Professional Documents
Culture Documents
Applications
Mechanical Seals
58 E
Sealing Systems
according to API 682, 3rd Edition
and ISO 21049, 1st Edition.
Classification and Seal Selection.
Table of Contents
Foreword 3
Seal Selection
Appendix
EagleBurgmann in profile 29
EagleBurgmann
*) Fold-out pages SHV-D
This brochure provides basic information about ISO 21049 and API 682. It contains
a set of checklists and summaries which give a brief overview that will help to
select suitable EagleBurgmann sealing systems. ISO 21049 is an international
standard which is based on API 682 (a standard of the American Petroleum Insti-
tute). The content of these two standards is generally identical.
Both standards specify requirements and recommendations for the selection and
operation of shaft sealing systems in new or retrofitted centrifugal and rotary
pumps. They refer to pumps which are mainly used for hazardous, flammable and/
or toxic applications in the petroleum, natural gas and chemical industries.
The improvement of equipment reliability and the reduction of emissions and life-
cycle costs are the major targets of these standards.
The following table summarizes the history of API 682/ ISO 21049 and the pump
standards API 610/ ISO 13709:
The checklists, summaries and API plans are based on both standards. For further
and more detailed information please refer to the commercially available docu-
ments of API 682 3rd edition and ISO 21049.
EagleBurgmann
CGSH
3
Classification of Sealing Systems
API 682 and ISO 21049 specify a range of different sealing systems. Parame-
ters such as category, arrangement, configuration, type and API plans are to be
considered.
The chart overleaf is a quick overview about the basic features of the different
categories, arrangements and seal types. It also shows the links between these
parameters and marks default and optional selections.
Step I: The category determines the applicable seal chamber, basic seal design
features, maximum operating conditions, testing and data requirements. Each
category has special demands regarding the seal arrangement, configuration and
type. There are three different categories.
Step II: Determines the arrangement of the mechanical seal cartridges and their
possible configurations.
Step Ill: Definition of the seal type, the design and material of the spring element
and the secondary seals.
EagleBurgmann MFLWT80. It defines the appropriate operating limits. API 682 and ISO 21049 specify three
The universal primary
seal for both hot basic seal types, a fourth option is a totally engineered sealing system (ES).
and cold
applications Step IV: Completes the sealing system classification by selecting the required
in refineries.
API plan.
API 682 and ISO 21049 introduce a seal code which contains
information about the category, arrangement, type and API plan.
For further details please refer to page 27.
4
Categories, Arrangements and Seal Types
Step II Arrangement and configuration Step III Type and spring position Flexible element
Arrangement 1 1CW-FX Type A Rotary springs
Single seal cartridge Contacting Wet - FiXed throttle bushing Pusher seal Seal face surface
Category 1: carbon throttle bushing Temperature: -40 to 176 C (-40 to 350 F) speed < 23 m/s
Category 2: non-sparking metal throttle Pressure: 41 bar g (600 PSI) Stationary springs
bushing Multiple springs: Alloy C-276
Category 3: not applicable Single spring: SS 316 Seal face surface
O-rings: FKM or FFKM speed > 23 m/s
1CW-FL
NBR, HNBR, EPM, EPDM, TFE
Contacting Wet - FLoating throttle bushing
