235 J235 J235 J235 J235 J235 J237 J237 J237 J237 J237 J237 J237 J237
Symbol
UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3 UN3
IntermediateConnector
J5073 J5073 J5074 J5074 J5040 J5040 J5040 J5040 J5040 J5040 J5040 J5040 J5040 J5040 J5011 J5011 J5011 J5011 J5011 J5011 J5011 J5011
KeyNo.
4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 25
JNo.
J6127 J6128 J6125 J6126 J6138 J6137 J6136 J6135 J6134 J6133 J6132 J6131 J6130 J6129 J5067 J6032 J6031 J6030 J6029 J6028 J6027 J6026
Symbol
SW9 SW8 SW7 SW6 SL3 PS56 PS54 PS53 PS50 SL2 PS55 PS52 PS51 PS49 PS23 PS22 PS28 PS27 PS26 PS25 PS24
PartsName
Cassette2sizeswitchB Cassette2sizeswitchA Cassette1sizeswitchB Cassette1sizeswitchA Cassette2pickupsolenoid Cassette2pre-registrationsensor Cassette2paperlevelsensorB Cassette2paperlevelsensorA Cassette2papersensor Cassette1pickupsolenoid Cassette1pre-registrationsensor Cassette1paperlevelsensorB Cassette1paperlevelsensorA Cassette1papersensor Primarytransferdetachmentsensor2 Primarytransferdetachmentsensor1 ITBdisplacementsensor4 ITBdisplacementsensor3 ITBdisplacementsensor2 ITBdisplacementsensor1 ITBsteeringsensor
T-4-22
J5065 J5065 J5065 J5065 J5065 J5064 J5064 J5064 J5064 J5064 J5052 J5052 J5052 J5052 J5052 J5052 J5052 J5052
4-52
4-53
43 44 45 42 41 40 39 14 34 15 36 35 16 33 37
38
27 28
26 25 24 23 22 21 8 7 9 1 3 6 5 4 2 17 18
30
31
10
32
11
29 12 13
19 20
F-4-30
4-53
4
KeyNo.
1 1 1 1 2 2 2 3 3 3 3 4 4 4 4 4 4 4 4 5 6 6 6 7 7 7 7 7 8 8 8 8 9 9 9 9
4-54
PartsName
DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB DrumdriverPCB
JNo.
J303 J303 J303 J303 J304 J304 J304 J305 J305 J305 J305 J306 J306 J306 J306 J306 J306 J306 J306 J307 J308 J308 J308 J309 J309 J309 J309 J309 J310 J310 J310 J310 J312 J312 J312 J312
Symbol
UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4 UN4
IntermediateConnector
KeyNo.
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
JNo.
J6008 J6007 J6006 J6005 J6004 J6003 J6025 J6011 J6012 J6013 J6015 J6024 J6023 J6022 J6021 J6020 J6019 J6018 J6017 J6010 J6009 J6014 J6016 J6053 J6052 J6050 J6048 J6046 J5017 J5020 J5023 J5035 J2 J5 J4 J3
Symbol
CL5 CL4 CL3 CL2 M15 M14 M13 M8 M7 M6 M5 UN31 UN32 UN33 UN34 UN35 UN36 UN37 UN38 M1 M4 M3 M2 PS13 PS14 PS15 PS16 PS17 UN39 UN40 UN41 UN42 M9 M12 M11 M10
PartsName
Tonersupplyclutch(Bk) Tonersupplyclutch(C) Tonersupplyclutch(M) Tonersupplyclutch(Y) Primarytransferseparationmotor ITBdisplacementcontrolmotor ITBmotor Developingmotor(Bk) Developingmotor(C) Developingmotor(M) Developingmotor(Y) Ydrumrotationsensor1 Ydrumrotationsensor2 Mdrumrotationsensor1 Mdrumrotationsensor2 Cdrumrotationsensor1 Cdrumrotationsensor2 Bkdrumrotationsensor1 Bkdrumrotationsensor2 Drummotor(Y) Drummotor(Bk) Drummotor(C) Drummotor(M) Tonercontainerinnercoversensor(Y) Tonercontainerinnercoversensor(M) Tonercontainerinnercoversensor(C) Tonercontainerinnercoversensor(Bk) Tonercontaineroutercoversensor TonersensorrelayPCB(Y) TonersensorrelayPCB(M) TonersensorrelayPCB(C) TonersensorrelayPCB(Bk) Tonercontainermotor(Y) Tonercontainermotor(Bk) Tonercontainermotor(C) Tonercontainermotor(M
T-4-23
J5079 J5079 J5079 J5079 J5079 J5015 J5018 J5021 J5024 J1180 J1181 J1182 J1184
4-54
4-55
31
23 24
18
11 16
19 1 34 21 3 20 15 32
12
10
22 30 14 F-4-31
4-55
4
KeyNo.
1 2 34 3 5 6 7 7 8 8 8 9 10 10 10 11 11 12
4-56
PartsName
RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB RelayPCB
JNo.
J411 J412 J426 J413 J422 J423 J424 J424 J425 J425 J425 J427 J428 J428 J428 J432 J432 J451
Symbol
UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5 UN5
IntermediateConnector
KeyNo.
14 15 16 18 19 20 21 22 23 24 30 31 32
JNo.
J835 J834 J5101 J691 J129 J211 J301 J302 J650 J651 J652 J802 J804 J805 J803 J6122 J6124 J662
Symbol
UN11 UN10 UN9 UN1 UN2 UN4 UN4 UN16 UN17 UN18 FM3 FM4 UN8
PartsName
12VpowersupplyPCB 24VpowersupplyPCB2 ReadercontrollPCB All-nightpowerPCB DCcontrollerPCB PickupfeeddriverPCB DrumdriverPCB DrumdriverPCB HVT1PCB HVT2PCB HVT3PCB USBDevicePort-B1 InnerFinisher-A1 CassettefeedingUnit-AD1 BookletFinisher-C1/StapleFinisher-C1 Powersupplycoolingfan Processcartridgefan(rear) 24VpowersupplyPCB1
J5043
J5081 J5080
4-56
4-57
22 21
26 25
32
12
29 13 18 14 19 10 15 30
2 1
32
20 11 27 31
F-4-32
4-57
4
KeyNo.
1 2 2 3 4 4 5 6 7 32 8 9 10 10 11 12 13 14 15 15
4-58
PartsName
ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACinterlockswitch ACinterlockswitch ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACdriverPCB ACsubdriverPCB ACsubdriverPCB
JNo.
J1001 J1002 J1002 J1003 J1004 J1004 J1005 J1006 J1007 J1008 J1009 J1010 J1011 J1011 J1012 J2001 J2002 J2003 J1022 J1022
Symbol
UN6 UN6 UN6 UN6 UN6 UN6 UN6 SW5 SW5 UN6 UN6 UN6 UN6 UN6 UN6 UN6 UN6 UN6 UN6 UN6 UN7 UN7
IntermediateConnector
KeyNo.
18 19 20 21 22 32 25 26 27 29 30 31
JNo.
J866 J833 J1021 J1020 J681 J5013 J5014 J5005 J5102 J5088 J5039 J431 J5002 J2020 J1102 J1101
Symbol
SW5 UN7 UN7 UN9 H1 H1 TP1 SW1 H4 SW2 H3 H2 UN5 UN7 UN10 UN11
PartsName
ACincable GND GND ACinterlockswitch ACsubdriverPCB ACsubdriverPCB All-nightpowerPCB Fixingheater Fixingheater Temperaturefuse Mainpowersupplyswitch Cassetteheater CassetteFeedingUnit-AD1 Environmentswitch ReadercontrollPCB Drumheater(YMC) Drumheater(Bk) Cassetteheaterunit-31/32 RelayPCB ACsubdriverPCB 24VpowersupplyPCB2 12VpowersupplyPCB
T-4-24
J5012 J5012
J5007 J5007
J5038
J5077 J5077
4-58
4-59
14 12 10 9 2 5 8
13
11 4 7 6
F-4-33
4-59
4
KeyNo.
1 2 2 3 4 5 5 6
4-60
PartsName
LaserdriverPCB(M) LaserdriverPCB(M) LaserdriverPCB(M) LaserdriverPCB(M) LaserdriverPCB(Bk) LaserdriverPCB(Bk) LaserdriverPCB(Bk) LaserdriverPCB(Bk)
JNo.
J202 J204 J204 J205 J202 J204 J204 J205
Symbol
UN12 UN12 UN12 UN12 UN14 UN14 UN14 UN14
IntermediateConnector
KeyNo.
7 8 9 10 11 12 13 14
JNo.
J103 J6159 J6160 J6161 J103 J6166 J6165 J6167
Symbol
UN13 M32 M31 M29 UN15 M33 M34 M30
PartsName
LaserdriverPCB(Y) Imageskewcorrectionmotor(M Imageskewcorrectionmotor(Y) Scannermotor(YM) LaserdriverPCB(C) Imageskewcorrectionmotor(C) Imageskewcorrectionmotor(Bk) Scannermotor(CBk)
T-4-25
4-60
4-61
21 20 17 16
4 3 2 1 11 10 12 13
14
15
18
19
22
F-4-34
4-61
4
KeyNo.
1 1 2 2 3 3 4 4 5 6 6 7 8 9 9 10
4-62
PartsName
Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB Drumunitnew/olddetectionPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB ProcessunitrelayPCB
JNo.
J902 J902 J903 J903 J904 J904 J905 J905 J601 J602 J602 J603 J604 J605 J605 J606
Symbol
UN19 UN19 UN19 UN19 UN19 UN19 UN19 UN19 UN20 UN20 UN20 UN20 UN20 UN20 UN20 UN20
IntermediateConnector
J5093 J5094 J5095 J5096
KeyNo.
11 11 12 12 13 13 14 14 15 16 17 18 19 20 21 22
JNo.
J6114 J5093 J6116 J5094 J6118 J5095 J6120 J5096 J6115 J6147 J6148 J6117 J6119 J6149 J6150 J6121
Symbol
TS5 UN43 TS6 UN44 TS7 UN45 TS8 UN46 UN23 UN24 UN26 UN25 UN27 UN28 UN30 UN29
PartsName
ATRsensor(Y) DevelopingsubbiasPCB(Y) ATRsensor(M) DevelopingsubbiasPCB(M) ATRsensor(C) DevelopingsubbiasPCB(C) ATRsensor(Bk) DevelopingsubbiasPCB(Bk) Ypre-exposureLEDPCB(front) Ypre-exposureLEDPCB(rear) Mpre-exposureLEDPCB(rear) Mpre-exposureLEDPCB(front) Cpre-exposureLEDPCB(front) Cpre-exposureLEDPCB(rear) Bkpre-exposureLEDPCB(rear) Bkpre-exposureLEDPCB(front)
T-4-26
4-62
4-63
18 14 10 6 5 9 13 17
4 2 1 8 7 3 16 12 11 15
20 19
F-4-35
4-63
4
KeyNo.
1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4
4-64
PartsName
TonersensorrelayPCB(Y) TonersensorrelayPCB(Y) TonersensorrelayPCB(Y) TonersensorrelayPCB(Y) TonersensorrelayPCB(M) TonersensorrelayPCB(M) TonersensorrelayPCB(M) TonersensorrelayPCB(M) TonersensorrelayPCB(C) TonersensorrelayPCB(C) TonersensorrelayPCB(C) TonersensorrelayPCB(C) TonersensorrelayPCB(Bk) TonersensorrelayPCB(Bk) TonersensorrelayPCB(Bk) TonersensorrelayPCB(Bk)
JNo.
J658 J658 J658 J658 J659 J659 J659 J659 J660 J660 J660 J660 J661 J661 J661 J661
Symbol
UN39 UN39 UN39 UN39 UN40 UN40 UN40 UN40 UN41 UN41 UN41 UN41 UN42 UN42 UN42 UN42
IntermediateConnector
KeyNo.
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
JNo.
J6154 J6035 J6034 J6033 J6151 J6038 J6037 J6036 J6152 J6041 J6040 J6039 J6153 J6044 J6043 J6042
Symbol
PS5 PS9 PS1 TS1 PS6 PS10 PS2 TS2 PS7 PS11 PS3 TS3 PS8 PS12 PS4 TS4
PartsName
TonercontainercamHPsensor(Y) Tonercappositionsensor(Y) Tonersupplysensor(Y) Piezosensor(Y) TonercontainercamHPsensor(M) Tonercappositionsensor(M) Tonersupplysensor(M) Piezosensor(M) TonercontainercamHPsensor(C) Tonercappositionsensor(C) Tonersupplysensor(C) Piezosensor(C) TonercontainercamHPsensor(Bk) Tonercappositionsensor(Bk) Tonersupplysensor(Bk) Piezosensor(Bk)
T-4-27
4-64
4-65
4 8 11 41 6 7 5 10 17 42 13 12 1
40
14
15
34
30
33
29
39 38 21 26 19 27 25 46
43
16
45
44
37
18 31 36 50 35 32 49 23 28 48 47 20 22 24
F-4-36
4-65
4
KeyNo.
1 2 3 4 4 5 6 7 8 9 10 11 12 12 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 26 27 28 29 30 31 32 33 34 35 36
4-66
PartsName
MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB1 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 MaincontrollerPCB2 RiserPCB RiserPCB RiserPCB RiserPCB RiserPCB RiserPCB RiserPCB RiserPCB
JNo.
J1020 J1004 J1000 J1002 J1002 J1018 J1015 J1017 J1003 J1019 J1021 J1007 J1027 J1027 J1027 J1026 J1006 J1013 J1025 J1022 J11 J12 J13 J14 J16 J17 J18 J1000 J1010 J1010 J3003 JJ1xxx J102 J104 J105 J107 J108 J109 J110 J111
Symbol
-
IntermediateConnector
KeyNo.
37 38 39 -
JNo.
J103 J101 J6174 -
Symbol
FM13 UN1 FM11 FM12 FM14 -
PartsName
FlashPCB DDR2-SDRAM(M1) DDR2-SDRAM(M0) VoiceOperation(OptionA) VoiceGuidance(OptionB) USB(D) Controllerfan3 Ethernet Operationpart RiserPCB USB(H) DevicePortHub(Option) CardReaderIFkitCardReader(OptionA) RSConv(USAonly)(OptionB) CC-VII/Fcable(TBD)(Option) USB-FLASH(nouse) POSTPONEI/F(dealeronly) YON-RISER(PCI-Bridge)(option) TPM DDR2-SDRAM(M1) DDR2-SDRAM(M0) DDR2DIMM(P) RiserPCB G3FAXBOX(Option) G3FAXBOX(Option) FRAMCounter ImagedataanalyzerPCB BypassPCB EFIcontroller(option) ReadercontrollPCB DebugSRAM(debugonly) DCcontrollerPCB HDD HDD Controllerfan1 Controllerfan2 HDDcoolingfan SATA-Op
T-4-28
4-66
4-67
5 8 1
10
12
13
9 2 7 14 4 6
F-4-37
4-67
4
KeyNo.
1 2 2 3 4 5 6 7
4-68
PartsName
CPUPCB CPUPCB CPUPCB CPUPCB CPUPCB CPUPCB CPUPCB SubkeyPCB
JNo.
J1002 J1003 J1003 J1006 J1007 J1008 J1009 J4002
Symbol
-
IntermediateConnector
KeyNo.
8 9 10 11 12 13 14
JNo.
J4001 J9001 J2002 J1 J3002 J3001 J5001
Symbol
-
PartsName
RelayPCB SubkeyPCB InverterPCB HubPCB LCD TenkeyPCB TenkeyPCB VolumePCB
T-4-29
4-68
4
MainController
4-69
3)RemovethesignalcableandthepowercablefromtheHDD.
RemovingtheHDD
Howtoremove
1)OpentheRightRearCover1.
x2
Signal cable
Power cable
F-4-40
4)
InsertthesignalcableandthepowercableintotheholeoftheControllerBox.
F-4-38
2)OpentheHDDLid.
1screw
F-4-41
F-4-39
4-69
4
5)RemovetheHDDUnit.
4-70
7)RemovetheHDD.
2screws
x2
x4
HDD fixing plate
Spacers
F-4-42
6)Removetheplate.
Vibration-prevention dumpers
F-4-44
2screws
Caution:
x2
Atinstallation,installthegroundingplateinsidethe[A]partofHDDFixingPlate.
F-4-43
4-70
4-71
2)RemovetheUSBcableandthecontrolpanelcommunicationcable.
Control panel communication cable USB cable
RemovingtheMainControllerPCB1
BeforeremovingtheMainControllerPCB1
RemovetheRightRearCover 1screw(RStight;M4) 2screws(TP;M3) 1claw
x3
x2
F-4-48
3)Removethe2screwsandliftthegrip.
x2
Claw
F-4-46
Howtoremove
1)IftheReaderisinstalled,removetheReaderPowerCable.
Grips
F-4-49
4)HoldthegripandremovetheMainControllerPCB1.
Main controller PCB 1
x2 x2
Cable guide
Wire saddles
Connectors
F-4-47
MEMO: IfoptionPCBisinstalled,removeit.
F-4-50
4-71
4
Caution:
4-72
RemovingtheMainControllerPCB2
BeforeRemovingtheMainControllerPCB2
RemovetheLeftRearCoverandtheLeftRearSubCover.
1)RemovetheLeftRearCover.
x2
Atinstallation,liftthegrip,inserttheMainControllerPCB1untilitstops,thentiltthe gripandinstallitwith2screws.
x2
Grips
F-4-51
Claws
x5
Rubber cap
x2 x2
F-4-53
2)IftheReaderUnitisinstalled,removethereadersignalcable.
1connector
Cable guide
Wire saddles
Connectors
F-4-52
MEMO: Make sure that the Main Controller PCB 1 is fixed to the device.
F-4-54
4-72
4
1screw 1hook
4-73
MEMO: WhentheoptionPCBisinstalled,removeit.
3)RemovetheLeftRearSubCover.
Hook
x2
Howtoremove
F-4-55
Grip
MEMO: Make sure that the Main Controller PCB 2 is fixed to the device.
F-4-56
2)HoldthegripandremovetheMainControllerPCB2.
2screws
x2
Grip
F-4-57
4-73
4-74
x2 x2
Wire saddles Reader power cable
OpeningtheControllerBox
BeforeopeningtheControllerBox
RemovetheRightRearCover RemovetheLeftRearCover RemovetheLeftRearSubCover RemovetheRearCover
Cable guide
Connectors
F-4-59
x2
Rear cover
Howtoopen
1)WhentheReaderisinstalled,removethereaderpowercable.
F-4-58
4-74
4
2screws
4-75
Cable
2-1)AvoidtheharnessandopentheControllerBox.
x2
F-4-60
2-2)WhentheFAXUnitisinstalled,avoidtheharnessandopentheControllerBoxandthe FAXUnit.
F-4-62
3screws
x3
3) Close the Controller Box while pressing the cable with afinger. Check that the cable is F-4-61 storedwhencloseingthebox.
4-75
4-76
3)RemovetheRearLowerCover.
RemovingtheMainPowerUnit
BeforeremovingtheMainPowerUnit
RemovetheRightRearCover RemovetheLeftRearCover RemovetheLeftRearSubCover RemovetheRearCover RemovetheRearLowerCover
x2 x2
Claw Claw
1)RemovetheConnectorCover.
1screw
Hook
Hook
F-4-63
2)WhentheCassettePedestalisinstalled,removetheconnector.
6harnessguides 5connectors
Connectors
F-4-65
x6 x5
Harness guides
F-4-64
4-76
4
Howtoremove
1)OpentheDrumDriverUnit.
4-77
3)PullouttheMainPowerUnit.
1screw
3connectors 3screws
Connectors
x3
x3
Screw Screw
F-4-66
Screw
Screw
F-4-68
2)RemovetheFINLatticeConnectorUnit.
4)RemovetheMainPowerUnit.
15connectors 5wiresaddles
Connectors
x2
x15 x5
12 Connectors
x2
Screws
Wire saddles
F-4-67
4-77
4-78
RemovingtheACDriver
BeforeremovingtheACDriver
RemovetheRightRearCover RemovetheLeftRearCover RemovetheLeftRearSubCover RemovetheRearCover RemovetheRearLowerCover
RemovingtheControlPanel
Howtoremove
1)PullouttheControlPanelandremovethemold.
Control panel
Mold
Howtoremove
1)RemovealltheconnectoronthePCBandremovetheACDriver.
2)Removethestopper.
F-4-71
x6 x13 x3
2screws
x2
13 Connectors Screw
F-4-70
Stopper
F-4-72
4-78
4-79
LaserExposureSystem
CleaningtheDust-blockingGlass
BeforeCleaningtheDust-blockingGlass
OpentheFrontCover.
RemovingtheDust-blockingGlassCleaningPad
BeforeRemovingtheDust-blockingGlassCleaningPad
OpentheFrontCover.
Howtoremove
1)RemovetheGlassCleaningTool.
F-4-76
HowtoClean
1)TakeouttheDust-blockingCleaningToolandcleantheDust-blockingGlassfromthe4 holesoftheWasteTonerContainer.
F-4-78
2)RemovetheDust-blockingGlassCleaningPad.
F-4-79
F-4-77
4-79
4-80
RemovetheITBUnit
1)CheckthatthearrowofITBSubPressureReleaseLeverisalignedwiththetrianglemark. (Ifitisnotaligned,adjustthearrowoflevertothetrianglemark.)
RemovingtheLaserScannerUnit
BeforeRemovingtheLaserScannerUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover.
Triangle mark
Triangle mark
F-4-80
F-4-82
RemovetheITBCover.
2screws(loosen)
2)TurntheITBPressureReleaseLeverintherightdirectionuntiltheprotrusionofgripis alignedwiththetrianglemarkontheplatetoreleasethepressure.
4-80
4
3)Removethe2connectors.
4-81
5) Hold the ITB Unit as show in the below figure, and remove in the direction of the arrow
x2
F-4-87 F-4-84
F-4-85
ITB unit
4) Pull out the ITB Unit up to the stop label position flatly.
F-4-88
2screws
x2 Stop label position
F-4-86
4-81
4-82
3)PlacethepaperontotheProcessUnittoprotecttheDrumUnitfromthelight.
Paper
RemovingtheProcessUnit
Caution: Wheninstalling/removingtheProcessUnit,donotremovetheWasteTonerContainer. 1) Remove the 4 stepped screws fixed on the right and left rails.
x4
F-4-91
4)Takethe2railsofProcessUnitbacktothehostmachine.
F-4-89
2) Hold the front and rear of Process Unit and remove it flatly.
F-4-92
Howtoremove
Caution:
F-4-90
4-82
4
Caution:
4-83
2)RemovetheImageFormationSuctionDuct.
IfswitchingtheLaserScannerUnit1and2,imagedisplacementoccurs.Thus,notethe serial number affixed on the respective unit before removing it, and match the number whenreinstallingit
1screw 1claw
Screw
1)RemovetheDrumHeater.
1screw
Drum heater
F-4-94
WhenremovingtheLaserScannerUnit1(Y/Mlaser),
T-4-30
3)RemovetheLeftUpperCover.
Screw
F-4-93
x5 x3
x5
Claws
Claws
Rubber caps
F-4-95
4-83
4
4)RemovetheLeftDuctUnit.
4-84
Caution: SincetheLaserScannerUnitneedsadjustment,donotdisassembleit.
2screws
x2
Hole
5)RemovetheScannerFixingSpring.
1screw
Protrusion Boss
Caution: Atinstallation,passtheharnessthroughtheSheetGuideandinstallit.
Fixing spring Screw
F-4-97
6)RemovetheLaserScannerUnit.
4connectors
Connectors Laser scanner unit Connectors
x2
x2
F-4-98
4-84
4-85
ImageFormationSystem
RemovingtheTonerFilter
Howtoremove
1)RemovetheTonerFilterCover.
RemovingtheITBUnit
BeforeRemovingtheITBUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover
1claw
Claw
RemovetheITBCover. 2screws(loosen)
F-4-99
F-4-101
2)RemovetheFanProtectionPlateandtheTonerFilter.
F-4-102
Caution: DonottouchtheITBsurface.
F-4-100
4-85
4
Howtoremove
4-86
3)Removethe2connectors.
1)CheckthatthearrowofITBSubPressureReleaseLeverisalignedwiththetrianglemark. (Ifitisnotaligned,adjustthearrowoflevertothetrianglemark.)
x2
Triangle mark Triangle mark
F-4-105
F-4-103
2)TurntheITBPressureReleaseLeverinthearrowdirectionuntiltheprotrusionofgripis alignedwiththetrianglemarkontheplatetoreleasethepressure.
4) Pull out the ITB Unit up to the stop label position flatly.
2screws
x2 Stop label position
F-4-106
4-86
4-87
5) Hold the ITB Unit as show in the below figure, and remove in the direction of the arrow
CleaningthePatchSensor
Beforecleaningthepatchsensor
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit
HowtoClean
1)Whilepushingtheshutter,cleanthesurfaceofPatchSensorwithacottonswabmoistened withwaterandtightlywrungbywipingitinonedirection.Aftercleaning,makesurethat
F-4-107
Caution: Donotdry-wipeitsincethesensorwindowischargedandattractsthetoner.
Patch sensor
ITB unit
6)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 7)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
4-87
4-88
2)RemovethePre-secondaryTransferGuide.BesurenottoputtoomuchforceonthePresecondaryTransferGuidewhenremovingit.
RemovethePatchSensor(front,center,rear)
Beforecleaningthepatchsensor
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheProcessUnit
2screws
Grounding Cable
Howtoremove
1)ReleasethehookandremovetheShutterofthesensor.
2Claws
Shutter
F-4-110
3)Removethemold.
Claw
4screws 4bosses
Boss
Hook
F-4-109
F-4-111
4-88
4
movingfreely.
4-89
4)RemovetheWireSaddle,Reuseband,andEdgeSaddletomaketheSensorAssembly
RemovingtheITBCleaningUnit
BeforeremovingtheITBCleaningUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit
Howtoremove
Caution: Whenremoving/installingit,donotcontacttheITBCleaningUnittotheITB.
Reuse Band
1)
2Screws 1Connector
Removethesensordesiredtobereplaced.(PatchSensor(Rear)asanexample) F-4-112
1)HoldtheleftandrightgripandremovetheITBCleaningUnitinthedirectionofthearrow.
2screws
x2
Connector
F-4-113
4-89
4-90
2)PlacetheremovedITBCleaningUnitonthepaper.
RemovingtheITBCleaningBladeUnit
BeforeremovingtheITBCleaningBladeUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit
Howtoremove
1)RemovetheITBCleaningBladeUnitandputitonthepaper.
F-4-115
1screw
3)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 4)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
F-4-116
4-90
4
Caution:
4-91
Caution: AfterinstallingtheITBCleaningBladeUnittotheITBCleaningUnit,makesuretolift theprotectionsheetwithascrewdriveretc.Atthattime,donotfoldtheprotectionsheet.
WheninstallingtheITBCleaningBladeUnit,makesurethatEqualizeBlockisinstalled.
Caution: DonottouchtheITBCleaningBlade.
Caution:
F-4-117
4-91
4-92
3)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 4)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
RemovingtheITB
BeforeremovingtheITB
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit Caution: DonottoughthesurfaceofITB.(Ifneeded,holdtheITBwithin10mmfrombothedge ofthebelt.)
Howtoremove
1)TurnovertheITBUnit. 2)RemovethePushSlider.
1stopring
F-4-118
3)PulltheITBPressureReleaseLevertothefront.
4-92
4
4)Removetheharness.
4-93
6)LifttheITBandstanditontheITBCover. Caution:
3wiresaddles 1edgesaddle
Makesurethatitisremovedfromthefrontandrearhooks. MakesuretoaligntheclawoftheITBCoverwiththecut-offofprotectionsheet.
x4
2claws
x2
F-4-119
5)Removetherearpin.
Hooks
1screw
F-4-120
MEMO: PlacetheITBcoverupsidedownontheplacewheretheITBUnitwillbestood.
4-93
4
7)Pulloutthefrontpin.
4-94
9)HoldtheITBwithin10mmfromtheedgeandremoveitupward.
MEMO: Tolockthepressure,pulloutthepinwhileholdingtheITBUnitwithhand.
1screw
10mm
10mm
F-4-124
8)BendtheSecondaryTransferInnerRollerUnitby90degreeandreinstallitwiththepin removedinstep7).
10)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 11)ExecutetheITBEquilibriumPositionDetectionServiceMode
F-4-123
(COPIER>FUNCTION>MISC-P>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2 to3minutes.
4-94
4-95
1)Pulloutthepin,maketheSecondaryTransferInnerRollerUnitstraightandinstallthe removedpin.
RemovingthePrimaryTransferRoller(Bk)
BeforeremovingthePrimaryTransferRoller(Bk)
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit
Howtoremove
Caution: DonottouchthesurfaceofDriveRoller,SecondaryTransferInnerRollerandPrimary TransferRollerasitmaycausetheimagefailure.
F-4-125
2)RemovetheITBUnitfromtheITBCoverandplaceitontothepaperinthepositionwhere therollerisplacedupside.
2claws
ITB unit
x2
Claws
ITB cover
Paper
F-4-126
4-95
4
EngagementArm.
4-96
Caution:
3)Whileholdingthefrontbushing,pinchtheclawandremovetheDisengagement/
Stopper
Bushing
F-4-127
Paper
4)RemovethePrimaryTransferRoller(Bk).
1bushing 1spring
Primary transfer roller (Bk)
Caution: Hold the stopper with finger lightly after installation to check that the claw is surely installed.
Bushing Spring
F-4-128
MEMO: ThereisnoparticulardirectionforthePrimaryTransferRollerinstallation.
5)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 6)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
4-96
4-97
1)Pulloutthepin,maketheSecondaryTransferInnerRollerUnitstraightandinstallthe removedpin.
RemovingthePrimaryTransferRoller(C,M,Y)
BeforeremovingthePrimaryTransferRoller(C,M,Y)
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit
Howtoremove
MEMO: ThisproceduredescribesthestepsforPrimaryTransferRoller(C).Gothroughthe sameprocedureforMandY. 2)RemovetheITBUnitfromtheITBCoverandplaceitontothepaper.
F-4-129
2claws
Caution: DonottouchthesurfaceofDriveRoller,SecondaryTransferInnerRollerandPrimary TransferRollerasitmaycausetheimagefailure.
ITB unit
x2
Claws
ITB cover
Paper
F-4-130
3)TurntheITBSubPressureReleaseLevertomakethePrimaryTransferRoller(C,M,Y) lifted.
Primary transfer roller(C) Primary transfer roller(M) Primary transferr oller(Y)
F-4-131
4-97
4
4) EngagementArm.
4-98
MEMO: ThereisnoparticulardirectionforthePrimaryTransferRollerinstallation.
Whileholdingthefrontbushing,pinchtheclawandremovetheDisengagement/
Caution:
Boss Bushing
F-4-132
5)Whileholdingthebushing,removethestopperfromtheboss.
Boss Stopper
Paper
Caution:
Bushing
F-4-133
6)RemovethePrimaryTransferRoller(C).
1bushing 1spring
Bushing Spring
F-4-134
7)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate.
4-98
4-99
8)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
RemovingtheSecondaryTransferInnerRoller
BeforeremovingtheSecondaryTransferInnerRoller
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit
Howtoremove
Caution: DonottouchthesurfaceofDriveRoller,SecondaryTransferInnerRollerandPrimary TransferRollerasitmaycausetheimagefailure.
F-4-135
4-99
4
removedpin.
4-100
3)RemovetheGroundingPlateandtheSecondaryTransferBearingHolder.
1)Pulloutthepin,maketheSecondaryTransferInnerRollerUnitstraightandinstallthe
1screw
Grounding plate
F-4-136
2)RemovetheITBUnitfromtheITBCoverandplaceitontothepaperinthepositionwhere therollersidefacesup.
4)RemovetheSecondaryTransferInnerRoller.
2claws
ITB unit
x2
Claws
F-4-139 F-4-137
ITB cover
Paper
4-100
4
Caution:
4-101
ReinstallingtheITB
BeforereinstallingtheITB
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover RemovetheITBUnit RemovetheITBCleaningUnit
BecarefuloftheinstallationdirectionwheninstallingtheSecondaryTransferInner Roller.
Howtoreinstall
1)CheckthattheITBSubPressureReleaseLeverisinthebelowposition.
5)ToexecutetheITBEquilibriumPositionDetection,makethemainbodyinstandbystate. 6)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
2)StandtheITBUnitontheITBCover.
2claws
F-4-140
x2
4-101
4-102
Caution: MakesuretoinstallitbyhookingtheITBDisplacementSensorLeverontotheITB edge.
3) Bend the Secondary Transfer Inner Roller Unit by 90 degree and fix it with the pin.
F-4-142
4)HoldtheITBwithin10mmfromtheedgeandinstallitbyaligningitwiththemarkingline.
5)Pulloutthepin,maketheSecondaryTransferInnerRollerUnitstraightandinstallthe
10mm
removedpin.
1screw
10mm
Marking line
F-4-143
F-4-144
4-102
4
2claws x2
4-103
8)PushtheITBPressureReleaseLeverandinstalltheBushSlidertotheboss.
6)RemovetheITBUnitfromtheITBCoverandinstallittotheplate.
1stopring
F-4-145
7)Installtherearpin.
1screw
Caution:
F-4-147
MakesurethatthereisnogapbetweentheITBPressureReleaseLeverandthePlate.
space
F-4-146
9)Installtheharness.
1edgesaddle 3wiresaddles
4-103
4
Caution:
4-104
RemovingtheRecycleTonerBottle
BeforeremovingtheRecycleTonerBottle
OpentheFrontCover
Howtoremove
1)ReleasetheRecycleTonerBottleLockLever.
2)RemovetheRecycleTonerBottle.
F-4-149
(BecauseitmaycausemisdetectionontheFullDetectionSensor.)
4-104
4-105
2)TurntheITBPressureReleaseLeverintherightdirectionandreleasethepressure. Caution: WhenreleasingthepressureofITBPressureReleaseLever,makesurethatthe protrusionofgripisalignedwiththetrianglemarkofplate.
PullingOuttheProcessUnit
BeforepullingouttheProcessUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover
Howtoremove
1)MakesurethatthearrowofITBSubPressureReleaseLeverisalignedwiththetriangle markoftheplate. (Ifitisnotaligned,alignthearrowofleverwiththetrianglemarkofplate.)
Triangle mark
Triangle mark
ITB pressure release lever
F-4-151
3)PullouttheProcessUnituntilitstops.
ITB sub pressure release lever ITB sub pressure release lever
2screws
x2
F-4-150
F-4-152
4-105
4-106
4)PlacethepaperontotheProcessUnittoprotecttheDrumUnitfromthelight.
Paper
RemovingtheProcessUnit
BeforeremovingtheProcessUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover PullouttheProcessUnit
Howtoremove
Caution:
F-4-153
Wheninstalling/removingtheProcessUnit,donotremovetheRecycleTonerBottle.
1) Remove the 4 stepped screws fixed on the right and left rails.
x4
F-4-154
2) Hold the front and rear of Process Unit and remove it flatly.
F-4-155
4-106
4-107
3)PlacethepaperontotheProcessUnittoprotecttheDrumUnitfromthelight.
Paper
ReinstallingtheProcessUnit
BeforereinstallingtheProcessUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover PullouttheProcessUnit RemovetheProcessUnit
Howtoreinstall
1)Pulloutthe2railsofProcessUnitfromthehostmachine.
F-4-156
4)Takethe2railsofProcessUnitbacktothehostmachine.
F-4-158
2)Alignthe4protrusionsofProcessUnitwiththepositioningpinofrailandinstallit.
F-4-157
Positioning pins
Positioning pins
F-4-159
4-107
4-108
4) Slowly take the Process Unit back to the host machine and fix it with 2 screws.
3)InstalltherightandleftrailsandtheProcessUnitwith4steppedscrews.
x4
x2
F-4-160
F-4-161
[A]
[A]
4-108
4-109
RemovingtheDrumUnit
BeforeremovingtheDrumUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover PullouttheProcessUnit
Howtoremove
Caution:
F-4-162
6)
InstalltheITBCoverandtightenthe2loosenedscrews.
Grips
F-4-163
F-4-164
4-109
4
Caution:
4-110
ReinstallingtheDrumUnit
BeforereinstallingtheDrumUnit
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover PullouttheProcessUnit RemovetheDrumUnit
WhenremovingtheDrumUnit,donotpullitoutfromonehandle.
Howtoreinstall
Caution: Donottouchthedrumsurface. 1)Holdthegripandinstallitfromthetopvertically.
Grips
F-4-165
4-110
4
Caution:
4-111
MEMO: WheninstallingtheDrumUnit(Bk)tothehostmachine,performthefollowing procedures. 2-1) PlacethehalffoldpaperincludedinthepackagingboxontheDeveloping Assembly(Bk).BesuretosettheedgeofhalffoldpaperovertheTonerCollecting SheetoftheDevelopingAssembly.
Wheninstallingitatanangle,theshuttermaybedamaged.Thus,makesuretoinstallit fromdirectlyabove.
2)AligntheguideofProcessUnitwiththeguideofDrumUnitandinstalltheDrumUnit.
Guide of drum unit Guide of process unit Guide of drum unit Guide of process unit
F-4-166
Caution: Sincetherailmaybebroken,makesurethattheshutterissurelyslidontherail.
Shutter
Shutter
Rail
Rail
4-111
4
2-2)
4-112
Whilethepaperisset,installtheDrumUnit(Bk)tothehostmachine.
Drum Unit (BK)
RemovingtheDevelopingAssembly
BeforeremovingtheDevelopingAssembly
OpentheFrontCover,RightLowerCoverandRightUpperCover RemovetheITBCover PullouttheProcessUnit RemovetheDrumUnit RemovetheRecycleTonerBottle
Howtoremove
MEMO: ThisproceduredescribestheremovalofBkDevelopingAssembly.Gothroughthe sameprocedureforremovingtheY,M,CDevelopingAssembly.
2-3)
Holdthefoldedportionandpullthispaperouttothedirectionofarrow
Caution: Wheninstalling/removingit,donottouchtheDevelopingSleeve.
3) Hold the grip part (8 places) with finger lightly and make sure that the Drum Unit is securely installed.
x2
F-4-167
F-4-168
4-112
4
2)Removethesteppedscrew.
4-113
Caution: Makesuretoinsertthe2pinsofstopperintothe2holesofDevelopingAssemblyand installit.
F-4-169
3)Whilepullingoutthestopper,removetheDevelopingAssemblyupward.
F-4-170
MEMO: InitializationofDevelopingAssembly(tonerratioandpatch)isnecessaryanditdiffers dependingonthecolor. If4colorsarereplacedsimultaneously,executeINISET-4. COPIER>FUNCTION>INSTALL>INISET-YInitializationofYDevelopingAssembly (tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-MInitializationofMDevelopingAssembly (tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-CInitializationofCDevelopingAssembly (tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-KInitializationofBkDevelopingAssembly (tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-4Initializationof4-colorsDeveloping Assembly(tonerratioandpatch)
4-113
4-114
Caution: WhenremovingtheSealontheDevelopingAssembly,besuretoliftitslowlyand vertically.Ifliftingitinanobliquedirection,theSealontheDevelopingAssemblyis stressed,andmaycausetearoftheseal
InstallinganewDevelopingAssembly
BeforeinstallinganewDevelopingAssembly
OpeningtheFrontCover RemovingtheITBCover PullingouttheProcessUnit RemovingtheDrumUnit RemovingtheWasteTonerContainer
Howtoinstall
1)InstalltheDevelopingAssemblytotheProcessUnitinthereverseprocedureofRemoving theDevelopingAssembly. 2)WhileholdingtheDevelopingAssemblywithonehand,pulloutthedevelopingsealstraight upwithotherhand. Performthisprocedureforeachcolor.
F-4-171
4-114
4
Caution:
4-115
RemovingtheSecondaryTransferOuterRollerand SecondaryTransferSeparationGuideUnit
BeforeremovingtheSecondaryTransferOuterRollerand SecondaryTransferSeparationGuideUnit
OpentheRightLowerCoverandRightUpperCover
Rear side
Seal
Howtoremove
Seal
Caution: DonottouchthesurfaceofSecondaryTransferOuterRoller.
Front side
3)
ByfollowinginstallingtheDrumUnit,installtheeachcolorDrumUnit.
4)BesuretoholdtheuppersideofeachDevelopingAssemblywhenremovingtheseal. Otherwisethecoverwillbeofffromitsposition.
1)PlacethepapertoputtheSecondaryTransferOuterRollerUnit. 2)Removetherearstopper.
1claw
F-4-172 F-4-173
4-115
4
RollerUnit.
4-116
5)RemovetheSecondaryTransferOuterRoller.
3)PinchtheclawsonbothsidesofbearingholderandremovetheSecondaryTransferOuter
4claws
2bearingholders 2bearings
x4
Bearing
Bearing holder
F-4-174
F-4-176
4)RemovetheSecondaryTransferSeparationGuideUnit.
1bushing 2springs
Spring
Spring
Bushing
4-116
4-117
2)Fittheprotrusionwiththegrooveoftheguideandinstallthebushing. 3)Installthespringontobothsideofprotrusion.
Spring
ReinstallingtheSecondaryTransferOuterRollerand SecondaryTransferSeparationGuideUnit
BeforereinstallingtheSecondaryTransferOuterRollerand SecondaryTransferSeparationGuideUnit
OpentheRightLowerCoverandRightUpperCover RemovetheSecondaryTransferOuterRollerandSecondaryTransferSeparationGuide
Unit
Howtoremove
Caution: DonottouchthesurfaceofSecondaryTransferOuterRoller. 1)FitthesidewithlongershafttotheholeofSecondaryTransferSeparationGuideUnitand installtheSecondaryTransferOuterRoller.
Protrusion
F-4-178
Shorter shaft
Longer shaft
Hole
F-4-177
4-117
4
Caution:
4-118
RemovingtheTonerBottlemanually
BeforeRemovingtheTonerBottlemanually
RemovetheRightRearCover 1screw(RStight;M4) 2screws(TP;M3) 1claw
x3
MakesurethatthespringontheDuplexUnitsideisnotskewed.
4)FitthespringontheDuplexUnittotheprotrusiononthebearingholderofSecondary TransferOuterRollerUnitandinstallitoneafterother.
Claw
RemovetheLeftRearCover,LeftRearSubCover.
1)RemovetheLeftRearCover.
F-4-180
5)Reinstalltherearstopper.
x2
F-4-179
Claws
x5
Rubber cap
F-4-181
4-118
4
1connector
4-119
RemovetheRearCover 3rubbercaps 3screws 1claw
2)IftheReaderUnitisinstalled,removethereadersignalcable.
x2
3)RemovetheLeftRearSubCover.
Rear cover
F-4-184
1)WhentheReaderisinstalled,removethereaderpowercable.
x2
Left rear sub cover
F-4-183
x2
Wire saddles
Cable guide
Connectors
F-4-185
4-119
4
2screws
4-120 Howtoremove
MEMO: ThisproceduredescribestheprocedureofTonerBottle(Bk).Gothroughthesame procedureforTonerBottle(C,M,Y).
2-1)AvoidtheharnessandopentheControllerBox.
x2
1)OpentheTonerReplacementCover. 2)Removethehandle.
1screw
Screw
F-4-186
2-2)WhentheFAXUnitisinstalled,avoidtheharnessandopentheControllerBoxand theFAXUnit.
3screws
x3
F-4-188
3)Installthehandletotheshaft. 4)Turnthehandlelikeratchetandopenthesmallcover.
F-4-187
F-4-189
4-120
4
5)Pulloutthetonercontainer.
4-121
RemovingtheMainDriveUnit
BeforeRemovingtheMainDriveUnit
RemovetheRightRearCover RemovetheLeftRearCover RemovetheLeftRearSubCover. RemovetheRearCover OpentheControllerBox RemovetheRearLowerCover
1)RemovetheConnectorCover. Caution:
F-4-190
1screw
Atinstallation,makesuretoinserttheTonerContainerallthewayinandclosethe smallcover.
F-4-191
2)WhentheCassettePedestalisinstalled,removetheconnector.
5connectors 6harnessguides
Connectors
x6 x5
Harness guides
F-4-192
4-121
4
2rubbercaps 2screws 2claws 2hooks
4-122 Howtoremove
1)RemovetheLeftUpperCover.
3)RemovetheRearLowerCover.
5rubbercaps 5screws
Left upper cover
x2 x2
Claw Claw
x5
Hook
Rubber caps
Hook
F-4-194
2)WhentheFAXUnitisinstalled,opentheControllerBoxandtheFAXUnitwhileavoiding theharness.
3screws
x3
Harness
F-4-193
F-4-195
4-122
4
3)OpentheHigh-voltagePCB.
4-123
5)RemovetheHarnessGuideCover.
2screws
HVT PCB
2screws
Harness guide cover
x2
x2
4)RemovetheDrumDriverPCB.
F-4-196
guide.
F-4-198
PullouttheharnessofLaserScannerandmakeaspacebyhookingtheclawofharness
3screws
1edgesaddle 1claw
x3
Harness
F-4-197
F-4-199
4-123
4
6)RemovetheFanDuct1.
4-124
8)RemovealltheredconnectorsfromtheDrumDriverPCB.
10connectors 10wiresaddles
Wire saddles Wire saddles Connectors Wire saddles Connectors Wire saddle Wire saddles Connector Fan duct Connectors Drum driver PCB Connectors
F-4-202
Claw
x10 x10
x2
F-4-200
7)RemovetheharnessofHopper.
9)RemovetheMainDriveUnit.
8connectors
Connectors
2connectors 6screws
Connectors
x8
x2 x6
Connectors
F-4-203
4-124
4-125
2)RemovetheSmallPlate.
RemovingtheTonerContainerFrontInnerCover
BeforeremovetheTonerContainerFrontInnerCover
ReleasethelockofTonerContainer(Byservicemode)
MEMO: ToreleasethelockofTonerContainermanually,refertothestep1)to4)inRemoving theTonerContainermanually.Atthattime,donotpulloutthetonercontainer. 1)OpentheTonerReplacementCover. 2)ExecutetheservicemodeandreleasethelockofTonerContainer. 3)TurnOFFthepowerbeforeclosingtheSmallCoverandtheTonerReplacementCover. 4)Closethe4SmallCoversandtheTonerReplacementCover.(Sameinmanualoperation)
1screw(Ptight)
3)RemovetheFrontUpperCover.
F-4-205
RemovetheITBUnit. RemovetheProcessUnit.
1screw(Ptight) 1screw(RS)
Howtoremove
1)RemovetheFrontRightCover.
x2
F-4-206
Loosen
F-4-204
4-125
4-126
7)RemovetheTonerContainerFrontInnerCover.
4)RemovetheFrontUpperRightCover.
x4
Connector
F-4-207
5)RemovetheDeliveryTray.
Wire saddle
F-4-210
6)Openthe4SmallCoversandremovethe4TonerContainers.
F-4-208
F-4-209
4-126
4-127
Caution: Ifitisplacedsideways,tonermayscatterinsidetheHopperanditmaycausethe operationfailure.Thus,standandputtheHopperUnitonthepaper.
RemovingtheHopper(M)
BeforeremovetheHopper(M)
ReleasethelockofTonerContainer(Byservicemode) RemovetheITBUnit. RemovetheProcessUnit. RemovetheTonerContainerFrontInnerCover
Howtoremove
1)RemovetheTonerTray.
1screw(M4binding)
Paper
F-4-213
F-4-211
2)Whileavoidingtheductsheet,removetheHopperUnit.
x3
Hopper Unit
x2
Connector [B]
[A]
F-4-214
4-127
4
Caution:
4-128
RemovingtheHopper(Y)
BeforeremovetheHopper(Y)
ReleasethelockofTonerContainer(Byservicemode) RemovetheITBUnit. RemovetheProcessUnit. RemovetheTonerContainerFrontInnerCover
WheninstallingtheTonerTray,aligntheRodLeverwiththeTonerCoverOpen/Close RodLeverandinstallit.
Toner cover Open/Close rod lever Rod lever
Howtoremove
1)RemovetheTonerTray.
1screw(M4binding)
F-4-215
Caution: WheninstallingtheremovedTonerContainer,besurenottoshakeit.
Caution: WhentheMainDriveUnitisremovedsimultaneously,makesuretoinstalltheMain Drive Unit first and then, the Hopper Unit in order. Otherwise, toner supply failure may occur. 2)RemovetheLeftCover. Caution: WhenreplacingtheDevelopingAssembly,makesuretoinitializebeforeinstallingthe TonerContainer COPIER>FUNCTION>INSTALL>INISET-M IfinstalltheTonerContainerbeforeinitialization,T/Dratiocannotsettherightvalue.
F-4-216
x5
x5
Crow
Crows
F-4-217
4-128
4
3)RemovetheLeftMiddleStay.
4-129
Caution: Ifitisplacedsideways,tonermayscatterinsidetheHopperanditmaycausethe operationfailure.Thus,standandputtheHopperUnitonthepaper.
2screws
x2
4)Whileavoidingtheductsheet,removetheHopperUnit.
F-4-218
Paper
F-4-220
x3
x2
Duct sheet
F-4-219
[A] [B]
F-4-221
4-129
4
Caution:
4-130
RemovingtheHopper(C)
BeforeremovetheHopper(C)
ReleasethelockofTonerContainer(Byservicemode) RemovetheITBUnit. RemovetheProcessUnit. RemovetheTonerContainerFrontInnerCover
WheninstallingtheTonerTray,aligntheRodLeverwiththeTonerCoverOpen/Close RodLeverandinstallit.
Toner cover Open/Close rod lever Rod lever
Howtoremove
1)RemovetheReverseTray. 2)RemovetheInsideRearCover1&2.
3caps 3screws(RS)
F-4-222
Caution: WheninstallingtheremovedTonerContainer,besurenottoshakeit.
x3
Caution: WhentheMainDriveUnitisremovedsimultaneously,makesuretoinstalltheMain Drive Unit first and then, the Hopper Unit in order. Otherwise, toner supply failure may occur. Caution: WhenreplacingtheDevelopingAssembly,makesuretoinitializebeforeinstallingthe TonerContainer COPIER>FUNCTION>INSTALL>INISET-Y IfinstalltheTonerContainerbeforeinitialization,T/Dratiocannotsettherightvalue. 3)RemovetheHarnessGuide.
2screws(RS)
x2
F-4-224
4-130
4
3screws(RS)
4-131
7)RemovetheTonerTray.
4)RemovetheHopperUpperStay.
1screw(M4binding)
x3
5)RemovetheSecondaryDeliveryDuct.
F-4-225
8)WhileavoidingtheDuctSheet,removetheHopperUnit.
F-4-228
2screws(Ptight)
x2
x3
x2
Duct sheet
6)RemovetherailRetainingPlate.
F-4-226
F-4-229
4screws(M4binding)
x4
F-4-227
4-131
4
Caution:
4-132
Caution: WheninstallingtheTonerTray,aligntheRodLeverwiththeTonerCoverOpen/Close RodLeverandinstallit.
Toner cover Open/Close rod lever Rod lever
IftheHopperUnitisplacedsideways,tonermayscatterinsidetheHopperanditmay causetheoperationfailure.Thus,standandputtheHopperUnitonthepaper.
F-4-232
Paper
F-4-230
Caution: WheninstallingtheremovedTonerContainer,besurenottoshakeit.
Caution: WheninstallingtheHopper,alignthecut-off[A]partofBottleFixingRingwiththeBottle FixingArm[B]andinstallittothehostmachine. Caution: WhentheMainDriveUnitisremovedsimultaneously,makesuretoinstalltheMain Drive Unit first and then, the Hopper Unit in order. Otherwise, toner supply failure may occur.
[A] [B]
F-4-231
COPIER>FUNCTION>INSTALL>INISET-C IfinstalltheTonerContainerbeforeinitialization,T/Dratiocannotsettherightvalue.
4-132
4-133
2screws(binding)
RemovingtheHopper(Bk)
BeforeremovetheHopper(Bk)
ReleasethelockofTonerContainer(Byservicemode) RemovetheITBUnit. RemovetheProcessUnit. RemovetheDrumHeater(Bk) RemovetheTonerContainerFrontInnerCover RemovetheHopper(C)
x2
Howtoremove
1)RemovetheHarnessfromtheFixingGuide.
Harness
F-4-235
4)RemovetheHopperUnit.
Guide
x4
x2
x3
Fixed guide
F-4-236
2)RemovealltheTonerTrays.
F-4-233
3screws(M4binding)
x3
3)RemovetheDuctSheet.
F-4-234
4-133
4
Caution:
4-134
Caution: WheninstallingtheTonerTray,aligntheRodLeverwiththeTonerCoverOpen/Close RodLeverandinstallit.
Toner cover Open/Close rod lever Rod lever
IftheHopperUnitisplacedsideways,tonermayscatterinsidetheHopperanditmay causetheoperationfailure.Thus,standandputtheHopperUnitonthepaper.
F-4-238
Paper
Caution: WheninstallingtheremovedTonerContainer,besurenottoshakeit. Caution: WheninstallingtheHopper,alignthecut-off[A]partofBottleFixingRingwiththeBottle FixingArm[B]andinstallittothehostmachine. Caution: WhentheMainDriveUnitisremovedsimultaneously,makesuretoinstalltheMain Drive Unit first and then, the Hopper Unit in order. Otherwise, toner supply failure may occur.
COPIER>FUNCTION>INSTALL>INISET-K IfinstalltheTonerContainerbeforeinitialization,T/Dratiocannotsettherightvalue.
4-134
4
FixingSystem
4-135
2)PinchandpulloutthetabofFixingAssembly.
RemovingtheFixingAssembly
BeforeremovingtheFixingAssembly
OpentheRightLowerCoverandRightUpperCover
Tabs
F-4-241
3)HoldthegripandremovetheFixingAssembly.
F-4-239
HowtoRemove
1)OpentheFixingRailandloosenthe4screws.
Caution:
F-4-242
BesuretoinserttheFixingAssemblyuntilitstopsatthetimeofinstallation. IncaseofthefaultyinstallationoftheFixingAssembly,eitherE009ornoisemayoccur.
Fixing Rail Fixing Rail
F-4-240
Ifso,removetheFixingAssembly,andinstallitagain.
4-135
4-136
3)RemovetheShutterUnit.
RemovingtheFilmUnit
BeforeremovingtheFilmUnit
OpentheRightLowerCoverandRightUpperCover RemovetheFixingUnit
4screws
x4
HowtoRemove
MEMO: Wheninstalling/removingit,donottouchtheFilmUnitandPressureRoller.
F-4-244
4)TurnthepressuregearwithhandandmakethePressureRollerengagedcondition.
Pressure roller engaged condition
Drawer connector
3connectors 6harnessguides
Connectors Harness
x3 x8
Harness guides
F-4-245
Harness guides
F-4-243
4-136
4
2screws
4-137
7)RemovetheharnessfromtheharnessguideandremovetheFilmUnit.
5)OpentheleftandrightPressureLevers.
x2
F-4-248
8)RemovetheSeparationGuidefromtheFilmUnit.
F-4-246
6)RemovetheleftandrightFixingPlatesandtheTerminalPlate.
2leafsprings
3screws
x3
4-137
4-138
CleaningtheFixingSeparationGuide
BeforeCleaningtheFixingSeparationGuide
OpentheRightLowerCoverandRightUpperCover RemovetheFixingUnit RemovetheFilmUnit
CleaningtheShutterCover
BeforeCleaningtheShutterCover
OpentheRightLowerCoverandRightUpperCover RemovetheFixingUnit RemovetheFilmUnit
HowtoClean
1)CleantheFixingSeparationGuidewithlint-freepapermoistenedwithalcohol.
HowtoClean
1)CleantheShutterCoverwithlint-freepapermoistenedwithalcohol.
F-4-250
F-4-251
4-138
4-139
Caution: At installation, install it after fitting the 3 hooks to the notches.
RemovingthePressureRollerandPressureRoller Bearing
BeforeremovingthePressureRollerandPressureRoller Bearing
OpentheRightLowerCoverandRightUpperCover RemovetheFixingUnit RemovetheFilmUnit
HowtoRemove
MEMO: Wheninstalling/removingit,donottouchthePressureRoller. 1)RemovetheFixingInletGuide.
F-4-253
Pressure roller
F-4-254
4-139
4-140
Caution: WhenkeepingtheFixingAssemblyforlongperiods,turnthepressuregearandmake thePressureRollerdisengagedcondition.
Pressure roller disengaged condition
3)LifttherightsideandremovethePressureRollerUnit.
4)RemovethePressureRollerandthe2PressureRollerBearingsfromthePressureRoller Unit.
F-4-257
Gear E-ring
F-4-256
4-140
4-141
PickupFeedSystem
CleaningtheSecondaryTransferGuide
BeforecleaningtheSecondaryTransferGuide
OpentheRightLowerCoverandRightUpperCover
CleaningtheFeedContactPointGuide
BeforecleaningtheFeedContactPointGuide
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)CleantheFeedContactPointGuidewithlint-freepapermoistenedwithalcohol.
F-4-258
HowtoClean
1)CleantheTransferGuidewiththelint-freepapermoistenedwithalcohol.
Secondary transfer guide
F-4-260
F-4-259
4-141
4-142
CleaningtheRegistrationRoller
BeforecleaningtheRegistrationRoller
OpentheRightLowerCoverandRightUpperCover
CleaningthePre-registrationGuideAssembly
BeforecleaningthePre-registrationGuideAssembly
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)CleantheFeedContactPointGuidewithlint-freepapermoistenedwithalcohol.
HowtoClean
1)CleantheinsideofPre-registrationGuideAssemblywithlint-freepapermoistenedwith alcohol.
Secondary Transfer Guide
Pre-registration Guide Assembly
Registration roller
F-4-261
F-4-263
2)CleantheoutsideofPre-registrationGuideAssemblywithlint-freepapermoistenedwith
Registration roller
F-4-262 F-4-264
4-142
4-143
CleaningtheTransparencySensor
BeforecleaningtheTransparencySensor
OpentheRightLowerCoverandRightUpperCover
CleaningtheVerticalPathSensorandtheLightproof Sheet
BeforecleaningtheVerticalPathSensorandtheLightproof
HowtoClean
1)CleantheTransparencySensorwithlint-freepapermoistenedwithwaterinonedirection.
Sheet
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)CleantheVerticalPathSensorwithdrylint-freepaper.
Transparency sensor
F-4-265
2)CleanthePrismwithlint-freepaper.
2)CleantheLightproofSheetwithdrylint-freepaper.
F-4-267
Prism
F-4-266
Lightproof Sheet
F-4-268
4-143
4-144
CleaningtheFixingDeliveryGuideAssembly
BeforecleaningtheFixingDeliveryGuideAssembly
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)OpentheFixingDeliveryGuide. 2)CleantheinsideofFixingDeliveryGuideAssemblywithlint-freepapermoistenedwith alcohol.
HowtoClean
1)OpentheFixingDeliveryGuide. 2) Clean the Post-fixing Roller 1 with lint-free paper moistened with alcohol while rotating it.
Post-fixing roller
alcohol.
F-4-269
3) Clean the Post-fixing Roller 2 with lint-free paper moistened with alcohol while rotating it.
3)CleantheoutsideofFixingDeliveryGuideAssemblywithlint-freepapermoistenedwith
Post-fixing roller
F-4-272
F-4-270
4-144
4-145
CleaningtheFixingDeliveryRoller
BeforecleaningtheFixingDeliveryRoller
OpentheRightLowerCoverandRightUpperCover
CleaningtheDuplexFeedUpperRoller,Wheel
BeforecleaningtheDuplexFeedUpperRoller,Wheel
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)OpentheFixingDeliveryGuide. 2)CleantheFixingDeliveryRoller1withlint-freepapermoistenedwithalcoholwhilerotating thegear.
HowtoClean
1)OpentheRightLowerCover. 2)CleantheDuplexFeedUpperRoller,Wheelwithlint-freepapermoistenedwithalcohol whilerotatingit.
it.
F-4-273
F-4-275
3)CleantheFixingDeliveryRoller2withlint-freepapermoistenedwithalcoholwhilerotating
F-4-274
4-145
4-146
CleaningtheDuplexFeedLowerRoller,Wheel
BeforecleaningtheDuplexFeedLowerRoller,Wheel
OpentheRightLowerCoverandRightUpperCover
CleaningtheFirst,SecondandThirdDeliveryRoller
BeforecleaningtheFirst,SecondandThirdDeliveryRoller
OpentheRightLowerCoverandRightUpperCover
HowtoClean
1)OpentheRightLowerCover. 2)CleantheDuplexFeedLowerRoller,Wheelwithlint-freepapermoistenedwithalcohol whilerotatingit.
HowtoClean
1)CleantheFirst,SecondandThirdDeliveryRollerswithlint-freepapermoistenedwith alcohol.
Second and Third delivery roller Duplex feed lower rollers
F-4-279 F-4-277
F-4-280
4-146
4-147
RemovingtheSecondandThirdDeliveryUnit
BeforeremovingtheSecondandThirdDeliveryUnit
OpentheRightLowerCoverandRightUpperCover
Howtoremove
1)RemovetheFrontRightCover.
F-4-281
Loosen
2)RemovetheReverseTrailEdgeGuideandtheInnerDeliveryCover.
F-4-284
1screw 2hooks
x2
F-4-283
4-147
4-148
Caution:
Wire saddles
3)Removethe2connectorsand3wiresaddles.
x3 x2
AfterinstallingtheSecondandThirdDeliveryUnit,makesurethattheSensorFlagin1 placeworksnormally.
Sensor flag
Connectors Second delivery sensor
F-4-286
4)RemovetheSecondandThirdDeliveryUnit.
4screws
F-4-288
x4
F-4-287
4-148
4-149
4)RemovetheFirstDeliveryUnit.
RemovingtheFirstDeliveryUnit
BeforeremovingtheFirstDeliveryUnit
OpentheRightLowerCoverandRightUpperCover RemovetheSecondandThirdDeliveryUnit
2screws 1steppedscrew
x3
Howtoremove
1)RemovetheRightUpperCoverLatch.
2screws
2)RemovetheRightLowerCoverLatch.
2screws
Right upper cover latch
Caution:
F-4-291
x4
Atinstallation,aligntheFirstDeliverySensorandtheSensorFlagandinstallit.
Sensor flag
3)OpentheFixingAssemblyandremovetheFixingGearCover.
F-4-289
1screw
Fixing gear cover
Fixing assembly
F-4-290
4-149
4
Caution:
4-150
RemovingtheDuplexUnit
BeforeremovingtheDuplexUnit
OpentheRightLowerCoverandRightUpperCover
Sensor flag First delivery sensor
AfterinstallingtheFirstDeliveryUnit,makesurethatthe2SensorFlagsworknormally.
Howtoremove
First delivery sensor
1)RemovetheFrontCoverofRightUnit.
1screw 1claw
F-4-293
Claw
F-4-294
4-150
4
2connectors 1screw 1wiresaddle
4-151
Caution: WhenremovingtheDuplexUnit,notethattheRightDoorRotationHingeandthespring areeasilydisassembled.
2)Removetheconnectorandthegroundingwire.
Connectors
x
Right door rotation hinge Spring
Wire saddle
Grounding wire
F-4-295
3)HoldthesidesofDuplexUnitandremoveit.
F-4-297
F-4-296
4-151
4-152
3)Tilttheshaft,pulltheMulti-purposeTrayPickupRollerandremoveit.
RemovingtheMulti-purposeTrayPickupRoller
BeforeremovingtheMulti-purposeTrayPickupRoller
OpentheRightLowerCoverandRightUpperCover RemovetheDuplexUnit
Howtoremove
1)RemovetheBothAngleGuide.
Shaft
2screws
x2
Caution:
F-4-300
At installation, be sure to fit the Split Pin into the Multi-purpose Tray Pickup Roller.
Multi-purpose tray pickup roller
Split pin
F-4-298
2)Removethegear,2stopringsandthebushing.
F-4-301
Bushing
F-4-299
4-152
4-153
2)RemovetheMulti-purposeTraySeparationRoller.
RemovingtheMulti-purposeTraySeparationRoller
BeforeremovingtheMulti-purposeTraySeparationRoller
OpentheRightLowerCoverandRightUpperCover RemovetheDuplexUnit RemovingtheMulti-purposeTrayPickupRoller
1claw
Howtoremove
1)RemovetheFrontFeedGuideandMiddleFeedGuide.
2screws 3claws
MEMO: LifttheFrontandMiddleFeedGuides,pushthemintotherear,andpullthemout towardfront.
Claw
F-4-303
x2
Claws
Protrusion Limiter
x3
Front feed guide
Claws
F-4-302
4-153
4-154
RemovingthePickupRoller
BeforeremovingthePickupRoller
RemovetheCassette
MEMO: Thisproceduredescribesthestepofcassette1.Gothroughthesameprocedurefor cassette3and4iftheCassettePedestalisinstalled.
x3
Pushthereleasebuttonandremovethecassette.
Claws
Caution:Pointstonoteatinstallation OpentheMulti-purposeTraySubCoverandmakesurethatthebearingpartofMultipurposeTrayPickupSensorFlagissurelyinstalled.
Bearing part Bearing part
F-4-304
Howtoremove
MEMO: Thisproceduredescribestheremovingstepofcassette1PickupRoller.Gothroughthe sameprocedureforthePickupRollerofcassette2.
Sensor flag
Caution: DonottouchthesurfaceofPickupRollerandtheSeparationRoller.
4-154
4
2)RemovethePickupRoller.
4-155
1)Removethecassette1andcassette2.
RemovingtheFeedRoller
BeforeremovingtheFeedRoller
RemovetheCassette
1pin 1tab
Howtoremove
MEMO: Thisproceduredescribestheremovingstepsofcassette1FeedRoller.Gothroughthe sameprocedurefortheFeedRollerofcassette2.
Caution: DonottouchthesurfaceofPickupRollerandtheSeparationRoller.
F-4-305
1)Removethecassette1andcassette2. 2)RemovetheCassetteFeedRoller.
1tab
F-4-306
4-155
4-156
RemovingtheSeparationRoller
BeforeremovingtheSeparationRoller
RemovetheCassette
RemovingthePickupAssemblyIdlerGear
BeforeremovingthePickupAssemblyIdlerGear
RemovetheCassette RemovethePickupRoller RemovetheFeedRoller
Howtoremove
MEMO: Thisproceduredescribestheremovingprocedureofcassette1SeparationRoller.Go throughthesameprocedurefortheSeparationRollerofcassette2.
Howtoremove
MEMO: Thisproceduredescribestheremovingprocedureofcassette1PickupAssemblyIdler Gear.GothroughthesameprocedureforthePickupAssemblyIdlerGearofcassette2.
Caution: DonottouchthesurfaceofPickupRollerandtheSeparationRoller.
1tab
1tab
F-4-307
F-4-308
4-156
4-157
4)OpentheRightUpperCoverandtheRightLowerCover.
RemovingtheCassette1PickupUnit
BeforeremovingtheCassette1PickupUnit
RemovetheCassette RemovetheRightLowerCover
1)Pulloutthecassette1andcassette2. 2-1)WhentheCassettePedestalisinstalled,removetheRightFrontCover3.
1screw
F-4-311
5)RemovetheRightRearCover3.
3claws 1hook
Claw Right front cover 3
theRightFrontCover3.
x4
Right rear cover 3
F-4-309
2-2)WhentheCassettePedestalisnotinstalled,removetheRightLowerSubCover1and
1screw
Right front cover 3 Right lower sub cover 1 Claw
Claws
6)Removethe2screwsandtheconnector.
F-4-312
Claw 3
3)OpentheCassetteRightUpperCoverandtheCassetteRightLowerCover.
F-4-310
Connector
F-4-313
4-157
4-158 Howtoremove
1)LifttheleverandremovetheRightFrontInnerCover.
7)Removethefrontstopringandseparatethearm.
Arm
Stop ring
Stop ring
2screws
x2
Arm
D
8)RemovethewirefromthehostmachineandremovetheRightLowerCover.
F-4-314
Lever
F-4-316
2)RemovetheRightLowerSubCover2andremovetheRightRearInnerCover.
2screws
Right rear inner cover Right lower cover x2
x2
F-4-315
F-4-317
4-158
4
3)RemovethePickupHarness.
4-159
RemovingtheCassette2PickupUnit
BeforeremovingtheCassette2PickupUnit
RemovetheCassette RemovetheRightLowerCover
x2 x2
Wire saddle
Howtoremove
1)Pulloutthecassette2. 2)RemovetheRightLowerSubCover2andremovetheRightRearInnerCover.
2screws
Right rear inner cover
Edge saddle
x2
4)HoldthePickupGuideandremovetheCassette1PickupUnit.
F-4-318
4screws(RS;M4) 1screw(RS;M3)
Pickup guide
x2
Right lower sub cover 2 Claws
x5
3)RemovethePickupHarness.
F-4-320
x2 x2
Wire saddle Edge saddle
F-4-321
4-159
4
4screws
4-160
4)RemovetheCassette2PickupUnit.
RemovingtheCassetteSizeDetectionUnit
BeforeremovetheCassetteSizeDetectionUnit
RemovetheCassette
x4
Howtoremove
MEMO:
F-4-322
1)RemovetheCassette1SizeDetectionUnit.
x2
Connector Cassette size detection unit Wire saddle
F-4-323
4-160
4
Option
4-161
3)Removethecablefromthewiresaddle.
RemovingtheADFUnit
Howtoremove
MEMO: WhenremovingtheADFUnitandtheReaderUnitfromthehostmachine,removethe ADF Unit first and then, remove the Reader Unit because the accuracy of scanner systemsmaybedeteriorated. 1)OpentheADF.
Wire saddle
F-4-326
MEMO: ThereisnowiresaddleincaseofDuplexColorImageReaderUnit-B1.
3)Removetheinnerplate.
4screws
F-4-324
2)RemovetheReaderCableCover.
x4
2screws
x2
F-4-327
F-4-325
4-161
4
4)Removethecable.
4-162
Caution: IncaseofColorImageReaderUnit-B1/B2,recordthepositionofscaleofADFmounting screw.
1edgesaddle 2connectors
x2
F-4-330 F-4-328
5-1)IncaseofColorImageReaderUnit-B1/B2,removethe2screws.
MEMO: Afterremovingthecable,closetheedgesaddle.
x2
MEMO: Remove the flat cable in case of Duplex Color Image Reader Unit-B1.
1reuseband 1edgesaddle 1harnessretainer 3connectors
x3 x3
F-4-331
F-4-329
4-162
4-163
Caution: BecarefulnottodamagetheReaderCommunicationCableGuidewhen placingit.
5-2)IncaseofDuplexColorImageReaderUnit-B1,removethe4screws.
x4
F-4-332
Caution: BesurenottogetscratchesontheWhiteSheetontheremovedADF.
F-4-334
MEMO: Atinstallation,installitintherecordedscalepositionofADFmountingscrew.
F-4-333
4-163
4
HeightAdjustment
1.Checktheheight.
1)ClosetheDADF.
4-164
Protrusion
Sheet
Reading position
Paper
Protrusion
Sheet
Reading pos
4-164
4
Protrusion Sheet
4-165
Paper Protrusion Sheet Reading position
Reading position
2)ClosetheDADF. 3)Pulloutthepaperinthedirectionofthearrowandcheckthatthereisresistance.
F-4-339
4-165
4-166 RightAngleAdjustment
MEMO: Thereare2adjustmentmethods;forfrontsidereading(readersidescannerunit)and forbacksidereading(DADFsidescannerunit). a.Adjustmentforfrontsidereading 1)SetatestcharttoDADFandmakea1-sidedprint. 2)ChecktherightangleaccuracyofangleAontheprintedpaper.Ifitisnotrightangle,make anadjustment.
Image on test chart Fixing screw Printed image
Adjustmentprocedure
1) Rotate the fixing screw on top of the left hinge to adjust it. Toremovethespaceonthefront:rotateitclockwise(blackarrowdirection) Toremovethespaceontherearorbothsides:rotateitcounterclockwise(whitearrow direction)
Blanking cover
F-4-340
2)Checktheheightagainandmakesurethattheheightisappropriate.
Feed direction
F-4-341
4-166
4-167
b.Adjustmentforbacksidereading 1)SetatestcharttoDADFupsidedownandmakea2-sidedprint. 2)ChecktherightangleaccuracyofangleAontheprintedpaper.Ifitisnotrightangle,make anadjustment.
Image on test chart Rubber cover Printed image
Guide
Knurled screw
F-4-342
5) After adjustment, tighten the fixing nut and 2 knurled screws. 6)PrintoutatestchartagainandcheckthatangleAisrightangle.
F-4-34
4-167
4-168
6)Afteradjustment,tightenthescrew. 7)Printoutatestchartagainandcheckthatitisrightangle.
RemovingtheReaderUnit
Howtoremove
MEMO: WhenremovingtheADFUnitandtheReaderUnitfromthehostmachine,makesure to remove the ADF Unit first and then, remove the Reader Unit since the accuracy of scannersystemsmaybedeteriorated. 1)RemovetheReaderLeftCover.
x2 x2
Claws
Rubber caps
screw(binding;M4x8)
x2
F-4-346
4-168
4
2claws 2screws(binding;M4x8) 2rubbercaps
4-169
6)RemovethescrewofReaderFrontCover.
3)RemovetheReaderRightCover.
2screws 1 screw (flat-head; M4x6) (for Duplex Color Image Reader Unit-B1 only)
flat-head : M4x6 Claws
x2 x2
x3
Rubber caps
F-4-347
7)RemovetheReaderFrontCover.
F-4-349
4)MovetheControlPanelinthedirectionofthearrow. 5)MovetheControlPanelBaseCoverinthedirectionofthearrow.
3bosses
1screw
8)RemovethefrontsideofReaderUnitwithastubbyscrewdriver.
F-4-350
2screws(TP;M4x8)
Plate
F-4-348
x2
x2
F-4-351
4-169
4
2connectors 2wiresaddles 1cableguide
4-170
12)RemovetheFixingHookCandtheReaderFixingHookA.
9)Removethereaderpowercable.
2screws(binding;M4x8)
Protrusion Protrusion
x2 x2
Cable guide Wire saddles Reader power cable Fixing hook C Protrusion Reader fixing hook A
F-4-354
13)Removetheconnectorofreadercommunicationcable. 14)Removethereadercommunicationcablefromthecut-offofthehostmachineplate.
Connectors
10)OpentheRightUpperCoverandtheRightLowerCover.
F-4-352
Right lower cover
F-4-355
15)Removethe2ReaderFixingHooksB.
11)ClosetheRightLowerCover.
x2
F-4-356
4-170
Adjustment
MainController
5
MainController
HDD
Before Replacing
5-2
Whenusing theCard Readerand imageWARE Accounting Manager 1)GotoCOPIER>FUNCTION>INSTALL>CARDandenterthenumericalvalue oftheleadingcardwhichisusedforDepartmentID. Then,pressOKbutton.(e.g.:IfNo.1toNo.1000cardsareusedfor DepartmentID,enter1oftheleadingcard.) 2)AfterturningOFFandONthemainpowerswitch,performthefollowing operationsfromSettings/Registrationmode. InManagementSettings>UserManagement>DepartmentIDManagement> PageTotals,besurethatID00000001toID00001000arecreated. Setthefollowing:Preferences>Network>TCP/IPSettings>IPv4Settings>IP AddressSettings>IPAddress,GatewayAddress,SubnetMask InManagementSettings>UserManagement>SystemManagerInformation Settings>SystemManagerIDandSystemPIN,registeranynumberforthem. Then,turnOFFandONthemainpowerswitch. IfSystemManagerIDandSystemPINarenotregistered,cardregistration todevicecannotbeexecutedfortheimageWAREAccountingManagersetting operation. 3)DownloadthecardIDfromimageWAREAccountingManagertotheMainBody again. 4)Afterdownloadingiscompleted,gotoManagementSettings>User Management>DepartmentIDManagement>PageTotals.Besurethatonly thedownloadedcardIDisdisplayed. 5)PrintusingtheusercardregisteredfromimageWAREAccountingManager. BesurethatthecardinformationusedforthetargetdevicesofimageWARE AccountingManageriscollected. PointstoNotewhenUsingtheSystemSoftware-installedHDDWhenusingthe HDDwhichwasinstalledthesystemsoftwareoftheothermachine(differentserial number),besuretoformattheHDDaftertheinstallation. IftheHDDisnotformatted,theoperationcannotbeguaranteed. WhenusingtheHDDwhichwasinstalledthesystemsoftwareoftheother machine(differentserialnumber),besuretoformattheHDDaftertheinstallation. IftheHDDisnotformatted,theoperationcannotbeguaranteed.
1)Backupoftheset/registereddata UsetheRemoteUI. ManagementSettings>DataManagement>Import/Export Targetdata: AddressList ForwardingSettings Settings/Registration WebAccessFavorites PrinterSettings PaperInformation 2)Printingtheset/registereddata Usetheservicemode. (Lv.1)COPIER>FUNCTION>MISC-P>USER-PRT Listoftheset/registereddatawhichcannotbebackedupisprinted." AftterReplacing 1)HDDformat 1-1)Startwiththesafemode.(Whilepressing2and8keyssimultaneously, turnONthemainpowerswitch.) 1-2)UseSSTtoformatallpartitions. 2)Downloadingsystemsoftware 2-1)UseSSTtodownloadthesystemsoftware(System,LANG,RUIand others). 3) Initializing the key, certificate and CA certificate (Lv.2)COPIER>FUNCTION>CLEAR>CA-KEY 4)TurningOFFandONthemainpowerswitch 5)Restoringthebackupdata UsetheRemoteUI. ManagementSettings>DataManagement>Import/Export 6)Resetting/registeringthedata Whilereferringtothelistofset/registereddatawhichwasprintedbefore replacement,reset/registerthedata. 7) When the user generates and adds the encryption key, certificate and/or CA certificate, request the user to generate them again. 8)ExecutingAutoAdjustGradation(FullAdjust)Settings/Registrationmode: Adjustment/Maintenance>AdjustImageQuality>AutoAdjustGradation
T-5-1
MaincontrollerPCB1
Operationat Replacement TransferringthepartsfromoldPCBtonewPCB DDR2-SDRAM(2pc.) FlashPCB TPMPCB Resetting/registeringthedataisnotnecessaryafterMainControllerPCB1is replaced.
T-5-2
5-2
5
MaincontrollerPCB2
Before Replacing
5-3
DevelopingAssembly
Adjustment procedure InitializationofDevelopingAssembly(tonerratioandpatch)isnecessaryandit differsdependingonthecolor. If4colorsarereplacedsimultaneously,executeINISET-4. COPIER>FUNCTION>INSTALL>INISET-YInitializationofYDeveloping Assembly(tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-MInitializationofMDeveloping Assembly(tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-CInitializationofCDeveloping Assembly(tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-KInitializationofBkDeveloping Assembly(tonerratioandpatch) COPIER>FUNCTION>INSTALL>INISET-4Initializationof4-colorsDeveloping Assembly(tonerratioandpatch)
T-5-4
1)Backupoftheset/registereddata UsetheRemoteUI. ManagementSettings>DataManagement>Import/Export Targetdata: AddressList ForwardingSettings Settings/Registration WebAccessFavorites PrinterSettings PaperInformation 2)Printingtheset/registereddata Usetheservicemode. (Lv.1)COPIER>FUNCTION>MISC-P>USER-PRT Listoftheset/registereddatawhichcannotbebackedupisprinted Replacement TransferringthepartsfromoldPCBtonewPCB DDR2-SDRAM(2pc.) FlashPCB TPMPCB AftterReplacing 1)Afterinstallingtheparts,turnONthemainpowerswitch. 2)Restoringthebackupdata UsetheRemoteUI. ManagementSettings>DataManagement>Import/Export 3)Resetting/registeringthedata Whilereferringtothelistofset/registereddatawhichwasprintedoutbefore replacement,reset/registerthedata. 4) When the user generates and adds the encryption key, certificate and/or CA certificate, request the user to generate them again. Prohibited Donottransferthefollowingpartstoanothermodel(whichhasadifferentserial Operation number). Ifyoufailtodoso,theMainBodydoesnotactivatenormallyandthismightcause tofailtherestoration. MainControllerPCB1 MainControllerPCB2(withMemoryPCBinstalled) MemoryPCB
T-5-3
Patchsensor
Adjustment procedure InitializationofPatchsensorisnecessary COPIER>OPTION>IMG-MCON>P-ALPHAInputPatchSensoralphavalue
T-5-5
5-3
Troubleshooting
InitialCheck TestPrint Troubleshootingitems Upgrading procedure
6
InitialCheck
Initialcheckitemslist
Item
SiteEnvironment
6-2
No.
1 2 3 4 5 6 7 8 9 10 11 12
Detail
Thevoltageofthepowersupplyisasrated(10%). The site is not a high temperature / humidity environment (near a water faucet, water boiler, humidifi er), and it is not in a cold place. The machine is not near a source of fi re or dust. Thesiteisnotsubjecttoammoniumgas. Thesiteisnotexposedtodirectraysofthesun.(Otherwise,providecurtains.) The site is well ventilated, and the fl oor keeps the machine level. Themachine'spowerplugremainsconnectedtothepoweroutlet. Thepaperisofarecommendedtype. Thepaperisnotmoist.Trypaperfreshoutofpackage. Check the cassette and the manual feed tray to see if the paper is not in excess of a specifi c level. Ifatransparencyisused,checktomakesurethatitisplacedinthecorrectorientationinthemanualfeedtray. Checkthetableofdurablestoseeifanyhasreachedtheendofitslife. Checkthescheduledservicingtableandtheperiodicallyreplacedpartstable,andreplaceanypartthathasreachedthetimeofreplacement.
Check
T-6-1
6-2
6
TestPrint
Overview
6-3
TYPEPattern
Gradation
Fogging
Uneven Density
Right Angle
Originator
Normalcopy/print ---(ForR&D) 16gradations Fullhalf-tone Grid ---(ForR&D) MCYBkhorizontalstripes (subscanningdirection) 11 ---(ForR&D) 12 64-gradation 13 ---(ForR&D) 14 Fullcolor16-gradation 15to100 ---(ForR&D)
Yes
Yes Yes
Yes
Yes Yes
Yes
StepstoselectthetestprintTYPE
1)Setthenumberofprint,papersizeetc. 2)Select:COPIER>TEST>PG. 3)Select:COPIER>TEST>PG>TYPE. 4)EnterthedesiredTYPEnumberandpressOKkey. 5)Selectthecorrespondingcolor(setting1meansoutput)inCOLOR-Y/M/C/K. 6)SetthedensityinDENS-Y/M/C/K(thisisenabledforTYPE=5only). 7)Pressstartkey.
6-3
6
Howtousethetestprint
16gradations(TYPE=4)
6-4
Thistestprintisformainlycheckingthegradation,fogging,whitelineandunevendensityatfront&rear. Checkitem
Gradation Fogging Whiteline Unevendensityat front&rear
Checkmethod
Checkthat16densitygradationisproperlyreproduced. Checkthatfoggingoccursonwhiteimageareaonly. Checkthatwhitelinedoesnotappearonentireimage. Checkthatunevendensitydoesnotappearatfront&rear.
Assumedcause
FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDevelopingAssembly FailureofPhotosensitiveDrum(approx.94mm) FailureofDevelopingCylinder(approx.63mm)
T-6-3
F-6-1
Fullhalftone(TYPE=5)
Thistestprintisformainlycheckingtheblackline,whitelineandunevendensity. MEMO: 1.Select:servicemode>COPIER>TEST>PGandspecifydevelopingcolorCOLOR-Y/M/C/Ktooutputtheprintby developingcolor. 2.Tochangethedensityoftestprint,select:servicemode>TEST>PG>DENS-Y/M/C/Kandsetthedensity. Checkitem
Transferfailure
Checkmethod
Assumedcause
Unevenpitch Unevendensity
Checkthatthetransferfailuredoesnotappearonentireimage. FailureofITB(scratch,dirt) FailureofPrimaryTransferRoller(scratch,dirt) FailureofSecondaryTransferRoller(scratch,dirt) Checkthatblacklinedoesnotappearonentireimage. ScratchonPhotosensitiveDrum DirtonPrimaryChargingRoller Checkthatwhitelinedoesnotappearonentireimage. FailureofITBUnit FailureofSecondaryTransferOuterRoller Dirtonlaserlightpath Checkthatunevenpitchdoesnotappearonentireimage. FailureofPhotosensitiveDrum(approx.94mm) FailureofDevelopingCylinder(approx.94mm) Checkthatunevendensitydoesnotappearonentireimage. DirtonDustproofGlass DeteriorationofITB
T-6-4
6-4
6
Grid(TYPE=6)
6-5
Thistestprintisformainlycheckingthecolordisplacement,rightangleaccuracyandstraightlineaccuracy. Checkitems
Unevendensity
Checkmethod
Checkthatunevendensitydoesnotappearonsolidareaof eachcolor
Assumedcause
Blackline(colorline) Whiteline
FailureofLaserScannerUnit FailureofdeveloperinDevelopingAssembly FailureofPrimaryTransferRoller Checkthatblackline(colorline)doesnotappearonsolidarea ScratchonPhotosensitiveDrum ofeachcolor DirtonPrimaryChargingRoller FailureofITBUnit Checkthatwhitelinedoesnotappearonsolidareaofeach color FailureofSecondaryTransferOuterRoller DirtonLaserLightPath
T-6-5
F-6-3
MCYBkhorizontalstripe(TYPE=10)
4.0+1.5/-1.0mm
Thistestprintisformainlycheckingthedarkareadensityofeachcolor,eachcolorbalanceandwhitelineondevelopment. Checkitems
Unevendensity
Checkmethod
Checkthatunevendensitydoesnotappearonsolidareaof eachcolor
Assumedcause
Blackline(colorline) Whiteline
FailureofLaserScannerUnit FailureofdeveloperinDevelopingAssembly FailureofPrimaryTransferRoller Checkthatblackline(colorline)doesnotappearonsolidarea ScratchonPhotosensitiveDrum ofeachcolor DirtonPrimaryChargingRoller Checkthatwhitelinedoesnotappearonsolidareaofeach FailureofITBUnit color FailureofSecondaryTransferOuterRoller DirtonLaserLightPath
T-6-6
2.5 +1.5mm/-1.5mm
F-6-4
6-5
6
64-gradations(TYPE=12)
6-6
ThistestprintisformainlycheckingthegradationsofYMCBksinglecoloratonetime. Checkitem
Gradation Fogging Whiteline
Checkmethod
Checkthat64gradationsdensityisproperlyreproduced. Checkthatfoggingappearsonwhiteimageareaonly. Checkthatthereisnowhitelineonentireimage.
Assumedcause
FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDevelopingAssembly
T-6-7
F-6-5
Fullcolor16-gradations(TYPE=14)
Thistestprintisformainlycheckingthegraybalance,gradationsofYMCBksingecolorandfogging. Checkitem
Gradation Light areas Fogging Graybalance White White
Checkmethod
Checkthat64gradationsdensityisproperlyreproducedin eachcolor. Checkthatfoggingappearsonwhiteimageareaonly. Checkthatdensityisevenineachcolorongrayscalearea.
Assumedcause
FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDrumUnit(endoflife) FailureofLaserScannerUnit FailureofDrumUnit(endoflife)
T-6-8
F-6-6
6-6
6
Troubleshootingitems
Troubleshootingitemslist
Category
6-7
ImageFaults
Imagefoggingduetotheelectrostaticchargefailure
Item Reference
6-x 6-x 6-x 6-x 6-x 6-x
Image Displacement/blur/ Foggyimageduetochargefailure failure smear/fogging 35mmpitchghostduetotonerdeterioration 35mmunevendensityduetocyclevariationof DevelopingCylinder Dirt/line 95mmunevendensityonpaperleadedge Blankimage/line Colorspotduetolaserexposurefailure Secondarytransferblankimage FixingwrinkleduetodeteriorationofribonFixingInlet Guide SoiledimageduetotheoilattachedtotheFixing SeparationGuide Operationfailure
F-6-7
InCasethatPaperSettingforthePoorImageis"PlainPaper"
1)Targetcurrentsettingofdischargecurrentcontrol (COPIER>ADJUST>HV-PRI>DIS-TGM/TGC/TGK)<Level2> Thesettingvalueoftheapplicableservicemodeissetto"+2."Ifnotimproved,thesetting valueisincreasedbyevery[+2]. 2)AdjustmentofelectrostaticchargeACcurrent (COPIER>ADJUST>HV-PRI>OFSTAC-M/OFSTAC-C/OFSTAC-K)<Level1>
6-7
6
Ifnotimproved.
6-8 35-mmpitchghostduetotonerdeterioration
Thesettingvalueoftheapplicableservicemodeissetto"+2."Thesettingvalueissetto+4,
InCasethatPaperSettingforthePoorImageis"HeavyPaper"
1)Targetcurrentsettingofdischargecurrentcontrol(COPIER>ADJUST>HV-PRI>DIS-TGM2/ TGC2/TGK2)<Level2> Thesettingvalueoftheapplicableservicemodeissetto"+2."Ifnotimproved,thesetting valueissetto+4. 2)AdjustmentofelectrostaticchargeACcurrent(COPIER>ADJUST>HV-PRI>OFSTACM2/ OFSTACC2/OFSTACK2)<Level1> Thesettingvalueoftheapplicableservicemodeissetto"+2."Thesettingvalueissetto+4, Ifnotimproved. [Notesaboutremedy] A drum life will be influenced if the 2nd service mode (adjustment of electrostatic charge AC current)ischanged. Forthisreason,pleasedonotsetthesettingvalueto+4ormoreatthemaximum. [Occurrencearea] Developingcylinder [Cause] Incasethattheimagepattern,whichhasextremeshadingdifferences,iscopiedunderthe hightemperatureandhighhumidityenvironment,thedeteriorationtonerofapreviousimage mayadhereonadevelopingcylinder.Forthisreason,theinversionresidualimage(negative ghost)ofthepreviousimagemayoccurinthenextimage. [Occurrencecondition] Incasethattheimagepatternwithextremeshadingdifferencesiscopied(thehalftoneimage wascopiedimmediatelyafterthesolidimage) [Remedy] 1)TargetedvaluesettingofATRcontrol(COPIER>ADJUST>DENS>P-TG-Y/M/C/K)<Level2> Theapplicableservicemodesettingvalueforthecolor,whichthepoorimagehasoccurred, issetto"-1." 2)Aftercyclingthepowerofthemainunit,copy8A3solidimages. Asaresult,iftheimageonthe8thsheetischeckedandadefectisnotimproved,please moveontothefollowingstep. 3)Lowerthesettingvalueoftheapplicableservicemodeby1step. 4)Aftercyclingthepowerofthemainunit,copy8A3solidimages. 5)Checktheimageonthe8thsheet. 6)Ifapoorimageisnotimproved,repeatStep3)-5).
F-6-8
6-8
6
ofthedevelopingcylinder
6-9 UnevenImageDensityat95mmofPaperLeadingEdge
About 95mm
F-6-10
Usually,thepaper,whichpassedtheFixingUnit,isfedtotheInnerFeedRolleralongwith theseparationguide.However,whenthinpaperisused,sincetheelasticityofthepaperis
F-6-9
low,thereisapossibilitythatthepapermaybepulledbytherollerifthepaperleadingedge reachestheInnerFeedRoller. As a result, since the paper, which met the separation guide, comes floating, the nip angle of theFixingUnitchanges. Forthisreason,adensitychangemayoccurataround95mmfromtheimageleadingedge. [Occurrencecondition] Incasethatthesolidimageiscopiedonthethinpaperunderthehightemperatureandhigh humidityenvironment
IncasethatthedurableadvancedDevelopingAssemblyisusedunderthehightemperature and high humidity environment, the slight periodic deflection on the developing cylinder may occur.Asaresult,sincethegapbetweenthedevelopingcylinderandthedrumbecomes uneven,theunevenimagedensityinacycleof35mmduetoadevelopingfailuremayoccur. [Occurrencecondition] IncasethatthedurableadvancedDevelopingAssemblyisusedunderthehightemperature andhighhumidityenvironment. Thisphenomenontendstooccur,whenasolidimageorahalftoneimageiscopied. [Remedy] AdjustmentofthedevelopingACbiasmaximumvalue(COPIER>OPTION>IMG-FIX>ADJVPP)<Level2> Theapplicableservicemodesettingvalueissetto"-1."Ifadefectisnotimproved,checkthe imageswithloweringthesettingvalueonestepbyonestep.
[Remedy] Pleaseperformthefollowingsteps.
IncasethatthePaperSettingforthePoorImageis"ThinPaper"
SettingoftheITOPtemperatureinthinpaper(COPIER>OPTION>IMG-TR>FXS-TMP5) <Level2> Setthesettingvalueoftheapplicableservicemodeto"-1."Ifnotimproved,setthesetting valueto"-2."
6-9
6-10
[Remedy] WheninstallingtheDrumUnit(Bk)tothehostmachine,performthefollowingprocedures. 1)PullouttheProcessUnit. 2)RemoveadummyDrumorDrumUnit. 3)PlacethehalffoldpaperontheDevelopingAssembly(Bk).
Paper
IncasethatthePaperSettingforthePoorImageis"PlainPaper1"
SettingoftheITOPtemperatureintheplainpaper1(COPIER>OPTION>IMG-FIX>FX-S-TMP) <Level2> Setthesettingvalueoftheapplicableservicemodeto"-1."Ifnotimproved,setthesetting valueto"-2." [Notesaboutremedy] If the applicable service mode is changed and a heavy paper is fed, fixing capability may deteriorate.
Missingcolorduetothelaserexposurefailure
4)Whilethepaperisset,installtheDrumUnit(Bk)tothehostmachine. F-6-12
Drum Unit (BK)
F-6-11
6-10
6-11 Blankareacasedbypoorsecondarytransfer
5)Holdthefoldedportionandpullthispaperouttothedirectionofupper.
Paper
F-6-14
F-6-15
[Occurrencearea] SecondaryTransferOuterRoller [Cause] Sincetheresistanceofapaperchangeswhentherecycledpaperhavingbadsurfacenature isusedunderthehightemperatureandhighhumidityenvironment,thecurrentvalueofthe Secondary Transfer may be insufficient. As a result, the blank area caused by Secondary Transferfailuremayoccur. [Occurrencecondition] Incasethattherecycledpaperhavingbadsurfacenatureisusedunderthehightemperature andhighhumidityenvironment. Thisphenomenonwillbemoreobviouswhenabluesolidimageiscopied. [Remedy] Pleaseperformthefollowingsteps. 1) Check environmental classification inside the machine. Indication of inside environmental classification (COPIER>DISPLAY>MISC>ENV-TR) <Level1> 2)Checkthe"papertype"whenthepoorimageoccurred.(Example:Plainpaper1) 3) Check the "printing surface" which the poor image occurred. (Example: In the case of a first side)
6-11
6
VTR>XXXX).
6-12
Setthesettingvalueoftheapplicableservicemodeto"+10"aftercheckingthesub-item namecorrespondingtoXXXXfromthefollowingtable.Ifnotimproved,pleaseincreasethe settingvalueby+10each. (Example: When the paper type is the plain paper 1, environmental classification is 1 and it is on a first side, COPIER>ADJUST>HVTR>2TR-N1) Papertype
PlanePaper1 64~82g PlanePaper2 83~105g ThinPaper 52~64g RecycledPaper
4)PerformadjustmentofsecondarytranscriptionATVCtargetcurrent(COPIER>ADJUST>H
Environmental Classification
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
Envelope
Transparency
[Notesaboutremedy] influenced.
Iftheservicemodeischanged,thelifeoftheSecondaryTransferOuterRollerwillbe Forthisreason,pleasedonotsetthesettingvalueto+80ormoreatthemaximum.
6-12
6-13
FixingwrinkleduetodeteriorationofribonFixingInletGuide
F-6-16
Whenmaking2-sidedcopiesofsolidimagecontinuouslyinhightemperature&highhumidity environment,ribsideontheFixingInletGuideisdeterioratedandresinpartmaybescraped. Asaresult,whentheleadingedgeofpaperenterstheFixingInletGuide,itistrappedbythe scraped rib and the paper deflects leading to the wrinkle at the trailing edge of paper. [Condition] Whenmaking2-sidedcopiesofsolidimagecontinuouslyinhightemperature&highhumidity environment. [FieldRemedy] ReplacetheFixingInletGuide.
6-13
6
Guide
6-14
SoiledimageduetotheoilattachedtotheFixingSeparation
120mm
[Location] LeadingedgeofFixingSeparationGuide [Cause] WhenthepaperpassesthroughtheFixingAssembly,oiloffusedtonermayattachtothe leadingedgeofFixingSeparationGuideanditmayaccumulate. Atthattime,whenmaking2-sidedsolidprintwith2-colors,curledleadingedgeofpaperon 2ndsidemaycontactwiththeDeliveryFlapper. Thus,movementofthispaperchangesanditmaytouchtheleadingedgeofFixing SeparationGuide.Asaresult,oilattachedtotheleadingedgeofguidemayappearonthe image. [Condition] WithusingtheFixingAssemblythatisusedoveraprolongedperiod,whenmaking2-sided solidprintwith2-colors. [FieldRemedy] DrywipetheleadingedgeofFixingSeparationGuidewithling-freepaper.
F-6-18 F-6-19
6-14
6
OperationError
6-15
NoisearoundtheFixingFilmUnit
[Location] FixingFilmUnit [Cause] BecausethegreaseinsidetheFixingFilmdeterioratesduetoprolongeduse,sliding performancebetweentheFixingFilmandtheheatersurfacemaybedecreased. Asaresult,theFixingFilmcontactswiththeheatersurfacewhenitrotatesandnoisemaybe generated. [FieldRemedy] By pushing the Fixing Film area, grease inside the film circulates and sliding performance will beimproved. Operationprocedureisasbelow. 1)RemovetheFixingUnit. 2)ChangethedirectionoftheFixingAssembly.(PlacetheFixingAssemblywheretheDrawer Connecterfacesup.)
Drawer connector
F-6-21
F-6-20
3)WhilepushingtheFixingFilmareawithlint-freepaper,moveitrightandleft2times.
6-15
6
CannotclosetheProcessUnit
[Location] ProcessUnit [Cause]
6-16
[Occurrencecondition] Thispaper(52g/m2to63g/m2)isselectedandthepaperstackisdeliveredfromthe corresponding finisher. [FieldRemedy] Changethepaperselectiontoplainpaper1(64g/m2~81g/m2)anddeliverthepaperstack. Approx.19%ofproductivitycanbeenhanced(inthefollowingcondition). Condition:A4paperand10sheetsstackdelivery(1-pointstaple) [Noteatoperation] Feed speed is enhanced when the plain paper 1 (64g/m2 ~ 81g/m2) is specified for paper selection. However,thepossibilitytogeneratetheelectrostaticisalsoincreasedwhenthefeedspeedis enhancedanditmaycausethealignmentfailure. Ifsuchacase,changethepaperselectiontothinpaper(52g/m2~63g/m2).
IfthemainpowerswitchisturnedOFFjustafterthecopyoperation(approx.within5 seconds)andtheProcessUnitisopened,theLaserShutterMaynotbeclosed. Asaresult,therearsideofProcessUnitandtheLaserShutterinterfereeachotherwhenthe UnitisclosedandtheProcessUnitcannotbeinstalledtothehostmachine. [OccurrenceCondition] IfthemainpowerswitchisturnedOFFjustafterthecopyoperation(approx.within5 seconds)orifthepowerplugisdisconnectedwithoutturningOFFthemainpowerswitch. [FieldRemedy] ProcessUnitcanbeinstalledtothehostmachinebystronglypushingit. However,iftheUnitisinstalledtothehostmachinewithbruteforce,itmaydamageother parts.Thus,besuretofollowthebelowoperationprocedure. 1)TurnOFF/ONthemainpowerswitch.(LaserShutterisclosedautomatically.) 2)WhiletheProcessUnitremainspulledout,makesurethattheLaserShutterissurely closed.Atthistime,donotputyourhandsinsidethemachine. 3)TurnOFFthemainpowerswitchandinstalltheProcessUnittothehostmachine.
Productivitydecreaseatstackdeliveryinthinpaper(52g/m2~ 63g/m2)mode<StapleFinisherC1/SaddleStitchFinisherC1>
[Location] ProcessTrayontheStapleFinisherC1/SaddleStitchFinisherC1 [Cause] Whenthethinpaper(52g/m2to63g/m2)isselectedandthepaperstackisdeliveredfrom the corresponding finisher, electrostatic is generated under the low humidity environment becausethepaperisfractionedintheProcessTraycausingpaperattraction.Asaresult, alignmentfailuremayoccur. Toavoidthis,theelectrostaticispreventedfrombeinggeneratedbydeceleratingthefeed speedincaseofforegoingcondition.
6-16
6
Upgradingprocedure
Outline
6-17
DisplayonSST
iAC5051 SYSTEM LANGUAGE RUI RPTL MOBPR BOX COPY INTRO SEND MEAP MEDIA SMCNT DCON FLASH WebDAV KEY RCONS RCOND FIN_CON SDL_CON EXP_CON
Remarks
Yes
---
iAXXXX iAC5051
Yes Yes
----StapleFinisher-C1/BookletFinisher-C1 Saddle finisher C1 External2HolePuncher-B1 External2/3HolePuncher-B1 External2/4HolePuncher-B1 External4HolePuncher-B1 InnerFinisher-A1 VoiceGuidanceKit VoiceOperationKit WebAccessSoftware-H1 SearchablePDFkit
T-6-11
Fin_C1 EXP-B1
--Inner finisher controller Voicecompositiondictionary Voicerecognitiondictionary WEBbrowser OCRdictionary G3FAX IFN_A1 iAC5051 FIN_CON TTS ASR BROWSER SDICT G3FAX Yes
Yes ---
Yes
---
iAXXXX iAC5051
6-17
6
ServiceSupportTool(SST)
SupportedVersion
UseSSTVer.4.22orlater.
6-18
DownloadMode
Only safe mode is available as the download mode for the equipment. . Asfortheexistingmodels,normalmodeandsafemodeareavailable,andselecteither onedependingontheintendeduse. NormalMode: Normalupgradework,batchdownloadwork SafeMode: FormattingaftertheHDDreplacement,downloadwork With the equipment, all works related to upgrade/download are possible in safe mode.
Features
SimpleMode
ItisahighlyconvenientmodeaddedfromSSTVer.4.02. (1) Auto Identification of Connected Model
IncasethecombinationofthesystemsoftwareregisteredinSSTisnewerthanthatin the equipment, the new one is automatically selected. If the combination of the system softwareregisteredinSSTisold,itwillnotbeselected.Inaddition,manualselectionis alsoavailable. (3) Auto Identification of Download Mode
Identifythedownloadmode(normalmode/safemode)andindicatethemessageif changingthedownloadmodeisneeded.(XXXXXXXXXXXXXXXXXXXXXXXXXXXXX)
InitializationFunctionforServiceModePassword
AfunctionaddedfromSSTVer.4.11. Incasetheservicemodepasswordisforgotten,itisusedtoinitializeit. XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
6-18
ErrorCode
Overview ErrorCode JamCode AlarmCode
7
Overview
Outline
7-2
Explanation
Thiscodeisdisplayedwhenanerroroccursonthemachine. Thiscodeisdisplayedwhenajamoccursinsidethemachine.
Reference
Alarmcode Thiscodeisdisplayedwhenafunctionofthemachineismalfunctioned.
T-7-1
7-2
7
ErrorCode
ErrorCodeDetails
Ecode Detail Location Code
E001 0000 05
7-3
Ecode Detail Location Code
E001 0003 05
Item
Description
Item
Description
E001
0001
05
Title AbnormalhightemperatureinMainThermistor1,2 Description MainThermistor1,2(TH1)detects260degCormorefor0.2 sec. Remedy 1.Gothroughthefollowing:DISPLAY>ANALOG>FIX-C, orDISPLAY>ANALOG>FIX-E;ifit'slessthan260degC, gothroughthefollowingtocleartheerror:COPIER>FUNCT ION>CLEAR>ERR;andthenturnOFF/ONthepower. Itit's260degCormore,donotturnonthepowerbefore replacingtheFilmUnit. 2.ReplacetheFilmUnit. 3.ReplacetheFixingShutterUnit. 4.ReplacetheDCControllerPCB(UN1). MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR Title AbnormalhightemperatureinSubThermistor1,2 Description SubThermistor1,2(TH1)detects275degCormorefor0.2 sec. Remedy 1.Gothroughthefollowing:DISPLAY>ANALOG>FIX-E2 orDISPLAY>ANALOG>FIX-E3;ifit'slessthan275deg C,gothroughthefollowingtocleartheerror:COPIER> FUNCTION>CLEAR>ERR;andthenturnOFFandthen ONthepower. Ifit's275degCormore,donotturnonthepowerbefore replacingtheFilmUnit. 2.ReplacetheFilmUnit 3.ReplacetheFixingShutterUnit 4.GothroughthefollowingtocheckdriveofFM5andFM6: COPIER>FUNCTION>PART-CHK>FAN;ifnotworking properly,replacethefan. 5.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR
E003
0000
05
Title Hightemperatureerrordetectedbyhardware Description Hardwaredetectsabnormalhightemperatureofthe Thermistor(MainThermistor1:264degC,MainThermistor 2:265degC,SubThermistor1,2:280degC)for400msec consecutively. Remedy 1.IfthedetectedtemperatureoftheThermistorislessthan the abnormal high temperature specified for Thermistor, gothroughthefollowingtocleartheerror:COPIER> FUNCTION>CLEAR>ERR;andthenturnOFFandthen ONthepower. Ifit'satabnormallyhightemperature,donotturnonthe powerbeforereplacingtheFilmUnit. 2.ReplacetheFilmUnit 3.ReplacetheFixingShutterUnit 4.GothroughthefollowingtocheckdriveofFM5and FM6:COPIER>FUNCTION>PART-CHK>FAN;ifthenot workingproperly,replacethefan. 5.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR Title ErrordetectedwhentheHeaterisON Description AftertheHeaterwasturnedON,MainThermistor2,Sub Thermistor1orSubThermistor2detects20degCormore and50degCorlessfor3sec. Remedy 1.Gothroughthefollowingtocleartheerror:COPIER> FUNCTION>CLEAR>ERR;andthenturnOFFandthen ONthepower. 2.CheckconnectionoftheConnectors(Thermistor ConnectorandACConnector). 3.ReplacetheFilmUnit 4.ReplacetheFixingShutterUnit 5.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR
7-3
7
Ecode Detail Location Code
E003 0001 05
7-4
Description Ecode Detail Location Code
E004 0000 05
Item
Item
Description
E003
0002
05
E003
0004
05
Title Abnormaldetectionduringpaperfeeding Description Duringprintcontrol,SubThermistordetects70degCor lessfromthetargettemperaturefor5sec. Remedy 1.Gothroughthefollowingtocleartheerror:COPIER> FUNCTION>CLEAR>ERR;andthenturnOFFandthen ONthepower. 2.ReplacetheFilmUnit 3.ReplacetheFixingShutterUnit 4.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR Title AbnormallowtemperaturewhentheHeaterisON (disconnectiondetected) Description AftertheHeaterwasturnedON,anyoftheThermistors detects20degCorlessfor3sec. Remedy 1.Gothroughthefollowingtocleartheerror:COPIER> FUNCTION>CLEAR>ERR;andthenturnOFFandthen ONthepower. 2.CheckconnectionoftheConnectors(Thermistor ConnectorandACConnector). 3.ReplacetheFilmUnit 4.ReplacetheFixingShutterUnit 5.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR Title Timeoutatstart-up Description Afterthestart-upcontrolwasstarted,thestart-upcontrolis notcompletedalthough60sechaspassed. Remedy 1.CheckconnectionoftheConnectors(Thermistor ConnectorandACConnector). 2.ReplacetheFilmUnit 3.ReplacetheFixingShutterUnit 4.ReplacetheDCControllerPCB(UN1) MEMO:Afterperformingtheaboveremedywork,gothrough thefollowingtocleartheerror:COPIER>FUNCTION> CLEAR>ERR
E004
0001
05
E009
0000
05
E009
0001
05
Title Thermistordisconnectiondetectionerror Description Signalname,FUSER_CNCTX,detectsdisconnectionfor 500msecorlonger. Remedy 1.CheckiftheFixingAssemblyisinstalled. 2.CheckconnectionoftheconnectorsinFixingAssembly. 3.CheckconnectionofDCControllerPCB(UN1)Connector. 4.ReplacetheFilmUnit. 5.ReplacetheFixingShutterUnit. 6.ReplacetheDCControllerPCB(UN1). Title Error in detection of welding with fixing relay Description Welding of fixing relay on the AC Driver PCB Remedy 1.ReplacetheACDriverPCB(replacementisnecessary duetoweldingoftherelay). Other fixing-related error occurs (highly possible of E001) 2.Performtheremedyfortheerroroccurred. Title Errorinengagement Description FailedtodetectONwiththeFixingPressureSensor although3sechaspassed. Remedy IfitoccursatthetimeoftheFixingAssemblyremoveand reinstall,itishighlypossiblethattheinstallationofthe Fixing Assembly is insufficient. Therefore, remove and then reinstall the Fixing Assembly first. 1.TurnOFFandthenONthepower. 2.RemovetheFixingAssemblyandtheninstalltheFixing Assembly(toreinstall) 3.DamagecheckforGear,Cum,etc. 4.ReplacetheFixingDriveUnit 5.ReplacetheFixingMotor 6.ReplacetheDCControllerPCB(UN1) Title Errorindisengagement Description FailedtodetectOFFwiththeFixingPressureSensor although3sechaspassed. Remedy IfitoccursatthetimeoftheFixingAssemblyremoveand reinstall,itishighlypossiblethattheinstallationofthe Fixing Assembly is insufficient. Therefore, remove and then reinstall the Fixing Assembly first. 1.TurnOFFandthenONthepower. 2.RemovetheFixingAssemblyandtheninstalltheFixing Assembly(toreinstall) 3.DamagecheckforGear,Cum,etc. 4.ReplacetheFixingDriveUnit 5.ReplacetheFixingMotor 6.ReplacetheDCControllerPCB(UN1)
7-4
7
Ecode Detail Location Code
E012 0X01 05
7-5
Description Ecode Detail Location Code
E012 0X05 05
Item
Item
Description
E012
0X02
05
E012
0X03
05
E012
0X04
05
Title FaultysignalwithDrumRotationSensor1and2 Description FaultysignalwithDrumRotationSensor1and2 Remedy 1.CheckconnectionofDrumRotationSensor1and2 (UN31,UN32,UN33,UN34,UN35,UN36,UN37,UN38) 2.CheckthattheDrumRotationSensorWheelisproperly installed. 3.CheckconnectionoftheDrumDriverPCB(UN4). 4.ManuallyturntheRotoroftheDrumMotor counterclockwiseandcheckthattheDrumRotationSensor Wheelrotates.->Ifthewheeldoesnotrotate,replacethe DrumDriveUnit. 5.TakeouttheDrumRotationSensortocleantheSensor andtheWheel. 6.ReplacetheDrumRotationSensor. 7.ReplacetheDrumDriverPCB(UN4) Title FaultysignalwithDrumRotationSensor1 Description Nodetectionwiththesignalfor80msecormore Remedy 1.CheckconnectionofDrumRotationSensor1. 2.TakeoutDrumRotationSensor1(UN31,UN33,UN35, UN37)tocleantheSensor. 3.ReplaceDrumRotationSensor1. 4.CheckiftheharnessoftheDrumRotationSensorisfaulty (replacetheharnessifit'sdisconnected). 5.ReplacetheDrumDriverPCB(UN4) Title FaultysignalwithDrumRotationSensor2 Description Nodetectionwiththesignalfor80msecormore Remedy 1.CheckconnectionofDrumRotationSensor2(UN32, UN34,UN36,UN38). 2.TakeoutDrumRotationSensor2tocleantheSensor. 3.ReplaceDrumRotationSensor2. 4.CheckiftheharnessoftheDrumRotationSensorisfaulty (replacetheharnessifit'sdisconnected). 5.ReplacetheDrumDriverPCB(UN4) Title FailureinDrumRotationSensorWheel Description FailureisdetectedwiththeDrumRotationSensorWheel Remedy 1.TakeouttheDrumRotationSensortocleantheSensor (UN31,UN32,UN33,UN34,UN35,UN36,UN37,UN38) andtheWheel. 2.ReplacetheDrumRotationSensorWheel. 3.ReplacetheDrumRotationSensor. 4.ReplacetheDrumDriverPCB(UN4)
E012
0X06
05
E012
1000
05
E012
1001
05
E012
2000
05
Title FailureinDrumMotorControl Description UnstablerotationoftheDrumMotor Remedy 1.CheckiftheDrumisinstalled. 2.TakeouttheDrumRotationSensor(UN31,UN32,UN33, UN34,UN35,UN36,UN37,UN38)tocleantheSensorand theWheel. 3.RemovetheProcessUnitandtheninstall(reinstall)the ProcessUnit. 4.ReplacetheDrumUnit. 5.ReplacetheDrumDriverPCB(UN4) Title FailureinrotationofDrumMotor Description The Drum Motor is not rotating at the specified speed/is stopped. Remedy 1.CheckconnectionoftheconnectorwiththeDrumMotor. 2.CheckconnectionoftheconnectorwithDrumDriverPCB (UN4). 3.ChecktheITB(toseeiftheITBisdisplaced/damaged. RefertoE075iftheITBisdisplaced). 4.ReplacetheITBCleaningBlade. 5.ReplacetheDrumDriverPCB(UN4) Title FailureinrotationwhenITBMotorisdriven. Description The ITB Motor is not rotating at the specified speed/is stopped. Remedy 1.CheckconnectionoftheconnectorwiththeITBMotor (M13). 2.CheckconnectionoftheconnectorwiththeITBUnit. 3.CheckconnectionoftheconnectorwiththeDrumDriver PCB(UN4). 4.ChecktheITB(toseeiftheITBisdisplacedordamaged. RefertoE075iftheITBisdisplaced). 5.ReplacetheITBCleaningBlade. 6.ReplacetheDrumDriverPCB(UN4) Title FailureisdetectedbeforeITBmotorisdriven. Description LOCKsignalisdetectedLowbeforetheITBMotorisdriven. Remedy 1.CheckthecableconnectedtotheITBMotor. 2.CheckthecableconnectedtotheDrumDriverPCB(UN4). Title FailureinrotationofDrumMotors(inallcolors)andITB Motor Description FaultyrotationwithalloftheMotorsatthesametime(based ontheassumptionthatallofthemotorsfailtorotate) Remedy 1.ChecktheconnectorontheDrumDriverPCB(UN4). 2.ChecktheconnectorontheRelayBoard(UN5). 3.ChecktheInterlockSwitch. 4.ChecktheDrumDriverHarness.
7-5
7
Ecode Detail Location Code
E012 3000 05
7-6
Description Ecode Detail Location Code
E020 002X 05
Item
Item
Description
E012
3001
05
E012
3002
05
E013
0001
05
E014
0001
05
E020
001X
05
Title FailureinDrumRotationSensors(inallcolors) Description TheDrumRotationSensorsarefaulty(inallcolors)atthe sametime. Remedy 1.ChecktheconnectorontheDrumDriverPCB(UN4). 2.FU3isdisconnectedontheDrumDriverPCB(UN4)-> Checktheharness&replacetheDrumDriverPCB(UN4). Title FailureincontrolofDrumMotorsinallcolors Description ControlsoftheDrumMotors(inallcolors)arefaultyatthe sametime. Remedy ChecktheProcessUnit(toseeifit'sproperlyinstalled). ChecktheDrumUnit(toseeifit'sproperlyinstalled). Title FailureinrotationofDrumMotor(inallcolors) (M1,M2,M3,M4) Description All of the Drum Motors are not rotating at the specified speed/arestopped. Remedy ChecktheconnectorontheDrumDriverPCB(UN4). Title ErrorinRecycleTonerStirringMotor Description The motor failed to rotate at the specified speed. Remedy 1.CheckdisconnectionoftheRecycleTonerStirringMotor (M14) 2.ChecktonerlevelintheRecycleTonercontainer(replace theRecycleTonercontainerifthetonerlevelistoomuch). 3.ReplacetheRecycleTonerStirringMotor. 4.ReplacethePickupFeedDriverPCB(UN2). 5.ReplacetheDCControllerPCB(UN1). Title ErrorinFixingMotor Description The motor failed to rotate at the specified speed. Remedy 1.ChecktheFixingAssembly. 2.RemoveandtheninstalltheFixingAssembly. 3.ReplacetheFixingDriveUnit. 4.ReplacetheFixingMotor. 5.ReplacetheDCControllerPCB(UN1). Title ErrorinDevelopingAssembly Description Patchlevelishigherthanthetargetupperlimitalthoughthe patchlevelwasminimizedatthetimeofpatchinitialization. Remedy Gothroughthefollowing:DISPLAY>P-LED-DA;perform cleaning first If P-LED-DA is 3F or more. 1.CheckinstallationoftheDevelopingAssemblyandthe Drum. 2.CleanthePatchSensor(UN47,UN48,UN49)Window. 3.ReplacethePatchSensor. 4.ReplacetheDrum.
E020
010X
05
E020
020X
05
Title ErrorinDevelopingAssembly Description Patchlevelislowerthanthetargetlowerlimitalthoughthe patchlevelwasmaximizedatthetimeofpatchinitialization. Remedy Gothroughthefollowing:DISPLAY>P-LED-DA;perform cleaning first if P-LED-DA is 3F or more. IfthePatchSensor(UN47,UN48,UN49)valueshows 1-digit,checkthattheDevelopingAssemblyisinstalled,and thenperformremedyfrom"3". 1.CheckinstallationoftheDevelopingAssemblyandthe Drum. 2.CleanthePatchSensorWindow. 3.ReplacethePatchSensor. 4.ReplacetheDrum. Title ErrorinDevelopingAssembly Description Thevalueishigherthantheupperlimitforthepatch. Remedy Gothroughthefollowing:DISPLAY>P-LED-DA;perform cleaning first If P-LED-DA is 3F or more. 1.CheckinstallationoftheDevelopingAssemblyandthe Drum. 2.CleanthePatchSensor(UN47,UN48,UN49)Window. 3.Checkifthepatchsensorisdisconnected. 4.ReplacethePatchSensor. 5.ReplacetheDrum. Title ErrorinDevelopingAssembly Description Thevalueislowerthanthelowerlimitforthepatch. Remedy Gothroughthefollowing:DISPLAY>P-LED-DA;perform cleaning first if P-LED-DA is 3F or more. IfthePatchSensor(UN47,UN48,UN49)valueshows1-digit, performremedyfrom"3". IfthesupplyareaoftheDevelopingAssemblyisbadly soiled,tonercanbeleaked. 1.CheckinstallationoftheDevelopingAssemblyandthe Drum. 2.CleanthePatchSensorWindow. 3.Checkifthepatchsensorisdisconnected. 4.ReplacethePatchSensor. 5.ReplacetheDrum. 6.ChecktonerleakfromtheTonerBufferUnit. 7.ChecktonerlevelintheTonerContainer. 8.Checkshort-circuitoftheharnessoftheTonerSupply Sensor(PS1,PS2,PS3,PS4).
7-6
7
Ecode Detail Location Code
E020 0X30 05
7-7
Description Ecode Detail Location Code
E020 0XB0 05
Item
Item
Description
E020
0X31
05
E020
0X40
05
E020
0X41
05
E020
0X90
05
E020
0X91
05
Title ErrorinDevelopingAssembly Description TheaverageofATRreferencevalueismorethanthe specified value at the time of ATR initialization. Remedy 1.Checkshort-circuitoftheATRSensorHarness. 2.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description TheaverageofATRreferencevalueislessthanthe specified value at the time of ATR initialization. Remedy 1.CheckiftheATRSensor(TS5,TS6,TS7,TS8)Connector isproperlyconnected. 2.Checkshort-circuitoftheATRSensorHarness. 3.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description UnabletoadjustthecontrolvoltageatthetimeofATR initialization: less than the specified value (3.2V). Remedy 1.CheckiftheATRSensor(TS5,TS6,TS7,TS8)Connector isproperlyconnected. 2.Checkshort-circuitoftheATRSensorHarness. 3.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description UnabletoadjustthecontrolvoltageatthetimeofATR initialization: exceeds the specified value (6.8V). Remedy 1.Checkshort-circuitoftheATRSensorHarness. 2.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description ErrorinsignallowerlimitwithATRsamplingdetectedvalue Remedy 1.CheckiftheATRSensorConnectorisdisconnected. 2.Checkshort-circuitoftheATRSensorHarness. 3.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description ErrorinsignalupperlimitwithATRsamplingdetectedvalue Remedy 1.ChecktonerleakfromtheTonerBufferUnit. 2.ChecktonerlevelintheTonerContainer. 3.ReplacetheDevelopingAssembly. 4.Checkshort-circuitoftheharnesswiththeTonerBuffer SupplySensor(PS1,PS2,PS3,PS4).
E020
0XB1 05
E021
0X00
05
Title ErrorinDevelopingAssembly Description ErrorinupperlimitwithT/Dratioatthetimeofprint sequence (LargeamountoftonerintheDevelopingAssembly) Remedy Gothroughthefollowing:DISPLAY>DENS>DENS-X (YMCK);ifDENS-X(YMCK)isslightlyhigherthan5.0%, output10sheetsofsolidimagewiththecolorcausingthe error(toreduceT/Dratio).SeetheServiceModeagainto seeiftheproblemisimproved.Remedyiscompleteifit's improved.Ifnot,performthefollowingremedywork. 1.CheckiftheATRSensor(TS5,TS,6,TS7,TS8)Connector isdisconnected. 2.Checkshort-circuitoftheATRSensorHarness. 3.ReplacetheDevelopingAssembly. Title ErrorinDevelopingAssembly Description ErrorinlowerlimitwithT/Dratioatthetimeofprint sequence (SmallamountoftonerintheDevelopingAssembly) Remedy 1.Output10sheetsofwhite(blank)sheets(toincreaseT/D ratio). 2.ChecktonerleakfromtheTonerBufferUnit. 3.ChecktonerlevelintheTonerContainer. 4.ReplacetheDevelopingAssembly. 5.Checkshort-circuitoftheharnessoftheTonersupply sensor(PS1,PS2,PS3,PS4). Title ErrorinDevelopingMotor*DetailedCodeXindicatescolor; 1=Y,2=M,3=C,4=Bk Description The motor failed to rotate at the specified speed. Remedy 1.ChecktheloadappliedtotheDevelopingAssembly(turn thegearwithyourhandtocheckiftheloadisappropriate.If theloadistoomuch,replacetheDevelopingAssembly). 2.SelectthefollowinginServiceMode:COPIER> FUNCTION>PART-CHK>MTR;andturnM5,M6,M7and M8tocheckthedriveoftheDevelopingMotor.Ifit'snot rotatingproperly,checktheharness(toseeiftheharnessis caught,disconnectedorphysicallyremoved). 3.(Iftheabovemeasuresdonotsolvetheproblem,)replace theDrumDriverPCB(UN4).
