Fagioli was contracted to lift the twin beam of a 800 tonne gantry crane weighing 2,200 tonnes from ground level to a height of 50 meters at a new shipbuilding hall in Wismar, Germany. The beams spanned 140 meters. Fagioli used 8 L600 jacks on cantilever beams atop the crane pier and shear legs, which were guyed during erection and lifting. Fagioli also lifted 14 double trusses weighing 800-1000 tonnes for the roof and main access doors of the new hall.
Fagioli was contracted to lift the twin beam of a 800 tonne gantry crane weighing 2,200 tonnes from ground level to a height of 50 meters at a new shipbuilding hall in Wismar, Germany. The beams spanned 140 meters. Fagioli used 8 L600 jacks on cantilever beams atop the crane pier and shear legs, which were guyed during erection and lifting. Fagioli also lifted 14 double trusses weighing 800-1000 tonnes for the roof and main access doors of the new hall.
Fagioli was contracted to lift the twin beam of a 800 tonne gantry crane weighing 2,200 tonnes from ground level to a height of 50 meters at a new shipbuilding hall in Wismar, Germany. The beams spanned 140 meters. Fagioli used 8 L600 jacks on cantilever beams atop the crane pier and shear legs, which were guyed during erection and lifting. Fagioli also lifted 14 double trusses weighing 800-1000 tonnes for the roof and main access doors of the new hall.
www.fagioli.com info@fagioli.com CIVIL 21 In the construction of a new shipbuilding hall at Wismar, Fagioli was awarded the subcontract, by the main erection contractor Pirson Montage, to lift the complete twin beam of a Vulkan Kocks 800 tonne gantry crane from its ground level assembly position to a final height of 50 metres. The crane beams span 140 metres and weigh 2,200 tonnes.
The lift arrangement consisted
of eight Fagioli L600 jacks on cantilever beams on top of the gantry crane pier leg and shear leg. Each of the legs was guyed during their erection and the beam lifting process by Fagioli strand jack guying systems.
Fagioli were also contracted to
lift fourteen 800-1000 tonne double trusses for the roof structure, and the main access doors for the new hall. Above and below: Close up of cantilever jack support arrangement and anchor connection beam at the top of the lift.