Category 3: carbon throttle bushing Type B Rotary bellows
Category 1 and 2: carbon throttle bushing Metal bellows seal with O-rings
Arrangement 2 2CW-CW Temperature: -40 to 176 C (-40 to 350 F) Stationary bellows
Pressure: 21 bar g (300 PSI)
Dual seal cartridge Contacting Wet - Contacting Wet Metal bellows: Alloy C-276
- pressure between seals 2CW-CS O-rings: FKM or FFKM
less than seal chamber NBR, HNBR, EPM, EPDM, TFE
pressure Contacting Wet - Containment Seal
- internal reverse balance (non-contacting or contacting CS) Type C Rotary bellows
feature 2NC-CS Metal bellows seal with flexible graphite
- fixed carbon throttle Temperature: -40 to 400 C (-40 to 750 F) Stationary bellows
Non-Contacting - Containment Seal
bushing Pressure: 21 bar g (300 PSI)
(non-contacting or contacting CS)
Metal bellows: Alloy 718
Arrangement 3 3CW-FB Sealing element: flexible graphite
Dual seal cartridge Contacting Wet - Face-to-Back Totally Engineered Sealing system (ES)
- pressure between seals 3CW-BB For service conditions outside the operating limits of type A, B and C
higher than seal
Contacting Wet - Back-to-Back Temperature: < -40 or > 260 C (< -40 or > 500 F) category 1
chamber pressure
< -40 or > 400 C (< -40 or > 750 F) category 2 and 3
- internal reverse balance 3CW-FF Pressure: > 21 bar g (300 PSI) category 1
feature
Contacting Wet - Face-to-Face > 41 bar g (600 PSI) category 2 and 3
- fixed carbon throttle
3NC-BB Surface speed: > 23 m/s (75 ft/s)
bushing
Shaft diameter: below 20 mm (0.75 inch) or above 110 mm (4.3 inch)
Non-Contacting - Back-to-Back Medium: highly corrosive fluids for which the specified materials in
3NC-FF API 682/ISO 21049 are not suitable, fluids with absolute
vapour pressures > 34 bar a (493 PSI), unstable liquid
Non-Contacting - Face-to-Face
properties (e.g. multiphase, non-Newtonian), high viscosity
3NC-FB or pour point above or within 20C (68 F) of the mini-
Non-Contacting - Face-to-Back mum ambient temperature.
Default configurations
Optional configurations
Optional design feature
5
Arrangement 1 Single Seal Configurations and API Plans
plugged
1cw-fl H75VN
Plan 13 Plan 62 Quench
Werb-Nr. 2841 External quench
Recirculation from seal
chamber to suction
F D Q
drain
Plan 23
Internal recirculation
through a cooler
TI
Plan 65
Each configuration is available for seal types A, B and C Leakage control by float
type level switch
Werb-Nr. 2787
Plan 31
Recirculation from
discharge through a
cyclone separator to
seal chamber LSH
drain
EagleBurgmann
H75
Plan 32
Option EB Client
External flush
FI
into the seal
chamber
PI
TI
Default configurations
Optional configurations
6
Arrangement 2 Dual Seal Configurations and API Plans
Pressure between seals less than seal chamber pressure
2cw-cw H75VK-PTA
lling LSH
LI if specied
LSL
2cw-cs H75VK+CGSH
Plan 13
Recirculation from seal Werb-Nr. 2790
chamber to suction
Plan 32
Option EB Client
External flush
FI
into the Plan 72
seal chamber Buffer gas system
PI
TI
2nc-cs CGSH-CGSH
are
PI
PSH
LI LSH
if specied drain
Recirculation from seal chamber Example: CGSH-CGSH (type A) Vapour recovery system for non-
to suction and circulation from condensing leakage
discharge to seal chamber
PSH PI
drain
Default configurations
Optional configurations
Werb-Nr. 2791
7
Arrangement 3 Dual Seal Configurations and API Plans
Barrier fluid pressure higher than seal chamber pressure
3cw-fb H75VK-PTA
Dead end (plugged connections) Example: H75VK-H75P (type A) Barrier fluid reservoir
PI PSL
lling LSH
LI if specied
LSL
3cw-bb H75VKP-D
WS\NNLK
3cw-ff SH
TI
if specied
3:3
MPSSPUN
;0
PMZWLJPMPLK
EagleBurgmann
