Professional Documents
Culture Documents
02
Date
2013-11-15
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 02 (2013-11-15)
WCDMA RAN
Cell Barring Feature Parameter Description
Contents
Contents
1 Introduction....................................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
1.4 Differences Between Base Station Types.......................................................................................................................2
2 Overview.........................................................................................................................................4
3 Automatic Operation....................................................................................................................5
4 Manual operation..........................................................................................................................8
5 Engineering Guidelines.............................................................................................................11
5.1 When to Use.................................................................................................................................................................11
5.2 Deployment..................................................................................................................................................................11
5.2.1 Requirements.............................................................................................................................................................11
5.2.2 Data Preparation........................................................................................................................................................11
5.2.3 Activation..................................................................................................................................................................11
5.2.4 Activation Check.......................................................................................................................................................14
5.2.5 Deactivation...............................................................................................................................................................17
6 Parameters.....................................................................................................................................20
7 Counters........................................................................................................................................46
8 Glossary.........................................................................................................................................47
9 Reference Documents.................................................................................................................48
Issue 02 (2013-11-15)
ii
WCDMA RAN
Cell Barring Feature Parameter Description
1 Introduction
Introduction
1.1 Scope
This document describes WRFD-021102 Cell Barring, including the basic concepts related to
channel element (CE) resources and basic methods of managing and controlling CE resources.
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
RAN15.0 02 (2013-11-15)
This issue includes the following changes.
Issue 02 (2013-11-15)
Change Type
Change Description
Parameter Change
Feature change
None.
None.
WCDMA RAN
Cell Barring Feature Parameter Description
1 Introduction
Change Type
Change Description
Parameter Change
Editorial change
None.
RAN15.0 01(2013-04-28)
This issue does not include any changes.
Change Description
Parameter Change
Feature change
None.
None.
Editorial change
None.
Model
Macro
Micro
l BTS3803E
l BTS3902E
LampSite
Issue 02 (2013-11-15)
DBS3900
WCDMA RAN
Cell Barring Feature Parameter Description
1 Introduction
The features described in this document are implemented in the same way on macro, micro, and
LampSite base stations.
Issue 02 (2013-11-15)
WCDMA RAN
Cell Barring Feature Parameter Description
2 Overview
Overview
When the Iu interface is disconnected, this feature can prevent the UE from initiating useless
access requests and ensure that 3G UEs are handed over to the 2G network.
This feature can provide flexibility for the operator in some scenarios (for example,
maintenance).
Manual operation. The operator can bar/unbar the cell by the MML commands. And then
RNC will update the system information of this cell to indicate UE the change;
Automatic operation. In cases of Iu-CS or Iu-PS breakdown, the RNC keeps providing
coverage (but not service) to the UEs under its control. This means that several UEs are
kept in 3G coverage, but, actually, they cannot access the network. If the Iu-CS breaks
down, the RNC will bar the CS domain service for the cell; if the Iu-PS breaks down, the
RNC will bar the PS domain service for the cell. In the case of both Iu-CS and Iu-PS
breakdown, RNC bars the cell automatically.
The RAN notifies the UE through SIB about the information of cell barring. And the UE detects
SIB and access the network according to the SIB.
l
If SIB1 does not contain the information of one CN domain (CS or PS), the UE does not
initiate services in this domain and does not reselect cells but camps in the current cell.
If the SIB3/4 indicates the cell is barred, the UE is not permitted to select/re-select this cell,
not even for emergency calls. UE firstly tries to camp on configured 3G/2G neighboring
cells. If all cells cannot be camped on, the UE tries to search new network.
