Professional Documents
Culture Documents
DOOR TYPE
DESCRIPTION
D-02
D-03
D-04
NOTES
GENERAL
Ground Floor
170
31 31
108 86
FINISHES SCHEDULE.
161
412
40mm
Carved
rosette
motif(coral
rock
Veneered faced
12mm thick block
board
door panel
1.FLOOR FINISHES.
a. 200mm thick coral aggregate slab to SE's details treated with
hardener/sealer, laid
to falls with a ribbed finish.
b. 6 mm thick polished terrazzo laid on lime mortar screed,50% chops, with
25x3mm dividing strips set off to architects approval.
Total floor slab thickness=200mm.
c. 400mm x200 mm x30mm granito tiles on 1:4 mortar mix, laid on lime
mortar
screed.
Total floor slab thickness=200mm.
d. 300x300 x10mm thick glazed ceramic tiles
e. Approved 200*65*20mm mahogany parquet flooring in
approved pattern laid
with adhesive on 20mm 1:4 lime sand screed.
f. 20mm thick random cut mazeras stone on lime mortar screed
g.40mm screed smooth finish.
61
110
244
119
26
114
88
217
91
114
26
119
244
117
21
61
58
mushrabiyy
ah
transom
29
150
ex.50mmx50mm
mpingo inner frame
with rectilinear relief
at the straight edge.
150
58
150
58
150
58
4,000
58
150
570
720
820
150
58
150
58
150
58
150
58
.
Finished floor level
75
50
50
150
75
58
50
50
Brass
studs
bolted
into
timber
panel.
150
200
.
Finished floor level
1800
mm
wide
opening
Finished
floor
level
SSS
IRON
MONGERY
SCHEDULE
NO
. HN -SBB-403020
CATALOGUE SSO - 1)
CATALOGUE NO
. DS - 01
SN )
SSS
NO
. HN -SBB-403020
CATALOGUE SSO - 1)
CATALOGUE NO
. DS - 01
SN )
84 58
150
75
50
50
200
11/2pairs100 mm
.
steel butt hinges.
200
670
820
920
2.WALL FINISHES.
a.12mm thick lime wash coat on lime plaster, treated with
water proofing
admixture. Coats applied to manufacturers' specifications.
b. Moulded mahogany timber railing above coral stone walling 1000mm from
finished floor level
c. Exposed random cut coral stone
d. 300mm x300mm x20mm thick glazed ceramic tiles 1200mm high with
100mm
straight continuous joints in both directions fixed with adhesive
on rendered
background with grouting to approval.
e.Coral lime plaster finish containing egg white (2 to 3
coats)
f. Emulsion paint.
g. Moulded mahogany timber railing 1200mm high.
3.SKIRTING FINISHES
a. 300mm x100mm thick ceramic tiles.
b. 10mm Lime mortar on 25mm thick lime mortar screed.
c. 150mm high polished in-situ terrazzo
d. ex.150mm x25mm thick Mangrove nailed on wall.
e. 100mm x25mm dressed coral stone tiles
f. Random cut and stacked mazeras stones.
58
1,178
1,178
200
.
Finished floor level
75
Lime
stucco
plasterwor
k
architects
approval
58
'
' cylinder lock
UNION
11/2pairs100mm
.
steel butt hinges
50
50
150
1,760
2,110
cylinder lock
mvule timber
panels
tongue and
grooved
together
ex. 150mmx
100 mm mvule
door post carved
with wavy motifs
denoting the
.
ocean
1510
2,110
1,760
1,760
2,110
2,110
1,760
2110
ELEVATION
226
12 27
27 12
25 23 25
75
1,800
68
12 27
27 12
25 23 25
2870
4.CEILING FINISH
a. 9mm first coat 1:4 lime/sand screed and 3mm second
coat of lime plaster,
smooth trowelled on structural slab.
b. Painted waterproofed rough cast lime finish
c. Mahogany timber strips T&G
d. Emulsion paint.
e.25mm thick suspended gypsum ceiling board and plaster
on lime soffit
f.Square cut mangrove(boriti) planks alternate with lime infill.