Plan 14 SHV-D Plan 54
Recirculation from seal chamber Werb-Nr. 2794 External barrier fluid
to suction and circulation from system
discharge to seal chamber
L_[LYUHS
ZV\YJL
Default configurations
Optional configurations
8
Arrangement 3 Dual Seal Configurations and API Plans
Barrier gas pressure higher than seal chamber pressure
3nc-bb CGSH-KD
EB Client
3nc-ff RGS-D
if specied
FSH FE
F
PSL M I
WS\NNLK PCV L
PI
3nc-fb HRGS-DD
Werb-Nr. 2796
9
How to select the correct EagleBurgmann Sealing System
EagleBurgmann mechanical
seal MFLW85S20/75-TA1
used in pumps
(Ruhrpumpen) to seal gas oil
with sulphur. Temperature
217C, pressure 2.3 bar. 10
Sealing systems selection by seal features
< 21 (300)
Sour water 2 H75VK / H75P 52 TS
21 41 (300 600) A
< 21 (300)
Caustic, amines, crystallize 1 H75VN 62 SP24
< 80 (180) 21 41 (300 600)
H2SO4 (max. 20% at 25C)
< 21 (300) 3 H75VK / H75P 53A TS
H3P04 (max. 20% at 80C)
All other acids ES 3 Engineered seal note 3)
-40 -5 < 21 (300) 53A TS
Non-flashing hydrocarbons
Example: Seal selection by medium: see table above Non-hydrocarbon 4 Water 4 < 80 C 4 21 bar (g) 4 Type A 4 Arrangement 1 4 H75VN Plan
11
(-40 20)
21 41 (300 600) ES 3 SHPV-D 53B SPO
< 21 (300) MFL90 / MFL85P
Absolute vapour pressure -5 176 B or C 3 02+53A TS
or MFL65 / MFL85P
less than 1 bar (20 350)
21 41 (300 600) ES 3 SHPV-D 53B SPO
at pumping temperature 176 260 < 21 (300) ES 3
(350 500) 21 41 (300 600)
< 21 (300) ES 3 Engineered seal note 3)
260 400
(500 750) 21 41 (300 600)
-40 -5 < 21 (300) 53A TS
21 41 (300 600)
Flashing hydrocarbons
Operating limits
H75VN
p1(max) = 41 bar g (600 PSI)
t1 = -40176 C (-40 350 F)
vg(max) = 23 m/s (75 ft/s)
H75VP
Materials*)
Face: Carbon (A), SiC (Q1, Q2)
Seat: SiC (Q1, Q2)
O-rings: FKM, FFKM, EPDM, NBR, HNBR
Springs: Alloy C-276**)
Other parts: SS316 (1.4571)
Werb-Nr. 2802
SH
EagleBurgmann
H75 13
MFL85N
Werb-Nr. 2806
EagleBurgmann
14 MFL 85
Gas Seals Type A
EagleBurgmann
mechanical seal type
MFL65S2/125-TA1 in
Byron Jackson pump
to seal vacuum gas oil.
Temperature: 260 C,
pressure 12 bar.
Operating limits
HRGS-DD 3NC-FB
p1(max) = 41 bar g (600 PSI)
t1 = -20 176 C (-4 350 F)
vg(max) = 23 m/s (75 ft/s)
Materials*)
Werb-Nr.Face:
2803 Carbon (A), SiC (Q1, Q2)
Seat: SiC (Q1, Q2)
O-rings: FKM, FFKM, EPDM, NBR, HNBR
Springs: Alloy C-276**)
Other parts: SS316 (1.4571)
Werb-Nr. 2804 15
Containment Seals Type A
A containment seal is a safety seal. In case of primary seal failure it shall operate
for a minimum of 8 hours at seal chamber conditions. It can be found in the
default configuration 2CW-CS and the optional configuration 2NC-CS
CGSH
Containment seals can be of non-contacting or contacting kind.
Non-contacting containment seals feature aerodynamic grooves which provide
a reliable lift-off of the seal faces even at low velocities.
Contacting containment seals are used in connection with liquid buffer systems
but may also be used as dry running seal in connection with a Nitrogen purge.
Operating limits
CGSH CS
Non-contacting containment seal p1(max) = 25 bar g (363 PSI)
t1 = -20 176 C (-4 350 F)
vg(max)EM300
= 23 m/s (75 ft/s)
Materials
Face: Carbon (A), SiC (Q1, Q2)
Seat: SiC (Q1, Q2)
O-rings: FKM, FFKM, EPDM, NBR, HNBR
Springs: Alloy C-276**)
Other parts: SS316 (1.4571)
Operating limits
EagleEM300 CS
Contacting containment seal p1(max) = 2 bar g (29 PSI), dry operation
t1 = -40 176 C (-40 350 F)
vg(max) = 23 m/s (75 ft/s)
In the event of primary seal failure the EM300 will work as a
conventional wet lubricated seal in pressures up to 60 bar g
Werb-Nr. 2798
(870 PSI) for at least 8 hours.
