Professional Documents
Culture Documents
Dr Mohd. Islam Professor Office Address: Department of Mechanical Engineering, F/O- Engineering & Technology, Jamia Millia Islamia, Jamia Nagar, New Delhi - 110025 26981259 (Direct) 65135158 (Board Number) 09213636997 (Mobile) 26311261 mislam@jmi.ac.in , mislamjmi@gmail.com.
(1).Academic Performance:
Grade I I I
(2).Employment Profile:
Name of Institutes Jamia Millia Islamia Jamia Millia Islamia Jamia Millia Islamia Jamia Millia Islamia
(iii)Research/M.Tech./B.TechProject:
Examined the M. Tech. Thesis of the following; Applied Mechanics Department IIT Delhi. IET Khandari, Dr. BR Ambedkar University, Agra. Have a privilege to guide a number of B. Tech. & BE Project in Mech. Engg. Deptt., Jamia Millia Islamia, New Delhi.
5. Research thrust areas recognized by funding agencies: Fluid Mechanics, Instrumentation Measurements, MicroChannel, 6. Inter-institutional collaborative projects and grants received Collaborative Name Project 1. All India a) b) agency 1. IIT Delhi; 2. National Physical Laboratory, Delhi; 3. K.I.E.T Murad Nagar Ghaziabad 7.Departmental projects funded by MHRD (15 Lacs) 8. a) Details Regarding Research Papers (National & International Journals)
S N o Title of the paper Journal Name Volume/ Nos year n 01 Effect of geometrical parameters of small Gas Turbine Flow meters. Mohd. Islam, Abdul Mubeen, V. Seshadri & S.N. Singh. Indian Journal of Technology Page 1991 No. CSIR 507-510, & of Publisher Number listed l in Internationa Database /ISSN No. Impact Factor of the Journa l No of NIP of this SJR Citations paper/S
of
NONE
New
publicatio
02
Effect of swirl on a turbine meter in air flow and effectiveness of a flow straightener in removing the swirl. Mohd. Islam, M.M. Hassan, S.N. Singh and V. Seshadri.
Journal n society
of of of
Page
No.
ISSN 0221
1748-
instrumentatio India Journal Mechanical Engineering Research Indian journal of Engineering & Materials Journal International Review Mechanical Engineering Journal Aerospace Engineering of of of
24-27, 2003
Experimental approach to study friction factor and temperature profile of fluid flow in circular micro-channel. Mohd. Islam, M.M. Hassan, Mohd Nadeem Khan.
Page
no.
Academic Journal
0.329
0.034
Flow characteristics of a symmetric Yshaped diffusing duct at different cross section with zero Yaw angle. Natrapal Singh, Abdul Rahim, Mohd. Islam.
CSIR, Delhi.
ISSN 1017
0975-
0.233
An Experimental Investigation over a YShaped diffusing duct with 600 mm CL and 764 mm RC with different Yaw angles (00, 100, 200 ): A Comparative Study. Natrapal Singh, Abdul Rahim, Mohd. Islam.
ISSN : 19708734
6.46
Experimental Study of Flow Characteristics of a Symmetric Y-Shaped Intake Diffusing Duct with 600 mm CL & 764 mm RC at Different Cross Sections. Natrapal Singh, Abdul Rahim, Mohd. Islam. Lithium Ferrite Nano Particles for ferro fluid applications. V.K. Shankaracharyanan, Om Prakash, R.P.Panth and Mohd. Islam.
ISSN : 08931321
0.71
0.986
0.052
of and
Vol 2002
252,
Bremer, Germany
ISSN : 03048853
1.78
1.43
0.143
Novenber
An Investigation of Skewed velocity profile effect on the turbine flow meter performance. Mohd. Islam, V. Seshadri , S.N. Singh and M.M. Hassan.
of
Vol Part
217 E,
SAGE Publications
0.393
Nov 2002 of of Dec 2005 SAGE Publications ISSN 4062 09540.407 0.364 0.03
9.
Numerical solution of boundary layer flow past a stretching plate. Waqar Ali, Mohd. Islam, Abdur Rahim.