Issue 02 (2013-11-15)
WCDMA RAN
Cell Barring Feature Parameter Description
3 Automatic Operation
Automatic Operation
If
Issue 02 (2013-11-15)
SYS_INFO_UPD
ATE_FOR_IU_R
ST Switch Under
the RNC-level
PROCESSSWIT
CH
(BSC6900,
BSC6910)
Parameter
SYS_INFO_UP
DATE_FOR_I
U_RST Switch
Under the Celllevel
NBMCacAlgoS
witch
(BSC6900,
BSC6910)
Parameter
BARRED_CELL
_FOR_CSDOMA
IN_RST Switch
Under the
PROCESSSWIT
CH
(BSC6900,
BSC6910)
Parameter
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
WCDMA RAN
Cell Barring Feature Parameter Description
3 Automatic Operation
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
NOTE
When the signaling links of both Iu-CS and Iu-PS break up:
If
Issue 02 (2013-11-15)
Then
WCDMA RAN
Cell Barring Feature Parameter Description
3 Automatic Operation
SYS_INFO_UPD
ATE_FOR_IU_R
ST Switch Under
the RNC-level
PROCESSSWIT
CH
(BSC6900,
BSC6910)
Parameter
SYS_INFO_UPDA
TE_FOR_IU_RST
Switch Under the
Cell-level
NBMCacAlgoSwitc
h
(BSC6900,
BSC6910)
Parameter
ON
ON
ON
OFF
Issue 02 (2013-11-15)
WCDMA RAN
Cell Barring Feature Parameter Description
4 Manual operation
Manual operation
Quick blocking/unblocking of cells is required in some special scenarios. For example, if the
RNC is faulty when the UE camps on the 3G network, the RNC cannot provide complete services
on the access network; if the CN needs to be upgraded, the UE must be forcibly handed over
from the 3G network to the 2G network. Although the BLK ULOCELL command can be
executed to block/unblock cells in batches, this method requires longer preparation and
processing time. Therefore, it does not meet the requirement for quickly blocking/unblocking
cells.
Quick blocking/unblocking of cells is a process of UE access control through the AC control
IEs in the cell system information. It is effective for the UEs in idle mode. The blocking modes
are as follows:
l
Blocking all the cells controlled by an RNC through the ADD URNCALLCELLBLK
command. Cell blocking can be performed in the PS domain or in both the PS domain and
the CS domain, which is set by the DomainType(BSC6900,BSC6910) parameter. The
processing time of cell blocking is set by the ProcessDuration(BSC6900,BSC6910)
parameter.
l Only one blocking mode can be used for quick blocking/unblocking of cells, that is, the blocking modes
based on RNC and Operator cannot be used simultaneously.
l In the latter blocking mode, the ADD UCNOPALLCELLBLK command is executed for only one
operator.
Cell blocking can be performed in the PS domain or in both the PS domain and the CS domain,
which is set by the DomainType(BSC6900,BSC6910) parameter. The processing time of cell
blocking is set by the ProcessDuration(BSC6900,BSC6910) parameter.
Table 4-1 provides five schemes for quickly blocking/unblocking cells.
Issue 02 (2013-11-15)
WCDMA RAN
Cell Barring Feature Parameter Description
4 Manual operation
Blocked Domain
Scheme
UE Version
Compatibility
RNC
PS domain
Delete the
information about
the PS domain from
SIB1. Only the
information about
the CS domain is
broadcast.
RNC
CS domain and PS
domain
Issue 02 (2013-11-15)
PS domain
WCDMA RAN
Cell Barring Feature Parameter Description
Issue 02 (2013-11-15)
4 Manual operation
Target Object
Blocked Domain
Scheme
UE Version
Compatibility
Operator
CS domain and PS
domain
CELL
PS domain
Delete the
information about
the PS domain from
SIB1. Only the
information about
the CS domain is
broadcast.
10
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
Engineering Guidelines
5.2 Deployment
5.2.1 Requirements
None
5.2.3 Activation
Using MML Commands
Automatic Cell Barring
To enable the function of the automatic cell barring, run the following command:
Step 1 Run the RNC MML command SET URRCTRLSWITCH. In this step, select
SYS_INFO_UPDATE_FOR_IU_RST and BARRED_CELL_FOR_CSDOMAIN_RST
from the Process switch drop-down list.
Issue 02 (2013-11-15)
11
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
12
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
Step 1 Run the RNC MML command RMV URNCALLCELLBLK to unblock all the cells in the
RNC
----End
= SYS_INFO_UPDATE_FOR_IU_RST-1;
= BARRED_CELL_FOR_CSDOMAIN_RST-1;
NBMCacAlgoSwitch=SYS_INFO_UPDATE_FOR_IU_RST-1;
CNId=0, StateIndTmr=20000;
When configuring the UMTS-to-LTE Fast Return feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
Issue 02 (2013-11-15)
SN
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
URRCTRLS
WITCH
RNC
Process
switch(turn
on the
SYS_INFO
_UPDATE_
FOR_IU_R
ST and
BARRED_
CELL_FO
R_CSDOM
AIN_RST
switches)
PROCESSS
WITCH
(BSC6900,
BSC6910)
Yes
13
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
SN
MO
NE
Parameter
Name
Parameter
ID
UCELLAL
GOSWITC
H
RNC
Cell CAC
algorithm
switch (turn
on the
SYS_INFO
_UPDATE_
FOR_IU_R
ST switch)
NBMCacAl
goSwitch
(BSC6900,
BSC6910)
UIUTIMER
ANDNUM
RNC
CN
protection
timer
StateIndTm
r
(BSC6900,
BSC6910)
Configura
ble in CME
Batch
Modificati
on Center
Yes
Perform the same verification procedure when blocking the CS domain or the CS domain is disconnected.
