Professional Documents
Culture Documents
Introduction:
Application: mainly used as the transit bus entrance and exit doors.
1) The base-plate assembly (the most important component) is the actuator of the
power door system, which consists of pneumatic cylinder, solenoid valve, shaft stud, and
controls.
Operating principle:
1)Auto operation :When open or close switch is pushed, the solenoid valve will be
actuated, which actuate the double acting pneumatic cylinder. The liner motion of cylinder
transfers to door shaft rotation through shaft swing arm on the baseplate. With guide roller
which is mounted on the top of door panel moving along the roller channel, the door panel
rotates inward or outward to open or close.
3) Anticlamping: In case the passenger or other items are clamped during the vehicle
door closing, the sensitive edge of door panel will be actuated to reverse the motion to
open the door.
Main Parameter:
Tel:(86) 13770850076
Email: ivydoors@163.com
Skype: kateliunj