Professional Documents
Culture Documents
Valve Cover LH
Material
Item
Silicone Gasket and Sealant
F7AZ-19954-EA or equivalent
Specification
WSE-M4G323-A4
Raise and support the vehicle. For additional information, refer to Section 100-02.
2.
Disconnect the oil pressure sensor electrical connector, the power steering pressure sensor electrical connector and the harness position retainer.
3.
4.
Disconnect the cylinder head temperature (CHT) sensor jumper wire connector.
5.
Remove the bolt and the two studs and position the bracket out of the way.
6.
7.
Remove the air cleaner outlet tube. For additional information, refer to Section 303-12.
8.
Disconnect the fuel charging wiring electrical connectors from the coils and the fuel injectors.
9.
10.
Remove the wiper and cowl. For additional information, refer to Section 501-16.
Disconnect the:
42- pin connector.
16-pin connector.
transmission electrical connector.
11.
Remove the six bolts and five studs and remove the valve cover.
12.
13.