7-7
7
Ecode Detail Location Code
E025 0X00 05
7-8
Description Ecode Detail Location Code
E025 0X10 05
Item
Title
Item
Title
Description
ErrorinlockoftheTonerContainerMotor*DetailedCodeX indicatescolor;1=Y,2=M,3=C,4=Bk Description TheTonerContainerMotorisdetectedtobelocked/lock detection. Remedy 1.UsetheattachedtooltomanuallyrotatetheMainDrive Unittochecktheoperation(bycomparingwithothercolor, etc.) IfthemanualrotatingoperationresultsinNG,performthe followingbecauseit'sduetomechanicaloverload. Ifthereisnoproblem,gotostep5. 2.RemovetheDeliveryTraytocheckthepositionofthe projectionattachedatthebackofthegearintheHopper Assembly.Comparewiththegearthatworksproperly.Ifthe positionoftheprojectionisdisplaced,checkthefollowing. Checkthelevertoopen/closetheTonerSmallCover(tosee iftheoperationissmooth,nodamagewiththelever,the leverworksOK(nowrongmovetoup/down).Iftheleveris faulty,replacethelever. 3.RemovetheMainDriveUnittochecktheunit(tosee damage,etc.) Ifit'sresultsinNG,replacetheMainDriveUnit. 4.Manuallyturnthegearonthecaminthehopperunitto checktherotation. Ifit'sresultsinNG,replacetheSet-onHopperUnit. 5.(Iftheabovemeasuresdonotsolvetheproblem)Replace theTonerContainerMotor(M9,M10,M11,M12). ReplacetheDrumDriverPCB(UN4).
E025
0X20
05
TimeouterrorindetectionofTonerBottleSeal/Release Sensor Description FailureindetectionaboutthechangesofON=>OFF=>ON withthesensorwhenthecapoftheTonerContainerwas sealed/released. Remedy 1.UsetheattachedtooltomanuallyrotatetheMainDrive Unittochecktheoperation. 2.IftheMainDriveUnitsidefailedtorotate,checkthedrive (toseedamageofthegear,etc.) Ifit'sresultsinNG,replacetheMainDriveUnit. 3.IftheMainDriveUnitsidefailedtorotatewhiletheDrive rotates,turntheSet-onHopperUnittochecktherotating operation.Ifit'sresultsinNG,replacetheSet-onHopper Unit. 4.IfboththeMainDriveUnitandtheSet-onHooperUnit rotatestogetheroncetheMainDriveUnitismanuallyrotated whilesealing/releasingofthecontainerworksproperly, checkthesensorharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 5.Replacethesensorwhichhasbeencheckedinstep4. 6.(Iftheabovemeasuresdonotsolvetheproblem,)Replace theDrumDriverPCB(UN4). Title Mismatchedphase Description Set-onUnitdetectsopeningoftheTonerContaineraswell astheSmallDoor. Remedy 1.CheckiftheSmallDoorcanbeclosed. 2.ClosetheSmallDoorandturnOFFandthenONthe powertocheckrecovery. 3.ChecktheinstallationoftheOpen/CloseSensorofthe SmallDoor(toseeifit'sinstalledatthecorrectposition). 4.ChecktheSensorHarness(toseeiftheharnessis caught,disconnectedorphysicallyremoved). 5.(Iftheabovemeasuresdonotsolvetheproblem,)Replace theDrumDriverPCB(UN4).
7-8
7
Ecode Detail Location Code
E027 0X00 05
7-9
Description Ecode Detail Location Code
E061 0XE0 05
Item
Item
Title
Description
E032
0001
05
E045
0000
05
E061
0X01
05
Title ErrorinsupplywithDevelopingAssembly Description FailureindetectionaboutthechangesofON=>OFF=> ONwiththesensorwhichdetectsafullrotationofthesupply screw within the specified period of time. Remedy 1.CheckthedamageoftheDevelopingCoupling. Ifit'sdamaged,replacetheDevelopingAssembly. 2.Checkthedamageofthecoupling(withtheDeveloping Assembly)attheHostMachineside. Ifit'sdamaged,removetheMainDriveUnittoreplacethe coupling. 3.TurnthemotorasasingleunitwhiletheDrum/Developing AssemblyisremovedtocheckrotationoftheMainDrive Unit. Ifitdoesnotrotate,replacetheMotor. Iftheabovemeasuresdonotsolvetheproblem,replacethe DrumDriverPCB(UN4). Iftherestillremainstheproblem,replacetheMainDrive Unit. 4.RemovetheHopperUnitandmanuallyturntheSupply InputGeartocheckrotation. Ifit'sresultsinNG,replacetheHopperUnit. Title ASSISTCounterfailedtowork Description Detectionofshort-circuitwiththeCountPulseSignal Remedy Checkthecable(toseeifit'sdisconnected) Title ErrorinTransparencySensor Description WhenthepowerisONorthedoorisclosed,thelightfailed tobebackalthoughthereisnopaper. Remedy 1.CheckinstallationorsoiloftheTransparencySensor (UN51)andtheprism. 2.ChecktheSensorHarness(toseeiftheharnessis caught,disconnectedorphysicallyremoved). 3.ReplacetheTransparencySensor. 4.ReplacethePickupFeedDriverPCB(UN2). Title AbnormalcurrentruntotheDrum(smallcurrentlevelorno drumisfound) Description AbnormalcurrentruntotheDrum(smallcurrentlevelorno drumisfound) Remedy 1.CheckinstallationoftheDrumUnit. 2.CheckifthereisfailureingroundingcontactattheDrum Unitside(suchasloosenedscrewwhichsecurestheplate atthecontactpoint). 3.Checkifthereisfailureingroundingcontactwiththe DrumatProcessUnitside. 4.ReplacetheDrumUnit. 5.ReplacethePre-exposureLEDPCB(UN23-UN30).
E061
0XF0
05
E061
0XF1
05
The change in current level for drum film thickness detection istoomuchcomparedtotheprevioustime. Description The change in current level for drum film thickness detection istoomuchcomparedtotheprevioustime. Remedy 1.CheckwiththeHostMachinewhichgeneratesanerror tocheckifawrongcartridge(whichisdifferentfromthe initializedcartridge)isinstalled. 2.CheckifthereisfailureingroundingcontactattheDrum Unitside(suchasloosenedscrewwhichsecurestheplate atthecontactpoint) 3.Checkifthereisfailureingroundingcontactwiththe DrumatProcessUnitside. 4.ReplacetheDrumUnit. 5.ReplacethePre-exposureLEDPCB(UN23-UN30). Title Abnormalinitialcurrentlevelatthetimeofinitializationof the drum film thickness (large current level) Description Abnormalinitialcurrentlevelatthetimeofinitializationof the drum film thickness (large current level) Remedy 1.CheckinstallationoftheDrumUnit. 2.CheckifthereisfailureingroundingcontactattheDrum Unitside(suchasloosenedscrewwhichsecurestheplate atthecontactpoint). 3.Checkifthereisfailureingroundingcontactwiththe DrumattheProcessUnitside. 4.ForcedinitializationinServiceMode:COPIER> FUNCTION>DPC>DRMRSET(X)X:executionofthe colorcausingtheerror. 5.ReplacetheDrumUnit. 6.Checktheprimarytransfervoltagevalue(ifit'snot appropriate,turnOFFandthenONthemainpowerto forciblyexecutetheATVCcontrol). Title Abnormalinitialcurrentlevelatthetimeofinitializationof the drum film thickness (small current level) Description Abnormalinitialcurrentlevelatthetimeofinitializationof the drum film thickness (small current level) Remedy 1.CheckinstallationoftheDrumUnit. 2.CheckifthereisfailureingroundingcontactattheDrum Unitside(suchasloosenedscrewwhichsecurestheplate atthecontactpoint). 3.Checkifthereisfailureingroundingcontactwiththe DrumatProcessUnitside. 4.ForcedinitializationinServiceMode:COPIER> FUNCTION>DPC>DRMRSET(X)X:executionofthecolor causingtheerror) 5.ReplacetheDrumUnit. 6.ReplacethePre-exposureLEDPCB(UN23-UN30).
7-9
7
Ecode Detail Location Code
E074 0001 05
7-10
Description Ecode Detail Location Code
E075 0003 05
Item
Item
Description
E074
0002
05
E074
0003
05
E075
0002
05
Title Errorindisengagementoperation Description PrimaryTransferDetachmentSensor1failedtobedetected for2secatthetimeofdisengagementoperation Remedy 1.CheckconnectionoftheconnectorwiththeITBUnit. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheDCControllerPCB(UN1). Title Errorinengagementoperation Description PrimaryTransferDetachmentSensor2failedtobedetected for2secatthetimeofengagementoperation Remedy 1.CheckconnectionoftheconnectorwiththeITBUnit. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheDCControllerPCB(UN1). Title ErrorinSensor Description BothPrimaryTransferDetachmentSensor1and2 (PS22,PS23)aredetectedatthetimeofengagement/ disengagementoperation Remedy 1.CheckconnectionoftheconnectorwiththeITBUnit. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheDCControllerPCB(UN1). Title TimeouterrorinsearchingITBsteeringHP Description Unabletodetectchange(Low->HighorHigh->Low)of ITBSteeringSensorSignalalthough10sechaspassed. Remedy 1.CheckdisconnectionoftheITBConnector. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheDCControllerPCB(UN1).
Title ErrorinfulldisplacementofITB(rear) Description ITBDisplacementSensordetectsfulldisplacementposition attherear. Remedy 1.In the case that the floor surface is either warped or uneven, The main body is moved to the flat surface place. 2.CleardisplacementoftheITB(proceduresarewritten below). 3.TheITBdisplacementcorrectionmechanismintheITB unit is confirmed. a).PlacepaperandtakeouttheITBunit. b).liftthefrontleftsideup(wherethecleanerandthemotor arelocated)andholdtheITBUnitasiftotwistit. c).TurntheMotorcounterclockwiseasittomake2to3 roundoftheITB. d).As the ITB is getting closer to the center, fit the marking linewiththeedgeoftheITB. e).Execute the ITB Equilibrium Position Detection Service Mode(COPIER>FUNCTION>MISCP> ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to 3minutes. Title ErrorincombinationofITBDisplacementSensors Description FailedtodeterminepositionduetocombinationoftheITB DisplacementSensors(PS25-PS28)(faultysensor) Remedy 1.CheckdisconnectionoftheITBConnector. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheITBUnit. 4.ReplacetheDCControllerPCB(UN1). Title Error/failureinsearchingITBsteeringHP Description FailedtodetectcorrectHPpositionalthoughthechange (Low->HighorHigh->Low)oftheITBSteeringSensor Signalcanbedetected(executeretrytwice) Remedy 1.CheckdisconnectionoftheITBConnector. 2.CheckdisconnectionwiththeITB(includingtheinsideof theITBUnit). 3.ReplacetheDCControllerPCB(UN1).
E075
0004
05
E075
0005
05
7-10
7
Ecode Detail Location Code
E075 0103 05
7-11
Description Ecode Detail Location Code
E102 0100 05
Item
Item
Description
Title ErrorinfulldisplacementofITB(front) Description ITBDisplacementSensordetectsfulldisplacementposition atthefront. Remedy 1.In the case that the floor surface is either warped or uneven, The main body is moved to the flat surface place. 2.CleardisplacementoftheITB(proceduresarewritten below). 3.TheITBdisplacementcorrectionmechanismintheITB unit is confirmed. a).PlacepaperandtakeouttheITBunit. b).Lifttherearleftsideup(wherethecleanerislocated; oppositetothemotor)andholdtheITBUnitasiftotwistit. c).TurntheMotorcounterclockwiseasittomake2to3 roundoftheITB. d).As the ITB is getting closer to the center, fit the marking linewiththeedgeoftheITB. e).Execute the ITB Equilibrium Position Detection Service Mode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1). Thisservicemodewilltakeapprox.2to3minutes. Title BDerrorofYM-sideScanner Description Failure in detection of BD signal even though the specified periodoftimehaspassedwhenLaserScannerUnit1(YM laser)isstartedormakingprints. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectorofLaserScannerUnit1 3.ReplaceLaserScannerUnit1. Title BDerrorofCBk-sideScanner Description Failure in detection of BD signal even though the specified periodoftimehaspassedwhenLaserScannerUnit2(CBk laser)isstartedormakingprints. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectorofLaserScannerUnit2. 3.ReplaceLaserScannerUnit2. Title BDcycleerror Description When the BD cycle count value is not within the specified range. Remedy 1.TurnOFFandthenONthepower. 2.CheckconnectionofharnessontheLaserScannerUnit. 3.ReplacetheLaserScannerUnit. 4.ReplacetheDCControllerPCB(UN1). 5.Replacetheharness.
E102
0300
05
E110
0100
05
E100
0100
05
E110
0300
05
E100
0300
05
E110
0101
05
E100
B000
05
E110
0301
05
Title FaultyEEPROMofYM-sideScanner Description InthecaseofanerrorinreadingEEPROMintheLaser Driver(YM)orinthecaseofawrongLaserScannerUnit whichdoesnotmatchwiththeHostMachine. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectoroftheLaserScannerUnit1 3.ReplacetheLaserScannerUnit1. Title FaultyEEPROMofCBk-sideScanner Description InthecaseofanerrorinreadingEEPROMoftheLaser Driver(CBk),inthecaseoffailureinreadingthecorrect information(laser,etc.)fromEEPROM,orinthecaseofa wrongLaserScannerwhichdoesnotmatchwiththeHost Machine. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectorofLaserScannerUnit2. 3.ReplaceLaserScannerUnit2. Title ErrorinPolygonMotorofYM-sideScanner(BDlockfailed) Description InthecaseoffailureindetectingFGsignalalthoughthe specified period of time has passed after the Scanner Motor ofLaserScannerUnit1(YMlaser)wasstarted. Remedy 1.ChecktheconnectorofLaserScannerUnit1. 2.ReplaceLaserScannerUnit1. Title ErrorinPolygonMotorofCBk-sideScanner(BDlockfailed) Description InthecaseoffailureindetectingFGsignalalthoughthe specified period of time has passed after the Scanner Motor ofLaserScannerUnit2(CBklaser)wasstarted. Remedy 1.ChecktheconnectorofLaserScannerUnit2. 2.ReplaceLaserScannerUnit2. Title ErrorinPolygonMotorofYM-sideScanner(unreached speed) Description InthecaseoffailureindetectingFGsignalwhilethe ScannerMotorofLaserScannerUnit1(YMlaser)isstably rotating. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectorofLaserScannerUnit1 3.ReplaceLaserScannerUnit1. Title ErrorinPolygonMotorofCBk-sideScanner(unreached speed) Description InthecaseoffailureindetectingFGsignalwhilethe ScannerMotorofLaserScannerUnit2(CBklaser). Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectorofLaserScannerUnit2. 3.ReplaceLaserScannerUnit2.
7-11
7
Ecode Detail Location Code
E112 0000 05
7-12
Description Ecode Detail Location Code
E197 0X02 05
Item
Item
Title Description Remedy
Description
ErrorincommunicationofHOBsingle-shotmode(wrong address) CommunicationfailurebetweenCPUandLSIontheDC ControllerPCB(UN1). 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1). TimeouterrorinHOBsingle-shotmode CommunicationfailurebetweenCPUandLSIontheDC ControllerPCB(UN1). 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1). TimeouterrorinEHOBtransmission-waiting CommunicationfailurebetweentheDCControllerPCB (UN1)andLaserScannerUnit. 1.TurnOFFandthenONthepower. 2.Checkconnectionofharnessonthetargetcolorside(YM/ CK). 3.ReplacetheDCControllerPCB(UN1). 4.ReplacetheLaserScannerUnit. 5.Replacetheharnessonthetargetcolorside(YM/CK). TimeouterrorinEHOBreception-waiting CommunicationfailurebetweentheDCControllerPCB (UN1)andLaserScannerUnit. 1.TurnOFFandthenONthepower. 2.Checkconnectionofharnessonthetargetcolorside(YM/ CK). 3.ReplacetheDCControllerPCB(UN1). 4.ReplacetheLaserScannerUnit. 5.Replacetheharnessonthetargetcolorside(YM/CK). TimeouterrorinHOBtransmission-waiting CommunicationfailurebetweenCPUandLSIontheDC ControllerPCB(UN1). 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1). TimeouterrorinHOBreception-waiting CommunicationfailurebetweenCPUandLSIontheDC ControllerPCB(UN1). 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1).
E112
0001
05
E112
0002
05
E193
0X01
05
E197
0X00
05
E197
0X01
05
Title ErrorinDustproofShutter Description FailedtobeatHPwhenit'sopen(whentheJobisstarted). Remedy 1.CheckinstallationoftheDustproofShutterDrive. 2.CheckiftheconnectoroftheLaserShutterSensor(PS29) ortheLaserShutterMotor(M27)isremoved(disconnected). 3.CheckthestatusofSensorFlag. 4.ReplacetheHPSensor,ReplacetheLaserShutterMotor (M27). Title ErrorinDustproofShutter Description Failure to be back to the HP although the specified period of timehaspassedwhenclosing. Remedy 1.CheckinstallationoftheDustproofShutterDrive. 2.CheckiftheconnectoroftheLaserShutterSensor(PS29) ortheLaserShutterMotor(M27)isremoved(disconnected). 3.CheckthestatusofSensorFlag. 4.ReplacetheHPSensor,ReplacetheLaserShutterMotor (M27). Title ErrorinDustproofShutter Description FailedtomovefromtheHPwhenopening(theJobis started) Remedy 1.CheckinstallationoftheDustproofShutterDrive. 2.CheckiftheconnectoroftheLaserShutterSensor(PS29) ortheLaserShutterMotor(M27)isremoved(disconnected). 3.CheckthestatusofSensorFlag. 4.ReplacetheHPSensor,ReplacetheLaserShutterMotor (M27). Title ErrorinIMG2 Description FailureofLSItimingadjustmentcircuitontheDCController PCB. Remedy 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1). Title ErrorincommunicationofHOBDMAmode Description CommunicationfailurebetweenCPUandLSIontheDC Controller. Remedy 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1). Title ErrorincommunicationofHOBsingle-shotmode(wrong command) Description CommunicationfailurebetweenCPUandLSIontheDC ControllerPCB(UN1). Remedy 1.TurnOFFandthenONthepower. 2.ReplacetheDCControllerPCB(UN1).
E197
0X03
05
E197
0X80
05
E197
0X81
05
E197
0XA0 05
E197
0XB0 05
7-12
7
Ecode Detail Location Code
E202 0001 05
7-13
Description Ecode Detail Location Code
E227 0001 05
Item
Item
Description
E202
0002
05
E202
0101
05
Title ScannerHPerror Description ScannerUniterrorwhenmovingtotheleftsideforHPcheck operation Remedy 1.TurnOFFandthenONthepower. 2.CheckthedriveofScannerMotor.(OpentheDFUnitto checktheoperationofMotor.) 3. Check the flag position of Scanner Home Position Sensor andScannerUnit. 4.ReplacetheReaderControllerPCB. Title ScannerHPerror Description ScannerUniterrorwhenmovingtotherightsideforHP checkoperation Remedy 1.TurnOFFandthenONthepower. 2.CheckthedriveofScannerMotor.(OpentheDFUnitto checktheoperationofMotor.) 3. Check the flag position of Scanner Home Position Sensor andScannerUnit. 4.ReplacetheReaderControllerPCB. Title GlassHPerror *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description GlasserrorwhenmovingtotheleftsideforHPcheck operation 1.TurnOFFandthenONthepower. 2.CheckthedriveofGlassShiftingMotor.(Settheservice mode:FEEDER>FUNCTION>MTR-CHK>7.Then,set FEEDER>FUNCTION>MTR-ON.) 3. Check the flag position of Scanner Home Position Sensor andScannerUnit. 4.ReplacetheReaderControllerPCB. Title GlassHPerror *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description GlasserrorwhenmovingtotherightsideforHPcheck operation Remedy 1.TurnOFFandthenONthepower. 2.CheckthedriveofGlassShiftingMotor.(Settheservice mode:FEEDER>FUNCTION>MTR-CHK>7.Then,set FEEDER>FUNCTION>MTR-ON.) 3. Check the flag position of Scanner Home Position Sensor andScannerUnit. 4.ReplacetheReaderControllerPCB. Remedy
E227
0002
05
E227
0003
05
E202
0102
05
E227
0004
05
Title Powersupply(24V)error Description 24VporterrorwhenthepoweristurnedON Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Powersupply(24V)error Description 24Vporterrorwhenajobisstarted Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Powersupply(24V)error Description 24Vporterrorwhenajobisended Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Powersupply(24V)error Description 24Vporterrorwhenloading Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB.
7-13
7
Ecode Detail Location Code
E227 0101 05
7-14
Description Ecode Detail Location Code
E240 0002 05
Item
Item
Title Description
Description
3minuteshaspassedsincethestatusremainedtobe waiting for image output request Noresponseafter3minuteshaspassedsincetheimage output request from the Main Controller to the DC Controller duringprinting. Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB1. Keeponrotatingafterthejam(enginebug) Enginekeepsrotatingwhenjamoccurs. Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB1. Errorincontrollercommunication Noresponseafter1.5minuteshaspassedsincetheprint request from the Main Controller to the DC Controller. Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB1. Timeout error in Dhalf request Noresponseafter1.5minuteshaspassedsincetheauto adjustment request from the Main Controller to the DC Controller. Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB1. Errorinbackupaccess ErrorincheckingofBackUpSRAMboard.Tobedetectedby BootROM. 1.CheckiftheBackUpSRAMPCBisinstalledornot. 2.Removeandtheninstall(reinstall)theBackUpSRAM PCB. 3.ReplacetheBackUpSRAMPCBwithanewone. EEPROMerror ErroratEEPROMpower-onforReaderControllerPCB 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.ReplacetheReaderControllerPCB.
E227
0102
05
E227
0103
05
E240
0000
05
E240
0001
05
Title Powersupply(24V)error Description 24VporterrorwhenthepowerofDFUnitisturnedON Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Powersupply(24V)error Description 24VporterrorwhenajobisstartedintheDFUnit Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Powersupply(24V)error Description 24VporterrorwhenajobisendedintheDFUnit Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.Checkthe24VportoftheReaderControllerPCBandDF DriverPCB. 4.CheckthepowersupplyandRelayPCBonthePrinter side. 5.ReplacetheReaderControllerPCBandDFDriverPCB. Title Errorincommunicationdata Description Whencommunicationdataerrorbetweenthecontrollerand DCControllerPCBisdetected. Remedy Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB. Title 3minuteshaspassedsincethestatusremainedtobe waiting for pickup request Description Noresponseafter3minuteshaspassedsincethepickup request from the Main Controller to the DC Controller during printing. Remedy Checkconnectionoftheconnector. CheckconnectionoftheSubPCBintheControllerBox. CheckconnectionandreplacetheDCControllerPCB(UN1)/ MainControllerPCB1.
Remedy
E240
0003
05
E240
0004
05
E240
0005
05
Title Description
Remedy
E248
0000
05
E248
0001
05
7-14
7
Ecode Detail Location Code
E248 0002 05
7-15
Description Ecode Detail Location Code
E270 0101 05
Item
Item
Title
Description
E248
0003
05
E270
0001
05
E270
0002
05
Title EEPROMerror Description EEPROMwritingerrorforReaderControllerPCB Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.ReplacetheReaderControllerPCB. Title EEPROMerror Description ReadingerrorafterwritingtoEEPROMforReaderController PCB Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.ReplacetheReaderControllerPCB. Title ScannerUnit(PaperFront)VSYNCsignalerror Description DuetotheVSYNCerrorintheScannerUnitPCB(Paper Front)whichcommunicateswithReaderControllerPCB, VSYNCsignalisnotsentappropriately,sotheimageerror occursortheoperationstopsabnormally. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperFront),andcheckthatthe Cableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 4.ReplacetheReaderControllerPCB. 5.ReplacetheScannerUnit(PaperFront). Title DDIHSYNCerror Description DuetotheDDIhardwareHSYNCsignalerror,VSYNC signalisnotsentappropriately,sotheimageerroroccursor theoperationstopsabnormally. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 3.ReplacetheDDI-SCablebetweenReaderandPrinter. 4.ReplacetheReaderControllerPCB.
E280
0001
05
E280
0101
05
ScannerUnit(PaperBack)VSYNCsignalerror *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description DuetotheVSYNCerrorintheScannerUnitPCB(Paper Back)whichcommunicateswithReaderControllerPCB, VSYNCsignalisnotsentappropriately,sotheimageerror occursortheoperationstopsabnormally. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperBack),andcheckthatthe Cableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 4.ReplacetheReaderControllerPCB. 5.ReplacetheScannerUnit(PaperBack). Title CommunicationerrorbetweenReaderControllerPCBand ScannerUnit(PaperFront) Description Within specified time, communication between Reader ControllerPCBandScannerUnit(PaperFront)cannotbe made. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperFront),andcheckthatthe Cableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 4.ReplacetheReaderControllerPCB. 5.ReplacetheScannerUnit(PaperFront). Title CommunicationerrorbetweenReaderControllerPCBand ScannerUnit(PaperBack) *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description Within specified time, communication between Reader ControllerPCBandScannerUnit(PaperBack)cannotbe made. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperBack),andcheckthatthe Cableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderandPrinter,and checkthattheCableisnotopen-circuit. 4.ReplacetheReaderControllerPCB. 5.ReplacetheScannerUnit(PaperBack).
7-15
7
Ecode Detail Location Code
E302 0001 05
7-16
Description Ecode Detail Location Code
E400 0002 05
Item
Item
Title Description Remedy
Description
CommunicationerrorbetweenReaderControllerPCBand DFUnit CommunicationerrorbetweenReaderControllerPCBand DFUnit 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andDFDriverPCB(SignalCableandPowerSupplyCable), andcheckthattheCablesarenotopen-circuit. 3.ReplacetheCablebetweenReaderControllerPCBand DFDriverPCB. 4.ReplacetheReaderControllerPCB. 5.ReplacetheDFDriverPCB. Pickuperror PickupUnitisnotreturnedtothehomeposition. 1. Check that Pickup Unit Lifter HP Sensor flag moves smoothly. 2.ChecktheconnectionbetweenDFDriverPCBandPickup UnitLifterHPSensor,andcheckthattheCableisnotopencircuit. 3.ChecktheoperationofPickupMotor.(Settheservice mode:FEEDER>FUNCTION>MTR-CHK>9.Then,set FEEDER>FUNCTION>MTR-ON.) 4.ReplacetheDFDriverPCB. Pickuperror PickupUnitdoesnotmovefromthehomeposition. 1. Check that Pickup Unit Lifter HP Sensor flag moves smoothly. 2.ChecktheconnectionbetweenDFDriverPCBandPickup UnitLifterHPSensor,andcheckthattheCableisnotopencircuit. 3.ChecktheoperationofPickupMotor.(Settheservice mode:FEEDER>FUNCTION>MTR-CHK>9.Then,set FEEDER>FUNCTION>MTR-ON.) 4.ReplacetheDFDriverPCB. TrayLifterMotorerror Tray HP Sensor does not detect ON or OFF within specified time. 1.CheckthatafterLifterisliftedfully,itislocatedinthe correctposition.(ChecktheengagementwiththeGear.) 2.ChecktheconnectionbetweenTrayHPSensorandDF DriverPCB,andcheckthattheCableisnotopen-circuit. 3.ChecktheoperationofTrayLifterMotor. 4.ReplacetheDFDriverPCB. 5.ReplacetheTrayLifterMotor.
E302
0101
05
E400
0001
05
Title Errorinpaperfaceshading Description ErrorinshadingRAMaccess The shading value is out of the specified range. Remedy 1.CheckthattheLEDoftheScannerUnit(PaperFront)is lit. 2.ChecktheconnectionbetweenScannerUnit(Paper Front)andLED,andcheckthattheCableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperFront),andcheckthatthe Cableisnotopen-circuit. 4.ChecktheconditionofShadingWhitePlateoftheStream ReadGlass(PaperFront)(scratches,dust,soil,etc.). 5.CheckifScannerUnit(PaperFront)detectsHPcorrectly. (Ifitdoesnotdetectcorrectly,theScannerUnitreachesto theendwhenDFisopened.) 6.ReplacetheScannerUnit(PaperFront). 7.ReplacetheReaderControllerPCB. Title Errorinpaperbackshading Description ErrorinshadingRAMaccess The shading value is out of the specified range. Remedy 1.CheckthattheLEDoftheScannerUnit(PaperBack)is lit. 2.ChecktheconnectionbetweenScannerUnit(Paper Back)andLED,andcheckthattheCableisnotopen-circuit. 3.ChecktheconnectionbetweenReaderControllerPCB andScannerUnitPCB(PaperBack),andcheckthatthe Cableisnotopen-circuit. 4.ChecktheconditionofShadingWhitePlateofthe ScannerGlass(PaperBack)(scratches,dust,soil,etc.). 5.CheckifScannerUnit(PaperBack)detectsHPcorrectly. 6.ReplacetheScannerUnit(PaperBack). 7.ReplacetheReaderControllerPCB. Title CommunicationerrorbetweenReaderControllerPCBand DFUnit Description CommunicationchecksumerrorbetweenReaderController PCBandDFUnit Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderControllerPCB andDFDriverPCB(SignalCableandPowerSupplyCable), andcheckthattheCablesarenotopen-circuit. 3.ReplacetheCablebetweenReaderControllerPCBand DFDriverPCB. 4.ReplacetheReaderControllerPCB. 5.ReplacetheDFDriverPCB.
E401
0001
05
E401
0002
05
E407
0001
05
7-16
7
Ecode Detail Location Code
E407 0002 05
7-17
Description Ecode Detail Location Code
E413 0012 05
Item
Item
Description
E413
0001
05
E413
0002
05
E413
0011
05
Title TrayLifterMotorerror Description PaperFaceDetectionSensorwhenLifterisbeinglifteddoes not become ON within specified time. Remedy 1.CheckthatafterLifterisliftedfully,itislocatedinthe correctposition.(ChecktheengagementwiththeGear.) 2.ChecktheTrayLifterMotor,andalsocheckwhether shiftingoperationisperformednormally. 3.ChecktheconnectionbetweenPaperFaceDetection SensorandDFDriverPCB,andcheckthattheCableisnot open-circuit. 4.ReplacetheDFDriverPCB. 5.ReplacetheTrayLifterMotor. Title DFDisengagementMotorerror Description LeadRoller1disengagementerror Remedy 1.OpentheADFFrontCover,andthenchecktheoperation ofactiveDisengagementMotor. 2.CheckthephysicalpositionofDisengagingHPSensor and its flag. 3.CheckthattheCableofDisengagingHPSensorisnot open-circuit. 4.ReplacetheDFDriverPCB. Title DFDisengagementMotorerror Description LeadRoller1disengagementerror Remedy 1.OpentheADFFrontCover,andthenchecktheoperation ofactiveDisengagementMotor. 2.CheckthephysicalpositionofDisengagingHPSensor and its flag. 3.CheckthattheCableofDisengagingHPSensorisnot open-circuit. 4.ReplacetheDFDriverPCB. Title DFDisengagementMotorerror Description LeadRoller2disengagementerror Remedy 1.OpentheADFFrontCover,andthenchecktheoperation ofactiveDisengagementMotor. 2.CheckthephysicalpositionofDisengagingHPSensor and its flag. 3.CheckthattheCableofDisengagingHPSensorisnot open-circuit. 4.ReplacetheDFDriverPCB.
E423
0001
05
E423
0002
05
E490 0003
05
E500
0000
05
E503
0002
05
Title DFDisengagementMotorerror Description LeadRoller2disengagementerror Remedy 1.OpentheADFFrontCover,andthenchecktheoperation ofactiveDisengagementMotor. 2.CheckthephysicalpositionofDisengagingHPSensor and its flag. 3.CheckthattheCableofDisengagingHPSensorisnot open-circuit. 4.ReplacetheDFDriverPCB. Title DFUnitSDRAMerror *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description SDRAMaccesserror Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandController, andcheckthattheCableisnotopen-circuit. 3.ReplacetheReaderControllerPCB. Title DFUnitSDRAMerror *ThiserroroccursonDuplexColorImageReaderUnit-B1 only. Description SDRAMVerifyerror Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionbetweenReaderandController, andcheckthattheCableisnotopen-circuit. 3.ReplacetheReaderControllerPCB. Title DifferentDFmodel Description InstalledDFisnotthesupportedDF. Remedy 1.Usingtheservicemode,checkiftheinstalledDFmodelis thesamemodelwhichwassetintheservicemode. 2.ChecktheconnectionbetweenReaderControllerPCB andDFDriverPCB,andcheckthattheCableisnotopencircuit. 3.ReplacetheDFDriverPCB. 4.ReplacetheReaderControllerPCB. Title Communicationerror Description 1. The finisher controller PCB is faulty. 2.ThehostmachineDCControllerPCB(UN1)isfaulty. Remedy Thecommunicationwiththehostmachineisinterrupted. Title Communicationerror Description 1. The wiring between the finisher controller PCB and saddle controllerPCBisfaulty. 2. The finisher controller PCB is faulty. 3.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thecommunicationwiththesaddlestitcherisinterrupted.
7-17
7
Ecode Detail Location Code
E503 0003 05
7-18
Description Ecode Detail Location Code
E519 8001 05
Item
Item
Description
E503
0004
05
E505
0001
05
E505
0002
05
E514
8001
05
E514
8002
05
Title Communicationerror Description 1. The wiring between the finisher controller PCB and host machineDCControllerPCB(UN1)isfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. 4.ThehostmachineDCControllerPCB(UN1)isfaulty. Remedy Thecommunicationwiththepuncherunitisinterrupted. Title Communicationerror Description 1. The wiring between the finisher controller PCB and host machinecontrollerPCBisfaulty. 2. The finisher controller PCB is faulty. 3.ThehostmachinecontrollerPCBisfaulty. Remedy Thecommunicationwiththeinserterorthefolderis interrupted. Title EEPROMerror Description 1. The finisher controller PCB is faulty. Remedy ThechecksumfortheEEPROMdatahasanerror. Title EEPROMerror Description 1.ThepunchcontrollerPCBisfaulty. Remedy ThechecksumfortheEEPROMdatahasanerror. Title Rearendassisthomepositionerror Description 1.Therearendassisthomepositionsensor(PI109)isfaulty. 2. The wiring between the finisher controller PCB and rear endassistmotorisfaulty. 3.Theendassistmechanismisfaulty. 4.Therearendassistmotor(M109)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotleavetherearendassisthomeposition whentherearendassistmotorhasbeendrivenfor3 seconds. Title Rearendassisthomepositionerror Description 1.Therearendassisthomepositionsensor(PI109)isfaulty. 2. The wiring between the finisher controller PCB and rear endassistmotorisfaulty. 3.Theendassistmechanismisfaulty. 4.Therearendassistmotor(M109)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotreturntotherearendassisthome positionwhentherearendassistmotorhasbeendrivenfor 3seconds.
E519
0002
05
E520
0001
05
E520
0002
05
Title Gearchangehomepositionerror Description 1.Thegearchangehomepositionsensor(PI117)isfaulty. 2. The wiring between the finisher controller PCB and gear changemotorisfaulty. 3.Thegearchangemechanismisfaulty. 4.Thegearchangemotor(M110)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThegearchangehomepositionsensordoesnotturnOFF whenthegearchangemotorhasbeendrivenfor387 pulses. Title Gearchangehomepositionerror Description 1.Thegearchangehomepositionsensor(PI117)isfaulty. 2. The wiring between the finisher controller PCB and gear changemotorisfaulty. 3.Thegearchangemechanismisfaulty. 4.Thegearchangemotor(M110)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThegearchangehomepositionsensordoesnotturnON whenthegearchangemotorhasbeendrivenfor387 pulses. Title ShiftMotorfailstomovefromHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M4)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheShiftRollerHPSensor(S2)Connectoris physicallyremoved. 4.CheckiftheShiftRollerHPSensor(S2)failureoccurs. Title ShiftMotorfailstoreturntoHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M4)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheShiftRollerHPSensor(S2)Connectoris physicallyremoved. 4.CheckiftheShiftRollerHPSensor(S2)failureoccurs.
7-18
7
Ecode Detail Location Code
E530 8001 05
7-19
Description Ecode Detail Location Code
E531 8001 05
Item
Item
Description
E530
8002
05
E531
0001
05
E531
0002
05
Title Frontaligningplatehomepositionerror Description 1.Thefrontaligningplatehomepositionsensor(PI106)is faulty. 2. The wiring between the finisher controller PCB and front aligningplatemotorisfaulty. 3.Thefrontaligningplateisfaulty. 4.Thefrontaligningplatemotor(M103)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thealigningplatedoesnotleavethealigningplatefront homepositionsensorwhenthealignmentplatefrontmotor hasbeendrivenfor4seconds. Title Frontaligningplatehomepositionerror Description 1.Thefrontaligningplatehomepositionsensor(PI106)is faulty. 2. The wiring between the finisher controller PCB and front aligningplatemotorisfaulty. 3.Thefrontaligningplateisfaulty. 4.Thefrontaligningplatemotor(M103)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thealigningplatedoesnotreturntoaligningplatefront homepositionsensorwhenthealignmentplatefrontmotor hasbeendrivenfor4seconds. Title StaplerMotorfailstomovefromHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M10)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStaplerHPSensor(S18)Connectoris physicallyremoved. 4.CheckiftheStaplerHPSensor(S18)failureoccurs. Title StaplerMotorfailstoreturntoHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M10)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStaplerHPSensor(S18)Connectoris physicallyremoved. 4.CheckiftheStaplerHPSensor(S18)failureoccurs.
E531
8002
05
E532
0001
05
E532
0002
05
E532
8001
05
Title Staplehomepositionerror Description 1. The wiring between the finisher controller PCB and stapler isfaulty. 2.Thestaplerisfaulty. 3. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotleavethestaplehomepositionwhen thestaplemotorhasbeendrivenfor0.4sec. Title Staplehomepositionerror Description 1. The wiring between the finisher controller PCB and stapler isfaulty. 2.Thestaplerisfaulty. 3. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotreturntothestaplehomeposition whenthestaplemotorhasbeendrivenfor0.4sec. Title STPMoveMotorfailstomovefromHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M1)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStaplerMoveHPSensor(S10)Connectoris physicallyremoved. 4.CheckiftheStaplerMoveHPSensor(S10)failureoccurs. Title STPMoveMotorfailstoreturntoHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M1)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStaplerMoveHPSensor(S10)Connectoris physicallyremoved. 4.CheckiftheStaplerMoveHPSensor(S10)failureoccurs. Title Staplershifthomepositionerror Description 1.Thestaplerdrivehomepositionsensor(PI110)isfaulty. 2. The wiring between the finisher controller PCB and stapler shiftmotorisfaulty. 3.Thestaplershiftbaseisfaulty. 4.Thestaplershiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotleavethestaplershifthomeposition whenthestaplershiftmotorhasbeendrivenfor5seconds.
7-19
7
Ecode Detail Location Code
E532 8002 05
7-20
Description Ecode Detail Location Code
E537 8002 05
Item
Item
Description
E535
8001
05
E535
8002
05
E537
8001
05
Title Staplershifthomepositionerror Description 1.Thestaplerdrivehomepositionsensor(PI110)isfaulty. 2. The wiring between the finisher controller PCB and stapler shiftmotorisfaulty. 3.Thestaplershiftbaseisfaulty. 4.Thestaplershiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotreturntothestaplershifthomeposition whenthestaplershiftmotorhasbeendrivenfor20seconds. Title Swinghomepositionerror Description 1.Theswinghomepositionsensor(PI105)isfaulty. 2. The wiring between the finisher controller PCB and swing motorisfaulty. 3.Theswingmechanismisfaulty. 4.Theswingmotor(M106)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotleavetheswinghomepositionwhen theswingmotorhasbeendrivenfor3seconds. Title Swinghomepositionerror Description 1.Theswinghomepositionsensor(PI105)isfaulty. 2. The wiring between the finisher controller PCB and swing motorisfaulty. 3.Theswingmechanismisfaulty. 4.Theswingmotor(M106)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotreturntotheswinghomepositionwhen theswingmotorhasbeedrivenfor3seconds. Title Rearaligningplatehomepositionerror Description 1.Thealigningplaterearhomepositionsensor(PI107)is faulty. 2. The wiring between the finisher controller PCB and aligningplaterearmotorisfaulty. 3.Therearaligningplateisfaulty. 4.Therearaligningplatemotor(M104)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thealigningplatedoesnotleavethealigningplaterear homepositionsensorwhenthealignmentplaterearmotor hasbeendrivenfor4seconds.
E540
0001
05
E540
0002
05
E540
8001
05
Title Rearaligningplatehomepositionerror Description 1.Thealigningplaterearhomepositionsensor(PI107)is faulty. 2. The wiring between the finisher controller PCB and aligningplaterearmotorisfaulty. 3.Therearaligningplateisfaulty. 4.Therearaligningplatemotor(M104)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thealigningplatedoesnotreturntoaligningplaterear homepositionsensorwhenthealignmentplaterearmotor hasbeendrivenfor4seconds. Title TrayLiftMotortimeouterror Description Unable to complete the operation even after the specified periodoftimeduringinitialrotation.WhentheMotor remains in the same area for the specified period of time and the same symptom occurs again after the first retry, it is detectedasanerror. Remedy 1.CheckiftheMotor(M11)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStackTrayClockSensor(S14)Connectoris physicallyremoved. 4.CheckiftheStackTrayClockSensor(S14)failureoccurs. Title TrayLiftMotorclockerror Description Atinitialrotation,whentheTrayLiftMotorrotatesandclock input is not detected within the specified period of time, it is detectedasanerrorifthesamesymptomoccursagainafter the first retry. Remedy 1.CheckiftheMotor(M11)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheStackTrayClockSensor(S14)Connectoris physicallyremoved. 4.CheckiftheStackTrayClockSensor(S14)failureoccurs. Title Tray1timeouterror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy Ifthetraydoesnotreturntohomepositionwhenthetray1 shiftmotorisdrivenfor25seconds. Ifthetraydoesnotmovetootherareawhentray1shift motorisdrivenfor5seconds.
7-20
7
Ecode Detail Location Code
E540 8002 05
7-21
Description Ecode Detail Location Code
E540 8006 05
Item
Item
Description
E540
8003
05
E540
8004
05
E540
8005
05
Title Tray1shiftareaerror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thedangerousareaisreachedbeforethetray1paper surfacesensordetectspapersurfaceduringthepaper surfacedetectionoperation. Adiscontinuousareaisdetectedduringtrayoperation. Title Swingguideswitch/Staplesafetyswitcherror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy Theswingguideswitchorstaplesafetyswitchisactivated whilethetrayisoperating. Title Thetray1shiftmotorclockerror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy TheFGinputcannotbedetectedwhenthetray1shiftmotor hasbeendrivenfor0.2second. Title Thetray1shiftmotorspeederror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignalturnsOFF150msafterthelock detectionsignalturnedON.
E540
8007
05
E542
0001
05
E542
0002
05
Title Thetray1shiftmotoraccelerationerror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignaldoesnotturnONwhenthetray1 shiftmotorhasbeendrivenfor1second. Title Thetray1shiftmotorerror Description 1.Thetray1shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 1 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray1shiftmotor(M107)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignaldoesnotturnOFFwhenthetray1 shiftmotorisatastop. Title AdditionalTrayLiftMotortimeouterror Description Unable to complete the operation even after the specified periodoftimeduringinitialrotation.WhentheMotor remains in the same area for the specified period of time and the same symptom occurs again after the first retry, it is detectedasanerror. Remedy 1.CheckiftheMotor(M12)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheAdditionalTrayClockSensor(S23) Connectorisphysicallyremoved. 4.CheckiftheAdditionalTrayClockSensor(S23)failure occurs. Title AdditionalTrayLiftMotorclockerror Description Atinitialrotation,whentheTrayLiftMotorrotatesandclock signal is not detected within the specified period of time, it is detectedasanerrorifthesamesymptomoccursagainafter the first retry. Remedy 1.CheckiftheMotor(M12)Connectorisphysically removed. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheAdditionalTrayClockSensor(S23) Connectorisphysicallyremoved. 4.CheckiftheAdditionalTrayClockSensor(S23)failure occurs.
7-21
7
Ecode Detail Location Code
E542 8001 05
7-22
Description Ecode Detail Location Code
E542 8006 05
Item
Item
Description
E542
8002
05
E542
8004
05
E542
8005
05
Title Tray1timeouterror Description 1.TheTray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.TheTray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy Ifthetraydoesnotreturntohomepositionwhenthetray1 shiftmotorisdrivenfor25seconds. Ifthetraydoesnotmovetootherareawhentray2shift motorisdrivenfor5seconds. Title Tray2shiftareaerror Description 1.Thetray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy Theupperlimitareaisreachedbeforethetray2paper surfacesensor1detectsthepapersurfaceduringpaper surfacedetectionoperation. Adiscontinuousareaisdetectedduringtrayoperation. Duringevacuationoperation,arrivalattheareabeyondthe tray2papersurfacesensor2isdetectedbeforethissensor detectspapersurface. Title Thetray2shiftmotorclockerror Description 1.TheTray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.TheTray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy TheFGinputcannotbedetectedwhenthetray2shiftmotor hasbeendrivenfor0.2second. Title Thetray2shiftmotorspeederror Description 1.Thetray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignalturnsOFF150msafterthelock detectionsignalturnedON.
E542
8007
05
E567
0001
05
E567
0002
05
Title Thetray2shiftmotoraccelerationerror Description 1.Thetray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignaldoesnotturnONwhenthetray2 shiftmotorhasbeendrivenfor1second. Title Thetray2shiftmotorerror Description 1.Thetray2shiftareasensorPCBisfaulty. 2. The wiring between the finisher controller PCB and tray 2 shiftmotorisfaulty. 3.Thetrayup/downmechanismisfaulty. 4.Thetray2shiftmotor(M105)isfaulty. 5. The finisher controller PCB is faulty. Remedy ThelockdetectionsignaldoesnotturnOFFwhenthetray2 shiftmotorisatastop. Title ShiftRollerReleaseMotorfailstomovefromHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M5)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheShiftRollerReleaseSensor(S3)Connector isphysicallyremoved. 4.CheckiftheShiftRollerReleaseSensor(S3)failure occurs. Title ShiftRollerReleaseMotorfailstoreturntoHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M5)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheShiftRollerReleaseSensor(S3)Connector isphysicallyremoved. 4.CheckiftheShiftRollerReleaseSensor(S3)failure occurs.
7-22
7
Ecode Detail Location Code
E56F 0001 05
7-23
Description Ecode Detail Location Code
E575 0001 05
Item
Title Description
Item
Description
Remedy
E56F
0002
05
Title Description
Remedy
E571
0001
05
Title Description
Remedy
E571
0002
05
Title Description
Remedy
EntranceRollerRelease/StopperHPMotorfailstomove fromHP At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. 1.CheckiftheMotor(M6)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheEntranceRollerRelease/StopperHPSensor (S5)Connectorisphysicallyremoved. 4.CheckiftheEntranceRollerRelease/StopperHPSensor (S5)failureoccurs. EntranceRollerRelease/StopperHPMotorfailstoreturnto HP At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. 1.CheckiftheMotor(M6)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheEntranceRollerRelease/StopperHPSensor (S5)Connectorisphysicallyremoved. 4.CheckiftheEntranceRollerRelease/StopperHPSensor (S5)failureoccurs. GripperOpen/CloseMotorfailstomovefromHP At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. 1.CheckiftheMotor(M7)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheGripperArmHPSensor(S13)Connectoris physicallyremoved. 4.CheckiftheGripperUnitHPSensor(S7)failureoccurs. GripperOpen/CloseMotorfailstoreturntoHP At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. 1.CheckiftheMotor(M7)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheGripperArmHPSensor(S13)Connectoris physicallyremoved. 4.CheckiftheGripperUnitHPSensor(S7)failureoccurs.
E575
0002
05
E584
8001
05
E584
0002
05
Title GripperUnitMoveMotorfailstomovefromHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotmovefromHP,itisdetectedasanerror if the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M2)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheGripperUnitHPSensor(S7)Connectoris physicallyremoved. 4.CheckiftheGripperUnitHPSensor(S7)failureoccurs. Title GripperUnitMoveMotorfailstoreturntoHP Description At initial rotation, when the Motor rotates for specified period oftimeandcannotreturntoHP,itisdetectedasanerrorif the same symptom occurs again after the first retry. Remedy 1.CheckiftheMotor(M2)Connectorisphysicallyremoved. 2.CheckiftheMotorfailureoccurs. 3.CheckiftheGripperUnitHPSensor(S7)Connectoris physicallyremoved. 4.CheckiftheGripperUnitHPSensor(S7)failureoccurs. Title Shutterhomepositionerror Description 1.Theshutterhomepositionsensor(PI113)isfaulty. 2. The wiring between the finisher controller PCB and stack ejection motor, and between the finisher controller PCB and shutterclutchisfaulty. 3.Theshuttermechanismisfaulty. 4.Thestackejectionmotor(M102),shutterclutch(CL101), angstackejectionlowerrollerclutch(CL102)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotleavetheshutterhomepositionwhen thestackejectionmotorhasbeendrivenfor30seconds. Title Shutterhomepositionerror Description 1.Theshutterhomepositionsensor(PI113)isfaulty. 2. The wiring between the finisher controller PCB and stack ejection motor, and between the finisher controller PCB and shutterclutchisfaulty. 3.Theshuttermechanismisfaulty. 4.Thestackejectionmotor(M102),shutterclutch(CL101), angstackejectionlowerrollerclutch(CL102)isfaulty. 5. The finisher controller PCB is faulty. Remedy Thestaplerdoesnotreturntotheshutterhomeposition whenthestackejectionmotorhasbeendrivenfor3 seconds.
7-23
7
Ecode Detail Location Code
E590 8001 05
7-24
Description Ecode Detail Location Code
E592 8001 05
Item
Item
Description
E590
8002
05
E591
8001
05
E591
8002
05
Title Punchhomepositionerror Description 1.Thepunchhomepositionsensor(PI63)andpunchmotor clocksensor(PI62)isfaulty. 2.ThewiringbetweenthepunchcontrollerPCBandsensor isfaulty. 3.Thepunchmechanismisfaulty. 4.ThepunchcontrollerPCBisfaulty. 5. The finisher controller PCB is faulty. Remedy Thepuncherdoesnotdetectthepunchhomeposition sensorwhenthepunchermotorhasbeendrivenfor20 msec. Title Punchhomepositionerror Description 1.Thepunchhomepositionsensor(PI63)andpunchmotor clocksensor(PI62)isfaulty. 2.ThewiringbetweenthepunchcontrollerPCBandsensor isfaulty. 3.Thepunchmechanismisfaulty. 4.ThepunchcontrollerPCBisfaulty. 5. The finisher controller PCB is faulty. Remedy Afterthemotorhasbeenstoppedattimeofpunchmotor initialization,thepuncherdoesnotdetectpunchhome positionsensor. Title Scrapfulldetectionerror Description 1.ThewiringbetweenthescrapfulldetectorPCBandpunch controllerPCBisfaulty. 2.ThescrapfulldetectorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis3.0Vorlessevenwhen thelightemittingdutyofthescrapfulldetectorsensorhas beenincreasedto66%ormore. Title Scrapfulldetectionerror Description 1.ThescrapfulldetectorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthescrapfulldetectorsensorhas beendecreasedto0%.
E592
8002
05
E592
8003
05
E592
8004
05
E592
8005
05
Title Trailingedgesensorerror Description 1.ThewiringbetweentheLEDPCB/photosensorPCBand punchcontrollerPCBisfaulty. 2.TheLEDPCBandphotosensorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis3.0Vorlesseven whenthelightemittingdutyofthetrailingedgesensor (LED5,PTR5)hasbeenincreasedto66%ormore. Title Trailingedgesensorerror Description 1.TheLEDPCBandphotosensorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthetrailingedgesensorhasbeen decreasedto0%. Title Horizontalregistrationsensor1error Description 1.ThewiringbetweentheLEDPCB/photosensorPCBand punchcontrollerPCBisfaulty. 2.TheLEDPCBandphotosensorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.5Vorlessevenwhen thelightemittingdutyofthehorizontalregistrationsensor1 (LED1,PTR1)hasbeenincreasedto66%ormore. Title Horizontalregistrationsensor1error Description 1.TheLEDPCBandphotosensorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthehorizontalregistrationsensor1 (LED1,PTR1)hasbeendecreasedto0%. Title Horizontalregistrationsensor2error Description 1.ThewiringbetweentheLEDPCB/photosensorPCBand punchcontrollerPCBisfaulty. 2.TheLEDPCBandphotosensorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.5Vorlessevenwhen thelightemittingdutyofthehorizontalregistrationsensor2 (LED2,PTR2)hasbeenincreasedto66%ormore.
7-24
7
Ecode Detail Location Code
E592 8006 05
7-25
Description Ecode Detail Location Code
E593 8001 05
Item
Item
Description
E592
8007
05
E592
8008
05
E592
8009
05
E592
800A
05
Title Horizontalregistrationsensor2error Description 1.TheLEDPCBandphotosensorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthehorizontalregistrationsensor2 (LED2,PTR2)hasbeendecreasedto0%. Title Horizontalregistrationsensor3error Description 1.ThewiringbetweentheLEDPCB/photosensorPCBand punchcontrollerPCBisfaulty. 2.TheLEDPCBandphotosensorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.5Vorlessevenwhen thelightemittingdutyofthehorizontalregistrationsensor3 (LED3,PTR3)hasbeenincreasedto66%ormore. Title Horizontalregistrationsensor3error Description 1.TheLEDPCBandphotosensorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthehorizontalregistrationsensor3 (LED3,PTR3)hasbeendecreasedto0%. Title Horizontalregistrationsensor4error Description 1.ThewiringbetweentheLEDPCB/photosensorPCBand punchcontrollerPCBisfaulty. 2.TheLEDPCBandphotosensorPCBisfaulty. 3.ThepunchcontrollerPCBisfaulty. 4. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.5Vorlessevenwhen thelightemittingdutyofthehorizontalregistrationsensor4 (LED4,PTR4)hasbeenincreasedto66%ormore. Title Horizontalregistrationsensor4error Description 1.TheLEDPCBandphotosensorPCBisfaulty. 2.ThepunchcontrollerPCBisfaulty. 3. The finisher controller PCB is faulty. Remedy Thevoltageofthelightreceivedis2.0Vormoreevenwhen thelightemittingdutyofthehorizontalregistrationsensor4 (LED4,PTR4)hasbeendecreasedto0%.
E593
8002
05
E5F0
8001
05
E5F0
8002
05
Title Horizontalregistrationhomepositionerror Description 1.Thehorizontalregistrationhomeposition(PI61)isfaulty. 2.ThewiringbetweenthepunchcontrollerPCBandsensor isfaulty. 3.Thehorizontalregistrationmechanismisfaulty. 4.Thehorizontalregistrationmotor(M62)isfaulty. 5.ThepunchcontrollerPCBisfaulty. 6. The finisher controller PCB is faulty. Remedy Attimeofhorizontalregistrationmotorinitialization,the punchslideunitdoesnotleavethehorizontalhomeposition sensorevenwhenithasbeendrivenfor9mm. Title Horizontalregistrationhomepositionerror Description 1.Thehorizontalregistrationhomeposition(PI61)isfaulty. 2.ThewiringbetweenthepunchcontrollerPCBandsensor isfaulty. 3.Thehorizontalregistrationmechanismisfaulty. 4.Thehorizontalregistrationmotor(M62)isfaulty. 5.ThepunchcontrollerPCBisfaulty. 6. The finisher controller PCB is faulty. Remedy Attimeofhorizontalregistrationmotorinitialization,the punchslideunitdoesnotreturntothehorizontalregistration homepositionsensorevenwhentheunithasbeendriven for37mm. Title Paperpositioningplatehomepositionerror Description 1.Thepaperpositioningplatehomepositionsensor(PI7)is faulty. 2.Thepositioningplatedrivemechanismisfaulty. 3.Thepaperpositioningplatemotor(M4)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpositioningplatehomepositiosensordoesnot turnONwhenthepaperpositioningplatemotorhasbeen drivenfor1500pulses. Title Paperpositioningplatehomepositionerror Description 1.Thepaperpositioningplatehomepositionsensor(PI7)is faulty. 2.Thepositioningplatedrivemechanismisfaulty. 3.Thepaperpositioningplatemotor(M4)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpositioningplatehomepositionsensordoesnot turnOFFwhenthepaperpositioningplatemotorhasbeen drivenfor300pulses.
7-25
7
Ecode Detail Location Code
E5F1 8001 05
7-26
Description Ecode Detail Location Code
E5F4 8001 05
Item
Item
Description
E5F1
8002
05
E5F2
8001
05
E5F2
8002
05
E5F3
8001
05
E5F3
8002
05
Title Paperfoldingmotorlockerror Description 1.Thepaperfoldingmotorclocksensor(PI4)andpaper foldinghomepositionsensor(PI21.isfaulty. 2.Thepaperfoldingrollerdrivemechanismisfaulty. 3.Thepaperfoldingmotor(M2)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thefeedspeedofthepaperfoldrollerreaches5mm/secor less. Title Paperpositioningplatehomepositionerror Description 1.Thepaperfoldingmotorclocksensor(PI4)andpaper foldinghomepositionsensor(PI21)isfaulty. 2.Thepaperfoldingrollerdrivemechanismisfaulty. 3.Thepaperfoldingmotor(M2)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thestatusofthepaperfoldhomepositionsensordoesnot changewhenthepaperfoldmotorhasbeendrivenfor3 seconds. Title Guidehomepositionerror Description 1.Theguidehomepositionsensor(PI13)isfaulty. 2.Theguideplatedrivemechanismisfaulty. 3.TheguideMotor(M3)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy TheguidehomepositionsensordoesnotturnONwhenthe guidemotorhasbeendrivenfor700pulses. Title Guidehomepositionerror Description 1.Theguidehomepositionsensor(PI13)isfaulty. 2.Theguideplatedrivemechanismisfaulty. 3.TheguideMotor(M3)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy TheguidehomepositionsensordoesnotturnOFFwhen theguidemotorhasbeendrivenfor50pulses. Title Aligningplatehomepositionerror Description 1.Thealigningplatehomepositionsensor(PI5)isfaulty. 2.Thealigningplatedrivemechanismisfaulty. 3.Thealigningmotor(M5)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThealigningplatehomepositionsensordoesnotturnON whenthealigningplatemotorhasbeendrivenfor500 pulses. Title Aligningplatehomepositionerror Description 1.Thealigningplatehomepositionsensor(PI5)isfaulty. 2.Thealigningplatedrivemechanismisfaulty. 3.Thealigningmotor(M5)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThealigningplatehomepositionsensordoesnotturnOFF whenthealigningplatemotorhasbeendrivenfor50pulses.
E5F4
8002
05
E5F5
8001
05
E5F5
8002
05
E5F6
8001
05
E5F6
8002
05
Title Stitcher(rear)homepositionerror Description 1.Thestitcherhomepositionsensor(rear)(SW5)isfaulty. 2.Thestitcher(rear)isfaulty. 3.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThestitchinghomepositionsensordoesnotturnONwhen thestitchmotor(rear)hasbeendrivenbackwardfor0.5sec. Title Stitcher(rear)homepositionerror Description 1.Thestitcherhomepositionsensor(rear)(SW5)isfaulty. 2.Thestitcher(rear)isfaulty. 3.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThestitchinghomepositionsensordoesnotturnOFFwhen thestitchmotor(rear)hasbeendrivenforwardfor0.5sec. Title Stitcher(front)homepositionerror Description 1.Thestitcherhomepositionsensor(front)(SW7)isfaulty. 2.Thestitcher(front)isfaulty. 3.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThestitchinghomepositionsensordoesnotturnONwhen thestitchmotor(front)hasbeendrivenforwardfor0.5sec. Title Stitcher(front)homepositionerror Description 1.Thestitcherhomepositionsensor(front)(SW7)isfaulty. 2.Thestitcher(front)isfaulty. 3.ThesaddlestitchercontrollerPCBisfaulty. Remedy ThestitchinghomepositionsensordoesnotturnOFFwhen thestitchmotor(front)hasbeendrivenbackwardfor0.5 sec. Title Paperpushingplatehomepositionerror Description 1.Thepaperpushingplatehomepositionsensor(PI14), paperpushingplatetoppositionsensor(PI15),andpaper pushingplatemotorclocksensor(PI1)isfaulty. 2.Thepaperpushingplatedrivemechanismisfaulty. 3.Thepaperpushingplatemotor(M8)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpushingplatehomepositionsensordoesnotturn ONwhenthepaperpushingplatemotorhasbeendrivenfor 0.5sec. Title Paperpushingplatehomepositionerror Description 1.Thepaperpushingplatehomepositionsensor(PI14), paperpushingplatetoppositionsensor(PI15),andpaper pushingplatemotorclocksensor(PI1)isfaulty. 2.Thepaperpushingplatedrivemechanismisfaulty. 3.Thepaperpushingplatemotor(M8)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpushingplatehomepositionsensordoesnotturn OFFwhenthepaperpushingplatemotorhasbeendriven for150ms.
7-26
7
Ecode Detail Location Code
E5F6 8003 05
7-27
Description Ecode Detail Location Code
E602 0002 00
Item
Item
Description
E5F6
8004
05
E5F6
8005
05
E602
0001
00
Title Paperpushingplatemotorclockerror Description 1.Thepaperpushingplatehomepositionsensor(PI14), paperpushingplatetoppositionsensor(PI15),andpaper pushingplatemotorclocksensor(PI1)isfaulty. 2.Thepaperpushingplatedrivemechanismisfaulty. 3.Thepaperpushingplatemotor(M8)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thenumberofpulsesdetectedbythepaperpushingplate motorclocksensoris6pulsesorless. Title Pushingpositionerror Description 1.Thepaperpushingplatehomepositionsensor(PI14), paperpushingplatetoppositionsensor(PI15),andpaper pushingplatemotorclocksensor(PI1)isfaulty. 2.Thepaperpushingplatedrivemechanismisfaulty. 3.Thepaperpushingplatemotor(M8)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpushingplateleadingedgepositionsensordoes notturnONwhenthepaperpushingplatemotorhasbeen drivenfor0.1sec. Title Pushingpositionerror Description 1.Thepaperpushingplatehomepositionsensor(PI14), paperpushingplatetoppositionsensor(PI15),andpaper pushingplatemotorclocksensor(PI1)isfaulty. 2.Thepaperpushingplatedrivemechanismisfaulty. 3.Thepaperpushingplatemotor(M8)isfaulty. 4.ThesaddlestitchercontrollerPCBisfaulty. Remedy Thepaperpushingplateleadingedgepositionsensordoes notturnOFFwhenthepaperpushingplatemotorhasbeen drivenfor0.5sec. Title ErrorinHDD Description HDDfailedtoberecognized.Startuppartition(BOOTDEV) failedtobefoundatstartup. Remedy 1.TurnOFFthemainswitchandcheckconnectionofHDD cable,andthenturnONthemainswitch. 2.CheckforspinupofHDDwhenturningONthemain switch,orcheckif5V/12Vpowerissupplied. 3.Iftheabovemeasuresdonotsolvetheproblem,replace theHDDandreinstallthesystem.Iftherestillremainsthe problem,replacetheMainControllerPCB1.
E602
0003
00
E602
0006
00
Title ErrorinHDD Description ThereisnosystemforthemainCPU Remedy 1.StartinSafeMode,thenperformoverallformatusingSST andreinstallthesystem(System,Lang,RUI),andthenturn OFFandthenONtheMainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewithHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbortwasdetectedwithBootDevice Remedy 1.ExecutedetectionandrecoveryofWriteAbortSector <InthecaseofdisplayofB/WE-code> 1-1.PerformthefollowingstepsbecauseServiceModeis notavailable. 1-2.TurnOFFthepower.Then,whilepressing1+9keys, turnONthepower.WriteAbortSectorrecoveryroutineis automaticallystartedwhichmakesthescreenblack. 1-3.Afterawhile,progressisdisplayedbecausetheprocess takestime(40to50min.).Theprocessiscompletewhen thescreenturnswhite. <In the case of official display of wrench-mark> 1-1.Setasfollows:CHK-TYPE=0;andexecuteHD-CHECK (40to50min.),andthenturnOFFandthenONthemain switch. 2.Iftheabovemeasuresdonotsolvetheproblem,start upinSafeModetoperformoverallformatusingSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONthemainswitch. 3.Ifnoimprovementisfounddespitetheabovemeasures, itcanbecausedbyfailurewithHDD;therefore,replacethe HDDandreinstallthesystem. Title ErrorinHDD Description ThereisnosystemforthesubCPU Remedy 1.StartupinSafeModeandreinstallthesystem(System, Lang,RUI)usingSST;andthenturnOFFandthenONthe mainpowerswitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-27
7
Ecode Detail Location Code
E602 0007 00
7-28
Description Ecode Detail Location Code
E602 0102 00
Item
Item
Description
E602
0009
00
E602
0012
00
E602
0100
00
E602
0101
00
Title ErrorinHDD Description There is no ICCProfile Remedy 1.StartupinSafeModeandreinstallthesystem(System, Lang,RUI)usingSST;andthenturnOFFandthenONthe mainpowerswitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description There is no Font file in /BOOTDEV/BOOT Remedy 1.StartupinSafeModeandreinstallthesystemusingSST; andthenturnOFFandthenONthemainpowerswitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description There is no file in which the Web browser refers to Remedy 1.StartupinSafeModeandreinstalltheWebbrowser usingSST,andthenturnOFFandthenONthemainpower switch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0103
00
E602
0104
00
E602
0105
00
E602
0110
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-28
7
Ecode Detail Location Code
E602 0111 00
7-29
Description Ecode Detail Location Code
E602 0121 00
Item
Item
Description
E602
0112
00
E602
0113
00
E602
0114
00
Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0122
00
E602
0123
00
E602
0124
00
Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-29
7
Ecode Detail Location Code
E602 0125 00
7-30
Description Ecode Detail Location Code
E602 0203 00
Item
Item
Description
E602
0200
00
E602
0201
00
E602
0202
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0204
00
E602
0205
00
E602
0210
00
E602
0211
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-30
7
Ecode Detail Location Code
E602 0212 00
7-31
Description Ecode Detail Location Code
E602 0222 00
Item
Item
Description
E602
0213
00
E602
0214
00
E602
0221
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0223
00
E602
0224
00
E602
0225
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-31
7
Ecode Detail Location Code
E602 0300 00
7-32
Description Ecode Detail Location Code
E602 0304 00
Item
Item
Description
E602
0301
00
E602
0302
00
E602
0303
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch.
E602
0305
00
E602
0310
00
E602
0311
00
E602
0312
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-32
7
Ecode Detail Location Code
E602 0313 00
7-33
Description Ecode Detail Location Code
E602 0323 00
Item
Item
Description
E602
0314
00
E602
0321
00
E602
0322
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0324
00
E602
0325
00
E602
0400
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-33
7
Ecode Detail Location Code
E602 0401 00
7-34
Description Ecode Detail Location Code
E602 0410 00
Item
Item
Description
E602
0402
00
E602
0403
00
E602
0404
00
E602
0405
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0411
00
E602
0412
00
E602
0413
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-34
7
Ecode Detail Location Code
E602 0414 00
7-35
Description Ecode Detail Location Code
E602 0425 00
Item
Item
Description
E602
0421
00
E602
0422
00
E602
0423
00
E602
0424
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0500
00
E602
0501
00
E602
0502
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-35
7
Ecode Detail Location Code
E602 0503 00
7-36
Description Ecode Detail Location Code
E602 0512 00
Item
Item
Description
E602
0504
00
E602
0505
00
E602
0510
00
E602
0511
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0513
00
E602
0514
00
E602
0521
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-36
7
Ecode Detail Location Code
E602 0522 00
7-37
Description Ecode Detail Location Code
E602 0600 00
Item
Item
Description
E602
0523
00
E602
0524
00
E602
0525
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0601
00
E602
0602
00
E602
0603
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch.
7-37
7
Ecode Detail Location Code
E602 0604 00
7-38
Description Ecode Detail Location Code
E602 0613 00
Item
Item
Description
E602
0605
00
E602
0610
00
E602
0611
00
E602
0612
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0614
00
E602
0621
00
E602
0622
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-38
7
Ecode Detail Location Code
E602 0623 00
7-39
Description Ecode Detail Location Code
E602 0701 00
Item
Item
Description
E602
0624
00
E602
0625
00
E602
0700
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0702
00
E602
0703
00
E602
0704
00
E602
0705
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-39
7
Ecode Detail Location Code
E602 0710 00
7-40
Description Ecode Detail Location Code
E602 0714 00
Item
Item
Description
E602
0711
00
E602
0712
00
E602
0713
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0721
00
E602
0722
00
E602
0723
00
E602
0724
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-40
7
Ecode Detail Location Code
E602 0725 00
7-41
Description Ecode Detail Location Code
E602 0803 00
Item
Item
Description
E602
0800
00
E602
0801
00
E602
0802
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
0804
00
E602
0805
00
E602
0810
00
E602
0811
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-41
7
Ecode Detail Location Code
E602 0812 00
7-42
Description Ecode Detail Location Code
E602 0822 00
Item
Item
Description
E602
0813
00
E602
0814
00
E602
0821
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0823
00
E602
0824
00
E602
0825
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-42
7
Ecode Detail Location Code
E602 0900 00
7-43
Description Ecode Detail Location Code
E602 0904 00
Item
Item
Description
E602
0901
00
E602
0902
00
E602
0903
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=3inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=3inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch.
E602
0905
00
E602
0910
00
E602
0911
00
E602
0912
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=3inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-43
7
Ecode Detail Location Code
E602 0913 00
7-44
Description Ecode Detail Location Code
E602 0923 00
Item
Item
Description
E602
0914
00
E602
0921
00
E602
0922
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=3inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=3inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
0924
00
E602
0925
00
E602
1000
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=3inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=3inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-44
7
Ecode Detail Location Code
E602 1001 00
7-45
Description Ecode Detail Location Code
E602 1005 00
Item
Item
Description
E602
1002
00
E602
1003
00
E602
1004
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy RecoveryinBootpartitionisavailableonlythroughSSTin SafeMode. 1.Setasfollows:CHK-TYPE=4=0;andexecuteHDDCHECK(duration:severaldozenminutes),andthenturn OFFandthenONthepower. 2.Iftheabovemeasuresdonotsolvetheproblem,getin DownloadModetoperformoverallformatusingSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
1010
00
E602
1011
00
E602
1012
00
Title ErrorinHDD Description Error in file system Remedy RecoveryinBootPartitionisavailableonlythroughSSTin SafeMode. 1.StartinSafeModetoperformoverallformatusingSST andreinstallthesystem(System,Lang,RUI),andthenturn OFFandthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-45
7
Ecode Detail Location Code
E602 1013 00
7-46
Description Ecode Detail Location Code
E602 1023 00
Item
Item
Description
E602
1014
00
E602
1021
00
E602
1022
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=4inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=4inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1024
00
E602
1025
00
E602
1100
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=4inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=4inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-46
7
Ecode Detail Location Code
E602 1101 00
7-47
Description Ecode Detail Location Code
E602 1110 00
Item
Item
Description
E602
1102
00
E602
1103
00
E602
1104
00
E602
1105
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=5inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=5inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=5inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1111
00
E602
1112
00
E602
1113
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=5inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=5inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-47
7
Ecode Detail Location Code
E602 1114 00
7-48
Description Ecode Detail Location Code
E602 1125 00
Item
Item
Description
E602
1121
00
E602
1122
00
E602
1123
00
E602
1124
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1200
00
E602
1201
00
E602
1202
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=5inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=5inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-48
7
Ecode Detail Location Code
E602 1203 00
7-49
Description Ecode Detail Location Code
E602 1212 00
Item
Item
Description
E602
1204
00
E602
1205
00
E602
1210
00
E602
1211
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.Ifpossible,askthecustomertoretrievethedatainthe AddressBookfromtheremoteUI. 2.EntertheapplicableCHK-TYPE=6inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes),andthenturnOFFandthenONthepower. 3.Iftheabovemeasurefailedtorecoverthesystem,getin DownloadModetoperformoverallformatusingSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONthemainpowerswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=6inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1213
00
E602
1214
00
E602
1221
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=6inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=6inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-49
7
Ecode Detail Location Code
E602 1222 00
7-50
Description Ecode Detail Location Code
E602 1300 00
Item
Item
Description
E602
1223
00
E602
1224
00
E602
1225
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=6inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=6inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
1301
00
E602
1302
00
E602
1303
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy RecoveryinBootpartitionisavailableonlythroughSSTin SafeMode. 1.Setasfollows:CHK-TYPE=7=0;andexecuteHDDCHECK(duration:severaldozenminutes),andthenturn OFFandthenONthepower. 2.Iftheabovemeasuresdonotsolvetheproblem,getin DownloadModetoperformoverallformatusingSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch.
7-50
7
Ecode Detail Location Code
E602 1304 00
7-51
Description Ecode Detail Location Code
E602 1313 00
Item
Item
Description
E602
1305
00
E602
1310
00
E602
1311
00
E602
1312
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy RecoveryinBootPartitionisavailableonlythroughSSTin SafeMode. 1.StartinSafeModetoperformoverallformatusingSST andreinstallthesystem(System,Lang,RUI),andthenturn OFFandthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1314
00
E602
1321
00
E602
1322
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=7inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=7inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-51
7
Ecode Detail Location Code
E602 1323 00
7-52
Description Ecode Detail Location Code
E602 1401 00
Item
Item
Description
E602
1324
00
E602
1325
00
E602
1400
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=7inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=7inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
1402
00
E602
1403
00
E602
1404
00
E602
1405
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=8inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=8inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=8inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-52
7
Ecode Detail Location Code
E602 1410 00
7-53
Description Ecode Detail Location Code
E602 1414 00
Item
Item
Description
E602
1411
00
E602
1412
00
E602
1413
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=8inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=8inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
1421
00
E602
1422
00
E602
1423
00
E602
1424
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-53
7
Ecode Detail Location Code
E602 1425 00
7-54
Description Ecode Detail Location Code
E602 1503 00
Item
Item
Description
E602
1500
00
E602
1501
00
E602
1502
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=8inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=8inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
1504
00
E602
1505
00
E602
1510
00
E602
1511
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=1inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-54
7
Ecode Detail Location Code
E602 1512 00
7-55
Description Ecode Detail Location Code
E602 1522 00
Item
Item
Description
E602
1513
00
E602
1514
00
E602
1521
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1523
00
E602
1524
00
E602
1525
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=1inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=1inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-55
7
Ecode Detail Location Code
E602 1600 00
7-56
Description Ecode Detail Location Code
E602 1604 00
Item
Item
Description
E602
1601
00
E602
1602
00
E602
1603
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CHECK(duration:severalminutestoseveral dozenminutes);andthenturnOFFandthenONthepower. 2.Iftheabovemeasuresfailedtorecoverthesystem,enter theapplicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONthemainswitch.
E602
1605
00
E602
1610
00
E602
1611
00
E602
1612
00
Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy 1.EntertheapplicableCHK-TYPE=2inthepartitionto executeHDD-CLEAR,andthenturnOFFandthenONthe MainSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-56
7
Ecode Detail Location Code
E602 1613 00
7-57
Description Ecode Detail Location Code
E602 1623 00
Item
Item
Description
E602
1614
00
E602
1621
00
E602
1622
00
Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
1624
00
E602
1625
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=2inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=2inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-57
7
Ecode Detail Location Code
E602 2000 00
7-58
Description Ecode Detail Location Code
E602 4001 00
Item
Item
Description
E602
2001
00
E602
2002
00
E602
4000
00
Title ErrorinHDDEncryptionBoard Description Authenticationerrorbetweenthehostmachineandthe EncryptionBoard. Remedy 1.AftercheckingconnectionoftheEncryptionBoard, disconnectandconnecttheconnectorand,turnOFFand thenONthepower. 2.Executethekeyclearprocedure. *Keyclear:systemrecoveryprocedure 1.ExecutethekeyclearprocedurewithSST. -->Asaresult,thediskbecomesunformatteddisk.Thus,it isnecessarytoexecutestep2. -->E602-0001willbeindicatedifactivatingthemachinewith theunformatteddisk. 2.ExecuteHDDformatandsystemreinstallationwithSST. Title ErrorinHDDEncryptionBoard Description MismatchintheEncryptionBoardoperation. Remedy 1.Executethekeyclearprocedure. Title ErrorinHDDEncryptionBoard Description FailureoftheEncryptionBoard. Remedy 1.AftercheckingconnectionoftheEncryptionBoard, disconnectandconnecttheconnectorand,turnOFFand thenONthepower. 2.Executethekeyclearprocedure. 3.AfterreplacingtheEncryptionBoard,executeHDDformat andsystemreinstallationwithSST. 4.ReplacetheLAN-BARSACBoard-->replacetheMain ControllerPCB1. Title ErrorinHDD Description UnabletomounttheLinuxsystem. Remedy 1.Checkthecableandthepowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
E602
FF00
00
E602
FF01
00
E602
FF02
00
Title ErrorinHDD Description NoLinuxsystemstartscript. Remedy 1.Checkthecableandthepowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
7-58
7
Ecode Detail Location Code
E602 FF03 00
7-59
Description Ecode Detail Location Code
E602 FF12 00
Item
Item
Description
E602
FF04
00
E602
FF05
00
E602
FF10
00
E602
FF11
00
Title ErrorinHDD Description WriteAbort(atstartup) Remedy 1.Setasfollows:CHK-TYPE=3=0;andexecuteHDDCHECK(duration:severaldozenminutes),andthenturn OFFandthenONthepower. 2.Iftheabovemeasuresdonotsolvetheproblem,execute HDD-CLEARwithCHK-TYPE=3=1,2,3,5,andthenturn OFFandthenONthepower. Title ErrorinHDD Description FailureincontactwithHDDorvxWorkssystemerror Remedy 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,startin SafeModetoperformoverallformatusingSSTandreinstall thesystem(System,Lang,RUI),andthenturnOFFand thenONtheMainPowerSwitch. 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description Error in file system Remedy Thisistheerrorwhichusuallydoesnotoccur. 1.ExecuteHDD-CLEARwithCHK-TYPE=3=1,2,3,5,and thenturnOFFandthenONthepower. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
E602
FF13
00
E602
FF14
00
E602
FF21
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=3inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=3inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description FailureinHDDconnection Remedy ThisistheerrorwhichusuallydoesnotoccurinRead/Write level. 1.Checkthecableandpowerconnector. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem.
7-59
7
Ecode Detail Location Code
E602 FF22 00
7-60
Description Ecode Detail Location Code
E604 0000 00
Item
Item
Description
E602
FF23
00
E602
FF24
00
E602
FF25
00
Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description SystemerrororPacketdataerror Remedy It'sduetodatacorruptionorsoftwarebug. 1.StartinSafeModetoperformoverallformatwithSSTand reinstallthesystem(System,Lang,RUI),andthenturnOFF andthenONtheMainPowerSwitch. 2.Iftheabovemeasuresdonotsolvetheproblem,itcanbe causedbyfailurewiththeHDD;therefore,replacetheHDD andreinstallthesystem. Title ErrorinHDD Description WriteAbort Remedy Thedocumentdata(suchasBOXontheHDD)canbe damaged. 1.EntertheapplicableCHK-TYPE=3inthepartitionto performHDD-CHECK(duration:severalminutestoseveral dozensofminutes),andthenturnOFFandthenONthe power. 2.Iftheabovemeasuresdonotsolvetheproblem,enterthe applicableCHK-TYPE=3inthepartitiontoexecuteHDDCLEAR,andthenturnOFFandthenONtheMainPower Switch. (UseSSTtoperformreformat/reinstallationinthecaseof thefollowing:BOOTDEV,BOOTDEV2andAPL_SEND) 3.Iftherestillremainstheproblem,itcanbecausedby failurewiththeHDD;therefore,replacetheHDDand reinstallthesystem.
Title Faulty/insufficient image memory Description Insufficient memory for the model Remedy 1.Addthemainmemory. Title Insufficient memory for MEAP application Description MEAPapplicationisinstalledalthoughMEAPisthebase model. Remedy 1. Change the configuration to make MEAP as Full Model anduninstalltheapplication(downloadingthelicense,etc), andthenmakeitasMEAPBase. 2. Change the configuration to make MEAP as the Full model. Title Overloadofimagememory Description Mountedmemoryexceeds1.5GB Remedy 1.Makethemainmemory1.5GBorless. Title Faulty/insufficient image memory (whenthenecessarysizeisdetermined) Description 512MB memory needs to be mounted (insufficient memory forthemodel) Remedy 1.Mount512MBormoremainmemory.
E604
0001
00
E604
0002
00
E604
0512
00
E604
1024
00
Title
Faulty/insufficient image memory (whenthenecessarysizeisdetermined) Description 1024MB memory needs to be mounted (insufficient memory forthemodel) Remedy 1.Mount1024MBormoremainmemory.
E604
1536
00
Title
Faulty/insufficient image memory (whenthenecessarysizeisdetermined) Description 1536MB memory needs to be mounted (insufficient memory forthemodel) Remedy 1.Mount1536MBormoremainmemory.
E611
0000
00
Title
E612
0001
00
RebootingbecauseSRAMwasdestroyedwhenexecuting transmissionjobthatsecuresdisconnectionofthepower Description BecauseSRAMinformationwasdamagedandthejob informationsavedonSRAMcannotberead(retrieved). Remedy ClearSRAMtoerasethejobthatsecuresdisconnectionof thepower. Title Postponementerror Description Mismatchedchecksumoflicense. Remedy Enterthecorrectlicenseandthenewserialnumber,and thenturnOFFandthenONthepower.
7-60
7
Ecode Detail Location Code
E612 0002 00
7-61
Description Ecode Detail Location Code
E674 0004 00
Item
Item
Description
E612
0003
00
E612
0004
00
E612
0005
00
E613
0512
00
Title Postponementerror Description Differentmodelbetweentheoldmodelcodeandthenew modelcode. Remedy Enterthecorrectlicenseandthenewserialnumber,and thenturnOFFandthenONthepower. Title Postponementerror Description Nodataiswritteninthenewserialnumberarea. Remedy Enterthecorrectlicenseandthenewserialnumber,and thenturnOFFandthenONthepower. Title Postponementerror Description MismatchedserialnumberofthelicensewithSoftID. Remedy Enterthecorrectlicenseandthenewserialnumber,and thenturnOFFandthenONthepower. Title Postponementerror Description Thelicenseiswrittenalthoughthepostponementhasbeen executedonce. Remedy TurnOFFandthenONthepower. Title Faulty/insufficient image memory Description NonecessarymemoryatMainControllerPCB2 Remedy MaketheMemorycapacityatMainControllerPCB2as indicatedby0512. Title Faulty/insufficient image memory Description NonecessarymemoryatMainControllerPCB2 Remedy MaketheMemorycapacityatMainControllerPCB2as indicatedby1024. Title Faulty/insufficient image memory Description NonecessarymemoryatMainControllerPCB2 Remedy MaketheMemorycapacityatMainControllerPCB2as indicatedby1536. Title FailureincommunicationofFAXboard Description Error is detected for specified number of times in communicationwithFAXboard. Remedy Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. 1.CheckconnectionbetweentheFAXboardandtheMain controllerPCB. 2.ReplacetheFaxboard. 3.ReplacetheMaincontrollerPCB.
Title FailureincommunicationofFAXboard Description FailureinaccessofthemodemICwhichisusedwith OnBoardFax Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. 1.CheckconnectionbetweentheFAXboardandtheMain controllerPCB. 2.ReplacetheFaxboard. 3.ReplacetheMaincontrollerPCB. Title FailureincommunicationofFAXboard Description FailureinaccessoftheportICthatisbeusedwith OnBoardFax Remedy Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. 1.CheckconnectionbetweentheFAXboardandtheMain controllerPCB. 2.ReplacetheFaxboard. 3.ReplacetheMaincontrollerPCB. Title FailureincommunicationofFAXboard Description FailureisdetectedinaccessofthemodemICandportIC thatareusedwithOnBoardFax Remedy Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. 1.CheckconnectionbetweentheFAXboardandtheMain controllerPCB. 2.ReplacetheFaxboard. 3.ReplacetheMaincontrollerPCB. Title FailureincommunicationofFAXboard Description Failureinopeningofthetimerdevicetobeusedwith OnBoardFax Remedy Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. ReplacetheMaincontrollerPCB. Remedy
E674
0008
00
E613
1024
00
E674
000C
00
E613
1536
00
E674
0001
00
E674
0010
00
7-61
7
Ecode Detail Location Code
E674 0011 00
7-62
Description Ecode Detail Location Code
E711 0001 05
Item
Item
Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description
Description
ErrorinregisterofIPC(Ctrl) Set4errorswithin1.5secinregisterIPCchip. Checkthecable. ErrorinIPCcommunication When receiving retransmission request for 3 times in a row. ChecktheconnectorconnectedtotheFinisher. ErrorinIPCcommunication WhendetectingCRCerrorattransmission. ChecktheconnectorconnectedtotheFinisher. ErrorinIPCcommunication When not receiving data for more than specified time ChecktheconnectorconnectedtotheFinisher. ErrorinIPCcommunication Whenchecksumofthereceiveddataisnotcorrect. ChecktheconnectorconnectedtotheFinisher. ErrorinUFDIcommunication Neither ACK nor NAK is returned for specified times in a row. ChecktheconnectorconnectedtotheFinisher. ErrorinUFDIcommunication NAK is returned for specified times in a row. ChecktheconnectorconnectedtotheFinisher. ErrorinUFDIcommunication BCC of the received data is invalid for specified times in a row. ChecktheconnectorconnectedtotheFinisher. ErrorinUFDIcommunication Timeout before the completion of reception for specified timesinarow. ChecktheconnectorconnectedtotheFinisher. ErrorinUFDIcommunication Undefined error for specified times in a row at reception. ChecktheconnectorconnectedtotheFinisher. ErrorwhenstartingAssistsystem TheAssistsystem,whichshouldhavebeenconnected beforethepowerwasturnedOFF,isnotconnectedwhen thepoweristurnedON. Checkthecableorcleartheerror. ErrorinIPCwhenAssistsystemisrunning InthecaseofdisconnectionofIPCoranerrorinwhichIPC communicationfailedtoberecovered. Checkthecableorcleartheerror.
E674
0030
00
E677
0001
00
E677
0003
00
E677
0004
00
E677
0010
00
E677
0080
00
E710
0001
05
Title FailureincommunicationofFAXboard Description Failureinstartingofthetimerdevicewhichisusedwith OnBoardFax Remedy Note:"MainControllerPCB"inthesentencerefersto"Main ControllerPCB2"for1-lineFaxBoardor"MainController1" for2-/3-/4-lineFaxBoard. ReplacetheMaincontrollerPCB. Title FailureincommunicationofFAXboard Description ErrorinchecksumofUSB-FAXMAINROM Remedy GetinthedownloadmodefromtheServiceModewhenthe poweristurnedONandexecutedownloadingofUSBFAX MAINROM. Title FailureinPrintServer Description ExhaustFanError(failureisdetectedinoperationofthe exhustfanonPrintServer) Remedy ReplacethePrintServerboard Title FailureinPrintServer Description Error is detected at the configuration check when print serverisstarted. Remedy 1.CheckconnectionofthecableandturnOFFandthenON thepower. 2.ReinstallthePrintServer Title FailureinPrintServer Description CPUFanError(failureisdetectedinoperationoftheexhust fanonPrintServer) Remedy ReplacethePrintServerboard Title FailureinPrintServer Description FailurewasdetectedinoperationoftheCPUfanontheprint server. Remedy 1.Replacetheboardoftheprintserver. 2.ReinstallthePrintServer Title FailureinPrintServer Description Anerroroccurredinnetworkcommunicationwiththeengine whilethejobisexecutedfromtheprintserver. Remedy 1.CheckthecableconnectionandturnOFFandthenON thepower. 2.Reenterthejob. 3.Reinstalltheprintserver. Title ErrorininitializationofIPC(Ctrl) Description Failedtobeatreadystatuswithin3secafterIPCchiphas beenstarted. Remedy Checkthecable.
E713
0001
05
E713
0002
05
E713
0004
05
E713
0008
05
E713
0010
05
E713
0011
05
E713
0020
05
E713
0021
05
E713
0022
05
E717
0001
00
E717
0002
00
7-62
7
Ecode Detail Location Code
E719 0001 00
7-63
Description Ecode Detail Location Code
E730 1001 00
Item
Item
Description
E719
0002
00
E719
0003
00
E719
0011
00
E719
0012
00
E719
0031
00
E719
0032
00
Title ErrorinCoinVendor. Description ErrorinstartingoftheCoinVendor -TheCoinVendor,whichshouldhavebeenconnected beforethepowerwasturnedOFF,isnotconnectedwhen thepoweristurnedON. Remedy Checkthecableorcleartheerror. Title ErrorinCoinVendor. Description ErrorinIPCwhenCoinVendorisrunning. -InthecaseofdisconnectionofIPCoranerrorinwhich IPCcommunicationfailedtoberecovered. -Whendisconnectionofthepickupdeliverysignalis detected. -Whenillegalconnectionisdetected(short-circuitwithTx andRxofIPC) Remedy Checkthecableorcleartheerror. Title ErrorinCoinVendor. Description -Inthecaseofcommunicationerrorwiththecoinvendor whileobtainingtheunitpriceatstart-up. Remedy Checkthecableorcleartheerror. Title ErrorinCoinVendor. Description ErrorinstartingofNewCardReader -NewCardReader,whichshouldhavebeenconnected beforethepowerwasturnedOFF,isnotconnectedwhen thepoweristurnedON. Remedy Checkthecableorcleartheerror. Title ErrorinCoinVendor. Description ErrorinIPCwhenNewCardReaderisrunning. -InthecaseofdisconnectionofIPCoranerrorinwhich IPCcommunicationfailedtoberecovered. Remedy Checkthecableorcleartheerror. Title ErrorinserialcommunicationatthestartoftheNewCard Reader Description FailureincommunicationwiththeserialNewCardReader atstart-up. Remedy -CheckifthecableoftheserialNewCardReaderis disconnected. -TakeouttheserialNewCardReader. -COPIER>Function>CLEAR>CARD -COPIER>Function>CLEAR>ERR Title ErrorinserialcommunicationatthestartoftheNewCard Reader Description Communicationfailedinthemiddleoftheoperation althoughcommunicationwiththeserialNewCardReader wassuccessfulatstart-up. Remedy -CheckifthecableoftheserialNewCardReaderis disconnected.
E730
100A
00
E730
A006
00
E730
A007
00
E730
B013
00
E730
C000
00
E730
C001
00
E731
3000
00
Title ErrorinPDLsoftware Description Initializationerror. Remedy 1.ExecutethePDLresetprocess. 2.TurnOFFandthenONthepower. Title ErrorinPDLsoftware Description Fatalsystemerroroccurs. Remedy 1.ExecutethePDLresetprocess. 2.TurnOFFandthenONthepower. Title ErrorinPDLcommunication Description PDLfailstorespond.NoresponsefromPDLdueto Subbootablefailure,notinstalled,RIPAfailure,etc. Remedy 1.ExecutethePDLresetprocess. 2.TurnOFFandthenONthepower. 3.ChecktheconnectionofMainControllerPCB2. 4. Reinstall the firmware. 5.ReplacetheMainControllerPCB1. Title MismatchinPDLversion Description Mismatchofversionbetweenthecontrolsoftwareofthe hostmachineandPDLcontrolsoftware. Remedy Executeoverallsystemformatandinstallation. Title ErrorinPDLembeddedfont Description Fontdataiscorrupted. Remedy 1.TurnOFFandthenONthepower. 2.Reinstallthesystem. 3.Executeoverallsystemformatandinstallation. Title Errorininitialization Description An error, such as memory acquisition failure, occurs at initialization. Remedy Executeoverallsystemformatandinstallation. ReplacetheMainControllerPCB1. Title ErrorinHDDaccess Description AnerroroccursatHDDaccess. Remedy Executeoverallsystemformatandinstallation. ReplacetheHDD. ReplacetheMainControllerPCB2. ReplacetheMainControllerPCB1. Title ErrorinMainControllerPCB2 Description UnabletorecognizetheSURFBoard. Remedy 1.ChecktheconnectionoftheMainControllerPCB2. 2.ReplacetheMainControllerPCB2. 3.ReplacetheMainControllerPCB1.
7-63
7
Ecode Detail Location Code
E731 3001 00
7-64
Description Ecode Detail Location Code
E743 0000 00
Item
Item
Description
E731
3002
00
E731
3015
00
E732
0001
00
E732
9999
00
E733
0000
00
E733
0001
00
E740
0002
00
E740
0003
00
Title ErrorinMainControllerPCB2 Description FailureofSURFinitialization. Remedy 1.ChecktheconnectionoftheMainControllerPCB2. 2.ReplacetheMainControllerPCB2. 3.ReplacetheMainControllerPCB1. Title ErrorinMainControllerPCB2 Description FailureofSURFinitialization. Remedy 1.ChecktheconnectionoftheMainControllerPCB2. 2.ReplacetheMainControllerPCB2. 3.ReplacetheMainControllerPCB1. Title ErrorinMainControllerPCB2 Description VideodataisnottransmittedtoCL1-Geventhoughthereis noprobleminthesoftware. Remedy 1.TurnOFFandthenONthepower. 2.ReplacetheMainControllerPCB2. 3.ReplacetheMainControllerPCB1. Title Errorinscannercommunication Description ErrorinDDI-Scommunication Remedy 1.ChecktheconnectorconnectingtotheScanner. 2.CheckthepoweroftheScanner->whethertoperform initializationatstart-up? 3.ReplacetheRcon,theScannerBoardortheMain controllerPCB2. Title Errorinscannercommunication Description When a Scanner is detected for the first time from the Printer Model(notanerror). Remedy 1.TurnOFFandthenONthepower. Title Errorinprintercommunication Description Communicationwiththeprinterfailedatstart-up. Remedy 1.ChecktheconnectorconnectingtothePrinter. 2.CheckthepowerofthePrinter->whethertoperform initializationatstart-up? 3.ReplacetheDconortheMaincontrollerPCB2. Title Errorinprintercommunication Description ErrorinDDI-Pcommunication Remedy 1.ChecktheconnectorconnectingtothePrinter. 2.CheckthepowerofthePrinter->whethertoperform initializationatstart-up? 3.ReplacetheDconortheMainControllerPCB2. Title FailureinEthernetBoard Description IncorrectMACaddress Remedy 1ReplacetheLANcard. Title FailureinEthernetBoard Description IncorrectMACaddress Remedy 1ReplacetheLANcard.
E743
0003
00
E743
0004
00
E744
0001
00
Title DDIcommunicationerror Description SCIerroroccurrence,receptiondataNG,receptiontimeout, SEQtimeouterror Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionoftheCablebetweenReaderand Controller. 3.Checkthevoltage(+24Vand+12V)ontheReader ControllerPCB. 4.ReplacetheDDI-SCable. 5.ReplacetheReaderControllerPCB. 6.ReplacetheMainControllerPCB2. Title DDIcommunicationerror Description SCIerroroccurrence,receptiondataNG,receptiontimeout, SEQtimeouterror Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionoftheCablebetweenReaderand Controller. 3.Checkthevoltage(+24Vand+12V)ontheReader ControllerPCB. 4.ReplacetheDDI-SCable. 5.ReplacetheReaderControllerPCB. 6.ReplacetheMainControllerPCB2. Title DDIcommunicationerror Description SCIerroroccurrence,receptiondataNG,receptiontimeout, SEQtimeouterror Remedy 1.TurnOFFandthenONthepower. 2.ChecktheconnectionoftheCablebetweenReaderand Controller. 3.Checkthevoltage(+24Vand+12V)ontheReader ControllerPCB. 4.ReplacetheDDI-SCable. 5.ReplacetheReaderControllerPCB. 6.ReplacetheMainControllerPCB2. Title Failure in language file Description MismatchedversionbetweentheHDDandtheBootable Remedy Reinstall the correct language file or reinstall the entire software. Title Failure in language file Description Oversized language file in HDD Remedy FormattheHDDandreinstallthesoftwarebecausethere can be more than necessary language files. Title Failure in language file Description Unable to find the language which should be switched and described in Config.txt in the HDD. Remedy Reinstallthesoftware.
E744
0002
00
E744
0003
00
7-64
7
Ecode Detail Location Code
E744 0004 00
7-65
Description Ecode Detail Location Code
E746 0033 00
Item
Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy
Item
Description
E744
1000
00
E744
2000
00
E746
0011
00
E746
0021
00
E746
0022
00
E746
0023
00
E746
0024
00
E746
0031
00
E746
0032
00
Failure in language file UnabletoswitchtothelanguageintheHDD. Reinstallthesoftware. ErrorinBootROMproject TheinsertedBootROMisofdifferentmodel. 1.ReplacewiththecorrectBootROM. ErrorinengineIDofSoftID TheengineIDdescribedinSoftIDisincorrect 1.ReplacetheSoftIDPCB ErrorinengineIDofSoftID Becauseboththevoicecompositionboardandthe compositionrecognitionboardareinserted. Insertonly1boardoftheappropriatevoiceboard. ErrorinengineIDofSoftID Failureinself-checkingoftheoptionboard. 1.ReplacetheOptionBoard. 2.Asatemporarymeasure,removetheOptionBoardand disablethePCAMlicense. ErrorinengineIDofSoftID DifferentversionoftheOptionBoard 1. Update the firmware of the Option Board. 2.Asatemporarymeasure,removetheOptionBoardand disablethePCAMlicense. ErrorinengineIDofSoftID NoresponsefromtheOptionBoard 1.ChecktoseeiftheOptionBoardisproperlyinserted. 2.TurnOFFandthenONthepower. 3.Iftheabovemeasuredoesnotsolvetheproblem,replace theOptionBoard. 4.Asatemporarymeasure,removetheOptionBoardand disablethePCAMlicense. ErrorinengineIDofSoftID FailureinbehavioroftheOptionBoard. 1.TurnOFFandthenONthepower. 2.Iftheabovemeasuredoesnotsolvetheproblem,replace theOptionBoard. 3.Asatemporarymeasure,removetheOptionBoardand disablethePCAMlicense. ErrorinengineIDofSoftID Errorinhardware ReplacetheOptionBoard. ErrorinengineIDofSoftID Errorthatcannotberecovered ReinstallationisnecessaryusingSST
E746
0034
00
E747
3F00
00
E747
7F00
00
E747
9F00
00
E747
BF00
00
E747
DF00 00
E747
FF00
00
E747
FF01
00
E747
XXXX 00
Title ErrorinengineIDofSoftID Description Errorthatcanberecovered Remedy Recoveryisavailableifthereisabackupkeydueto mismatchofinternaldata Title ErrorinengineIDofSoftID Description Errorthatisautomaticallyrecovered Remedy Tobeautomaticallyrecoveredatthenextstart-up Title UndetectederroroftheImageProcessChipP Description UndetectederroroftheImageProcessChipP Remedy ReplacetheMainControllerPCB2 Title UndetectederroroftheImageProcessChipR Description UndetectederroroftheImageProcessChipR Remedy ReplacetheMainControllerPCB2 Title DetectionshowsthatSubBoardOfailedtobeinstalled Description DetectionshowsthatSubBoardOfailedtobeinstalled Remedy CheckcontactoftheSubBoardOandthecable,orreplace ->ReplacetheMainControllerPCB2 Title DetectionshowsthatSubBoardOfailedtobeinstalled Description DetectionshowsthatSubBoardOfailedtobeinstalled Remedy CheckcontactoftheSubBoardOandthecable,orreplace ->ReplacetheMainControllerPCB2 Title UndetectederrorofImageProcessChipS Description UndetectederrorofImageProcessChipS Remedy CheckcontactofScanI/Fcable-->Replace ->ReplacetheMainControllerPCB2 Title AwrongSubBoardwasdetected Description AwrongSubBoardwasdetected Remedy CheckcontactofScanI/Fcable-->Replace CheckcontactoftheSubBoardOandthecable-->Replace ReplacetheMainControllerPCB2 Title ConnectionfailurewithDDR-SDRAM(P)/inappropriate memorysize Description ConnectionfailurewithDDR-SDRAM(P)/inappropriate memorysize Remedy ReplacetheDDR-SDRAM(P) Title ErrorinMainControllerPCB2 Description ErrorinMainControllerPCB2 Remedy 1.CheckcontactofSDRAMatMainControllerPCB2.--> Replace 2.ReplacetheMainControllerPCB2 3.ReplacetheHDD(replacethenewencryptionboard) CheckcontactofScanI/Fcable-->Replace CheckcontactoftheSubBoardOandthecable,orreplace
7-65
7
Ecode Detail Location Code
E748 2010 00
7-66
Description Ecode Detail Location Code
E749 0004 00
Item
Title Description Remedy Title Description Remedy Title Description Remedy Title Description Remedy
Item
Description
E748
2011
00
E748
2012
00
E748
2021
00
E748
2022
00
E748
2023
00
E748
2024
00
E749
0001
00
E749
0003
00
ErrorinFlashPCB Unable to find the IPL. ReplacetheFlashPCB. ErrorinFlashPCB Unable to find the kernel. ReplacetheFlashPCB. ErrorinFlashPCB UnabletomounttheLinuxsystematstartingservicemode, orthereisnosystemstartscript. ReplacetheFlashPCB. ErrorinaccessofMainControllerPCB2 NecessaryH/WontheMainControllerPCB2isnotfound. 1.CleantheterminaloftheMainControllerPCB2,and disconnectandthenconnectit. 2.CleantheterminaloftheMainControllerPCB1,and disconnectandthenconnectit. 3.ReplacetheMainControllerPCB2. ErrorinaccessofMainControllerPCB2 NecessaryH/WontheMainControllerPCB2isnotfound. 1.RemoveandtheninserttheMainControllerPCB1and theMainControllerPCB2. 2.ReplacetheMainControllerPCB1andtheMain ControllerPCB2. ErrorinaccessofMainControllerPCB2 UnabletoinitializethememoryDDR2-SDRAMontheMain ControllerPCB2. 1.CleantheterminaloftheDDR2-SDRAM,anddisconnect andthenconnectit. 2.ReplacetheDDR2-SDRAM. ErrorinaccessofMainControllerPCB2 CPUontheMainControllerPCB2failstocompletethe initialization. 1.CleantheterminaloftheDDR2-SDRAM,anddisconnect andthenconnectit. 2.ReplacetheDDR2-SDRAM. Reboot command due to change in PDL configuration There has been a change in configuration that needs to turn OFFandthenONthepower. TurnOFFandthenONthepower. Boot command due to change in mAccele configuration There has been a change in configuration that needs to turn OFFandthenONthepower. TurnOFFandthenONthepower.
E804
0001
00
E805
0000
05
E805
0001
05
E806
0000
05
Title BootcommandduetoE-coderecovery Description There has been a change in configuration that needs to turn OFFandthenONthepower. Remedy TurnOFFandthenONthepower. Title ErrorinPowerSupplyFan Description LockofthePowerSupplyFanwasdetected Remedy 1.CheckpowerdistributiontotheFan. 2.ReplacetheFan. Title ErrorinFixingHeatExhaustFan1 Description 1.AfterthepoweroftheHostMachinehasbeenturned ON,rotationoftheFixingHeatExhaustFan1(FM1)was detectedbeforeturningONthefan. 2.ThereisnorotationsignalwhiletheFixingHeatExhaust Fan1(FM1)isrotating. Remedy 1.ChecktheFixingHeatExhaustFan1(FM1)harness (toseeiftheharnessiscaught,disconnectedorphysically removed). 2.CheckthefuseofthePickupFeedDriverPCB(UN2). 3.ReplacethePickupFeedDriverPCB(UN2). 4.ReplacetheFixingHeatExhaustFan1(FM1). Title ErrorinFixingHeatExhaustFan2 Description 1.AfterthepoweroftheHostMachinehasbeenturned ON,rotationoftheFixingHeatExhaustFan2(FM2)was detectedbeforeturningONthefan. 2.ThereisnorotationsignalwhiletheFixingHeatExhaust Fan2(FM2)isrotating. Remedy 1.ChecktheFixingHeatExhaustFan2(FM2)harness (toseeiftheharnessiscaught,disconnectedorphysically removed). 2.ReplacetheFeedDriverPCB. 3.ReplacetheFixingHeatExhaustFan2(FM2). Title ErrorinDeliveryfan1 Description 1.FailureintheConnectsignalwhenthefanwasturned OFF. 2.Failuredetectedwhilethefanisrotating. Remedy 1.Checkthefanharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 2.ReplacethePickupFeedDriverPCB(UN2). 3.ReplacetheDeliveryFan(FM7).
7-66
7
Ecode Detail Location Code
E806 0001 05
7-67
Description Ecode Detail Location Code
E811 0001 05
Item
Item
Description
E806
0002
05
E807
0000
05
E807
0001
05
E808
0000
05
E811
0000
05
Title ErrorinDeliveryfan2 Description 1.AfterthepoweroftheHostMachinehasbeenturnedON, rotationofthefanwasdetectedbeforeturningONthefan. 2.Thereisnorotationsignalwhilethefanisrotating. Remedy 1.Checkthefanharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 2.ReplacethePickupFeedDriverPCB(UN2). 3.ReplacetheDeliveryFan2(FM9). Title ErrorinSecondaryTransferExhaustFan Description 1.AfterthepoweroftheHostMachinehasbeenturnedON, rotationofthefanwasdetectedbeforeturningONthefan. 2.Thereisnorotationsignalwhilethefanisrotating. Remedy 1.Checkthefanharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 2.ReplacethePickupFeedDriverPCB(UN2). 3.ReplacetheSecondaryTransferExhaustFan(FM8). Title ErrorinProcesscartridgefan(front) Description 1.AfterthepoweroftheHostMachinehasbeenturnedON, rotationofthefanwasdetectedbeforeturningONthefan. 2.Thereisnorotationsignalwhilethefanisrotating. Remedy 1.Checkthefanharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 2.ReplacetheRelayBoard. 3.Replacethefan. Title ErrorinProcesscartridgefan(rear) Description 1.AfterthepoweroftheHostMachinehasbeenturnedON, rotationofthefanwasdetectedbeforeturningONthefan. 2.Thereisnorotationsignalwhilethefanisrotating. Remedy 1.Checkthefanharness(toseeiftheharnessiscaught, disconnectedorphysicallyremoved). 2.ReplacethePickupFeedDriverPCB(UN2). 3.Replacethefan. Title ErrorinZeroCross Description ZeroCrossfailedtobedetectedfor50msormorewhilethe fixing relay was ON. Remedy 1.ReplacetheACDriver(UN6). 2.Checkthecycleoftheinputvoltage(failureinpowerperipheralareaofthecustomer.Askthecustomertoperform thepowersupplywork). Title FusecutofferrorinProcessCartridge Description Fusecannotbecutoff(disconnect)althoughitistriedtobe cutoff. Remedy 1.TurnOFFandthenONthepower. 2.ChecktheresistancevalueoftheFuseonDrum. 3.ReplacetheDrum.
E840
0000
05
E880
0001
00
E880
0003
00
E880
0004
00
E880
0005
00
Title Errorin24Vofthedrumnew/olddetection. Description Errorin24Vofthedrumnew/olddetection. Remedy 1.ChecktheFUSE_5onthePickupFeedDriverPCB(UN2). 2.ReplacethePickupFeedDriverPCB(UN2). Title ErrorinshutterforFixingEdgeCoolingFan(iftheHPfailed tobedetectedwhentheerroroccurred). Description Failedtodetectthatthefanshutterhasmovedtothe specified position when moving the fan shutter from anywhereotherthantheHP. Remedy 1.ChecktheharnessoftheShutterMotor(M27),theShutter HPSensor(PS31)andtheShutterPositionSensor(PS32) (toseeiftheharnessiscaught,disconnectedorphysically removed). 2.ReplacethePickupFeedDriverPCB(UN2). 3.ReplacetheShutterMotor,theShutterHPSensororthe ShutterPositionSensor. Title ErrorinControllerFan Description FanlockoftheControllerCPUcoolingfanwasdetected Remedy Checkiftheconnectorisconnected. IftheconnectionwasfoundOK,replacetheControllerFan 3(FM13). Title ErrorinControllerFan Description RiserPCBFanwasdetectedtobelocked. Remedy Checkiftheconnectorisconnected. IftheconnectionwasfoundOK,replacetheControllerFan 1(FM11). Title ErrorinControllerFan Description RiserPCBFanwasdetectedtobelocked. Remedy Checkiftheconnectorisconnected. IftheconnectionwasfoundOK,replacetheControllerFan 2(FM12). Title ErrorinControllerFan Description FanlockoftheHDDCoolingFanwasdetected Remedy Checkiftheconnectorisconnected. IttheconnectionisOK,replacetheHDDCoolingFan (FM14).
T-7-2
7-67
7
JamCode
7-68
ACC ID
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jam Code
0DA1 0DA2 0B00 0105 0205 0A05 0106 0206 0A06 0107 0207 0A07 010D 020D 0A0D 010A 020A 0A0A 010C 020C 0A0C 0108 0208 0A08 0109 0209 0A09 010B 020B 0A0B 0A01 0102 0202 0A02 010F 0111 0112 020F 0211 0212 0A0F 0A11 0A12
Type
MISSPRT MISSPRT DOOROP DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON DELAY STNRY POWERON POWERON DELAY STNRY POWERON DELAY DELAY DELAY STNRY STNRY STNRY POWERON POWERON POWERON
SensorName
Frontdoorsensor,Rightlowerdoor sensor,Rightdoorsensor Registrationsensor Registrationsensor Registrationsensor Fixinginletsensor Fixinginletsensor Fixinginletsensor Innerdeliverysensor Innerdeliverysensor Innerdeliverysensor Duplexpapersensor Duplexpapersensor Duplexpapersensor Reversesensor Reversesensor Reversesensor Duplexinletsensor Duplexinletsensor Duplexinletsensor Firstdeliverysensor Firstdeliverysensor Firstdeliverysensor Seconddeliverysensor Seconddeliverysensor Seconddeliverysensor Thirddeliverysensor Thirddeliverysensor Thirddeliverysensor Cassette1pre-registrationsensor Cassette2pre-registrationsensor Cassette2pre-registrationsensor Cassette2pre-registrationsensor Deckpickupsensor TonercontainercamHPsensor(Bk) Tonercappositionsensor(Y) Deckpickupsensor TonercontainercamHPsensor(Bk) Tonercappositionsensor(Y) Deckpickupsensor Tonersupplysensor(Y) Tonersupplysensor(M)
SensorID
MISSPRT MISSPRT PS18,PS19,PS20 PS33 PS33 PS33 PS34 PS34 PS34 PS37 PS37 PS37 PS38 PS38 PS38 PS39 PS39 PS39 PS40 PS40 PS40 PS41 PS41 PS41 PS42 PS42 PS42 PS43 PS43 PS43 PS55 PS56 PS56 PS56 PS6D PS8 PS9 PS6D PS8 PS9 PS6D PS1 PS2
imageRUNNERADVANCEC5051/C5045/C5035/ C5030
[PS39] [PS42] [PS40] [PS43]
[PS41] [PS37] [PS34] [PS35] [PS36] [PS38] [PS33] [UN53] [PS47] [PS55] [PS56]
F-7-1
[PS1D] [PS6D]
F-7-2
7-68
7
ACC ID
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7-69
SensorID
PS8 PS8 PS8 PS9 PS9 PS9
Jam Code
0103 0203 0A03 0104 0204 0A04 0CA6 0CF1 0DA3 1F01 FFA1 FFA2 FFA3 0D91 0D92 0D93 0113 0213
Type
DELAY STNRY POWERON DELAY STNRY POWERON RETRYERR ERR MISSPRT SEQNG SEQNG SEQNG SEQNG SIZENG OHPNG OHPNG DELAY STNRY
SensorName
TonercontainercamHPsensor(Bk) TonercontainercamHPsensor(Bk) TonercontainercamHPsensor(Bk) Tonercappositionsensor(Y) Tonercappositionsensor(Y) Tonercappositionsensor(Y) Transparencysensor Transparencysensor Verticalpathsensor Verticalpathsensor
DuplexColorImageReaderUnit-B1/ColorImage ReaderUnit-B2
[SR22] [PCB2] [SR2] [SR4] [SR3] [PCB5]
[VR1]
[SR10]
F-7-3
ACC ID
01 01 01 01 01 01 01 01 01 01
Jam Code
0090 0091 0092 0093 0094 0005 0045 0006 0046 0007
Type
ADFOP ADFOP COVEROP COVEROP RESIDUAL DELAY DELAY STNRY STNRY DELAY
SensorName
Registrationsensor Registrationsensor Registrationsensor Registrationsensor Readsensor1
7-69
7
ACC ID
01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
7-70
SensorID C5051,C5045/ C5035,C5030
PCB4/SR2 PCB4/SR2 PCB4/SR2 PCB5/SR3 PCB5/SR3 PCB5/SR3 PCB5/SR3 SR12/SR15/SR11 SR16/SR2,SR3,PCB2/SR2,SR3,PCB2/SR2,SR3,PCB2/SR2,SR3,PCB2/-/SR3 -/SR3 -/SR3 -/SR3 SR4/SR4 SR4/SR4 SR4/SR4 SR4/SR4 SR5/- SR5/SR5/SR5/TIMINGNG
T-7-4
Jam Code
0047 0008 0048 0011 0051 0012 0052 0075 0073 0074 0001 0095 0002 0042 0013 0053 0014 0054 0003 0043 0004 0044 0009 0049 0010 0050 0071
Type
DELAY STNRY STNRY DELAY DELAY STNRY STNRY HPNG HPNG HPNG DELAY PICKUPNG STNRY STNRY DELAY DELAY STNRY STNRY DELAY DELAY STNRY STNRY DELAY DELAY STNRY STNRY TIMINGNG
SensorName
Readsensor1 Readsensor1 Readsensor1 Deliverysensor Deliverysensor Deliverysensor Deliverysensor Pickupunitlifterhomepositionsensor Disengaginghomepositionsensor1 Disengaginghomepositionsensor2 Post-separationsensor1,Post-separation sensor2,Post-separationsensor3 Post-separationsensor1,Post-separation sensor2,Post-separationsensor3 Post-separationsensor1,Post-separation sensor2,Post-separationsensor3 Post-separationsensor1,Post-separation sensor2,Post-separationsensor3 Reversingpathsensor Reversingpathsensor Reversingpathsensor Reversingpathsensor Delaysensor Delaysensor Delaysensor Delaysensor Readsensor2 Readsensor2 Readsensor2 Readsensor2 -
StapleFinisher-C1/BookletFinisher-C1
PI109 PI111 PI106 PI114 PI104 PI102 PI116 PI113 PI110 PI103 PI108 PI123 PI105 PI107 PI101 PI117
7-70
7-71
ACC ID
02 02 02 02 02 02 02 02
Jam Code
1F2F 1F8F 1012 1408 1488 1122 1092 1387
Type
RETRYERR RETRYERR DELAY DOOROP DOOROP STNRY DELAY POWERON
SensorName
Paperpushingplatemotorclock sensor Paperpushingplatemotorclock sensor,Verticalpatpapersensor,No.1 papersensor,No.2papersensor,No.3 papersensor,Saddleinletsensor Inletsensor Inletsensor Inletsensor Feedpathsensor Feedpathsensor Feedpathsensor #N/A! No.1papersensor No.1papersensor,No.2paper sensor,No.3papersensor Saddleinletsensor Saddleinletsensor SideregistrationHPsensor GripperunitHPsensor
SensorID
DELAY DOOROP DOOROP PCB12 PI1 PI1,PI17,PI18,PI19 ,PI20,PI22
PI22 PI18 PI19 PI20 PI21 PI6 PI5 PI14 PI15 PI12 PI17 PI4 PI13 PI1 PI7 PI8
F-7-5
PI16
PI9
PI11
02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
1011 1121 1205 1014 1124 1307 11A2 1091 11A1 1093 11A3 1644 1345 1586 1506 1C75
DELAY STNRY RESIDUAL DELAY STNRY POWERON STNRY DELAY STNRY DELAY STNRY PUNCH POWERON SDLSTP STP ERR
PI103 PI103 PI103 PI104 PI104 PI104 PI11,PI17 PI18 PI18,PI19,PI20 PI22 PI22 PI63 POWERON SDLSTP STP S7
T-7-5
7-71
7
InnerFinisher-A1
S22
7-72
ACC ID Jam Code
1C71 1C20 1C67 1C32 1C6F 1C40 1C42 1CF3 1CF6 1CF1 1CF7 1001 1101 1102 1300 1F00 1500 1400
Type
ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR ERR DELAY STNRY STNRY POWERON STP DOOROP
SensorName
Gripuarmsensor ShiftrollerHPsensor Shiftrollerreleasesensor staplermoveHPsensor Entrancerollerrelease/stopperHPsensor stacktrayclocksensor Additionaltrayclocksensor Entrancesensor Entrancesensor Processingtraysensor Entrancesensor,Processingtraysensor Entrancesensor StaplerHPsensor,Stapleredgingsensor Frontcoverswitch
SensorID
S13 S2 S3 S10 S5 S14 S23 S1 S1 S6 S1,S6 S1 S18,S19 SW1
T-7-6
S2
S1
02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
S15
S6
F-7-6
S10 S7
F-7-7
7-72
7
AlarmCode
AlarmCode
Location Alarm ofTrouble Code
00 00 02
7-73
Location Alarm ofTrouble Code
34
Description
Details
Description
Details
SoftcounterPCBcannotwritenormally. SoftcounterPCBcannotrestoredata.