Step 1 Click to display Uu Interface Trace on the RNC LMT. Under Uu Message Type, select
RRC_SYS_INFO_TYPE1.
Step 2 View whether information element (IE) information of the PS domain is contained in the traced
messages. Expected result: PS domain IE information is not contained, as shown in Figure
5-1.
----End
Issue 02 (2013-11-15)
14
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
Block CS and PS domains, CS and PS domains are disconnected, or block the CS domain and
turn on BARRED_CELL_FOR_CSDOMAIN_RST. Perform the following steps to verify
whether this feature is activated:
Step 1 Click to display Uu Interface Trace on the RNC LMT. Under Uu Message Type, select
RRC_SYS_INFO_TYPE3.
Step 2 View whether IE information related to CS and PS domains is contained in the traced messages.
Expected result: The IE information is not contained, as shown in Figure 5-2.
----End
Issue 02 (2013-11-15)
15
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
Bar PS services of UEs served by an operator. Perform the following steps to verify whether
this feature is activated:
NOTE
Perform the same verification procedure when barring CS services of UEs served by an operator.
Step 1 Click to display Uu Interface Trace on the RNC LMT. Under Uu Message Type, select
RRC_SYS_INFO_TYPE3.
Step 2 View whether IE information related to CS and PS domains is contained in the traced messages.
Expected result: The IE information is not contained, as shown in Figure 5-3.
----End
Issue 02 (2013-11-15)
16
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
5.2.5 Deactivation
Using MML Commands
Deactivating automatic cell barring
Step 1 Run the RNC MML command SET URRCTRLSWITCH. In this step, deselect
SYS_INFO_UPDATE_FOR_IU_RST and BARRED_CELL_FOR_CSDOMAIN_RST
from the Process switch drop-down list.
Step 2 Run the RNC MML command ADD UCELLALGOSWITCH or MOD
UCELLALGOSWITCH. In this step, deselect SYS_INFO_UPDATE_FOR_IU_RST from
the Cell CAC algorithm switch drop-down list.
----End
17
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
Step 2 Run the RNC MML command RMV UCNOPALLCELLBLK to remove parameters related
to operator-specific barring of all cells in a network.
----End
NOTE
The duration of cell unblocking is specified by the ProcessDuration parameter in the ADD
URNCALLCELLBLK or ADD UCNOPALLCELLBLK command and the RNC unblocks all cells one
by one within this duration.
When configuring the UMTS-to-LTE Fast Return feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
Issue 02 (2013-11-15)
18
WCDMA RAN
Cell Barring Feature Parameter Description
5 Engineering Guidelines
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
URRCTRLS
WITCH
RNC
Process
switch (turn
off the
SYS_INFO
_UPDATE_
FOR_IU_R
ST and
BARRED_
CELL_FO
R_CSDOM
AIN_RST
switches)
PROCESSS
WITCH
(BSC6900,
BSC6910)
Yes
UCELLAL
GOSWITC
H
RNC
Cell CAC
algorithm
switch (turn
off the
SYS_INFO
_UPDATE_
FOR_IU_R
ST switch)
NBMCacAl
goSwitch
(BSC6900,
BSC6910)
Yes
Issue 02 (2013-11-15)
19
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parameters
