Professional Documents
Culture Documents
Stator Casting Mold STM-13: Click To Enlarge
Stator Casting Mold STM-13: Click To Enlarge
STM-13
Click to enlarge
This is the Stator Casting mold used in our tutorial video. We know that you can make this
as a do-it-yourselfer. But sometimes, it's nice to save time with things ready to go so you
can focus on more important aspects of your project.
The cavity makes a stator that is 1/2" thick, 13-1/2" in diameter with a 3-1/4" ID. This is an
ideal size for 9 coil, 12 pole alternator.
used with our 9" rotor disks.
Made from Melamine, everything is pre-cut and drilled. Hardware is included.