Professional Documents
Culture Documents
Tutorial 5 PDF
Tutorial 5 PDF
20)
Analysis Steps
1. In the model tree double click on the Parts node (or right click on parts and
select Create)
2. In the Create Part dialog box name the part and
a. Select 3D
b. Select Deformable
c. Select Solid
d. Set approximate size = 200
e. Click Continue
6. a. Sketch the cylinder on the plane.: The center of the circle is (0, 5), the radius is 3.
9. Assign section select assign section in the red box shown below
a. Select the entire geometry in the viewport and press Enter
b. Select the section created above (Machine)
c. Click OK
10. Expand the Assembly node in the model tree and then double click
onInstances
a. Select Dependent for the instance type
b. Click OK
12. Expand the Field Output Requests node in the model tree, and then double click
on FOutput1 (FOutput1 was automatically generated when creating the step)
a. check the variables U
b. Click OK
15. In the model tree double click on Mesh for the part.
a. In the toolbox area click on the Global seeds, assign global seed size to 2.