- 0246 Errorcodedisplay (4-digit) - 0247 Errorcodedisplay (4-digit) - 0020 FrontfaceDADFdust correctionoccurs - 0021
34
02
02
- 0022
02
- 0023
04 09 09 09 09 10 10 10 10 11 31
33
- 0011
SET:Incasethat'DADFdustcorrectionwiththe frontfacerollerduringDADFpaperinterval"is enabled. ReversefaceDADFdust SET:Incasethat'DADFdustcorrectionwiththe correctionoccurs reversefacerollerduringDADFpaperinterval"is enabled. Insufficient LED light In case the light intensity is insufficient when LED intensityerrorinfront lighting scanner Insufficient LED light In case the light intensity is insufficient when LED intensityerrorinback lighting scanner Optionaldeckliftererror Drumlife(Y) Drumlife(M) Drumlife(C) Drumlife(K) Notoner(Bk)(RDS creates) Notoner(Cy)(RDS creates) Notoner(M)(RDS creates) Notoner(Ye)(RDS creates) Wastetoneralarm Detectedwastetonerbottlefull. HDDfailurewhen HDD failure when equipped with the mirroring equipped with the function mirroringfunction Fixingexhaustfanalarm SET:Incasethefanabnormalityoccurredduringa job. RESET:Incasethefanoperatesnormallyduringa job
37 37 37 37 37 37 37 37 37 38 38 61
62
65
70 70 70 70
Abnormal data occurred on more or equal to 8 out of 10setsofautoregistrationpattern. Dirtonthebeltandscratcheswerewronglydetected asapatternanddiscrepancyinreadingdata occurredastheresult. - 0003 Autoregistration Timeoutoccurredduetounsuccessinreading10 adjustment setsofautoregistrationpattern. Registrationdetectionsensorfailure,Registration detectionsensorcleaningmembercoveredthe registrationdetectionsensor,ornoimagedrewon thebelt. - 0001 ForR&D ForR&D - 0002 ForR&D ForR&D - 0003 ForR&D ForR&D - 0004 ForR&D ForR&D - 0005 ForR&D ForR&D - 0006 ForR&D ForR&D - 0007 ForR&D ForR&D - 1000 ForR&D ForR&D - 2000 ForR&D ForR&D - 0001 ForR&D ForR&D - 0002 ForR&D ForR&D - 0001 Nostaple Operation:Usermessageisdisplayedoncontroller (processtrayassembly) ofmainunit. Printingoperationissuspendedwhenoperating staplejobduringaprintjob. Recoverymethod:Replenishwithstaples. - 0001 Nostaple Operation:Printoperationissuspendedafteruser (saddleassembly) messageisdisplayedoncontrollerofmainunit. Printingoperationissuspendedwhenoperating side-staplejobduringaprintjob. Recoverymethod:Replenishwithstaples. - 0001 Punchdustfull Operation:Usermessageisdisplayedoncontroller ofmainunit. Whenpunchingduringaprintjob,operationvaries dependingonthedetectionlevelofthepunchdust sensor. Punchdustdetectionlevel1:Continueoperation. Punchdustdetectionlevel2:Suspendprinting(in casepunchingoperated1000timesafterthelevel1 detection) Recoverymethod:Removepunchdust. - 0001 Memory overflow - 0002 Font memory overflow - 0003 Micromemory overflow - 0004 Image memory overflow -
7-73
7
Location Alarm ofTrouble Code
70 70 70
7-74
Details Location Alarm ofTrouble Code
75
Description
-
Description
-
Details
73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 75 75
- 0005 Patternmemory overflow - 0006 Aharddiskerror - 0007 Detectoperation abnormalityfortheHDD access request - 0004 LIPS - 0006 LIPS - 0007 LIPS - 0008 LIPS - 0009 LIPS - 0010 LIPS - 0011 LIPS - 0012 LIPS - 0013 LIPS - 0014 LIPS - 0015 LIPS - 0016 LIPS - 0017 LIPS - 0018 LIPS - 0019 LIPS - 0020 LIPS - 0021 LIPS - 0022 LIPS - 0023 LIPS - 0024 LIPS - 0025 LIPS -
75
75 75 75
75 75
Overflow of work memory for translator Error in configuration acquisition/management MemorymanagementerrorinLIPS FilemanagementerrorinLIPS Receptiondatamanagementerror Pagecontrolerror Macromanagementerror Colormanagementerror Layoutcontrolerror Fontmanagementerror Letterdrawingerror Graphicdrawingerror Imagedrawingerror DisplayerrortoLCD Textmodecommanderrorlayererror Vectormodecommanderrorlayererror Utilityexecutioncontrolerror DatabasemanagementerrorinLIPS MenucontrolerrorinLIPS BooterrorinLIPS Whenthegraphiclibraryisinuseforimage processing,ifthememoryallocationisfailed. 0026 LIPS Dataformaterrorofimagemode 0001 ErroroccurredinYukon 0002 Erroroccurreddueto invalidSVGanalysis fromYukon 9101 Videotransfererror (CLG-O1Overrunerror) 9102 Videotransfererror (CLG-O1VsyncBerror) 9103 Videotransfererror (CLG-O1VsyncB, Overrunerror) 9104 Videotransfererror (CLG-O1VsyncAerror) 9105 Videotransfererror (CLG-O1VsyncA, Overrunerror)
75 75
75
75
75
75
75
75
75 75
75
75
75
- 9106 Videotransfererror (CLG-O1VsyncA, VsyncBerror) - 9107 Videotransfererror (CLG-O1VsyncA, VsyncB,Overrunerror) - 9108 Videotransfererror (CLG-O1HsyncBerror) - 9109 Videotransfererror (CLG-O1HsyncB, Overrunerror) - 910A Videotransfererror (CLG-O1HsyncB, VsyncBerror) - 910B Videotransfererror (CLG-O1HsyncB, VsyncB,Overrunerror) - 910C Videotransfererror (CLG-O1HsyncB, VsyncAerror) - 910D Videotransfererror (CLG-O1HsyncB, VsyncA,Overunerror) - 910E Videotransfererror (CLG-O1HsyncB, VsyncA,VsyncBerror) - 910F Videotransfererror (CLG-O1HsyncB, VsyncA,VsyncB ,Overunerror) - 9110 Videotransfererror (CLG-O1HsyncAerror) - 9111 Videotransfererror (CLG-O1HsyncA, Overrunerror) - 9112 Videotransfererror (CLG-O1HsyncA, VsyncBerror) - 9113 Videotransfererror (CLG-O1HsyncA, VsyncB,Overrunerror) - 9114 Videotransfererror (CLG-O1HsyncA, VsyncAerror)
7-74
7
Location Alarm ofTrouble Code
75
7-75
Details Location Alarm ofTrouble Code
75 75
Description
-
Description
-
Details
75
75
75
75
75
75
75
75
75
75
75 75 75 75
- 9115 Videotransfererror (CLG-O1HsyncA, VsyncA,Overunerror) - 9116 Videotransfererror (CLG-O1HsyncA, VsyncA,VsyncBerror) - 9117 Videotransfererror (CLG-O1HsyncA, VsyncA,VsyncB, Overunerror) - 9118 Videotransfererror (CLG-O1HsyncA, HsyncBerror) - 9119 Videotransfererror (CLG-O1HsyncA, HsyncB,Overrunerror) - 911A Videotransfererror (CLG-O1HsyncA, HsyncB,VsyncBerror) - 911B Videotransfererror (CLG-O1HsyncA, HsyncB,VsyncB, Overrunerror) - 911C Videotransfererror (CLG-O1HsyncA, HsyncB,VsyncAerror) - 911D Videotransfererror (CLG-O1HsyncA,Hsync B,VsyncA,Overunerror) - 911E Videotransfererror (CLG-O1HsyncA,Hsync B,VsyncA,VsyncBerror) - 911F Videotransfererror (CLG-O1HsyncA,Hsync B,VsyncA,VsyncB,Overr unerror) - 9120 Videotransfererror (CLG-O1timeouterror) - B101 Videotransfererror (CLG-O2Overrunerror) - B102 Videotransfererror (CLG-O2VsyncBerror) - B103 Videotransfer error(CLG-O2 VsyncB,Overrunerror)
75
75 75 75
75
75
75
75
75
75
75 75
75
75
- B104 Videotransfererror (CLG-O2VsyncAerror) - B105 Videotransfererror (CLG-O2VsyncA, Overrunerror) - B106 Videotransfererror (CLG-O2VsyncA, VsyncBerror) - B107 Videotransfererror (CLG-O2VsyncA, VsyncB,Overrunerror) - B108 Videotransfererror (CLG-O2HsyncBerror) - B109 Videotransfererror (CLG-O2HsyncB, Overrunerror) - B10A Videotransfererror (CLG-O2HsyncB, VsyncBerror) - B10B Videotransfererror (CLG-O2HsyncB, VsyncB,Overrunerror) - B10C Videotransfererror (CLG-O2HsyncB, VsyncAerror) - B10D Videotransfererror (CLG-O2HsyncB, VsyncA,Overunerror) - B10E Videotransfererror (CLG-O2HsyncB, VsyncA,VsyncBerror) - B10F Videotransfererror (CLG-O2HsyncB, VsyncA,VsyncB ,Overunerror) - B110 Videotransfererror (CLG-O2HsyncAerror) - B111 Videotransfererror (CLG-O2HsyncA, Overrunerror) - B112 Videotransfererror (CLG-O2HsyncA, VsyncBerror) - B113 Videotransfererror (CLG-O2HsyncA, VsyncB,Overrunerror)
7-75
7
Location Alarm ofTrouble Code
75
7-76
Details Location Alarm ofTrouble Code
76 76 76 76 - 0005 Font - 0006 Font - 0007 Font - 0008 Font 0001 0002 0003 0005 0006 0003 0005 0001 0002 0003 0004 0001 0003 0010 0011 0015 0016 0018 0019 0001 0002 0003 0004 0005 0001 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 PDL PDL PDL PDL PDL GL GL In-housedevelopedPCL In-housedevelopedPCL In-housedevelopedPCL In-housedevelopedPCL BDL BDL BDL BDL BDL BDL BDL BDL Imaging Imaging Imaging Imaging Imaging RIP CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF
Description
-
Description
Details
Failstoanalyzetheinternalfont. Alignmentoffontdataiswrong. Failedtoallocateworkmemorywithscaler.There are3typesdependingonwheretooccur. Failedtoallocateworkmemorywithscaler.There are3typesdependingonwheretooccur. Failstoallocatethememory Failureofrendering DGLentryinvalid Othererrors DLG memory insufficient GLentryinvalid Systemmemoryfull PCLinitializationerror PCLprocessingerror Overflow of work memory for translator Download overflow Adminerror DataAreaerror Graphicserror Charerror Printdatacannotprocessthisversion. Overflow of work memory for translator Syntaxerror IncaseofinvaliddataformatinBDLcustommode. Failstoallocatethememory Failureofrendering Overflow of work memory for translator Imaginginitializationerror Imagingprocessingerror H/WDarthangupbytheDisplayListinjustice PDFdataerror PDFcompressionanalysiserror PDFpagecompressionerror PDFdataprocessingerror PDFmemoryfull PDF temporary file error PDFcoloranalysiserror PDFdatareadingerror PDFoutputselectionerror PDF process file error PDFaccesserror PDFanalysisaccesserror PDFfonterror
75
75
75
75
75
75
75
75
75
75
75
75 76 76 76 76
- B114 Videotransfererror (CLG-O2HsyncA, VsyncAerror) - B115 Videotransfererror (CLG-O2HsyncA, VsyncA,Overunerror) - B116 Videotransfererror (CLG-O2HsyncA, VsyncA,VsyncBerror) - B117 Videotransfererror (CLG-O2HsyncA, VsyncA,VsyncB, Overunerror) - B118 Videotransfererror (CLG-O2HsyncA, HsyncBerror) - B119 Videotransfererror (CLG-O2HsyncA, HsyncB,Overrunerror) - B11A Videotransfererror (CLG-O2HsyncA, HsyncB,VsyncBerror) - B11B Videotransfererror (CLG-O2HsyncA, HsyncB,VsyncB, Overrunerror) - B11C Videotransfererror (CLG-O2HsyncA, HsyncB,VsyncAerror) - B11D Videotransfererror (CLG-O2HsyncA,Hsync B,VsyncA,Overunerror) - B11E Videotransfererror (CLG-O2HsyncA,Hsync B,VsyncA,VsyncBerror) - B11F Videotransfererror (CLG-O2HsyncA,Hsync B,VsyncA,VsyncB,Overr unerror) - B120 Videotransfererror (CLG-O2timeouterror) - 0001 Font - 0002 Font - 0003 Font - 0004 Font
Nomemoryforinternalfont Failstoassuretheworkareatoanalyzethefontthat isdownloadedat"ResourceDownload". Fails to access the file that stores the font. FailstoallocatetheFMworkmemory.
77 77 77 77 77 78 78 79 79 79 79 80 80 80 80 80 80 80 80 81 81 81 81 81 82 83 83 83 83 83 83 83 83 83 83 83 83 83
7-76
7
Location Alarm ofTrouble Code
83 83 83 83 83 84 84 84 84 84 84 84 84 84 0014 0015 0016 0017 0018 0001 0002 0003 0004 0005 0006 0007 0008
7-77
Details
Description
CanonPDF CanonPDF CanonPDF CanonPDF CanonPDF XPSmemoryfullerror XPSspoolfullerror XPSprintrangeerror XPSdocumentdata error XPSpagedataerror XPSimagedataerror XPSfontdataerror XPSnon-supportimage error XPSrenderingerror
- 0009
7-77
ServiceMode
Overview COPIER FEEDER SORTER BOARD
8
Overview
8-2
Servicemodeitemexplanations
Explanatorytextsfortheinitialwindow,mainitems,subitemsandminoritemscanbe displayed. Selectthedesiredinitialwindow,mainitem,subitemorminoritem,thenpres[i](Information button)todisplayanexplanatorytext(hereafter,servicemodecontents)ontheselecteditem. E.g.,COPIER>DISPLAY>Versionwindow
Instructionsonhowtouseservicemodeitemscanbefoundwithintheservicemodeitself. Theinformationexplainswhatitemshavebeenaddedorchangedfrompreviousmodels.
ServiceModeMenu
TOPScreen
1) Press [i] 4) A detailed explanation on the item will be displayed (usage scenarios, instructions, settings range, etc.).
F-8-1
"MODELIST"
"MODELISTCLASSIC"
If"MODELIST"or"MODELISTCLASSIC"ispressed,thescreenwillswitchtoinitialscreenfor eachmode.
TheservicemodecontentscanbedisplayedinJ/E/F/I/G/Slanguages. Servicemodecontents,likesystemsoftware,canbeupgradedbySST.
F-8-2
8-2
8
I/Oinformationenhancement
8-3
DisplayofErrorCode/AlarmCodedescription
Thedetaildescriptionofeachcodecanbeviewedontheerrorcodeandalarmcode occurrencerecordscreen. ERRORCODE:COPIER>DISPLAY>ERR
On the COPIER > I/O, the mode to confirm input output signal of electrical parts used (sensor, motor,fan,etc),makesiteasiertolookfortheintendedelectricalpart. Andthescreenwillalsodisplaytheinputoutputsignal.
Device classification
1) Press the button. Which button to press, will depend on which electrical parts intended and its device classification. For instance, if the host machine uses paper pass detection sensor, then press the button on the "COPIER" and "P-Sensor" position.
2) Then the selected electrical parts classification's mark, name, port number and 0/1 content will appear. F-8-4
ALARMCODE:COPIER>DISPLAY>ERR
3) If the "i" button is pressed, the screen displaying the electrical parts array will appear.
[PS39] [PS42] [PS40] [PS43]
[PS41] [PS37] [PS34] [PS35] [PS36] [PS38] [PS33] [UN53] [PS47] [PS55] [PS56]
F-8-3 F-8-5
8-3
8-4
COPIER>OPTION>BODY,ItemSegmentation
Onthecurrentmachine,thereareextremelymanyitemsintheCOPIER>OPTION>BODY(in related to host machine specification), that it is difficult to reach the intended item. In order to reach the intended item in shorter time, all items inside the BODY is classified to 15categories. Classification
Functionswitching
Securityfeatures
TopreventunauthorizedaccesstoServiceMode,Passwordsetisenabled.
Relatedservicemodes
COPIER>OPTION>FNC-SW>PSWD-SW(Level1)
Setpasswordtypefortransitiontoservicemode. <Settingrange> 0:Nopassword(default) 1:Serviceengineer 2:SystemadministratorandServiceengineer.
Name
FNC-SW
Description
Language,cassette,papersizetype,NAVI/DA connection,count-upspec.,documentsize detection,dirtdetectionlevel UI(UserInterface)displayrelated Fixingrelated Primarytransfer,secondarytransfer,ITB Developerrelated Laser,latentimagerelated Reader,ADFimagerelated
Displayswitching/displaytiming Image related (fixing) Imagerelated(transfer) Imagerelated(developing) Imagerelated(reader/ADF) Imagerelated(controller,other generalitems) Imagequality/copyspeed Cleaning Environmentsettings Paperfeed(pickup,delivery) Noisereduction Network Customization
COPIER>OPTION>FNC-SW>SM-PSWD(Level2)
Passwordforserviceengineerfortransitiontoservicemode. <Settingrange>
Toreinforcethesecurity,changethepasswordfromadefault.
Imagerelated(laser/latentimage) IMG-LSR
IMG-MCON MN-CONimagerelated,andimagerelateditems otherthanthosereferredtoabove. IMG-SPD Powerdownsequence CLEANING Cleaningofchargingunit,drum,transferroller, ITB,etc. ENV-SET FEED-SW SOUND NETWORK CUSTOM Temperature,humidity,environmentalheater, condensation,logacquisition Stackperformance,motorspeedadjustment, deliveryfunctions,etc. Noiserelated Networksettings,IFAX,SEND,E-RDS,etc. Customization
T-8-1
********(eightdigitnumeral)[default:11111111] Aftertheabovesetting,toenterServiceMode,enterpasswordscreenwillappear.
8-4
8-5
1)AdditionalFunctions>SystemSettings>SystemManagerSettings>enterSystem ManagerID>enterSystemPasswordSettings>pressOKbutton.
SwitchingScreen(Level1<->2)
Switchingscreensbetweenlevel1and2hasbeenmadeeasier. Whenlevel1screenisdisplayed,press<LEVEL1>intherightuppersideofthescreen,and itwillswitchtolevel2.
F-8-6
2)Afterenteringthepasswordforservicetechnician(Servicemode:COPIER>Option> FNC-SW>SM-PSWD),pressOKbutton.
SM-PSWD
F-8-7
F-8-8
8-5
8
Languageswitch
8-6
Back-upofservicemode
Infactorysetting,adjustmentsaremadeforeachmachine,andadjustmentvaluesarewritten intheservicelabel. WhenyoureplacedtheDCcontrollerPCB,orexecutedtheRAMclearfunction,adjustment valuesforADJUSTorOPTIONreturntodefault.Therefore,whenyoumadeadjustmentsand changed values of the Service Mode in the field, be sure to write down the changed values in the service label. When there is no relevant field in the service label, write down the values in a blank field.
Service Label
F-8-10 F-8-9
8-6
8
COPIER
DISPLAY
VERSION
COPIER>DISPLAY>VERSION
DC-CON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo R-CON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-7
COPIER>DISPLAY>VERSION
PANEL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofControlPanelCPUPCBROMversion TodisplaytheROMversionofControlPanelCPUPCB. When upgrading the firmware 00.01to99.99 -
Display of DCON firmware version To display the firmware version of DC Controller PCB. When upgrading the firmware 00.01to99.99 Display of RCON firmware version To display the firmware version of Reader Controller PCB. When upgrading the firmware 00.01to99.99 -
8-7
8
COPIER>DISPLAY>VERSION
ECO Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FEEDER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SORTER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-8
COPIER>DISPLAY>VERSION
NIB Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PS/PCL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SDL-STCH Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Displayofnetworksoftwareversion Todisplaytheversionofthenetworksoftware. When upgrading the firmware 00.01to99.99 DisplayofUFRfunctionversion TodisplaytheUFRfunctionversion When upgrading the firmware 00.01to99.99 DisofSaddleSttchCtrollrPCBROMver TodisplaytheROMversionoftheSaddleStitcherController PCB. When upgrading the firmware 00.01to99.99 -
DisplayofECO-IDPCBROMversion TodisplaytheROMversionofECO-IDPCB When upgrading the firmware 00.01to99.99 Notused Display of FIN-CONT firmware version To display the firmware version of Finisher Controller PCB. When upgrading the firmware 00.01to99.99 -
8-8
8
COPIER>DISPLAY>VERSION
OP-CON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MN-CONT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RUI Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-9
COPIER>DISPLAY>VERSION
PUNCH Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-EN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisplayofPuncherUnitversion TodisplaytheversionofPuncherUnit. When upgrading the firmware 00.01to99.99 Display of English language file version To display the version of English language file. When upgrading the firmware 00.01to99.99 Display of French language file version To display the version of French language file. When upgrading the firmware 00.01to99.99 -
DisplayofOptionControllerPCBROMver TodisplaytheROMverofOptionControllerPCB. When upgrading the firmware 00.01to99.99 Display of MNCON firmware version To display the firmware version of Main Controller PCB. When upgrading the firmware 00.01to99.99 DisplayofremoteUIversion TodisplaytheversionofremoteUI. When upgrading the firmware 00.01to99.99 -
8-9
8
COPIER>DISPLAY>VERSION
LANG-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-JP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-10
COPIER>DISPLAY>VERSION
LANG-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of Czech language file version To display the version of Czech language file. When upgrading the firmware 00.01to99.99 Display of Danish language file version To display the version of Danish language file. When upgrading the firmware 00.01to99.99 Display of Greek language file version To display the version of Greek language file. When upgrading the firmware 00.01to99.99 -
Display of German language file version To display the version of German language file. When upgrading the firmware 00.01to99.99 Display of Italian language file version To display the version of Italian language file. When upgrading the firmware 00.01to99.99 Display of Japanese language file ver To display the version of Japanese language file. When upgrading the firmware 00.01to99.99 -
8-10
8
COPIER>DISPLAY>VERSION
LANG-ES Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-11
COPIER>DISPLAY>VERSION
LANG-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of Hungarian language file ver To display the version of Hungarian language file. When upgrading the firmware 00.01to99.99 Display of Korean language file version To display the version of Korean language file. When upgrading the firmware 00.01to99.99 Display of Dutch language file version To display the version of Dutch language file. When upgrading the firmware 00.01to99.99 -
Display of Spanish language file version To display the version of Spanish language file. When upgrading the firmware 00.01to99.99 Display of Estonian language file ver To display the version of Estonian language file. When upgrading the firmware 00.01to99.99 Display of Finnish language file version To display the version of Finnish language file. When upgrading the firmware 00.01to99.99 -
8-11
8
COPIER>DISPLAY>VERSION
LANG-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-12
COPIER>DISPLAY>VERSION
LANG-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of Russian language file version To display the version of Russian language file. When upgrading the firmware 00.01to99.99 Display of Slovenian language file ver To display the version of Slovenian language file. When upgrading the firmware 00.01to99.99 Display of Swedish language file version To display the version of Swedish language file. When upgrading the firmware 00.01to99.99 -
Display of Norwegian language file ver To display the version of Norwegian language file. When upgrading the firmware 00.01to99.99 Display of Polish language file version To display the version of Polish language file. When upgrading the firmware 00.01to99.99 Display of Portuguese language file ver To display the version of Portuguese language file. When upgrading the firmware 00.01to99.99 -
8-12
8
COPIER>DISPLAY>VERSION
LANG-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ECO-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-13
COPIER>DISPLAY>VERSION
GDI-UFR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisplayofUFRfunctionversion TodisplaytheversionofUFRfunction. When upgrading the firmware 00.01to99.99 Display of Bulgarian language file ver To display the version of Bulgarian language file. When upgrading the firmware 00.01to99.99 Display of Croatian language file ver To display the version of Croatian language file. When upgrading the firmware 00.01to99.99 -
Dis of Chinese language file ver: trad To display the version of Chinese language file (traditional). When upgrading the firmware 00.01to99.99 Dis of Chinese language file ver: smpl To display the version of Chinese language file (simplified). When upgrading the firmware 00.01to99.99 DisplayofECO-IDcode TodisplaytheECO-IDcode. When upgrading the firmware ASCIIcharacterstring(12digits) -
8-13
8
COPIER>DISPLAY>VERSION
LANG-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-14
COPIER>DISPLAY>VERSION
MEAP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OCR-CN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OCR-JP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisplayofMEAPcontentsversion TodisplaytheversionofMEAPcontentsinHDD. When upgrading the firmware 00.01to99.99 Display of Chinese OCR: simplified To display the version of Chinese OCR (simplified). "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisplayofJapaneseOCRversion TodisplaytheversionofJapaneseOCR. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 -
Display of Romanian language file ver To display the version of Romanian language file. When upgrading the firmware 00.01to99.99 Display of Slovak language file version To display the version of Slovak language file. When upgrading the firmware 00.01to99.99 Display of Turkish language file version To display the version of Turkish language file. When upgrading the firmware 00.01to99.99 -
8-14
8
COPIER>DISPLAY>VERSION
OCR-KR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OCR-TW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOOTROM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-15
COPIER>DISPLAY>VERSION
TTS-JA Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TTS-EN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TTS-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofJapanesevoicedictionaryversion TodisplaytheversionofJapanesevoicedictionary. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisofEnglishvoicedictionaryversion TodisplaytheversionofEnglishvoicedictionary. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisofItalianvoicedictionaryversion TodisplaytheversionofItalianvoicedictionary. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 -
DisplayofKoreanOCRversion TodisplaytheversionofKoreanOCR. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisplayofChineseOCRver:traditional TodisplaytheversionofChineseOCR(traditional). "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisplayofBOOTROMversion TodisplaytheversionofBOOTROM. When upgrading the firmware 00.01to99.99 -
8-15
8
COPIER>DISPLAY>VERSION
TTS-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TTS-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo WEB-BRWS Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-16
COPIER>DISPLAY>VERSION
HELP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LANG-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo WEBDAV Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisplayofeasyNAVIversion To display the version of "EASY NAVI" file. When upgrading the firmware VersionshouldbedisplayedforEASYNAVIfunctionbecauseit is an external file. 00.01to99.99 EASYNAVIfunctionisequippedasstandardinsteadofthe conventionalHELPfunction. Display of Catalan language file version To display the version of Catalan language file. --.-- is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisplayofWebDAVversion To display the version of WebDAV file. --.-- is displayed when no file is found. When upgrading the firmware 00.01to99.99 -
DisofFrenchvoicedictionaryversion TodisplaytheversionofFrenchvoicedictionary. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisofGermanvoicedictionaryversion TodisplaytheversionofGermanvoicedictionary. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisplayofWebbrowserversion TodisplaytheversionofWebbrowser. "--.--" is displayed when no file is found. When upgrading the firmware 00.01to99.99 -
8-16
8
COPIER>DISPLAY>VERSION
TIMESTMP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ASR-JA Lv.1 Details
8-17
COPIER>DISPLAY>VERSION
MEDIA-JA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-EN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-DE Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofJapanesemediainformationver TodisplaytheversionofJapanesemediainformation. When upgrading the firmware 00.01to99.99 DisofEnglishmediainformationversion TodisplaytheversionofEnglishmediainformation. When upgrading the firmware 00.01to99.99 DisofGermanmediainformationversion TodisplaytheversionofGermanmediainformation. When upgrading the firmware 00.01to99.99 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ASR-EN Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Displayoftimestampversion To display the version of Time Stamp file. --.-- is displayed when no file is found. When upgrading the firmware 00.01to99.99 DisofJapaneseASRdictionaryversion TodisplaytheversionofJapaneseautomaticspeechrecognition dictionary. --.-- is displayed when no file is found. When upgrading the firmware 00.01to99.99 ASR:AutomaticSpeechRecognition(voicerecognition) DisofEnglishASRdictionaryversion TodisplaytheversionofEnglishautomaticspeechrecognition dictionary. --.-- is displayed when no file is found. When upgrading the firmware 00.01to99.99 ASR:AutomaticSpeechRecognition(voicerecognition)
8-17
8
COPIER>DISPLAY>VERSION
MEDIA-IT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-FR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-18
COPIER>DISPLAY>VERSION
MEDIA-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofSlovakmediainformationversion TodisplaytheversionofSlovakmediainformation. When upgrading the firmware 00.01to99.99 DisofTurkishmediainformationversion TodisplaytheversionofTurkishmediainformation. When upgrading the firmware 00.01to99.99 DisofCzechmediainformationversion TodisplaytheversionofCzechmediainformation. When upgrading the firmware 00.01to99.99 -
DisofItalianmediainformationversion TodisplaytheversionofItalianmediainformation. When upgrading the firmware 00.01to99.99 DisofFrenchmediainformationversion TodisplaytheversionofFrenchmediainformation. When upgrading the firmware 00.01to99.99 DisofChinesemediainfover:smpl To display the version of Chinese media information (simplified). When upgrading the firmware 00.01to99.99 -
8-18
8
COPIER>DISPLAY>VERSION
MEDIA-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-ES Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-19
COPIER>DISPLAY>VERSION
MEDIA-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofFinnishmediainformationversion TodisplaytheversionofFinnishmediainformation. When upgrading the firmware 00.01to99.99 DisofHungarianmediainformationver TodisplaytheversionofHungarianmediainformation. When upgrading the firmware 00.01to99.99 DisofKoreanmediainformationversion TodisplaytheversionofKoreanmediainformation. When upgrading the firmware 00.01to99.99 -
DisofGreekmediainformationversion TodisplaytheversionofGreekmediainformation. When upgrading the firmware 00.01to99.99 DisofSpanishmediainformationversion TodisplaytheversionofSpanishmediainformation. When upgrading the firmware 00.01to99.99 DisofEstonianmediainformationver TodisplaytheversionofEstonianmediainformation. When upgrading the firmware 00.01to99.99 -
8-19
8
COPIER>DISPLAY>VERSION
MEDIA-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-20
COPIER>DISPLAY>VERSION
MEDIA-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofPortuguesemediainformationver TodisplaytheversionofPortuguesemediainformation. When upgrading the firmware 00.01to99.99 DisofRussianmediainformationversion TodisplaytheversionofRussianmediainformation. When upgrading the firmware 00.01to99.99 DisofSlovenianmediainformationver TodisplaytheversionofSlovenianmediainformation. When upgrading the firmware 00.01to99.99 -
DisofDutchmediainformationversion TodisplaytheversionofDutchmediainformation. When upgrading the firmware 00.01to99.99 DisofNorwegianmediainformationver TodisplaytheversionofNorwegianmediainformation. When upgrading the firmware 00.01to99.99 DisofPolishmediainformationversion TodisplaytheversionofPolishmediainformation. When upgrading the firmware 00.01to99.99 -
8-20
8
COPIER>DISPLAY>VERSION
MEDIA-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-21
COPIER>DISPLAY>VERSION
MEDIA-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEDIA-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofCroatianmediainformationver TodisplaytheversionofCroatianmediainformation. When upgrading the firmware 00.01to99.99 DisofRomanianmediainformationver TodisplaytheversionofRomanianmediainformation. When upgrading the firmware 00.01to99.99 DisofCatalanmediainformationversion TodisplaytheversionofCatalanmediainformation. When upgrading the firmware 00.01to99.99 -
DisofSwedishmediainformationversion TodisplaytheversionofSwedishmediainformation. When upgrading the firmware 00.01to99.99 DisofChinesemediainfoversion:trad TodisplaytheversionofChinesemediainformation(traditional). When upgrading the firmware 00.01to99.99 DisofBulgarianmediainformationver TodisplaytheversionofBulgarianmediainformation. When upgrading the firmware 00.01to99.99 -
8-21
8
COPIER>DISPLAY>VERSION
ECO2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FAX1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FAX2/3/4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-22
COPIER>DISPLAY>VERSION
IOCS Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SYSTEM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ROOT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisplayofBIOSversion TodisplaytheBIOSversion. When upgrading the firmware 00.01to99.99 Dis of Linux kernel/tool/driver/file ver To display the version of Linux kernel/tool/driver/file. When upgrading the firmware 00.01to99.99 DisplayofROOTversion TodisplaytheROOTversion. When upgrading the firmware 00.01to99.99 -
Notused Displayof1-lineFAXPCBROMversion TodisplaytheROMversionof1-lineFAXPCB. NULLisdisplayedifthePCBisnotconnected. When upgrading the firmware ASCIIcharacterstring(12digits) Disof2/3/4-lineFAXPCBROMversion TodisplaytheROMversionof2/3/4-lineFAXPCB. NULLisdisplayedifthePCBisnotconnected. When upgrading the firmware ASCIIcharacterstring(12digits) -
8-22
8
COPIER>DISPLAY>VERSION
S-LNG-JP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo S-LNG-EN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo S-LNG-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-23
COPIER>DISPLAY>VERSION
S-LNG-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo S-LNG-GR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo S-LNG-SP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of service mode Italian file version To display the version of Italian language file in service mode. When upgrading the firmware 00.01to99.99 Dis of service mode German file version To display the version of German language file in service mode. When upgrading the firmware 00.01to99.99 Dis of service mode Spanish file version To display the version of Spanish language file in service mode. When upgrading the firmware 00.01to99.99 -
Dis of service mode Japanese file ver To display the version of Japanese language file in service mode. When upgrading the firmware 00.01to99.99 Dis of service mode English file version To display the version of English language file in service mode. When upgrading the firmware 00.01to99.99 Dis of service mode French file version To display the version of French language file in service mode. When upgrading the firmware 00.01to99.99 -
8-23
8
COPIER>DISPLAY>VERSION
COPY-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-24
COPIER>DISPLAY>VERSION
MOBPR-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RPTL-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-AP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Displayofmobileprint(JAVAUI)version Todisplaytheversionofthemobileprintapplication(JAVAUI). When upgrading the firmware 00.01to99.99 DisplayofRUIportalversion TodisplaytheRUIportalversion. When upgrading the firmware 00.01to99.99 Disofusefulfuncintroduceappliver TodisplaytheversionofIntroductiontoUsefulFeatures application. When upgrading the firmware 00.01to99.99 -
DisplayofCOPY(JAVAUI)version TodisplaytheversionofCOPYapplication(JAVAUI). When upgrading the firmware 00.01to99.99 DisplayofSEND(JAVAUI)version TodisplaytheversionofSENDapplication(JAVAUI). When upgrading the firmware 00.01to99.99 DisplayofBOX(JAVAUI)version TodisplaytheversionofBOXapplication(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-24
8
COPIER>DISPLAY>VERSION
TSP-JLK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-25
COPIER>DISPLAY>VERSION
COPY-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of COPY appli German file version To display the German language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Spanish file version To display the Spanish language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis COPY appli Chinese file ver: smpl To display the simplified Chinese language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 -
DisofImageDataAnalyzerPCBversion TodisplaytheversionofImageDataAnalyzerPCB. When upgrading the firmware 00.01to99.99 Dis of COPY appli French file version To display the French language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Italian file version To display the Italian language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 -
8-25
8
COPIER>DISPLAY>VERSION
COPY-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-26
COPIER>DISPLAY>VERSION
COPY-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of COPY appli Danish file version To display the Danish language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Greek file version To display the Greek language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Estonian file version To display the Estonian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of COPY appli Chinese file ver:trad To display the traditional Chinese language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Korean file version To display the Korean language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Czech file version To display the Czech language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 -
8-26
8
COPIER>DISPLAY>VERSION
COPY-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-27
COPIER>DISPLAY>VERSION
COPY-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of COPY appli Norwegian file version To display the Norwegian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Polish file version To display the Polish language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Portuguese file ver To display the Portuguese language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of COPY appli Finnish file version To display the Finnish language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Hungarian file version To display the Hungarian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Dutch file version To display the Dutch language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 -
8-27
8
COPIER>DISPLAY>VERSION
COPY-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-28
COPIER>DISPLAY>VERSION
COPY-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of COPY appli Indonesian file ver To display the Indonesian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Bulgarian file version To display the Bulgarian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Croatian file version To display the Croatian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of COPY appli Russian file version To display the Russian language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Slovenian file version To display the Slovenian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Swedish file version To display the Swedish language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-28
8
COPIER>DISPLAY>VERSION
COPY-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-29
COPIER>DISPLAY>VERSION
COPY-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of COPY appli Catalan file version To display the Catalan language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli French file version To display the French language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Italian file version To display the Italian language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of COPY appli Romanian file version To display the Romanian language file version of COPY application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Slovak file version To display the Slovak language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of COPY appli Turkish file version To display the Turkish language file version of COPY application (JAVAUI). When upgrading the firmware 00.01to99.99 -
8-29
8
COPIER>DISPLAY>VERSION
SEND-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-30
COPIER>DISPLAY>VERSION
SEND-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of SEND appli Chinese file ver:trad To display the traditional Chinese language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Korean file version To display the Korean language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Czech file version To display the Czech language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of SEND appli German file version To display the German language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Spanish file version To display the Spanish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis SEND appli Chinese file ver: smpl To display the simplified Chinese language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-30
8
COPIER>DISPLAY>VERSION
SEND-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-31
COPIER>DISPLAY>VERSION
SEND-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of SEND appli Finnish file version To display the Finnish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Hungarian file version To display the Hungarian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Dutch file version To display the Dutch language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of SEND appli Danish file version To display the Danish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Greek file version To display the Greek language file version of the SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Estonian file version To display the Estonian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-31
8
COPIER>DISPLAY>VERSION
SEND-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-32
COPIER>DISPLAY>VERSION
SEND-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of SEND appli Russian file version To display the Russian language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Slovenian file version To display the Slovenian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Swedish file version To display the Swedish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of SEND appli Norwegian file version To display the Norwegian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Polish file version To display the Polish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Portuguese file ver To display the Portuguese language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-32
8
COPIER>DISPLAY>VERSION
SEND-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-33
COPIER>DISPLAY>VERSION
SEND-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of SEND appli Romanian file version To display the Romanian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Slovak file version To display the Slovak language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Turkish file version To display the Turkish language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of SEND appli Indonesian file ver To display the Indonesian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Bulgarian file version To display the Bulgarian language file version of SEND application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of SEND appli Croatian file version To display the Croatian language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 -
8-33
8
COPIER>DISPLAY>VERSION
SEND-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-34
COPIER>DISPLAY>VERSION
INTRO-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of useful func intro German file ver To display the version of German language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Spanish file ver To display the version of Spanish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Useful func intro Chinese file ver: smpl To display the version of simplified Chinese language file of IntroductiontoUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
Dis of SEND appli Catalan file version To display the Catalan language file version of SEND application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of useful func intro French file ver To display the version of French language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Italian file ver To display the version of Italian language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
8-34
8
COPIER>DISPLAY>VERSION
INTRO-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-35
COPIER>DISPLAY>VERSION
INTRO-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of useful func intro Danish file ver To display the version of Danish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Greek file ver To display the version of Greek language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Estonian file ver To display the version of Estonian language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
Useful func intro Chinese file ver: trad To display the version of traditional Chinese language file of IntroductiontoUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Korean file ver To display the version of Korean language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Czech file ver To display the version of Czech language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
8-35
8
COPIER>DISPLAY>VERSION
INTRO-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-36
COPIER>DISPLAY>VERSION
INTRO-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis useful func intro Norwegian file ver To display the version of Norwegian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Polish file ver To display the version of Polish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Portuguese filever To display the version of Portuguese language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
Dis useful func intro Finnish file ver To display the version of Finnish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Hungarian file ver To display the version of Hungarian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Dutch file ver To display the version of Dutch language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
8-36
8
COPIER>DISPLAY>VERSION
INTRO-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-37
COPIER>DISPLAY>VERSION
INTRO-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of useful func intro Indon file ver To display the version of Indonesian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Bulgarian file ver To display the version of Bulgarian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Croatian file ver To display the version of Croatian language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
Dis useful func intro Russian file ver To display the version of Russian language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Slovenian file ver To display the version of Slovenian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Swedish file ver To display the version of Swedish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
8-37
8
COPIER>DISPLAY>VERSION
INTRO-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTRO-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-38
COPIER>DISPLAY>VERSION
INTRO-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis useful func intro Catalan file ver To display the version of Catalan language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu French file version To display the version of French language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Italian file version To display the version of Italian language file for custom menu application. When upgrading the firmware 00.01to99.99 -
Dis useful func intro Romanian file ver To display the version of Romanian language file of Introduction toUsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis of useful func intro Slovak file ver To display the version of Slovak language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 Dis useful func intro Turkish file ver To display the version of Turkish language file of Introduction to UsefulFeaturesapplication. When upgrading the firmware 00.01to99.99 -
8-38
8
COPIER>DISPLAY>VERSION
CSTMN-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-39
COPIER>DISPLAY>VERSION
CSTMN-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of custom menu Chinese file ver:trad To display the version of traditional Chinese language file for custommenuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Korean file version To display the version of Korean language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Czech file version To display the version of Czech language file for custom menu application. When upgrading the firmware 00.01to99.99 -
Dis of custom menu German file version To display the version of German language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Spanish file version To display the version of Spanish language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis custom menu Chinese file ver: smpl To display the version of simplified Chinese language file for custommenuapplication. When upgrading the firmware 00.01to99.99 -
8-39
8
COPIER>DISPLAY>VERSION
CSTMN-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-40
COPIER>DISPLAY>VERSION
CSTMN-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of custom menu Finnish file version To display the version of Finnish language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Hungarian file ver To display the version of Hungarian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Dutch file version To display the version of Dutch language file for custom menu application. When upgrading the firmware 00.01to99.99 -
Dis of custom menu Danish file version To display the version of Danish language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Greek file version To display the version of Greek language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Estonian file version To display the version of Estonian language file for custom menu application. When upgrading the firmware 00.01to99.99 -
8-40
8
COPIER>DISPLAY>VERSION
CSTMN-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-41
COPIER>DISPLAY>VERSION
CSTMN-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of custom menu Russian file version To display the version of Russian language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Slovenian file ver To display the version of Slovenian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Swedish file version To display the version of Swedish language file for custom menu application. When upgrading the firmware 00.01to99.99 -
Dis of custom menu Norwegian file ver To display the version of Norwegian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Polish file version To display the version of Polish language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Portuguese file ver To display the version of Portuguese language file for custom menuapplication. When upgrading the firmware 00.01to99.99 -
8-41
8
COPIER>DISPLAY>VERSION
CSTMN-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-42
COPIER>DISPLAY>VERSION
CSTMN-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CSTMN-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of custom menu Romanian file version To display the version of Romanian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Slovak file version To display the version of Slovak language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of custom menu Turkish file version To display the version of Turkish language file for custom menu application. When upgrading the firmware 00.01to99.99 -
Dis of custom menu Indonesian file ver To display the version of Indonesian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Bulgarian file ver To display the version of Bulgarian language file for custom menuapplication. When upgrading the firmware 00.01to99.99 Dis of custom menu Croatian file version To display the version of Croatian language file for custom menu application. When upgrading the firmware 00.01to99.99 -
8-42
8
COPIER>DISPLAY>VERSION
CSTMN-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-43
COPIER>DISPLAY>VERSION
ACSBT-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of accessibility German file version To display the version of German language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Spanish file ver To display the version of Spanish language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis Accessibility Chinese file ver: smpl To display the version of simplified Chinese language file for Accessibilityapplication. When upgrading the firmware 00.01to99.99 -
Dis of custom menu Catalan file version To display the version of Catalan language file for custom menu application. When upgrading the firmware 00.01to99.99 Dis of accessibility French file version To display the version of French language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Italian file ver To display the version of Italian language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
8-43
8
COPIER>DISPLAY>VERSION
ACSBT-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-44
COPIER>DISPLAY>VERSION
ACSBT-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of accessibility Danish file version To display the version of Danish language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Greek file version To display the version of Greek language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Estonian file ver To display the version of Estonian language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
Dis accessibility Chinese file ver:trad To display the version of traditional Chinese language file for Accessibilityapplication. When upgrading the firmware 00.01to99.99 Dis of accessibility Korean file version To display the version of Korean language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Czech file version To display the version of Czech language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
8-44
8
COPIER>DISPLAY>VERSION
ACSBT-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-45
COPIER>DISPLAY>VERSION
ACSBT-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of accessibility Norwegian file ver To display the version of Norwegian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Polish file version To display the version of Polish language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Portuguese file ver To display the version of Portuguese language file for Accessibilityapplication. When upgrading the firmware 00.01to99.99 -
Dis of accessibility Finnish file ver To display the version of Finnish language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Hungarian file ver To display the version of Hungarian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Dutch file version To display the version of Dutch language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
8-45
8
COPIER>DISPLAY>VERSION
ACSBT-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-46
COPIER>DISPLAY>VERSION
ACSBT-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of accessibility Indonesian file ver To display the version of Indonesian language file for Accessibilityapplication. When upgrading the firmware 00.01to99.99 Dis of accessibility Bulgarian file ver To display the version of Bulgarian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Croatian file ver To display the version of Croatian language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
Dis of accessibility Russian file ver To display the version of Russian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Slovenian file ver To display the version of Slovenian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Swedish file ver To display the version of Swedish language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
8-46
8
COPIER>DISPLAY>VERSION
ACSBT-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACSBT-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-47
COPIER>DISPLAY>VERSION
ACSBT-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of accessibility Catalan file ver To display the version of Catalan language file for Accessibility application. When upgrading the firmware 00.01to99.99 Display of ERS French file version To display the version of French language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Italian file version To display the version of Italian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
Dis of accessibility Romanian file ver To display the version of Romanian language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Slovak file version To display the version of Slovak language file for Accessibility application. When upgrading the firmware 00.01to99.99 Dis of accessibility Turkish file ver To display the version of Turkish language file for Accessibility application. When upgrading the firmware 00.01to99.99 -
8-47
8
COPIER>DISPLAY>VERSION
ERS-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-48
COPIER>DISPLAY>VERSION
ERS-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of ERS Chinese file ver:trad To display the version of traditional Chinese language file for ERSapplication. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Korean file version To display the version of Korean language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Czech file version To display the version of Czech language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
Display of ERS German file version To display the version of German language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Spanish file version To display the version of Spanish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Chinese file ver:smpl To display the version of simplified Chinese language file for ERSapplication. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
8-48
8
COPIER>DISPLAY>VERSION
ERS-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-49
COPIER>DISPLAY>VERSION
ERS-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of ERS Finnish file version To display the version of Finnish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Hungarian file version To display the version of Hungarian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Dutch file version To display the version of Dutch language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
Display of ERS Danish file version To display the version of Danish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Greek file version To display the version of Greek language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Estonian file version To display the version of Estonian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
8-49
8
COPIER>DISPLAY>VERSION
ERS-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-50
COPIER>DISPLAY>VERSION
ERS-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of ERS Russian file version To display the version of Russian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Slovenian file version To display the version of Slovenian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Swedish file version To display the version of Swedish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
Display of ERS Norwegian file version To display the version of Norwegian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Polish file version To display the version of Polish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Portuguese file ver To display the version of Portuguese language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
8-50
8
COPIER>DISPLAY>VERSION
ERS-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-51
COPIER>DISPLAY>VERSION
ERS-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERS-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of ERS Romanian file version To display the version of Romanian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Slovak file version To display the version of Slovak language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Turkish file version To display the version of Turkish language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
Display of ERS Indonesian file ver To display the version of Indonesian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Bulgarian file version To display the version of Bulgarian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of ERS Croatian file version To display the version of Croatian language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem
8-51
8
COPIER>DISPLAY>VERSION
ERS-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-52
COPIER>DISPLAY>VERSION
UAC-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of UAC German file version To display the version of German language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Spanish file version To display the version of Spanish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Chinese file ver:smpl To display the version of simplified Chinese language file for UACapplication. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
Display of ERS Catalan file version To display the version of Catalan language file for ERS application. When upgrading the firmware 00.01to99.99 ERS:ErrorRecoverySystem Display of UAC French file version To display the version of French language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Italian file version To display the version of Italian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
8-52
8
COPIER>DISPLAY>VERSION
UAC-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-53
COPIER>DISPLAY>VERSION
UAC-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of UAC Danish file version To display the version of Danish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Greek file version To display the version of Greek language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Estonian file version To display the version of Estonian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
Display of UAC Chinese file ver:trad To display the version of traditional Chinese language file for UACapplication. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Korean file version To display the version of Korean language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Czech file version To display the version of Czech language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
8-53
8
COPIER>DISPLAY>VERSION
UAC-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-54
COPIER>DISPLAY>VERSION
UAC-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of UAC Norwegian file version To display the version of Norwegian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Polish file version To display the version of Polish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Portuguese file ver To display the version of Portuguese language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
Display of UAC Finnish file version To display the version of Finnish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Hungarian file version To display the version of Hungarian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Dutch file version To display the version of Dutch language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
8-54
8
COPIER>DISPLAY>VERSION
UAC-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-55
COPIER>DISPLAY>VERSION
UAC-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of UAC Indonesian file ver To display the version of Indonesian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Bulgarian file version To display the version of Bulgarian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Croatian file version To display the version of Croatian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
Display of UAC Russian file version To display the version of Russian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Slovenian file version To display the version of Slovenian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Swedish file version To display the version of Swedish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
8-55
8
COPIER>DISPLAY>VERSION
UAC-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UAC-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-56
COPIER>DISPLAY>VERSION
UAC-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-FR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-IT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Display of UAC Catalan file version To display the version of Catalan language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of BOX appli French file version To display the version of French language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Italian file version To display the version of Italian language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Display of UAC Romanian file version To display the version of Romanian language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Slovak file version To display the version of Slovak language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl Display of UAC Turkish file version To display the version of Turkish language file for UAC application. When upgrading the firmware 00.01to99.99 UAC:UserAccessControl
8-56
8
COPIER>DISPLAY>VERSION
BOX-DE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-ES Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-ZH Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-57
COPIER>DISPLAY>VERSION
BOX-TW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-KO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-CS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of BOX appli Chinese file ver:trad To display the version of traditional Chinese language file for BOXapplication(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Korean file version To display the version of Korean language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Czech file version To display the version of Czech language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Display of BOX appli German file version To display the version of German language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Spanish file version To display the version of Spanish language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Chinese file ver:smpl To display the version of simplified Chinese language file for BOXapplication(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-57
8
COPIER>DISPLAY>VERSION
BOX-DA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-EL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-ET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-58
COPIER>DISPLAY>VERSION
BOX-FI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-HU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-NL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of BOX appli Finnish file version To display the version of Finnish language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Hungarian file version To display the version of Hungarian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Dutch file version To display the version of Dutch language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 -
Display of BOX appli Danish file version To display the version of Danish language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Greek file version To display the version of Greek language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Estonian file version To display the version of Estonian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-58
8
COPIER>DISPLAY>VERSION
BOX-NO Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-PL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-PT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-59
COPIER>DISPLAY>VERSION
BOX-RU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-SL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-SV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of BOX appli Russian file version To display the version of Russian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Slovenian file version To display the version of Slovenian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Swedish file version To display the version of Swedish language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 -
Dis of BOX appli Norwegian file version To display the version of Norwegian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Polish file version To display the version of Polish language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Portuguese file ver To display the version of Portuguese language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-59
8
COPIER>DISPLAY>VERSION
BOX-ID Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-BU Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-CR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-60
COPIER>DISPLAY>VERSION
BOX-RM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-SK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-TK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis of BOX appli Romanian file version To display the version of Romanian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Display of BOX appli Slovak file version To display the version of Slovak language file for BOX application (JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Turkish file version To display the version of Turkish language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 -
Display of BOX appli Indonesian file ver To display the version of Indonesian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Bulgarian file version To display the version of Bulgarian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 Dis of BOX appli Croatian file version To display the version of Croatian language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 -
8-60
8
COPIER>DISPLAY>VERSION
BOX-CA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-61
Dis of BOX appli Catalan file version To display the version of Catalan language file for BOX application(JAVAUI). When upgrading the firmware 00.01to99.99 T-8-2
8-61
8
USER
COPIER>DISPLAY>USER
SPDTYPE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BRWS-STS Lv.1 Details
8-62 ACC-STS
COPIER>DISPLAY>ACC-STS
FEEDER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SORTER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange DisplayofDADFconnectionstate TodisplaytheconnectingstateofDADF. WhencheckingtheconnectionbetweenthemachineandDADF 0to1 0:Notconnected,1:Connected ConnectstateofFinisher-relatedoption TodisplaytheconnectingstateofFinisher-relatedoptions. WhencheckingtheconnectionofFinisher-relatedoptions Leftcolumn(connectingstateofFinisher-relatedoptions):1to5 1:WithoutSaddle 2:WithSaddle,withoutFoldingUnit 3:WithSaddleandInserter,withoutFoldingUnit 4:WithSaddleandFoldingUnit,withoutInserter 5:WithSaddle,InserterandFoldingUnit Rightcolumn(connectingstateofFinisher-belongedInserter):0 to4 0:nohole,1:2-hole,2:2/3-hole,3:4-hole,4:4-hole(SW) -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofCtrollrBoardenginespeedtype Todisplaytheenginespeedtype(ppm)ofControllerBoard. WhencheckingtheenginespeedtypeofControllerBoard Displayofservicebrowserusestatus Todisplaytheusestatusofthebrowserforserviceengineersin theservicemodeinitialscreen. GotoCOPIER>FUNCTION>INSTALL>BRWS-ACTtoturn ON/OFFthebrowserforserviceengineers. Whencheckingtheoperationmodeofthebrowserforservice engineers COPIER>FUNCTION>INSTALL>BRWS-ACT T-8-3
8-62
8
COPIER>DISPLAY>ACC-STS
DECK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-63
COPIER>DISPLAY>ACC-STS
RAM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COINROBO Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo NIB Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange DisplayofMNCONPCBmemorycapacity TodisplaythememorycapacityoftheMainControllerPCB. Whencheckingthememorycapacityofthemachine MB 1G DisofCoinManagerconnectionstate TodisplaytheconnectingstateoftheCoinManager. Whencheckingtheconnectionbetweenthemachineandthe CoinManager 0to1 0:Notconnected,1:Connected DisplayofNetworkPCBconnectionstate TodisplaytheconnectingstateoftheNetworkPCB. Whencheckingtheconnectionbetweenthemachineandthe NetworkPCB 0to3 0:Notconnected,1:EthernetPCBconnected,2:TokenRing PCBconnected,3:EthernetPCB+TokenRingPCBconnected -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CARD Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
DisofPaperDeckconnectionstate TodisplaytheconnectingstateofthePaperDeck. Whencheckingtheconnectionbetweenthemachineandthe PaperDecks 0:Notconnected 1:Connected 5:Multi-purposeTrayonly DisofconnectionstateofCardReader TodisplaytheconnectingstateofCardReader. Whencheckingtheconnectionbetweenthemachineandthe CardReader 0to1 0:NocardisinsertedwhiletheCardReaderisconnected.(Copy isnotavailable.) 1:CardReaderisnotconnected,orcardisinsertedwhilethe CardReaderisconnected.(Copyisavailable.) -
8-63
8
COPIER>DISPLAY>ACC-STS
NETWARE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SEND Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-64
COPIER>DISPLAY>ACC-STS
PDL-FNC1 Lv.1 Details DisplayofenablingPDLfunction(1) Todisplayenabling/disablingstateofPDLfunctioninbitrow. Whenthecorrespondingbitforeachfunctionis0,thefunction isdisabled.Whenthecorrespondingbitis1,thefunctionis enabled. WhendisplayingtheavailablePDLonthemachine 0000000000000000to1111111111111111 0:Disabled,1:Enabled bit31:BDL bit30:PS bit29:PCL bit28:PDF bit27:LIPS(LIPS/LXemulation) bit26:N201(LIPS/LXemulation) bit25:I5577(LIPS/LXemulation) bit24:ESC/P(LIPS/LXemulation) bit23:HPGL(LIPS/LXemulation) bit22:HPCL2(LIPS/LXemulation) DisplayofenablingPDLfunction(2) Todisplayenabling/disablingstateofPDLfunctioninbitrow. Whenthecorrespondingbitforeachfunctionis0,thefunction isdisabled.Whenthecorrespondingbitis1,thefunctionis enabled. WhendisplayingtheavailablePDLonthemachine 0000000000000000to1111111111111111 0:Disabled,1:Enabled b15tob0:Reserved(tobeusedwhenPDLisnewlyadded) -
Dis of NetWare firmware install state To display the installation state of the NetWare firmware. When checking whether NetWare firmware is installed to the machine 0to1 0:Notinstalled,1:Installed DisplayofSENDsupportPCBexistence TodisplaywhetherthereisPCBtosupportSENDfunction. SENDfunctioncanbeusedonlywhenthePCBismounted. Whencheckingtheconnectionbetweenthemachineandthe PCBthatsupportsSENDfunction 0to1 0:Notmounted,1:Mounted -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PDL-FNC2 Lv.1 Details
8-64
8
COPIER>DISPLAY>ACC-STS
HDD Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-65
COPIER>DISPLAY>ACC-STS
PCI2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange DisplayofPCI2-connectedPCBname TodisplaythenameofthePCBthatisconnectedtoPCI2. WhencheckingnameofthePCBthatisconnectedtoPCI2 -:NoPCBconnected iSLOT:iSLOTWirelessLANPCB VoiceBoard:VoicePCB VoiceBoardR:VoiceRecognitionPCB(Displayishiddenonthis machine.) 3DESBoard:EncryptionPCB 1Gbit-Board:GigaEthernetPCB DisplayofPCI3-connectedPCBname TodisplaythenameofthePCBthatisconnectedtoPCI3. WhencheckingnameofthePCBthatisconnectedtoPCI3 -:NoPCBconnected iSLOT:iSLOTWirelessLANPCB VoiceBoard:VoicePCB VoiceBoardR:VoiceRecognitionPCB(Displayishiddenonthis machine.) 3DESBoard:EncryptionPCB 1Gbit-Board:GigaEthernetPCB -
DisplayofHDDmodelname TodisplaythemodelnameofHDD. WhencheckingthemodelnameofHDDusedonthemachine DisplayofPCI1-connectedPCBname TodisplaythenameofthePCBthatisconnectedtoPCI1. WhencheckingthenameofthePCBthatisconnectedtoPCI1 -:NoPCBconnected VoiceBoard:VoicePCB 3DESBoard:EncryptionPCB 1Gbit-Board:GigaEthernetPCB -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PCI3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-65
8
COPIER>DISPLAY>ACC-STS
USBH-SPD Lv.2 Details
8-66 ANALOG
COPIER>DISPLAY>ANALOG
TEMP Lv.1 Details Displayofoutsidetemperature Todisplaythetemperatureoutsidethemachine. ThisismeasuredbytheEnvironmentSensor2thatdetectsthe outsideair. Whencheckingthetemperatureoutsidethemachine 0to50 DegC 20to27 Displayofoutsidehumidity Todisplaythehumidityoutsidethemachine. ThisismeasuredbytheEnvironmentSensor2thatdetectsthe outsideair. Whencheckingthehumidityoutsidethemachine 0to100 % 30to70 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo IA-RAM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisplayofUSBdeviceconnectionspeed Todisplaytheconnectionspeedof8USBdevicestobe connectedtoUSB-Hostchips. High-speedconnectionmaynotbepossibleonsomemachines resultinginlow-speedconnection. Samplemessage:USBH-SPDOFFOFFOFFFLLOFFHGH OFFLOW WhencheckingtheconnectionspeedofUSBdevices OFF:Notconnected,LOW:Low-speedconnection,FLL:Full connection,HGH:High-speedconnection DisplayofMNCONPCBmemory(IA)capacity Todisplaythememory(IA)capacityoftheMainControllerPCB. WhencheckingthememorycapacityoftheMainControllerPCB MB 1G T-8-4
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HUM Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-66
8
COPIER>DISPLAY>ANALOG
ABS-HUM Lv.1 Details
8-67
COPIER>DISPLAY>ANALOG
FIX-E2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TEMP2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HUM2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofFixingHeaterfrontedgetemp TodisplaythefrontedgetemperatureoftheFixingHeater detectedbytheSubThermistor1. WhencheckingtheedgetemperatureoftheFixingHeater 0to300 DegC Displayofinsidetemperature Todisplaythetemperatureinsidethemachinedetectedbythe EnvironmentSensor1. Whencheckingthetemperatureinsidethemachine 0to100 DegC 20to27 Displayofinsidehumidity Todisplaythehumidityinsidethemachinedetectedbythe EnvironmentSensor1. Whencheckingthehumidityinsidethemachine 0to100 % 30to70 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FIX-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FIX-E Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Displayofoutsidemoistureamount Todisplaytheabsolutemoistureamountoutsidethemachine. ThisismeasuredbytheEnvironmentSensor2thatdetectsthe outsideair. Whencheckingthemoistureamountoutsidethemachine 0to100 g(g/m3) 0to22 DisplayofFixingFilmtemperature TodisplaythecentertemperatureoftheFixingFilmdetectedby theMainThermistor2. WhencheckingthetemperatureofFixingFilm 0to300 DegC DisofFixingHeatercentertemperature TodisplaythecentertemperatureoftheFixingHeaterdetected bytheMainThermistor1. WhencheckingthetemperatureatthecenterofFixingHeater 0to300 DegC -
8-67
8
COPIER>DISPLAY>ANALOG
FIX-E3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-68 CST-STS
COPIER>DISPLAY>CST-STS
WIDTH-MF Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofMulti-purposeTraypprwidthsize TodisplaythepaperwidthsizesetontheMulti-purposeTray. WhencheckingthepaperwidthsidesetontheMulti-purpose Tray mm T-8-6
8-68
8
HV-STS
COPIER>DISPLAY>HV-STS
1ATVC-Y Lv.2 Details
8-69
COPIER>DISPLAY>HV-STS
1ATVC-C Lv.2 Details Disprytrnspaperintervalcurrent(C) Todisplaythedecuplevalueofthepaperintervalcurrentlastly flown on the Primary Transfer Roller (C) by the primary transfer paperintervalATVCcontrol. WhenestimatingthelifeofPrimaryTransferRollerbasedonthe displayedvalue 0to900 uA 10to500 Disprytrnspprintvlcrrnt(Bk):clr Todisplaythedecuplevalueofthepaperintervalcurrentlastly flown on the Primary Transfer Roller (Bk) by the primary transfer paperintervalATVCcontrolatfull-colorjobs. WhenestimatingthelifeofPrimaryTransferRollerbasedonthe displayedvalue 0to900 uA 10to500 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1ATVC-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Disprytrnspaperintervalcurrent(Y) Todisplaythedecuplevalueofthepaperintervalcurrentlastly flown on the Primary Transfer Roller (Y) by the primary transfer paperintervalATVCcontrol. WhenestimatingthelifeofPrimaryTransferRollerbasedonthe displayedvalue 0to900 uA 10to500 Disprytrnspaperintervalcurrent(M) Todisplaythedecuplevalueofthepaperintervalcurrentlastly flown on the Primary Transfer Roller (M) by the primary transfer paperintervalATVCcontrol. WhenestimatingthelifeofPrimaryTransferRollerbasedonthe displayedvalue 0to900 uA 10to500 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1ATVC-K4 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-69
8
COPIER>DISPLAY>HV-STS
2ATVC Lv.2 Details
8-70
COPIER>DISPLAY>HV-STS
THCK-M Lv.1 Details DisplayofMDrumabrasionamount TodisplaytheabrasionamountofMPhotosensitiveDrumthatis derivedbytheresultofthedrumthicknessdetection. The result of the drum thickness detection is reflected to each controlofcharging,developmentandtransfer. Whencheckingtheadequacyofsettingvaluefortransferand development. WhencheckingthechangesofDrumthicknessagainstthelife ofDrumCartridge. 0to20 um 0to15 DisplayofCDrumabrasionamount TodisplaytheabrasionamountofCPhotosensitiveDrumthatis derivedbytheresultofthedrumthicknessdetection. The result of the drum thickness detection is reflected to each controlofcharging,developmentandtransfer. Whencheckingtheadequacyofsettingvaluefortransferand development. WhencheckingthechangesofDrumthicknessagainstthelife ofDrumCartridge. 0to20 um 0to15 T-8-7
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo THCK-Y Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofSecTransferATVCtargetcurrent Todisplaythedecuplevalueofthecurrent,whichisderivedby the secondary transfer ATVC control, flown on the Secondary TransferOuterRoller. AstheuseofSecondaryTransferOuterRollerisextended,the valueisdecreased. Whenclassifyingthecauseofanimagefailure 0to65535 uA 10to900 DisplayofYDrumabrasionamount TodisplaytheabrasionamountofYPhotosensitiveDrumthatis derivedbytheresultofthedrumthicknessdetection. The result of the drum thickness detection is reflected to each controlofcharging,developmentandtransfer. Whencheckingtheadequacyofsettingvaluefortransferand development. WhencheckingthechangesofDrumthicknessagainstthelife ofDrumCartridge. 0to20 um 0to15 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo THCK-C Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-70
8
CCD
COPIER>DISPLAY>CCD
TARGET-B Lv.2 Details
8-71
COPIER>DISPLAY>CCD
TARGET-R Lv.2 Details Shadingtargetvalue(R) TodisplaytheshadingtargetvalueofRed. Continuousdisplayof0(minimum)orFFFF(maximum)is consideredafailureoftheReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 512to2047 GainlevelofImgSensoroddbit(B):frt TodisplaytheBluegainleveladjustmentvalueinodd-numbered bitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TARGET-G Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Shadingtargetvalue(B) TodisplaytheshadingtargetvalueofBlue. Continuousdisplayof0(minimum)orFFFF(maximum)is consideredafailureoftheReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 512to2047 Shadingtargetvalue(G) TodisplaythetargetvalueofGreen. Continuousdisplayof0(minimum)orFFFF(maximum)is consideredafailureoftheReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 512to2047 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-OB Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-71
8
COPIER>DISPLAY>CCD
GAIN-OG Lv.2 Details
8-72
COPIER>DISPLAY>CCD
GAIN-EB Lv.2 Details GainlevelofImgSensorevenbit(B):frt TodisplaytheBluegainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 GainlevelofImgSensorevenbit(G):frt TodisplaytheGreengainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-OR Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
GainlevelofImgSensoroddbit(G):frt TodisplaytheGreengainleveladjustmentvalueinoddnumberedbitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 GainlevelofImgSensoroddbit(R):frt TodisplaytheRedgainleveladjustmentvalueinodd-numbered bitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-EG Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-72
8
COPIER>DISPLAY>CCD
GAIN-ER Lv.2 Details
8-73
COPIER>DISPLAY>CCD
LAMP2-BW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LAMP2-CL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST-BW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ScanLampintensityadjVL(B&W):back TodisplaytheLEDlightintensityadjustmentvalueofScanner Unit(paperback)inB&Wscanningmode. WhenimagefailureoccursatbacksidescanninginB&Wmode. 20to195 20to195 LEDcannotbereplacedindividually.ReplacetheScannerUnit. ScanLampintensityadjVL(color):back TodisplaytheLEDlightintensityadjustmentvalueofScanner Unit(paperback)incolorscanningmode. Whenimagefailureoccursatbacksidescanningincolormode 33to195 33to195 LEDcannotbereplacedindividually.ReplacetheScannerUnit. ImgSensoroffsetvalue(B&W)[Front] TodisplaytheCMOSSensoroffsetvalueatB&Wscanning. WhenimagefailureoccursatfrontsidescanninginB&Wmode 1to95 1to95 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LAMP-BW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LAMP-CL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
GainlevelofImgSensorevenbit(R):frt TodisplaytheRedgainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperfront). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 0toFFFF 16to246 ScanLampintensityadjVL(B&W):front TodisplaytheLEDlightintensityadjustmentvalueofScanner Unit(paperfront)inB&Wscanningmode. WhenimagefailureoccursatfrontsidescanninginB&Wmode 20to195 20to195 LEDcannotbereplacedindividually.ReplacetheScannerUnit. ScanLampintensityadjVL(color):frt TodisplaytheLEDlightintensityadjustmentvalueofScanner Unit(paperfront)incolorscanningmode. Whenimagefailureoccursatfrontsidescanningincolormode 33to195 33to195 LEDcannotbereplacedindividually.ReplacetheScannerUnit.
8-73
8
COPIER>DISPLAY>CCD
OFST-CL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST2-BW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-BW1 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-74
COPIER>DISPLAY>CCD
GAIN-BW2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-BW3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN-BW4 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ImgSensorgainleveladjVL2(B&W):frt TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue2 ofScannerUnit(paperfront). WhenimagefailureoccursatfrontsidescanninginB&Wmode 1to47 1to47 ImgSensorgainleveladjVL3(B&W):frt TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue3 ofScannerUnit(paperfront). WhenimagefailureoccursatfrontsidescanninginB&Wmode. 1to47 1to47 ImgSensorgainleveladjVL4(B&W):frt TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue4 ofScannerUnit(paperfront). WhenimagefailureoccursatfrontsidescanninginB&Wmode. 1to47 1to47 -
ImgSensoroffsetvalue(color)[Front] TodisplaytheCMOSSensoroffsetvalueatcolorscanning. Whenimagefailureoccursatfrontsidescanningincolormode 1to95 1to95 ImgSensoroffsetvalue(B&W)[Back] TodisplaytheCMOSSensoroffsetvalueatB&Wscanning. WhenimagefailureoccursatbacksidescanninginB&Wmode 1to95 1to95 ImgSensorgainleveladjVL1(B&W):frt TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue1 ofScannerUnit(paperfront). WhenimagefailureoccursatfrontsidescanninginB&Wmode 1to47 1to47 -
8-74
8
COPIER>DISPLAY>CCD
GAIN2BW1 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN2BW2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN2BW3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-75
COPIER>DISPLAY>CCD
GAIN2BW4 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN2-OR Lv.2 Details ImgSensorgainleveladjVL4(B&W):Back TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue4 ofScannerUnit(paperback). WhenimagefailureoccursatbacksidescanninginB&Wmode. 1to47 1to47 GainlevelofImgSensoroddbit(R):bck TodisplaytheRedgainleveladjustmentvalueinodd-numbered bitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 -
ImgSensorgainleveladjVL1(B&W):Back TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue1 ofScannerUnit(paperback). WhenimagefailureoccursatbacksidescanninginB&Wmode. 1to47 1to47 ImgSensorgainleveladjVL2(B&W):Back TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue2 ofScannerUnit(paperback). WhenimagefailureoccursatbacksidescanninginB&Wmode. 1to47 1to47 ImgSensorgainleveladjVL3(B&W):Back TodisplaytheCMOSSensorB&Wgainleveladjustmentvalue3 ofScannerUnit(paperback). WhenimagefailureoccursatbacksidescanninginB&Wmode. 1to47 1to47 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-75
8
COPIER>DISPLAY>CCD
GAIN2-OG Lv.2 Details
8-76
COPIER>DISPLAY>CCD
GAIN2-ER Lv.2 Details GainlevelofImgSensorevenbit(R):bck TodisplaytheRedgainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 GainlevelofImgSensorevenbit(G):bck TodisplaytheGreengainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN2-OB Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
GainlevelofImgSensoroddbit(G):bck TodisplaytheGreengainleveladjustmentvalueinoddnumberedbitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 GainlevelofImgSensoroddbit(B):bck TodisplaytheBluegainleveladjustmentvalueinodd-numbered bitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo GAIN2-EG Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-76
8
COPIER>DISPLAY>CCD
GAIN2-EB Lv.2 Details
8-77 DPOT
COPIER>DISPLAY>DPOT
2TR-PPR Lv.2 Details DisofsectrnsATVCpprallottedvoltg Todisplaythepaperallottedvoltagesetbythelatestsecondary transferFullATVCcontrol. Theappropriaterangemaybeexceededduetowrongmedia setting. Whentransferfailureoccursoncertainmedia 0to5000 V Dependingonmedia DisofsectransferATVCbasevoltage Todisplaythebasevoltagesetbythelatestsecondarytransfer FullATVCcontrol. Theappropriaterangemaybeexceededduetowrongmedia setting. Whentransferfailureoccursoncertainmedia 0to6000 V 500to5000 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST2-CL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
GainlevelofImgSensorevenbit(B):bck TodisplaytheBluegainleveladjustmentvalueinevennumberedbitonCMOSSensorofScannerUnit(paperback). Continuousdisplayofupperlimitisconsideredafailureofthe ScannerUnit/ReaderControllerPCB. WhenreplacingtheReaderControllerPCB Atscannedimagefailure 1to47 1to47 ImgSensoroffsetvalue(color)[Back] TodisplaytheCMOSSensoroffsetvalueatcolorscanning. Whenimagefailureoccursatbacksidescanningincolormode. 1to95 1to95 T-8-8
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-BASE Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-77
8
COPIER>DISPLAY>DPOT
1TR-DC-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1TR-DC-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1TR-DC-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-78
COPIER>DISPLAY>DPOT
1TR-DC-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHG-AC-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHG-AC-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Disofprimarytransfervoltage(Bk) TodisplaythevoltagelastlyappliedtothePrimaryTransfer Roller(Bk). Whentransferfailureoccursduetotheprimarytransfer 0to5000 V 300to4000 DisplayofprimarychargingACbias(Y) TodisplaytheprimarychargingACbiaslastlyappliedtothe PrimaryChargingRoller(Y). Whenthechargingfailureimageoccurs 0to3000 Vpp 1300to2000 DisplayofprimarychargingACbias(M) TodisplaytheprimarychargingACbiaslastlyappliedtothe PrimaryChargingRoller(M). Whenthechargingfailureimageoccurs 0to3000 Vpp 1300to2000 -
Disofprimarytransfervoltage(Y) TodisplaythevoltagelastlyappliedtothePrimaryTransfer Roller(Y). Whentransferfailureoccursduetotheprimarytransfer 0to5000 V 300to3000 Disofprimarytransfervoltage(M) TodisplaythevoltagelastlyappliedtothePrimaryTransfer Roller(M). Whentransferfailureoccursduetotheprimarytransfer 0to5000 V 300to3000 Disofprimarytransfervoltage(C) TodisplaythevoltagelastlyappliedtothePrimaryTransfer Roller(C). Whentransferfailureoccursduetotheprimarytransfer 0to5000 V 300to3000 -
8-78
8
COPIER>DISPLAY>DPOT
CHG-AC-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHG-AC-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPWR-Y Lv.2 Details
8-79
COPIER>DISPLAY>DPOT
LPWR-M Lv.2 Details Displayoflaserpower(M) TodisplayMlaserpowerdeterminedbyD-maxcontrol. FFdisplaywithlowimagedensityisconsideredthatthe PhotosensitiveDrummaybenearlytheendoflife. Whentheimagedensityislow 00-FF(hexadecimal) 60toFF Displayoflaserpower(C) TodisplayClaserpowerdeterminedbyD-maxcontrol. FFdisplaywithlowimagedensityisconsideredthatthe PhotosensitiveDrummaybenearlytheendoflife. Whentheimagedensityislow 00-FF(hexadecimal) 60toFF Displayoflaserpower(Bk) TodisplayBklaserpowerdeterminedbypotentialcontrol. FFdisplaywithlowimagedensityisconsideredthatthe PhotosensitiveDrummaybenearlytheendoflife. Whentheimagedensityislow 00-FF(hexadecimal) 60toFF -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisplayofprimarychargingACbias(C) TodisplaytheprimarychargingACbiaslastlyappliedtothe PrimaryChargingRoller(C). Whenthechargingfailureimageoccurs 0to3000 Vpp 1300to2000 DisplayofprimarychargingACbias(Bk) TodisplaytheprimarychargingACbiaslastlyappliedtothe PrimaryChargingRoller(Bk). Whenthechargingfailureimageoccurs 0to3000 Vpp 1300to2000 Displayoflaserpower(Y) TodisplayYlaserpowerdeterminedbyD-maxcontrol. FFdisplaywithlowimagedensityisconsideredthatthe PhotosensitiveDrummaybenearlytheendoflife. Whentheimagedensityislow 00toFF(hexadecimal) 60toFF -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPWR-C Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPWR-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-79
8
COPIER>DISPLAY>DPOT
PVCONT-Y Lv.2 Details
8-80
COPIER>DISPLAY>DPOT
PVCONT-C Lv.2 Details Disoftargetpatchcontrastpotntl(C) TodisplaythetargetCpatchcontrastpotential. Checkthetargetpatchcontrastpotentialtocheckwhether thetonersupplycontrolisproperlyexecutedatimagedensity failure. Investigatetheotherpossiblefactorsifthevalueiswithinthe defined range. Attheoccurrenceofanimagedensityfailure Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to255 V 20to120 Disoftargetpatchcontrastpotntl(Bk) TodisplaythetargetBkpatchcontrastpotential. Checkthetargetpatchcontrastpotentialtocheckwhether thetonersupplycontrolisproperlyexecutedatimagedensity failure. Investigatetheotherpossiblefactorsifthevalueiswithinthe defined range. Attheoccurrenceofanimagedensityfailure Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to255 V 20to120 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PVCONT-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Disoftargetpatchcontrastpotntl(Y) TodisplaythetargetY-patchcontrastpotential. Checkthetargetpatchcontrastpotentialtocheckwhether thetonersupplycontrolisproperlyexecutedatimagedensity failure. Investigatetheotherpossiblefactorsifthevalueiswithinthe defined range. Attheoccurrenceofanimagedensityfailure Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to255 V 20to120 Disoftargetpatchcontrastpotntl(M) TodisplaythetargetMpatchcontrastpotential. Checkthetargetpatchcontrastpotentialtocheckwhether thetonersupplycontrolisproperlyexecutedatimagedensity failure. Investigatetheotherpossiblefactorsifthevalueiswithinthe defined range. Attheoccurrenceofanimagedensityfailure Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to255 V 20to120 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PVCONT-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-80
8
COPIER>DISPLAY>DPOT
VRATE-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo VRATE-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo VRATE-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-81
COPIER>DISPLAY>DPOT
VRATE-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPGAIN-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPGAIN-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofD-maxPASCALBk-colorVdgainVL TodisplaythegainfortheBkVdsetbyD-maxPASCALcontrol againsttheenvironmenttablevalue. Whenimagedensityisnotappropriate -100to100 % DisofY-colorlaserpowergainvalue TodisplaythegainvalueofYlaserpowerbyD-maxcontrol. WhencheckingD-maxcontrolresults -100to100 % 0 COPIER>DISPLAY>DPOT>LPGAIN-M,LPGAIN-C DisofM-colorlaserpowergainvalue TodisplaygainvalueofMlaserpowerbyD-maxcontrol. WhencheckingD-maxcontrolresults -100to100 % 0 COPIER>DISPLAY>DPOT>LPGAIN-Y,LPGAIN-C -
DisplayofD-maxY-colorVdgainvalue TodisplaythegainvaluefortheYVdsetbyD-maxPASCAL/ D-maxcontrolagainsttheenvironmenttablevalue. Whentheimagedensityisnotappropriate -100to100 % DisplayofD-maxM-colorVdgainvalue TodisplaythegainfortheMVdsetbyD-maxPASCAL/D-max controlagainsttheenvironmenttablevalue. Whentheimagedensityisnotappropriate -100to100 % DisplayofD-maxC-colorVdgainvalue TodisplaythegainfortheCVdsetbyD-maxPASCAL/D-max controlagainsttheenvironmenttablevalue. Whenimagedensityisnotappropriate -100to100 % -
8-81
8
COPIER>DISPLAY>DPOT
LPGAIN-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-82 DENS
COPIER>DISPLAY>DENS
DENS-Y Lv.1 Details DisofYdeveloperdensitychangeratio TodisplaythedifferencebetweenY-colordeveloperdensityand thetargetvaluein%(percentage). IntolerabledifferencewilltriggerE020.Thismaybecausedby deteriorationofthedeveloper,failure/disconnectionoftheATR Sensororerrorintonersupplysystem. Thevalueisupdateduponprintoperationafterpower-on. Whenthedensitygreatly Whenthedensityisunstableevenaftergradationcorrection -7to7 % -4.5to4.5 COPIER>DISPLAY>DENS>SGNL-Y DisofMdeveloperdensitychangeratio TodisplaydifferencebetweenM-colordeveloperdensityandthe targetvaluein%(percentage). IntolerabledifferencewilltriggerE020.Thismaybecausedby deteriorationofthedeveloper,failure/disconnectionoftheATR Sensororerrorintonersupplysystem. Thevalueisupdateduponprintoperationafterpower-on. When the density greatly fluctuates Whenthedensityisunstableevenaftergradationcorrection -7to7 % -4.5to4.5 COPIER>DISPLAY>DENS>SGNL-M -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-M Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-82
8
COPIER>DISPLAY>DENS
DENS-C Lv.1 Details
8-83
COPIER>DISPLAY>DENS
DENS-S-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-S-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-S-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofATRcontrolpatchdensity(Y) TodisplayYpatchimagedensitycreatedbyATRcontrol. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 DisofATRcontrolpatchdensity(M) TodisplayMpatchimagedensitycreatedbyATRcontrol. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 DisofATRcontrolpatchdensity(C) TodisplayCpatchimagedensitycreatedbyATRcontrol. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-K Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofCdeveloperdensitychangeratio TodisplaydifferencebetweenC-colordeveloperdensityandthe targetvaluein%(percentage). IntolerabledifferencewilltriggerE020.Thismaybecausedby deteriorationofthedeveloper,failure/disconnectionoftheATR Sensororerrorintonersupplysystem. Thevalueisupdateduponprintoperationafterpower-on. When the density greatly fluctuates Whenthedensityisunstableevenaftergradationcorrection -7to7 % -4.5to4.5 COPIER>DISPLAY>DENS>SGNL-C DisofBkdeveloperdensitychangeratio TodisplaydifferencebetweenBk-colordeveloperdensityand thetargetvaluein%(percentage). IntolerabledifferencewilltriggerE020.Thismaybecausedby deteriorationofthedeveloper,failure/disconnectionoftheATR Sensororerrorintonersupplysystem. Thevalueisupdateduponprintoperationafterpower-on. When the density greatly fluctuates Whenthedensityisunstableevenaftergradationcorrection -7to7 % -4.5to4.5 COPIER>DISPLAY>DENS>SGNL-K -
8-83
8
COPIER>DISPLAY>DENS
DENS-S-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo D-Y-TRGT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo D-M-TRGT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-84
COPIER>DISPLAY>DENS
D-C-TRGT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REF-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REF-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofATRctrlCpatchtargetdensity TodisplaythetargetdensityforCpatchimagecreatedbyATR control. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 DisofYdeveloperdensitytargetvalue TodisplaythedeveloperdensitytargetvaluefortheATRSensor (Y). Whenanalyzingthecauseofaproblem 0to255 20to230 DisofMdeveloperdensitytargetvalue TodisplaythedeveloperdensitytargetvaluefortheATRSensor (M). Whenanalyzingthecauseofaproblem 0to255 20to230 -
DisofATRcontrolpatchdensity(Bk) TodisplayBkpatchimagedensitycreatedbyATRcontrol. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 DisofATRctrlYpatchtargetdensity TodisplaythetargetdensityforYpatchimagecreatedbyATR control. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 DisofATRctrlMpatchtargetdensity TodisplaythetargetdensityforMpatchimagecreatedbyATR control. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 300to700 -
8-84
8
COPIER>DISPLAY>DENS
REF-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REF-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-Y Lv.1 Details
8-85
COPIER>DISPLAY>DENS
SGNL-M Lv.1 Details DisplayofM-colordeveloperdensity TodisplaythemeasuredvalueofM-colordeveloperdensity. ThedensityismeasuredwiththeATRSensor(M)foreachjob. Thevalueisupdateduponprintoperationafterpower-on. Whenanalyzingthecauseofaproblem 0to255 20to230 COPIER>DISPLAY>DENS>DENS-M DisplayofC-colordeveloperdensity TodisplaythemeasuredvalueofC-colordeveloperdensity. ThedensityismeasuredwiththeATRSensor(C)foreachjob. Thevalueisupdateduponprintoperationafterpower-on. Whenanalyzingthecauseofaproblem 0to255 20to230 COPIER>DISPLAY>DENS>DENS-C DisplayofBk-colordeveloperdensity TodisplaythemeasuredvalueofBk-colordeveloperdensity. ThedensityismeasuredwiththeATRSensor(Bk)foreachjob. Thevalueisupdateduponprintoperationafterpower-on. Whenanalyzingthecauseofaproblem 0to255 20to230 COPIER>DISPLAY>DENS>DENS-K -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofCdeveloperdensitytargetvalue TodisplaythedeveloperdensitytargetvaluefortheATRSensor (C). Whenanalyzingthecauseofaproblem 0to255 20to230 DisofBkdeveloperdensitytargetvalue TodisplaythedeveloperdensitytargetvaluefortheATRSensor (Bk). Whenanalyzingthecauseofaproblem 0to255 20to230 DisplayofY-colordeveloperdensity TodisplaythemeasuredvalueofY-colordeveloperdensity. ThedensityismeasuredwiththeATRSensor(Y)foreachjob. Thevalueisupdateduponprintoperationafterpower-on. Whenanalyzingthecauseofaproblem 0to255 20to230 COPIER>DISPLAY>DENS>DENS-Y -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-C Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-K Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-85
8
COPIER>DISPLAY>DENS
P-SENS-P Lv.2 Details
8-86
COPIER>DISPLAY>DENS
DEV-DC-M Lv.2 Details Usecase DisofdevelopingDCvoltage(M) TodisplaythelatestMdevelopingDCvoltageVdc. Whenimagefailureoccursduetocarrieradherence Whenfoggingappears Whenfoggingisdeteriorated 280to480 V DisofdevelopingDCvoltage(C) TodisplaythelatestCdevelopingDCvoltageVdc. Whenimagefailureoccursduetocarrieradherence Whenfoggingappears Whenfoggingisdeteriorated 280to480 V DisofdevelopingDCvoltage(Bk) TodisplaythelatestBkdevelopingDCvoltageVdc. Whenimagefailureoccursduetocarrieradherence Whenfoggingappears Whenfoggingisdeteriorated 280to480 V -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DEV-DC-Y Lv.2 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisATRctrlbaselightintnsty(P-wave) To display the light intensity (P-wave) reflected from the base (ITB)atATRcontrol. IntolerablevaluesmaybecausedbyPatchSensor disconnection,LEDfailure,stainonSensorsurface,Shutter failure,RegistrationPatchShutterOpen/CloseSolenoidfailure, insufficient ITB cleaning, etc. WhencheckingthefailureofPatchSensor/ITBatlowdensity, foggingdeteriorationorE020display 0to1023 400to1000 COPIER>DISPLAY>DENS>P-SENS-S COPIER>FUNCTION>MISC-P>PT-LPADJ DisofdevelopingDCvoltage(Y) TodisplaythelatestYdevelopingDCvoltageVdc. Whenimagefailureoccursduetocarrieradherence Whenfoggingappears Whenfoggingisdeteriorated 280to480 V -
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DEV-DC-C Lv.2 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DEV-DC-K Lv.2 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-86
8
COPIER>DISPLAY>DENS
CHG-DC-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHG-DC-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHG-DC-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-87
COPIER>DISPLAY>DENS
CHG-DC-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo D-K-TRGT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo D-CRNT-P Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofPrychargeDCvoltg(Bk)&gainVL TodisplaythelatestoutputvalueofprimarychargingDCvoltage (Bk). Whenlowdensityorfoggingoccurs 0to1500 V 400to900 DisofATRctrlBkpatchtargetdensity TodisplaytheBkpatchimagetargetdensitycreatedbyATR control. Whenanalyzingthecauseofaproblem Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 340to640 340to640 DisofATRctrldarkcurrent(P-wave) Todisplaythedarkcurrentvalue(P-wave)measuredatATR control. WhencheckingthePatchSensor 0to1023 100orunder Dark current: current flowing when the Patch Sensor LED is OFF.
DisofprimarychargingDCvoltage(Y) TodisplaythelatestprimarychargingDCvoltageofYcolor. Whenlowdensityorfoggingoccurs 0to1500 V 400to900 DisofprimarychargingDCvoltage(M) TodisplaythelatestprimarychargingDCvoltageofMcolor. Whenlowdensityorfoggingoccurs 0to1500 V 400to900 DisofprimarychargingDCvoltage(C) TodisplaythelatestprimarychargingDCvoltageofCcolor. Whenlowdensityorfoggingoccurs 0to1500 V 400to900 -
8-87
8
COPIER>DISPLAY>DENS
D-CRNT-S Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-SENS-S Lv.2 Details
8-88
COPIER>DISPLAY>DENS
DENS-Y-H Lv.2 Details DisofATRctrlY-clrT/Dratiohistory Todisplaythelatest8Y-tonerdensitylogdata(T/Dratio) detectedbytheATRSensor(Y)atATRcontrol. SharpchangeinvaluesmayindicateATRSensordisconnection/ failure,whereasgradualchangeinvaluesmayindicatefailurein tonersupplysystem. WhencheckingtonerdensityintheDevelopingAssemblyatlow densityorfoggingdeterioration 0to255 20to230 DisofATRctrlM-clrT/Dratiohistory Todisplaythelatest8M-tonerdensitylogdata(T/Dratio) detectedbytheATRSensor(M)atATRcontrol. SharpchangeinvaluesmayindicateATRSensordisconnection/ failure,whereasgradualchangeinvaluesmayindicatefailurein tonersupplysystem. WhencheckingtonerdensityintheDevelopingAssemblyatlow densityorfoggingdeterioration 0to255 20to230 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofATRctrldarkcurrent(S-wave) Todisplaythedarkcurrentvalue(S-wave)measuredatATR control. WhencheckingthePatchSensor 0to1023 0to409 Dark current: current flowing when the Patch Sensor LED is OFF. DisATRctrlbaselightintnsty(S-wave) To display the light intensity (S-wave) reflected from the base (ITB)atATRcontrol. Intolerable values may be caused by insufficient ITB cleaning, etc. WhencheckingITBfailureatlowdensityorfoggingdeterioration 0to1023 10to400 COPIER>DISPLAY>DENS>P-SENS-P COPIER>FUNCTION>MISC-P>PT-LPADJ -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-M-H Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-88
8
COPIER>DISPLAY>DENS
DENS-C-H Lv.2 Details
8-89
COPIER>DISPLAY>DENS
DS-S-M-H Lv.2 Details DisofM-clrpatchimagedensityhistory Todisplaythelatest8M-patchimagedensitylogdata. ThisprovidescausejudgmentbasisforE020occurrence,etc. SharpchangeinvaluesmayindicatefailureinPatchSensor, Shutterorlaser,whereasgradualchangemayindicatefailurein tonersupplysystem. ThisisparticularlycausedbyPatchSensor. WhenanalyzingthecauseofE020 Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 200to900 DisofC-clrpatchimagedensityhistory Todisplaythelatest8C-patchimagedensitylogdata. ThisprovidescausejudgmentbasisforE020occurrence,etc. SharpchangeinvaluesmayindicatefailureinPatchSensor, Shutterorlaser,whereasgradualchangemayindicatefailurein tonersupplysystem. ThisisparticularlycausedbyPatchSensor. WhenanalyzingthecauseofE020 Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 200to900 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DS-S-Y-H Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofATRctrlC-clrT/Dratiohistory Todisplaythelatest8C-tonerdensitylogdata(T/Dratio) detectedbytheATRSensor(C)atATRcontrol. SharpchangeinvaluesmayindicateATRSensordisconnection/ failure,whereasgradualchangeinvaluesmayindicatefailurein tonersupplysystem. WhencheckingtonerdensityintheDevelopingAssemblyatlow densityorfoggingdeterioration 0to255 20to230 DisofY-clrpatchimagedensityhistory Todisplaythelatest8Y-patchimagedensitylogdata. ThisprovidescausejudgmentbasisforE020occurrence,etc. SharpchangeinvaluesmayindicatethefailureinPatchSensor, Shutterorlaser,whereasgradualchangemayindicatefailurein tonersupplysystem. ThisisparticularlycausedbyPatchSensor. WhenanalyzingthecauseofE020 Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 200to900 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DS-S-C-H Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-89
8
COPIER>DISPLAY>DENS
DS-S-K-H Lv.2 Details
8-90
COPIER>DISPLAY>DENS
SPL-LG-Y Lv.2 Details DisplayofYtonersupplyhistory Todisplaythelatest8Y-tonersupplylogdata. Eachdatarepresentsthenumberoftonerblockssuppliedper paper. WhencheckingtonersupplystatusatE020occurrence,low densityorfoggingdeterioration 0to4 0to4 DisplayofMtonersupplyhistory Todisplaythelatest8M-tonersupplylogdata. Eachdatarepresentsthenumberoftonerblockssuppliedper paper. WhencheckingtonersupplystatusatE020occurrence,low densityorfoggingdeterioration 0to4 0to4 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-LED-DA Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisBkclrpatchimagedensityhistory Todisplaythelatest8Bk-patchimagedensitylogdata. ThisprovidescausejudgmentbasisforE020occurrence,etc. SharpchangeinvaluesmayindicatefailureinPatchSensor, Shutterorlaser,whereasgradualchangemayindicatefailurein tonersupplysystem. ThisisparticularlycausedbyPatchSensor. WhenanalyzingthecauseofE020 Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 200to900 DisofPatchSensorLEDlightintensity TodisplaythePatchSensorLEDintensity. ThestainonSensorwindoworsoiledITB(ITBcleaningfailure) issuspectedifthebackgroundlightintensity(P-wave)istoolow even with sufficient LED intensity and PT-LPADJ execution will notcorrecttheproblem. WhencheckingthePatchSensor COPIER>DISPLAY>DENS>P-SENS-P -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SPL-LG-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-90
8
COPIER>DISPLAY>DENS
SPL-LG-C Lv.2 Details
8-91
COPIER>DISPLAY>DENS
SPL-LG-K Lv.2 Details DisplayofBktonersupplyhistory Todisplaythelatest8Bk-tonersupplylogdata. Eachdatarepresentsthenumberoftonerblockssuppliedper paper. Whencheckingthetonersupplystatusatlowdensityorfogging deterioration 0to5 0to5 DisofATRSensor(M)controlvoltage TodisplaythedensitydetectioncontrolvoltageoftheATR Sensor(M)atinitialization. WhencheckingbeforeclearingRAMdata 32to68 V 32to68 COPIER>ADJUST>DENS>CONT-M DisofATRSensor(Y)controlvoltage TodisplaythedensitydetectioncontrolvoltageoftheATR Sensor(Y)atinitialization. WhencheckingbeforeclearingRAMdata 32to68 V 32to68 COPIER>ADJUST>DENS>CONT-Y -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-K-H Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisplayofCtonersupplyhistory Todisplaythelatest8C-tonersupplylogdata. Eachdatarepresentsthenumberoftonerblockssuppliedper paper. WhencheckingtonersupplystatusatE020occurrence,low densityorfoggingdeterioration 0to4 0to4 DisofATRctrlBk-clrT/Dratiohistory Todisplaythelatest8Bk-tonerdensitylogdata(T/Dratio) detectedbytheATRSensor(Bk)atATRcontrol. SharpchangeofvaluesmayindicateATRSensordisconnection/ failure,whereasgradualchangemayindicatefailureintoner supplysystem. WhencheckingtonerdensityintheDevelopingAssemblyatlow densityorfoggingdeterioration 0to255 80to200 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONT-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONT-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-91
8
COPIER>DISPLAY>DENS
CONT-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONT-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-92 MISC
COPIER>DISPLAY>MISC
ENV-TR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Y-DRM-LF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo M-DRM-LF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Disofsecondarytransferenvironment Todisplaytheenvironment(moistureamount)ofsecondary transfer. Whencheckingthecurrentinstallationenvironmentofthe machine 1to3 1to3 DisplayofYDrumUnitdrumcounter TodisplaythetotalchargingtimeoftheDrumUnit(Y). WhencheckingthelifeoftheDrumUnit 0to10000000 100msec 0 DisplayofMDrumUnitdrumcounter TodisplaythetotalchargingtimeoftheDrumUnit(M). WhencheckingthelifeoftheDrumUnit 0to10000000 100msec 0 -
DisofATRSensor(C)controlvoltage TodisplaythedensitydetectioncontrolvoltageoftheATR Sensor(C)atinitialization. WhencheckingbeforeclearingRAMdata 32to68 V 32to68 COPIER>ADJUST>DENS>CONT-C DisofATRSensor(Bk)controlvoltage TodisplaythedensitydetectioncontrolvoltageoftheATR Sensor(Bk)atinitialization. WhencheckingbeforeclearingRAMdata 32to68 V 32to68 COPIER>ADJUST>DENS>CONT-K T-8-10
8-92
8
COPIER>DISPLAY>MISC
C-DRM-LF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo K-DRM-LF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPOWER-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-93
COPIER>DISPLAY>MISC
LPOWER-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPOWER-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPOWER-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Displayoflaserlightintensity(M) TodisplaytheMlaserintensityinreal-time. Whenanalyzingthecauseoftheimagedensityfailure Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 00toFF Hex.(hexadecimal) 50toFF Displayoflaserlightintensity(C) TodisplaytheClaserintensityinreal-time. Whenanalyzingthecauseoftheimagedensityfailure Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 00toFF Hex.(hexadecimal) 50toFF Displayoflaserlightintensity(Bk) TodisplaytheBklaserintensityinreal-time. Whenanalyzingthecauseoftheimagedensityfailure Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 00toFF Hex.(hexadecimal) 50toFF T-8-11
DisplayofCDrumUnitdrumcounter TodisplaythetotalchargingtimeoftheDrumUnit(C). WhencheckingthelifeoftheDrumUnit 0to10000000 100msec 0 DisplayofBkDrumUnitdrumcounter TodisplaythetotalchargingtimeoftheDrumUnit(Bk). WhencheckingthelifeoftheDrumUnit 0to10000000 100msec 0 Displayoflaserlightintensity(Y) TodisplaytheYlaserintensityinreal-time. Whenanalyzingthecauseoftheimagedensityfailure Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 00toFF Hex.(hexadecimal) 50toFF -
8-93
8
ALARM-1
COPIER>DISPLAY>ALARM-1
SUC-A-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUC-A-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUC-A-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ForR&Duse ForR&Duse ForR&Duse -
8-94
COPIER>DISPLAY>ALARM-1
SUC-A-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUC-L-Y Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUC-L-M Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ForR&Duse ForR&Duse ForR&Duse -
8-94
8
COPIER>DISPLAY>ALARM-1
SUC-L-C Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LST-DY-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ForR&Duse ForR&Duse -
8-95 HT-C
COPIER>DISPLAY>HT-C
TGT-A-Y Lv.2 Details DisofARCDATscreenAY-colortargetVL TodisplaytheY-patchtargetvalueofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 DisofARCDATscreenAM-colortargetVL TodisplaytheM-patchtargetvalueofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-M Lv.2 Details
T-8-12
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-95
8
COPIER>DISPLAY>HT-C
TGT-A-C Lv.2 Details
8-96
COPIER>DISPLAY>HT-C
TGT-B-Y Lv.2 Details DisofARCDATscreenBY-colortargetVL TodisplaytheY-patchtargetvalueofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 DisofARCDATscreenBM-colortargetVL TodisplaytheM-patchtargetvalueofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenAC-colortargetVL TodisplaytheC-patchtargetvalueofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 DisofARCDATscreenABk-clrtargetVL TodisplaytheBk-patchtargetvalueofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-96
8
COPIER>DISPLAY>HT-C
TGT-B-C Lv.2 Details
8-97
COPIER>DISPLAY>HT-C
TGT-C-Y Lv.2 Details DisofARCDATscreenCY-colortargetVL TodisplaytheY-patchtargetvalueofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 DisofARCDATscreenCM-colortargetVL TodisplaytheM-patchtargetvalueofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenBC-colortargetVL TodisplaytheC-patchtargetvalueofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 DisofARCDATscreenBBk-clrtargetVL TodisplaytheBk-patchtargetvalueofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-97
8
COPIER>DISPLAY>HT-C
TGT-C-C Lv.2 Details
8-98
COPIER>DISPLAY>HT-C
SUM-A-Y Lv.2 Details DisARCDATscreenAY-colorctrldiffer TodisplayY-patchcontroldifferenceofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenAM-colorctrldiffer TodisplayM-patchcontroldifferenceofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenCC-colortargetVL TodisplaytheC-patchtargetvalueofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 DisofARCDATscreenCBk-clrtargetVL TodisplaytheBk-patchtargetvalueofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset thetargetvalue).CheckthePatchSensorifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-98
8
COPIER>DISPLAY>HT-C
SUM-A-C Lv.2 Details
8-99
COPIER>DISPLAY>HT-C
SUM-B-Y Lv.2 Details DisARCDATscreenBY-colorctrldiffer TodisplayY-patchcontroldifferenceofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenBM-colorctrldiffer TodisplayM-patchcontroldifferenceofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenAC-colorctrldiffer TodisplayC-patchcontroldifferenceofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenABk-colorctrldiffer TodisplayBk-patchcontroldifferenceofscreenAinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-99
8
COPIER>DISPLAY>HT-C
SUM-B-C Lv.2 Details
8-100
COPIER>DISPLAY>HT-C
SUM-C-Y Lv.2 Details DisARCDATscreenCY-colorctrldiffer TodisplayY-patchcontroldifferenceofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenCM-colorctrldiffer TodisplayM-patchcontroldifferenceofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenBC-colorctrldiffer TodisplayC-patchcontroldifferenceofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenBBk-colorctrldiffer TodisplayBk-patchcontroldifferenceofscreenBinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-100
8
COPIER>DISPLAY>HT-C
SUM-C-C Lv.2 Details
8-101
COPIER>DISPLAY>HT-C
SGNL-A-Y Lv.2 Details DisARCDATscreenAY-patchcurrentVL TodisplaythecurrentY-patchvalueofscreenAinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenAM-patchcurrentVL TodisplaythecurrentM-patchvalueofscreenAinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenCC-colorctrldiffer TodisplayC-patchcontroldifferenceofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisARCDATscreenCBk-colorctrldiffer TodisplayBk-patchcontroldifferenceofscreenCinARCDAT control. Whenhuevariationoccursandthedisplayedvalueisnotinthe tolerablerange,executetheautogradationadjustment(reset targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-A-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-101
8
COPIER>DISPLAY>HT-C
SGNL-A-C Lv.2 Details
8-102
COPIER>DISPLAY>HT-C
SGNL-B-Y Lv.2 Details DisARCDATscreenBY-patchcurrentVL TodisplaythecurrentY-patchvalueofscreenBinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenBM-patchcurrentVL TodisplaythecurrentM-patchvalueofscreenBinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-A-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenAC-patchcurrentVL TodisplaythecurrentC-patchvalueofscreenAinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenABk-patchcurrentVL TodisplaythecurrentBk-patchvalueofscreenAinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-B-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-102
8
COPIER>DISPLAY>HT-C
SGNL-B-C Lv.2 Details
8-103
COPIER>DISPLAY>HT-C
SGNL-C-Y Lv.2 Details DisARCDATscreenCY-patchcurrentVL TodisplaythecurrentY-patchvalueofscreenCinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenCM-patchcurrentVL TodisplaythecurrentM-patchvalueofscreenCinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-B-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenBC-patchcurrentVL TodisplaythecurrentC-patchvalueofscreenBinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenBBk-patchcurrentVL TodisplaythecurrentBk-patchvalueofscreenBinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-C-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-103
8
COPIER>DISPLAY>HT-C
SGNL-C-K Lv.2 Details
8-104
COPIER>DISPLAY>HT-C
DLTA-A-Y Lv.2 Details DisofARCDATscreenAY-densitydiffer TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenAM-densitydiffer TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-C-C Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisARCDATscreenCBk-patchcurrentVL TodisplaythecurrentBk-patchvalueofscreenCinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 DisARCDATscreenCC-patchcurrentVL TodisplaythecurrentC-patchvalueofscreenCinARCDAT control. Whenhuevariationoccursorthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-A-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-104
8
COPIER>DISPLAY>HT-C
DLTA-A-C Lv.2 Details
8-105
COPIER>DISPLAY>HT-C
DLTA-B-Y Lv.2 Details DisofARCDATscreenBY-densitydiffer TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenBM-densitydiffer TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-A-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenAC-densitydiffer TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenABk-densitydiffer TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-B-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-105
8
COPIER>DISPLAY>HT-C
DLTA-B-C Lv.2 Details
8-106
COPIER>DISPLAY>HT-C
DLTA-C-Y Lv.2 Details DisofARCDATscreenCY-densitydiffer TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenCM-densitydiffer TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-B-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenBC-densitydiffer TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenBBk-densitydiffer TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-C-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-106
8
COPIER>DISPLAY>HT-C
DLTA-C-C Lv.2 Details
8-107
COPIER>DISPLAY>HT-C
TGT-A-Y2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-M2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-C2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ARCDATscrnAY-clrtargetVL(1/2SPD) TodisplaytheY-patchtargetvalueofscreenAinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnAM-clrtargetVL(1/2SPD) TodisplaytheM-patchtargetvalueofscreenAinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnAC-clrtargetVL(1/2SPD) TodisplaytheC-patchtargetvalueofscreenAinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLTA-C-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DisofARCDATscreenCC-densitydiffer TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 DisofARCDATscreenCBk-densitydiffer TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrol. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
8-107
8
COPIER>DISPLAY>HT-C
TGT-A-K2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-Y3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-M3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-108
COPIER>DISPLAY>HT-C
TGT-A-C3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-A-K3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-Y3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ARCDATscrnAC-colortargetVL(1/3SPD) TodisplaytheC-patchtargetvalueofscreenAinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnABk-clrtargetVL(1/3SPD) TodisplaytheBk-patchtargetvalueofscreenAinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnBY-colortargetVL(1/3SPD) TodisplaytheY-patchtargetvalueofscreenBinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
ARCDATscrnABk-clrtargetVL(1/2SPD) TodisplaytheBk-patchtargetvalueofscreenAinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnAY-colortargetVL(1/3SPD) TodisplaytheY-patchtargetvalueofscreenAinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnAM-colortargetVL(1/3SPD) TodisplaytheM-patchtargetvalueofscreenAinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
8-108
8
COPIER>DISPLAY>HT-C
TGT-B-M3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-C3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-K3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-109
COPIER>DISPLAY>HT-C
TGT-B-Y2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-M2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-B-C2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ARCDATscrnBY-colortargetVL(1/2SPD) TodisplaytheY-patchtargetvalueofscreenBinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnBM-colortargetVL(1/2SPD) TodisplaytheM-patchtargetvalueofscreenBinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnBC-colortargetVL(1/2SPD) TodisplaytheC-patchtargetvalueofscreenBinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
ARCDATscrnBM-colortargetVL(1/3SPD) TodisplaytheM-patchtargetvalueofscreenBinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnBC-colortargetVL(1/3SPD) TodisplaytheC-patchtargetvalueofscreenBinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnBBk-clrtargetVL(1/3SPD) TodisplaytheBk-patchtargetvalueofscreenBinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
8-109
8
COPIER>DISPLAY>HT-C
TGT-B-K2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-Y2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-M2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-110
COPIER>DISPLAY>HT-C
TGT-C-C2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-K2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-Y3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ARCDATscrnCC-colortargetVL(1/2SPD) TodisplaytheC-patchtargetvalueofscreenCinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCBk-clrtargetVL(1/2SPD) TodisplaytheBk-patchtargetvalueofscreenCinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCY-colortargetVL(1/3SPD) TodisplaytheY-patchtargetvalueofscreenCinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
ARCDATscrnBBk-clrtargetVL(1/2SPD) TodisplaytheBk-patchtargetvalueofscreenBinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCY-colortargetVL(1/2SPD) TodisplaytheY-patchtargetvalueofscreenCinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCM-colortargetVL(1/2SPD) TodisplaytheM-patchtargetvalueofscreenCinARCDAT controlat1/2speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
8-110
8
COPIER>DISPLAY>HT-C
TGT-C-M3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-C3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TGT-C-K3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-111
COPIER>DISPLAY>HT-C
SUM-A-Y2 Lv.2 Details ARCDATscrnAY-clrctrldiffer(1/2SPD) TodisplayY-patchcontroldifferenceofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnAM-clrctrldiffer(1/2SPD) TodisplayM-patchcontroldifferenceofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
ARCDATscrnCM-colortargetVL(1/3SPD) TodisplaytheM-patchtargetvalueofscreenCinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCC-colortargetVL(1/3SPD) TodisplaytheC-patchtargetvalueofscreenCinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 ARCDATscrnCBk-clrtargetVL(1/3SPD) TodisplaytheBk-patchtargetvalueofscreenCinARCDAT controlat1/3speed. WhencheckingARCDATcontroloperation Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0to700 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-111
8
COPIER>DISPLAY>HT-C
SUM-A-C2 Lv.2 Details
8-112
COPIER>DISPLAY>HT-C
SUM-B-Y2 Lv.2 Details ARCDATscrnBY-clrctrldiffer(1/2SPD) TodisplayY-patchcontroldifferenceofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBM-clrctrldiffer(1/2SPD) TodisplayM-patchcontroldifferenceofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-clrctrldiffer(1/2SPD) TodisplayC-patchcontroldifferenceofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnABk-clrctrldiffer(1/2SPD) TodisplayBk-patchcontroldifferenceofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-112
8
COPIER>DISPLAY>HT-C
SUM-B-C2 Lv.2 Details
8-113
COPIER>DISPLAY>HT-C
SUM-C-Y2 Lv.2 Details ARCDATscrnCY-clrctrldiffer(1/2SPD) TodisplayY-patchcontroldifferenceofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCM-clrctrldiffer(1/2SPD) TodisplayM-patchcontroldifferenceofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-clrctrldiffer(1/2SPD) TodisplayC-patchcontroldifferenceofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBBk-clrctrldiffer(1/2SPD) TodisplayBk-patchcontroldifferenceofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-113
8
COPIER>DISPLAY>HT-C
SUM-C-C2 Lv.2 Details
8-114
COPIER>DISPLAY>HT-C
DLT-A-Y2 Lv.2 Details ARCDATscrnAY-densitydiffer(1/2SPD) TodisplaythedifferencebetweenY-patchtargetvalueandthe currentvalueofscreenAinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnAM-densitydiffer(1/2SPD) TodisplaythedifferencebetweenM-patchtargetvalueandthe currentvalueofscreenAinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-clrctrldiffer(1/2SPD) TodisplayC-patchcontroldifferenceofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCBk-clrctrldiffer(1/2SPD) TodisplayBk-patchcontroldifferenceofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-A-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-114
8
COPIER>DISPLAY>HT-C
DLT-A-C2 Lv.2 Details
8-115
COPIER>DISPLAY>HT-C
DLT-B-Y2 Lv.2 Details ARCDATscrnBY-densitydiffer(1/2SPD) TodisplaythedifferencebetweenY-patchtargetvalueandthe currentvalueofscreenBinARCDATcontrolat1/2speed Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBM-densitydiffer(1/2SPD) TodisplaythedifferencebetweenM-patchtargetvalueandthe currentvalueofscreenBinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-A-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-densitydiffer(1/2SPD) TodisplaythedifferencebetweenC-patchtargetvalueandthe currentvalueofscreenAinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnABk-densitydiffer(1/2SPD) TodisplaythedifferencebetweenBk-patchtargetvalueandthe currentvalueofscreenAinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-B-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-115
8
COPIER>DISPLAY>HT-C
DLT-B-C2 Lv.2 Details
8-116
COPIER>DISPLAY>HT-C
DLT-C-Y2 Lv.2 Details ARCDATscrnCY-densitydiffer(1/2SPD) TodisplaythedifferencebetweenY-patchtargetvalueandthe currentvalueofscreenCinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCM-densitydiffer(1/2SPD) TodisplaythedifferencebetweenM-patchtargetvalueandthe currentvalueofscreenCinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-B-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-densitydiffer(1/2SPD) TodisplaythedifferencebetweenC-patchtargetvalueandthe currentvalueofscreenBinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBBk-densitydiffer(1/2SPD) TodisplaythedifferencebetweenBk-patchtargetvalueandthe currentvalueofscreenBinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-C-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-116
8
COPIER>DISPLAY>HT-C
DLT-C-C2 Lv.2 Details
8-117
COPIER>DISPLAY>HT-C
SGL-A-Y2 Lv.2 Details ARCDATscrnAY-patchcurrentVL(1/2SPD) TodisplaythecurrentY-patchvalueofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnAM-patchcurrentVL(1/2SPD) TodisplaythecurrentM-patchvalueofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-C-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-densitydiffer(1/2SPD) TodisplaythedifferencebetweenC-patchtargetvalueandthe currentvalueofscreenCinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCBk-densitydiffer(1/2SPD) TodisplaythedifferencebetweenBk-patchtargetvalueandthe currentvalueofscreenCinARCDATcontrolat1/2speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resetthe targetvalue).CheckthePatchSensororreplacethedeveloper ifnotcorrected. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-A-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-117
8
COPIER>DISPLAY>HT-C
SGL-A-C2 Lv.2 Details
8-118
COPIER>DISPLAY>HT-C
SGL-B-Y2 Lv.2 Details ARCDATscrnBY-patchcurrentVL(1/2SPD) TodisplaythecurrentY-patchvalueofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnBM-patchcurrentVL(1/2SPD) TodisplaythecurrentM-patchvalueofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-A-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-patchcurrentVL(1/2SPD) TodisplaythecurrentC-patchvalueofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnABkptchcurrentVL(1/2SPD) TodisplaythecurrentBk-patchvalueofscreenAinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-B-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-118
8
COPIER>DISPLAY>HT-C
SGL-B-C2 Lv.2 Details
8-119
COPIER>DISPLAY>HT-C
SGL-C-Y2 Lv.2 Details ARCDATscrnCY-patchcurrentVL(1/2SPD) TodisplaythecurrentY-patchvalueofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnCM-patchcurrentVL(1/2SPD) TodisplaythecurrentM-patchvalueofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-B-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-patchcurrentVL(1/2SPD) TodisplaythecurrentC-patchvalueofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnBBkpatchcurrentVL(1/2SPD) TodisplaythecurrentBk-patchvalueofscreenBinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-C-M2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-119