10
Boundary layer flow and drag estimation on the body of a moving car. Waqar Ali, Mohd.Islam&Abdur Rahim.
Vol
33
ISSN 2277
1064-
0.207
0.035
journal of fluid mechanics research International journal Mechanical and automobile Engineering of
April 2006
11
Heat transfer through micro channel. Mohd Nadeem Khan, Mohd. Islam & M.M.Hasan.
Academic Journal
ISSN : 0974231X
12
Flow Characteristics of Blood in Micro Channels Mohd Nadeem Khan, Mohd. Islam & M.M.Hasan.
Vol 2009
10,
ISSN 4562
0973-
0.44
13
Analytical analysis of fluid flow and heat transfer through micro-channel Mohd Nadeem Khan, Mohd. Islam & M.M.Hasan.
International Journal Applied Engineering Research International Journal Applied Engineering Research International Journal of fluid engineering research International journal Applied mechanics International Journal Engineering Science Technology Journal & of of of Theoretical and of of
Page
No.
ISSN 4562
0973-
14
Factors
Responsible
for
discrepancies
ISSN 4562
0973-
between theoretical experimental results of fluid flow and heat transfer through Micro channel Mohd Nadeem Khan, Mohd. Islam & M.M.Hasan. 15 Parameters effecting the friction factor in rough and smooth pipe MohdNadeemKhan, Mohd.Islam & M.M.Hasan. 16 Comparative study of friction factor for turbulent n. 17 Alternative approach for predicting average Nusset number of fully developed flow in circular micro-channel. MohdNadeemKhan ,Mohd.Islam & M.M.Hasan. 18 Experimental investigation of fluid flow and flow through rough pipe. MohdNadeemKhan,Mohd.Islam&M.M.Hasa
0.207
0.035
Page 2011
no.
47-52 Nov
ISSN 5462
0975-
Praise worthy
heat transfer in circular micro channel. MohdNadeemKhan M.M.Hasan. 19 Investigation of fluid flow and heat transfer in circular micro channel. & flow MohdNadeemKhan, M.M.Hasan. 20 The effect of Yaw angles on characteristics of a symmetric Y shaped diffusing duct with 300 mm CL and 382 mm RC at different cross Sections: . An Experimental 21 Investigation. Natrapal Mohd.Islam ,Mohd.Islam &
Mechanical Engineering & Technology International Review Mechanical Engineering Journal International Review Aerospace Engineering International Journal Engineering Studies of of of of
217, Vol 3 (6), 2011 Volume 5, 2011 Research India Publication Dec 2012 Praise Worthy, Italy. ISSN:19737459 6.50 0.986 0.052 ISSN 8742 19706.46 0.141 0.026 June
Singh, Abdul Rahim, Mohd. Islam. Thermodynamics Simulation performance of Combined Cycle Peak Temperature & Specific Heat Ratio of Working Fluid.Arvind Tiwari, M.M.Hasan & Mohd.Islam. Volume 2(3) P 307-316 1.251 0.062
3 4 5 6 7 8
"Effect of Swirl flow on the performance of small Gas Turbine Flowmeters" Mohd Islam ,V Seshadri & SN Singh. "Analytical Model for the prediction of the Turbine Flow meter performance. Mohd Islam ,V Seshadri & SN Singh. "Effectiveness of different type of straighter on the turbine flow meter performance". Mohd Islam ,V Seshadri & SN Singh. "Parametric Investigation on the performance of a Turbine Flow meter" . Mohd Islam ,V Seshadri & SN Singh. "Turbine Flowmeter performance under distorted upstream condition, Effectiveness of Flow Straightness". Mohd Islam ,V Seshadri & SN Singh. "Effectiveness of Tube Type Flow Straightness on the performance of Turbine flow meter in presence of upstream distributed flow conditions" . Mohd Islam ,V Seshadri & SN Singh.
19th FMFP, Mumbai. 8th ISME 20th FMFP 9th ISME, 21st FMEP 1st International,FMFP
December 1992. December 1993. December 1993. University of Roorkee, 1994. (Page 353-359). 1994. December 15th 1998, IIT Delhi (Page 521-535).