SSS
NO
. HN -SBB-403020
REVISIONS
NO. DATE
LEGEND
. DS - 01
DA - H
CATALOGUE NO . X 8513
DA - H
CATALOGUE NO . X 8513
SN )
DA - H
floor finish
wall finish
1 2
3 4
f).hold open door double action floor spring (UNION f).hold open door double action floor spring (UNION f).hold open door double action floor spring (UNION
CATALOGUE NO . X 8513
DESCRIPTION
Not applicable.
CATALOGUE SSO - 1)
CATALOGUE NO
STRUCTURAL WORKS.
1. Depth of foundation to be determined on site to S.E's approval.
2. For all Coral aggregate reinforcement works refer to Structural Engineers details.
3. All adjascent Coral aggregate reinforcement works and masonry walls to be tied
with strap wrought iron at every course.
4. All walls less than 200mm thick to be reinforced with hoop wrought iron at every
alternate course.
ELECTRICAL:
1. All conduits must be laid before plastering.
150
75
50
75
50
100mm*
100mm
banaa
flying
above the
entrance
58
Veneered faced
12 mm thick block
board
door panel
50
50
820
720
570
100
50
50
75
50
100
75
920
820
670
[D-07/01] Open
100
50
50
100
50
ex 50mmx50mm
.
mpingo inner frame
with rectilinear relief
at the straight edge
50
50
0.
CIVIL WORKS.
1. All slabs at ground level to be poured over 1000 gauge polythene sheeting on
50-75mm coral screed on 50-100mm hardcore(coral rag base).
2. All soils under slab to be treated for termite control.
3. All soils on cut embarkments to be stabilised. The slope should not exceed
natural angle of repose.
MECHANICAL.
1.All plumbing and drainage to comply with LamuCountyCouncil
specifications.
2.All service ducts to be accesible fromall floors.
3. SVP denotes soil vent pipe to be provided at at the head of drainage
4. Drains passing beneath buildings and walkways to be encased in 150mm
concrete surround.
5. All underground foul and waste drain pipes to be class 41 golden brown pvc pipe
6. Minimum slope in the drain to be 1%
7.All mechanical work must be coordinated with electrical and any
conflictsbe
clarified before work begins.
PLAN
ceiling finish
skirting finish
PROJECT:
[01/01]
width
permanent
ventilation
door type
door number
CONSERVATION OF MBARAK
[ground floor.]
-w /c cubicals
DRAWING TITLE:
DOOR SCHEDULE
DRAWING BY:
20 NO.
3 NO.
DOOR SCHEDULE
GSPublisherEngine 0.3.100.100
AB241-0635/2011
8 NO.
1 NO.
DRAWING NATURE:
WORKING DRAWING
PAPER SIZE:
A1
SHEET NO.
Worksheet
1:100
12
D-05
NOTES
GENERAL
1.Drawings not to be scaled. Only figured dimensions to beused.
2. All dimensions are shown in mm unless otherwise stated.
3. P.V. denotes permanent vent.
CIVIL WORKS.
1. All slabs at ground level to be poured over 1000 gauge polythene sheeting on
50-75mm coral screed on 50-100mm hardcore(coral rag base).
2. All soils under slab to be treated for termite control.
3. All soils on cut embarkments to be stabilised. The slope should not exceed
natural angle of repose.
Beamto S.E.details
frame.
STRUCTURAL WORKS.
1. Depth of foundation to be determined on site to S.E's approval.
2. For all Coral aggregate reinforcement works refer to Structural Engineers details.
3. All adjascent Coral aggregate reinforcement works and masonry walls to be tied
with strap wrought iron at every course.
4. All walls less than 200mm thick to be reinforced with hoop wrought iron at every
alternate course.
panel as per
schedule
Mastic asphalt pointing
ex 25x125mm thick
51
1,760
2,110
200
200
100
1,178
2,110
1,760
75
570
720
820
75
50
50
m hardwood
(mangrove)
architrave
75mmthick Mvule
panels held to
togetherby thebrass
studs
SCALE: 1:25
Scale 1:1.25
32
structural
88
DA - H
Engineers
15
59
75mmx20m
m hardwood
(mangrove)
architrave
details
10 20
200x10mm
pull handle
on both sides
1 2
3 4
25mm timber
61
ceiling finish
skirting finish
[01/01]
width
permanent
ventilation
door type
door number
CONSERVATION OF MBARAK
HINAWY STREET, MOMBASA
12
OLD TOWN.