8
COPIER>DISPLAY>HT-C
SGL-C-C2 Lv.2 Details
8-120
COPIER>DISPLAY>HT-C
SUM-A-Y3 Lv.2 Details ARCDATscrnAY-clrctrldiffer(1/3SPD) TodisplayY-patchcontroldifferenceofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnAM-clrctrldiffer(1/3SPD) TodisplayM-patchcontroldifferenceofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-C-K2 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-patchcurrentVL(1/2SPD) TodisplaythecurrentC-patchvalueofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnCBkpatchcurrentVL(1/2SPD) TodisplaythecurrentBk-patchvalueofscreenCinARCDAT controlat1/2speed. Whenhuevariationoccursandthevalueshownisnotin thetolerablerange,checkthePatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-120
8
COPIER>DISPLAY>HT-C
SUM-A-C3 Lv.2 Details
8-121
COPIER>DISPLAY>HT-C
SUM-B-Y3 Lv.2 Details ARCDATscrnBY-clrctrldiffer(1/3SPD) TodisplayY-patchcontroldifferenceofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBM-clrctrldiffer(1/3SPD) TodisplayM-patchcontroldifferenceofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-A-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-clrctrldiffer(1/3SPD) TodisplayC-patchcontroldifferenceofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnABk-clrctrldiffer(1/3SPD) TodisplayBk-patchcontroldifferenceofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-121
8
COPIER>DISPLAY>HT-C
SUM-B-C3 Lv.2 Details
8-122
COPIER>DISPLAY>HT-C
SUM-C-Y3 Lv.2 Details ARCDATscrnCY-clrctrldiffer(1/3SPD) TodisplayY-patchcontroldifferenceofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCM-clrctrldiffer(1/3SPD) TodisplayM-patchcontroldifferenceofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-B-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-clrctrldiffer(1/3SPD) TodisplayC-patchcontroldifferenceofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBBk-clrctrldiffer(1/3SPD) TodisplayBk-patchcontroldifferenceofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-122
8
COPIER>DISPLAY>HT-C
SUM-C-C3 Lv.2 Details
8-123
COPIER>DISPLAY>HT-C
DLT-A-Y3 Lv.2 Details ARCDATscrnAY-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnAM-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SUM-C-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-clrctrldiffer(1/3SPD) TodisplayC-patchcontroldifferenceofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCBk-clrctrldiffer(1/3SPD) TodisplayBk-patchcontroldifferenceofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensororreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-A-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-123
8
COPIER>DISPLAY>HT-C
DLT-A-C3 Lv.2 Details
8-124
COPIER>DISPLAY>HT-C
DLT-B-Y3 Lv.2 Details ARCDATscrnBY-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBM-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-A-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnABk-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenAinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-B-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-124
8
COPIER>DISPLAY>HT-C
DLT-B-C3 Lv.2 Details
8-125
COPIER>DISPLAY>HT-C
DLT-C-Y3 Lv.2 Details ARCDATscrnCY-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheY-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCM-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheM-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-B-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnBBk-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenBinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-C-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-125
8
COPIER>DISPLAY>HT-C
DLT-C-C3 Lv.2 Details
8-126
COPIER>DISPLAY>HT-C
SGL-A-Y3 Lv.2 Details ARCDATscrnAY-patchcurrentVL(1/3SPD) TodisplaythecurrentY-patchvalueofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnAM-patchcurrentVL(1/3SPD) TodisplaythecurrentM-patchvalueofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DLT-C-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheC-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 ARCDATscrnCBk-densitydiffer(1/3SPD) TodisplaythedifferencebetweentheBk-patchtargetvalueand thecurrentvalueofscreenCinARCDATcontrolat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,executeautogradationadjustment(resettarget value).Ifnotcorrected,checkPatchSensorandreplacethe developer. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. -1023to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-A-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-126
8
COPIER>DISPLAY>HT-C
SGL-A-C3 Lv.2 Details
8-127
COPIER>DISPLAY>HT-C
SGL-B-Y3 Lv.2 Details ARCDATscrnBY-patchcurrentVL(1/3SPD) TodisplaythecurrentY-patchvalueofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnBM-patchcurrentVL(1/3SPD) TodisplaythecurrentM-patchvalueofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-A-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnAC-patchcurrentVL(1/3SPD) TodisplaythecurrentC-patchvalueofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnABkpatchcurrentVL(1/3SPD) TodisplaythecurrentBk-patchvalueofscreenAinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-B-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-127
8
COPIER>DISPLAY>HT-C
SGL-B-C3 Lv.2 Details
8-128
COPIER>DISPLAY>HT-C
SGL-C-Y3 Lv.2 Details ARCDATscrnCY-patchcurrentVL(1/3SPD) TodisplaythecurrentY-patchvalueofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnCM-patchcurrentVL(1/3SPD) TodisplaythecurrentM-patchvalueofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-B-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnBC-patchcurrentVL(1/3SPD) TodisplaythecurrentC-patchvalueofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnBBkpatchcurrentVL(1/3SPD) TodisplaythecurrentBk-patchvalueofscreenBinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-C-M3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-128
8
COPIER>DISPLAY>HT-C
SGL-C-C3 Lv.2 Details
8-129
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGL-C-K3 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ARCDATscrnCC-patchcurrentVL(1/3SPD) TodisplaythecurrentC-patchvalueofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 ARCDATscrnCBkpatchcurrentVL(1/3SPD) TodisplaythecurrentBk-patchvalueofscreenCinARCDAT controlat1/3speed. Whenhuevariationoccursandthevalueshownisnotinthe tolerablerange,checkPatchSensororreplacethedeveloper. Whenhuevariationoccurs Takenecessaryactioninaccordancewiththeinstructionsfrom theQualitySupportDivision. 0to1023 0 T-8-13
8-129
8
IO
MainDevice(DCON>P004to029)
Address
P004
8-130
Address
P006
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Third delivery flapper solenoid Fixingheatexhaustfan1,2_half speed Fixingcoolingfan(front),(rear) Secondarytransferexhaustfan _fullspeed Secondarytransferexhaustfan _halfspeed Processcartridgefan(front)_full speed Fixingdeliverymotor_I1 Shuttermotor_I1 -
Mark
SL7 FM10 FM1,FM2 FM5,FM6 FM8 FM8 FM10 M22 M22 M27 M27 M27 FM1,FM2
Remarks
1:ON 1:halfspeed 1:halfspeed 1:ON 1:fullspeed 1:halfspeed 1:fullspeed [I1:I0]=(00)0.88A,(01)0.62A( 10)0.51A,(11)0.09A 0:CW=OPEN1: CCW=CLOSE [I1:I0]=(00)0.40A,(01)0.30A( 10)0.22A,(11)0.09A 1:fullspeed
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Deliveryfan1connect Multi-purposepapersensor Duplexpapersensor Thirddeliverysensor Duplexinletsensor Seconddeliverysensor Reversesensor Firstdeliverysensor Lasershuttermotor_I1 -
Mark
FM7 PS47 PS38 PS43 PS40 PS42 PS39 PS41 M28 M28 M28 SL5 SL6 SL4
Remarks
0:connect 1:paper 1:paper 1:paper 1:paper 1:paper 1:paper 1:paper 0:CW1:CCW [I1:I0]=(00)0.40A,(01)0.30A( 10)0.22A,(11)0.09A 1:ON 1:ON 1:ON
P007
P005
8-130
8
Address
P008
8-131
Remarks Address
P010
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
DCinterlockswitch1,2 Seconddeliverytrayfullsensor Firstdeliverytrayfullsensor Lasershuttersensor Frontdoorsensor -
Mark
UN21 UN59 UN58 UN57 UN56 SW3,SW4 PS45 PS44 PS29 PS18 PS33 UN53 UN51 PS21 PS20 PS37 PS32 PS31 PS30 PS19
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Name
Deliveryfan2_fullspeed Deliveryfan2_halfspeed Cassette1pickupmotor_I1 Cassette2pickupmotor_I1 Cassette2pickupmotor_I0 Registrationmotor_I1 Multi-purposemotor_I1 Multi-purposefeedmotor_I1 -
Mark
FM9 FM9 M26 CL1 M16 M16 M17 M17 M19 M19 M18 M18 M20 M20
Remarks
1:fullspeed 1:halfspeed 1:ON 1:ON [I1:I0]=(00)1.01A,(01)0.79A( 10)0.51A,(11)0.09A [I1:I0]=(00)1.01A,(01)0.79A( 10)0.51A,(11)0.09A [I1:I0]=(00)1.10A,(01)0.84A( 10)0.62A,(11)0.09A [I1:I0]=(00)1.10A,(01)0.84A( 10)0.62A,(11)0.09A [I1:I0]=(00)1.10A,(01)0.84A( 10)0.62A,(11)0.09A
P009
1:bottle 0:new 0:new 0:new 0:new 1:DOOROPEN 0:full 0:full 1:HP 0:DOOROPEN 1:detect 1:detect 1:detect 0:DOOROPEN 0:DOOROPEN 1:paper 1:A4,K8,B4/B5,A4-R 0:LTR/LGL,EXE,LTR-R 1:HP 1:engage 0:DOOROPEN
P011
0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
8-131
8
Address
P012
8-132
Remarks Address
P014
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Fixingarchsensor2 Fixingarchsensor1 Fixinginletsensor -
Mark
PS36 PS35 PS34 1:paper 1:paper 1:paper -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Processcartridgefan(rear)_half speed Fixingmotor_CW Fixingmotor_ON First&Seconddeliverymotor_I1 Thirddeliverymotor_I1 Thirddeliverymotor_I0 Reverserollermotor_I1 Reverserollermotor_I0 -
Mark
FM4 M21 M21 FM4 M23 M23 M25 M25 M24 M24 M24 -
Remarks
0:halfspeed 0:CW1:CCW 0:OFF 1:OFF 0:fullspeed [I1:I0]=(00)1.16A,(01)0.89A( 10)0.66A,(11)0.09A [I1:I0]=(00)0.93A,(01)0.74A( 10)0.44A,(11)0.09A [I1:I0]=(00)0.72A,(01)0.51A( 10)0.39A,(11)0.09A 0:CW1:CCW -
P013
P015
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
8-132
8
Address
P016
8-133
Remarks Address
P018
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Cassette3sizeswitchB_7 Cassette3sizeswitchB_6 Cassette3sizeswitchB_5 Cassette3sizeswitchB_4 Cassette3sizeswitchA_3 Cassette3sizeswitchA_2 Cassette3papersensor Cassette3paperlevelsensorA Cassette3paperlevelsensorB Cassette3pre-registrationsensor Cassette4papersensor Cassette4paperlevelsensorA -
Mark
SW2 SW2 SW2 SW2 SW1 SW1 SW1 SW1 SW4 SW4 SW4 SW4 SW3 SW3 SW3 SW3 PS2 PS4 PS5 PS8 PS3 PS6 PS7 PS9 PS1 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Cassette3pickupmotor_I1 Cassette4pickupmotor_I1 M1 M1 M2
Mark
Remarks
(I1:I0)=(00)1.01A,(01)0.79A (10)0.51A,(11)0.09A (I1:I0)=(00)1.01A,(01)0.79A (10)0.51A,(11)0.09A 1:ON 1:ON Hi:CCW/Low:CW Hi:CCW/Low:CW -
P017
0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:paper 0:paper 0:paper 1:paper 0:paper 0:paper 0:paper 1:paper 0:DOOROPEN -
P019
M2 SL2 SL1 M1 M2 -
8-133
8
Address
P020
8-134
Remarks Address
P022
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Cassette1sizeswitchA Cassette1sizeswitchA Cassette1sizeswitchA Cassette1sizeswitchA Cassette1sizeswitchB Cassette1sizeswitchB Cassette1papersensor Cassette1paperlevelsensorA Cassette1paperlevelsensorB Cassette1pre-registrationsensor Cassette2papersensor Cassette2paperlevelsensorA -
Mark
SW6 SW6 SW6 SW6 SW7 SW7 SW7 SW7 SW8 SW8 SW8 SW8 SW9 SW9 SW9 SW9 PS49 PS51 PS52 PS55 PS50 PS53 PS54 PS56 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:detect 0:paper 0:paper 0:paper 1:paper 0:paper 0:paper 0:paper 1:paper -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
ITBsteeringsensor ITBdisplacementsensor1 ITBdisplacementsensor2 ITBdisplacementsensor3 ITBdisplacementsensor4 Primarytransferdetachment sensor1 -
Mark
PS24 PS25 PS26 PS27 PS28 PS22 PS23 SL3 SL2 -
Remarks
1:ON 1:ON 1:ON 1:ON 1:ON 0:engage 1:engage 1:ON 1:ON -
P021
P023
8-134
8
Address
P024
8-135
Remarks Address
P026
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Mark
1:close 1:close 1:close 1:close 1:close 1:HP 1:HP 1:HP 1:HP 1:toner 1:toner 1:toner 1:toner -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Primarytransferseparation motor_I1 ITBdisplacementcontrolmotor_I1 -
Mark
M15 M15 M15 M14 M14 M14 -
Remarks
[I1:I0]=(00)1.06A,(01)0.87A( 10)0.69A,(11)0.09A 0:CW1:CCW [I1:I0]=(00)0.74A,(01)0.66A( 10)0.24A,(11)0.09A 0:CW1:CCW -
P025
Tonercontaineroutercoversensor PS17 Tonercontainerinnercoversensor PS16 (Bk) Tonercontainerinnercoversensor PS15 (C) PS14 PS13 PS8 PS7 PS6 PS5 TS4 TS3 TS2 TS1 -
P027
8-135
8
Address
P028
8-136
Remarks
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Deckopensolenoid Deckliftermotor_lowerlimitsignal Deckliftermotor Decklifterlowerlimitsensing switch Decklifterupperlimitsensor Decklifterpositionsensor -
Mark
SL2D M2D M2D CL2D SL1D LE100D M1D SW2D PS3D PS4D PS1D PS9D SW1D PS7D PS2D PS6D PS5D -
P029
1:ON 1:ON 1:ON 1:ON 1:ON 1:ON 1:ON 1:lowerlimit 1:upperlimit 1:ON 1:paper 1:CLOSE 0:CLOSE 1:paper 0:nopaper 1:paper 1:conect T-8-14
ColorImageReaderUnit(RCON>P001to005)
Address
P001
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
P002
Name Originalsizesensor1 -
Mark CF1 -
Remarks 0:paper -
8-136
8
Address
P003
8-137
Remarks 1:error 1:error 0:OPEN1:CLOSE 0:OPEN1:CLOSE 0:paper (I0:I1)=(0,0)100%(0,1)75 %(1,0)50%(1,1)25% Address
P005
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
P004
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Mark M1 FM2 M1 M1
8-137
8
Address
P001
8-138
Address
P003
DuplexColorImageReaderUnit-B1(FEEDER>P001to007)
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Originalsizesensor1 Originalsizesensor2 Originalsizesensor3 Originalsizesensor4 Disengaginghomepositionsensor 1 Leadingedgepositionsensor Disengaginghomepositionsensor 2 Post-separationsensor3(feeder side) Delaysensor Glassshiftinghomeposition sensor Registrationsensor Readsensor1 Readsensor2 Deliverysensor
Mark
SR17 SR18 SR19 SR20 SR15 SR22 SR16 PCB2 SR4 SR11 PCB3 PCB4 SR5 PCB5 1:paper 1:paper 1:paper 1:paper 1:HP 1:paper 1:HP 0:paper 0:paper 0:HP 0:paper 0:paper 1:paper 0:paper
Remarks
Name
Papersurfacesensor TrayHPsensor Trayopen/closedsensor AB/ Inch identification sensor LTR-R/ LGL identification sensor Readmotorcoolingfanlock Scannerunitcoolingfanlock PickuprollerunitlifterHPsensor Post-separationsensor1 Post-separationsensor2 Originalsensor Coveropen/closedsensor
Mark
SR6 SR13 SR9 SR7 SR8 FM2 FM3 SR12 SR2 SR3 SR1 SR10
Remarks
1:upperlimit 1:HP(lowerlimit) 0:OPEN 0:LGL(LTRR),A5R1: A4R(A5),STMTR,B6 0:A4Randsmaller,1: LargerthanA4R 0:error 0:error 1:HP 0:paper 0:paper 1:paper 0:OPEN
P004
P002
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
8-138
8
Address
P005
8-139
Remarks Address
P007
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Disengagementmotor2 Disengagementmotor1 Trayliftermotor stampsolenoid Trayliftermotor_direction Feedmotor_direction Readmotor Registrationmotor Feedmotor Pickupmotor_direction Pickuprollerunitlifter motor_direction Readmotorcoolingfan Glassshiftmotor_direction Glassshiftmotor
Mark
M7 M6 M8 M8 M2 M4 M3 M2 M1 M10 FM2 M9 M9
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Deliverymotor_direction Deliverymotor Scannerunitcoolingfan Pickuprollerunitliftermotor
Mark
M5 M5 FM3 M10
Remarks
0:CW1:CCW 1:enable 1:ON 1:enable
T-8-16
P006
1:enable 1:enable 1:enable 1:ON 0:down1:up 0:nouse1:CW 1:enable 1:enable 1:enable 0:nouse1:CW 0:nouse1:CW 1:ON 0:HP1: 1:enable
8-139
8
Address
P001
8-140
Address
P003
ColorImageReaderUnit-B2(FEEDER>P001to006)
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Documentsetsensor Coveropen/closedsensor Documentwidthsensor1 -
Mark
SR5 SR6 SR12 0:papeer 1:OPEN 1:paper -
Remarks
Name
A4R/LTRR identification sensor Lastdocumentdetectionsensor Timingsensor Documentwidthsensor2 Documentwidthsensor3 Documentwidthsensor4 Deliveryreversalsensor ReleasemotorHPsensor Documentlengthsensor1 Documentlengthsensor2
Mark
SR10 SR9 SR4 SR13 SR14 SR15 SR3 SR11 SR7 SR8
Remarks
0:A4Randsmaller,1:Larger thanA4R 1:paper 1:paper 1:paper 1:paper 1:paper 1:paper 1:HP 1:paper 1:paper
P004
P002
8-140
8
Address
P005
8-141
Remarks
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Fan Pickupclutch Registrationclutch releasemotor_I0 releasemotor_I1 releasemotor Stampsolenoid ADFmotor_I0 ADFmotor_I1 ADFmotor ADFmotor_direction -
Mark
FM1 CL2 CL1 M2 M2 M2 SL2 M1 M1 M1 M1 -
P006
1:ON 1:ON 1:ON (I0:I1)Amperelarge(0,0)->(0 ,1)->(1,0)-> (I0:I1)Amperelarge(0,0)->(0 ,1)->(1,0)-> 1:enable 1:ON (I0:I1)Amperelarge(0,0)->(0 ,1)->(1,0)-> (I0:I1)Amperelarge(0,0)->(0 ,1)->(1,0)-> 1:enable 0:separate1:pickup T-8-17
InnerFinisher-A1(SORTER>P001toP014)
Address
P001
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Entrancesensor GripperunitHPsensor Gripperunitmovemotor_CW Paperleverdrivesolenoid Shiftmotor shiftrollerreleasemotor stoppermotor Gripperopen/closemotor
Mark
S1 S7 M2 SOL1 M4 M5 M6 M7
Remarks
0:ON1:OFF 0:ON1:OFF 0:CW1:CCW 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON
P002
8-141
8
Address
P003
8-142
Remarks Address
P005
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Feedmotor_CW Feedmotor_clock STPmovemotor_clock STPmovemotor_PWM Feedmotor_PWM Gripperunitmovemotor_PWM Additionaltrayclocksensor stacktrayclocksensor staplermoveHPsensor staplerHPsensor
Mark
M3 M3 M1 M1 M3 M2 S23 S14 S10 S18
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Mark
Remarks
0:ON1:OFF 0:ON1:OFF 0:ON1:OFF 0:OFF1:ON -
P004
0:CW1:CCW 1:output 1:output 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:ON1:OFF 0:ON1:OFF 0:ON1:OFF 0:ON1:OFF
P006
8-142
8
Address
P007
8-143
Remarks Address
P009
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Additionaltraypapersensor -
Mark
S22 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
stacktraypapersensor stacktraymiddlesensor -
Mark
S15 S16 -
Remarks
0:nopaper1:paper 1:mid/lowlevel -
P008
0:ON1:OFF -
P010
8-143
8
Address
P011
8-144
Remarks Address
P013
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Processingtraysensor Staplersafetyswitch Fan2 Fan1 papersurfacesensor2 papersurfacesensor1 stapleredgingsensor staplersensor Gripperstaplerconnectionsensor Frontcoverswitch
Mark
S6 SW2 M9 M8 S12 S11 S19 S20 S9 SW1
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 staplermotor Trayliftmotor -
Name
Mark
M10 M11 -
Remarks
0::ENABLE1:DISABLE 0::ENABLE1:DISABLE T-8-18
P012
0:nopaper1:paper 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:ON1:OFF 0:OFF1:ON 0:OFF1:ON
P014
8-144
8
toP031)
Address
P001
8-145
Address
P003
StapleFinisher-C1/BookletFinisher-C1(SORTER>P001,P007
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 -
Name
-
Mark
-
Remarks
Name
Tray2papersurfacesensor2 Frontcoversensor -
Mark
PI120 PI102 -
Remarks
0:paper1:nopaper 0:CLOSE1:OPEN -
P004
P002
8-145
8
Address
P005
8-146
Remarks Address
P007
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 -
Name
-
Mark
-
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Tray1shiftmotor_lock Frontcoversensor Inletsensor Swingguidehomepositionsensor -
Mark
M107 PI102 PI103 PI105 -
Remarks
0:OFF1:lock 0:CLOSE1:OPEN 0:paper1:nopaper 1:HP -
P006
P008
8-146
8
Address
P009
8-147
Remarks Address
P011
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Tray1papersurfacesensor Tray2shiftmotor_lock Tray1papersensor -
Mark
PI111 M108 PI112 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Swingheightsensor Gearchangehomepositionsensor Uppercoversensor Rearendassistguidehome positionsensor ProcessingTraysensor Rearaligningplatehomeposition sensor Frontaligningplatehomeposition sensor -
Mark
PI123 PI117 PI101 PI109 PI108 PI107 PI106 -
Remarks
0:CLOSE1:OPEN 0:HP 0:CLOSE1:OPEN 0:HP 0:paper1:nopaper 0:HP 0:HP -
P010
P012
8-147
8
Address
P013
8-148
Remarks Address
P015
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Tray2shiftmotor Tray2shiftmotor_CW Inletrollerseparationsolenoid Entrancefeedmotor_I1
Mark
M108 M108 SL101 M101
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Staplershiftmotor_enable Stackejectionmotor_CW Swingmotor_ampere Swingmotor_CW Rearaligningplatemotor Rearaligningplatemotor Frontaligningplatemotor_ampere Frontaligningplatemotor_CW -
Mark
M105 M102 M106 M106 M104 M104 M103 M103 -
Remarks
0:standby1:enable 0:CW1:CCW 0:High1:Low 0:CW1:CCW 0:CW1:CCW 0:High1:Low 0:High1:Low 0:CW1:CCW -
0:OFF1:ON 0:CW1:CCW 0:OFF1:ON [P013>1:P013>0][0:0]: Low,[0:1]:MID,[1:0]: High,[1:1]:Max 0:standby1:enable 0:CW1:CCW 0:OFF1:ON 0:standby1:enable [P014>3:P014>2][0:0]: Low,[0:1]:MID,[1:0]: High,[1:1]:Max 0:CW1:CCW -
P014
P016
8-148
8
Address
P017
8-149
Remarks Address
P019
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Stapleralignmentinterference sensor Shutterhomepositionsensor Tray2papersensor Staplershifthomepositionsensor Tray2papersurfacesensor1 Staplershiftmotor_CW Bufferrollerseparationsolenoid Shutterclutch Stackejectionlowerrollerclutch Bufferrearendholdingsolenoid 1stdeliveryrollerseparation solenoid Staplershiftmotor_I1
Mark
PI115 PI114 PI113 PI110 PI116 M105 SL102 CL101 CL102 SL104 SL103 M105
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Feedpathsensor StitcherHPsensor(rear) StitcherHPsensor(front) Alignmentplatehomeposition sensor Verticalpatpapersensor -
Mark
PI104 SW5 SW7 PI5 PI17 -
Remarks
0:paper1:nopaper 1:HP 1:HP 1:HP 0:nopaper1:paper -
0:paper1:nopaper 0:paper1:nopaper 0:HP 0:HP 0:Interference 0:CCW1:CW 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON [P018>1:P018>0][0:0]: Low,[0:1]:MID,[1:0]: High,[1:1]:Max
P018
P020
Staplershiftmotor_I0
M105
8-149
8
Address
P021
8-150
Remarks Address
P023
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Mark
0:edge 1:HP
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
No.2 paper deflecting solenoid No.1 paper deflecting solenoid Saddleinletsolenoid Paperfoldinghomepositionsensor -
Mark
SL2 SL1 SL5 PI21 -
Remarks
0:OFF1:ON 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON -
P022
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
P024
0:CCW1:CW
8-150
8
Address
P025
8-151
Remarks Address
P027
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Feedmotor Stitchermotor(rear)_CW Staplesensor(rear) -
Mark
M1 M6 SW4 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Name
Feedplatecontactsolenoid Paperfoldingmotor_RV Paperpositioning platepapersensor Paperpositioningplatehome positionsensor Traypapersensor Paperpushingplatemotor_EN Paperpushingplatemotor_FWM Paperpushingplatemotor_RV Paperfoldingmotor_FWD -
Mark
SL4 M2 PI8 PI7 PI6 M8 M8 M8 M2 -
Remarks
0:OFF1:ON 0:OFF1:ON 0:paper1:nopaper 0:HP 0:paper1:nopaper 0:ON1:OFF 0:OFF1:ON 0:OFF1:ON 0:OFF1:ON -
P026
P028
0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
8-151
8
Address
P029
8-152
Remarks Address
P031
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Stitchermotor(rear)_CCW Stitchermotor(front)_CW Stitchermotor(front)_CCW Staplesensor(front) -
Mark
M6 M7 M7 SW6 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Saddleinletsensor Guidehomepositionsensor Crescentrollerphasesensor Deliverysensor Inletcoversensor -
Mark
PI22 PI13 PI12 PI11 PI9 -
Remarks
0:nopaper1:paper 1:HP 1:HP 0:paper1:nopaper 0:CLOSE1:OPEN T-8-19
P030
8-152
8
P039)
Address
P013
8-153
Address
P033
External2HolePuncher-B1(SORTER>P013,P032toP036,
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Punchmotor_CW Punchmotor_CCW LEDPCB(Rearedgedirection) HorizontalregistrationHPsensor -
Mark
M61 M61 PCB3 PI61 -
Remarks
0:ON 0:ON 0:nopaper1:paper 1:HP -
Name
Punchfeedmotor_enable Punchfeedmotor_I1
Mark
M63 M63
Remarks
0:standby1:enable [P013>3:P013>2][0:0]=Low ,[0:1]=MID,[1:0]=High,[1:1]= Max 0:HP -
P034
P032
Punchfeedmotor_I0 PunchHPsensor -
M63 PI63 -
8-153
8
Address
P035
8-154
Remarks Address
P039
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Sideregistrationmotor_ampere Sideregistrationmotor_B Sideregistrationmotor_A -
Mark
M62 M62 M62 -
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name
Sideregistrationsensor1 ScrapfulldetectorPCB Upperdoorswitch Frontdoorswitch Sideregistrationsensor2 Sideregistrationsensor3 Sideregistrationsensor4 -
Mark
PCB2 PCB4 MSW61 MSW62 PCB2 PCB3 PCB3 -
Remarks
0:paper 0:paper 0:OPEN1:CLOSE 0:OPEN1:CLOSE 0:paper 0:paper 0:paper T-8-20
P036
8-154
8
COPIER
ADJUST
ADJ-XY
COPIER>ADJUST>ADJ-XY
ADJ-X Lv.1 Details
8-155
COPIER>ADJUST>ADJ-XY
ADJ-Y Lv.1 Details Adjofimgpstninbookmode:horzscan Toadjusttheimagereadingstartpositioninhorizontalscanning direction. WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Whenthenon-imagewidthislargerthanthestandardvalue,set thesmallervalue. Whenoutoforiginalareaiscopied,setthelargervalue. Asthevalueisincrementedby1,theimagepositionmovesto therearsideby0.1mm. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 36to236 0.1mm 136 AdjimgpstninDADFmode:horzscan[Frt] Toadjusttheimagereadingstartpositioninhorizontalscanning directionatDADFreading. WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthevalueisincrementedby1,theimagepositionmovesto therearsideby0.1mm. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 2to202 0.1mm 102 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjofimgpstninbookmode:vertscan Toadjusttheimagereadingstartposition(imageleadedge position)inverticalscanningdirection. WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Whenthenon-imagewidthislargerthanthestandardvalue,set thesmallervalue. Whenoutoforiginalareaiscopied,setthelargervalue. Asthevalueisincrementedby1,theimagepositionmovesto thetrailingedgesideby0.1mm. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 1to100 0.1mm 18 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-Y-DF Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-155
8
COPIER>ADJUST>ADJ-XY
STRD-POS Lv.1 Details
8-156
COPIER>ADJUST>ADJ-XY
ADJY-DF2 Lv.1 Details AdjimgpstninDADFmod:horizscan[bck] Toadjusttheimagepositionofbacksideinhorizontalscanning directionatsimultaneousduplexreading. WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthevalueisincrementedby1,theimagepositionmovesto therearsideby0.1mm. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 56to220 0.1mm 120 T-8-21
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-X-MG Lv.1 Details
Usecase Adj/set/operatemethod
AdjreadpstninDADFmode:frontside ToadjustthereadingpositionatDADFreading(frontside). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 1to200 0.1mm 110 COPIER>FUNCTION>INSTALL>STRD-POS Adjimgratioinbookmod:vertscan[frt] To make a fine adjustment of image magnification in vertical scanningdirectionatcopyboardreading. WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. As the value is incremented by 1, the image magnification changesby0.01%. +:Enlarge -:Reduce WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -50to50 0.01% 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-156
8
CCD
COPIER>ADJUST>CCD
W-PLT-X Lv.1 Details
8-157
COPIER>ADJUST>CCD
W-PLT-Z Lv.1 Details Whiteleveldata(Z)entryofwhiteplate WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel.WhenreplacingtheCopyboard Glass, enter the value of barcode label which is affixed on the glass. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 7500to9999 9418 COPIER.>ADJUST>CCD>W-PLT-X,W-PLT-Y,BW-TGT ShadingtgtVL(B&W)[bookmode]:D-Reader TosettheB&Wshadingtargetvalueincopyboardreading mode. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheScannerUnit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 1to2047 1126 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo W-PLT-Y Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Whiteleveldata(X)entryofwhiteplate WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel.WhenreplacingtheCopyboard Glass, enter the value of barcode label which is affixed on the glass. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 7500to9999 8271 COPIER.>ADJUST>CCD>W-PLT-Y,W-PLT-Z,BW-TGT Whiteleveldata(Y)entryofwhiteplate WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel.WhenreplacingtheCopyboard Glass, enter the value of barcode label which is affixed on the glass. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 7500to9999 8735 COPIER.>ADJUST>CCD>W-PLT-X,W-PLT-Z,BW-TGT -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SH-TRGT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-157
8
COPIER>ADJUST>CCD
100-RG Lv.1 Details
8-158
COPIER>ADJUST>CCD
DFTAR-R Lv.1 Details Shadingtargetvalue(R)[Frontside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paperfront), executeCOPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 andwritethevaluewhichisautomaticallysetintheservice label. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass/ScannerUnit(paper front) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1159 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 Shadingtargetvalue(G)[Frontside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paperfront), executeCOPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 andwritethevaluewhichisautomaticallysetintheservice label. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass/ScannerUnit(paper front) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1189 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 100-GB Lv.1 Details
Usecase Adj/set/operatemethod
ImgSensrRGcolordisplacecrrctVL:Frt Tocorrectthecolordisplacement(RandGlines)invertical scanningdirectionduetotheScannerUnit(paperfront). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -256to256 0.001line 0 ImgSensrGBcolordisplacecrrctVL:Frt Tocorrectthecolordisplacement(GandBlines)invertical scanningdirectionduetotheScannerUnit(paperfront). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -256to256 0.001line 0 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFTAR-G Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-158
8
COPIER>ADJUST>CCD
DFTAR-B Lv.1 Details
8-159
COPIER>ADJUST>CCD
MTF2-M2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue2setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue3setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue4setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Shadingtargetvalue(B)[Frontside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paperfront), executeCOPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 andwritethevaluewhichisautomaticallysetintheservice label. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass/ScannerUnit(paper front) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1209 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 MTFvalue1setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-159
8
COPIER>ADJUST>CCD
MTF2-M5 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M6 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M7 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-160
COPIER>ADJUST>CCD
MTF2-M8 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M9 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue8setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue9setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue1setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue5setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue6setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue7setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-160
8
COPIER>ADJUST>CCD
MTF2-S2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-161
COPIER>ADJUST>CCD
MTF2-S5 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S6 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S7 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue5setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue6setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue7setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue2setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue3setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue4setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-161
8
COPIER>ADJUST>CCD
MTF2-S8 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S9 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-162
COPIER>ADJUST>CCD
100DF2GB Lv.2 Details ImgSensrGBclrcrrctVL[bck]:D-Reader Tocorrectthecolordisplacement(GandBlines)invertical scanningdirectionduetotheScannerUnit(paperback). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -256to256 0.001line 0 ImgSensrRGclrcrrctVL[bck]:D-Reader Tocorrectthecolordisplacement(RandGlines)invertical scanningdirectionduetotheScannerUnit(paperback). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -256to256 0.001line 0 -
MTFvalue8setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue9setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 100DF2RG Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-162
8
COPIER>ADJUST>CCD
DFCH2R2 Lv.1 Details
8-163
COPIER>ADJUST>CCD
DFCH2B2 Lv.1 Details ComplexchartNo.2data(B)[Frontside] Toderivethefront/backsidelinearity,settheBluedata(for paperfront)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 ComplexchartNo.10data(B)[Frontside] Toderivethefront/backsidelinearity,settheBluedata(for paperfront)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFCH2R10 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ComplexchartNo.2data(R)[Frontside] Toderivethefront/backsidelinearity,settheReddata(forpaper front)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 ComplexchartNo.10data(R)[Frontside] Toderivethefront/backsidelinearity,settheReddata(forpaper front)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFCH2B10 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-163
8
COPIER>ADJUST>CCD
DFCH2G2 Lv.1 Details
8-164
COPIER>ADJUST>CCD
CCD-CHNG Lv.1 Details Scanner Unit(ppr frt) rplce flag setting To set the calculation mode of MTF filter coefficient that is used atthereplacementofScannerUnit(paperfront). WhenreplacingtheScannerUnit(paperfront),enter1.When replacingtheReaderControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheScannerUnit(paperfront) WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Dataatfactoryshipmentisused. 1:Dataatfactoryshipmentisnotused.(ScannerUnit(paper front)isalreadyreplaced.) 0 COPIER>ADJUST>CCD>MTFMCL,MTFSCL,MTFMBW, MTFSBW MTFvalue1setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFCH2G10 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ComplexchartNo.2data(G)[Frontside] Toderivethefront/backsidelinearity,settheGreendata(for paperfront)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 ComplexchartNo.10data(G)[Frontside] Toderivethefront/backsidelinearity,settheGreendata(for paperfront)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-164
8
COPIER>ADJUST>CCD
MTF-M2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-165
COPIER>ADJUST>CCD
MTF-M5 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M6 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M7 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue5setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue6setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue7setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue2setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue3setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue4setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-165
8
COPIER>ADJUST>CCD
MTF-M8 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M9 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-166
COPIER>ADJUST>CCD
MTF-S2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue2setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue3setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue4setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemai)npowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue8setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue9setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue1setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-166
8
COPIER>ADJUST>CCD
MTF-S5 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S6 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S7 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-167
COPIER>ADJUST>CCD
MTF-S8 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S9 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue8setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue9setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue5setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue6setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue7setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to80 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-167
8
COPIER>ADJUST>CCD
DFCH-R2 Lv.1 Details
8-168
COPIER>ADJUST>CCD
DFCH-B2 Lv.1 Details ComplexchartNo.2data(B)[Backside] Toderivethefront/backsidelinearity,settheBluedata(for paperback)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 COPIER>ADJUST>CCD>DFCH-R10,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR ComplexchartNo.10data(B)[Backside] Toderivethefront/backsidelinearity,settheBluedata(for paperback)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 COPIER>ADJUST>CCD>DFCH-R2,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR -
Relatedusermode Supplement/memo
ComplexchartNo.2data(R)[Backside] Toderivethefront/backsidelinearity,settheReddata(forpaper back)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 COPIER>ADJUST>CCD>DFCH-R10,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR ComplexchartNo.10data(R)[Backside] Toderivethefront/backsidelinearity,settheReddata(forpaper back)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 COPIER>ADJUST>CCD>DFCH-R2,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR -
Relatedusermode Supplement/memo
8-168
8
COPIER>ADJUST>CCD
DFCH-G2 Lv.1 Details
8-169
COPIER>ADJUST>CCD
MTF2-M10 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M11 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-M12 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue10setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue11setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue12setting:horzscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC -
Relatedusermode Supplement/memo
ComplexchartNo.2data(G)[Backside] Toderivethefront/backsidelinearity,settheGreendata(for paperback)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 COPIER>ADJUST>CCD>DFCH-R10,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR ComplexchartNo.10data(G)[Backside] Toderivethefront/backsidelinearity,settheGreendata(for paperback)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 COPIER>ADJUST>CCD>DFCH-R2,DFCH-B2,DFCH-B10, DFCH-G2,DFCH-G10 COPIER>FUNCTION>CCD>DF-LNR -
8-169
8
COPIER>ADJUST>CCD
MTF2-S10 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S11 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF2-S12 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-170
COPIER>ADJUST>CCD
MTF-M10 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M11 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-M12 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTFvalue10setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue11setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue12setting:horzscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC -
MTFvalue10setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue11setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue12setting:vertscan[Front] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC -
8-170
8
COPIER>ADJUST>CCD
MTF-S10 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S11 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTF-S12 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-171
COPIER>ADJUST>CCD
DFCH2K2 Lv.1 Details ComplexchartNo.2data(B&W)[Front] Toderivethefront/backsidelinearity,settheB&Wdata(for paperfront)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 ComplexchartNo.10data(B&W)[Front] Toderivethefront/backsidelinearity,settheB&Wdata(for paperfront)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 -
MTFvalue10setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue11setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC MTFvalue12setting:vertscan[Back] Setting value for MTF filter coefficient calculation. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 20to85 50 COPIER>FUNCTION>CCD>MTF-CLC -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFCH2K10 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-171
8
COPIER>ADJUST>CCD
DFCH-K2 Lv.1 Details
8-172
COPIER>ADJUST>CCD
DFTAR-BW Lv.1 Details Shadingtargetvalue(B&W)[Frontside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paperfront), executeCOPIER>FUNCTION>CCD>DF-WLVL3,DF-WLVL4 andwritethevaluewhichisautomaticallysetintheservice label. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass/ScannerUnit(paper front) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1209 COPIER>FUNCTION>CCD>DF-WLVL3,DF-WLVL4 Shadingtargetvalue(G)[Backside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paper back),executeCOPIER>FUNCTION>CCD>DF-WLVL1,DFWLVL2andwritethevaluewhichisautomaticallysetinthe servicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheScannerUnit(paperback) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1136 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 -
Relatedusermode Supplement/memo
ComplexchartNo.2data(B&W)[Back] Toderivethefront/backsidelinearity,settheB&Wdata(for paperback)ofNo.2imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to2550 2000 COPIER>ADJUST>CCD>DFCH-R2,DFCH-R10,DFCH-B2, DFCH-B10,DFCH-G2,DFCH-G10,DFCH-K10 COPIER>FUNCTION>CCD>DF-LNR ComplexchartNo.10data(B&W)[Back] Toderivethefront/backsidelinearity,settheB&Wdata(for paperback)ofNo.10imageinDADFcomplexchart. EnterthevalueofservicelabelontheReader. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2550 0 COPIER>ADJUST>CCD>DFCH-R2,DFCH-R10,DFCH-B2, DFCH-B10,DFCH-G2,DFCH-G10,DFCH-K2 COPIER>FUNCTION>CCD>DF-LNR -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFTBK-G Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-172
8
COPIER>ADJUST>CCD
DFTBK-B Lv.1 Details
8-173
COPIER>ADJUST>CCD
CCD-CHG2 Lv.1 Details Scanner Unit(paper back) rplce flag set To set the calculation mode of MTF filter coefficient that is used atthereplacementofScannerUnit(paperback). WhenreplacingtheScannerUnit(paperback),enter1.When replacingtheReaderControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheScannerUnit(paperback) WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Dataatfactoryshipmentisused. 1:Dataatfactoryshipmentisnotused.(ScannerUnit(paper back)isalreadyreplaced.) 0 COPIER>ADJUST>CCD>MTF2MCL,MTF2SCL,MTF2MBW, MTF2SBW Shadingtargetvalue(B&W)[Backside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paper back),executeCOPIER>FUNCTION>CCD>DF-WLVL3,DFWLVL4andwritethevaluewhichisautomaticallysetinthe servicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheCopyboardGlass/ScannerUnit(paper back) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1126 COPIER>FUNCTION>CCD>DF-WLVL3,DF-WLVL4 T-8-22
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFTBK-R Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Shadingtargetvalue(B)[Backside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paper back),executeCOPIER>FUNCTION>CCD>DF-WLVL1,DFWLVL2andwritethevaluewhichisautomaticallysetinthe servicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheScannerUnit(paperback) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1126 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 Shadingtargetvalue(R)[Backside] WhenreplacingtheReaderControllerPCB,enterthevalueof servicelabel. WhenreplacingtheCopyboardGlass/ScannerUnit(paper back),executeCOPIER>FUNCTION>CCD>DF-WLVL1,DFWLVL2andwritethevaluewhichisautomaticallysetinthe servicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata WhenreplacingtheScannerUnit(paperback) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 700to1400 1156 COPIER>FUNCTION>CCD>DF-WLVL1,DF-WLVL2 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFTBK-BW Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-173
8
IMG-REG
COPIER>ADJUST>IMG-REG
REG-H-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-H-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-174
COPIER>ADJUST>IMG-REG
REG-H-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-HS-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AdjBkcolorwritestartpstn:horzscan Toadjustthewritestartpositionofblackcolorimageinthe horizontalscanningdirectioninincrementsof1pixel. Whenblackcolordisplacementinthehorizontalscanning directionoccurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1pixel 0 AdjYcolorwritestartpstn:horzscan Toadjustthewritestartpositionofyellowcolorimageinthe horizontalscanningdirectioninsmallerincrementsthan1pixel. Whenyellowcolordisplacementinthehorizontalscanning directionoccurs(smallerthan1pixel) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1/32pixel 0 -
AdjYcolorwritestartpstn:horzscan Toadjustthewritestartpositionofyellowcolorimageinthe horizontalscanningdirectioninincrementsof1pixel. Whenyellowcolordisplacementinthehorizontalscanning directionoccurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1pixel 0 AdjCcolorwritestartpstn:horzscan Toadjustthewritestartpositionofcyancolorimageinthe horizontalscanningdirectioninincrementsof1pixel. Whencyancolordisplacementinthehorizontalscanning directionoccurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1pixel 0 -
8-174
8
COPIER>ADJUST>IMG-REG
REG-HS-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-HS-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-175
COPIER>ADJUST>IMG-REG
REG-V-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-V-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AdjYcolorwritestartpstn:vertscan Toadjustthewritestartpositionofyellowcolorimageinthe verticalscanningdirectioninincrementsof1pixel. Whenyellowcolordisplacementintheverticalscanningdirection occurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. 0to127 1line 0 AdjCcolorwritestartpstn:vertscan Toadjustthewritestartpositionofcyancolorimageinthe verticalscanningdirectioninincrementsof1pixel. Whencyancolordisplacementintheverticalscanningdirection occurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1line 0 -
AdjCcolorwritestartpstn:horzscan Toadjustthewritestartpositionofcyancolorimageinthe horizontalscanningdirectioninsmallerincrementsthan1pixel. Whencyancolordisplacementinthehorizontalscanning directionoccurs(smallerthan1pixel) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1/32pixel 0 AdjBkcolorwritestartpstn:horzscan Toadjustthewritestartpositionofblackcolorimageinthe horizontalscanningdirectioninsmallerincrementsthan1pixel. Whenblackcolordisplacementinthehorizontalscanning directionoccurs(smallerthan1pixel) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1/32pixel 0 -
8-175
8
COPIER>ADJUST>IMG-REG
REG-V-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-H-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-176
COPIER>ADJUST>IMG-REG
REG-V-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-HS-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AdjMcolorwritestartpstn:vertscan Toadjustthewritestartpositionofmagentacolorimageinthe verticalscanningdirectioninincrementsof1pixel. Whenmagentacolordisplacementintheverticalscanning directionoccurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1line 0 FineadjMwritestartpstn:horzscan Toadjustthewritestartpositionofmagentacolorimageinthe horizontalscanningdirectioninsmallerincrementsthan1pixel. Whenmagentacolordisplacementinthehorizontalscanning directionoccurs(smallerthan1pixel) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1/32pixel 0 T-8-23
AdjBkcolorwritestartpstn:vertscan Toadjustthewritestartpositionofblackcolorimageinthe verticalscanningdirectioninincrementsof1pixel. Whenblackcolordisplacementintheverticalscanningdirection occurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1line 0 AdjMcolorwritestartpstn:horzscan Toadjustthewritestartpositionofmagentacolorimageinthe horizontalscanningdirectioninincrementsof1pixel. Whenmagentacolordisplacementinthehorizontalscanning directionoccurs Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -128to127 1pixel 0 -
8-176
8
DENS
COPIER>ADJUST>DENS
SGNL-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SGNL-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-177
COPIER>ADJUST>DENS
SGNL-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REF-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Ctonerdensvalueentryatinitialize ToentertheCtonerdensityvalueofPatchSensor(Center)at initialization. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1023 0 Ytonerdensitytargetvalueentry ToentertheATRSensor(Y)targetvalueofATRcontrolafter RAMclear. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to255 94(atRAMclear).Thisischangedbyinitialization. -
Ytonerdensvalueentryatinitialize ToentertheYtonerdensityvalueofPatchSensor(Center)at initialization. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1023 0 Mtonerdensvalueentryatinitialize ToentertheMtonerdensityvalueofPatchSensor(Center)at initialization. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1023 0 -
8-177
8
COPIER>ADJUST>DENS
REF-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REF-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-178
COPIER>ADJUST>DENS
SGNL-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMAX-Y Lv.2 Details Bktonerdensvalueentryatinitialize ToentertheBktonerdensityvalueofPatchSensor(Center)at initialization. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1023 0 AdjD-maxctrlYcolordenstargetVL Animagefailuremightoccurbecausethedensitytargetvalue oftheD-maxcontrolbecomesoutofthesettingtabledueto environmentchange. AdjusttheoffsetoftheyellowdensitytargetvalueofD-max control. TheoffsetisresetwhenD-maxcontrol(FullAdjust)isexecuted. Whenanyimagefailureoccursduetoenvironmentchange 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. Thisislimitedfortheuseofprintermodel. -128to128 0 -
Mtonerdensitytargetvalueentry ToentertheATRSensor(M)targetvalueofATRcontrolafter RAMclear. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to255 94(atRAMclear).Thisischangedbyinitialization. Ctonerdensitytargetvalueentry ToentertheATRSensor(C)targetvalueofATRcontrolafter RAMclear. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to255 94(atRAMclear).Thisischangedbyinitialization. -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-178
8
COPIER>ADJUST>DENS
DMAX-M Lv.2 Details
8-179
COPIER>ADJUST>DENS
P-TG-Y Lv.2 Details AdjofATRcontrolY-colortargetvalue ToadjusttheoffsetoftheATRpatchtargetvalueforY. Whenthetargetvaluedetermineduponinitializationischanged, theT/Dratioisalsochanged. Fogginganddensityincreasearealleviatedwhenthevalueis smaller,andcarrieradherenceisalleviatedwhenitislarger. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Make50printsofapprox.10%imageratio(ex.COPIER> TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. Execute the Auto Adjust Gradation first to increase the density. If youadjusttheoffsetofthetargetvalue,foggingmightgetworse. -4to4 0 Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMAX-C Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjD-maxctrlMcolordenstargetVL Animagefailuremightoccurbecausethedensitytargetvalue oftheD-maxcontrolbecomesoutofthesettingtabledueto environmentchange. AdjusttheoffsetofthemagentadensitytargetvalueofD-max control. TheoffsetisresetwhenD-maxcontrol(FullAdjust)isexecuted. Whenanyimagefailureoccursduetoenvironmentchange 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. Thisislimitedfortheuseofprintermodel. -128to128 0 AdjD-maxctrlCcolordenstargetVL Animagefailuremightoccurbecausethedensitytargetvalue oftheD-maxcontrolbecomesoutofthesettingtabledueto environmentchange. AdjusttheoffsetofthecyandensitytargetvalueofD-max control. TheoffsetisresetwhenD-maxcontrol(FullAdjust)isexecuted. Whenanyimagefailureoccursduetoenvironmentchange
Usecase Adj/set/operatemethod
8-179
8
COPIER>ADJUST>DENS
P-TG-M Lv.2 Details
8-180
COPIER>ADJUST>DENS
P-TG-C Lv.2 Details AdjofATRcontrolC-colortargetvalue ToadjusttheoffsetoftheATRpatchtargetvalueforC. Whenthetargetvaluedetermineduponinitializationischanged, theT/Dratioisalsochanged. Fogginganddensityincreasearealleviatedwhenthevalueis smaller,andcarrieradherenceisalleviatedwhenitislarger. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Make50printsofapprox.10%imageratio(ex.COPIER> TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. Execute the Auto Adjust Gradation first to increase the density. If youadjusttheoffsetofthetargetvalue,foggingmightgetworse. -4to4 0 Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust -
Usecase Adj/set/operatemethod
AdjofATRcontrolM-colortargetvalue ToadjusttheoffsetoftheATRpatchtargetvalueforM. Whenthetargetvaluedetermineduponinitializationischanged, theT/Dratioisalsochanged. Fogginganddensityincreasearealleviatedwhenthevalueis smaller,andcarrieradherenceisalleviatedwhenitislarger. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Make50printsofapprox.10%imageratio(ex.COPIER> TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. Execute the Auto Adjust Gradation first to increase the density. If youadjusttheoffsetofthetargetvalue,foggingmightgetworse. -4to4 0 Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust -
Usecase Adj/set/operatemethod
8-180
8
COPIER>ADJUST>DENS
P-TG-K Lv.2 Details
8-181
COPIER>ADJUST>DENS
P-ALPHA Lv.1 Details AdjustmentofPatchSensoralphavalue To adjust the adjustment coefficient alpha for the patch sensor . Thevaluemultipliedby1000isdisplayedinthescreen. WhenreplacingthePatchSensorUnit,enterthevalueofthe servicelabel. WhenadensityreadingerrorofthePatchSensoroccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 512to2047 1200 COPIER>FUNCTION>MISC-P>PT-LPADJ alpha:RatioofP-wavetoS-wave AdjYcolorptchdensconvscoeffctk To adjust the yellow patch density conversion coefficient k value ofthePatchSensor. Thevaluemultipliedby100isdisplayedonthescreen. WhenthePatchSensorfailstoreadthedensity 0to2047 1700 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMAX-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjofATRcontrolBk-colortargetvalue ToadjusttheoffsetoftheATRpatchtargetvalueforBk. Whenthetargetvaluedetermineduponinitializationischanged, theT/Dratioisalsochanged. Fogginganddensityincreasearealleviatedwhenthevalueis smaller,andcarrieradherenceisalleviatedwhenitislarger. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Make50printsofapprox.10%imageratio(ex.COPIER> TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. Execute the Auto Adjust Gradation first to increase the density. If youadjusttheoffsetofthetargetvalue,foggingmightgetworse. -4to4 0 Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust AdjD-maxctrlBkcolordenstargetVL Animagefailuremightoccurbecausethedensitytargetvalue oftheD-maxcontrolbecomesoutofthesettingtabledueto environmentchange. AdjusttheoffsetoftheblackdensitytargetvalueofD-max control. TheoffsetisresetwhenD-maxcontrol(FullAdjust)isexecuted. Whenanyimagefailureoccursduetoenvironmentchange 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. -128to128 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-K-Y Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-181
8
COPIER>ADJUST>DENS
P-K-M Lv.2 Details
8-182
COPIER>ADJUST>DENS
REF-K Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMLMT-HY Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Bktonerdensitytargetvalueentry ToentertheATRSensor(Bk)targetvalueofATRcontrolafter RAMclear. WhencheckingthevaluebeforeRAMclearandre-enteritafter RAMclear 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to255 94(atRAMclear).Thisischangedbyinitialization. YtonerchargingDCvoltageupperlimit ToadjusttheoffsetofthechargingDCvoltageupperlimitforY inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-K-C Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-K-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjMcolorptchdensconvscoeffctk To adjust the magenta patch density conversion coefficient k valueofthePatchSensor. Thevaluemultipliedby100isdisplayedonthescreen. WhenthePatchSensorfailstoreadthedensity 0to2047 1700 AdjCcolorptchdensconvscoeffctk To adjust the cyan patch density conversion coefficient k value of thePatchSensor. Thevaluemultipliedby100isdisplayedonthescreen. WhenthePatchSensorfailstoreadthedensity 0to2047 1700 AdjBkcolorptchdensconvscoeffctk To adjust the black patch density conversion coefficient k value ofthePatchSensor. Thevaluemultipliedby100isdisplayedonthescreen. WhenthePatchSensorfailstoreadthedensity 0to2047 1700 -
8-182
8
COPIER>ADJUST>DENS
DMLMT-HM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMLMT-HC Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-183
COPIER>ADJUST>DENS
DMLMT-HK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMLMT-LY Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BktonerchargingDCvoltageupperlimit ToadjusttheoffsetofthechargingDCvoltageupperlimitforBk inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust YtonerchargingDCvoltagelowerlimit ToadjusttheoffsetofthechargingDCvoltagelowerlimitforYin D-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust -
MtonerchargingDCvoltageupperlimit ToadjusttheoffsetofthechargingDCvoltageupperlimitforM inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust CtonerchargingDCvoltageupperlimit ToadjusttheoffsetofthechargingDCvoltageupperlimitforC inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust -
8-183
8
COPIER>ADJUST>DENS
DMLMT-LM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMLMT-LC Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-184
COPIER>ADJUST>DENS
DMLMT-LK Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONT-Y Lv.1 Details BktonerchargingDCvoltagelowerlimit ToadjusttheoffsetofthechargingDCvoltagelowerlimitforBk inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust ATRSensor(Y)controlvoltageentry ToenterthedensitydetectioncontrolvoltageofATRSensor(Y). WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenthebackupdataisclearedbyRAMclear,etc. Enterthesettingvalue,andthenpressOKkey. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 32to68 0.1V 32to68 COPIER>DISPLAY>DENS>CONT-Y -
MtonerchargingDCvoltagelowerlimit ToadjusttheoffsetofthechargingDCvoltagelowerlimitforM inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust CtonerchargingDCvoltagelowerlimit ToadjusttheoffsetofthechargingDCvoltagelowerlimitforC inD-maxcontrol. WhenafailureoccursduetolimiterofD-maxcontrol 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation>QuickAdjust. Donotusethisatthenormalservice. -300to300 1V Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-184
8
COPIER>ADJUST>DENS
CONT-M Lv.1 Details
8-185
COPIER>ADJUST>DENS
CONT-K Lv.1 Details ATRSensor(Bk)controlvoltageentry ToenterthedensitydetectioncontrolvoltageofATRSensor(Bk). WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenthebackupdataisclearedbyRAMclear,etc. Enterthesettingvalue,andthenpressOKkey. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 32to68 0.1V 32to68 COPIER>DISPLAY>DENS>CONT-K T-8-24
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONT-C Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ATRSensor(M)controlvoltageentry ToenterthedensitydetectioncontrolvoltageofATRSensor(M). WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenthebackupdataisclearedbyRAMclear,etc. Enterthesettingvalue,andthenpressOKkey. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 32to68 0.1V 32to68 COPIER>DISPLAY>DENS>CONT-M ATRSensor(C)controlvoltageentry ToenterthedensitydetectioncontrolvoltageofATRSensor(C). WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenthebackupdataisclearedbyRAMclear,etc. Enterthesettingvalue,andthenpressOKkey. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 32to68 0.1V 32to68 COPIER>DISPLAY>DENS>CONT-C -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-185
8
BLANK
COPIER>ADJUST>BLANK
BLANK-T Lv.1 Details
8-186
COPIER>ADJUST>BLANK
BLANK-R Lv.1 Details Adjustmentofrightedgemargin Toadjustthemarginontherightedgeofpaper. Asthevalueisincrementedby1,themarginisincreasedtoward thecenterofthepaperby1pixel(0.0847mm). Whenreducingthemarginuponuser'srequest When enlarging the margin for transfer separation/fixing separation Enterthesettingvalue,andthenpressOKkey. 0to1181 1pixel 59 Adjustmentoftrailingedgemargin Toadjustthemarginonthetrailingedgeofpaper. Asthevalueisincrementedby1,themarginisincreasedtoward thecenterofthepaperby1pixel(0.0847mm). Whenreducingthemarginuponuser'srequest When enlarging the margin for transfer separation/fixing separation Enterthesettingvalue,andthenpressOKkey. 0to1181 1pixel 59 T-8-25
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BLANK-L Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjustmentofleadingedgemargin Toadjustthemarginontheleadingedgeofpaper. Asthevalueisincrementedby1,themarginisincreasedtoward thecenterofthepaperby1pixel(0.0847mm). Whenreducingthemarginuponuser'srequest When enlarging the margin for transfer separation/fixing separation Enterthesettingvalue,andthenpressOKkey. Donotusethisatthenormalservice. 0to1181 1pixel 94 Adjustmentofleftedgemargin Toadjustthemarginontheleftedgeofpaper. Asthevalueisincrementedby1,themarginisincreasedtoward thecenterofthepaperby1pixel(0.0847mm). Whenreducingthemarginuponuser'srequest When enlarging the margin for transfer separation/fixing separation Enterthesettingvalue,andthenpressOKkey. 0to1181 1pixel 59 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BLANK-B Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-186
8
V-CONT
COPIER>ADJUST>V-CONT
VCONT-Y Lv.2 Details
8-187
COPIER>ADJUST>V-CONT
VCONT-M Lv.2 Details AdjofMcolorcontrastpotential ToadjustthecontrastpotentialforM. Asthevalueisincrementedby1,thecontrastpotentialchanges by10V. +:Imagebecomesdarker. -:Imagebecomeslighter. Whenthevalueistoolarge,paperwindsaroundtheFixing Rolleroratransferfailureoccurs. Inprinciple,theadjustmentofthedensityshouldbeperformed inAdjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode. WhenadjustingthedensityofD-maxcontrolinthecasethatan imagedensityfailureoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteCOPIER>FUNCTION>DPC>DPC. 4)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -20to20 10V -10to10 0 COPIER>ADJUST>V-CONT>VCONT-Y,VCONT-C,VCONT-K COPIER>FUNCTION>DPC>DPC Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode -
Usecase Adj/set/operatemethod
Supplement/memo
AdjofYcolorcontrastpotential ToadjustthecontrastpotentialforY. Asthevalueisincrementedby1,thecontrastpotentialchanges by10V. +:Imagebecomesdarker. -:Imagebecomeslighter. Whenthevalueistoolarge,paperwindsaroundtheFixing Rolleroratransferfailureoccurs. Inprinciple,theadjustmentofthedensityshouldbeperformed inAdjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode. WhenadjustingthedensityofD-maxcontrolinthecasethatan imagedensityfailureoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteCOPIER>FUNCTION>DPC>DPC. 4)ExecuteAutoAdjustGradation>FullAdjust. Donotusethisatthenormalservice. -20to20 10V -10to10 0 COPIER>ADJUST>V-CONT>VCONT-M,VCONT-C,VCONT-K COPIER>FUNCTION>DPC>DPC Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode -
Usecase Adj/set/operatemethod
Supplement/memo
8-187
8
COPIER>ADJUST>V-CONT
VCONT-C Lv.2 Details
8-188
COPIER>ADJUST>V-CONT
VCONT-K Lv.2 Details AdjofBkcolorcontrastpotential ToadjusttheoffsetofthecontrastpotentialVcontforBk. Asthevalueisincrementedby1,thecontrastpotentialchanges by10V. +:Imagebecomesdarker. -:Imagebecomeslighter. Whenthevalueistoolarge,paperwindsaroundtheFixingBelt oratransferfailureoccurs. Inprinciple,theadjustmentofthedensityshouldbeperformed inAdjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode. WhenadjustingthedensityofD-maxcontrolinthecasethatan imagedensityfailureoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteCOPIER>FUNCTION>DPC>DPC 4)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -20to20 10V -10to10 0 COPIER>ADJUST>V-CONT>VCONT-Y,VCONT-M,VCONT-C COPIER>FUNCTION>DPC>DPC Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode -
Usecase Adj/set/operatemethod
Supplement/memo
AdjofCcolorcontrastpotential ToadjustthecontrastpotentialforC. Asthevalueisincrementedby1,thecontrastpotentialchanges by10V. +:Imagebecomesdarker. -:Imagebecomeslighter. Whenthevalueistoolarge,paperwindsaroundtheFixing Rolleroratransferfailureoccurs. Inprinciple,theadjustmentofthedensityshouldbeperformed inAdjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode. WhenadjustingthedensityofD-maxcontrolinthecasethatan imagedensityfailureoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteCOPIER>FUNCTION>DPC>DPC. 4)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -20to20 10V -10to10 0 COPIER>ADJUST>V-CONT>VCONT-Y,VCONT-M,VCONT-K COPIER>FUNCTION>DPC>DPC Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>Density AdjustmentMode -
Usecase Adj/set/operatemethod
Supplement/memo
8-188
8
COPIER>ADJUST>V-CONT
VBACK-Y Lv.2 Details
8-189
COPIER>ADJUST>V-CONT
VBACK-M Lv.2 Details AdjMcolorfoggingremovalpotential ToadjusttheoffsetofthefoggingremovalpotentialVbackforM. AvalueobtainedbyaddingtheadjustmentvalueinAdjustment/ Maintenance>AdjustImageQuality>CorrectColorCasttothe foggingremovalpotentialissetasthefoggingadjustmentvalue. Asthevalueisincrementedby1,thefoggingremovalpotential changesby5V. +:Fogging,blankingofimageedge,andcarrieradherenceare alleviated. -:Coarseimage,blankingofimageedge,andcarrier adherencearealleviated. AttheoccurrenceofMfogging 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 10V -5to5 0 COPIER>ADJUST>V-CONT>VBACK-Y,VBACK-C,VBACK-K Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>CorrectColor Cast -
Usecase Adj/set/operatemethod
Supplement/memo
AdjYcolorfoggingremovalpotential ToadjusttheoffsetofthefoggingremovalpotentialVbackforY. AvalueobtainedbyaddingtheadjustmentvalueinAdjustment/ Maintenance>AdjustImageQuality>CorrectColorCasttothe foggingremovalpotentialissetasthefoggingadjustmentvalue. Asthevalueisincrementedby1,thefoggingremovalpotential changesby5V. +:Fogging,blankingofimageedge,andcarrieradherenceare alleviated. -:Coarseimage,blankingofimageedge,andcarrier adherencearealleviated. AttheoccurrenceofYfogging 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 10V -5to5 0 COPIER>ADJUST>V-CONT>VBACK-M,VBACK-C,VBACK-K Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>CorrectColor Cast -
Usecase Adj/set/operatemethod
Supplement/memo
8-189
8
COPIER>ADJUST>V-CONT
VBACK-C Lv.2 Details
8-190
COPIER>ADJUST>V-CONT
VBACK-K Lv.2 Details AdjBkcolorfoggingremovalpotential ToadjusttheoffsetofthefoggingremovalpotentialVbackfor Bk. AvalueobtainedbyaddingtheadjustmentvalueinAdjustment/ Maintenance>AdjustImageQuality>CorrectColorCasttothe foggingremovalpotentialissetasthefoggingadjustmentvalue. Asthevalueisincrementedby1,thefoggingremovalpotential changesby5V. +:Fogging,blankingofimageedge,andcarrieradherenceare alleviated. -:Coarseimage,blankingofimageedge,andcarrier adherencearealleviated. AttheoccurrenceofBkfogging 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 10V -5to5 0 COPIER>ADJUST>V-CONT>VBACK-Y,VBACK-M,VBACK-C COPIER>DISPLAY>DPOT>VBACK-K Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>CorrectColor Cast -
Usecase Adj/set/operatemethod
Supplement/memo
AdjCcolorfoggingremovalpotential ToadjusttheoffsetofthefoggingremovalpotentialVbackforC. AvalueobtainedbyaddingtheadjustmentvalueinAdjustment/ Maintenance>AdjustImageQuality>CorrectColorCasttothe foggingremovalpotentialissetasthefoggingadjustmentvalue. Asthevalueisincrementedby1,thefoggingremovalpotential changesby5V. +:Fogging,blankingofimageedge,andcarrieradherenceare alleviated. -:Coarseimage,blankingofimageedge,andcarrier adherencearealleviated. AttheoccurrenceofCfogging 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteAutoAdjustGradation>FullAdjust. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 10V -5to5 0 COPIER>ADJUST>V-CONT>VBACK-Y,VBACK-M,VBACK-K Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>FullAdjust Adjustment/Maintenance>AdjustImageQuality>CorrectColor Cast -
Usecase Adj/set/operatemethod
Supplement/memo
8-190
8
COPIER>ADJUST>V-CONT
PT-VCT-Y Lv.2 Details
8-191
COPIER>ADJUST>V-CONT
PT-VCT-C Lv.2 Details AdjofCcolortargetcontrastpotential ToadjusttheCpatchtargetcontrastpotentialforD-max PASCALcontrol. Asthevalueisincrementedby1,thetargetcontrastpotential changesby1V. +:Potentialisincreased. -:Potentialisdecreased. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Print50sheetsofimagewithapprox.10%imageratio(e.g. COPIER>TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. -50to50 1V Accordingtotheenvironmentcondition. COPIER>ADJUST>V-CONT>PT-VCT-Y,PT-VCT-M,PT-VCT-K AdjofBkclrtargetcontrastpotential ToadjusttheBkpatchtargetcontrastpotentialforD-max PASCALcontrol. Asthevalueisincrementedby1,thetargetcontrastpotential changesby1V. +:Potentialisincreased. -:Potentialisdecreased. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Print50sheetsofimagewithapprox.10%imageratio(e.g. COPIER>TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. -50to50 1V Accordingtotheenvironmentcondition. COPIER>ADJUST>V-CONT>PT-VCT-Y,PT-VCT-M,PT-VCT-C T-8-26
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PT-VCT-M Lv.2 Details
Usecase Adj/set/operatemethod
AdjofYcolortargetcontrastpotential ToadjusttheYpatchtargetcontrastpotentialforD-maxPASCAL control. Asthevalueisincrementedby1,thetargetcontrastpotential changesby1V. +:Potentialisincreased. -:Potentialisdecreased. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Print50sheetsofimagewithapprox.10%imageratio(e.g. COPIER>TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. -50to50 1V Accordingtotheenvironmentcondition. COPIER>ADJUST>V-CONT>PT-VCT-M,PT-VCT-C,PTVCT-K AdjofMcolortargetcontrastpotential ToadjusttheMpatchtargetcontrastpotentialforD-max PASCALcontrol. Asthevalueisincrementedby1,thetargetcontrastpotential changesby1V. +:Potentialisincreased. -:Potentialisdecreased. Whendensityfailures,fogging,andcarrieradherence,etc.occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Print50sheetsofimagewithapprox.10%imageratio(e.g. COPIER>TEST>PG>TYPE:16)4times. 4)ExecuteAutoAdjustGradation>FullAdjust. -50to50 1V Accordingtotheenvironmentcondition. COPIER>ADJUST>V-CONT>PT-VCT-Y,PT-VCT-C,PT-VCT-K -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PT-VCT-K Lv.2 Details
Usecase Adj/set/operatemethod
8-191
8
PASCAL
COPIER>ADJUST>PASCAL
OFST-P-Y Lv.1 Details
8-192
COPIER>ADJUST>PASCAL
OFST-P-C Lv.1 Details Cdensityadjattestprintreading ToadjusttheoffsetofCcolortestprintreadingsignalatAuto AdjustGradation(FullAdjust). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthegreatervalueisset,theimageafteradjustmentgets darker. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -128to128 AccordingtotheadjustmentvalueoftheReaderatfactory shipment Bkdensityadjattestprintreading ToadjusttheoffsetofBkcolortestprintreadingsignalatAuto AdjustGradation(FullAdjust). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthegreatervalueisset,theimageafteradjustmentgets darker. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -128to128 AccordingtotheadjustmentvalueoftheReaderatfactory shipment T-8-27
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST-P-M Lv.1 Details
Usecase Adj/set/operatemethod
Ydensityadjattestprintreading ToadjusttheoffsetofYcolortestprintreadingsignalatAuto AdjustGradation(FullAdjust). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthegreatervalueisset,theimageafteradjustmentgets darker. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. -128to128 AccordingtotheadjustmentvalueoftheReaderatfactory shipment Mdensityadjattestprintreading ToadjusttheoffsetofMcolortestprintreadingsignalatAuto AdjustGradation(FullAdjust). WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. Asthegreatervalueisset,theimageafteradjustmentgets darker. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. -128to128 AccordingtotheadjustmentvalueoftheReaderatfactory shipment -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST-P-K Lv.1 Details
Usecase Adj/set/operatemethod
8-192
8
COLOR
COPIER>ADJUST>COLOR
ADJ-Y Lv.1 Details
8-193
COPIER>ADJUST>COLOR
ADJ-C Lv.1 Details Ccolorbalanceadjustment ToadjustthedefaultvalueofthecolorbalanceforCwhenthe densityofCvariesbetweenmachines. Asthegreatervalueisset,theimagegetsdarker. If the value is too large, a transfer failure and/or a fixing failure occurs. Whenalleviatingthevariationofthedensitybetweenmachines uponuser'srequest 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Bkcolorbalanceadjustment ToadjustthedefaultvalueofthecolorbalanceforBkwhenthe densityofBkvariesbetweenmachines. Asthegreatervalueisset,theimagegetsdarker. If the value is too large, a transfer failure and/or a fixing failure occurs. Whenalleviatingthevariationofthedensitybetweenmachines uponuser'srequest 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-M Lv.1 Details
Usecase Adj/set/operatemethod
Ycolorbalanceadjustment ToadjustthedefaultvalueofthecolorbalanceforYwhenthe densityofYvariesbetweenmachines. Asthegreatervalueisset,theimagegetsdarker. If the value is too large, a transfer failure and/or a fixing failure occurs. Whenalleviatingthevariationofthedensitybetweenmachines uponuser'srequest 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. -8to8 0 Mcolorbalanceadjustment ToadjustthedefaultvalueofthecolorbalanceforMwhenthe densityofMvariesbetweenmachines. Asthegreatervalueisset,theimagegetsdarker. If the value is too large, a transfer failure and/or a fixing failure occurs. Whenalleviatingthevariationofthedensitybetweenmachines uponuser'srequest 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-K Lv.1 Details
Usecase Adj/set/operatemethod
8-193
8
COPIER>ADJUST>COLOR
OFST-Y Lv.1 Details
8-194
COPIER>ADJUST>COLOR
OFST-M Lv.1 Details AdjofMbrightareadens&colorbalance ToadjustthebrightareadensityandcolorbalanceofM. Asthegreatervalueisset,theimagegetsdarker. Lowerthevaluewhenthebackgroundcannotbereadcorrectly becausethedensityofadocumentisdarkandincreasethe valuewhenthedensityofadocumentislight. Lowerthevaluewhenremovalofthebackgroundisnot performedcorrectlyandafogging-likeimageappears. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalanceinusermode. Whenthebackgroundofadocumentcannotbereadcorrectly Whenremovalofthebackgroundcannotbeperformed correctlyandafogging-likeimageappears 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -32to32 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase
Adj/set/operatemethod
AdjofYbrightareadens&colorbalance ToadjustthebrightareadensityandcolorbalanceofY. Asthegreatervalueisset,theimagegetsdarker. Lowerthevaluewhenthebackgroundcannotbereadcorrectly becausethedensityofadocumentisdarkandincreasethe valuewhenthedensityofadocumentislight. Lowerthevaluewhenremovalofthebackgroundisnot performedcorrectlyandafogging-likeimageappears. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalanceinusermode. Whenthebackgroundofadocumentcannotbereadcorrectly Whenremovalofthebackgroundcannotbeperformed correctlyandafogging-likeimageappears 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -32to32 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase
Adj/set/operatemethod
8-194
8
COPIER>ADJUST>COLOR
OFST-C Lv.1 Details
8-195
COPIER>ADJUST>COLOR
OFST-K Lv.1 Details AdjBkbrightareadens&colorbalance ToadjustthebrightareadensityandcolorbalanceofBk. Asthegreatervalueisset,theimagegetsdarker. Lowerthevaluewhenthebackgroundcannotbereadcorrectly becausethedensityofadocumentisdarkandincreasethe valuewhenthedensityofadocumentislight. Lowerthevaluewhenremovalofthebackgroundisnot performedcorrectlyandafogging-likeimageappears. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalanceinusermode. Whenthebackgroundofadocumentcannotbereadcorrectly Whenremovalofthebackgroundcannotbeperformed correctlyandafogging-likeimageappears 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -32to32 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofYlowdensarea ToadjustthecolorbalanceofthelowdensityareaofY. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase
Adj/set/operatemethod
AdjofCbrightareadens&colorbalance ToadjustthebrightareadensityandcolorbalanceofC. Asthegreatervalueisset,theimagegetsdarker. Lowerthevaluewhenthebackgroundcannotbereadcorrectly becausethedensityofadocumentisdarkandincreasethe valuewhenthedensityofadocumentislight. Lowerthevaluewhenremovalofthebackgroundisnot performedcorrectlyandafogging-likeimageappears. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalanceinusermode. Whenthebackgroundofadocumentcannotbereadcorrectly Whenremovalofthebackgroundcannotbeperformed correctlyandafogging-likeimageappears 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -32to32 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase
Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LD-OFS-Y Lv.2 Details
Usecase Adj/set/operatemethod
8-195
8
COPIER>ADJUST>COLOR
LD-OFS-M Lv.2 Details
8-196
COPIER>ADJUST>COLOR
LD-OFS-K Lv.2 Details ColorbalanceadjofBklowdensarea ToadjustthecolorbalanceofthelowdensityareaofBk. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofYmiddensarea ToadjustthecolorbalanceoftheintermediatedensityareaofY. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LD-OFS-C Lv.2 Details
Usecase Adj/set/operatemethod
ColorbalanceadjofMlowdensarea ToadjustthecolorbalanceofthelowdensityareaofM. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofClowdensarea ToadjustthecolorbalanceofthelowdensityareaofC. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MD-OFS-Y Lv.2 Details
Usecase Adj/set/operatemethod
8-196
8
COPIER>ADJUST>COLOR
MD-OFS-M Lv.2 Details
8-197
COPIER>ADJUST>COLOR
MD-OFS-K Lv.2 Details ColorbalanceadjofBkmiddensarea Toadjustthecolorbalanceoftheintermediatedensityareaof Bk. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofYhighdensarea ToadjustthecolorbalanceofthehighdensityareaofY. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MD-OFS-C Lv.2 Details
Usecase Adj/set/operatemethod
ColorbalanceadjofMmiddensarea ToadjustthecolorbalanceoftheintermediatedensityareaofM. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofCmiddensarea ToadjustthecolorbalanceoftheintermediatedensityareaofC. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HD-OFS-Y Lv.2 Details
Usecase Adj/set/operatemethod
8-197
8
COPIER>ADJUST>COLOR
HD-OFS-M Lv.2 Details
8-198
COPIER>ADJUST>COLOR
HD-OFS-K Lv.2 Details ColorbalanceadjofBkhighdensarea ToadjustthecolorbalanceofthehighdensityareaofBk. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance T-8-28
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HD-OFS-C Lv.2 Details
Usecase Adj/set/operatemethod
ColorbalanceadjofMhighdensarea ToadjustthecolorbalanceofthehighdensityareaofM. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance ColorbalanceadjofChighdensarea ToadjustthecolorbalanceofthehighdensityareaofC. Asthegreatervalueisset,theimagegetsdarker. ThissettingislinkedwithAdjustment/Maintenance>Adjust ImageQuality>ColorBalance. Donotusethiswhenthemachineisoperatingcorrectly. 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -8to8 0 Adjustment/Maintenance>AdjustImageQuality>ColorBalance -
Usecase Adj/set/operatemethod
8-198
8
HV-PRI
COPIER>ADJUST>HV-PRI
DIS-TGY Lv.2 Details Usecase Adj/set/operatemethod
8-199
COPIER>ADJUST>HV-PRI
DIS-TGC Lv.2 Details Usecase Adj/set/operatemethod DischgcrrntctrlCtgtcrrntadj:1/1SPD ToadjusttheoffsetoftheCtargetcurrentatdischargecurrent controlinplainpaper(1/1speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 DischgcrrntctrlBktgtcrrntadj:1/1SPD ToadjusttheoffsetoftheBktargetcurrentatdischargecurrent controlinplainpaper(1/1speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DIS-TGM Lv.2 Details Usecase Adj/set/operatemethod
DischgcrrntctrlYtgtcrrntadj:1/1SPD ToadjusttheoffsetoftheYtargetcurrentatdischargecurrent controlinplainpaper(1/1speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 DischgcrrntctrlMtgtcrrntadj:1/1SPD ToadjusttheoffsetoftheMtargetcurrentatdischargecurrent controlinplainpaper(1/1speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DIS-TGK Lv.2 Details Usecase Adj/set/operatemethod
8-199
8
COPIER>ADJUST>HV-PRI
DIS-TGY2 Lv.2 Details Usecase Adj/set/operatemethod
8-200
COPIER>ADJUST>HV-PRI
DIS-TGC2 Lv.2 Details Usecase Adj/set/operatemethod DischgcrrntctrlCtgtadj:1/2,1/3SPD ToadjusttheoffsetoftheCtargetcurrentatdischargecurrent controlinplainpaper(1/2,1/3speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 DischgcrrntctrlBktgtadj:1/2,1/3SPD ToadjusttheoffsetoftheBktargetcurrentatdischargecurrent controlinplainpaper(1/2,1/3speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DIS-TGM2 Lv.2 Details Usecase Adj/set/operatemethod
DischgcrrntctrlYtgtadj:1/2,1/3SPD ToadjusttheoffsetoftheYtargetcurrentatdischargecurrent controlinplainpaper(1/2,1/3speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 DischgcrrntctrlMtgtadj:1/2,1/3SPD ToadjusttheoffsetoftheMtargetcurrentatdischargecurrent controlinplainpaper(1/2,1/3speed). Whenaimagefailure(sand-likeimage)occurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 5uA -5to5 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DIS-TGK2 Lv.2 Details Usecase Adj/set/operatemethod
8-200
8
COPIER>ADJUST>HV-PRI
OFSTAC-Y Lv.1 Details
8-201
COPIER>ADJUST>HV-PRI
OFSTAC-C Lv.1 Details AdjofCclrchargeACcurrent:1/1SPD ToadjusttheoffsetofthechargeACcurrentforC. Asthevalueisincrementedby1,thecurrentvalueisincreased by20uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. Ifthevalueistoolarge,thelifeofthePhotosensitiveDrum becomesshorter. -10to10 50Vpp -5to5 0 1minute COPIER>ADJUST>HV-PRI>OFSTAC-Y,OFSTAC-M, OFSTAC-K -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFSTAC-M Lv.1 Details
AdjofYclrchargeACcurrent:1/1SPD ToadjusttheoffsetofthechargeACcurrentforY. Asthevalueisincrementedby1,thecurrentvalueisincreased by20uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. Ifthevalueistoolarge,thelifeofthePhotosensitiveDrum becomesshorter. -10to10 50Vpp -5to5 0 1minute COPIER>ADJUST>HV-PRI>OFSTAC-M,OFSTAC-C, OFSTAC-K AdjofMclrchargeACcurrent:1/1SPD ToadjusttheoffsetofthechargeACcurrentforM. Asthevalueisincrementedby1,thecurrentvalueisincreased by20uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. Ifthevalueistoolarge,thelifeofthePhotosensitiveDrum becomesshorter. -10to10 50Vpp -5to5 0 1minute COPIER>ADJUST>HV-PRI>OFSTAC-Y,OFSTAC-C, OFSTAC-K -
8-201
8
COPIER>ADJUST>HV-PRI
OFSTAC-K Lv.1 Details
8-202
COPIER>ADJUST>HV-PRI
OFSTACM2 Lv.1 Details AdjofMclrchargeACcurrent:1/2SPD ToadjusttheoffsetofthechargeACcurrentforMat1/2speed. Asthevalueisincrementedby1,theoffsetisincreasedby50 uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 50Vpp -5to5 0 COPIER>ADJUST>HV-PRI>OFSTACY2,OFSTACC2, OFSTACK2 AdjofCclrchargeACcurrent:1/2SPD ToadjusttheoffsetofthechargeACcurrentforCat1/2speed. Asthevalueisincrementedby1,theoffsetisincreasedby50 uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 50Vpp -5to5 0 COPIER>ADJUST>HV-PRI>OFSTACY2,OFSTACM2, OFSTACK2 -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFSTACY2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjofBkclrchargeACcurrent:1/1SPD ToadjusttheoffsetofthechargeACcurrentforBk. Asthevalueisincrementedby1,thecurrentvalueisincreased by20uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. Ifthevalueistoolarge,thelifeofthePhotosensitiveDrum becomesshorter. -10to10 50Vpp -5to5 0 1minute COPIER>ADJUST>HV-PRI>OFSTAC-Y,OFSTAC-M, OFSTAC-C AdjofYclrchargeACcurrent:1/2SPD ToadjusttheoffsetofthechargeACcurrentforYat1/2speed. Asthevalueisincrementedby1,theoffsetisincreasedby50 uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 50Vpp -5to5 0 COPIER>ADJUST>HV-PRI>OFSTACM2,OFSTACC2, OFSTACK2 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFSTACC2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-202
8
COPIER>ADJUST>HV-PRI
OFSTACK2 Lv.1 Details
8-203 HV-TR
COPIER>ADJUST>HV-TR
1TR-TGY Lv.2 Details AdjofprmrytrnsATVCYtargetcurrent ToadjusttheoffsetofthetargetcurrentforYuponprimary transferATVCcontrol. Asthevalueisincrementedby1,theoffsetisincreasedby2uA. Increasethevalueifspottymarkormottledimageoccurs. Decreasethevalueifwhitespotsoccur. Whenanimagefailureduetotheprimarytransferoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -50to50 1uA -10to10 0 AdjofprmrytrnsATVCMtargetcurrent ToadjusttheoffsetofthetargetcurrentforMuponprimary transferATVCcontrol. Asthevalueisincrementedby1,theoffsetisincreasedby2uA. Increasethevalueifspottymarkormottledimageoccurs. Decreasethevalueifwhitespotsoccur. Whenanimagefailureduetotheprimarytransferoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -50to50 1uA -10to10 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjofBkclrchargeACcurrent:1/2SPD ToadjusttheoffsetofthechargeACcurrentforBkat1/2speed. Asthevalueisincrementedby1,theoffsetisincreasedby50 uA. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishighoraspottedimageoccurs. Attheoccurrenceofanimagedensityfailure Attheoccurrenceofaspottedimage Enterthesettingvalue,andthenpressOKkey. Donotusethiswhenthemachineisoperatingcorrectly. -10to10 50Vpp -5to5 0 COPIER>ADJUST>HV-PRI>OFSTACY2,OFSTACM2, OFSTACC2 T-8-29
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1TR-TGM Lv.2 Details
Usecase Adj/set/operatemethod
8-203
8
COPIER>ADJUST>HV-TR
1TR-TGC Lv.2 Details
8-204
COPIER>ADJUST>HV-TR
2TR-N1 Lv.1 Details SectrnsATVCtgtcrrnt:lowhmdypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideofplain paperatsecondarytransferATVCcontrol(inlowhumidity,600 dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCtgtcrrnt:lowhmdypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof plainpaperatsecondarytransferATVCcontrol(inlowhumidity, 600dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1TR-TGK1 Lv.2 Details
Usecase Adj/set/operatemethod
AdjofprmrytrnsATVCCtargetcurrent ToadjusttheoffsetofthetargetcurrentforCuponprimary transferATVCcontrol. Asthevalueisincrementedby1,theoffsetisincreasedby2uA. Increasethevalueifspottymarkormottledimageoccurs. Decreasethevalueifwhitespotsoccur. Whenanimagefailureduetotheprimarytransferoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -50to50 1uA -10to10 0 PrmrytrnsATVCBktargetcurrent(clr) ToadjusttheoffsetofthetargetcurrentforBkuponprimary transferATVCcontrolinfullcolormode. Asthevalueisincrementedby1,theoffsetisincreasedby2uA. Increasethevalueifspottymarkormottledimageoccurs. Decreasethevalueifwhitespotsoccur. Whenanimagefailureduetotheprimarytransferoccurs 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -50to50 1uA -10to10 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-N2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-204
8
COPIER>ADJUST>HV-TR
2TR-P1 Lv.1 Details
8-205
COPIER>ADJUST>HV-TR
2TR-H1 Lv.1 Details SectrnsATVCtgtcrrnt:lowhmdyhvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stside ofheavypaperatsecondarytransferATVCcontrol(inlow humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCtgtcrrnt:lowhmdyhvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof heavypaperatsecondarytransferATVCcontrol(inlowhumidity) Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-P2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCtgtcrrnt:lowhmdycrd1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof postcard/envelopeatsecondarytransferATVCcontrol(inlow humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCtgtcrrnt:lowhmdycrd2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof postcard/envelopeatsecondarytransferATVCcontrol(inlow humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-H2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-205
8
COPIER>ADJUST>HV-TR
2TR-UH1 Lv.1 Details
8-206
COPIER>ADJUST>HV-TR
2TR-N12 Lv.1 Details SectrnsATVCcrrnt:normhmdypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof plain/plain2/thinpaperatsecondarytransferATVCcontrol(in normalhumidity,600dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:normhmdypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof plain/plain2/thinpaperatsecondarytransferATVCcontrol(in normalhumidity,600dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-UH2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:lowhmdyexthvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof extraheavypaperatsecondarytransferATVCcontrol(inlow humidity) Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:lowhmdyexthvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof extraheavypaperatsecondarytransferATVCcontrol(inlow humidity) Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-N22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-206
8
COPIER>ADJUST>HV-TR
2TR-H12 Lv.1 Details
8-207
COPIER>ADJUST>HV-TR
2TR-UH12 Lv.1 Details SectrnsATVCcrrnt:normhmdyexthvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof extraheavypaperatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:normhmdyexthvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof extraheavypaperatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-H22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:normhmdyhvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof heavypaperatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:normhmdyhvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof heavypaperatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-UH22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-207
8
COPIER>ADJUST>HV-TR
2TR-P12 Lv.1 Details
8-208
COPIER>ADJUST>HV-TR
2TR-N13 Lv.1 Details SectrnsATVCcrrnt:highhmdypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof plain/plain2/thinpaperatsecondarytransferATVCcontrol(in highhumidity,600dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:highhmdypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof plain/plain2/thinpaperatsecondarytransferATVCcontrol(in highhumidity,600dpi). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-P22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:normhmdycrd1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof postcard/envelopeatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:normhmdycrd2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof postcard/envelopeatsecondarytransferATVCcontrol(innormal humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-N23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-208
8
COPIER>ADJUST>HV-TR
2TR-H13 Lv.1 Details
8-209
COPIER>ADJUST>HV-TR
2TR-UH13 Lv.1 Details SectrnsATVCcrrnt:highhmdyexthvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof extraheavypaperatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:highhmdyexthvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof extraheavypaperatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-H23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:highhmdyhvy1st Toadjusttheoffsetvalueoftargetcurrentforthe1stside ofheavypaperatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:highhmdyhvy2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndside ofheavypaperatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-UH23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-209
8
COPIER>ADJUST>HV-TR
2TR-P13 Lv.1 Details
8-210
COPIER>ADJUST>HV-TR
2TR-O1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-O12 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SectrnsATVCtgtcrrnt:lowhmdytransp Toadjusttheoffsetvalueoftargetcurrentforthetransparencyat secondarytransferATVCcontrol(inlowhumidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCtgtcrrnt:normhmdytransp Toadjusttheoffsetvalueoftargetcurrentforthetransparencyat secondarytransferATVCcontrol(innormalhumidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-P23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:highhmdycrd1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof postcard/envelopeatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:highhmdycrd2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof postcard/envelopeatsecondarytransferATVCcontrol(inhigh humidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 -
8-210
8
COPIER>ADJUST>HV-TR
2TR-O13 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-HN2 Lv.1 Details
8-211
COPIER>ADJUST>HV-TR
1TR-TGKT Lv.1 Details PrytrnsATVCBktgtcrrntadj:Bkonly ToadjusttheoffsetofprimarytransferATVCcontroltarget currentinB&Wmode. Asthevalueisincrementedby1,theoffsetchangesby1uA. Ifthevalueistoolarge,foggingetc.duetotransfermemory occursandifitistoosmall,transferfailureetc.occurs. WhentheimagefailureduetoprimarytransferoccursinB&W mode 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)ExecutetheprimarytransferATVC(open/closetheFront Coveretc.) -50to50 1uA -10to20 0 COPIER>ADJUST>HV-TR>1TR-TGY,1TR-TGM,1TR-TGC, 1TR-TGK SectrnsATVCcrrnt:lowhmdythin1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideofthin paperatsecondarytransferATVCcontrol(inlowhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCtgtcrrnt:highhmdytransp Toadjusttheoffsetvalueoftargetcurrentforthetransparencyat secondarytransferATVCcontrol(inhighhumidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 0.2uA -20to20 0 SectrnsATVCcrrnt:lowhmdyhvypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (inlowhumidity). Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N2 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-T1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-211
8
COPIER>ADJUST>HV-TR
2TR-T2 Lv.1 Details
8-212
COPIER>ADJUST>HV-TR
2TR-T22 Lv.1 Details SectrnsATVCcrrnt:normhmdythin2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideofthin paperatsecondarytransferATVCcontrol(innormalhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N22 SectrnsATVCcrrnt:highhmdythin1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideofthin paperatsecondarytransferATVCcontrol(inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N13 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-T12 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:lowhmdythin2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideofthin paperatsecondarytransferATVCcontrol(inlowhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N2 SectrnsATVCcrrnt:normhmdythin1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideofthin paperatsecondarytransferATVCcontrol(innormalhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N12 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-T13 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-212
8
COPIER>ADJUST>HV-TR
2TR-T23 Lv.1 Details
8-213
COPIER>ADJUST>HV-TR
2TR-R2 Lv.1 Details SectrnsATVCcrrnt:lowhmdyrcycl2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndside ofrecycledpaperatsecondarytransferATVCcontrol(inlow humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N2 SectrnsATVCcrrnt:normhmdyrcycl1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof recycledpaperatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N12 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-R1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:highhmdythin2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideofthin paperatsecondarytransferATVCcontrol(inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Increase/decreasethevalueby1whilecheckingthesymptom eachtime. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N23 SectrnsATVCcrrnt:lowhmdyrcycl1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof recycledpaperatsecondarytransferATVCcontrol(inlow humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-R12 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-213
8
COPIER>ADJUST>HV-TR
2TR-R22 Lv.1 Details
8-214
COPIER>ADJUST>HV-TR
2TR-R23 Lv.1 Details SectrnsATVCcrrnt:highhmdyrcycl2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof recycledpaperatsecondarytransferATVCcontrol(inhigh humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N23 SectrnsATVCcrrnt:lowhmdyhvypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (inlowhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-R13 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:normhmdyrcycl2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof recycledpaperatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N22 SectrnsATVCcrrnt:highhmdyrcycl1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof recycledpaperatsecondarytransferATVCcontrol(inhigh humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N13 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-HN1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-214
8
COPIER>ADJUST>HV-TR
2TR-HN12 Lv.1 Details
8-215
COPIER>ADJUST>HV-TR
2TR-HN13 Lv.1 Details SectrnsATVCcrrnt:highhmdyhvypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N13 SectrnsATVCcrrnt:highhmdyhvypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N23 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-HN22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:normhmdyhvypln1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (innormalhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N12 SectrnsATVCcrrnt:normhmdyhvypln2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof relativelyheavyplainpaperatsecondarytransferATVCcontrol (innormalhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N22 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-HN23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-215
8
COPIER>ADJUST>HV-TR
2TR-SH1 Lv.1 Details
8-216
COPIER>ADJUST>HV-TR
2TR-SH12 Lv.1 Details SectrnsATVCcrrnt:normhmdyhvy21st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof heavy2paperatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H12 SectrnsATVCcrrnt:normhmdyhvy22nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof heavy2paperatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H22 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-SH2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:lowhmdyhvy21st Toadjusttheoffsetvalueoftargetcurrentforthe1stside ofheavy2paperatsecondarytransferATVCcontrol(inlow humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H1 SectrnsATVCcrrnt:lowhmdyhvy22nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndside ofheavy2paperatsecondarytransferATVCcontrol(inlow humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H2 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-SH22 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-216
8
COPIER>ADJUST>HV-TR
2TR-SH13 Lv.1 Details
8-217
COPIER>ADJUST>HV-TR
2TR-E2 Lv.1 Details SectrnsATVCcrrnt:lowhmdyenvlp2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof envelopeatsecondarytransferATVCcontrol(inlowhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P2 SectrnsATVCcrrnt:normhmdyenvlp1st Toadjusttheoffsetvalueoftargetcurrentforthe1stside ofenvelopeatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P12 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-E1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:highhmdyhvy21st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof heavy2paperatsecondarytransferATVCcontrol(inhigh humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H13 SectrnsATVCcrrnt:lowhmdyenvlp1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof envelopeatsecondarytransferATVCcontrol(inlowhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-E12 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-217
8
COPIER>ADJUST>HV-TR
2TR-E22 Lv.1 Details
8-218
COPIER>ADJUST>HV-TR
2TR-E23 Lv.1 Details SectrnsATVCcrrnt:highhmdyenvlp2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndsideof envelopeatsecondarytransferATVCcontrol(inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P23 SectrnsATVCcrrnt:highhmdyhvy22nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndside ofheavy2paperatsecondarytransferATVCcontrol(inhigh humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-H23 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-E13 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SectrnsATVCcrrnt:normhmdyenvlp2nd Toadjusttheoffsetvalueoftargetcurrentforthe2ndside ofenvelopeatsecondarytransferATVCcontrol(innormal humidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P22 SectrnsATVCcrrnt:highhmdyenvlp1st Toadjusttheoffsetvalueoftargetcurrentforthe1stsideof envelopeatsecondarytransferATVCcontrol(inhighhumidity). Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasaccordingtothe conditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-P13 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-SH23 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-218
8
COPIER>ADJUST>HV-TR
2TR-OFF Lv.1 Details
8-219 FEED-ADJ
COPIER>ADJUST>FEED-ADJ
REGIST Lv.1 Details Adjofrgststarttiming:Plainpaper ToadjustthetimingtoturnONtheRegistrationMotorinthecase ofplainpaper. Asthevalueisincrementedby1,themarginontheleading edgeofpaperisincreasedby0.1mm. +:Topmarginbecomessmaller.(Animagemovesupward.) -:Topmarginbecomeslarger.(Animagemovesdownward.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. Donotusethisatthenormalservice. -50to50 0.1mm 0 Cassette1writestartpstninhorzscan Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromtheCassette1. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
BatchadjofsectrnsATVCtargetcrrnt Tocollectivelyadjusttheoffsetvaluesoftargetcurrentin secondarytransferATVCcontrolregardlessofconditions. Ifthevalueistoolarge,densitylossduetoexcessivetransferor high-voltagemottledimageetc.occursandifitistoosmall,burst imageormottledimageetc.occurs. Whenadjustingthesecondarytransferbiasifthesamesymptom occursregardlessofconditions Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -128to127 1uA -20to20 0 COPIER>ADJUST>HV-TR>2TR-N1,etc. T-8-30
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-C1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-219
8
COPIER>ADJUST>FEED-ADJ
ADJ-C2 Lv.1 Details
8-220
COPIER>ADJUST>FEED-ADJ
ADJ-C4 Lv.1 Details Cassette4writestartpstninhorzscan Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromtheCassette4. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 Writestartpstninhorzscan:MPtray Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromtheMulti-purposeTray. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-C3 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Cassette2writestartpstninhorzscan Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromtheCassette2. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 Cassette3writestartpstninhorzscan Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromtheCassette3. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-MF Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-220
8
COPIER>ADJUST>FEED-ADJ
ADJ-DK Lv.1 Details
8-221
COPIER>ADJUST>FEED-ADJ
ADJ-C2RE Lv.1 Details Writestartpstninhorzscan:Cst22nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromtheCassette2. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 Writestartpstninhorzscan:Cst32nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromtheCassette3. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-C1RE Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Writestartpstninhorzscan:PprDeck Toadjusttheimagewritestartpositioninthehorizontalscanning directionwhenfeedingpaperfromthePaperDeck. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheDCControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 Writestartpstninhorzscan:Cst12nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromtheCassette1. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-C3RE Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-221
8
COPIER>ADJUST>FEED-ADJ
ADJ-C4RE Lv.1 Details
8-222
COPIER>ADJUST>FEED-ADJ
ADJ-MFRE Lv.1 Details Writestartpstninhorzscan:MPTray2nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromtheMulti-purpose Tray. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 Rgststarttimingadj:Heavy,1/2speed ToadjustthetopmarginbychangingthetimingtoturnONthe RegistrationMotorwhenfeedingheavypaper. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Topmarginbecomessmaller.(Animagemovesupward.) -:Topmarginbecomeslarger.(Animagemovesdownward.) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJ-DKRE Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Writestartpstninhorzscan:Cst42nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromtheCassette4. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger(Animagemovestotheright.) -:Leftmarginbecomessmaller(Animagemovestotheleft.) WhenreplacingtheReaderControllerPCB/clearingRAMdata, enterthevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 Writestartpstninhorzscan:Deck2nd Toadjusttheimagewritestartpositioninthehorizontalscanning directionfor2ndsidewhenfeedingpaperfromthePaperDeck. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Leftmarginbecomeslarger.(Animagemovestotheright.) -:Leftmarginbecomessmaller.(Animagemovestotheleft.) WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -100to100 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-THCK Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-222
8
COPIER>ADJUST>FEED-ADJ
REG-OHT Lv.1 Details
8-223
COPIER>ADJUST>FEED-ADJ
REG-DUP2 Lv.1 Details Rgststarttimingadj:Heavy,2ndside ToadjustthetopmarginbychangingthetimingtoturnON theRegistrationMotorwhenfeedingthesecondsideofheavy paper. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Topmarginbecomessmaller.(Animagemovesupward.) -:Topmarginbecomeslarger.(Animagemovesdownward.) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 Cassettepre-rgstarchamount:Plain Toadjustthearchamountbeforeregistrationwhenfeedingplain paperfromthecassette. Asthevalueisincrementedby1,thepre-registrationarch amountchangesby0.5mm. +:Increase -:Decrease Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.5mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REG-DUP1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Rgststarttimingadj:Transparency ToadjustthetopmarginbychangingthetimingtoturnONthe RegistrationMotorwhenfeedingtransparency. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Topmarginbecomessmaller.(Animagemovesupward.) -:Topmarginbecomeslarger.(Animagemovesdownward.) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 Rgststarttimingadj:Plain,2ndside ToadjustthetopmarginbychangingthetimingtoturnONthe RegistrationMotorwhenfeedingthesecondsideofplainpaper. Asthevalueisincrementedby1,themarginontheleftedgeof paperisincreasedby0.1mm. +:Topmarginbecomessmaller.(Animagemovesupward.) -:Topmarginbecomeslarger.(Animagemovesdownward.) Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.1mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LP-FEED1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-223
8
COPIER>ADJUST>FEED-ADJ
LP-MULT1 Lv.1 Details
8-224
COPIER>ADJUST>FEED-ADJ
REG-SPD Lv.1 Details SpeedadjustmentofRegistrationMotor Toadjust1/1speedoftheRegistrationMotor. Asthevalueisincrementedby1,thespeedisincreasedby0.2%. +:Speedup -:Slowdown Whenthevalueisdecreased,theblurryimageataround40to 45mmfromtheimagetrailingedgeisalleviated. Whenblurryimageoccursataround40to45mmfromtheimage trailingedge Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -5to5 0.20% 0 T-8-31
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LP-DUP1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
MPTraypre-rgstarchamount:Plain Toadjustthearchamountbeforeregistrationwhenfeedingplain paperfromtheMulti-purposeTray. Asthevalueisincrementedby1,thepre-registrationarch amountchangesby0.5mm. +:Increase -:Decrease Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.5mm 0 Duplexpre-rgstarchamount:Plain Toadjustthearchamountbeforeregistrationwhenfeedingplain paperinduplexmode. Asthevalueisincrementedby1,thepre-registrationarch amountchangesby0.5mm. +:Increase -:Decrease Enterthesettingvalue(switchnegative/positiveby-/+key)and pressOKkey. -50to50 0.5mm 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-224
8
CST-ADJ
COPIER>ADJUST>CST-ADJ
MF-A4R Lv.1 Details
8-225
COPIER>ADJUST>CST-ADJ
MF-A4 Lv.1 Details AdjofMPTrayA4paperwidth ToadjustthewidthofA4paperintheMulti-purposeTray. WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. Whenregisteringanewvalue,executeCOPIER>FUNCTION> CST>A4. WhenreplacingtheDCControllerPCB/clearingRAMdata Whenregisteringanewvalue. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 0to255 0 COPIER>FUNCTION>CST>A4 T-8-32
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MF-A6R Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjofMPTrayA4Rpaperwidth ToadjustthewidthofA4RpaperintheMulti-purposeTray. WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. Whenregisteringanewvalue,executeCOPIER>FUNCTION> CST>A4R. WhenreplacingtheDCControllerPCB/clearingRAMdata Whenregisteringanewvalue. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 0to255 0 COPIER>FUNCTION>CST>A4R AdjofMPTrayA6Rpaperwidth ToadjustthewidthofA6RpaperintheMulti-purposeTray. WhenreplacingtheDCControllerPCB/clearingRAMdata,enter thevalueofservicelabel. Whenregisteringanewvalue,executeCOPIER>FUNCTION> CST>A6R. WhenreplacingtheDCControllerPCB/clearingRAMdata Whenregisteringanewvalue. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Afterthesettingvalueischanged,writethechangedvalueinthe servicelabel. 0to255 0 COPIER>FUNCTION>CST>A6R -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-225
8
MISC
COPIER>ADJUST>MISC
SEG-ADJ Lv.1 Details
8-226
COPIER>ADJUST>MISC
ACS-ADJ Lv.1 Details SetcriteriaforB&W/colorinACS:front TosetthejudgmentlevelofB&W/colororiginalinACSmode. Asthevalueisincreased,theoriginaltendstobedetectedas aB&Wdocument,andasthevalueisdecreased,theoriginal tendstobedetectedasacolordocument. WhenadjustingthecolordetectionlevelinACSmode 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 SetjudgmentareainACSmode:frontside TosetthejudgmentareainACSmode. Asthegreatervalueisset,thejudgmentareaiswidened. WhenadjustingthejudgmentareainACSmode 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 1 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo K-ADJ Lv.1 Details Usecase Adj/set/operatemethod
Setcriteriafortext/photo:frontside Tosetthejudgmentleveloftext/photooriginalinText/Photo/Map mode. Asthevalueisincreased,theoriginaltendstobedetectedas aphotodocument,andasthevalueisdecreased,theoriginal tendstobedetectedasatextdocument. When adjusting the classification level of text and photo in Text/ Photo/Mapmode 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. -4to4 0 Setcriteriaforblacktext:frontside Tosetthejudgmentlevelofblackcharactersattextprocessing. Asthevalueisincreased,thetexttendstobedetectedasblack. Whenpreferringthetexttobejudgedasblack 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACS-EN Lv.2 Details Usecase Adj/set/operatemethod
8-226
8
COPIER>ADJUST>MISC
ACS-CNT Lv.2 Details
8-227
COPIER>ADJUST>MISC
ACS-CNT2 Lv.2 Details SetACSjdgmtpixelcountareainDADF Tosettheareawhichcountsthepixeltojudgethecolor presenceinACSmodeatDADFreading. Asthegreatervalueisset,thejudgmentareaiswiden. Whenadjustingtheareawhichcountsthepixeltojudgethe colorpresenceinACSmodeatDADFreading 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 0 SetReosprocessingcoeffctat1200dpi To set an optimal Reos processing coefficient for 1200dpi print. PrintPGofthetype55inCOPIER>TEST>PG>TYPE,check theimagesinthe4areasofthisPG,andspecifythenumber oftheareainwhichthecharacterproportionandlinewidth becomeoptimumbytheReosprocessingmoduleinthecaseof PDL1200dpisetting. Afterthesettingisdone,outputtheverticalandhorizontal patternswith3dotsand10spaces,whicharethesameasthe PG above, in 1200 dpi, and confirm that the result is the same as the specified area. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to4 2 COPIER>TEST>PG>TYPE -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACS-EN2 Lv.2 Details Usecase Adj/set/operatemethod
SetjdgmtpixelcountareainACS:front Tosettheareawhichcountsthepixeltojudgethecolor presenceinACSmode. Asthegreatervalueisset,thejudgmentareaiswidened. Whenadjustingtheareawhichcountsthepixeltojudgethe colorpresenceinACSmode 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 0 SetACSmodejdgmtareainDADFmode TosetthejudgmentareainACSmodeatDADFreading. Asthegreatervalueisset,thejudgmentareaiswidened. WhenadjustingthejudgmentareainACSmodeatDADF reading 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 1 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REOS-PG Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-227
8
COPIER>ADJUST>MISC
SEG-ADJ3 Lv.1 Details
8-228
COPIER>ADJUST>MISC
ACS-ADJ3 Lv.1 Details SetACSB&W/colorjdgmtstdrd:backside TosetthejudgmentlevelofB&W/colororiginalinACSmode (backsideatduplexreadingwith1path). Asthevalueisincreased,theoriginaltendstobedetectedas aB&Wdocument,andasthevalueisdecreased,theoriginal tendstobedetectedasacolordocument. WhenadjustingthecolordetectionlevelinACSmode(backside atduplexreadingwith1path) 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 SetofACSmodejdgmtarea:backside TosetthejudgmentareainACSmode(backsideatduplex readingwith1path). Asthegreatervalueisset,thejudgmentareaiswidened. WhenadjustingthejudgmentareainACSmode(backsideat duplexreadingwith1path) 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 1 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo K-ADJ3 Lv.1 Details
Usecase Adj/set/operatemethod
Settext/photojdgmtstdrd:backside Tosetthejudgmentleveloftext/photooriginalinText/Photo/Map mode(backsideatduplexreadingwith1path). Asthevalueisincreased,theoriginaltendstobedetectedas aphotodocument,andasthevalueisdecreased,theoriginal tendstobedetectedasatextdocument. When adjusting the classification level of text and photo in Text/ Photo/Mapmode(backsideatduplexreadingwith1path) 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -4to4 0 SetBktextjdgmtstdrd:backside Tosetthejudgmentlevelofblackcharactersattextprocessing (backsideatduplexreadingwith1path). Asthevalueisincreased,thetexttendstobedetectedasblack. Whenpreferringthetexttobejudgedasblack(backsideat duplexreadingwith1path) 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ACS-EN3 Lv.2 Details
Usecase Adj/set/operatemethod
8-228
8
COPIER>ADJUST>MISC
ACS-CNT3 Lv.2 Details
8-229
COPIER>ADJUST>MISC
SH-ADJ Lv.1 Details Adjustmentofsharpness Toadjustthesharpnessofthefollowingimageswhicharesetin theusermode: -Imagetobereadinthecopyboardreadingmode - Image on the first side of a document to be read in the reverse-pathduplexstreamreadingmode - Image on the first side of a document to be read in the 1-path duplexstreamreadingmode Asthegreatervalueisset,theimagegetssharper. Ifthevalueistoolarge,moireislikelytooccurinanoutput imageofCOPYandSEND. Tomatchtheimagequalitywiththatofthesecondsideinthe 1-pathduplexstreamreadingmode,decreasethevaluewhen moire on the first side is stronger than the second side and increasethevaluewhenitisweaker. WhenmoirefrequentlyoccursonimagesofCOPYandSEND output 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 COPIER>ADJUST>MISC>SH-ADJ2 Settings/Registration>Adjustment/Maintenance>AdjustImage Quality>Sharpness -
Usecase
Adj/set/operatemethod
ACSmodejdgmtpixelcountarea:back Tosettheareawhichcountsthepixeltojudgethecolor presenceinACSmode(backsideatduplexreadingwith1path). Asthegreatervalueisset,thejudgmentareaiswiden. Whenadjustingtheareawhichcountsthepixeltojudgethe colorpresenceinACSmode(backsideatduplexreadingwith1 path) 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 0 -
Usecase Adj/set/operatemethod
8-229
8
COPIER>ADJUST>MISC
SH-ADJ2 Lv.1 Details
8-230 EXP-LED
COPIER>ADJUST>EXP-LED
PR-EXP-Y Lv.2 Details SettingofYPre-exposureLEDcurrent TosetthecurrentofYPre-exposureLED. Increasethevaluewhentakingameasurefordrumghost. Decreasethevaluewhenpotentialisnotappliedwell. When drum ghost is significant (drum pitch is not correct) Whenpotentialisnotappliedwell 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to15 1/16% 10to15 0 SettingofMPre-exposureLEDcurrent TosetthecurrentofMPre-exposureLED. Increasethevaluewhentakingameasurefordrumghost. Decreasethevaluewhenpotentialisnotappliedwell. When drum ghost is significant (drum pitch is not correct) Whenpotentialisnotappliedwell 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to15 1/16% 10to15 0 -
Usecase Adj/set/operatemethod
Sharpnesssettingchangefunction Toadjustthesharpnessofimagesonthesecondsideofa document,whichissetintheusermode,inthe1-pathduplex streamreadingmode. Asthegreatervalueisset,theimagegetssharper. Ifthevalueistoolarge,moireislikelytooccurinanoutput imageofCOPYandSEND. Tomatchtheimagequalitywiththatofthesecondsideinthe 1-pathduplexstreamreadingmode,decreasethevaluewhen moire on the first side is stronger than the second side, and increasethevaluewhenitisweaker. WhenmoirefrequentlyoccursonimagesofCOPYandSEND output 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -3to3 0 COPIER>ADJUST>MISC>SH-ADJ Settings/Registration>Adjustment/Maintenance>AdjustImage Quality>Sharpness T-8-33
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PR-EXP-M Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-230
8
COPIER>ADJUST>EXP-LED
PR-EXP-C Lv.2 Details
8-231
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PR-EXP-K Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofCPre-exposureLEDcurrent TosetthecurrentofCPre-exposureLED. Increasethevaluewhentakingameasurefordrumghost. Decreasethevaluewhenpotentialisnotappliedwell. When drum ghost is significant (drum pitch is not correct) Whenpotentialisnotappliedwell 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to15 1/16% 10to15 0 SettingofBkPre-exposureLEDcurrent TosetthecurrentofBkPre-exposureLED. Increasethevaluewhentakingameasurefordrumghost. Decreasethevaluewhenpotentialisnotappliedwell. When drum ghost is significant (drum pitch is not correct) Whenpotentialisnotappliedwell 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to15 1/16% 10to15 0 T-8-34
8-231
8
COPIER
FUNCTION
INSTALL
COPIER>FUNCTION>INSTALL
STIR-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STIR-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-232
COPIER>FUNCTION>INSTALL
STIR-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STIR-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo StirringofCcolordeveloper TostirdeveloperintheCDevelopingAssembly. Atinstallationofthemachine Atoccurrenceofanimagefailure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.60seconds(C5051/5045),Approx.90seconds (C5035/5030) COPIER>FUNCTION>INSTALL>STIR-Y,STIR-M,STIR-K, STIR-4 StirringofBkcolordeveloper TostirdeveloperintheBkDevelopingAssembly. Atinstallationofthemachine Atoccurrenceofanimagefailure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.60seconds(C5051/5045),Approx.90seconds (C5035/5030) COPIER>FUNCTION>INSTALL>STIR-Y,STIR-M,STIR-C, STIR-4 -
StirringofYcolordeveloper TostirdeveloperintheYDevelopingAssembly. Atinstallationofthemachine Atoccurrenceofanimagefailure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.60seconds(C5051/5045),Approx.90seconds (C5035/5030) COPIER>FUNCTION>INSTALL>STIR-M,STIR-C,STIR-K, STIR-4 StirringofMcolordeveloper TostirdeveloperintheMDevelopingAssembly. Atinstallationofthemachine Atoccurrenceofanimagefailure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.60seconds(C5051/5045),Approx.90seconds (C5035/5030) COPIER>FUNCTION>INSTALL>STIR-Y,STIR-C,STIR-K, STIR-4 -
8-232
8
COPIER>FUNCTION>INSTALL
STIR-4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STRD-POS Lv.1 Details Usecase Adj/set/operatemethod
8-233
COPIER>FUNCTION>INSTALL
CARD Lv.1 Details Cardnumbersetting TosetthecardnumbertobeusedforCardReader. Aseriesofnumbersfromtheenterednumbertothenumberof cards specified by CARD-RNG can be used. AtinstallationoftheCardReader AfterreplacementoftheHDD 1)Enterthenumber,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thecardmanagementinformation(departmentIDand password)isinitialized. 0to2001 0 COPIER>OPTION>FNC-SW>CARD-RNG(Level2) ON/OFFofmanagementkeyfunction Tosetwhethertoenableordisablethemanagementkey function. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Stirringofallcolordeveloper TostirdeveloperintheDevelopingAssembliesof4colors(Y/M/ C/Bk). Atinstallationofthemachine Atoccurrenceofanimagefailure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.60seconds(C5051/5045),Approx.90seconds (C5035/5030) COPIER>FUNCTION>INSTALL>STIR-Y,STIR-M,STIR-C, STIR-K ScanpositionautoadjinDADFmode ToadjusttheDADFscanningpositionautomatically. AtDADFinstallation/uninstallation 1)Setapaperforstreamreadingpositionadjustment,andthen closetheDADF. 2)Selecttheitem,andthenpressOKkey. Theoperationautomaticallystopsaftertheadjustment. 3)WritethevaluedisplayedbyCOPIER>ADJUST>ADJXY>STRD-POSintheservicelabel. Writetheadjustedvalueintheservicelabel. Atnormaltermination:OK,Atabnormaltermination:NG Approx.10seconds COPIER>ADJUST>ADJ-XY>STRD-POS -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo KEY Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
0 -
8-233
8
COPIER>FUNCTION>INSTALL
INISET-Y Lv.1 Details
8-234
COPIER>FUNCTION>INSTALL
INISET-M Lv.1 Details ExeofMDevAss'yinitialinstallmode Toautomaticallyexecuteoperationnecessaryforinitial installationoftheMDevelopingAssembly. 1.IdlerotationoftheDevelopingAssembly 2.InitializationoftheTonerDensitySensor 3.SecondarytransferATVCcontrol 4.Patchlightintensitycorrection 5.Backgroundcorrection 6.Dischargecurrentcontrol 7.PrimarytransferATVCcontrol 8.InitializationofthePatchSensor 9.Autoregistration 10. D-maxcontrol 11. D-halfcontrol 12. ARCDAT-Lite(createsthetarget) 13. CleaningoftheSecondaryTransferOuterRoller(twice) 14. CounterresetoftheDevelopingAssembly WhenreplacingtheMDevelopingAssembly Selecttheitem,andthenpressOKkey. WheninstallingthemachineorreplacingtheDeveloping Assemblyofothercolor,donotusethisitem.. Executethisitemaftersetting"AINR-OFF"to"1:ON". Duringoperation:xxxsecond(remainingtime),Atnormal termination:OK,Atabnormaltermination:NG 155seconds COPIER>FUNCTION>INSTALL>INISET-Y,INISET-C, INISET-K,INISET-4,AINR-OFF -
ExeofYDevAss'yinitialinstallmode Toautomaticallyexecuteoperationnecessaryforinitial installationoftheYDevelopingAssembly. 1.IdlerotationoftheDevelopingAssembly 2.InitializationoftheTonerDensitySensor 3.SecondarytransferATVCcontrol 4.Patchlightintensitycorrection 5.Backgroundcorrection 6.Dischargecurrentcontrol 7.PrimarytransferATVCcontrol 8.InitializationofthePatchSensor 9.Autoregistration 10. D-maxcontrol 11. D-halfcontrol 12. ARCDAT-Lite(createsthetarget) 13. CleaningoftheSecondaryTransferOuterRoller(twice) 14. CounterresetoftheDevelopingAssembly WhenreplacingtheYDevelopingAssembly Selecttheitem,andthenpressOKkey. WheninstallingthemachineorreplacingtheDeveloping Assemblyofothercolor,donotusethisitem.. Executethisitemaftersetting"AINR-OFF"to"1:ON". Duringoperation:xxxsecond(remainingtime),Atnormal termination:OK,Atabnormaltermination:NG 155seconds COPIER>FUNCTION>INSTALL>INISET-M,INISET-C, INISET-K,INISET-4,AINR-OFF -
8-234
8
COPIER>FUNCTION>INSTALL
INISET-C Lv.1 Details
8-235
COPIER>FUNCTION>INSTALL
AINR-OFF Lv.1 Details ON/OFFofwarm-uprotationdeactivation TosetON/OFFtodisableexecutionofwarm-uprotation. Warm-uprotationcanbeomittedwhenturningOFF/ONthe powertochecktheimage,etc.aftertheadjustmentofwarm-up rotation,etc.Thismodeisexecutedwhenwarm-uprotationis notneeded. Atinstallation WhenreplacingtheDevelopingAssembly 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Besuretoenabletheoperation(canceldisabling)beforethe machineisusedbytheuser.Theoperationisautomatically enabledbyexecutingINISET-Y/M/C/K/4. 0to1 0:OFF(Warm-uprotationenabled),1:ON(Warm-uprotation disabled) 0 COPIER>FUNCTION>INSTALL>INISET-Y,INISET-M, INISET-C,INISET-K,INISET-4 Setuse/nouseofEmbedded-RDSfunction TosetwhethertousetheEmbedded-RDSfunction. WhenusingEmbedded-RDS 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. BesuretouseE-RDS,RGW-PORT,COM-TEST,COM-LOG andRGW-ADRasaset. 0to1 0:Functionnotused,1:Functionused(Allthecounter informationissent.) 0 COPIER>FUNCTION>INSTALL>RGW-PORT,COM-TEST, COM-LOG,RGW-ADR Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol
ExeofCDevAss'yinitialinstallmode Toautomaticallyexecuteoperationnecessaryforinitial installationoftheCDevelopingAssembly. 1.IdlerotationoftheDevelopingAssembly 2.InitializationoftheTonerDensitySensor 3.SecondarytransferATVCcontrol 4.Patchlightintensitycorrection 5.Backgroundcorrection 6.Dischargecurrentcontrol 7.PrimarytransferATVCcontrol 8.InitializationofthePatchSensor 9.Autoregistration 10. D-maxcontrol 11. D-halfcontrol 12. ARCDAT-Lite(createsthetarget) 13. CleaningoftheSecondaryTransferOuterRoller(twice) 14. CounterresetoftheDevelopingAssembly WhenreplacingtheCDevelopingAssembly Selecttheitem,andthenpressOKkey. WheninstallingthemachineorreplacingtheDeveloping Assemblyofothercolor,donotusethisitem.. Executethisitemaftersetting"AINR-OFF"to"1:ON". Duringoperation:xxxsecond(remainingtime),Atnormal termination:OK,Atabnormaltermination:NG 155seconds COPIER>FUNCTION>INSTALL>INISET-Y,INISET-M, INISET-K,INISET-4,AINR-OFF -
Display/adj/setrange
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo E-RDS Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-235
8
COPIER>FUNCTION>INSTALL
RGW-PORT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-236
COPIER>FUNCTION>INSTALL
COM-LOG Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Disconnecterrorw/SalesCo'sserver Todisplayerrorinformationwhentheconnectionwiththesales company'sserverfailed. WhenusingEmbedded-RDS Displayonly BesuretouseE-RDS,RGW-PORT,COM-TEST,COM-LOG andRGW-ADRasaset. Year,date,time,errorcode,errordetailinformation(maximum 128characters) COPIER>FUNCTION>INSTALL>E-RDS,RGW-PORT,COMTEST,RGW-ADR Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol URLsettingofSalesCompany'sserver TosettheURLofthesalescompany'sservertobeusedfor Embedded-RDS. WhenusingEmbedded-RDS 1)SelecttheURL. 2)EntertheURL,andthenpressOKkey. 3)TurnOFF/ONthemainpowerswitch. DonotuseShift-JIScharacterstrings. BesuretouseE-RDS,RGW-PORT,COM-TEST,COM-LOG andRGW-ADRasaset. URL https://a01.ugwdevice.net/ugw/agentif010 COPIER>FUNCTION>INSTALL>E-RDS,RGW-PORT,COMTEST,COM-LOG Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol
COM-TEST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetportnumberofSalesCo'sserver Tosettheportnumberofthesalescompany'sservertobeused forEmbedded-RDS. WhenusingEmbedded-RDS 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. BesuretouseE-RDS,RGW-PORT,COM-TEST,COM-LOG andRGW-ADRasaset. 1to65535 443 COPIER>FUNCTION>INSTALL>E-RDS,COM-TEST,COMLOG,RGW-ADR Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol Disconnectresultw/SalesCo'sserver Todisplaytheresultoftheconnectiontestwiththesales company'sserver. WhenusingEmbedded-RDS Selecttheitem,andthenpressOKkey. BesuretouseE-RDS,RGW-PORT,COM-TEST,COM-LOG andRGW-ADRasaset. Duringoperation:ACTIVE,Whenconnectioniscompleted:OK, Whenconnectionisfailed:NG COPIER>FUNCTION>INSTALL>E-RDS,RGW-PORT,COMLOG,RGW-ADR Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol
Caution
8-236
8
COPIER>FUNCTION>INSTALL
CNT-DATE Lv.1 Details
8-237
COPIER>FUNCTION>INSTALL
INISET-4 Lv.1 Details AllcolorDevAss'yinitialinstallmode Toautomaticallyexecuteoperationnecessaryforinitial installationoftheDevelopingAssembliesof4colors(Y,M,C, Bk). 1.IdlerotationoftheDevelopingAssembly 2.InitializationoftheTonerDensitySensor 3.SecondarytransferATVCcontrol 4.Patchlightintensitycorrection 5.Backgroundcorrection 6.Dischargecurrentcontrol 7.PrimarytransferATVCcontrol 8.InitializationofthePatchSensor 9.Autoregistration 10. D-maxcontrol 11. D-halfcontrol 12. ARCDAT-Lite(createsthetarget) 13. CleaningoftheSecondaryTransferOuterRoller(twice) 14. CounterresetoftheDevelopingAssembly Atinstallation WhenreplacingtheDevelopingAssembliesofallcolors Selecttheitem,andthenpressOKkey. UsethisitemonlywhenreplacingDevelopingAssembliesof4 colorssimultaneously. Executethisitemaftersetting"AINR-OFF"to"1:ON". Duringoperation:xxxsecond(remainingtime),Atnormal termination:OK,Atabnormaltermination:NG 155seconds COPIER>FUNCTION>INSTALL>INISET-Y,INISET-M, INISET-C,INISET-K,AINR-OFF -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetcountersendstartdatetoSCserver Tosettheyear,month,date,hourandminutetosendcounter informationtothesalescompany'sserver. ThisisdisplayedonlywhentheEmbedded-RDSthird-party extendedfunctionisavailable. WhentheEmbedded-RDSthird-partyexpandedfunctionis available 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. YYYYMMDDHHMM(12digits) YYYY:Year,MM:Month,DD:Date,HH:Hour,MM:Minute 000000000000 Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol SetcountersendintervaltoSCserver Tosettheintervalofsendingcounterinformationtothesales company'sserverinaunitofonehour. ThisisdisplayedonlywhentheEmbedded-RDSthird-party extendedfunctionisavailable. WhenrestartingthepotentialcontrolafterexecutingCOPIER> OPTION>IMG-FIX>PO-CNT. WhenD-maxcontrolconditionsarechanged 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to168(=1week) 1hour 24 Embedded-RDS:Functiontosenddeviceinformationsuchas thedevicecounter,failure,andconsumablesetc.tothesales company'sserverviaSOAPprotocol
8-237
8
COPIER>FUNCTION>INSTALL
INISET-K Lv.1 Details
8-238
COPIER>FUNCTION>INSTALL
BRWS-ACT Lv.1 Details ON/OFFofservicebrowser TosetwhethertosetON/OFFofthebrowserforservicing. When 2 is specified, the browser becomes enabled temporarily. Thismodecanbeusedwhencheckingoperation. Whenusingthebrowserforservicing Atoperationcheck 0to2 0:OFF,1:ON,2:OFFafterON 0 COPIER>DISPLAY>USER>BRWS-STS T-8-35
ExeofBkDevAss'yinitialinstallmode Toautomaticallyexecuteoperationnecessaryforinitial installationoftheBkDevelopingAssembly. 1.IdlerotationoftheDevelopingAssembly 2.InitializationoftheTonerDensitySensor 3.SecondarytransferATVCcontrol 4.Patchlightintensitycorrection 5.Backgroundcorrection 6.Dischargecurrentcontrol 7.PrimarytransferATVCcontrol 8.InitializationofthePatchSensor 9.Autoregistration 10. D-maxcontrol 11. D-halfcontrol 12. ARCDAT-Lite(createsthetarget) 13. CleaningoftheSecondaryTransferOuterRoller(twice) 14. CounterresetoftheDevelopingAssembly WhenreplacingtheBkDevelopingAssembly Selecttheitem,andthenpressOKkey. WheninstallingthemachineorreplacingtheDeveloping Assemblyofothercolor,donotusethisitem.. Executethisitemaftersetting"AINR-OFF"to"1:ON". Duringoperation:xxxsecond(remainingtime),Atnormal termination:OK,Atabnormaltermination:NG 155seconds COPIER>FUNCTION>INSTALL>INISET-Y,INISET-M, INISET-C,INISET-4,AINR-OFF -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-238
8
CCD
COPIER>FUNCTION>CCD
DF-WLVL1 Lv.1 Details
8-239
COPIER>FUNCTION>CCD
DF-LNR Lv.1 Details DerivingofDADFfront/backlinearity Toderivethefront/backsidelinearitycharacteristicsintheuseof DADFbasedonthescanningdataoftheDADFcomplexchart (No.2,No.10). WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthevalueofthereader'sservicelabel.(underCOPIER> ADJUST>CCD) DFCH-R2,DFCH-G2,DFCH-B2,DFCH-K2, DFCH-R10,DFCH-G10,DFCH-B10,DFCH-K10, DFCH2R2,DFCH2G2,DFCH2B2,DFCH2K2, DFCH2R10,DFCH2G10,DFCH2B10,DFCH2K10 2)Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>DFCH-R2,DFCH-G2,DFCH-B2, DFCH-K2,DFCH-R10,DFCH-G10,DFCH-B10,DFCH-K10, DFCH2R2,DFCH2G2,DFCH2B2,DFCH2K2,DFCH2R10, DFCH2G10,DFCH2B10,DFCH2K10 Deriving of MTF filter coefficient To derive the MTF filter coefficient to be set for ASIC based on theMTFvalueoftheDADFcomplexchart. WhenreplacingtheReaderControllerPCB/clearingRAMdata During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>MTF-M1toM12,MTF-S1toS12, MTF2-M1toM12,MTF2-S1toS12 ThescanningdataoftheDADFcomplexchartisindicatedinthe labeloftheScannerUnit(DADF/Reader).
