Professional Documents
Culture Documents
X X TZ-Silenziotestregistrierung
ET
VD
I 6022
Tested to VDI 6022
Type Page
1 TZ-Silenzio General information 1.1 80
Order code 1.1 83
Aerodynamic data 1.1 86
Quick sizing 1.1 87
Dimensions and weight TZ-Silenzio 1.1 88
Dimensions and weight TZ-Silenzio-D 1.1 89
Installation details 1.1 90
Specification text 1.1 92
Basic information and nomenclature 1.5 1
Maintenance
Maintenance-free as construction
and materials are not subject to wear
BP3 Actuator
Universal controller with MP bus interface
BPB Spring return actuator
TROX/Belimo
BPG Static Fast-running actuator
BB3 Volume flow rate Universal controller Actuator
BBB TROX/Belimo Spring return actuator
XD1 Universal controller Actuator
Static, integral
XD3 TROX/Gruner Spring return actuator
BR3 Actuator
Universal controller with MP bus interface
BRB Spring return actuator
TROX/Belimo
BRG Static, 100 Pa Fast-running actuator
BG3 Differential pressure Differential pressure controller Actuator
BGB TROX/Belimo Spring return actuator
XE1 Differential pressure controller Actuator
Static, integral 100 Pa
XE3 TROX/Gruner Spring return actuator
Order code detail Control function Controller Differential pressure transducer Actuator
EASYLAB
Room supply air
ELAB Room pressure EASYLAB controller TCU3 Static, integral Fast-running actuator
Single controller
TCU-LON-II
TMA Fast-running actuator
Room supply air Electronic controller TCU-LON-II
Static, integral
Room pressure with LonWorks interface Fast-running actuator
TMB
(brushless motor)
Technical data
1
Nominal sizes 125 315
Volume flow rate range 30 840 l/s or 108 3024 m/h
Volume flow rate control range
Approx. 10 to 100 % of the nominal volume flow rate
(unit with dynamic differential pressure measurement)
Minimum differential pressure 5 65 Pa
Maximum differential pressure 1000 Pa
Operating temperature 10 50 C
Order code TZ-Silenzio with EASYLAB for room control and single operation
1 LABCONTROL
TZSilenzio D / 200 / ELAB / RS / ULZ / LAB / ...
EASYLAB
Useful additions
Room control panel
BE-LCD-01 40-character display
Volume flow rate ranges Volume flow rate ranges and minimum differential pressure values
1
pst min
The minimum differential Nominal size
l/s m/h Pa %
pressure of VAV terminal
30 108 5 5 8
units is an important
factor in designing the 70 252 10 20 7
125
ductwork and in rating 125 450 35 60 5
the fan including 180 648 65 120 5
speed control. 45 162 5 5 8
Sufficient duct pressure 110 396 10 20 7
160
must be ensured for all 195 702 30 55 5
operating conditions 275 990 55 105 5
and for all control units. 65 234 5 5 8
he measurement points
150 540 10 20 7
for fan speed control must 200
be selected accordingly. 265 954 30 60 5
380 1368 55 120 5
85 306 5 5 8
200 720 10 20 7
250
345 1242 30 60 5
495 1782 60 115 5
145 522 5 5 8
335 1206 15 20 7
315
590 2124 35 50 5
840 3024 65 105 5
TZ-Silenzio
TZ-Silenzio with secondary silencer TS
The volume flow rates given for VAV terminal units depend on the nominal size and on the control component
(attachment) that is installed. The table gives the minimum and maximum values for a VAV terminal unit.
Some control components may only have a limited volume flow rate range. This applies in particular to control
components with a static differential pressure transducer. For volume flow rate ranges for all control components
refer to our Easy Product Finder design programme.
