Professional Documents
Culture Documents
1.
Construct free body diagram of (a) of the pulley shown in Fig. 1, (b) each cylinder shown in Fig. 2, and (c) each block in Fig. 3, each modelled as a particle.
E DD
100kg
Pulley
A
P B 1.2 m
m2 m1 R R
3.2 m
1.6 m
D Fig. 2
Fig. 1
m1
T Fig. 3
m2
2. The four-bar mechanism ABCD in Fig. 4 is attached by a spring at its left end to a rigid wall and by a rigid bar at its right end to the right wall. The spring constant k = 10.2 kN/m. Initially, when a = 0, all bars are horizontal and the spring tension is 200 N. The load P is then applied, and the bars open to the position shown. Find the force P required to cause this deformation. P 0.5 m k = 10.2 kN/m A D P Fig. 4 B a = 0.25 m C a = 0.25 m
3. A cable of length 8.5 m is attached to the two posts as shown in Fig. 5. The crate has a mass of 1000 kg. Find the x and y components of the forces exerted by the cable on the eyebolts and find the tension force in the cable.
Fig. 5