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
StateInd
Tmr
BSC690
0
SET
UIUTI
MERA
NDNU
M
WRFD010101
3GPP
R9
Specific
ations
Cell
Barring
WRFD021102
Unit: ms
Actual Value Range: 1000~300000
Default Value: 20000
StateInd
Tmr
BSC691
0
SET
UIUTI
MERA
NDNU
M
WRFD010101
WRFD021102
3GPP
R9
Specific
ations
Cell
Barring
Issue 02 (2013-11-15)
20
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
PROCE
SSSWIT
CH
BSC690
0
SET
URRCT
RLSWI
TCH
WRFD021102
Cell
Barring
WRFD150205
Layered
Paging
in Idle
Mode
WRFD150204
WRFD010101
WRFD150231
WRFD020500
WRFD021303
WRFD020132
WRFD020124
WRFD140206
WRFD020134
WRFD020128
WRFD0106121
2
WRFD010641
WRFD020806
Platinu
m User
Prioritizi
ng
3GPP
R9
Specific
ations
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Enhance
d Fast
Dorman
cy
IMSI
Based
Handov
er
Web
browsin
g
accelerat
ion
Uplink
Flow
Control
of User
Plane
Layered
Paging
in
Issue 02 (2013-11-15)
21
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
URA_P
CH
Push to
Talk
Quality
Improve
ment for
Subscrib
ed
Service
HSUPA
Iub Flow
Control
in Case
of Iub
Congesti
on
HSUPA
Adaptiv
e
Transmi
ssion
Differen
tiated
Service
Based
on SPI
Weight
Issue 02 (2013-11-15)
22
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
23
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
24
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
25
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
26
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
SYS_HO_CIPHER_CONFIG,
BARRED_CELL_FOR_CSDOMAIN_RST,
CR2284R1_SWITCH, CDT_MSG_FULL_TRACE,
CR2284R1_COMPATIBLE_SWITCH,
COMBINE_OPERATION_DRD_SWITCH,
UL_INTER_PROTECT_SWITCH,
FAST_DORMANCY_SWITCH,
SYS_HO_IN_CIPHER_SWITCH,
PTT_EARLY_TRANS_SWITCH_OFF,
UPLINK_MDC_ENHENCEMENT_SWITCH,
NODEB_PRIVATE_INTERFACE_SWITCH,
PTT_SPEC_LI_SWITCH_OFF,
RNC_DF_2_URA_PCH_SWITCH,
FD_TAC_MATCH_SWITCH,
NONPTT_L1_FAST_SYNC_SWITCH,
URAPCH_LAYERED_PAGING_RT_SWITCH,
URAPCH_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTION,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Default Value: INVOKE_TRACE_SWITCH:
0,SYS_INFO_UPDATE_FOR_IU_RST:
0,DRNC_DIRECT_DSCR:
0,PTUSER_IDENTIFY_ENH_SWITCH:
0,RNC_SHARE_SWITCH:
1,RNCAP_IMSI_HO_SWITCH:
0,TERMINAL_VERSION_DEBASE_SWITCH:
0,SYS_HO_OUT_CIPHER_SWITCH:
0,SYS_HO_CIPHER_CONFIG:
1,BARRED_CELL_FOR_CSDOMAIN_RST:
0,CR2284R1_SWITCH:
0,CDT_MSG_FULL_TRACE:
0,CR2284R1_COMPATIBLE_SWITCH:
1,COMBINE_OPERATION_DRD_SWITCH:
1,UL_INTER_PROTECT_SWITCH:
0,FAST_DORMANCY_SWITCH:
0,SYS_HO_IN_CIPHER_SWITCH:
0,PTT_EARLY_TRANS_SWITCH_OFF:
0,UPLINK_MDC_ENHENCEMENT_SWITCH:
0,NODEB_PRIVATE_INTERFACE_SWITCH:
0,PTT_SPEC_LI_SWITCH_OFF:
0,RNC_DF_2_URA_PCH_SWITCH:
0,FD_TAC_MATCH_SWITCH:
Issue 02 (2013-11-15)
27
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
0,NONPTT_L1_FAST_SYNC_SWITCH:
0,URAPCH_LAYERED_PAGING_RT_SWITCH:
0,URAPCH_LAYERED_PAGING_NRT_SWITCH:
0,IDLE_LAYERED_PAGING_NRT_SWITCH:
0,IDLE_LAYERED_PAGING_RT_SWITCH:
0,INTELLIGENT_WIFI_DETECT_AND_SELECTION:
0,INTERRAT_LOAD_REPORT_FOR_LTE_SWITC
H:0,PTUSER_IDENTIFY_SWITCH:0
Issue 02 (2013-11-15)
28
