Professional Documents
Culture Documents
Heat and Mass Transfer: Fundamentals & Applications: Errata Sheet
Heat and Mass Transfer: Fundamentals & Applications: Errata Sheet
Errata Sheet
Last Update: September 2013
Conversion Factors (Inside Front Cover)
Thermal resistance: Change 1 K/W = 0.52750 F/hBtu to 1 K/W = 0.52750 Fh/Btu
Chapter 1
p. 9, 6th line after the subtitle: Change denoted by W to denoted by W
p. 11, 4th line: Change qavg to qavg
p. 13, the term
on the right of Eq. (1-17) should be even with the equal sign
1 T
1 T T
k
to 2
k
"
2
r
r
p. 100, Eq. 2-66: Vee should be volume vee V
1
m to L = 5/m
5
p. 197, Prob. 3-20, Answers: Change Answers to 154 W, 16.7C
p. 200, Prob. 3-37, 7th line: Change 28C to 24C. Do the same in the figure. [This is needed
to avoid negative value for the insulation thickness]
p. 208, Prob. 3-112: Delete Fig. P3-112
p. 211, Prob. 3-131: Place a computer-EES icon
to this problem.
p. 211, Prob. 3-135, Answer: Change 555 W to 492 W
p. 221, Prob. 3-216, Last line: Change (d) 3.4 cm to 3.3 cm
Chapter 4
p. 231, Example 4-2: Replace the calculations with the followings. Only change the changed
values
Lc
(D 2 / 4) L D 0.050 m
V
0.0125 m
4
4
DL
As
Bi
0.088 0.1
63.9 W/m K
k
hAs
h
450 W/m 2 K
0.01059 s -1
3
c pV c p Lc (7832 kg/m )(434 J/kg K )(0.0125 m)
T (t ) T
e bt
Ti T
1 T (t ) T
1
95 40
ln
ln
254 s
-1
b Ti T
0.01059 s
850 40
p. 237, Table 4-1, last column for Plane wall: Change ln tan ln 5 Bi to n tan n = Bi
p. 239, Table 4-3, the last four Bessel function values in the last column should be positive, as
shown below:
2.6
0.0968 0.4708
2
2.8
3.0
3.2
0.1850 0.4097
0.2601 0.3391
0.3202 0.2613
p. 358, Prob. 5-55, last line: Change to Answers: (b) T1 = T4 = 93C, T2 = T3 = 86C
p. 359, Prob. 5-60: Change the problem statement to: 5-60
(or other) software.
p. 369, Prob. 5-136, 17th line: Change 28C to 20C. Do the same in the problem figure. Also,
3rd line from last: Change t=4s to t=5s
p. 369, Prob. 5-137, 2nd line: Change 3 s to 5 s
Chapter 6
p. 385, Eq. 6-13: Change Viscous to Viscous forces
p. 409, Figure P6-10: Change bottom plate label from Ts,1 to Ts,2
p. 410, Prob. 6-28: 5th line: Change A and B to C1 and C2
3
D
p. 492, Eq. 8-78: Change from Fo 0.86 i
Do
0.16
0.6
D
to Fo 1 0.14 i
Do
p. 499, Figure 8-35 (the 3rd figure to the right) in the legend: Change 3 kW/m2 to 16 kW/m2
pp.501-506, The background color for Special Topic section disappears in these pages. Use a
consistent background color in the entire Special Topic section
p. 505, Reference 5, last line: Delete , after No. 8
p. 511, Prob. 8-48, Answers: Change 584 to 582
p. 513, Prob. 8-78: Change problem number to 8-78E
p. 516, Prob. 8-99, 4th line: Delete at after enters
p. 516, Prob. 8-103: Change problem number to 8-103E
Chapter 9
p. 527, 1st line below Eq. 9-16: Change ReL to RaL
p. 541, Eq. 9-55: Change 0.46 to 0.046
p. 550, 13th line from top of the page: Change transfort to transport
p. 552, section heading: Change SCPECIAL to SPECIAL
p. 563, 9th line of the right hand side column: Change For vertical horizontal to For vertical
rectangular
p. 565, Prob. 9-13: Change problem number to 9-13E
p. 567, Prob. 9-37, 8th line: Change the transfer to the heat transfer
p. 568, Prob. 9-39, the line before last: Change 10-h to 15-h
p. 571, 1st line of Problem 9-70: Change radii to diameters
p. 572, Prob. 9-78: Insert a laptop-EES icon to this problem like that in Prob. 9-75.