Materials
Face: Special carbon
Seat: Pressureless sintered SiC
O-rings: FKM, FFKM, EPDM, FVMQ
Springs: Alloy C-276
Other parts: SS316
Werb.Nr. 2827
16
API Plans Overview
An API plan determines the piping or auxiliary system which is connected to the
seal chamber or/and the mechanical seal cartridge. Certain seal configurations
only work in combination with appropriate API plans. Other API plans can also
be applied to improve the performance of a mechanical seal. The combination of
external control and supply units which are used to realize a certain API plan is
usually called a Supply System.
Statoil
EagleBurgmann
MFL 65
17
API Plans Process Side
For general
applications. Product Plan 01
pumped is clean,
good lubrication
properties and heat
removal from the
mechanical seal.
Internal circulation
from the pump
discharge to the seal.
Seal chamber
cooling and neck Plan 02
bush are necessary,
unless otherwise
specified. Dead
end seal chamber
with no circulation.
Plugged connections
for possible future
circulation and
quench.
18
API Plans Process Side
Orifice
Used in applications SP24-047-D0 (3/4 NPT, bore dia. 3 mm)
with suspended Plan 31
SP24-048-D0 (flange 3/4, 600 lbs, RF, bore dia. 3 mm)
solids where the SG
of the particles is
2x that of the liquid. Strainer
Recirculation from SP18-023-D0 (3/4 NPT)
pump discharge SP18-024-D0 (flange 3/4)
through a cyclone
separator, clean fluid
to seal chamber, dirty Cyclone separator
fluid to suction. ZY62/1/2NPT-00 (SS316, 64 bar, 125 C, 1/2 NPT)
ZY62S2/NW21-D0 (SS316, 64 bar, 125 C, WN 1/2 600 lbs)
ZY203/3/4NPT-00 (SS316, 200 bar, 3/4 NPT)
ZY203/NW20-D0 (SS316, 80 bar, 150 C, WN 3/4 1500 lbs)
19
API Plans Process Side
Used in applications
with suspended Plan 41
solids where the SG
of the particles is
2x that of the liquid.
Temperature and
pressure in the seal
chamber is close to
the vapour pressure
of the product.
Recirculation from
pump discharge
through a cyclone
separator, delivering
clean fluid to a cooler
and then to the seal
chamber.
EagleBurgmann ZY203
cyclone separator
20
API Plans Between seals
EagleBurgmann GSS
buffer gas panel
21
API Plans Between seals
A N2
EagleBurgmann
TS 6000
thermosiphon system
22
API Plans Between seals
A connect to plan 75
B connect to plan 76
C N2
D quench connection to be located downwards
A N2
23
API Plans Atmospheric side
24
Appendix
The following tables give a quick overview about the requirements of the
different categories, the selection of suitable buffer or barrier fluids and the seal
coding system according to API 682 / ISO 21049 and the EagleBurgmann seal
code.
EagleBurgmann
mechanical seal
MFLW85S20 in pump
(Thyssen Ruhrpumpen)
to seal gas oil with
sulphur. Temperature
217 C,
pressure 2.3 bar.
25
EagleBurgmann API 682 tools
A valuable aid for selecting mechanical seals acc. to API 682 3rd edition.
26
Selection of Buffer and Barrier Mediums
Seal Coding System
Sealed fluid Barrier/buffer fluid Special notes General demands
100 mm2/s at 38 C and Three years continuous operation without adverse
Above 10 C
1 mm2/s to 10 mm2/s at 100 C deterioration.
Hydrocarbon fluid
5 mm2/s to 40 mm2/s at 38 C and Uncritical normal buffer/barrier fluid leakage.