Air-regenerated noise Quick sizing: Sound pressure level at differential pressure 150 Pa
Air-regenerated noise
Case-radiated noise
1
Quick sizing tables
Nominal size
provide a good overview LPA LPA1 LPA2 LPA3
of the room sound l/s m/h dB (A)
pressure levels that can
be expected. Approximate 30 108 15 5 10 8
intermediate values can 70 252 26 16 19 19
125
be interpolated. Precise 125 450 34 23 26 26
intermediate values and 180 648 39 28 30 31
spectral data can be 45 162 15 5 13 10
calculated with our
Easy Product Finder 110 396 27 17 22 21
160
design programme. 195 702 34 23 29 29
275 990 37 27 34 34
65 234 13 1 12 8
The first selection criteria
for the nominal size are 150 540 23 12 22 18
200
the actual volume flow 265 954 29 17 28 26
rates min and max. 380 1368 32 22 33 31
The quick sizing tables 85 306 14 3 13 8
are based on normally
200 720 23 12 23 19
accepted attenuation 250
levels. If the sound 345 1242 28 17 30 26
pressure level exceeds 495 1782 32 20 34 31
the required level, a larger 145 522 15 4 17 12
VAV terminal unit and/or 335 1206 23 11 27 23
a silencer is required. 315
590 2124 28 16 35 31
840 3024 32 21 39 36
TZ-Silenzio
TZ-Silenzio with secondary silencer TS
TZ-Silenzio-D
Dimensions TZ-Silenzio
20 B 20
M8
30
H
M238FG1
HB
L B
Detail of flange B
Compressible seal, ~ 80
to be provided by others
Dimensions TZ-Silenzio-D
20 B 20
M8
30
H
HB
L B
Detail of flange
B
Compressible seal, ~ 80
to be provided by others
H
H
M p
M p
A bend without a straight duct section upstream The stated volume flow rate accuracy
of the VAV terminal unit has only a negligible will be achieved even when the VAV terminal unit
effect on the volume flow rate accuracy. is installed in a branch just off the main duct.
B
B
M p
M p
A bend without a straight duct section upstream The stated volume flow rate accuracy
of the VAV terminal unit has only a negligible will be achieved even when the VAV terminal unit
effect on the volume flow rate accuracy. is installed in a branch just off the main duct.
150
for commissioning
and maintenance. It may
be necessary to provide 25
sufficiently sized 0
inspection access 250
openings.
Space required
Attachments
mm
VARYCONTROL
Easy controller 700 300 300
Compact controller 700 300 300
Universal controller 700 300 300
LABCONTROL
EASYLAB 700 350 400
Standard text Rectangular VAV terminal units for variable Technical data
1 and constant air volume systems for demanding
acoustic requirements, suitable for supply
Nominal sizes: 125 315
Volume flow rate range:
This specification text
or extract air, available in 5 nominal sizes. 30 to 840 l/s or 108 to 3024 m/h
describes the general
properties of the product. High control accuracy even in case Volume flow rate control range (unit with
Texts for variants can be of unfavourable upstream conditions. dynamic differential pressure measurement):
generated with our Ready-to-commission unit which consists approx. 10 to 100 %
Easy Product Finder of the mechanical parts and the electronic control of the nominal volume flow rate
design programme. components. Each unit contains an averaging Minimum differential pressure: 5 65 Pa
differential pressure sensor for volume flow rate Maximum differential pressure: 1000 Pa
measurement, a damper blade, and an integral
attenuator. Factory-assembled control Attachments
components complete with wiring and tubing. Variable volume flow control with electronic Easy
Differential pressure sensor with 3 mm controller to connect an external control signal;
measuring holes (resistant to dust and pollution) actual value signal can be integrated
Both ends suitable for the connection into the central BMS.
of air duct profiles. Supply voltage 24 V AC/DC
Casing with acoustic and thermal insulation. Signal voltages 0 10 V DC
Position of the damper blade indicated Possible override controls with external
externally at shaft extension. switches using volt-free contacts:
Closed blade air leakage to EN 1751, class 4. CLOSED, OPEN, min and max
Casing air leakage to EN 1751, class B. Potentiometers with percentage scales
Complies with VDI 2083, clean room class 3, to set the volume flow rates min and max
and US standard 209E, class 100. The actual value signal relates to the nominal
Hygiene complies with VDI 6022, DIN 1946, volume flow rate such that commissioning
part 4, as well as EN 13779 and VDI 3803. and subsequent adjustment are simplified
Volume flow rate control range:
Special characteristics approx. 10 100 %
Hygiene tested and certified of the nominal volume flow rate
Direct connection of ducting Clearly visible external indicator
Factory set-up or programming light for signalling the functions:
and aerodynamic function testing Set, not set, and power failure
Volume flow rate can be measured Electrical connections with screw terminals.
and subsequently adjusted on site; Double terminals for looping the supply voltage,
additional adjustment tool may be necessary i.e. for the simple connection of voltage
transmission to the next controller.