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DF-WLVL2 Lv.1 Details Usecase
Relatedusermode Supplement/memo
Whiteleveladjinbookmode:color Toadjustthewhitelevelforcopyboardscanningautomatically bysettingthepaperwhichisusuallyusedbytheuseronthe CopyboardGlass. WhenreplacingtheCopyboardGlass WhenreplacingtheScannerUnit WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)SetpaperontheCopyboardGlass. 2)Selecttheitem,andthenpressOKkey. BesuretoexecuteDF-WLVL2inarow. During operation: ACTIVE, When the operation finished normally:OK! COPIER>FUNCTION>CCD>DF-WLVL2 COPIER>ADJUST>CCD>DFTBK-R,DFTBK-G,DFTBK-B WhiteleveladjinDADFmode:color ToadjustthewhitelevelforDADFscanningautomaticallyby settingthepaperwhichisusuallyusedbytheuserontheDADF. WhenreplacingtheCopyboardGlass WhenreplacingtheScannerUnit WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)SetpaperontheDADF. 2)Selecttheitem,andthenpressOKkey. BesuretoexecutethisitemafterDF-WLVL1. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>CCD>DF-WLVL1 COPIER>ADJUST>CCD>DFTAR-R,DFTAR-G,DFTAR-B, DFTAR2-R,DFTAR2-G,DFTAR2-B,DFTAR-BW,DFTAR2BW, DFTBK-R,DFTBK-G,DFTBK-B -
Usecase Adj/set/operatemethod
Relatedusermode Supplement/memo MTF-CLC Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-239
8
COPIER>FUNCTION>CCD
DF-WLVL3 Lv.1 Details
8-240
COPIER>FUNCTION>CCD
BW-TGT Lv.1 Details SetofB&Wshadingtargetvalue Afterthewhiteleveldata(X/Y/Z)fortheStandardWhitePlateis set,readtheStandardWhitePlateandsettheblackandwhite shadingtargetvalue. WhenreplacingtheCopyboardGlass/ScannerUnit BesuretoexecutethisitemafterexecutionofCOPIER> ADJUST>CCD>W-PLT-X,W-PLT-Y,W-PLT-Z. 1to2047 COPIER>ADJUST>CCD>W-PLT-X,W-PLT-Y,W-PLT-Z T-8-36
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DF-WLVL4 Lv.1 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Whiteleveladjinbookmode(B&W) Toadjustthewhitelevelforcopyboardscanningautomatically bysettingthepaperwhichisusuallyusedbytheuseronthe CopyboardGlass. WhenreplacingtheCopyboardGlass WhenreplacingtheScannerUnit WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)SetpaperontheCopyboardGlass. 2)Selecttheitem,andthenpressOKkey. BesuretoexecuteDF-WLVL4inarow. During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>DFTBK-BW WhiteleveladjinDADFmode(B&W) ToadjustthewhitelevelforDADFscanningautomaticallyby settingthepaperwhichisusuallyusedbytheuserontheDADF. WhenreplacingtheCopyboardGlass WhenreplacingtheScannerUnit WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)SetpaperontheDADF. 2)Selecttheitem,andthenpressOKkey. BesuretoexecutethisitemafterDF-WLVL3. During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>DFTAR-R,DFTAR-G,DFTAR-B, DFTAR2-R,DFTAR2-G,DFTAR2-B,DFTBK-BW -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-240
8
DPC
COPIER>FUNCTION>DPC
DRMRSETY Lv.1 Details
8-241
COPIER>FUNCTION>DPC
DRMRSETM Lv.1 Details ForcibleexeofMDrumreplacementmode WhenreplacementofDrumUnitiscompletedwithin30minutes, warm-uprotationmaynotbeexecutedatpower-off/onbecause of high fixing temperature. In such cases, drum potential becomesunstable,causinganimagefailuretooccur.Toprevent thissymptom,thisitemforciblyexecutesthesameoperation aswarm-uprotation.Atthistime,laserpowervalues,etc.,that werecorrectedaccordingtoMdrumcounter,totalchargingtime, targetVdvaluesforpotentialcontrolanddrumdurabilityare reset. WhendetectionoftheDrumUnitreplacementhasfailed WhentheDrumUnitusedinothermachineforawhileisused asadummyunit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthedrumreplacementmodeisenabled,itbecomes disabledautomaticallyafterexecution. UseaDrumUnitthatisnotclosetotheendoflifeasadummy unit.WhenusingaDrumUnitthatisclosetotheendoflife,it affectsthelifeofdeveloper,etc. 0to1 0:Disabled(Notexecuted),1:Enabled(Executed) 0 Approx.2minutes COPIER>FUNCTION>DPC>DRM-RSET,DRMRSETY, DRMRSETC,DRMRSETK -
Usecase
Adj/set/operatemethod
Caution
ForcibleexeofYDrumreplacementmode WhenreplacementofDrumUnitiscompletedwithin30minutes, warm-uprotationmaynotbeexecutedatpower-off/onbecause of high fixing temperature. In such cases, drum potential becomesunstable,causinganimagefailuretooccur.Toprevent thissymptom,thisitemforciblyexecutesthesameoperationas warm-uprotation.Atthistime,laserpowervalues,etc.,thatwere correctedaccordingtoYdrumcounter,totalchargingtime,target Vdvaluesforpotentialcontrolanddrumdurabilityarereset. WhendetectionoftheDrumUnitreplacementhasfailed WhentheDrumUnitusedinothermachineforawhileisused asadummyunit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthedrumreplacementmodeisenabled,itbecomes disabledautomaticallyafterexecution. UseaDrumUnitthatisnotclosetotheendoflifeasadummy unit.WhenusingaDrumUnitthatisclosetotheendoflife,it affectsthelifeofdeveloper,etc. 0to1 0:Disabled(Notexecuted),1:Enabled(Executed) 0 Approx.2minutes COPIER>FUNCTION>DPC>DRM-RSET,DRMRSETM, DRMRSETC,DRMRSETK -
Usecase
Adj/set/operatemethod
Caution
8-241
8
COPIER>FUNCTION>DPC
DRMRSETC Lv.1 Details
8-242
COPIER>FUNCTION>DPC
DRMRSETK Lv.1 Details ForcibleexeofBkDrumreplacementmode WhenreplacementofDrumUnitiscompletedwithin30minutes, warm-uprotationmaynotbeexecutedatpower-off/onbecause of high fixing temperature. In such cases, drum potential becomesunstable,causinganimagefailuretooccur.Toprevent thissymptom,thisitemforciblyexecutesthesameoperationas warm-uprotation.Atthistime,laserpowervalues,etc.,thatwere correctedaccordingtoBkdrumcounter,totalchargingtime, targetVdvaluesforpotentialcontrolanddrumdurabilityare reset. WhendetectionoftheDrumUnitreplacementhasfailed WhentheDrumUnitusedinothermachineforawhileisused asadummyunit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthedrumreplacementmodeisenabled,itbecomes disabledautomaticallyafterexecution. UseaDrumUnitthatisnotclosetotheendoflifeasadummy unit.WhenusingaDrumUnitthatisclosetotheendoflife,it affectsthelifeofdeveloper,etc. 0to1 0:Disabled(Notexecuted),1:Enabled(Executed) 0 Approx.2minutes COPIER>FUNCTION>DPC>DRM-RSET,DRMRSETY, DRMRSETM,DRMRSETC T-8-37
Usecase
Adj/set/operatemethod
Caution
ForcibleexeofCDrumreplacementmode WhenreplacementofDrumUnitiscompletedwithin30minutes, warm-uprotationmaynotbeexecutedatpower-off/onbecause of high fixing temperature. In such cases, drum potential becomesunstable,causinganimagefailuretooccur.Toprevent thissymptom,thisitemforciblyexecutesthesameoperation aswarm-uprotation.Atthistime,laserpowervalues,etc.,that werecorrectedaccordingtoCdrumcounter,totalchargingtime, targetVdvaluesforpotentialcontrolanddrumdurabilityare reset. WhendetectionoftheDrumUnitreplacementhasfailed WhentheDrumUnitusedinothermachineforawhileisused asadummyunit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthedrumreplacementmodeisenabled,itbecomes disabledautomaticallyafterexecution. UseaDrumUnitthatisnotclosetotheendoflifeasadummy unit.WhenusingaDrumUnitthatisclosetotheendoflife,it affectsthelifeofdeveloper,etc. 0to1 0:Disabled(Notexecuted),1:Enabled(Executed) 0 Approx.2minutes COPIER>FUNCTION>DPC>DRM-RSET,DRMRSETY, DRMRSETM,DRMRSETK -
Usecase
Adj/set/operatemethod
Caution
8-242
8
CST
COPIER>FUNCTION>CST
MF-A4R Lv.1 Details
8-243
COPIER>FUNCTION>CST
MF-A4 Lv.1 Details RegMulti-purposeTrayA4standardwidth ToregisterthestandardvalueofA4paperwidth(297mm)on theMulti-purposeTray. Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MF-A4. 1)SetA4paperontheMulti-purposeTray,andsettheguideso that it fits the paper width. 2)Selecttheitem,andthenpressOKkey. Thevalueisregisteredafterautomaticadjustment. 0to255 0 COPIER>ADJUST>CST-ADJ>MF-A4 T-8-38
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MF-A6R Lv.1 Details
Usecase Adj/set/operatemethod
RegMulti-purposeTrayA4Rstdrdwidth ToregisterthestandardvalueofA4Rpaperwidth(210mm)on theMulti-purposeTray. Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MFA4R. 1)SetA4RpaperontheMulti-purposeTray,andsettheguideso that it fits the paper width. 2)Selecttheitem,andthenpressOKkey. Thevalueisregisteredafterautomaticadjustment. 0to255 0 COPIER>ADJUST>CST-ADJ>MF-A4R RegMulti-purposeTrayA6Rstdrdwidth ToregisterthestandardvalueofA6Rpaperwidth(105mm)on theMulti-purposeTray. Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MFA6R. 1)SetA6RpaperontheMulti-purposeTray,andsettheguideso that it fits the paper width. 2)Selecttheitem,andthenpressOKkey. Thevalueisregisteredafterautomaticadjustment. 0to255 0 COPIER>ADJUST>CST-ADJ>MF-A6R -
Usecase Adj/set/operatemethod
8-243
8
CLEANING
COPIER>FUNCTION>CLEANING
DEVL-CLN Lv.1 Details
8-244
COPIER>FUNCTION>CLEANING
2TR-CLN Lv.1 Details CleanofSecondaryTransferOuterRoller TocleanpaperdustadheredontheSecondaryTransferOuter Roller. BoththePrimaryTransferRollerandtheSecondaryTransfer OuterRollerareengagedtotheITB. TheProcessUnitdoesoperationthatisthesameatimage formation.Itforms4tonerbandswhichthe4colorsarelaidon topofanotherontheITB. Thebasevoltage(Vb)calculatedwiththeSecondaryTransfer ATVCcontrolisappliedtotheSecondaryTransferOuterRoller untilthetonerbandspassthrough,sothattonerisadheredon theSecondaryTransferOuterRoller. Afterthetonerbandspassed,SecondaryTransferOuterRoller cleaningcontrolisexecuted(positive/reversebiasisapplied every2rotationsoftheroller).TonerisadheredontheITB. WhenthetoneradheredontheITBpassedthroughtheITB CleaningUnit,theoperationisstopped.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
WhenthebacksideofthesheetissoiledbytheSecondary TransferOuterRoller WhencontactingwiththeSecondaryTransferOuterRollerat thetimeofjamprocessing,etc. Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When the operation finished normally:OK! 0 -
8-244
8
COPIER>FUNCTION>CLEANING
TNR-COAT Lv.1 Details
8-245 FIXING
COPIER>FUNCTION>FIXING
NIP-CHK Lv.1 Details Usecase Check of fixing nip width To check whether the fixing nip width is appropriate by printing. If it is not appropriate, a fixing failure may occur. When replacing the fixing-related parts (Fixing Film, Pressure Roller) When a fixing failure occurs 1)SetA4/LTRplainpaper(75to90g/m2)onthemainunitdeck. 2)Selectthecassette,andthenpressOKkey. Printingisstarted,andasheetisautomaticallystoppedatthe fixing nip (10 seconds) and then is automatically delivered. 3)Measurethenipwidth. - During operation: ACTIVE, When the operation finished normally:OK! - Center:15.5+/-1mm,Edge:17.5+/-1mm - - - - -
T-8-40
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ExetonercoatingmodetoSecTrnsRoll WhenusinganewSecondaryTransferOuterRoller,materialon thesurfaceoftherollerscrapesagainsttheITBandadhereson it,causinganwhitespotimage. Withthetonercoatingmode,theITBiscleanedbycoatingthe SecondaryTransferOuterRollerwithtoner,andremovingthe materialadheredontheITBwiththetoner. WhenreplacingtheSecondaryTransferOuterRoller Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When the operation finished normally:OK! T-8-39
Adj/set/operatemethod
8-245
8
PANEL
COPIER>FUNCTION>PANEL
LCD-CHK Lv.1 Details Usecase Adj/set/operatemethod
8-246
COPIER>FUNCTION>PANEL
LED-OFF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo KEY-CHK Lv.1 Details Usecase Adj/set/operatemethod EndcheckofControlPanelLED ToterminatecheckingoftheLEDontheControlPanel. DuringexecutionofLED-CHK Selecttheitem,andthenpressOKkey. COPIER>FUNCTION>PANEL>LED-CHK Checkofkeyentry TocheckthekeyinputontheControlPanel. WhenreplacingtheLCDPanel 1)SelecttheitemandpressthekeyontheControlPanel. 2)Checkthattheinputvalueisdisplayed. 3)Releasetheselectiontoterminatechecking. AdjofcoordinatepstnofTouchPanel ToadjustthecoordinatepositionontheTouchPanelofthe ControlPanel. WhenreplacingtheLCDPanel 1)Selecttheitem,andthenpressOKkey. 2)Pressthe9"+"insequence. T-8-41
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LED-CHK Lv.1 Details Usecase Adj/set/operatemethod
CheckofLCDPaneldotmissing TocheckwhetherthereisamissingdotontheLCDPanelofthe ControlPanel. WhenreplacingtheLCDPanel 1)Selecttheitem,andthenpressOKkey. 2)CheckthattheLCDPanellightsupintheorderofwhite, black,red,greenandblue. 3)PressSTOPkeytoterminatechecking. CheckofControlPanelLED TocheckwhethertheLEDontheControlPanellightsup. WhenreplacingtheLCDPanel 1)Selecttheitem,andthenpressOKkey. 2)CheckthattheLEDlightsupintheorder. 3)TerminatecheckingwithLED-OFF. COPIER>FUNCTION>PANEL>LED-OFF -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TOUCHCHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-246
8
PART-CHK
COPIER>FUNCTION>PART-CHK
CL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-247
COPIER>FUNCTION>PART-CHK
FAN Lv.1 Specification of operation Fan TospecifytheFantooperate. WhenreplacingtheFan/checkingtheoperation Enterthevalue,andthenpressOKkey. 1to10 1:FixingHeatExhaustFan1(FM1) 2:FixingHeatExhaustFan2(FM2) 3:Notused 4:ProcessCartridgeFan(Rear)(FM4) 5:FixingCoolingFan(Front)(FM5) 6:FixingCoolingFan(Rear)(FM6) 7:DeliveryFan1(FM7) 8:SecondaryTransferExhaustFan(FM8) 9:DeliveryFan2(FM9) 10:ProcessCartridgeFan(Front)(FM10) 1 COPIER>FUNCTION>PART-CHK>FAN-ON OperationcheckofFan To start operation check of the Fan specified by FAN. WhenreplacingtheFan/checkingtheoperation Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! 1minute COPIER>FUNCTION>PART-CHK>FAN -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CL-ON Lv.1 Details
Usecase Adj/set/operatemethod
Specification of operation Clutch Tospecifytheclutchtooperate. WhenreplacingtheClutch/checkingtheoperation Enterthevalue,andthenpressOKkey. 1to5 1:Multi-purposePickupClutch(CL1) 2:TonerSupplyClutch(Y)(CL2) 3:TonerSupplyClutch(M)(CL3) 4:TonerSupplyClutch(C)(CL4) 5:TonerSupplyClutch(Bk)(CL5) 0 COPIER>FUNCTION>PART-CHK>CL-ON OperationcheckofClutch To start operation of the clutch specified with CL. Duringoperation,ON/OFFisrepeatedwithanintervalof3 seconds. WhenreplacingtheClutch/checkingtheoperation 1)DrivetheITBandDrum(COPIER>FUNCTION>MISC-P> MAIN-DRV). 2)Selecttheitem,andthenpressOKkey. 3)CheckthegearoftheTransferCleaningAssembly. During operation: ACTIVE, When operation finished normally: OK! 0 Approx.1minute COPIER>FUNCTION>MISC-P>MAIN-DRV COPIER>FUNCTION>PART-CHK>CL RemovetheInnerCoversothattheClutchcanbechecked visually.
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FAN-ON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-247
8
COPIER>FUNCTION>PART-CHK
MTR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-248
COPIER>FUNCTION>PART-CHK
MTR-ON Lv.1 Details Usecase Adj/set/operatemethod Caution OperationcheckofMotor To start operation check of the Motor specified by MTR. Theoperationautomaticallystopsafteroperationof5seconds. WhenreplacingtheMotor/checkingtheoperation Selecttheitem,andthenpressOKkey. WhiletheTonerContainerDriveMotorisactive,besureto removetheTonerContainer.Otherwise,tonerleakagemay occurinthemachine. During operation: ACTIVE, When operation finished normally: OK! 1minute COPIER>FUNCTION>PART-CHK>MTR Specification of operation Solenoid TospecifytheSolenoidtooperate. WhenreplacingtheSolenoid/checkingtheoperation Enterthevalue,andthenpressOKkey. 1to7 1:RegistrationShutterSolenoid(SL1) 2:Cassette1PickupSolenoid(SL2) 3:Cassette2PickupSolenoid(SL3) 4:Multi-purposeTrayLiftingSolenoid(SL4) 5:FirstDeliveryFlapperSolenoid(SL5) 6:SecondDeliveryFlapperSolenoid(SL6) 7:ThirdDeliveryFlapperSolenoid(SL7) 1 COPIER>FUNCTION>PART-CHK>SL-ON -
Specification of operation Motor TospecifytheMotortooperate. WhenreplacingtheMotor/checkingtheoperation Enterthevalue,andthenpressOKkey. DonotoperateM1toM8andM13(*asterisk)unlesstheyare necessary. 1to30 1:DrumMotor(Y,M,C)(M1toM3)* 2:DrumMotor(Y,M,C)(M1toM3)* 3:DrumMotor(Y,M,C)(M1toM3)* 4:DrumMotor(Bk)(M4),ITBMotor(M13)* 5:DevelopingMotor(Y)(M5)* 6:DevelopingMotor(M)(M6)* 7:DevelopingMotor(C)(M7)* 8:DevelopingMotor(Bk)(M8)* 9:TonerContainerMotor(Y)(M9) 10:TonerContainerMotor(M)(M10) 11:TonerContainerMotor(C)(M11) 12:TonerContainerMotor(Bk)(M12) 13:DrumMotor(Bk)(M4),ITBMotor(M13)* 14:ITBDisplacementControlMotor(M14) 15:PrimaryTransferSeparationMotor(M15) 16:Cassette1PickupMotor(M16) 17:Cassette2PickupMotor(M17) 18:Multi-purposeMotor(M18) 19:RegistrationMotor(M19) 20:Multi-purposeFeedMotor(M20) 21:FixingMotor(M21) 22:FixingDeliveryMotor(M22) 23:First&SecondDeliveryMotor(M23) 24:ReverseRollerMotor(M24) 25:ThirdDeliveryMotor(M25) 26:WasteTonerStirringMotor(M26) 27:ShutterMotor(M27) 28:LaserShutterMotor(M28) 29:ScannerMotor(YM)(M29) 30:ScannerMotor(CBk)(M30) 1 COPIER>FUNCTION>PART-CHK>MTR-ON -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-248
8
COPIER>FUNCTION>PART-CHK
SL-ON Lv.1 Details
8-249 CLEAR
COPIER>FUNCTION>CLEAR
ERR Lv.1 Details Usecase Adj/set/operatemethod Clearoferrorcode Toclearerrorcodes(E000,E001,E002,E003,E717,E719). Aterroroccurrence 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. RAMclearofDCControllerPCB TocleartheRAMdataoftheDCControllerPCB. WhenclearingtheRAMdataoftheDCControllerPCB 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Beforeexecutionofthisitem,besuretooutputtheservice modesettingvaluesbyP-PRINT.Afterexecution,enter necessarysettingvalues. TheRAMdataisclearedafterthemainpowerswitchisturned OFF/ON. COPIER>FUNCTION>MISC-P>P-PRINT -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
OperationcheckofSolenoid To start operation check for the Solenoid specified by SL. Theoperationstopsafter"ONfor0.5sec"=>"OFFfor10sec" =>"ONfor0.5sec"=>"OFFfor10sec"=>"ONfor0.5sec". WhenreplacingtheSolenoid/checkingtheoperation Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! 1minute COPIER>FUNCTION>PART-CHK>SL T-8-42
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DC-CON Lv.1 Details Usecase Adj/set/operatemethod Caution
8-249
8
COPIER>FUNCTION>CLEAR
R-CON Lv.1 Details Usecase Adj/set/operatemethod Caution
8-250
COPIER>FUNCTION>CLEAR
PWD-CLR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADRS-BK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CNT-MCON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Clearofsystemadministratorpassword Toclearthepasswordofthesystemadministratorsetintheuser mode. Whenclearingthepasswordofthesystemadministrator Selecttheitem,andthenpressOKkey. Clearofaddressbook Tocleartheaddressbookdata. Whenclearingtheaddressbookdata 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Theaddressbookdataisclearedafterthemainpowerswitchis turnedOFF/ON. ClearofMainControllerservicecounter TocleartheservicecountercountedbytheMainControllerPCB. WhenclearingtheservicecountercountedbytheMain ControllerPCB Selecttheitem,andthenpressOKkey. COPIER>COUNTER SeeCOUNTERforthetargetcounter.
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo JAM-HIST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ERR-HIST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
RAMclearofReaderControllerPCB TocleartheRAMdataoftheReaderControllerPCB. WhenclearingtheRAMdataoftheReaderControllerPCB 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Beforeexecutionofthisitem,besuretooutputtheservice modesettingvaluesbyP-PRINT.Afterexecution,enter necessarysettingvalues. TheRAMdataisclearedafterthemainpowerswitchisturned OFF/ON. COPIER>FUNCTION>MISC-P>P-PRINT Clearofjamhistory Toclearthejamhistory. Whenclearingthejamhistory Selecttheitem,andthenpressOKkey. Clearoferrorcodehistory Tocleartheerrorcodehistory. Whenclearingtheerrorcodehistory Selecttheitem,andthenpressOKkey. -
8-250
8
COPIER>FUNCTION>CLEAR
CNT-DCON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OPTION Lv.1 Details Usecase Adj/set/operatemethod Caution
8-251
COPIER>FUNCTION>CLEAR
MMI Lv.1 Details Clearofusermodesettingvalue Tocleartheusermodesettingvalues(excludingvaluesfor ControlPanel,commonsettings,andFAX). CommonSettings TimerSettings Adjustment/Cleaning ReportSettings SystemSettings CopySettings CommunicationsSettings PrinterSettings Whenclearingvarioussettingvaluesofusermode 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thesettingvalueisclearedafterthemainpowerswitchisturned OFF/ON. -
ClearofDCControllerservicecounter Tocleartheservicecounter(FIN-STPR,FIN-PDDL,SADDLE, STPL)countedbytheDCControllerPCB. WhenclearingtheservicecountercountedbytheDCController PCB Selecttheitem,andthenpressOKkey. COPIER>COUNTER>DRBL-2>FIN-STPR,FIN-PDDL, SADDLE,STPL ClearofservicemodesettingVL(OPTION) To return the value specified in service mode (OPTION) to the defaultvalue(valueatthetimeofRAMclear). Selecttheitem,andthenpressOKkey. Beforeexecutionofthisitem,besuretooutputtheservice modesettingvaluesbyP-PRINT.Afterexecution,enter necessarysettingvalues. ThisitemisexecutedforthedataontheMainControllerPCB, DCControllerPCBandReaderControllerPCB. COPIER>FUNCTION>MISC-P>P-PRINT -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-251
8
COPIER>FUNCTION>CLEAR
MN-CON Lv.1 Details Usecase Adj/set/operatemethod
8-252
COPIER>FUNCTION>CLEAR
CA-KEY Lv.2 Details Usecase Adj/set/operatemethod Deletion of CA certificate and key pair To simultaneously delete the CA certificate and key pair which areadditionallyregisteredbytheuser. Whenaservicepersonreplaces/discardsthedevice 1)Selecttheitem,andthenpressOKkey. 2)CheckthatOKisdisplayed. 3)TurnOFF/ONthemainpowerswitch. Unlessthisitemisexecutedatthetimeofreplacement/ discard of the device, the CA certificate and key pair which are additionallyregisteredbytheuserremainintheHDD,whichis aproblemintermsofsecurity. Do not execute this item carelessly because the CA certificate andkeypairwhichareadditionallyregisteredaredeleted whenitisexecuted.Iftheyaredeletedmistakenly,theyneed to be again registered by the user. If no CA certificate and keypairareadditionallyregistered,themachinecondition becomesthesameastheoneatthetimeoffactoryshipment. WhenNGisdisplayedin2),thereisapossibilitythatdeletion wasnotexecuted.Inthiscase,surelyexecutethedeletionby initializingtheHDD,etc. Atnormaltermination:OK,Atabnormaltermination:NG The CA certificate is used in the MEAP application with E-RDS andSSLclientconnection,andthekeypairisusedintheSSL functionofIPP,RUIandMEAP. WhenthemainpowerswitchisturnedOFF/ON,theCA certificate and key pair which were registered at the time offactoryshipmentaredecompressedfromthearchive (/BOOTDEV/KCMNG),andbecomeavailableintheE-RDS/ SSLfunction.
Caution
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CARD Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
RAMclearofMNCONPCBSRAMBoard TocleartheRAMdataoftheMainControllerPCBSRAMBoard. AlldataontheSRAMBoardisinitialized. WhenclearingtheRAMdataoftheMainControllerPCBSRAM Board 1)Selecttheitem,andthenpressOKkey. Themachineisautomaticallyrebooted. 2)TurnOFF/ONthemainpowerswitch. InformtheuserthatallimagesinInboxwillbedeletedandget approvalforit. Since the file management information is initialized, images on theHDDcannotberead. Beforeexecutionofthisitem,besuretooutputtheservice modesettingvaluesbyP-PRINT.Afterexecution,enter necessarysettingvalues. TheRAMdataisclearedafterthemainpowerswitchisturned OFF/ON. COPIER>FUNCTION>MISC-P>P-PRINT ClearofcardID-relateddata ToclearthedatarelatedtothecardID(department). WhenclearingthedatarelatedtothecardID 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ThevalueisclearedafterthemainpowerswitchisturnedOFF/ ON. -
Caution
8-252
8
COPIER>FUNCTION>CLEAR
ERDS-DAT Lv.1 Details
8-253
COPIER>FUNCTION>CLEAR
REG-CLR Lv.2 Details Clearofimagepositioncorrectionvalue Toclearthevaluewhenthecorrectionvaluethatisadjustedby imagepositioncorrectioncontrolbecomesafaultyvaluedueto somereasons. Whencolordisplacementcannotbecorrectedbyimageposition correctioncontrol,clearthecorrectionvalueandturnOFF/ON themachineorexecute"QuickAdjust"inusermodesothat imagepositioncorrectionisexecutedagain. Whenacorrectionfailureoccursinanobliquedirection,use "COPIER>FUNCTION>LASER>LD-ADJ-Y,LD-ADJ-M,LDADJ-C"atthesametime. Whencolordisplacementcannotbecorrectedbyimage positioncorrectioncontrol Whenafailureoccursincorrectioninanobliquedirection Selecttheitem,andthenpressOKkey. COPIER>FUNCTION>LASER>LD-ADJ-Y,LD-ADJ-M,LDADJ-C Adjustment/Maintenance>AdjustImageQuality>AutoAdjust Gradation>QuickAdjust InitializeUSBMEAPpriorityrgstinfo To initialize the registered ID data retained in the OS field by callingtheAPIprovidedbytheOS. WhenafailureoccursinUSBMEAPpriorityregistration Selecttheitem,andthenpressOKkey. -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo KEY-CLR Lv.2 Details
Usecase Adj/set/operatemethod
Caution
InitializationofE-RDSSRAMdata ToinitializetheSCMvalueoftheEmbedded-RDSstoredinthe SRAM. SCMvaluesareON/OFFofE-RDS,server'sportnumber, server'sSOAPURL,andcommunicationschedulewiththe server(howoftenthedataisacquired),etc. ThevaluesetbyCOPIER>FUNCTION>INSTALL>E-RDS, RGW-PORT,RGW-ADR,COM-LOGiscleared. WhenupgradingtheBootableintheE-RDSenvironment Selecttheitem,andthenpressOKkey. ThemethodofusingtheSRAMinE-RDSdiffersdepending ontheBootableversion.Therefore,unlesstheSRAMdata isclearedatthetimeofversionupgrade,datainconsistency occurs. Atnormaltermination:OK,Atabnormaltermination:NG COPIER>FUNCTION>INSTALL>E-RDS,RGW-PORT,RGWADR,COM-LOG EncryptkeyclearofHDDEncryptBoard TocleartheencryptionkeyoftheHDDEncryptionBoard (SecurityKit)forreplacement. Processingisexecutedatthetimeofreplacementofthe encryptionboard,andanewencryptionkeyisgenerated. WhenreplacingtheencryptionkeyfortheHDDEncryption Board 1)Selecttheitem,andthenpressOKkey. 2)CheckthatOKisdisplayed. 3)TurnOFF/ONthemainpowerswitch. SincealldataintheHDDbecomesunavailablewhenexecuting thisitem,besuretoinitializetheHDDafterturningOFF/ONthe mainpowerswitch. Atnormaltermination:OK,Atabnormaltermination:NG -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo USBM-CLR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-253
8
COPIER>FUNCTION>CLEAR
JV-CACHE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-254 MISC-R
COPIER>FUNCTION>MISC-R
SCANLAMP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1PSCLB-A Lv.1 Details Light-upcheckofLED TolightuptheLEDfor3seconds. WhenreplacingtheLED Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! 3seconds DADF2facescolordiffercrrct(front) Toacquirescanningdataonthefrontsideinordertocorrectthe colordifferencebetweenthefrontandbacksideatthetimeof duplexstreamreading. A significant color difference may occur between the front and backsideoftheimagescannedonDADFcausedbyvariations inthelightsourceofthelampandchangesindurability.Sucha colordifferenceiscorrectedbyexecuting1PSCLB-Bfollowing 1PSCLB-A. When a significant color difference occurs between the front and backsidecausedbyvariationsinthelightsourceofthelamp andchangesindurability 1)SetpaperonDADF. 2)Selecttheitem,andthenpressOKkey. BesurenottoturnOFF/ONthepowerafterOKisdisplayedby 1PSCLB-A. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>1PSCLB-B,1PCLBRST -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-254
8
COPIER>FUNCTION>MISC-R
1PSCLB-B Lv.1 Details
8-255
COPIER>FUNCTION>MISC-R
1PCLBSET Lv.1 Details DADF2facescolordiffercrrctrefside Tosetwhichsideofthefrontorbacksideshouldbethe referencesidewhencorrectingacolordifferenceatthetimeof duplexstreamreading. The correction result is reflected after executing the following operation:specifythereferenceside,executeaseriesofcolor differencecorrectionprocessing,andthenturnOFF/ONthe power. BeforestartingcorrectionofcolordifferenceinDADFduplex printing Enterthesettingvalue,andthenpressOKkey. 0to2 0:N/A,1:Frontside,2:Backside 0 DADF2facesclrdiffercrrctlowrlimit Colorswhichdonotneedtobecorrectedaresometimes correctedasaresultofcorrectionofcolordifferenceinduplex streamreading. Tokeepcolorswhichdonotneedtobecorrected,thecorrection amountisadjustedsothattheeffectofcorrectionisweakened. The result is reflected when correction of color difference is executedagainafterthesettingismade. When "1: ON" is specified, unnecessary correction is not executed,butanexpectedeffectmaynotbeobtainedforother colors. Ifthecolordifferenceoccursonthecolorswhichdidn'thaveany differencebeforecorrection,adjustthecorrectionamountbefore executingthecolordifferencecorrectionagain. Enterthesettingvalue,andthenpressOKkey. Expectedcorrectionresultmaynotbeobtained. 0to1 0:OFF,1:ON 0 -
Usecase
Adj/set/operatemethod
DADF2facescolordiffercrrct(back) Toacquirescanningdataonthebacksideinordertocorrectthe colordifferencebetweenthefrontandbacksideatthetimeof duplexstreamreading. A significant color difference may occur between the front and backsideoftheimagescannedonDADFcausedbyvariations inthelightsourceofthelampandchangesindurability.Sucha colordifferenceiscorrectedbyexecuting1PSCLB-Bfollowing 1PSCLB-A. When a significant color difference occurs between the front and backsidecausedbyvariationsinthelightsourceofthelamp andchangesindurability 1)Setthedocumentusedby1PSCLB-AonDADF,sothatthe frontsideisfaceddownandthecyanimageisplacedatthe rightrearside. 2)Selecttheitem,andthenpressOKkey. BesurenottoturnOFF/ONthepowerafterOKisdisplayedby 1PSCLB-A. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>1PSCLB-A,1PCLBRST -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1PCLBUDR Lv.1 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-255
8
COPIER>FUNCTION>MISC-R
1PCLBOVR Lv.1 Details
8-256
COPIER>FUNCTION>MISC-R
BWM-PLTN Lv.1 Details SamplingofB&WcopyboardreadMTFvalue TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. WhenB&Wcopyboardreadingisperformed,thecontroller performssamplingoftheMTFvalue.Thisvalueissetin COPIER>ADJUST>CCD>MTF2-Mx,MTF2-Sx. Atinstallation 1)SettheMTFchartonthecopyboardglass. 2)Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CLM-PLTN Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
DADF2facesclrdiffercrrctuprlimit Excessivecorrectionissometimesmadewhencorrectingcolor differenceinduplexstreamreading. Tocontrolexcessivecorrection,adjustthecorrectionamountto weakentheeffectofcorrection. The result is reflected when correction of color difference is executedagainafterthesettingismade. When "1: Weak control" or "2: Strong control" is specified, excessivecorrectionisnotmade,butanexpectedeffectmay notbeobtainedforothercolors. Ifthecolordifferenceoccursonthecolorswhichdidn'thaveany differencebeforecorrection,adjustthecorrectionamountbefore executingthecolordifferencecorrectionagain. Enterthesettingvalue,andthenpressOKkey. Expectedcorrectionresultmaynotbeobtained. 0to2 0:Nocontrol,1:Weakcontrol,2:Strongcontrol SamplingofcolorcopyboardreadMTFVL TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. Whencolorcopyboardreadingisperformed,thecontroller performssamplingoftheMTFvalue.Thisvalueissetin COPIER>ADJUST>CCD>MTF2-Mx,MTF2-Sx. Atinstallation 1)SettheMTFchartonthecopyboardglass. 2)Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-256
8
COPIER>FUNCTION>MISC-R
CLM-DF1 Lv.1 Details
8-257
COPIER>FUNCTION>MISC-R
BWM-DF1 Lv.1 Details SamplingofB&WfrontstreamreadMTFVL TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. WhenB&Wfrontsidestreamreadingisperformed,thecontroller performssamplingoftheMTFvalue.Thisvalueissetin COPIER>ADJUST>CCD>MTF2-Mx,MTF2-Sx. Atinstallation 1)SettheMTFchartontheADF. 2)Selecttheitem,andthenpressOKkey. 3)PerformB&WbacksidestreamreadingwiththeMTFchart setontheADF.(BWM-DF2) During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>BWM-DF2 COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase Adj/set/operatemethod
SamplingofclrfrontstreamreadMTFVL TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. Whencolorfrontsidestreamreadingisperformed,thecontroller performssamplingoftheMTFvalue.Thisvalueissetin COPIER>ADJUST>CCD>MTF2-Mx,MTF2-Sx. Atinstallation 1)SettheMTFchartontheADF. 2)Selecttheitem,andthenpressOKkey. 3)PerformcolorbacksidestreamreadingwiththeMTFchartset ontheADF.(CLM-DF2) During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>CLM-DF2 COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase Adj/set/operatemethod
8-257
8
COPIER>FUNCTION>MISC-R
CLM-DF2 Lv.1 Details
8-258
COPIER>FUNCTION>MISC-R
BWM-DF2 Lv.1 Details SamplingB&WbackstreamreadMTFvalue TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. WhenB&Wbacksidestreamreadingisperformed,thecontroller performssamplingoftheMTFvalue.TheMTFvalueissetin MTF-Mx,MTF-Sx. Atinstallation 1)PerformB&WfrontsidestreamreadingwiththeMTFchart setontheADF.(BWM-DF1) 3)SettheMTFchartontheADF. 4)Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>BWM-DF1 COPIER>ADJUST>CCD>MTF-M1to12,MTF-S1to12 -
Usecase Adj/set/operatemethod
SamplingcolorbackstreamreadMTFVL TheMTFvaluefortheReaderUnitissometimesdisplaced fromthefactorysettingvaluedependingonthecondition attransportation/storage.Ifthemachineisinstalledwithout correctingthevalue,itmaycauseanimagefailuresuchas moire.Therefore,itisnecessarytoreadjusttheMTFvalueby readingtheMTFadjustmentchartatinstallation. Whencolorbacksidestreamreadingisperformed,thecontroller performssamplingoftheMTFvalue.TheMTFvalueissetin MTF-Mx,MTF-Sx. Atinstallation 1)PerformcolorfrontsidestreamreadingwiththeMTFchartset ontheADF.(CLM-DF1) 2)SettheMTFchartontheADF. 3)Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>MISC-R>CLM-DF1 COPIER>ADJUST>CCD>MTF-M1to12,MTF-S1to12 -
Usecase Adj/set/operatemethod
8-258
8
COPIER>FUNCTION>MISC-R
CLPLT-EN Lv.1 Details
8-259
COPIER>FUNCTION>MISC-R
BWPLT-EN Lv.1 Details B&WcopyboardreadMTFvalueinitialset ToreturntheMTFvalueforB&Wcopyboardreadingtothe factorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenBWM-PLTNisexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithBWM-PLTN becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthefrontsideofaB&Wimageevenperforminga fine adjustment with BWM-TGT after adjusting the MTF value withBWM-PLTN. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>BWM-PLTN,BWM-TGT COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ColorcopyboardreadMTFVLinitialset ToreturntheMTFvalueforcolorcopyboardreadingtothe factorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenCLM-PLTNisexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithCLM-PLTN becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthefrontsideofacolorimageevenperforminga fine adjustment with CLM-TGT after adjusting the MTF value withCLM-PLTN. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>CLM-PLTN,CLM-TGT COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-259
8
COPIER>FUNCTION>MISC-R
CLDF1-EN Lv.1 Details
8-260
COPIER>FUNCTION>MISC-R
BWDF1-EN Lv.1 Details B&WfrontstreamreadMTFVLinitialset ToreturntheMTFvalueforB&Wfrontsidestreamreadingto thefactorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenBWM-DF1isexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithBWM-DF1 becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthefrontsideofaB&Wimageevenperforminga fine adjustment with BWM-TGT after adjusting the MTF value withBWM-DF1. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>BWM-DF1,BWM-TGT COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ClrfrontstreamreadMTFVLinitialset ToreturntheMTFvalueforcolorfrontsidestreamreadingtothe factorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenCLM-DF1isexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithCLM-DF1 becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthefrontsideofacolorimageevenperforminga fine adjustment with CLM-TGT after adjusting the MTF value withCLM-DF1. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>CLM-DF1,CLM-TGT COPIER>ADJUST>CCD>MTF2-M1to12,MTF2-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-260
8
COPIER>FUNCTION>MISC-R
CLDF2-EN Lv.1 Details
8-261
COPIER>FUNCTION>MISC-R
BWDF2-EN Lv.1 Details B&WbackstreamreadMTFVLinitialset ToreturntheMTFvalueforB&Wbacksidestreamreadingto thefactorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenBWM-DF2isexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithBWM-DF2 becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthebacksideofaB&Wimageevenperforminga fine adjustment with BWM-TGT after adjusting the MTF value withBWM-DF2. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>BWM-DF2,BWM-TGT COPIER>ADJUST>CCD>MTF-M1to12,MTF-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ClrbackstreamreadMTFVLinitialset ToreturntheMTFvalueforcolorbacksidestreamreadingto thefactorysettingvalue. Sinceoverwritingisperformedwiththebackupdataretainedin theReaderControllerPCB,theMTFvalueobtainedbysampling oftheMTFchartbecomesdisabled. WhenCLM-DF2isexecuted,thevalueisautomaticallysetto1. Whenthevalueissetto0,thevalueadjustedwithCLM-DF2 becomesdisabledandreturnedtothefactorysettingvalue. WhenreturningtheMTFvaluetotheinitialsettingvalueupon user's request in case that a sufficient quality level cannot be obtainedonthebacksideofacolorimageevenperforminga fine adjustment with CLM-TGT after adjusting the MTF value withCLM-DF2. Selecttheitem,andthenpressOKkey. TheMTFvalueobtainedbyreadingtheMTFchartbecomes disabled. 0to1 0:Factorysettingvalue,1:Adjustmentvalueatinstallation Approx.1minute COPIER>FUNCTION>MISC-R>CLM-DF2,CLM-TGT COPIER>ADJUST>CCD>MTF-M1to12,MTF-S1to12 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-261
8
COPIER>FUNCTION>MISC-R
CLM-TGT Lv.1 Details
8-262
COPIER>FUNCTION>MISC-R
SCANLMP2 Lv.1 Details Light-upcheckofLEDLampUnit:back TolightuptheLEDLampUnitforbackside,whichisplaced intheADF,andcheckwhetherthereisamissingblockorno lightinginLED. WhenreplacingtheLEDLampUnitforbackside Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.5seconds T-8-44
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BWM-TGT Lv.1 Details
FineadjustmentofcolorMTFvalue To perform the filter processing inside of the Reader Controller sothattheMTFvaluemeasuredbyCLM-PLTN/CLM-DF1/CLMDF2becomes55%orlowerofthevalue. When 1 is specified, the MTF correction filter is calculated again, andtheMTFvaluebecomes50%orlowerofthevalue(the image becomes foggy). The backed up MTF filter correction coefficient is updated. WhendecreasingtheMTFvalue(tomaketheimagefoggy) uponuser'srequest(moire,incorrectjudgment) Enterthesettingvalue,andthenpressOKkey. 0to1 0:55% 1:50%(Theimagebecomesfoggy.) 0 Approx.2minutes TheMTFvalueissetto65%atthetimeofshipment. FineadjustmentofB&WMTFvalue To perform the filter processing inside of the Reader Controller sothattheMTFvaluemeasuredbyBWM-PLTN/BWM-DF1/ BWM-DF2becomes55%orlowerofthevalue. When 1 is specified, the MTF correction filter is calculated again, andtheMTFvaluebecomes50%orlowerofthevalue(the image becomes foggy). The backed up MTF filter correction coefficient is updated. WhendecreasingtheMTFvalue(tomaketheimagefoggy) uponuser'srequest(moire,incorrectjudgment) Enterthesettingvalue,andthenpressOKkey. 0to1 0:55% 1:50%(Theimagebecomesfoggy.) 0 Approx.2minutes TheMTFvalueissetto65%atthetimeofshipment.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-262
8
MISC-P
COPIER>FUNCTION>MISC-P
P-PRINT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AUTO-IMG Lv.1 Details
8-263
COPIER>FUNCTION>MISC-P
KEY-HIST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HIST-PRT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRS-DATA Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OutputofCtrlPanelkeyentryhistory ToprintthekeyinputhistoryontheControlPanel. WhenprintingthekeyinputhistoryontheControlPanel Selecttheitem,andthenpressOKkey. Approx.15seconds Outputofjamanderrorhistory Toprintthejamhistoryanderrorhistory. Whenprintingthejam/errorhistory Selecttheitem,andthenpressOKkey. Approx.15seconds MovingmemoryreceptiondatatoInbox TomovethedatareceivedinmemorytoInbox. WhenmovingthedatareceivedinmemorytoInbox Selecttheitem,andthenpressOKkey. -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Outputofservicemodesettingvalue Toprinttheservicemodesettingvalue. BeforeexecutingtheCLEARservicemode,etc. Selecttheitem,andthenpressOKkey. Approx.80seconds Ittakesapproximately15secondsbeforeprintingstarts. Exeofimagepstncrrctctrl(arbitrary) Toexecuteaseriesofoperationofimagepositioncorrection controlatarbitrarytiming. Imagepositioncorrectioncontrolisusuallyexecutedbythe printer engine at the specified timing according to operating conditionandenvironmentalchange.Imagepositioncorrection whenremovingtheDrumUnitorreleasingtheITBpressureis executedbyAT-IMG-X. Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.45seconds COPIER>FUNCTION>MISC-P>AT-IMG-X -
8-263
8
COPIER>FUNCTION>MISC-P
USER-PRT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LBL-PRNT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo D-PRINT Lv.1 Details
8-264
COPIER>FUNCTION>MISC-P
ENV-PRT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PJH-P-1 Lv.1 Details Inside temp/hmdy & fix roller temp log Toprintthedataoftemperatureandhumidityinthemachine/ temperatureofthesurfaceoftheFixingRolleraslogs. When grasping information of temperature in the machine/fixing temperaturefortroubleanalysis Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.15seconds Detailinfoofprintjobhistory:100job Toprinttheprintjobhistoryforthelatest100jobswithdetailed information. Inthecaseoflessthan100jobs,thehistoryofallprintjobsis printed. Whenprintingtheprintjobhistorywithdetailedinformation Selecttheitem,andthenpressOKkey. Outputtheprintjobhistorywithdetailedinformationwhichis notdisplayed/printedinthejobhistoryscreenunder"System Monitor>Print>Log>Printer"andinthereportoftheprintjob history.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Outputofusermodelist Toprinttheusermodelist. Whenprintingtheusermodelist Selecttheitem,andthenpressOKkey. Approx.15seconds Ittakesapproximately3secondsbeforeprintingstarts. Outputofservicelabel Toprinttheservicelabel. Whenprintingtheservicelabel 1)PlaceA4/LTRpaperinCassette1. 2)Selecttheitem,andthenpressOKkey. Approx.60seconds Ittakesapproximately15secondsbeforeprintingstarts. Outputofservicemode(DISPLAY) TooutputitemsdisplayedbyDISPLAYintheservicemode. ItemsoutputbyP-PRINT,LBL-PRNTandHIST-PRTandALARM areexcluded. Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.45seconds -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-264
8
COPIER>FUNCTION>MISC-P
PJH-P-2 Lv.1 Details
8-265
COPIER>FUNCTION>MISC-P
USBH-PRT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ITB-INIT Lv.1 Details OutputofUSBdeviceinformationreport TooutputinformationoftheconnectedUSBdeviceintheformof areport. InitialadjustmentofITBSteering TomakeinitialadjustmentofreferencepositionfortheITB SteeringatinitialinstallationorreplacementoftheITB-related serviceparts. Atinstallation WhenreplacingtheITB-relatedserviceparts Selecttheitem,andthenpressOKkey. Besuretocloseallcoversbeforeexecution. Inprocessing:ACTIVE,Atnormaltermination:OK,Atabnormal termination:NG Approx.1minute T-8-45
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Detailinfoofprintjobhistory:alljob Toprintthehistoryofallprintjobsstoredinthemachinewith detailedinformation(formaximum5000jobs). ThedifferencebetweenPJH-P-1andthisitemisonlythe numberofjobsprinted. Whenprintingtheprintjobhistorywithdetailedinformation Selecttheitem,andthenpressOKkey. Outputtheprintjobhistorywithdetailedinformationwhichis notdisplayed/printedinthejobhistoryscreenunder"System Monitor>Print>Log>Printer"andinthereportoftheprintjob history. Exeimgpstncrrctctrl(atpartsrplce) Toexecuteaseriesofoperationofimagepositioncorrection controlatpartsreplacement. Imagepositioncorrectioncontrolisusuallyexecutedbythe printer engine at the specified timing according to operating conditionandenvironmentalvariation.Imagepositioncorrection executedatarbitrarytimingotherthanatpartsreplacementis executedbyAUTO-IMG. WhenremovingtheDrumUnit WhenreleasingtheITBpressure Selecttheitem,andthenpressOKkey. During operation: ACTIVE, When operation finished normally: OK! Approx.95seconds COPIER>FUNCTION>MISC-P>AUTO-IMG -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-265
8
SYSTEM
COPIER>FUNCTION>SYSTEM
DOWNLOAD Lv.1 Details
8-266
COPIER>FUNCTION>SYSTEM
HD-CHECK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange EntireHDDcheckandrecovery TochecktheentireHDDandexecuterecoveryprocessing. Selecttheitem,andthenpressOKkey. BesuretoexecutethisitemafterCHK-TYPE. 0to4 0:SectorcheckoftheentireHDDandrecovery 1:Imageaccumulationarea 2: Universal file storage area 3: PDL file storage area 4: Program file storage area COPIER>FUNCTION>SYSTEM>CHK-TYPE Initialization of specified partition To initialize the HDD partition specified by CHK-TYPE. WheninitializingtheHDDpartition Selecttheitem,andthenpressOKkey. BesuretoexecutethisitemafterCHK-TYPE. Top2digits:Progressratio(%,Returnsto"00"attermination) Last 2 digits: Result at termination (00: Normally finished, Others: Abnormally finished) COPIER>FUNCTION>SYSTEM>CHK-TYPE -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHK-TYPE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Shifttodownloadmode Tomakethemachineenterthedownloadmodeandwaitfora command. PerformdownloadingbySST. Atupgrade 1)Selecttheitem,andthenpressOKkey. 2)PerformdownloadingbySST. DonotturnOFFthepowerbeforeHOLDisdisplayed. Whenwaitingforacommand:STAND-BY/STNDBY,In communication:CONNECTED,Communicationterminated: HOLD SST:ServiceSupportTool OffsetadjustmentofPotentialSensor TospecifythepartitionnumberoftheHDDtoexecuteHDCLEAR/HD-CHECK. WhenexecutingHD-CLEAR/HD-CHECK Enterthevalue,andthenpressOKkey. 0to65535 0:EntireHDD 1:Imageaccumulationarea 2: Universal file storage area 3: PDL file storage area 4: Program file storage area 5:MEAPapplication 6:Addressbooktransfersetting 7:MEAPstoragedata 8:Systemlogstoragearea COPIER>FUNCTION>SYSTEM>HD-CLEAR,HD-CHECK Universal file: Management information of user setting data, variouslogdata,PDLspooldata,andimagedata,etc.
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HD-CLEAR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-266
8
COPIER>FUNCTION>SYSTEM
DEBUG-1 Lv.2 Details
8-267
COPIER>FUNCTION>SYSTEM
Lv.2 Details Usecase Adj/set/operatemethod Caution TobackupthesettingdatainSRAMoftheDCControllerPCB. WhenreplacingtheDCControllerPCBfortroubleshootingatthe timeoftroubleoccurrence Selecttheitem,andthenpressOKkey. Duringoperation,thesettingdatachangesbymanualor automaticadjustment.Whenbackupdatawhichhasbeenleft foralongperiodoftimeisrestored,itisoverwrittenbytheold settingdataandthenewdataisdeleted. COPIER>FUNCTION>SYSTEM>DSRAMRES -
Display/adj/setrange
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DSRAMBUP
Settingoflogtypeandsavetiming Tosetthetypesoflogstobestoredandthetimingtostorelogs intheHDD. Logsareusedtoanalyzethecauseofatrouble. Whenanalyzingthecauseofatrouble Selecttheitem,andthenpressOKkey. Donotusethisatthenormalservice. Changethesettingvalueinaccordancewiththeinstructions fromtheQualitySupportDivision. 0to3 0:SavePLOGatdetectionofReboot/Exception 1:SavePLOGatdetectionofReboot/Exception/Encode 2:SaveSUBLOGatdetectionofReboot/Exception/Encode 3:SaveSUBLOGinoverwritemodeatdetectionofReboot/ Exception/Encode 0 COPIER>FUNCTION>SYSTEM>DEBUG-2(Level2) PLOGcanbeprintedbyCOPIER>FUNCTION>SYSTEM> DEBUG-2. SUBLOGcannotbeprinted.(ItshouldbeuploadedfromSST.) OutputoflogsavedonHDD ToprintthePLOGsavedinHDDbyCOPIER>FUNCTION> SYSTEM>DEBUG-1.(A4:Approx.20sheets) SUBLOGisnotprinted.ItshouldbeuploadedfromSST. WhenprintingPLOG Selecttheitem,andthenpressOKkey. Donotusethisatthenormalservice. During operation: ACTIVE, When operation finished normally: OK! COPIER>FUNCTION>SYSTEM>DEBUG-1(Level2) BackupofDCControllerPCBSRAM
8-267
8
COPIER>FUNCTION>SYSTEM
DSRAMRES Lv.2 Details Usecase Adj/set/operatemethod Caution
8-268
COPIER>FUNCTION>SYSTEM
RSRAMRES Lv.2 Details Usecase Adj/set/operatemethod Caution RestoreofReaderControllerPCBSRAM TorestorethesettingdatawhichhasbeenbackedupinSRAM oftheReaderControllerPCB. WhenreplacingtheReaderControllerPCBfortroubleshooting atthetimeoftroubleoccurrence Selecttheitem,andthenpressOKkey. Duringoperation,thesettingdatachangesbymanualor automaticadjustment.Whenbackupdatawhichhasbeenleftfor alongperiodoftimeisrestored,itisoverwrittenwithnewsetting dataandtheolddataisdeleted. COPIER>FUNCTION>SYSTEM>RSRAMBUP T-8-46
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RSRAMBUP Lv.2 Details Usecase Adj/set/operatemethod Caution
RestoreofDCControllerPCBSRAM TorestorethesettingdatawhichhasbeenbackedupinSRAM oftheDCControllerPCB. WhenreplacingtheDCControllerPCBfortroubleshootingatthe timeoftroubleoccurrence Selecttheitem,andthenpressOKkey. Duringoperation,thesettingdatachangesbymanualor automaticadjustment.Whenbackupdatawhichhasbeenleft foralongperiodoftimeisrestored,itisoverwrittenbytheold settingdataandthenewdataisdeleted. COPIER>FUNCTION>SYSTEM>DSRAMBUP BackupofReaderControllerPCBSRAM TobackupthesettingdatainSRAMoftheReaderController PCB. WhenreplacingtheReaderControllerPCBfortroubleshooting atthetimeoftroubleoccurrence Selecttheitem,andthenpressOKkey. Duringoperation,thesettingdatachangesbymanualor automaticadjustment.Whenbackupdatawhichhasbeenleft foralongperiodoftimeisrestored,itisoverwrittenbytheold settingdataandthenewdataisdeleted. COPIER>FUNCTION>SYSTEM>RSRAMRES -
8-268
8
COPIER
OPTION
FNC-SW
COPIER>OPTION>FNC-SW
MODEL-SZ Lv.1 Details
8-269
COPIER>OPTION>FNC-SW
SCANSLCT Lv.2 Details ON/OFFofscanareacalculatefunction TosetON/OFFofthefunctiontocalculatescanningareafromthe specified paper size. Whenthepapersizeislargerthantheoriginalsize,selectingON reducesproductivitybecausethescanningareagetslarger. Whenmatchingthescanningareawiththepapersize 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF(calculatedfromthedetectedoriginalsize) 1: ON (calculated from the specified paper size)
Fixed magnifictn & DADF orgnl dtct size To set the fixed magnification ratio display and the original detectionsizewithDADF. ItissetautomaticallyatthetimeofinstallationoftheReader accordingtothelocation. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania, South America
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DH-SW Lv.2 Details
Thedefaultdiffersaccordingtothelocation.
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofautoD-halfcontrol TosetON/OFFofautoD-halfcontrol. ExecutionintervalcanbesetbyCOPIER>OPTION>IMGMCON>DH-TMG. -WhenD-half-relatedfailureoccurs/whenidentifyingthecauseof D-half-relatedfailure -Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Besuretosetthevaluebackto1(ON)afterservicing. 0to1 0:OFF,1:ON
1 COPIER>OPTION>IMG-MCON>DH-TMG
8-269
8
COPIER>OPTION>FNC-SW
SENS-CNF Lv.2 Details
8-270
COPIER>OPTION>FNC-SW
W/SCNR Lv.1 Details SettingofReaderUnitinstallation TosetinstallationoftheReaderUnit. 1(installed)isautomaticallyselectedoncetheReaderUnitis detectedatthestartofthemachine. Wheninstalling/removingtheReaderUnit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notinstalled,1:Installed
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONFIG Lv.1 Details Usecase Adj/set/operatemethod
Settingoforiginaldetectionsize To set original detection size according to AB configuration/Inch configuration/A configuration. Select 1 (Inch configuration) for Inch configuration/A configuration machine. WhenreplacingtheReaderControllerPCB/clearingRAMdata 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: AB configuration, 1: Inch configuration
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ORG-LGL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Accordingtothesettingatshipment
Setcountry/area/lang/location/pprsize Tosetthecountry/region,language,location,papersize configuration for multiple system software in HDD. Uponuser'srequest 1)Selectthesettingitem. 2)Switchwith+/-key,andthenpressOKkey. 3)TurnOFF/ONthemainpowerswitch. XXYY.ZZ.AA XX:Country/region(e.g.JP:Japan) YY: Language (fixed, e.g. ja: Japanese) ZZ: Location (fixed, e.g. 00: CANON) AA: Paper size configuration (00: AB configuration, 01: Inch configuration, 02: A configuration, 03: Inch/AB configuration)
SpecialpapersizesetinDADFmode:LGL To set the size of special paper (LGL configuration) that cannot be recognizedinDADFstreamreadingmode. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to10 0:LEGAL-R,1:FOOLSCAP-R,2:OFICIO-R,3:FOLIO-R,4: AustralianFOOLSCAP-R,5:EcuadorOFICIO-R,6:Bolivia OFICIO-R,7:ArgentineOFICIO-R,8:ArgentineLEGAL-R,9: GovernmentLEGAL-R,10:MexicoOFICIO-R
Caution Display/adj/setrange
COPIER>OPTION>FNC-SW>MODEL-SZ
8-270
8
COPIER>OPTION>FNC-SW
ORG-LTR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-271
COPIER>OPTION>FNC-SW
ORG-LDR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ORG-B5 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SpclpprsizesetinDADF:LDR:Reader To set the size of special paper (LDR configuration) that cannot be recognizedinDADFstreamreadingmode. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ForoutsideJapanonly 0to1 0:LEDGER-R,1:ArgentineLETTER
SpecialpapersizesetinDADFmode:LTR To set the size of special paper (LTR configuration) that cannot be recognizedinDADFstreamreadingmode. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:LETTER,1:EXECUTIVE,2:ArgentineLETTER,3:Government LETTER
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ORG-LTRR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SpclpprsizesetinDADF:LTRR:Reader To set the size of special paper (LTR-R configuration) that cannot berecognizedinDADFstreamreadingmode. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ForoutsideJapanonly 0to3 0:LTR-R,1:G-LTR-R,2:A-LTR-R,3:EXECUTIVE-R
SpecialpapersizesetinDADFmode:B5 Tosetthesizeofspecialpaper(B5)thatcannotberecognizedin DADFstreamreadingmode. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: B5, 1: Korean government office paper
8-271
8
COPIER>OPTION>FNC-SW
INTROT-1 Lv.1 Details
8-272
COPIER>OPTION>FNC-SW
INTROT-T Lv.1 Details Setofautoadjustmentstandbyinterval Tosetthecontinuousstandbytimeuntilexecutionofauto adjustment. When the standby condition continues more than the specified time,thePhotosensitiveDrumstartsidlerotationfor30seconds. Asthevalueisincrementedby1,thetimegets1hourlonger. TheautoadjustmentduringstandbyisavailablewhenAUTO-DH is1:ON. -Whenimagesmearoccurs -Whenadjustingtimeforwarm-uprotationsorrotationtobe performed first time for the day 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. If the value is too large, flip of the Drum Cleaning Blade may occur. 1to10 1hour 2 COPIER>OPTION>IMG-DEV>AUTO-DH
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTROT-2 Lv.1 Details
Setini/lastrotationautoadjexeintvl Tosetthepaperintervaltoexecuteprocessautoadjustment (analogpatchsequence,etc.)atinitial/lastrotation. Asthevalueisincrementedby1,theintervalisincreasedby500 sheets. When 0 is specified, the control is not executed. Whenmatchingtheuseenvironmentoftheuser. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Increasingthenumberofsheets(wideningtheinterval)causes higherfrequencyofimagefailure. 50to1000 1sheet 100
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BK-4CSW Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setoflastrotationautoadjexeintvl Tosetthepaperintervaltoexecuteautoadjustment(potential control,patchpotentialcontrol,D-maxcontrol,D-halfcontrol)at lastrotation. Asthevalueisincrementedby1,thepaperintervalisincreased by 1 sheet. When 0 is specified, the control is not executed. Whenmatchingtheuseenvironmentoftheuser. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Increasingthenumberofsheets(wideningtheinterval)causes higherfrequencyofimagefailure. 50to1000 1sheet 500
ON/OFFsimplefullclrmodeatphotomode 3.5mmpitchunevennessmayoccurwhenprintingthesolidblack imagewithusingB&WmodeinText/PhotoPrintoutMode.This isbecausetheITBslipsduetotherotationspeeddifference betweentheITBandthePhotosensitiveDrum. Insuchacase,setwhethertousethesimplefullcolormodethat createsblackwithusingasmallamountofY,MandCtoner. InText/Photo/MapMode,itisprintedinB&Wmode. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-272
8
COPIER>OPTION>FNC-SW
MODELSZ2 Lv.2 Details Usecase Adj/set/operatemethod Caution
8-273
COPIER>OPTION>FNC-SW
FXWRNLVL Lv.2 Details SetFixingFilmlifedisplaythresholdVL TosetthethresholdvaluetodisplaythelifeofFixingFilm. Thisitemisenabledwhenthevalueatthefollowingissetto"1" (default:0):COPIER>OPTION>DSPLY-SW>FXMSG-SW(ON/ OFFofFixingAssemblyreplacementmessage) ThelifejudgmentcounterisstoredintheDCController.Itisnot possibletochangeorcheckthecountervalue. To prevent the fixing failure caused by the continuous use of FixingFilmthatexceedsthelife. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:Alarmmessagenotdisplayed 1:Alarmmessagedisplayedwhenthelifejudgmentcounter reaches the specified value 2,3:Notused
Display/adj/setrange
Pprsizedtctglobalsupportinbookmode TosetON/OFFforglobalsupportofdocumentsizedetectionin copyboardreadingmode. Uponuser'srequest(mixedmediaoriginalwithAB/Inch configuration) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -Donotusethisatthenormalservice. -TheDocumentSizeSensor(PhotoSensor)isadditionally requiredtocorrectlydetectthedocumentsizewhentheoriginal consists of mixed media (AB/Inch configuration). 0to1 0:Detectedwithdetectionsizeaccordingtolocation,1:Detected withAB/Inchmixedmedia.
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SVMD-ENT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Settingofentrymethodtoservicemode Tosetthewaytogetinservicemodetopreventinformationleak. Asneeded 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:[Settings/Registration]-Pressing[2]and[8]atthesametime- [Settings/Registration] 1:[Settings/Registration]-Pressing[4]and[9]atthesametime- [Settings/Registration]
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BASE-SW Lv.1 Details
0 COPIER>OPTION>DSPLY-SW>FXMSG-SW
ModelswitchsetfromMEAP-FulltoBase ToswitchfromtheMEAP-FullmodeltotheBasemodel. SwitchthismodeinthecaseofrestrictingtheoperationofMEAP applicationfortroubleanalysis. WhentroublethatcausedbyMEAPapplicationoccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. SwitchfromtheBasemodeltotheMEAP-Fullmodelisnot available. 0to1 0:OFF(Basemodel),1:ON(Fullmodel)
Dependingonthesettingofoptionbit(MeapModelBIT).
8-273
8
COPIER>OPTION>FNC-SW
KSIZE-SW Lv.2 Details Usecase Adj/set/operatemethod Caution
8-274
COPIER>OPTION>FNC-SW
PDF-RDCT Lv.2 Details PDFreductionsetatforwarding Tosetwhethertoreducetheimagefortransmissionwhen converting the image received by IFAX into PDF for e-mail/file transmission. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Followingthecurrentsetting,1:Imagereduction
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ORG-A4R Lv.2 Details
SetofChinesepaper(K-size)support Tosettodetect/displaytheChinesepaper(Ksizepaper:8K, 16K). WhenusingKsizepaper 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Gothroughthefollowing:COPIER>OPTION>FNC-SW> MODEL-SZ; and if MODEL-SZ is "0: AB configuration", this mode isenabled. 0to1 0:Notsupported,1:Supported
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo REBOOTSW Lv.2 Details
0 COPIER>OPTION>FNC-SW>MODEL-SZ 8Kpaper:270x390mm,16Kpaper:270x195mm SpecialpapersizesetinDADFmode:A4R Tosetthesizeofspecialpaper(A4R)thatcannotberecognized inDADFstreamreadingmode. WhenpickingupA4RsizeoriginalfromtheDADFoftheInch/AB configuration models, the size is converted into the specified size sothatanimagecanbeformedproperly. -Uponuser'srequest -WhenpickingupspecialpapersizeoriginalfromDADF 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:A4R,1:FOLIO-R
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
RestartsettingatE240erroroccurrence TosetwhethertorebootinthecaseofE240error. InthecaseofE240error,themachineisautomaticallyrebooted duetothepossibilityofcontinuousoperationofthedrivesystem whilethespooledprintjobiscleared. Printjobcanbeobtainedifselectingthesettingnottoreboot. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -Donotusethisatthenormalservice. -Besuretogetapprovalfromtheuserbytellingthepossibilityof continuousoperationofthedrivesysteminthecaseofE240error. 0to1 0:Rebooted,1:Notrebooted
E240error:CommunicationerrorbetweentheMainControllerand theDCController.
8-274
8
COPIER>OPTION>FNC-SW
SJB-UNW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo WEBV-SW Lv.2 Details
8-275
COPIER>OPTION>FNC-SW
CARD-RNG Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COMP-PRT Lv.2 Details Cardnumbersetting(departmentnumber) Tosetthenumberofcards(departments)thatcanbeusedwith theCardReader. Whensettingthenumberofcards(departments) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1000
1000
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode
ON/OFFofWebDAVfunction TosetON/OFFofWebDAVfunction. OFFsettingcanreducememoryuseofthemachine.Inaddition, thefollowingWebDAV-relateditemsarehiddeninusermode. -Settings/Registration>SetDestination>RegisterDestinations> RegisterNewDest.>File>Protocol>WebDAV -Settings/Registration>FunctionSettings>Send>Common Settings>UseDividedChunkSendforWebDAVTX Whenreducingmemoryuseofthemachine 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:ON,1:OFF
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Img proc memory allocate at job conflict Whenmaking2ormorecompositionprints(pagenumber,number ofcopies,stamp,date,booklet,watermark),memoryforimage processingisallottedpreferentiallytoprintjobs. Meanwhile,memoryforimageprocessingofscan/sendand PDL input becomes insufficient depending on the options and documentsize,andthesejobsmightbeunprocesseduntil composition prints are finished. Ifthesejobsareinterferedeachother,imageprocessingcanbe putforwardlittlebylittlebyallottingmemoryequallytoeachjob. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Printpriority,1:Equalallocation
Supplement/memo
8-275
8
COPIER>OPTION>FNC-SW
ARCDT-SW Lv.1 Details
8-276
COPIER>OPTION>FNC-SW
PT-W-SET Lv.2 Details Settonerbandwidthatinirotn:transp TosetthetonerbandwidththatiscreatedontheITBattheinitial rotationwhenfeedingthetransparency. Asthevalueisincrementedby1,thetonerbandwidthis increasedby10mm. Whenthevalueisincreased,imagefailureduetoTransfer CleaningBladeboundisreducedwhenfeedingthetransparency. WhenimagefailureduetoTransferCleaningBladeboundoccurs ontransparency 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to10 10mm 5
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SJOB-CL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofARCDATcontrol TosetON/OFFofARCDATcontrol. When "1: OFF" is set, the result of ARCDAT control is not reflected toLUT. Whenthehuevariationoccursinthecaseoffailurevalue displayedinCOPIER>DISPLAY>HT-C,turnOFFtheARCDAT controlonceandcheckthehue. Ifhuevariationisalleviated,analyzethecauseofARCDATcontrol error(developer,PatchSensor,etc.). Whenhuevariationoccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Makesuretoset"0:ON"againwhenARCDATcontrolrecovers. 0to1 0:ON,1:OFF
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DELV-FN2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
0 COPIER>DISPLAY>HT-C
Setofscanjobcancelingbylogout Tosetwhethertocancelthescanjobinoperationbylogoutofthe user. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -Thejobinscanningoperationcannotbecanceled. -Cancelbylogoutiskeptinthelog. 0to1 0:Disabled,1:Enabled
Scanjob:Ajobafterthescanningoperationiscompleted.
8-276
8
COPIER>OPTION>FNC-SW
USB-RCNT Lv.2 Details
8-277
COPIER>OPTION>FNC-SW
MIBCOUNT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange ScoperangesetofChargeCounterMIB Tosettherangeofcounterinformationthatcanbeobtainedas MIB(ManagementInformationBase). 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Allchargecountersareobtained,1:Onlydisplayedcounter*is obtained,2:Allchargecountersarenotobtained * : Counter specified by the following: COPIER > OPTION > USER >COUNTER1to6
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UNLMTBND Lv.1 Details
AutoconnectsetatUSBdevicedisconnct Tosettoenable/disableautomaticconnectionwhentheUSB deviceisdisconnected. Withthesettingtodisableautomaticconnection,USBdevice cannotbeusedifdisconnectingandthenconnectingtheUSB device.Toenableconnectionagain,thepowerneedstobeturned OFF/ON. Withthesettingtoenableautomaticconnection,connectagain afterdisconnecting,andthenconnectingtheUSBdeviceagain. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Withthesettingtoenableautomaticconnection,disconnectingof 1areamakesautomaticconnectionofallUSBdevicesifthereis USBhub. 0to1 0:Noautomaticconnection,1:Automaticconnection
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RMT-CNSL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
0 COPIER>OPTION>USER>COUNTER1to6
Over400bindersprintjobsupportset Tosetwhethertosupportprintjobthatexceeds400binders. Withthesettingtosupport,themachinemakesprintbysharing bindersaccordingtojobattribution. Select"1:Notsupported"iftheuserdoesnotprintjob*withlarge quantityofbinders. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Automaticsetting(whentheprintserverisnotconnected:no support;Whentheprintserverisconnected:supported) 1:Notsupported
* : A job that requires finishing (such as stapling) in one job. Does not apply in the case of executing finishing with multiple sets of output.
8-277
8
COPIER>OPTION>FNC-SW
MEAP-PRI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CNTR-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-278
COPIER>OPTION>FNC-SW
W/RAID Lv.1 Details SettingofRAIDBoardinstallation TosetinstallationconditionofRAIDBoard(HDDMirroringKit). Select"1:Installed"wheninstallingtheRAIDBoard.Select"0:Not installed"whenremovingtheRAIDBoard. Wheninstalling/removingRAIDBoard 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notinstalled,1:Installed
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PSWD-SW Lv.1 Details
Passwordtypesettoenterservicemode Tosetthetypeofpasswordthatisrequiredtoenterwhengetting intoservicemode. 2typesareavailable:onefor"servicetechnician"andtheother for"systemadministrator+servicetechnician". Whenselectingthetypefor"systemadministrator+service technician",enterthepasswordforservicetechnicianafterthe passwordentrybytheuser'ssystemadministrator. Uponrequestfromtheuserwhoconcernssecurity 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Nopassword,1:Servicetechnician,2:Systemadministrator+ servicetechnician
8-278
8
COPIER>OPTION>FNC-SW
SM-PSWD Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RPT2SIDE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-279
COPIER>OPTION>FNC-SW
BRWS-FAV Lv.2 Details Setofservicebrowserfavoriteregister Tosetwhethertoallowregistrationoffavoritesinthebrowserfor service. When1isset,favoritesinthebrowserforservicecanbeedited, andanyURLscanbeaccessed. Whenserviceengineerseditfavoritesinthebrowserforservice 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Disabled,1:Enabled
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PSCL-MS Lv.1 Details
11111111 COPIER>OPTION>FNC-SW>PSWD-SW
1 COPIER>FUNCTION>MISC-P>P-PRINT Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setautogradationadjoperation:heavy Tosetatwhichspeed(1/1speed,1/2speed,or1/3speed) PASCALcontrolandD-halfcontrolareexecutedatautogradation adjustment. When2isset,theyareexecutedforthelastlyusedspeedonly. Requiredtimeforautogradationadjustmentisshortwhileittakes timetoswitchtootherspeed. This is suitable for the users who frequently use a specific paper type. When3isset,theyareexecutedforallspeedssimultaneously. Requiredtimeforautogradationadjustmentislong(approx.3 minutes)whileitisquicktoswitchtootherspeed.Thisissuitable fortheuserswhousevariouspapertypes. Whensettingthespeedaccordingtothematerialsusedbythe user 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 2to3 2:Lastlyusedspeed,3:Allspeeds
8-279
8
COPIER>OPTION>FNC-SW
DMX-DISP Lv.1 Details
8-280
COPIER>OPTION>FNC-SW
INVALPDL Lv.1 Details DisableofPDLlicense TodisabletheregisteredPDLlicense. When"1:Disabled"isset,PDLisdisabledevenifaPDLlicense isregistered.Thisissettothemachinesinstalledatconvenience stores,whichdonotallowPDLtobeused. WhenprohibitingtheuseofPDL 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:RegisteredPDLlicenseisenabled,1:Disabled
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STND-PNL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFautogrdtnadjD-maxPASCALctrl TosetwhethertoexecuteD-maxPASCALcontrolatfull adjustmentofautogradationadjustment. When"0:ON"isset,D-maxPASCALcontrolandPASCALcontrol areexecuted.FourA4-sizesheetsareusedfortestprints(Onefor D-maxPASCALcontrolandthreeforPASCALcontrol) When"1:OFF"isset,PASCALcontrol(gradationadjustment) onlyisexecuted.ThreeA4-sizesheetsareusedfortestprints(for PASCALcontrol). Whenmakingthesettingaccordingtotheusageoftheuser 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:ON,1:OFF
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo IMGCNTPR Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-280
8
COPIER>OPTION>FNC-SW
CDS-FIRM Lv.1 Details
8-281
COPIER>OPTION>FNC-SW
CDS-UGW Lv.1 Details Set to allow firmware update from UGW To set whether to permit update of the firmware from the UGW server. When"1:Enabled"isset,Updateracceptstheoperationfromthe UGWserverincooperationwithCDS. When allowing update of the firmware from the UGW server 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: Disabled, 1: Enabled (This setting can be specified for China, KoreaandTaiwanmodelsonly.)
Set to allow firmware update by admin To set whether to permit update of the firmware by user (administrator). When"1:Enabled"isset,Updatercanbeactivatedfromtheuser mode. When allowing the administrator to update the firmware 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: Disabled, 1: Enabled (This setting can be specified for China, KoreaandTaiwanmodelsonly.)
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CDS-MEAP Lv.1 Details
SettoallowMEAPinstallbyadmin Tosetwhethertopermittheuser(administrator)toinstallMEAP applicationsandenableiRoptionsfromCDS. When"1:Enabled"isset,Updatercanbeactivatedfromtheuser mode. WhenallowingtheadministratortoinstallMEAPapplicationsand enableiRoptionsfromCDS 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: Disabled, 1: Enabled (This setting can be specified for China, KoreaandTaiwanmodelsonly.)
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LOCLFIRM Lv.1 Details
CDS:ContentsDeliverySystem Set to allow firmware update by file Tosetwhethertopermittheuser(administrator)toupdatethe firmware from the remote UI using a local file. Thisupdateisexecutedasameasureforvulnerabilityin emergencysituations. When allowing the administrator to update the firmware using a file 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: Disabled, 1: Enabled (This setting can be specified for China, KoreaandTaiwanmodelsonly.)
CDS:ContentsDeliverySystem
8-281
8
COPIER>OPTION>FNC-SW
RSHDW-SW Lv.1 Details
8-282 DSPLY-SW
COPIER>OPTION>DSPLY-SW
UI-COPY Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-BOX Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Display/hideofcopyscreen Tosetwhethertodisplayorhidethecopyfunction. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MC-FANSW Lv.1 Details
ON/OFFofremoteshutdown Asharedmulti-functionmachineisnotlikelytobeshutdownat powerfailure.SetON/OFFoftheremoteshutdownfunctionto preventaccident. When"1:ON"isset,themachinecanbeshutdownfromthe remoteshutdownmenudisplayedintheremoteUI. When preventing an accident at specified power-off time. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofControllerFancontrol Tosetfullspeed/halfspeedtofancontroloftheControllerFan1 and2. When "1: Full speed" is set, the heat exhaust efficiency is enhanced. -WhenHDDdamageoccursmultipletimes -Whenthemachineisinstalledinhightemperatureenvironment inwhichHDDdamageislikelytooccur 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Halfspeed,1:Fullspeed
Display/hideofInboxscreen TosetwhethertodisplayorhidetheInboxfunction. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:NoInboxfunction(StoringisnotavailableevenwithPDLto Inbox.) 1:Inboxfunctionisactive 2:Inboxfunctionisactive(withlimitation;Storingisavailablewith PDLtoInboxdespitenodisplayontheControlPanel/remoteUI)
T-8-47
8-282
8
COPIER>OPTION>DSPLY-SW
UI-SEND Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-FAX Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-283
COPIER>OPTION>DSPLY-SW
T-LW-LVL Lv.2 Details Distimingoftonerlevelwarningmssg Tosetthethresholdvalueofresidualtonerinthehopper. Whentheresidualtonerlevelbecomeslowerthanthethreshold, awarningmessageof"Thetonercontainercanbereplaced (continuousprintisavailable)"isdisplayedontheControlPanel. Whenthevalueisincrementedby1,thethresholdisincreased by20%.Asthesmallervalueisset,themessagetimingtobe displayedbecomesearlier. -Uponuser'srequest -Atthetimingthattheserviceengineervisitstothecustomer,etc. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 5to100 1% 10
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo NWERR-SW Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
OFF/ONofnetwork-relatederrordisplay TosetOFF/ONofnetwork-relatederrormessagedisplay. Whensetting"0:OFF"whilethemachineisnotconnectedto network,theerrormessage"Checkthenetworkconnection."is notdisplayed. Whenusingthemachineasacopymachine 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
1:Normalmodel,0:Self-copymodel
8-283
8
COPIER>OPTION>DSPLY-SW
UISW-DSP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo T-CRG-SW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-284
COPIER>OPTION>DSPLY-SW
FXMSG-SW Lv.2 Details ON/OFFofFixingAssemblyreplacemssg Tosetwhethertodisplaythemessagepromptingthereplacement ofFixingAssemblyontheControlPanelwhenthelifejudgment counter reaches the specified value. When1(default:0)issetinFXMSG-SWandalso1(default: 0)issetinCOPIER>OPTION>FNC-SW>FXWRNLVL,thelifeof FixingAssemblyisdetected. WhentheFixingAssemblyreachestheendoflife,theFixing Assembly replacement message: Prepare new fixing roller. Call servicerepresentative.isdisplayed. Whenthemessageisdisplayed,gothroughthefollowing procedure. 1)AfterturningOFFthemainpowerswitch,replacetheFixing FilmUnit+PressureRollerandFixingAssembly. 2)AfterturningONthemainpowerswitch,executeCOPIER> FUNCTION>CLEAR>CNT-DCON. 3)TurnOFF/ONthemainpowerswitch.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
0 COPIER>OPTION>FNC-SW>FXWRNLVL COPIER>FUNCTION>CLEAR>CNT-DCON
8-284
8
COPIER>OPTION>DSPLY-SW
MEAP-DSP Lv.2 Details
8-285
COPIER>OPTION>DSPLY-SW
UI-PRINT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo IMGC-ADJ Lv.1 Details Display/hideofprintjobscreen Tosetwhethertodisplayorhidetheprintjobscreen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ScreenswitchsetfromMEAPtostandard Tosettoenable/disableswitchingfromMEAPscreentothe standardscreen(COPY/SEND/MailBoxscreen,etc).(Settingto display/hidethearrowmarkonMEAPscreen) Inthecaseofanerror/jam/alarm,thescreenisswitchedtothe standardscreentodisplaywarningevenifdisablingthismode. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Enabled,1:Disabled
0 COPIER>OPTION>DSPLY-SW>ANIM-SW IfdisablingtheswitchwithANIM-SW,thescreenwillnotbe switchedtothestandardscreeneveninthecaseofanerror/jam/ alarm. ScreenswitchsetfromMEAPtowarning Tosettoenable/disableswitchingfromMEAPscreentotheerror/ jamscreen. Ifdisablingthismode,thescreenwillnotbeswitchedtothe warningscreeninthecaseofanerror/jam/alarm,andamessage isappearedontheMEAPscreenindicatingtocontacttheservice person. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Enabled,1:Disabled(Nodisplayofwarningscreen)
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Dis/hideofimgadjiteminusermode Tosetwhethertodisplayorhidetheitemrelatingtoimage adjustmentinusermode. Whenselectingdisplaysetting,detailedimageadjustment procedure will be displayed only for the duplicated paper specified withthefollowingsettings:Preferences>PaperSettings>Set PaperTypeManagement. Asneeded 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Preferences>PaperSettings>SetPaperTypeManagement
8-285
8
COPIER>OPTION>DSPLY-SW
UI-RSCAN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-EPRNT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-286
COPIER>OPTION>DSPLY-SW
UI-WEB Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-HOLD Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Display/hideofWebbrowserscreen TosetwhethertodisplayorhidetheWebbrowserscreen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display
Display/hideofholdjobscreen TosetwhethertodisplaytheholdjobscreenontheControl Panel. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:Hide(PODfunctionOFF,JALOFF) 1:Display(PODfunctionON,JALOFF) 2:Hide(PODfunctionOFF,JALON) 3:Hide(PODfunctionOFF,JALON)
8-286
8
COPIER>OPTION>DSPLY-SW
TNR-WARN Lv.1 Details
8-287
COPIER>OPTION>DSPLY-SW
UI-MEM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-NAVI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ON/OFFofmemorymediascreendisplay TosetON/OFFofthememorymediascreendisplayonthe ControlPanel. WhennotdisplayingthememorymediascreenontheControl Panel 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UI-SBOX Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
OtherthanUSA:0,ForUSA:1
0:Europe,1:OtherthanEurope
8-287
8
COPIER>OPTION>DSPLY-SW
UI-MOBP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FCOT-DSP Lv.1 Details
8-288 NETWORK
COPIER>OPTION>NETWORK
RAW-DATA Lv.2 Details Settingofreceiveddataprintmode Tosetprintmodeforthereceivedimagedata. Thisitemisusedtoidentifythecausewhetherit'sduetoimage dataorimageprocessinginthecaseoftroublewithreceived image. Whenreceivedimagetroubleoccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Besuretosetthevaluebackto"0:normalprintoperation"after recoveringfromthetrouble. 0to1 0:Normalprintoperation,1:Printwithoriginaldatawithoutimage processing
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofFCOTprioritymodeinusermode Tosetwhethertodisplay"Color/BlackPriorityforFirstPrintTime" intheusermode. When1isset,thehomepositionofthePrimaryTransferRollers forY,M,Ccanbeswitched. Whensetting"Color/BlackPriorityforFirstPrintTime"intheuser mode 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RMT-LANG Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Adjustment/Maintenance>AdjustAction>Color/BlackPriorityfor FirstPrintTime
T-8-48
8-288
8
COPIER>OPTION>NETWORK
IFAX-LIM Lv.2 Details
8-289
COPIER>OPTION>NETWORK
SMTPRXPN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo POP3PN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FTPTXPN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SettingofSMTPreceptionportnumber TosetSMTPreceptionportnumber. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SMTPTXPN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
No.ofmaxprintlinesatIFAXreception Tosetthemaximumnumberoflinesfore-mailtexttobeprinted whenreceivingIFAX. Settingofthisitemcanpreventendlessprintingoftheattached file data in the case of receiving an error e-mail or failure in interpretationofthecontext. Selecting0printstheheader/footerin1sheetwhenreceiving e-mail text without attached file. Whenpreventingendlessprintinthecaseoffailureinreception 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:E-mailtextnotprinted,999:Unlimited
25
500
110
25
Specification of SEND port (FTP) number Tospecifyaddressport(FTP)numberforSEND. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535
21
8-289
8
COPIER>OPTION>NETWORK
STS-PORT Lv.2 Details
8-290
COPIER>OPTION>NETWORK
NS-CMD5 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LimitCRAM-MD5authmethodatSMTPauth TorestrictuseofCRAM-MD5authenticationmethodatthetimeof SMTPauthentication. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:SMTPserver-dependent,1:Notused
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofTOTsyncstatuscomctnport TosetON/OFFforInquiry/Response(sync)-modestatus communicationportwithT.O.T. Select"1:ON"inthecaseofconnectingthePCandthemachine withthecrosscablewhileServiceNAVIisused. WhentheServiceNAVIisused 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
0 COPIER>OPTION>NETWORK>CMD-PORT T.O.T:TUIFoverTCP.Communicationprotocoltobeusedfor communicationwiththebuilt-inapplication(UI)andtheinternal applicationsuchasCOPY/SEND/BOX,etc.(Canon'sown protocol). ON/OFFTOTasynccommandcomctnport TosetON/OFFforasynchronouscommandcommunicationport withT.O.T. Select"1:ON"inthecaseofconnectingthePCandthemachine withthecrosscablewhileServiceNAVIisused. WhentheServiceNAVIisused 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
NS-GSAPI Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SMTPauthentication:Protocolinwhichuserauthentication functionisaddedtoSMTP,whichistheprotocoltobeused fore-mailtransmission.Atthetimeofe-mailtransmission,this protocolexecutesauthenticationoftheuseraccountandthe passwordbetweentheSMTPserverandtheusertoapprove e-mailtransmissiononlywhenit'sauthenticated. LimitGSSAPIauthmethodatSMTPauth TorestrictuseofGSSAPIauthenticationmethodatthetimeof SMTPauthentication. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:SMTPserver-dependent,1:Notused
8-290
8
COPIER>OPTION>NETWORK
NS-NTLM Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-291
COPIER>OPTION>NETWORK
NS-PLN Lv.2 Details LimitplaintxtauthatSMTPauthnoencry TorestrictuseofPLAIN/LOGINauthentication,whichisplaintext, atthetimeofSMTPauthenticationundertheenvironmentwhere thecommunicationpacketisnotencrypted. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:SMTPserver-dependent,1:Notused
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SMTPauthentication:Protocolinwhichuserauthentication functionisaddedtoSMTP,whichistheprotocoltobeused fore-mailtransmission.Atthetimeofe-mailtransmission,this protocolexecutesauthenticationoftheuseraccountandthe passwordbetweentheSMTPserverandtheusertoapprove e-mailtransmissiononlywhenit'sauthenticated. LimitcleartextauthatSMTPauthencry TorestrictuseofPLAIN/LOGINauthentication,whichiscleartext, atthetimeofSMTPauthenticationundertheenvironmentwhere thecommunicationpacketisencrypted. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:SMTPserver-dependent,1:Notused
NS-LGN Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SMTPauthentication:Protocolinwhichuserauthentication functionisaddedtoSMTP,whichistheprotocoltobeused fore-mailtransmission.Atthetimeofe-mailtransmission,this protocolexecutesauthenticationoftheuseraccountandthe passwordbetweentheSMTPserverandtheusertoapprove e-mailtransmissiononlywhenit'sauthenticated. LimitLOGINauthenticationatSMTPauth TorestrictuseofLOGINauthenticationatthetimeofSMTP authentication. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:SMTPserver-dependent,1:Notused
8-291
8
COPIER>OPTION>NETWORK
MEAP-PN Lv.2 Details Usecase Adj/set/operatemethod Caution
8-292
COPIER>OPTION>NETWORK
DA-CNCT Lv.2 Details Usecase Adj/set/operatemethod Caution ConnectionsettingofWPGW TosetWPGWconnection. ThismodeisusedfortheJapanesemodelsonlyandnotused withoverseasmodels(outsideJapan) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Gothroughthefollowing:COPIER>OPTION>ACC>COIN;and ifthesettingvalueforCOINischangedfrom0/1/2to3(selectDA charge),thevalueisautomaticallyturns1. 0to1 0:OFF,1:ON
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DA-PORT Lv.2 Details Usecase Adj/set/operatemethod Caution
HTTPportNo.settingofMEAPapplication TosetHTTPportnumberofMEAPapplication. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotspecifyport8080whenthePrintServerisconnected. Otherwise,youcannotbrowsethedeviceRUIinwhichMEAP authenticationapplicationisrunning(Port8080isreservedfor redirectionofEFIcontrollertotheiRside.) 0to65535
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CHNG-STS Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8000
PortsettingwithDA TosetthecommunicationportwhenDAisinstalled. SelectONwhenDAisinstalled. WhenDAisinstalled(ThismodeisusedfortheJapanesemodels onlyandnotusedwithoverseasmodels(outsideJapan)) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whengoingthroughthefollowing:COPIER>OPTION> NETWORK>DA-CNCT,andselecting1forDA-CNCT,the followingitemisalsoON: COPIER>OPTION>NETWORK>STS-PORT,CMD-PORT,DAPORT 0to1 0:OFF,1:ON(Wheninstalled)
20010 COPIER>OPTION>NETWORK>STS-PORT
DA:DigitalAccessory
8-292
8
COPIER>OPTION>NETWORK
CHNG-CMD Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MEAP-SSL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LPD-PORT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-293
COPIER>OPTION>NETWORK
WUEV-SW Lv.2 Details Setting of sleep notification execution Tosetwhethertonotifythesleepmodetotheapplication (imageWARE,etc)onthenetworkwhenshiftingto/recovering fromthesleepmode. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: Notified, 1: Not notified
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo WUEV-INT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
20000 COPIER>OPTION>NETWORK>CMD-PORT
8443
Setting of sleep notification interval To set the interval of sleep notification. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ThisisactivewhenCOPIER>OPTION>NETWORK>WUEV-SW is set to 0: Notified. 60to65535 1second 600 COPIER>OPTION>NETWORK>WUEV-SW
515
LPDport:NetworkportforTCP/IPcommunicationwhenmaking printsthroughnetwork.
8-293
8
COPIER>OPTION>NETWORK
WUEV-POT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo WUEV-RTR Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-294
COPIER>OPTION>NETWORK
WUEN-LIV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DHCP-12 Lv.2 Details Recoverytimesettingaftersleepnotice Tosetthetimefromthesleepstartfromnetworkwithoutjob assignmentuntilthemodeisshiftedtothesleepmode. When setting the startup time after sleep notification 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 10to600 1second 15
11427 COPIER>OPTION>NETWORK>WUEV-SW
Setting of sleep notification range Tosetthenumberofavailablerouterstothetargetforsleep notification. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ThisisactivewhenCOPIER>OPTION>NETWORK>WUEV-SW is set to 0: Notified. 0to254
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofDHCP-option12request TosetON/OFFofinquiryonthehostname(Option12)which usesOption55ofDHCP. SelectingOFFcanpreventDHCPpacketfromincludingOption12 orOption81underthepacket-monitoringnetworkenvironment. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
3 COPIER>OPTION>NETWORK>WUEV-SW
8-294
8
COPIER>OPTION>NETWORK
DHCP-81 Lv.2 Details
8-295
COPIER>OPTION>NETWORK
IFX-CHIG Lv.1 Details SetoperationbyIFAXrecvmailcontent TosetthenumberofcharactersfortheIFAXreceivedmailcontent, sothatthemailisnotprinted/forwardedwhenthecharactersin the text is less than the number of specified characters. Thismachinecanoutputblankpaperbecausesomesenders sende-mailtextconsistsoflinefeedcodesonly.Insuchcase, specify2(numberofcharacters)sothattherewillbenooutputof blankpaper. Inthecaseofspecifyinganynumberotherthan0,header/footer isprinted/forwardedin1sheetonlyifthee-mail(body)textisless than the specified value while no TIFF file is attached. Asthevalueisincrementedby1,thenumberoftargetcharacters ine-mailbodytextisincreasedby1character. Whenreducingprintofblankpaperduetoe-mailreceivedby IFAX. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Besuretogetapprovalfromtheuserbytellingthattherewillbe noprintofe-mail(body)textifthenumberofcharactersisless than the specified value. 0to999 0:E-mail(body)textisnotignored. 1character 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFIPaddressdynamicchnginDHCP-81 TosetON/OFFfordynamicchangeofIPaddressbyOption81of DHCP. SelectingOFFcanpreventDHCPpacketfromincludingOption12 orOption81underthepacket-monitoringnetworkenvironment. SelectingONenablesdynamicchangeofIPaddressbyOption81 ofDHCPinthecasethatthedynamicDNSsettingisONinuser mode. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. BesuretosetONforthedynamicDNSsettinginusermodeto enabledynamicchangeofIPaddress. 0to1 0:OFF,1:ON
Display/adj/setrange DHCP: Dynamic Host Configuration Protocol Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-295
8
COPIER>OPTION>NETWORK
DNSTRANS Lv.1 Details
8-296
COPIER>OPTION>NETWORK
WOLTRANS Lv.1 Details Settingofsleeprecoveryprotocol Tosettheprotocolforrecoveryfromsleepmodeaccordingtothe valueofWOL(WakeOnLAN)trans. Reception of a specific network packet is one of the requirements forthedevicetorecoverfromsleepmode. Whenthenumberofnetworkprotocolssupportedbythedevice increases,thetypesofnetworkpacketswhichactivaterecovery fromsleepmodevary.However,thereisapossibilitythatthe existingnetworkprotocolisactuallyused. Selectthetypeofnetworkpacketwhichactivatesrecoveryfrom sleepmodeaccordingtotheenvironmentwherethedeviceis used. Whenselectingprotocolforsleeprecovery 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to3 1:WSDandSNMP,2:WSDandCPCA,3:CPCAandSNMP
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PROXYRES Lv.2 Details
SettingofDNStransferpriority Tosetpriorityorderoftheprotocol(IPv4/IPv6)tobeusedforDNS query. InthecaseofusingbothIPv6andIPv4whiletheDNSserver supportsIPv4,ittakestimebecauseoftimeoutwhenexecuting DNSquerywithpriorityonIPv6. GivingpriorityonquerybyIPv4canshortenthetime. WhenittakestimetoexecuteDNSquerywithpriorityonIPv6 becausetheDNSserversupportsIPv4 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:IPv4,1:IPv6
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 802XTOUT Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-296
8
COPIER>OPTION>NETWORK
IKERETRY Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SPDALDEL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-297
COPIER>OPTION>NETWORK
NCONF-SW Lv.1 Details ON/OFF of Network Configurator function To set ON/OFF of Network Configurator function. Iftheuserdoesnotusethefunction,selectOFFtopreventremote attackthroughnetwork. Uponusersrequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
IKEINTVL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Network Configurator function is a function to be used for communicationwithNetSpotDeviceInstaller,etc.,andthe networksettingcanbechangedfromtheremote. SettingofIKEretryinterval Tosetretryintervalinthecaseofnoresponsefromthe communicationtargetatthetimeofIKEpackettransmission. Uponusersrequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to10 second 5
IKE:InternetKeyExchange
8-297
8
COPIER>OPTION>NETWORK
IPSDEBLV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SP-LINK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange SettingofIPSecdebuglevel ForR&Duse
8-298
COPIER>OPTION>NETWORK
AFS-JOB Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AFC-JOB Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AFC-EVNT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SetofFAXserverjobreceptionport Tosetthereceptionportofthefaxservertowhichafaxclient sendsjobs. Whenchangingthejobreceptionportofthefaxserver 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535
20317 COPIER>OPTION>NETWORK>AFC-JOB,AFC-EVNT
Modesettingat1Wsleep Switchtoexecute10base-Tstandbyasdefaulttorealizethe standbypower1Winsleepmode. Whenshiftingtosleepmodeafternegotiation(sameas conventionalmachines) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Shifttosleepmodewith10base-T 1:Shifttosleepmodeafternegotiation
20317 COPIER>OPTION>NETWORK>AFS-JOB,AFC-EVNT
SetofFAXclienteventreceptionport To set the event notification reception port of a fax client. When changing the event notification reception port of a fax client 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535
29400 COPIER>OPTION>NETWORK>AFS-JOB,AFC-JOB
8-298
8
COPIER>OPTION>NETWORK
ILOGMODE Lv.1 Details
8-299
COPIER>OPTION>NETWORK
IPTBROAD Lv.1 Details Settoallowbroad/multicastTX Tosetwhethertopermittransmissionofbroadcastpacketsand multicastpackets. Transmissionofbroadcastpacketsandmulticastpacketsis permittedwithoutspecifyinganexceptionaddress.Itispermitted withinthedeviceevenifitisrejectedinthedefaultsettingofthe IPv4/v6 transmission filter. Set1:Disabledwhentheuserdoesnotwanttosendthem. Uponusersrequest Enterthesettingvalue,andthenpressOKkey. 0to5 0:Enabled,1:Disabled,2to5:Notused
SettingofIPaddressblockmode TosetallprotocolsorTCP/UDP/ICMPunicastasthetargetofIP block. When0isset,themachinerespondstoARP,ICMPmulticastand broadcastwhichhavenodirectrelation,andconsequentlythe numberoflogsisincreased. When 1 is set, the machine filters TCP, UDP and ICMP unicast only. Uponusersrequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:Allprotocolssupportmode 1:TCP/UDP/ICMPunicastsupportmode 2,3:Notused
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PFWFTPRT Lv.1 Details
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ILOGKEEP Lv.1 Details
SetofIPaddressblocklogholdtime TosettheretentiontimefromthelogtimeofIPblock. WhenaccessismadeagainfromasameIPaddresswhichwas blockedbefore,ifitiswithintheretentiontimeofthepreviouslog, itslogisnotrecorded. IfaccessisfrequentlymadefromasameIPaddress,thelog record of the UI might be filled with its logs. If the user considers thatasinglelogforasameIPaddressisenough,setthelonger retentiontime. Uponusersrequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to48 0:1minute(specialmode) 1to48:1hourto48hours
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Set of RST reply at IP filter FTP SEND When FTP SEND is executed using an IP filter by which packets from a specific remote PC are rejected, SYN is returned to the port113ifthePCsupportsauthenticationoftheFTPport113. However, since the IP filter blocks the packets, the block logs are increasedandtheperformanceislowered. When1isset,RSTisreturnedtotheport113withoutblocking packets. WhenexecutingFTPSENDagainsttheOSwhichsupports authentication of the FTP port 113 while the IP filter is enabled 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
T-8-49
8-299
8
SOUND
COPIER>OPTION>SOUND
DRM-RTIM Lv.2 Details
8-300 ENV-SET
COPIER>OPTION>ENV-SET
ENVP-INT Lv.1 Details Temp,humid&FixFilmtemploggetcycle Tosetthecycletoobtainlogofthetemperatureandhumidity insidethemachineandthesurfacetemperatureoftheFixingFilm. Asthevalueisincrementedby1,thecycleisincreasedby1 minute. Obtainedlogcanbedisplayedbyselectingthefollowing:COPIER >DISPLAY>ENVRNT Attroubleanalysis 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to480 1minute 60 COPIER>DISPLAY>ENVRNT
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setexeintervaldrumlineprevsequence TosetthetimeintervaltorotatethePhotosensitiveDrumat standbyorsleepmode. Whenadeviceisleftforalongperiodoftime,adrumpitchline occurs.Topreventthis,rotatethePhotosensitiveDrumatthe specified interval for 300 msec only. Asthevalueisincrementedby1,theintervalisextendedby5 minutes. Ifusersdonotcareaboutthedrumpitchlineortheywantto reducetherotationinterval,increasethevalue. Extendtheintervalfortheuserswhodonotcareaboutthedrum pitchlineafterthemachineisleftorwhowanttoreducethe numberofstart-up. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to12 0:Notexecuted 5minutes 3
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DRY-CISU Lv.1 Details
T-8-50
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
ON/OFFofcondensationpreventionmode TosetON/OFFofcondensationmode. WhendropletsareappearedontheScannerUnitdueto condensationandimagefailureorE225occurs,set"1:ON". Byselecting1,theScannerUnit(paperfront)stopsthefanfor 15secondsandtheScannerUnit(paperback)lightsLEDfor30 secondsfromthenextstartup. WhendropletsareappearedontheScannerUnitdueto condensationandimagefailureorE225occurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF(Normalmode),1:ON(Anti-condensationmode)
T-8-51
8-300
8
CLEANING
COPIER>OPTION>CLEANING
OHP-PTH Lv.2 Details
8-301
COPIER>OPTION>CLEANING
Lv.1 Details TosetthepaperintervaltoexecutetheITBcleaning. Asthevalueisincreased,downtimeandtonerconsumption amountarereducedwhileanimagefailuremayoccurdueto soiledITB. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to10 0:Notexecuted 100sheets 1
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ITBB-TMG
SetofITBcleantranspthresholdvalue TosetthenumberofsheetsforITBcleaningintervaltobe executedwhenfeedingtransparency. Whenalargenumberoftransparenciesisfed,surfaceactive agent adheres to the ITB, and consequently the transfer efficiency islowered.Topreventtheimagefailure,patchesarecreatedon theITBandsurfaceactiveagentisremovedtogetherwiththe tonerper30sheetsatpaperintervalandper22sheetsatlast rotation. Asthevalueisincrementedby1,thenumberofsheetsfor cleaningintervalatpaperintervalandatlastrotationisincreased by1sheet. Whenusingthetransparencythattendstocausetheadherenceof surfaceactiveagent,decreasethevaluesothattheimagefailure canbealleviated. Whenthevalueisincreased,thedowntimeandthetoner consumptioncanbereduced;however,imagefailuremayoccur. Whenanimagefailureoccursduetoloweringofthetransfer efficiency 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -15to15 Numberofsheets 0 COPIER>FUNCTION>CLEANING>TBLT-CLN
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
T-8-52
SettingofITBcleaningsheetinterval
8-301
8
FEED-SW
COPIER>OPTION>FEED-SW
PRNT-ORD Lv.2 Details
8-302
COPIER>OPTION>FEED-SW
EVLP-FS Lv.2 Details Setting of fixing speed with envelop To set fixing speed when feeding envelop. As the value is incremented by 1, the fixing speed changes by 0.1%. Decreasethevaluewhenthinlinedisplacementoccursontrailing edgeofenvelop,andincreasethevaluewhenwrinklesoccur. Whenthinlinedisplacementorwrinklesoccurontrailingedge whilefeedingenvelop Enterthesettingvalue,andthenpressOKkey. Besuretochangethevaluelittleatatimebecausewhensetting anextremevalue,phenomenonoppositetothinlinedisplacement orwrinklesoccur. -20to20 0.1% 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo EVLP-SPD Lv.1 Details
Settingofdeliverymode Tosetthedeliverymode. Set"0:Straightdelivery"tomakestraightdeliveryatFCOTpriority. Selecteither"0:Straightdelivery"or"1:Reversedelivery" (accordingtomedia)whenastackingfailureoccursduetouneven glossorcurl. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Straightdelivery,1:Reversedelivery,2:Notused
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settingofenvelopefeedspeed Whenfeedingtheenvelopeinnormalspeed(1/2speed),the gluedpartonenvelopemayadheretotheFixingFilm/Pressure Roller. Usethesamespeed(1/1speed)andsameimageformation processingastheplainpaperforenvelopesothatadherencecan bereduced. Thisitemistosetwhethertofeedtheenvelopein1/2speedor 1/1speed. WhenthegluedpartofenvelopeadherestotheFixingFilm/ PressureRoller 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:1/2speed,1:1/1speed
T-8-53
8-302
8
IMG-SPD
COPIER>OPTION>IMG-SPD
FX-D-TMP Lv.1 Details
8-303
COPIER>OPTION>IMG-SPD
MXSPDSEL Lv.1 Details SPD/Q'typriorityinmixedwidth:Reader Tosetwhethertogiveprioritytospeedorimagequalitywhen feedingthepaperwithdifferentwidth. When0:Speedpriorityisset,theproductivitydoesnotreduce whileskewmayoccuratdifferentwidthmixedprint. When1:Imagequalitypriorityisset,idlerotationisperformed atdifferentwidthmixedprintandthenumberofregistrationis increasedsothattheimagequalitycanbemaintainedwhilethe productivityisreduced. Whenskewoccursatdifferentwidthmixedprint 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ForoutsideJapanonly 0to1 0:Imagequalitypriority,1:Speedpriority
Setsmallpprdownsequencestarttemp Tosetthetemperaturetostartthedownsequencecontrolforthe smallsizepaper(smallerthanA4Rinwidthdirection). Asthevalueisincrementedby1,thetemperatureisincreasedby 5degCfromtheinitialsettingtemperature. Whenimprovingthehotoffsetandtheproductivityatthepaper edge 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -4to4 -4:-20degC,-3:-15degC,-2:-10degC,-1:-5degC,0:0degC, 1:5degC,2:10degC,3:15degC,4:20degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FIX-ROT Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Idlerotnendtempaftersmallpprfeed Whenfeedingthesmallsizepaperfollowingthelargesizepaper ontheFixingAssembly,thetemperatureatbothedgesofFixing Film is higher than the center. To prevent the fixing offset or paper wrinkle, it idles until the temperature becomes the specified value afterthesmallsizepaperisfed. This item is to set the temperature to finish the idle rotation. Asthevalueisincrementedby1,thetemperatureisincreasedby 5degCfromtheinitialsettingvalue. ThetemperatureisdetectedbytheSubThermistor1and2. Whenimprovingthehotoffsetandtheproductivityatthepaper edge 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
T-8-54
8-303
8
IMG-SPD
COPIER>OPTION>IMG-RDR
DFDST-L1 Lv.1 Details
8-304
COPIER>OPTION>IMG-RDR
DFDST-L2 Lv.1 Details DADFmodedustdtctleveladj:afterjob Toadjustdustdetectionlevelwithdustdetectioncorrectioncontrol thatisexecutedafterthejobiscompletedinDADFmode. Reducethevalueinthecaseoffrequentdisplayofcleaning instructionatthetimeofdustdetection.Asthevalueissmaller, thedustislessdetected. Increasethevalueinthecaseofblacklines.Asthevalueislarger, thesmalldustismorelikelydetected. -Whenblacklineoccursduetodust -Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenincreasingthevaluetoomuch,thecleaninginstruction screenmayappeartoooftensinceevensmalldustthatwillnotbe appearedontheimagecanbedetected. Whenreducingthevaluetoomuch,blacklinesmayappearonthe image. 0to255 0:OFF
DADFmodedustdtctleveladj:pprintvl Toadjustdustdetectionlevelwithdustdetectioncorrectioncontrol thatisexecutedatpaperintervalinDADFmode. Reducethevalueinthecaseoffrequentdisplayofcleaning instructionatthetimeofdustdetection.Asthevalueissmaller, thedustislessdetected. Increasethevalueinthecaseofblacklines.Asthevalueislarger, thesmalldustismorelikelydetected. -Whenblacklineoccursduetodust -Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenincreasingthevaluetoomuch,thecleaninginstruction screenmayappeartoooftensinceevensmalldustthatwillnotbe appearedontheimagecanbedetected. Whenreducingthevaluetoomuch,blacklinesmayappearonthe image. 0to255 0:OFF
8-304
8
COPIER>OPTION>IMG-RDR
DF2DSTL1 Lv.1 Details
8-305
COPIER>OPTION>IMG-RDR
DF2DSTL2 Lv.1 Details AdjDADFdustdtctlevelatjobend:bck Toadjustdustdetectionlevelwithdustdetectioncorrectioncontrol thatisexecutedbytheScannerUnit(paperback)afterthejobis completedinDADFmode. Reducethevalueinthecaseoffrequentdisplayofcleaning instructionatthetimeofdustdetection.Asthevalueissmaller, thedustislessdetected. Increasethevalueinthecaseofblacklines.Asthevalueislarger, thesmalldustismorelikelydetected. -Whenblacklineoccursduetodust -Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenincreasingthevaluetoomuch,thecleaninginstruction screenmayappeartoooftensinceevensmalldustthatwillnotbe appearedontheimagecanbedetected. Whenreducingthevaluetoomuch,blacklinesmayappearonthe image. 1to255
DADFdustdtctlvladjatpprintvl:bck Toadjustdustdetectionlevelwithdustdetectioncorrectioncontrol thatisexecutedatpaperintervalbytheScannerUnit(paperback) inDADFmode. Reducethevalueinthecaseoffrequentdisplayofcleaning instructionatthetimeofdustdetection.Asthevalueissmaller, thedustislessdetected. Increasethevalueinthecaseofblacklines.Asthevalueislarger, thesmalldustismorelikelydetected. -Whenblacklineoccursduetodust -Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenincreasingthevaluetoomuch,thecleaninginstruction screenmayappeartoooftensinceevensmalldustthatwillnotbe appearedontheimagecanbedetected. Whenreducingthevaluetoomuch,blacklinesmayappearonthe image. 1to255
200
200
Blacklinescanappearontheimageifthereisdust.Withdustdetectioncorrectioncontrol,theimageiscorrectedtopreventblack linesoncedustisdetected.
T-8-55
8-305
8
IMG-MCON
COPIER>OPTION>IMG-MCON
PASCAL Lv.1 Details
8-306
COPIER>OPTION>IMG-MCON
TMC-SLCT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setting of error diffusion coefficient To set coefficient to be used for error diffusion process. Specifyaccordingtothelevelofgranularityanddotstability. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0:Smallgranularity/lowdotstability 1:Smallgranularity/lowdotstability(colormode),Large granularity/highdotstability(B&Wmode) 2:Largegranularity/highdotstability
Use/nouseofautogradationadjdata Tosettouse/nottousethegradationadjustmentdatagamma LUTthatisgeneratedbyautogradationadjustment(Full/Quick Adjust)control. SelectionisavailableastowhethertousegammaLUTatthetime ofimageformation. WhenPASCAL-relatedfailureoccurs/whenidentifyingthecause ofPASCAL-relatedfailure 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:InitialLUTisused.(Automaticgradationadjustmentisnot used.) 1:Autogradationadjustmentisused. 2to3:Notused
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SCR-SLCT Lv.2 Details
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PRN-FLG Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
HalftoneprocessinPhotoPrintoutmode Tosethalftoneprocess(errordiffusion,screen2types)inPhoto Printoutmodewhenmakingacopy. Changethesettingifthecopyimagehasaproblemwiththeinitial setting(Lowscreenruling). Select0(errordiffusion)inthecaseofmoire(suitablefor characterreproduction). Select2(Highscreenruling)inthecaseofroughdots. Whenmoireimageorroughdotsoccursoncopyimage 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Errordiffusion,1:Lowscreenruling,2:Highscreenruling
Usecase
Select of image area flag (PDL image) To set the image area flag for the image processing which isperformedwhenaPDLimagefailstobecompressedata specified compression rate. If an image fails to be compressed at a specified compression rate,thefollowingoperationsareperformedasdefault: -Processingtoprioritizereproductionoftext -ReplacingBkcolortoblackplaincolor Set 1 when moire occurs or jaggy is significant. Set2whennotpreferringtoreplaceBkcolorwithblackplain color. - When moire occurs or jaggy is significant in case of printing an imagecontainingmanyhalftonedotsorphotos -WhenavoidingtoreplaceBkcolorwithblackplaincolor 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thissettingtradesoffwithreproducibilityoftext. 0to2 0:Highscreenruling,graycompensationLUT 1:Errordiffusion,graycompensationLUT 2:Highscreenruling,normalLUT
FunctionSettings>Copy>PhotoPrintoutMode
8-306
8
COPIER>OPTION>IMG-MCON
SCN-FLG Lv.2 Details
8-307
COPIER>OPTION>IMG-MCON
TMIC-BK Lv.2 Details ON/OFFofTMICBk_LUTendedgecorrect TosetON/OFFofthetrailingedgeadjustmentofBk_LUTforPDL andforcopywhichareusedbyTMIC. WhenthetrailingedgeadjustmentissettoON,thedensityofthe highdensityareabecomeshigh,andconsequentlytextandthin linesbecomeclear.Whileanimagebecomesclear,thehueofthe gradationareaofphotos,etc.ischanged. Whenthinlinesarepartlymissingorcharactersarefaded 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:ONforPDL,OFFforcopy 1:OFFforPDL,OFFforcopy 2:ONforPDL,ONforcopy 3:OFFforPDL,ONforcopy
Select of image area flag (copy image) To set the image area flag for the image processing which is performedwhenascannedimagefailstobecompressedata specified compression rate. If an image fails to be compressed at a specified compression rate,processingtoprioritizereproductionoftextisperformedby default. Set1whenanimagecontainsmanyhalftonephotos. Set2whenanimagecontainsmanyprintedphotos. Whencopyinganimagewhichcontainsmanyhalftonedotsand photos 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thissettingtradesoffwithreproducibilityoftext. 0to2 0:Text 1:Halftonephotoimage 2:Printedphoto
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DH-MODE Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-307
8
COPIER>OPTION>IMG-MCON
DH-TMG Lv.2 Details
8-308
COPIER>OPTION>IMG-MCON
REPORT-Z Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setofreportprintimageprocessing Tosettheimageprocessingwhichisperformedwhenprintinga report. Whenthereisarequestforimageimprovement 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:EquivalenttoPDLtextmode(Blacktextisreproducedwith4 colors.Errordiffusedimage.Thehueofthephotoareaismore vividthan2.) 1:EquivalenttoPDLphotomode(Blacktextisreproducedwith4 colors.Screenprocessedimage.) 2:Equivalenttoscannedtextmode(Blacktextisreproducedwith blackplaincolor.Errordiffusedimage.Thehueofthephotoarea mightbedifferentfrom0.) 3:Equivalenttoscannedphotomode(Blacktextisreproduced withblackplaincolor.Screenprocessedimage.)
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MIX-FLG Lv.2 Details
SetofautoD-halfcontrolexeinterval TosetthepaperintervaltoexecuteautoD-halfcontrol. D-halfcontrolisexecutedatthetimeoflastrotationafter completion of job with specified number of sheets. Thisitemisenabledwhen"1:ON"issetinCOPIER>OPTION> FNC-SW>DH-SW. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 500to2000 1sheet 1000 COPIER>OPTION>FNC-SW>DH-SW
Setimagecompositionimageprocessing Tosettheimageprocessingwhichisperformedwhenanimage fails to be compressed at a specified compression rate by the MainControlleruponimagecomposition. Whenanimageprocessingfailureoccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:EquivalenttoPDLtextmode(Blacktextisreproducedwith4 colors.Errordiffusedimage.Thehueofthephotoareaismore vividthan2.) 1:EquivalenttoPDLphotomode(Blacktextisreproducedwith4 colors.Screenprocessedimage.) 2:Equivalenttoscannedtextmode(Blacktextisreproducedwith blackplaincolor.Errordiffusedimage.Thehueofthephotoarea mightbedifferentfrom0.) 3:Equivalenttoscannedphotomode(Blacktextisreproduced withblackplaincolor.Screenprocessedimage.)
8-308
8
COPIER>OPTION>IMG-MCON
IFXEML-Z Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-309
COPIER>OPTION>IMG-MCON
BMLNKS-Z Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange SetBMLinkSreceptionprintimgprocess Tosettheimageprocessingwhichisperformedwhenprinting receivedBMLinkS. Whenthereisarequestforimageimprovement 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:EquivalenttoPDLtextmode(Blacktextisreproducedwith4 colors.Errordiffusedimage.Thehueofthephotoareaismore vividthan2.) 1:EquivalenttoPDLphotomode(Blacktextisreproducedwith4 colors.Screenprocessedimage.) 2:Equivalenttoscannedtextmode(Blacktextisreproducedwith blackplaincolor.Errordiffusedimage.Thehueofthephotoarea mightbedifferentfrom0.) 3:Equivalenttoscannedphotomode(Blacktextisreproduced withblackplaincolor.Screenprocessedimage.)
SetclriFAX,mailrecvprintimgprocess Tosettheimageprocessingwhichisperformedwhenprinting coloriFAXorreceivedmail. Whenthereisarequestforimageimprovement 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 0:EquivalenttoPDLtextmode(Blacktextisreproducedwith4 colors.Errordiffusedimage.Thehueofthephotoareaismore vividthan2.) 1:EquivalenttoPDLphotomode(Blacktextisreproducedwith4 colors.Screenprocessedimage.) 2:Equivalenttoscannedtextmode(Blacktextisreproducedwith blackplaincolor.Errordiffusedimage.Thehueofthephotoarea mightbedifferentfrom0.) 3:Equivalenttoscannedphotomode(Blacktextisreproduced withblackplaincolor.Screenprocessedimage.)
BMLinkS(BusinessMachineLinkageService):Anintegrated networkOAdeviceinterface
8-309
8
COPIER>OPTION>IMG-MCON
REDU-CNT Lv.2 Details
8-310
COPIER>OPTION>IMG-MCON
VP-ART Lv.2 Details Settingoflineartprocessing Tomakeasettingforoutlineprocessingforlineartonscalable PDF. Intheoutlineprocessing,abinaryimageoutlineisextractedinthe field which is recognized as line art, and is converted into vector data. Specifywhethertoconvertthebinaryimageoutlineintovector dataortorecognizeitasoneline(asathinline).Forthethinline, the line width can be specified. Changethisvaluewhenyouwanttoobtainanoutputofawidewidthlineasonelineratherthanasanoutline(whenyouwantto prioritizeeditoperationasalineratherthanimagequality). Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to99
Display/adj/setrange
Settonerdepositamountlimtatclradj Tosetwhethertolimitthetonerdepositamountatcolor adjustment (color balance, fine adjustment of density). When 1 is set, the color adjustment value is reflected to an image precisely,buttonerscatteringintheTransferAssemblyandFixing Assemblymightoccur,andpapermightwindaroundtheFixing Assembly. WhenCOPIER>OPTION>DSPLY-SW>IMGC-ADJissetto1, thissettingcanbealsomadeintheusermode. -Uponuser'srequest - When reflecting the color adjustment value to an image precisely 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. When1isset,tonerscatteringintheTransferAssemblyand FixingAssemblymightoccur,andpapermightwindaroundthe FixingAssembly. 0to1 0: Toner deposit amount is limited to the specified amount. 1:Tonerdepositamountisnotlimited.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-310
8
COPIER>OPTION>IMG-MCON
VP-TXT Lv.2 Details
8-311
P-ALPHA Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PASCL-TY Lv.2 Details
Settingofcharactervectorization Tomakeasettingofvectorconversionprocessingfortexton scalablePDF. Inthevectorconversionprocessing,abinaryimageoutlineis extracted in the field which is recognized as text, and is converted intovectordata. Inregularvectorconversion,functionapproximationisnotused forsmalltextbecausetheimagequalityisnotchanged. Whenthevalueischanged,functionapproximationprocessingis executedforsmalltext,whichrealizessmoothtextalthoughthe imagequalityischanged. Changethisvaluewhenyouwanttoprioritizesmoothnessin smalltext. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to99
COPIER>OPTION>IMG-MCON AdjustmentofPatchSensoralphavalue To adjust the correction coefficient alpha value of the Patch Sensor. Thevaluemultipliedby1000isdisplayedonthescreen. WhenreplacingthePatchSensor,enterthevalueofservice label. WhenthePatchSensorfailstoreadthedensity 1)Enterthesettingvalue. 2)TurnOFF/ONthemainpowerswitch.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AST-SEL Lv.2 Details
512to2047 1200
COPIER>FUNCTION>MISC-P>PT-LPADJ
Papersettingforautogradationadj Autogradationadjustmentisnormallyexecutedwiththe recommended paper specified for each location. However, if you wanttochangethepapertype,usethissettingtochangethe papertype. Whenexecutingtheautogradationadjustmentusingapaper otherthantherecommendedpapertype 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotchangethesettinginthenormaloperation. 1to3 1:CS-814(ExceptforUSAandEU.MainlyforJapan) 2:Hammermill(ForUSA) 3:Mondi(ForEU)
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjofadvancedsmoothingeffect Toadjustthesmoothingeffectwhichissetintheadvanced smoothingUI. Set3ifnosmoothingeffectisobtainedeventhoughStrongisset intheadvancedsmoothingUI. Set0iftoomucheffectisobtainedeventhoughWeakissetinthe advancedsmoothingUI. Whenimagefailures(jaggy,moire)occur 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3
AST:AdvancedSmoothingTechnology
Thevaluediffersaccordingtothelocation.
