Professional Documents
Culture Documents
Isolated Footing Design
Isolated Footing Design
1 The design as per IS 456:2000 (Plain and reinforced concrete - code of practice) - Limit state
2 The design approach is on the conservative side and for a economical design the user should
or any other relavant software/tool
3 For bearing capacity of soil the user refer documents related to soil investigation of the site.
4 Warning message is displayed if the footing pressure exceeds soil bearing capacity or if it is le
5 For Pipe rack foundations, it should be ensure that the minimum contact area of footing with
6 This design sheet carries out Flexure design, One way shear check and Two way shear check
7 b= should be always the longer side of the column
8 d= should be always the shorter side of the column
9 Bf= should be always the the longer side of the footing
10 Df= should be always the shorter side of the footing
11 In flexure, the footing will be designed for maximum pressure
12 All
Disclaimer
This program has been prepared with utmost accuracy, still the AUTHOR does not hold any
responsibility for discrepancy occuring due to the use/misuse of this program
dation
Go to Footing Design
Revision notes
d by the user.
Column no.
load case
Concrete grade, M
Steel grade, Fe
Axial load, kN
My, kNm
Mz, kNm
Column size, b
Column size, d
SBC of soil, kN/m2
Design factor
d1
Y-Axis
b
149 kN
Bf
b1
14.9 kN
163.9 kN
Area of footing
size of footing, Bf
size of footing, Df
Projection, b1
Projection, d1
1.64 m2
1.7 mt, for My (this should be longer)
1.7 mt, for Mz
0.475 mt
0.525 mt
Df
Z-Axis
Footing Pressure,
Pmax = P/A + My/Zy + Mz/Zz
Pmax
90.03 kN/m2
Pmin = P/A - My/Zy - Mz/Zz
Pmin
13.09 kN/m2
Eccentricity:
Y
X
L
2/3 L
L
Y
1.48 mt
0.22 mt
1.7 mt
1.13 mt
Flexure design:
For section efbg
pressure@f
pressure@b
48.99 kN/m2
90.03 kN/m2
Moment@eg. Meg
Mu
d req
d provided
Mu/bd2
pt
Ast
provide
10.16 kNm
10.16 kNm
60.64 mm
350 mm
0.08 N/mm2
0.120 %
420.0 mm2/ mt width
16# 125 C/C
Shear Chk.
One way Shear : At distance d from face of column.
Vu
28.70 kN
Vuc
154.84 kN
Safe
Two way Shear : At distance d/2 from face of column.
Perimeter
4200 mm
S.F. at this section
191.48 kN
Stress
Permissible stress
Check in other direction :
For section abcd
pressure@b
pressure@c
Moment@ad, Mad
Mu
d req
d provided
M/bd2
pt
Ast
provide
0.13 N/mm2
0.72 N/mm2
Safe
90.03 kN/m2
54.12 kN/m2
12.41 kNm
12.41 kNm
67.02 mm
550 mm
0.04
0.120 %
660.0 mm2/ mt width
16# 125 C/C
Instructions
Revision notes
Data:
Column no.
load case
Concrete grade, M
Steel grade, Fe
Axial load, kN
My, kNm
Mz, kNm
Column size, b
Column size, d
SBC of soil, kN/m2
Design factor
20
500
292 kN
-5.67 kNm
0.07 kNm
300 mm
300 mm
120 kN/m2
1.5
292 kN
29.2 kN
321.2 kN
2.68 m2
2.09 mt
2.09 mt
0.895 mt
0.895 mt
Footing Pressure,
Pmax = P/A + My/Zy + Mz/Zz
Pmax
63.17 kN/m2
Pmin = P/A - My/Zy - Mz/Zz
Pmin
70.53 kN/m2
Eccentricity:
Y
X
L
2/3 L
b
qu
Eff. qu
0.99 mt
1.10 mt
2.09 mt
1.39 mt
2.09 mt
100.2724297 kN/m2
100.2724297 kN/m2
Shear Chk.
One way Shear : At distance d from face of column.
pt assumed
0.25 %
Designed shear stress
0.36 N/mm2
vu
124.6937799
d=
194.98 mm
d provided
300.00 mm
Two way Shear : At distance d/2 from face of column.
Perimeter
2400 mm
S.F. at this section
401.90 kN
Ks
1.00
tc
1.12 N/mm2
tv
0.56 N/mm2
Resistance
804.98 N/mm2
Safe
Flexure design:
For section efbg
pressure@f
pressure@b
Moment@eg. Meg
Mu
d provided
Mu/bd2
pt
pt provided
Ast
provide
Ast Provided
Check in other direction :
For section abcd
pressure@b
pressure@c
Moment@ad, Mad
Mu
d req
M/bd2
pt
Ast
provide
Ast provided
63.08 kN/m2
63.17 kN/m2
40.16 kNm
60.24 kNm
300.00 mm
0.67 N/mm2
0.160 %
0.250
750.0 mm2/m width
12# @125c/c
814 mm2/m width
63.17 kN/m2
70.62 kN/m2
40.16 kNm
60.24 kNm
150.47 mm
0.67
0.205 %
615 mm2/m width
12# @125c/c
814 mm2