Materials and surfaces
Casing made of galvanised sheet steel Sizing data
Damper blade and differential ______________________________ [m/h]
pressure sensor made of aluminium pst ______________________________ [Pa]
Lining is mineral wool LPA air-regenerated noise __________ [dB(A)]
Plastic bearings LPA Case-radiated noise ___________ [dB(A)]
Mineral wool
To EN 13501, fire rating class A1,
non-combustible
RAL quality mark RAL-GZ 388
Biosoluble and hence hygienically
safe according to the German TRGS 905
(Technical Rules for Hazardous Substances)
and EU directive 97/69/EG
Faced with glass fibre fabric as protection
against erosion through airflow velocities
of up to 20 m/s
Inert to fungal and bacterial growth
1 Order options
LABCONTROL
Type
TZ-Silenzio VAV terminal unit, supply air
Module expansions
Option 1: Power supply
No entry: 24 V AC
EASYLAB Acoustic cladding T EM-TRF for 230 V AC
No entry: none U EM-TRF-USV for 230 V AC, provides
D With acoustic cladding uninterruptible power supply (UPS)
Nominal size Option 2: Communication interface
125 No entry: none
160 L EM-LON for LonWorks FTT-10A
200 B EM-BAC-MOD-01 for BACnet MS/TP
250 M EM-BAC-MOD-01 for Modbus RTU
315 I EM-IP for BACnet/IP,
Modbus/IP and webserver
Attachments (control component) R EM-IP with real time clock
ELAB EASYLAB controller TCU3
Option 3:
with fast-running actuator
Automatic zero point correction
Equipment function No entry: none
Room control Z EM-AUTOZERO Solenoid valve
RS Supply air control (Room Supply) for automatic zero point correction
PC Differential pressure control
Additional functions
Single operation Only for room control
SC Supply air controller (equipment function)
Raum management function
External volume flow rate setting has been deactivated
Only for single operation LAB Extract air led system (laboratories)
E0 Voltage signal 0 10 V DC CLR Supply air led system (clean rooms)
E2 Voltage signal 2 10 V DC Raum management function is active
2P On-site switch contacts LAB-RMF Extract air led system (LAB)
for 2 switching steps CLR-RMF Supply air led system (CLR)
3P On-site switch contacts
for 3 switching steps Operating values [m3/h or l/s, Pa]
F Volume flow rate constant value, For equipment function 'room control'
without signalling with additional function RMF
Total room extract air/supply air
1: Standard mode
2: Reduced operation
3: Increased operation
4: Constant room supply air
5: Constant room extract air
6: Supply air/extract air difference
psetpoint: Setpoint pressure
(only with differential pressure control)
For equipment function
'single operation'
E0, E2: min / max
2P: 1 / 2
3P: 1 / 2 / 3
F: 1
Useful additions
Room control panel
BE-LCD-01 40-character display
Order options
LABCONTROL
Type
TZ-Silenzio VAV terminal unit, supply air
Equipment function
RS Room supply air 1
PS Differential pressure control supply air
TCU-LON-II Acoustic cladding (Pressure Supply)
No entry: none
D With acoustic cladding Operating values [m3/h or l/s, Pa]
Depending on equipment function
Nominal size RS: / constant
125 PS: / constant / pSoll
160 The room control volume flow rates
200 are related to the total extract air volume
250 flow rate for the room
315
Product selection
Principal dimensions
Nomenclature
Construction
Correction values for system attenuation
Measurements
Sizing and sizing example
Function
Operating modes
Product selection
1
Type
LVC TVR TVJ TVT TZ-Silenzio TA-Silenzio TVZ TVA TVM TVRK TVLK TVR-Ex
Type of system
Supply air
Extract air
Dual duct (supply air)
Duct connection, fan end
Circular
Rectangular
Volume flow rate range
Up to [m/h] 1080 6050 36360 36360 3025 3025 6050 6050 6050 6050 1295 6050
Up to [l/s] 300 1680 10100 10100 840 840 1680 1680 1680 1680 360 1680
Air quality
Filtered
Office extract air
Polluted
Contaminated
Control function
Variable
Constant
Min/Max
Pressure control
Master/Slave Master
Shut-off mode
Leakage
Low leakage
Acoustic requirements
High < 40 dB(A)
Low < 50 dB (A)
Other functions
Volume flow rate measurement
Special areas
Areas with explosive atmospheres
Labs, clean rooms,
operating theatres
(EASYLAB, TCU-LON II)
Possible
Possible under certain conditions: Robust unit variant and/or specific control component (attachment) or useful additional product
Not possible
D [mm] H [mm]
Pitch circle diameter of flanges Duct height
D [mm] H [mm]
Outside diameter of flanges Screw hole pitch of flange (vertical)
D [mm] H [mm]