8-311
8
COPIER>OPTION>IMG-MCON
REGM-SEL Lv.2 Details
8-312
COPIER>OPTION>IMG-MCON
ERS-SEL1 Lv.1 Details Set1200dpiERSprocess:PSExpnsnKit TochangetheERSprocessingwhenthehueofpatterned graphicsischangedaccordingtophaseinthecaseofmaking 1200-dpioutputwiththePSExpansionKitinstalled. Theprocessingischangedonlyforgraphicsandimages,and ERSweightingprocessingisperformedtocharactersevenifthe settingischanged. Set1whentheaforementionedsymptomoccurs. Set3iftheproportionofsmallcharactersisdistortedafter1isset. Set5ifthecolorofgraphicsisnotstabilizedafter1or3isset.In thissetting,however,athinlineofasinglelinedisappears. Whenthehueischangedaccordingtophasewhenmaking 1200-dpioutput 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to7 Thefollowingprocessingareperformedtographicsandimages respectively: 0:Maxskipping,simpleskipping 1:ERS(average),simpleskipping 2:ERS(average),ERS(average) 3:ERS(weighting),simpleskipping 4:ERS(weighting),ERS(weighting) 5:Simpleskipping,simpleskipping 6,7:Notused 0 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SCR-SW Lv.1 Details
Adj of fine-line density correction Toadjustthelineandtextdensitywhichissetinthethinline densityadjustmentUI. Set4ifdensityistooloweventhough+2issetinthethinline densityadjustmentUI. Set0ifdensityistoohigheventhough-2issetinthethinline densityadjustmentUI. Whenlineandtextadjustedbythinlinedensityadjustmentistoo darkortoolightinthecaseof1200dpiprint 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to4
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
REGM-SEL:REosGaMmaSELect Setoflowscreenrulingdither Tosettheditheringmethodforlowscreenruling. When changing the value, confirm the change by setting "1: Low screenruling"inCOPIER>TEST>PG>TXPH. Uponuser'srequest(Dotditheringisused) 1)Enterthesettingvalue,andthenpressOKkey. 2)ExecuteAutoAdjustGradation(FullAdjust). 0to1 0:Linedithering,1:Dotdithering
0 COPIER>TEST>PG>TXPH
8-312
8
COPIER>OPTION>IMG-MCON
ERS-SEL2 Lv.1 Details
8-313 IMG-LSR
COPIER>OPTION>IMG-LSR
ARC-INT1 Lv.2 Details SetofARCDATinterruptioninterval TosetthenumberofsheetsastheintervalsatwhichARCDAT controlisexecuted. When the number of sheets reaches the specified value, ARCDAT controlisexecutedbyinterruptinganongoingjob. Ifthevalueistoolarge,thedensityofimagebecomesdifferent beforeandaftertheinterruption. Ifthevalueistoosmall,theproductivityislowered. Actualsettingvalueiscalculatedbydividingtheentryvalueby0.9 androundingupafterthedecimalpoints.(e.g.:Ifanentryvalueis 100,settingvaluewillbe112.) Enterthesettingvalue,andthenpressOKkey. 5to1000 1sheet 100 0 COPIER>OPTION>IMG-LSR>ARC-INT2
Set1200dpiERSprocess:printserver TochangetheERSprocessingwhenthehueofpatterned graphicsischangedaccordingtophaseinthecaseofmaking 1200-dpioutputthroughconnectiontotheprintserver. Set1whentheaforementionedsymptomoccurs. Set3iftheproportionofsmallcharactersisdistortedafter1isset. Set5ifthecolorofgraphicsisnotstabilizedafter1or3isset.In thissetting,however,athinlineofasinglelinedisappears. Whenthehueischangedaccordingtophasewhenmaking 1200-dpioutput 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 Thefollowingprocessingareperformedtocharacters,graphics, andimagesrespectively: 0:ERS(weighting),Maxskipping,simpleskipping 1:ERS(average),ERS(average),simpleskipping 2:ERS(average),ERS(average),ERS(average) 3:ERS(weighting),ERS(weighting),simpleskipping 4:ERS(weighting),ERS(weighting),ERS(weighting) 5:ERS(weighting),simpleskipping,simpleskipping 0 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ARC-INT2 Lv.2 Details
SetARCDATexeinterval:lastrotation TosetthenumberofsheetswhichARCDATcontrolisnot executed,fromthestartofajob. ARCDATcontrolwhichissupposedtobeexecutedduringthe specified number of sheets is executed at last rotation of the previousjob.Sincethenumberofinterruptionsduringajobis reduced,theproductivityisenhanced. However,thenumberoftimesofARCDATcontrolexecutedatlast rotationmightbeincreaseddependingontheprintconditions. Actualsettingvalueiscalculatedbydividingtheentryvalueby0.9 androundingupafterthedecimalpoints.(e.g.:Ifanentryvalueis 25,settingvaluewillbe28.) Enterthesettingvalue,andthenpressOKkey. 5to1000 1sheet 25 0 COPIER>OPTION>IMG-LSR>ARC-INT1
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
T-8-56
8-313
8
IMG-DEV
COPIER>OPTION>IMG-DEV
DEVL-VTH Lv.2 Details
8-314
COPIER>OPTION>IMG-DEV
DVTGT-K Lv.2 Details SetATRSensr(Bk)gainvalueoffset ToactuallycorrecttheT/Dratiobysettingtheoffsettothe gainvalueofATRSensor(Bk). Asthevalueisincreased(increasingtheT/Dratio),thescrew pitchunevennessisalleviated;however,foggingmayoccur. Ifthevalueischanged,thetargetvalueforT/Dratioisalso changedsothatthetonerejectionsequenceneedstobe forciblyexecutedtostabilizetheT/Dratio. Thevaluereturnsto0whentheProcessUnitisreplaced. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthevalueischanged,executethetonerejection sequence. -3to3
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INTPPR-1 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettonerejectnimagedutythresholdVL Tosetthethresholdvalueoftheimageduty,whichisthe conditiontoperformthelowdutytonerejectionsequence. Asthevalueislarger,coarsenessisdecreased,but productivityisloweredandtonerconsumptionisincreased. Asthevalueissmaller,productivityandtonerconsumption areimproved,butcoarsenessisworsened. Whenprintinglowduty(lowimageratio)images, -graininess(coarseness)occurs -lowproductivityorhightonerconsumptionispointedoutby theuser 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. -1to2 -1:-1%,0:0%,1:+1%,2:+2%
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DVTGT-Y Lv.2 Details
0 COPIER>OPTION>IMG-DEV>DEVL-PTH
SetATRSensr(Y)gainvalueoffset ToactuallycorrecttheT/Dratiobysettingtheoffsettothe gainvalueofATRSensor(Y). Asthevalueisincreased(increasingtheT/Dratio),thescrew pitchunevennessisalleviated;however,foggingmayoccur. Ifthevalueischanged,thetargetvalueforT/Dratioisalso changedsothatthetonerejectionsequenceneedstobe forciblyexecutedtostabilizetheT/Dratio. Thevaluereturnsto0whentheProcessUnitisreplaced. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthevalueischanged,executethetonerejection sequence. -3to3
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-314
8
COPIER>OPTION>IMG-DEV
DVTGT-M Lv.2 Details
8-315
COPIER>OPTION>IMG-DEV
DEVL-PTH Lv.1 Details SetsheetthresholdVLoftonerejection Tosetthethresholdvalueforthenumberofsheets,whichis theconditiontoperformthelowdutytonerejectionsequence. Asthevalueislarger,coarsenessisdecreased,but productivityisloweredandtonerconsumptionisincreased. Asthevalueissmaller,productivityandtonerconsumption areenhanced,butcoarsenessisworsened. Whileprintinglowduty(lowimageratio)images, -graininess(coarseness)occurs -lowproductivityorhightonerconsumptionispointedoutby theuser 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethiswhenthemachineisoperatingcorrectly. 0to2 0:52sheets,1:100sheets,2:200sheets
SetATRSensr(M)gainvalueoffset ToactuallycorrecttheT/Dratiobysettingtheoffsettothe gainvalueofATRSensor(M). Asthevalueisincreased(increasingtheT/Dratio),thescrew pitchunevennessisalleviated;however,foggingmayoccur. Ifthevalueischanged,thetargetvalueforT/Dratioisalso changedsothatthetonerejectionsequenceneedstobe forciblyexecutedtostabilizetheT/Dratio. Thevaluereturnsto0whentheProcessUnitisreplaced. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthevalueischanged,executethetonerejection sequence. -3to3
Usecase
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DVTGT-C Lv.2 Details
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AUTO-DH Lv.1 Details
0 COPIER>OPTION>IMG-DEV>DEVL-VTH
SetATRSensr(C)gainvalueoffset ToactuallycorrecttheT/Dratiobysettingtheoffsettothe gainvalueofATRSensor(C). Asthevalueisincreased(increasingtheT/Dratio),thescrew pitchunevennessisalleviated;however,foggingmayoccur. Ifthevalueischanged,thetargetvalueforT/Dratioisalso changedsothatthetonerejectionsequenceneedstobe forciblyexecutedtostabilizetheT/Dratio. Thevaluereturnsto0whentheProcessUnitisreplaced. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Whenthevalueischanged,executethetonerejection sequence. -3to3
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-315
8
COPIER>OPTION>IMG-DEV
PCHINT-1 Lv.2 Details
8-316
COPIER>OPTION>IMG-DEV
DELV-THY Lv.2 Details SetofYtonerejectionexeimageratio Tosetthethresholdvalueofaverageimageratiotoexecute Ytonerejection. Asthevalueisincrementedby1,theratioisincreasedby 1%. Increasethevaluewhenfoggingoccursatalargevolume printingoflowdutyimage. Decreasethevaluewhenuserscareabouttheamountof wastetonercomparedtothelowdutyimageoutput. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:0%,1:1%,2:2%,3:3%,4:4%,5:5%
ATRpatchpprintervaladj(1stlimit) Toadjustthepaperintervalwhichpatchdetectionis performedbyATRcontrol.(1stlimit) If the hue variation is significant, decrease the value. Toreducethedowntime,increasethevalue. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PCHINT-V Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DELV-THC Lv.2 Details
AdjATRpatchVDcountertotalVLintvl Toadjusttheintervalofthetotalvideocountervaluewhich patchdetectionisperformedbyATRcontrol. If the hue variation is significant, decrease the value. Toreducethedowntime,increasethevalue. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
2 Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetofCtonerejectionexeimageratio Tosetthethresholdvalueofaverageimageratiotoexecute Ctonerejection. Asthevalueisincrementedby1,theratioisincreasedby 1%. Increasethevaluewhenfoggingoccursatalargevolume printingoflowdutyimage. Decreasethevaluewhenuserscareabouttheamountof wastetonercomparedtothelowdutyimageoutput. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:0%,1:1%,2:2%,3:3%,4:4%,5:5%
8-316
8
COPIER>OPTION>IMG-DEV
DELV-THM Lv.2 Details
8-317
COPIER>OPTION>IMG-DEV
ADJ-VPP Lv.2 Details AdjofdevelopingACbiasVpp ToadjustVppofthedevelopingACbias. Ringmarksarealleviatedwhenthevalueisdecreasedinthe -direction,andwhitespotsarealleviatedwhenthevalueis increasedinthe+direction. Whenimagefailures(ringmarks,whitespots)occur 1)Enterthesettingvalue(switchnegative/positiveby-/+key) andpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)ExecuteAutoAdjustGradation>FullAdjust. Whenthevalueisdecreasedtoomuchinthe-direction, densitymightbelowered. -2to0
SetofMtonerejectionexeimageratio Tosetthethresholdvalueofaverageimageratiotoexecute Mtonerejection. Asthevalueisincrementedby1,theratioisincreasedby 1%. Increasethevaluewhenfoggingoccursatalargevolume printingoflowdutyimage. Decreasethevaluewhenuserscareabouttheamountof wastetonercomparedtothelowdutyimageoutput. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:0%,1:1%,2:2%,3:3%,4:4%,5:5%
Usecase Adj/set/operatemethod
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DELV-THK Lv.2 Details
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PAP-W-EN Lv.1 Details
-1
SetofBktonerejectionexeimageratio Tosetthethresholdvalueofaverageimageratiotoexecute Bktonerejection. Asthevalueisincrementedby1,theratioisincreasedby 1%. Increasethevaluewhenfoggingoccursatalargevolume printingoflowdutyimage. Decreasethevaluewhenuserscareabouttheamountof wastetonercomparedtothelowdutyimageoutput. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:0%,1:1%,2:2%,3:3%,4:4%,5:5%
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Solidimageunevendensreductionmode [Notused]IfdevelopertosupplytotheDevelopingCylinder isnoteven,unevendensityoccursonthesolidimage.To makedevelopereven,enlargetheimageintervaltosecure therotationtimeoftheTonerFeedScrew. Asthevalueisincreased,theimageinterval(paperinterval) iswiden. Ifunevendensityisseen,suchasdarkerleftedgeonthe solidimage,increasethevalue. Whenunevendensityoccursonsolidimage 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to10
8-317
8
COPIER>OPTION>IMG-DEV
PTN-LVL Lv.1 Details
8-318 IMG-TR
COPIER>OPTION>IMG-TR
2TR-RVON Lv.2 Details ON/OFFendedgewhitespotcrrctscrn TosetwhethertodisplaythescreentosetON/OFFofthepaper trailingedgeweakbiasinusermode. When1isset,trailingedgewhitespotcorrectionscreenis displayedinusermode.IfONissetinthisscreen,weakbiasis appliedtothepapertrailingedge,andwhitespotsatthetrailing edgearealleviated. Uponuser'srequest(whenwhitespotsoccuratthetrailingedge) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Grass-likelinelevelsetting Tochangethepotentialasacountermeasureagainstgrasslikeline. Asthevalueisincreased,thegrass-likelineisalleviated; however,tonerconsumptionincreases. Increasethevaluewhengrass-likelineoccursatHToutput ontheimageleadedge. DecreasethevalueifusersdonotoutputHTontheimage leadingedgeortheydonotcareaboutgrass-likelineand also,theywanttoreducethetonerconsumption. Whengrass-likelineoccursatimageleadingedgeHT 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -1to1
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode
T-8-57
Supplement/memo
8-318
8
IMG-FIX
COPIER>OPTION>IMG-FIX
DELV-FAN Lv.2 Details
8-319
COPIER>OPTION>IMG-FIX
DRM-RTIM Lv.2 Details Setexeintervaldrumlineprevsequence TosetthetimeintervaltorotatethePhotosensitiveDrumat standbyorsleepmode. Whenadeviceisleftforalongperiodoftime,adrumpitchline occurs.Topreventthis,rotatethePhotosensitiveDrumatthe specified interval for 300 msec only. Asthevalueisincrementedby1,theintervalisextendedby5 minutes. Ifusersdonotcareaboutthedrumpitchlineortheywantto reducetherotationinterval,increasethevalue. Extendtheintervalfortheuserswhodonotcareaboutthedrum pitchlineafterthemachineisleftorwhowanttoreducethe numberofstart-up. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to12 0:Notexecuted 5minutes 3
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FX-S-TMP Lv.1 Details
ON/OFFofcondensationpreventionmode TosetON/OFFofcondensationcontrolmode. When"1:ON"isset,internalandexternaltemperaturesare compared,andifneeded,turnONtheProcessCartridgeFan (Front)(FM10). Whencondensationoccurs 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON
Usecase
Adj/set/operatemethod 0 Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TMP-TBL2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofITOPcontroltemp:plainppr TosettheoffsetofITOPcontroltemperatureforplainpaper(64 to81g/m2)in1/1speed. Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonplainpaper 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
Setting of fixing control temp: heavy 1 To set the offset of fixing control temperature for heavy paper 1 (106to163g/m2). Asthevalueisincreasedby1,thecontroltemperatureis increasedby5degC. Increase the value when the fixing failure occurs. Decrease the value when the fixing offset occurs. When the offset or fixing failure occurs on heavy paper 1 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-10degC,0:0degC,1:+5degC,2:+10deg C 5degC 0
8-319
8
COPIER>OPTION>IMG-FIX
TMP-TBL3 Lv.1 Details
8-320
COPIER>OPTION>IMG-FIX
TMP-TBL5 Lv.1 Details Setting of fixing control temp: thin ppr To set the offset of fixing control temperature for thin paper (52 to 63g/m2). Asthevalueisincreasedby1,thecontroltemperatureis increasedby5degC. Increase the value when the fixing failure occurs. Decrease the value when the fixing offset occurs. When the offset or fixing failure occurs on thin paper 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-10degC,0:0degC,1:+5degC,2:+10deg C 5degC 0
Setting of fixing control temp: heavy 2 To set the offset of fixing control temperature for heavy paper 2 (164to209g/m2). Asthevalueisincreasedby1,thecontroltemperatureis increasedby5degC. Increase the value when the fixing failure occurs. Decrease the value when the fixing offset occurs. When the offset or fixing failure occurs on heavy paper 2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-10degC,0:0degC,1:+5degC,2:+10deg C 5degC 0
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TMP-TBL4 Lv.1 Details
Setting of fixing control temp: heavy 3 To set the offset of fixing control temperature for heavy paper 3 (210to256g/m2). Asthevalueisincreasedby1,thecontroltemperatureis increasedby5degC. Increase the value when the fixing failure occurs. Decrease the value when the fixing offset occurs. When the offset or fixing failure occurs on heavy paper 3 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-10degC,0:0degC,1:+5degC,2:+10deg C 5degC 0
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TMP-TBL6 Lv.1 Details
Setting of fixing control temp: envelope To set the offset of fixing control temperature for envelope. Asthevalueisincreasedby1,thecontroltemperatureis increasedby5degC. Increase the value when the fixing failure occurs. Decrease the value when the fixing offset occurs. When the offset or fixing failure occurs on envelope 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-10degC,0:0degC,1:+5degC,2:+10deg C 5degC 0
8-320
8
COPIER>OPTION>IMG-FIX
FXS-TMP2 Lv.1 Details
8-321
COPIER>OPTION>IMG-FIX
FXS-TMP4 Lv.1 Details SettingofITOPcontroltemp:heavy3 TosettheoffsetofITOPcontroltemperatureforheavypaper3 (210to256g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonheavypaper3 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-15degC,-1:-7degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FXS-TMP3 Lv.1 Details
SettingofITOPcontroltemp:heavy1 TosettheoffsetofITOPcontroltemperatureforheavypaper 1(106to163g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonheavypaper1 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-15degC,-1:-7degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FXS-TMP5 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofITOPcontroltemp:heavy2 TosettheoffsetofITOPcontroltemperatureforheavypaper2 (164to209g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonheavypaper2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-15degC,-1:-7degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofITOPcontroltemp:thinppr TosettheoffsetofITOPcontroltemperatureforthinpaper. Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonthinpaper 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-15degC,-1:-7degC,0:0degC,1:+5degC,2:+10degC 5degC 0
8-321
8
COPIER>OPTION>IMG-FIX
FXS-TMP6 Lv.1 Details
8-322
COPIER>OPTION>IMG-FIX
FXST2-UH Lv.1 Details SetheavypprITOPstandbytime:LLev Tosetthetimeforinitialrotationwhenfeedingtheheavypaper 1/2/3in18degCorlowertemperature. Increase the value when the fixing failure occurs. When a fixing failure occurs in LL environment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to30 1second 0
SettingofITOPcontroltemp:envelope TosettheoffsetofITOPcontroltemperatureforenvelope. Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonenvelope 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,H1436-1:-5degC,0:0degC,1:+5degC,2:+10 degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FN-ENTMP Lv.1 Details
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FXST2-N2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetplainpaperITOPstandbytime:LLev Tosetthetimeforinitialrotationwhenfeedingtheplainpaper 1/plainpaper2in18degCorlowertemperature. Increase the value when the fixing failure occurs. When a fixing failure occurs in LL environment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to20 1second 0
SetofFixingCoolingFanON/OFFtemp TosettheON/OFFtemperatureofFixingCoolingFan(Front/ Rear). Asthevalueisincrementedby1,thetemperatureisincreasedby 5degC. When fixing offset/fixing failure occurs at the edge of small size paper 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -4to4 -4:-20degC,-3:-15degC,-2:-10degC,-1:-5degC,0:0degC, 1:5degC,2:10degC,3:15degC,4:20degC 5degC 0
8-322
8
COPIER>OPTION>IMG-FIX
FLYING Lv.2 Details
8-323
COPIER>OPTION>IMG-FIX
TMP-TBL8 Lv.1 Details Fixingcontroltemperatureset:transp To set the offset of fixing control temperature for transparency. Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Increase the value when fixing failure occurs. Decrease the value, when fixing offset occurs. When offset/fixing failure occurs on transparency 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TMP-TBL7 Lv.1 Details
ON/OFF of flying start temperature ctrl To set ON/OFF of flying start temperature control. When "1" is set, the flying start temperature control is not executed.Thisismorelife-consciousforFixingAssembly comparedto"0". WhenpreferringtoextendthelifeofFixingAssembly.However, settingof"1"doesnotmeanthatthelifeofFixingAssemblyis alwaysextended. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. When"1"isset,FPOTisreduced. 0to1 0:ON,1:OFF
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMX-OF-Y Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Fixingcontroltemperaturesetting:pln2 To set the offset of fixing control temperature for plain paper 2 (82 to105g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Increase the value when fixing failure occurs. Decrease the value, when fixing offset occurs. When offset/fixing failure occurs on plain paper 2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod
AdjustmentofYcolorD-maxsetting WhenadjustingD-maxcontrolsettingincasethatdensityofsolid areaonyellowcolorimageisnotappropriateevenperforming autogradationadjustment. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishigh. Whendensityofsolidareaonanimageisnotappropriateeven performingautogradationadjustment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Executeautogradationadjustment. Besuretoexecuteautogradationadjustment(fulladjustment) afterthesettingisdone.. -3to3
8-323
8
COPIER>OPTION>IMG-FIX
DMX-OF-M Lv.2 Details
8-324
COPIER>OPTION>IMG-FIX
DMX-OF-K Lv.2 Details AdjustmentofBkcolorD-maxsetting WhenadjustingD-maxcontrolsettingincasethatdensityofsolid areaonblackcolorimageisnotappropriateevenperforming autogradationadjustment. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishigh. Whendensityofsolidareaonanimageisnotappropriateeven performingautogradationadjustment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Executeautogradationadjustment. Besuretoexecuteautogradationadjustment(fulladjustment) afterthesettingisdone.. -3to3
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DMX-OF-C Lv.2 Details
AdjustmentofMcolorD-maxsetting WhenadjustingD-maxcontrolsettingincasethatdensityofsolid areaonmagentacolorimageisnotappropriateevenperforming autogradationadjustment. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishigh. Whendensityofsolidareaonanimageisnotappropriateeven performingautogradationadjustment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Executeautogradationadjustment. Besuretoexecuteautogradationadjustment(fulladjustment) afterthesettingisdone.. -3to3
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TMP-TBL9 Lv.1 Details
Usecase Adj/set/operatemethod
AdjustmentofCcolorD-maxsetting WhenadjustingD-maxcontrolsettingincasethatdensityofsolid areaoncyancolorimageisnotappropriateevenperformingauto gradationadjustment. Increasethevaluewhenthedensityislowanddecreasethe valuewhenthedensityishigh. Whendensityofsolidareaonanimageisnotappropriateeven performingautogradationadjustment 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 3)Executeautogradationadjustment. Besuretoexecuteautogradationadjustment(fulladjustment) afterthesettingisdone.. -3to3
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Fixingcontroltemperaturesetting:coat1 To set the offset of fixing control temperature for coated paper 1 (106to163g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Increase the value when fixing failure occurs. Decrease the value, when fixing offset occurs. When offset/fixing failure occurs on coated paper 1 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:+5degC,2:+10degC 5degC 0
8-324
8
COPIER>OPTION>IMG-FIX
TMP-TB10 Lv.1 Details
8-325
COPIER>OPTION>IMG-FIX
FXS-TMP8 Lv.1 Details SettingofITOPcontroltemp:transp TosettheoffsetofITOPcontroltemperaturefortransparency. Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeontransparency 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FXS-TMP7 Lv.1 Details
Fixingcontroltemperaturesetting:coat2 To set the offset of fixing control temperature for coated paper2 (164to209g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Increase the value when fixing failure occurs. Decrease the value, when fixing offset occurs. When offset/fixing failure occurs on coated paper 2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FXS-TM10 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofITOPcontroltemp:plainppr2 TosettheoffsetofITOPcontroltemperatureforplainpaper2(82 to105g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeonplainpaper2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SettingofITOPcontroltemp:coat2 TosettheoffsetofITOPcontroltemperatureforcoatedpaper2 (164to209g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeoncoatedpaper2 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
8-325
8
COPIER>OPTION>IMG-FIX
FXS-TMP9 Lv.1 Details
8-326 CUSTOM
COPIER>OPTION>CUSTOM
TEMP-TBL Lv.1 Details Fixingcontroltemperaturesetting:pln1 To set the fixing control temperature for plain paper 1 (64 to 81 g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Increase the value when fixing failure occurs. Decrease the value, when fixing offset occurs. When offset/fixing failure occurs on plain paper 1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:+5degC,2:+10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo THIN-LP Lv.2 Details
SettingofITOPcontroltemp:coat1 TosettheoffsetofITOPcontroltemperatureforcoatedpaper1 (106to163g/m2). Asthevalueisincrementedby1,thecontroltemperatureis increasedby5degC. Whenunevenglossoccursintheareathatis94mmfromthe leadingedgeoncoatedpaper1 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -2to2 -2:-10degC,-1:-5degC,0:0degC,1:5degC,2:10degC 5degC 0
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SC-L-CNT Lv.1 Details
Set of fixing arch ctrl with thin paper Tosetthearchcontrolmethodbetweenthesecondarytransfer and fixing when feeding thin paper (52g/m2). Normally,thearchcontrolisexecutedatthepointwherearchon thetrailingedgeofpaperissmall. When1issetinthecasethatanimagefailure(crepemark) occurswiththinpaper,thecontrolisalwaysexecutedatthepoint wherethearchonapaperislargewhilefeedingthinpaper. Whenanimagefailure(crepemark)occurswiththinpaper Enterthesettingvalue,andthenpressOKkey. 0to1 0:Archcontrolatthepointwherearchissmall,1:Archcontrolto makethearchlargewiththinpaper
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setlargepaperjdgmtreferenceatscan Tosetthejudgmentreferenceofthescancounterastowhichto useB4orLTRtodeterminelargesize. Thethresholdisdeterminedbythecombinationwiththesettingof B4-L-CNT. SC-L-CNT=0,B4-L-CNT=0:paperexceedingB4isdeterminedas largesize,paperwithB4orsmallerisdeterminedassmallsize. SC-L-CNT=0,B4-L-CNT=1:paperwithB4orlargerisdetermined aslargesize,papersmallerthanB4isdeterminedassmallsize. Asneeded 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:B4size,1:LTRsize
0 COPIER>OPTION>USER>B4-L-CNT
T-8-59
8-326
8
COPIER>OPTION>CUSTOM
SCANTYPE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ABK-TOOL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-327
Addressbookmaintenancetool:ToolprovidedfromCMJ.
T-8-60
8-327
8
USER
COPIER>OPTION>USER
COPY-LIM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SLEEP Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-328
COPIER>OPTION>USER
SIZE-DET Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COUNTER1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ON/OFFoforiginalsizedetectfunction TosetON/OFFoforiginalsizedetectionfunction. Uponuser'srequest(glareofthescanlamp,etc) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON 1 Displayofsoftwarecounter1 Todisplaycountertypeforsoftwarecounter1ontheCounter Checkscreen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Displayonly.Nochangeisavailable. 0to999 0:Notregistered Thevaluediffersaccordingtothelocation. -
Settingofupperlimitforcopy Tosettheupperlimitvalueforcopy. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to9999 999 Settingofautosleepfunction TosetON/OFFofautosleepfunction. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON 1 Transfertimetosleepmodeissetintheusermode (Preferences>Timer/EnergySettings>AutoSleepTime).
8-328
8
COPIER>OPTION>USER
COUNTER2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COUNTER3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-329
COPIER>OPTION>USER
COUNTER4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COUNTER5 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Settingofsoftwarecounter4 Tosetcountertypeforsoftwarecounter4ontheCounterCheck screen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered Thevaluediffersaccordingtothelocation. Settingofsoftwarecounter5 Tosetcountertypeforsoftwarecounter5ontheCounterCheck screen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered 0 -
Settingofsoftwarecounter2 Tosetcountertypeforsoftwarecounter2ontheCounterCheck screen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered Thevaluediffersaccordingtothelocation. Settingofsoftwarecounter3 Tosetcountertypeforsoftwarecounter3ontheCounterCheck screen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered Thevaluediffersaccordingtothelocation. -
8-329
8
COPIER>OPTION>USER
COUNTER6 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DATE-DSP Lv.2 Details
8-330
COPIER>OPTION>USER
MB-CCV Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CONTROL Lv.1 Details ControlcardusagelimitforMailBox TorestrictuseofcontrolcardforMailBox. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Unlimited,1:Limited 0 ChargesettingofPDLjob TosetchargecounttransmissionofPDLjobtotheconnecting chargingmanagementdevice(coinmanagerornon-Canonmadecontrolcard). Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Nocharge,1:Charge 0 T-8-61
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settingofsoftwarecounter6 Tosetcountertypeforsoftwarecounter6ontheCounterCheck screen. Uponuser/dealer'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered 0 Settingofdata/timedisplayformat Tosetdate/timedisplayformataccordingtothecountryor region. Afterthedisplayformatissetwiththismode,theorderofdateis reflected to the followings: Preferences > Timer/Energy Settings >Date/TimeSettings,andreportoutput. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:YYMM/DD,1:DD/MMYY,2:MM/DD/YY Thevaluediffersaccordingtothelocation. Preferences>Timer/EnergySettings>Date/TimeSettings -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-330
8
<Soft counter specifications>
8-331
No.
002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 071 072 073 074 081 082 083 084 091 092 093 094 101 102 103 104 105 106 108 109 110 111 112
The numbers entered for software counters are classified as follows: No.
000to099 100to199 200to299 300to399 400to499 500to599 600to699 700to799 800to899 900to999 Remotecopy Total Copy Print Copyandprint Scan Box Receptionprint Reportprint Transmission
T-8-62
CounterDetails
Remotecopy(fullcolor1) Remotecopy(fullcolor2) Remotecopy(monocolor1) Remotecopy(monocolor2) Remotecopy(blackandwhite1) Remotecopy(blackandwhite2) Remotecopy(fullcolor/large) Remotecopy(fullcolor/small) Remotecopy(monocolor/large) Remotecopy(monocolor/small) Remotecopy(blackandwhite/large) Remotecopy(blackandwhite/small) Remotecopy(fullcolor+monocolor/large) Remotecopy(fullcolor+monocolor/small) Remotecopy(fullcolor+monocolor2) Remotecopy(fullcolor+monocolor1) Remotecopy(fullcolor/large/doublesided) Remotecopy(fullcolor/small/doublesided) Remotecopy(monocolor/large/doublesided) Remotecopy(monocolor/small/doublesided) Remotecopy(blackandwhite/large/doublesided) Remotecopy(blackandwhite/small/doublesided) Tonerbottleblack Tonerbottleyellow Tonerbottlemagenta Tonerbottlecyan Tonerbottleblack+Removethetonerbottleblack Tonerbottleyellow+Removethetonerbottleyellow Tonerbottlemagenta+Removethetonerbottlemagenta Tonerbottlecyan+Removethetonerbottlecyan 1/10Tonerbottleblack 1/10Tonerbottleyellow 1/10Tonerbottlemagenta 1/10Tonerbottlecyan Total1 Total2 Total(large) Total(small) Total(fullcolor2) Total(fullcolor2) Total(blackandwhite1) Total(blackandwhite2) Total(monocolor/large) Total(monocolor/small) Total(blackandwhite/large)
CounterDetails
Meaningsofsymbolsintables
8-331
8
No.
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157
8-332
No.
158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229
CounterDetails
Total(blackandwhite/small) Total1(doublesided) Total2(doublesided) large(doublesided) small(doublesided) Total(monocolor1) Total(monocolor2) Total(fullcolor/large) Total(fullcolor/small) Total(fullcolor+monocolor/large) Total(fullcolor+monocolor/small) Total(fullcolor+monocolor2) Total(fullcolor+monocolor1) TotalA1 TotalA2 TotalA(large) TotalA(small) TotalA(fullcolor1) TotalA(fullcolor2) TotalA(blackandwhite1) TotalA(blackandwhite2) TotalA(monocolor/large) TotalA(monocolor/small) TotalA(blackandwhite/large) TotalA(blackandwhite/small) TotalA1(doublesided) TotalA2(doublesided) largeA(doublesided) smallA(doublesided) TotalA(monocolor1) TotalA(monocolor2) TotalA(fullcolor/large) TotalA(fullcolor/small) TotalA(fullcolor+monocolor/large) TotalA(fullcolor+monocolor/small) TotalA(fullcolor+monocolor2) TotalA(fullcolor+monocolor1) TotalB1 TotalB2 TotalB(large) TotalB(small) TotalB(fullcolor1) TotalB(fullcolor2) TotalB(blackandwhite1) TotalB(blackandwhite2)
CounterDetails
TotalB(monocolor/large) TotalB(monocolor/small) TotalB(blackandwhite/large) TotalB(blackandwhite/small) TotalB1(doublesided) TotalB2(doublesided) largeB(doublesided) smallB(doublesided) TotalB(monocolor1) TotalB(monocolor2) TotalB(fullcolor/large) TotalB(fullcolor/small) TotalB(fullcolor+monocolor/large) TotalB(fullcolor+monocolor/small) TotalB(fullcolor+monocolor2) TotalB(fullcolor+monocolor1) Copy(Total1) Copy(Total2) Copy(large) Copy(small) CopyA(Total1) CopyA(Total2) CopyA(large) CopyA(small) Localcopy(Total1) Localcopy(Total2) Localcopy(large) Localcopy(small) Remotecopy(Total1) Remotecopy(Total2) Remotecopy(large) Remotecopy(small) Copy(fullcolor1) Copy(fullcolor2) Copy(monocolor1) Copy(monocolor2) Copy(blackandwhite1) Copy(blackandwhite2) Copy(fullcolor/large) Copy(fullcolor/small) Copy(monocolor/large) Copy(monocolor/small) Copy(blackandwhite/large) Copy(blackandwhite/small) Copy(fullcolor+monocolor/large)
8-332
8
No.
230 231 232 233 234 235 236 237 238 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 273 274 275 276 277 278 279 280 281 282 283 284 285 286
8-333
No.
287 288 289 290 291 292 293 294 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 339
CounterDetails
Copy(fullcolor+monocolor/small) Copy(fullcolor+monocolor/2) Copy(fullcolor+monocolor/1) Copy(fullcolor/large/doublesided) Copy(fullcolor/small/doublesided) Copy(monocolor/large/doublesided) Copy(monocolor/small/doublesided) Copy(blackandwhite/large/doublesided) Copy(blackandwhite/small/doublesided) CopyA(fullcolor1) CopyA(fullcolor2) CopyA(monocolor1) CopyA(monocolor2) CopyA(blackandwhite1) CopyA(blackandwhite2) CopyA(fullcolor/large) CopyA(fullcolor/small) CopyA(monocolor/large) CopyA(monocolor/small) CopyA(blackandwhite/large) CopyA(blackandwhite/small) CopyA(fullcolor+monocolor/large) CopyA(fullcolor+monocolor/small) CopyA(fullcolor+monocolor2) CopyA(fullcolor+monocolor1) CopyA(fullcolor/large/doublesided) CopyA(fullcolor/small/doublesided) CopyA(monocolor/large/doublesided) CopyA(monocolor/small/doublesided) CopyA(blackandwhite/large/doublesided) CopyA(blackandwhite/small/doublesided) Localcopy(fullcolor1) Localcopy(fullcolor2) Localcopy(monocolor1) Localcopy(monocolor2) Localcopy(blackandwhite1) Localcopy(blackandwhite2) Localcopy(fullcolor/large) Localcopy(fullcolor/small) Localcopy(monocolor/large) Localcopy(monocolor/small) Localcopy(blackandwhite/large) Localcopy(blackandwhite/small) Localcopy(fullcolor+monocolor/large) Localcopy(fullcolor+monocolor/small)
CounterDetails
Localcopy(fullcolor+monocolor2) Localcopy(fullcolor+monocolor1) Localcopy(fullcolor/large/doublesided) Localcopy(fullcolor/small/doublesided) Localcopy(monocolor/large/doublesided) Localcopy(monocolor/small/doublesided) Localcopy(blackandwhite/large/doublesided) Localcopy(blackandwhite/small/doublesided) Print(Total1) Print(Total2) Print(large) Print(small) PrintA(Total1) PrintA(Total2) PrintA(large) PrintA(small) Print(fullcolor1) Print(fullcolor2) Print(monocolor1) Print(monocolor2) Print(blackandwhite1) Print(blackandwhite2) Print(fullcolor/large) Print(fullcolor/small) Print(monocolor/large) Print(monocolor/small) Print(blackandwhite/large) Print(blackandwhite/small) Print(fullcolor+monocolor/large) Print(fullcolor+monocolor/small) Print(fullcolor+monocolor/2) Print(fullcolor+monocolor/1) Print(fullcolor/large/doublesided) Print(fullcolor/small/doublesided) Print(monocolor/large/doublesided) Print(monocolor/small/doublesided) Print(blackandwhite/large/doublesided) Print(blackandwhite/small/doublesided) PDLPrint(Total1) PDLPrint(Total2) PDLPrint(large) PDLPrint(small) PDLPrint(fullcolor1) PDLPrint(fullcolor2) PDLPrint(blackandwhite1)
8-333
8
No.
340 341 342 345 346 351 352 355 356 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 501 502 503 504 505 506 507 508 509 510 511 512 601 602
8-334
No.
603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 701 702 703 704 705 706 709 710 711 712 715 716 721 722 725 726 727 728 729 730 731
CounterDetails
PDLPrint(blackandwhite2) PDLPrint(fullcolor/large) PDLPrint(fullcolor/small) PDLPrint(blackandwhite/large) PDLPrint(blackandwhite/small) PDLPrint(fullcolor/large/doublesided) DLPrint(fullcolor/small/doublesided) PDLPrint(blackandwhite/large/doublesided) PDLPrint(blackandwhite/small/doublesided) Copy+print(fullcolor/large) Copy+print(fullcolor/small) Copy+print(blackandwhite/large) Copy+print(blackandwhite/small) Copy+print(blackandwhite2) Copy+print(blackandwhite1) Copy+print(fullcolor+monocolor/large) Copy+print(fullcolor+monocolor/small) Copy+print(fullcolor+monocolor/2) Copy+print(fullcolor+monocolor/1) Copy+print(large) Copy+print(small) Copy+print(2) Copy+print(1) Copy+print(monocolor/large) Copy+print(monocolor/small) Copy+print(fullcolor/large/doublesided) Copy+print(fullcolor/small/doublesided) Copy+print(monocolor/large/doublesided) Copy+print(monocolor/small/doublesided) Copy+print(blackandwhite/large/doublesided) Copy+print(blackandwhite/small/doublesided Scan(Total1) Scan(Total2) Scan(large) Scan(small) BlackandwhiteScan(Total1) BlackandwhiteScan(Total2) BlackandwhiteScan(large) BlackandwhiteScan(small) Colorscan(Total1) Colorscan(Total2) Colorscan(large) Colorscan(small) Boxprint(Total1) Boxprint(Total2)
CounterDetails
Boxprint(large) Boxprint(small) Boxprint(fullcolor1) Boxprint(fullcolor2) Boxprint(monocolor1) Boxprint(monocolor2) Boxprint(blackandwhite1) Boxprint(blackandwhite2) Boxprint(fullcolor/large) Boxprint(fullcolor/small) Boxprint(monocolor/large) Boxprint(monocolor/small) Boxprint(blackandwhite/large) Boxprint(blackandwhite/small) Boxprint(fullcolor+monocolor/large) Boxprint(fullcolor+monocolor/small) Boxprint(fullcolor+monocolor2) Boxprint(fullcolor+monocolor1) Boxprint(fullcolor/large/doublesided) Boxprint(fullcolor/small/doublesided) Boxprint(monocolor/large/doublesided) Boxprint(monocolor/small/doublesided) Boxprint(blackandwhite/large/doublesided) Boxprint(blackandwhite/small/doublesided) Receptionprint(Total1) Receptionprint(Total2) Receptionprint(large) Receptionprint(small) Receptionprint(fullcolor1) Receptionprint(fullcolor2) Receptionprint(blackandwhite1) Receptionprint(blackandwhite2) Receptionprint(fullcolor/large) Receptionprint(fullcolor/small) Receptionprint(blackandwhite/large) Receptionprint(blackandwhite/small) Receptionprint(fullcolor/large/doublesided) Receptionprint(fullcolor/small/doublesided) Receptionprint(blackandwhite/large/doublesided) Receptionprint(blackandwhite/small/doublesided) AdvancedBoxPrint(Total1) AdvancedBoxPrint(Total2) AdvancedBoxPrint(large) AdvancedBoxPrint(small) AdvancedBoxPrint(fullcolor1)
8-334
8
No.
732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 801 802
8-335
No.
803 804 805 806 809 810 811 812 815 816 821 822 825 826 915 916 917 918 921 922 929 930 937 938 939 940 945 946 959 960 961 962 963 964 965
CounterDetails
AdvancedBoxPrint(fullcolor2) AdvancedBoxPrint(blackandwhite1) AdvancedBoxPrint(blackandwhite2) AdvancedBoxPrint(fullcolor/large) AdvancedBoxPrint(fullcolor/small) AdvancedBoxPrint(monocolor/large) AdvancedBoxPrint(monocolor/small) AdvancedBoxPrint(fullcolor/large/doublesided) AdvancedBoxPrint(fullcolor/small/doublesided) AdvancedBoxPrint(blackandwhite/large/doublesided) AdvancedBoxPrint(blackandwhite/small/doublesided) NetworkPrint(Total1) NetworkPrint(Total2) NetworkPrint(large) NetworkPrint(small) NetworkPrint(fullcolor1) NetworkPrint(fullcolor2) NetworkPrint(blackandwhite1) NetworkPrint(blackandwhite2) NetworkPrint(fullcolor/large) NetworkPrint(fullcolor/small) NetworkPrint(monocolor/large) NetworkPrint(blackandwhite/small) NetworkPrint(fullcolor/large/doublesided) NetworkPrint(fullcolor/small/doublesided) NetworkPrint(blackandwhite/large/doublesided) NetworkPrint(blackandwhite/small/doublesided) MobilePrint(Total1) MobilePrint(Total2) MobilePrint(large) MobilePrint(small) MobilePrint(fullcolor1) MobilePrint(fullcolor2) MobilePrint(blackandwhite1) MobilePrint(blackandwhite2) MobilePrint(fullcolor/large) MobilePrint(fullcolor/small) MobilePrint(blackandwhite/large) MobilePrint(blackandwhite/small) MobilePrint(fullcolor/large/doublesided) MobilePrint(fullcolor/small/doublesided) MobilePrint(blackandwhite/large/doublesided) MobilePrint(blackandwhite/small/doublesided) Reportprint(Total1) Reportprint(Total2)
CounterDetails
Reportprint(large) Reportprint(small) Reportprint(fullcolor1) Reportprint(fullcolor2) Reportprint(blackandwhite1) Reportprint(blackandwhite2) Reportprint(fullcolor/large) Reportprint(fullcolor/small) Reportprint(blackandwhite/large) Reportprint(blackandwhite/small) Reportprint(fullcolor/large/doublesided) Reportprint(fullcolor/small/doublesided) Reportprint(blackandwhite/large/doublesided) Reportprint(blackandwhite/small/doublesided) Transmissionscantotal2(color) Transmissionscantotal2(blackandwhite) Transmissionscantotal3(color) Transmissionscantotal3(blackandwhite) Transmissionscantotal5(color) Transmissionscantotal5(blackandwhite) Transmissionscantotal6(color) Transmissionscantotal6(blackandwhite) Boxscan(color) Boxscan(blackandwhite) Remotescan(color) Remotescan(blackandwhite) Transmissionscan/E-mail(color) Transmissionscan/E-mail(blackandwhite) MediaScan(Color) MediaScan(blackandwhite) ApplicationScan(Total1) ApplicationBlackandwhiteScan(Total1) ApplicationColorScan(Total1) SuperBoxLocalScan(Color) SuperBoxLocalScan(Blackandwhite)
T-8-63
8-335
8
COPIER>OPTION>USER
B4-L-CNT Lv.1 Details
8-336
COPIER>OPTION>USER
MF-LG-ST Lv.2 Details Dis/hideoflongstripmode Tosetwhethertodisplayorhidethe[LongOriginal]button. When1isset,[LongOriginal]buttonisdisplayedinCopy> Optionsscreenandthelongstrippaperbecomesavailable. Uponuser'srequest.(useoflongstriporiginalorlongstrip paper) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. LongstrippaperisejectedfromSecondaryDeliveryMouth (excludingdeliveryfromInnerFinisher). 0to1 0:Hide,1:Display 0 Copy>Options Display/hideofserialNo. TosetwhethertodisplayorhidetheserialNo.ontheCounter Checkscreen. Whensettingtodisplay/hideserialNo.ontheCounterCheck screen 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Display,1:Hide 0 Settingofcopyjobreservation
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRY-STP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
CountsettingofB4size TosetB4countwithsoftwarecounter1to8astowhetherB4is countedaslargesizeorsmallsize. Selecting1countsB4orlargersizepaperaslargesizewhile papersmallerthanB4sizeassmallsize. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Smallsize,1:Largesize 0 COPIER>OPTION>FNC-SW>SC-L-CNT Stop setting at finisher tray full Tosettostop/continueoutputatthetimeoftrayfulldetectionof theFinisher. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Attrayfulldetection,1:Heightdetectiononly 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CNT-DISP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COPY-JOB
8-336
8
COPIER>OPTION>USER
Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo NW-SCAN Lv.2 Details Usecase Adj/set/operatemethod Caution
8-337
COPIER>OPTION>USER
HDCR-DSP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange SettingofHDDcompletedeletemethod TosetdatadeletionmethodofHDDdatacompletedeletion function. WhenswitchingthedeletionmethodinHDDdatacomplete deletionmode 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to4 1:1-timedeletionwith0data,2:1-timedeletionwithrandom data,3:3-timedeletionwithrandomdata,4:DOD 1 HDDdatacompletedeletionfunction:afunctiontocompletely deletedatainHDDbyoverwritingwith0(null)dataorrandom data to the file data when logically deleting file on HDD (deleting managementinformationdata). Jobintvlsettingatinterruptioncopy Tosetoutputintervalbetweenjobsatthetimeofinterruption copy. Sorting is difficult after interruption copy because of the continuousoutputofthenextjob.Paperintervalbecomeslonger whenstartingpickupforthenextjobafterthelastsheetofthe previousjobisdelivered. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Continuousoutputoftheinterruptioncopyandthenextjob 1:Startingpickupforthenextjobaftertheinterruptioncopyis deliveredall. 2:Startingpickupforthenextjobafterthepreviousjobis deliveredall.(Foralljobs) 0 -
Tosettoenable/disablecopyjobreservationwhentheCard Reader/CoinManagerisused. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Enabled,1:Disabled 0 Settingofnetworkscanfunctionusage Tosettoenable/disableuseofnetworkscanfunction. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. DonotusethismodeinJapan. For PS/PCL machines for overseas (outside Japan), fix the settingvalueas1.Forothers,permittheuse. 0to1 0:Disabled,1:Enabled -
8-337
8
COPIER>OPTION>USER
TAB-ROT Lv.1 Details
8-338
COPIER>OPTION>USER
IDPRN-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Chargetargetjobsetofdeptmngmcntr Tosetthejobtypethatadvancesthedepartmentmanagement counter. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0: PRINTcategory:BoxPrint,ReportPrint,SendLocalPrint,PDL Print COPYcategory:COPY 1: PRINTcategory:ReportPrint,SendLocalPrint,PDLPrint COPYcategory:COPY,BoxPrint 0 SetofoperationatDevelopingUnitlife TosettheoperationwhenDevelopingUnitreachesitslife. When1isset,DevelopingUnitwhichreacheditslifecannotbe used. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:DevelopingUnitdoesnotstop,1:DevelopingUnitstops 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PR-PSESW Lv.1 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetoflandscapeimgrotnatPDL:tabppr Tosetwhethertorotatelandscapeimageby180degreeswhen PDLprintismadeontabpaper. When"1:Rotated"isset,imageisrotated. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notrotated,1:Rotated 0 Display/hideofoutputStopbutton Tosetwhethertodisplayorhide[Stop]buttonontheStatus Monitorscreen. Uponuser'srequest. Whenpromptlystoppingtheprintjobinoperationorunder reservation 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo P-CRG-LF Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-338
8
COPIER>OPTION>USER
CPRT-DSP Lv.1 Details
8-339
COPIER>OPTION>USER
CNT-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setdefaultdisitemsonchargecounter TosetdefaultdisplayitemsofthechargecounterontheCounter Checkscreen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 <ForNorthAmerica> 0: Counter1-Total1:101 Counter2-Total(Black1):108 Counter3-Copy(Fullcolor+SingleColor/Large):229 Counter4-Copy(FullColor+SingleColor/Small):230 Counter5-Print(FullColor+SingleColor/Large):321 Counter6-Print(FullColor+SingleColor/Small):322 1: Counter1-Total2:102 Counter2-Total(Black2):109 Counter3-Copy(FullColor+SingleColor/Large):229 Counter4-Copy(FullColor+SingleColor/Small):230 Counter5-Print(FullColor+SingleColor/Large):321 Counter6-Print(FullColor+SingleColor/Small):322 2to5: Notused <ForEurope> 0: Counter1-Total(Black/Large):112 Counter2-Total(Black/Small):113 Counter3-Total(FullColor+SingleColor/Large):122 Counter4-Total(FullColor+SingleColor/Small):123 Counter5-ColorScan(Total1):501 Counter6-Print(Total1):301 1: Counter1-Total1:101 2to5: Notused 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PCL-COPY Lv.2 Details
ON/OFFof[PrintChargeLog]button Tosetwhethertodisplaythe[PrintChargeLog]buttontoprint thechargelogsonthechargelogscreeninusermode. When"1:ON"isset,thebuttonisdisplayedinManagement Settings>ChargeManagement>ChargeLogScreen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON 0 ManagementSettings>ChargeManagement>ChargeLog SetofPCLCOPIEScommandcontrolmethod TosetthebindercontrolmethodofCOPIEScommandwithPCL. SelectwhethertousethecontrolmethodofCanon-madePCL orusethesamecontrolmethodofnon-Canon-madePCL. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535 0:ControlmethodofCanon-madePCL(followingthevalueof COPIES command that is specified for each page to control on a pagebasis) 1:Controlmethodofnon-Canon-madePCL(handlingthevalue of COPIES command, which is specified for page 1 at the time of Collate mode, as bind figure while the value of COPIES commandforthenextpageorlaterisinvalid.Samecontrol appliesasCanon-madePCLatthetimeofNonSortedmode) 2to65535:Forfutureuse 0 -
8-339
8
COPIER>OPTION>USER
BCNT-AST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PRJOB-CP Lv.2 Details
8-340
COPIER>OPTION>USER
DFLT-CPY Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Settingofcolormodeforcopy Tosetthedefaultcolormodeforcopyoperation. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:BasedonAuto/ACS/PrinterDriversettings,1:Colormode,2: B/Wmode Europe:2,OtherthanEurope:0 FunctionSettings>Copy>SelectColorSettingsforCopy>Use Auto(Color/Black)Selection Setofcolormodeforboxprint Tosetthedefaultcolormodeforboxprintoperation. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:BasedonAuto/ACS/PrinterDriversettings,1:Colormode,2: B/Wmode Europe:2,OtherthanEurope:0 FunctionSettings>Copy>SelectColorSettingsforCopy>Use Auto(Color/Black)Selection -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setofboxprintchargetargetjob TosetthejobtypethatadvancesthecountinboxprintwithNE Controller(ASSIST). Whenswitchingthejobtypethatissubjecttocountingofthebox printwithNEController 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:PDLjob,1:Copyjob 0 SetcountTXatRX/reportprint Tosettoenable/disableapage-basiscountpulsetransmission tothechargingmanagementdeviceatthetimeofreceptionprint orreportprint. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notransmission,1:Transmission 0 Chargingmanagementdevice:Coinmanager,Non-Canon-made controlcard
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFLT-BOX Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-340
8
COPIER>OPTION>USER
DOC-REM Lv.1 Details
8-341
COPIER>OPTION>USER
RUI-RJT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SND-RATE Lv.2 Details ConnctsetatinvalidauthfromremoteUI TosettodisconnectHTTPportwhenthemachinereceives invalidauthenticationfromremoteUI3times. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Continuedconnection,1:Disconnected 0 SetcompressratioatSENDhighcompress Tosetthecompressionratiowhenthedatacompressionratiofor SEND(transmission)issetto"HighCompression". As the value is larger, the compression ratio is higher (the file sizebecomessmall). When making the transmission file size smaller 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Asthevalueistoolarge,animageisdeteriorated. 0to2 0:Compressionratio1/16,1:Compressionratio1/20,2: Compressionratio1/24 0 FunctionSettings>Send>CommonSettings>Data CompressionRatio -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DPT-ID-7 Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Dis/hideoforiginalremovalmessage Tosetwhethertodisplayorhidethemessagetoremoveoriginal whenscanningwithDADFwithoutopening/closingDADFafter scanningwiththecopyboard. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 PasswordentrysetatdeptIDreg/auth Tosetwhethertorequireapasswordentryatthetimeof registration/authenticationofdepartmentID. Withthesettingtorequireentry,entryof7-digitpasswordis requiredaswellasentryofdepartmentID. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:DepartmentIDonly,1:7-digit(password)entry 0 -
8-341
8
COPIER>OPTION>USER
CTM-S06 Lv.2 Details
8-342
COPIER>OPTION>USER
IFAX-SZL Lv.2 Details SettingofIFAXsendsizelimit TosetforrestrictingdatasizeatthetimeofIFAXtransmission thatdoesnotgothroughtheserver. Withthesettingtorestrictthedatasize,therewillbe#830error inthecaseofsendingdatathatexceedstheupperlimitvalue. Inthecasethatthedatagoesthroughtheserver,thesizeof transmissiondataisalwaysrestricted. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Limited,1:Notlimited(Restrictionapplieswhendatagoes throughtheserver.) 1 FunctionSettings>Send>E-Mail/I-FaxSettings>Maximum DataSizeforSending Specifytheupperlimitvaluefortransmissiondatasizeinuser mode. SetpagesplitTXatIFAXSimplemodeTX Tosettoenable/disablesplit-datatransmissiononapagebasis inthecasethatthetransmissionsizeinIFAXSimplemode exceedstheupperlimitvalue. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Inthecasetoenablesplit-datatransmission,besuretoget approvalfromtheuserbyexplainingthefollowing: Noguaranteeforpageorderonthereceptionside Thereisapossibilityofinterruptionofotherreceivedjobs betweenpages 0to1 0:Disabled,1:Enabled 0 COPIER>OPTION>CLEANING>W-CLN-P FunctionSettings>Send>E-Mail/I-FaxSettings>Maximum DataSizeforSending Specifytheupperlimitvaluefortransmissiondatasizeinuser mode.
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo0 FREG-SW Lv.2 Details Usecase Adj/set/operatemethod Caution
Set of password delete from export file To set to delete password for file transmission address from export file. With the setting to delete password, the password of file transmissiontargetisdeletedatthetimeofexportofaddress bookdatafromremoteUI. Uponuser'srequest Whenavoidinginformationleak 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Passwordisretained,1:Passwordisdeleted. 1 Dis/hideofMEAPcounterfreergstarea TosetwhethertodisplayorhidethefreeregisterareaofMEAP counterforSEND Attroubleanalysis 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. Takenecessaryactioninaccordancewiththeinstructions fromtheQualitySupportDivision. 0to1 0:Hide,1:Display 0 Individualcount-up(counteradvance)ofMEAPapplicationis availableinthefreeregisterareaofMEAPcounter.
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo IFAX-PGD Lv.2 Details
8-342
8
COPIER>OPTION>USER
MEAPSAFE Lv.2 Details
8-343
COPIER>OPTION>USER
PRNT-POS Lv.2 Details ON/OFFofallpausesaterrorjobcancel Tosetwhethertopausetheprintoperationoffollowingjobs whenajobiscancelledduetoanerrorinsidethemachine(#037, etc.)exceptservicecallsduringPDLprint. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON 0 Accesslimitsettingtousermode Tosettorestrictpasswordentrywhenaccessingtotheuser mode. Withthissettingisenabled,passwordentryofsystem administratorisrequiredafterpressingSettings/Registrationkey. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Passwordisnotrequired,1:Passwordisrequired 0 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRAY-FLL Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
SettingofMEAPsafemode TosetsafemodeforMEAPplatform. MPSFisdisplayedontheControlPanelinsafemode. Insafemode,MEAPapplicationisstoppedwhilejustthesystem application,whichstartswithinitialstate,isactivated.Thismode enablesobtaininglogforcauseanalysisofMEAPfailure. PerformsystemrecoveryprocessingwhenMEAPplatform fails to be activated due to resource confliction between MEAP applications,serviceregistrationoruseorder 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Normalmode,1:Safemode 0 Setoftargettrayfortrayfullnotice Tosetthetraywhichisthetargetofanoutputtrayfull notification. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Alltraystowhichpapercanbeoutput,1:Alltrayswhichare specified as the dedicated trays 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AFN-PSWD Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-343
8
COPIER>OPTION>USER
PTJAM-RC Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PDL-NCSW Lv.2 Details
8-344
COPIER>OPTION>USER
SLP-SLCT Lv.2 Details Usagesettingofnetworkapplications Withthesettingtousenetwork-relatedapplication,themachine canberecoveredthroughnetworkbecauseitdoesnotmoveto sleepmode1. Forthismachinetorecoverfromsleepmode1throughnetwork, aparticularpacketneedstobereceived;however,theexisting network-relatedapplicationdoesnotsendthispacket. Withthesettingnottousethenetwork-relatedapplication,this machinecannotrecoverfromsleepmode1throughnetwork whenitgetsintosleepmode1. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethisatthenormalservice. 0to1 0:Notused(Shifttosleepmode1isavailable.) 1:Used(Shifttosleepmode1isnotavailable.) 0 Network-relatedapplication:NetSpotAccountant,imageWARE CompatiblemodesettingatPSusage Tosetforcompatibilitywithexistingmachineregardingimage process or print specification with PS print. Selecting1enablestohavetheprintresultequivalenttothatof iR2200/2800/3300serieswhileselecting2enablestohavethe printresultequivalenttothatofiR105series. Atreplacement 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to65535 0:NouseofcompatibilitymodewithPS 1:PSType3halftonecommandexistingcompatibility(Orderof growingditherisopposite.) 2to65535:Spare -
AutoreprintsettingatPDLprintjam Tosettoautomaticallyrestartprintingafterjamrecoverythat occurswithPDLprint. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notautomaticallyreprinted,1:Automaticallyreprinted 1 CardmngmsettingforPDLprintjob TosettomakePDLprintjobtobesubjecttocardmanagement bytheCardReader. Withthesettingtoenablethismode,PDLprintisavailable onlywhenthecardIDofthecardinsertedtotheCardReader matchesthedepartmentID. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:PDLprintisavailablewithnocardinserted. 1:PDLprintisavailableonlywhenthecardIDmatchesthe departmentIDwhenthecardisinserted. 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PS-MODE Lv.2 Details
8-344
8
COPIER>OPTION>USER
CNCT-RLZ Lv.2 Details
8-345
COPIER>OPTION>USER
COUNTER8 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2C-CT-SW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Settingofsoftwarecounter8 Tosetcountertypeforsoftwarecounter8ontheCounterCheck screen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered 0 Setofcolorcounterat2-colormode Tosetwhethertousethemonocolorcounterorfullcolorcounter forcount-upin2-colormode. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Monocolorcounter,1:Fullcolorcounter 1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
COUNTER7 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settingofconnectionserializefunction Connectionserializeisafunctiontoassurejobgroupingfunction ofimageWAREOutputManagerSelectEditionV1.0. Thesettingtoenablethismodecanavoidjobrearrangement becausethemachinedoesnotreceivejobdatafromother connectionuntilitcompletesjobdatareceptionfromthecurrent connection. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON 0 Connection:Connectiontobeestablishedthroughnetwork betweenmultiplehosts(PC,etc). Jobgroupingfunction:AfunctionofimageWAREOutput ManagerSelectEditionV1.0topreventjobinterruptionfrom otherPCbygroupjob(sendingmultiplejobsin1sessionatjob transmission). Settingofsoftwarecounter7 Tosetcountertypeforsoftwarecounter7ontheCounterCheck screen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to999 0:Notregistered 0 -
8-345
8
COPIER>OPTION>USER
JA-FUNC Lv.2 Details Usecase Adj/set/operatemethod Caution
8-346
COPIER>OPTION>USER
JA-RESTR Lv.2 Details Settingofjobarchivelimititems To set restriction items for job archive specification. Withjobarchivefunctionenabled,followthesettingtoexecute operation to restrict specification. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ChangingthismodeisnotavailableinServiceMode,but referenceisavailable(inServicemode). ThismodeisavailableonlywiththeMEAPprogramthat supportsjobarchive. 0:OFF,1:ON 32 specification restrictions with Bit definition Bit0: Function to obtain image file (0: OFF, 1:ON) Bit1:Functiontocomposeformregistration(0:OFF,1:ON) Bit2:Functiontoeditdocument(0:OFF,1:ON) 0 COPIER>OPTION>USER>JA-FUNC RetrievalconditionsetforLDAPserver Tosettheconditiontosearche-mailaddress,etc.fromLDAP server. Whenspecifyingconditiontosearche-mailaddress,etc.from LDAPserver 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:Includesthenext,1:Notincludethenext,2:Equivalentto thenext,3:Notequivalenttothenext,4:Startswiththenext,5: Finisheswiththenext 4 LDAP(LightweightDirectoryAccessProtocol):Registering LDAPserverenablestosearche-mailaddress,etc.fromLDAP serverandtheresultcanberegisteredintheAddressBook, etc.Registrationisavailablebythefollowing:SetDestination> RegisterLDAPServer
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo JA-JOB Lv.2 Details
ON/OFFofjobarchivefunction TosetON/OFFofjobarchivefunction. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Changingthismodeisnotavailableinservicemode,butonly referenceisavailable. ThismodecanbesetonlywiththeMEAPprogramthatsupports jobarchive. 0:OFF,1:ON 0 Settingofjobarchivetargetjob Tosetthejobtypesubjecttojobarchive. Withthejobarchivefunctionenabled,archiveoperationis executedwhenexecutingthetargetjob. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Changingthismodeisnotavailableinservicemode,butonly referenceisavailable. ThismodecanbesetonlywiththeMEAPprogramthatsupports jobarchive. 0:N/A,3:LimitedtoFAX/IFAX,0xFFFFFFFF:Alljobs 0 COPIER>OPTION>USER>JA-FUNC -
Display/adj/setrange
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LDAP-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-346
8
COPIER>OPTION>USER
FROM-OF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DOM-ADD Lv.2 Details
8-347
COPIER>OPTION>USER
FILE-OF Lv.1 Details Filesendprohibitiontoenteredaddress To set to prohibit address entry at the time of file transmission. Filetransmissionisnotavailablebyenteringtheaddress becauseofnodisplayof"File"onthetransmissionscreen. TheaddressesalreadyregisteredintheAddressBookcanbe used. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Torestrictaddressesfortransmission,besuretomanually deletethembecausetheaddressesregisteredintheAddress Bookcanbeused. 0to1 0:Enabled,1:Disabled 0 Mailsendprohibitiontoenteredaddress Tosettoprohibitaddressentryatthetimeofe-mailtransmission. E-mailtransmissionisnotavailablebyenteringtheaddress becauseofnodisplayof"E-Mail"onthetransmissionscreen. TheaddressesalreadyregisteredintheAddressBookcanbe used. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Torestrictaddressesfortransmission,besuretomanually deletethembecausetheaddressesregisteredintheAddress Bookcanbeused. 0to1 0:Enabled,1:Disabled 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Deletionofmailsender'saddress Tosetwhethertodeletethesender'saddress(From)atthetime ofe-mailtransmission. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Retained,1:Deleted 0 Additionalentryofmaildestndomain To set to automatically add the domain specified in user mode tothesendingaddress(To)enteredatthetimeofe-mail transmission. Ifspecifying"xxx.com"asadomaininusermodeinadvance, justentering"aaa"enablestodisplay"aaa@xxx.com"when sendinge-mail. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notadded,1:Added 0 -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MAIL-OF Lv.1 Details
8-347
8
COPIER>OPTION>USER
IFAX-OF Lv.1 Details
8-348
COPIER>OPTION>USER
JA-DPI Lv.2 Details Disofjobarchiverecordresolution Todisplaytheresolutionofimagesforjobarchivesrecordedin jobsotherthanFAXreceptionandIFAXreception,etc. Onlydisplayisavailableinservicemode.Thesettingisavailable onlyintheMEAPapplicationswhichsupportjobarchiving. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0:Noconversion,1:100x100dpi,2:200x200dpi,3:300x 300dpi 3 Disofjobarchiverecordcompressratio Todisplaythecompressionratioofimagesforjobarchives recordedinjobsotherthanFAXreceptionandI-Faxreception, etc. Onlydisplayisavailableinservicemode.Thesettingisavailable onlyintheMEAPapplicationswhichsupportjobarchiving. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0:Noconversion,1:Compressionratio1/4,2:Compression ratio1/8,3:Compressionratio1/16,4:Compressionratio1/32,5: Compressionratio1/64 3 -
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LDAP-DEF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
IFAXsendprohibitiontoenteredaddress TosettoprohibitaddressentryatthetimeofI-Faxtransmission. IFAXtransmissionisnotavailablebyenteringtheaddress becauseofnodisplayof"I-Fax"onthetransmissionscreen. TheaddressesalreadyregisteredintheAddressBookcanbe used. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Torestrictaddressesfortransmission,besuretomanually deletethembecausetheaddressesregisteredintheAddress Bookcanbeused. 0to1 0:Enabled,1:Disabled 0 InitialcondtnsetofLDAPserversearch To set initial condition for search target attribute that is specified atthetimeofLDAPserverDetailssearch. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to6 0:Name,1:E-mail,2:FAX,3:Organization,4:Organization unit,5:Noregistration1(anysetting),6:Noregistration2(any setting) 0 COPIER>OPTION>USER>LDAP-SW -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo JA-COMPR Lv.2 Details
8-348
8
COPIER>OPTION>USER
FREE-DSP Lv.2 Details
8-349
COPIER>OPTION>USER
CLR-TIM Lv.2 Details SetofHDDEncryKitdatadeletetiming TosetthetimingtocompletelydeletethedatawhenHDD EncryptionKitisused. Selecting0mayreducethejobprocessingspeedbecausepage datathathasbeenalreadyprocessedisdeletedwhiletheother jobisinprocess,causingoverloadtoCPUandHDDaccess. Selecting1improvesthejobprocessingspeedbecausethe processisexecutedafterajobiscompleted. Uponrequesttoimprovethejobprocessingspeed 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Duringjobprocess,1:Afterthejobiscompleted 0 COPIER>OPTION>NETWORK>SSH-SW(level2) Displayofjobarchiverecordformat Todisplaytheformatofimagesforjobarchivesrecordedinjobs otherthanFAXreceptionandIFAXreception,etc. WhethertheimagesprocessedbyPacketJPEGarerecordedin PacketJPEG,orconvertedintoRasterJPEGandthenrecorded isdisplayed. Onlydisplayisavailableinservicemode.Thesettingisavailable onlyintheMEAPapplicationswhichsupportjobarchiving. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0:PacketJPEG,1:RasterJPEG 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TNRB-SW Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Display/hideofchargedisablescreen TosetwhethertodisplayorhidetheUseChargeManagement screenforswitchingbetweenchargeandnocharge. Thehardwareswitchforswitchingcharge/nochargeinthe CoinManagerenablesthemodeinwhichalltheservicesare availableforfree(storemanagermode)bytemporarilyreleasing thechargingsystem. Evenwithoutthehardwareswitch,themodecanbeswitched withthesoftwareswitchwhenitissettodisplaytheUseCharge ManagementscreeninSettings/Registration. Whenenablingalltheservicestobeprovidedforfreeby temporarilyreleasingthechargingsystem 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 ManagementSettings>ChargeManagement>UseCharge Management SettingofTonerCntnercounterdisplay TosetwhethertodisplayorhidetheTonerContainercounteron theCounterCheckscreen. Whennotshowingthescreentousers 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:Hide,1:Display(TonerContainercounteronly),2:Display (TonerContainercounter+ejectioncounter) CountriesotherthanUSA:0,USA:1 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo JA-FORMT Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-349
8
COPIER>OPTION>USER
HDCR-DSW Lv.1 Details
8-350
COPIER>OPTION>USER
SNMP-COU Lv.2 Details InsidecomtynameSNMPaccesslimit:user TorestrictSNMPaccessbythecommunityname(userright) thatiskeptinternally. Thismachineinternallyretainsthecommunityname(userright) other than the SNMP community name that is specified in user mode.Canon-madeutilitysoftware,suchasNetSpot,usesthis communityname. Becauseofsecurityconcern,select0/1inthecasetorestrict SNMPaccesswiththeinternalcommunityname. WhenrestrictingSNTPaccesswiththecommunityname(user right)thatisretainedinternally 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:OFF,1:Readonly,2:Read/Write 2 Preferences>Network>SNMPSettings>CommunityName2 Settings Setofmaxnumberofsheetsforstaple Tosetthemaximumnumberofsheetstobestapledinthe Finisher. When"1:60sheets"isset,thestaplingcapacitybecomes60 sheets. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:50sheets,1:60sheets 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SNMP-COA Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Dis/hideofHDDcompletedeleteON/OFF Tosetwhethertodisplayorhide"HardDiskDataComplete Deletion"inusermode. Withthissetting,HDDdatacompletedeletionfunctionis availablewithON/OFFbuttononthescreen. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. ThisisactivewhenCOPIER>OPTION>NETWORK>SSH-SW is1(ON). 0to1 0:Hide,1:Display 0 COPIER>OPTION>NETWORK>SSH-SW(level2) ManagementSettings>DataManagement>HDDData CompleteDeletion>HardDiskDataCompleteDeletion InsidecomtynameSNMPaccesslimit:admin TorestrictSNMPaccessbythecommunityname(administrator right)thatiskeptinternally. Thismachineinternallyretainsthecommunityname (administratorright)otherthantheSNMPcommunitynamethat is specified in user mode. Canon-made utility software, such as NetSpot,usesthiscommunityname. Becauseofsecurityconcern,select0/1inthecasetorestrict SNMPaccesswiththeinternalcommunityname. WhenrestrictingSNTPaccesswiththecommunityname (administratorright)thatisretainedinternally 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0:OFF,1:Readonly,2:Read/Write 2 Preferences>Network>SNMPSettings>CommunityName1 Settings -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STPL-MAX Lv.2 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-350
8
COPIER>OPTION>USER
SCALL-SW Lv.1 Details
8-351
COPIER>OPTION>USER
USBH-DSP Lv.2 Details Display/hideofUSBhostusage Tosetwhethertodisplay"Preferences>ExternalInterface> USBSettings>UseUSBHost". Byselecting"1:Display",whethertouseUSBhostonUSB settingscreencanbeselected. Whenswitchingtodisplayorhide"UseUSBHost"onUSB settingscreen 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Preferences>ExternalInterface>USBSettings>UseUSB Host Dis/hideofUSBex-memorydevicedriver Tosetwhethertodisplay"Preferences>ExternalInterface> USBSettings>UseMEAPDriverforUSBExternalDevice". Byselecting"0:Hide",theitemisnotdisplayed,andtheuser administratorcannotchangethesettingoftheMEAPdriverfor theUSBexternalmemorydevice. Whenprohibitingtheuseradministratortochangethesetting of"UseMEAPdriverforUSBexternaldevice",set0afterthe specified setting is completed. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 1 Preferences>ExternalInterface>USBSettings>UseMEAP DriverforUSBExternalDevice -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SCALLCMP Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Display/hideofrepairrequestbutton [Notused](Forexpansion) Tosetwhethertodisplayorhidetherepair-requestbuttononthe ControlPanel. Whenthesalescompanysupportsservicebytherepair-request button 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Setofrepairrequestcompletenotice [Notused](Forexpansion) With this setting enabled, a notification of repair completion is senttoUGWservertocleartherepair-requeststatusthatis retainedinternally. Servicetechnicianusesthismodeaftercompletingrepair 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo USBM-DSP Lv.2 Details
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-351
8
COPIER>OPTION>USER
USBI-DSP Lv.2 Details
8-352
COPIER>OPTION>USER
USBB-DSP Lv.2 Details Dis/hideofUSBBluetoothdevicedriver Tosetwhethertodisplay"Preferences>ExternalInterface> USBSettings>UseMEAPDriverforBluetoothDevice." When"0:Hide"isset,thisitemisnotdisplayed,andtheuser administratorcannotchangethesettingoftheMEAPdriverfor theUSBBluetoothdevice. Whenprohibitingtheuseradministratortochangethesetting of"UseMEAPDriverforUSBBluetoothDevice",set0afterthe specified setting is completed. 0to1 0:Hide,1:Display 0 Preferences>ExternalInterface>USBSettings>UseMEAP DriverforBluetoothDevice Dis/hideofUSBinfrareddevicedriver Tosetwhethertodisplay"Preferences>ExternalInterface> USBSettings>UseMEAPDriverforUSBInfraredDevice." Whenprohibitingtheuseradministratortochangethesetting of"UseMEAPDriverforUSBInfraredDevice,"set0afterthe specified setting is completed. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Preferences>ExternalInterface>USBSettings>UseMEAP DriverforUSBInfraredDevice -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CTCHKDSP Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Dis/hideofUSBinputdevicedriverset Tosetwhethertodisplay"Preferences>ExternalInterface> USBSettings>UseMEAPDriverforUSBInputDevice". Byselecting"0:Hide",theitemisnotdisplayed,andtheuser administratorcannotchangethesettingoftheMEAPdriverfor theUSBinputdevice. Whenprohibitingtheuseradministratortochangethesetting of"UseMEAPDriverforUSBInputDevice",set0afterthe specified setting is completed. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 1 Preferences>ExternalInterface>USBSettings>UseMEAP DriverforUSBInputDevice Display/hideofcounterprint Tosetwhethertodisplayorhide"PrintList"ontheCounter Checkscreen. Modelname,modelnumberinformation,countercheckdateand counterinformationcanbeoutputasatotalcountmanagement report. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 1 -
Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo USBR-DSP Lv.2 Details Usecase
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-352
8
COPIER>OPTION>USER
POL-SCAN Lv.1 Details
8-353 CST
COPIER>OPTION>CST
U1-NAME Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo U2-NAME Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Dis/hideofpprnameinpprsizegroupU1 Tosetwhethertodisplayorhidepapernameatpapersize groupU1detection. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Dis/hideofpprnameinpprsizegroupU2 Tosetwhethertodisplayorhidepapernameatpapersize groupU2detection. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Dis/hideofRightsManagementServerset When"1:Display"isset,theRightsManagementServerfunction screenisdisplayed. WhiletheRightsManagementServerfunctionisastandard feature,itispossibletohideifnotnecessary. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 T-8-64
8-353
8
COPIER>OPTION>CST
U3-NAME Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo U4-NAME Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-354
COPIER>OPTION>CST
ENV1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange SettingofEnvelopeCassetteENV1size TosetthesizeforEnvelopeCassetteENV1. WhenspecifyingthesizeforEnvelopeCassette 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 21to26 21:ISO-C5,22:COM10,23:MONARCH,24:DL,25:ISO-B5, 26:Notused 23 SettingofEnvelopeCassetteENV2size TosetthesizeforEnvelopeCassetteENV2. WhenspecifyingthesizeforEnvelopeCassette 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 21to26 21:ISO-C5,22:COM10,23:MONARCH,24:DL,25:ISO-B5, 26:Notused 22 -
Dis/hideofpprnameinpprsizegroupU3 Tosetwhethertodisplayorhidepapernameatpapersize groupU3detection. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Dis/hideofpprnameinpprsizegroupU4 Tosetwhethertodisplayorhidepapernameatpapersize groupU4detection. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ENV2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-354
8
COPIER>OPTION>CST
CST1-P1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST1-P2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST2-P1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-355
COPIER>OPTION>CST
CST2-P2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST3-P1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST3-P2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SettingofCassette2papersize TosetthepapersizeusedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:B5,1:EXEC USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>B5/EXECPaperSelection SettingofCassette3papersize TosetthepapersizeusedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:A5R,1:STMTR USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>A5R/STMTRPaperSelection SettingofCassette3papersize TosetthepapersizeusedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:B5,1:EXEC USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>B5/EXECPaperSelection -
SettingofCassette1papersize TosetthepapersizeusedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:A5R,1:STMTR USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>A5R/STMTRPaperSelection SettingofCassette1papersize TosetthepapersizeusedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:B5,1:EXEC USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>B5/EXECPaperSelection SettingofCassette2papersize TosetthepapersizeusedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:A5R,1:STMTR USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>A5R/STMTRPaperSelection -
8-355
8
COPIER>OPTION>CST
CST4-P1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST4-P2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-356
COPIER>OPTION>CST
CST1-U1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setcst1overseaspecialpprcategory1 Tosettheoverseasspecialpapercategory1usedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to43 0:A4-R/LTR-R,1to23:Notused,24:FLSC,25:A-FLS,36: Notused,27:E-OFI,28to29:Notused,30:A-LTRR,31to32: Notused,33:A-LGL,34:G-LGL,35:Notused,36:A-OFI,37: M-OFI,38to41:Notused,42:FA4,43:Notused 0 Setcst1overseaspecialpprcategory2 Tosettheoverseasspecialpapercategory2usedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to34 0:16K-R,1to22Notused,23:K-LGL-R,24to31Notused,32: G-LTRR,33to34Notused 0 -
SettingofCassette4papersize TosetthepapersizeusedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:A5R,1:STMTR USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>A5R/STMTRPaperSelection SettingofCassette4papersize TosetthepapersizeusedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:B5,1:EXEC USA:1,CountriesotherthanUSA:0 Preferences>PaperSettings>B5/EXECPaperSelection -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST1-U2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-356
8
COPIER>OPTION>CST
CST1-U3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-357
COPIER>OPTION>CST
CST2-U1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setcst2overseaspecialpprcategory1 Tosettheoverseasspecialpapercategory1usedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to43 0:A4-R/LTR-R,1to23:Notused,24:FLSC,25:A-FLS,36: Notused,27:E-OFI,28to29:Notused,30:A-LTRR,31to32: Notused,33:A-LGL,34:G-LGL,35:Notused,36:A-OFI,37: M-OFI,38to41:Notused,42:FA4,43:Notused 0 Setcst2overseaspecialpprcategory2 Tosettheoverseasspecialpapercategory2usedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to34 0:16K-R,1to22Notused,23:K-LGL-R,24to31Notused,32: G-LTRR,33to34Notused 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST1-U4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setcst1overseaspecialpprcategory3 Tosettheoverseasspecialpapercategory3usedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to31 0:B4/B5/LTR/16K,1to21Notused,22:K-LGL,23to28:Not used,29:A-LTR,30:Notused,31:G-LTR 0 Setcst1overseaspecialpprcategory4 Tosettheoverseasspecialpapercategory4usedinCassette1. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to28 0:LGL,1to27:Notused,28:B-OFI 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST2-U2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-357
8
COPIER>OPTION>CST
CST2-U3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-358
COPIER>OPTION>CST
CST3-U1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setcst3overseaspecialpprcategory1 Tosettheoverseasspecialpapercategory1usedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to43 0:A4-R/LTR-R,1to23:Notused,24:FLSC,25:A-FLS,36: Notused,27:E-OFI,28to29:Notused,30:A-LTRR,31to32: Notused,33:A-LGL,34:G-LGL,35:Notused,36:A-OFI,37: M-OFI,38to41:Notused,42:FA4,43:Notused 0 Setcst3overseasspecialpprcategory2 Tosettheoverseasspecialpapercategory2usedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to34 0:16K-R,1to22Notused,23:K-LGL-R,24to31Notused,32: G-LTRR,33to34Notused 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST2-U4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setcst2overseaspecialpprcategory3 Tosettheoverseasspecialpapercategory3usedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to31 0:B4/B5/LTR/16K,1to21Notused,22:K-LGL,23to28:Not used,29:A-LTR,30:Notused,31:G-LTR 0 Setcst2overseaspecialpprcategory4 Tosettheoverseasspecialpapercategory4usedinCassette2. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to28 0:LGL,1to27:Notused,28:B-OFI 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST3-U2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-358
8
COPIER>OPTION>CST
CST3-U3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-359
COPIER>OPTION>CST
CST4-U1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Setcst4overseasspecialpprcategory1 Tosettheoverseasspecialpapercategory1usedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to43 0:A4-R/LTR-R,1to23:Notused,24:FLSC,25:A-FLS,36: Notused,27:E-OFI,28to29:Notused,30:A-LTRR,31to32: Notused,33:A-LGL,34:G-LGL,35:Notused,36:A-OFI,37: M-OFI,38to41:Notused,42:FA4,43:Notused 0 Setcst4overseasspecialpprcategory2 Tosettheoverseasspecialpapercategory2usedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to34 0:16K-R,1to22Notused,23:K-LGL-R,24to31Notused,32: G-LTRR,33to34Notused 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST3-U4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setcst3overseasspecialpprcategory3 Tosettheoverseasspecialpapercategory3usedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to31 0:B4/B5/LTR/16K,1to21Notused,22:K-LGL,23to28:Not used,29:A-LTR,30:Notused,31:G-LTR 0 Setcst3overseasspecialpprcategory4 Tosettheoverseasspecialpapercategory4usedinCassette3. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to28 0:LGL,1to27:Notused,28:B-OFI 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST4-U2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-359
8
COPIER>OPTION>CST
CST4-U3 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-360 ACC
COPIER>OPTION>ACC
COIN Lv.1 Details Usecase Adj/set/operate method Caution Settingofchargemanagement Tosetchargingmanagementmethod. AtinstallationofCoinManager 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Incaseofsetting"3",if"0to2"ischangedto"3",thefollowingitems areautomaticallyset.Aftermakingachange,eventhough"3"isset to"0to2"again,theywillnotberestored. COPIER>OPTION>USER>CONTROL,AFN-PSWD=1 COPIER>OPTION>FNC-SW>DA-CNCT=1 COPIER>OPTION>DSPLY-SW>UI-BOX,UI-SEND,UI-FAX,UIEXT=0 IESettings>IEFunctionPriority=ON Preferences>Network>TCP/IPSettings>IPv4Settings>IP AddressRangeSettings>RX/PrintRange:PermitIPv4Address= ON Preferences>Network>TCP/IPSettings>IPv6Settings>IP AddressRangeSettings>RX/PrintRange:PermitIPv6Address= ON Preferences>Network>TCP/IPSettings>FTPPrintSettings>Use FTPPrinting=OFF Preferences>Network>TCP/IPSettings>IPPPrintSettings=ON Preferences>Network>SMBServerSettings>SMBPrinter Settings>UseSMB=ON FunctionSettings>Send>E-Mail/I-FaxSettings>Communication Settings>SMTPRX,POP=OFF Incaseofsetting"4",if"0to2"ischangedto"4",thefollowingitems areautomaticallyset.Aftermakingachange,eventhough"4"isset to"0to2"again,theywillnotberestored. COPIER>OPTION>USER>AFN-PSWD=1 COPIER>OPTION>DSPLY-SW>UI-BOX,UI-SEND,UI-FAX,UIEXT,UI-RSCAN,UI-EPRNT,UI-HOLD=0 ManagementSettings>DeviceManagement>DisplayLog=OFF 0to7 0:Nocharge 1:ChargewithCoinManager 2Chargewithremotecounter 3:ChargewithDA(onlyinJapan) 4:Chargewiththismachineitself 5:NewSCmode 6:Externalchargemode6 7:Externalchargemode7 0
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CST4-U4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setcst4overseasspecialpprcategory3 Tosettheoverseasspecialpapercategory3usedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to31 0:B4/B5/LTR/16K,1to21Notused,22:K-LGL,23to28:Not used,29:A-LTR,30:Notused,31:G-LTR 0 Setcst4overseasspecialpprcategory4 Tosettheoverseasspecialpapercategory4usedinCassette4. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to28 0:LGL,1to27:Notused,28:B-OFI 0 T-8-65
Display/adj/setrange
8-360
8
COPIER>OPTION>ACC
8-361
COPIER>OPTION>ACC
STPL-LMT Lv.2 Details Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SC-TYPE Lv.2 Details Usecase Adj/set/operate method Caution Display/adj/setrange SetNumberofsheetsforsaddlestitch Tosetthenumberofsheetsforsaddlestitch 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to3 3 SetofCoinManagersupportmachine TosetthemachinethatsupportstheCoinManager. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Donotusethissettingforthemachinesotherthantheonesthat supporttheCoinManager. 0to1 0:Machineinstalledinconveniencestores,1:Self-operatedcopy machine 0 -
Requiredtime Relatedservicemode COPIER>OPTION>USER>CONTROL COPIER>OPTION>FNC-SW>DA-CNCT COPIER>OPTION>DSPLY-SW>UI-BOX,UI-SEND,UI-FAX,UIEXT Relatedusermode FunctionSettings>Send>E-Mail/I-FaxSettings>Communication Settings Preferences>Network>TCP/IPSettings>DNSSettings>FTPPrint Settings Preferences>Network>TCP/IPSettings>DNSSettings>IPPPrint Settings Supplement/memo Controlcardcanbeusedwith"0:Nocharge". DA:DigitalAccessory DK-P SettingofPaperDeckpapersize Lv.1 Details TosetthepapersizeusedinthePaperDeck. Usecase Adj/set/operate 1)Enterthesettingvalue,andthenpressOKkey. method 2)TurnOFF/ONthemainpowerswitch. Caution Display/adj/setrange 0to2 0:A4,1:LTR,2:Notused Unit Appropriatetarget value Defaultvalue 0 Requiredtime Relatedservicemode Relatedusermode Supplement/memo CARD-SW ScreensetwhenCoinManagerconnected Lv.1 Details TosetcoinorcardthattheuserisurgedtoinsertontheControl PanelwhentheCoinManagerisconnected. Usecase Uponuser'srequest Adj/set/operate 1)Enterthesettingvalue,andthenpressOKkey. method 2)TurnOFF/ONthemainpowerswitch. Caution Display/adj/setrange 0to3 0:Coin,1:Card,2:Coinandcard,3:Card(forcustomization) Unit Appropriatetarget value Defaultvalue 0 Requiredtime Relatedservicemode Relatedusermode Supplement/memo -
8-361
8
COPIER>OPTION>ACC
OUT-TRAY Lv.1 Details Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CC-SPSW Lv.2 Details
8-362
COPIER>OPTION>ACC
USB-MSK Lv.1 Details Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UNIT-PRC Lv.2 Details Usecase Adj/set/operate method Caution Display/adj/setrange LimitforUSBhostusingcannel TosetthechannelthatcannotusetheUSBhost. 0to2 0:Notlimited,1:CH1,2:Notused 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0 SettingofCoinManagercurrencyunit TosetcurrencyunittobehandledwithCoinManager AtinstallationofCoinManager 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to6 0:Japaneseyen,1:Euro,2:Pound,3:SwissFranc.4:Dollar,5:No currencyunit(nofractionalunit),6:Nocurrencyunit(withfractional unit) 0 -
SetofThirdDeliveryTrayinstallation TosetwhethertheThirdDeliveryTrayisinstalled. WhentheThirdDeliveryTrayisinstalled,set"1". WheninstallingtheThirdDeliveryTray 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notinstalled,1:Installed 0 SupportsettingofcontrolcardI/F Tosetsupportlevelforcontrolcard(CCIV/CCV)interface. Tokeepprocessingperformanceofprinterengine,select"1:Priority onspeed". Tocorrectlystoptheoutputbytheupperlimitnumberofsheets, select"2:Priorityonupperlimitnumberofsheets". Uponuser'srequest(whenconnectingtotheexternalcounter managementsystemusingthecontrolcardinterface) 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Withpriorityonspeed,outputcannotbecorrectlystoppedbythe upperlimitnumberofsheets. Withpriorityontheupperlimitnumberofsheets,processing performanceoftheprinterengineisdecreaseddependingonpickup location. 0to2 0:Nosupport,1:Priorityonspeed,2:Priorityonupperlimitnumber ofsheets 0 -
Display/adj/setrange
8-362
8
COPIER>OPTION>ACC
IN-TRAY Lv.1 Details Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DA-PUCT Lv.2 Details
8-363
COPIER>OPTION>ACC
MIN-PRC Lv.1 Details SetofCoinManagerminimumprice TosettheminimumamounttobehandledwithCoinManager. Enter10whenspecifying10Japaneseyenastheminimumamount tobehandledwiththeCoinManagerthatsupportsJapaneseyen. Inthecasetospecify1to4(Euro/Pound/SwissFranc/Dollar)by goingthroughthefollowing:COPIER>OPTION>ACC>UNIT-PRC, entryisinfractionalunit.Entryof50indicates50cents($0.50). AtinstallationofCoinManager 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thismodeisenabledwhenselecting4forthefollowing:COPIER> OPTION>ACC>COIN. 0to9999 Accordingtothesettingvaluebythefollowing:COPIER>OPTION> ACC>UNIT-PRC. 10 COPIER>OPTION>ACC>COIN,UNIT-PRC Asforthechargingamount,itcausesanerrorifspecifyingthe valuethatissmallerthantheminimumcurrencyunitwithSettings/ Registrationmode.
SetofSecondDeliveryTrayinstallation TosetwhethertheSecondDeliveryTrayisinstalled. WhentheSecondDeliveryTrayisinstalled,set"1". WheninstallingtheSecondDeliveryTray 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notinstalled,1:Installed 0 Setpickup/deliverycomctnatDAcharge When a pickup and delivery notification error occurs due to network failure,etc.,theprintoperationmightbedonewithoutcharging. Thisistosetthenumberofsheetsthatcanbefedafterthemachine receivesAcksinglefromDA. Whenthevalueisdecreased,thenumberofprintstobemade withoutchargingisdecreased,buttheproductivitymightbelowered. Whenthevalueisincreased,theproductivityisnotlowered,butthe numberofprintstobemadewithoutchargingisincreased. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Asthesmallervalueisset,thenumberofprintstobemadewithout chargingisdecreased,buttheproductivitymightbelowered. 2to10 6 DA:DigitalAccessory
Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-363
8
COPIER>OPTION>ACC
MAX-PRC Lv.1 Details
8-364
COPIER>OPTION>ACC
SRL-SPSW Lv.1 Details SettingofSerialI/FKitsupport TosetthesupportleveloftheSerialInterfaceKit. Tokeepprocessingperformanceofprinterengine,select"1:Priority onspeed". Tocorrectlystoptheoutputbytheupperlimitnumberofsheets, select"2:Priorityonupperlimitnumberofsheets". AtinstallationofSerialInterfaceKit 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Withpriorityonspeed,outputcannotbecorrectlystoppedbythe upperlimitnumberofsheets. Withpriorityontheupperlimitnumberofsheets,processing performanceoftheprinterengineisdecreaseddependingonpickup location. 0to2 0:Nosupport,1:Priorityonspeed,2:Priorityonupperlimitnumber ofsheets 0 SetofinformationoutputatCCVcontrol Tosettheinformationoutputoflarge/smallpapersizeandcolor/B&W atCCVcontrol. Wheninstallingamachinewhichrequirestheinformationonlarge/ smallpapersizeandcolor/B&W 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Notoutput,1:Output 0 T-8-66
Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
SetofCoinManagermaximumprice TosetthemaximumamounttobehandledwithCoinManager. Enter8800whenspecifying8800Japaneseyenasthemaximum amounttobehandledwiththeCoinManagerthatsupportsJapanese yen. Inthecasetospecify1to4(Euro/Pound/SwissFranc/Dollar)by goingthroughthefollowing:COPIER>OPTION>ACC>UNIT-PRC, entryisinfractionalunit.Entryof50indicates50cents($0.50). AtinstallationofCoinManager 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. Thismodeisenabledwhenselecting4forthefollowing:COPIER> OPTION>ACC>COIN. 0to9999 Accordingtothesettingvaluebythefollowing:COPIER>OPTION> ACC>UNIT-PRC. 8800 COPIER>OPTION>ACC>COIN,UNIT-PRC Asforchargingamount,itcausesanerrorifspecifyingthevaluethat islargerthanthemaximumcurrencyunitwithSettings/Registration mode. Manualadjofvoicerecognizemicrophone Tomanuallyadjustthesoundreceivinglevel(sensitivity)ofthe connectedvoicerecognitionmicrophone. Microphonesensitivityisautomaticallytunedinusermode;however, adjustitmanuallyasneeded. Whenthesensitivityofmicrophoneisnotimprovedbyautotuning 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to255 128 Preferences>Accessibility>VoiceNavigationSettings>Tune Microphone -
Display/adj/setrange
Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CC-EXT Lv.1 Details Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Usecase Adj/set/operate method Caution Display/adj/setrange Unit Appropriatetarget value Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-364
8
INT-FACE
COPIER>OPTION>INT-FACE
IMG-CONT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-365
COPIER>OPTION>INT-FACE
AP-ACCNT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AP-CODE Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo JobdeptIDsetofappliw/printserver TosetdepartmentIDtotheprintjobfromtheapplication(PrintMe) equippedwithprintserver. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to9999999 0 Setoutputpasscodefromprintserver Tosetthepasscodeforoutputfromprintserver. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to9999999 0 -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo AP-OPT Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
Connectionsettingofprintserver Tosetconnectionwithprintserver. Atinstallation 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to5 0:Normalmode(Printservernotconnected),1,2:Notused,3: Printserverconnected,4,5:Notused 0 Outputsetofappliwithprintserver Tosetwhethertopermitoutputfromtheapplication(PrintMe) equippedwithprintserver. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to2 0: Permits the specified account only, 1: Permits, 2: Permits the specified department ID only 0 -
8-365
8
COPIER>OPTION>INT-FACE
NWCT-TM Lv.2 Details
8-366 LCNS-TR
COPIER>OPTION>LCNS-TR
ST-SEND Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofSENDfunction TodisplayinstallationstateofSENDfunctionwhentransferis disabled. WhencheckingwhetherSENDfunctionisinstalled 1)SelectST-SEND. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicensekey isdisplayedunderTR-SEND. When operation finished normally: OK! 0 TrnslicensekeydisofSENDfunction TodisplaytransferlicensekeytouseSENDfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-SEND. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-SEND. 24digits -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CNT-TYPE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Timeoutsettingofnetworkconnection Tosetthetimetokeepnetworkconnectionbetweenthis machineandthePCapplication(keep-alivesetting). Asthevalueisincrementedby1,thetimeisincreasedby1 minute. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to5 1minute 5 ExpectedPCapplication:Networkprintapplication,E-mail function,cascadecopy,MEAPnetworkapplication,etc. Connectionsettingofprintserver Toswitchprintservertobeconnected. SpecifyprintserverwithEFIcontrollerID. Atinstallationofprintserver 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 1to999 443:ColorPASS-GX300,444:imagePASS-B1 1 T-8-67
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-SEND Lv.2 Details Usecase Adj/set/operatemethod
8-366
8
COPIER>OPTION>LCNS-TR
ST-ENPDF Lv.2 Details Usecase Adj/set/operatemethod
8-367
COPIER>OPTION>LCNS-TR
ST-SPDF Lv.2 Details Usecase Adj/set/operatemethod InstalstatedisofSENDsearchblPDFTX TodisplayinstallationstateoftransmissionfunctionforSEND searchablePDFwhentransferisdisabled. WhencheckingwhethertransmissionfunctionforSEND searchablePDFisinstalled 1)SelectST-SPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-SPDF. When operation finished normally: OK! 0 TrnslcnskeydisofSENDsearchblPDFTX Todisplaytransferlicensekeytousetransmissionfunctionfor SENDsearchablePDFwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-SPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-SPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-ENPDF Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofSENDencryPDFTX TodisplayinstallationstateoftransmissionfunctionforSEND encryptionPDFwhentransferisdisabled. WhencheckingwhethertransmissionfunctionforSEND encryptionPDFisinstalled 1)SelectST-ENPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicensekey isdisplayedunderTR-ENPDF. When operation finished normally: OK! 0 TrnslicensekeydisofSENDencryPDFTX Todisplaytransferlicensekeytousetransmissionfunctionfor SENDencryptionPDFwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-ENPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-ENPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-SPDF Lv.2 Details Usecase Adj/set/operatemethod
8-367
8
COPIER>OPTION>LCNS-TR
ST-EXPDF Lv.2 Details Usecase Adj/set/operatemethod
8-368
COPIER>OPTION>LCNS-TR
ST-PDFDR Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofPDFdirectprint TodisplayinstallationstateofPDFdirectprintfunctionwhen transferisdisabled. WhencheckingwhetherPDFdirectprintfunctionisinstalled. 1)SelectST-PDFDR. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PDFDR. When operation finished normally: OK! 0 TrnslicensekeydisofPDFdirectprint TodisplaytransferlicensekeytousePDFdirectprintfunction whentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PDFDR. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PDFDR. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-EXPDF Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofPDFExpansionKit TodisplayinstallationstateofPDFExpansionKitwhentransfer isdisabled. WhencheckingwhetherPDFExpansionKitisinstalled 1)SelectST-EXPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-EXPDF. When operation finished normally: OK! 0 PDFExpansionKit:EncryptionPDF+SearchablePDF TrnslicensekeydisofPDFExpnsnKit TodisplaytransferlicensekeytousePDFExpansionKitwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-EXPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-EXPDF. ThismodeisenabledifSENDfunctionisinstalledforJapan. 24digits PDFExpansionKit:EncryptionPDF+SearchablePDF
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PDFDR Lv.2 Details Usecase Adj/set/operatemethod
8-368
8
COPIER>OPTION>LCNS-TR
ST-SCR Lv.2 Details Usecase Adj/set/operatemethod
8-369
COPIER>OPTION>LCNS-TR
ST-HDCLR Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofHDDencry/delete TodisplayinstallationstateofHDDencryption/datacomplete deletionfunctionwhentransferisdisabled. WhencheckingwhetherHDDencryption/datacompletedeletion functionisinstalled 1)SelectST-HDCLR. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-HDCLR. When operation finished normally: OK! 0 TrnslicensekeydisofHDDencry/delete TodisplaytransferlicensekeytouseHDDencryption/data completedeletionfunctionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-HDCLR. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-HDCLR. Thismodeisenabledifthereis"3DES+USH-H"Board. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-SCR Lv.2 Details Usecase Adj/set/operatemethod
Installstatedisofencrysecureprint Todisplayinstallationstateofencryptionsecureprintfunction whentransferisdisabled. Whencheckingwhetherencryptionsecureprintfunctionis installed. 1)SelectST-SCR. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-SCR. When operation finished normally: OK! 0 Trnslicensekeydisofencrysecurepnt Todisplaytransferlicensekeytouseencryptionsecureprint functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-SCR. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-SCR. Thismodeisenabledifthereis"3DES+USH-H"Board. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-HDCLR Lv.2 Details Usecase Adj/set/operatemethod
8-369
8
COPIER>OPTION>LCNS-TR
ST-BRDIM Lv.2 Details Usecase Adj/set/operatemethod
8-370
COPIER>OPTION>LCNS-TR
ST-VNC Lv.2 Details Usecase Adj/set/operatemethod InstallationstatedisplayofVNC TodisplayinstallationstateofVNCfunctionwhentransferis disabled. WhencheckingwhetherVNCfunctionisinstalled 1)SelectST-VNC. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-VNC. When operation finished normally: OK! 0 TransferlicensekeydisplayofVNC TodisplaytransferlicensekeytouseVNCfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-VNC. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-VNC. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-BRDIM Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisplayofBarDIMM TodisplayinstallationstateofBarDIMMwhentransferis disabled. WhencheckingwhetherBarDIMMisinstalled 1)SelectST-BRDIM. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-BRDIM. When operation finished normally: OK! 0 TransferlicensekeydisofBarDIMM TodisplaytransferlicensekeytouseBarDIMMwhentransferis disabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-BRDIM. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-BRDIM. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-VNC Lv.2 Details Usecase Adj/set/operatemethod
8-370
8
COPIER>OPTION>LCNS-TR
ST-WEB Lv.2 Details Usecase Adj/set/operatemethod
8-371
COPIER>OPTION>LCNS-TR
ST-HRPDF Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofhighcompressPDF TodisplayinstallationstateofhighcompressionPDFfunction whentransferisdisabled. WhencheckingwhetherhighcompressionPDFfunctionis installed. 1)SelectST-HRPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-HRPDF. When operation finished normally: OK! 0 TrnslcnskeydisofhighcompressPDF TodisplaytransferlicensekeytousehighcompressionPDF functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-HRPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-HRPDF. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-WEB Lv.2 Details Usecase Adj/set/operatemethod
InstallationstatedisofWebbrowser TodisplayinstallationstateofWebbrowserwhentransferis disabled. WhencheckingwhetherWebbrowserisinstalled. 1)SelectST-WEB. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-WEB. When operation finished normally: OK! 0 TransferlicensekeydisofWebbrowser TodisplaytransferlicensekeytouseWebbrowserwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-WEB. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-WEB. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-HRPDF Lv.2 Details Usecase Adj/set/operatemethod
8-371
8
COPIER>OPTION>LCNS-TR
ST-TRSND Lv.2 Details Usecase Adj/set/operatemethod
8-372
COPIER>OPTION>LCNS-TR
ST-WTMRK Lv.2 Details Usecase Adj/set/operatemethod Installstatedisofwatermarkfunction Todisplayinstallationstateofwatermarkprintfunctionwhen transferisdisabled. Whencheckingwhetherwatermarkprintfunctionisinstalled. 1)SelectST-WTMRK. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-WTMRK. When operation finished normally: OK! 0 Trnslicensekeydisofwatermarkfunc Todisplaytransferlicensekeytousewatermarkprintfunction whentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-WTMRK. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-WTMRK. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-TRSND Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisoftrialSENDfunction TodisplayinstallationstateoftrialSENDfunctionwhentransfer isdisabled. WhencheckingwhethertrialSENDfunctionisinstalled. 1)SelectST-TRSND. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-TRSND. When operation finished normally: OK! 0 TransferlicensekeydisoftrialSEND TodisplaytransferlicensekeytousetrialSENDfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-TRSND. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-TRSND. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-WTMRK Lv.2 Details Usecase Adj/set/operatemethod
8-372
8
COPIER>OPTION>LCNS-TR
ST-TSPDF Lv.2 Details Usecase Adj/set/operatemethod
8-373
COPIER>OPTION>LCNS-TR
ST-USPDF Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofPDFTXw/usersign TodisplayinstallationstateofPDFtransmissionfunctionwith usersignaturewhentransferisdisabled. WhencheckingwhetherPDFtransmissionfunctionwithuser signatureisinstalled 1)SelectST-USPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-USPDF. When operation finished normally: OK! 0 TrnslcnskeydisofPDFTXw/usersign TodisplaytransferlicensekeytousePDFtransmissionfunction withusersignaturewhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-USPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-USPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-TSPDF Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofPDFTXw/timestamp TodisplayinstallationstateofPDFtransmissionfunctionwith timestampwhentransferisdisabled. WhencheckingwhetherPDFtransmissionfunctionwithtime stampisinstalled. 1)SelectST-TSPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-TSPDF. When operation finished normally: OK! 0 LicensekeydisofPDFTXw/timestamp TodisplaytransferlicensetousePDFtransmissionfunctionwith timestampwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-TSPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-TSPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-USPDF Lv.2 Details Usecase Adj/set/operatemethod
8-373
8
COPIER>OPTION>LCNS-TR
ST-DVPDF Lv.2 Details Usecase Adj/set/operatemethod
8-374
COPIER>OPTION>LCNS-TR
ST-SCPDF Lv.2 Details Usecase Adj/set/operatemethod InstalstatedisofscalablePDFTXfunc TodisplayinstallationstateofscalablePDFtransmission functionwhentransferisdisabled. WhencheckingwhetherscalablePDFtransmissionfunctionis installed 1)SelectST-SCPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-SCPDF. When operation finished normally: OK! 0 TrnslicensekeydisofscalablePDFTX TodisplaytransferlicensekeytousescalablePDFtransmission functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-SCPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-SCPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-DVPDF Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofPDFTXw/devcsign TodisplayinstallationstateofPDFtransmissionfunctionwith devicesignaturewhentransferisdisabled. WhencheckingwhetherPDFtransmissionfunctionwithdevice signatureisinstalled 1)SelectST-DVPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-DVPDF. When operation finished normally: OK! 0 TrnslcnskeydisofPDFTXw/devcsign TodisplaytransferlicensekeytousePDFtransmissionfunction withdevicesignaturewhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-DVPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-DVPDF. ThismodeisenabledifSENDfunctionisinstalled. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-SCPDF Lv.2 Details Usecase Adj/set/operatemethod
8-374
8
COPIER>OPTION>LCNS-TR
ST-AMS Lv.2 Details Usecase Adj/set/operatemethod
8-375
COPIER>OPTION>LCNS-TR
ST-ERDS Lv.2 Details Usecase Adj/set/operatemethod InstalstatedisofE-RDS3rdptyexpnsn Todisplayinstallationstateofthirdpartyexpansionfunctionof E-RDSwhentransferisdisabled. WhencheckingwhetherthirdpartyexpansionfunctionofE-RDS isinstalled 1)SelectST-ERDS. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-ERDS. When operation finished normally: OK! 0 Thirdpartyexpansionfunction:Afunctiontosendchargecounter tothethirdparty'schargeserver. LicensekeydisofE-RDS3rdptyexpnsn Todisplaytransferlicensekeytousethirdpartyexpansion functionofE-RDSwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-ERDS. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-ERDS. 24digits Thirdpartyexpansionfunction:Afunctiontosendchargecounter tothethirdparty'schargeserver.
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-AMS Lv.2 Details Usecase Adj/set/operatemethod
InstallationstatedisplayofACQ TodisplayinstallationstateofACQwhentransferisdisabled. WhencheckingwhetherACQisinstalled 1)SelectST-AMS. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-AMS. When operation finished normally: OK! 0 TransferlicensekeydisplayofACQ TodisplaytransferlicensekeytouseACQwhentransferis disabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-AMS. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-AMS. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-ERDS Lv.2 Details Usecase Adj/set/operatemethod
8-375
8
COPIER>OPTION>LCNS-TR
ST-PS Lv.2 Details Usecase Adj/set/operatemethod
8-376
COPIER>OPTION>LCNS-TR
ST-PCL Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisplayofPCLfunction TodisplayinstallationstateofPCLfunctionwhentransferis disabled. WhencheckingwhetherPCLfunctionisinstalled 1)SelectST-PCL. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PCL. When operation finished normally: OK! 0 TransferlicensekeydisofPCLfunction TodisplaytransferlicensekeytousePCLfunctionwhentransfer isdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PCL. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PCL. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PS Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisplayofPSfunction TodisplayinstallationstateofPSfunctionwhentransferis disabled. WhencheckingwhetherPSfunctionisinstalled 1)SelectST-PS. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PS. When operation finished normally: OK! 0 TransferlicensekeydisofPSfunction TodisplaytransferlicensekeytousePSfunctionwhentransfer isdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PS. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PS. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PCL Lv.2 Details Usecase Adj/set/operatemethod
8-376
8
COPIER>OPTION>LCNS-TR
ST-PSLI5 Lv.2 Details Usecase Adj/set/operatemethod
8-377
COPIER>OPTION>LCNS-TR
ST-LIPS5 Lv.2 Details Usecase Adj/set/operatemethod InstallstateofLIPSLX(UFRII)&LIPS4 TodisplayinstallationstateofLIPSLX(UFRIIforoutsideJapan) andLIPS4functionswhentransferisdisabled. WhencheckingwhetherLIPSLX(UFRII)andLIPS4functions areinstalled 1)SelectST-LIPS5. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-LIPS5. When operation finished normally: OK! 0 LcnskeydisofLIPSLX(UFRII)&LIPS4 TodisplaytransferlicensekeytouseLIPSLX(UFRIIforoutside Japan)andLIPS4functionswhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-LIPS5. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-LIPS5. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PSLI5 Lv.2 Details Usecase Adj/set/operatemethod
InstalstateofPS/LIPS4/LIPSLX(UFRII) TodisplayinstallationstateofPS/LIPS4/LIPSLX(UFRIIfor outsideJapan)functionwhentransferisdisabled. WhencheckingwhetherPS/LIPS4/LIPSLX(UFRII)functionis installed 1)SelectST-PSLI5. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PSLI5. When operation finished normally: OK! 0 LcnskeydisofPS/LIPS4/LIPSLX(UFRII) TodisplaytransferlicensekeytousePS/LIPS4/LIPSLX(UFR IIforoutsideJapan)functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PSLI5. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PSLI5. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-LIPS5 Lv.2 Details Usecase Adj/set/operatemethod
8-377
8
COPIER>OPTION>LCNS-TR
ST-LIPS4 Lv.2 Details Usecase Adj/set/operatemethod
8-378
COPIER>OPTION>LCNS-TR
ST-PSPCL Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofPS/PCLfunction TodisplayinstallationstateofPS/PCLfunctionwhentransferis disabled. WhencheckingwhetherPS/PCLfunctionisinstalled 1)SelectST-PSPCL. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PSPCL. When operation finished normally: OK! 0 TransferlicensekeydisofPS/PCLfunc TodisplaytransferlicensekeytousePS/PCLfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PSPCL. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PSPCL. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-LIPS4 Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofLIPSIVfunction TodisplayinstallationstateofLIPSIVfunctionwhentransferis disabled. WhencheckingwhetherLIPSIVfunctionisinstalled 1)SelectST-LIPS4. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-LIPS4. When operation finished normally: OK! 0 TransferlicensekeydisplayofLIPSIV TodisplaytransferlicensekeytouseLIPSIVfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-LIPS4. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-LIPS4. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PSPCL Lv.2 Details Usecase Adj/set/operatemethod
8-378
8
COPIER>OPTION>LCNS-TR
ST-PCLUF Lv.2 Details Usecase Adj/set/operatemethod
8-379
COPIER>OPTION>LCNS-TR
ST-PSLIP Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofPS/LIPSfunction TodisplayinstallationstateofPS/LIPSfunctionwhentransferis disabled. WhencheckingwhetherPS/LIPSfunctionisinstalled 1)SelectST-PSLIP. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PSLIP. When operation finished normally: OK! 0 TransferlicensekeydisofPS/LIPSfunc TodisplaytransferlicensekeytousePS/LIPSfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PSLIP. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PSLIP. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PCLUF Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofPCL/UFRfunction TodisplayinstallationstateofPCL/UFRfunctionwhentransferis disabled. WhencheckingwhetherPCL/UFRfunctionisinstalled 1)SelectST-PCLUF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PCLUF. When operation finished normally: OK! 0 TransferlicensekeydisofPCL/UDRfunc TodisplaytransferlicensekeytousePCL/UFRfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PCLUF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PCLUF. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PSLIP Lv.2 Details Usecase Adj/set/operatemethod
8-379
8
COPIER>OPTION>LCNS-TR
ST-PSPCU Lv.2 Details Usecase Adj/set/operatemethod
8-380
COPIER>OPTION>LCNS-TR
ST-LXUFR Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofLIPSLX(UFRII)func TodisplayinstallationstateofLIPSLX(UFRIIforoutsideJapan) functionwhentransferisdisabled. WhencheckingwhetherLIPSLX(UFRll)functionisinstalled 1)SelectST-LXUFR. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-LXUFR. When operation finished normally: OK! 0 TrnslicensekeydisofLIPSLX(UFRII) TodisplaytransferlicensekeytouseLIPSLX(UFRllforoutside Japan)functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-LXUFR. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-LXUFR. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-PSPCU Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofPS/PCL/UFRfunc TodisplayinstallationstateofPS/PCL/UFRfunctionwhen transferisdisabled. WhencheckingwhetherPS/PCL/UFRfunctionisinstalled 1)SelectST-PSPCU. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-PSPCU. When operation finished normally: OK! 0 TransferlicensekeydisofPS/PCL/UFR TodisplaytransferlicensekeytousePS/PCL/UFRfunction whentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-PSPCU. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-PSPCU. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-LXUFR Lv.2 Details Usecase Adj/set/operatemethod
8-380
8
COPIER>OPTION>LCNS-TR
ST-HDCR2 Lv.2 Details Usecase Adj/set/operatemethod
8-381
COPIER>OPTION>LCNS-TR
ST-USB-M Lv.2 Details Usecase Adj/set/operatemethod Installstatedisofprint/savefromUSB Todisplayinstallationstateofprint/savefunctionfrommemory mediawhentransferisdisabled. Whencheckingwhetherprint/savefunctionfrommemorymedia isinstalled 1)SelectST-USB-M. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-USB-M. When operation finished normally: OK! 0 Licensekeydisofprint/savefromUSB Todisplaytransferlicensekeytouseprint/savefunctionfrom memorymediaonanotherMFPwhentransferisdisabled WhenreplacingHDD Whenreplacingthedevice 1)SelectST-USB-M. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-USB-M. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-HDCR2 Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofHDDdeletefunction TodisplayinstallationstateofHDDdatacompletedeletion functionwhentransferisdisabled. WhencheckingwhetherHDDdatacompletedeletionfunctionis installed 1)SelectST-HDCR2. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-HDCR2. When operation finished normally: OK! 0 TrnslicensekeydisofHDDdeletefunc TodisplaytransferlicensekeytouseHDDdatacomplete deletionfunctionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-HDCR2. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-HDCR2. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-USB-M Lv.2 Details Usecase Adj/set/operatemethod
8-381
8
COPIER>OPTION>LCNS-TR
ST-MOBIL Lv.2 Details Usecase Adj/set/operatemethod
8-382
COPIER>OPTION>LCNS-TR
ST-JBLK Lv.2 Details Usecase Adj/set/operatemethod Installstatedisofinfoembeddingfunc Todisplayinstallationstateofinformationembeddingfunction whentransferisdisabled. Whencheckingwhetherinformationembeddingfunctionis installed 1)SelectST-JBLK. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-JBLK. When operation finished normally: OK! 0 Trnslicensekeydisofinfoembedfunc Todisplaytransferlicensekeytouseinformationembedding functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-JBLK. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-JBLK. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-MOBIL Lv.2 Details Usecase Adj/set/operatemethod
Installstatedisofmobilelinkfunc Todisplayinstallationstateofmobilecollaboration(mobileprint) functionwhentransferisdisabled. Whencheckingwhethermobilecollaborationfunctionisinstalled 1)SelectST-MOBIL. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-MOBIL. When operation finished normally: OK! 0 Licensekeydisofmobilelinkfunc Todisplaytransferlicensekeytousemobilecollaboration(mobile print)functionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-MOBIL. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-MOBIL. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-JBLK Lv.2 Details Usecase Adj/set/operatemethod
8-382
8
COPIER>OPTION>LCNS-TR
ST-AFAX Lv.2 Details Usecase Adj/set/operatemethod
8-383
COPIER>OPTION>LCNS-TR
ST-REPDF Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofPDFw/readerextsn TodisplayinstallationstateofPDFfunctionwithreaderextension whentransferisdisabled. WhencheckingwhetherPDFfunctionwithreaderextensionis installed 1)SelectST-REPDF. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-REPDF. When operation finished normally: OK! 0 TrnslcnskeydisofPDFw/readerextsn TodisplaytransferlicensekeytousePDFfunctionwithreader extensionwhentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-REPDF. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-REPDF. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-AFAX Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofAirFAXclientfunc TodisplayinstallationstateofAirFAXclientfunctionwhen transferisdisabled. WhencheckingwhetherAirFAXclientfunctionisinstalled 1)SelectST-AFAX. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-AFAX. When operation finished normally: OK! 0 TrnslicensekeydisofAirFAXclient TodisplaytransferlicensekeytouseAirFAXclientfunctionwhen transferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-AFAX. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-AFAX. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-REPDF Lv.2 Details Usecase Adj/set/operatemethod
8-383
8
COPIER>OPTION>LCNS-TR
ST-OOXML Lv.2 Details Usecase Adj/set/operatemethod
8-384
COPIER>OPTION>LCNS-TR
ST-XPS Lv.2 Details Usecase Adj/set/operatemethod InstallstatedisofXPSdirectprint TodisplayinstallationstateofXPSdirectprintfunctionwhen transferisdisabled. WhencheckingwhetherXPSdirectprintfunctionisinstalled 1)SelectST-XPS. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-XPS. When operation finished normally: OK! 0 TrnslcnskeydisofXPSdirectprint TodisplaytransferlicensekeytouseXPSdirectprintfunction whentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-XPS. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-XPS. 24digits T-8-68
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-OOXML Lv.2 Details Usecase Adj/set/operatemethod
InstallstatedisofOOXMLsendfunction TodisplayinstallationstateofOOXMLsendfunctionwhen transferisdisabled. WhencheckingwhetherOOXMLsendfunctionisinstalled 1)SelectST-OOXML. 2)Enter0,andthenpressOKkey. Wheninstallationhasbeencompleted,thetransferlicense keyisdisplayedunderTR-OOXML. When operation finished normally: OK! 0 TrnslcnskeydisofOOXMLsendfunction TodisplaytransferlicensekeytouseOOXMLsendfunction whentransferisdisabled. WhenreplacingHDD Whenreplacingthedevice 1)SelectST-OOXML. 2)Enter0,andthenpressOKkey. ThetransferlicensekeyisdisplayedunderTR-OOXML. 24digits -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-XPS Lv.2 Details Usecase Adj/set/operatemethod
8-384
8
COPIER
TEST
PG
COPIER>TEST>PG
TYPE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-385
COPIER>TEST>PG
TXPH Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Settingoftestprintimagemode Tosettheimagemodeatthetimeoftestprintoutput. Thismodeisenabledfortestprintonly. Attroubleanalysis Enterthesettingvalue,andthenpressOKkey. 0to6 0:Errordiffusion 1:Lowscreenrulingscreen(approx.133to190lines) 2:Highscreenrulingscreen(approx.200to268lines) 3:Copyscreen(approx.220lines) 4:REOSscreen(noscreenstructure) 5to6:Notused Imagecorrectiontableuseattestprint Tosetwhethertousetheimagecorrectiontableatthetimeof testprintoutput. Attroubleanalysis Enterthesettingvalue,andthenpressOKkey. 0to1 0:Used,1:Notused -
Testprint Toexecutethetestprint. Attroubleanalysis Enterthesettingvalue,andthenpressOKkey. Testprintisexecuted. Besuretoreturnthevalueto0afterthetestprintoutput. 0to100 0:ImagefromCCD(normalprint) 1to3:ForR&Duse 4:16gradations 5:Halftoneforallareas 6:Grid 7to9:ForR&Duse 10:MCYBkhorizontalline 11:ForR&Duse 12:YMCBk64gradations 13:ForR&Duse 14:Fullcolor16gradations 15to100:ForR&Duse 0 Severalseconds -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo THRU Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-385
8
COPIER>TEST>PG
DENS-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DENS-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-386
COPIER>TEST>PG
DENS-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COLOR-Y Lv.1 Details AdjofBkcolordensityattestprint ToadjustBkcolordensitywhenperformingtestprint(TYPE=5). Asthevalueisincreased,thedensitybecomeshigher. Attestprint(TYPE=5) Enterthesettingvalue,andthenpressOKkey. 0to255 Ycoloroutputsettingattestprint TomakeasettingofYcoloroutputfortestprint. Thesettingisappliedtoalltypes. Whensetting"COLOR-Y"to1andotheritemsto"0",asingleY colorisoutput. Attestprint Enterthesettingvalue,andthenpressOKkey. 0to1 0:Notoutput,1:Output -
AdjofYcolordensityattestprint ToadjustYcolordensitywhenperformingtestprint(TYPE=5). Asthevalueisincreased,thedensitybecomeshigher. Attestprint(TYPE=5) Enterthesettingvalue,andthenpressOKkey. 0to255 AdjofMcolordensityattestprint ToadjustMcolordensitywhenperformingtestprint(TYPE=5). Asthevalueisincreased,thedensitybecomeshigher. Attestprint(TYPE=5) Enterthesettingvalue,andthenpressOKkey. 0to255 AdjofCcolordensityattestprint ToadjustCcolordensitywhenperformingtestprint(TYPE=5). Asthevalueisincreased,thedensitybecomeshigher. Attestprint(TYPE=5) Enterthesettingvalue,andthenpressOKkey. 0to255 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-386
8
COPIER>TEST>PG
COLOR-M Lv.1 Details
8-387
COPIER>TEST>PG
COLOR-K Lv.1 Details Bkcoloroutputsettingattestprint TomakeasettingofBkcoloroutputfortestprint. Thesettingisappliedtoalltypes. Whensetting"COLOR-K"to1andotheritemsto"0",asingleBk colorisoutput. Attestprint Enterthesettingvalue,andthenpressOKkey. 0to1 0:Notoutput,1:Output SettingofPGfullcolor/monocolor Tosetfortheoutputinfullcolor/monochromecolorwithPG. Whenseparating(identifying)thecausewhetherit'sduetocolor ormonochrome. Enterthesettingvalue,andthenpressOKkey. 0to1 0:Fullcolor,1:Monochromecolor -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo COLOR-C Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Mcoloroutputsettingattestprint TomakeasettingofMcoloroutputfortestprint. Thesettingisappliedtoalltypes. Whensetting"COLOR-M"to1andotheritemsto"0",asingleM colorisoutput. Attestprint Enterthesettingvalue,andthenpressOKkey. 0to1 0:Notoutput,1:Output Ccoloroutputsettingattestprint TomakeasettingofCcoloroutputfortestprint. Thesettingisappliedtoalltypes. Whensetting"COLOR-C"to1andotheritemsto"0",asingleC colorisoutput. Attestprint Enterthesettingvalue,andthenpressOKkey. 0to1 0:Notoutput,1:Output -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo F/M-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-387
8
COPIER>TEST>PG
PG-PICK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-388
COPIER>TEST>PG
FINISH Lv.1 Details Usecase Adj/set/operatemethod Accessoryprocessingfunctiontestprint Toexecutethetestprintrelatingtoaccessoryprocessing function. Whencheckingoperationofaccessoryprocessingfunction 1)EnterthenumberofsheetsforPG-QTY,andthenpressOK key. 2)Enterthesettingvalue,andthenpressOKkey. 3)PressStartbutton. Themachineoutputsatestprint. 0to99 0:N/A 1:Staple(front)*1 2:Staple(2points)*1 3:Staple(rear)*1 4:Booklet(saddlestitch)*1 5:Z-fold(singlesleeve)*1 6:2-fold*1 7:C-fold*2 8:V-fold*2 9:4-fold*2 10:Z-fold(out-3-fold)*2 11:Punch(InnerPuncher)*3 12:Multiple-holepunch*4 13:Shift*1 14to99:Spare(forfutureuse) *1Finisher,*2Multi-foldingmachine,*3InnerPuncher,*4 Multiple-holePuncher 0 COPIER>TEST>PG>PG-QTY T-8-69
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2-SIDE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PG-QTY Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settingoftestprintpickupcassette Tosetthepickupcassettefortestprintoutput. Attroubleanalysis Attestprintoutput Enterthesettingvalue,andthenpressOKkey. 1to8 1:Cassette1,2:Cassette2,3:Cassette3,4:Cassette4,5:Paper Deck,6:Multi-purposeTray,7to8:Notused SettingofPG2-sidedmode Toset1-sided/2-sidedprintforPGoutput. Attroubleanalysis Enterthesettingvalue,andthenpressOKkey. 0to1 0:1-sided,1:2-sided 0 SettingofPGoutputquantity TosetthenumberofsheetsforPGoutput. Attroubleanalysis Enterthesettingvalue,andthenpressOKkey. 1to999 1sheet 1 -
Caution Display/adj/setrange
8-388
8
NETWORK
COPIER>TEST>NETWORK
PING Lv.1 Details Usecase
8-389
COPIER>TEST>NETWORK
Lv.2 To set whether to only display the device configuration in the SystemMonitorscreenwhensupportingBMlinks. Whenthesettingisswitched,theStatusandLogarenot displayed. Usecase WhensupportingBMlinks Adj/set/operatemethod Enterthesettingvalue,andthenpressOKkey. Caution Display/adj/setrange 0to1 0:OrdinarySystemMonitorscreen 1: Screen in which only the device configuration is displayed Unit Appropriatetargetvalue Defaultvalue 0 Requiredtime Relatedservicemode Relatedusermode Supplement/memo IPV6-ADR SettingofPINGsendaddress(IPv6) Lv.1 Details TosettheIPv6addresstosendPING. WhenPINGissenttothisaddressbyCOPIER>TEST> NETWORK>PING-IP6,thenetworkconnectionconditioninthe IPv6environmentcanbechecked. Usecase Adj/set/operatemethod Enterthesettingvalue,andthenpressOKkey. Caution EnteraconsistentcharacterstringasanaddressofIPv6. Enteranaddresswithin39charactersincludinghexadecimal numbers(0-9,a-f)andaseparator(:). Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode COPIER>TEST>NETWORK>PING-IP6 Relatedusermode Supplement/memo Details
Networkconnectioncheck TocheckconnectionbetweenthismachineandTCP/IPnetwork. Whencheckingnetworkconnectionatthetimeofinstallation Atnetworkconnectionfailure Adj/set/operatemethod 1)TurnOFFthemainpowerswitch. 2)Connectthenetworkcabletothismachine,andthenturnON themainpowerswitch. 3)Informthesystemadministratoratuser'ssitethatinstallationof thismachineiscomplete,andaskfornetworksetting. 4)Askthesystemadministratortocheckthenetworkconnection, andchecktheremotehostaddressofPINGtransmissiontarget. 5)Selecttheitemandentertheremotehostaddress,andthen pressOKkeyandStartkey. OK:Connectionisnormal.Checkingprocedureiscomplete. NG:Connectionfailed.Gotostep6)ifthecableconnectionis OK.Incaseofcableconnectionfailure,connectagainandthen gotostep5). 6)Selecttheitemandenterloopbackaddress,andthenpressOK keyandStartkey. OK:TCP/IPsettingofthismachineisnormal.Gotostep7)to checkNIC. NG:TCP/IPsettingofthismachinehasfailure.Gotostep3)to checkthesettingagain. 7)Selecttheitemandenterthelocalhostaddress,andthenpress OKkey. OK:NetworksettingofthismachineandNICarenormal.Inform thesystemadministratorthatthetroubleisduetonetwork environmentandaskforcountermeasure. NG:Connectionfailure/faultwithNIC.CheckconnectionofNIC/ replaceNIC. Caution Display/adj/setrange 0.0.0.0to255.255.255.255 Atnormalstate:OK Atfailureoccurrence:NG Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Remotehostaddress:IPaddressofPCterminalinnetwork. Loopbackaddress:127.0.0.1.CheckingTCP/IPofthismachine isavailablebecausethesignalisreturnedbeforeNIC. NIC:Networkinterfaceboard Localhostaddress:IPaddressofthismachine BML-DISP SetSystemMonitorscrn:BMlinkssupport
8-389
8
COPIER>TEST>NETWORK
PING-IP6 Lv.1 Details
8-390
COPIER>TEST>NETWORK
IPSECINT Lv.1 Details InterrupttestofIPSecEncryptionBoard ToexecutetheinterrupttestofIPSecEncryptionBoard. Tocheckwhetherahardwarefailurehasoccurred. Usecase Whencheckingwhetherahardwarefailurehasoccurredtothe IPSecEncryptionBoard Adj/set/operatemethod Selecttheitem,andthenpressOKkey. Caution Display/adj/setrange Atnormalstate:OK Atfailureoccurrence:NG(0:Theboardcannotberecognized.1: Anerroroccurredtotheresult.) Unit Appropriatetargetvalue Defaultvalue Requiredtime Approx.3minutes Relatedservicemode Relatedusermode Supplement/memo T-8-70
PINGtransmissiontoIPv6address To send PING to the address specified by IPV6-ADR. ThenetworkconnectionconditionintheIPv6environmentcanbe checked. Usecase Adj/set/operatemethod Selecttheitem,andthenpressOKkey. Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode COPIER>TEST>NETWORK>IPV6-ADR Relatedusermode Supplement/memo IPSECPOL PollingtestofIPSecEncryptionBoard Lv.1 Details ToexecutepollingtestofIPSecEncryptionBoard. Tocheckwhetherahardwarefailurehasoccurred. Usecase Whencheckingwhetherahardwarefailurehasoccurredtothe IPSecEncryptionBoard Adj/set/operatemethod Selecttheitem,andthenpressOKkey. Caution Display/adj/setrange Atnormalstate:OK Atfailureoccurrence:NG(0:Theboardcannotberecognized.1: Anerroroccurredtotheresult.) Unit Appropriatetargetvalue Defaultvalue Requiredtime Approx.3minutes Relatedservicemode Relatedusermode Supplement/memo -
8-390
8
COPIER
COUNTER
TOTAL
COPIER>COUNTER>TOTAL
SERVICE1 Lv.1 Details
8-391
COPIER>COUNTER>TOTAL
COPY Lv.1 Details Totalcopycounter Tocountupwhenthepaperisdeliveredoutsidethemachine. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 PDLprintcounter Tocountupwhenthepaperisdeliveredoutsidethemachine accordingtothechargecounteratPDLprint. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SERVICE2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Service-purposedtotalcounter1 Tocountupwhenthepaperisdeliveredoutsidethemachine. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 Service-purposedtotalcounter2 Tocountupwhenthepaperisdeliveredoutsidethemachine. Largesize:2,smallsize:1 Ablanksheetisnotcounted. 0to99999999 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PDL-PRT Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-391
8
COPIER>COUNTER>TOTAL
FAX-PRT Lv.1 Details
8-392
COPIER>COUNTER>TOTAL
RPT-PRT Lv.1 Details Reportprintcounter Tocountupwhenthepaperisdeliveredoutsidethemachine accordingtothechargecounteratreportprint. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 2-sidedcopy/printcounter Tocountupwhenthepaperisdeliveredoutsidethemachine accordingtothechargecounterat2-sidedcopy/print. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BOX-PRT Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
FAXreceptionprintcounter Tocountupwhenthepaperisdeliveredoutsidethemachine accordingtothechargecounteratFAXreception. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 Inboxprintcounter Tocountupwhenthepaperisdeliveredoutsidethemachine accordingtothechargecounteratInboxprint. Largesize:1,smallsize:1 Ablanksheetisnotcounted. 0to99999999 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2-SIDE Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-392
8
COPIER>COUNTER>TOTAL
SCAN Lv.1 Details
8-393 PICK-UP
COPIER>COUNTER>PICK-UP
C1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Cassette1pickuptotalcounter Largesize:1,Smallsize:1 Numberofsheets Cassette2pickuptotalcounter Largesize:1,Smallsize:1 Numberofsheets Cassette3pickuptotalcounter Largesize:1,Smallsize:1 Numberofsheets -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
C2 Lv.1
C3 Lv.1
8-393
8
COPIER>COUNTER>PICK-UP
C4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-394
COPIER>COUNTER>PICK-UP
2-SIDE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2-sidedpickuptotalcounter Largesize:1,Smallsize:1 Numberofsheets T-8-72
MF Lv.1
DK Lv.1
8-394
8
FEEDER
COPIER>COUNTER>FEEDER
FEED Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DFOP-CNT Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DADForiginalpickuptotalcounter
8-395 JAM
COPIER>COUNTER>JAM
TOTAL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FEEDER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SORTER Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Printertotaljamcounter Whencheckingthetotaljamcounterofprinter Numberoftimes Feedertotaljamcounter Whencheckingthetotaljamcounteroffeeder Numberoftimes Finishertotaljamcounter When checking the total jam counter of finisher Numberoftimes -
8-395
8
COPIER>COUNTER>JAM
2-SIDE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo C1 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-396
COPIER>COUNTER>JAM
C2 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LeftDeckjamcounter Whencheckingthejamcounterofmachine'sLeftDeck Numberoftimes Cassette3pickupjamcounter Whencheckingthejamcounterofmachine'sCassette3 Numberoftimes Cassette4pickupjamcounter Whencheckingthejamcounterofmachine'sCassette4 Numberoftimes -
C3 Lv.1
C4 Lv.1
8-396
8
COPIER>COUNTER>JAM
DK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-397 MISC
COPIER>COUNTER>MISC
T-SPLY-Y Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo T-SPLY-M Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo T-SPLY-C Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Ytonersupplycounter NumberofYcolortonersupplyblocks. CountedforeveryonerotationofTonerStirringScrew. Whencheckingtheusagestatusoftoner Numberofblocks 0 Mtonersupplycounter NumberofMcolortonersupplyblocks. CountedforeveryonerotationofTonerStirringScrew. Whencheckingtheusagestatusoftoner Numberofblocks 0 Ctonersupplycounter NumberofCcolortonersupplyblocks. CountedforeveryonerotationofTonerStirringScrew. Whencheckingtheusagestatusoftoner Numberofblocks 0 -
8-397
8
COPIER>COUNTER>MISC
T-SPLY-K Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ALLPW-ON Lv.1 Details
8-398
COPIER>COUNTER>MISC
ST-NDL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ENT-PTH Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRAY-CHA Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Stapleneedlecounter:Fin-A1/C1 Tocounttheuseofthestapleneedle. Numberoftimes Entrancepaperpathcounter:Fin-C1 Entrancepaperpathcounter Numberofsheets Traychangecounter:Fin-C1 Traychangecounter Numberoftimes -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo HDD-ON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Bktonersupplycounter NumberofBkcolortonersupplyblocks. CountedforeveryonerotationofTonerStirringScrew. Whencheckingtheusagestatusoftoner Numberofblocks 0 NumberofDCONPCBpower-ontimes Numberofpower-ontimes(Non-all-nightPowerUnit). TocountupwhenpoweristurnedON(Non-all-nightPower Unit). Whencheckingtheusagestatusoftheproduct Numberoftimes NumberofHDDstart-uptimes TocountupatHDDstart-up. Whencheckingtheusagestatusoftheproduct Numberoftimes -
8-398
8
COPIER>COUNTER>MISC
PUN-CAB Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PUN-WST Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SDL-NDL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-399 JOB
COPIER>COUNTER>JOB
DVPAPLEN Lv.1 Details Averagepaperlengthofjob Averagepaperlengthintheperiodfromwhentheprinterengine startsprintingoperationtowhenitstopstheoperation. Sincetheprinterengineconsiderssmalljobsthatareexecuted continuouslyasalargejob,theaveragepaperlengthaffects calculationofthelife. 0to99999999 mm Averagedistanceofjob Averagerunningdistanceintheperiodfromwhentheprinter enginestartsprintingoperationtowhenitstopstheoperation. Sincetheprinterengineconsiderssmalljobsthatareexecuted continuouslyasalargejob,theaveragerunningdistanceaffects calculationofthelife. 0to99999999 mm T-8-76
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DVRUNLEN Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-399
8
DRBL-1
COPIER>COUNTER>DRBL-1
T/S-UNIT Lv.1 Details
8-400
COPIER>COUNTER>DRBL-1
TR-BLT Lv.1 Details Usecase Adj/set/operatemethod ITBpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 PrimaryTransferRoller(Y/M/C)partscounter Duetotheengagement/disengagementoftheRoller,Y/M/C RollercounterisadvancedseparatelyfromBkRoller 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 COPIER>COUNTER>DRBL-1>TR-ROLK -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo T-CLN-BD Lv.1 Details
Usecase Adj/set/operatemethod
TransferSeparationGuidepartscounter TransferSeparationGuideUnit 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 ITBCleaningBladepartscounter ITBCleaningBlade 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-ROLC Lv.1 Details
Usecase Adj/set/operatemethod
8-400
8
COPIER>COUNTER>DRBL-1
TR-ROLK Lv.1 Details
8-401
COPIER>COUNTER>DRBL-1
PT-DRM Lv.1 Details Usecase Adj/set/operatemethod BkPhotosensitiveDrumpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 DevelopingAssembly(C)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 2TR-ROLL Lv.1 Details
Usecase Adj/set/operatemethod
PrimaryTransferRoller(Bk)partscounter Duetotheengagement/disengagementoftheRoller,BkRoller counterisadvancedseparatelyfromY/M/CRoller 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 COPIER>COUNTER>DRBL-1>TR-ROLC SecTransferOuterRollerpartscounter SecondaryTransferOuterRoller 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 Thisiscommonlyusedasoperatormaintenancepartscounter.