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
PROCE
SSSWIT
CH
BSC691
0
SET
URRCT
RLSWI
TCH
WRFD021102
Cell
Barring
WRFD150205
Layered
Paging
in Idle
Mode
WRFD150204
WRFD010101
WRFD150231
WRFD020500
WRFD021303
WRFD020132
WRFD020124
WRFD140206
WRFD020134
WRFD020128
WRFD0106121
2
WRFD010641
WRFD020806
Platinu
m User
Prioritizi
ng
3GPP
R9
Specific
ations
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Enhance
d Fast
Dorman
cy
IMSI
Based
Handov
er
Web
browsin
g
accelerat
ion
Uplink
Flow
Control
of User
Plane
Layered
Paging
in
Issue 02 (2013-11-15)
29
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
URA_P
CH
Push to
Talk
Quality
Improve
ment for
Subscrib
ed
Service
HSUPA
Iub Flow
Control
in Case
of Iub
Congesti
on
HSUPA
Adaptiv
e
Transmi
ssion
Differen
tiated
Service
Based
on SPI
Weight
Issue 02 (2013-11-15)
30
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
31
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
32
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
33
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
34
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
SYS_HO_CIPHER_CONFIG,
BARRED_CELL_FOR_CSDOMAIN_RST,
CR2284R1_SWITCH, CDT_MSG_FULL_TRACE,
CR2284R1_COMPATIBLE_SWITCH,
COMBINE_OPERATION_DRD_SWITCH,
UL_INTER_PROTECT_SWITCH,
FAST_DORMANCY_SWITCH,
SYS_HO_IN_CIPHER_SWITCH,
PTT_EARLY_TRANS_SWITCH_OFF,
UPLINK_MDC_ENHENCEMENT_SWITCH,
NODEB_PRIVATE_INTERFACE_SWITCH,
PTT_SPEC_LI_SWITCH_OFF,
RNC_DF_2_URA_PCH_SWITCH,
FD_TAC_MATCH_SWITCH,
NONPTT_L1_FAST_SYNC_SWITCH,
URAPCH_LAYERED_PAGING_RT_SWITCH,
URAPCH_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTION,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Default Value: INVOKE_TRACE_SWITCH:
0,SYS_INFO_UPDATE_FOR_IU_RST:
0,DRNC_DIRECT_DSCR:
0,PTUSER_IDENTIFY_ENH_SWITCH:
0,RNC_SHARE_SWITCH:
1,RNCAP_IMSI_HO_SWITCH:
0,TERMINAL_VERSION_DEBASE_SWITCH:
0,SYS_HO_OUT_CIPHER_SWITCH:
0,SYS_HO_CIPHER_CONFIG:
1,BARRED_CELL_FOR_CSDOMAIN_RST:
0,CR2284R1_SWITCH:
0,CDT_MSG_FULL_TRACE:
0,CR2284R1_COMPATIBLE_SWITCH:
1,COMBINE_OPERATION_DRD_SWITCH:
1,UL_INTER_PROTECT_SWITCH:
0,FAST_DORMANCY_SWITCH:
0,SYS_HO_IN_CIPHER_SWITCH:
0,PTT_EARLY_TRANS_SWITCH_OFF:
0,UPLINK_MDC_ENHENCEMENT_SWITCH:
0,NODEB_PRIVATE_INTERFACE_SWITCH:
0,PTT_SPEC_LI_SWITCH_OFF:
0,RNC_DF_2_URA_PCH_SWITCH:
0,FD_TAC_MATCH_SWITCH:
Issue 02 (2013-11-15)
35
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
0,NONPTT_L1_FAST_SYNC_SWITCH:
0,URAPCH_LAYERED_PAGING_RT_SWITCH:
0,URAPCH_LAYERED_PAGING_NRT_SWITCH:
0,IDLE_LAYERED_PAGING_NRT_SWITCH:
0,IDLE_LAYERED_PAGING_RT_SWITCH:
0,INTELLIGENT_WIFI_DETECT_AND_SELECTION:
0,INTERRAT_LOAD_REPORT_FOR_LTE_SWITC
H:0,PTUSER_IDENTIFY_SWITCH:0
Issue 02 (2013-11-15)
36
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
NBMCa
cAlgoS
witch
BSC690
0
ADD
UCELL
ALGOS
WITCH
WRFD010654
WRFD021102
128
HSDPA
Users
per Cell
MOD
UCELL
ALGOS
WITCH
WRFD021104
Cell
Barring
WRFD010653
Emerge
ncy Call
WRFD020102
96
HSDPA
Users
per Cell
WRFD140223
WRFD020101
WRFD020122
WRFD010202
WRFD020117
WRFD020136
WRFD0106121
1