9.
"Influence of CO. and contra swirl on the pressure drop across meter and meter factor of small gas turbine flow meter. Mohd Islam ,V Seshadri & SN Singh.
10 11 12
"Pressure drop and Meter Factor of a gas Turbine flow meter for a co & contra swirl Flow" . Mohd Islam ,V Seshadri & SN Singh. "Effect of Fluid density on the turbine flow meter performance". Mohd Islam ,V Seshadri & SN Singh. "Synthesis and Characterization of Lithium Ferrite Nano-particles for Ferro fluid applications".Om Prakash,,VK Shankracharayan,R.F.Fanth & Mohd Islam.
Feb 3-4, 1999. 3-15, Dec 2000, Palghat, Kerala, India, (Page No. 385-390). Feb 3-4, 1999.
13
"Effect of Angle of Attack on the Lift Force, Drag Force and Pressure Distribution Around an Aeroplane Model".Mohd Islam & Abdul Mubeen.
377. 14 15 "Devices for highly accurate measurement". Mohd Islam ,MM Hasan & Badshah Alam. "Ferro-fluid Technology of l-Li, Fi5 O8 Nano particles".Om Prakash , Mohd |Islam & MM Hasan. 16 A Comparative Study of Mechanical and Electromechanical Devices in the Measurement of Pressure".Mohd Islam & MN Karimi. 17 18 Abrasive Friction and Wear Behavior of Al-SiCp Composite for Valve Guide". G Hemath Kumar,Probir Saha,R Sagar & Mohd Islam. "Reciprocating friction and wear behavior of Al-SiCp composite for automatic part. G Hemath Kumar, R Sagar & Mohd Islam. 19 Future Power Planning For Sustainable Development". Abdul Mubeen, MM Hasan,M Emran Khan,JA Usmani & Mohd Islam. 20 "The Effect Of Particle Characteristics On Abrasive Wear Using Pin-OnDrum Wear Testing Machine." G Hemath Kumar, R Sagar & Mohd Islam. 21 "Analysis Of Deep Hole In Poppet Valve Guides (Al-SiCp) Using Electro Chemical Machining". G Hemath Kumar, R Sagar & Mohd Islam. 22 "Microstructure Characterization And Mechanical Properties Of Al-SiCp Composites". G Hemath Kumar, R Sagar & Mohd Islam. All India Manufacturing Technology, Design and Research Conference. National Conference On Energy Environment, National Conference On Advances In Mechanical Engineering National Conference On Advances In Mechanical Engineering International Conference (AME-SRM) December 14-16, 2006.Chennai. (AIME-2006), JMI, New Delhi, India, On January 20-21, 2006. (AIME-2006), JMI, New Delhi, India, On January 20-21, 2006. And 2004, JMI, New Delhi. 20-22 Dec. 2004, Vellore, Tamil Nadu. National Confrence on Materials & Devices National Conference on Materials and Devices. National Symposium of Instrumentation 27), INCARF Conference IIT Delhi, 2003. (NSIMarch March Bariely. 27-29 Nov 2002, Coimbatore. 9-10, 2002, 9-10, M.J.P 2002, University Rohilkhund University, Barielly. M.J.P.Rohilkhund
10
23 24 25
"Effect Between Abrasive and Dry Sliding Wear Behavior of Al-SiCp Composite". G Hemath Kumar, R Sagar & Mohd Islam. "Effect of Boundary Layer Drag on Power Consumption of a Moving Car". Waqar Ali,Mohd Islam,Abdur Rahim & Naseem Ahmed. "Boundary Layer Flow Over an Aerodynamic Body. Waqar Ali,Mohd Islam & Abdur Rahim
December 14-16, 2006. Chennai. December 1-3, 2006, Fatehgarh Sahib, Punjab, India. November 10-11, 2006, Institute of Engineering and Technology, Patiala, Punjab, India.
26
"Drag estimation due to Boundary layer flow over a flat surface". Waqar Ali,Mohd Islam,Abdur Rahim & Naseem Ahmed.