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DV-UNT-C Lv.1 Details Usecase Adj/set/operatemethod
8-401
8
COPIER>COUNTER>DRBL-1
DV-UNT-Y Lv.1 Details Usecase Adj/set/operatemethod
8-402
COPIER>COUNTER>DRBL-1
DV-UNT-K Lv.1 Details Usecase Adj/set/operatemethod DevelopingAssembly(Bk)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Cassette1SeparationRollerprtscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DV-UNT-M Lv.1 Details Usecase Adj/set/operatemethod
DevelopingAssembly(Y)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 DevelopingAssembly(M)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo C1-SP-RL Lv.1 Details Usecase Adj/set/operatemethod
8-402
8
COPIER>COUNTER>DRBL-1
C1-FD-RL Lv.1 Details Usecase Adj/set/operatemethod
8-403
COPIER>COUNTER>DRBL-1
C2-FD-RL Lv.1 Details Usecase Adj/set/operatemethod Cassette2FeedRollerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 Multi-purposeTraySprtnRollprtscntr Multi-purposeTraySeparationRoller 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo C2-SP-RL Lv.1 Details Usecase Adj/set/operatemethod
Cassette1FeedRollerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 Cassette2SeparationRollerprtscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo M-SP-RL Lv.1 Details
Usecase Adj/set/operatemethod
8-403
8
COPIER>COUNTER>DRBL-1
M-FD-RL Lv.1 Details
8-404
COPIER>COUNTER>DRBL-1
FX-UNIT Lv.1 Details Usecase Adj/set/operatemethod FixingAssemblypartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 FixingBearingpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FX-LW-RL Lv.1 Details Usecase Adj/set/operatemethod
Multi-purposeTrayFeedRollprtscntr Multi-purposeTrayFeedRoller 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 PressureRollerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FX-LW-BR Lv.1 Details Usecase Adj/set/operatemethod
8-404
8
COPIER>COUNTER>DRBL-1
WST-TNR Lv.1 Details Usecase Adj/set/operatemethod
8-405
COPIER>COUNTER>DRBL-1
PT-DR-Y Lv.1 Details Usecase Adj/set/operatemethod PhotosensitiveDrum(Y)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 PhotosensitiveDrum(M)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TN-FIL1 Lv.1 Details Usecase Adj/set/operatemethod
WasteTonerContainerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 TonerFilterpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PT-DR-M Lv.1 Details Usecase Adj/set/operatemethod
8-405
8
COPIER>COUNTER>DRBL-1
PT-DR-C Lv.1 Details Usecase Adj/set/operatemethod
8-406 DRBL-2
COPIER>COUNTER>DRBL-2
DF-PU-RL Lv.1 Details Usecase Adj/set/operatemethod PickupRollerpartscounter:AllReader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed. PickupSeparationPadpartscntr:Reader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed.
PhotosensitiveDrum(C)partscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 T-8-77
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DF-SP-PD Lv.1 Details Usecase Adj/set/operatemethod
8-406
8
COPIER>COUNTER>DRBL-2
DF-FD-RL Lv.1 Details Usecase Adj/set/operatemethod
8-407
COPIER>COUNTER>DRBL-2
LNT-TAP1 Lv.1 Details Usecase Adj/set/operatemethod Dust-collectingcounter:AllReader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed. Dust-colletingTypeEcounter:D-Reader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed.
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DF-SP-RL Lv.1 Details Usecase Adj/set/operatemethod
FeedRoller1partscounter:D-Reader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed. SeparationRollerprtscounter:D-Reader 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Regardlessofthereadmode(1-sided/2-sided),thecounteris advancedeverytimeasheetisfed.
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LNT-TAP2 Lv.1 Details Usecase Adj/set/operatemethod
8-407
8
COPIER>COUNTER>DRBL-2
STAMP Lv.1 Details
8-408
COPIER>COUNTER>DRBL-2
PD-PU-RL Lv.1 Details PickupRollerpartscounter:Deck PickupRoller(Front/Rear)ofPaperDeck/PODDeckLite/Multi Deck(Upper) 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 SeparationRollerpartscounter:Deck SeparationRollerofPaperDeck/PODDeckLite/MultiDeck (Upper) 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DF-HNG-L Lv.1 Details
Usecase Adj/set/operatemethod
Stamppartscounter:AllReader TodisplaythepartscounterandtheestimatedlifeofDADF Stamp. 1stline:Numberofsheetsfedafterthepreviousreplacement 2ndline:Estimatedlifetobeenteredbyoperator Atreplacement Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,andthenenterthe estimatedlife. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 LeftHingepartscounter:AllReader TodisplaythepartscounterandtheestimatedlifeofDADF HingeUnit(Left). 1stline:Numberofsheetsfedafterthepreviousreplacement 2ndline:Estimatedlifetobeenteredbyoperator Atreplacement Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,andthenenterthe estimatedlife. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Thecounterisadvancedeverytimeitisopened/closed.
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PD-SP-RL Lv.1 Details
Usecase Adj/set/operatemethod
8-408
8
COPIER>COUNTER>DRBL-2
PD-FD-RL Lv.1 Details
8-409
COPIER>COUNTER>DRBL-2
C3-FD-RL Lv.1 Details Usecase Adj/set/operatemethod Cassette3FeedRollerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 Cassette4SeparationRollerprtscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo C3-SP-RL Lv.1 Details Usecase Adj/set/operatemethod
FeedRollerpartscounter:Deck FeedRollerofPaperDeck/PODDeckLite/MultiDeck(Upper) 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 Cassette3SeparationRollerprtscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo C4-SP-RL Lv.1 Details Usecase Adj/set/operatemethod
8-409
8
COPIER>COUNTER>DRBL-2
C4-FD-RL Lv.1 Details Usecase Adj/set/operatemethod
8-410
COPIER>COUNTER>DRBL-2
FIN-STPR Lv.1 Details Staplerpartscounter:Fin-A1/C1 StaplerUnit 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberoftimes 0 Saddlefeedpathpartscounter:Fin-C1 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberoftimes 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SORT Lv.1 Details Usecase Adj/set/operatemethod
Cassette4FeedRollerpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 Sortpathpartscounter 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SADDLE Lv.1 Details Usecase Adj/set/operatemethod
8-410
8
COPIER>COUNTER>DRBL-2
SDL-STPL Lv.1 Details
8-411
COPIER>COUNTER>DRBL-2
FN-BFFRL Lv.1 Details Usecase Adj/set/operatemethod BufferRollerpartscounter:Fin-C1 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 InletSttcChgElimprtscntr:Fin-A1/C1 InletStaticChargeEliminator 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PUNCH Lv.1 Details
Usecase Adj/set/operatemethod
SaddleStaplerpartscounter:Fin-C1 SaddleStaplerUnit 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberoftimes 0 Puncherpartscounter:Fin-C1 TocountthenumberofpunchingintheInnerPuncher 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberoftimes 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ENT-STC Lv.1 Details
Usecase Adj/set/operatemethod
8-411
8
COPIER>COUNTER>DRBL-2
SWG-STC Lv.1 Details
8-412
COPIER>COUNTER>DRBL-2
DL-STC Lv.1 Details Usecase Adj/set/operatemethod StackWallSttcElimprtscntr:Fin-A1/C1 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 OffsetRollerpartscounter:Fin-A1 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 Numberofsheets 0 T-8-78
Usecase Adj/set/operatemethod
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RET-RL Lv.1 Details
Usecase Adj/set/operatemethod
SwngGuideInsideSttcChgElim:Fin-C1 SwingGuideInsideStaticChargeEliminator 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 ReturnRollerpartscounter:Fin-C1 PaperReturnRoller(Front/Rear) 1stline:Totalcountervaluefromthepreviousreplacement 2ndline:Estimatedlife Whencheckingtheconsumptionlevelofparts/replacingthe parts Toclearthecountervalue:Selecttheitem,andthenpressClear key. Tochangetheestimatedlife:Selecttheitem,enterthevalue, andthenpressOKkey. Clearthecountervalueafterreplacement. 0to99999999 0 -
Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST-RL Lv.1 Details Usecase Adj/set/operatemethod
8-412
8
T-CNTR
COPIER>COUNTER>T-CNTR
YELLOW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MAGENTA Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CYAN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-413
COPIER>COUNTER>T-CNTR
BLACK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BkTonerContainercounter Tocountupintheunitof0.1BkcolorTonerContainer consumed. WhencheckingtheconsumptionvolumeofTonerContainer T-8-79
8-413
8
V-CNTR
COPIER>COUNTER>V-CNTR
TOTAL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo YELLOW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MAGENTA Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-414
COPIER>COUNTER>V-CNTR
CYAN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BLACK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo VideocountCcounter Todisplaydistributionofcyanvideocount. Smallsize:1,Largesize:1 Whencheckingdistributionofvideocount VideocountBkcounter Todisplaydistributionofblackvideocount. Smallsize:1,Largesize:1 Whencheckingdistributionofvideocount T-8-80
Videocounttotalcounter Todisplaydistributionoftotalvideocountforeachcolor. Smallsize:1,Largesize:1 Whencheckingdistributionofvideocount VideocountYcounter Todisplaydistributionofyellowvideocount. Smallsize:1,Largesize:1 Whencheckingdistributionofvideocount VideocountMcounter Todisplaydistributionofmagentavideocount. Smallsize:1,Largesize:1 Whencheckingdistributionofvideocount -
8-414
8
V2-CNTR
COPIER>COUNTER>V2-CNTR
TOTAL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo YELLOW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MAGENTA Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-415
COPIER>COUNTER>V2-CNTR
CYAN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo BLACK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo VideocountCcounter Todisplaydistributionofcyanvideocount. Smallsize:1,Largesize:2 Whencheckingdistributionofvideocount VideocountBkcounter Todisplaydistributionofblackvideocount. Smallsize:1,Largesize:2 Whencheckingdistributionofvideocount T-8-81
Videocounttotalcounter Todisplaydistributionoftotalvideocountforeachcolor. Smallsize:1,Largesize:2 Whencheckingdistributionofvideocount VideocountYcounter Todisplaydistributionofyellowvideocount. Smallsize:1,Largesize:2 Whencheckingdistributionofvideocount VideocountMcounter Todisplaydistributionofmagentavideocount. Smallsize:1,Largesize:2 Whencheckingdistributionofvideocount -
8-415
8
FEEDER
DISPLAY
FEEDER>DISPLAY
FEEDSIZE Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRY-WIDE Lv.1 Details Usecase Adj/set/operatemethod
8-416
FEEDER>DISPLAY
SPSN-LMN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SPSN-RCV Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo RDSN-LMN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DisofPost-sprtnSensremissionvoltage Todisplaythelight-emittingvoltagevalueforthePost-separation Sensor. Whenjamsfrequentlyoccur N/A(Displayonly) 0to255 Approx.113 DisofPost-sprtnSensrrecvvoltage Todisplaythelight-receivingvoltagevalueforthePostseparationSensor. Whenjamsfrequentlyoccur Removeandinsertthepaperatthesensorposition,andcheck thevalueatpresence/absenceofthepaper. 0to255 Atthepresenceofpaper:123orlower,Attheabsenceofpaper: 179orhigher DisofLeadSensoremissionvoltage Todisplaythelight-emittingvoltagevaluefortheLeadSensor. Whenjamsfrequentlyoccur N/A(Displayonly) 0to255 Approx.113 -
DisoforiginalsizedetectedbyDADF TodisplaytheoriginalsizedetectedbyDADF. N/A(Displayonly) DistanceofOriginalWidthDetectSlider TodisplaythedistancebetweentheOriginalWidthDetection Sliders. Atoriginalsizedetectionerror Checkwhetherthevaluematchingtheslidepositionisdisplayed when the Original Width Slider is moved to the specified size widthposition. 0toapprox.2970 0.1mm -
8-416
8
FEEDER>DISPLAY
RDSN-RCV Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DRSN-LMN Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo DRSN-RCV Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-417
DisplayofLeadSensorreceptionvoltage Todisplaythelight-receivingvoltagevaluefortheLeadSensor. Whenjamsfrequentlyoccur Removeandinsertthepaperatthesensorposition,andcheck thevalueatpresence/absenceofthepaper. 0to255 Atthepresenceofpaper:123orlower,Attheabsenceofpaper: 179orhigher DisofDeliverySensoremitvoltg Todisplaythelight-emittingvoltagevaluefortheDelivery Sensor. Whenjamsfrequentlyoccur N/A(Displayonly) 0to255 Approx.113 DisofDeliverySensorrecvvoltg Todisplaythelight-receivingvoltagevaluefortheDelivery Sensor. Whenjamsfrequentlyoccur Removeandinsertthepaperatthesensorposition,andcheck thevalueatpresence/absenceofthepaper. 0to255 Atthepresenceofpaper:123orlower,Attheabsenceofpaper: 179orhigher T-8-82
ADJUST
FEEDER>ADJUST
DOCST Lv.1 Details AdjofDADFimgleadedgemargin:front ToadjustthemarginattheleadingedgeoftheimageforDADF scanning. ExecutewhentheoutputimageafterDADFinstallationis dislocated. EnterthevalueofservicelabelwhenReaderControllerPCBis replaced/RAMdataiscleared. Asthevalueisincrementedby1,themarginattheleadingedge oftheimageisdecreasedby0.1mm.(Theimagemovesinthe directionoftheleadingedgeofthesheet.) WheninstallingDADF WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue,andthenpressOKkey. -50to50 0.1mm 0 Fine adj of DADF image magnifictn: front To adjust the image magnification in vertical scanning direction forDADFscanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inverticalscanningdirection.(Thefeedingspeedincreases,and theimageisreduced.) WheninstallingDADF WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue,andthenpressOKkey. -30to30 0.10% 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LA-SPEED Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-417
8
FEEDER>ADJUST
DOCST2 Lv.1 Details
8-418
FEEDER>ADJUST
ADJMSCN1 Lv.1 Details Zoomadjin2-sidedhorzscanway:front To make a fine adjustment of the front side image magnification inhorizontalscanningdirectionatthetimeofDADFduplex scanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inhorizontalscanningdirection. Whenadisplacementoccurstothefront/backsideimage magnification at the time of duplex scanning Enterthesettingvalue,andthenpressOKkey. -10to10 0.10% 0 Zoomadjin2-sidedhorzscanway:back To make a fine adjustment of the back side image magnification inhorizontalscanningdirectionatthetimeofDADFduplex scanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inhorizontalscanningdirection. Whenadisplacementoccurstothefront/backsideimage magnification at the time of duplex scanning Enterthesettingvalue,andthenpressOKkey. -10to10 0.10% 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo LA-SPD2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjofDADFimgleadedgemargin:back ToadjustthemarginattheleadingedgeoftheimageforDADF scanning. ExecutewhentheoutputimageafterDADFinstallationis dislocated. EnterthevalueofservicelabelwhenReaderControllerPCBis replaced/RAMdataiscleared. Asthevalueisincrementedby1,themarginattheleadingedge oftheimageisdecreasedby0.1mm.(Theimagemovesinthe directionoftheleadingedgeofthesheet.) WheninstallingDADF WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue,andthenpressOKkey. -50to50 0.1mm 0 Fine adj of DADF image magnifictn: back To adjust the image magnification in vertical scanning direction forDADFscanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inverticalscanningdirection.(Thefeedingspeedincreases,and theimageisreduced.) WheninstallingDADF WhenreplacingtheReaderControllerPCB/clearingRAMdata Enterthesettingvalue,andthenpressOKkey. -20to20 0.10% 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJMSCN2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-418
8
FEEDER>ADJUST
ADJSSCN1 Lv.1 Details
8-419
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ADJSSCN2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Zoomadjin2-sidedvertscanway:front To make a fine adjustment of the front side image magnification inverticalscanningdirectionatthetimeofDADFduplex scanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inverticalscanningdirection. Whenadisplacementoccurstothefront/backsideimage magnification at the time of duplex scanning Enterthesettingvalue,andthenpressOKkey. -10to10 0.10% 0 Zoomadjin2-sidedvertscanway:back To make a fine adjustment of the back side image magnification inverticalscanningdirectionatthetimeofDADFduplex scanning. Asthevalueisincrementedby1,theimageisreducedby0.1% inverticalscanningdirection. Whenadisplacementoccurstothefront/backsideimage magnification at the time of duplex scanning Enterthesettingvalue,andthenpressOKkey. -10to10 0.10% 0 T-8-83
FUNCTION
FEEDER>FUNCTION
SENS-INT Lv.1 Details Usecase InitializationofDADFSensors ToinitializeDADFSensors. WhenreplacingReaderControllerPCB/Post-separationSensor 1(SR2)/Post-separationSensor2(SR3)/Post-separation Sensor3(PCB2)/RegistrationSensor(PCB3)/LeadSensor1 (PCB4)/LeadSensor2(SR5) Selecttheitem,andthenpressOKkey. SpecifyingDADFOperationMotor TospecifytheDADFMotortooperate. ThemotorisactivatedbyMTR-ON. Atoperationcheck Enterthevalue,andthenpressOKkey. 0to9 0:PickupMotor(M1),1:FeedMotor(M2),2:Registration Motor(M3),3:ReadMotor(M4),4:DeliveryMotor(M5),5: DisengagementMotor1(M6),6:DisengagementMotor2(M7), 7:TrayLifterMotor(M8),8:GlassShiftMotor(M9),9:Pickup RollerUnitLifterMotor(M10) FEEDER>FUNCTION>MTR-ON -
Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MTR-CHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-419
8
FEEDER>FUNCTION
TRY-A4 Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRY-A5R Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRY-LTR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-420
FEEDER>FUNCTION
TRY-LTRR Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FEED-CHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange AdjofDADFTraywidthdetectref2:LTRR Toautomaticallyadjustthepaperwidthdetectionreferencepoint 2fortheDADFTray.(LTRR) WhenreplacingtheOriginalWidthVolume(VR) WhenreplacingtheReaderControllerPCB/clearingRAMdata Selecttheitem,andthenpressOKkey. SpecifyingDADFindividualfeedmode TospecifythefeedmodeforDADF. FeedoperationisactivatedbyFEED-ON. Atoperationcheck Enterthevalue,andthenpressOKkey. 0to3 0:1-sidedpickup/deliveryoperation 1:2-sidedpickup/deliveryoperation 2:1-sidedpickup/deliveryoperation(withstamp) 3:2-sidedpickup/deliveryoperation(withstamp) FEEDER>FUNCTION>FEED-ON -
AdjofDADFTraywidthdetectref1:A4 Toautomaticallyadjustthepaperwidthdetectionreferencepoint 1fortheDADFTray.(A4) WhenreplacingtheOriginalWidthVolume(VR) WhenreplacingtheReaderControllerPCB/clearingRAMdata Selecttheitem,andthenpressOKkey. AdjofDADFTraywidthdetectref2:A5R Toautomaticallyadjustthepaperwidthdetectionreferencepoint 2fortheDADFTray.(A5R) WhenreplacingtheOriginalWidthVolume(VR) WhenreplacingtheReaderControllerPCB/clearingRAMdata Selecttheitem,andthenpressOKkey. AdjofDADFTraywidthdetectref1:LTR Toautomaticallyadjustthepaperwidthdetectionreferencepoint 1fortheDADFTray.(LTR) WhenreplacingtheOriginalWidthVolume(VR) WhenreplacingtheReaderControllerPCB/clearingRAMdata Selecttheitem,andthenpressOKkey. -
8-420
8
FEEDER>FUNCTION
CL-CHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo CL-ON Lv.1 Details Usecase Adj/set/operatemethod
8-421
FEEDER>FUNCTION
FAN-CHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange SpecifyingDADFOperationFan TospecifytheDADFFantobeoperated. ThefanisactivatedbyFAN-ON. Atoperationcheck Enterthevalue,andthenpressOKkey. 0to1 0:MotorDriverCoolingFan(FM1) 1:ReadMotorCoolingFan(FM2) FEEDER>FUNCTION>FAN-ON OperationcheckofDADFFan To start operation check for the fan specified by FAN-CHK. Atoperationcheck 1)Selecttheitem,andthenpressOKkey. Thefanoperatesforapproximately5secondsand automaticallystops. 2)PressOKkey. Theoperationcheckiscompleted. PressOKkeyagainafterexecution.Itstopsautomaticallyafter approx. 5 sec; however, it does not finish unless OK key is pressed(STOPscreendoesnotappear.) Approx.5seconds FEEDER>FUNCTION>FAN-CHK -
Caution
SpecifyingDADFOperationClutch TospecifytheDADFClutchtobeoperated. TheClutchisactivatedbyCL-ON. Atoperationcheck Enterthevalue,andthenpressOKkey. 0to1 0:Clutch(CL1),1:Clutch(CL2) FEEDER>FUNCTION>CL-ON OperationcheckofDADFClutch To start operation check for the Clutch specified by CL-CHK. Atoperationcheck 1)Selecttheitem,andthenpressOKkey. Theclutchoperatesforapproximately5secondsand automaticallystops. 2)PressOKkey. Theoperationcheckiscompleted. PressOKkeyagainafterexecution.Itstopsautomaticallyafter approx. 5 sec; however, it does not finish unless OK key is pressed(STOPscreendoesnotappear.) Approx.5seconds FEEDER>FUNCTION>CL-CHK -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo FAN-ON Lv.1 Details Usecase Adj/set/operatemethod
Caution
8-421
8
FEEDER>FUNCTION
SL-CHK Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange
8-422
FEEDER>FUNCTION
MTR-ON Lv.1 Details Usecase Adj/set/operatemethod Operationcheckofmotor To start operation check for the motor specified by MTR-CHK. Atoperationcheck 1)Selecttheitem,andthenpressOKkey. Theunitoperatesforapproximately5secondsand automaticallystops. 2)PressOKkey. Theoperationcheckiscompleted. BesuretopresstheOKkeyagainafterexecution.The operationautomaticallystopsafterapproximately5seconds, butisnotcompletedunlesstheOKkeyispressed(STOPisnot displayed). Approx.5seconds FEEDER>FUNCTION>MTR-CHK RotationofDADFRollers TorotateforcleaningtheDADFRollers. Cleantherollerbyputtingthelint-freepapermoistenedwith alcoholwhileitisrotating. Atrollercleaning 1)Selecttheitem,andthenpressOKkey. 2)Cleantherotatingrollerswithlint-freepapermoistenedwith alcohol. 3)PressOKkey. Therollersstop. -
Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SL-ON Lv.1 Details Usecase Adj/set/operatemethod
Caution
SpecifyingDADFOperationSolenoid TospecifytheDADFsolenoidtobeoperate. ThesolenoidisactivatedbySL-ON. Atoperationcheck Enterthevalue,andthenpressOKkey. 0to1 0:DisengagementSolenoid(SL1) 1:StampSolenoid(SL2) FEEDER>FUNCTION>SL-ON OperationcheckofDADFSolenoid To start operation check for the solenoid specified by SL-CHK. Atoperationcheck 1)Selecttheitem,andthenpressOKkey. Theunitoperatesforapproximately5secondsand automaticallystops. 2)PressOKkey. Theoperationcheckiscompleted. BesuretopresstheOKkeyagainafterexecution.The operationautomaticallystopsafterapproximately5seconds, butisnotcompletedunlesstheOKkeyispressed(STOPisnot displayed). Approx.5seconds FEEDER>FUNCTION>SL-CHK -
Caution
Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ROLL-CLN Lv.1 Details
Usecase Adj/set/operatemethod
8-422
8
FEEDER>FUNCTION
FEED-ON Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-423
OperationcheckofDADFindividualfeed To start operation check for the feed mode specified by FEEDCHK. Atoperationcheck Selecttheitem,andthenpressOKkey. FEEDER>FUNCTION>FEED-CHK T-8-84
8-423
8
SORTER
ADJUST
SORTER>ADJUST
PNCH-HLE Lv.1 Details
8-424
SORTER>ADJUST
STP-F2 Lv.1 Details Adjfrtstaplepstn(45deg)(LTR):Fin-C1 ToadjusttheonefrontstaplepositionontheLTRsizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursatthefrontstaplepositiononLTR sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 Adjrearstaplepstn(45deg)(A4):Fin-C1 ToadjusttheonerearstaplepositionontheA4sizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursattherearstaplepositiononA4size paper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-R1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-F1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjofpunchholepstnfrompaperedge Toadjustthelengthfromthepaperedgetothepunchhole. Asthevalueisincrementedby1,thepunchholemovesby1 mm. +: -: Uponuser'srequest 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. -4to2 1mm 0 Adjfrtstaplepstn(45deg)(A4):Fin-C1 ToadjusttheonefrontstaplepositionontheA4sizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursatthefrontstaplepositiononA4R sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-424
8
SORTER>ADJUST
STP-R2 Lv.1 Details
8-425
SORTER>ADJUST
SDL-STP Lv.1 Details Adjofsaddlestapleposition:Fin-C1 Toadjustthestaplepositionforsaddlestitching.. Asthevalueisincrementedby1,thestaplepositionmoves downwardby0.5mm. Whenmisalignmentoccursatthefoldpositionandthestaple positionforsaddlestitching Enterthesettingvalue,andthenpressOKkey. -3to3 0.5mm 0 0 Adjofsaddlealignmentposition:Fin-C1 ToadjustthetravellengthoftheAlignmentPlateforsaddle stitching. Asthevalueisincrementedby1,thealignmentpositionmoves inthepush-indirectionby0.5mm. Whenmisalignmentoccursduringthesaddlestitching Enterthesettingvalue,andthenpressOKkey. 0to1 0.5mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-2P Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjrearstaplepstn(45deg)(LTR):Fin-C1 ToadjusttheonerearstaplepositionontheLTRpaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursattherearstaplepositiononLTR sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 Adjustmentof2-stapleposition:Fin-A1 Toadjustthepaperpull-inamountoftheGripperatthetimeof 2-pointstapling. Asthevalueisincrementedby1,thepaperpull-inamountis increasedby0.1mm. Whenmisalignmentoccursatthe2-pointstapleposition Enterthesettingvalue,andthenpressOKkey. -25to25 0.27mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SDL-ALG Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-425
8
SORTER>ADJUST
ST-ALG1 Lv.1 Details
8-426
SORTER>ADJUST
STP-F3 Lv.1 Details AdjA4Rfrtstplpstn(<45deg):Fin-C1 ToadjusttheonefrontstaplepositionontheA4Rsizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursatthefrontstaplepositiononA4R sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 AdjLTRRfrtstplpstn(<45deg):Fin-C1 ToadjusttheonefrontstaplepositionontheLTRRsizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursatthefrontstaplepositiononLTRR sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo ST-ALG2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjStackerA4sizealignpstn:Fin-C1 ToadjusttheA4sizepaperalignmentposition. Asthevalueisincrementedby1,thetravellengthofthe AlignmentPlateisincreasedby0.42mm. WhenmisalignmentoccursinA4sizepaper Enterthesettingvalue,andthenpressOKkey. -10to10 0.42mm 0 0 AdjStackerLTRsizealignpstn:Fin-C1 ToadjusttheLTRsizepaperalignmentposition. Asthevalueisincrementedby1,thetravellengthofthe AlignmentPlateisincreasedby0.42mm. WhenmisalignmentoccursinLTRsizepaper Enterthesettingvalue,andthenpressOKkey. -10to10 0.42mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-F4 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-426
8
SORTER>ADJUST
STP-R3 Lv.1 Details
8-427
SORTER>ADJUST
SW-UP-RL Lv.1 Details AdjofSwingRollerfallingpstn:Fin-C1 ToadjusttheSwingRollerdownposition. Asthevalueisincrementedby1,theSwingRollerdownposition movesdownwardby0.2mm. WhenpaperfailstobetransportedtotheProcessingTrayand misalignmentoccurs Enterthesettingvalue,andthenpressOKkey. -17to33 0.2mm 0 0 Adjofpunchverticalrgstpstn:Fin-C1 Toadjusttheverticalregistrationpositionofthepapertobe punched. Asthevalueisincrementedby1,thepunchholepositionmoves towardtheedgeby1mm. Whenmisalignmentofpunchholepositionoccurs Enterthesettingvalue,andthenpressOKkey. -4to2 1mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-R4 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjA4Rrearstplpstn(<45deg):Fin-C1 ToadjusttheonerearstaplepositionontheA4Rsizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursattherearstaplepositiononA4R sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 AdjLTRRrearstplpstn(<45deg):Fin-C1 ToadjusttheonerearstaplepositionontheLTRRsizepaper. Asthevalueisincrementedby1,thestaplepositionmovesto therearsideby0.49mm. WhenmisalignmentoccursattherearstaplepositiononLTRR sizepaper Enterthesettingvalue,andthenpressOKkey. -6to6 0.49mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo PUN-V-RG Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-427
8
SORTER>ADJUST
PRCS-RET Lv.1 Details
8-428
SORTER>ADJUST
DW-CL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo THC-CL Lv.1 Details Settingdownwardcurlprevmode:Fin-C1 Set1whendownwardcurloccursonthepaperdeliveredtothe StackTray,andpapersarenotstackedaccurately. WhendownwardcurloccursonthepaperdeliveredtotheStack Tray,andpapersarenotstackedaccurately Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Settingheavypprcurlprevmode:Fin-C1 Set1whenupwardcurloccursatthetimeofheavypaper delivery. When1isset,theamountofStackTraydescensionforstack deliveryincreases.Thepapersurfacedetectionisperformedfor everysheet,notforevery5sheets. Whenupwardcurloccursatthetimeofheavypaperdelivery Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo UP-CL Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
AdjProcessTrayreturnamount:Fin-C1 Toadjustthepull-backamountofthepaperontheProcessing Tray. Asthevalueisincrementedby1,thepull-backamountis decreasedby1.4mm. WhenthepaperisbentintheProcessingTray Enterthesettingvalue,andthenpressOKkey. 0to5 1.4mm 0 0 Settingofupwardcurlprevmode:Fin-C1 Set1whenupwardcurloccursonthepaperdeliveredtothe StackTray,andpaperleaningduetothecurloccurs. WhenupwardcurloccursonthepaperdeliveredtotheStack Tray,andpaperleaningduetothecurloccurs Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-428
8
SORTER>ADJUST
THC-PUSH Lv.1 Details
8-429
SORTER>ADJUST
THN-STC Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo STP-P-CH Lv.1 Details Setpoorthinpprstackprevmode:Fin-C1 Set1whenthinpaperisnotappropriatelystacked. When1isset,thestackingconditionofthinpaperimproves. Whenthinpaperisnotappropriatelystacked Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Setstplstackdisplaceprevmode:Fin-C1 Set1whenthepaperonthetopismisalignedinthestaple deliverymode. When1isset,paperstackalignmentoperationisexecutedtwice immediatelybeforestapling. Whenthepaperonthetopismisalignedinthestapledelivery mode Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo OFST-STC Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settingheavypproutprevmode:Fin-C1 Set1whenthealreadystackedpaperispushedoutatthetime ofheavypaperdelivery. When1isset,theStackTraymovesdowntemporarilybefore theheavypaperisdeliveredtotheProcessingTrayiftheleading sheetisheavypaper. Whenthealreadystackedpaperispushedoutatthetimeof heavypaperdelivery Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Setpooroffsetstackprevmode:Fin-C1 Set1whenpaperisnotappropriatelystackedinthesmall-size offsetmode. When1isset,bufferoperationisnotperformedinthesmall-size offsetmode. Whenpaperisnotappropriatelystackedinthesmall-sizeoffset mode Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-429
8
SORTER>ADJUST
TRY-NIS Lv.1 Details
8-430
SORTER>ADJUST
FIN-NIS Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo 1SHT-SHF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SDL-SWCH Lv.1 Details Settraydrivenoisereductmode:Fin-C1 Set1whentheFinisheroperationnoiseisloud. When1isset,theinitialFinisheroperationisminimized. WhentheFinisheroperationnoiseisloud Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Set1-sheetOffset+Collate:Fin-C1 Set1whensettingOffsetandCollatefor1-sheetdocument. WhensettingOffsetandCollatefor1-sheetdocument Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Sddlstackcapacityswitchmode:Fin-C1 Set1whenincreasingthestackingcapacityforsaddlestitching. When1isset,thestackingcapacityincreasesovertheupper limit. Whenincreasingthestackingcapacityforsaddlestitching Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TRY-SU Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Settrayswitchnoisereductmode:Fin-C1 Set1whentheoperationnoiseatthetimeofswitchingtheStack Trayisloud. When1isset,theStackTrayriseoperationbecomesslow. WhentheoperationnoiseatthetimeofswitchingtheStackTray isloud Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 Settrayswitchingspeedupmode:Fin-C1 Set1whentheStackTrayswitchingtimeislong. When1isset,theStackTrayrisespeedbecomesfast. WhentheStackTrayswitchingtimeislong Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-430
8
SORTER>ADJUST
SDL-ALM Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SFT-AMT1 Lv.1 Details
8-431
SORTER>ADJUST
STP-NTN Lv.1 Details AdjofStapleNeedlepitch(A4):Fin-A1 Toadjustthepitchbetweenneedlesfor2-pointstapling. Asthevalueisincrementedby1,thepitchbetweenneedles becomeswiderby0.27mm. Whenthepitchbetweenneedlesfor2-pointstaplingis inappropriate Enterthesettingvalue,andthenpressOKkey. -8to8 0.27mm 0 0 Adjoffrontstapleposition:Fin-A1 Toadjustthepaperpull-inamountoftheGripperatthetimeof front1-pointstapling. Asthevalueisincrementedby1,thepaperpull-inamountis increasedby0.1mm. Whenmisalignmentoccursatthefrontstapleposition Enterthesettingvalue,andthenpressOKkey. -50to50 0.27mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo SFT-AMT2 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Setsddlfullstackalarmmode:Fin-C1 Set1whendisablingthestackfullalarmforsaddlestitching. Whendisablingthestackfullalarmforsaddlestitching Enterthesettingvalue,andthenpressOKkey. 0to1 0:OFF,1:ON 0 AdjshftamntofShftRoll(frt):Fin-A1 ToadjustthefrontshiftamountoftheShiftRoller. Asthevalueisincrementedby1,theShiftRollermovestoward theguideby0.1mm. Whenthefrontshiftamountofthepaperisinappropriate Enterthesettingvalue,andthenpressOKkey. 0to50 0.1mm 0 0 AdjshftamntofShftRoll(Rear):Fin-A1 ToadjusttherearshiftamountoftheShiftRoller. Asthevalueisincrementedby1,theShiftRollermovestoward theguideby0.1mm. Whentherearshiftamountofthepaperisinappropriate Enterthesettingvalue,andthenpressOKkey. -50to50 0.1mm 0 0 -
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo INSTP-F1 Lv.1 Details
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-431
8
SORTER>ADJUST
INSTP-R1 Lv.1 Details
8-432
Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
Adjofrearstapleposition:Fin-A1 Toadjustthepaperpull-inamountoftheGripperatthetimeof rear1-pointstapling. Asthevalueisincrementedby1,thepaperpull-inamountis increasedby0.1mm. Whenmisalignmentoccursattherearstapleposition Enterthesettingvalue,andthenpressOKkey. -50to50 0.27mm 0 0 T-8-85
FUNCTION
SORTER>FUNCTION
FIN-CON Lv.1 Details ControllerPCBRAMclear:Fin-C1 ToexecutetheRAMclearofFinisherControllerPCBtodelete alltheadjustmentcontentsandcounterinformation. 1)Selecttheitem,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. OutputtheservicemodesettingvaluesbyP-PRINTbefore execution.Afterexecution,enterthenecessarysettingvalues. RAMclearisexecutedafterthemainpoweristurnedOFF/ ON. COPIER>FUNCTION>MISC-P>P-PRINT T-8-86
8-432
8
OPTION
SORTER>OPTION
BLNK-SW Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-433
8-433
8
BOARD
OPTION
BOARD>OPTION
MENU-1 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MENU-2 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-434
BOARD>OPTION
MENU-3 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo MENU-4 Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo Hide/disofprintersettingmenulevel3 Tosetwhethertodisplayorhidethelevel3ofprintersetting menu. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Hide/disofprintersettingmenulevel4 Tosetwhethertodisplayorhidethelevel4ofprintersetting menu. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 -
Hide/disofprintersettingmenulevel1 Tosetwhethertodisplayorhidethelevel1ofprintersetting menu. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Hide/disofprintersettingmenulevel2 Tosetwhethertodisplayorhidethelevel2ofprintersetting menu. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 -
8-434
8
BOARD>OPTION
SURF-OFF Lv.1 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo TR-DSP Lv.2 Details Usecase Adj/set/operatemethod Caution Display/adj/setrange Unit Appropriatetargetvalue Defaultvalue Requiredtime Relatedservicemode Relatedusermode Supplement/memo
8-435
UFRboardfunctionON/OFF TosetON/OFFofthefunctionaccordingtotheSURFboard connectionstatus. 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:OFF,1:ON Hide/disoftonerreductionfunction Tosetwhethertodisplayorhidethetonerreductionfunction. Uponuser'srequest 1)Enterthesettingvalue,andthenpressOKkey. 2)TurnOFF/ONthemainpowerswitch. 0to1 0:Hide,1:Display 0 Thetonerreductionfunctionisconstantlyenabledasdefault. Toner color is limited to 2.1 colors when genuine Canon profile isused,butitmaybecome2.1colorsormorewhenacustom profile is used for PS data. Therefore, it is limited to 2.1 colors by thetonerreductionfunction.
T-8-88
8-435
Installation
to Check this How Installation Procedure Things to do Before Installation Points to Note Before Installation Combination Table of Accessory Installation Checking the Contents Unpacking InstallationProcedure Printer Cover-C1 2.5 inch/80GB HDD-C1 2.5 inch/250GB HDD-D1 Removable HDD Kit-AC1
9
HDD Mirroring Kit-D1 Reader Heater Unit-G1 Cassette Heater Unit-37 Cassette Heater Unit-32 Utility Tray-A1 Key Switch Unit-A2 Voice Operation Kit-C1 Voice Guidance Kit-F1 Card Reader-C1 C opy Tray- J1 Inner 2-Way Tray-F1 Additional Memory B 512MB Expansion Bus-F1, IPSec Board-B2, Wireless LAN Board-B1
9-2
9-2
9
HowtoCheckthisInstallationProcedure
9-3
ThingstodoBeforeInstallation
SelectinganInstallingLocation
Theinstallinglocationneedstomeetthefollowingconditions: Thus,itisdesirabletogoovertheplannedinstallinglocationbeforebringingthemachineto theuser'ssite. 1)Environmentoftheinstallationsitemustbewithintherangeindicatedbelow.Avoidany area near the faucet, the water heater, the humidifier, or the refrigerator.
WhenUsingthePartsIncludedinthePackage
Asymbolisdescribedontheillustrationinthecaseofusingthepartsincludedinthepackage ofthisproduct.
Packaged Item
F-9-1
Operation/imageassuredrange:temperature:15.0to30.0degC,humidity:5to80%
2) Keep the installation site away from the source of fire, a dusty place, or a place generating ammoniagas.Inthecaseofinstallingthisequipmentinaplacesubjecttodirectsunlight,it isrecommendedtohangcurtainsoverthewindow. 3)Roomodorcanbebotheringwhenrunningthemachineforalongtimeinapoorlyventilatedroomalthoughtheozoneamountgeneratedwhilerunningthisequipmentdoes notharmhumanhealth.Besuretoprovideadequateventilationoftheroomtokeepthe workenvironmentcomfortable. 4) The foot of this equipment should be in contact with the floor. This equipment should be keptonthelevel. 5)Themachinemustbeawayfromthewallby100mmormoretosecureanenoughspace toperformmachineoperation.
SymbolsintheIllustration
Thefrequently-performedoperationsaredescribedwithsymbolsinthisprocedure.
Screw Connector Harness
Tighten Claw
Remove
Connect
Disconnect
Secure
Free
ColorImageReaderUnit-B2
4 (100 mm) ro more
Checking instruction
Check
Visual Check
Sound Check
F-9-2
Insert
Remove
Push
Plug in
Turn on
9-3
9
4 (100 mm) or more 19 3/4 (500 mm) or more
9-4
DuplexColorImageReaderUnit-B1+InnerFinisher-A1+andPaperDeckUnit-B1
PointstoNoteBeforeInstallation
Takenoteofthefollowingpointswheninstallingthisequipment. 1)Movingthisequipmentfromalow-temperatureplacetoawarmplatecangenerate condensation,resultinginimagefault.Thus,whenunpackingthisequipment,leaveitfor2 hoursormoresothattheequipmentbecomescomfortablewiththeroomtemperature. (Condensation:formationofliquiddropsfromwatervaporonmetalsurface,andusually occurswhenbringingametalobjectfromalow-temperatureplacetoawarmplacedueto rapidly-cooledsurroundingmoisturevapor.) 2)Thehostmachineweighsmaximum175kg.Itisrecommendedtoliftitwith4peopleor more.However,ifthereisastandardtohandleaheavyloadineachsalescompany,follow itforoperation. Also,makesuretoliftthemachinewithkeepingitlevelatoperation.
DuplexColorImageReaderUnit-B1+External2/3HolePuncher-B1+BookletFinisherC1+BufferPassUnit-G1+PaperDeckUnit-B1
4 (100 mm) or more 19 3/4 (500 mm) or more 19 3/4 (500 mm) or more
F-9-4
Becausethegravitycenterisintherear,liftwithcare.
6)Besuretoinstallthisequipmentinawell-ventilatedplace.Donotplacethisequipment neartheairventintheroom.
9-4
9-5
CombinationTableofAccessoryInstallation
CombinationoftheOptionsinstallingtotheRightSide oftheHostMachine
MEMO:
CombinationoftheOptionsRelatedtotheHDD
WheninstallingtheHDDoptions(5productsindicatedbelow),refertothepagesindicatedin thefollowingtable.
ReferencePagesintheManual
p.9-43top.9-56 p.9-57top.9-75 p.9-43top.9-56,p.9-76top.9-21 p.9-57top.9-21 p.9-43top.9-56 RefertotheInstallationManualandInstruction SheetofCASE-1andCASE-2packedwiththeHDD DataEncryption&MirroringKit. p.9-57top.9-75 RefertotheInstallationManualandInstruction SheetofCASE-1andCASE-2packedwiththeHDD DataEncryption&MirroringKit.
T-9-2
UtilityTray-A1
UtilityTray-A1 VoiceGuidance Kit-F1 VoiceOperation Kit-C1 CardReader-C1 no no yes
VoiceGuidance Kit-F1
no no yes
VoiceOperation Kit-C1
no no yes
Card Reader-C1
yes yes yes T-9-1
yes:Available
no:Unavailable
HDD(80GB/250GB)+ HDDDataEncryption&MirroringKit
7 RemovableHDDKit+
9-5
9
CheckingtheContents
[1] Drum Unit (Bk) x 1 [2] Drum Unit (Color) x 3
9-6
1 [4]
2 [11]
Power Cable x 1
F-9-6
9-6
9
*1Useonlyinthecasethatthecassettepedestalisnotinstalled. *2Theconnectorhasadifferentshapedependingonlocations. OtherthanUSA MEMO:
9-7
EUR(230V) C5030i/C5035i
3 1 1 1 1 5 1
T-9-3
e-Manual QuickReference FrequentlyAskedQuestions GettingStarted RegistrationforPurchaseinUSA DrumUnitWarranty InstallationCheckList UsersGuide MEAPAdministrationSoftware UFRIIUserSoftware PCLUserSoftware PSUserSoftware MaintenanceGuide HowtoUsetheManuals(UK) AMSKit Register/UpdateSoftwareAdministratorGuide
1 1 1 1 1 1 1 1 1 1 1 1 1
9-7
9
Unpacking
1)Unpackthehostmachine.
9-8
2)Holdthe4gripsontheleftorrighttoliftthehostmachineup,andthenputdownthemachinefromtheskid.
CAUTION:
Thehostmachineweighsmaximum175kg.It
Becausethegravitycenterisintherear,liftwith
Grip
Grip
F-9-7
9-8
9
3)Removeallthetapesattachedtothehostmachine.
9-9
F-9-8
MEMO:
4)PullouttheCassette1and2,andremovethepacking materialsfromthem.
5)OpentheFrontCoverandtheRightLowerCover.
F-9-10 F-9-9
9-9
9
6)PeelofftheProtectionPaper.
9-10
7)Inserttheprotrusionin1place.Whilepushingdown[A]claw,inserttheclawin2places,andinstallthe RightFrontCover2.
Protection Paper
F-9-11
F-9-12
x3
x2
[A]
F-9-13
F-9-14
9-10
9
InstallationProcedure
InstallingtheDrumUnit
1)RemovetheITBCover. 2screws(toloosen)
9-11
2)CheckthattheITBSubPressureReleaseLeverispositionedinthedirectionofthearrowandifnot,turnitandadjustthe position.
screw
F-9-15
3) Turn the ITB Pressure Release Lever in the direction of the arrow, and then fit the projection to the triangle mark on the platetoreleasethepressureITB.
9-11
9
4)PullouttheProcessUnituntilitstops.
9-12
x2
F-9-18
5)HoldtheDevelopingAssemblywithonehand.Withtheotherhand,liftthedummyDrumupverticallyandslowlytoremoveit.(IfthedummyDrumisremoved,theseal canberemovedsimultaneously.)
CAUTION: Ifdiagonallypulledout,theseal mightbedamaged.Besuretopull it out flatly in upper direction, and carefully. Likely,removetheDrumofeach color.
Dummy Drum
F-9-19
9-12
9-13
F-9-20
Seal
Seal
Front Side
F-9-21
9-13
9-14
6)HolddownthetopsurfaceofeachDevelopingAssemblyafterremovingDummyDrums.
DonottouchtheDrumarea. DonotmaketheCovertobeincontact
withtheDrumarea.
DonotmaketheDrumareadisposedof
lightfor5minutesormore.
F-9-22
7)UnpacktheDrumUnit,andremovethecoverfromtheDrumUnit.
Claws2pc
CAUTION: Thecovermightbestiff,soproceed withextracarewhenremovingthe coverfromtheDrumUnit.
Cover
Dram Unit
x2
Claw
F-9-23
9-14
9-15
CAUTION: OnlydrumforBk(bluecolor) is specified the color. Drums forthe3colors(greenones), are not specified the color (Y, M,C).
Grip
F-9-25
9-15
9-16
F-9-26
8)FittheguideoftheProcessUnittotheguideoftheDrumUnittoinstalltheDrumUnit.
9-16
9-17
9)Checkthatthe8LEDlight-receivingareasoftheDrumUnitarenotofffromthebase.
F-9-28
10)PuttheProcessUnitbacktothehostmachine,andsecurewiththe2screws.
CAUTION: CheckthatthereisnogapbetweenthehostmachineandtheProcessUnit,andthensecurewiththescrew.
[A]
[A]
9-17
9-18
F-9-29
11)TurntheITBPressureReleaseLeverinthe direction of the arrow, and then fit the projection tothetrianglemarkontheplatetoapply pressure.
12)InstalltheITBCover,andtightenthe2 screws(whichhavebeenloosened).
F-9-30
9-18
9
13)ReleasetheWasteTonerLockLever.
9-19
15)ClosetheRightLowerCover,the RightUpperCover,andtheFront Cover.
14)SettheWasteTonerContainer,andthenputtheLeverback.
F-9-31
F-9-32
FixingtheMachineinPlace
<Inthecasethatthepedestalisinstalled>
1)Movethehostmachinetoinstallingposition,turnthe4adjustersofthepedestalwithscrewdriver, andsecurethishostmachine.
F-9-33
9-19
9
SettingtheEnvironmentHeaterSwitch
CAUTION:
9-20
Incasethatthesettingenvironmentishighhumidityenvironment(*),turnontheEnvironmentHeaterSwitch. *Thisisthecasethatthevalueoftheabsolutewatervolumeinthemachineisabout12gormore. Service Mode > COPIER > DISPLAY > ANALOG > ABS-HUM
1)RemovetheEnvironmentHeaterSwitchCover.
F-9-34
2)TurnONtheEnvironmentHeaterSwitch.
3)InstalltheEnvironmentHeaterSwitchCover.
F-9-35
9-20
9-21
SettingtheTonerContainer/TurningtheMainPowerON
MEMO: OnlyforAUS,theTonerContainerisinstalledonthehostmachine.
MEMO:
WhenturningONthemainpower,druminitializationanddevelopingassemblyinitializationareautomaticallyexecuted. In case of the host machine with the Toner Container, toner refill is executed in a row. Even turning OFF the main power during drum initialization, developing assembly initialization and toner refill, they will be re-executed when turning ON the power again.
4)Afteractivation,followtheinstructionintheControlPanel,andpresstheshutdownkeyintheControlPanel. 5)TurnONthemainpowerswitch. 6)EnterthefollowingServiceMode,makesurethatthesettingvalueis"1". COPIER>OPTION>FNC-SW>W/SCNR 7)SetthevalueofthefollowingServiceMode. COPIER > OPTION > BODY > SCANTYPE SettingValue"0"ColorImageReaderUnit-B1/B2 SettingValue"1"DuplexColorImageReaderUnit-B1 8)ExittheServiceMode.
MEMO:
In case of the host machine with the Toner Container, once the machine goes to standby state, drum initialization, developing assembly initialization and toner refill are completed. IncaseofthehostmachinewithouttheTonerContainer,executethefollowingprocedures.
9-21
9
9)OpentheTonerCover.
9-22
10)Addcheckmarkstoeachcolordisplayedontheoperationscreen,andpress[RemoveTonerCartridges] toopentheTonerReplacementCover.
F-9-36
F-9-37
11) Hold the Toner Container as the figure below, and shake it approximately10times.
12)RemovetheProtectionCapoftheTonerContainer whilerotatingittothedirectionofthearrow.
F-9-38 F-9-39
9-22
9-23
14)ClosetheTonerCover.
13)InserttheTonerContainerallthewayin,andclosetheTonerExchangeCover.
MEMO:
Toner refill will be executed. Oncethehostmachinegoestostandby state,druminitialization,developing assembly initialization and toner refill are completed.
F-9-40
TurningOFFtheMainPowerSwitch
1)TurnOFFthemainpowerswitchofthehostmachine. 2)BesurethatControlPanelDisplayandMainPowerLamparebothturnedOFF,andthendisconnectthepowerplug.
9-23
9
CassetteSetting
1)PresstheCassetteReleaseButton,andpullouttheCassette1and2 towardthefront.
9-24
2)HoldtheSideGuidePlateLever,andadjustitto the predefined size. At that time, move the Side GuidePlatebyreferringthesizeindex(label)of the sheet size to be set, and fit it to the slot. 3)HoldtheTrailEdgeGuidePlateLever,andadjust it to the predefined size. At that time, move the TrailEdgeGuidePlatebyreferringthesizeindex (label) of the sheet size be set, and fit it to the slot.
Side Guide Plate Rear Edge Guide Plate Lever Side Guide Plate Lever
Button
6)Cut2placesoftheSizePlatewithnippers. Cut
F-9-44 F-9-43
9-24
9-25
8)ClosethecoverfromwhichtheSizePlateispushedin,andinstallthecassette. 9)Settheothercassetteinthesameway. 10)Ifthecassettepedestalisinstalled,dothesameforthecassetteofthecassettepedestalaswell.
7)SettheSizePlateinaccordancewiththesizebeingset.(LumptheSizePlatesnotinusetogether andstorethemattherear.)
MEMO: Papersizesettingsareautomaticallyrecognized.
F-9-45
9-25
9
CheckingaftertheInstallation
1)InServiceMode,checktheresultofDrumUnitinitialization. Makesurethatthevalueoftheinstalledcoloris[0to2].
9-26
MEMO: SettingtheADFbeforeexecutingAutoAdjustGradation. Refertothe"Afterinstallationsetting"inthe"theDuplexColorImageReaderUnit-B1, ColorImageReaderUnit-B1/B2installationprocedure".
Service Mode > COPIER > DISPLAY > HV-STS > THCK-Y Service Mode > COPIER > DISPLAY > HV-STS > THCK-M Service Mode > COPIER > DISPLAY > HV-STS > THCK-C
MEMO: Ifanerrorcode[E061-xxxx]isdisplayedonthescreenorthevalueisnotappropriate, 1. Turn OFF the power, refit the Drum Unit and turn On the power again. 2.Iftheaboveworkdoesnotsolvetheproblem,executeinitializationoftheDrumUnit foreachcolorinServiceMode.
ExecutetheITBEquilibriumPositionDetection
In the case that the floor surface is either warped or uneven, execute the following work. 1)Checkthatthemainbodyisinstandbystate. 2)ExecutetheITBEquilibriumPositionDetectionServiceMode(COPIER>FUNCTION>MISCP>ITB-INIT)(Level1).Thisservicemodewilltakeapprox.2to3minutes.
Service Mode > COPIER > FUNCTION > DPC > DRMRSETY ServiceMode>COPIER>FUNCTION>DPC>DRMRSETM ServiceMode>COPIER>FUNCTION>DPC>DRMRSETC
AutoAdjustGradation
AutoAdjustGradationisexecutedwith"Plain","Heavy1/Heavy2"or"Heavy3".
When"Plain"paperisused
1)Cleanthesurfaceofcopyboardglass. 2)SetA3,A4,1117orLTRpaperinthecassette. 3)Select[Settings/Registration]>[Adjustment/Maintenance]>[AdjustImageQuality]>[Auto AdjustGradation]>[Plain]>[FullAdjust]. 4)Selectthecassetteforthetestprintandpress"OK". 5)Then,followthedirectiondisplayedonUI.
Service Mode > COPIER > ADJUST > DENS > CONT-Y ServiceMode>COPIER>ADJUST>DENS>CONT-M Service Mode > COPIER > ADJYST > DENS > CONT-C Service Mode > COPIER > ADJYST > DENS > CONT-K
When"Heavy1/Heavy2"paperisused
1)Cleanthesurfaceofcopyboardglass. 2)Settheheavypaperinthecassette. 3)Select[Settings/Registration]>[Adjustment/Maintenance]>[AdjustImageQuality]>[Auto AdjustGradation]>[Heavy1/Heavy2]>[FullAdjust]. 4)Selectthecassetteforthetestprintandpress"OK". 5)Then,followthedirectiondisplayedonUI.
Service Mode > COPIER > ADJUST > DENS > SGNL-Y ServiceMode>COPIER>ADJUST>DENS>SGNL-M ServiceMode>COPIER>ADJUST>DENS>SGNL-C ServiceMode>COPIER>ADJUST>DENS>SGNL-K MEMO: IfanErrorCode[E020-xxxx]isdisplayedonthescreenorthevalueisnotappropriate instep2)orstep3),turnOFFandthenONthemainpoweroftheHostMachine;and then execute initialization of YMCK Developing Assembly.
When"Heavy3"paperisused
1)SettheheavypaperontheMulti-purposeTray. 2)Select[Settings/Registration]>[Adjustment/Maintenance]>[AdjustImageQuality]>[Auto AdjustGradation]>[Heavy3]>[FullAdjust]. 3)Selectthecassetteforthetestprintandpress"OK". 4)Then,followthedirectiondisplayedonUI.
ServiceMode>COPIER>FUNCTION>INSTALL>INISET-4
9-26
9
AdjustingImagePosition
9-27
MEMO: Thesecondsideofthe2-sidedcopymentionedlatermeansthesecondsideintheimageformationorder. With this equipment, the second side in the image formation order at the time of 2-sided copy/print is equivalent to the first side of the original.
MarginAdjustment(1stside;MechanicalAdjsutment)
1)MakecopiesusingtheCassette1and2,and checkthattheleftedgemarginis2.5+/-1.5mm. Feeding direction of paper
image
<InCaseofNonstandard>
L1
F-9-47
F-9-48
9-27
9
5)Movetheadjustingplatesbackandforthby referringthescalecheckedinthestep3).As movingtheadjustingplatetowardtherearby 1scale,theleftedgemarginbecomes1mm smaller.
9-28
F-9-49
9-28
9-29
MEMO: Whenthecassettepositionsareunevenduetothemechanicaladjustment,adjustthembylooseningthescrewatleftside.
F-9-50
8)MakecopiesusingtheCassette1and2,and checkthattheleftedgemarginis2.5+/-1.5mm.
9-29
9
MarginAdjustment(2ndside)
9-30
1)Make2-sidedcopyfromcassette1,andcheck 2) If the left margin is out of the specification, change the adjustment value for the left margin on the 2nd side in cassettte 1. thattheleftmarginis2.5-/+2.0mm. COPIER>ADJUST>FEED-ADJ>ADJ-C1RE;1incrementofthevaluereducestheleftmarginby0.1mm 3)Asfortheadjustmentvalueforsideregistrationonthe2ndsideincassette2,enterthesamevalueastheadjustmentvaluefortheleftmarginonthe Feeding direction 2ndsideincassette1. of paper COPIER>ADJUST>FEED-ADJ>ADJ-C2RE image 4)Tomakethesettingvalueeffective,turnOFF/ONthemainpoweroftheHostMachine. 5)Make2-sidedcopyfromcassette2,andcheckthattheleftmarginis2.5-/+2.0mm. 6) If the margin is out of the specification, change the adjustment value for the left margin on the 2nd side in cassette 2. COPIER>ADJUST>FEED-ADJ>ADJ-C2RE;1incrementofthevaluereducestheleftmarginby0.1mm. 7)Writedownthenewadjustmentvalueontheservicelabel. ADJ-C1RE F-9-51 ADJ-C2RE 8)ExitfromServiceMode.
L1
MarginAdjustmentwithMultiPurposeTray(1stside;mechanicaladjustment)
1)PlacepaperontheMultiPurposeTray.See thelabelonmanualfeedareatoplacepaper. 2)MakecopyfromtheMultiPurposeTray,and checkthattheleftmarginis2.5-/+1.5mm. Feeding direction of paper
image
<In the case that the left margin is out of specification> 3)RemovepaperontheMultiPurposeTray. 4)OpentheMultiPurposeTrayintheconditionwherethe MultiPurposeTraySubCoverisopened.
L1
F-9-52
F-9-53
9-30
9
5) Loosen the fixing screw for the Multi Purpose Tray Upper Cover.
9-31
6)MovetheMultiPurposeTrayUpper Coverbackandforthaccordingtothe value confirmed in step 2). Moving the MultiPurposeTrayUpperCovertothe rearofthisequipmentincreasestheleft margin.
Screw
F-9-54
F-9-55
7) Tighten the fixing screw for the Multi Purpose TrayUpperCover. 8)PlacepaperontheMultiPurposeTray. 9)MakecopyfromtheMultiPurposeTray,and checkthattheleftmarginis2.5-/+1.5mm.
9-31
9-32
MarginAdjustmentwithMultiPurposeTray(2ndside)
1)Make2-sidedcopyfromthemanualfeedtray,andcheckthattheleftmarginonthe2ndsideis2.5-/+2.0mm. 2) If the left margin is out of the specification, change the adjustment value for the left margin on the 2nd side from the Multi Purpose Tray. COPIER>ADJUST>FEED-ADJ>ADJ-MFRE;1incrementofthevaluereducestheleftmarginby0.1mm. 3)Tomakethesettingvalueeffective,turnOFF/ONthemainpoweroftheHostMachine. 4)Writedownthenewadjustmentvalueontheservicelabel. ADJ-MFRE
Lead-edgeMarginAdjustment(1stside)
1)Makecopyfromcassettte1,andcheckthat thelead-edgemarginisL1=4.0+1.5/-1.0 mm.Ifthelead-edgemarginisoutofthe specification, go through the following steps to makeadjustment.
L1
F-9-56
9-32
9
Lead-edgeMarginAdjustment(2ndside)
1)Make2-sidedcopyfromcassette1,and checkthatthelead-edgemarginonthe2nd sideisL1=4.0+1.5/-1.0mm.Ifthelead-edge margin is out of the specification, go through thefollowingstepstomakeadjustment.
L1
9-33
F-9-57
9-33
9
InstallingOtherParts
9-34
CAUTION:DonotattachtheServiceBookCasetothefollowinglocation:
F-9-58
F-9-59
9-34
9
<StampCartridgeinthecaseofDuplexColorImageReaderUnit-B1> 1)OpentheADF. 2)PulltheleveratupperareaoftheADF, andopenthecoveroftheADFreading area.
9-35
3)OpentheStampCover.
F-9-60
F-9-61
4)Usingtweezers,installtheStamp Cartridgewithitsstampsidefacesup.
F-9-62
9-35
9-36
Feed Cover
Separation Guide
F-9-63
F-9-64
3)ClosetheFeedCoverandtheSeparation GuideoftheDADF.
x2
F-9-65
9-36
9
CheckingNetworkConnection
Overview
9-37 PingOperationProcedure
CAUTION: PingcommandcannotbeexecutedtoWindowsVistaPCfromtheHostMachine. ToexecutePingcommandtoWindowsVistaPC,disabletheFireWall.Or,executePing commandtotheHostMachinefromWindowsVistaPC. 1)Select[Settings/Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4 Settings]>[PINGCommand]. 2)EnterIPaddresswithnumerickeypadonthecontrolpanelandpress"Start"key. "Responsefromthehost"isdisplayedifPingoperationissuccessful."Noresponsefrom thehost"isdisplayedifPingoperationfails.
CheckingNetworkConnection
CAUTION: Usethenetworkcableofrank5eorhigher.Inaddition,useofshieldtype(STPcable) isrecommended. Whennon-shieldtype(UTPcable)isused,thesurroundingelectronicequipmentsmay beinterferedviathenetworkcable. 1)TurnOFFthemainpowerswitch. 2)ConnectthenetworkcabletothehostmachineandturnONthemainpowerswitch. 3)Informthesystemadministratorattheinstallationsitethattheinstallationofthehost machineiscomplete,andaskfornetworkconnectionofthehostmachine. MEMO: Networksettingcannotbeexecutedunlesslogginginasanadministrator. Factorydefaultpasswordisasfollows.
CheckingwithRemoteHostAddress
You can check whether the network is connected or not by using remote host address to executePing. Remotehostaddress:IPaddressofPCterminalthatisconnectedto/workswithTCP/IP networkenvironment,whichconnectstothishostmachine. 1)InformthesystemadministratortoexecutecheckingofnetworkconnectionusingPing. 2)Checktheremotehostaddresswiththesystemadministrator. 3)EntertheremotehostaddresstoPING.
SystemadministrationdivisionID:7654321 Systemadministrationpassword:7654321
"Responsefromthehost":Themachineisproperlyconnectedtothenetwork. "Noresponsefromthehost":Executethefollowingtroubleshootingbecausethe
machineisnotconnectedtothenetwork.
CAUTION: FollowingsettingneedstobeONtoperformnetworksetting:
[Settings/Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4
Settings]>[UseIPv4] 4)TurnOFFthemainpowerswitch. 5)TurnONthemainpowerswitch.
9-37
9
TroubleshootingofNetwork
CheckingConnectionoftheNetworkCable
CheckthatthenetworkcableisproperlyconnectedtotheEthernetport.
9-38 CheckingNetworkFunctionontheMainController
Checkwiththeloopbackaddress: Select:[Settings/Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4 Settings]>[PINGCommand],andentertheIPaddress"127.0.0.1"withthenumerickeypad andpresstheExecutekey. Ifthedisplayshows"Responsefromthehost",thenetworkofthemaincontrollerisproperly functioning. Ifthedisplayshows"Noresponsefromthehost",thenetworkfunctionofthemaincontroller isfaulty. Replacewithamaincontrollerthatworksproperly,andthecheckconnection.
PingOperationProcedure
Askthenetworkadministratorattheuser'ssitetonotetheIPaddressofthePCthatis connectedtothenetwork. Select:[Settings/Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4 Settings]>[PINGCommand],andentertheIPaddressofPCwiththenumerickeypad,and thenpress"Executekey. Ifthedisplayshows"Responsefromthehost",thenetworkconnectionisproperlyfunctioning. Ifthedisplayshows"Noresponsefromthehost",gotothenextstepforanotherchecking. MEMO: CheckingofIPaddressofPCisavailablebytheprocedurebelow: OnWindowsPC,gothroughthefollowing:Start>Program>Accessory>Command Prompt, and enter ipconfig and press the Enter key. IP address information will be displayed.
CheckingNetworkSettingoftheHostMachine
Check if the IP address specified on the host machine is correct. Select the following: [Settings/ Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4Settings]>[IPAddress Settings], and note the IP address in the IP Address field. Select the following: [Settings/ Registration]>[Preferences]>[Network]>[TCP/IPSettings]>[IPv4Settings]>[PING Command],andentertheIPaddress.Ifthedisplayshows"Responsefromthehost",theIP address specified on the host machine is correct. If the display shows "No response from the host",gotothenextstepforanotherchecking. MEMO: Whenenteringanaddressbymanualoperation,settheSubnetMaskaccordingtothe instructionsoftheuseradministrator.
9-38
9
PrinterCover-C1
CheckingtheContents
CAUTION:
9-39
The parts [2] to [4] are included in the contents in a state affixed onto the Printer Cover [1].
F-9-66
9-39
9
TurningOFFtheMainPowerSwitch
9-40
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
InstallationProcedure
1)MovetheControlPanelinthedirectionofthearrow. 2)MovetheControlPanelMountCoverinthedirectionofthearrow.
1screw
F-9-67
F-9-68
3)Checktheinstallingpositionofthe2Joints(Right).InstallthemontheLmarkingsideiftheyareontheHmarkingside.
F-9-69
9-40
9
4) Place the Printer Cover by fitting to the positioning pins.
9-41
F-9-70
5)FixthePrinterCover.
2screws(Binding;M4x8) 1steppedscrew(M4)
CAUTION:
USB Cable
Alignthescrewinleftsidetotheemboss
and tighten first.
EnsurenottopinchtheUSBcable.
(IftightenascrewafterremovingUSBcable, ensuretore-installtheUSBcable.)
x3
Stepped Screw
Embosses
F-9-71
9-41
9
6)InstalltheReaderFixingHookB. 2screws(FlatHead;M4x6) 7)InstalltheReaderFixingHooksAandC afteradjustingittotheemboss. 2screws(Binding;M4x8)
9-42
x2
x2
Emboss
Fixing Hook C
F-9-72
10)ReturntheControlPanelMountCover. 11)ReturntheControlPanel.
x6
9-42
9-43
2.5inch/80GBHDD-C1/2.5inch/250GBHDD-D1
Pointstonoteatinstallation
1)Thereare2typesofinstallationproceduresonthisequipment:"Replacement"toboosttheHDDcapacityforstandardHDDand"Expansion"toinstallthe2HDDs.Seethefollowingforthose 2typesofprocedures. 2)WhenreplacingtheStandardHDDtotheHighCapacityHDD(2.5inch/250GBHDD-D1),itisrequiredtobackuptheStandardHDDbeforethereplacement.Fordetails,referto"PointstoNote RegardingDataBackup/Export".Inaddition,installationwithSSTwillberequiredaftertheinstallation.Fordetails,referto"ProcedureAfterInstallingtheHighCapacityHDD". 3)WhenchangingthisequipmenttotheRemovableHDDorwhenexpandingtheRemovableHDD,otheroption"RemovableHDDKit-AC1"isrequired. Fortheinstallationprocedure,refertothefollowinginstallationprocedures.
Itemin"RemovableHDDKit-AC1"describedinthismanual
4)Toexpandthisequipment,besuretoinstallthe2HDDswithsamecapacity. 5)Whenexpandingthisequipmentintothehostmachine,otheroption"HDDMirroringKit-D1"or"HDDDataEncryption/MirroringKit-C1"isrequired. Fortheinstallationprocedure,refertothefollowinginstallationprocedures.
Itemin"HDDMirroringKit-D1"describedinthismanual RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption&MirroringKit-C1.
6)Installationproceduresarethesamebetweenthe2.5inch/80GBHDD-C1and2.5inch/250GBHDD-D1
.
WheninstallingtheHDDoptions(5productsindicatedbelow),refertothepagesindicatedinthefollowingtable.
ReferencePagesintheManual
p.9-43top.9-56 p.9-57top.9-75 p.9-43top.9-56,p.9-76top.9-21 p.9-57top.9-21 p.9-43top.9-56 RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption&MirroringKit.
9-43
9-44
PointstoNoteRegardingDataBackup/Export
Beforeperformingworkthatwillresultinthelossofdata,informthesystemadministratoroftheinevitableloss,askinghimtomakeabackuporexportofimportantdataitems.Backuporexportwork mustnotbeperformedbytheservicepersonbecauseofsecurityconsiderations.InthisInstallationProcedure,aseriesofbackuporexportproceduresaredescribedforreference. Data to be Deleted Availability of Backup
InformationregisteredintheAddressBook SettingsmadefromtheSettings/Registrationscreen ForwardingSettings License files for MEAP applications MEAPapplications DatasavedusingMEAPapplications FavoriteSettingsregisteredintheCopyandMailBoxfunctions SendFunctionFavoriteSettings DatastoredinMailBoxesortheAdvancedBox ScanmodesregisteredintheSendFunction Unsentdocuments(documentswaitingtobesentwiththeDelayedSendmode) ImageformsstoredintheSuperimposeImage MEAPSMS(ServiceManagementService)password (thepasswordwillreturntoitsdefaultpasswordifitwaschanged)
Yes Yes *1 Yes Yes No Yes *2 No Yes Yes *3 No No Yes No No Yes No No No Yes *4 No Yes *5 Yes Yes
Joblogs UserauthenticationinformationregisteredintheLocalDeviceAuthenticationuserauthenticationsystemofSSO-H(SingleSign-OnH) RegistrationinformationfortheNetworkPlace Key Pair and Server Certificate LoginformationfortheIPaddress/MACaddressrestrictionsettings PasswordthatisprotectedbyTPM EncryptionkeythatisprotectedbyTPM InformationforWebbrowsersettings QuickMenuInformation UserInformationoftheAdvancedBox
T-9-5
*4 You may not be able to back up, depending on the type of the password. *5OnlythestoredFavoriteSettingscanbebackedup.
9-44
9
ListofDataCapableofBackup
Data to be backed up
AddressBook Settings/Registrationsettings DeviceSettings(ForwardingSettings,AddressList,FavoriteSettings) PrinterSettings PaperInformation FavoriteSettingsforWebbrowser License files for MEAP applications DatasavedbyMEAPapplications DatastoredinMailBoxesortheAdvancedBox ImageformsstoredintheSuperimposeImage SSO-H(SingleSign-OnH)userauthenticationinformation QuickMenuInformation UserInformationoftheAdvancedBox
9-45
Reference
Forinformationonexportingdata,seethe"e-Manual>RemoteUI".
Seethee-Manual>WebAccess. (You can select this if web browser (Option) is installed.) For information on downloading license files, see the "e-Manual > MEAP". DatasavedbyMEAPapplicationsmaybeabletobebackedup,dependingontheMEAPapplication. SeethedocumentationincludedwiththeMEAPapplication. Seethee-Manual>RemoteUI"SettingtheBackupLocationforStoredData". Seethee-Manual>MEAP. Seethee-Manual>QuickMenu. Seethee-Manual>Security.
T-9-6
Caution:WorktoPerformAfterInstallingtheKit
When you start using this product, passwords set for Mail Boxes, Confidential Fax Inboxes, and the Memory RX Inbox are erased. Set these passwords again. Ifyouhaveloggedontothemachineusingaloginservice,suchasSSO-H(SingleSign-OnH)beforeusingthisproduct,youmustselecttheloginserviceagainusingSMS(Service
ManagementService)afterrestartingthemachine.FormoreinformationonusingSMS,seethee-Manual>MEAP.
9-45
9
MakingaBackupoftheData
9-46
3.Settings/RegistrationExportProcedure 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Import/ Export]. 3)Click[Settings/Registration]. 4)Click[Export],andclick[StartExport]. 5) Following the instructions on the window, specify the location to save the file. 4.PrinterSettingsExportProcedure MEMO: Thefollowingitemstobeexportedarethesameastheoneswhicharedistributedby deviceinformationdistribution. 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Import/ Export]. 3)Click[PrinterSettings]. 4)Click[Export],andclick[StartExport]. 5) Following the instructions on the window, specify the location to save the file.
ThedataitemsthathavebeenbackedupmayberestoredwhentheHighCapacityHDDhas beeninstalled. Thesedataitemsarepropertyoftheuser,andtherestorationworkmustbeperformedbythe systemadministrator. ThemethodofrestorationisdescribedintheUsersGuide.SeeTable(Datatobebackedup) inPointstoNoteAboutInstallationoftheInstallationProcedure. 1.ProceduretomakeabackupofAddressBook 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Import/ Export]. 3)Click[AddressList]. 4)Click[Export]. 5)SelectthesaveformatforAddresslist,andclick[StartExport]. 6)Following the instructions on the window, specify the location to save the file. Be sure to set a distinctive name to an export file so that you can recognize it when importing it. MEMO: Exportingthedevicesettingswillexportallcontentsoftheaddresslist.Inotherwords, thereisnoneedforabackupunlessitneedstobedoneindividually.
2.DeviceSettingsExportProcedure 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Import/ Export]. 3)Click[DeviceSettings(ForwardingSettings,AddressList,FavoriteSettings)]. 4)Click[Export],andthenclick[StartExport]. 5) Following the instructions on the window, specify the location to save the file.
9-46
9
5.PaperInformationExportProcedure 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/
9-47
7.StopofMEAPApplications,Disabling,DownloadofDisabledLicenseFilesand Uninstallation 1)SelecttheURLgivenbelowandaccessSMS. http://[IPaddressofthedevice]:8000/sms/ ThedefaultpasswordisMeapSmsLogin.Iftheuserhaschangedthepassword,askhim/ hertochangethepasswordagainaftertheuseoftheHighCapacityHDDisstarted. Caution: ThedefaultpasswordisMeapSmsLogin.Iftheuserhaschangedthepassword,ask him/hertochangethepasswordagainaftertheuseoftheHighCapacityHDDis started. 2)Click[MEAPApplicationManagement]. 3)Click[Stop]buttonoftheapplicationyouwanttostopontheMEAPApplication Managementpage. 4)Clicktheapplicationofwhichlicensehasbeeninstalled. 5) Click [License Control], and then click [Disable]. Click [Yes] in a confirmation window for disablingthelicense. 6)Click[Download]under"Download/deleteDisabledLicenseFile"item.Followingthe instructions on the window, specify the location to save the file. Set a distinctive name for the disabled license file so that you can recognize it for which application. After you download the disabled license file to your PC, click [Delete]. Click [Yes] in a confirmation windowforlicensedeletion. 7)ReturntotheMEAPApplicationManagementpage,click[Uninstall]buttonofthe application you want to uninstall. Click [Yes] in a confirmation window for uninstallation. If thereareseveralapplications,repeattheprocedures1)to7). 8)AftertheuseoftheHighCapacityHDDisstarted,re-installtheapplicationusingan application file (jar file) of each application from SMS and the disabled license file (lic file).
IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Import/ Export]. 3)Click[PaperInformation]. 4)Click[Export],andclick[StartExport]. 5)Following the instructions on the window, specify the location to save the file. 6.BackupofMEAPApplication WhenaMEAPapplicationhasbeeninstalled,thedataandlicensethattheMEAPapplication retainswillbedeleted.IfnoMEAPapplicationisinstalled,thereisnoneedtomakeabackup. IfaMEAPapplicationhasabackupfunction,makeabackupofthedatapeculiartothe MEAPapplicationusingthisfunction.Withregardtothelicense,thereisaneedtostopall applicationsfromSMS(ServiceManagementService),invalidatethelicense,anddownload the invalid license file. Caution:MEAPBackupFunctionUsingtheSST DatathathasbeenbackedupusingMEAPbackoftheSSTbeforetheuseoftheHigh CapacityHDDisstartedmustnotbewrittenbacktothehostmachineaftertheuseof theHighCapacityHDDisstarted.Similarly,evenifthedatathathasbeenbackedup aftertheuseoftheHighCapacityHDDisstartediswrittenbacktothehostmachine beforetheuseoftheHighCapacityHDDisstarted,themachinedoesnotoperate.It isnecessarytomakesurethattheimplementationconditionsfortheHighCapacity HDDarecompatiblebeforeandaftermakingabackupofdata,andtheMEAPbackup functiondoesnotpermitmakingabackupofdatainthecourseofinstallingthekit. TheoverviewofproceduresforstopofMEAPapplications,Disablingofthelicense,and download of an Disabled license file is described below. For more information, see the MEAP SMSAdministratorGuide.
9-47
9-48
9.BackupofUserinboxandAdvancedBoxdocumentdata Caution:Backupof"AdvancedBox" AdvancedBoxinalargecapacityHDDcannotbebackedup.Onlyrestoringthedata backedupfromastandardHDDcanbeperformed. Dependingonthesystemversionofthemachine,bothbackupandrestorationmight notbeperformed. Theprocedureofbackupandrestorationofaboxdocumentdataisdescribedbelow. Specifythebackupdestinationofadocumentdata: Specifyanaddress,ausername,apassword,andapathtotheSMBserverwhereabackup ofadocumentdata. Caution:Datawhichcannotbebackedup Ifyoubackup/restorestoreddatawithoutrestartingthemachineafterchangingthe languagedisplayedonthetouchpaneldisplaybypressing[Settings/Registration]> [Preferences]fromthecontrolpanelofthemachine,thestoreddatamaynotbebacked up/restoredproperly.Formoreinformationonthedatathatcannotbebackedup,see PointstoNoteforInstallation.
8.UserAuthenticationInformationRegisteredbySSO-H(SingleSign-ONH) InthecasethattheMEAPloginapplicationhasbeenchangedtoSSO-H,thereisaneedto makeabackupoftheuserauthenticationinformation. 1)AccesstheURLgivenbelow. http://[IPaddressofthedevice]:8000/sso/ ThedefaultpasswordisMeapSmsLogin.Iftheuserhaschangedthepassword,askhim/ hertochangethepasswordagainaftertheuseoftheHighCapacityHDDisstarted. Caution: ThedefaultpasswordisMeapSmsLogin.Iftheuserhaschangedthepassword,ask him/hertochangethepasswordagainaftertheuseoftheHighCapacityHDDis started. 2)LoginwiththeusernameandpasswordregisteredasanadministratorinSSO-H. Thedefaultadministratorusernameandpasswordareasfollows: UserName:Administrator Password:password 3)Click[UserControl]. 4)PutacheckmarktoSelectAll,andthenclick[Export]. 5) Leave the file format and character code as defaults and click [Start Export]. 6) Following the instructions on the window, specify the location to save the file and click [Save].
Caution: If the language setting in the common specification settings (Settings/Registration) is settoON,'hostaddress'and'pathtofolder'mightnotbedisplayedcorrectlyorcannot bereferred.
Caution:
Regardingthemethodofinputtingcharacters,see'BasicOperations'inthee-Manual. Ahostaddresscanbeupto128charactersin1byteor64charactersin2bytesusing
the'Kana-Kanji,''Katakana,''alphanumericcharacter,''mark,'and'codeinput'modes.
Apathtothefoldercanbeupto255charactersin1byte(127charactersin2bytes). Ausernamecanbeupto128charactersin1byteor64charactersin2bytesusing
the'Kana-Kanji,','Katakana,''alphanumericcharacter,''mark,'and'codeinput'modes.
Apasswordcanbeupto7to48charactersusingthe'alphanumericcharacter'and
'mark(1byte)'modes.
Thevoicesoundsymbolandthesemi-voicesoundsymbolenteredinthe'Katakana(1
byte)'modearecountedupasone1-bytecharacter.
9-48
9
[Backup method of User inbox and Advanced Box document data]
9-49
10.QuickMenuInformationExportProcedure 1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)SelectBasicTools>[QuickMenu]>[Export]. 3) If the file needs to be encrypted, enter the password after check [Encrypt file]. (The numberofcharactersforthepasswordmustbemorethan4butlessthan16.) 4)Click[Export]. 5) Following the instructions on the window, specify the location to save the file. 11.UserInformationoftheAdvancedBoxExportProcedure
IfanyofthehostIPaddress,username,password,orpathtothefolderisnot
correctlyentered,abackupcannotbemade.
Setthenumberofusersaccessibletothefolderto'2'orhigher,or'norestriction'.If
themaximumnumberofusersissetto[1],restorationcannotbedoneproperly.
Ifyouselecttoencryptthebackupdata,thebackupprocessmaytakelonger.
[Restoring the backup data of User inbox and Advanced Box document data] 1)Select[Settings/Registration]>[ManagementSettings]>[DataManagement]>[Restore]. 2)Click[DisplayBackupData]. 3)Selectthebackupdatatorestorefromthelistandthenclick[Execute]. Caution:
1)AccesstheURLgivenbelow,andthenaccessRemoteUI. http://[IPaddressofthedevice]/ IfthesystemadministratorIDandpasswordareset,adialogboxtoentertheusername andpasswordappears.EnterthesystemadministratorIDinUserNameandthepassword inPassword,andthenclick[AdministratorLogin]. 2)SelectBasicTools>[UserAccessControlforAdvancedBox]. Thedialogboxtoentertheusernameofadministratorandpasswordappears,enterthe systemadministratorIDandpassword,andthenclick[LogIn]. Thedefaultadministratorusernameandpasswordareasfollows: UserName:Administrator Password:password 3)Click[Export],andclick[StartExport]. 4) Following the instructions on the window, specify the location to save the file.
Ifyouwanttorestoreencryptedbackupdata,enterthesamepasswordusedwhen
backingupthedata.
Dependingonthesettingsofthemachine,thebackupdatamaynotbecompletely
restored,orsomedocumentsmaybeautomaticallyprinted.
Restorationisperformedafteralloftheboxdatastoredinthemachine,ordocuments
thatarebeingsent,received,orstored,areerased.
9-49
9
CheckingtheContents
9-50
MEMO: Configuration of contets is the same between the 2.5inch/80GB HDD-C1 and 2.5inch/250GB HDD-D1.
[2] HDD x 1
[4] Spacer x 4
<CD/GUIDS>
F-9-74
NoticeforFCC/IC ChinaRoHSNotice3
TurningOFFtheMainPowerSwitch
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
9-50
9
InstallationProcedure
AssemblyofOptionHDD
9-51
Option HDD
x4
Spacer
Vibration-prevention Dumpe
F-9-75
Caution:
Label
AssemblingtheoptionHDD,becarefuloftheinstallation
direction.
MakesurethatthelabelontheoptionHDDisfacingup. Makesurethat[A]partofHDDSupportPlateisplacedatthe
oppositesideofconnector.
[A]
Connector
F-9-76
9-51
9
RemovingtheHDDUnit
1)OpentheRightRearCover1.
9-52
2)OpentheHDDLidbehindtheRightRearCover1. 1screw
3)RemovetheSignalCableandthePowerCablefromtheHDD.
x2
Signal Cable
Power Cable
4)PuttheSignalCableandthePowerCableasidesothatthayarenotpinched betweentheControllerBoxandtheHDDUnit.
5) Rmove the HDD Unit by holding it as shown in the figure below. 2screws
x2
F-9-80 F-9-81
9-52
9-53
ReplacementProceduretoBoosttheHDDCapacity
1) Remove the fixed HDD from the removed HDD Unit. 2screws(Removedscrewwillbeusedinstep2).) 2)InstalltheOptionHDD. 2screws(Thescrewremovedinstep1).)
x2
x2
F-9-82
F-9-83
[A]
Grounding Plate
9-53
9
ExpansionProcedureforMirroring
1)InstalltheassembledOptionHDDtotheremovedHDDUnit. 2screws(TP;M3X6)
9-54
x2
F-9-85
[A]
Grounding Plate
[A]
Grounding Plate
F-9-86
9-54
9
2)InstalltheenclosedHDDConnectionPlatetotheMirroringKit-D1or theHDDDataEncryption/MirroringKit-C1. 4screws(TP;M3X6)
9-55
3)InstalltheHDDUnittothehostmachine.
x4
F-9-87
9-55
9-56
4.DownloadingtheSystemSoftware 1)Clickconnect. 2)Fromthelistofmachineseries,selecttheappropriatemodel. 3)Select'single',andclickstart. 4)ExecuteHDDformat. 5)After5secfromwhenthepowerofthehostmachineisturnedOFF,restartthehost machineindownloadmodeofsafemode. 6)When"downloadmode"isdisplayedonthecontrolpanel,clicksimplemodestart. 7)Clickstarttoexecutedownload. 8)Followtheinstructiononthescreenandwhendownloadiscomplete,clickOK. 9)ExitSST. 10)ChecktheversionsofMN-CONTandLANGetcinservicemode.
ProcedureAfterInstallingtheHighCapacityHDD
InstallationprocedureInstallingtheSystemSoftwareUsingthe SST
ThesystemdatastoredontheHDDandusedtocontrolthehostmachinewillbelostwhen the machine is first started up after installing the High Capacity HDD. Itisimportanttoinstallthesystemsoftwareusedtocontrolthehostmachinesothatthe machinemaystartupproperlyafterinstallationoftheHighCapacityHDD. Detailsfollow. 1.Requirements 1)PC Servicesupporttoolintheversionthatsupportsthishostmachinemustbeinstalled. 2)CrossEthernetCable 2.PreparingfortheInstallationoftheSystemSoftwareofHostmachine 1)IfbothPCandthemachineareon,turnthemoff. 2)ConnectthePCandthemachineusinganEthernetcable. 3)TurnonthePC. 4)Startupthemachineindownloadmode(safemode). 3.SelectingtheSystemSoftware 1)SettheCDcontainingthelatestsystemsoftwareinthePConwhichtheSSTisused. 2)StartuptheSST. 3)Clickcopytocopythesystemsoftware. 4)SelectthedriveinwhichtheSystemSoftwareCDhasbeenset,andclicksearch. 5)Clickcopy. 6)ClickOK.
ExecutionofAutoAdjustGradation
WhentheHighCapacityHDDisinstalledtotheColorhostmachine,themachineinitializes itsHDD,resettingthedatausedforautogradationcorrection. WhenyouhaveinstalledtheHighCapacityHDD,therefore,itisimportantthatyouexecute autogradationcorrection(full)sothatexpectedoutputimagesmaybeobtained.
9-56
9
RemovableHDDKit-AC1
PointstoNoteatInstallation
9-57
1)Whenexpandingbyinstallingthe2HDDs,otheroption"2.5inch/80GBHDD-C1/2.5inch/250GBHDD-D1"isrequired. 2)WhenreplacingtheStandardHDDtotheHighCapacityHDD(2.5inch/250GBHDD-D1),itisrequiredtobackup/exporttheStandardHDDbeforethereplacement.Inaddition,installationwithSSTwillbe requiredaftertheinstallation. Fordetails,refertothefollowingitemin2.5inch/80GBHDD-C1/2.5inch/250GBHDD-D1ofthismanual. Forbackup/exportprocedure:PointstoNoteRegardingDataBackup/Export Forprocedureafterinstallation:ProcedureAfterInstallationoftheHighCapacityHDD 3)Wheninstalling2HDDs,otheroption"HDDMirroringKit-D1"or"HDDDataEncryption/MirroringKit-C1"needstobeinstalled.Fortheinstallationprocedure,refertothefollowinginstallationprocedures. Itemin"HDDMirroringKit-D1"describedinthismanual RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption&MirroringKit-C1. 4)Toexpandthisequipment,besuretoinstallthe2HDDswithsamecapacity.
WheninstallingtheHDDoptions(5productsindicatedbelow),refertothepagesindicatedinthefollowingtable.
ReferencePagesintheManual
p.9-43top.9-56 p.9-57top.9-75 p.9-43top.9-56,p.9-76top.9-21 p.9-57top.9-21 p.9-43top.9-56 RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption& MirroringKit. p.9-57top.9-75 RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption& MirroringKit.
T-9-7
7 RemovableHDDKit+HDDDataEncryption&MirroringKit 8 HDD(80GB/250GB)+RemovableHDDKit+HDDDataEncryption&MirroringKit
9-57
9
CheckingtheContents
[1] Hinge Shaft Stopper x 2 [2] HDD Handle x 2
9-58
1 [13]
F-9-88
9-58
9
[16] HDD Drawer Unit x 1
9-59
[18] Screw (P Tight; M3X8) x 4
F-9-89
*1ThisisusedwheninstallingtheHDDMirroringKit-D1 *2ThisisusedwhenonlythestandardHDDofhostmachineisusedforaremovableHDD.
TurningOFFtheMainPowerSwitch
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
9-59
9
InstallationProcedure
InstallingtheRemovableHDDKit
1)OpentheRightLowerCover.(OpentheRightUpper Coversimultaneously.)
9-60
x3
Claw
F-9-90 F-9-91
5)RemovetheUSBCableandtheControlPanelCommunicationCable.
x2 x2
USB Cable
x2
Wire Saddles
Connectors
F-9-92 F-9-93
9-60
9
6)Removethe2screws,openthegripin2places.
9-61
7)Holdthe2Grips,andpullouttheMainControllerPCB1 approximately10mmtowardfront.
x2
Grips
F-9-94 F-9-95
8)RemovetheLeftRearCover.
9)WhentheReaderisinstalled,removetheReaderCommunicationCable.
x2
claw
x5
F-9-96
F-9-97
9-61
9
10)RemovetheLeftRearSubCover.
9-62
11)RemovetheRearCover.
1screw 1hook
hook
x2
claw
F-9-98
F-9-99
12)OpentheControllerBoxwhileavoidingtheharness.
2screws
x2
x3
Harness
Harness
F-9-101 F-9-100
9-62
9
13)RemovetheControllerCover. 11screws(loosen)
9-63
14)RemovetheSignalCable andthePowerCable.
Cable Retainer
Edge Saddle
x2 x4
Wire Saddles Signal Cable Fan Cable Power Cable Connectors
F-9-102
F-9-103
15)OpentheHDDLid. 1scrwe(Removedscrewwillnotbeused.)
16)RemovetheSignalCableandthePowerCable.
x2 x7
Edge Saddl Signal Cable Power Cable Edge Saddle Wire Saddle
F-9-105
F-9-104
9-63
9
17)RemovetheHDDUnitby holding it as shown in the figure below. 2screws(Removedscrewwill notbeused.)
9-64
x2
F-9-106
x2
x4
9-64
9-65
Connector
Screw hole
F-9-109
20) Install the HDD Connector Plate first, and thenHDDtotheHDDSupportPlate.(HDD GroundingPlateandscrewaretheones removedinstep19).) 1HDDGroundingPlate 4 screws (1 piece is used to fix the HDD GroundingPlatealtogether.)
HDD
21)FixtheGroundingPlate. 1screw(TProundend;M3X6)
x4
HDD Connector Plate
F-9-111
9-65
9-66
22)PurchaseoptionHDDandassemblethesecond HDD. 1OptionHDD 1HDDSupportPlate(enclosedwithoptionHDD) 1HDDConnectorPlate 4Vibration-preventionDumpers(enclosedwith optionHDD) 4spacers(enclosedwithoptionHDD) 1HDDGroundingPlate(enclosedwithoption HDD) 1screw(TProundend;M3X6)(enclosedwith removableHDDKit) 4 screws (binding with flat washer; M3X14) (enclosed with option HDD) (1 piece is used to fix theHDDGroundingPlatealtogether.)
Option HDD
x5
TP round end; M3X6
Vibration-prevention Dumpe
F-9-112
23)InstalltheConversionConnector.
x2
Bosses
Hole
F-9-113
F-9-114
9-66
9
25)InstalltheHDDCover. 1claw 1screw(TProundend;M3X6)
9-67
26)InstalltheHDDHandle. 2screws(TProundend;M3X6)
x2
F-9-115
F-9-116
27)InstalltheHDDDoorGuide. 2claws
x2
Claws
F-9-117
9-67
9-68
F-9-118
HDD Lock Plate Shaft HDD Lock Plate Shaft HDD Lock Plate
F-9-119
9-68
9
29)Adjustthe2bossestothehole andinstalltheHDDLidRetainer. 1screw(TProundend;M3X6)
9-69
Bosses
Holes
F-9-120
x2
F-9-121
9-69
9-70
WhenChanging1FixedHDD(Standard)toRemovableHDD
1)Placeitinthepositionwherethe edgesaddleofHDDDrawerUnit isfacingup,removethelower DrawerCable(Slot.2). 2screws 2springs 2washers 2)RemovetheDrawerCable. 2screws(Removedscrewwillbeusedinstep3).)
x2
x2
Washer Spring Screw
F-9-122
F-9-123
3)InstalltheIVCable. 2screws(screwremovedinstep2))
x2
F-9-124
9-70
9
4)InstalltheIVCableofHDDDrawerUnit.
9-71
5)InstalltheHDDDrawerUnit. 2screws(thescrewsremovedinstep28)in<InstallingRemovableHDDKit>)
x2
IV Cable
x2
6)FixthecableoftheDrawerUnit. 3wiresaddles
MEMO:
x3
Wire saddles
[A]
[A]
F-9-127
9-71
9
7)InstalltheIVCable. 1edgesaddle 3wiresaddles 2connectors 1cableretainer
9-72
8)InstalltheConrollerCover.
Cable Retainer
Edge Saddle
x2 x4
Wire Saddles
9)InstalltheHDDBlankingPlatetoSlot.1. 2screws(TProundend;M3X6)
10)InstalltheHDDtoSlot.2(rightside).
x2
F-9-130 F-9-129
9-72
9
11)ClosetheHDDLid. 12)RestoretheControllerBoxCover.
9-73
14)Installtheremovedcoverandthecable. RearCover LeftRearSubCover ReaderCommunicationCable(whenreaderisinstalled) LeftRearCover USBCableandControlPanelCommunicationCable
13) Affix the Shutdowm Warning Label in the appropriate language on the Right Rear Cover1.
F-9-131
15)InstalltheMainControllerPCB1tothehostmachine.
CAUTION:
Liftthehandle,inserttheMain
ControllerPCB1untilitstops,tilt thegripandinstallthe2screws.
x2
Makesuretotiltthegripslowly
onbothsidessimultaneously.
CheckthattheMainController
PCB1isinstalledproperly.
Grips
F-9-132
9-73
9
16)IfReaderisinstalled,installtheReaderPowerCable.
9-74
17)ClosetheRightRearCover1,RightLower Cover,andRightUpperCover.
x2
Wire Saddles
9-74
9-75
Wheninstalling"HDDMirroringKit-D1"or"HDDDataEncryption/MirroringKit-C1"
1)InstalltheHDDDrawerUnit. 2screws(Screwremovedinstep28)in<InstallingtheRemovableHDDKit>) 2)InstalltheoriginallyinstalledHDDtoSlot.1(leftside).
x2
F-9-135 F-9-134
3)InstalltheOptionHDDtoSlot2(rightside).
4)ClosetheHDDLid.
F-9-136
9-75
9
HDDMirroringKit-D1
PointstoNoteatInstallation
9-76
WheninstallingtheHDDoptions(5productsindicatedbelow),refertothepagesindicatedinthefollowingtable.
ReferencePagesintheManual
p.9-43top.9-56 p.9-57top.9-75 p.9-43top.9-56,p.9-76top.9-21 p.9-57top.9-21 p.9-43top.9-56 RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption& MirroringKit. p.9-57top.9-75 RefertotheInstallationManualandInstructionSheetofCASE-1andCASE-2packedwiththeHDDDataEncryption& MirroringKit.
T-9-8
7 RemovableHDDKit+HDDDataEncryption&MirroringKit 8 HDD(80GB/250GB)+RemovableHDDKit+HDDDataEncryption&MirroringKit
9-76
9
CheckingtheContents
<Partstobeused>
1 [1] Signal Cable (450mm (Red); FK2-8435) x 1 1 [2] Signal Cable (80mm (Red); FK2-8436) x 1
9-77
*1 Used when installing the Fixed HDD *2 Used when installing the Removable HDD *3 One piece is used *4 6 pieces are used for this machine. (4 out of 10 pieces are used when installing the Option HDD.) *5 Used when installing the option HDD
F-9-137
9-77
9
<Partsnottobeused>
[1] Signal Cable (340mm (Red); FK2-8434) x 1 [2] Signal Cable (370mm (Blue); FK2-8441) x 1
9-78
[3] Power Cable (320mm; FK2-8467) x 1 [4] LED Board (large) x 1 [5] LED Cable (290mm; FM4-0840) x 1
F-9-138
<CD/Guide>
TurningOFFtheMainPowerSwitch
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
9-78
9
InstallationProcedure
9-79
RemovingtheSignalCableandPowerSupplyCableWhenInstallingtheFixedHDD(Standard)
1)OpentheRightLowerCover.(OpentheRightUpper Coversimultaneously.) 2)OpentheRightRearCover1. 3)RemovetheRightRearCover1. 1screw(RStight;M4) 2screws(TP;M3) 1claw
x3
Claw
F-9-139 F-9-140
5)RemovetheUSBCableandtheControlPanelCommunicationCable.
x2 x2
USB Cable
x2
Wire Saddles
Connectors
F-9-141 F-9-142
9-79
9
6)Removethe2screws,openthegripin2places.
9-80
7)Holdthe2Grips,andpullouttheMainControllerPCB1 approximately10mmtowardfront.
x2
Grips
F-9-143 F-9-144
8)RemovetheLeftRearCover.
9)WhentheReaderisinstalled,removetheReaderCommunicationCable.
x2
claw
x5
F-9-145
F-9-146
9-80
9
10)RemovetheLeftRearSubCover.
9-81
11)RemovetheRearCover.
1screw 1hook
hook
x2
claw
F-9-147
F-9-148
12)OpentheControllerBoxwhileavoidingtheharness.
2screws
x2
x3
Harness
Harness
F-9-150 F-9-149
9-81
9
13)RemovetheControllerCover. 11screws(loosen)
9-82
14)RemovetheSignalCable andthePowerCable.
Cable Retainer
Edge Saddle
x2 x4
Wire Saddles Signal Cable Fan Cable Power Cable Connectors
F-9-151
F-9-152
15)OpentheHDDLid. 1scrwe(Removedscrewwillnotbeused.)
16)RemovetheSignalCableandthePowerCable.(Removedcableswillnotbeused.)
x2 x7
Power Cable
Edge Saddle
Wire Saddle
F-9-154
9-82
9
InstallingtheLEDBoard
1)InstalltheLEDBoard(small). 2screws(TP;M3X6)
9-83
x2
Edge Saddle
F-9-156 F-9-155
Wire Saddle
Cable Guide
x8
[A]
CAUTION:
[B]
Besuretoallowextracableat[A]areaintheconditionthat
theControllerBoxisfullyopened.
Besuretotuckthe[B]areaoftheLEDcableundertheother
Connector
Edge Saddle
Wire Saddle
9-83
9-84
InstallationProcedureWhentheFixedHDDHasBeenExpanded
1)InstalltheMirroringBoardsothat"CHA" and"CHB"areplacedinthedirectionof theHDDslot. 4screws(TP;M3X6)
x4
CHB Direction of the HDD Slot Cable Retainer Edge Saddle
x3
Power Cable
x4
Wire Saddles
Signal Cable
CHA
F-9-158
9-84
9
4)InstalltheControllerCover.
9-85
x4
LED Cable
F-9-160
x5
Wire Saddles
Wire Saddles
Edge Saddle
[A]
F-9-161
9-85
9-86
Slot.2 (HDD2) Slot.1 (HDD1) Signal Cable(Blue) Power Cable CH B Signal Cable(Red) Power Cable
F-9-162
x2
CH A
ConnectSlot1to"CHA".(OriginallyinstalledHDD) ConnectSlot2to"CHB".(NewHDD)
Signal Ccable
Power Cable
F-9-163
9-86
9
8)InstalltheSignalCable(80mm(Red);FK2-8436) andthePowerCable(80mm;FK2-8461)tothe first HDD (Slot 1).
9-87
CAUTION: Installthecablestocorrectpositions.
x2
Signal Cable
Power Cable
F-9-164
x2
F-9-165
9-87
9
10)InstalltheSignalCable(80mm(Blue);FK2-8438) andthePowerCable(80mm;FK2-8461)tothe secondHDD(Slot2).
9-88
CAUTION: Installthecablestocorrectpositions.
x2
Signal Cable Ppower Cable
F-9-166
11)Fixthecableswiththewiresaddle.
CAUTION:
Wire Saddle
Besuretoplacethetagson
Wire Saddle
IfreturningtheControllerBox
F-9-168 F-9-167
9-88
9
12)ClosetheHDDLid. 13)PlacetheControllerBoxtothe originalposition. 14)Installtheremovedcoverand thecable. RearCover LeftRearSubCover ReaderCommunicationCable (whenreaderisinstalled) LeftRearCover USBCableandControlPanel CommunicationCable
9-89
15)InstalltheMainControllerPCB1tothehostmachine.
CAUTION:
Liftthehandle,inserttheMain
ControllerPCB1untilitstops,tilt thegripandinstallthe2screws.
x2
Makesuretotiltthegripslowly
onbothsidessimultaneously.
CheckthattheMainController
PCB1isinstalledproperly.
Grips
F-9-169
16)IfReaderisinstalled,installtheReaderPowerCable.
17)InstalltheRightRearCover1.
x2
Wire Saddles
9-89
9
18) Affix the LED label so that it fits the edge of the Right Rear Cover 1.
9-90
19)ClosetheRightRearCover1,RightLower Cover,andRightUpperCover.
LED Label
F-9-171
9-90
9
ProcedurewhenaddingtheRemovableHDD
1)InstalltheMirroringBoardsothat"CHA"and"CHB"areplacedin thedirectionoftheDCControllerPCB. 4screws(TP;M3X6)
9-91
CAUTION: BesurethatthedirectionofinstallingtheMirroring Board is opposite to the case when the fixed HDD is installed.Ifitisinstalledinawrongdirection,thecables donotreachtheboard.
x4
CHA CHB
F-9-172
2)Installthecablestothe PCBonthebackside. SignalCable(FK2-8432; 660mm)(Usetheexisting cable.) PowerCable(650mm; FK2-8464)(Includedin theRemovableHDDKit) STSCable(550mm; FM4-0842) 3)Fixthecables. 3wiresaddles 1edgesaddle Cableretainer
4)InstalltheControllerCover. Cable Retainer Edge Saddle Power Cable Wire Saddles Signal Cable
x3 x4
Connector
STS Cable
F-9-173
9-91
9
5)Installthe2wiresaddles.
9-92
LED Cable
x4
F-9-174
F-9-175
x9
Wire Saddles
Edge Saddle
Wire Saddles
9-92
9-93
CAUTION:
Ifslackingoffthecablesat[A]part,theymayintereferthefan
[A]
[B]
Wire Saddles
F-9-177
Signal Cable(Red)
ConnectSlot1to"CHA".(OriginallyinstalledHDD) ConnectSlot2to"CHB".(NewHDD)
CH A CH B
Power Cable
F-9-178
9-93
9
8)InstallthecableoftheHDDDrawerUnittotheMirroringBoard.
9-94
9)PlacetheControllerBoxtotheoriginalposition.
x4
Power Cable from front side Signal Cable(Blue) Signal Cable(Red) Power Cable from rear side
F-9-179
F-9-180
9-94
9
12)InstalltheMainControllerPCB1tothehostmachine.
9-95
CAUTION:
Liftthehandle,inserttheMainControllerPCB1untilitstops,tilt
thegripandinstallthe2screws.
x2
Makesuretotiltthegripslowlyonbothsidessimultaneously. CheckthattheMainControllerPCB1isinstalledproperly.
Grips
F-9-181
13)IfReaderisinstalled,installtheReaderPower Cable.
14)InstalltheRightRearCover1.
x2
Wire Saddles
9-95
9
15) Affix the LED label so that it fits the edge of the Right Rear Cover 1.
9-96
16)ClosetheRightRearCover1,RightLower Cover,andRightUpperCover.
LED Label
F-9-183
CheckingOperationAfterInstallation
1)Insertthepowerplugintothesocketandturnonthemainpowerofthehostmachine. 2)Makeasettingofmirroring. Specify"1"under"ServiceMode>COPIER>OPTION>FNCSW>W/RAID". 3)TurnOFF/ONthemainpowerofthehostmachinetoenablethesettingvalue. 4)MakesurethattheUIscreenisactivatedcorrectly. 5)MakesurethattheLEDblinks. HDD1(Slot1):ThegreenLEDblinks. HDD2(Slot2):ThegreenandredLEDsblink.
CAUTION: Rebuildprocessstartsaftersetting1forW/RAID.IfanerroroccursduringtherebuildprocessattheinitialinstallationTheharddiskneedstobereplaced.(Callservicerep.),reexecutethe processwiththefollowingprocedure. 1)CheckthatthelightingredLEDisHDD2. 2)SelectServiceMode>COPIER>OPTION>FNCSW>W/RAID,andset0. 3)Toenablethesettingvalue,turnOFF/ONtheMainPowerSupplySwitchofthehostmachine. 4)SelectServiceMode>COPIER>OPTION>FNCSW>W/RAID,andset"1". 5)Toenablethesettingvalue,turnOFF/ONtheMainPowerSupplySwitchofthehostmachine. Theforegoingprocedureislimitedtotherebuildprocessattheinitialinstallation. Anerrorduringtherebuildprocessthatisexecutedduringoperationisnotincludedintheconsideration.
9-96
9
ReaderHeaterUnit-G1
Checkingthecontents
[1] Reader Heater X 1 [2] Flat Screw(M4X4) X 4
9-97
*:3sheetsareusedinthisInstallationprocedure.
F-9-184
TurningOFFthepoweroftheHostMachine.
BesuretorefertoHowtoDisconnecttheMainPowerintheHostMachineinstallation.
9-97
9
InstallationProcedure
1)OpentheADForCopyboardCover.
9-98
2)RemovetheReaderRightRetainerCover. 2Screws
3)RemovetheReaderCableCover. 2Screws
x2
x2
F-9-185
F-9-186
F-9-187
4)RemovetheCopyboardGlass.
Caution: Whenremovingthe CopyboardGlass,besure not to touch your finger tothewhiteplateinthe surfaceandthebacksideof theglass.Ifitisdirty,clean itwithlint-freepaper.
F-9-188
F-9-189
9-98
9
5)Align3sheetsofheatersheettothemarkingline,andadherethem.
9-99
Marking Line
Heater Sheet
F-9-190
6)InstalltheReaderHeater. 4FlatScrews(M4)
x4
Reader Heater
Guide Shaft
F-9-191
9-99
9
7)Passtheconnectorundertherailasshown.
9-100
F-9-192
Wire
Scanner Rail
F-9-193
9-100
9-101
8)Loosenthescrew,shifttheHarnessGuideinthedirectionofthearrow,passtheharness,andmakespace[A].
[A]
Screw
F-9-194
9)PasstheharnessestotheclawoftheFFCGuidein4places.
x4
F-9-195
9-101
9
10)Puttheharnessthroughthe2edgesaddlesandconnecttheconnector.
9-102
11)Tightenthescrewloosenedinstep8)after adjustingittotheboss.
x2
x2
Edge Saddle
Edge Saddle
F-9-196
12)Installtheremovedcovers. CopyboardGlass ReaderCableCover ReaderRightRetainerCover 13)ClosetheADFortheCopyboard Cover. 14)Insertthepowerplugofmainunit intoasocket. 15)OpentheSwitchCoverandturn themainpowerswitchON.
F-9-197
9-102
9
Checkingaftertheinstallation
9-103
1)RemovetheEnvironmentHeaterSwitchcover.
F-9-198
2)CheckthattheEnvironmentHeaterSwitchisON. 3)TurnON,ifitwasOFF.
4)InstalltheEnvironmentHeater Switchcover.
7)Connectthepowerplugofthehost machinetothepoweroutlet.
F-9-199
F-9-200
9-103
9
CassetteHeaterUnit-37
CheckingtheContents
[1] Cassette Heater Unit x 1
9-104
F-9-201
*Notusedwiththisprocedure.
9-104
9
TurningOFFtheMainPowerSwitch
9-105
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
InstallationProcedure
1)PresstheCassetteReleaseButtontoremovetheCassette. (HostMachine:Cassettes1and2,Cassettepedestal:Cassette3and4)
Cassette 1 Cassette 2 Cassette 3 Cassette 4 Cassette Release Button Cassette Release Button
F-9-202
1claw 2protrusions
Claw
Protrusions
F-9-203
9-105
9
3)Fittheclaws(3places)ontheCassette HeaterUnitintotheholesontheBasePlate, andthen,moveittowardthefront. 3claws
9-106
Cassette Heater Unit Cassette Heater Unit Base Plate Base Plate
Caution: Be sure that the claws are fit into the holesoftheBasePlateproperly.
F-9-204
4)Tightentheremovedscrew(Wsemsroundend;M3X6)withthestubbydrivertoconnecttheconnector. (The figure below shows an example of the Cassette Pedestal. Follow the same step as for the host machine.) Connector
5)InstalltheheaterConnectorCover. 6)InstalltheremovedCassettes.
F-9-205
9-106
9
CheckingAftertheInstallation
9-107
1)RemovetheEnvironmentHeaterSwitchCover.
F-9-206
2)CheckthattheEnvironmentHeaterSwitchisON. 3)TurnON,ifitwasOFF.
4)nstalltheEnvironment HeaterSwitchCover.
5)CheckthatthebreakerswitchinthebackofthemainunitisON. 6)TurnON,ifitwasOFF.
7)Connectthepowerplugofthe hostmachinetothepoweroutlet.
F-9-207 F-9-208
9-107
9
CassetteHeaterUnit-32
CheckingBundledComponents
[3] [6] [5] [1]
9-108
[8]
[4]
[11]
[5]
[2] [7]
[10] [9]
F-9-209
[1]
F-9-210 F-9-211 F-9-212 F-9-213 F-9-214 F-9-215 F-9-216 F-9-217 F-9-218 F-9-219 F-9-220
Heaterunit ACinputconnector Relayharnessunit ACcable Screw(w/washer) Cableprotectionbush Powersupplylabel RStightscrew(M4x8) Wiresaddle Plugcover Bindingscrew(M4x4)
1pc. 1pc. 1pc. 1pc. 2pcs. 1pc. 1pc. 2pcs. 3pcs.(*Only2pcsareusedforthisunit.) 1pc. 1pc.(*Notusedforthisunit.
[2] [3] [4] [5] [6] [7] [8] [9] [10] [11]
TurningOFFtheMainPowerSwitch
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure. Wheninstallingtheheatertothepaperdeck,takethefollowingprecautions: a.TheACpowerplugofthehostmachinemusthavebeenremovedfromtheoutlet. b.Installtheheaterafterinstallingthehostmachineandpaperdeck. c.Usecorrectscrews(lengthsanddiameters)atcorrectpositions.
9-108
9
InstallationProcedure
9-109
1)Removereusableband,andthendisconnectthepaperdeckconnectorfromthehost 2)Releasethepaperdeckfromthehostmachine,andthenpressdownthelatchplateofthepaperdeck machine. housing with your finger to open the housing.
F-9-222 F-9-221
3)Removethreescrews,andthendetachtherightcoverofthepaperdeckinthe directionofthearrowshown.
4)Removefourscrewsandtwootherscrew,andthendetachtherear coverofthepaperdeck.
x3
x6
F-9-223 F-9-224
9-109
9-110
6)Removetwoscrews,andthendetachthetopcover.
5)Removethreescrewsandoneconnector,andthendetachthefront-uppercover.
x3 x1
x2
F-9-225
F-9-226
x1
F-9-227 F-9-228
9-110
9
10)Attachtheheaterconnectortothepanelmount.
9-111
11)Removeonescrewtoremovetheblindplatefromthepowercordmountofthepaperdeck.
x1
F-9-229
F-9-230
12 12)InstallthesuppliedACinputconnectorintwosteps([A]>[B]). Installthegroundcableusingascrewwithtoothedwasher.
13)Installtherelayharnessunittotherearsidepanelofthepaperdeckusingthetwoscrews(M4X8), andthenconnecttheconnector.
[A] [B]
x1
x2
F-9-231 F-9-232
9-111
9-112
15)Reattachtheexteriorcoversofthepaper 16)Manuallyslidethepaperdeckto deckinthefollowingsequence: thelefttoplaceitasideofthehost machine. [1]Topcover(Takecarenottohavecables caught.)(M4X8:2pcs.) [2]Front-uppercover(Insertthe connector.)(M4X8:3pcs.) [3]Rearcover(M3X8:2pcs.,M4X8:4pcs.) [4]Rightcover(M4X8:3pcs.)
14)Windtherelayharness(oneandhalfturns)aroundthecableguidesonthepower cordmount,andthenconnecttheconnector.
F-9-233
F-9-235 F-9-234
9-112
9
19)Remove1screw(bindhead;M4x4)todetachtheplate.
9-113
x1
F-9-236
20)Attachtwowiresaddlestotherearpanelofthehostmachine,andthenconnecttheACcableconnectortothepowercordmountoftheheater. RoutetheACcableasshown,andthenconnecttheotherconnector(plug)tothereceptacleontherearpanelofthehostmachine.
F-9-237
9-113
9-114
Toensuresmoothconnectionoftheheaterpowerconnectors,explaintotheuserthatanyobstaclethatcan preventthepaperdeckfromopeningshouldnotbeplacedinthehatchedarea. [1]:Hostmachine[2]:Paperdeck[A]:Front
21)Fixthesuppliedplugcoveratrearsideofthehostmachinewith1screw(bind head;M4x4)removedatthestep19.
x1
[1]
[A]
F-9-238
[2]
F-9-239
9-114
9
UtilityTray-A1
CheckingtheContents
[1] Utility Tray Unit x 1 [2] Wire Saddle x 5
9-115
*1ThepartsusingtoinstalltheKeyboard.
