Professional Documents
Culture Documents
SLB SH 54 PDF
SLB SH 54 PDF
Imager Tools
The AIT* Array Induction Imager Tools accurately measure open borehole formation conductivity as a function of both well depth and
radius into the formation at different borehole
conditions and environments. Various tools
cater to special operating environments,
including slim wells and hostile, high-pressure,
high-temperature (HPHT) environments.
Wireline array induction tools use an array
induction coil that operates at multiple frequencies. Software focusing of the received
signals generates a series of resistivity logs
with different depths of investigation.
Multichannel signal processing provides
robust, stable tool responses with enhanced
radial and vertical resolution and correction
for environmental effects. Quantitative twodimensional (2D) imaging of formation resistivity is possible because of the large number
of measurements made. The images represent bedding and invasion features clearly
and quantitatively. Advanced invasion
description parameters are used to describe
the presence of transition zones and annuli.
The quantitative information about invasion
can be converted to a 2D image of water saturation Sw, which can be plotted in color at
the wellsite.
SAIT
QAIT
AIT-C
AIT-BA
Applications
Reservoir delineation
Determination of true formation
resistivity Rt
Determination of Sw
Hydrocarbon identification
and imaging
Determination of movable
hydrocarbons
Invasion profiling
Thin-bed analysis
Measurement Specifications
AIT-B and AIT-C
Output
Logging speed
Range of measurement
Vertical resolution
Accuracy
Depth of investigation
AO
SAIT
HIT
QAIT
10-, 20-, 30-, 60-, and 90-in. [25.40-, 50.80-, 76.20-, 152.40-, and 228.60-cm] deep induction resistivities, spontaneous potential (SP), mud resistivity
3,600 ft/hr [1,097 m/h]
0.1 to 2,000 ohm-m
1, 2, and 4 ft [0.30, 0.61, and 1.22 m]
Resistivities: 0.75 ms/m (conductivity) or 2% (whichever is greater)
AO/AT/AF10: 10 in. [25.40 cm]
AO/AT/AF20: 20 in. [50.80 cm]
AO/AT/AF30: 30 in. [76.20 cm]
AO/AT/AF60: 60 in. [152.40 cm]
AO/AT/AF90: 90 in. [228.60 cm]
Salt-saturated muds are usually outside the operating range of induction tools.
Combinable with most services
Platform Express platform
SlimAccess platform
Xtreme platform
SlimXtreme platform
Slim wellbores
High temperature
Slim wellbores
Severe doglegs
H2S service
High pressure
H2S service
and temperature
= 1-ft [0.30-m] vertical resolution, AT = 2-ft [0.61-m] vertical resolution, AF = 4-ft [1.22-m] vertical resolution
Mechanical Specifications
AIT-B and AIT-C
AIT-H
AIT-M
SAIT
HIT
QAIT
Temperature rating
Pressure rating
Borehole sizemin.
Borehole sizemax.
Outer diameter
350F [177C]
20,000 psi [138 MPa]
434 in. [12.07 cm]
20 in. [50.80 cm]
3.875 in. [9.84 cm]
257F [125C]
15,000 psi [103 MPa]
434 in. [12.07 cm]
20 in. [50.80 cm]
3.875 in. [9.84 cm]
302F [150C]
15,000 psi [103 MPa]
434 in. [12.07 cm]
20 in. [50.80 cm]
3.875 in. [9.84 cm]
500F [260C]
25,000 psi [172 MPa]
4 78 in. [12.38 cm]
20 in. [50.80 cm]
3.875 in. [9.84 cm]
500F [260C]
30,000 psi [207 MPa]
3 78 in. [9.84 cm]
20 in. [50.80 cm]
3 in. [7.62 cm]
Length
Weight
Tension
Compression
33.5 ft [10.21 m]
575 lbm [261 kg]
16,500 lbf [73,400 N]
2,300 lbf [10,230 N]
16 ft [4.88 m]
255 lbm [116 kg]
20,000 lbf [88,960 N]
6,000 lbf[26,690 N]
16 ft [4.88 m]
282 lbm [128 kg]
20,000 lbf [88,960 N]
6,000 lbf[26,690 N]
302F [150C]
14,000 psi [97 MPa]
4 in. [10.16 cm]
9 in. [22.86 cm]
2.75 in. [6.99 cm] with
0.25-in. [0.64-cm] standoff
23.6 ft [7.19 m]
238 lbm [108 kg]
20,000 lbf [88,960 N]
3,300 lbf [14,680 N]
29.2 ft [8.90 m]
625 lbm [283 kg]
20,000 lbf [88,960 N]
6,000 lbf [26,690 N]
30.8 ft [9.39 m]
499 lbm [226 kg]
20,000 lbf [88,960 N]
2,000 lbf [8,900 N]
Without
SP sub
www.slb.com/oilfield
FE_04_004_0
Schlumberger
August 2004
*Mark of Schlumberger