DRAWING TITLE:
pointing
DOOR SCHEDULE,
DOOR & WINDOW FIXING
DETAILS
SCALE:
1:100, 1:50
DATE:
DRAWING BY:
111
floor finish
wall finish
53
10x10mm lock
keeper
2 NO.
LEGEND
Mastic asphalt
panel as per
49
Rugged end
wrought iron
tail piece anchor
cast insitu.
81
125
DESCRIPTION
REVISIONS
NO. DATE
PROJECT:
Scale 1:2.5
applied to manufacturers'
GSPublisherEngine 0.3.100.100
cast in situ
schedule.
4.CEILING FINISH
a. 9mm first coat 1:4 lime/sand screed and 3mm second
coat of lime plaster,
smooth trowelled on structural slab.
b. Painted waterproofed rough cast lime finish
c. Mahogany timber strips T&G
d. Emulsion paint.
e.25mm thick suspended gypsum ceiling board and plaster
on lime soffit
f.Square cut mangrove(boriti) planks alternate with lime infill.
SN )
R.C. beam to
ex.50mmx50mm
mpingo inner frame
with rectilinear relief
at the straight edge
CATALOGUE SSO - 1)
. DS - 01
51
191
12
155
10 13
6 14
. HN -SBB-403020
200
100
12
32
SSS
stone
1.FLOOR FINISHES.
a. 200mm thick coral aggregate slab to SE's details treated with
hardener/sealer, laid
to falls with a ribbed finish.
b. 6 mm thick polished terrazzo laid on lime mortar screed,50% chops, with
25x3mm dividing strips set off to architects approval.
Total floor slab thickness=200mm.
c. 400mm x200 mm x30mm granito tiles on 1:4 mortar mix, laid on lime
mortar
screed.
Total floor slab thickness=200mm.
d. 300x300 x10mm thick glazed ceramic tiles
e. Approved 200*65*20mm mahogany parquet flooring in
approved pattern laid
with adhesive on 20mm 1:4 lime sand screed.
f. 20mm thick random cut mazeras stone on lime mortar screed
g.40mm screed smooth finish.
2.WALL FINISHES.
a.12mm thick lime wash coat on lime plaster, treated with
water proofing
admixture. Coats applied to manufacturers' specifications.
b. Moulded mahogany timber railing above coral stone walling 1000mm from
finished floor level
c. Exposed random cut coral stone
d. 300mm x300mm x20mm thick glazed ceramic tiles 1200mm high with
100mm
straight continuous joints in both directions fixed with adhesive
on rendered
background with grouting to approval.
e.Coral lime plaster finish containing egg white (2 to 3
coats)
f. Emulsion paint.
g. Moulded mahogany timber railing 1200mm high.
3.SKIRTING FINISHES
a. 300mm x100mm thick ceramic tiles.
b. 10mm Lime mortar on 25mm thick lime mortar screed.
c. 150mm high polished in-situ terrazzo
d. ex.150mm x25mm thick Mangrove nailed on wall.
e. 100mm x25mm dressed coral stone tiles
f. Random cut and stacked mazeras stones.
SILL DETAIL
ex.50mmx50mm
mpingo inner frame
Softwood
with rectilinear relief
packings
at the straight edge
TIMBER DOOR HEAD DETAIL A 001
ex. 150mm
100mm mvule
door post carved
with wavy motifs
denoting the
.
ocean
.
Finished floor level
10 20
detail.
75mmx20m
mangrove
FINISHES SCHEDULE.
120
32
50
50
20
250x80mm bevelled
ELECTRICAL:
1. All conduits must be laid before plastering.
to Structural Engineer's
88
.
ex150mmx100mm
mangrove door frame
carved
with motifs.
120
12
6 10
15
32
80
8
13
timber bead
13
14
59
ex.50mmx50mm
mpingo inner frame
with rectilinear relief
at the straight edge
100
75
50
75
50
20mm quadrant
50
50
50
820
720
570
100
50
12 25
to approval
59
155
MECHANICAL.
1.All plumbing and drainage to comply with LamuCountyCouncil
specifications.
2.All service ducts to be accesible fromall floors.
3. SVP denotes soil vent pipe to be provided at at the head of drainage
4. Drains passing beneath buildings and walkways to be encased in 150mm
concrete surround.
5. All underground foul and waste drain pipes to be class 41 golden brown pvc pipe
6. Minimum slope in the drain to be 1%
7.All mechanical work must be coordinated with electrical and any
conflictsbe
clarified before work begins.
