Professional Documents
Culture Documents
3rd Year Communication - 2017 - Extra - Optional - Projects - P PDF
3rd Year Communication - 2017 - Extra - Optional - Projects - P PDF
Date Time
3- Instructions
a- The projects are optional, no need for students with high years
work marks to do them. They are directed only to students with low
marks if they want to enhance their marks.
c-Lab circuits will be handled and kept until the first week of the
second term. It will be then delivered to the student.
5 Marks Projects
2- Build a digital PIR motion detector for security systems. You may use
AM622 digital sensor or equivalent. You should use small Fresnel lens
for focusing the signal. The time of the signal should be controlled by a
resistor. Do not use light dependent resistor so that the sensor works in
light and dark. When motion happens, the sensor outputs a signal
connected to LED for the predetermined time. The circuit should be
battery operated.
3- Build an analog PIR motion detector for security system. You may use
D203S analogue sensor or equivalent with motion sensor IC such as
LP8072 or equivalent. The time of the signal should be controlled by a
resistor. Do not use light dependent resistor so that the sensor works in
light and dark. When motion happens, the sensor outputs a signal
connected to LED for the predetermined time. The circuit should be
battery operated.
10 Marks Projects
1- Interface 8x8 full color RGB module dot matrix module to any
microcontroller of your choice (AVR, PIC, Arduino,
AT89C51ED2, ) You should write C code to display several
patterns (of 8 colors) on the module. The columns should be
driven by a three shift register chips such as 74164 (or
equivalent)