SOLTEQ Equipment for Engineering Education & Research

LEVEL MEASUREMENT AND

CALIBRATION SYSTEM
MODEL: SE 301

HE Level Measurement and Calibration System (Model: SE 301) has been designed for students to
T study the principles of Level measurement and site calibration. The system consists of industrial grade
instrumentations to exhibit a realistic working environment of a true level process using various types of
measuring instruments.

The equipment is self-contained constructed on an
epoxy coated mild steel checker plate platform with
frame and four lockable castor wheels. The pump, tanks
and instrumentations are strategically located for easy
access. For safety reasons, the control panel is
protected against water splashes. The process piping
are made of stainless steel.
All electrical wirings are laid in flexible PVC conduit and
instrument cables are screened. Individual starters to
the pumps are provided. Power cable for the pump is
laid in separate conduit from instrument cables.
Identification tags are provided for every major item
found in the equipment. A mimic diagram is also
included showing the Process and Instrumentation
Diagram.
 SOLTEQ Equipment for Engineering Education & Research

EXPERIMENTAL CAPABILITIES
Level measurement using hydrostatic principle f) Sump Tank:

SOLTEQ
(bubbler tube) Capacity : 120-L
Level measurement using direct mounted level Material : Stainless Steel
transmitter
Open/closed tank level measurement g) Level Tank:
Level measurement methods comparison Capacity : 60-L
Calibration of various level transmitters Material : Stainless Steel
Configurations and parameters study of level
transmitter h) Pressure Gauges:
Effects of temperature, pressure and liquid Type : Bourdon Tube
composition on level measurement Dial size : 100 mm
Demonstration of instrumental set-up and Range : a) 0 to 100 psig
installation b) 0 to 5 psig
ISO 9000 Standard Calibration Procedure
i) Relief Valve:
Type : Spring Loaded
SPECIFICATIONS Material : Brass/Bronze

a) Output Receiver/Recorder
Type : Continuous pen REQUIREMENTS
No of pen : 2
Chart : Z-fold Electrical : 230VAC/1-phase/50Hz/13 Amp
Chart speed : 3600 m/hr, Stepped Pneumatic air : 20 LPM @ 100 psig
Water supply : Laboratory tap water
b) Differential Pressure Transmitters 2 units
Type : NPT female
Size : OVERALL DIMENSIONS
Range : 2 to 100 kPa
Output : 4 to 20mA Height : 2.00 m
Electrical connections: 2 Width : 1.22 m
Communication: HART communication Depth : 0.61 m

c) Rotameter:
Range : 0 to 20 LPM MANUAL
Size : 3/4"
The unit comes with Operating and Experimental
d) Hand Valve: manuals in English.
Type : Ball/globe
Material : Brass/Stainless Steel
TRAINING
e) Air Pressure Regulator
Supply : 100 psig Training shall be provided upon handing over of
Output : 0 to 5 psig the unit.
 SOLTEQ Equipment for Engineering Education & Research

SOFTWARE & E - LEARNING

Our range of teaching equipment can be complemented with our

SOLDAS and SOLCAL software.

SOLDAS - Supervisory Control & Data Acquisition

- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results

SOLCAL - Computer Aided Learning

- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals

Contact us for a catalog CD

SOLUTION ENGINEERING SDN. BHD. AGENT:
(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,
47100 Puchong, Selangor Darul Ehsan, Malaysia.
Tel. No. : +(603) 80758000
Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,
Bukit Jalil, 57000 Kuala Lumpur, Malaysia.
Tel. No. : +(603) 8996 0023
MSC- Status
Email : solution@solution.com.my BUATAN MALAYSIA Company
Web site : http//www.solution.com.my/