AB241-0635/2011
DRAWING NATURE:
WORKING DRAWING
PAPER SIZE:
A1
SHEET NO.
1
2
WINDOW TYPE
W-01
W-02
DESCRIPTION
PLAN
W-02
1,200
W-02
1,200
NOTES
GENERAL
1,200
1,200
ELECTRICAL:
1. All conduits must be laid before plastering.
FINISHES SCHEDULE.
LEVEL
GALVANISED
IRON MONGERY
architect's approval
50
100
SCALE 1:20
175
170
170
325
600 mm
approval
20
SCALE 1:20
20
50
25
540
20
280 20
20 325
20
1,700
100
20
20
20
20
25
175
175
175
175
175
250
2,400
250
lacquer coating
550
250
20
250
20
600
540
550
50
50
50
300
20 300
2,400
600 mm
600
flower
100 mm top rail of
1,200
50
50
40
25
50
385
20
50
20
lacquer coating
2000
20
385
385
1,700
2,400
385
,
.
approval
grooved to both
top
20 300
25
20
575
20
50
227
227
50
20 300
100
228
50
20 300
SCALE 1:20
400
600
700
ELEVATION
227
625
20
20 250
50
50
595
50
1800
540
20
20
1,200
575
50
575
50
20
50
20
50
50
225
225
225
225
50
2,400
540
50
50
600
600
600
1,200
5050
1,200
SCALE 1:20
GALVANISED
AND FINISHED IN LACQUER COATING
600 mm
600 mm
STAYS
.
1.FLOOR FINISHES.
a. 200mm thick coral aggregate slab to SE's details treated with
hardener/sealer, laid
to falls with a ribbed finish.
b. 6 mm thick polished terrazzo laid on lime mortar screed,50% chops, with
25x3mm dividing strips set off to architects approval.
Total floor slab thickness=200mm.
c. 400mm x200 mm x30mm granito tiles on 1:4 mortar mix, laid on lime
mortar
screed.
Total floor slab thickness=200mm.
d. 300x300 x10mm thick glazed ceramic tiles
e. Approved 200*65*20mm mahogany parquet flooring in
approved pattern laid
with adhesive on 20mm 1:4 lime sand screed.
f. 20mm thick random cut mazeras stone on lime mortar screed
g.40mm screed smooth finish.
2.WALL FINISHES.
a.12mm thick lime wash coat on lime plaster, treated with
water proofing
admixture. Coats applied to manufacturers' specifications.
b. Moulded mahogany timber railing above coral stone walling 1000mm from
finished floor level
c. Exposed random cut coral stone
d. 300mm x300mm x20mm thick glazed ceramic tiles 1200mm high with
100mm
straight continuous joints in both directions fixed with adhesive
on rendered
background with grouting to approval.
e.Coral lime plaster finish containing egg white (2 to 3
coats)
f. Emulsion paint.
g. Moulded mahogany timber railing 1200mm high.
3.SKIRTING FINISHES
a. 300mm x100mm thick ceramic tiles.
b. 10mm Lime mortar on 25mm thick lime mortar screed.
c. 150mm high polished in-situ terrazzo
d. ex.150mm x25mm thick Mangrove nailed on wall.
e. 100mm x25mm dressed coral stone tiles
f. Random cut and stacked mazeras stones.
4.CEILING FINISH
a. 9mm first coat 1:4 lime/sand screed and 3mm second
coat of lime plaster,
smooth trowelled on structural slab.
b. Painted waterproofed rough cast lime finish
c. Mahogany timber strips T&G
d. Emulsion paint.
e.25mm thick suspended gypsum ceiling board and plaster
on lime soffit
f.Square cut mangrove(boriti) planks alternate with lime infill.
REVISIONS
NO. DATE
LEGEND
floor finish
wall finish
1 2
3 4
NECESSARY
NECESSARY
NECESSARY
skirting finish
PROJECT:
[01/01]
width
permanent
ventilation
door type
door number
CONSERVATION OF MBARAK
HINAWY STREET, MOMBASA
OLD TOWN.