Below 10 C
1 mm2/s to 10 mm2/s at 100 C Compatibility with the sealed medium.
Ethylene glycol may be considered as Compatibility with the materials of the sealing system
Mixture of water and
hazardous material and/or waste initial boiling point min. 28 C above exposed temperature.
ethylene glycol
Aqueous streams Flash point > service temperature (if O2 is present).
Dont use commercially available automotive
Mixture of water and Compatibility with max./ min. process temperature.
antifreeze (plating of additives at seal parts)
propylene glycol Freezing temperature < ambient temperature at site.
With little or no additive for wear/oxidation Viscosity < 500 mm2/s at minimum temperature.
Paraffin-based high purity oils Viscosity over the entire operating-temperature range.
Hydrocarbon streams resistance (plating of additives at seal parts)
Synthetic-based oils Consider gas solubility in viscous barrier fluids (> 10 bar).
ISO 21049 Seal category Seal arrangement Seal type API plans
API 682 Step I Step II Step III Step IV
01, 02, 11, 12, 13, 14, 21, 22, 23, 31, 32, 41, 51, 52, 53A, 53B, 53C,
Letters and numbers C1, C2, C3 A1, A2, A3 A, B, C
54, 61, 62, 65, 71, 72, 74, 75, 76
Arrangement 1 can be a 1CW-FX or 1CW-FL
Arrangement 2 can be a 2CW-CW, 2CW-CS or 2NC-CS
Note Arrangement 3 can be a 3CW-FB, 3CW-FF, 3CW-BB, 3NC-FB, 3NC-FF or 3NC-BB
Seal materials are not part of this code (default materials assumed)
A code for engineered mechanical seals (ES) is not specified
Features: category 2, arrangement 2, type A, flush plan 11 and flush plan 52
Example
Code: C2A2A1152
EagleBurgmann Seal family Seal diameter Design details Materials process side seal atmospheric side seal
-E ... (single seal)
H75VN, MFL85 / 90
/mm -PTA ... (tandem seal) according to EN 12756
Letters and numbers MFL65, MFLWT80 / 90
/inch -D ... (back-to-back) e.g. Q2Q2VMG-AQ2VMG
CGSH, ...
(face-to-face)
Note Coding: EagleBurgmann seal code, material code (ISO 21049 seal code, configuration code)
Features: Rotating metal bellows seal, seal diameter 70 mm, single seal, materials
Example 1
Code: MFL85N/70-EX, AQ2VM5G, (C2A1B1162, 1CW-FL)
Features: Pusher type seal, inboard seal diameter 50 mm, tandem arrangement, materials
Example 2
Code: H75VK/50-PTAX, Q2Q2VMG-AQ2VMG, (C2A2A1152, 2CW-CW)
Features: Engineered mechanical seal (ES), seal diameter 210 mm, single seal, materials
Example 3
Code: SHV/210-EX, AQ2VMG, (C2A1ES1161, 1CW-FX)
EagleBurgmann
mechanical seal
type MFLWT80/
S1-FD/58-E3 with
thermosiphon system
TS2000/M073-A1
to seal ethylene oxide
(Sulzer pumps). 27
Objectives and Category Details
Objective 1*): seal operation Continuously for 25,000 h without need for replacement
At least 25.000 h without need for replacement at any containment seal chamber pressure equal to or less than the seal
Objective 2*): containment seal operation
leakage pressure switch setting (< 0,7 bar g (10 PSI)) and for at least 8 h at the seal chamber conditions.
Complying with local emissions regulations or exhibiting a maximum screening value of 1,000 ml/m3 (1,000 ppm vol.) as
Objective 3*): emissions
measured by the EPA Method 21, whichever is more stringent.
