You are on page 1of 61

Power Plant T-Power

Noise Acceptance Test


for the Far Field

March/April/May/June/July/August 2011
Final report v3: With correct measurements during
Start up the night from 13th till the14th June 2011
Comments meeting 19/07/2011 and
Background measurements in BP13

Principal :
Siemens NV Energy
Demeurslaan 132
B-1654 Huizingen, Belgium

Report number: 11.0029-1-v6

Date : 25 September 2011

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Report executed by
SGS Belgium NV
Haven 407
Polderdijkweg 16
2030 Antwerp
Tel. 03/545.87.50

AND DESCRIBES
An acoustical study of the far field noise levels around the site of T-Power Tessenderlo.
This study has been carried out according to the procedures of our Quality System.
The employees of the acoustical department of SGS Belgium NV are accredited as experts in noise and
vibrations, according to a Walloon, Brussels and Flemish decree, to perform acoustical studies, deduct
and accompany noise sanitation plans concerning environmental noise but also concerning the
protection against noise at work.
SGS Belgium NV is a notified body for the determination and assessment of sound power levels of
machinery, according to Annex 5, 6 en 7 of the European Directive 2000/14/EC. SGS Belgium NV
performs these activities according to a quality system, that is based upon ISO 17025 and EN 45004.
This quality system is accredited to BELTEST.
Co-operators of SGS
Bert De Winter
Acknowledged expert noise and vibration (Flanders environmental legislation)
Project leader and author

Jerome Gevaert
Acknowledged expert noise and vibration (Flanders environmental legislation)

Thomas Redant
Acknowledged expert noise and vibration

Contact of Siemens
Mr. Holger Ennes, Noise Expert at Siemens AG Energy- EN32 Acoustics
This report may only be reproduced in its entirety. Only and only the original signed report is
binding
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

2/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table of contents
1

INTRODUCTION .................................................................................................. 5

REFERENCE DOCUMENTS................................................................................ 5

MEASUREMENT EQUIPMENT ........................................................................... 6

APPLICABLE LEGISLATION .............................................................................. 7

4.1

Environmental noise in Flanders concerning the far field levels - General

4.2

Immission points used to evaluate the specific noise of the T-Power Plant

MEASUREMENTS IN THE FAR FIELD ............................................................. 10


5.1

Regimes of the T-Power Plant to consider

10

5.2

Specific noise by immission measurements at the evaluation points

10

5.3

Noise emission measurements

12

5.4

The noise calculation model

13

5.5

Calculated specific noise and comparison with immission values

14

5.6

Evaluation specific noise of maximum Base Load to limit values for stable noise

16

5.7

Evaluation specific noise Full Bypass (with 100% GT load) to limit values for incidental noise
18

5.8

Evaluation specific noise of Start Up operation to limit values for stable noise

18

CONCLUSIONS ................................................................................................. 20

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

3/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table 4.1: Noise guide values from Appendix 4.5.4 of Vlarem II ........................................................ 8
Table 4.2: Summarize of the limit values during the night period ................................................... 10
Table 5.1: Measured LA95,5min. levels at evaluation points ............................................................... 11
Table 5.2: Calculated specific noise at evaluation points based on spectral Leq-levels ............... 12
Table 5.3: Sound power levels of relevant noise sources during maximum base load and Full
bypass conditions ......................................................................................................................... 13
Table 5.4: Calculated specific noise Base Load and comparison with indicative LAsp immission14
Table 5.5: Calculated specific noise Full Bypass and comparison with indicative LAsp immission
......................................................................................................................................................... 15
Table 5.6: Calculated specific noise Start Up (40% GT Load) and comparison with indicative LAsp
immission....................................................................................................................................... 15
Table 5.7: Specific noise during max. Base Load, during Full bypass (with 100% GT load) and
during simulated Start Up (with 40% GT load) ........................................................................... 16
Table 5.8: Comparison calculated specific noise of maximum base load to the noise limits ...... 17
Table 5.9: Comparison calculated incidental specific noise of Full Bypass condition (with 100%
GT load) to the night noise limits for incidental noises ............................................................ 18
Table 5.10: Comparison calculated specific noise of simulated start up to the noise limits........ 19
Figure 4.1: Position evaluation points .................................................................................................. 9
Figure 6.1: Position evaluation points on land use map (source AGIV GIS Vlaanderen))........... 21
Figure 6.2: Position measuring and evaluation points 2011 on aerial photograph (source Google
Earth) .............................................................................................................................................. 22
Figure 6.3: Position noise sources 2011 in acoustical model IMMI................................................. 24
Figure 6.4: Measurement positions Strber method......................................................................... 25

Annex 1: Figures ................................................................................................................................... 21


Annex 2: Working regimes during measurements ............................................................................ 26
Annex 3: Overview 1/3 octaves measurements ................................................................................. 29
Annex 4: Calculated indicative specific noise at evaluation points based on spectral Leq-levels 33
Annex 5: Calibration certificates noise measurement equipment ................................................... 36
Annex 6: Overview Weather conditions during far field measurements......................................... 40
Annex 7: Calculation LwA according ISO 3746 based on Leq-soundpressure levels near sources
......................................................................................................................................................... 46
Annex 8: Calculation LwA according ISO 8297 based on Leq-soundpressure levels at plant
boundary ........................................................................................................................................ 47
Annex 9: Background measurements in BP13 .................................................................................. 59

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

4/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

1 INTRODUCTION
The purpose of this document is to assess the noise emitted by the installations of the CCGT Power
Plant of T-Power at Fabriekstraat Tessenderlo.
The stable specific noise in the far field has to fulfill at the night noise limit of 50 dB(A) at 200m of the
border of the Plant in the Industrial area, 45 dB(A) at 200m of the border of the Plant in the Buffer area
and 40 dB(A) at the nearest house outside the industrial area and at 200m from the industrial area in
the direction of the other nearest houses.
The specific noise will be measured in these immission points by measuring the background, the
immission at maximum base load, the immission during full bypass conditions (with 100% gas turbine
load) and during simulated start up conditions (bypass with 40% gas turbine load).
In case there is a too small difference between the signal and the background noise (< 3 dB(A)),
additional measurements at 7m height will be performed at the surrounding border of the site (Strber
method, ISO 8297) for calculating the noise emission in the horizontal plane (and this by maximal Base
Load, Full Bypass operation, Simulated Start Up and background noise). The noise emission of the high
placed noise sources (Stack and Outlet of cooling towers) will be measured separately (according to
ISO 3746) and this also for max. Base Load, Full Bypass operation (100% GT Load) and Simulated
Start Up (40% GT Load). The noise immissions in the evaluation points will be calculated according ISO
9613.
The noise study takes into account measurements executed on and around site during April, May and
June and August 2011.

2 REFERENCE DOCUMENTS
Studies:
o E.I.A. report Chapter 9 Noise and Vibrations - SGS Belgium: project number 05.0411 - 2005.
o Section 3.3.1: Environmental and Nature Permit, Reference 023.0, 10/V2007N032518 file
750.71/A/07.103
Specifications
o Siemens Noise Acceptance Test Procedure with ref. ES EN32/10/207 - Part Far Field Sound
levels and measurements
o Contract Document, Schedule 9: Table 2:Site noise levels
Legislation
o Vlarem II: Flemish Environmental Legislation
Standards, codes and regulations
o DIN EN 61672-1, October 2003 Electro-acoustics, Sound Level Meters-Part1: Specifications)
o DIN EN 61672-2, August 2004 Electro-acoustics, Sound Level Meters-Part2: Pattern Evaluation
Tests)
o DIN EN 61043, May 1994 (IEC 1043:1993) Electro-acoustics, Instruments for the measurement
of sound intensity
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

5/61

Noise acceptance test Far Field T-Power Tessenderlo

o
o
o
o
o
o
o
o

o
o
o

Siemens NV Energy

ISO 1996/1, September 1982 Acoustics - Description and measurement of environmental noise
Part 1: Basic quantities and procedures
ISO 1996/2, April 1987 Acoustics - Description and measurement of environmental noise Part
2: Acquisition of data pertinent to land use
ISO 1996/3, December 1987 Acoustics - Description and measurement of environmental noise
Part 3: Application to noise limits
ISO 3744, 1994 Acoustics - Determination of sound power levels of noise sources - Engineering
method in an essentially free field over a reflecting plane
ISO 3746, 1995 Acoustics - Determination of sound power levels of noise sources using sound
pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 8297, 1994 Acoustics Determination of sound power levels of multisource industrial
plants for evaluation of sound pressure levels in the environment Engineering method
ISO 9613-2, December 1996 Acoustics - Attenuation of sound during propagation outdoors Part
2: general method of calculation
ISO 11200, 1995; DIN EN ISO 11200, July 1996 Acoustics - Noise emitted by machinery and
equipment - Guidelines for the use of basic standards for the determination of emission sound
pressure levels at a work station and at other specified positions.
ISO 11201, 1995; DIN EN ISO 11201, July 1996 Acoustics - Noise emitted by machinery and
equipment Measurement of emission sound pressure levels at a work station and at other
specified positions. Engineering method in an essentially free field over a reflecting plane
ISO 11202, 1995; DIN EN ISO 11202, July 1996 Acoustics - Noise emitted by machinery and
equipment - Measurement of emission sound pressure levels at a work station and at other
specified positions. Survey method in situ.
ISO 11203, 1995; DIN EN ISO 11203, July 1996 Acoustics - Noise emitted by machinery and
equipment Determination of emission sound pressure levels at a work station and at other
specified positions from the sound power level.
ISO 11204, 1995; DIN EN ISO 11204, July 1996 Acoustics - Noise emitted by machinery and
equipment - Measurement of emission sound pressure levels at a work station and at other
specified positions. Method requiring environmental corrections.
Dutch guideline Handreiking Meten en Rekenen Industrielawaai, 1999 for measuring and
evaluation industrial noise.
Immi 2010-2 Noise Prediction / Noise Mapping Software - Wlfel Mesysteme Software
Google Earth

3 MEASUREMENT EQUIPMENT
Sound pressure levels:
Larson-Davis real-time analyzer type 824 (LD10 with serial number 1628)
GRAS microphone and pre-amp type 26AK
Larson-Davis calibration source type CA250 (CAL1 with serial number 2198)
Larson-Davis software
Distance measurement device:
Bushnell Laser Yardage Pro Tour, range-finder
Leica IR odometer
The sound pressure meter is according to the IEC 651 type 1 standard and the IEC 804 type 1 standard
for integrating soundlevelmeters. The accuracy for the 63 Hz octave is 1.5 dB, for the octave bands
from 125-4000 Hz 1dB and for the 8000 Hz octave +2 till -4 dB.
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

6/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Before and after each measurement test, the measuring instruments are individually calibrated with a
Larson-Davis calibrator type CA250. Calibration certificates of sound level meter LD10 and calibrator
CAL1 are given in Annex 5.
De long distance odometer Bushnell has an accuracy of 1m, the Leica IR odometer an accuracy of
10mm.

4 APPLICABLE LEGISLATION
4.1

Environmental noise in Flanders concerning the far field levels - General

An important distinction that needs to be taken into account in the Flemish environmental law
concerning the noise is the difference between existing establishments (existing installation) and new
establishments (new installations).
Briefly explained, an existing establishment is defined as an establishment that on 01.01.1993 (coming
into force of the original Vlarem II) was licensed or for which before 01.09.1991 (coming into force of
Vlarem I) a license application had been submitted. New establishments are establishments that on
01.01.1993 were not yet in operation and with extension establishments that were in operation on
this date, but for which a license was not applied for or notification provided on time.
The type of establishment determines to which standards the measured/calculated values need to be
assayed. Environmental quality standards are standards established by the Flemish Government that
determine which quality requirements the parts of the environment must meet within the periods set by
the government. These standards can be established in the form of limit values and guide values. Limit
values may in principle not be exceeded and are applied to new establishments. Guide values are
comparable with limit values, but their binding nature is less great. These values are applied to existing
establishments.
The specific noise produced by the industrial site are assessed to the guide values (see table below) or
limit values depending on the type of establishment (new or existing). As explained above, the limit
values are stricter and depend on the one hand on the area in which the assessment point lies and on
the other hand on the LA95 value of the sound that existed before the new installations were functioning
(=original sound in the surroundings). If the original sound pressure level around the industrial site is not
known, the limit value (= guide value for new installations) is obtained by reducing the guide values of
existing installations (Table 4.1) with 5 dB(A) according to the decision diagram in appendix 4.5.6 of
Vlarem II.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

7/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table 4.1: Noise guide values from Appendix 4.5.4 of Vlarem II

Day
(7 19 h)
1 rural areas and areas for stay recreation
2 areas or parts of areas located at less than 500
meters of industrial areas not mentioned under 3 , or
of areas for community supplies and public utilities
supplies
3 areas or parts of areas located on less than 500
meters of areas for old-fashioned companies and small
and medium ventures, of service areas or of grubbing
areas during grubbing
4 living areas
5 industrial areas, service areas, areas for community
supplies and public utilities supplies and grubbing
areas during grubbing
5bis agriculture areas
6 recreation areas, except for areas for stay
recreation
7 all other areas, excluded: buffer areas, military fields
and these for which are laid down specific standards in
particular decisions
8 buffer area
9 areas or parts of areas on less than 500 meters of
for gravel extraction intended grubbing areas during
grubbing

Assessment period
Evening
Night
(19 22 h)
(22 7 h)

40
50

35
45

30
45

50

45

40

45
60

40
55

35
55

40
50

35
45

35
40

45

40

35

55
55

50
50

50
45

Note : if an area falls under two or more points of the table, then in that area the highest standard value applies

The important areas and assessment period for the Power Plant is indicated in grey color. Remarque
that these are the guide values (for existing installations), the guide values for new installations (= limit
values) could be 5 dB(A) lower, depending on the original background noise.
The limit value during night period for incidental noises (noises which occur less than 10% of the
evaluation period), f.e. Full Bypass condition with 100% gas turbine load or Hot Start Up is 5 dB(A)
higher than the above mentioned guide values and so 10 dB(A) higher than the limit values for stable
noises.

4.2

Immission points used to evaluate the specific noise of the T-Power Plant

The position of the evaluation point on the land use map is shown in Figure 6.1 in Annex 1 and in Figure
4.1.

BP 3 and BP7 till BP10 are situated at 200m from the site border in industrial area so the guide
value of 55 dB(A) has to be applied. Because no long term original background measurements
are available, the limit value for stable noises of 50 dB(A) during night period has to be applied.
BP 4 till BP6 are situated at 200m from the site border in buffer area so the guide value of 50
dB(A) has to be applied. Because no long term original background measurements are
available, the limit value for stable noises of 45 dB(A) during night period has to be applied.
BP11 is the immission point at 200m from the industrial area in the direction of the nearest
group of houses (so area 2 of Table 4.1), the guide value of 45 dB(A) has to be applied. Since

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

8/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

the original background level is 44.1 dB(A) (see Table 5.1), so lower than 45 dB(A), the most
severe limit value of 40 dB(A) shall be taken.
BP 13 is the immission point at the nearest house, in agriculture area at less than 500m from
the industrial area (so area 2 of Table 4.1), the guide value of 45 dB(A) has to be applied. Since
the original background level is 44.9 dB(A) (see Annex 9), so lower than 45 dB(A), The specific
noise of the new installations has to fulfill at the limit value of 40 dB(A).

Figure 4.1: Position evaluation points

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

9/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table 4.2: Summarize of the limit values during the night period
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

Limit value - stable noises


dB(A)
50
45
45
45
50
50
50
50
40
40

Limit value - incidental noises


dB(A)
60
55
55
55
60
60
60
60
50
50

5 MEASUREMENTS IN THE FAR FIELD


5.1

Regimes of the T-Power Plant to consider

The specific noise of following conditions has to be considered:


normal operating conditions from minimum to maximum load (max. base load),
included start up operation and shut down operation.
The specific noise of following conditions (abnormal transients) has not to be considered:
safety valve operation,
island operation with steam bypass,
commissioning phase and temporary test operating conditions,
emergency conditions (e.g. diesel generator operation),
noise generated by sources supplied by others.
More details about the working regimes during the far field measurements are given in Annex 2.
Because the power plant can work during the night period, immission measurements and evaluation will
be executed at 1.5 m for the 200m points (no houses) and at 4 m height for BP11 and B13 (average
height of sleeping rooms).
Important remark is that a hot start up probable will take 10 till 30 minutes. So during day- and nighttime
this can be considered as an incidental noise because less than 10% of the evaluation period occurring
(according Vlarem II). During evening this 10% means 18 minutes (10% of 3 hours period from 19.00 till
22.00 hour) so it depends really on the effective working time if it is to consider as an incidental or a
stable noise. For the moment the Start Up (steam bypass and 40% GT load) will be considered as a
stable source (so to evaluate at the more severe limit values for stable noises).

5.2

Specific noise by immission measurements at the evaluation points

To avoid noise disturbance off the traffic, all far field measurements were executed during the night
period.
The background measurements were executed the night from 12 till 13 April 2011 from 23.11 till
03.58 hour, with wind from W to SW and with average speed around 1.5 m/s.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

10/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

The measurements with maximum base load operation were executed the night from 28 till 29
May 2011 from 23.34 till 01.45 hour, with wind from the SW direction and with wind speed of 3
m/s.
The measurements during full bypass conditions (with steam turbine in bypass operation and
100% GT load) were executed the night from 27 till 28 May 2011 from 01.02 till 03.18 hour, with
wind from the SW direction and with wind speed of 1 m/s. The purpose was to measure during
simulated start up conditions. With the 100% GT load, the working regime could not be
considered as a representative start up condition but more a worst case incidental working
regime (only for 5 minutes).
The measurements during simulated start up conditions (with steam turbine in bypass operation
and 40% GT load) were executed the night from 13 till 14 June 2011 from 21.30 till 03.00 hour,
with wind from the S till SW direction and with wind speed of 1 till 1.5 m/s (measured at 8 m
height).

More details about the weather conditions during the immission measurements are given in Annex 6.
All spectral details (in 1/3 octaves) about the measuring results at evaluation points (and other
measurements) are given in Annex 4.
Because the noise off a Power Plant is a very stable noise the LA95,5min.-level can be used to characterize
the specific noise of the plant. In the table underneath a summary of the LA95,5min-levels.
Table 5.1: Measured LA95,5min. levels at evaluation points
BP
Background

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

dB(A)
52.8
46.8
46.2
46
46.1
47.5
46.1
52.8
44.1
46.7

Condition
Max
Full
Base
bypass
load
with 100%
GT load
dB(A)
dB(A)
51
52.9
47
49.9
45.4
47.9
45.4
47.1
46
47.3
47.6
53
45.5
50
50.5
51.9
43.8
45.4
45.1
46.6

Simulated
start up
(40% GT
load)
54.1
47.5
46.1
46.4
46.9
51.6
47.9
52.2
44.4
46.2

LAsp (Signal Background)


Max Base load
Full
Simulated
bypass
start up
with 100%
(40% GT
GT load
load)
dB(A)
dB(A)
/*
36.5 **
48.2 **
33.5 **
47.0
39.2 **
/*
43.0 **
/*
/*
40.6 **
35.8 **
/*
41.1 **
39.2 **
31.2**
51.6
49.5
/*
47.7
43.2 **
/*
/*
/*
/*
39.5 **
32.6 **
/*
/*
/*

(*)
Because background levels were higher than the signal levels, the specific noise could
not be calculated with immission measurements at the evaluation points. The background noise
is probably to much influenced by the changing stable noise sources from the neighboring
factories and/or the slightly different wind speed during the background measurements (13 April
2011) with regard to the measurements with maximum base load (29 May 2011) and with full
bypass at 100% GT-load (28 May 2011).
(**)
In these points there was a higher signal level than the background level. But the signal
to noise ratio was lower than 3 dB, so the interval of confidence on this calculated specific noise
is too big and the specific level is only an estimation.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

11/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

The specific noise at these evaluation points during the considered working regimes shall be calculated
by noise emission measurements (according ISO 3746 and ISO 8297) and sound propagation
calculations (according ISO 9613).
The calculated specific noise at the evaluation points, based on spectral Leq-levels, is given in the table
underneath. Fore these calculations we made the assumption that fore those spectral levels where the
background level was higher than the foreground level, the specific linear level at the considered 1/3
octave shall be at least 7 dB lower than the measured signal level. The assumption of -7 dB is not
according ISO standards but according code for good practice for situations with high background levels
(according the Dutch guideline for measuring and evaluation industrial noise Handreiking meten en
rekenen industrielawaai). The calculations are given in Annex 4.
Table 5.2: Calculated specific noise at evaluation points based on spectral Leq-levels
BP

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

5.3

Max Base
load
dB(A)
47.3
43.2
43.1
42.3
42.9
45.3
43.0
45.8
38.7
40.1

LAsp (Signal Background)


Full bypass with Start Up with
100% GT load
40% GT load
dB(A)
dB(A)
47.9
49.3
48.3
43.7
45.5
44.1
43.4
43.5
44.0
44.0
53.5
51.5
49.6
45.2
46.8
46.5
41.7
40.0
41.3
40.8

Noise emission measurements

For measuring the sound power level of the noise sources at ground level and the sound radiation from
faades (relevant noise sources in the horizontal plane), the Strber method (according ISO 8297) is
used. Therefore measurements at 7 m height at the plant boundary were executed during standstill
(background measurements), during maximum base load, during steam turbine full bypass operation
(with 100% GT load) and during simulated start up (steam turbine bypass operation with 40% GT load).
Because of the possible fluctuating humming at 50 Hz from the boiler (the rest off the noise sources of
the power plant produces a very stable noise), the LAeq,1.min.-levels were used to characterize the specific
noise of the power plant at the plant boundary. In Annex 3, a summary of the spectral Leq-levels,
measured at the plant boundary (positions a till q) is given for the several working regimes. The
locations of these measuring points are given in Figure 6.4. in Annex 1.
Based on the 1/3-octave Leq,1min.-sound pressure levels at the plant boundary, a calculation of the sound
power level (LwA according to ISO 8297) has been done. The detailed calculations are inserted in
Annex 8.
Remarks:
At positions e, f and g there was during background measurements a local influence of a drying
fan. The background levels in these positions are the measured levels of the two neighboring
positions during background measurements (so position d and h). This to avoid underestimation
of the specific level during maximum base load, full bypass conditions or simulated start up.
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

12/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

At maximum base load the difference between the highest level in position p (65.9 dB(A)) and
lowest level in position j (55.8 dB(A)) is > 10 dB(A). This difference is due to the contribution of
western air intake of the cooling towers (of which the sound power level is measured
separately), thats why step 2 and step 3 of the Strber method can be justified. With full bypass
operation the difference between the highest level in position h (67.8 dB(A)) and lowest level in
position n (59.6 dB(A)) is < 10 dB(A). With simulated start up operation the difference between
the highest level in position h (65.1 dB(A)) and the lowest level in position n (57.5 dB(A)) is < 10
dB(A), so OK to use the Strber-method.
All calculations were performed with 1/3-octave Leq,1min.-levels. Because of the changing
influence of the stable noise sources of the neighboring factory (or changing meteo conditions),
a very few spectral signal levels (at max. base load, during full bypass (at 100%GT load) or
simulated start up (at 40%GT load)) were lower than the corresponding background levels.
According code of good practice handreiking meten en rekenen industrielawaai, for these 1/3octaves, a level of the signal level minus 7 dB is assumed.

With the Strber method the noise emission in the horizontal plane is covered. We can assume that the
sound power level of the stack was not included in the calculated LwA with the Stber method.
Therefore additional sound power measurements according ISO 3746 at following sources were
performed:
Stack of UHA;
Exhaust of 3 cooling towers (with mean of 3 measured exhausts as representative for all 8 CT);
Air intake of the east side of 8 cooling towers (as representative for both sides).
A summarize of the global noise emissions (LwA) is given in the table underneath. The spectral 1/3
octave values are given in Annex 7 and Annex 8.
Table 5.3: Sound power levels of relevant noise sources during maximum base load and Full
bypass conditions
IMMI name/nr.

Description

Exhaust Stack

Sound radiation through opening stack during


max. load
CT Exhaust
Sound radiation of exhaust of 8 cooling towers
CT Air Intake
Sound radiation of air intakes (both sides) of 8
cooling towers
PowerStation
Sound radiation of UMC+UHA+UMX+ULA+UBF
Sum of all sources

5.4

Base
Load
dB(A)
87.4

LwA
Full
bypass
dB(A)
87.7

Start
Up
dB(A)
74.9

97.6
91.8

98.0
92.0

98.9
93.8

108.7
109.1

111.7
111.9

110.3
110.7

The noise calculation model

The specific noise of the power plant is calculated with a three-dimensional acoustical model program
IMMI 6.3 (the one also used for the EIA). The program Immi is efficient for acoustical modeling in open
air. All calculations were executed according to ISO 9613.
The model contains following parameters:
Information about the terrain such as height, distances,
All geometric elements with there own acoustical parameters. A brick wall has another reflection
coefficient than for instance a dike of soil.
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

13/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Each source has its own sound power level (spectrum in 1/3-octaves) and directivity.
The number of reflections is adjusted to 2.

Furthermore according to ISO 9613 the Immi noise calculation model pays attention to:
Geometric extension reduces in function of the distance.
Atmospheric reduction in function of the air temperature (10C) and air humidity (relative
humidity 70%).
Reflection of an acoustical wave on a reflecting surface. The reflection depends on the wave
length and the dimensions of the reflecting surface.
Between each source and evaluation point the ground effect will be calculated in 1/3-octave
bands.
The absorption of acoustical energy by a soft surface (depends on the frequency).
Downwind (direction source receiver) is assumed.
The immission height is 4m for BP11 and BP13 and 1.5m for all other evaluation points. The source
positions are shown in Figure 6.3 in Annex 1.
The source height is 60 m for the stack, from 7 m (east side) till 30 m (west side = boiler) as the height
of the power plant sources UMC+UHA+UMX+ULA+UBF (so the same as the measuring height with the
Strber method at the east side and 30m from the west side according the Remarque from T-power, at
meeting 19/07/2011, to avoid screening by CT for the noise from Boiler), 4.5 m for the air intake of the
cooling towers (and divided in a east- and west side with possible screening effect of the cooling tower
itself (CT height 10m), according Remarque from T-power at meeting 19/07/2011) and 14.4m for the
exhaust sides of the 8 cooling towers.

5.5

Calculated specific noise and comparison with immission values

With the measured and calculated noise emission and the noise propagation model (with input
according chapter 5.4), the specific immissions can be calculated.
In the 3 tables underneath the calculated specific noise (based on emission measurements and sound
propagation calculations) is compared with the specific noise (based on measured spectral immissions
in Table 5.2).
Table 5.4: Calculated specific noise Base Load and comparison with indicative LAsp immission
LAsp model
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

dB(A)
47.1
45.5
44.1
44.2
44.1
45.3
45.6
44.7
41.7
40.2

LAsp indicative (Table 5.2)


spectral immissions
dB(A)
47.3
43.2
43.1
42.3
42.9
45.3
43
45.8
38.7
40.1

SGS Belgium NV
Reportnumber : 11.0029-1-v6

difference
dB(A)
0.2
-2.3
-1.0
-1.9
-1.2
0.0
-2.6
1.1
-3.0
-0.1

25/09/2011
final report version 3

14/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

During maximum base load conditions there is a good correlation to BP3, BP5, BP6, BP7, BP8, BP10
and BP13. In general the calculated specific levels of maximum base load with emission measurements
are higher than the calculated specific levels with spectral immission measurements.
Table 5.5: Calculated specific noise Full Bypass and comparison with indicative LAsp immission
LAsp model
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

dB(A)
50.1
48.3
46.7
47.1
47
48.2
48.5
47.6
43.9
42.5

LAsp indicative (Table 5.2)


spectral immissions
dB(A)
47.9
48.3
45.5
43.4
44
53.5
49.6
46.8
41.7
41.3

difference
dB(A)
-2.2
0.0
-1.2
-3.7
-3.0
5.3
1.1
-0.8
-2.2
-1.2

During Full Bypass (at 100% GT Load) there is a good correlation to BP4, BP5, BP9, BP10 and BP13.
In general the calculated specific levels of Full Bypass with emission measurements are higher than the
calculated specific levels with spectral immission measurements, except to the southern evaluation
points BP 8 and BP9.
Table 5.6: Calculated specific noise Start Up (40% GT Load) and comparison with indicative LAsp
immission

LAsp model
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

dB(A)
48.3
46.5
45.1
45.7
45.6
46.4
46.7
45.8
42.4
40.8

LAsp indicative (Table 5.2)


spectral immissions
dB(A)
49.3
43.7
44.1
43.5
44
51.5
45.2
46.5
40
40.8

difference
dB(A)
1.0
-2.8
-1.0
-2.2
-1.6
5.1
-1.5
0.7
-2.4
0.0

During simulated start up (at 40% GT Load) there is a good correlation to BP3, BP5, BP7, BP9, BP10
and BP13. In general the calculated specific levels during simulated start up with emission
measurements are higher than the calculated specific levels with spectral immission measurements.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

15/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Based on the auditive observations during the measurements:


clear screening effect by the cooling towers of the lower noises (UBH, ULA, lower parts of UMC
and UHA) to the eastern evaluation points BP5, BP6, BP7 and BP11,
clear mayor sound radiation by the 2 long sides of the boiler UHA and its influence to the lateral
evaluation points BP3, BP8 and BP9,
and the overestimation of the noise emission of the power plant (measured with the strber method)
partly influenced by the noise emission of the cooling towers, we can assume that the calculated
specific noise (with emission measurements and sound propagation calculations) to BP4, BP5, BP6,
BP7 and BP11 is an overestimation of the reality and the calculated specific noise, based on the
spectral immission measurements, is a better approximation of the reality to these points. To BP3, BP8,
BP9 and BP10 the calculated specific noise (with emission measurements and sound propagation
calculations) is a good approximation of the reality.
Considering the above remarks, underneath the summarize of the specific noise during maximum base
load (420 MW), during full bypass conditions (100% GT load) and during simulated start up (bypass with
40% GT load).
Considering the differences in Table 5.4, Table 5.5 and Table 5.6, and the specifications according ISO
9613-2, an interval of confidence of 3 dB can be applied to the calculated specific levels.
Table 5.7: Specific noise during max. Base Load, during Full bypass (with 100% GT load) and
during simulated Start Up (with 40% GT load)

BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

LAsp Max. Base Load


dB(A)
47.1
43.2
43.1
42.3
42.9
45.3
45.6
44.7
38.7
40.1

LAsp Full Bypass at 100%


GT load
dB(A)
50.1
48.3
45.5
43.4
44
48.2
48.5
47.6
41.7
41.3

LAsp Start Up at 40%


GT load
dB(A)
48.3
43.7
44.1
43.5
44
46.4
46.7
45.8
40
40.8

Interval of confidence: 3 dB(A)

5.6

Evaluation specific noise of maximum Base Load to limit values for stable
noise

In the table underneath the specific noise (enforced with tonal correction if applicable) is compared with
the limit values for stable noises during the night period as given in chapter 4.2.
According Vlarem, a tonal correction (TC) of + 5 dB(A) is applicable to BP3 because the difference
between the measured linear level at 50 Hz (69.2 dB) is more than 5 dB higher than the linear levels of
the two neighboring 1/3 octaves (63 dB at 40 Hz and 63.2 dB at 63 Hz) - See table with measured
values during base load in Annex 3. From measurements at the border in the direction of BP3 and
auditive observations during the measurements at BP3, we can conclude that the measured tonal
component at 50 Hz during base load is specific from the power plant (boiler) and not from the
neighbouring industry.
SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

16/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table 5.8: Comparison calculated specific noise of maximum base load to the noise limits
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

LAsp*
dB(A)
47.1
43.2
43.1
42.3
42.9
45.3
45.6
44.7
38.7
40.1

TC
dB(A)
5
0
0
0
0
0
0
0
0
0

LAsp*+TC
dB(A)
52.1
43.2
43.1
42.3
42.9
45.3
45.6
44.7
38.7
40.1

Limit value
dB(A)
50
45
45
45
50
50
50
50
40
40

Evaluation
dB(A)
2.1
-1.8
-1.9
-2.7
-7.1
-4.7
-4.4
-5.3
-1.3
0.1

* Interval of confidence: 3 dB(A)

To BP3 the specific noise exceeds the Vlarem noise limit of 50 dB(A) during the night period, because
of the tonal penalty. Considering the high existing back ground levels during the night period (LAeq,5min. of
53.6 dB(A) and LA95,5min. of 52.8 dB(A)), the interval of confidence of 3 dB(A) and the fact there are no
houses in this zone (nearest house near BP13 at 350 m of BP3), the overcrossing can be considered as
less relevant.
Because the specific noise (without TC) is 47.2 dB(A) to BP3, and there are no overcrossings to the
evaluation points BP3 till BP11 (evaluation points mentioned in the EPC contract) the power plant fulfils
to the requirements of the EPC contract.
To BP13 the specific noise exceeds the noise limit of 40 dB(A) during the night period with 0.1 dB(A).
Considering the high existing back ground levels during the night period (LAeq,5min. of 48.1 dB(A) and
LA95,5min. of 46.7 dB(A)) and the interval of confidence of 3 dB(A), the little overcrossing can be
considered as less relevant. Even, considering the high stable original noise level of 46.7 dB(A) (as
LA95,5min. level), the real Vlarem II noise limit is not 40 dB(A) but can be 41.7 dB(A), so 5 dB(A) less than
the measured original stable noise. So if we evaluate to the possible Vlarem II noise limit of 41.7 dB(A),
there is no crossing of the limit value. To be sure about the Vlarem noise limit T-Power and Siemens
ordered to SGS to execute a longer background measurement in BP13.
The night from 03 till 04/08/2011, SGS has executed long term measurements during the whole night
period (more details are given in Annex 9). During this night there was almost no wind (anemometer
gave 0 m/s) and on the moments there was a bit of wind, the wind came from the southwest (so
downwind from industrial area to evaluation point). During this night, there was no rainfall.
According to Vlarem, we have to take the arithmique mean of the 4 lowest values during the night period
(from 22.00 till 07.00). For the night from 03 till 04/08/2011 this gave an mean value (as LA95,1h during
the night period) of 44.9 dB(A). So a bit less than the 46.7 dB(A) as measured during background
measurements at 13 April 2011 (for a period of 5 minutes between 01.00 and 02.00 hour, but with wind
speed of approx. 2 m/s). This means that the real Vlarem limit value in BP13 is 40 dB(A) and not the
possible 41.7 dB(A) as mentioned before in the report. So we do have a very small overcrossing of 0.1
dB(A) at BP13 during base load.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

17/61

Noise acceptance test Far Field T-Power Tessenderlo

5.7

Siemens NV Energy

Evaluation specific noise Full Bypass (with 100% GT load) to limit values
for incidental noise

In the table underneath the specific noise of Full Bypass condition with 100 GT load (enforced with tonal
correction if applicable) is compared with the limit values for incidental noises during the night period as
given in chapter 4.2. Because the Full Bypass condition with 100% gas turbine load occur less than 10%
of the evaluation period (according Siemens it will occur for a period of max. 5 minutes) this noise can
be considered as incidental noise. The limit value for this kind of noise (as max. LAeq,1sec.-level) is 10
dB(A) higher than the limit values for stable noises.
For incidental noises a tonal correction (TC) of + 5 dB(A) is applicable if the difference between the
measured linear level at considered 1/3 octave band is more than 5 dB higher than the linear levels of
the two neighboring 1/3 octaves. We can see in the table in Annex 3, with measured values during Full
Bypass (with 100 GT load), this is the case at 50 Hz in BP3, BP8 and BP9.
Table 5.9: Comparison calculated incidental specific noise of Full Bypass condition (with 100%
GT load) to the night noise limits for incidental noises
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

LAsp*
dB(A)
50.1
48.3
45.5
43.4
44.0
48.4
48.4
47.4
41.7
41.3

TC
dB(A)
5
0
0
0
0
5
5
0
0
0

LAsp*+TC
dB(A)
55.1
48.3
45.5
43.4
44.0
53.4
53.4
47.4
41.7
41.3

Limit value
dB(A)
60
55
55
55
60
60
60
60
50
50

Evaluation
dB(A)
-4.9
-6.7
-9.5
-11.6
-16.0
-6.6
-6.6
-12.6
-8.3
-8.7

* Interval of confidence: 3 dB(A)

To none of the evaluation points, there is an overcrossing of the night noise limit for incidental noises.

5.8

Evaluation specific noise of Start Up operation to limit values for stable


noise

In the table underneath the specific noise is compared with the limit values for stable noises during the
night period as given in chapter 4.2.
No tonal correction (TC) is applicable to the evaluation points during this working regime because in
none of the evaluation points the difference between the measured linear level (from 50 Hz till 10 kHz)
at the considering 1/3 octave is more than 5 dB higher than the linear levels of the two neighboring 1/3
octaves - See table with measured values during start up in Annex 3.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

18/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Table 5.10: Comparison calculated specific noise of simulated start up to the noise limits
BP
BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11
BP13

LAsp*
dB(A)
48.3
43.7
44.1
43.5
44
46.4
46.7
45.8
40
40.8

TC
dB(A)
0
0
0
0
0
0
0
0
0
0

LAsp*+TC
dB(A)
48.3
43.7
44.1
43.5
44
46.4
46.7
45.8
40
40.8

Limit value
dB(A)
50
45
45
45
50
50
50
50
40
40

Evaluation
dB(A)
-1.7
-1.3
-0.9
-1.5
-6
-3.6
-3.3
-4.2
0
0.8

* Interval of confidence: 3 dB(A)

To BP13 the specific noise exceeds the noise limit of 40 dB(A) during the night period with 0.8 dB(A).
Considering the high existing back ground levels during the night period (LAeq,5min. of 48.1 dB(A) and
LA95,5min. of 46.7 dB(A)) and the interval of confidence of 3 dB(A), the little overcrossing can be
considered as less relevant.
Because there are no overcrossings to the evaluation points BP3 till BP11 (evaluation points mentioned
in the EPC contract) the power plant fulfils to the requirements of the EPC contract.

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

19/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

6 CONCLUSIONS
SGS Belgium and Siemens carried out Noise Acceptance Tests for the far field around the site when
the power plant of T-power at Tessenderlo was in continuous maximal operation (maximum Base Load
with 420 MW production), during Full Bypass operation with 100% Gas turbine load and during
simulated start up with 40% Gas turbine load.
The objective of the Noise Acceptance Test was to check whether the required noise levels in the far
field are met according the Flemish environmental legislation Vlarem II.
The Far Field Noise Acceptance Tests were performed in April (background), May and June 2011 by
Mr. De Winter from SGS Belgium Department Noise and Vibrations) and by Mr. Jttner (background)
and Mr. Ennes (max. base load, full bypass and start up) of Siemens AG Energy- EN32 Acoustics. All
the measurements were witnessed by Mr. Putzeys (or his colleague) of dBA-plan in order of T-power.
The Noise Acceptance Tests shows the following essential results:
The far field noise levels during maximum base load are met in 8 of the 10 Vlarem evaluation
points. The far field noise levels during maximum base load are met in all 9 evaluation points
according the EPC contract.

The far field noise levels during start up (40% GT Load) are met in 9 of the 10 Vlarem
evaluation points. The far field noise levels during start up are met in all 9 evaluation points
according the EPC contract.

To BP3 the specific noise during base load exceeds the Vlarem noise limit of 50 dB(A) during
the night period, because of the tonal penalty. Considering the high existing back ground levels
during the night period (LAeq,5min. of 53.6 dB(A) and LA95,5min. of 52.8 dB(A)), the interval of
confidence of 3 dB(A) and the fact there are no houses in this zone (nearest house near BP13
at 350 m of BP3), the overcrossing can be considered as less relevant (acceptable).

To BP13 the specific noise during base load and start up exceeds the Vlarem noise limit of 40
dB(A) during the night period with resp 0.1 and 0.8 dB(A). Considering the high existing back
ground levels during the night period (LAeq,5min. of 48.1 dB(A) and LA95,5min. of 46.7 dB(A)) and the
interval of confidence of 3 dB(A), the little overcrossing can be considered as less relevant
(acceptable).

Because the full bypass condition with 100% gas turbine load occur less than 10% of the
evaluation period (according Siemens it will occur for a period of max. 5 minutes), this noise can
be considered as an incidental noise. The limit value for this kind of noise (as max. LAeq,1sec.level) is 10 dB(A) higher than the limit values for stable noises. To none of the evaluation points
there is an overcrossing of the night noise limit for incidental noises during full bypass operation
(with 100% gas turbine load).

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

20/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 1: Figures
Figure 6.1: Position evaluation points on land use map (source AGIV GIS Vlaanderen))

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

21/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Figure 6.2: Position measuring and evaluation points 2011 on aerial photograph (source Google
Earth)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

22/61

Noise acceptance test Far Field T-Power Tessenderlo

SGS Belgium NV
Reportnumber : 11.0029-1-v6

Siemens NV Energy

25/09/2011
final report version 3

23/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Figure 6.3: Position noise sources 2011 in acoustical model IMMI

3D-view

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

24/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Figure 6.4: Measurement positions Strber method

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

25/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 2: Working regimes during measurements


From 28 till 29 May 2011 during maximum base load (420 MW)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

26/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

From 27 till 28 May 2011 during full bypass (with 100% GT load)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

27/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

From 13 till 14 June 2011 during simulated start up (with 40% GT load)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

28/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 3: Overview 1/3 octaves measurements


Background measurements
Company:
Date of measurment:
Description:

T-Power Tessenderlo - Siemens


night from 12 till 13 April 2011
Emission and Far field measurement of background (during shut down of hole the station (so also transfo, but one dryer fan was working))

Meas. f(Hz)
12
16
20
25
nr
position
dB dB dB dB
measurements in the far field at 1.5 m heigt (or
1
BP8
56.8 55.4 53.4 53.7
2
BP7
56.5 55.6 49.8 49.5
3
BP6
56.7 52.5 50.2 49.1
4
BP5
58.8 56.0 53.8 53.2
5
BP11 (4m)
59.3 58.3 57.2 55.7
6
BP4
65.1 58.3 55.9 55.1
7
BP13 (4m)
60.3 53.1 48.7 49.7
8
BP3
64.9 60.3 53.8 57.7
9
BP10
60.7 62.0 59.1 57.9
11
BP9
52.9 55.8 53.5 53.5

31
40
50
63
dB dB dB dB
4m to BP11 and BP13)
53.7 51.8 47.8 47.6
47.9 48.0 48.0 49.0
49.0 49.9 49.3 49.2
51.1 50.6 49.9 50.9
53.9 51.3 47.0 43.3
52.4 51.0 50.0 50.8
48.7 49.1 47.6 41.0
58.1 51.4 50.8 54.7
56.5 56.3 55.5 54.2
53.3 51.5 50.5 48.9

measurements according struber at 7m height


13
position a
60.6 54.9 51.9 57.3
14
position b
60.5 59.9 57.1 56.4
15
position c/d
60.2 58.4 52.1 54.3
16
position e *
63.8 61.9 60.0 58.3
18
position g *
69.2 67.2 65.1 63.3
19
position h
55.7 57.1 54.5 53.0
20
position i
64.0 57.4 55.9 56.1
21
position j
68.8 56.9 53.0 55.4
22
position k
68.3 59.6 57.2 56.1
23
position l
67.0 60.5 58.1 57.7
24
position n
63.8 59.7 57.8 56.5

46.4
53.8
50.0
55.5
61.2
52.2
59.2
55.3
56.9
56.3
53.7

45.0
50.4
48.3
54.5
58.9
54.1
56.1
64.5
55.5
54.5
53.6

45.5
49.3
47.7
54.2
58.2
49.9
49.5
53.8
49.6
48.7
47.4

44.8
45.6
42.4
48.3
53.1
51.7
54.4
52.6
53.2
51.7
48.1

80
dB

100
dB

125
dB

160
dB

200
dB

250
dB

315
dB

400
dB

500
dB

630
dB

800
dB

1 k 1.25 k 1.6 k
dB dB dB

2k
dB

2.5 k 3.15 k 4 k
dB dB dB

5k
dB

6.3 k
dB

8k
dB

10 k
dB

LAeq
dB(A)

44.8
45.7
46.4
46.7
38.5
46.5
35.6
49.2
52.3
46.1

40.2
41.8
48.9
45.4
38.1
46.2
41.6
49.3
51.8
45.6

37.0
31.3
41.9
41.3
36.8
42.0
42.7
46.9
46.2
39.2

38.7
31.5
42.0
39.2
38.9
40.1
44.0
46.2
44.8
37.9

40.7
37.5
40.1
39.5
41.9
39.8
47.3
44.8
42.8
35.5

41.0
39.3
38.4
36.4
41.8
38.2
43.1
43.2
39.9
34.4

40.7
40.6
36.8
34.9
41.1
35.7
41.1
41.7
39.8
35.8

41.8
42.2
39.8
36.1
37.6
37.3
41.0
41.5
42.3
38.2

43.2
42.1
42.5
40.2
38.0
42.3
42.1
45.3
45.3
41.3

41.1
40.9
41.4
40.5
38.6
42.5
41.5
45.8
47.1
42.1

41.4
38.0
38.9
38.9
36.5
40.4
39.5
43.7
47.5
40.6

40.3
39.1
39.3
39.3
36.0
38.7
39.0
44.1
45.8
40.4

40.4
40.2
40.7
42.1
37.2
39.4
39.1
45.0
46.7
39.9

36.7
35.3
35.3
36.4
32.7
36.5
34.8
43.5
44.7
36.8

33.0
31.6
31.6
33.1
29.0
33.5
31.4
43.1
42.0
34.8

29.6
28.4
27.4
29.5
24.8
30.6
27.1
41.2
39.9
31.1

25.2
26.2
23.1
24.9
21.6
26.9
23.1
39.5
36.7
30.0

22.7
25.1
21.3
22.5
20.7
24.1
20.6
35.5
32.9
37.8

22.5
24.9
21.5
21.9
20.7
22.8
19.7
30.1
27.7
30.1

22.3
24.9
21.7
22.2
20.8
23.0
19.9
26.2
23.6
26.8

22.5
25.3
22.1
23.1
21.3
22.4
20.4
24.2
22.2
26.2

23.4
26.3
23.5
24.9
22.5
23.8
21.1
23.2
22.5
26.8

48.8
47.8
47.9
47.9
45.4
48.1
48.1
53.6
54.5
48.8

46.5
45.7
45.5
48.0
53.8
48.9
46.4
45.6
45.8
44.2
45.2

47.3
47.6
48.2
50.2
55.4
54.4
46.0
48.0
46.5
45.4
44.6

46.1
47.1
47.1
49.2
55.8
46.9
44.3
46.7
45.5
45.3
43.9

44.7
46.2
46.6
50.4
57.2
47.4
46.5
49.1
46.4
46.7
45.2

44.8
44.8
47.2
48.5
51.5
48.3
50.1
48.7
49.4
47.4
48.4

44.3
45.1
45.5
47.5
50.8
54.2
49.3
48.4
46.9
47.3
46.1

42.3
43.3
44.3
46.8
49.8
47.0
48.5
48.4
48.0
46.5
45.2

42.8
43.6
45.3
47.2
50.6
47.4
46.4
47.0
45.0
44.8
43.3

42.9
43.7
46.4
47.4
48.8
47.3
49.4
48.6
46.5
46.0
44.8

42.4
44.4
45.4
48.1
50.3
46.7
48.7
49.3
46.2
46.4
46.3

41.4
42.1
44.6
46.0
51.1
46.6
46.8
46.7
44.5
44.2
41.9

40.9
41.9
46.1
45.6
50.5
45.5
46.6
46.3
44.5
44.4
41.7

42.3
42.9
44.7
47.0
51.0
47.2
47.3
46.7
45.3
45.7
42.3

39.1
40.1
42.8
44.9
50.4
45.6
43.5
43.0
42.1
42.2
39.2

35.7
38.5
42.0
46.1
52.0
45.3
41.8
41.5
40.1
40.0
38.0

31.8
35.5
39.9
44.0
49.4
41.9
38.8
38.5
36.9
36.8
34.8

26.9
31.2
36.8
42.8
47.2
39.0
35.2
34.8
32.9
32.7
31.2

22.7
27.2
33.4
41.1
44.9
38.2
33.5
31.7
29.1
28.5
26.7

20.8
22.4
26.8
35.2
40.2
36.2
29.8
26.7
24.1
23.0
22.1

20.8
21.2
22.3
29.1
37.1
31.6
22.4
22.8
21.3
20.9
20.7

20.6
21.0
20.8
26.2
32.7
30.6
20.9
21.1
20.6
20.5
20.6

21.1
21.5
20.8
24.1
32.2
30.9
21.1
21.1
20.9
20.9
21.2

50.0
51.2
53.7
56.1
60.7
56.0
55.5
55.2
53.5
53.3
51.5

Measurements during Full bypass with 100% GT load


Company:
Date of measurment:
Description:
Meas. f(Hz)
12
nr
position
dB
emission measurements according ISO
1
1.9m from stack
75.5
2
1.9m from stack
75.3
3
back ground around stack 73.3
4
1.7 m from Outlet CT 8
75.0
5
1.7 m from Outlet CT 7
77.3
6
1.7 m from Outlet CT 6
79.7
7
1.5 m from Inlet CT 1 till 8 72.8

T-Power Tessenderlo - Siemens


night from 27 till 28 May 2011
Emission and Far field measurement during bypass with 100% GT Load
16
dB
3746
75.0
75.4
72.6
79.5
80.2
80.2
85.4

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

80
dB

100
dB

125
dB

160
dB

200
dB

250
dB

315
dB

400
dB

500
dB

630
dB

800
dB

1 k 1.25 k 1.6 k
dB dB dB

75.2
74.9
72.5
73.9
74.7
76.2
72.8

74.0
73.5
71.5
79.3
78.8
82.2
77.0

73.0
72.8
69.3
85.1
81.8
83.3
78.6

79.0
79.0
74.4
80.0
79.9
79.8
78.3

84.8
84.7
78.5
80.3
79.7
79.8
81.3

76.2
75.9
71.3
79.7
79.5
80.1
77.5

70.1
69.6
67.8
77.1
77.1
78.4
73.8

68.6
68.5
63.9
72.4
73.3
73.9
67.9

65.1
65.0
61.9
68.6
69.1
69.3
62.2

63.0
62.9
60.0
64.6
65.8
66.0
61.2

60.4
60.9
57.8
62.0
63.3
63.6
58.0

58.0
58.0
55.8
59.2
60.5
60.9
49.9

58.2
58.1
54.1
57.9
59.6
59.6
50.9

55.8
55.8
52.2
57.7
58.5
58.7
52.1

56.5
56.8
51.9
54.5
55.7
56.2
57.3

57.6
57.7
52.1
52.3
53.1
53.4
53.0

57.0
56.8
50.5
53.5
55.4
52.3
54.2

57.5
57.6
51.1
51.1
52.5
52.5
48.0

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

29/61

58.1
58.1
51.2
47.9
49.8
50.7
46.4

57.1
57.1
48.8
46.9
48.6
49.9
44.8

2k
dB
54.8
54.8
47.3
47.2
48.3
49.5
44.1

2.5 k 3.15 k 4 k
dB dB dB
52.0
51.9
47.0
45.7
46.7
48.2
42.8

49.4
49.2
43.9
44.7
45.5
46.6
42.2

45.6
45.5
40.7
42.8
43.0
44.2
43.2

5k
dB

6.3 k
dB

8k
dB

10 k
dB

LAeq
dB(A)

42.7
42.4
37.5
40.2
40.2
41.5
48.6

38.4
38.3
33.0
38.5
38.3
39.1
53.4

34.3
34.2
29.6
36.5
36.7
37.5
56.0

30.8
30.9
25.7
35.2
35.8
36.5
57.6

66.8
66.8
61.0
64.1
65.0
65.3
64.4

Noise acceptance test Far Field T-Power Tessenderlo

measurements according struber at 7m


8
position a
63.3
9
position b
64.8
10
position c
65.0
11
position d
64.4
12
position e
62.3
13
position f
63.6
14
position g
67.6
15
position h
70.5
16
position i
74.4
17
position j
71.3
18
position k
75.2
19
position l
73.4
*
position m
71.4
20
position n
67.7
21
position o
68.5
22
position p
69.1
24
position q (**)
68.9

height
72.9 64.9
70.0 68.5
70.0 68.4
62.6 69.8
65.7 65.6
63.8 63.7
62.3 63.7
64.4 66.3
65.4 66.1
66.2 64.3
68.1 66.3
67.0 66.0
68.7 64.7
69.9 62.9
74.7 68.7
80.0 68.9
73.8 69.4

Siemens NV Energy

68.1
66.0
65.5
67.0
65.4
61.5
63.0
62.6
61.6
62.9
65.4
62.9
64.3
65.3
70.6
71.0
72.4

69.9
69.1
68.1
66.4
63.5
60.8
60.4
64.4
61.2
65.2
65.5
63.2
69.4
71.9
77.7
78.9
74.8

65.6
67.2
65.9
65.4
63.8
62.3
61.2
65.7
63.3
63.6
69.6
66.0
67.8
69.1
74.1
76.1
73.3

68.7
68.0
67.8
73.4
70.5
69.0
70.7
79.0
72.9
73.4
82.4
75.8
73.8
69.8
74.9
75.5
73.0

65.3
63.3
61.0
61.1
61.9
60.1
60.7
68.7
67.6
64.1
68.8
65.8
66.3
66.7
71.6
73.1
70.9

63.1
60.9
58.5
57.5
56.7
55.2
59.1
57.1
57.2
55.9
59.0
57.7
62.1
64.3
69.1
71.0
69.0

59.3
60.6
58.0
58.2
54.7
54.9
57.2
58.0
58.4
59.0
62.3
61.2
61.0
60.8
68.0
70.4
70.2

57.0
57.7
56.3
56.2
54.2
50.2
53.9
53.8
53.9
53.3
55.4
57.4
60.1
61.8
67.9
67.1
63.4

54.7
55.3
52.8
52.3
51.5
50.5
52.1
53.2
55.0
53.8
54.1
57.9
57.6
57.3
64.1
63.1
61.4

53.1
54.1
53.3
53.5
54.3
51.0
53.6
56.4
55.7
52.9
55.2
60.8
58.5
53.0
58.1
62.6
63.2

51.7
51.7
50.3
50.1
49.0
48.3
51.0
53.4
52.3
50.8
52.7
53.7
53.2
52.6
56.0
56.6
59.0

52.1
52.7
51.0
50.7
52.1
49.5
55.3
54.8
54.0
52.5
52.8
53.1
53.1
53.1
58.4
71.3
62.8

51.6
52.2
50.6
50.9
49.5
48.8
52.7
54.1
51.3
50.7
52.5
54.4
54.3
54.1
54.9
57.9
61.1

51.3
53.3
50.6
51.5
49.3
49.1
50.6
51.6
50.2
50.5
50.7
56.8
55.1
52.2
56.0
56.8
58.7

51.5
52.5
53.2
52.5
52.1
51.0
54.0
54.3
50.9
52.8
52.7
53.8
52.9
51.8
54.0
55.3
58.0

51.2
52.4
51.9
52.3
50.3
50.5
53.9
52.7
50.0
50.5
52.3
52.5
52.1
51.6
53.9
54.1
57.7

54.2
57.5
59.4
59.8
54.7
56.4
59.6
64.3
57.5
51.7
56.0
54.8
53.1
50.3
51.0
52.4
56.7

51.7
53.9
54.9
55.5
52.6
54.3
57.2
56.9
53.1
53.5
54.2
54.6
52.7
49.4
49.4
50.8
55.1

53.0
54.9
55.9
56.8
52.6
56.5
57.8
56.9
55.3
51.4
52.8
52.9
51.0
47.7
48.6
49.9
53.6

53.0
55.7
56.2
57.0
51.4
55.5
57.3
55.7
52.1
49.9
51.5
53.5
51.3
46.5
47.3
48.5
52.4

53.9
56.7
56.2
58.8
52.5
54.4
58.3
57.0
51.3
51.2
53.0
54.3
52.2
47.8
46.0
47.1
51.7

49.5
54.8
52.3
54.5
47.5
50.7
54.1
53.4
47.3
46.7
47.9
49.6
47.4
42.9
43.1
44.7
48.0

47.3
51.2
50.9
53.9
45.1
48.6
51.9
51.9
45.3
44.0
45.7
48.1
45.8
40.4
40.9
41.9
45.4

41.9
45.1
46.1
49.0
41.1
45.8
47.9
48.1
41.4
40.5
42.8
44.9
42.4
35.7
40.3
42.1
41.7

36.2
39.4
42.2
43.9
36.4
42.1
43.2
43.9
36.1
35.6
37.6
39.7
37.3
31.6
43.4
45.2
41.4

31.5
32.8
37.4
38.7
31.7
34.6
38.1
40.0
32.0
31.5
34.0
36.7
34.4
29.3
46.3
48.1
42.3

28.2
28.0
31.7
33.5
27.7
28.4
33.1
35.8
27.1
26.7
29.3
31.2
29.8
27.8
48.0
49.8
42.9

62.8
65.4
65.6
66.8
62.1
64.3
67.0
68.0
63.3
61.5
63.4
64.2
62.7
60.1
62.9
67.0
66.4

63.8
66.4
65.1
61.9
61.5
59.8
61.8
54.6
72.5
64.3
65.2

53.3
61.0
59.9
59.3
59.1
55.0
56.8
48.0
61.9
54.8
53.5

50.8
53.8
54.5
56.1
56.1
50.3
53.6
42.1
55.2
52.7
46.3

47.1
42.5
46.9
53.3
53.0
44.3
51.3
39.6
52.2
53.0
42.4

46.3
33.8
43.0
52.7
52.6
41.5
51.2
40.2
48.3
47.5
37.2

41.5
32.9
40.2
49.1
48.9
38.5
46.4
41.3
46.5
46.0
34.2

40.3
36.1
38.6
44.4
44.3
40.0
39.6
45.4
43.9
43.7
32.9

37.8
38.0
37.5
42.4
41.9
40.2
36.1
42.9
41.7
40.1
32.4

39.3
39.8
37.8
40.9
40.0
41.4
35.3
42.7
41.6
39.3
34.3

38.3
41.0
40.7
39.5
38.8
41.4
37.6
41.1
41.8
42.3
34.6

37.7
42.6
41.1
39.6
39.1
40.1
42.1
41.3
43.5
41.8
35.5

41.4
41.0
39.4
37.7
36.9
38.5
43.5
40.2
44.4
43.1
38.8

41.1
41.8
40.5
38.0
38.4
37.7
43.2
38.5
44.4
44.2
39.5

46.8
37.1
38.5
40.7
40.5
37.2
43.2
38.6
44.8
45.1
42.8

43.8
36.8
37.6
41.7
40.1
36.2
41.2
38.0
44.2
47.1
43.6

45.5
34.8
35.5
38.2
37.0
33.5
39.7
35.5
42.5
44.5
42.5

46.0
32.7
33.2
35.6
35.1
31.2
38.5
33.5
42.6
41.4
40.9

45.8
32.5
32.8
35.5
34.5
29.6
38.1
32.0
41.4
40.4
43.0

41.2
28.8
27.6
32.1
30.2
25.0
34.5
26.7
38.6
39.0
37.2

37.5
26.6
25.2
34.2
26.7
22.0
32.5
23.0
36.8
36.0
34.5

32.6
25.7
24.4
33.2
25.2
20.1
28.8
21.0
34.5
33.3
30.6

26.9
26.4
24.4
34.4
30.0
19.8
26.6
20.5
30.3
28.1
27.0

23.8
25.5
24.9
33.0
23.6
20.2
26.0
20.7
29.1
23.3
26.6

24.3
25.7
25.6
28.0
26.9
21.0
26.4
21.6
29.5
23.5
27.5

54.5
48.4
48.0
50.0
49.0
46.5
51.0
47.8
53.7
53.8
51.5

Remarks
*
m = logarithmic mean of "l" and "n"
19
position l
73.4 67.0 66.0 62.9 63.2 66.0 75.8 65.8 57.7 61.2 57.4 57.9 60.8 53.7 53.1 54.4 56.8 53.8 52.5 54.8 54.6 52.9 53.5 54.3 49.6 48.1 44.9 39.7 36.7 31.2
20
position n
67.7 69.9 62.9 65.3 71.9 69.1 69.8 66.7 64.3 60.8 61.8 57.3 53.0 52.6 53.1 54.1 52.2 51.8 51.6 50.3 49.4 47.7 46.5 47.8 42.9 40.4 35.7 31.6 29.3 27.8
position m
71.4 68.7 64.7 64.3 69.4 67.8 73.8 66.3 62.1 61.0 60.1 57.6 58.5 53.2 53.1 54.3 55.1 52.9 52.1 53.1 52.7 51.0 51.3 52.2 47.4 45.8 42.4 37.3 34.4 29.8

64.2
60.1
62.7

**
23
24**

In measurement 23 there was an influance of a nearby (not relevant to the far field) source outside the measurement line, so measurement 24 is moved a bit further from this source
position q
67.7 83.2 69.1 70.2 73.2 75.8 75.7 72.7 72.1 67.7 65.9 64.6 64.5 61.3 63.0 64.0 62.6 61.8 61.7 60.9 59.9 58.5 55.4 52.8 49.8 47.1 44.3 46.4 47.5 49.1
position q
68.9 73.8 69.4 72.4 74.8 73.3 73.0 70.9 69.0 70.2 63.4 61.4 63.2 59.0 62.8 61.1 58.7 58.0 57.7 56.7 55.1 53.6 52.4 51.7 48.0 45.4 41.7 41.4 42.3 42.9

69.7
66.4

***

measurement 28 in BP5 is disturbed by a car, so repeated and measurement 29 to use for BP5

measurements in the far field at 1.5 m heigt (or 4m to BP11 and BP13)
25
BP8
58.5 61.3 58.4 59.4 61.4 57.0
26
BP7
57.3 63.2 54.7 60.6 63.7 65.2
27
BP6
58.4 60.3 56.6 59.1 67.3 64.6
28
BP5***
62.9 63.6 57.0 59.5 62.4 59.6
29
BP5
62.7 66.9 57.0 60.0 63.5 59.3
30
BP11 (4m)
60.3 64.9 54.9 57.1 58.3 56.6
31
BP4
64.4 66.8 58.1 58.0 63.6 57.7
32
BP13 (4m)
61.7 60.1 55.2 54.7 58.5 52.5
33
BP3
69.1 64.3 62.2 61.9 64.6 61.7
34
BP10
56.7 60.7 59.6 59.8 56.8 59.8
35
BP9
57.1 66.3 60.6 59.5 59.3 56.0

Legende
Zuivere toon : het geluidsdrukniveau in deze band steekt minstens 5 dB boven de omliggende tertsbanden uit
Plotse overgang in het spectrum : het geluidsdrukniveau in deze band steekt minstens 5 dB boven n van de omliggende banden uit

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

30/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Measurements during max. Base Load (420 MW production)


Company:
Date of measurment:
Description:

T-Power Tessenderlo - Siemens


night from 28 till 29 May 2011
Emission and Far field measurement during Base Load (420 MW)

Meas. f(Hz)
12
16
20
25
31
40
nr
position
dB dB dB dB dB dB
emission measurements according ISO 3746
1
1.9m from stack
76.9 76.6 75.7 73.7 73.4 79.6
2
1.9m from stack
76.6 76.4 75.5 73.6 72.8 79.5
3
background around stack
74.4 73.5 73.4 71.4 70.0 76.1
4
1.7 m from Outlet CT 8
73.2 77.3 73.8 79.1 84.6 80.9
5
1.7 m from Outlet CT 7
76.2 83.4 76.4 78.1 84.8 79.6
6
1.7 m from Outlet CT 6
75.2 79.9 74.2 81.9 81.9 80.1
7
1.5 m from Inlet CT 1 till 8
79.5 86.2 77.1 79.0 80.3 80.5
measurements according struber at 7m height
8
position a
66.2 82.9 66.7 68.7 73.1 68.1
9
position b
65.9 74.2 68.9 67.7 70.4 69.6
10
position c
63.9 73.6 68.7 67.3 66.7 67.1
11
position d
63.3 66.8 69.5 67.8 67.0 65.9
12
position e
66.3 69.5 67.6 67.0 65.4 65.4
13
position f
62.8 61.9 62.6 62.1 60.6 69.0
14
position g
72.9 70.6 70.1 69.5 68.4 68.0
15
position h
69.6 64.5 65.6 61.3 64.3 65.2
16
position i
72.4 67.8 66.9 62.0 61.8 64.7
17
position j
71.4 70.1 67.9 66.5 65.0 66.9
18
position k
73.1 70.3 67.7 68.1 65.5 71.2
19
position l
71.7 68.3 66.7 65.1 66.4 67.0
*
position m
69.8 70.5 65.3 66.5 71.6 68.4
20
position n
66.2 72.0 63.2 67.5 73.9 69.4
21
position o
69.7 77.5 69.8 71.2 76.8 74.9
22
position p
70.0 77.4 69.1 72.4 73.6 76.3
23
position q
69.7 77.8 69.6 70.8 75.2 74.6
measurements in the far field at 1.5 m heigt (or 4m to BP11 and BP13)
24
BP8
59.9 64.9 59.3 59.4 61.8 58.5
25
BP7
55.3 62.2 54.5 62.3 66.1 67.3
26
BP6
59.1 62.3 57.1 60.6 65.5 66.0
27
BP11 (4m)
57.6 64.0 56.0 56.6 59.0 57.6
28
BP5
58.4 65.1 57.1 59.0 62.6 60.5
29
BP4
60.4 68.0 57.8 58.2 61.9 58.0
30
BP10
63.4 63.8 60.8 59.5 57.1 57.8
31
BP9
73.3 71.5 68.9 67.1 62.9 61.8
32
BP3
65.2 65.8 62.4 61.3 65.7 63.0
33
BP13 (4m)
64.2 65.6 60.6 59.3 58.5 55.5

6.3 k 8 k
dB dB

10 k
dB

LAeq
dB(A)

41.9
41.9
34.6
40.3
39.4
39.2
48.5

38.1
38.1
29.8
38.4
37.6
37.0
53.5

34.2
34.4
25.6
36.2
36.1
36.0
56.3

30.9
31.0
24.2
34.7
35.1
34.9
57.8

66.7
66.6
61.3
64.3
64.5
64.6
64.2

41.5
44.1
46.6
47.5
44.6
46.9
49.5
50.0
42.7
41.0
45.2
44.8
42.4
36.8
40.1
42.0
43.6

36.3
38.7
42.3
43.3
40.4
42.9
44.9
45.6
38.4
37.1
41.3
40.8
38.6
34.2
41.4
43.8
42.3

31.9
30.7
34.6
36.3
35.5
35.5
36.9
39.3
32.0
31.8
35.1
34.7
33.1
30.4
45.1
47.3
43.7

29.0
25.8
27.7
30.5
31.3
28.9
30.3
33.5
26.2
28.1
30.0
29.5
28.5
27.3
47.6
49.6
45.0

26.9
22.7
22.7
25.9
28.5
23.8
25.4
27.5
22.7
26.3
26.1
25.7
25.4
25.1
49.4
50.6
45.3

60.1
60.3
60.9
61.8
60.8
60.8
63.2
64.6
60.7
58.4
60.3
61.5
60.5
58.7
63.0
65.8
65.5

31.6
26.0
24.8
20.6
23.2
26.7
32.5
29.1
34.5
26.8

26.1
24.7
24.2
20.1
21.6
24.7
29.6
28.3
32.4
25.8

24.1
24.0
24.4
20.1
21.0
23.6
26.8
27.6
28.3
24.9

24.3
23.6
24.9
20.4
21.3
23.5
25.7
27.2
27.5
24.5

25.8
24.3
26.3
21.1
22.0
24.6
26.2
28.7
27.9
24.6

49.1
47.1
46.7
44.7
46.3
48.2
52.6
48.3
51.9
46.4

Remarks
*
m = logarithmic mean of "l" and "n"
19
position l
71.7 68.3 66.7 65.1 66.4 67.0 71.7 66.4 58.6 60.5 56.1 56.1 60.9 52.0 52.7 53.1 52.2 51.5 50.0 53.4 50.4 50.2 50.8 49.6 47.7 44.8 40.8 34.7 29.5 25.7
20
position n
66.2 72.0 63.2 67.5 73.9 69.4 69.9 67.6 64.5 63.5 61.1 56.8 53.2 51.8 56.7 55.0 49.6 50.0 50.5 47.6 45.7 44.2 43.3 41.4 39.7 36.8 34.2 30.4 27.3 25.1
position m
69.8 70.5 65.3 66.5 71.6 68.4 70.9 67.0 62.5 62.3 59.3 56.5 58.6 51.9 55.1 54.2 51.1 50.8 50.3 51.4 48.7 48.2 48.5 47.2 45.3 42.4 38.6 33.1 28.5 25.4

61.5
58.7
60.5

SGS Belgium NV
Reportnumber : 11.0029-1-v6

50
dB

63
dB

80
dB

100
dB

125
dB

160
dB

200
dB

250
dB

315
dB

400
dB

500
dB

630
dB

800
dB

1 k 1.25 k 1.6 k
dB dB dB

82.0
81.9
78.6
80.2
79.5
79.6
81.8

74.5
74.3
70.5
79.6
78.8
79.3
78.4

71.2
70.8
67.9
77.2
76.2
77.8
74.5

68.7
68.9
64.4
72.4
72.2
73.6
68.3

65.6
65.2
61.1
68.0
68.2
68.4
63.3

63.7
63.4
59.3
63.9
64.8
65.0
62.1

61.1
61.0
59.0
61.2
62.3
63.2
58.5

58.8
58.5
55.9
59.4
60.3
60.3
51.5

58.6
58.2
55.7
59.3
59.2
59.1
51.5

56.6
56.4
54.0
57.9
57.8
58.5
51.5

57.0
57.0
54.1
54.3
55.1
55.5
51.4

57.7
57.6
53.3
53.2
53.6
53.0
50.8

56.8
56.7
51.1
53.6
54.5
51.9
50.1

57.5
57.4
52.0
51.8
53.0
52.2
48.5

58.1
57.9
50.3
48.6
49.9
49.1
47.2

57.1
57.0
48.4
47.4
48.7
47.7
45.7

54.7
54.6
46.6
48.1
48.3
47.6
45.1

51.6
51.4
44.6
45.8
46.0
45.6
43.7

49.1
49.1
42.1
45.4
45.5
45.3
43.3

45.0
44.9
38.3
43.3
42.9
42.8
44.0

69.9
70.3
65.9
67.2
67.7
74.6
69.4
71.3
71.7
71.7
76.8
71.7
70.9
69.9
75.1
76.0
73.9

66.2
64.7
60.8
62.5
62.5
64.2
65.2
67.0
66.6
65.7
68.4
66.4
67.0
67.6
72.1
74.6
71.9

65.3
62.8
58.9
63.4
65.1
63.4
69.0
59.5
60.2
63.4
66.1
58.6
62.5
64.5
69.7
71.9
68.7

60.5
59.4
56.4
57.6
54.9
52.6
58.3
58.8
57.2
57.2
60.6
60.5
62.3
63.5
69.1
73.8
71.3

59.4
60.1
60.8
57.0
55.7
51.5
55.8
52.8
53.1
52.2
54.6
56.1
59.3
61.1
67.9
67.7
63.8

56.7
55.2
53.1
52.3
51.2
49.9
53.6
52.7
52.8
52.2
53.7
56.1
56.5
56.8
64.7
63.4
62.8

54.8
56.3
51.9
52.9
56.2
54.1
57.1
56.0
54.3
52.0
54.0
60.9
58.6
53.2
57.4
60.2
60.7

51.8
51.1
49.8
50.0
49.2
48.3
50.4
54.0
51.8
49.6
51.8
52.0
51.9
51.8
57.2
56.3
59.0

57.1
55.1
53.1
51.5
51.5
50.7
51.6
55.0
53.5
51.9
53.1
52.7
55.1
56.7
61.8
68.7
60.1

54.0
52.1
49.5
50.6
49.2
48.8
49.8
54.3
51.7
50.0
52.3
53.1
54.2
55.0
56.3
57.0
60.0

51.9
49.6
49.0
50.6
48.9
47.9
49.0
51.7
50.6
50.4
50.1
52.2
51.1
49.6
53.1
55.3
59.4

51.8
49.7
49.8
50.6
50.8
49.1
51.8
54.1
51.6
49.7
50.7
51.5
50.8
50.0
53.4
55.0
57.8

50.2
49.2
48.7
49.1
49.6
47.5
49.9
50.2
48.7
47.7
49.4
50.0
50.3
50.5
53.2
55.1
57.2

51.3
51.8
53.0
54.3
54.8
53.0
55.7
58.7
55.9
50.4
51.3
53.4
51.4
47.6
50.0
51.2
55.5

47.2
48.1
48.4
48.9
49.4
48.4
51.3
51.1
47.2
46.5
48.2
50.4
48.7
45.7
48.3
49.8
53.1

47.0
48.5
49.6
51.2
49.8
49.8
52.0
55.0
49.5
47.7
49.0
50.2
48.2
44.2
47.5
48.8
52.0

48.1
50.5
51.9
52.8
51.0
52.6
55.0
55.0
49.4
46.9
49.4
50.8
48.5
43.3
45.9
46.9
50.4

46.2
48.0
49.4
50.2
47.7
49.1
51.7
51.3
45.3
44.6
48.3
49.6
47.2
41.4
43.5
44.7
47.4

44.6
47.2
50.2
51.0
47.9
50.3
52.4
53.0
45.5
43.8
47.5
47.7
45.3
39.7
41.7
43.8
46.1

61.4
67.9
65.8
59.3
63.3
60.0
61.9
65.5
69.2
54.5

54.5
60.7
60.1
55.3
60.2
58.8
56.3
56.1
63.2
49.7

54.8
53.9
53.8
50.5
57.1
57.9
55.8
54.7
63.8
46.3

48.4
43.9
46.2
42.4
52.2
50.9
51.9
47.1
52.5
41.4

47.2
34.6
42.6
38.4
51.8
50.6
46.9
43.0
47.5
41.1

43.0
34.0
39.9
38.4
47.7
45.0
44.2
40.2
45.4
41.4

39.2
37.5
37.5
40.2
41.1
37.4
40.4
38.5
43.0
44.1

37.2
38.9
35.5
40.6
37.6
34.6
38.2
37.8
42.0
42.0

38.0
41.0
36.6
41.3
37.1
34.3
38.9
38.7
42.3
41.3

37.8
41.8
38.8
38.8
34.5
36.8
41.0
38.7
40.3
39.5

39.1
40.9
40.1
37.5
35.2
41.1
43.1
40.5
42.2
40.2

40.7
38.2
39.3
36.7
35.7
41.1
46.0
41.4
41.8
38.6

40.2
37.7
38.0
35.2
36.5
40.4
46.5
40.2
42.5
36.9

41.8
36.2
36.7
35.0
37.0
39.3
43.8
38.7
42.9
36.8

37.7
34.7
35.0
33.0
35.2
37.0
42.3
37.8
41.5
35.4

38.4
32.7
33.1
31.0
32.5
36.1
41.5
36.8
40.5
33.5

37.3
30.9
31.3
28.7
31.0
34.1
40.2
34.5
40.2
31.3

35.6
29.1
28.8
25.8
28.3
31.9
37.8
32.3
38.5
29.3

35.5
27.8
27.0
22.9
25.9
29.3
35.8
30.7
36.4
27.8

25/09/2011
final report version 3

31/61

2 k 2.5 k 3.15 k 4 k
dB dB dB dB

5k
dB

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Measurements during simulated start up with 40% GT load


Company:
Date of measurment:
Description:

T-Power Tessenderlo - Siemens


night from 13 till 14 June 2011
Emission and Far field measurement during simulated start up at 40% GT load

Meas.
f(Hz)
12
16
number position
dB
dB
emission measurements according ISO 3746
1
1.9m from stack
81.0 80.6
2
1.9m from stack
82.2 81.0
3
background around stack
78.9 78.7
4
1.7 m from Outlet CT 8
69.1 81.0
5
1.7 m from Outlet CT 7
69.9 76.2
6
1.7 m from Outlet CT 6
69.6 77.1
7
1.5 m from Inl et CT 1 till 8 72.7 85.0
measurements according struber at 7m height
8
position a
62.3 80.1
9
position b
63.3 72.4
10
position c
62.9 73.1
11
position d
65.1 66.5
12
position e
61.5 68.1
13
position f
62.1 64.0
14
position g
66.5 63.3
15
position h
68.8 66.4
16
position i
74.6 69.3
17
position j
69.6 66.9
18
position k
73.5 69.5
19
position l
72.1 67.0
*
position m
70.0 68.9
20
position n
65.9 70.2
21
position o
67.8 73.1
22
position p
68.6 77.9
23
position q **
67.4 75.2

10 k
dB

LAeq
dB(A)

30.0
29.9
31.1
42.0
42.0
40.9
57.4

26.3
26.2
27.9
41.0
41.2
40.5
59.5

59.5
59.5
59.4
65.4
66.0
65.8
66.2

38.3
40.8
44.7
46.2
38.6
44.5
44.8
46.4
43.2
44.7
47.3
47.9
45.2
36.8
48.3
49.1
45.9

34.9
36.0
41.4
42.6
35.0
38.6
40.7
43.4
40.6
41.5
45.7
45.6
42.8
33.3
51.3
52.0
47.7

32.5
32.1
38.5
38.4
31.7
33.6
36.5
40.8
39.5
39.8
44.7
43.9
41.1
31.3
53.3
54.3
49.2

61.2
62.7
63.5
63.7
60.6
62.3
65.3
65.6
62.5
61.5
64.2
65.0
62.7
58.4
62.1
65.2
65.0

22.7
20.3
24.8
20.0
31.5
29.0
25.5
24.3
25.9
27.6

21.1
20.2
23.8
20.3
29.5
25.1
23.3
23.6
25.4
22.7

21.7
20.8
24.0
21.0
28.9
24.0
23.9
22.7
24.4
22.3

47.2
45.1
48.3
47.1
54.6
53.2
49.0
47.2
48.1
53.1

m = logarithm ic mean of "l" and "n"


position l
72.1 67.0 64.5 63.3 64.8 64.7 66.6 61.0 59.2 59.3 56.3 56.1 61.4 53.2 52.1 51.5 57.3 52.0 51.5 55.0 53.7 54.0 54.0 55.1 53.9 53.0 50.2 47.9 45.6 43.9
position n
65.9 70.2 61.6 65.5 66.9 69.0 69.5 67.6 63.8 58.9 56.2 53.1 52.8 50.6 51.4 49.7 50.2 49.3 48.9 47.5 46.6 46.8 45.7 46.6 45.5 43.9 40.0 36.8 33.3 31.3
position m
70.0 68.9 63.3 64.5 66.0 67.4 68.3 65.4 62.1 59.1 56.3 54.9 59.0 52.1 51.8 50.7 55.1 50.9 50.4 52.7 51.5 51.7 51.6 52.7 51.5 50.5 47.6 45.2 42.8 41.1

65.0
58.4
62.7

measurements in the far field at 1.5 m heigt


24
BP5
61.7
25
BP11 (4m )
59.8
26
BP4
62.5
27
BP13 (4m )
62.1
28
BP3
68.5
29
BP10
58.1
30
BP9
54.2
31
BP6
59.7
32
BP7
57.2
33
BP8
58.3

Remarks
*
19
20

**

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

80
dB

100
dB

125
dB

160
dB

200
dB

250
dB

315
dB

400
dB

500
dB

630
dB

800
dB

1 k 1.25 k 1.6 k
dB
dB
dB

2 k 2.5 k 3.15 k 4 k
dB dB
dB
dB

77.7
79.5
77.3
72.1
72.7
72.6
72.3

74.6
76.4
75.1
78.5
76.7
83.8
78.1

72.0
74.4
73.7
84.0
83.9
78.7
80.9

75.7
76.4
73.8
80.9
80.4
80.2
80.6

71.9
73.3
70.7
80.7
80.3
80.3
82.1

63.1
65.7
63.2
80.3
80.6
80.8
78.4

63.9
65.2
62.6
78.8
78.5
79.3
74.3

67.9
68.2
65.6
73.9
74.5
74.8
67.7

61.2
61.4
57.3
70.1
70.3
70.2
63.3

57.8
57.8
55.0
66.2
66.8
66.9
62.3

55.3
54.8
53.7
64.0
64.9
64.5
58.2

53.1
52.9
52.9
61.4
61.7
61.8
50.6

53.0
52.3
51.4
59.3
60.5
59.6
50.5

51.6
50.5
51.0
57.9
58.8
58.3
53.8

51.3
50.4
51.8
55.5
56.6
55.8
59.6

51.4
51.2
51.4
53.6
54.3
54.0
57.9

49.7
49.3
49.4
52.5
55.1
53.8
57.4

49.7
49.6
49.6
52.0
53.5
52.3
48.7

48.6
48.6
48.7
49.7
50.9
49.8
47.6

47.2
47.2
48.5
48.3
49.6
48.3
46.2

45.3
45.5
46.9
48.9
49.0
48.6
45.0

43.7
43.9
45.4
48.1
48.2
48.2
44.2

41.1
41.3
42.5
47.2
46.8
46.8
43.5

38.6
38.8
40.1
46.7
46.9
45.9
44.5

35.9
36.1
37.0
44.7
44.7
43.2
49.4

33.2
33.3
34.4
43.9
43.6
41.9
54.3

62.8
62.7
63.2
63.4
62.0
60.7
62.6
63.0
64.1
65.4
64.7
64.5
63.3
61.6
65.1
67.0
64.3

67.5
64.7
64.6
65.0
63.7
61.7
61.4
61.7
61.3
62.1
63.8
63.3
64.5
65.5
70.0
71.3
71.1

67.8
71.4
60.9
67.2
61.6
62.1
58.7
64.1
61.1
62.1
63.7
64.8
66.0
66.9
77.3
74.5
74.4

65.3
66.8
65.3
64.2
62.8
61.0
57.9
62.4
62.3
62.5
64.0
64.7
67.4
69.0
74.6
77.8
73.0

66.9
68.4
63.4
62.9
63.3
61.2
60.1
63.2
61.2
63.4
64.0
66.6
68.3
69.5
74.4
75.4
72.5

65.2
62.9
60.1
59.1
58.0
57.0
54.8
58.8
56.8
58.1
60.9
61.0
65.4
67.6
71.7
74.1
70.7

62.0
61.7
58.1
56.3
53.9
53.5
55.2
59.6
58.3
54.8
57.0
59.2
62.1
63.8
68.7
70.9
67.9

62.6
60.3
57.9
55.5
54.2
52.2
56.3
57.9
58.0
57.6
60.7
59.3
59.1
58.9
64.9
65.5
65.5

56.9
55.2
54.7
53.1
51.8
49.4
51.3
54.1
53.9
54.5
55.3
56.3
56.3
56.2
60.5
62.5
62.5

53.8
52.8
52.2
51.6
50.7
50.5
51.6
55.5
54.2
52.9
54.2
56.1
54.9
53.1
57.9
61.1
59.5

52.0
53.1
52.3
53.5
51.1
51.5
52.0
55.6
57.2
53.7
56.5
61.4
59.0
52.8
57.3
62.1
59.0

51.2
50.9
50.7
49.4
48.8
48.4
51.7
56.4
53.9
51.2
51.7
53.2
52.1
50.6
53.8
56.1
57.6

52.3
51.5
54.1
51.1
50.4
49.3
53.0
57.0
54.7
51.0
52.8
52.1
51.8
51.4
55.1
67.3
62.2

52.4
51.4
50.6
50.2
50.0
49.4
52.1
55.8
52.8
49.6
51.0
51.5
50.7
49.7
54.1
55.4
58.3

51.9
51.7
50.4
50.2
49.1
48.2
50.6
53.4
51.0
50.3
51.1
57.3
55.1
50.2
54.8
55.6
57.9

51.2
50.6
51.2
50.1
50.8
50.8
53.9
55.0
51.0
50.9
52.0
52.0
50.9
49.3
52.8
54.4
56.5

50.1
50.5
50.6
49.6
48.8
48.8
52.3
52.9
50.7
49.3
51.7
51.5
50.4
48.9
52.1
54.0
55.9

53.4
54.0
55.1
55.0
52.9
55.0
57.3
57.8
54.7
50.5
54.1
55.0
52.7
47.5
50.2
51.8
55.5

48.8
50.5
51.7
52.1
50.5
51.0
54.1
54.5
51.6
51.3
53.6
53.7
51.5
46.6
48.2
49.8
53.1

50.3
51.4
52.7
52.6
50.9
52.5
55.5
56.2
52.1
51.2
53.5
54.0
51.7
46.8
47.5
49.0
52.0

50.4
52.8
54.3
54.3
50.2
52.8
55.6
55.0
51.0
50.7
53.1
54.0
51.6
45.7
46.0
47.8
50.5

51.1
54.4
55.0
54.7
50.0
53.2
57.1
55.3
51.4
51.2
55.2
55.1
52.7
46.6
44.9
46.3
49.6

46.8
50.7
50.7
52.4
46.3
49.0
52.3
51.8
50.3
50.5
53.5
53.9
51.5
45.5
43.3
44.4
46.8

44.8
48.7
50.0
52.1
44.8
48.0
50.9
50.9
49.2
49.0
52.0
53.0
50.5
43.9
42.0
42.9
45.5

41.0
43.9
46.6
48.0
41.5
44.7
47.2
48.1
46.3
46.7
50.0
50.2
47.6
40.0
43.8
44.6
44.2

(or 4m to BP11 and BP13)


65.5 56.2 58.7 62.4 60.3
63.1 54.2 56.1 57.9 57.1
66.7 56.8 57.9 63.5 57.8
61.0 55.4 53.8 57.4 52.7
64.7 61.2 62.5 65.1 60.0
63.3 58.1 58.6 58.3 57.1
65.9 57.7 59.0 56.8 53.9
64.0 56.1 61.3 65.9 67.3
62.6 54.3 62.9 64.0 67.5
67.3 56.6 59.0 62.6 56.9

61.7
58.9
57.7
54.3
61.7
57.3
54.7
66.8
68.3
56.4

59.0
54.7
56.0
48.1
59.2
55.4
50.3
62.1
62.7
54.4

56.3
50.5
52.5
44.1
55.5
54.0
46.4
56.2
56.0
53.2

51.8
43.3
50.5
41.5
53.6
53.7
44.0
48.4
44.2
50.8

48.1
35.8
45.2
40.7
49.1
49.4
39.7
43.4
34.8
47.5

45.3
33.5
41.5
40.8
46.7
46.7
36.9
41.0
34.9
45.8

42.7
36.3
37.4
42.9
45.1
41.8
34.7
38.6
38.3
42.0

40.3
37.7
32.3
43.5
44.4
38.4
32.2
33.6
38.5
37.7

42.3
39.3
31.0
43.3
42.1
37.1
32.3
35.8
40.8
38.7

39.4
39.5
34.4
41.0
42.1
41.3
34.7
39.0
42.0
40.7

37.4
39.0
39.0
40.5
43.1
42.7
35.9
40.0
41.4
42.6

36.4
38.1
40.8
40.5
45.6
43.9
39.0
39.2
41.5
43.0

34.2
35.0
40.1
38.0
44.5
46.0
37.6
38.8
38.9
41.3

36.3
34.9
40.0
37.3
45.4
44.8
40.0
36.3
36.2
46.2

36.1
33.4
38.0
35.7
44.8
44.6
39.7
35.1
35.1
43.2

35.8
32.7
37.7
34.5
44.6
43.2
38.5
33.9
34.0
43.1

34.5
31.1
36.0
32.4
44.5
40.4
39.3
32.9
32.8
43.6

34.0
29.9
35.4
30.3
43.6
40.3
40.0
30.9
31.4
41.9

31.9
27.4
33.4
26.8
41.9
37.7
35.2
28.0
28.7
38.1

29.4
24.5
31.2
23.3
38.6
35.2
33.6
25.5
26.7
35.7

25.4
21.6
27.4
20.6
34.5
32.3
29.0
24.2
25.5
30.5

In posi tion q there was an influance of a nearby (not relevant to the far fi eld) source outside the measurem ent line, so m easurement 23 is moved a bi t further from this source

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

32/61

5 k 6.3 k 8 k
dB
dB dB

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 4: Calculated indicative specific noise at evaluation points based on spectral Leq-levels
Meas.
number

f(Hz)
position

12
dB

16
dB

20
dB

25
dB

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

64.9
65.1
58.8
56.7
56.5
56.8
52.9
60.7
59.3
60.3

60.3
58.3
56.0
52.5
55.6
55.4
55.8
62.0
58.3
53.1

53.8
55.9
53.8
50.2
49.8
53.4
53.5
59.1
57.2
48.7

57.7
55.1
53.2
49.1
49.5
53.7
53.5
57.9
55.7
49.7

31
40
50
63
80
100
125
dB
dB
dB
dB
dB
dB
dB
Far field measurement of background at 1.5 m
58.1 51.4 50.8 54.7 49.2 49.3 46.9
52.4 51.0 50.0 50.8 46.5 46.2 42.0
51.1 50.6 49.9 50.9 46.7 45.4 41.3
49.0 49.9 49.3 49.2 46.4 48.9 41.9
47.9 48.0 48.0 49.0 45.7 41.8 31.3
53.7 51.8 47.8 47.6 44.8 40.2 37.0
53.3 51.5 50.5 48.9 46.1 45.6 39.2
56.5 56.3 55.5 54.2 52.3 51.8 46.2
53.9 51.3 47.0 43.3 38.5 38.1 36.8
48.7 49.1 47.6 41.0 35.6 41.6 42.7

8
6
4
3
2
1
11
9
5
7

32
29
28
26
25
24
31
30
27
33

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

65.2
60.4
58.4
59.1
55.3
59.9
73.3
63.4
57.6
64.2

65.8
68.0
65.1
62.3
62.2
64.9
71.5
63.8
64.0
65.6

62.4
57.8
57.1
57.1
54.5
59.3
68.9
60.8
56.0
60.6

61.3
58.2
59.0
60.6
62.3
59.4
67.1
59.5
56.6
59.3

65.7
61.9
62.6
65.5
66.1
61.8
62.9
57.1
59.0
58.5

63.0
58.0
60.5
66.0
67.3
58.5
61.8
57.8
57.6
55.5

69.2
60.0
63.3
65.8
67.9
61.4
65.5
61.9
59.3
54.5

63.2
58.8
60.2
60.1
60.7
54.5
56.1
56.3
55.3
49.7

63.8
57.9
57.1
53.8
53.9
54.8
54.7
55.8
50.5
46.3

52.5
50.9
52.2
46.2
43.9
48.4
47.1
51.9
42.4
41.4

Far field measurement during Base Load (420 MW)


47.5 45.4 43.0 42.0 42.3 40.3 42.2 41.8
50.6 45.0 37.4 34.6 34.3 36.8 41.1 41.1
51.8 47.7 41.1 37.6 37.1 34.5 35.2 35.7
42.6 39.9 37.5 35.5 36.6 38.8 40.1 39.3
34.6 34.0 37.5 38.9 41.0 41.8 40.9 38.2
47.2 43.0 39.2 37.2 38.0 37.8 39.1 40.7
43.0 40.2 38.5 37.8 38.7 38.7 40.5 41.4
46.9 44.2 40.4 38.2 38.9 41.0 43.1 46.0
38.4 38.4 40.2 40.6 41.3 38.8 37.5 36.7
41.1 41.4 44.1 42.0 41.3 39.5 40.2 38.6

42.5
40.4
36.5
38.0
37.7
40.2
40.2
46.5
35.2
36.9

42.9
39.3
37.0
36.7
36.2
41.8
38.7
43.8
35.0
36.8

41.5
37.0
35.2
35.0
34.7
37.7
37.8
42.3
33.0
35.4

40.5
36.1
32.5
33.1
32.7
38.4
36.8
41.5
31.0
33.5

33
31
29
27
26
25
35
34
30
32

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

69.1
64.4
62.7
58.4
57.3
58.5
57.1
56.7
60.3
61.7

64.3
66.8
66.9
60.3
63.2
61.3
66.3
60.7
64.9
60.1

62.2
58.1
57.0
56.6
54.7
58.4
60.6
59.6
54.9
55.2

61.9
58.0
60.0
59.1
60.6
59.4
59.5
59.8
57.1
54.7

64.6
63.6
63.5
67.3
63.7
61.4
59.3
56.8
58.3
58.5

61.7
57.7
59.3
64.6
65.2
57.0
56.0
59.8
56.6
52.5

72.5
61.8
61.5
65.1
66.4
63.8
65.2
64.3
59.8
54.6

61.9
56.8
59.1
59.9
61.0
53.3
53.5
54.8
55.0
48.0

55.2
53.6
56.1
54.5
53.8
50.8
46.3
52.7
50.3
42.1

Far
52.2
51.3
53.0
46.9
42.5
47.1
42.4
53.0
44.3
39.6

field measurement during full bypass with 100% GT Load


48.3 46.5 43.9 41.7 41.6 41.8 43.5 44.4
51.2 46.4 39.6 36.1 35.3 37.6 42.1 43.5
52.6 48.9 44.3 41.9 40.0 38.8 39.1 36.9
43.0 40.2 38.6 37.5 37.8 40.7 41.1 39.4
33.8 32.9 36.1 38.0 39.8 41.0 42.6 41.0
46.3 41.5 40.3 37.8 39.3 38.3 37.7 41.4
37.2 34.2 32.9 32.4 34.3 34.6 35.5 38.8
47.5 46.0 43.7 40.1 39.3 42.3 41.8 43.1
41.5 38.5 40.0 40.2 41.4 41.4 40.1 38.5
40.2 41.3 45.4 42.9 42.7 41.1 41.3 40.2

44.4
43.2
38.4
40.5
41.8
41.1
39.5
44.2
37.7
38.5

44.8
43.2
40.5
38.5
37.1
46.8
42.8
45.1
37.2
38.6

44.2
41.2
40.1
37.6
36.8
43.8
43.6
47.1
36.2
38.0

28
26
24
31
32
33
30
29
25
27

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

68.5
62.5
61.7
59.7
57.2
58.3
54.2
58.1
59.8
62.1

64.7
66.7
65.5
64.0
62.6
67.3
65.9
63.3
63.1
61.0

61.2
56.8
56.2
56.1
54.3
56.6
57.7
58.1
54.2
55.4

62.5
57.9
58.7
61.3
62.9
59.0
59.0
58.6
56.1
53.8

65.1
63.5
62.4
65.9
64.0
62.6
56.8
58.3
57.9
57.4

60.0
57.8
60.3
67.3
67.5
56.9
53.9
57.1
57.1
52.7

61.7
57.7
61.7
66.8
68.3
56.4
54.7
57.3
58.9
54.3

59.2
56.0
59.0
62.1
62.7
54.4
50.3
55.4
54.7
48.1

55.5
52.5
56.3
56.2
56.0
53.2
46.4
54.0
50.5
44.1

Far field measurement during simulated start up with 40% GT Load


53.6 49.1 46.7 45.1 44.4 42.1 42.1 43.1 45.6 44.5
50.5 45.2 41.5 37.4 32.3 31.0 34.4 39.0 40.8 40.1
51.8 48.1 45.3 42.7 40.3 42.3 39.4 37.4 36.4 34.2
48.4 43.4 41.0 38.6 33.6 35.8 39.0 40.0 39.2 38.8
44.2 34.8 34.9 38.3 38.5 40.8 42.0 41.4 41.5 38.9
50.8 47.5 45.8 42.0 37.7 38.7 40.7 42.6 43.0 41.3
44.0 39.7 36.9 34.7 32.2 32.3 34.7 35.9 39.0 37.6
53.7 49.4 46.7 41.8 38.4 37.1 41.3 42.7 43.9 46.0
43.3 35.8 33.5 36.3 37.7 39.3 39.5 39.0 38.1 35.0
41.5 40.7 40.8 42.9 43.5 43.3 41.0 40.5 40.5 38.0

45.4
40.0
36.3
36.3
36.2
46.2
40.0
44.8
34.9
37.3

44.8
38.0
36.1
35.1
35.1
43.2
39.7
44.6
33.4
35.7

SGS Belgium NV
Reportnumber : 11.0029-1-v6

160
200
250
dB
dB
dB
heigt (or 4m to BP11
46.2 44.8 43.2
40.1 39.8 38.2
39.2 39.5 36.4
42.0 40.1 38.4
31.5 37.5 39.3
38.7 40.7 41.0
37.9 35.5 34.4
44.8 42.8 39.9
38.9 41.9 41.8
44.0 47.3 43.1

25/09/2011
final report version 3

315
400
500
630
800
1 k 1.25 k 1.6 k
2k
dB
dB
dB
dB
dB
dB
dB
dB
dB
and BP13) during shut down of hole the station (so also transfo)
41.7 41.5 45.3 45.8 43.7 44.1 45.0 43.5 43.1
35.7 37.3 42.3 42.5 40.4 38.7 39.4 36.5 33.5
34.9 36.1 40.2 40.5 38.9 39.3 42.1 36.4 33.1
36.8 39.8 42.5 41.4 38.9 39.3 40.7 35.3 31.6
40.6 42.2 42.1 40.9 38.0 39.1 40.2 35.3 31.6
40.7 41.8 43.2 41.1 41.4 40.3 40.4 36.7 33.0
35.8 38.2 41.3 42.1 40.6 40.4 39.9 36.8 34.8
39.8 42.3 45.3 47.1 47.5 45.8 46.7 44.7 42.0
41.1 37.6 38.0 38.6 36.5 36.0 37.2 32.7 29.0
41.1 41.0 42.1 41.5 39.5 39.0 39.1 34.8 31.4

33/61

2.5 k 3.15 k
dB
dB

4k
dB

5k
dB

6.3 k
dB

8k
dB

10 k
dB

LAeq
dB(A)

41.2
30.6
29.5
27.4
28.4
29.6
31.1
39.9
24.8
27.1

39.5
26.9
24.9
23.1
26.2
25.2
30.0
36.7
21.6
23.1

35.5
24.1
22.5
21.3
25.1
22.7
37.8
32.9
20.7
20.6

30.1
22.8
21.9
21.5
24.9
22.5
30.1
27.7
20.7
19.7

26.2
23.0
22.2
21.7
24.9
22.3
26.8
23.6
20.8
19.9

24.2
22.4
23.1
22.1
25.3
22.5
26.2
22.2
21.3
20.4

23.2
23.8
24.9
23.5
26.3
23.4
26.8
22.5
22.5
21.1

53.6
48.1
47.9
47.9
47.8
48.8
48.8
54.5
45.4
48.1

40.2
34.1
31.0
31.3
30.9
37.3
34.5
40.2
28.7
31.3

38.5
31.9
28.3
28.8
29.1
35.6
32.3
37.8
25.8
29.3

36.4
29.3
25.9
27.0
27.8
35.5
30.7
35.8
22.9
27.8

34.5
26.7
23.2
24.8
26.0
31.6
29.1
32.5
20.6
26.8

32.4
24.7
21.6
24.2
24.7
26.1
28.3
29.6
20.1
25.8

28.3
23.6
21.0
24.4
24.0
24.1
27.6
26.8
20.1
24.9

27.5
23.5
21.3
24.9
23.6
24.3
27.2
25.7
20.4
24.5

27.9
24.6
22.0
26.3
24.3
25.8
28.7
26.2
21.1
24.6

51.9
48.2
46.3
46.7
47.1
49.1
48.3
52.6
44.7
46.4

42.5
39.7
37.0
35.5
34.8
45.5
42.5
44.5
33.5
35.5

42.6
38.5
35.1
33.2
32.7
46.0
40.9
41.4
31.2
33.5

41.4
38.1
34.5
32.8
32.5
45.8
43.0
40.4
29.6
32.0

38.6
34.5
30.2
27.6
28.8
41.2
37.2
39.0
25.0
26.7

36.8
32.5
26.7
25.2
26.6
37.5
34.5
36.0
22.0
23.0

34.5
28.8
25.2
24.4
25.7
32.6
30.6
33.3
20.1
21.0

30.3
26.6
30.0
24.4
26.4
26.9
27.0
28.1
19.8
20.5

29.1
26.0
23.6
24.9
25.5
23.8
26.6
23.3
20.2
20.7

29.5
26.4
26.9
25.6
25.7
24.3
27.5
23.5
21.0
21.6

53.7
51.0
49.0
48.0
48.4
54.5
51.5
53.8
46.5
47.8

44.6
37.7
35.8
33.9
34.0
43.1
38.5
43.2
32.7
34.5

44.5
36.0
34.5
32.9
32.8
43.6
39.3
40.4
31.1
32.4

43.6
35.4
34.0
30.9
31.4
41.9
40.0
40.3
29.9
30.3

41.9
33.4
31.9
28.0
28.7
38.1
35.2
37.7
27.4
26.8

38.6
31.2
29.4
25.5
26.7
35.7
33.6
35.2
24.5
23.3

34.5
27.4
25.4
24.2
25.5
30.5
29.0
32.3
21.6
20.6

31.5
24.8
22.7
24.3
25.9
27.6
25.5
29.0
20.3
20.0

29.5
23.8
21.1
23.6
25.4
22.7
23.3
25.1
20.2
20.3

28.9
24.0
21.7
22.7
24.4
22.3
23.9
24.0
20.8
21.0

54.6
48.3
47.2
47.2
48.1
53.1
49.0
53.2
45.1
47.1

Noise acceptance test Far Field T-Power Tessenderlo

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

53.4
#####
#####
55.4
#####
57.0
73.3
60.1
#####
61.9

64.4 61.8
67.5 53.3
64.5 54.4
61.8 56.1
61.1 52.7
64.4 58.0
71.4 68.8
59.1 55.9
62.6 #####
65.3 60.3

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

67.0 62.1 61.5


##### 66.1 54.1
60.4 66.5 54.2
53.5 59.5 55.5
49.6 62.4 53.0
53.6 60.0 56.7
55.0 65.9 59.7
##### #####
50.0
53.4 63.8 #####
56.1 59.1 54.1

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

66.0
#####
58.6
56.7
48.9
53.0
48.3
#####
50.2
57.4

62.7 60.3
66.0 49.5
65.0 52.5
63.7 54.8
61.6 52.4
67.0 53.8
65.5 55.6
57.4 #####
61.4 #####
60.2 54.4

58.8
55.3
57.7
60.3
62.1
58.0
66.9
54.4
49.3
58.8

Siemens NV Energy

extraction foreground "max. Base Load" with background measurements (without assumption of -7 dB for exeeding background levels)
64.9 62.7 69.1 62.5 63.6 49.7 38.6 ##### ##### ##### 33.4 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####
28.5 24.1 24.8 26.1
61.4 57.0 59.5 58.1 57.6 49.1 50.0 43.3 ##### ##### ##### ##### ##### ##### ##### 30.4 ##### ##### 25.2 26.0 25.6 23.2 20.2 14.7 17.0 16.9
62.3 60.0 63.1 59.7 56.7 51.2 51.4 47.0 36.0 31.4 33.1 ##### ##### ##### ##### ##### ##### ##### ##### #####
19.0 14.9 ##### ##### ##### #####
65.4 65.9 65.7 59.7 52.9 #####
34.3 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### 23.2 24.7 22.2 20.9 21.1 21.7 23.1
66.0 67.2 67.9 60.4 53.2 39.7 31.9 30.4 ##### ##### 30.4 ##### ##### ##### ##### ##### ##### ##### ##### 20.8 22.7 18.7 ##### ##### ##### #####
61.1 57.5 61.2 53.5 54.3 47.7 46.8 41.0 ##### ##### ##### ##### ##### ##### ##### 36.5 #####
33.5 35.3 34.3 35.1 31.0 23.6 19.4 19.6 22.1
62.4 61.4 65.4 55.2 54.1 41.8 40.7 36.3 35.5 35.1 35.6 29.1 ##### ##### ##### ##### ##### ##### ##### 26.1 22.4 ##### ##### 19.9 20.3 24.2
48.2 52.5 60.8 52.1 53.2 35.5 38.6 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####
25.1 24.0 23.1 23.8
57.4 56.4 59.0 55.0 50.2 40.4 33.3 ##### ##### ##### 27.8 32.6 ##### ##### ##### ##### ##### ##### ##### 18.9 17.0 ##### ##### ##### ##### #####
58.0 54.4 53.5 49.1 45.9 ##### ##### ##### ##### ##### 27.8 ##### ##### ##### ##### ##### ##### ##### ##### 25.3 26.0 25.6 24.6 23.2 22.4 22.0

extraction foreground "full bypass with 100% GT Load" with background measurements (without assumption of -7 dB for exeeding background levels)
59.8 63.5 61.3 72.5 61.0 53.9 49.1 42.7 34.7 ##### ##### ##### 30.0 ##### #####
36.1 36.5 ##### ##### ##### 27.9 ##### 30.9 32.5 28.2 27.4 28.3
54.9 63.3 56.7 61.5 55.5 52.7 49.7 50.6 45.2 ##### ##### ##### 25.8 ##### 36.6 40.0 41.3 36.5 36.9 36.8 37.2 33.7 31.8 27.5 24.1 23.5 22.9
59.0 63.2 58.7 61.2 58.4 55.6 52.2 52.3 48.4 42.6 40.5 38.4 35.5 ##### ##### ##### 34.3 #####
28.1 30.8 32.8 28.7 24.6 22.5 29.2 14.0 22.6
58.6 67.2 64.5 65.0 59.5 53.8 #####
36.5 ##### ##### ##### 30.9 33.4 ##### #####
35.4 ##### #####
22.0 28.1 31.3 25.7 22.9 21.3 21.1 21.7 21.4
60.2 63.6 65.1 66.3 60.7 53.1 34.2 30.2 27.3 ##### ##### ##### #####
33.0 24.6 39.5 ##### ##### ##### 26.2 30.4 25.3 21.3 18.0 21.1 12.0 #####
58.0 60.6 55.4 63.7 51.9 49.5 46.1 45.8 38.3 ##### ##### ##### ##### ##### 29.6 ##### 45.7 41.1 44.9 45.8 45.7 41.1 37.4 32.2 25.1 17.9 17.0
58.2 58.0 54.1 65.1 51.7 32.8 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### 39.1 41.2 41.1 39.7 42.7 36.3 #####
21.0 13.5 16.0 19.2
55.3 45.0 57.2 63.7 45.9 42.1 46.8 41.6 39.8 36.4 26.6 ##### ##### ##### ##### ##### ##### 36.5 ##### ##### 30.8 35.1 33.1 31.9 26.2 16.8 16.6
51.5 56.3 55.1 59.6 54.7 50.0 43.1 39.7 ##### ##### ##### 29.6 39.1 35.9 #####
31.5 31.0 #####
25.8 27.2 27.9 22.3 16.1 ##### ##### ##### #####
53.0 58.0 49.8 53.6 47.0 41.0 ##### ##### ##### ##### ##### 37.6 24.7 ##### ##### ##### ##### #####
27.2 29.3 30.3 24.2 19.3 15.1 11.6
8.9 12.0
extraction foreground "simulated start up with 40% GT Load" with background measurements (without assumption of -7 dB for exeeding background levels)
60.8 64.1 59.4 61.3 57.3 54.3 51.6 45.1 37.1 33.3 38.2 31.5 33.2 ##### #####
36.8 39.5 #####
38.1 38.9 39.9 38.2 35.7 32.5 30.0 28.0
54.7 63.1 56.8 56.9 54.4 51.2 48.5 42.4 35.9 ##### ##### ##### ##### ##### ##### ##### 34.1 #####
31.5 32.4 33.7 32.3 30.3 25.6 20.1 18.2
57.3 62.1 59.8 61.4 58.3 55.8 50.7 47.1 44.1 39.9 38.0 41.4 36.7 ##### ##### ##### ##### ##### ##### 28.9 32.1 30.9 28.4 22.8 13.1 #####
61.0 65.8 67.2 66.7 61.9 55.7 #####
38.1 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### 27.0 28.3 26.3 23.4 20.9 20.8 18.3
62.7 63.9 67.5 68.3 62.5 55.6 40.5 32.2 32.2 30.6 ##### 27.3 ##### ##### 32.6 31.6 ##### ##### ##### 26.6 28.4 25.1 21.6 16.6 19.0
9.0
57.5 62.0 55.3 55.8 53.4 52.5 50.4 47.1 44.9 36.1 ##### ##### ##### ##### 38.5 ##### 44.9 40.0 42.0 43.2 41.6 37.9 35.5 29.8 26.1
9.2
57.6 54.2 50.2 52.6 44.7 34.6 #####
30.1 ##### ##### ##### ##### ##### ##### ##### ##### ##### #####
33.6 37.4 39.4 33.6 ##### ##### ##### #####
50.3 53.6 49.4 52.6 49.2 49.1 49.2 46.6 42.2 ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### 29.7 30.8 31.3 30.5 27.5 22.0
45.5 55.7 55.8 58.6 54.4 50.2 41.7 ##### ##### ##### ##### ##### 35.0 32.1 ##### ##### ##### ##### ##### 26.9 28.3 26.1 22.2 14.3 ##### #####
51.7 56.8 50.2 53.3 47.2 43.4 ##### ##### ##### #####
32.9 39.3 ##### ##### ##### ##### ##### ##### ##### 25.5 27.5 24.4 20.0 13.3
3.6 #####

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

34/61

27.5
10.5
#####
#####
#####
#####
#####
18.7
#####
#####

Noise acceptance test Far Field T-Power Tessenderlo

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

53.4
53.4
51.4
55.4
48.3
57.0
73.3
60.1
50.6
61.9

64.4
67.5
64.5
61.8
61.1
64.4
71.4
59.1
62.6
65.3

61.8
53.3
54.4
56.1
52.7
58.0
68.8
55.9
49.0
60.3

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

67.0
57.4
60.4
53.5
49.6
53.6
55.0
49.7
53.4
56.1

62.1
66.1
66.5
59.5
62.4
60.0
65.9
53.7
63.8
59.1

61.5
54.1
54.2
55.5
53.0
56.7
59.7
50.0
47.9
54.1

BP3
BP4
BP5
BP6
BP7
BP8
BP9
BP10
BP11 (4m)
BP13 (4m)

66.0
55.5
58.6
56.7
48.9
53.0
48.3
51.1
50.2
57.4

62.7
66.0
65.0
63.7
61.6
67.0
65.5
57.4
61.4
60.2

60.3
49.5
52.5
54.8
52.4
53.8
55.6
51.1
47.2
54.4

58.8
55.3
57.7
60.3
62.1
58.0
66.9
54.4
49.3
58.8

Siemens NV Energy

extraction foreground "max. Base Load" with background measurements (with assumption of -7 dB for exeeding background levels)
64.9 62.7 69.1 62.5 63.6 49.7 38.6 38.4 36.0 35.0 33.4 33.3 35.2 34.8 35.5 35.9 34.5 33.5 33.2
61.4 57.0 59.5 58.1 57.6 49.1 50.0 43.3 30.4 27.6 27.3 29.8 34.1 34.1 33.4 30.4 30.0 29.1 25.2
62.3 60.0 63.1 59.7 56.7 51.2 51.4 47.0 36.0 31.4 33.1 27.5 28.2 28.7 29.5 30.0 28.2 25.5 24.0
65.4 65.9 65.7 59.7 52.9 39.2 34.3 32.9 30.5 28.5 29.6 31.8 33.1 32.3 31.0 29.7 28.0 26.1 24.3
66.0 67.2 67.9 60.4 53.2 39.7 31.9 30.4 30.5 31.9 30.4 34.8 33.9 31.2 30.7 29.2 27.7 25.7 23.9
61.1 57.5 61.2 53.5 54.3 47.7 46.8 41.0 32.2 30.2 31.0 30.8 32.1 33.7 33.2 36.5 30.7 33.5 35.3
62.4 61.4 65.4 55.2 54.1 41.8 40.7 36.3 35.5 35.1 35.6 29.1 33.5 34.4 33.2 31.7 30.8 29.8 27.5
48.2 52.5 60.8 52.1 53.2 35.5 38.6 37.2 33.4 31.2 31.9 34.0 36.1 39.0 39.5 36.8 35.3 34.5 33.2
57.4 56.4 59.0 55.0 50.2 40.4 33.3 31.4 33.2 33.6 27.8 32.6 30.5 29.7 28.2 28.0 26.0 24.0 21.7
58.0 54.4 53.5 49.1 45.9 34.4 34.1 34.4 37.1 35.0 27.8 32.5 33.2 31.6 29.9 29.8 28.4 26.5 24.3

31.5
26.0
21.3
23.2
20.8
34.3
26.1
30.8
18.9
25.3

29.4
25.6
19.0
24.7
22.7
35.1
22.4
28.8
17.0
26.0

extraction foreground "full bypass with 100% GT Load" with background measurements (with assumption of -7 dB for exeeding background levels)
59.8 63.5 61.3 72.5 61.0 53.9 49.1 42.7 34.7 36.9 34.7 34.6 30.0 36.5 37.4 36.1 36.5 37.2 35.5 35.6 27.9 31.6
54.9 63.3 56.7 61.5 55.5 52.7 49.7 50.6 45.2 32.6 29.1 28.3 25.8 35.1 36.6 40.0 41.3 36.5 36.9 36.8 37.2 33.7
59.0 63.2 58.7 61.2 58.4 55.6 52.2 52.3 48.4 42.6 40.5 38.4 35.5 32.1 29.9 31.4 34.3 33.1 28.1 30.8 32.8 28.7
58.6 67.2 64.5 65.0 59.5 53.8 39.9 36.5 33.2 31.6 30.5 30.9 33.4 34.1 32.4 35.4 31.5 30.6 22.0 28.1 31.3 25.7
60.2 63.6 65.1 66.3 60.7 53.1 34.2 30.2 27.3 29.1 31.0 32.8 34.0 33.0 24.6 39.5 30.1 29.8 27.8 26.2 30.4 25.3
58.0 60.6 55.4 63.7 51.9 49.5 46.1 45.8 38.3 33.3 30.8 32.3 31.3 30.7 29.6 34.1 45.7 41.1 44.9 45.8 45.7 41.1
58.2 58.0 54.1 65.1 51.7 32.8 35.4 30.2 27.2 25.9 25.4 27.3 27.6 28.5 31.8 32.5 39.1 41.2 41.1 39.7 42.7 36.3
55.3 45.0 57.2 63.7 45.9 42.1 46.8 41.6 39.8 36.4 26.6 32.3 35.3 34.8 36.1 37.2 38.1 36.5 37.5 34.4 30.8 35.1
51.5 56.3 55.1 59.6 54.7 50.0 43.1 39.7 31.5 33.0 33.2 29.6 39.1 35.9 31.5 31.5 31.0 29.2 25.8 27.2 27.9 22.3
53.0 58.0 49.8 53.6 47.0 41.0 32.6 33.2 34.3 38.4 35.9 37.6 24.7 34.3 33.2 31.5 31.6 31.0 27.2 29.3 30.3 24.2
extraction foreground "simulated start up with 40% GT Load" with background measurements (with assumption of -7 dB for exeeding background levels)
60.8 64.1 59.4 61.3 57.3 54.3 51.6 45.1 37.1 33.3 38.2 31.5 33.2 36.1 38.6 36.8 39.5 37.8 38.1 38.9 39.9 38.2
54.7 63.1 56.8 56.9 54.4 51.2 48.5 42.4 35.9 30.4 25.3 24.0 27.4 32.0 33.8 33.1 34.1 31.0 31.5 32.4 33.7 32.3
57.3 62.1 59.8 61.4 58.3 55.8 50.7 47.1 44.1 39.9 38.0 41.4 36.7 30.4 29.4 27.2 29.3 29.1 28.8 28.9 32.1 30.9
61.0 65.8 67.2 66.7 61.9 55.7 41.4 38.1 34.0 31.6 26.6 28.8 32.0 33.0 32.2 31.8 29.3 28.1 26.9 27.0 28.3 26.3
62.7 63.9 67.5 68.3 62.5 55.6 40.5 32.2 32.2 30.6 31.5 27.3 35.0 34.4 32.6 31.6 29.2 28.1 27.0 26.6 28.4 25.1
57.5 62.0 55.3 55.8 53.4 52.5 50.4 47.1 44.9 36.1 30.7 31.7 33.7 35.6 38.5 34.3 44.9 40.0 42.0 43.2 41.6 37.9
57.6 54.2 50.2 52.6 44.7 34.6 37.0 30.1 29.9 27.7 25.2 25.3 27.7 28.9 32.0 30.6 33.0 32.7 33.6 37.4 39.4 33.6
50.3 53.6 49.4 52.6 49.2 49.1 49.2 46.6 42.2 34.8 31.4 30.1 34.3 35.7 36.9 39.0 37.8 37.6 36.2 33.4 29.7 30.8
45.5 55.7 55.8 58.6 54.4 50.2 41.7 28.8 26.5 29.3 30.7 32.3 35.0 32.1 31.1 28.0 27.9 26.4 25.7 26.9 28.3 26.1
51.7 56.8 50.2 53.3 47.2 43.4 34.5 33.7 33.8 35.9 32.9 39.3 34.0 33.5 33.5 31.0 30.3 28.7 27.5 25.5 27.5 24.4

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

35/61

27.5
23.2
14.9
22.2
18.7
31.0
22.1
25.5
13.6
25.6

28.5
20.2
14.6
20.9
17.7
23.6
21.3
25.1
13.1
24.6

24.1
14.7
14.0
21.1
17.0
19.4
19.9
24.0
13.1
23.2

24.8
17.0
14.3
21.7
16.6
19.6
20.3
23.1
13.4
22.4

26.1
16.9
15.0
23.1
17.3
22.1
24.2
23.8
14.1
22.0

47.3
43.2
43.1
42.3
42.9
45.3
43.0
45.8
38.7
40.1

30.9
31.8
24.6
22.9
21.3
37.4
27.5
33.1
16.1
19.3

32.5
27.5
22.5
21.3
18.0
32.2
21.0
31.9
13.1
15.1

28.2
24.1
29.2
21.1
21.1
25.1
13.5
26.2
12.8
11.6

27.4
23.5
14.0
21.7
12.0
17.9
16.0
16.8
13.2
8.9

28.3
22.9
22.6
21.4
18.7
17.0
19.2
16.6
14.0
12.0

47.9
48.3
45.5
43.4
44.0
53.5
49.6
46.8
41.7
41.3

35.7
30.3
28.4
23.4
21.6
35.5
26.6
31.3
22.2
20.0

32.5
25.6
22.8
20.9
16.6
29.8
22.0
30.5
14.3
13.3

30.0
20.1
13.1
20.8
19.0
26.1
18.5
27.5
13.3
3.6

28.0
18.2
14.1
18.3
9.0
9.2
16.3
22.0
13.2
13.3

27.5
10.5
14.7
15.7
17.4
15.3
16.9
18.7
13.8
14.0

49.3
43.7
44.1
43.5
44.0
51.5
45.2
46.5
40.0
40.8

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 5: Calibration certificates noise measurement equipment

Attest wederzijdse kalibratie: LD 10


Deze wederzijdse kalibratie wordt jaarlijks uitgevoerd volgens WI_23 van
het kwaliteitssyteem van Departement 130. Het betreft een vergelijkende
kalibratie van de geluidsdrukmeter met het referentietoestel, aan de hand
van een omnidirectionele ruisbron in de meetruimte van SGS
environmental services.
Alle onderstaande geluidsdrukniveaus zijn gerefereerd t.o.v. 20 Pa.
Algemeen:
Locatie :
Datum :
Tijd :
Uitvoerder :
Achtergrondgeluid meetruimte: (LA95,5min)

Kelder
23/08/2010
11u. 40
BDW+JG
36.8 dB(A)

Ruisbron :
Merk :
Type :
SGS Code :

Brel & Kjaer


4296
Source 1

Calibrator :
Merk :
Type :
SGS Code :

Larson Davis
CA250
CAL1

Referentie meettoestel:

Merk
Type
SGS Code

Toestel
Larson Davis
824
LD9

Merk
Type
SGS Code

Microfoon
G.R.A.S.
26AK
MIC9

Calibratie referentie geluidsdrukmeter


L p calibrator
dB
114

SGS Belgium NV
Reportnumber : 11.0029-1-v6

Frequentie
Hz
250

L p gemeten
dB
113.8 (offset 46.07)

25/09/2011
final report version 3

Verschil
dB
0.2

36/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Attest wederzijdse kalibratie


Te calibreren geluidsdrukmeter

Merk
Type
SGS Code

Toestel
Larson Davis
824
LD10 / SN 1628

Kabel
Type
Serienummer

Merk
Type
SGS Code

Microfoon
G.R.A.S
26AK
MIC10

Kabel/Wind-en regenscherm
KAB10
Lemo
/

Calibratie geluidsdrukmeter zonder kabel


Lp calibrator
dB
114

Frequentie
Hz
250

Lp gemeten
dB
113.7 (offset: -45.58)

Verschil
dB
0.3

Vergelijking referentiemeter met geluidsdrukmeter zonder kabel


Karakteristiek
Lp Fast

Lp Slow

LAeq,30s

dB(A)
40
60
90
40
60
90
40
60
90

referentie
dB(A)
43.4
59.8
90.4
43.1
60.0
90.5
45.5
60.0
90.4

gemeten
dB(A)
43.9
60.0
90.8
43.8
60.1
90.7
46.1
60.3
90.7

Verschil
dB(A)
-0.5
-0.2
-0.4
-0.7
-0.1
-0.2
-0.6
-0.3
-0.3

Afgelezen ruisniveau zonder kabel


Ruisniveau (inclusief de microfoon): 19.6 dB(A) (gain op +20dB)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

37/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Attest wederzijdse kalibratie


Calibratie geluidsdrukmeter met kabel
L p calibrator
dB
113.8 (met
adapter SN420)

Frequentie
Hz
250

L p gemeten
dB
114 (offset: -45.71)

Verschil
dB
0.2

Vergelijking referentiemeter met geluidsdrukmeter met kabel


Karakteristiek
Lp Fast

Lp Slow

LAeq,30s

dB(A)
40
60
90
40
60
90
40
60
90

L p referentie
dB(A)
42.0
60.8
90.5
42.0
60.9
90.5
43.2
61.0
90.5

L p gemeten
dB(A)
42.2
60.7
90.2
41.7
60.7
90.4
43.4
60.9
90.4

Verschil
dB(A)
-0.2
0.1
0.3
0.3
0.2
0.1
-0.2
0.1
0.1

Afgelezen ruisniveau met kabel


Ruisniveau (inclusief de microfoon): 18.6 dB(A) (met gain op +20dB)

Besluit
De geluidsniveaumeter in orde bevonden : (ja / neen)
Ja
Verantwoording :
Minder dan 1 dB afwijking t.o.v. de aflezing van het
referentiemeettoestel
Afgelezen ruisniveau is lager dan 20 dB(A)
Opmerkingen : voor interne ruis steeds gain op +20dB

23/08/2010
De Winter Bert : .Erkend deskundige Geluid en Trillingen

1/3

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

38/61

Noise acceptance test Far Field T-Power Tessenderlo

SGS Belgium NV
Reportnumber : 11.0029-1-v6

Siemens NV Energy

25/09/2011
final report version 3

39/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 6: Overview Weather conditions during far field measurements


Back ground measurements from 12 till 13 April 2011
12 April 2011

13 April 2011

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

40/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Measurements from 27 till 28 May 2011 during Full bypass and 100% GT Load

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

41/61

Noise acceptance test Far Field T-Power Tessenderlo

SGS Belgium NV
Reportnumber : 11.0029-1-v6

Siemens NV Energy

25/09/2011
final report version 3

42/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Measurements from 28 till 29 May 2011 during maximum Base load (420 MW)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

43/61

Noise acceptance test Far Field T-Power Tessenderlo

SGS Belgium NV
Reportnumber : 11.0029-1-v6

Siemens NV Energy

25/09/2011
final report version 3

44/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Measurements from 13 till 14 June 2011 during simulated start up (40 % GT load)

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

45/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 7: Calculation LwA according ISO 3746 based on Leq-soundpressure levels near sources
f(Hz)
Source

12
dB

S_CT_1Outlet*
S_CT_Inlet-East
* mean of outlet of CT6, CT7 and CT8
correction background stack
S_Stack_foreground
S_Stack_Background

16
dB

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

80
dB

99.1 105.0 99.1 104.1 108.1 104.3 103.9 103.3 101.2


104.1 110.8 101.7 103.6 104.9 105.1 106.4 103.0 99.1

72.1
70.3

72.1
69.7

69.9
68.3

69.5
67.9

90.9
86.5
88.9
88.9

8k
dB

10 k
dB

LwA
dB(A)

67.1
68.6

63.8
73.1

61.8
78.1

60.2
80.9

59.0
82.4

88.6
88.8

79.8
75.4
77.8
77.8

78.9
73.2
77.5
77.5

79.6
74.1
78.1
78.1

80.1
72.4
79.3
79.3

79.2
70.5
78.5
78.5

76.8
68.7
76.0
76.0

73.6
66.7
72.6
72.6

71.2
64.2
70.2
70.2

67.1
60.4
66.0
66.0

64.0
56.7
63.1
63.1

60.2
51.9
59.5
59.5

56.4
47.7
55.8
55.8

53.1
46.3
52.0
52.0

88.8
83.4

S_Stack
from 1 outlet to 8 outlet of CT's
S_CoolingTower_1-Outlet
S_CoolingTower_8Outlets

79.1
76.2
76.0
76.0

99.1 105.0 99.1 104.1 108.1 104.3 103.9 103.3 101.2 96.9 92.3
108.2 114.0 108.1 113.1 117.1 113.4 112.9 112.4 110.2 105.9 101.3

88.7
97.7

86.4
95.4

84.1
93.2

83.3
92.3

82.2
91.2

79.1
88.1

77.4
86.4

77.6
86.6

76.5
85.5

73.3
82.4

72.1
81.1

72.1
81.1

69.9
78.9

69.5
78.5

67.1
76.1

63.8
72.8

61.8
70.8

60.2
69.2

59.0
68.0

88.6
97.6

from 1 inlet to 2 inlet


S_CoolingTower_Inlet-East
S_CoolingTower_BothInletsOf8CT

104.1 110.8 101.7 103.6 104.9 105.1 106.4 103.0 99.1


107.1 113.8 104.7 106.6 107.9 108.1 109.4 106.0 102.1

92.9
95.9

86.7
89.7

83.1
86.1

76.1
79.1

76.1
79.1

76.1
79.1

76.0
79.0

75.4
78.4

74.7
77.7

73.1
76.1

71.8
74.8

70.3
73.3

69.7
72.7

68.3
71.3

67.9
70.9

68.6
71.6

73.1
76.1

78.1
81.1

80.9
83.9

82.4
85.4

88.8
91.8

101.9 104.1
96.9 109.5

99.1 104.5 107.7 104.0 104.0 103.9 101.7


96.9 101.1 102.7 102.4 105.4 101.6 97.9

During Bypass with 100% GT load


97.3 93.1 89.6 87.1 84.4 83.2 82.4
92.0 86.3 85.3 82.1 74.0 75.0 76.2

79.6
81.4

77.1
77.1

78.0
78.3

76.2
72.1

73.7
70.5

72.7
68.9

72.5
68.2

71.1
66.9

69.8
66.3

67.5
67.3

64.8
72.7

62.7
77.5

61.0
80.1

60.0
81.7

88.9
88.5

97.2
94.6
93.6
93.6

90.7
86.0
88.8
88.8

from 1 inlet to 2 inlet


S_CoolingTower_Inlet-East
S_CoolingTower_BothInletsOf8CT

S_CoolingTower_Outlet*
S_CoolingTower_Inlet-East
* mean of outlet of CT6, CT7 and CT8
correction background stack
S_Stack_foreground
S_Stack_background
S_Stack
from 1 outlet to 8 outlet of CT's
S_CoolingTower_1-Outlet
S_CoolingTower_8Outlets
from 1 inlet to 2 inlet
S_CoolingTower_Inlet-East
S_CoolingTower_BothInletsOf8CT

98.2
93.4
96.4
96.4

93.1
90.0
90.2
90.2

73.3
71.8

6.3 k
dB

78.6
76.1
75.0
75.0

95.0 101.1 106.9


91.4 96.5 100.6
92.5 99.3 105.7
92.5 99.3 105.7

96.5
92.6
94.2
94.2

76.5
73.1

5k
dB

80.5
77.8
77.2
77.2

95.9
93.6
91.9
91.9

95.2 101.7 104.1


92.1 98.2 100.7
92.3 99.0 101.4
92.3 99.0 101.4

2.5 k 3.15 k 4 k
dB
dB
dB

80.8
78.0
77.5
77.5

S_Stack
from 1 outlet to 8 outlet of CT's
S_CoolingTower_1-Outlet
S_CoolingTower_8Outlets

95.8
93.5
91.8
91.8

2k
dB

83.2
81.1
78.9
78.9

97.3
94.7
93.9
93.9

97.7
95.5
93.7
93.7

1 k 1.25 k 1.6 k
dB
dB
dB

85.7
81.4
83.6
83.6

97.5
95.4
93.3
93.3

98.6
95.6
95.6
95.6

125 160 200 250 315 400 500 630 800


dB
dB
dB
dB
dB
dB
dB
dB
dB
During Base Load (420 MW)
96.9 92.3 88.7 86.4 84.1 83.3 82.2 79.1 77.4 77.6
92.9 87.9 86.7 83.1 76.1 76.1 76.1 76.0 75.4 74.7

87.5
83.2
85.5
85.5

S_CoolingTower_Outlet*
S_CoolingTower_Inlet-East
* mean of outlet of CT6, CT7 and CT8
correction background stack
S_Stack_foreground
S_Stack_background

98.9
96.5
95.1
95.1

100
dB

92.0
89.9
87.7
87.7

87.9
90.9

87.4

87.2
84.0
84.3
84.3

85.1
82.1
82.0
82.0

82.8
79.9
79.6
79.6

80.1
77.9
76.1
76.1

80.3
76.2
78.1
78.1

77.9
74.3
75.4
75.4

78.8
74.0
77.0
77.0

79.8
74.2
78.3
78.3

79.0
72.6
77.9
77.9

79.7
73.2
78.5
78.5

80.2
73.3
79.2
79.2

79.2
70.9
78.5
78.5

76.9
69.4
76.1
76.1

74.1
69.1
72.4
72.4

71.4
66.0
69.9
69.9

67.7
62.8
65.9
65.9

64.7
59.6
63.0
63.0

60.5
55.1
59.0
59.0

56.4
51.7
54.5
54.5

53.0
47.8
51.4
51.4

88.9
83.1

101.9 104.1 99.1 104.5 107.7 104.0 104.0 103.9 101.7 97.3 93.1
110.9 113.1 108.2 113.5 116.7 113.0 113.1 112.9 110.7 106.4 102.1

89.6
98.6

87.1
96.2

84.4
93.4

83.2
92.2

82.4
91.5

79.6
88.7

77.1
86.1

78.0
87.1

76.2
85.2

73.7
82.7

72.7
81.8

72.5
81.6

71.1
80.1

69.8
78.8

67.5
76.5

64.8
73.8

62.7
71.8

61.0
70.1

60.0
69.0

88.9
98.0

85.3
88.3

82.1
85.1

74.0
77.0

75.0
78.0

88.5
91.5

96.9 109.5
99.9 112.5

96.9 101.1 102.7 102.4 105.4 101.6 97.9


99.9 104.1 105.7 105.4 108.4 104.6 100.9

92.0
95.0

76.2
79.2

81.4
84.4

77.1
80.1

78.3
81.3

72.1
75.1

70.5
73.5

68.9
71.9

68.2
71.2

66.9
69.9

66.3
69.3

67.3
70.3

72.7
75.7

77.5
80.5

80.1
83.1

81.7
84.7

93.6 102.7
97.3 109.6

96.6 104.9 106.9 104.6 104.5 104.7 103.0


96.9 102.7 105.5 105.2 106.7 103.0 98.9

During Start Up with 40% GT load


98.5 94.3 90.7 88.6 85.7 83.9 82.5
92.3 87.9 86.9 82.8 75.2 75.1 78.4

80.1
84.2

78.1
82.5

78.0
82.0

76.8
73.3

74.3
72.2

72.9
70.8

72.9
69.6

72.3
68.8

71.0
68.1

70.6
69.1

68.4
74.0

67.3
78.9

65.8
82.0

65.0
84.1

89.8
90.8

90.2
87.7
86.5
86.5

103.7 102.9 100.8


101.0 100.8 99.4
100.4 98.7 95.2
100.4 98.7 95.2

97.7
97.2
88.0
88.0

95.5
95.8
88.5
88.5

98.2
95.9
94.3
94.3

94.8
92.8
90.4
90.4

86.7
85.3
81.1
81.1

86.7
84.7
82.4
82.4

86.3
89.3

87.7

83.4
79.4
81.2
81.2

79.9
77.1
76.7
76.7

77.2
75.8
71.4
71.4

75.1
75.0
58.7
58.7

74.8
73.5
68.8
68.8

73.2
73.1
56.0
56.0

73.0
73.9
66.0
66.0

73.4
73.5
66.4
66.4

71.6
71.5
55.4
55.4

71.8
71.7
52.4
52.4

70.7
70.8
63.7
63.7

69.3
70.6
62.3
62.3

67.5
69.0
60.5
60.5

65.9
67.5
58.9
58.9

63.3
64.6
56.3
56.3

60.8
62.2
53.8
53.8

58.1
59.1
51.1
51.1

55.4
56.5
48.4
48.4

52.1
53.2
45.1
45.1

48.4
50.0
41.4
41.4

81.6
81.5

93.6 102.7 96.6 104.9 106.9 104.6 104.5 104.7 103.0 98.5 94.3
102.7 111.8 105.6 113.9 115.9 113.6 113.6 113.7 112.0 107.6 103.3

90.7
99.8

88.6
97.6

85.7
94.8

83.9
93.0

82.5
91.5

80.1
89.1

78.1
87.1

78.0
87.1

76.8
85.8

74.3
83.3

72.9
81.9

72.9
82.0

72.3
81.3

71.0
80.1

70.6
79.7

68.4
77.4

67.3
76.4

65.8
74.8

65.0
74.0

89.8
98.9

97.3 109.6
100.3 112.6

86.9
89.9

82.8
85.8

75.2
78.2

75.1
78.1

78.4
81.4

84.2
87.2

82.5
85.5

82.0
85.0

73.3
76.3

72.2
75.2

70.8
73.8

69.6
72.6

68.8
71.8

68.1
71.1

69.1
72.1

74.0
77.0

78.9
81.9

82.0
85.0

84.1
87.1

90.8
93.8

96.9 102.7 105.5 105.2 106.7 103.0 98.9


99.9 105.7 108.5 108.2 109.7 106.0 101.9

SGS Belgium NV
Reportnumber : 11.0029-1-v6

92.3
95.3

87.9
90.9

25/09/2011
final report version 3

46/61

74.9

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 8: Calculation LwA according ISO 8297 based on Leq-soundpressure levels at plant boundary
Maximum Base load (420 MW)
f(Hz)
12
16
20
25
31
40
50
63
80
Pos.
d B d B d B d B d B dB dB dB dB
M ax B ase Load (420 MW) - night from 28 til l 29 Ma y 201 1
a
66.2 82.9 66.7 68.7 73.1 68.1 69.9 66.2 65.3
b
65.9 74.2 68.9 67.7 70.4 69.6 70.3 64.7 62.8
c
63.9 73.6 68.7 67.3 66.7 67.1 65.9 60.8 58.9
d
63.3 66.8 69.5 67.8 67.0 65.9 67.2 62.5 63.4
e
66.3 69.5 67.6 67.0 65.4 65.4 67.7 62.5 65.1
f
62.8 61.9 62.6 62.1 60.6 69.0 74.6 64.2 63.4
g
72.9 70.6 70.1 69.5 68.4 68.0 69.4 65.2 69.0
h
69.6 64.5 65.6 61.3 64.3 65.2 71.3 67.0 59.5
i
72.4 67.8 66.9 62.0 61.8 64.7 71.7 66.6 60.2
j
71.4 70.1 67.9 66.5 65.0 66.9 71.7 65.7 63.4
k
73.1 70.3 67.7 68.1 65.5 71.2 76.8 68.4 66.1
l
71.7 68.3 66.7 65.1 66.4 67.0 71.7 66.4 58.6
m
69.8 70.5 65.3 66.5 71.6 68.4 70.9 67.0 62.5
n
66.2 72.0 63.2 67.5 73.9 69.4 69.9 67.6 64.5
o
69.7 77.5 69.8 71.2 76.8 74.9 75.1 72.1 69.7
p
70.0 77.4 69.1 72.4 73.6 76.3 76.0 74.6 71.9
q
69.7 77.8 69.6 70.8 75.2 74.6 73.9 71.9 68.7
Corresponding background leve ls 1 2 to 13 April 2 011 .
a
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5
b
60.5 59.9 57.1 56.4 53.8 50.4 49.3 45.6 45.7
c
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5
d
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5
e
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5
f
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5
g
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9
h
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9
i
64.0 57.4 55.9 56.1 59.2 56.1 49.5 54.4 46.4
j
68.8 56.9 53.0 55.4 55.3 64.5 53.8 52.6 45.6
k
68.3 59.6 57.2 56.1 56.9 55.5 49.6 53.2 45.8
l
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2
m
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2
n
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2
o
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2
p
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2
q
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5

SGS Belgium NV
Reportnumber : 11.0029-1-v6

100
dB

125
dB

160
dB

200
dB

2 50 3 15 4 00 5 00 6 30 80 0
dB dB dB dB
dB
dB

1 k 1. 25 k 1. 6 k 2 k 2.5 k 3.1 5 k 4 k
dB
dB d B d B d B d B d B

60.5

59.4 56.7

54.8

51.8

57.1

54.0

51.9

51.8 50.2 51.3 47.2 47.0 48.1

46.2

44.6

59.4
56.4

60.1 55.2
60.8 53.1

56.3
51.9

51.1
49.8

55.1
53.1

52.1
49.5

49.6
49.0

49.7 49.2 51.8 48.1 48.5 50.5


49.8 48.7 53.0 48.4 49.6 51.9

48.0
49.4

47.2
50.2

57.6
54.9

57.0 52.3
55.7 51.2

52.9
56.2

50.0
49.2

51.5
51.5

50.6
49.2

50.6
48.9

50.6 49.1 54.3 48.9 51.2 52.8


50.8 49.6 54.8 49.4 49.8 51.0

50.2
47.7

52.6

51.5 49.9

54.1

48.3

50.7

48.8

47.9

49.1 47.5 53.0 48.4 49.8 52.6

58.3
58.8

55.8 53.6
52.8 52.7

57.1
56.0

50.4
54.0

51.6
55.0

49.8
54.3

49.0
51.7

51.8 49.9 55.7 51.3 52.0 55.0


54.1 50.2 58.7 51.1 55.0 55.0

57.2
57.2
60.6

53.1 52.8
52.2 52.2
54.6 53.7

54.3
52.0
54.0

51.8
49.6
51.8

53.5
51.9
53.1

51.7
50.0
52.3

50.6
50.4
50.1

60.5
62.3

56.1 56.1
59.3 56.5

60.9
58.6

52.0
51.9

52.7
55.1

53.1
54.2

63.5
69.1

61.1 56.8
67.9 64.7

53.2
57.4

51.8
57.2

56.7
61.8

73.8
71.3

67.7 63.4
63.8 62.8

60.2
60.7

56.3
59.0

47.3
47.6

46.1 44.7
47.1 46.2

44.8
44.8

48.2

47.1 46.6

48.2
48.2

47.1 46.6
47.1 46.6

48.2
54.4

5 k 6.3 k 8 k
dB dB dB

10 k
dB

LAeq
dB(A)

41.5

36.3

31.9

29.0

26.9

60.1

44.1
46.6

38.7
42.3

30.7
34.6

25.8
27.7

22.7
22.7

60.3
60.9

51.0
47.9

47.5
44.6

43.3
40.4

36.3
35.5

30.5
31.3

25.9
28.5

61.8
60.8

49.1

50.3

46.9

42.9

35.5

28.9

23.8

60.8

51.7
51.3

52.4
53.0

49.5
50.0

44.9
45.6

36.9
39.3

30.3
33.5

25.4
27.5

63.2
64.6

51.6 48.7 55.9 47.2 49.5 49.4


49.7 47.7 50.4 46.5 47.7 46.9
50.7 49.4 51.3 48.2 49.0 49.4

45.3
44.6
48.3

45.5
43.8
47.5

42.7
41.0
45.2

38.4
37.1
41.3

32.0
31.8
35.1

26.2
28.1
30.0

22.7
26.3
26.1

60.7
58.4
60.3

52.2
51.1

51.5 50.0 53.4 50.4 50.2 50.8


50.8 50.3 51.4 48.7 48.2 48.5

49.6
47.2

47.7
45.3

44.8
42.4

40.8
38.6

34.7
33.1

29.5
28.5

25.7
25.4

61.5
60.5

55.0
56.3

49.6
53.1

50.0 50.5 47.6 45.7 44.2 43.3


53.4 53.2 50.0 48.3 47.5 45.9

41.4
43.5

39.7
41.7

36.8
40.1

34.2
41.4

30.4
45.1

27.3
47.6

25.1
49.4

58.7
63.0

68.7
60.1

57.0
60.0

55.3
59.4

55.0 55.1 51.2 49.8 48.8 46.9


57.8 57.2 55.5 53.1 52.0 50.4

44.7
47.4

43.8
46.1

42.0
43.6

43.8
42.3

47.3
43.7

49.6
45.0

50.6
45.3

65.8
65.5

44.3
45.1

42.3
43.3

42.8
43.6

42.9
43.7

42.4 41.4 40.9 42.3 39.1 35.7


44.4 42.1 41.9 42.9 40.1 38.5

31.8
35.5

26.9
31.2

22.7
27.2

20.8
22.4

20.8
21.2

20.6
21.0

21.1
21.5

50.0
51.2

47.2

45.5

44.3

45.3

46.4

45.4 44.6 46.1 44.7 42.8 42.0

39.9

36.8

33.4

26.8

22.3

20.8

20.8

53.7

47.2
47.2

45.5
45.5

44.3
44.3

45.3
45.3

46.4
46.4

45.4 44.6 46.1 44.7 42.8 42.0


45.4 44.6 46.1 44.7 42.8 42.0

39.9
39.9

36.8
36.8

33.4
33.4

26.8
26.8

22.3
22.3

20.8
20.8

20.8
20.8

53.7
53.7

47.1 46.6
46.9 47.4

47.2
48.3

45.5
54.2

44.3
47.0

45.3
47.4

46.4
47.3

45.4 44.6 46.1 44.7 42.8 42.0


46.7 46.6 45.5 47.2 45.6 45.3

39.9
41.9

36.8
39.0

33.4
38.2

26.8
36.2

22.3
31.6

20.8
30.6

20.8
30.9

53.7
56.0

54.4
46.0

46.9 47.4
44.3 46.5

48.3
50.1

54.2
49.3

47.0
48.5

47.4
46.4

47.3
49.4

46.7 46.6 45.5 47.2 45.6 45.3


48.7 46.8 46.6 47.3 43.5 41.8

41.9
38.8

39.0
35.2

38.2
33.5

36.2
29.8

31.6
22.4

30.6
20.9

30.9
21.1

56.0
55.5

48.0
46.5
45.4

46.7 49.1
45.5 46.4
45.3 46.7

48.7
49.4
47.4

48.4
46.9
47.3

48.4
48.0
46.5

47.0
45.0
44.8

48.6
46.5
46.0

49.3 46.7 46.3 46.7 43.0 41.5


46.2 44.5 44.5 45.3 42.1 40.1
46.4 44.2 44.4 45.7 42.2 40.0

38.5
36.9
36.8

34.8
32.9
32.7

31.7
29.1
28.5

26.7
24.1
23.0

22.8
21.3
20.9

21.1
20.6
20.5

21.1
20.9
20.9

55.2
53.5
53.3

45.4
44.6

45.3 46.7
43.9 45.2

47.4
48.4

47.3
46.1

46.5
45.2

44.8
43.3

46.0
44.8

46.4 44.2 44.4 45.7 42.2 40.0


46.3 41.9 41.7 42.3 39.2 38.0

36.8
34.8

32.7
31.2

28.5
26.7

23.0
22.1

20.9
20.7

20.5
20.6

20.9
21.2

53.3
51.5

44.6
44.6

43.9 45.2
43.9 45.2

48.4
48.4

46.1
46.1

45.2
45.2

43.3
43.3

44.8
44.8

46.3 41.9 41.7 42.3 39.2 38.0


46.3 41.9 41.7 42.3 39.2 38.0

34.8
34.8

31.2
31.2

26.7
26.7

22.1
22.1

20.7
20.7

20.6
20.6

21.2
21.2

51.5
51.5

47.3

46.1 44.7

44.8

44.3

42.3

42.8

42.9

42.4 41.4 40.9 42.3 39.1 35.7

31.8

26.9

22.7

20.8

20.8

20.6

21.1

50.0

25/09/2011
final report version 3

47/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Max Base Load minus Background


a
64.8 82.9 66.6 68.4 73.1 68.1 69.9 66.2 65.2 60.3 59.2 56.4
54.3 50.9 57.0 53.7 51.3 51.3 49.6 50.9 45.5 46.2 47.8 46.0 44.5 41.4
b
64.4 74.0 68.6 67.4 70.3 69.5 70.3 64.6 62.7 59.1 59.9 54.6
56.0 49.8 54.8 51.4 48.3 48.2 48.3 51.3 46.5 47.8 50.2 47.7 47.1 44.0
61.5 73.5 68.6 67.1 66.6 67.0 65.8 60.7 58.7 55.7 60.6 52.0
50.1 47.8 52.5 47.4 45.5 47.8 46.6 52.0 46.0 48.6 51.4 48.9 50.0 46.4
c
d
60.4 66.1 69.4 67.6 66.9 65.8 67.2 62.5 63.3 57.1 56.5 50.9
51.5 48.1 50.6 49.1 48.5 49.0 47.2 53.6 46.8 50.5 52.4 49.8 50.8 47.3
e
65.1 69.1 67.5 66.8 65.3 65.3 67.7 62.5 65.1 53.9 55.1 49.4
55.6 46.8 50.6 46.9 45.3 49.3 47.9 54.2 47.6 48.8 50.4 46.9 47.5 44.3
f
59.3 59.3 62.2 61.3 60.2 69.0 74.6 64.2 63.3 50.6 49.5 47.2
53.1 45.1 49.6 46.2 42.6 46.7 44.4 52.0 46.0 48.8 52.2 48.5 50.1 46.7
g
72.8 70.4 70.0 69.4 68.3 67.8 69.4 65.0 69.0 56.0 55.2 52.4
56.5 #### 49.8 46.1 44.1 50.2 47.2 55.3 49.2 50.9 54.5 51.2 52.2 49.2
h
69.4 63.6 65.2 60.6 64.0 64.8 71.3 66.9 59.1 56.8 51.5 51.2
55.2 #### 54.3 53.3 49.7 53.2 47.7 58.5 48.8 54.5 54.5 50.8 52.8 49.7
i
71.7 67.4 66.5 60.7 58.3 64.1 71.7 66.3 60.0 56.9 52.5 51.6
52.2 48.2 51.8 50.2 44.4 48.5 44.2 55.4 #### 48.2 48.6 44.2 45.1 42.1
j
67.9 69.9 67.8 66.1 64.5 63.2 71.6 65.5 63.3 56.6 50.8 49.3
49.3 43.4 49.3 47.0 45.7 39.1 40.8 48.3 #### 45.9 45.4 43.4 43.2 40.5
k
71.4 69.9 67.3 67.8 64.9 71.1 76.8 68.3 66.1 60.4 54.0 52.8
52.2 50.1 51.5 51.4 47.6 48.8 47.7 50.3 45.1 48.0 48.9 48.0 47.3 45.1
69.9 67.5 66.1 64.2 66.0 66.7 71.7 66.3 58.4 60.4 55.7 55.6
60.7 50.2 51.5 52.4 51.0 49.9 48.7 52.8 48.6 49.5 50.4 49.4 47.6 44.7
l
m
66.5 70.1 64.4 65.8 71.5 68.2 70.9 66.9 62.4 62.2 59.1 56.0
58.2 50.1 54.5 53.6 49.5 48.9 49.0 50.4 45.6 46.9 47.8 46.8 45.1 42.2
n
62.5 71.7 61.7 67.1 73.9 69.3 69.9 67.6 64.4 63.4 61.0 56.5
51.5 50.4 56.4 54.7 47.9 47.6 49.9 46.3 43.0 42.5 41.8 40.3 39.0 36.4
o
68.4 77.4 69.5 71.1 76.8 74.9 75.1 72.1 69.7 69.1 67.9 64.7
56.8 56.8 61.7 56.1 52.4 52.5 52.9 49.3 47.0 46.8 45.1 42.9 41.3 39.9
p
68.8 77.3 68.8 72.3 73.6 76.3 76.0 74.6 71.9 73.8 67.7 63.3
59.9 55.9 68.7 56.8 54.9 54.4 54.9 50.7 48.9 48.3 46.3 44.2 43.6 41.9
q
69.1 77.8 69.5 70.6 75.2 74.6 73.9 71.9 68.7 71.3 63.7 62.7
60.6 58.9 60.0 59.9 59.3 57.7 57.1 55.3 52.7 51.8 50.3 47.3 46.0 43.6
For those levels where the background level is higher than signal level (level with max base load) a level of the signal level minus 7 dB is assumed
a
64.8 82.9 66.6 68.4 73.1 68.1 69.9 66.2 65.2 60.3 59.2 56.4 54.3 50.9 57.0 53.7 51.3 51.3 49.6 50.9 45.5 46.2 47.8 46.0 44.5 41.4
b
64.4 74.0 68.6 67.4 70.3 69.5 70.3 64.6 62.7 59.1 59.9 54.6 56.0 49.8 54.8 51.4 48.3 48.2 48.3 51.3 46.5 47.8 50.2 47.7 47.1 44.0
c
61.5 73.5 68.6 67.1 66.6 67.0 65.8 60.7 58.7 55.7 60.6 52.0 50.1 47.8 52.5 47.4 45.5 47.8 46.6 52.0 46.0 48.6 51.4 48.9 50.0 46.4
d
60.4 66.1 69.4 67.6 66.9 65.8 67.2 62.5 63.3 57.1 56.5 50.9 51.5 48.1 50.6 49.1 48.5 49.0 47.2 53.6 46.8 50.5 52.4 49.8 50.8 47.3
e
65.1 69.1 67.5 66.8 65.3 65.3 67.7 62.5 65.1 53.9 55.1 49.4 55.6 46.8 50.6 46.9 45.3 49.3 47.9 54.2 47.6 48.8 50.4 46.9 47.5 44.3
f
59.3 59.3 62.2 61.3 60.2 69.0 74.6 64.2 63.3 50.6 49.5 47.2 53.1 45.1 49.6 46.2 42.6 46.7 44.4 52.0 46.0 48.8 52.2 48.5 50.1 46.7
g
72.8 70.4 70.0 69.4 68.3 67.8 69.4 65.0 69.0 56.0 55.2 52.4 56.5 43.4 49.8 46.1 44.1 50.2 47.2 55.3 49.2 50.9 54.5 51.2 52.2 49.2
h
69.4 63.6 65.2 60.6 64.0 64.8 71.3 66.9 59.1 56.8 51.5 51.2 55.2 47.0 54.3 53.3 49.7 53.2 47.7 58.5 48.8 54.5 54.5 50.8 52.8 49.7
i
71.7 67.4 66.5 60.7 58.3 64.1 71.7 66.3 60.0 56.9 52.5 51.6 52.2 48.2 51.8 50.2 44.4 48.5 44.2 55.4 40.2 48.2 48.6 44.2 45.1 42.1
j
67.9 69.9 67.8 66.1 64.5 63.2 71.6 65.5 63.3 56.6 50.8 49.3 49.3 43.4 49.3 47.0 45.7 39.1 40.8 48.3 39.5 45.9 45.4 43.4 43.2 40.5
k
71.4 69.9 67.3 67.8 64.9 71.1 76.8 68.3 66.1 60.4 54.0 52.8 52.2 50.1 51.5 51.4 47.6 48.8 47.7 50.3 45.1 48.0 48.9 48.0 47.3 45.1
l
69.9 67.5 66.1 64.2 66.0 66.7 71.7 66.3 58.4 60.4 55.7 55.6 60.7 50.2 51.5 52.4 51.0 49.9 48.7 52.8 48.6 49.5 50.4 49.4 47.6 44.7
m
66.5 70.1 64.4 65.8 71.5 68.2 70.9 66.9 62.4 62.2 59.1 56.0 58.2 50.1 54.5 53.6 49.5 48.9 49.0 50.4 45.6 46.9 47.8 46.8 45.1 42.2
n
62.5 71.7 61.7 67.1 73.9 69.3 69.9 67.6 64.4 63.4 61.0 56.5 51.5 50.4 56.4 54.7 47.9 47.6 49.9 46.3 43.0 42.5 41.8 40.3 39.0 36.4
o
68.4 77.4 69.5 71.1 76.8 74.9 75.1 72.1 69.7 69.1 67.9 64.7 56.8 56.8 61.7 56.1 52.4 52.5 52.9 49.3 47.0 46.8 45.1 42.9 41.3 39.9
p
68.8 77.3 68.8 72.3 73.6 76.3 76.0 74.6 71.9 73.8 67.7 63.3 59.9 55.9 68.7 56.8 54.9 54.4 54.9 50.7 48.9 48.3 46.3 44.2 43.6 41.9
q
69.1 77.8 69.5 70.6 75.2 74.6 73.9 71.9 68.7 71.3 63.7 62.7 60.6 58.9 60.0 59.9 59.3 57.7 57.1 55.3 52.7 51.8 50.3 47.3 46.0 43.6