UNION
ceiling finish
DESCRIPTION
DRAWING TITLE:
ARCHITECT
WINDOW SCHEDULE
DATE:
-Windows on second floor on the facade -Windows on second floor, the Mbarak -Windows on third floor, exhibition
8
GSPublisherEngine 0.3.100.100
QUANTITY
4 NO.
2 NO.
2 NO.
4 NO.
DRAWING BY:
DRAWING NATURE:
WORKING DRAWING
PAPER SIZE:
A1
SHEET NO.
manroove (boriti)planks
200
170
125
170
125
170
125
3450 75
75
1,200
170
125
170
900
125
170
125
170
125
170
400
1,200
450
3,500
1,175
300x300x10 mm
thick ceramic
tiles
partitions
TYFORDS' Galerie countertop
715
2,390
2,410
900
AIR-LOCK
AIR-LOCK
2,100
900
2,100
CIVIL WORKS.
1. All slabs at ground level to be poured over 1000 gauge polythene sheeting on
50-75mm coral screed on 50-100mm hardcore(coral rag base).
2. All soils under slab to be treated for termite control.
3. All soils on cut embarkments to be stabilised. The slope should not exceed
natural angle of repose.
1,290
1,475
170
125
500
pv
800
2,100
170
125
GENTS 2,100
W/ROOM
800
pv
2,100
3a4c
170
125
pv
800
1d2c
170
125
1,800
1,110
1,110
pv
1,800
1,200
1,800
W/ROOM
1,200
pv
GENERAL
W1
900
LADIES
600
SECTION W 1
SCALE 1: 25
2,100
900
skirting 300x100 mm
+100
manufacturers' specifications.
Countersunk screw with chrome
srew cap
6 mm thick plate mirror at 80mm/cc
5 mm wide plywood backing
WASHROOM PLAN
manroove (boriti)planks
300
SCALE 1:25
125
170
125
170
125
170
125
170
125
170
125
300mmx300mmx20mm
glazed
1200mm
with 100mm
jointsinbothdirectionsfixedwith
adhesive
with
.
300mmx300mmx20mm thick
high with 100 mm straight
continuous joints in both
on rendered background with
Inspection
Trap
In-let
Out-let
grouting to approval.
400
1:25
100
LEGEND
12 mm thick lime wash coat on lime plaster treated with water proofing
admixture Coats applied to manufacturers' specifications.
( )002
300
Inspection chamber
Out-let pipe
SCALE 1:25
GSPublisherEngine 0.3.100.100
SCALE 1: 25
Elevation
Elevation
SCALE 1: 25
Building Section
[01/01]
CONSERVATION OF MBARAK
DRAWING TITLE:
WASHROOM DETAILS
SCALE:
1:100, 1:25
WASHHAND BASIN
SCALE 1: 25
DATE:
DRAWING BY:
E-66
skirting finish
width
permanent
ventilation
door type
door number
OLD TOWN.
TWYFORDS' double
Trap In-let
S:25
ceiling finish
S.E detail.
approval.
SECTION
1 2
3 4
PROJECT:
cement:sand screed to
SECTION W-W
floor finish
wall finish
320
DESCRIPTION
780
Elevation
2,100
600
140
cross ventilation.
1.FLOOR FINISHES.
a. 200mm thick coral aggregate slab to SE's details treated with
hardener/sealer, laid
to falls with a ribbed finish.
b. 6 mm thick polished terrazzo laid on lime mortar screed,50% chops, with
25x3mm dividing strips set off to architects approval.
Total floor slab thickness=200mm.
c. 400mm x200 mm x30mm granito tiles on 1:4 mortar mix, laid on lime
mortar
screed.
Total floor slab thickness=200mm.
d. 300x300 x10mm thick glazed ceramic tiles
e. Approved 200*65*20mm mahogany parquet flooring in
approved pattern laid
with adhesive on 20mm 1:4 lime sand screed.
f. 20mm thick random cut mazeras stone on lime mortar screed
g.40mm screed smooth finish.
40
3,500
3,500
1,505
1,372
300mmx300mmx20mm thick
FINISHES SCHEDULE.
ELECTRICAL:
1. All conduits must be laid before plastering.
REVISIONS
NO. DATE
SCALE 1 25
1,428
MIRROR FIXING A
1320
1460
595
mangroove (boriti)planks
to schedule
MECHANICAL.
1.All plumbing and drainage to comply with LamuCountyCouncil
specifications.
2.All service ducts to be accesible fromall floors.
