Professional Documents
Culture Documents
PHILIPS 6020 / 6050 / 6080
Reset pamici faxu:
- Przy wczonym urzdzeniu naciskamy na klawiaturze urzdzenia (strzak w d, *, #)
- z menu wybieramy: SOS1
- 1 pozycja, gdzie miga kursor zmieniamy na 1
- zatwierdzmy OK
- naciskamy C (wyjcie do gwnego menu)
- naciskamy (strzak w d, #, 8)
Brother HL-2270, toner TN-2220 rest tonera i bebna DR-2200
RESET tonera
Nacisnij przycisk GO siedem razy
wszystkie diody zamigaj dwa razy
maszyna przejdzie w tryb Continue printing i powinna drukowac
http://www.aztrade.pl
Powered by Joomla!
RESET bbna
po wlozeniu tonera wraz z bebnem
przy otwartej pokrywie
nacinij i przytrzymaj GO przez 4 sekundy, az wszystkie diody sie zaswieca, gdy wszystkie si zaswieca,
puszczamy przycisk GO, zamykamy pokrywe
DCP-7055 reset bbna
Put the new drum unit and toner cartridge assembly in the machine.
Press Clear to reset the drum counter before closing the front cover.
For models with FAX functions:
To confirm you are installing a new drum unit, press 1.
For models without FAX functions:
To confirm you are installing a new drum unit, press the Up Arrow Key.
When the LCD shows Accepted, close the front cover.
Reset tonera w Brother DCP - 7055 , 7057 , 7060 , 7065 , 7070
http://www.aztrade.pl
Powered by Joomla!
http://www.aztrade.pl
Powered by Joomla!
Aby zresetowa bben DR-3100
w Brother 8460 / 8860 naley:
- Przy wczonym urzdzeniu.
- Otworzy przednia klap
- Wycign bben z tonerem
- Woy z powrotem, ale nie zamykajc klapy
- nacisn przycisk Clear/Back
- na wywietlaczu pojawi si napis: Replace Drum?"
- wybieramy Yes
http://www.aztrade.pl
Powered by Joomla!
Brother DCP-7030 drum reset
Zamontuj nowy zesp bbna i wkadu tonera do urzdzenia.
Nacinij Clear/Back (Wyczy/Cofnij).
Dla urzdze MFC:
Aby potwierdzi instalacj nowego bbna, wcinij 1.
Dla urzdze DCP:
Aby potwierdzi instalacj nowego bbna, wcinij strzak Up (Gra).
Gdy wywietlacz LCD pokae AKCEPTACJA, zamknij pokryw przedni.
http://www.aztrade.pl
Powered by Joomla!
Drum reset brother 7010
Opis ze strony firmy BROTHER
Dlaczego komunikat "CHANGE DRUM " w dalszym cigu pojawiaj si na wywietlaczu LCD mojej
maszyny Brother, po tym jak otrzymuje nowy bben?
Opis
Ten komunikat bdzie nadal wywietlany, jeeli licznik bbna nie bdzie zresetowany. Aby wyzerowa
licznik bbna, postpuj zgodnie z instrukcjami poniej.
1. Otwrz przedni pokryw.
2. Nacinij (przytrzymaj) klawisz Opcje na panelu sterowania.
Na wywietlaczu pojawi si "REPLACE DRUM - 1.YES 2.NO".
3. Nacinij 1, aby zresetowa bben.
4. Zamknij przedni pokryw.
http://www.aztrade.pl
Powered by Joomla!
Brother MFC-7840, reset bbna DR-2100
- Make sure that the machine is turned on.
- Open the front cover.
Powered by Joomla!
Brother HL 2140 reset drum
if it's a drum life error then you either need to replace it and/or reset the counter.
to reset the drum counter, open the fron cover, hold down the start button until all lights lit up. then
release the button and shut the front cover.
Brother MFC-9840 MFC-9440 Toner Reset (TN-135)
1. With power on, open the toner access main door. You will get a “Cover is Open”
message on the LCD.