Basic design features (4.1.3 / 6.1) Balanced mechanical seal, inside-mounted, cartridge design, type SS316 (1.4571) or better for sleeve and housing
Throttle bushing requirement for
arrangement 2 and 3 seals (7.2.3 / Fixed carbon, if specified
7.3.3.1)
Flush connection to the process side
If specified
for arrangement 3 seals (7.3.3.2)
Shaft diameter (1) 20 mm (0.75 inch) to 110 mm (4.3 inch)
ISO 3069 type C,
Seal chamber size (4.1.2) ISO 13709 / API 610 10th edition
ASME B73.1 and ASME B73.2
Cartridge seal sleeve size increments
None 10 mm increments (6.2.2.3.1)
required
Temperature range (4.1.2) -40 to 260 C (-40 to 500 F) -40 to 400 C (-40 to 750 F)
Pressure range, absolute (4.1.2) 22 bar a (315 PSI) 42 bar a (615 PSI)
Premium blister-resistant carbon (A) vs. Premium blister-resistant carbon (A)
Face materials (6.1.6.2)
self-sintered silicon carbide (Q1) vs. reaction-bonded silicon carbide (Q2)
Gland plate metal-to-metal contact
Required (6.2.1.2.2) Required inside and outside the stud circle diameter (6.2.2.2.2)
requirement
Tangential buffer/barrier fluid outlet for
If specified Required
arr. 2 and 3 seals (7.2.4.2 / 7.3.4.3)
Throttle bushing design requirement for Fixed carbon Fixed, non-sparking metal
Floating carbon
arrangement 1 seals (7.1.2.1) Floating carbon option (7.1.2.2)
Test as category 1 Test as category 2 Test as category 3, entire seal
Scope of vendor qualification test
Unless faces interchangeable with category 3 (10.3.1.2.3) assembly as a unit (10.3.1.2.2)
Distributed inlet flush requirements
When required or if specified (6.1.2.14 / 6.2.1.2.1) Required (6.2.3.2)
arr. 1 and 2 with rotating flexible element
Seal circulation device head flow curve
If specified Required
provided (8.6.2.2)
Proposal data requirements (11.2.1)
Minimal Rigorous
Contract data requirements (11.3.1)
*) All technical specifications are based on extensive tests
and our many years of experience. The diversity of possible
applications means, however, that they can serve only as
guide values. We must be notified of the exact conditions
of application before we can provide any guarantee for a
specific case. Subject to change.
**) API / ISO paragraphs in brackets
***) Please also ask for EagleBurgmann Apitex mechanical
seals
Pump (Ruhrpumpen)
with EagleBurgmann
seal H75S2/70-FTA1
according to
API 682, plan 52.
Medium: C -fraction;
3
Certifications
BURGMANN
ISO 9001:2000
EN 9100
ISO 14001
OHSAS 18001
Burgmann Headquarters Wolfratshausen (D) EagleBurgmann Niigata (J)
ATEX 94/9/EG
QHD
Qualified Hygienic
Design VDMA
DIN/EN 729-2
HPO certified
KTA 1401
Plant Eurasburg (D) Plant Judenburg (A)
Certified for
Nuclear
Power Plants
ISO TS 16949
WHG
Fachbetrieb ( 19)
Germanischer Lloyd
Approvals
IHK
Prfungsbetrieb
Umweltpakt
Bayern
__________
An alliance with a great deal to offer our customers and partners
All current Burgmann and the leading Japanese mechanical seal manufacturer Eagle Industry
certificates: have laid the foundation for a global cooperation: an alliance with a pronounced
www.burgmann.com/ understanding for quality and service as well as customer orientation.
QM
The basis of this arrangement is an intensive and trust-based cooperation that
notably strengthens the global competitiveness of both partners and makes them
one of the top suppliers of sealing technology on the world market. A worldwide
presence, market-orientated products and high-quality services are further key
factors of success. All this, together with the know-how and dedication of our
employees, means that we have considerable potential to offer our customers.
29
EagleBurgmann in your vicinity
Argentina Denmark Irak Netherlands Singapore Turkey
EagleBurgmann Argentina KE-Burgmann A/S WTE EagleBurgmann Netherlands B.V. EagleBurgmann Singapore Pte. Ltd. EagleBurgmann
Catalina M. de Boyle, 3117 (Calle 28) Expansion Joints Division Ukba Sq., Mahala 929 Koningsschot 9 52 Serangoon North Avenue 4, Endstryiel Szdrmazlk
San Martin - Buenos Aires Park All 34, Zuhak 2, House No. 5 NL-3905 PP Veenendaal #03-02 Ever Tech Building San. Ve Tic. Ltd. Sti.