National Conference on Trends and Advances in Mechanical Engineering, 3rd International Conference(ICAME2010) (NCAME 2009)
YMCA Institute of Engineering, Faridabad, Haryana, December 910, 2006. 4 6 January 2010 Department of Mechanical Engineering, SVNIT, Surat, Gujarat , India. February 28th and March 1st 2009 Department of Mechanical Engineering MIT, Moradabad. 30th 31st March 2009. Department of Mechanical Engineering, DBIT, Bangalore. 15-17 December, 2011.
27
28
Effect of Relative Surface Roughness On The Performance of Heat Transfer through Microchannels. Mohd Nadeem Khan, Mohd Islam & MM Hasan. Brief Review of Fluid Flow and Heat Transfer through Microchannels. Mohd Nadeem Khan, Mohd Islam & MM Hasan. Theoretical Investigation of Fluid Flow and Heat Transfer in Microchannels. Mohd Nadeem Khan, Mohd Islam & MM Hasan. An experimental study of flow characteristics of a symmetric Y-shaped intake diffusing duct at different cross sections. Netrapal Singh,Abdur Rahim & Mohd Islam. Energy Analysis of Combined Cycle Power Plant At NTPC Dadri. Arvind Tiwari,MM Hasan & Mohd Islam.
29
(AME09) Conference
30
38th FMFP , Conference Bhopal International Conference on Innovatio Technologies in Mechanical Engineering
31
KIET, Ghaziabad
9.
(i) Faculty selected nationally/ internationally to visit other laboratories in India and abroad. (ii) a) Fluid Mechanics & turbo Machinery Lab I.E.T. Khandary Agra University.
11
b) G.B.Pant College of Engineering & Technology (Intrumentation and Measurement Lab, New Delhi. c) Fluid Mechanics Lab in Al-falah School of Engineering & technology Faridabad (iii) Faculty serving in
a) National committees/Societies. National Committees Expert Member of UGC, AICTE, UPSC, CSIR NBA Expert Committee Member Expert Member Selection Committees of GNIT, KIET, IET,Agra M Tech Evaluator, IIT Delhi, KIET, Galgotia,IET,MNITJaipur M Tech & Ph D Examiner at NIT Kurukshetra, AMU Aligarh,Integral Univ.,Lucknow
Indian Society for Technical Education (ISTE). Indian Society for Environmental Management (ISEM). Indian Society for Applied Mechanics (ISAM).
Membersip of Socities
Indian Society for Mechanical Engineers (ISME). Indian Society for Fluid Mechanics & Fluid Power (FMFP). Indian Society for Environmental Management (ISEM).
b) Any other (please specify) Fellow member of Metrology society of India. (8). Faculty recharging strategies:
a) b) c) d) e) f)
Computational Fluid Dynamics Nov. 1991, Applied Mechanics Department, IIT Delhi. Laser Anem Ometry in Fluid Flow Applications, Feb.1991, Mechanical Engg. Department, IIT Delhi. Development of Resources in Engineering Fluid mechanics, July, 1990, Civil Engg. Department, IIT Delhi. Non-Conventional Source of Energy Jun 1991, Center for Energy Studies, IIT Delhi. Effective methods of Teaching and learning June, 1990 Applied Mechanics Department, IIT Delhi. Effective Communication in short courses, April 1991 IIT Delhi.
12
g) h) i) j) k) l) m) n) o) p) q) r) s) t) u)
Basic Experiments in Fluid Mechanics May, 1993. Applied Mechanics Department, IIT Delhi. Advance Techniques in the analysis of Fluid Flows, May 1993. Applied Mechanics Department, IIT Delhi. Workshop on Patent Awareness, Oct. 11, 2000. Jamia Millia Islamia, New Delhi. Workshop on IT for all Emerging Challenges, Nov. 9,2000 Jamia Millia Islamia, New Delhi. Seminar on Physics of Material, 31 Jan 2002, J.M.I., .New Delhi. National Conference "Management of Higher Education: 21st Century Challenges" 9th Feb 2002, J.M.I., New Delhi. Seminar on CNG, April 30, 2002, Department of Mechanical Engineering J.M.I., New Delhi. 18th National Conference on FMFP, Indore INDIA, 1997. 8th ISME Conference, New Delhi, 1993. 9th ISME Conference, University of Roorkee, 1994. 1st International Conference on FMFP, 1998, IIT Delhi. 10th ISME Conference, IIT Delhi, 1998. 27th Conference on FMFP, Palghat, Kerala, 2000. National Conference on Material and Devices, Rohil Khand University, Bareilly, 2002. National Symposium on Instrumentation (NSI 27) 27-29 Nov. 2002, Coimbatore, India
(10).