Inside diameter of the screw holes of flanges Outside dimension of flange (height)
L [mm] H [mm]
Length of unit including connecting spigot Unit height
L [mm] n[]
Length of casing or acoustic cladding Number of flange screw holes
B [mm] T [mm]
Duct width Flange thickness
B [mm] m [kg]
Screw hole pitch of flange (horizontal) Unit weight including the minimum required
attachments (e.g. Compact controller)
fm [Hz]
Octave band centre frequency
LPA [dB(A)]
A-weighted sound pressure level
of air-regenerated noise of the VAV terminal unit,
system attenuation taken into account
LPA
LPA1 [dB(A)]
A-weighted sound pressure level Air-regenerated noise
of air-regenerated noise of the VAV terminal unit Case-radiated noise
with secondary silencer, system attenuation taken
into account
LPA2 [dB(A)]
A-weighted sound pressure level
of case-regenerated noise of the VAV terminal
unit, system attenuation taken into account
LPA3 [dB(A)]
A-weighted sound pressure level
of case-regenerated noise of the VAV terminal unit
with acoustic cladding, system attenuation taken
into account
Characteristic of the setpoint value signal Characteristic of the actual value signal
nom (100%) nom (100%)
max
Volume flow
Volume flow
Setting range
min
0 2 10 V DC 0 2 10 V DC
Setpoint value signal Actual value signal U5
0 10 V DC 0 10 V DC
2 10 V DC 2 10 V DC
pst [Pa] 1
Static differential pressure
pst min [Pa]
Static differential pressure, minimum
The static minimum differential pressure
is equal to the pressure loss of the VAV terminal st
unit when the damper blade is open,
caused by flow resistance
(sensor tubes, damper mechanism)
If the pressure on the VAV terminal unit
is too low, the setpoint volume flow rate may
not be achieved, not even when the damper
blade is open
Important factor in designing the ductwork
and in rating the fan including speed control
Sufficient duct pressure must be ensured for all
operating conditions and for all terminal units,
and the measurement point or points for speed
control must have been selected accordingly
to achieve this
The quick sizing tables Reducing the sound pressure level of the air-regenerated noise
1 show the sound pressure
levels that can be
expected in a room both
for the air-regenerated
noise and for the case-
radiated noise. The sound
pressure level in a room
results from the sound
power level of the
products for a given
volume flow rate and
differential pressure
and the attenuation
and insulation on site.
Generally accepted
attenuation and insulation
values have been taken
into account.
The distribution of air
across the ductwork,
changes of direction,
end reflection, and room
attenuation all affect
the sound pressure level
of the air-regenerated
noise.Ceiling insulation
VAV terminal unit End reflection
and room attenuation
Distribution in the ducting Ceiling insulation
influence the sound
pressure level of the case- Change of direction
radiated noise.
One change of direction, System attenuation per octave to VDI 2081 for the calculation of the air-regenerated noise
e.g. at the horizontal
connection of the diffuser 63 125 250 500 1000 2000 4000 8000
plenum box, has been Centre frequency [Hz] L
taken into consideration dB
for the system attenuation
values. Vertical Change of direction 0 0 1 2 3 3 3 3
connection of the plenum
box does not result Mndungsreflexion 10 5 2 0 0 0 0 0
in a system attenuation.
Additional bends result Room attenuation 5 5 5 5 5 5 5 5
in lower sound pressure
levels. The calculation is based on the end reflection for nominal size 250
Ceiling insulation 4 4 4 4 4 4 4 4
Room attenuation 5 5 5 5 5 5 5 5
st
LP
The sound pressure levels for air-regenerated noise LPA given by us result from measurements
in a reverberation chamber. The sound pressure LP is measured for the entire frequency range.
The evaluation of the measurements, including system attenuation and A-weighting,
results in the sound pressure level LPA.
st
LP
The sound pressure levels for case-radiated noise LPA2 given by us result from measurements
in a reverberation chamber. The sound pressure LP is measured for the entire frequency range.
The evaluation of the measurements, including system attenuation and A-weighting,
results in the sound pressure level LPA2.
Quick sizing
TVZ-D/200
Air-regenerated noise LPA = 23 dB(A)
Case-radiated noise LPA3 = 24 dB(A)
max
Volume flow
+ -
min
Setpoint adjuster
Effective pressure transducer Supply air
Actuator Extract air
Volume flow controller
Setpoint value signal
t t
+ - + - + -