The document contains calculations for curved roof panels on the inside of a curve. It provides details like panel type, roof slope measurements, distance measurements from eave or ridge points, lap distances, straight lengths, bend angles, number of strokes, die angles, and calculated total panel lengths and check lengths for both an inside curved eave panel and an inside curved ridge panel.
The document contains calculations for curved roof panels on the inside of a curve. It provides details like panel type, roof slope measurements, distance measurements from eave or ridge points, lap distances, straight lengths, bend angles, number of strokes, die angles, and calculated total panel lengths and check lengths for both an inside curved eave panel and an inside curved ridge panel.
The document contains calculations for curved roof panels on the inside of a curve. It provides details like panel type, roof slope measurements, distance measurements from eave or ridge points, lap distances, straight lengths, bend angles, number of strokes, die angles, and calculated total panel lengths and check lengths for both an inside curved eave panel and an inside curved ridge panel.
Roof slope - Hor 10 Roof slope - Hor First Purlin Distance from Eave Ridge point to Last purlin 600 point (Orthogonal) Distance (Orthogonal) Eave point to Last Girt 603 Distance(Y) Lap Distance at Roof (D5) 10 Lap Distance at Roof (D6) Lap Distance at Wall (D7) 10
Straight Length @ Wall side 68 mm Straight Length
Straight Length @ Roof side 68 mm Length Of Panel 618 mm Length Of Panel Check Length 473 mm Check Length Bend Angle 96 degrees Bend Angle No. Of Strokes 24 No. Of Strokes Die Angle 4 degrees Die Angle Developed by : Rajeevan / PRD Ridge Panel Calculation
Type-S
Inside Curved Panel
Check for Tot Len & check Len 1 Straight Length 1 500 10 Straight Length 2 338
400 Bend Angle 55
Radius 300 75 Panel Thick 34 Die angle 5
435 mm No. Of Strokes 11
Curve Length 262 912 mm Length of Panel 1,100 mm 900 mm Check Length 969 mm 12 degrees 3 4 degrees