In house :
1. 2. 3.
Mr. Hemath Kumar, "Study of Friction and wear Behavior of Aluminum Based Metal Matrix Composite for Automotive Parts." He has published two papers and has send three more for publication. (Awarded) Mr. Waqar Ali " A Comparative study of factors influencing aerodynamics drag resulting fuel consumption in different models of aeroplane and automobiles. (Awarded) Mr. Mohd Nadeem Khan, Analytical and Experimental studies of Fluid Flow and Heat Transfer in Microchannels. (Awarded).
13
03
Mr. Netra Pal Singh, Some Dynamic Studies on Divided Y-Shaped Ducts Mr. Sheib A. Alhadi Faroun,Study of fluid and physico-mechanical properties of fly ash based high strength polymeric material. Mr. Arvind Kumar Tiwari,Effect of operating variables on the performance of combined gas power plant. Mr. Layth Wadhah Ismel Study the behavior of Fluid Flow in Nano pipes . Mr. Ibrahim Thamer Numerical and experimental study of performance of Vapour Compression cycle with different Geometry Microchannel Mr. Ravinder Kumar Numerical and Experimental Investigations on the characteristics of Thermo-fluid and Geometrical parameters of single phase Liquid flow in Micro-channel
(12). Seminars/ Conferences/Workshops organized and the source of funding (national / international) with details of outstanding participants, if any. S. No 1 2 Name of the conference / seminar /workshop
International conference on CAD, CAM & Automation. International conference on innovative technologies in mechanical engineering.
Remarks
14
(13). S. No 1 2 3 4 5 6
Give details of student enrichment programmes (special lectures / workshops / seminar) involving external Name of the workshop / Special Lecture / Workshop Tutorial / B E Mechanical Farewell programme. B E Mechanical Farewell programme. B.Tech farewell party B E Mechanical Farewell programme. B.Tech farewell party B E Mechanical Farewell programme. Name of the Expert Delivering Special Lecture Prof. Nawab Ali(CSIR) Sanjay Chopra(MD) Prof. Rao(Maruti Shuzki) Prof. S.N.Singh (IIT-Delhi) Dr.D.S.Khatri (MNC-Gurgaon) Dr. Imtiaz (Escort Tractor Fridabad) 2010 2012 2008 2011 2011 2012 Year Remarks
(14).
List the teaching methods adopted by the faculty for different programmes (UG/ PG/P hD.).
UG: Chalk & Duster, Lectures, Tutorials, Assignments, Discussions, Seminar, Special Lectures. PG: Chalk & Duster, White Board & Marker, Lectures, Tutorials, Assignments, Discussions, Seminar, Special Lectures. Ph.D.: White Board & Marker,Transparency & Overhead Projector, Seminars, Special Lectures, Workshops.
15
(15).Briefly highlight the contributions in generating new knowledge, basic or applied. With the help of Ph D students, M.Tech students, B.Tech students and financial support from the Department, fabricated the following Test Rig in the Departmental Laboratories and performed project work of the students
a) Microchannel Test Rig b) Flat Plate Heat Exchanger Test Rig. c) Pressure Calibration Rig. d) Hydraulic Bench for Basic Experiments.
(16).Future plans for the Development of the Department. a) Research in Fluid Mechanics, Heat Transfer, Mecatronics and micro-channel. b) M.Tech in Technology Management . c) M.Tech in Energy Management.
16