3. SVP denotes soil vent pipe to be provided at at the head of drainage
4. Drains passing beneath buildings and walkways to be encased in 150mm
concrete surround.
5. All underground foul and waste drain pipes to be class 41 golden brown pvc pipe
6. Minimum slope in the drain to be 1%
7.All mechanical work must be coordinated with electrical and any
conflictsbe
clarified before work begins.
4.CEILING FINISH
a. 9mm first coat 1:4 lime/sand screed and 3mm second
coat of lime plaster,
smooth trowelled on structural slab.
b. Painted waterproofed rough cast lime finish
c. Mahogany timber strips T&G
d. Emulsion paint.
e.25mm thick suspended gypsum ceiling board and plaster
on lime soffit
f.Square cut mangrove(boriti) planks alternate with lime infill.
146 200
400 mm thick
300
STRUCTURAL WORKS.
1. Depth of foundation to be determined on site to S.E's approval.
2. For all Coral aggregate reinforcement works refer to Structural Engineers details.
3. All adjascent Coral aggregate reinforcement works and masonry walls to be tied
with strap wrought iron at every course.
4. All walls less than 200mm thick to be reinforced with hoop wrought iron at every
alternate course.
2.WALL FINISHES.
a.12mm thick lime wash coat on lime plaster, treated with
water proofing
admixture. Coats applied to manufacturers' specifications.
b. Moulded mahogany timber railing above coral stone walling 1000mm from
finished floor level
c. Exposed random cut coral stone
d. 300mm x300mm x20mm thick glazed ceramic tiles 1200mm high with
100mm
straight continuous joints in both directions fixed with adhesive
on rendered
background with grouting to approval.
e.Coral lime plaster finish containing egg white (2 to 3
coats)
f. Emulsion paint.
g. Moulded mahogany timber railing 1200mm high.
3.SKIRTING FINISHES
a. 300mm x100mm thick ceramic tiles.
b. 10mm Lime mortar on 25mm thick lime mortar screed.
c. 150mm high polished in-situ terrazzo
d. ex.150mm x25mm thick Mangrove nailed on wall.
e. 100mm x25mm dressed coral stone tiles
f. Random cut and stacked mazeras stones.
600
150
150
150
300 300
1,000 1,100 1,150 1,125
700
pv
NOTES
400
2,100
1,550
4,990
W1
3,100
-100 300
100
150
150
1,200
1,475
1,450
DRAWING NATURE:
WORKING DRAWING
PAPER SIZE:
A1
SHEET NO.
BALCONY DETAILS
NOTES
GENERAL
360
854
244
120
349
50
47
100 100
50
43
107
1,300
1,100
1818
17
17
17
5049 2017 2117
4012
100 79
105 147 104
61 61 61 61
61 61 61 61
61 61 61 61 61 61 61
19 39 39 39 396139 39 39 39 3961396139 39 39 39 39 39 39 21
320
50
250
350
50
50 50
100 100
50 100 50
50 100 50
1,804
320
47 100 50
approval
200 mm thick RC load bearing
Reinforcement structure to
channel painted to
approval.
ELECTRICAL:
1. All conduits must be laid before plastering.
SCALE 1 : 20
SCALE
1 : 20
STAIRCASE DETAILS
1250
150
2,790
250
150
1500
300
1800
laid on entry
lobby to
20
19
18
17
tread= 285 mm
riser = 175 mm
16
GROUND FLOOR
SHOPS&RESTAURANT LEVEL
15
22
14
17
16
21
15
20
14
13
19
18
granito tiles
12
polished
11
4800
1500
300mm *450mm
reinforced
coral rag beam to structural
engineer 's details to approval
300mm*300mm
10
FIRST FLOOR
OFFICES LEVEL
up
approval
Terrazzo finished trends and
risers with non-slip
STAIRCASE PLAN
SCALE1:10
20
175
285
15
0
17
0
Varnished terrazzo
floor finish
GSPublisherEngine 0.3.100.100
SCALE 1:10
4.CEILING FINISH
a. 9mm first coat 1:4 lime/sand screed and 3mm second
coat of lime plaster,
smooth trowelled on structural slab.
b. Painted waterproofed rough cast lime finish
c. Mahogany timber strips T&G
d. Emulsion paint.
e.25mm thick suspended gypsum ceiling board and plaster
on lime soffit
f.Square cut mangrove(boriti) planks alternate with lime infill.