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
Admissi
on
Control
MultiCarrier
Switch
off
Based
on QoS
UE State
in
Connect
ed Mode
(CELLDCH,
CELLPCH,
URAPCH,
CELLFACH)
MultiCarrier
Issue 02 (2013-11-15)
37
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
Switch
off
Based
on
Traffic
Load
AntiInterfere
nce
Scheduli
ng for
HSUPA
20
HSUPA
Users
per Cell
Issue 02 (2013-11-15)
38
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
Issue 02 (2013-11-15)
39
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
NBMCa
cAlgoS
witch
BSC691
0
ADD
UCELL
ALGOS
WITCH
WRFD010654
WRFD021102
128
HSDPA
Users
per Cell
MOD
UCELL
ALGOS
WITCH
WRFD021104
Cell
Barring
WRFD010653
Emerge
ncy Call
WRFD020102
96
HSDPA
Users
per Cell
WRFD140223
WRFD020101
WRFD020122
WRFD010202
WRFD020117
WRFD020136
WRFD0106121
1
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
Admissi
on
Control
MultiCarrier
Switch
off
Based
on QoS
UE State
in
Connect
ed Mode
(CELLDCH,
CELLPCH,
URAPCH,
CELLFACH)
MultiCarrier
Issue 02 (2013-11-15)
40
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
Switch
off
Based
on
Traffic
Load
AntiInterfere
nce
Scheduli
ng for
HSUPA
20
HSUPA
Users
per Cell
Issue 02 (2013-11-15)
41
WCDMA RAN
Cell Barring Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
6 Parameters
Feature
Name
Description
Issue 02 (2013-11-15)
42
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
IuAcInte
rvalOfC
ell
BSC690
0
SET
UACAL
GO
WRFD021102
Cell
Barring
IuAcInte
rvalOfC
ell
BSC691
0
SET
UACAL
GO
WRFD021102
Cell
Barring
Domain
Type
BSC690
0
ADD
URNCA
LLCEL
LBLK
WRFD021102
Cell
Barring
MOD
URNCA
LLCEL
LBLK
Domain
Type
BSC691
0
ADD
URNCA
LLCEL
LBLK
MOD
URNCA
LLCEL
LBLK
Issue 02 (2013-11-15)
Unit: None
Actual Value Range: PsBlk, CsAndPsBlk
Default Value: None
WRFD021102
Cell
Barring
43
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
Process
Duration
BSC690
0
ADD
URNCA
LLCEL
LBLK
WRFD021102
Cell
Barring
MOD
URNCA
LLCEL
LBLK
Process
Duration
BSC691
0
ADD
URNCA
LLCEL
LBLK
Unit: min
Actual Value Range: 2~30
Default Value: None
WRFD021102
Cell
Barring
MOD
URNCA
LLCEL
LBLK
Domain
Type
BSC690
0
ADD
UCELL
ACCES
SSTRIC
T
Unit: min
Actual Value Range: 2~30
Default Value: None
WRFD021102
Cell
Barring
BSC691
0
ADD
UCELL
ACCES
SSTRIC
T
MOD
UCELL
ACCES
SSTRIC
T
Issue 02 (2013-11-15)
MOD
UCELL
ACCES
SSTRIC
T
Domain
Type
WRFD021102
Cell
Barring
44
WCDMA RAN
Cell Barring Feature Parameter Description
6 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
Process
Duration
BSC690
0
ADD
UCNOP
ALLCE
LLBLK
WRFD021102
Cell
Barring
MOD
UCNOP
ALLCE
LLBLK
Process
Duration
BSC691
0
ADD
UCNOP
ALLCE
LLBLK
MOD
UCNOP
ALLCE
LLBLK
Issue 02 (2013-11-15)
Unit: min
Actual Value Range: 2~30
Default Value: None
WRFD021102
Cell
Barring
45
WCDMA RAN
Cell Barring Feature Parameter Description
7 Counters
Counters
Issue 02 (2013-11-15)
46
WCDMA RAN
Cell Barring Feature Parameter Description
8 Glossary
Glossary
Issue 02 (2013-11-15)
47
WCDMA RAN
Cell Barring Feature Parameter Description
9 Reference Documents
Reference Documents
None
Issue 02 (2013-11-15)
48