Professional Documents
Culture Documents
ULN2803APG
ULN2803APG
Features
Output current (single output) 500 mA (Max.) High sustaining voltage output 50 V (Min.) Output clamp diodes Inputs compatible with various types of logic. Package TypeAPG Package TypeAFWG : DIP18pin : SOL18pin
ULN2803AFWG ULN2804AFWG
2006-02-15
ULN2803,04APG/AFWG
Schematics (each driver)
ULN2803APG / AFWG ULN2804APG / AFWG
Note:
The input and output parasitic diodes cannot be used as clamp diodes.
Note:
2006-02-15
ULN2803,04APG/AFWG
Recommended Operating Conditions (Ta = 40~85C)
Characteristic Output sustaining voltage Symbol VCE (SUS) Tpw = 25 ms, Duty = 10%, 8 Circuits Tpw = 25 ms, Duty = 50%, 8 Circuits Tpw = 25 ms, Duty = 10%, 8 Circuits Tpw = 25 ms, Duty = 50%, 8 Circuits VIN ULN2803A ULN2804A VIN (ON) VR IF PD Ta = 85C Ta = 85C (Note) Test Condition Min 0 0 0 0 0 0 3.5 8 Typ. Max 50 347 123 268 90 30 30 30 50 400 0.76 0.48 V V V mA W Unit V
mA / ch
Clamp diode reverse voltage Clamp diode forward current Power dissipation APG AFWG
Note:
2006-02-15
ULN2803,04APG/AFWG
Electrical Characteristics (Ta = 25C)
Characteristic Symbol Test Cir Cuit 1 Test Condition VCE = 50 V ICEX VCE = 50 V VCE = 50 V Ta = 25C Ta = 85C VIN = 1 V Min 50 1000 RL = 125 , VOUT = 50 V RL = 125 , VOUT = 50 V Typ. 1.3 1.1 0.9 0.93 0.35 1.0 65 15 0.1 0.2 Max 50 100 500 1.6 1.3 1.1 1.35 0.5 1.45 2.4 2.7 3.0 5.0 6.0 7.0 8.0 50 100 2.0 A V pF s V A mA V A Unit
IOUT = 350 mA, IIN = 500 A Collectoremitter saturation voltage VCE (sat) 2 IOUT = 200 mA, IIN = 350 A IOUT = 100 mA, IIN = 250 A ULN2803A Input current ULN2804A IIN (ON) 2 VIN = 3.85 V VIN = 5 V VIN = 12 V IIN (OFF) 4 IOUT = 500 A, Ta = 85C VCE = 2 V, IOUT = 200 mA ULN2803A Input voltage (Output on) ULN2804A VCE = 2 V, IOUT = 250 mA VCE = 2 V, IOUT = 300 mA VIN (ON) 5 VCE = 2 V, IOUT = 125 mA VCE = 2 V, IOUT = 200 mA VCE = 2 V, IOUT = 275 mA VCE = 2 V, IOUT = 350 mA DC current transfer ratio Clamp diode reverse current Clamp diode forward voltage Input capacitance Turnon delay Turnoff delay hFE IR VF CIN tON tOFF 2 6 7 8 VCE = 2 V, IOUT = 350 mA Ta = 25C Ta = 85C IF = 350 mA (Note) (Note)
Note:
VR = VR MAX.
2006-02-15
ULN2803,04APG/AFWG
Test Circuit
1. ICEX 2. VCE (sat), hFE 3. IIN (ON)
4.
IIN (OFF)
5.
VIN (ON)
6.
IR
7.
VF
2006-02-15
ULN2803,04APG/AFWG
8. tON, tOFF
Note 1: Pulse Width 50 s, Duty Cycle 10% Output Impedance 50 , tr 5 ns, tf 10 ns Note 2: See below. Input Condition
Type Number ULN2803A ULN2804A R1 0 0 VIH 3V 8V
2006-02-15
ULN2803,04APG/AFWG
2006-02-15
ULN2803,04APG/AFWG
2006-02-15
ULN2803,04APG/AFWG
Package Dimensions
DIP18P3002.54F Unit: mm
2006-02-15
ULN2803,04APG/AFWG
Package Dimensions
SOL18P3001.27 Unit: mm
10
2006-02-15
ULN2803,04APG/AFWG
Notes on Contents
1. Schematics
The schematics may be simplified or some parts of them may be omitted for explanatory purposes.
4. AC Characteristics
AC characteristics that mean turn-on and turn-off time are targeted design values and not guaranteed.
5. Application Circuits
The application circuits shown in this document are provided for reference purposes only. Thorough evaluation is required, especially in the phase of mass production design. In furnishing these examples of application circuits, Toshiba does not grant the use of any industrial property rights.
6. Graphics Characteristics
Graphics characteristics are reference ones and not guaranteed.
Handling of the IC
Ensure that the product is installed correctly to prevent breakdown, damage and/or degradation in the product or equipment.
11
2006-02-15
ULN2803,04APG/AFWG
12
2006-02-15