REVISIONS
NO. DATE
LEGEND
DESCRIPTION
floor finish
wall finish
1 2
3 4
ceiling finish
skirting finish
PROJECT:
[01/01]
width
permanent
ventilation
door type
door number
CONSERVATION OF MBARAK
HINAWY STREET, MOMBASA
275
25
275
25
275
STAIRCASE, DRAINGE
CHANNEL & BALCONY
1,525
25
Steel brackets
holding balusters and
painted to mahogany
varnish effect
2.WALL FINISHES.
a.12mm thick lime wash coat on lime plaster, treated with
water proofing
admixture. Coats applied to manufacturers' specifications.
b. Moulded mahogany timber railing above coral stone walling 1000mm from
finished floor level
c. Exposed random cut coral stone
d. 300mm x300mm x20mm thick glazed ceramic tiles 1200mm high with
100mm
straight continuous joints in both directions fixed with adhesive
on rendered
background with grouting to approval.
e.Coral lime plaster finish containing egg white (2 to 3
coats)
f. Emulsion paint.
g. Moulded mahogany timber railing 1200mm high.
3.SKIRTING FINISHES
a. 300mm x100mm thick ceramic tiles.
b. 10mm Lime mortar on 25mm thick lime mortar screed.
c. 150mm high polished in-situ terrazzo
d. ex.150mm x25mm thick Mangrove nailed on wall.
e. 100mm x25mm dressed coral stone tiles
f. Random cut and stacked mazeras stones.
DRAWING TITLE:
50
50
50
1.FLOOR FINISHES.
a. 200mm thick coral aggregate slab to SE's details treated with
hardener/sealer, laid
to falls with a ribbed finish.
b. 6 mm thick polished terrazzo laid on lime mortar screed,50% chops, with
25x3mm dividing strips set off to architects approval.
Total floor slab thickness=200mm.
c. 400mm x200 mm x30mm granito tiles on 1:4 mortar mix, laid on lime
mortar
screed.
Total floor slab thickness=200mm.
d. 300x300 x10mm thick glazed ceramic tiles
e. Approved 200*65*20mm mahogany parquet flooring in
approved pattern laid
with adhesive on 20mm 1:4 lime sand screed.
f. 20mm thick random cut mazeras stone on lime mortar screed
g.40mm screed smooth finish.
OLD TOWN.
25
900
25 150 50
660
25 150 50
660
SCALE 1:10
200
200
200
STAIRCASE SECTION
ex . 75mm thick
varnished mahogany
railing screwed to
steel brackets
STRUCTURAL WORKS.
1. Depth of foundation to be determined on site to S.E's approval.
2. For all Coral aggregate reinforcement works refer to Structural Engineers details.
3. All adjascent Coral aggregate reinforcement works and masonry walls to be tied
with strap wrought iron at every course.
4. All walls less than 200mm thick to be reinforced with hoop wrought iron at every
alternate course.
MECHANICAL.
1.All plumbing and drainage to comply with LamuCountyCouncil
specifications.
2.All service ducts to be accesible fromall floors.
3. SVP denotes soil vent pipe to be provided at at the head of drainage
4. Drains passing beneath buildings and walkways to be encased in 150mm
concrete surround.
5. All underground foul and waste drain pipes to be class 41 golden brown pvc pipe
6. Minimum slope in the drain to be 1%
7.All mechanical work must be coordinated with electrical and any
conflictsbe
clarified before work begins.
reinforced coral rag and lime staircases, of 175 mm high risers &
2,000
CIVIL WORKS.
1. All slabs at ground level to be poured over 1000 gauge polythene sheeting on
50-75mm coral screed on 50-100mm hardcore(coral rag base).
2. All soils under slab to be treated for termite control.
3. All soils on cut embarkments to be stabilised. The slope should not exceed
natural angle of repose.
FINISHES SCHEDULE.
50 100 50
1,804
50 100 50
30
120
255
399
50
1,239
2,200
318
50 100 50
51 43
50 100 50
1,800
300
900
30
961
25
275
25
275
25
DETAILS
SCALE:
1:100, 1:20
DATE:
DRAWING BY:
DRAWING NATURE:
WORKING DRAWING
PAPER SIZE:
A1
SHEET NO.