You are on page 1of 3

Name : Bintang Andy Nugroho

No
: 10
Kelas : A
Chapter 4. Describing Data Effectively: Results,
Discussion, and Conclusion Sections
Opening
The combination of experimental
findings with model ling and
simulation has produced a sound
basis for the design and development
of control systems for fluidized bed
drying of tea
Slogger, a custom built electronic
data logging, display
and control system with serial
communication has become an important part of the
management system in
African tea factories
The model has already yielded some
useful outputs from a sensitivity
analysis that produced Fig. 9
amongst other results. The figure
gives an insight into a tea dryer
design problem where a
compromise must be found
between a limited residence time
(values too high will result in product
quality degradation), the desired
moisture content and the feed-rate

A. REVIEW

B. BACKGROUND

C. RESULT WITH
REFERENCE

(as high as possible).

It has been installed in the majority


of factories in Malawi.
Because of its simplicity, maintenance is easy and unhindered by long
delivery lines from
suppliers.
Moreover, simulations with the
model allowed an exploration of
alternative control methods that
result in a significantly lower
standard deviation of the moisture
content
In these new control methods,
inferential control and delay time

D. Outcome that
expected
E. EXPLANATION

I.

RECOMENDATION

J. FUTURE WORK

compesators were of major


importance.

You might also like