Phone +54 11 47 54 63 50 DK-6600 Vejen P.O. Box No. 2421 Phone +31/ 318 / 54 20 00 555853 Singapore S.S. stanbul Kimya Sanayiciler
Fax +54 11 47 54 63 73 Phone +45 / 75 36 18 11 Al Jadria, Baghdad Telefax +31/ 318 / 54 15 35 Phone +65 / 64 81 34 39 Toplu yeri Yap Kooperatifi
Telefax +45 / 75 36 15 32 Phone +964 171 99033 Telefax +65 / 64 81 39 34 E Blok No. 4
Chilicote S.A. Telefax +964 171 93034 New Zealand TR-81720 Teperen-Tuzla/Istanbul
Avda. Julio A. Roca 546 KE-Burgmann A/S EagleBurgmann New Zealand Ltd. EBI Asia Pacific Pte. Ltd. Phone +90 / 216 / 5 93 02 93
C1067 ABN Buenos Aires, Seals Division Iran P.O. Box 34285, Birkenhead, 29 International Business Park, Telefax +90 / 216 / 5 93 02 98
Argentina Industrisvinget 1, Burgmann Pars 3 Parity Place, Glenfield, Auckland Acer Blg, Tower B, #03-03
Phone +54 / 11 / 43 43 84 69 DK-6600 Vejen Sealing Systems Co. Phone +64 / 9 / 4 43 57 72 609923 Singapore Turkmenistan
Telefax +54 / 11 / 43 31 42 78 Phone +45 / 75 36 49 88 No. 1, Kokab Alley, Telefax +64 / 9 / 4 41 27 66 Phone+65 / 65 65 66 23 Globe Interstar
Telefax +45 / 75 36 39 88 Pasdaran Ave. Telefax +65 / 65 65 96 63 Andaliba Street 82
Australia Teheran Nigeria 74011 Ashgabat
EagleBurgmann Australia Pty. Ltd. KE-Burgmann Bredan A/S Phone +98 / 21/ 2 86 28 19 Sealing Engineering Services Ltd. KE-Burgmann Singapore Pte. Ltd. Phone +993 / 12 / 47 73 24
16 Stennett Road, Odinsvej 1, Box 129 Telefax +98 / 21/ 2 85 44 81 82 St. Finbarr's College Road Expansion Joints Telefax +993 / 12 / 47 73 25
Ingleburn, NSW 2565 DK-6950 Ringkobing Akoka / Yaba, Lagos Blk 7 Pioneer Road North
Phone +61/ 2 / 96 05 64 44 Phone +45 / 96 74 28 00 Israel Phone +234 /1/ 82 59 09 No. 01-51, Singapore 628459 Ukraine
Telefax +61/ 2 / 98 29 69 58 Telefax +45 / 97 32 36 31 ETA Engineering Ltd. Telefax +234 /1/ 82 59 09 Phone +65 / 62 61 85 81 IRT-Technogerm
P.O. Box 890 Telefax +65 / 62 61 85 89 Ul. Komsomolskaja, 130
Austria Ecuador Ramat-Gan 52108 Norway 40009 Sumy
EagleBurgmann Austria GmbH Petroconsultant S.A. 18 Tushia St. EagleBurgmann Norway AS Slovenia (CRO, BIH, MAC, YU) Phone +380 542 610 324
Vogelweiderstrae 44 a Fco. de Goya 262 Phone +972 / 3 / 6 24 19 45 P.O. Box 143 Branch Office Slovenia Telefax +380 542 610 326
A-5020 Salzburg Urb. Los Cipresses II Telefax +972 / 3 / 5 62 84 75 Industriveien 25 D Malci Beliceve 37
Phone +43 / 662 / 82 57 01 El Condado N-2021 Skedsmokorset SLO-1000 Ljubljana United Arab Emirates
Telefax +43 / 662 / 82 57 03 P.O. Box 17-17-1254, Quito Italy Phone +47 / 64 / 83 75 50 Phone +386 / 1/ 4 23 15 57 EagleBurgmann Middle East FZE