2. Press the “Clear/Back” button and you will be taken to the toner “Reset
Menu”
http://www.aztrade.pl
Powered by Joomla!
3. You can then scroll through the reset options for the printer’s toner cartridges:
1. B.TNR-S – Black toner small cartridge (TN-110)
2. B.TNR-H – Black toner high-capacity cartridge (TN-115)
3. C.TNR-S – Cyan toner small cartridge (TN-110)
4. C.TNR-H – Cyan toner high-capacity cartridge (TN-115)
5. M.TNR-S – Magenta toner small cartridge (TN-110)
6. M.TNR-H – Magenta toner high-capacity cartridge (TN-115)
7. Y.TNR-S – Yellow toner small cartridge (TN-110)
8. Y.TNR-H – Yellow toner high-capacity cartridge (TN-115)
4. Select the cartridge size you have and the colour you want to reset, and press OK. Since I had small
cartridges, I used the S options for all three colours.
5. Each cartridge must be reset individually. Press "1" to reset.
6. Press “Clear/Back” to get out of the menu, then close the door.
Lexmark X203 / X204 Drum reset procedure
Open printer door.
Press and hold ‘STOP” for three seconds.
‘RESETING PC COUNTER” appears on the LCD.
Close the printer door.
Counter is now reset.
Brother HL-2130 Toner reset /TN-2010/
1. Open the front cover and leave open while completing the following steps.
http://www.aztrade.pl
Powered by Joomla!
2. Turn the printer off.
3. Hold the 'go' button while turning the printer on. All panel lights should be on.
4. Release the 'go' button.
5. Press the 'go' button 2 times.
6. Pause.
7. Press the 'go' button 5 times.
8. The toner light should be off.
9. The paper light should be on or flashing.
10. Close cover. The ready light should be the only light on.
Brother HL-2135W Toner Reset
1)
2)
3)
4)
5)
6)
7)
Brother MFC-7340 / 7345 / 7440 / 7840
Reset bbna
1. open the front door (where you access the toner)
2. press the Clear/Back button. You will be shown a dialogue "REPLACE DRUM? 1.Yes 2.No
http://www.aztrade.pl
Powered by Joomla!
2. type 1.
*
With power on and front cover open press set, then select reset drum
*
Must open front door and press set button then arrow to replace drum and yes, press set/ok.
Reset tonera "TONER END LIFE"
- Open
- Press
- Press
- Press
*
1.
2.
3.
4.
door
Clear/Back key
*00
OK .
Brother HL-2140 / 2150 / 2170
Wymieniajc zesp bbna naley wyzerowa licznik bbna w nastpujcy sposb:
Upewnij si, e drukarka jest wczona a dioda LED Drum miga.
- Otwrz przedni pokryw.
- Nacinij i przytrzymaj przycisk Go przez okoo 4 sekundy, a wszystkie diody LED zawiec si, zwolnij
przycisk Go.
- Zamknij przedni pokryw.
http://www.aztrade.pl
Powered by Joomla!
- Upewnij si, e diod LED Drum zgasa.
Brother DCP-7040 reset bbna
To clear error messages, you need to reset the drum counter as instructed below.
Make sure that the machine is turned on.
- Open the front cover.
- Press Clear or Clear/Back on the control panel.
Powered by Joomla!
Brother HL-2035 rest bbna
- Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover of the
printer.
- Reset the drum counter. Press and hold down the Go button for about 4 seconds until all the LEDs light
up. Once all four LEDs are lit, release the Go button.
Linki do strony firmy BROTHER z informacjami o resecie bbnw w poszczeglnych modelach:
DR2125 (HL-2140) – Drum Reset
DR2125 (DCP-7040) – Drum Reset
http://www.aztrade.pl
Powered by Joomla!
http://www.aztrade.pl
Powered by Joomla!
http://www.aztrade.pl
Powered by Joomla!