Professional Documents
Culture Documents
Introduction:
A double acting cylinder drives a splined shaft through a helical ball cage to provide rotary
motion. When the door reaches the closed position, the actuator lifts the door shaft and
door panel approximately 10mm,enabling latches on the door panel to engage mating
wedges on the door jambs.The door panel is held closed as long as air pressure is applied
the actuator.
3) The door panel can be specially designed to match with full bus design. It is made
of aluminum alloy, which has the attributes of light weight, high strength and long life.
Operating principle:
1)Auto operation :When open or close switch is pushed, the 5-way 2-position
solenoid valve will be actuated, which drives linear pneumatic cylinder move up and down.
Through splined shaft,the linear motion transfer to rotation, which cause the door open or
close.
2)Emergency release: In case of emergency, rotate the emergency valve 90 degree to
release the air pressure. The door panel will drop as soon as air pressure in the cylinder is
low. Push the door panel manually to open the door
3) Anticlamping: In case the passenger or other items are clamped during the vehicle
door closing, the door panel will be lifted and actuate the limit switch to reverse the motion
to open the door
Main Parameter:
Working temperature 40 to 60
Working air pressure 0.4 MPa to 0.8 MPa
Control voltage DC12V,DC24V
Max. lift height 18 mm
Load capacity 3200 N
Endurance 500000 times
Swing direction Left/ right
Tel:(86) 13770850076
Email: ivydoors@163.com
Skype: kateliunj