Phone +593 / 2 / 49 17 52 EagleBurgmann Italia s.r.l. Telefax +47 / 64 / 83 75 75 Telefax +386 / 1 / 2 57 40 57 P.O. Box 61310
Belarus Telefax +593 / 2 / 49 35 09 Viale Martiri della Liberazione, 12 Mobile +386 / 41 / 66 13 15 Jebel Ali Free Zone
Filter CJSV I-23875 Osnago (LC) Oman Dubai
Logoisky tract and MCAD crossing Egypt Phone +39 / 039 / 95 22 501 Overseas Petroleum Slowakian Republic Phone +971/ 4 / 8 83 88 41
Administrative building Alimex Alexandria Telefax +39 / 039 / 928 94 83 Equipment Co. L.L.C. EagleBurgmann Czech s.r.o. Telefax +971/ 4 / 8 83 88 43
Expobel - Office 501 Import Export P.O. Box 261, Hamriya Na Drahach 1364
223053 Minsky district 258 Abdel Salam Aref Str. BT-Burgmann S.P.A. Postal Code 131, Sultanate CZ-15600 Praha 5 Zbraslav Uruguay
Phone +375 17 237 9365 Louran - El Saray Via Meucci, 58 of Oman Phone +420 / 2 / 57 92 05 05 Bilpa S.A.
Telefax +375 17 237 9363 Alexandria POB 313 I-36057 Arcugnano (Vi) Phone +968 / 60 21 82 Telefax +420 / 2 / 57 92 05 08 Casilla Correo 889
Phone +20 / 3 / 5 81 00 60 Phone +39 / 0444 / 28 89 77 Telefax +968 / 60 20 84 Cdigo Postal 11800
Belgium Telefax+20 / 3 / 5 81 00 65 Telefax +39 / 0444 / 28 86 93 Technosam s.r.o. Santa F, 1.131 - Montevido- UY
EagleBurgmann Belgium B.V.B.A. Pakistan Galvaniho 2/A Phone +598 / 2 / 29 33 43
Zagerijstraat 11 Estonia Japan Azif Asim Associates SK-82104 Bratislava Telefax +598 / 2 / 29 06 87
B-2960 Sint-Job-in't-Goor Filter AS Eagle Industry Co., Ltd. Suit #02, 1st Floor, Phone +421 / 2 / 43 41 35 85
Phone +32 / 3 / 6 33 99 44 Like tee 9, Peetri Kla, Rae vald, General Industry Overseas Sameer plaza Civic Center, 3-C1 Telefax +421 / 2 / 43 41 36 03 USA
Telefax +32 / 3 / 6 33 99 49 EE-75312 Harjumaa Sales Dept. Faisal Town EagleBurgmann Industries LP
Phone +00372 742 24 29 Marketing & Sales Division 54660 Lahore, Pakistan South Africa 10035 Brookriver Dr.
Brazil Telefax +00372 512 012 0 1-12-15, Shiba-Daimon, Minato-ku Phone +92 / 42 / 111 585 EagleBurgmann Seals Houston, Texas 77040
EagleBurgmann do Brasil Tokyo, 105-8587 Telefax +92 / 42 / 516 83 44 South Africa (PTY.) LTD. Phone +1/ 713 / 9 39 95 15
Vedaoes Industriais Ltda. Finland Phone +81/ 3 / 3432-4771 1 Brunton Circle Telefax +1/ 713 / 9 39 90 91
Av. Sta. Izabel, 1721 KE-Burgmann Finland Oy Telefax +81/ 3 / 3438-2370 Techno-Mech Pakistan Founders View South,
CEP - 13084-643 Barao Geraldo Expansion Joints 51-A/1, Rehmanpura, Modderfontein KE-Burgmann USA Inc.
Caixa Postal 65 60 P.O. