Questionnaire for calculation of Roller Table Drives
-----------------------------------------------------------------------------------------------------------Project: Replacement of geared -----------------------------------------------------------------------------------------------------------Drive conditions: Roller OD of the cylindrical roller (mm) : ID of the cylindrical roller (mm) : Length of roller (m) : Conveying speed (m/s) : Roller speed /min) : Distance between roller centres (m) : Number of idle rollers to be accelerated by a drive : Mass moment of inertia of the roller (if known) (kgm2) : Stall time : Support and conveying conditions Total weight (kg) : Weight per meter (optional) (kg/m) : Total length (m) : Temperature (oC) : Stiffness to assess support (subjective judgment ) : Number of load carrying roller (if known) : Factor of sliding friction (if known) : Working against bumper Skidding rqud/ not rqud/ permissible/ not permissible Number of operations against bumper per hour (c/h) : Duration of one operation against bumper (min) : Operating cycle Cycles per hour of
startings (DOL) (c/h) Pluggings (c/h) Dc injection brakings (c/h) Reversals (DOL) (c/h) Ramped frequency Startings (c/h) Brakings (c/h) Reversals (c/h) Cyclic duration factor ED (%)
: : : : : : : :
Expected type of drive:
Foot mounted gear box to drive the roller via coupling Shaft mounted hollow shaft with key/shrink disc Motor ventilated IC41/non ventilated IC40 Adjustable frequency in the range