p. 573, Prob. 9-86, Answer: Change 11.9 to 9.90
p. 575, Prob. 9-112, Answers: Change 1764 to 1762
p. 578, 1st line of Problem 9-131: Change radii to diameters
p. 579, Prob. 9-137, First line: Change 0.5-m-high to 0.9-m-high
Chapter 10
p. 589, Table 10-1, 2nd column (halfway down): Change 0,0377 to 0.0377
p. 597, Figure 10-19 (top of the left hand side figure): Change Low to High and High to
Low
p. 599, 4th line after Eq. 10-8: Change Ac = p to Ac = p
p. 600, 6th line from the bottom of the page: Change 450< Re < 1800 to 30< Re < 1800
p. 601, 3rd line above Eq. 10-12: Change in the numerator of the equation ( y) to ( y)
p. 603, 3rd line above Eq. 10-22: Change Eq. 10-9 to Eq. 10-9a
p. 606, 1st line: Delete is higher
p. 611, 5th line from top of the page: Change Rohsenow to Rohsenow (1973)
p. 611, Eq. 10-36: Change 22C < Tsat, 100C to 22C < Tsat < 100C
p. 611, Eq. 10-37: Change 255,310 to 255,510
p. 613, Caption for Figure 10-37: Delete upward from the figure caption
p. 613, 6th line below Eq. 10-38: Change l to I
p. 613, 4th line below Eq. 10-38 in the expression for Rel: Change 1 to l
p. 613, 7th line below Eq. 10-38 in the denominator of equation for Fp, the closing parenthesis
after g is missing: change the denominator to gD(l - g)
p. 615, 1st calculation: Leave a space before the second kg/s
p. 617, 15th line of the right hand side column, in the denominator of equation for hvert: change
(Ts - Tsat) to (Tsat - Ts)
p. 617, last line of the right hand side column, in the denominator of equation for hhoriz: change
(Ts - Tsat) to (Tsat - Ts)
p. 618, Equation for hinternal: In the denominator, insert a D into the denominator in the brackets
after (Tsat - Ts)
p. 621, Prob. 10-38, Answers: Change 1609 to 1610 and Change 0.761 to 0.762
p. 621, Prob. 10-39: Change 160C to 155C
p. 623, Prob. 10-69, Answer: Change 12.8 to 12.9
p. 625, Prob. 10-98, Answers: Change 3345 to 8413 and 0.0242 to 0.0608
Chapter 11
p. 654, 2nd equation below Eq. 11-33 for if Ch = Cmin: Change
Th , out Th , out
Th , in Tc , in
to
Th , in Th , out
Th , in Tc , in
Chapter 12
p. 691, Example 12-1, the denominator of the last equation: Change 1.43878 104 mK to
1.43878 104 mK
p. 696, Eq. 12-15: Change the color of black integrals to orange
to
p. 770, 3rd line: Change (Figs. 12-36 and 12-37) to (Figs. 13-36 and 13-37)
p. 781, Prob. 13-21: Change L = D to L = D
p. 781, Prob. 13-28: Replace problem statement with A solid sphere of 1 m diameter at 600 K is
kept in an evacuated equilateral triangular enclosure (a tetrahedron) whose side length is L.
Note that for the sphere to touch the tetrahedrons surfaces, the tetrahedrons side length should
be L D 6 . The emissivity of the sphere is 0.45 and the temperature of the enclosure is 420 K.
If heat is generated uniformly within the sphere at a rate of 3100 W, determine (a) the view factor
from the enclosure to the sphere and (b) the emissivity of the enclosure.
p. 781, Figure P13-28: Change 2 m to L (3 times)
p. 784, Prob. 13-58, last line: Change determined to determine.
p. 785, Prob. 13-58: Delete the answer.
p. 786, Prob. 13-73, 1st line: Change 0.20 to 0.10 (This is needed because shield has a
diameter of 0.20 m)
p. 790, Prob. 13-110, Answers: Change 5.2 to 12.7
p. 790, Prob. 13-111, Answer: Change 1066 to 1058
Chapter 14
p. 802, Eq. 14-13 for Mass basis: Change
drA
d
to A
dx
dx
to
6
to
p. 818, Table 14-11, 4th line (both columns). Change to and mass to mass.
p. 822, 7th line before Eq. 14-40: Change molecularmass to molecular mass
p. 822, 6th line before Eq. 14-40: Change themass to the mass
p. 826, Eq. 14-60, 1st term on the right side. Change:
D PA
D AB P
to AB
L Ru T
L Ru T
wA
y
C A
y
wA
y
wA
y
p. 838, Table 14-13, first two lines of the second column. Change: Sc > 0.5 to Sc > 0.6 (two
places).
p. 848, 2nd Column, 4th line: Change Le = 1 to Le2/3 1
p. 849, Prob. 14-14, Answer: Change 0.144 to 0.143
p. 849, Prob. 14-16E, Answer: Change 1.7 percent to 1.6 percent
p. 852, Prob. 14-50, Answer: Change 2.871015 kg/s to 1.151014 kg/s
p. 854, Prob. 14-71, Answer: Change 0.00011 mm to 0.0011 mm.
p. 856, Prob. 14-95, Answer: Change 2827 days to 1702 days
p. 859, 5th line of Problem 14-136. Change: water has uniform temperature to water has
a uniform temperature .
p. 861, Prob. 14-157E, Answers: Switch the answers for parts (a) and (b).