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

48/61

36.2 31.5 28.3 25.6


38.6 30.2 24.1 16.5
42.2 34.3 26.7 18.2
43.2 36.1 30.0 24.3
40.2 35.3 30.9 27.7
42.8 35.3 28.2 20.8
44.3 35.4 #### ####
45.1 38.5 30.4 ####
37.8 31.5 24.7 17.6
36.7 31.2 27.1 24.7
41.2 34.9 29.5 24.5
40.7 34.5 28.9 24.0
38.5 32.8 27.8 23.5
33.9 29.9 26.3 22.8
41.3 45.1 47.6 49.4
43.8 47.3 49.6 50.6
42.3 43.7 45.0 45.3

36.2
38.6
42.2
43.2
40.2
42.8
44.3
45.1
37.8
36.7
41.2
40.7
38.5
33.9
41.3
43.8
42.3

31.5
30.2
34.3
36.1
35.3
35.3
35.4
38.5
31.5
31.2
34.9
34.5
32.8
29.9
45.1
47.3
43.7

28.3
24.1
26.7
30.0
30.9
28.2
23.3
30.4
24.7
27.1
29.5
28.9
27.8
26.3
47.6
49.6
45.0

25.6
16.5
18.2
24.3
27.7
20.8
18.4
20.5
17.6
24.7
24.5
24.0
23.5
22.8
49.4
50.6
45.3

Noise acceptance test Far Field T-Power Tessenderlo

Copy values
a
64.8
b
64.4
c
61.5
d
60.4
e
65.1
f
59.3
g
72.8
h
69.4
i
71.7
j
67.9
k
71.4
l
69.9
m
66.5
n
62.5
o
68.4
p
68.8
q
69.1

82.9
74.0
73.5
66.1
69.1
59.3
70.4
63.6
67.4
69.9
69.9
67.5
70.1
71.7
77.4
77.3
77.8

66.6
68.6
68.6
69.4
67.5
62.2
70.0
65.2
66.5
67.8
67.3
66.1
64.4
61.7
69.5
68.8
69.5

68.4
67.4
67.1
67.6
66.8
61.3
69.4
60.6
60.7
66.1
67.8
64.2
65.8
67.1
71.1
72.3
70.6

73.1
70.3
66.6
66.9
65.3
60.2
68.3
64.0
58.3
64.5
64.9
66.0
71.5
73.9
76.8
73.6
75.2

68.1
69.5
67.0
65.8
65.3
69.0
67.8
64.8
64.1
63.2
71.1
66.7
68.2
69.3
74.9
76.3
74.6

Siemens NV Energy

69.9
70.3
65.8
67.2
67.7
74.6
69.4
71.3
71.7
71.6
76.8
71.7
70.9
69.9
75.1
76.0
73.9

66.2
64.6
60.7
62.5
62.5
64.2
65.0
66.9
66.3
65.5
68.3
66.3
66.9
67.6
72.1
74.6
71.9

65.2
62.7
58.7
63.3
65.1
63.3
69.0
59.1
60.0
63.3
66.1
58.4
62.4
64.4
69.7
71.9
68.7

60.3
59.1
55.7
57.1
53.9
50.6
56.0
56.8
56.9
56.6
60.4
60.4
62.2
63.4
69.1
73.8
71.3

59.2
59.9
60.6
56.5
55.1
49.5
55.2
51.5
52.5
50.8
54.0
55.7
59.1
61.0
67.9
67.7
63.7

56.4
54.6
52.0
50.9
49.4
47.2
52.4
51.2
51.6
49.3
52.8
55.6
56.0
56.5
64.7
63.3
62.7

Step 1: L p = mean level on measurement line


68.3 74.6 67.6 67.8 70.8 70.3 72.4 68.2 65.9 65.2 61.1 57.7

25.6
16.5
18.2
24.3
27.7
20.8
18.4
20.5
17.6
24.7
24.5
24.0
23.5
22.8
49.4
50.6
45.3

LpA
59.8
59.8
60.1
61.1
60.0
60.0
62.5
64.0
59.3
55.8
59.5
60.9
59.5
58.0
62.8
65.9
65.4

56.3 51.9 58.8 53.4 51.1 51.1 50.3 53.2 47.3 49.3 50.4 47.7 48.1 45.1 41.4 39.4 40.5 41.5

61.6

54.3
56.0
50.1
51.5
55.6
53.1
56.5
55.2
52.2
49.3
52.2
60.7
58.2
51.5
56.8
59.9
60.6

50.9
49.8
47.8
48.1
46.8
45.1
43.4
47.0
48.2
43.4
50.1
50.2
50.1
50.4
56.8
55.9
58.9

57.0
54.8
52.5
50.6
50.6
49.6
49.8
54.3
51.8
49.3
51.5
51.5
54.5
56.4
61.7
68.7
60.0

53.7
51.4
47.4
49.1
46.9
46.2
46.1
53.3
50.2
47.0
51.4
52.4
53.6
54.7
56.1
56.8
59.9

51.3
48.3
45.5
48.5
45.3
42.6
44.1
49.7
44.4
45.7
47.6
51.0
49.5
47.9
52.4
54.9
59.3

51.3
48.2
47.8
49.0
49.3
46.7
50.2
53.2
48.5
39.1
48.8
49.9
48.9
47.6
52.5
54.4
57.7

49.6
48.3
46.6
47.2
47.9
44.4
47.2
47.7
44.2
40.8
47.7
48.7
49.0
49.9
52.9
54.9
57.1

50.9
51.3
52.0
53.6
54.2
52.0
55.3
58.5
55.4
48.3
50.3
52.8
50.4
46.3
49.3
50.7
55.3

45.5
46.5
46.0
46.8
47.6
46.0
49.2
48.8
40.2
39.5
45.1
48.6
45.6
43.0
47.0
48.9
52.7

46.2
47.8
48.6
50.5
48.8
48.8
50.9
54.5
48.2
45.9
48.0
49.5
46.9
42.5
46.8
48.3
51.8

47.8
50.2
51.4
52.4
50.4
52.2
54.5
54.5
48.6
45.4
48.9
50.4
47.8
41.8
45.1
46.3
50.3

46.0
47.7
48.9
49.8
46.9
48.5
51.2
50.8
44.2
43.4
48.0
49.4
46.8
40.3
42.9
44.2
47.3

44.5
47.1
50.0
50.8
47.5
50.1
52.2
52.8
45.1
43.2
47.3
47.6
45.1
39.0
41.3
43.6
46.0

Step 2: differance between highest level in position p (65.9 dB(A)) and lowest level in position j (55.8 dB(A)) is > 10 dB(A)
If the 1/3 octave level in the measurement position x is 5 dB higher than the mean 1/3 octave level Lp, replace that level by the level Lp + 5 dB
a
64.8 79.6 66.6 68.4 73.1 68.1 69.9 66.2 65.2 60.3 59.2 56.4 54.3 50.9 57.0 53.7 51.3 51.3 49.6 50.9 45.5 46.2 47.8 46.0 44.5
b
64.4 74.0 68.6 67.4 70.3 69.5 70.3 64.6 62.7 59.1 59.9 54.6 56.0 49.8 54.8 51.4 48.3 48.2 48.3 51.3 46.5 47.8 50.2 47.7 47.1
c
61.5 73.5 68.6 67.1 66.6 67.0 65.8 60.7 58.7 55.7 60.6 52.0 50.1 47.8 52.5 47.4 45.5 47.8 46.6 52.0 46.0 48.6 51.4 48.9 50.0
d
60.4 66.1 69.4 67.6 66.9 65.8 67.2 62.5 63.3 57.1 56.5 50.9 51.5 48.1 50.6 49.1 48.5 49.0 47.2 53.6 46.8 50.5 52.4 49.8 50.8
e
65.1 69.1 67.5 66.8 65.3 65.3 67.7 62.5 65.1 53.9 55.1 49.4 55.6 46.8 50.6 46.9 45.3 49.3 47.9 54.2 47.6 48.8 50.4 46.9 47.5
f
59.3 59.3 62.2 61.3 60.2 69.0 74.6 64.2 63.3 50.6 49.5 47.2 53.1 45.1 49.6 46.2 42.6 46.7 44.4 52.0 46.0 48.8 52.2 48.5 50.1
g
72.8 70.4 70.0 69.4 68.3 67.8 69.4 65.0 69.0 56.0 55.2 52.4 56.5 43.4 49.8 46.1 44.1 50.2 47.2 55.3 49.2 50.9 54.5 51.2 52.2
h
69.4 63.6 65.2 60.6 64.0 64.8 71.3 66.9 59.1 56.8 51.5 51.2 55.2 47.0 54.3 53.3 49.7 53.2 47.7 58.2 48.8 54.3 54.5 50.8 52.8
i
71.7 67.4 66.5 60.7 58.3 64.1 71.7 66.3 60.0 56.9 52.5 51.6 52.2 48.2 51.8 50.2 44.4 48.5 44.2 55.4 40.2 48.2 48.6 44.2 45.1
j
67.9 69.9 67.8 66.1 64.5 63.2 71.6 65.5 63.3 56.6 50.8 49.3 49.3 43.4 49.3 47.0 45.7 39.1 40.8 48.3 39.5 45.9 45.4 43.4 43.2
k
71.4 69.9 67.3 67.8 64.9 71.1 76.8 68.3 66.1 60.4 54.0 52.8 52.2 50.1 51.5 51.4 47.6 48.8 47.7 50.3 45.1 48.0 48.9 48.0 47.3
l
69.9 67.5 66.1 64.2 66.0 66.7 71.7 66.3 58.4 60.4 55.7 55.6 60.7 50.2 51.5 52.4 51.0 49.9 48.7 52.8 48.6 49.5 50.4 49.4 47.6
m
66.5 70.1 64.4 65.8 71.5 68.2 70.9 66.9 62.4 62.2 59.1 56.0 58.2 50.1 54.5 53.6 49.5 48.9 49.0 50.4 45.6 46.9 47.8 46.8 45.1
n
62.5 71.7 61.7 67.1 73.9 69.3 69.9 67.6 64.4 63.4 61.0 56.5 51.5 50.4 56.4 54.7 47.9 47.6 49.9 46.3 43.0 42.5 41.8 40.3 39.0
o
68.4 77.4 69.5 71.1 75.8 74.9 75.1 72.1 69.7 69.1 66.1 62.7 56.8 56.8 61.7 56.1 52.4 52.5 52.9 49.3 47.0 46.8 45.1 42.9 41.3
p
68.8 77.3 68.8 72.3 73.6 75.3 76.0 73.2 70.9 70.2 66.1 62.7 59.9 55.9 63.8 56.8 54.9 54.4 54.9 50.7 48.9 48.3 46.3 44.2 43.6
q
69.1 77.8 69.5 70.6 75.2 74.6 73.9 71.9 68.7 70.2 63.7 62.7 60.6 56.9 60.0 58.4 56.1 56.1 55.3 55.3 52.3 51.8 50.3 47.3 46.0

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

49/61

41.4
44.0
46.4
47.3
44.3
46.7
49.2
49.7
42.1
40.5
45.1
44.7
42.2
36.4
39.9
41.9
43.6

41.4
44.0
46.4
47.3
44.3
46.7
49.2
49.7
42.1
40.5
45.1
44.7
42.2
36.4
39.9
41.9
43.6

36.2
38.6
42.2
43.2
40.2
42.8
44.3
45.1
37.8
36.7
41.2
40.7
38.5
33.9
41.3
43.8
42.3

36.2
38.6
42.2
43.2
40.2
42.8
44.3
45.1
37.8
36.7
41.2
40.7
38.5
33.9
41.3
43.8
42.3

31.5
30.2
34.3
36.1
35.3
35.3
35.4
38.5
31.5
31.2
34.9
34.5
32.8
29.9
45.1
47.3
43.7

31.5
30.2
34.3
36.1
35.3
35.3
35.4
38.5
31.5
31.2
34.9
34.5
32.8
29.9
44.4
44.4
43.7

28.3
24.1
26.7
30.0
30.9
28.2
23.3
30.4
24.7
27.1
29.5
28.9
27.8
26.3
47.6
49.6
45.0

28.3
24.1
26.7
30.0
30.9
28.2
23.3
30.4
24.7
27.1
29.5
28.9
27.8
26.3
45.5
45.5
45.0

25.6
16.5
18.2
24.3
27.7
20.8
18.4
20.5
17.6
24.7
24.5
24.0
23.5
22.8
46.5
46.5
45.3

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Step 3: Lp = mean of corrigated levels (step 2) on measurement line


68.3 73.6 67.6 67.8 70.6 70.1 72.4 67.9 65.7 63.7 60.2 57.1

56.3 51.4 56.6 53.0 50.2 50.8 49.9 53.1 47.3 49.2 50.4 47.7 48.1 45.1 41.4 38.3 38.1 38.7

Step 4: calculation surface factor Ls = 10xLOG ((2xSm + h.l)/So)


with Sm = measuring surface = 170x182 =
h = meausuring hight =
l = lenght off measuring line = 2x170+2x182 =
So = reference surface =

m
7 m
704 m
1 m

48.2

30940

Step 5: calculation near field factor L F = LOG ((d/(4x?Sp))


with d = mean measurement distance between Sm and Sp
51.8 m
Sp = source surface = ground surface of rectangle around UMC+UHA+UMX+ULA+UBF = 45 x 143m
6435 m

-0.792

Step 6: calculation microphone factor LM = 0


LM = 0 because of the use of a omnidirectional microphone
Step 7: calculation air absorption factor L = 0.5 x a lu x ?Sm
with Sm = measuring surface = 200x191 =
38200 m
alu = air absorption according to ISO 9613-1 51993) at 70% relative humidity and 10C according to guide line Emola Begis LNE (Flanders environmental legislation)
12
16
20
25
31
40
50
63
80 100 125 160 200 250 315 400 500 630 800 1 k 1.25 k 1.6 k 2 k 2.5 k 3.15 k 4 k 5 k 6.3 k 8 k 10 k
dB/km

0.079

0.079

0.079

0.079

0.079

0.079

0.079

0.122

0.186

0.280

0.411

0.584

0.797

1.040

1.310

1.600

1.930

2.330

2.870

3.660

4.860

6.730

9.66

14.30

21.50

32.80

50.20

76.90

117.00

175.00

dB/m

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.001

0.001

0.001

0.001

0.002

0.002

0.002

0.003

0.004

0.005

0.007

0. 010

0.014

0.022

0.033

0.050

0.077

0.117

0.175

80
dB

100 125 160


dB dB dB

200
dB

250 315 400 500 630 800


dB dB dB dB dB dB

5 k 6.3 k 8 k
dB dB dB

10 k
dB

LwA
dB(A)

98.9 104.0 100.5 97.6 98.2 97.3 100.5 94.7 96.7 97.9 95.2 95.6 92.5 88.9 85.9 85.7 86.3

108.7

Step 8: calculation LwA = Lp + Ls + LF + LM + L


LwA

12
dB

16
dB

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

115.7 121.1 115.1 115.3 118.1 117.6 119.9 115.3 113.2 111.2 107.6 104.5

SGS Belgium NV
Reportnumber : 11.0029-1-v6

103.8

25/09/2011
final report version 3

1 k 1.25 k 1.6 k 2 k 2.5 k 3.15 k 4 k


dB dB dB dB dB dB dB

50/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Steam turbine Full bypass operation and 100% GT load


f(Hz)
12
16
20
25
31
40
50
63
80 100
Pos.
dB dB dB dB dB dB dB dB dB dB
Bypass (with 100 GT load) - night from 27 till 28 May 2011
a
63.3 72.9 64.9 68.1 69.9 65.6 68.7 65.3 63.1 59.3
b
64.8 70.0 68.5 66.0 69.1 67.2 68.0 63.3 60.9 60.6
c
65.0 70.0 68.4 65.5 68.1 65.9 67.8 61.0 58.5 58.0
d
64.4 62.6 69.8 67.0 66.4 65.4 73.4 61.1 57.5 58.2
62.3 65.7 65.6 65.4 63.5 63.8 70.5 61.9 56.7 54.7
e
f
63.6 63.8 63.7 61.5 60.8 62.3 69.0 60.1 55.2 54.9
67.6 62.3 63.7 63.0 60.4 61.2 70.7 60.7 59.1 57.2
g
h
70.5 64.4 66.3 62.6 64.4 65.7 79.0 68.7 57.1 58.0
i
74.4 65.4 66.1 61.6 61.2 63.3 72.9 67.6 57.2 58.4
j
71.3 66.2 64.3 62.9 65.2 63.6 73.4 64.1 55.9 59.0
k
75.2 68.1 66.3 65.4 65.5 69.6 82.4 68.8 59.0 62.3
l
73.4 67.0 66.0 62.9 63.2 66.0 75.8 65.8 57.7 61.2
m
71.4 68.7 64.7 64.3 69.4 67.8 73.8 66.3 62.1 61.0
n
67.7 69.9 62.9 65.3 71.9 69.1 69.8 66.7 64.3 60.8
o
68.5 74.7 68.7 70.6 77.7 74.1 74.9 71.6 69.1 68.0
p
69.1 80.0 68.9 71.0 78.9 76.1 75.5 73.1 71.0 70.4
q
68.9 73.8 69.4 72.4 74.8 73.3 73.0 70.9 69.0 70.2
Corresponding background levels 12 to 13 April 2011.
a
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5 47.3
b
60.5 59.9 57.1 56.4 53.8 50.4 49.3 45.6 45.7 47.6
c
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
d
e
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
f
g
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9 54.4
h
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9 54.4
i
64.0 57.4 55.9 56.1 59.2 56.1 49.5 54.4 46.4 46.0
j
68.8 56.9 53.0 55.4 55.3 64.5 53.8 52.6 45.6 48.0
k
68.3 59.6 57.2 56.1 56.9 55.5 49.6 53.2 45.8 46.5
l
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2 45.4
m
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2 45.4
n
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
o
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
p
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
q
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5 47.3

SGS Belgium NV
Reportnumber : 11.0029-1-v6

125 160
dB dB

200
dB

250 315 400 500 630 800


dB dB dB dB dB dB

57.0

54.7

53.1

57.7
56.3

55.3
52.8

54.1
53.3

56.2
54.2

52.3
51.5

50.2
53.9

1 k 1.25 k 1.6 k 2 k 2.5 k 3.15 k 4 k


dB dB dB dB dB dB dB

5 k 6.3 k 8 k
dB dB dB

10 k
dB

LAeq
dB(A)

51.7 52.1 51.6 51.3 51.5 51.2 54.2 51.7 53.0 53.0 53.9 49.5 47.3

41.9

36.2

31.5

28.2

62.8

51.7 52.7 52.2 53.3 52.5 52.4 57.5 53.9 54.9 55.7 56.7 54.8 51.2
50.3 51.0 50.6 50.6 53.2 51.9 59.4 54.9 55.9 56.2 56.2 52.3 50.9

45.1
46.1

39.4
42.2

32.8
37.4

28.0
31.7

65.4
65.6

53.5
54.3

50.1 50.7 50.9 51.5 52.5 52.3 59.8 55.5 56.8 57.0 58.8 54.5 53.9
49.0 52.1 49.5 49.3 52.1 50.3 54.7 52.6 52.6 51.4 52.5 47.5 45.1

49.0
41.1

43.9
36.4

38.7
31.7

33.5
27.7

66.8
62.1

50.5

51.0

48.3 49.5 48.8 49.1 51.0 50.5 56.4 54.3 56.5 55.5 54.4 50.7 48.6

45.8

42.1

34.6

28.4

64.3

52.1

53.6

51.0 55.3 52.7 50.6 54.0 53.9 59.6 57.2 57.8 57.3 58.3 54.1 51.9

47.9

43.2

38.1

33.1

67.0

53.8

53.2

56.4

53.4 54.8 54.1 51.6 54.3 52.7 64.3 56.9 56.9 55.7 57.0 53.4 51.9

48.1

43.9

40.0

35.8

68.0

53.9
53.3

55.0
53.8

55.7
52.9

52.3 54.0 51.3 50.2 50.9 50.0 57.5 53.1 55.3 52.1 51.3 47.3 45.3
50.8 52.5 50.7 50.5 52.8 50.5 51.7 53.5 51.4 49.9 51.2 46.7 44.0

41.4
40.5

36.1
35.6

32.0
31.5

27.1
26.7

63.3
61.5

55.4

54.1

55.2

52.7 52.8 52.5 50.7 52.7 52.3 56.0 54.2 52.8 51.5 53.0 47.9 45.7

42.8

37.6

34.0

29.3

63.4

57.4

57.9

60.8

53.7 53.1 54.4 56.8 53.8 52.5 54.8 54.6 52.9 53.5 54.3 49.6 48.1

44.9

39.7

36.7

31.2

64.2

60.1

57.6

58.5

53.2 53.1 54.3 55.1 52.9 52.1 53.1 52.7 51.0 51.3 52.2 47.4 45.8

42.4

37.3

34.4

29.8

62.7

61.8

57.3

53.0

52.6 53.1 54.1 52.2 51.8 51.6 50.3 49.4 47.7 46.5 47.8 42.9 40.4

35.7

31.6

29.3

27.8

60.1

67.9

64.1

58.1

56.0 58.4 54.9 56.0 54.0 53.9 51.0 49.4 48.6 47.3 46.0 43.1 40.9

40.3

43.4

46.3

48.0

62.9

67.1

63.1

62.6

56.6 71.3 57.9 56.8 55.3 54.1 52.4 50.8 49.9 48.5 47.1 44.7 41.9

42.1

45.2

48.1

49.8

67.0

63.4

61.4

63.2

59.0 62.8 61.1 58.7 58.0 57.7 56.7 55.1 53.6 52.4 51.7 48.0 45.4

41.7

41.4

42.3

42.9

66.4

46.1
47.1

44.7
46.2

44.8
44.8

44.3 42.3 42.8 42.9 42.4 41.4 40.9 42.3 39.1 35.7 31.8 26.9 22.7
45.1 43.3 43.6 43.7 44.4 42.1 41.9 42.9 40.1 38.5 35.5 31.2 27.2

20.8
22.4

20.8
21.2

20.6
21.0

21.1
21.5

50.0
51.2

47.1
47.1

46.6
46.6

47.2
47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4
45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8
26.8

22.3
22.3

20.8
20.8

20.8
20.8

53.7
53.7

47.1

46.6

47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8

22.3

20.8

20.8

53.7

47.1

46.6

47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8

22.3

20.8

20.8

53.7

46.9

47.4

48.3

54.2 47.0 47.4 47.3 46.7 46.6 45.5 47.2 45.6 45.3 41.9 39.0 38.2

36.2

31.6

30.6

30.9

56.0

46.9
44.3

47.4
46.5

48.3
50.1

54.2 47.0 47.4 47.3 46.7 46.6 45.5 47.2 45.6 45.3 41.9 39.0 38.2
49.3 48.5 46.4 49.4 48.7 46.8 46.6 47.3 43.5 41.8 38.8 35.2 33.5

36.2
29.8

31.6
22.4

30.6
20.9

30.9
21.1

56.0
55.5

46.7
45.5

49.1
46.4

48.7
49.4

48.4 48.4 47.0 48.6 49.3 46.7 46.3 46.7 43.0 41.5 38.5 34.8 31.7
46.9 48.0 45.0 46.5 46.2 44.5 44.5 45.3 42.1 40.1 36.9 32.9 29.1

26.7
24.1

22.8
21.3

21.1
20.6

21.1
20.9

55.2
53.5

45.3

46.7

47.4

47.3 46.5 44.8 46.0 46.4 44.2 44.4 45.7 42.2 40.0 36.8 32.7 28.5

23.0

20.9

20.5

20.9

53.3

45.3

46.7

47.4

47.3 46.5 44.8 46.0 46.4 44.2 44.4 45.7 42.2 40.0 36.8 32.7 28.5

23.0

20.9

20.5

20.9

53.3

43.9

45.2

48.4

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7

22.1

20.7

20.6

21.2

51.5

43.9

45.2

48.4

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7

22.1

20.7

20.6

21.2

51.5

43.9
46.1

45.2
44.7

48.4
44.8

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7
44.3 42.3 42.8 42.9 42.4 41.4 40.9 42.3 39.1 35.7 31.8 26.9 22.7

22.1
20.8

20.7
20.8

20.6
20.6

21.2
21.1

51.5
50.0

25/09/2011
final report version 3

51/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Full Bypass (with 100 GT load) m inus Background


a
60.0 72.8 64.7 67.7 69.9 65.6 68.7 65.3 63.0 59.0 56.6 54.2
52.4 50.8 51.6
b
62.8 69.6 68.2 65.5 69.0 67.1 67.9 63.2 60.8 60.4 57.3 54.7
53.6 50.6 52.2
c
63.3 69.7 68.3 65.2 68.0 65.8 67.8 60.9 58.3 57.5 55.7 51.6
52.1 48.6 50.0
d
62.3 60.5 69.7 66.8 66.3 65.3 73.4 61.0 57.2 57.7 55.6 50.9
52.3 48.3 49.6
e
58.1 64.8 65.4 65.0 63.3 63.7 70.5 61.9 56.4 53.6 53.3 49.8
53.4 46.4 51.3
f
60.9 62.3 63.4 60.6 60.4 62.1 69.0 60.0 54.7 53.9 47.3 48.2
48.7 45.1 47.9
g
67.3 60.7 63.1 62.5 59.7 60.3 70.7 60.1 58.7 54.0 52.9 50.3
52.1 #### 54.6
h
70.4 63.5 66.0 62.1 64.1 65.4 79.0 68.6 56.4 55.5 52.8 51.9
55.7 #### 54.0
i
74.0 64.7 65.7 60.2 56.9 62.4 72.9 67.4 56.8 58.1 53.4 54.3
54.3 49.3 52.6
j
67.7 65.7 64.0 62.0 64.7 #### 73.4 63.8 55.5 58.6 52.2 52.0
50.8 47.1 50.4
k
74.2 67.4 65.7 64.9 64.9 69.4 82.4 68.7 58.8 62.2 54.9 53.3
53.9 51.4 51.1
l
72.3 65.9 65.2 61.3 62.2 65.7 75.8 65.6 57.5 61.1 57.1 57.6
60.6 52.6 52.0
m
69.5 68.0 63.7 63.2 69.2 67.6 73.7 66.1 62.1 60.9 60.0 57.2
58.1 51.9 52.0
n
65.4 69.5 61.3 64.7 71.8 69.0 69.8 66.6 64.2 60.7 61.7 57.0
51.2 51.5 52.3
o
66.7 74.6 68.3 70.4 77.7 74.1 74.9 71.6 69.1 68.0 67.9 64.0
57.6 55.5 58.2
p
67.6 80.0 68.5 70.8 78.9 76.1 75.5 73.1 71.0 70.4 67.1 63.0
62.4 56.2 71.3
q
68.2 73.7 69.3 72.3 74.8 73.3 73.0 70.9 69.0 70.2 63.3 61.3
63.1 58.9 62.8
For those levels where the background level is higher than signal level (level with Bypass)
a
60.0 72.8 64.7 67.7 69.9 65.6 68.7 65.3 63.0 59.0 56.6 54.2 52.4 50.8 51.6
b
62.8 69.6 68.2 65.5 69.0 67.1 67.9 63.2 60.8 60.4 57.3 54.7 53.6 50.6 52.2
c
63.3 69.7 68.3 65.2 68.0 65.8 67.8 60.9 58.3 57.5 55.7 51.6 52.1 48.6 50.0
d
62.3 60.5 69.7 66.8 66.3 65.3 73.4 61.0 57.2 57.7 55.6 50.9 52.3 48.3 49.6
e
58.1 64.8 65.4 65.0 63.3 63.7 70.5 61.9 56.4 53.6 53.3 49.8 53.4 46.4 51.3
f
60.9 62.3 63.4 60.6 60.4 62.1 69.0 60.0 54.7 53.9 47.3 48.2 48.7 45.1 47.9
g
67.3 60.7 63.1 62.5 59.7 60.3 70.7 60.1 58.7 54.0 52.9 50.3 52.1 44.0 54.6
h
70.4 63.5 66.0 62.1 64.1 65.4 79.0 68.6 56.4 55.5 52.8 51.9 55.7 46.4 54.0
i
74.0 64.7 65.7 60.2 56.9 62.4 72.9 67.4 56.8 58.1 53.4 54.3 54.3 49.3 52.6
j
67.7 65.7 64.0 62.0 64.7 56.6 73.4 63.8 55.5 58.6 52.2 52.0 50.8 47.1 50.4
k
74.2 67.4 65.7 64.9 64.9 69.4 82.4 68.7 58.8 62.2 54.9 53.3 53.9 51.4 51.1
l
72.3 65.9 65.2 61.3 62.2 65.7 75.8 65.6 57.5 61.1 57.1 57.6 60.6 52.6 52.0
m
69.5 68.0 63.7 63.2 69.2 67.6 73.7 66.1 62.1 60.9 60.0 57.2 58.1 51.9 52.0
n
65.4 69.5 61.3 64.7 71.8 69.0 69.8 66.6 64.2 60.7 61.7 57.0 51.2 51.5 52.3
o
66.7 74.6 68.3 70.4 77.7 74.1 74.9 71.6 69.1 68.0 67.9 64.0 57.6 55.5 58.2
p
67.6 80.0 68.5 70.8 78.9 76.1 75.5 73.1 71.0 70.4 67.1 63.0 62.4 56.2 71.3
q
68.2 73.7 69.3 72.3 74.8 73.3 73.0 70.9 69.0 70.2 63.3 61.3 63.1 58.9 62.8

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

51.0

50.6

50.9

50.7 54.0 51.2 52.8 52.9 53.9 49.5 47.3 41.9 36.1 31.1 27.3

51.6

52.8

51.8

52.0 57.4 53.5 54.8 55.6 56.7 54.8 51.2 45.1 39.3 32.5 26.9

49.1

48.5

52.4

51.0 59.2 54.5 55.7 56.0 56.1 52.2 50.8 46.0 42.2 37.3 31.3

49.5

49.9

51.6

51.5 59.6 55.1 56.6 56.9 58.7 54.4 53.9 49.0 43.9 38.6 33.3

47.4

46.2

51.1

48.9 54.1 51.8 52.1 50.9 52.3 47.1 44.8 40.9 36.2 31.3 26.7

46.2

45.8

49.6

49.2 56.0 53.8 56.3 55.3 54.2 50.5 48.5 45.7 42.1 34.4 27.6

51.2

47.9

53.1

53.0 59.4 56.7 57.5 57.0 58.2 54.0 51.7 47.6 42.9 37.2 29.1

53.1

49.6

53.5

51.5 64.2 56.4 56.6 55.3 56.9 53.2 51.7 47.8 43.6 39.5 34.1

49.6

42.5

46.9

47.2 57.1 51.8 55.0 51.7 51.0 47.0 45.0 41.1 35.9 31.6 25.8

48.3

46.0

50.2

48.2 50.2 52.5 50.7 49.2 51.0 46.4 43.7 40.3 35.4 31.1 25.3

51.6
53.9

48.6
56.4

51.6
52.9

51.5 55.7 53.6 52.4 51.2 52.9 47.8 45.6 42.7 37.5 33.8 28.6
51.8 54.4 54.0 52.5 53.3 54.2 49.5 48.1 44.9 39.6 36.6 30.8

53.7

54.5

51.8

51.3 52.5 51.8 50.4 50.9 52.0 47.3 45.7 42.3 37.2 34.2 29.2

53.7

51.3

50.4

51.1 49.7 48.5 47.0 45.8 47.6 42.6 40.2 35.5 31.2 28.7 26.7

54.6

55.7

53.2

53.6 50.5 48.5 48.1 46.8 45.7 42.8 40.7 40.2 43.4 46.3 48.0

57.7
61.0

56.5
58.6

54.7
57.9

53.8 52.0 50.1 49.5 48.1 46.8 44.5 41.8 42.1 45.2 48.1 49.8
57.6 56.6 54.9 53.4 52.3 51.7 48.0 45.4 41.7 41.4 42.3 42.9

a level of the signal level minus 7 dB


51.0 50.6 50.9 50.7 54.0 51.2 52.8
51.6 52.8 51.8 52.0 57.4 53.5 54.8
49.1 48.5 52.4 51.0 59.2 54.5 55.7
49.5 49.9 51.6 51.5 59.6 55.1 56.6
47.4 46.2 51.1 48.9 54.1 51.8 52.1
46.2 45.8 49.6 49.2 56.0 53.8 56.3
51.2 47.9 53.1 53.0 59.4 56.7 57.5
53.1 49.6 53.5 51.5 64.2 56.4 56.6
49.6 42.5 46.9 47.2 57.1 51.8 55.0
48.3 46.0 50.2 48.2 50.2 52.5 50.7
51.6 48.6 51.6 51.5 55.7 53.6 52.4
53.9 56.4 52.9 51.8 54.4 54.0 52.5
53.7 54.5 51.8 51.3 52.5 51.8 50.4
53.7 51.3 50.4 51.1 49.7 48.5 47.0
54.6 55.7 53.2 53.6 50.5 48.5 48.1
57.7 56.5 54.7 53.8 52.0 50.1 49.5
61.0 58.6 57.9 57.6 56.6 54.9 53.4

52/61

is assumed
52.9 53.9 49.5
55.6 56.7 54.8
56.0 56.1 52.2
56.9 58.7 54.4
50.9 52.3 47.1
55.3 54.2 50.5
57.0 58.2 54.0
55.3 56.9 53.2
51.7 51.0 47.0
49.2 51.0 46.4
51.2 52.9 47.8
53.3 54.2 49.5
50.9 52.0 47.3
45.8 47.6 42.6
46.8 45.7 42.8
48.1 46.8 44.5
52.3 51.7 48.0

47.3
51.2
50.8
53.9
44.8
48.5
51.7
51.7
45.0
43.7
45.6
48.1
45.7
40.2
40.7
41.8
45.4

41.9
45.1
46.0
49.0
40.9
45.7
47.6
47.8
41.1
40.3
42.7
44.9
42.3
35.5
40.2
42.1
41.7

36.1
39.3
42.2
43.9
36.2
42.1
42.9
43.6
35.9
35.4
37.5
39.6
37.2
31.2
43.4
45.2
41.4

31.1
32.5
37.3
38.6
31.3
34.4
37.2
39.5
31.6
31.1
33.8
36.6
34.2
28.7
46.3
48.1
42.3

27.3
26.9
31.3
33.3
26.7
27.6
29.1
34.1
25.8
25.3
28.6
30.8
29.2
26.7
48.0
49.8
42.9

Noise acceptance test Far Field T-Power Tessenderlo

Copy values
a
60.0
b
62.8
c
63.3
d
62.3
e
58.1
f
60.9
g
67.3
h
70.4
i
74.0
j
67.7
k
74.2
l
72.3
m
69.5
n
65.4
o
66.7
p
67.6
q
68.2

72.8
69.6
69.7
60.5
64.8
62.3
60.7
63.5
64.7
65.7
67.4
65.9
68.0
69.5
74.6
80.0
73.7

64. 7
68. 2
68. 3
69. 7
65. 4
63. 4
63. 1
66. 0
65. 7
64. 0
65. 7
65. 2
63. 7
61. 3
68. 3
68. 5
69. 3

67. 7
65. 5
65. 2
66. 8
65. 0
60. 6
62. 5
62. 1
60. 2
62. 0
64. 9
61. 3
63. 2
64. 7
70. 4
70. 8
72. 3

69.9
69.0
68.0
66.3
63.3
60.4
59.7
64.1
56.9
64.7
64.9
62.2
69.2
71.8
77.7
78.9
74.8

65.6
67.1
65.8
65.3
63.7
62.1
60.3
65.4
62.4
56.6
69.4
65.7
67.6
69.0
74.1
76.1
73.3

Siemens NV Energy

68.7
67.9
67.8
73.4
70.5
69.0
70.7
79.0
72.9
73.4
82.4
75.8
73.7
69.8
74.9
75.5
73.0

65.3
63.2
60.9
61.0
61.9
60.0
60.1
68.6
67.4
63.8
68.7
65.6
66.1
66.6
71.6
73.1
70.9

63.0
60.8
58.3
57.2
56.4
54.7
58.7
56.4
56.8
55.5
58.8
57.5
62.1
64.2
69.1
71.0
69.0

59.0
60.4
57.5
57.7
53.6
53.9
54.0
55.5
58.1
58.6
62.2
61.1
60.9
60.7
68.0
70.4
70.2

56.6
57.3
55.7
55.6
53.3
47.3
52.9
52.8
53.4
52.2
54.9
57.1
60.0
61.7
67.9
67.1
63.3

54.2
54.7
51.6
50.9
49.8
48.2
50.3
51.9
54.3
52.0
53.3
57.6
57.2
57.0
64.0
63.0
61.3

Step 1: L p = m ean level on m easu re ment line


68.8 71.3 66. 5 66. 6 71.4 69.2 74.9 67.4 63.9 63.5 60.6 57.4

5 2.4
5 3.6
5 2.1
5 2.3
5 3.4
4 8.7
5 2.1
5 5.7
5 4.3
5 0.8
5 3.9
6 0.6
5 8.1
5 1.2
5 7.6
6 2.4
6 3.1

50.8
50.6
48.6
48.3
46.4
45.1
44.0
46.4
49.3
47.1
51.4
52.6
51.9
51.5
55.5
56.2
58.9

51.6
52.2
50.0
49.6
51.3
47.9
54.6
54.0
52.6
50.4
51.1
52.0
52.0
52.3
58.2
71.3
62.8

51.0
51.6
49.1
49.5
47.4
46.2
51.2
53.1
49.6
48.3
51.6
53.9
53.7
53.7
54.6
57.7
61.0

50 .6
52 .8
48 .5
49 .9
46 .2
45 .8
47 .9
49 .6
42 .5
46 .0
48 .6
56 .4
54 .5
51 .3
55 .7
56 .5
58 .6

50 .9
51 .8
52 .4
51 .6
51 .1
49 .6
53 .1
53 .5
46 .9
50 .2
51 .6
52 .9
51 .8
50 .4
53 .2
54 .7
57 .9

50 .7
52 .0
51 .0
51 .5
48 .9
49 .2
53 .0
51 .5
47 .2
48 .2
51 .5
51 .8
51 .3
51 .1
53 .6
53 .8
57 .6

54.0
57.4
59.2
59.6
54.1
56.0
59.4
64.2
57.1
50.2
55.7
54.4
52.5
49.7
50.5
52.0
56.6

51.2
53.5
54.5
55.1
51.8
53.8
56.7
56.4
51.8
52.5
53.6
54.0
51.8
48.5
48.5
50.1
54.9

52.8
54.8
55.7
56.6
52.1
56.3
57.5
56.6
55.0
50.7
52.4
52.5
50.4
47.0
48.1
49.5
53.4

52.9
55.6
56.0
56.9
50.9
55.3
57.0
55.3
51.7
49.2
51.2
53.3
50.9
45.8
46.8
48.1
52.3

53.9
56.7
56.1
58.7
52.3
54.2
58.2
56.9
51.0
51.0
52.9
54.2
52.0
47.6
45.7
46.8
51.7

49.5
54.8
52.2
54.4
47.1
50.5
54.0
53.2
47.0
46.4
47.8
49.5
47.3
42.6
42.8
44.5
48.0

41.9
45.1
46.0
49.0
40.9
45.7
47.6
47.8
41.1
40.3
42.7
44.9
42.3
35.5
40.2
42.1
41.7

36.1
39.3
42.2
43.9
36.2
42.1
42.9
43.6
35.9
35.4
37.5
39.6
37.2
31.2
43.4
45.2
41.4

31.1
32.5
37.3
38.6
31.3
34.4
37.2
39.5
31.6
31.1
33.8
36.6
34.2
28.7
46.3
48.1
42.3

27. 3
26. 9
31. 3
33. 3
26. 7
27. 6
29. 1
34. 1
25. 8
25. 3
28. 6
30. 8
29. 2
26. 7
48. 0
49. 8
42. 9

5 7.0 52.2 60.3 53.8 52 .8 52 .6 52 .1 57.2 53.5 54.0 53.5 54.3 50.4 48.5 44.4 41.0 40.0 40. 5

Step 2: differance between highest level in position h (67.8 dB(A)) and lowest level in positio n n (5 9.6 dB(A)) is < 10 dB(A)
If t he 1 /3 o ctave leve l in t he m easurem ent position x is 5 dB high er tha n the m ean 1/3 octave level Lp, re place that level by the level Lp + 5 dB
a
60.0 72.8 64. 7 67. 7 69.9 65.6 68.7 65.3 63.0 59.0 56.6 54.2 5 2.4 50.8 51.6 51.0 50 .6 50 .9 50 .7 54.0 51.2 52.8 52.9 53.9 49.5
b
62.8 69.6 68. 2 65. 5 69.0 67.1 67.9 63.2 60.8 60.4 57.3 54.7 5 3.6 50.6 52.2 51.6 52 .8 51 .8 52 .0 57.4 53.5 54.8 55.6 56.7 54.8
c
63.3 69.7 68. 3 65. 2 68.0 65.8 67.8 60.9 58.3 57.5 55.7 51.6 5 2.1 48.6 50.0 49.1 48 .5 52 .4 51 .0 59.2 54.5 55.7 56.0 56.1 52.2
d
62.3 60.5 69. 7 66. 8 66.3 65.3 73.4 61.0 57.2 57.7 55.6 50.9 5 2.3 48.3 49.6 49.5 49 .9 51 .6 51 .5 59.6 55.1 56.6 56.9 58.7 54.4
e
58.1 64.8 65. 4 65. 0 63.3 63.7 70.5 61.9 56.4 53.6 53.3 49.8 5 3.4 46.4 51.3 47.4 46 .2 51 .1 48 .9 54.1 51.8 52.1 50.9 52.3 47.1
f
60.9 62.3 63. 4 60. 6 60.4 62.1 69.0 60.0 54.7 53.9 47.3 48.2 4 8.7 45.1 47.9 46.2 45 .8 49 .6 49 .2 56.0 53.8 56.3 55.3 54.2 50.5
g
67.3 60.7 63. 1 62. 5 59.7 60.3 70.7 60.1 58.7 54.0 52.9 50.3 5 2.1 44.0 54.6 51.2 47 .9 53 .1 53 .0 59.4 56.7 57.5 57.0 58.2 54.0
h
70.4 63.5 66. 0 62. 1 64.1 65.4 79.0 68.6 56.4 55.5 52.8 51.9 5 5.7 46.4 54.0 53.1 49 .6 53 .5 51 .5 62.2 56.4 56.6 55.3 56.9 53.2
i
73.8 64.7 65. 7 60. 2 56.9 62.4 72.9 67.4 56.8 58.1 53.4 54.3 5 4.3 49.3 52.6 49.6 42 .5 46 .9 47 .2 57.1 51.8 55.0 51.7 51.0 47.0
j
67.7 65.7 64. 0 62. 0 64.7 56.6 73.4 63.8 55.5 58.6 52.2 52.0 5 0.8 47.1 50.4 48.3 46 .0 50 .2 48 .2 50.2 52.5 50.7 49.2 51.0 46.4
k
73.8 67.4 65. 7 64. 9 64.9 69.4 79.9 68.7 58.8 62.2 54.9 53.3 5 3.9 51.4 51.1 51.6 48 .6 51 .6 51 .5 55.7 53.6 52.4 51.2 52.9 47.8
l
72.3 65.9 65. 2 61. 3 62.2 65.7 75.8 65.6 57.5 61.1 57.1 57.6 6 0.6 52.6 52.0 53.9 56 .4 52 .9 51 .8 54.4 54.0 52.5 53.3 54.2 49.5
m
69.5 68.0 63. 7 63. 2 69.2 67.6 73.7 66.1 62.1 60.9 60.0 57.2 5 8.1 51.9 52.0 53.7 54 .5 51 .8 51 .3 52.5 51.8 50.4 50.9 52.0 47.3
n
65.4 69.5 61. 3 64. 7 71.8 69.0 69.8 66.6 64.2 60.7 61.7 57.0 5 1.2 51.5 52.3 53.7 51 .3 50 .4 51 .1 49.7 48.5 47.0 45.8 47.6 42.6
o
66.7 74.6 68. 3 70. 4 76.4 74.1 74.9 71.6 68.9 68.0 65.6 62.4 5 7.6 55.5 58.2 54.6 55 .7 53 .2 53 .6 50.5 48.5 48.1 46.8 45.7 42.8
p
67.6 76.3 68. 5 70. 8 76.4 74.2 75.5 72.4 68.9 68.5 65.6 62.4 6 2.0 56.2 65.3 57.7 56 .5 54 .7 53 .8 52.0 50.1 49.5 48.1 46.8 44.5
q
68.2 73.7 69. 3 71. 6 74.8 73.3 73.0 70.9 68.9 68.5 63.3 61.3 6 2.0 57.2 62.8 58.8 57 .8 57 .6 57 .1 56.6 54.9 53.4 52.3 51.7 48.0

SGS Belgium NV
Reportnumber : 11.0029-1-v6

47.3
51.2
50.8
53.9
44.8
48.5
51.7
51.7
45.0
43.7
45.6
48.1
45.7
40.2
40.7
41.8
45.4

25/09/2011
final report version 3

53/61

47.3
51.2
50.8
53.5
44.8
48.5
51.7
51.7
45.0
43.7
45.6
48.1
45.7
40.2
40.7
41.8
45.4

41.9
45.1
46.0
49.0
40.9
45.7
47.6
47.8
41.1
40.3
42.7
44.9
42.3
35.5
40.2
42.1
41.7

36.1
39.3
42.2
43.9
36.2
42.1
42.9
43.6
35.9
35.4
37.5
39.6
37.2
31.2
43.4
45.2
41.4

31.1
32.5
37.3
38.6
31.3
34.4
37.2
39.5
31.6
31.1
33.8
36.6
34.2
28.7
45.0
45.0
42.3

27. 3
26. 9
31. 3
33. 3
26. 7
27. 6
29. 1
34. 1
25. 8
25. 3
28. 6
30. 8
29. 2
26. 7
45. 5
45. 5
42. 9

LpA
62.6
65.3
65.4
66.7
61.5
64.0
66.8
67.8
62.6
60.4
63.1
63.9
62.2
59.6
62.6
67.2
66.4

64.6

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Step 3: Lp = mean of corrigated levels (step 2) on measurement line


68.7 70.1 66.5 66.4 70.3 68.7 74.2 67.3 63.2 62.7 59.6 56.9

56.6 51.8 56.8 53.2 52.6 52.6 52.0 56.7 53.5 54.0 53.5 54.3 50.4 48.5 44.4 41.0 38.8 37.8

Step 4: calculation surface factor Ls = 10xLOG ((2xSm + h.l)/So)


with Sm = measuring surface = 170x182 =
h = meausuring hight =
l = lenght off measuring line = 2x170+2x182 =
So = reference surface =

m
7 m
704 m
1 m

48.2

30940

Step 5: calculation near field factor L F = LOG ((d/(4x?Sp))


with d = mean measurement distance between Sm and Sp
51.8 m
Sp = source surface = ground surface of rectangle around UMC+UHA+UMX+ULA+UBF = 45 x 143m
6435 m

-0.792

Step 6: calculation microphone factor LM = 0


LM = 0 because of the use of a omnidirectional microphone
Step 7: calculation air absorption factor L = 0.5 x a lu x ?Sm
with Sm = measuring surface = 200x191 =
38200 m
alu = air absorption according to ISO 9613-1 51993) at 70% relative humidity and 10C according to guide line Emola Begis LNE (Flanders environmental legislation)
12 16 20 25 31 40 50 63 80 100 125 160 200 250 315 400 500 630 800 1 k 1.25 k 1.6 k 2 k 2.5 k 3.15 k 4 k 5 k 6.3 k 8 k 10 k
dB/km

0.079

0.079

0.079

0.079

0.079

0.079

0.079

0.122

0.186

0.280

0.411

0.584

0.797

1.040

1.310

1.600

1.930

2.330

2.870

3.660

4.860

6.730

9.66

14. 30

21.50

32.80

50.20

76.90

117.00

175.00

dB/m

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.001

0.001

0.001

0.001

0.002

0.002

0.002

0.003

0.004

0.005

0.007

0.010

0.014

0.022

0.033

0. 050

0.077

0.117

0.175

80
dB

100 125 160


dB dB dB

200
dB

250 315 400 500 630 800


dB dB dB dB dB dB

Step 8: calculation LwA = Lp + Ls + LF + LM + L


LwA

12
dB

16
dB

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

116.1 117.5 114.0 113.9 117.8 116.1 121.7 114.7 110.7 110.1 107.1 104.4

SGS Belgium NV
Reportnumber : 11.0029-1-v6

1 k 1.25 k1.6 k 2 k 2.5 k3.15 k 4 k


dB dB dB dB dB dB dB

5 k 6.3 k 8 k 10 k
dB dB dB dB

LwA
dB(A)

104.1 99.2 104.2 100.6 100.1 100.0 99.5 104.2 100.9 101.4 100.9 101.8 97.9 95.9 91.9 88.5 86.3 85.5

111.7

25/09/2011
final report version 3

54/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Simulated Start Up (Steam turbine bypass and 40% GT load)


f(Hz)
12
16
20
25
31
40
50
63
80 100
Pos.
dB dB dB dB dB dB dB dB dB dB
Start Up (with 40 GT loud) - night from 13 till 14 June 2011
a
62.3 80.1 62.8 67.5 67.8 65.3 66.9 65.2 62.0 62.6
b
63.3 72.4 62.7 64.7 71.4 66.8 68.4 62.9 61.7 60.3
c
62.9 73.1 63.2 64.6 60.9 65.3 63.4 60.1 58.1 57.9
d
65.1 66.5 63.4 65.0 67.2 64.2 62.9 59.1 56.3 55.5
e
61.5 68.1 62.0 63.7 61.6 62.8 63.3 58.0 53.9 54.2
f
62.1 64.0 60.7 61.7 62.1 61.0 61.2 57.0 53.5 52.2
g
66.5 63.3 62.6 61.4 58.7 57.9 60.1 54.8 55.2 56.3
h
68.8 66.4 63.0 61.7 64.1 62.4 63.2 58.8 59.6 57.9
i
74.6 69.3 64.1 61.3 61.1 62.3 61.2 56.8 58.3 58.0
j
69.6 66.9 65.4 62.1 62.1 62.5 63.4 58.1 54.8 57.6
k
73.5 69.5 64.7 63.8 63.7 64.0 64.0 60.9 57.0 60.7
l
72.1 67.0 64.5 63.3 64.8 64.7 66.6 61.0 59.2 59.3
m
70.0 68.9 63.3 64.5 66.0 67.4 68.3 65.4 62.1 59.1
n
65.9 70.2 61.6 65.5 66.9 69.0 69.5 67.6 63.8 58.9
o
67.8 73.1 65.1 70.0 77.3 74.6 74.4 71.7 68.7 64.9
p
68.6 77.9 67.0 71.3 74.5 77.8 75.4 74.1 70.9 65.5
q
67.4 75.2 64.3 71.1 74.4 73.0 72.5 70.7 67.9 65.5
Corresponding background levels 12 to 13 April 2011.
a
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5 47.3
b
60.5 59.9 57.1 56.4 53.8 50.4 49.3 45.6 45.7 47.6
c
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
d
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
e
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
f
60.2 58.4 52.1 54.3 50.0 48.3 47.7 42.4 45.5 48.2
g
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9 54.4
h
55.7 57.1 54.5 53.0 52.2 54.1 49.9 51.7 48.9 54.4
i
64.0 57.4 55.9 56.1 59.2 56.1 49.5 54.4 46.4 46.0
j
68.8 56.9 53.0 55.4 55.3 64.5 53.8 52.6 45.6 48.0
k
68.3 59.6 57.2 56.1 56.9 55.5 49.6 53.2 45.8 46.5
l
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2 45.4
m
67.0 60.5 58.1 57.7 56.3 54.5 48.7 51.7 44.2 45.4
n
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
o
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
p
63.8 59.7 57.8 56.5 53.7 53.6 47.4 48.1 45.2 44.6
q
60.6 54.9 51.9 57.3 46.4 45.0 45.5 44.8 46.5 47.3

SGS Belgium NV
Reportnumber : 11.0029-1-v6

125
dB

160
dB

200
dB

2 50 315 400 500 630 800


dB dB dB dB dB dB

56.9

53.8

52.0

55.2
54.7

52.8
52.2

53.1
52.3

53.1

51.6

51.8

50.7

49.4

1 k 1.25 k 1.6 k 2 k 2.5 k 3.15 k 4 k


dB dB dB dB dB dB dB

5 k 6.3 k 8 k
dB dB dB

10 k
dB

LAeq
dB(A)

51.2 52.3 52.4 51.9 51.2 50.1 53.4 48.8 50.3 50.4 51.1 46.8 44.8

41.0

38.3

34.9

32.5

61.2

50.9 51.5 51.4 51.7 50.6 50.5 54.0 50.5 51.4 52.8 54.4 50.7 48.7
50.7 54.1 50.6 50.4 51.2 50.6 55.1 51.7 52.7 54.3 55.0 50.7 50.0

43.9
46.6

40.8
44.7

36.0
41.4

32.1
38.5

62.7
63.5

53.5

49.4 51.1 50.2 50.2 50.1 49.6 55.0 52.1 52.6 54.3 54.7 52.4 52.1

48.0

46.2

42.6

38.4

63.7

51.1

48.8 50.4 50.0 49.1 50.8 48.8 52.9 50.5 50.9 50.2 50.0 46.3 44.8

41.5

38.6

35.0

31.7

60.6

50.5

51.5

48.4 49.3 49.4 48.2 50.8 48.8 55.0 51.0 52.5 52.8 53.2 49.0 48.0

44.7

44.5

38.6

33.6

62.3

51.3
54.1

51.6
55.5

52.0
55.6

51.7 53.0 52.1 50.6 53.9 52.3 57.3 54.1 55.5 55.6 57.1 52.3 50.9
56.4 57.0 55.8 53.4 55.0 52.9 57.8 54.5 56.2 55.0 55.3 51.8 50.9

47.2
48.1

44.8
46.4

40.7
43.4

36.5
40.8

65.3
65.6

53.9

54.2

57.2

53.9 54.7 52.8 51.0 51.0 50.7 54.7 51.6 52.1 51.0 51.4 50.3 49.2

46.3

43.2

40.6

39.5

62.5

54.5

52.9

53.7

51.2 51.0 49.6 50.3 50.9 49.3 50.5 51.3 51.2 50.7 51.2 50.5 49.0

46.7

44.7

41.5

39.8

61.5

55.3

54.2

56.5

51.7 52.8 51.0 51.1 52.0 51.7 54.1 53.6 53.5 53.1 55.2 53.5 52.0

50.0

47.3

45.7

44.7

64.2

56.3
56.3

56.1
54.9

61.4
59.0

53.2 52.1 51.5 57.3 52.0 51.5 55.0 53.7 54.0 54.0 55.1 53.9 53.0
52.1 51.8 50.7 55.1 50.9 50.4 52.7 51.5 51.7 51.6 52.7 51.5 50.5

50.2
47.6

47.9
45.2

45.6
42.8

43.9
41.1

65.0
62.7

56.2

53.1

52.8

50.6 51.4 49.7 50.2 49.3 48.9 47.5 46.6 46.8 45.7 46.6 45.5 43.9

40.0

36.8

33.3

31.3

58.4

60.5

57.9

57.3

53.8 55.1 54.1 54.8 52.8 52.1 50.2 48.2 47.5 46.0 44.9 43.3 42.0

43.8

48.3

51.3

53.3

62.1

62.5

61.1

62.1

56.1 67.3 55.4 55.6 54.4 54.0 51.8 49.8 49.0 47.8 46.3 44.4 42.9

44.6

49.1

52.0

54.3

65.2

62.5

59.5

59.0

57.6 62.2 58.3 57.9 56.5 55.9 55.5 53.1 52.0 50.5 49.6 46.8 45.5

44.2

45.9

47.7

49.2

65.0

46.1

44.7

44.8

44.3 42.3 42.8 42.9 42.4 41.4 40.9 42.3 39.1 35.7 31.8 26.9 22.7

20.8

20.8

20.6

21.1

50.0

47.1

46.2

44.8

45.1 43.3 43.6 43.7 44.4 42.1 41.9 42.9 40.1 38.5 35.5 31.2 27.2

22.4

21.2

21.0

21.5

51.2

47.1

46.6

47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8

22.3

20.8

20.8

53.7

47.1
47.1

46.6
46.6

47.2
47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4
45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8
26.8

22.3
22.3

20.8
20.8

20.8
20.8

53.7
53.7

47.1

46.6

47.2

45.5 44.3 45.3 46.4 45.4 44.6 46.1 44.7 42.8 42.0 39.9 36.8 33.4

26.8

22.3

20.8

20.8

53.7

46.9

47.4

48.3

54.2 47.0 47.4 47.3 46.7 46.6 45.5 47.2 45.6 45.3 41.9 39.0 38.2

36.2

31.6

30.6

30.9

56.0

46.9

47.4

48.3

54.2 47.0 47.4 47.3 46.7 46.6 45.5 47.2 45.6 45.3 41.9 39.0 38.2

36.2

31.6

30.6

30.9

56.0

44.3

46.5

50.1

49.3 48.5 46.4 49.4 48.7 46.8 46.6 47.3 43.5 41.8 38.8 35.2 33.5

29.8

22.4

20.9

21.1

55.5

46.7

49.1

48.7

48.4 48.4 47.0 48.6 49.3 46.7 46.3 46.7 43.0 41.5 38.5 34.8 31.7

26.7

22.8

21.1

21.1

55.2

45.5

46.4

49.4

46.9 48.0 45.0 46.5 46.2 44.5 44.5 45.3 42.1 40.1 36.9 32.9 29.1

24.1

21.3

20.6

20.9

53.5

45.3

46.7

47.4

47.3 46.5 44.8 46.0 46.4 44.2 44.4 45.7 42.2 40.0 36.8 32.7 28.5

23.0

20.9

20.5

20.9

53.3

45.3

46.7

47.4

47.3 46.5 44.8 46.0 46.4 44.2 44.4 45.7 42.2 40.0 36.8 32.7 28.5

23.0

20.9

20.5

20.9

53.3

43.9

45.2

48.4

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7

22.1

20.7

20.6

21.2

51.5

43.9

45.2

48.4

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7

22.1

20.7

20.6

21.2

51.5

43.9

45.2

48.4

46.1 45.2 43.3 44.8 46.3 41.9 41.7 42.3 39.2 38.0 34.8 31.2 26.7

22.1

20.7

20.6

21.2

51.5

46.1

44.7

44.8

44.3 42.3 42.8 42.9 42.4 41.4 40.9 42.3 39.1 35.7 31.8 26.9 22.7

20.8

20.8

20.6

21.1

50.0

25/09/2011
final report version 3

55/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Simulated start up with 40% GT load minus Background