F-9-240
InstallationProcedure
1)Loosenthe2screwsontheUtilityTrayUnittoseparatetheMountingPlateandtheUtilityTray. 2)Removethe4facesealsfromtheReaderRightCover. Face Seals
Screws
F-9-241 F-9-242
9-115
9
3)InstalltheMountingPlate.
9-116
4screws(TP;M4x10)
x4
F-9-243
4)InstalltheKeyboardTray.
2screws(loosen) 2screws(tighten)(TP;M4x10)
x2
F-9-244
9-116
9
WheninstallingtheKeyboard
1)Removethe2capcoversandinstallthe5wiresaddles.
9-117
Wire Saddle
Cap Cover
F-9-245
9-117
9
KeySwitchUnit-A2
CheckingtheContent
[1] Key Switch Unit x 1 [2] Control Key x 1
9-118
F-9-246
TurningOFFthepoweroftheHostMachine
BesuretorefertoHowtoDisconnecttheMainPowerintheHostMachineinstallation.
9-118
9
InstallationProcedure
1)OpentheRightLowerCover.(OpenalsotheRight UpperCoverinthesametime).
9-119
2)OpentheRightRearCover1. 3)RemovetheRightRearCover1.
x3
F-9-247
Claw
F-9-248
4)RemovetheLeftRearCover.
x2
x5
Claw
F-9-249
9-119
9
5)RemovetheRearCover.
9-120
6)RemovetheConnectorCover. 1Screw
x2
Claw
F-9-250
F-9-251
7)RemovetheconnectoroftheCassettePedestal.(IfthePedestalisnotinstalled,thisprocedureisnotneeded.)
HarnessGuidein6places 5Connectors
Connector
x6 x5
Guide
F-9-252
9-120
9
8)RemovetheRearLowerCover.
9-121
Hook
x2 x2
Claw Claw
Hook
F-9-253
9)RemovetheRightRearCover3. Clawin3places
10)RemovetheRightRearCover2. 2Screws
x3
Claw
x2
Claw
F-9-254 F-9-255
9-121
9
11)RemovetheKeySwitchBracket. 2Screws
9-122
12)InstalltheKeySwitchUnittotheKeySwitchBracket. 1Screw(Binding:M4x6)
x2
F-9-257 F-9-256
13)InstalltheKeySwitchBracketassembledinthepreviousprocedure. 2Screws(usethescrewremovedinstep11)
14)OpentheFeedDriverPCB. 2Screws
x2
x2
F-9-258
F-9-259
9-122
9-123
16)PuttheFeedDriverPCBbackintheoriginalposition.
15)ConnecttheconnectorofthehostmachinewiththeconnectorofKeySwitchUnit.
F-9-260
17)Cutthe[A]partoftheremovedRightRearCover2instep10)withnipper,etc.
[A]
18)Reinstalltheremovedcoversandtheconnectors. RightRearCover2 RightRearCover3 RearLowerCover CconnectoroftheCassettePedestal ConnectorCover RearCover LeftRearCover RightRearCover1 RightLowerCover RightUpperCover
F-9-261
9-123
9
Checkingafterinstallation
1)Connectthepowerplugofthehostmachineintotheoutlet. 2)OpentheswitchcoverandturnONthemainpowerswitch. 3)Setthefollowingservicemodevalueto1. [COPIER] > [FUNCTION] > [INSTALL] > [KEY] 4)TurnOFF/ONthemainpowerswitch. 5)Makesurethat[Setthecontrolkey]isdisplayed.
9-124
6)InserttheControlkeyintotheKeySwitchUnitandmakesurethatthemachineisreadyforcopy.
9-124
9
VoiceOperationKitC1
CheckingtheContents
[1] Speaker Unit X 1
9-125
1 [9]
Screw(Binding; M3X20) X 1
1 [10]
Screw(Binding; M4X6) X 1
F-9-262
9-125
9
PointstonotewhenInstalling
Caution: TheColorImageReaderisnecessarytooperatethisequipment.
9-126
Wheninstallingtheequipment,seethe'CombinationTableofAccessoryInstallation'.
TurningOFFtheHostMachine
BesuretorefertotheHostMachineInstallationHowtodisconnectmainpower.
InstallationProcedure
1)OpentheRightLowerCover(OpenalsotheRight DeliveryUnitinthesametime). 2)OpentheRightRearCover1. 3)RemovetheRightRear Cover1. 1Screw(RSTight;M4) 2Screws(TP;M3) Clawin1place
x3
Claw
F-9-263 F-9-264
9-126
9
4)IfReaderisinstalled,removetheReaderPowerCable.
9-127
5)RemovetheUSBcableandControlPanelCommunicationCable. Control Panel Communication Cable USB Cable
x2 x2
x2
Wire Saddles
Connectors
F-9-265
F-9-266
6)Removethe2screws,openthegripin2places.
x2
Grips
F-9-267
9-127
9-128
8)RemovetheVoiceOperationBoardSupportPlatefromtheMainControllerRollerPCB1. (DonotusetheremovedSupportVoiceOperationBoard.)
7)Holdthegripin2places,removetheMainControllerPCB1whileavoidingtheremovedharness.
2Screws(removedscrewwillbe usedinstep9))
x2
F-9-268 F-9-269
9)InstalltheVoiceOperationBoardUnitintheMainControllerRollerPCB1.
x4
Connector
F-9-270
9-128
9
10)InstalltheMainControllerPCB1tothehostmachine.
9-129
x2
Grip
F-9-271
x2
Wire Saddles
9-129
9
13)RemovetheSmallCoverinstalledintheRightRearCover1.
9-130
14)Cutthe[A]partoftheRightRearCover1withnipper,etc. [A]
1Screw Clawin2places
x2
[A]
F-9-273 F-9-274
15)InstalltheRightRearCover1.
16)ClosetheRightLowerCoverandRightUpperCover.
Rubber Cap
F-9-275
9-130
9
18)RemovetheSpeakerUnit(Lower)fromtheSpeakerUnit.
9-131
19)InstalltheSpeakerUnit(Lower).
2screws(removedscrew willbeusedinstep20))
2Screws(Binding;M4x20)
x2
x2
F-9-276
F-9-277
20)InstalltheSpeakerUnit(Upper).
21)RemovetheCordGuideCover.
2screws(screwsthatremovedinstep18))
x2
F-9-279
F-9-278
9-131
9
22) Peel off the paper liner, and affix the Cord Guide. 23)PeelofftheCoverSeal,andinstallthe2WireSaddles. Cover Seal
9-132
F-9-280
24) nstalltheRingCoretobothsidesoftheDVICable,andremovethecap. I
25) onnectbothsidesoftheDVICablerespectively. C
Ring Core
F-9-281
F-9-282
9-132
9-133
27) assDVICabletotheCordGuide,andinstallthecover. P 28) ixtheDVICabletotheWireSaddle F
26)PasstheDVICablethroughtheholeoftheRightRearCover1,andclosethecover.
F-9-283 F-9-284
9-133
9
SettingCheck
1)Connectthepowerplugofthehostmachinetothepoweroutlet. 2)OpentheswitchcoverandturnONthemainpowerswitch.
9-134
OperationCheck
Whenusing
Enter Service Mode > [COPIER] > [DISPLAY] > [VERSION], and check whether languages to be used for [TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE] are properly installed. Enter Service Mode > [COPIER] > [DISPLAY] > [VERSION], and check whether [ASR-JA/ASR-EN] is properly installed.
Tostoptheuse
1)PresstheResetKeyfor3secsormore.
9-134
9
VoiceGuidanceKit-F1
CheckingtheContents
[1] Speaker Unit (Upper) X 1 [2] Speaker Unit (Lower) X 1
9-135
1 [5]
Cord Guide X 7
F-9-285
9-135
9
*1:3piecesareusedinthisInstallationprocedure. *2:NotusedinthisInstallationprocedure. *3:2screwsareusedinthisInstallationProcedure.
9-136
<CD/GUIDES>
PointstonotewhenInstalling
Caution TheColorImageReaderisnecessarytooperatethisequipment. Wheninstallingtheequipment,seethe'CombinationTableofAccessoryInstallation'.
TurningOFFtheHostMachine
BesuretorefertoHostMachineInstallationHowtodisconnectmainpower.
9-136
9
InstallationProcedure
1)OpentheRightLowerCover.(OpenalsotheRight DeliveryUnitinthesametime.)
9-137
2)OpentheRightRearCover1. 3)RemovetheRightRearCover1.
x3
F-9-286
Claw
F-9-287
4) Ifreaderisinstalled,removetheReaderPowerCable.
x2 x2
x2
Wire Saddles
Connectors
F-9-288 F-9-289
9-137
9
6)Removethe2screws,andopenthegripin2places.
9-138
x2
Grips
F-9-290
7)Holdthegripin2places,removetheMainControllerPCB1whileavoidingtheremovedharness.
8)RemovetheVoiceOperationBoardSupportPlatefromtheMainControllerPCB1.(Donotusethe removedSupportVoiceOperationBoard.)
2Screws(removedscrewwillbe usedinstep9))
x2
F-9-291
F-9-292
9-138
9
9)InstalltheVoiceGuidanceBoardUnitintheMainControllerPCB1.
9-139
x4
Connector
F-9-293
10)InstalltheMainControllerPCB1intheHostMachine.
x2
Grip
F-9-294
9-139
9
11)InstalltheUSBCableandControlPanelCommunicationCable. 12)Ifreaderisinstalled,installtheReaderPowerCable.
9-140
x2
Wire Saddles
13)RemovethesmallcoverinstalledintheRightRearCover1.
14)Cutthe[A]partofRightRearCover1withnipper,etc. [A]
1Screw Clawin2places
x2
F-9-296
[A]
F-9-297
9-140
9
15)InstalltheRightRearCover1.
9-141
17)RemovetheRubberCap,screw,andCoverSealfromtheReaderRightCover.(Donotusetheremoved RubberCap,screwandCoverSeal.) Cover Seal
Rubber Cap
F-9-298
18)InstalltheSpeakerUnit(lower).
19)InstalltheSpeakerUnit(Upper).
2Screws(Bind;M4x20)
1Screw(Bind;M4x6)
x2
F-9-300 F-9-299
9-141
9
20)InstalltheRingCoretobothsidesoftheSpeakerCable.
9-142
21)Removethecoverofthe3CordGuides.
50mm
F-9-301
22) Peel off the paper liner, and affix them in 3 places in the Cord Guide as shown in the figure.
23)ConnectbothsidesoftheSpeakerCablerespectively.
[A]
F-9-302 F-9-303
9-142
9-143
25)PasstheSpeakerCabletoCordGuide,andinstallthe3CordGuidecovers.
24)PasstheSpeakerCablethroughtheholeoftheRightRearCover1,andclosethecover.
F-9-304
9-143
9
Checkingafterinstallation
1)Connectthepowerplugofthehostmachinetothepoweroutlet. 2)OpentheswitchcoverandturnONthemainpowerswitch.
9-144
3)[Settings/Registration]>[Preferences]>[Accessibility]>[VoiceNavigationSettings]>andmakesurethat[UseVoiceNavigation]is[ON]. 4)[Settings/Registration]>[Preferences]>[Accessibility]>[VoiceNavigationSettings]>andmakesurethat[VoiceGuidefromSpeakers]isdisplayed.
OperationCheck
<Duringuse>
1)Pressresetkey3secsormore. 2)Press[MainMenu]inControlPanel. 3)Ifthedisplayinpanelscreenisboxedwithredframe,VoiceGuidanceKitisavailable. IfVoiceGuidanceKitdoesntproperlyoperate,checkthebelow.
Enter Service Mode > [COPIER] > [DISPLAY] > [VERSION], and check whether languages to be used for [TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE] are properly
installed.
<Tostoptheuse>
1)PresstheResetKeyfor3secsormore.
9-144
9
CardReader-C1
PointstoNoteWhenInstalling
Caution:
9-145
ToinstalltheCardReader-C1,theCardReaderMountingKit-B1isrequired.
CheckingtheContents
CardReader-C1
[1] Card Reader Unit x 1 [2] Screw (RS tight; M4X10) X 1 [3] Toothed washer x 1
F-9-305
<CD/Manuals>
ChinaRoHSInstructionSheet
9-145
9
CardReaderAttachment-B1
[1] Card Reader Mounting Plate (front) Unit x 1
9-146
F-9-306
<CD/Manuals>
ChinaRoHSInstructionSheet
TurningOFFtheHostMachin
Refertothehostmachineinstallation[TurningOFFtheMainPower].
9-146
9
InstallationProcedure
Caution:
9-147
1)OpentheRightLowerCover.(RightUpperCoverwill opensimultaneously.)
2)OpentheRightRearCoverUnit1. 3)RemovetheRightRearCoverUnit1.
x3
F-9-307
Claw
F-9-308
9-147
9
4)WhentheReaderisinstalled,removetheReaderPowerCable.
9-148
5)RemovetheUSBCableandtheControlPanelCommunicationCable. Control Panel Communication Cable USB Cable
x2 x2
x2
Wire Saddles
Connectors
F-9-309 F-9-310
6)Removethe2screwsandopenthe2grips.
x2
Grips
F-9-311
9-148
9
7)Holdthe2gripsandremovetheMainControllerPCB1while avoidingtheremovedharness.
9-149
x3
F-9-312 F-9-313
F-9-314
9-149
9
10)InstalltheCardReaderRelayUnit.
9-150
11)InstalltheconnectorofCardReaderExternalRelayHarness.
x3
F-9-315 F-9-316
12)InstalltheConnectorCover.
1screw(screwremovedinstep9))
F-9-317
9-150
9
13)InstalltheMainControllerPCB1tothehostmachine.
9-151
Caution:
Liftthehandle,inserttheMainControllerPCB1untilit
stops,tiltthegripandinstallthe2screws. simultaneously. properly.
x2
Makesuretotiltthegripslowlyonbothsides CheckthattheMainControllerPCB1isinstalled
Grips
F-9-318
14)InstalltheUSBCableandtheControlPanelCommunicationCable. 15)WhentheReaderisinstalled,installtheReaderPowerCable..
x2
Wire Saddles
9-151
9-152
16)PasstheCardReaderExternalRelayHarnessthroughtheRightRearCoverUnit1andinstallit.
x3
Wire Saddle
F-9-320
17)ClosetheRightRearCoverUnit1,RightLowerCoverandtheRight UpperCover.
18)RemovetheJumperfromtheconnectorofCardReaderUnit. (RemovedJumperwillnotbeused.)
F-9-321
9-152
9-153
20)Removethe2BlankingSealfromtheReaderRightCover. Blanking Seal
19)InstalltheCardReaderUnittotheCardReaderMountingPlate(front)Unit.
Wire Saddle
Toothed Washer
F-9-322 F-9-323
21)InstalltheCardReaderInstallationPlate(rear)tothehostmachine.
22)ConnecttheCardReaderExternalRelayHarnesstotheconnectorofCardReaderUnit.
2Screws(TP; M4X12)
1Connector 1EdgeSaddle
Connector
x2
Edge Saddle
F-9-324 F-9-325
9-153
9-154
24)Removethe2coversofCordGuide.
23)InstalltheCardReaderMountingPlate(front)UnittotheCardReaderMountingPlate(rear).
4Screws(TP;M3X6)
CAUTION: Donotpinchtheharness.
x4
F-9-327
F-9-326
25) Remove the backing paper of Cord Guide and put it in the 2 places indicated in the figure. 26)Removethefaceseal,andinstallthewiresaddle.
Wire saddle
Cord Guide
F-9-328
9-154
9-155
29)ConnectthePowerPlugintotheoutlet. 30)OpentheswitchcoverandturnONtheMain PowerSwitch.
27)PuttheCardReaderExternalRelayHarnessthroughthe2placesofCordGuideandinstallthecover. 28)FixtheCardReaderExternalRelayHarnesswiththeWireSaddle.
F-9-329
SettingAfterInstallation
1)ServiceMode 2)Select:[COPIER]>[FUNCTION]>[INSTALL]>[CARD]andenterthecardnumbertobeused(1 to2001). Inputtheminimumcardnumbertobeusedbyauser. 1000cardsfromtheinputtednumbercanbeused. 3)Toenablethesettingvalue,turnOFF/ONthemainpowerswitch. 4)InsertthecardwiththeregisteredcardNo.andmakesurethatitisinstandby.
9-155
9
CopyTray-J1
Checkingthecontents
[1] Copy Tray x 1
9-156
F-9-330
TurningOFFthehostmachine
Refertothehostmachineinstallation:TurningOFFthemainpower.
9-156
9
Installationprocedure
1) Remove the Right Delivery Frame Cover with flat-blade screwdriver. 2Claws claw
9-157
x2
F-9-331
2)InstalltheCopyTray. 2Claws
F-9-332
9-157
9
Settingafterinstallation
9-158
1)ServiceMode. 2) Select: [COPIER] > [OPTION] > [ACC] > [OUT-TRAY] and register 1. 3)TurnOFF/ONthemainpowerswitch. 4)Select:[Settings/Registration]>[FunctionSettings]>[Common]>[PaperOutputSettings]andcheckthat[DeliveryTraySettings]menuis added. 5)SelecteithertrayBorCtocopy,andperformtestcopy. 6)CheckthatthepaperisoutputintheCopyTray. 7)Resetthetrayinaccordancewiththeusersrequest.
9-158
9
Inner2-wayTray-F1
CheckingtheContents
[1] Inner 2way Tray X1 [2] Insert pin X1
9-159
*NotusedinthisInstallationprocedure.
F-9-333
TurningOfftheMainPowerSwitch
Referto"TurningOFFtheMainPowerSwitch"inMainUnitInstallationProcedure.
9-159
9
InstallationProcedure
9-160
1) Release the claw of the Inner 2way Tray Support using flat-blade screwdriver, 2)TurnovertheInner2wayTraySupportandinstalltothehostmachine.
and release the Inner 2way Tray from the host machine.
1Screw(TP;M3x6)
F-9-334
3)InserttheInner2wayTrayto2slotsoftheDeliveryAssembly,andhookittotheslotoftheInner2wayTraySupport.
9-160
9-161
4) Insert the insert pin into the hole of the In Tray, and fix to the Inner 2way Tray Support. 5)SelectcopytotheTrayB,andperformtestConnectthePowerPlugintotheoutlet. 6)OpentheswitchcoverandturnONtheMainPowerSwitch.
F-9-336
Settingafterinstallation
1)ServiceMode 2) [COPIER] > [OPTION] > [ACC] > [IN-TRAY], and set 1 3)TurnOFF/ONthemainpowerswitch. 4)[Settings/Registration]>[FunctionSettings]>[Common]>[PaperOutputSettings]>[OutputTraySettings],andcheckthatmenuisadded. 5)SelectcopytotheTrayB,andperformtestcopy. 6)CheckthatacopyisdeliveredtotheInner2wayTray. 7)Setthetrayinaccordancewithusersrequest.
9-161
9
AdditionalMemoryTypeB(512MB)
Checkingthecontents
[1] Expansion RAM x 1
9-162
F-9-337
Pre-Check
1)Checkthememorycapacity. Service Mode > COPIER > DISAPLAY > ACC-STS > RAM 2)Exittheservicemode.
TurningOFFtheHostMachine
Refertothehostmachineinstallation:TurningOFFthemainpower.
9-162
9
InstallationProcedure
1)RemovetheLeftRearCover.
9-163
x2
Claws
x5
Rubber Caps
F-9-338
F-9-339
3)RemovetheLeftRearSubCover.
4)IfFAXisinstalled,disconnecttheFAXcable. hook
1Screw 1Hook
9-163
9
5)HoldthegripandremovetheMainControllerPCB2.
9-164
2Screws
x2
Grip
F-9-342
6)InstalltheExpansionRAM.
F-9-343
9-164
9
7)InstalltheMainControllerPCB2.
9-165
Caution:
Liftthegripandinsertthe
x2
Makesuretotiltthegrip
CheckthattheMain
Grip
F-9-344
9-165
9
Checkingafterinstallation
9-166
1)AfteraddingtheExpansionRAM,checkthatthememorycapacityisincreased. Service mode > COPIER > DISAPLAY > ACC-STS > RAM 2)Exittheservicemode. .
9-166
9-167
ExpansionBus-F1,IPSecBoard-B2,WirelessLANBoard-B1InstallationProcedure
PointstoNotewhenInstalling
Caution PCIBusExpansionKit-F1isrequiredtosetIPSecBoard-B2andWirelessLANBoard-B1 Whenusingwith"SerialInterfaceKit-K1"or"CopyControlInterfaceKit-A1",install"SerialInterfaceKit-K1"or"CopyControlInterfaceKit-A1"beforehand. ThefollowingRemovingMainControllerPCB1,thereare3proceduresbasedontheinstallationcombination.
ExpansionBus-F1
IPSecSecurityBoard-B2
WirelessLANBoard-B1
Referenceforinstallation
BesuretorefertoToinstallExpansionBus-F1andIPSecBoard-B2atthesametime BesuretorefertoToinstallExpansionBus-F1andWirelessLANBoard-B1andIPSecBoard-B2atthesame time. BesuretorefertoToinstallExpansionBus-F1andWirelessLANBoard-B1andIPSecBoard-B2atthesame time.
T-9-9
9-167
9
Checkingthecontents
ExpansionBus-F1
[1] PCI Bus Expansion PCB 1
1 [2]
9-168
*1ThisisusedwhenconnectingtheIPSecBoard-B2. *22outof5screwsareused.
F-9-345
IPSecBoard-B2
[1] IPSec Security PCB 1 [2] Wireless LAN Auxiliary Plate 1 [3] Screw(TP; M36) 2
*Notused
F-9-346
<CD/Guides> FCC/ICInstructionSheetforUASonly
9-168
9
WirelessLANBoard-B1
[1] Wireless LAN Board x 1 [2] Bulk Head Unit x 1
9-169
1 [8] Antenna
Tape x 1Sheet
F-9-347
9-169
9
*2Notused. *33outof5screwsareused. <CD/Guides>
9-170
*1Besuretokeeptheremainingofthe3sheetsoftape,asitmightbeneededforlateruse.
TurningtheHostMachineOFF
BesuretorefertoHowtoDisconnecttheMainPowerintheHostMachineinstallation.
9-170
9
InstallationProcedure
RemovingtheMainControllerPCB1
1)OpentheRightLowerCover(OpenalsotheRight DeliveryUnitinthesametime).
9-171
2)OpentheRightRearCover1. 3)RemovetheRightRearCover1.
x3
F-9-348
Claw
F-9-349
4)IfReaderisinstalled,removetheReaderPowerCable.
x2 x2
x2
Wire Saddles
Connectors
F-9-350 F-9-351
9-171
9
6)Removethe2screws,openthegripin2places.
9-172
7)Holdthegripin2places,removetheMainControllerPCB1 whileavoidingtheremovedharness.
x2
Grips
F-9-352 F-9-353
9-172
9-173
ToinstallExpansionBus-F1andIPSecBoard-B2inthesametime
1)InstallthePCIBusExpansionPCBinRiserSupportPlate. 2Screws(TP;M3x6)(intheExpansionBus-F1contents) 2)Removethe3screwsoftheMainControllerPCB1,andinstallthe3PCBSpacers. 3Screws(removedscrewwillbeusedinstep3))
x2
x3
F-9-354
F-9-355
3)InstallthePCIBusExpansionPCBbyinsertingittotheconnectoroftheMainControllerPCB1. 3Screws(screwsremovedinstep2)).
4)InstalltheIPSecSecurityPCBbyinsertingittotheconnectorofthePCIBusExpansionPCB. 2Screws(TP;M3x6)(intheIPSecBoard-B2contents)
x3
x2
F-9-356
F-9-357
9-173
9
5)InstalltheMainControllerPCB1tothehostmachine.
9-174
x2
Grip
F-9-358
6)InstalltheUSBCableandControlPanelCommunicationCable. 7)IfReaderisinstalled,installtheReaderPowerCable.
x2
Wire Saddles
9-174
9-175
ToinstalltheExpansionBus-F1,CordlessWirelessLANBoard-B1andIPSecBoard-B2inthesametime.
F-9-360
Caution:Pointstonoteat installation FortheBulkHeadUnit,be sure to install the flat surface oftheterminalassemblyfacing upward.
F-9-361
9-175
9
1)InstalltheBulkHeadUnitintheWirelessLANSupportPlate.
9-176
2)InstallthePCIBusExpansionPCB(intheExpansionBus-F1contents)inthePCIExpansionSupportPlate.
2Screws(TP;M3x6)(intheWirelessLANBoard-B1contents)).
2Screws(TP;M3x6)(inthe
ExpansionBus-F1contents)
x2
x2
[A]
PCI Expansion Support Plate Wireless LAN Support Plate Bulk Head Unit
F-9-362 F-9-363
4)RemovetheCoverPlatefromtheMainControllerRollerPCB1(TheremovedCoverPlatewillnot beusedanymore).
2Screws(theremovedscrewwillbeusedinstep7))
x2
F-9-364 F-9-365
9-176
9
3Screws(theremovedscrewswillbeusedinstep6)).
9-177
5)Removethe3screwsoftheMainControllerPCB1,andinstallthe3PCBSpacers(inthePCIBusExpansionKitContent).
x3
F-9-366
6)InstallthePCIExpansionSupportPlateassembledatstep3)intheMainControllerPCB1.
3Screws(usethescrewsremoved
instep5)). Caution: DonottucktheFanCablewhen installingthePCIExpansion SupportPlate.
x3
F-9-367
9-177
9-178
7)InstalltheWirelessLANSupportPlateassembledinstep1)intheMainControllerPCB1.
2Screws(usethescrewsremoved
instep4))
2Screws(TP;M3x6)(intheWireless
LANBoard-B1Contents) Caution: DonottucktheFanCable whentighteningthescrewof WirelessLANSupportPlate.
x4
F-9-368
8)InserttheterminalofBulkHeadUnitintotheindicatedposition.
F-9-369
9-178
9-179
10)TurntheIPSecSecurityPCB(intheIPSecBoard-B2contents)upsidedown,andinstalltheWirelessLAN AuxiliaryPlate(intheWirelessLANBoard-B1content)..
9)RemovetheplateoftheIPSecSecurityPCB.(Removedplateisnotusedanymore).
2Screws(Removedscrewswillbeusedinstep10)).
2Screws(usethescrews
removedinstep9)).
x2
x2
F-9-370
11)InstalltheIPSecSecurityPCBbyinsertingittotheconnectorofthePCIBusExpansionPCB.
2Screws(TP;M3x6)(inthe
IPSecBoard-B2contents)
x2
F-9-372
9-179
9
12)InstalltheMainControllerPCB1tothehostmachine.
9-180
x2
Grip
F-9-373
13)InstalltheUSBCableandControlPanelCommunicationCable. 14)IfReaderisinstalled,installtheReaderPowerCable.
x2
Wire Saddles
9-180
9
18) Affix the Antenna Tape in MFP Antenna, and affix it in the Reader.
9-181
19)Removethecoverofthe3CordGuide. [B]
60mm
F-9-376
F-9-375
20)Peeloffthepaperliner,andinstalltheCordGuide.
25mm
F-9-377 F-9-378
9-181
9
21)PasstheMFPAntennaCabletotheCordGuide,and installtheCordGuideCover.
9-182
22)OpentheRightRearCover1,inserttheconnectorofMFPAntennatotheterminaloftheMainControllerPCB1.
1WireSaddle
Connector
Wire saddle
F-9-380
F-9-381
F-9-382
9-182
9
Checkingafterinstallation
9-183
WhenIPSecSecurityBoardhasalreadybeeninstalled 1)InsertthePowerPlugintheoutlet. 2)TurnONthemainpowerswitch. 3) [Settings/Reristration] > [Preference] > [Network] > [Confirm Network Connection Set. Changes ] > turn it [ON]. 4)[Settings/Reristration]>[Preference]>[Network]>andselect[TCP/IPSettings]. 5)BesurethatIPSecSettingsisdisplayed.
9-183
Appendix
ServiceTools GeneralCircuitDiagram GeneralTimingChart UserMode BackupData
II
ServiceTools
SpecialTools
Inadditiontothestandardtoolsset,thefollowingspecialtoolsarerequiredwhenservicingthemachine: Toolname
Digitalmultimeter
ToolNo.
FY9-2002
Ctgr
A
Appearance
Remarks
Usedasaprobeextensionwhenmakingelectricalchecks.
DoorSwitch
TKN-0093
Testerextensionpin
FY9-3038
Testerextensionpin (L-shaped)
FY9-3039
Useforelectricalchecks.
CA-7testSheet
FY9-9323
Usedforadjusting/checkingimages.
II
III
Toolname
Loupe
ToolNo.
CK-0056
Ctgr
B
Appearance
Usedforcheckingimages.
Remarks
Cleaningtool
Tocleanthefeedguide-Thisisnotaservicetool.-1ofthisare enclosedatshipmentofthehostmachine.
Tospearl240
FY9-6007-000
ITBCleaningBladeLubricant.
Mirrorpositioningtool
FY9-3040-040
Usedforpositioningmirrormounts.
Reference:Category A:Mustbekeptbyeachserviceengineer. B: Must be kept by each group of about five engineers. C:Mustbekeptbyeachwarkshop
T-9-10
III
IV
SolventsandOils
Item
Alcohol
Uses
Cleaning;e.g., glass,plastic,rubber;externalcovers.
Composition
Remarks
Do not bring near fire. Procurelocally. Substitute: IPA(isopropyalcohol)
Solvent
Fluoride-familyhydrocarbon Alcohol Surfaceactivating Water Fluoride-familyhydrocarbon Chlorine-familyhydrocarbon Alcohol Mineraloil-familylithiumsoap Molybdenum disulfide Siliconeoil Specialoil Specialsolidlubricatingagent Lithiumsoap Siliconeoil Fluorinepolywthyl Polytetra fluorune ethylene
Do not bring near fire. Procurelocally. Substitute:MEK MO-138S ToolNo:CK-0427(500g/can) ToolNo:CK-0524(100cc) ToolNo:CK-0551(20g) Tool No: HY9-0007
IV
GeneralTimingChart
GeneralTimingChart
A4single-sided2printsfullcolor
Start key ON Printer unit Drum motor (Y) Drum motor (M) Drum motor (C) Drum motor (Bk) Pre-exposure LED(Y) Pre-exposure LED(M) Pre-exposure LED(C) Pre-exposure LED(Bk) Primary charging AC bias(Y) Primary charging AC bias(M) Primary charging AC bias(C) Primary charging AC bias(Bk) Primary charging DC bias(Y) Primary charging DC bias(M) Primary charging DC bias(C) Primary charging DC bias(Bk) Reference signal PVREQ signal Laser(Y) Laser(M) Laser(C) Laser(Bk) Developing AC bias(Y) Developing AC bias(M) Developing AC bias(C) Developing AC bias(Bk) Developing DC bias(Y) Developing DC bias(M) Developing DC bias(C) Developing DC bias(Bk) Developing motor(Y) Developing motor(M) Developing motor(C) Developing motor(Bk) Primary transfer bias(Y) Primary transfer bias(M) Primary transfer bias(C) Primary transfer bias(Bk) Secondary transfer bias Scanner motor(YM),(CBk) First & Second delivery motor First delivery sensor Cassette 1 pickup motor Cassette 1 pickup solenoid Cassette 1 pre-registration sensor Registration motor Registration sensor Fixing inlet sensor Fixing delivery motor Fixing motor Fixing heater Y1 M1 C1 Bk1 Y2 M2 C2 Bk2 PSTBY PINTR Imaging ready timing PRINT LSTR PSTBY
F-9-383
VI A4single-sided2printsBkcolor
Start key ON Imaging ready timing PINTR PRINT LSTR PSTBY
Printer unit Drum motor (Bk) Pre-exposure LED(Bk) Primary charging AC bias(Bk) Primary charging DC bias(Bk) Image formation system Reference signal PVREQ signal Laser(Bk) Developing AC bias(Bk) Developing DC bias(Bk) Developing motor(Bk) Primary transfer bias(Bk) Secondary transfer bias Scanner motor(Bk) First & Second delivery motor First delivery sensor Pickup/feed system Cassette 1 pickup motor Cassette 1 pickup solenoid Cassette 1 pre-registration sensor Registration motor Registration sensor Fixing inlet sensor Fixing delivery motor Fixing system Fixing motor Fixing heater
PSTBY
F-9-384
VI
VII
GeneralCircuitDiagram
GeneralCircuitDiagram(1/16)
10 9 8 7 6 5 4 H1
Fixing heater
J5013L
2 1
2 SW1
1 2 4 6
MT6
FT2
3 5
H4
Cassette heater
1 2 1 2
UN9
All-night power PCB
2
H2
Drum heater (Bk)
1
FT5
FT6
W
1
J5014L MT7
J5007F
1 1 2 2 3
N (W)
H (BK)
FT7 MT5
UL11023 AWG16 2
FT8
100V 15A
2 1
J5007M
FT11
FT9
SW2
Environment switch
1 3
TP
J681
1 2 3
Temperature fuse
J5039
1 2 3 4 5
TP1
J5012L
W W
1 2
3 4
FT10
FT14 J5005F
1 1 2 2 3 3 4 4 5 5 6 6
BK
FT13
MT1
SOLD5
J5012D
J5010F
1 1 1 2 3 4 2 2 3 3 4 4 5 5 6 6 7 7
J5010M
FT12
J5005M
H (BK)
N (W)
GND
N.C . N.C .
MT2
SOLD6
N (W) H (BK) H (BK)
1 2
E
N (W)
J866
1 2
J833
J5087F
1 2 2 3 3
J5087M J5006M
K
1
W W
2 2 3 3 4 4 5 5 6 6 7 7 8 8
J5006F
FT 35
FT 33
AC interlock switch
SW5
FT 36
FT 34
FT 32
N (W)
H (BK)
N.C .
N.C .
N.C .
N.C .
H (BK)
J1001
J1009
J1007
J1005
J1011
J1002
J1003
J1006
AC driver PCB
J1004
1 2 3 4 5 6 7 8 9
UN6
J2003
1 2 3 4 5 6 7 1
J2001
23CSR-8PK(N) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
J2002
1 2 3 4 5
J1010
1 2 3 4 5
J1008
1 2 3 4 5 6
N (W)
FT 31
J1012
1 2 3
TEST _RL_ON_24V_POWER
CRNT_S
VO L_S
DRM_RD_HEAT_OFF*
CST _HEAT_OFF
SH OFF UT
FS R_C RNT_S
VINJDG 2
VINJDG 1
RMT_SYS
3.3VR
3.3V
SEESA W
TEST_RL_3.3V_POW ER1
TEST_RL_3.3V_POW ER2
+3.3VR(TEST_GND)
HEAT2_ON
HEAT1_ON
GN D
GN D
GN D
GN D
GN D
RE LAY2_ON
RE LAY1_ON
ZE ROX_IN
GN D
12V
Option Cassette
Deck Heater
TEST_RL_3.3V_POWER2
TEST_RL_3.3V_POWER1
J431
23
22
21
20
19
18
17
16
15
14
13
12
11
10
J5002D
6
RMT_QUIC K
RMT_SYS
SEESA W
3.3VR
GN D
Relay PCB
J412
1 2 3 4 5 6 7 8 9
UN5
J5002DH
J426
J2012F
1 2 2 3 3
J411
1 2 3 4 5 6 7 8
GN D
GN D
GN D
GN D
GN D
GN D
GN D
RMT_24V
RMT_12V
GN D
24V
24V
24V
12V
12V
12V
B
1 2 3 1 2 3 4 5 6 7 8 9 10 7 6 5 4 3 2 1
MT3
J2012M
GND
N.C .
J1020
J1021
J2020
GND R R BL R BL BL BL BL BL OR OR OR BL BL Y Y
J5008F
J1022
7 6 5 4
UN7
GND
12V OR
BL
24V R
BL
24V R
BL
J5001F
1 2 3 4 5 6 7 8 9 10 11 12
J834 J1102
2 1 (J102)
J835
J5077F
UN10
UN11
J1101
1
J5077M
10
P.1
F-9-385
VII
J5014D
2 1 6 5 4 3 2 1 5 4 3 2 1 6 5 4 3 2 1
J5008M
1 2 3 4 5 6 7
VIII
GeneralCircuitDiagram(2/16)
10 9 8 7 6 5 4 3 2 1 F E
1 2
UN2
Pickup feed driver PCB
J211
1 2 3 4 5 6 7
UN1
DC controller PCB
J129
1 2 3 4 5 6 7
UN4
Controller
J301
2 3 4 5 6 7 8 9 10 11 1 2 3
UN16
HVT 1 PCB
J650
2 1 2 3
UN17
HVT 2 PCB
J651
1 2 3
UN18
HVT 2 PCB
J652
1 2 3
UN8
24V power supply PCB 1
J808
1
J302
1
J662
1 2 3 4 5 6
E
J5043M
1 2
J5043F
OR OR
UL1007 #20
OR
OR
OR
OR
OR
OR
PK
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
OR
BL
BL
BL
BL
BL
24V_IL
24V_IL
+12V_IL
+24V_IL
12V
GND
GND
24V
GND
24V_IL
24V_IL
24V_IL
24V_IL
+12V
+24V
BL
+24V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
24V
GND
GND
3.3R
12V
12V
12V
12V
12V
12V
BL
10
J423
J422
J421
J424
J425
J451
D FAX
UN5
Relay PCB
J413
1 2 3 4
J428
1 2 3 4 5 6 7
J427
1 2 3 4
J432
1 2 3 4 5 6 7
J700
P_CRG_FAN_LOCK
P_CRG_FAN_ON
C
PK PK BL BL
DCP_FAN_LOCK
DCP_FAN_ON
GND
GND
GND
GND
+3.3R
+3.3R
GND
GND
GND
GND
12V
GND
24V
24V
24V
12V
C
J5082DH J5082D
2 1 2 1
J5081F J5080M
1 1 2 2 1 1 2 2 3 3 4 4
J5080F
J5081M
J5082L
MT21 J701DH
1 2 3 4 5 6 1 2 1 2 1 2 1 2 3 1 2
J691
J803F
J804
J805
J801
J802
J6124D
3 2 1 3 2 1
J6122D J6122LH
1 2 3 1 2 3
J701D
To P.4
F-4
J6124LH J6124L
J701L
UN9
Finisher C1
Finisher A1
J6122L
2 1
B SP1
UI
USB
1 2 3 1 2 3
Speaker Option
FM4
FM3
10
P.2
F-9-386
VIII
GeneralCircuitDiagram(3/16)
10
15 1
10
J121
+3.3R GND R_PW_MONI* GND RMT_RESERVE RMT_SYS GND RMT_ENG RMT_RCON GND SEESAW RMT_CONT GND SHUTOFF GND
15
14 2 13
14
SOLD11
9
3 12 1 1 1 4
13
J401
GND
12
11 29
J110
2 5 2 2
HV_CHG_AC_PWM_C
6 3
11
10 28
3 3
HV_CHG_DC_PWM_C
7 4
10
9 27
4 4
HV_DEV_AC_RMT_C
8 5
8 26
5 5
SOLD12
HV_DEV_DC_PWM_C
9 6 7 25 6 6
HV_CHG_AC_PWM_M
10 7
6 24
7 7
HV_CHG_DC_PWM_M
11 8
5 23
8 8
HV_DEV_AC_RMT_M
12 9
4 22
9 9
HV_DEV_DC_PWM_M
13 10
3 21 10
SOLD13
HV_CHG_AC_PWM_Y
14 11 2 20
CN6
11
HV_CHG_DC_PWM_Y
15 12
1 19 12
J653
HV_DEV_AC_RMT_Y
13 18 13 17 14 14
HV_DEV_DC_PWM_Y GND
15
17 16 15
UN16
GND
16 16 15 16
+12V_IL_HV
17
HVT 1 PCB
Relay PCB
SOLD14
8
15 14 17
GND
27
J122
HV1_ANALOG2
18
DCP_FAN_24V
3
14 13 18
26
UN5
HV1_ANALOG1
19
J402
13
1 12 19
DCP_FAN_12V
4
25
GND
20
12
2 11 20
DCP_FAN_LOCK*
5
24
HVSEL_HV1_MUX2
21
11
3 10 21
PCRG_FAN_24V
6
23
HVSEL_HV1_MUX1
22
10
4 9 22
PCRG_FAN_12V
7
22
HVSEL_HV1_MUX0
23
5 8 23
PCRG_FAN_LOCK*
8
21
SOLD15
GND
24 8 6 7 24
GND
9
20
7 6 25 6 8 5 26 5 9 4 27 4 3 10 28
SHUKUTAI_MODE
25 26 27 28 10 11 12
19
18 17 16
SOLD16
3 2 11 29 2 1 1
CST_HEAT_OFF
29 14 15
15
GND VOL_S
16
14
13
CRNT_S
17
12
FSR_CRNT_S
18
11
7
13 12 11 10 9 8 1
120V_DET
19 20 21 22 23 24 25 26 27
10
9 8 7 6 5 4 3 2 1
J111
2 1
GND
6
7 6 5 4 3 2 1
15
J106
3 4 5 6 7 8 9
2 3 4 5 6 7
14 13 12 11 10 9
J231
UN3
UN1
J655
KYUSHI_EX_M2S
10 11 12 9 10
GND +5V
11
7 6
DC controller PCB
HVT 2 PCB
UN17
GND
14 13 12 11 10 9 8
GND
13 14 12
+3.3V
13
+3.3V
15 14 16 15 17 18 19
GND +24V
2 1
5
J656
20 21
HV2_ANALOG1
6 5 4 3 2 1
22
23 24 25 1 2 3 4 5 6 7 8 9 10 11
J107
GND HANSO_READY GND CPU_RESET GND HANSO2_EX_CLK HANSO2_EX_S2M HANSO2_EX_M2S GND HNASO1_EX_CLK HANSO1_EX_S2M
13 12 11 10 9 8 7 6 5 4 3
J201
UN2
4
4 3
12 13 14
2 1
Environment sensor 2
UN50
J810
15
GND
2 16
+3.3V
1 17
J5076LH J5076L
1 7 2 6
GND
18
J5076D
+5V
19 20 21
J5066LH
ITB_YORIM_CLK
4 4 5 23
RIKANM_CLK
24 3 1 6 2 2 1 2 7 1 3 2 1
11
DRUM_READY
25
10 9 8
J311
UN22
J1300
7 6
Environment sensor 1
J5066L
3 2 1 A
5 4
3.3V I2C_SDA GND I2C_SCL TEMP1 GND GND PEDE_READY PEDE_RESET* GND PEDE_CST2M_CLK GND PEDE_CST1M_CLK GND PEDE_EX_CLK GND PEDE_EX_S2M PEDE_EX_M2S +5V GND
2
J104
2 3 4 5 6 1 7 2 8 9 10 5 11 6 12 7 13 8 14 9 15 10 16 17 18 19
3 2 1 1
UN4
GND DRUM_HOB_CLK3 4
J313
J109
4 5 6 7 8 9 10
20 21
PEDE_DETECT
1
P.3
F-9-387
IX
IX
GeneralCircuitDiagram(4/16)
10 9 8 7 6 5 4 3 2 1 F
Buffer pass
MT24 J815
7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 13 12 11 10 9 8 7 6 5 4 3 2 1 11 10 9 8 7 6 5 4 3 2 1
Finisher C1
J809 J803M
F
Pickup feed driver PCB
J202
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 21
J809A J809B
To P.2
B-8
UN2
2.5K Paperdeck
J203
20 19
J809A_[0:7]
J809B_[0:8]
Finisher A1
J813H J813
J816 J816H
J5037LH
1 2 3 4 5 6 7 8 9 10
J5037L J5071L
1 23 2 22 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 12 13 11 14 10 15 9 16 8 17 7 18 6 19 5 20 4 21 3 22 2 23 1
J5037D
10
J5071D J5071DH
PRE_EXP_LED_M_PWM
PRE_EXP_LED_C_PWM
PRE_EXP_LED_K_PWM
PRE_EXP_LED_Y_PWM
EX_PAPER_FAN_PWM
DECK_CHOUHI_RXLOAD
DECK_CHOUHI_TXEND
DECK_CHOUHI_ENB
DECK_CHOUHI_RXD
DECK_CHOUHI_TXD
DECK_CHOUHI_CLK
BUF_CHOUHI_TXEND
BUF_CHOUHI_RXLOAD
WASTE_TNR_FG
HANSO_CNNT0
LS_SHUTM_CLK
SHUT_SL_PWM
HANSO_CNNT1
OHP_ANALOG
TNR_ANLG_M
BUF_CHOUHI_ENB
BUF_CHOUHI_RXD
TNR_ANLG_C
TNR_CTRL_M
BUF_CHOUHI_TXD
TNR_ANLG_K
TNR_ANLG_Y
BUF_CHOUHI_CLK
PATCH_CTRL
TNR_CTRL_C
TNR_CTRL_K
TNR_CTRL_Y
DOOR_OPEN
FUEXM_CLK
CST1M_CLK
CST2M_CLK
MULTI_SIZE
MULTIM_CLK
SHUTM_CLK
REGIM_CLK
DUPM_CLK
FIN_DL_MODE
FIN_DL_MODE
PCH_P
PCH_S
REG_R
REG_F
FIN_RESET
UART_RXD
UART_TXD
FIN_DL_EN
FIN_CNNT
UART_RXD
UART_TXD
GND
GND
GND
GND
Z3_DETECT
FIN_RESET
FIN_DL_EN
GND
GND
GND
GND
GND
GND
GND
GND
GND
3.3V
3.3V
+5V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
24V
12V
GND
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
10
11
12
13
14
15
16
17
18
19
20
21
10
11
12
13
14
15
16
17
18
19
10
11
12
13
14
15
16
17
18
19
20
21
22
23
J103
J125
J127
J126
DC controller PCB
J124
1 2 3 4 5 6 7 8 9 10 11
UN1
J138
1 2 3 4 5 6 7 8 9 10 11 12 13
J132
1 2
J102
1 2 3 4 5 6 7 8 9
J136
1 2
*FUSERM_BRAKE
FUSERM_DIR
KEY
TURNM_OUT_B
TURNM_OUT_B*
FUSERM_CLK
ECO_DOUT
ECO_SCK
FUSERM_LOCK
ECO_DIN
ECO_CS
EX12M_OUT_B
EX12M_OUT_B*
TURNM_OUT_A*
TURNM_OUT_A
FUSERM_GAIN
EX3M_OUT_B*
EX3M_OUT_B
FUSERM_ON
EX12M_OUT_A*
EX12M_OUT_A
EX3M_OUT_A
EX3M_OUT_A*
+12V_IL
J5053F
J5053M
SOLD8
J5031D
1 2
SOLD9
J822
J5045D
J5031DH
11 1 2 10 3 9 4 8 5 7 6 6 7 5 8 4 9 3 10 2 11 1 13 12 11 10 9 8 7 6 5 4 3 2 1
EHO-ID
J5031L
J2111M
J5045L J5045LH
10
11
12
13
+12V
ECO_POW
+24V_IL
+24V_IL
GND
GND
GND
GND
+5V
GND
N.C.
N.C.
N.C.
J2111F
B
2 1
SOLD4
SOLD3
SOLD2
SOLD1
J6084 J6142
11 10 9 8 7 6 5 4 3 2 1 4 4 3 3 2 2 1 1 4 4 3 3 2 2 1 1
J6141
4 4 3 3 2 2 1 1
J6140
DC interlock switch 1
SW3
DC interlock switch 2
SW4
11
10
Fixing motor
M21
M23
M24
M25
10
P.4
F-9-388
XI
GeneralCircuitDiagram(5/16)
10 9 8 7 6 5 4 3 2 1 F
DC controller PCB
F UN1
J118
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J114
J119
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
YM_EHOB_S2M-
YM_EHOB_M2S-
YM_EHOB_S2M+
YM_EHOB_M2S+
YM_EHOB_CLK+
YM_EHOB_CLK-
RESET*
J875_BUS[0:51] +5V_LS +3.3U_YukkyIO YM_GBD CK_EHOB_S2M+ CK_EHOB_M2S+ CK_EHOB_S2MCK_EHOB_M2SCK_EHOB_CLK+ CK_EHOB_CLKRESET* +1.5V GND CK_GBD +3.3V_YukkyIO GND +5V_LS K_BDK_BD+ +1.5V GND GND GND GND
YM_24V
M_BD-
M_BD+
GND
GND
GND
GND
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
CK_24V
M_LDC_N*
M_LDD_N*
M_LDA_N*
C_LDC_N*
M_LDB_N*
C_LDD_N*
C_LDA_N*
C_LDB_N*
M_LDC_P
M_LDD_P
M_LDA_P
C_LDC_P
M_LDB_P
C_LDD_P
C_LDA_P
C_LDB_P
K_LDC_N*
K_LDD_N*
K_LDA_N*
K_LDB_N*
K_LDC_P
Y_LDC_N*
Y_LDD_N*
K_LDA_P
Y_LDA_N*
Y_LDB_N*
Y_LDC_P
Y_LDD_P
Y_LDA_P
Y_LDB_P
K_LDD_P
K_LDB_P
10
11
12
13
14
15
16
17
18
19
20
21
N.C.
J825D
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 10 11 12 13 14 15 16 17 18 19 20 21 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J823D
J825L
10
11
12
13
14
15
16
17
18
19
10
11
12
13
14
15
16
17
18
19
20
J825LH
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J823L
J823LH
J854_BUS[0:21] J853_BUS[0:21]
21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J864_BUS[0:21]
C
3 2 1 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 3 2 1 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J863_BUS[0:21]
J830 (J203)
(J102)
J863
(J201)
UN12
UN13
Laser driver PCB (Y)
J852B
[17:1]
UN14
Laser driver PCB (Bk)
(J201)
(J101)
J854
J861 (J203)
(J101)
J862
(J102)
UN15
Laser driver PCB (C)
J853
J864 J860B
J851B
[17:1]
(J103)
J862B
(J202)
J851B_BUS[1:17]
J860B_BUS[1:17]
J852A
J860A
(J202)
[17:1]
[17:1]
J851A_BUS[1:17]
J860A_BUS[1:17]
(J103)
J851A
J867
10 9 8 7
( J204)
6 5 4 3 2 1 6
J868
5 4
( J205)
3 2 1
J871
10 9 8 7
( J204)
6 5 4 3 2 1 6
J872
5 4
( J205)
3 2 1
J862A
J852WH J6165
J860WH
J6159
1 1 2 2 3 3 4 4 5 5 1 1 2 2 3 3 4 4
J6160
5 5 1 1 2 2 3 3 4 4 5 5 6 6
J6161
J6166
J6167
1 1
2 2
3 3
4 4
5 5
1 1
2 2
3 3
4 4
5 5
1 1
2 2
3 3
4 4
5 5
6 6
M32
M31
M29
Image skew Image skew correction correction motor (Bk) motor (C)
M34
M33
M30
10
P.5
F-9-389
XI
XII
GeneralCircuitDiagram(6/16)
10 9 8 7 6 5 4 3 2 1 F E D C B
1
M1
M4
M3
M2
M8
M7
M6
M5
M
9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 9 8 8 7 7 6 6
M
5 5 4 4 3 3 2 2 1 1 9 8 8 7 7 6 6
M
5 5 4 4 3 3 2 2 1 1 9 8 8 7 7 6 6
M
5 5 4 4 3 3 2 2 1 1 6 5 5 4 4
M
3 3 2 2 1 1 6 5 5 4 4
M
3 3 2 2 1 1 6 5 5 4 4
M
3 3 2 2 1 1 6 5 5 4 4
M
3 3 2 2 1 1
J6010
J6009
J6014
J6016
J6011
J6012
J6013
J6015
DRM_MTR_PWM_Y
DRM_MTR_PWM_M
*DEV_MTR_ACC_M
*DEV_MTR_DEC_M
DRM_MTR_BRK_Y
DRM_MTR_PWM_C
*DEV_MTR_ACC_C
*DEV_MTR_DEC_C
DRM_MTR_PWM_K
*DEV_MTR_ACC_K
*DEV_MTR_ACC_Y
*DEV_MTR_DEC_K
*DEV_MTR_DEC_Y
DRM_MTR_DIR_Y
DRM_MTR_BRK_M
DRM_MTR_BRK_K
DRM_MTR_BRK_C
DRM_MTR_ON_Y
DRM_MTR_FG_Y
DRM_MTR_DIR_M
DRM_MTR_DIR_K
DRM_MTR_DIR_C
DRM_MTR_ON_M
DRM_MTR_ON_C
DRM_MTR_FG_M
DRM_MTR_ON_K
DRM_MTR_FG_K
DRM_MTR_FG_C
DEV_MTR_FG_M
DEV_MTR_FG_C
DEV_MTR_FG_K
DEV_MTR_FG_Y
19
+24V_IL
+24V_IL
+24V_IL
+24V_IL
+24V_IL
+24V_IL
+24V_IL
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10
11
12
13
14
15
16
17
18
+24V_IL
20 21
GND
GND
+5V
GND
GND
GND
GND
GND
GND
GND
GND
J307
J308
J305
UN4
J306
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
GND
GND
+5V
+5V
+5V
J303
11CSR-8PK(N) 1 2 3 4 5 6
(CSR) 7 8 9 10 11
TNR_CL_ON_Y
TNR_CL_ON_M
TNR_CL_ON_C
DRM_ENC_K2
DRM_ENC_K1
DRM_ENC_Y2
DRM_ENC_M2
DRM_ENC_M1
DRM_ENC_C2
DRM_ENC_C1
DRM_ENC_Y1
TNR_CL_ON_K
+24V
+24V
+24V
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
+3.3V
GND
GND
GND
GND
GND
GND
GND
GND
+24V
END26
END25
J6005D J6005DH
1
J6006D J6006DH
1
J6007D J6007DH
1
J6008D J6008DH
1
2 2
2 2
2 2
2 2
J6005L
J6006L
J6007L
J6008L
CL
CL
CL
CL
CL2
Toner supply clutch (M) Toner supply clutch (C) Toner supply clutch (Bk)
CL3
CL4
CL5
J6018
3 3 2 2 1 1
J6019
3 3 2 2 1 1
J6020
3 3 2 2 1 1
J6021
3 3 2 2 1 1
J6022
3 3 2 2 1 1
J6023
3 3 2 2 1 1
J6024
3 3 2 2 1 1
UN38
UN37
UN36
C drum rotation M drum rotation M drum rotation Y drum rotation Y drum rotation detection sensor 1 detection sensor 2 detection sensor 1 detection sensor 2 detection sensor 1
UN35
UN34
UN33
UN32
UN31
10
P.6
F-9-390
XII
XIII
GeneralCircuitDiagram(7/16)
10 9 8 7 6 5 4 3 2 1 F E D C
J5017
7 6 5 4 3 2 1 7 6 5 4 3 2 1
UN4
TNR_BTL_OPEN_HP_Y
TNR_BTL_OPEN_HP_M
TNR_BTL_OPEN_HP_C
TNR_BTL_OPEN_HP_K
TNR_BTL_OPEN_Y
TNR_BTL_OPEN_M
TNR_BTL_OPEN_C
TNR_BTL_OPEN_K
TNR_SNS_Y
TNR_COUNT_Y
TNR_SNS_M
TNR_SNS_C
TNR_SNS_K
TNR_COUNT_M
+5V_PIEZO_YM
+5V_PIEZO_YM
+5V_PIEZO_CK
TNR_COUNT_C
+5V_PIEZO_CK
TNR_COUNT_K
+5V
+5V
+5V
GND
GND
GND
+5V
J5015D
J5018D
7 6 5 4 3 2 1 7 6 5 4 3 2 1
GND
J5021D
7 6 5 4 3 2 1
J5024D
J5015LH J5015L
J5018LH J5018L
J5021LH J5021L
J5024LH J5024L
J5016DH J5019DH
7 6 5 4 3 2 1
J5022DH J5022D
J5025DH
7 6 5 4 3 2 1
J5016D J5016L
J5019D J5019L
1
J5025D J5025L
J5022L
C
J5020
7 6 5 4 3 2 1
J5023
7 6 5 4 3 2 1
J5035
UN39
UN40
UN41
UN42
B
J6033
1 2 3
B
J6034
1 3 2 2 3 1
J6035
1 3 2 2 3 1
J6154
1 3 2 2 3 1
J6036
1 2 3
J6037
1 3 2 2 3 1
J6038
1 3 2 2 3 1
J6151
1 3 2 2 3 1
J6039
1 2 3
J6040
1 3 2 2 3 1
J6041
1 3 2 2 3 1
J6152
1 3 2 2 3 1
J6042
1 2 3
J6043
1 3 2 2 3 1
J6044
1 3 2 2 3 1
J6153
1 3 2 2 3 1
TS1
PS1
PS9
PS5
TS2
PS2
PS10
PS6
TS3
PS3
PS11
PS7
TS4
PS4
PS12
PS8
10
P.7
F-9-391
XIII
XIV
GeneralCircuitDiagram(8/16)
10 9 8 7 6 5 4 3 2 1 F
Drum driver PCB
J304
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
F UN4
J312
1 2 3 4 5 6 7 8 9
J309
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
*ITB_MTR_BRK
ITB_MTR_LOCK
ITB_MTR_CLK
N.C.
TNR_FRONT_DOOR
ITB_MTR_ON
ITB_MTR_GAIN
ITB_MTR_FG
TNR_DOOR_K
TNR_DOOR_C
TNR_DOOR_M
TNR_DOOR_Y
YORI B
+24V_IL
YORI*B
1tr B
YORI A
YORI*A
1tr*B
+5V
+5V
+5V
+5V
GND
GND
GND
GND
1tr*A
BTL_MTR_ROT_M_CW
BTL_MTR_ROT_C_CW
BTL_MTR_ROT_K_CW
BTL_MTR_ROT_Y_CW
E
J5078D
19 1 2 18 3 17 4 16 5 15 6 14 7 13 8 12 9 11 10 10 11 9 12 8 13 7 14 6 15 5 16 4 17 3 18 2 19 1
BTL_MTR_OPEN_M_CCW
BTL_MTR_OPEN_C_CCW
BTL_MTR_OPEN_K_CCW
BTL_MTR_OPEN_Y_CCW
GND
GND
1tr A
+5V
E
J5079D
17 1
16 2
15 3
14 4
13 5
12 6
11 7
10 8
9 9
8 10
7 11
6 12
5 13
4 14
3 15
2 16
1 17
J5079LH J5079L
J5078LH J5078L
15
14
13
12
11
10
J5029D
J5027D
17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J5029LH J5027LH
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
J5029L
10
11
12
13
14
15
16
17
J5027L
J5070D J5070DH
J1184D J1184DH
17
16
15
14
13
12
11
10
13
12
11
10
10
11
12
13
14
15
16
17
J5070L
J1184L
J1181L
10
11
12
13
C
J5 J3
2 2 1 1 2 1
J1180D J1180DH
M10
M12
J6004DH
8 7 6 5 4 3 2 1
J1180L
J6025
4 1
3 2
2 3
1 4
4 2
3 3
2 4
J6004D J6004L J2
2 1 1
B
J4 J6046
2 2 1 1 3 3 2 2 1 1 3 3 2 2 1 1 3 3 2 2 1 1 3 3 2 2 1 1 3 3 2 2 1 1
M
1 2 3 4
J6048
J6050
J6052
J6053
4 2
ITB motor
M13
M14
M15
M9
M11
PS17
PS16
Toner container Toner container Toner container inner cover inner cover inner cover sensor (C) sensor (M) sensor (Y)
PS15
PS14
PS13
10
P.8
F-9-392
XIV
XV
GeneralCircuitDiagram(9/16)
10 9 8 7 6 5 4 3 2 1 F UN2 E D C
J5097D
4 1 3 2 2 3 1 4
J217
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
J210
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
EX_TRAY2_FULL
KYUSHI_V_PASS_SNS
MULTI_AFTER_SNS
REG_SHUT_SL_PWM
REGIMAE_SNS
F_DOOR_SNS
DUP_ENT_SNS
TURN_SNS
FLAP1_SL
FLAP2_SL
FLAP3_SL
EX2_SNS
EX3_SNS
+5V
+5V
+5V
+5V
+24V
+24V
+24V
GND
GND
GND
OHP_LED_ON
+24V_IL
GND
GND
GND
GND
OHP_ANALOG
GND
GND
+5V
+5V
+5V
+5V
GND
+5V
J5032D J5055D
17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J5032DH
10
11
12
13
14
15
16
17
J5055LH J5055L
10
11
12
13
14
15
16
17
18
19
20
21
J5032L
C
8 1 7 2 6 3 5 4 4 5 3 6 2 7 1 8
J5106D
J5106L J5106LH
J5056DH J5056D
2 1
4 2
3 3
2 4
J5058D
J5056L
J5058L
J5083D J5038DH
5 1 2 4 3 3 4 2 5 1
J5108LH J5108L
J5083L J6065D
J6073D
J6074D
B
J6064D J6064DH J6064L
1 3 2 2 3 1
2 1 2
J6065DH J6065L
1
2 2
J6073DH J6073L
1
2 2
J6092 J6093
3 2 1 3 2 1
J6090
3 2 1 3 2 1
J6089
J6094
J6095
J6096
SL
1 2
SL
SL
SL
SL1
Transparency sensor
UN51
UN53
Registration sensor
PS33
PS18
PS45
Reverse sensor
PS39
PS42
SL5
SL6
SL7
PS43
PS40
10
P.9
F-9-393
XV
XVI
GeneralCircuitDiagram(10/16)
10 9 8 7 6 5 4 3 2 1 F
J204
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
F
J212
UN2
MULTI_LAST_SNS
MULTI_PAPER_SNS
FEED_DOOR_SNS
MULTI_SIZE_ANALOG
DUP_SNS
EX_PAPER_FAN2_LOCK
EX_PAPER_FAN2_ON
2_3EX_DOOR_SNS
EX_TRAY1_FULL
EX1_SNS
DC controller PCB
J123
1 2 3 4 5 6 7 8 9
FUSER_ENT_SNS
LOOP1_SNS
LOOP2_SNS
+5V
+5V
GND
GND
GND
+5V
FUEXM_A*
FUEXM_B*
FUEXM_A
FUEXM_B
YOBI
YOBI
YOBI
+5V
+5V
GND
GND
GND
GND
+5V
UN1
+3.3V
+5V
+5V
+5V
GND
GND
GND
GND
GND
+5V
J5003D
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J5003L
J5028L
J6062D
J6070 J5110D
3 2 1
J6088
J6091 J5109D
3 2 1 4 3 2 1
C
J5099D J5099DH
9 8 7 6 5 4 3 2 1
J6062DH
1 1 2 3 2 3 4
J5110LH J5110L
J5109LH J5109L
J6062L
J5054DH
J5068D J5068DH
J5068L
1 2 3
PS41
PS44
Delivery fan 2
J6080D
3 2 2 3 1
FM9
J6099
4
3 3
2 2 1
J6058
J6080L J6080LH
PS21
M22
J5100
3 2 1 3 2 1
J6171
3 2 1
J6081
3 2 1
J6077
3 2 1
J6085
3 2 1
J6086
3 2 1
J6087
PS19
Right lower door sensor
PS47
Multi-purpose paper sensor
UN52
PS38
Duplex paper sensor
PS35
Fixing arch sensor 1
PS36
Fixing arch sensor 2
PS34
10
P.10
F-9-394
XVI
XVII
GeneralCircuitDiagram(11/16)
10 9 8 7 6 5 4 3 2 1 F
15 16 17 18 19 20 21
F
1
UN2
DC controller PCB
J112
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UN1
FUSER_KAIJYO_SNS
FM_SHUT_POS_SNS
FM_SHUT_HP_SNS
INNER_EX_SNS
HV_TR2_REV_PWM
SUB_THRM1
SUB_THRM2
SUB_THRM3
HV_TR2_CV_PWM
THRM_CNNT
MAIN_THRM
+12V_IL_HV
SEESAW
HV3_DC_CS
HV3_DC_VS
+3.3R
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
3.3V
+5V
+5V
+5V
+5V
J657
E
J5026D J5026DH J5026L
13 1 2 12 3 11 4 10 5 9 6 8 7 7 8 6 9 5 10 4 11 3 12 2 13 1
HVT3 PCB
UN18
D
1
J5036D
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
J5036LH
J5036L
J5075D
23 22 2 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 12 13 11 14 10 15 9 16 8 17 7 18 6 19 5 20 4 21 3 22 2 23 1
J5075L J5075LH
J5061DH
J5061L
J5012DA_[0:12]
J5012DB_[0:12]
J5061D
12 1 2
10
11
12
10
11
B
6 5 4 3 2 1 1 2 3 4 5 6
12
11
J5012LA_[0:12]
10
12
11
10
J5012DA
J5012LA
J5012LB_[0:12]
J5012DB J5012DWH
1 3 2 4 6
J5012LB J5012LWH
C
FT3
5
FT4
SW1
J5060D J5060DH
10 9 8 7 6 5 4 3 2 1
J42D J42DH
J5060L
1 2 3 4 5 6 7 8 9 10
J42L
J6101
3 2 1 3 2 1
J6104
3 2 1
J6102
3 2 1
J6103
1 1 2 1 2 1 2 1 2
PS37
PS30
PS32
Shutter HP sensor
PS31
Main thermistor
TH1
10
P.11
F-9-395
XVII
XVIII
GeneralCircuitDiagram(12/16)
10 9 M28
M
8 FM10
PS29
J6123L J6123LH
3 2 1
CL1
SL4
Registration motor
M
1 6 2 5 3 4 4 3 5 2 6 1
M19
M20
FM1
FM2
M16
M17
1 2 3
1 2 3
1 4
2 3
3 2
4 1
J6157
1 2 2 1
J6158
J6123D
J6097
3
3
2
2
J6082
J6083
PS20
3 2 1
J6155
J6156
J6066L J6066DH
J6067L J6067DH
J6056L
1 4
2 3
3 2
4 1
J6057L
3 2 1
J6056DH J6056D
J6057DH J6057D
J6066D
J6067D
J5004
J5049L
1 2 3 4 5 6 7 8 9 10 11
J5049LH J5086LH
1 2 7 3 6 4 5 5 4 6 3 7 2 8 1
J5049D
11
10
J5086L J5086D
FUSER_EX_A_FAN_LOCK
FUSER_EX_B_FAN_LOCK
FUSER_EX_A_FAN_ON
LS_SHUTM_HP_SNS1
PCRG_FAN_F_LOCK
MULTI_AUTO_SL
MULTIM_OUT_A*
MULTIM_OUT_B*
MULTIM_OUT_A
MULTIM_OUT_B
MULTI_CL_ON
FUSER_EX_B_FA N _O N
PCRG_FAN_F_ON
LS_SHUTM_A*
LS_SHUTM_B*
LS_SHUTM_A
LS_SHUTM_B
R_DOOR_SNS
CST1M_A*
CST1M_B*
CST2M_A*
REGIM_A*
REGIM_B*
DUPM_A*
+24V_IL
+24V_IL
DUPM_B*
REGIM_A
REGIM_B
DUPM_A
DUPM_B
GND
GND
+5V
GND
+5V
CST2M_B*
CST1M_A
CST1M_B
CST2M_A
CST2M_B
GND
GND
10
11
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
J214
J213
J215
UN2
J207
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
J218
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
REGI_R_LEDON
REGI_F_LEDON
REGI_R_GAIN1
REGI_R_GAIN0
REGI_F_GAIN1
REGI_F_GAIN0
PATCH_LEDON
FM_SHUTM_A*
PATCH_CTRL
FM_SHUTM_B*
REG_R_S
REG_F_S
EX_PAPER_FAN1_PWM
FM_SHUTM_B
2ND_TR_EX_FAN_ON
AD_P
AD_S
+5V
+5V
+5V
FM_SHUTM_A
GND
GND
GND
GND
COOL_F_FAN_LOCK
COOL_R_FAN_LOCK
2N D _TR_EX_FA N _LO C K
COOL_R_FAN_ON
COOL_F_FAN_ON
24V
GND
GND
GND
J5048D
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
10
11
12
13
14
15
16
17
18
19
J5048L J5048LH
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J5034D
10
11
12
13
14
15
J5034LH J5034L
B
1
J5046D J5046DH
19
18
17
16
15
14
13
12
11
10
10
11
12
13
14
15
16
17
18
19
J5046L
J6059D J6059DH
1
J6061D J6061DH
1
J6068D J6068DH
1
J6069D J6069DH
1
J6071D J6071DH
4 1
3 2
2 3
1 4
2 2
3 2
2 3
3 2
2 3
3 2
2 3
J6059L
J6061L
J6068L
J6069L
J6071L
1 2 3
1 2 3
1 2 3
M
6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1
J6106
J6107
J6108
Shutter motor
M27
Delivery fan 1
FM7
UN47
UN48
UN49
FM5
FM6
FM8
10
P.12
F-9-396
XVIII
XIX
GeneralCircuitDiagram(13/16)
10 9 8 7 6 5 4 3 2 1 F UN59 E D C B A
PIN1
SIN-21T-1.8S
F
J205
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MT18
GND
UN2
J5096L J905
TNR_SNS_CNT_K +24V_IL TNR_DET_K
3 4
J5096D
1 4 5 2 4 3
MT25
WASTE_TNR_DET_SNS
WASTE_BOX_SET_SNS
GND
2
TS8
SOLD18
UN46
PRE_EXP_LED_K
WASTE_TNR_LED_ON
WASTE_TNRM_FG
PRE_EXP_LED_M
PRE_EXP_LED_C
PRE_EXP_LED_Y
TNR_CTRL_Y
PCRG_NEW_DET_Y
WASTE_TNRM_ON
TNR_CTRL_M
TNR_CTRL_C
TNR_CTRL_K
TNR_ANLG_Y
PCRG_NEW_BK
PCRG_NEW_M
TNR_ANLG_M
TNR_ANLG_C
TNR_ANLG_K
24V_IL
PCRG_NEW_C
24V_IL
5V
GND
GND
GND
GND
GND
+12V
GND
GND
1
J5096LH
MT29
Developing assembly(Bk)
3 2 1
J5095L J904
5 2
MT26
J5095D
1 4 5
TNR_SNS_CNT_C +24V_IL
TS7
UN45
SOLD19
J5050D
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 16 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
UN19
UN58
4 3
4 3
J601D
GND 24V_IL TNR_DET_BK TNR_SNS_CNT_BK PCRG_NEW_BK TNR_DET_C TNR_SNS_CNT_C PCRG_NEW_C TNR_DET_M TNR_SNS_CNT_M PCRG_NEW_M TNR_DET_Y TNR_SNS_CNT_Y PCRG_NEW_Y 24V_IL GND
17 16 3 2
J901
J5095LH
J5050L J5050LH
14 13 12 11 10 9 8
J5094L J903
TNR_SNS_CNT_M
5
2 1
2 1
15 14 5 13 12 11 10 9 6 7 8 9 10
J5094D
5 1 4
+24V_IL
4
TNR_DET_M
3
11
J5051D J5051DH
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
7 6 5 4
GND
1
GND
2
TS6
SOLD20
UN44
UN57
J5094LH
MT31
Developing assembly(M)
12
13
4 3
8 7 6 5
15
J601LH
GND
GND
16
2 1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
J5051L
J902
TNR_SNS_CNT_Y
5
J5093D
1 5
J5093L
14
J601L
17
J900
TNR_DET_Y
3 2
+24V_IL
4
TS5
SOLD21
UN43
4 3 2 1
UN56
4 3 2
J5093LH
15 14 13 12 11 10 16 15 14 13 12 10 11 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1
MT32
1 1
Developing assembly
J755DB_[0:15] J755DA_[0:16]
J755DB J755D
J755DA
3 2 1
J606
CNNT
1 3 2 1 3 2
J6121
UN29
PEXP_LEDON_K
J755LB J755L
J755LA J604
J755LA_[0:16] CNNT
3
C
J755LB_[0:15]
J6119
UN27
PEXP_LEDON_C
10
11
12
13
14
15
2 1
J600
GND PEXP_LEDON_Y PEXP_LEDON_M PEXP_LEDON_C PEXP_LEDON_BK +12V GND
1
J603
CNNT
3
PEXP_LEDON_M
UN20
J6117
UN25
J6147
UN24
2 1
CNNT
B
WTNR_DET_LEDON WTNR_BOX_DET WTNR_DET P5V GND WTNR_MTR_ON WTNR_MTR_FG WTNR_MTR_GND
PEXP_LEDON_Y
3 1 3 2
J601
3
J6115
UN23
J6148
1
UN26
2 1
J602
4 3 2 1 4 3
UN28
J6150
2
UN30
J6110
5 4 3 2 1 1
3 2
2 3
J605
UN21
M26
10
(CZ)
2 1
P.13
F-9-397
XIX
XX
GeneralCircuitDiagram(14/16)
10 9 8
Cassette 1 size switch (B)
7
Cassette 1 size switch (A)
6
Cassette 2 size switch (A)
SW7
SW6
SW9
SW8
J6125
J6126
J6127
J6128
J5074L J5074LH
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
J5073L J5073LH
J5074D
11
10
11
10
J5073D
CST1_SIZE_7
CST1_SIZE_6
CST1_SIZE_5
CST1_SIZE_4
CST1_SIZE_3
CST1_SIZE_2
CST1_SIZE_1
CST1_SIZE_0
CST2_SIZE_7
CST2_SIZE_6
CST2_SIZE_5
CST2_SIZE_4
CST2_SIZE_3
CST2_SIZE_2
CST2_SIZE_1
CST2_SIZE_0
GND
GND
GND
10
11
12
13
14
15
16
17
GND
18
19
20
J234
GND
21
UN3
J235
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
J237
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
D
1TR_OFF_POSI_SNS ITB_YORI_SNS1 ITB_YORI_SNS2 ITB_YORI_SNS3 ITB_YORI_SNS4 1TR_ON_POSI_SNS ITB_HP_SNS +5V +5V +5V +5V +5V +5V +5V GND GND GND GND GND GND GND +5V GND
CST1_RETRY_SNS
CST1_LEVEL_B_SNS
CST1_LEVEL_A_SNS
CST2_LEVEL_A_SNS
CST2_LEVEL_B_SNS
CST1_PAPER_SNS
CST2_PAPER_SNS
CST2_RETRY_SNS
CST1_PICKUP_SL
CST2_PICKUP_SL
ITB_STR_HP_SNS
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+24V
+24V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
J5011LH
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
C
J5052D J5052DH J5052L
1
J5040L
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
J5064D
14 13 12 11 10 9 8 7 6 5 4 3 2 1 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J5064LH
10
11
12
13
14
10
11
12
13
14
J5065LH
1 2 3 4 5 6 7 8 9 10 11 12
J5064L
J5065L
J5062L
B
J6030 J6031
3 2 1 3 2 1
J6026
3 2 1 3 2 1
J6027
3 2 1
J6028
3 2 1
J6029
3 2 1
J6032
J6129
3 2 1 3 2
J6130
1 3 2
J6131
1 3 2 1
J6132
2 1 2 2 1
J6134
J6135
J6136
J6137
2 1 2 2 1
J6138D J6138DH
J6138L
PS24
SL
PS25
PS26
PS27
PS28
SL
PS49
PS51
PS52
PS55
SL2
PS50
PS53
Cassette 2 Cassette 2 Cassette 2 paper level pre-registration pickup solenoid sensor B sensor
PS54
PS56
SL3
PS22
PS23
10
P.14
F-9-398
XX
XXI
GeneralCircuitDiagram(15/16)
10 9 8 7 6 5 4 3 2 1 F E
J3001
8 9 10 1 2 3 4 5 6 7 8 9 10 11 12 13
TEN_KEY
TTP
E
J8302
1 2 3 4 5
(J3002)
6 7
D
10 9 8 7 6 5 4 3 2 1 12 11 10 9 8 7 6 5 4 3 2 1
D
J8308
( J1008)
J8309
( J1009)
1 6 7 2
J8006
(J1006)
J8202
(J2002)
5 4 4
19
HUB
18
17
10
CPU
(J1007)
(J1003)
LCD
12
13
14
15
16
1 8
2 17 16 15 14 13 12 11 10 9 8 7 6 5 7
3 18 6
11
J8003
J1
J8007
19 4 3 2 1
J4001
C
SUBKEY UNIT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
J9001
7
J4002
5 2
J811
(J5001)
B
Relay Board
J8002
(J1002)
CN1M
Inverter PCB
VOLUME_KEY
3 3 2 1
1 2 3
10
P.15
F-9-399
XXI
XXII
GeneralCircuitDiagram(16/16)
10 9
G4FAX board-G1
UI Invertor LCD
(Option C) (CMJ only) Coinvender
CCM10/3S
or
W-LAN (Option A)
or
RSConv
FM13
or
E
J5013
USB(H)
USB(D)
Ethernet
E
J2043 J5004 J5000
J5010 USB-FLASH
J2014
J5006 CC-VI
J5003
J2041
J2045
PCI-ex I/F
ISOLDE-A(IA-L)
J5001
J2031 J2032 J5019 J5012
HDD 0 (standerd)
J105
SATA
J108
J107
SATA
J103
J109
FM12
FM11
DDR2 DIMM0
POSTPONE I/F
TPM
(dealer only)
IRIGOLETTO-A
J111
FM14
J6173D
1 3 2 2
J102
DC controller PCB
UN1
J6172
J110
J104
J6174DH
J14
CARMEN-A(CL4)
J1xxx J16 J17
12V
J1000
J18
J11
J13
J12
J3003
J1010
or
C
Debug SRAM
(debug only)
3.3R
MINERVA (MDS)
FRAM Counter
DDR2 DIMM
DDR2 DIMM
Connection Exsample
12V
Cable
Cardedge
Board to Board
or
12V
10
P.16
F-9-400
XXII
1 2 1 2
2 1
XXIII
ListofUserMode
EnvironmentSettings
PaperSettings
*DefaultSettings Item
PaperSettings A5R/STMTROriginalSelection B5/EXECOriginalSelection PaperTypeManagementSettings
SettingDescription
Plain*,Recycled,Color,Pre-punched A5R,STMTR* B5,EXEC* Details/Edit Name,Category,BasisWeight,Type,Finish,Creep (Displacement)CorrectionAdjustment,Color Duplicate,Delete ENV.1:COM10*,ISO-B5,Monarch,ISO-C5,DL ENV.2:COM10*,ISO-B5,Monarch,ISO-C5,DL On,Off* Register/Edit,Delete,RegisterName
DeviceInformation DeliveryAvailable
No No No Yes No Yes No Yes
T-9-12
DisplaySettings
*DefaultSettings Item
ScreenatStartup
SettingDescription
MainMenu*,QuickMenu,Copy,ScanandSend,Send&Fax, Fax,ScanandStore,AccessStoredFiles,Fax/IfaxInbox, Secured Print, Web Browser, Workflow Composer, Remote Scanner,PrintServer,MobilePrint,ScanLockAnalyzer, IntroductiontoUsefulFeatures OpenStatusMonitor/Cancel:On,Off* DefaultStatusType:Copy/Print*,Send,Receive, Store,Consumables Status/Log:JobStatus*,Log Details:PrintJobs,SendJobs,ReceiveJobs,Copy,Fax, Forward,LocalPrint,Printer,RXPrint,PrintReport RegularCopy*,ExpressCopy On*,Off EnableFaxinScanandSendFunction:On*,Off MailBox:On*,Off AdvancedBox/Network:On*,Off MemoryMedia:On,Off* On,Off*
DeviceInformation DeliveryAvailable
No
No No No No No No No No No No No
DefaultScreen(StatusMonitor/Cancel)
Language/KeyboardSwitchOn/Off
XXIII
XXIV
Item
Language/KeyboardSwitch DisplayRemainingPaperMessage No.ofCopies/JobDurationStatus DisplayOriginalScanningCleaningArea*1 SelectPaperScreenPriority mm/InchEntrySwitch ID/UserNameDisplayOn/Off DisplayRemainingTonerErrorMessage ClearRemainingTonerError
SettingDescription
Language,KeyboardLayout On*,Off On*,Off On*,Off Simple*,Detailed mm,inch* On*,Off On,Off* Delete
DeviceInformation DeliveryAvailable
No No No No No Yes No No No
T-9-13
Timer/EnergySettings
*DefaultSettings Item
AdjustTime Date/TimeSettings
SettingDescription
00:00to23:59,inoneminuteincrements(00:00*) DateandTimeSetting(12digitnumber) TimeZone:GMT-12:00toGMT+12:00(GMT-05:00*) DaylightSavingTime:On,Off* 24Hour,12Hour* 0(Off)to9minutes,inoneminuteincrements(2minutes*) InitialFunction*,SelectedFunction 5*,10,15,20,30,40,50min.,1hour,90min., 2,3,4hours Low*,High SundaytoSaturday,00:00to23:59,inoneminuteincrements 00:00to23:59,inoneminuteincrements
DeviceInformation DeliveryAvailable
No No No No No Yes Yes Yes Yes Yes Yes
T-9-14
Network
If you are configuring the settings for the first time in "Interface Settings," "TCP/IPv4 Settings," "TCP/IPv6 Settings," or "Settings Common to TCP/IPv4 and TCP/IPv6," use the control panel of the machine. After configuring the TCP/IP settings, you can change them using the Remote UI. IntheNetWareorAppleTalknetwork,theTCP/IPprotocolmustbeusedtospecifythesettingswithsoftwareotherthanthecontrolpanelofthemachine.Thesettingitemsareshownbelow.
SomeitemscanbesetusingtheRemoteUI.UsethecontrolpanelofthedevicetosetitemswhichcannotbesetusingtheRemoteUI.
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
UserDataList Confirm Network Connection Set. Changes TCP/IPSettings PlintList On,Off*
SettingDescription
CanbesetinRemote UI
Yes No
XXIV
XXV
Item
IPv4Settings UseIPv4 IPAddressSettings
SettingDescription
On*,Off IPAddress:0.0.0.0* SubnetMask:0.0.0.0* GatewayAddress:0.0.0.0* DHCP:On,Off* RARP:On,Off* BOOTP:On,Off* IPAdress:0.0.0.0* On,Off* UseStatelessAddress:On*,Off UseManualAddress:On,Off* ManualAddress:IPv6Address(39charactersmaximum) Prefix Length:0 to 128(64*) DefaultRouterAddress(39charactersmaximum) On,Off* IPv6Address:(39charactersmaximum) 48charactersmaximum
CanbesetinRemote UI
Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes
UseDHCPv6 PINGCommand HostName DNSSettings DNSServerAddressSettings IPv4 IPv6 DNSHost/DomainNameSettings IPv4 IPv6 DNSDynamicUpdateSettings IPv4 IPv6
PrimaryDNSServer:IPAddress:0.0.0.0* SecondaryDNSServer:IPAddress:0.0.0.0* PrimaryDNSServer:IPv6Address SecondaryDNSServer:IPv6Address HostName:47charactersmaximum DomainName:47charactersmaximum UseSameHostName/DomainNameasIPv4:On,Off* HostName:47charactersmaximum DNSDynamicUpdate:On,Off* DNSDynamicUpdate:On,Off* RegisterStatelessAddress:On,Off* RegisterManualAddress:On,Off* RegisterStatelessAddress:On,Off: On,Off* IPAddress:0.0.0.0* AutoSet,displayonly 63charactersmaximum On*,Off On,Off*
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes
XXV
XXVI
Item
RAWPrintSettings RAWPrintSettings BidirectionalCommunication SNTPSettings UseSNTP PollingInterval NTPServerAddress CheckNTPServer FTPPrintSettings UseFTPPrint User Password WSDPrintSettings UseWSDPrint UseWSDBrowsing UseMulticastDiscovery UseFTPPASVMode UseFTPPASVMode IPPPrintSettings IPPPrintSettings UseSSL UseAuthentication User Password MulticastDiscoverySettings Response Scopename UseHTTP UseWebDAVServer SSLSettings Key and Certificate SetastheDefaultKey Certificate Details On*,Off On,Off*
SettingDescription
CanbesetinRemote UI
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
On,Off* Intervalforperformingtimesynchronization(1to48 hours)(24hours*) IPaddressorhostname On,Off* UsernameforFTPserverlogin(24charactersmaximum) PasswordforFTPserverlogin(24charactersmaximum) On*,Off On*,Off On*,Off On,Off* On*Off On,Off* On,Off* UsernameforFTPserverlogin(24charactersmaximum) PasswordforFTPserverlogin(24charactersmaximum) On*Off Scopenametobeusedforamulticastdiscovery (32charactersmaximum) On*Off On,Off* FunctionsusingSSLencryptedcommunications Version/SerialNumber/SignatureAlgorithm/IssueDestination/ StartDateofValidity/EndDateofValidity/Issuer/PublicKey/ Cert Thumbprint/Certificate Displayswhatthekeypairisbeingusedfor On,Off* IPaddressorFQDN(128charactersmaximum) 1to65535(80*) On,Off* On,Off*
XXVI
XXVII
Item
User Password Confirm Dept. ID PIN IPSecSettings UseIPSec ReceiveNon-policyPackets Edit Delete PolicyOn,Off Register PolicyName Register:SelectorSettings
SettingDescription
24charactersmaximum 24charactersmaximum On*,Off On,Off* Allow/Reject
CanbesetinRemote UI
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
IKESettings
IPSecNetworkSettings
24charactersmaximum LocalAddress: AllIPAddresses*/IPv4Address/IPv6Address/IPv4Manual Settings/IPv6ManualSettings RemortAddress: AllIPAddresses*,AllIPv4Address,AllIPv6Address,IPv4Manual Settings,IPv6ManualSettings Port:SpecifybyPortNumber*/SpecifybyServiceName IKEmode:Main*/Aggressive AuthenticationMethod:Pre-SharedKeyMethod*/Digitalsig. Method Auth./EncryptionAlgorithm:Auto*/ManualSettings Validity:Time(1to65535minuites)(480minuites*) Validity:Size(1to65535MB)(65535MB*) PFS:On,Off* Auth./EncryptionAlgorithm:Auto*/ManualSettings Connect.Mode:Transport,displayonly On,Off* AutoDetect*/EthernetII/Ethernet802.2/Ethernet802.3/ EthernetSNAP AutoSet,displayonly AutoSet,displayonly BinderyPServer,RPrinter,NDSPserver*,Nprinter AutoSet,displayonly 47charactersmaximum 47charactersmaximum 20charactersmaximum 0to15(0*) 1to15seconds(5sedonds*) 0to255(0*) 1to20KB(20KB*)
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
NetWareSettings UseNetWare FrameType IPXExternalNetworkNumber NodeNumber PrintService PacketSignature BinderyPserverSettings PrintServerName FileServerName PrintServerPassword PrinterNumber PollingInterval PrinterForm BufferSize
XXVII
XXVIII
Item
ServiceMode
SettingDescription
Serviceonlycurrentlymountedform/Changeformsasneeded/ Minimizeformchangesacrossprintqueues/Minimizeform changeswithinprintqueues* 47charactersmaximum 47charactersmaximum 0to15(0*) 64charactersmaximum 32charactersmaximum 256charactersmaximum 20charactersmaximum 0to254(0*) 1to255seconds(5seconds*) 0to255(0*) 3to20KB(20KB*) Serviceonlycurrentlymountedform/Changeformsasneeded/ Minimizeformchangesacrossprintqueues/Minimizeform changeswithinprintqueues* 64charactersmaximum 32charactersmaximum 256charactersmaximum 0to254(0*) On,Off* Phase 2(fixing) 32charactersmaximum 32charactersmaximum Both*,Spool,Direct On,Off* 15charactersmaximum(Canon+representsthe lastsixdigitsofaMACaddress) 15charactersmaximum(WORKGROUP*) 48charactersmaximum On,Off* On,Off* 13charactersmaximum(PRINTER) On,Off* NTLMv1*,NTLMv2*
CanbesetinRemote UI
Yes
RprinterSettings PrintServerName FileServerName PrinterNumber NDSPServerSettings PrintServerName TreeName Context PrintServerPassword PrinterNumber PollingInterval PrinterForm BufferSize ServiceMode
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
NPrinterSettings PrintServerName TreeName Context PrinterNumber AppleTalkSettings UseAppleTalk Phase ServiceName Zone PrintMode SMBServerSettings UseSMBServer ServerName Workgroup Comment LMAnnounce SMBPrinterSettings UseSMBPrint PrinterName SMBAuth.Settings UseSMBAuthentication AuthenticationType SNMPSettings
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
XXVIII
XXIX
Item
GetPrinterMgmtInfofromHost UseSNMPv1 CommunityName1Settings CommunityName1 MIBAccessPermission CommunityName CommunityName2Settings CommunityName2 MIBAccessPermission CommunityName UseSNMPv3 UserSettings UserOn,Off Register On,Off* On*,Off
SettingDescription
CanbesetinRemote UI
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
On*,Off Read/Write/ReadOnly* CommunityName(32charactersmaximum)(public*) On,Off* Read/Write/ReadOnly* CommunityName(32charactersmaximum)(public2*) On,Off* User/MIBAccessPermission/SecuritySettings/Authent. Algorithm/Authent.Password/EncryptionAlgorithm/Encryption Password User/MIBAccessPermission/SecuritySettings/Authent. Algorithm/Authent.Password/EncryptionAlgorithm/Encryption Password ContextName(32charactersmaximum) ContextName(32charactersmaximum) -
Details/Edit
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Delete ContextSettings Register Edit Delete DedicatedPortSettings DedicatedPortSettings UseSpoolFunction UseSpoolFunction StartupSettings StartupSettings EthernetDriverSettings AutoDetect CommunicationMode EthernetType MACAddress IEEE802.1XSettings UseIEEE802.1X User Password TLSSettings UseTLS Key and Certificate
On*,Off On,Off* 0to300seconds(0*) On*,Off HalfDuplex*/FullDuplex 10Base-T*,100Base-TX,1000Base-T Displayonly On,Off* NameoftheusertobeauthenticatedwithIEEE802.1X authentication Passwordoftheusertobeauthenticatedwith IEEE802.1Xauthentication On,Off*
XXIX
XXX
Item
SetastheDefaultKey Certificate Details
SettingDescription
Version/SerialNumber/SignatureAlgorithm/IssueDestination/ StartDateofValidity/EndDateofValidity/Issuer/PublicKey/ Cert.Thumbprint/Certificate Displayswhatthekeypairisbeingusedfor. On,Off* MSCHAPv2*,PAP On,Off* 24charactersmaximum Time,Category,IPAddress,Result
CanbesetinRemote UI
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
DisplayUseLocation TTLSSettings UseTTL TTLSSettings PEAPSettings UsePEAP SameUserNameasLoginName LoginName FirewallSettings IPAddressBlockLog IPv4AddressFilter SendFilter UseFilter DefaultPolicy IPv4Address ReceiveFilter UseFilter DefaultPolicy IPv4Address IPv6AddressFilter SendFilter UseFilter DefaultPolicy IPv6Address RecieveFilter UseFilter DefaultPolicy IPv6Address MACAddressFilter SendFilter UseFilter DefaultPolicy MACAddress RecieveFilter UseFilter DefaultPolicy MACAddress
XXX
XXXI
ExternalInterface
*DefaultSettings Item
USBSettings UseUSBDevice UseMEAPDriverforUSBDevice UseMEAPDriverforUSBExternalDrive On*,Off On,Off* On,Off*
SettingDescription
DeviceInformation DeliveryAvailable
Yes Yes Yes
T-9-16
Accessibility
*DefaultSettings Item
KeyRepetitionSettings ReversedDisplay(Color)
SettingDescription
Standard*,SlightlySlow,Slow On,Off*
DeviceInformation DeliveryAvailable
No No
T-9-17
Adjustment/Maintenance
AdjustImageQuality
*DefaultSetting Item
AutoAdjustGradation CorrectDensity CorrectShading CorrectColorMismatch ZoomFineAdjustment
SettingDescription
QuickAdjust:Press[Start] FullAdjust:Automaticafterthemachineprintsandscansfoursetsoftestpages Copy/ScanandStore(MailBox),BlackSend/ScanandStore(otherthanMailBox),ColorSend/ScanandStore(Other ThanMailBox)Light,Dark:1to9levels(5levels*) ShadingCorrection:VisualCorrection,ShadingCorrection:PrintServerCorrection Press[Start] X:-1.0%to+1.0%(0.1%increments)(0%*) Y:- 1.0 % to+ 1.0 %(0.1 % increments)(0%*)
DeviceInformation DeliveryAvailable
No No No No No
T-9-18
XXXI
XXXII
AdjustAction
*DefaultSetting *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
SaddleStitcherStapleRepositioning AdjustStitchingPosition*
SettingDescription
Press[Start] 2.0mmto+2.0mm,in0.25mmincrements(0mm)
DeviceInformation DeliveryAvailable
No No
T-9-19
Maintenance
*DefaultSetting Item
CleanInsideMainUnit CleanFeeder*1 OriginalScanningAreaCleaningMethod*1 Press[Start] Press[Start] Press[Done]
SettingDescription
DeviceInformation DeliveryAvailable
No No No
T-9-20
FunctionSettings
Common
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. *2Indicatesinformationthatisdeliveredonlyifthenumberofoutputtraysinthehostmachineandclientmachinesisthesame. *3Indicatesitemsthatcannotbeusedwiththedefaultsetting.Also,theAdobeLiveCycleRightsManagementESisnecessary.ContactyourlocalauthorizedCanondealer. Item
PaperFeedSettings PaperDrawerAutoSelectionOn/Off Multi-PurposeTray Other Copy FeedMethodSwitch SuspendedJobTimeoutOn, PaperOutputSettings OutputTraySettings*1 IftheInner2WayTray-F1IsAttached TrayA TrayB IftheInner2WayTray-F1andCopyTray-J1AreAttached TrayA
SettingDescription
Copy,Printer,AccessStoredFile,Receive/Fax,Other On,Off* On*,Off ConsiderPaperType:On*,Off SpeedPriority*,PrintSidePriority On,Off*
Deviceinformation DeliveryAvailable
No No No No No Yes
XXXII
XXXIII
Item SettingDescription Deviceinformation DeliveryAvailable
No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 No*3 Yes Yes No No Yes
TrayB Copy,MailBox,Printer*,Receive,Fax,Other TrayC Copy,MailBox,Printer,Receive*,Fax*,Other* IftheInnerFinisher-A1andInnerFinisherAdditionalTray-A1AreAttached TrayA Copy*,MailBox*,Printer,Receive,Fax,Other TrayB Copy,MailBox,Printer*,Receive*,Fax*,Other* IftheInnerFinisher-A1andCopyTray-J1AreAttached TrayA Copy*,MailBox*,Printer,Receive,Fax,Other TrayB Copy,MailBox,Printer*,Receive*,Fax*,Other* IftheInnerFinisher-A1,InnerFinisherAdditionalTray-A1andCopyTray-J1AreAttached TrayA Copy*,MailBox*,Printer,Receive,Fax,Other TrayB Copy,MailBox,Printer*,Receive,Fax,Other TrayC Copy,MailBox,Printer,Receive*,Fax*,Other* IftheStapleFinisher-C1orBookletFinisher-C1,BufferPassUnit-G1,andExternal2/3HolePuncher-B1AreAttached TrayA Copy*,MailBox*,Printer,Receive,Fax,Other TrayB Copy,MailBox,Printer*,Receive,Fax,Other TrayC Copy,MailBox,Printer,Receive*,Fax*,Other* TrayHomePosition TrayA*,TrayB,Off OffsetJobs*1 On*,Off JobSeparatorBetweenJobs On,Off* JobSeparatorBetweenCopies On,Off* DifferentPaperSizesfortheOutputTray On*,Off Unfinished Tab Paper Forced Output On,Off* PrintSettings PrintPriority Copy 1*,2,3 Printer 1,2*,3 AccessStoredFile,Receive,Fax,Other 1,2,3* Text/PhotoPriorityWhenACSIsSettoBlack TextPriority*,PhotoPriority LocalPrintDefaultSettings SelectPaper AllPaperSources,Auto* No.ofPrints 1to9,999sets(1set*) Finishing IfNoFinisherIsAttachedorOnlytheInner2WayTray-F1isAttached DoNotCollate,Collate(PageOrder)*,RotateCollate,Group (SamePages),RotateGroup IftheInnerFinisher-A1IsAttached DoNotCollate,Collate(PageOrder),Offset*,Group(Same Pages),OffsetGroup,Staple(Corner) IftheInnerFinisher-A1andInnerFinisherAdditionalTray-A1AreAttached DoNotCollate,Collate(PageOrder),Offset*,Group(Same Pages),OffsetGroup,Staple(Corner) IftheStapleFinisher-C1orBookletFinisher-C1,andBufferPassUnit-G1AreAttached DoNotCollate,Collate(PageOrder),Offset*,Group (SamePages),OffsetGroup,Staple(Corner:Top Left,BottomLeft,TopRight,BottomRight),(Double: Left,Right)
No
XXXIII
XXXIV
Item
IftheStapleFinisher-C1orBookletFinisher-C1,BufferPassUnit-G1,andExternal2/3 HolePuncher-B1AreAttached
SettingDescription
DoNotCollate,Collate(PageOrder),Offset*,Group (SamePages),OffsetGroup,Staple(Corner:Top Left,BottomLeft,TopRight,BottomRight),(Double: Left,Right),HolePunch On,Off* On,Off* On,Off* On,Off* Register,Delete,CheckPrint,Details Auto*,OriginalPriority,FormPriority Register,Edit,Delete On,Off* On,Off* On,Off* On,Off*
2-SidedPrinting DeleteFileAfterPrinting MergeandPrint OutputReportDefaultSettings 2-SidedPrinting RegisterForm SuperimposeImageQualityPriority RegisterCharactersforPageNo./Watermark CopySetNumberingOptionSettings NumberOptionON ID/UserName Date Text SecureWatermark/DocumentScanLock*1 ForcedSecureWatermark/Doc.ScanLock Copy MailBox Printer PrinterDriverWatermark/Doc.ScanLock AdjustBackground/CharacterContrast StandardValueSettings RelativeContrast StandardValueSettings LatentAreaDensity: ScanSettings TimingtoRaiseFeederTray*1 FeederJamRecoveryMethod*1 ScannerNoiseSettings*1 StreakPrevention BlackScanSpeed/ImageQualityPriority LTRR/STMTOriginalDetection RemoteScanDataCompressionRatio RemoteScanGammaValue AutoOnline AutoOnline GenerateFile
Deviceinformation DeliveryAvailable
No No No No Yes No Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
WhenStartispressed*,WhenPerformingfromPanel From1stPage*,FromStoppedOriginal Fast*,Quiet On*,Off SpeedPriority*,ImageQualityPriority DistinguishManually,UseLTRR*,UseSTMT HighRatio,Normal*,LowRatio Gamma1.0,Gamma1.4,Gamma1.8*,Gamma2.2 On,Off* On,Off*
XXXIV
XXXV
Item
HighCompressionImageQualityLevel ImageLevelinText/PhotoModeorPhotoMode ImageLevelinTextMode OCR(TextSearchable)Settings SmartScan Num.ofChar.forFileNameSetting Trace&SmoothSettings OutlineGraphics GraphicsRecognitionLevel BackgroundImageLevel OOXMLSettings ColorImageRecognitionLeve ColorImageLineWidthRecognition BackgroundImageLevel FormatPDFtoPDF/A OptimizePDFforWeb RightsManagementServerSettings*3
SettingDescription
DataSizePriority,Normal,ImageQualityPriority DataSizePriority,Normal,ImageQualityPriority On*,Off 1to24* On,Off Normal,Moderate,High DataSizePriority,Normal,ImageQualityPriority DoNotRecognize,Normal,High On,Off DataSizePriority,Normal,ImageQualityPriority On,Off On,Off
Deviceinformation DeliveryAvailable
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
T-9-21
Copy
*DefaultSettings Item
Register/EditFavoriteSettings ChangeDefaultSettings Register[Options]Shortcuts Shortcut1 Shortcut2 Shortcut3 Shortcut4 Shortcut5 SetExpressCopyShortcuts Shortcut1 Shortcut2 Shortcut3 Shortcut4 Shortcut5 Shortcut6 AutoCollate AutoOrientation SelectColorSettingsforCopy Use[Auto(Color/Black)]
SettingDescription
Register/Edit,Delete(M1toM9),CheckContent Register,Initialize Finishing*,NoSettings 2-Sided*,NoSettings Density*NoSettings OriginalType*,NoSettings NoSettings* NoSettings* NoSettings* NoSettings* NoSettings* NoSettings* NoSettings* On*Off On*Off On*Off
XXXV
XXXVI
Item
UseFullColor On*Off
SettingDescription
Printer
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
PrintReport PCL Configuration Page FontList PS RGBTestPrint CMY Test Print RGBColorChart CMYK Color Chart RestrictingPrinterJobs PDLSelection(Plug-nplay)*1
SettingDescription
DeviceInformation DeliveryAvailable
No No No No No No No Yes No
T-9-23
Send
*DefaultSetting *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. *4IndicatesitemthatappearsonlyiftheSuperG32ndLineFaxBoardisinstalledinadditiontoinstallingtheSuperG3FAXBoard. *5IndicatesitemthatappearsonlyiftheSuperG33rd/4thLineFaxBoardisinstalledinadditiontoinstallingtheSuperG3FAXBoard. Item
PrintReport TX/RXUserDataList FaxUserDataList*1 Print CommonSettings RegisterFavoriteSettingsEditFavoriteSettings ShowComment Display Confirmation for Favorite Settings ChangeDefaultScreen ChangeDefaultSettings Register[Options]Shortcuts Shortcut1 Shortcut2 TXReport Print
SettingDescription
DeviceInformation DeliveryAvailable No No
XXXVI
XXXVII
Item
ReportwithTXImage ReportwithColorTXImage CommunicationActivityReport AutoPrint(100Transmissions) SpecifyPrintTime TimerSetting Send/ReceiveSeparate TXTerminalID On*,Off On,Off* On*,Off On,Off* 00:00to23:59(00:00*) On,Off* On*,Off TXTerminalID:On PrintingPosition:Outside DisplayDestinationUnitName:On Telephone#Mark*1:FAX On*,Off 0to5times(3times*) Compact,Normal*,LowRatio Gamma1.0,Gamma1.4,Gamma1.8*,Gamma2.2 On*,Off On,Off* On,Off* On,Off* On,Off* On,Off* On,Off* 24charactersmaximum On*,Off On*Off ServernameorIPAddress(48charactersmaximum) 64charactersmaximum ServernameorIPAddress(48charactersmaximum) 32charactersmaximum 32charactersmaximum 0*to99(Iftheintervalissetto'0',theincominge-mailisnot checkedautomatically.) Standard*/APOP/POPAUTH On,Off* On,Off* UsernameforSMTPauthentication(64charactersmaximum) PasswordforSMTPauthentication(32charactersmaximum) On,Off* On,Off* On*,Off
SettingDescription
DeviceInformation DeliveryAvailable Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes No No No No No No Yes No No No No No No No
DeleteFailedTXJobs RetryTimes DataCompressionRatio YCbCr TX Gamma Value UseChunkedEncodingwithWebDAVSending LimitNewDestinations Fax E-mail I-Fax File AlwaysAddDeviceSignaturetoSend*1 RestrictFileFormats E-mail/IfaxSettings RegisterUnitName CommunicationSettings SMTPReceive POP SMTPServer E-mailAddress POPServer POPAddress POPPassword POPInterval POPAUTHMethod POPAuthenticationbeforeSending SMTPAuthentication(SMTPAUTH) User Password AllowSSL(POP) AllowSSL(SMTPSend) DisplayAuth.ScreenWhenSend
XXXVII
XXXVIII
Item
AllowSSL(SMTPReceive) MaximumDataSizeforSending DefaultSubject UseSMTPAuthenticationforEachUser SpecifyAuthenticationUserDest.toReply SetAuthorizedUserDestinationtoSender AllowSendingtoUnregisteredDestinations FullModeTXTimeout PrintMDN/DSNuponReceipt UseSendviaServer AllowMDNNotviaServer RestrictTXDestinationDomain RestrictTXDestinationDomains PermittedDomains ChangeDefaultScreen ChangeDefaultSettings Register[Options]Shortcuts Shortcut1 Shortcut2 Shortcut3 Shortcut4 RegisterSenderName(TTI) ECMTX SetPauseTime AutoRedial RedialTimes RedialInterval RedialWhenTXError CheckDialToneBeforeSending FaxTXReport ReportwithTXImage FaxActivityReport AutoPrint(40Transmissions) SpecifyPrintTime TimerSetting Send/ReceiveSeparate SetLine RegisterUserTelephoneNo. RegisterUnitName SelectLineType
SettingDescription
AlwaysSSL,On,Off* 0=(Off)/1to99MB(3MB*) 40charactersmaximum(AttachedImage*) On*,Off On,Off* On*,Off On,Off* 1to99hours(24hours*) On,Off* On,Off* On*,Off On,Off* Register,Details/Edit,Delete Standard*,AddressBook Register,Initialize Density*,NoSettings OriginalType*,NoSettings 2-SidedOriginal*,NoSettings DifferentSizeOriginals*,NoSettings 01to99:Register/Edit,Delete On,Off 1to15seconds(2seconds*) On,Off 1to15times(2times*) 2to99minutes(2minutes*) Errorand1stpage*,Allpages,Off On*,Off ForErrorOnly*,On,Off On*,Off On*,Off On,Off* 00:00to23:59(00:00*) On,Off*
DeviceInformation DeliveryAvailable No Yes Yes No No No Yes Yes Yes Yes Yes Yes No No No No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No
XXXVIII
XXXIX
Item
Line(2to8)
SettingDescription
IftheSuperG3FAXBoardandSuperG32ndLineFax Boardareinstalled: Line2 IftheSuperG3FAXBoard,SuperG32ndLineFax Board,andSuperG33rd/4thLineFaxBoardare installed: Line2,Line3,Line4 IftheSuperG3FAXBoardisinstalled: Line1:PriorityTX,ProhibitTX* IftheSuperG3FAXBoardandSuperG32ndLineFaxBoard areinstalled: Line1:PriorityTX,ProhibitTX* Line2:PriorityTX,ProhibitTX IftheSuperG3FAXBoard,SuperG32ndLineFax Board,andSuperG33rd/4thLineFaxBoardare installed: Line1:PriorityTX,ProhibitTX* Line2:PriorityTX,ProhibitTX Line3:PriorityTX,ProhibitTX Line4:PriorityTX,ProhibitTX 33600bps*,14400bps,9600bps,7200bps,4800bps,2400bps On,Off* On,Off* On,Off* On,Off* On,Off* On,Off* On*,Off HostnameortheIPaddress(48charactersmaximum) 1to99hours(24hours*) 1to4Line(1*) Line1,Line2*10,Line3*10,Line4*10 On*,Off
DeviceInformation DeliveryAvailable No
No
SelectTXLine
No
No
No
TXStartSpeed PINCodeAccess Line1 Line2*8 Line3*9 Line4*9 Confirm Entered Fax Numbers AllowFaxDriverTX RemoteFaxTXSettings RemoteFaxServerAddress TXTimeout SelectTXLine SelectPriorityLine RemoteFaxSettings UseRemoteFax
XXXIX
XL
Receive/Forward
*DefaultSetting *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. *7Indicatesitemthatisnotdeliveredasdeviceinformation. ReceiveType,Details/Edit,Delete,PrintList,E-MailPriority Item
PrintReport TX/RXUserDataList FaxUserDataList*1 CommonSettings PrintonBothSide SelectDrawer SwitchA SwitchB SwitchC SwitchD ReduceFaxRXSize Print Print On,Off* On*,Off On*,Off On*,Off On*,Off On*,Off On ReductionMode:Auto Reduction%:90% ReductionDirection:VerticalOnly On,Off* On,Off* Gamma1.0,Gamma1.4,Gamma1.8*,Gamma2.2 AlwaysPrint,Store/Print,Off* ReceiveType,Validate/Invalidate,Register(Registered ForwardingSettings),Forwardw/oConditions,E-MailPriority, Details/Edit,Delete,PrintList
SettingDescription
DeviceInformation DeliveryAvailable No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes*11
ReceiveTraySettings SetFax/I-FaxInbox Set/Register Confidential Fax Inboxes RegisterBoxName: PIN URLSendSettings Initialize MemoryRXInboxPIN UseFaxMemoryLock*1 UseI-FaxMemoryLock MemoryLockStartTime MemoryLockEndTime DividedDataRXTimeout AlwaysSendNoticeforRXErrors FaxSettings*1 ECMRX
00to49 24charactersmaximum Sevendigitsmaximum Sevendigitnumber On,Off* On,Off* Everyday,SelectDays,Off* Everyday,SelectDays,Off* 0to99hours(24hours*) *On,Off *On,Off
Yes Yes Yes Yes No No Yes Yes Yes Yes Yes Yes Yes
XL
XLI
Item
FaxRXReport Confidential Fax Inbox RX Report ReceiveStartSpeed ReceivePassword
SettingDescription
ForErrorOnly,On,Off* On*,Off 33600bps*,14400bps,9600bps,7200bps,4800bps,2400bps 20digitsmaximum
Store/AccessFiles
*DefaultSetting Item
CommonSettings ScanandStoreSettings Register/EditFavoriteSettings ChangeDefaultSettings SettingsofAccessStoredFile Register/EditFavoriteSettings ChangeDefaultSettings MailBoxSettings MailBoxSettings MailBoxNo. RegisterBoxName PIN TimeUntilDocumentAutoDelete URLSendSettings PrintuponStoringfromPrinterDriver Initialize SettingsforAllMailBoxes TimeUntilDocumentAutoDelete PrintuponStoringfromPrinterDriver AdvancedBoxSettings OpentoPublic AllowtoCreatePersonalSpace WebDAVServerSettings AuthenticationType UseSSL DeleteAllPersonalSpaces InitializeSharedSpace ProhibitWritingfromExternal AuthenticationManagement FileFormatsAllowedforStoring NetworkSettings NetworkPlaceSettings ProtocolforExternalReference
SettingDescription
DeviceInformation DeliveryAvailable
No No No No
00to99 24charactersmaximum Sevendigits 0(Off),1,2,3*,6,12hours,1,2,3,7,30days On,Off* 0(Off),1,2,3*,6,12hours,1,2,3,7,30days On,Off* BySMB,ByWebDAV,Off* On*,Off Basic,Off* On,Off* Delete Initialize On*,Off On,Off* Printable Formats Only, Common Office Formats, All Register,Details,Delete
No Yes Yes No Yes Yes No No No Yes Yes Yes Yes No No Yes Yes Yes Yes
XLI
XLII
Item
SMB WebDAB On*,Off On*,Off
SettingDescription
DeviceInformation DeliveryAvailable
Yes Yes
T-9-26
EncryptedSecurePrint
*DefaultSetting *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
OnlyAllowEncryptedPrintJobs*1 On,Off*
SettingDescription
DeviceInformation DeliveryAvailable
Yes
T-9-27
SetDestination
SetDestination
*DefaultSetting *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
AddressList RegisterDestinations RegisterAddressListName RegisterOne-touch ChangeDefaultDisplayofAddressBook AddressBookPIN ManageAddressBookAccessNumber RegisterLDAPServer AutoSearchWhenUsingLDAPServer AcquireRemoteAddressBook RemoteAddressBookServerAddress CommunicationTimeout FaxTXLineAutoSelectAdjustment MakeRemoteAddressBookOpen MakeRemoteAddressBookOpen
SettingDescription
AddressBook1to10,One-touch PrintList:Print RegisterNewDest.,Details/Edit,Delete,SearchbyName RegisterName Register/Edit,Delete Local*,LDAPServer,Remote Sevendigitnumber On,Off* ReceiveType,Validate/Invalidate,Register,Details/Edit, Delete,Forwardw/oConditions,PrintList,E-MailPriority On*Off On,Off* IPAddressorHostName(128charactersmaximum) 15to120seconds(30seconds*) On*,Off On,Off*
DeviceInformation DeliveryAvailable
No No Yes Yes Yes No Yes No Yes Yes No Yes Yes Yes
T-9-28
XLII
XLIII
ManagementSettings
UserManagement
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
SystemManagerInformationSettings SystemManagerID SystemPIN SystemManager E-MailAddress ContactInformation Comment DepartmentIDManagement DepartmentIDManagement RegisterPIN PageTotals AllowPrinterJobsWithUnknownIDs AllowRemoteScanJobsWithUnknownIDs AllowBlackCopy/MailBoxPrintJobs AllowBlackPrinterJobs
SettingDescription
Sevendigitnumbermaximum Sevendigitnumbermaximum 32charactersmaximum 64charactersmaximum 32charactersmaximum 32charactersmaximum On,Off* Register,Edit,Delete,LimitFunctions Clear,PrintList,ClearAllTotals,Large2CountManagement On*,Off On*,Off On,Off* On,Off*
DeviceInformation DeliveryAvailable
Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes
T-9-29
DeviceManagement
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
DeviceInformationSettings DeviceName Location DeviceInformationDeliverySettings RegisterDestinations
SettingDescription
32charactersmaximum 32charactersmaximum AutoSearch/Register,Register,Details,Delete,PrintList AutoSearch/Register List SearchDepth(Router):1to8 DisplayHostName:On,Off StartAutoSearch Everyday,SelectDays,Off* On,Off* NetworkSettings:Include,Exclude On,Off*
DeviceInformation DeliveryAvailable
No No
XLIII
XLIV
Item
AddressBook PrinterSettings PaperInformation ManualDelivery Settings/RegistrationValue Dept.ID AddressBook PrinterSettings PaperInformation RestrictionsforReceivingDeviceInfo. RestoreData ReceiveRestrictionforEachFunction Settings/RegistrationValue Dept.ID AddressBook PrinterSettings PaperInformation CommunicationLog On,Off* On,Off* On,Off*
SettingDescription
DeviceInformation DeliveryAvailable
On,Off* NetworkSettings:Include,Exclude On,Off* On,Off* On,Off* On,Off* On*,Off Settings/RegistrationValue,Dept.ID,AddressBook,PrinterSettings,PaperInformation On*,Off On*,Off On*,Off On*,Off On*,Off Details,PrintList,ReportSettings ReportSettings AutoPrint(100transmissions):On*,Off SpecifyPrintTime:On,Off* 00:00*to23:59 SeparateReportType:On,Off* On,Off* PartialFunctions*,AllFunctions Certificate Details: Certificate Certificate Details: Certificate
LimitedFunctionsMode LimitFunctionsWhenSecurityKeyisOff* Confirm Device Signature Certificate Check User Signature Certificate Certificate Settings Certificate Settings:Generate Network Communication Key KeyName 24charactersmaximum KeyAlgorithm RSA,Displayonly KeyLength(bit) 512*,1024 StartDateofValidity Month, Date, Year(2000/01/01~2048/12/31) EndDateofValidity Month, Date, Year(2000/01/01~2048/12/31) Country/Region Country/Regionnameandcode(2charactersmaximum) State 24charactersmaximum City 24charactersmaximum Organization 24charactersmaximum OrganizationUnit 24charactersmaximum CommonName IPaddressorFQDN(24charactersmaximum) Certificate Settings:Generate Key Generate/UpdateDeviceSignatureKey Certificate Settings: Key and Certificate List: Key and Certificate List for this Machine Editing Key Pairs and Server Certificates Confirming a Key Pair and Device Certificate
No Yes No No
No No No No No No No No No No No No
XLIV
XLV
Item
Certificate Details
SettingDescription
Version/SerialNumber/SignatureAlgorithm/Issue Destination/StartDateofValidity/EndDateofValidity/Issuer/ Public Key/Cert. Thumbprint/Certificate Displayswhatthekeypairisbeingusedfor Version/SerialNumber/SignatureAlgorithm/IssueDestination/ StartDateofValidity/EndDateofValidity/Issuer/PublicKey/ Cert. Thumbprint/Certificate Version/SerialNumber/SignatureAlgorithm/IssueDestination/ StartDateofValidity/EndDateofValidity/Issuer/PublicKey/ Cert. Thumbprint/Certificate KeyName(24charactersmaximum) Password(24charactersmaximum) On*,Off On*,Off On*,Off On ObtainJobLogFromManagementSoftware:Permit, DoNotAllow*
DeviceInformation DeliveryAvailable
No
Delete DisplayUseLocation Certificate Settings: Key and Certificate List: Key and Certificate List for Users* Certificate Details
No
No No
No No No No No No Yes No No No
T-9-30
Delete Certificate Settings:Register Key and Certificate Register Delete Certificate Settings:Register CA Certificate Register Delete Display Asterisks For Confidential Info. DisplayStatusBeforeAuthentication JobLogDisplay
License/Other
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
RegisterLicense MEAPSettings PrintSystemInformation UseSSL
SettingDescription
24charactersmaximum Print On,Off* On UseSSL:On,Off* On*,Off
DeviceInformation DeliveryAvailable
No No No No Yes
RemoteUI
XLV
XLVI
Item
UseSSL On,Off* On UseSSL:On,Off* On,Off* Clear
SettingDescription
DeviceInformation DeliveryAvailable
No No Yes No
T-9-31
UseReferencePrint DeleteMessageBoardContents
DataManagement
*DefaultSettings *1Indicatesitemsthatappearonlywhentheappropriateoptionalequipmentisattached. Item
HDDDataCompleteDeletion* TimingofDeletion DeletionMode
SettingDescription
DuringJob*,AfterJob OverwriteOnceWith0(Null)Data*,Overwrite1TimeWith RandomData,Overwrite3TimesWithRandomData,DOD Standard Initialize BackupTPMKey,RestoreTPMKey
DeviceInformation DeliveryAvailable
No No No No
T-9-32
InitializeAllData/Settings TPMSettings
XLVI
XLVII
BackupData
WhethertoDeleteorNotuponExecution DatatoBeStored When When Replacing Replacing DataLocation HDD/ MainPCB1 ExecutingAll Format
HDD/SRAM HDD/SRAM SRAM SRAM SRAM SRAM SRAM Clear Clear -------------------------
InitializeAll Data/Settings
Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear ----------Clear Clear Clear
CanDataBe Backedup?
Yes Yes Yes *1 Yes Yes *2 Yes Yes *3 Yes Yes Yes *4 No No No Yes Yes Yes Yes No No No No Yes *5 Yes Yes Yes Yes No Yes Yes *6 No Yes Yes Yes *7 No No No No
Method
LocationtoBe Stored
PC PC PC PC PC PC PC PC PC PC ------PC PC PC PC --------PC PC PC PC PC --PC PC --PC PC
RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUIImport/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) ------RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) RemoteUI(Import/Export) --------RemoteUI(Backup/Restore) RemoteUI(Backup/Restore) RemoteUI(Backup/Restore) RemoteUI(Backup/Restore) RemoteUI(Import/Export) --RemoteUI(Backup/Restore) RemoteUI(Import/Export) --SMS SMS/Login -----------
PrinterSettings SRAM ----Clear --PaperInformationSettings HDD Clear ------SettingitemsforeachmenuinMainMenu(Copy,ScanandSend,Fax,ScanandStore,AccessStoredFiles,Fax/I-FaxInbox) FavoriteSettings HDD Clear ------DefaultSettings ShortcutsettingsforOptions PreviousSettings SettingitemsforQuickMenu ButtonSizeinformation WallpaperSetting ButtoninformationinQuickMenu RestrictQuickMenu SettingitemsforMainMenu ButtonsettingsinMainMenu Buttonsettingsonthetopofthescreen WallpaperSettingforMainMenu OthersettingsforMainMenu Document files in Mail Box, Fax box, Memory RX Inbox,AdvancedBox MailBoxSettings(BoxName,PIN,TimeUntilFileAuto Delete) Faxsettings(FaxBoxName,PIN) MemoryRXInboxsettings(PIN) UserinformationofAdvancedBox RegistrationinformationofNetworkPlace FormofSuperimposeImage WebAccessSettinginformation MEAPapplication MEAP application license file UserauthenticationinformationregisteredbySSO-H (SingleSign-OnH)localdeviceauthentication DatasavedbyMEAPapplication MEAPSMS(ServiceManagementService)password Unsentdocument(whichissettimertransmissionor reservationtransmission) Jobloginformation Key and server certificate which are registered in Management Settings>Device Settings>Certificate Settings AutoAdjustGradationsettingvalues HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD HDD (Partially, SRAM) HDD Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear -------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------
Clear Clear
-----
-----
-----
Clear Clear
-----
-----
-----
-----
-----
No No
-----
-----
PSfont
XLVII
XLVIII
WhethertoDeleteorNotuponExecution DatatoBeStored When When Replacing Replacing DataLocation HDD/ MainPCB1 ExecutingAll Format
SRAM HDD TPMBoard SRAM SRAM(DCCON) EEPROM (R-CON) Clear
8
Backup Function >CLEAR >R-CON Function >CLEAR >MMI Function >CLEAR >ADRS-BK CanDataBe Backedup? LocationtoBe Stored
InitializeAll Data/Settings
Method
TPMkey
Clear *9 -------
--Clear -----
Clear -------
Clear *9 -------
----Clear ---
------Clear
---------
---------
-------
Settings/Registrationmode (ManagementSettings>Data USBmemory Management>TPMSettings) ----Servicemode(COPIER>FUNCTIO HDD N>SYSTEM>DSRAMBUP) Servicemode(COPIER>FUNCTIO HDD N>SYSTEM>RSRAMBUP)
T-9-33
*1Followingdatacannotbebackedup. Timer/EnergySettings>AdjustTime,Date/TimeSettings Network>SNMPSettings>UseSNMPv.3>UserSettings,ContextSettings *2Followingdatacannotbebackedup. Receive/Forward>CommonSettings>ForwardSettings>Fax/I-FaxInboxSettings *3Followingdatacannotbebackedup. UserManagement>DepartmentIDManagement>PageTotal *4Only"FavoriteSettings"of"ScanandSend"canbebackedup. *5 When option HDD is installed, document files in Advanced Box cannot be backed up. *6Only"WebBrowserFavorites"canbebackedup. *7DatacanbebackeduponlywhenMEAPapplicationhasabackupfunction. *8WhenTPMsettingis"ON",errorcodeisdisplayedandtheTPMsettingisswitchedto"OFF"afterrestart. *9WhenTPMsettingis"ON",itisswitchedto"OFF". *10OnlythebackupforTPMPCBtroubleisenabled.DatacannotberestoredtotheotherdeviceswhoseTPMsettingis"ON".
XLVIII