a
57.4 80.1 62.4 67.1 67.8 65.3 66.9 65.2 61.9 62.5 56.5 53.2
51.1 50.2 51.8 51.9 51.3 50.6 49.5 53.1 47.7 50.0 50.3 51.0 46.8
b
60.1 72.1 61.3 64.0 71.3 66.7 68.3 62.8 61.6 60.1 54.5 51.7
52.4 49.6 50.8 50.6 51.0 49.4 49.8 53.7 49.7 51.1 52.6 54.3 50.7
c
59.6 73.0 62.8 64.2 60.5 65.2 63.3 60.0 57.9 57.4 53.9 50.8
50.7 49.1 53.6 49.1 48.2 49.9 49.3 54.5 50.7 52.2 54.0 54.9 50.5
d
63.4 65.8 63.1 64.6 67.1 64.1 62.8 59.0 55.9 54.6 51.8 49.9
52.3 47.1 50.1 48.5 47.9 48.3 47.9 54.4 51.2 52.1 54.0 54.6 52.3
e
55.6 67.6 61.5 63.2 61.3 62.6 63.2 57.9 53.2 52.9 50.0 48.6
48.8 46.1 49.2 48.2 45.8 49.3 46.7 51.9 49.2 50.2 49.5 49.6 45.8
f
57.6 62.6 60.1 60.8 61.8 60.8 61.0 56.8 52.8 50.0 45.5 48.2
49.5 45.3 47.6 47.3 43.5 49.3 46.7 54.4 49.8 52.0 52.4 53.0 48.7
g
66.1 62.1 61.9 60.7 57.6 55.6 59.7 51.9 54.0 51.8 49.3 49.5
49.6 #### 51.7 50.3 47.9 53.0 50.9 57.0 53.1 55.0 55.2 57.0 52.1
h
68.6 65.9 62.3 61.1 63.8 61.7 63.0 57.9 59.2 55.3 53.2 54.8
54.7 52.4 56.5 55.1 52.2 54.3 51.7 57.5 53.6 55.8 54.5 55.1 51.6
i
74.2 69.0 63.4 59.7 56.6 61.1 60.9 53.1 58.0 57.7 53.4 53.4
56.3 52.1 53.5 51.7 45.9 47.1 48.4 54.0 49.6 51.5 50.4 51.2 50.2
j
61.9 66.4 65.1 61.1 61.1 #### 62.9 56.7 54.2 57.1 53.7 50.6
52.0 48.0 47.5 46.1 45.4 45.8 45.8 48.4 49.5 50.5 50.1 51.0 50.4
k
71.9 69.0 63.8 63.0 62.7 63.3 63.8 60.1 56.7 60.5 54.8 53.4
55.6 50.0 51.1 49.7 49.3 50.7 50.8 53.6 52.9 53.2 52.9 55.1 53.5
l
70.5 65.9 63.4 61.9 64.1 64.3 66.5 60.5 59.1 59.1 55.9 55.6
61.2 51.9 50.7 50.5 57.0 50.6 50.6 54.6 53.0 53.7 53.8 55.0 53.9
m
67.0 68.2 61.7 63.5 65.5 67.1 68.2 65.3 62.0 58.9 55.9 54.1
58.6 50.3 50.2 49.4 54.5 48.9 49.2 52.0 50.1 51.2 51.3 52.5 51.4
n
61.7 69.8 59.3 64.9 66.7 68.9 69.5 67.6 63.7 58.7 55.9 52.3
50.8 48.7 50.2 48.6 48.7 46.3 47.9 46.2 44.6 46.0 44.9 46.3 45.3
o
65.6 72.9 64.2 69.8 77.3 74.6 74.4 71.7 68.7 64.9 60.4 57.7
56.7 53.0 54.6 53.7 54.3 51.7 51.7 49.5 46.9 46.8 45.3 44.5 43.0
p
66.9 77.8 66.4 71.2 74.5 77.8 75.4 74.1 70.9 65.5 62.4 61.0
61.9 55.6 67.3 55.1 55.2 53.7 53.7 51.4 48.9 48.5 47.3 46.0 44.2
q
66.4 75.2 64.0 70.9 74.4 73.0 72.5 70.7 67.9 65.4 62.4 59.4
58.8 57.4 62.2 58.2 57.8 56.3 55.7 55.3 52.7 51.8 50.4 49.5 46.8
For those levels where the background level is higher than signal level (level with StartUp) a level of the signal level minus 7 dB is assumed
a
57.4 80.1 62.4 67.1 67.8 65.3 66.9 65.2 61.9 62.5 56.5 53.2 51.1 50.2 51.8 51.9 51.3 50.6 49.5 53.1 47.7 50.0 50.3 51.0 46.8
b
60.1 72.1 61.3 64.0 71.3 66.7 68.3 62.8 61.6 60.1 54.5 51.7 52.4 49.6 50.8 50.6 51.0 49.4 49.8 53.7 49.7 51.1 52.6 54.3 50.7
c
59.6 73.0 62.8 64.2 60.5 65.2 63.3 60.0 57.9 57.4 53.9 50.8 50.7 49.1 53.6 49.1 48.2 49.9 49.3 54.5 50.7 52.2 54.0 54.9 50.5
d
63.4 65.8 63.1 64.6 67.1 64.1 62.8 59.0 55.9 54.6 51.8 49.9 52.3 47.1 50.1 48.5 47.9 48.3 47.9 54.4 51.2 52.1 54.0 54.6 52.3
e
55.6 67.6 61.5 63.2 61.3 62.6 63.2 57.9 53.2 52.9 50.0 48.6 48.8 46.1 49.2 48.2 45.8 49.3 46.7 51.9 49.2 50.2 49.5 49.6 45.8
f
57.6 62.6 60.1 60.8 61.8 60.8 61.0 56.8 52.8 50.0 45.5 48.2 49.5 45.3 47.6 47.3 43.5 49.3 46.7 54.4 49.8 52.0 52.4 53.0 48.7
g
66.1 62.1 61.9 60.7 57.6 55.6 59.7 51.9 54.0 51.8 49.3 49.5 49.6 44.7 51.7 50.3 47.9 53.0 50.9 57.0 53.1 55.0 55.2 57.0 52.1
h
68.6 65.9 62.3 61.1 63.8 61.7 63.0 57.9 59.2 55.3 53.2 54.8 54.7 52.4 56.5 55.1 52.2 54.3 51.7 57.5 53.6 55.8 54.5 55.1 51.6
i
74.2 69.0 63.4 59.7 56.6 61.1 60.9 53.1 58.0 57.7 53.4 53.4 56.3 52.1 53.5 51.7 45.9 47.1 48.4 54.0 49.6 51.5 50.4 51.2 50.2
j
61.9 66.4 65.1 61.1 61.1 55.5 62.9 56.7 54.2 57.1 53.7 50.6 52.0 48.0 47.5 46.1 45.4 45.8 45.8 48.4 49.5 50.5 50.1 51.0 50.4
k
71.9 69.0 63.8 63.0 62.7 63.3 63.8 60.1 56.7 60.5 54.8 53.4 55.6 50.0 51.1 49.7 49.3 50.7 50.8 53.6 52.9 53.2 52.9 55.1 53.5
l
70.5 65.9 63.4 61.9 64.1 64.3 66.5 60.5 59.1 59.1 55.9 55.6 61.2 51.9 50.7 50.5 57.0 50.6 50.6 54.6 53.0 53.7 53.8 55.0 53.9
m
67.0 68.2 61.7 63.5 65.5 67.1 68.2 65.3 62.0 58.9 55.9 54.1 58.6 50.3 50.2 49.4 54.5 48.9 49.2 52.0 50.1 51.2 51.3 52.5 51.4
n
61.7 69.8 59.3 64.9 66.7 68.9 69.5 67.6 63.7 58.7 55.9 52.3 50.8 48.7 50.2 48.6 48.7 46.3 47.9 46.2 44.6 46.0 44.9 46.3 45.3
o
65.6 72.9 64.2 69.8 77.3 74.6 74.4 71.7 68.7 64.9 60.4 57.7 56.7 53.0 54.6 53.7 54.3 51.7 51.7 49.5 46.9 46.8 45.3 44.5 43.0
p
66.9 77.8 66.4 71.2 74.5 77.8 75.4 74.1 70.9 65.5 62.4 61.0 61.9 55.6 67.3 55.1 55.2 53.7 53.7 51.4 48.9 48.5 47.3 46.0 44.2
q
66.4 75.2 64.0 70.9 74.4 73.0 72.5 70.7 67.9 65.4 62.4 59.4 58.8 57.4 62.2 58.2 57.8 56.3 55.7 55.3 52.7 51.8 50.4 49.5 46.8

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

56/61

44.8 41.0 38.2 34.7 32.2


48.7 43.9 40.8 35.9 31.7
49.9 46.6 44.7 41.4 38.4
52.0 48.0 46.2 42.6 38.3
44.5 41.4 38.5 34.8 31.3
47.8 44.6 44.5 38.5 33.4
50.7 46.8 44.6 40.3 35.1
50.7 47.8 46.3 43.2 40.3
49.1 46.2 43.2 40.6 39.4
48.9 46.7 44.7 41.5 39.7
52.0 50.0 47.3 45.7 44.7
53.0 50.2 47.9 45.6 43.9
50.5 47.6 45.2 42.8 41.1
43.8 39.9 36.7 33.1 30.9
41.9 43.8 48.3 51.3 53.3
42.8 44.6 49.1 52.0 54.3
45.5 44.2 45.9 47.7 49.2

44.8
48.7
49.9
52.0
44.5
47.8
50.7
50.7
49.1
48.9
52.0
53.0
50.5
43.8
41.9
42.8
45.5

41.0
43.9
46.6
48.0
41.4
44.6
46.8
47.8
46.2
46.7
50.0
50.2
47.6
39.9
43.8
44.6
44.2

38.2
40.8
44.7
46.2
38.5
44.5
44.6
46.3
43.2
44.7
47.3
47.9
45.2
36.7
48.3
49.1
45.9

34.7
35.9
41.4
42.6
34.8
38.5
40.3
43.2
40.6
41.5
45.7
45.6
42.8
33.1
51.3
52.0
47.7

32.2
31.7
38.4
38.3
31.3
33.4
35.1
40.3
39.4
39.7
44.7
43.9
41.1
30.9
53.3
54.3
49.2

Noise acceptance test Far Field T-Power Tessenderlo

Copy values
a
57.4
b
60.1
c
59.6
d
63.4
e
55.6
f
57.6
g
66.1
h
68.6
i
74.2
j
61.9
k
71.9
l
70.5
m
67.0
n
61.7
o
65.6
p
66.9
q
66.4

80.1
72.1
73.0
65.8
67.6
62.6
62.1
65.9
69.0
66.4
69.0
65.9
68.2
69.8
72.9
77.8
75.2

62.4
61.3
62.8
63.1
61.5
60.1
61.9
62.3
63.4
65.1
63.8
63.4
61.7
59.3
64.2
66.4
64.0

67.1
64.0
64.2
64.6
63.2
60.8
60.7
61.1
59.7
61.1
63.0
61.9
63.5
64.9
69.8
71.2
70.9

67.8
71.3
60.5
67.1
61.3
61.8
57.6
63.8
56.6
61.1
62.7
64.1
65.5
66.7
77.3
74.5
74.4

65.3
66.7
65.2
64.1
62.6
60.8
55.6
61.7
61.1
55.5
63.3
64.3
67.1
68.9
74.6
77.8
73.0

Siemens NV Energy

66.9
68.3
63.3
62.8
63.2
61.0
59.7
63.0
60.9
62.9
63.8
66.5
68.2
69.5
74.4
75.4
72.5

65.2
62.8
60.0
59.0
57.9
56.8
51.9
57.9
53.1
56.7
60.1
60.5
65.3
67.6
71.7
74.1
70.7

61.9
61.6
57.9
55.9
53.2
52.8
54.0
59.2
58.0
54.2
56.7
59.1
62.0
63.7
68.7
70.9
67.9

62.5
60.1
57.4
54.6
52.9
50.0
51.8
55.3
57.7
57.1
60.5
59.1
58.9
58.7
64.9
65.5
65.4

56.5
54.5
53.9
51.8
50.0
45.5
49.3
53.2
53.4
53.7
54.8
55.9
55.9
55.9
60.4
62.4
62.4

53.2
51.7
50.8
49.9
48.6
48.2
49.5
54.8
53.4
50.6
53.4
55.6
54.1
52.3
57.7
61.0
59.4

Step 1: L p = mean level on measu re ment line


67.3 72.6 63.1 65.8 69.6 69.4 68.7 66.3 63.4 60.5 56.8 54.8

5 1.1
5 2.4
5 0.7
5 2.3
4 8.8
4 9.5
4 9.6
5 4.7
5 6.3
5 2.0
5 5.6
6 1.2
5 8.6
5 0.8
5 6.7
6 1.9
5 8.8

50.2
49.6
49.1
47.1
46.1
45.3
44.7
52.4
52.1
48.0
50.0
51.9
50.3
48.7
53.0
55.6
57.4

51.8
50.8
53.6
50.1
49.2
47.6
51.7
56.5
53.5
47.5
51.1
50.7
50.2
50.2
54.6
67.3
62.2

51.9
50.6
49.1
48.5
48.2
47.3
50.3
55.1
51.7
46.1
49.7
50.5
49.4
48.6
53.7
55.1
58.2

51 .3
51 .0
48 .2
47 .9
45 .8
43 .5
47 .9
52 .2
45 .9
45 .4
49 .3
57 .0
54 .5
48 .7
54 .3
55 .2
57 .8

50 .6
49 .4
49 .9
48 .3
49 .3
49 .3
53 .0
54 .3
47 .1
45 .8
50 .7
50 .6
48 .9
46 .3
51 .7
53 .7
56 .3

49 .5
49 .8
49 .3
47 .9
46 .7
46 .7
50 .9
51 .7
48 .4
45 .8
50 .8
50 .6
49 .2
47 .9
51 .7
53 .7
55 .7

53.1
53.7
54.5
54.4
51.9
54.4
57.0
57.5
54.0
48.4
53.6
54.6
52.0
46.2
49.5
51.4
55.3

47.7
49.7
50.7
51.2
49.2
49.8
53.1
53.6
49.6
49.5
52.9
53.0
50.1
44.6
46.9
48.9
52.7

50.0
51.1
52.2
52.1
50.2
52.0
55.0
55.8
51.5
50.5
53.2
53.7
51.2
46.0
46.8
48.5
51.8

50.3
52.6
54.0
54.0
49.5
52.4
55.2
54.5
50.4
50.1
52.9
53.8
51.3
44.9
45.3
47.3
50.4

51.0
54.3
54.9
54.6
49.6
53.0
57.0
55.1
51.2
51.0
55.1
55.0
52.5
46.3
44.5
46.0
49.5

46.8
50.7
50.5
52.3
45.8
48.7
52.1
51.6
50.2
50.4
53.5
53.9
51.4
45.3
43.0
44.2
46.8

41.0
43.9
46.6
48.0
41.4
44.6
46.8
47.8
46.2
46.7
50.0
50.2
47.6
39.9
43.8
44.6
44.2

38.2
40.8
44.7
46.2
38.5
44.5
44.6
46.3
43.2
44.7
47.3
47.9
45.2
36.7
48.3
49.1
45.9

34.7
35.9
41.4
42.6
34.8
38.5
40.3
43.2
40.6
41.5
45.7
45.6
42.8
33.1
51.3
52.0
47.7

32.2
31.7
38.4
38.3
31.3
33.4
35.1
40.3
39.4
39.7
44.7
43.9
41.1
30.9
53.3
54.3
49.2

5 6.2 51.5 57.4 52.1 52 .3 51 .2 50 .6 53.8 50.8 51.9 52.0 53.0 50.3 49.2 46.4 45.4 45.1 46.1

Step 2: differance between highest level in position h (65.1 dB(A)) and lowest level in positio n n (5 7.5 dB(A)) is < 10 dB(A), so OK
If the 1 /3 o ctave leve l in the measurement position x is 5 dB high er tha n the mean 1/3 octave level Lp, re place that level by the level Lp + 5 dB
a
57.4 77.6 62.4 67.1 67.8 65.3 66.9 65.2 61.9 62.5 56.5 53.2 5 1.1 50.2 51.8 51.9 51 .3 50 .6 49 .5 53.1 47.7 50.0 50.3 51.0 46.8
b
60.1 72.1 61.3 64.0 71.3 66.7 68.3 62.8 61.6 60.1 54.5 51.7 5 2.4 49.6 50.8 50.6 51 .0 49 .4 49 .8 53.7 49.7 51.1 52.6 54.3 50.7
c
59.6 73.0 62.8 64.2 60.5 65.2 63.3 60.0 57.9 57.4 53.9 50.8 5 0.7 49.1 53.6 49.1 48 .2 49 .9 49 .3 54.5 50.7 52.2 54.0 54.9 50.5
d
63.4 65.8 63.1 64.6 67.1 64.1 62.8 59.0 55.9 54.6 51.8 49.9 5 2.3 47.1 50.1 48.5 47 .9 48 .3 47 .9 54.4 51.2 52.1 54.0 54.6 52.3
e
55.6 67.6 61.5 63.2 61.3 62.6 63.2 57.9 53.2 52.9 50.0 48.6 4 8.8 46.1 49.2 48.2 45 .8 49 .3 46 .7 51.9 49.2 50.2 49.5 49.6 45.8
f
57.6 62.6 60.1 60.8 61.8 60.8 61.0 56.8 52.8 50.0 45.5 48.2 4 9.5 45.3 47.6 47.3 43 .5 49 .3 46 .7 54.4 49.8 52.0 52.4 53.0 48.7
g
66.1 62.1 61.9 60.7 57.6 55.6 59.7 51.9 54.0 51.8 49.3 49.5 4 9.6 44.7 51.7 50.3 47 .9 53 .0 50 .9 57.0 53.1 55.0 55.2 57.0 52.1
h
68.6 65.9 62.3 61.1 63.8 61.7 63.0 57.9 59.2 55.3 53.2 54.8 5 4.7 52.4 56.5 55.1 52 .2 54 .3 51 .7 57.5 53.6 55.8 54.5 55.1 51.6
i
72.3 69.0 63.4 59.7 56.6 61.1 60.9 53.1 58.0 57.7 53.4 53.4 5 6.3 52.1 53.5 51.7 45 .9 47 .1 48 .4 54.0 49.6 51.5 50.4 51.2 50.2
j
61.9 66.4 65.1 61.1 61.1 55.5 62.9 56.7 54.2 57.1 53.7 50.6 5 2.0 48.0 47.5 46.1 45 .4 45 .8 45 .8 48.4 49.5 50.5 50.1 51.0 50.4
k
71.9 69.0 63.8 63.0 62.7 63.3 63.8 60.1 56.7 60.5 54.8 53.4 5 5.6 50.0 51.1 49.7 49 .3 50 .7 50 .8 53.6 52.9 53.2 52.9 55.1 53.5
l
70.5 65.9 63.4 61.9 64.1 64.3 66.5 60.5 59.1 59.1 55.9 55.6 6 1.2 51.9 50.7 50.5 57 .0 50 .6 50 .6 54.6 53.0 53.7 53.8 55.0 53.9
m
67.0 68.2 61.7 63.5 65.5 67.1 68.2 65.3 62.0 58.9 55.9 54.1 5 8.6 50.3 50.2 49.4 54 .5 48 .9 49 .2 52.0 50.1 51.2 51.3 52.5 51.4
n
61.7 69.8 59.3 64.9 66.7 68.9 69.5 67.6 63.7 58.7 55.9 52.3 5 0.8 48.7 50.2 48.6 48 .7 46 .3 47 .9 46.2 44.6 46.0 44.9 46.3 45.3
o
65.6 72.9 64.2 69.8 74.6 74.4 73.7 71.3 68.4 64.9 60.4 57.7 5 6.7 53.0 54.6 53.7 54 .3 51 .7 51 .7 49.5 46.9 46.8 45.3 44.5 43.0
p
66.9 77.6 66.4 70.8 74.5 74.4 73.7 71.3 68.4 65.5 61.8 59.8 6 1.2 55.6 62.4 55.1 55 .2 53 .7 53 .7 51.4 48.9 48.5 47.3 46.0 44.2
q
66.4 75.2 64.0 70.8 74.4 73.0 72.5 70.7 67.9 65.4 61.8 59.4 5 8.8 56.5 62.2 57.1 57 .3 56 .2 55 .6 55.3 52.7 51.8 50.4 49.5 46.8

SGS Belgium NV
Reportnumber : 11.0029-1-v6

44.8
48.7
49.9
52.0
44.5
47.8
50.7
50.7
49.1
48.9
52.0
53.0
50.5
43.8
41.9
42.8
45.5

25/09/2011
final report version 3

57/61

44.8
48.7
49.9
52.0
44.5
47.8
50.7
50.7
49.1
48.9
52.0
53.0
50.5
43.8
41.9
42.8
45.5

41.0
43.9
46.6
48.0
41.4
44.6
46.8
47.8
46.2
46.7
50.0
50.2
47.6
39.9
43.8
44.6
44.2

38.2
40.8
44.7
46.2
38.5
44.5
44.6
46.3
43.2
44.7
47.3
47.9
45.2
36.7
48.3
49.1
45.9

34.7
35.9
41.4
42.6
34.8
38.5
40.3
43.2
40.6
41.5
45.7
45.6
42.8
33.1
50.1
50.1
47.7

32.2
31.7
38.4
38.3
31.3
33.4
35.1
40.3
39.4
39.7
44.7
43.9
41.1
30.9
51.1
51.1
49.2

LpA
60.9
62.4
63.1
63.3
59.6
61.7
64.8
65.1
61.7
60.4
63.9
64.8
62.4
57.5
61.5
65.0
64.9

63.0

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Step 3: Lp = mean of corrigated levels (step 2) on measurement line


66.8 71.9 63.1 65.7 68.8 68.2 68.2 65.4 62.7 60.5 56.5 54.6

56.0 51.3 55.3 51.8 52.2 51.2 50.6 53.8 50.8 51.9 52.0 53.0 50.3 49.2 46.4 45.4 44.4 44.3

Step 4: calculation surface factor Ls = 10xLOG ((2xSm + h.l)/So)


with Sm = measuring surface = 170x182 =
h = meausuring hight =
l = lenght off measuring line = 2x170+2x182 =
So = reference surface =

m
7m
704 m
1 m

48.2

30940

Step 5: calculation near field factor L F = LOG ((d/(4x?Sp))


with d = mean measurement distance between Sm and Sp
51.8 m
Sp = source surface = ground surface of rectangle around UMC+UHA+UMX+ULA+UBF = 45 x 143m
6435 m

-0.792

Step 6: calculation microphone factor LM = 0


LM = 0 because of the use of a omnidirectional microphone
Step 7: calculation air absorption factor L = 0.5 x a lu x ?Sm
with Sm = measuring surface = 200x191 =
38200 m
alu = air absorption according to ISO 9613-1 51993) at 70% relative humidity and 10C according to guide line Emola Begis LNE (Flanders environmental legislation)
12 16 20 25 31 40 50 63 80 100 125 160 200 250 315 400 500 630 800 1 k 1.25 k 1.6 k 2 k 2.5 k3.15 k 4 k 5 k 6.3 k 8 k 10 k
dB/km

0.079

0.079

0.079

0.079

0.079

0.079

0.079

0.122

0.186

0.280

0.411

0.584

0.797

1.040

1.310

1.600

1.930

2.330

2.870

3.660

4.860

6.730

9.66

14. 30

21.50

32.80

50.20

76.90

117.00

175.00

dB/m

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.000

0.001

0.001

0.001

0.001

0.002

0.002

0.002

0.003

0.004

0.005

0.007

0.010

0.014

0.022

0.033

0. 050

0.077

0.117

0.175

80
dB

100 125 160


dB dB dB

200
dB

250 315 400 500 630 800 1 k 1.25 k1.6 k 2 k 2.5 k3.15 k 4 k
dB dB dB dB dB dB dB dB dB dB dB dB dB

Step 8: calculation LwA = Lp + Ls + LF + LM + L


LwA

12
dB

16
dB

20
dB

25
dB

31
dB

40
dB

50
dB

63
dB

114.3 119.3 110.6 113.2 116.3 115.7 115.7 112.9 110.2 108.0 104.0 102.0

SGS Belgium NV
Reportnumber : 11.0029-1-v6

5 k 6.3 k 8 k 10 k
dB dB dB dB

LwA
dB(A)

103.5 98.7 102.8 99.3 99.7 98.7 98.0 101.3 98.2 99.4 99.4 100.5 97.7 96.7 93.9 92.9 91.9 91.9

110.3

25/09/2011
final report version 3

58/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Annex 9: Background measurements in BP13

Date

Periode (hour)

Winddir.windspeed rainfall?

LAeq

LAmax

LAmin

LA01

LA05

LA50

LA90

LA95

LA99

SEL

3/08/2011

22

23

47.5

68.9

44.2

52.0

49.2

48.3

46.8

45.2

45.0

83.1

3/08/2011

23

46.5

56.2

44.0

49.0

47.9

47.6

46.4

45.1

44.4

82.1

---

4/08/2011

46.9

56.8

44.4

49.1

48.1

47.9

46.8

45.5

45.1

82.5

---

4/08/2011

46.7

53.0

44.6

48.6

47.9

47.7

46.6

45.3

45.1

82.3

---

4/08/2011

46.8

49.4

44.3

48.6

47.9

47.8

46.8

45.3

45.0

82.4

---

4/08/2011

46.5

54.8

42.4

48.9

48.0

47.8

46.4

44.2

43.3

82.1

---

4/08/2011

46.9

59.6

42.7

51.1

48.0

47.8

46.7

45.1

43.4

82.5

---

4/08/2011

48.2

58.2

44.5

53.8

50.4

49.3

47.6

46.2

45.6

83.7

---

4/08/2011

48.3

66.7

45.3

51.8

50.1

49.6

48.0

46.4

46.1

83.9

---

4/08/2011

49.0

65.1

45.2

54.6

51.4

50.3

48.3

46.6

46.1

84.5

---

4/08/2011

48.3

67.1

42.9

55.2

51.4

50.0

46.9

44.5

44.0

83.9

---

4/08/2011

10

48.8

73.0

42.0

58.5

53.0

50.8

45.9

43.6

43.0

84.4

SSW

4/08/2011

10

11

53.6

75.5

41.4

67.7

55.2

51.6

45.6

43.2

42.3

89.1

SW

0.4

4/08/2011

11

12

51.0

77.6

41.6

58.2

51.8

49.8

45.7

43.3

42.6

86.5

WSW

0.4

4/08/2011

12

13

51.6

78.1

38.6

62.9

52.7

49.9

44.3

41.4

40.3

87.2

WSW

4/08/2011

13

14

47.5

63.0

38.4

57.6

52.7

50.0

44.5

41.6

40.6

83.1

WSW

0.4

4/08/2011

14

15

46.3

65.7

40.6

54.5

49.5

47.9

44.5

42.2

41.5

81.9

WSW

0.4

4/08/2011

15

16

47.9

70.4

39.4

59.1

51.1

48.6

44.3

41.5

40.6

83.5

WSW

4/08/2011

16

17

50.6

80.9

40.3

60.4

53.7

51.2

44.9

42.2

41.4

86.2

SW

4/08/2011

17

18

47.8

62.5

41.1

59.1

50.3

48.7

46.2

43.6

42.5

83.4

SW

0.4

4/08/2011

18

19

55.0

72.3

42.4

65.6

61.6

60.1

49.1

44.1

43.2

90.6

SW

4/08/2011

19

20

47.2

58.9

43.2

52.1

49.8

48.9

46.6

44.6

44.1

82.8

SW

0.4

4/08/2011

20

21

47.8

69.4

42.4

55.4

49.9

49.2

46.0

43.9

43.2

83.4

SW

1.3

4/08/2011

21

22

47.8

74.3

43.9

55.1

49.7

48.7

46.5

45.0

44.3

83.4

SW

4/08/2011

22

23

47.5

56.9

42.1

53.7

52.5

51.5

45.5

43.7

43.1

83.1

SW

4/08/2011

23

45.1

56.3

41.8

47.9

46.9

46.5

44.9

43.2

42.6

80.7

SW

5/08/2011

46.5

56.8

42.3

52.6

51.0

48.7

45.5

43.5

43.1

82.1

SW

5/08/2011

45.0

56.6

41.1

47.9

46.7

46.1

44.9

43.1

42.1

80.6

SW

5/08/2011

45.7

57.4

42.0

49.0

47.0

46.8

45.5

44.0

43.1

81.2

SW

5/08/2011

45.6

55.0

42.3

50.5

47.7

46.9

45.3

43.5

43.1

81.2

SW

0.4

5/08/2011

44.6

54.0

41.3

47.8

46.5

45.9

44.4

42.8

42.1

80.2

5/08/2011

45.7

62.8

41.1

53.1

49.0

47.2

44.5

42.6

42.1

81.3

5/08/2011

46.2

63.7

42.6

52.0

49.0

47.8

45.4

43.7

43.1

81.8

5/08/2011

48.4

70.8

42.7

56.1

51.8

50.3

46.7

44.4

43.8

83.9

5/08/2011

50.3

75.8

43.2

59.1

54.1

52.2

47.5

45.1

44.2

85.9

5/08/2011

10

49.0

66.9

43.4

57.3

53.1

51.0

46.6

44.5

44.1

84.6

5/08/2011

10

11

51.3

74.0

41.8

63.6

55.4

51.3

46.3

44.0

43.1

86.9

5/08/2011

11

12

48.0

72.7

42.3

55.8

51.8

49.9

46.2

44.1

43.3

83.6

5/08/2011

12

13

47.1

68.1

41.6

55.9

50.5

48.0

44.9

43.1

42.4

82.6

5/08/2011

13

14

50.1

66.9

42.1

60.8

55.7

52.3

46.7

43.7

43.1

85.7

5/08/2011

14

15

47.3

68.4

40.1

56.9

51.3

48.8

44.6

42.1

41.2

82.8

5/08/2011

15

16

46.2

68.6

40.4

54.0

50.3

48.2

44.1

42.1

41.3

81.7

5/08/2011

16

17

47.0

68.7

39.9

56.1

50.3

48.5

43.9

41.5

41.0

82.6

5/08/2011

17

18

46.8

69.5

38.6

55.1

48.9

46.8

43.3

41.2

40.2

82.4

5/08/2011

18

19

45.5

67.0

39.6

53.5

48.9

47.1

43.7

41.5

41.0

80.1

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N

59/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Long term noise measurements in a fixed position


Bedrijf :
Siemens - Tpower Tessenderlo
Meetpunt : BP13 - background measurement
Periode : 03 till 05/08/2011

Project :
Positie :
Operator :

wo 03/08/11

11.0029

NE to Tpower
Bert De Winter

do 04/08/11

vr 05/08/11

80

LA95,1h [dB(A)]

70

60

50

40

30

20
0:00

23:00

22:00

21:00

20:00

19:00

18:00

17:00

16:00

15:00

14:00

13:00

12:00

11:00

10:00

9:00

8:00

7:00

6:00

5:00

4:00

3:00

2:00

1:00

0:00

Tijd [uur]

wo 03/08/11

do 04/08/11

vr 05/08/11

80

LAeq,1min [dB(A)]

70

60

50

40

30

20
0:00

23:00

22:00

21:00

20:00

19:00

18:00

17:00

16:00

15:00

14:00

13:00

12:00

11:00

10:00

9:00

8:00

7:00

6:00

5:00

4:00

3:00

2:00

1:00

0:00

Tijd [uur]

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

60/61

Noise acceptance test Far Field T-Power Tessenderlo

Siemens NV Energy

Long term noise measurements in a fixed position


Bedrijf :
Meetpunt :
Periode :

Meteoconditions

Siemens - Tpower Tessenderlo


BP13 - background measurement
03 till 05/08/2011

Project :
Positie :
Operator :

wind speeds

11.0029

NE t.o.v. het bedrijf


Bert De Winter

Deviation wind speed for BP13 - background measurement in period 03/08/11 - 05/08/11
100

windspeed (m/s)deviation (1/4u) deviation (%)


0.0
88
73.30
1.0
28
23.30
2.0
4
3.30
3.0
0
0.00
4.0
0
0.00
5.0
6.0

0
0

0.00
0.00

7.0
8.0

0
0

0.00
0.00

9.0
10.0

0
0

0.00
0.00

total

120

<= 5 m/s

120

100.0 %

> 5 m/s

0.0 %

90
80
70
60
50
40
30
20
10
0
0

10

Deviation wind direction in BP13 - background measurement for period 03/08/11 - 05/08/11

Deviation wind direction


N

wind direction deviation (1/4u) deviation (%)


N
4
3.3 %
NNO
NO

0
0

0.0 %
0.0 %

ONO
O
OZO
ZO
ZZO

0
0
0
0
0

0.0 %
0.0 %
0.0 %
0.0 %
0.0 %

Z
ZZW

40
4

33.3 %
3.3 %

ZW
WZW

52
20

43.3 %
16.7 %

W
WNW

0
0

0.0 %
0.0 %

NW
NNW

0
0

0.0 %
0.0 %

NNW

45 %
40 %

NNO

35 %
30 %

NW

NO

25 %
20 %

WNW

ONO

15 %
10 %
5%
0%

WZW

OZO

ZO

ZW
ZZW

ZZO
Z

SGS Belgium NV
Reportnumber : 11.0029-1-v6

25/09/2011
final report version 3

61/61

You might also like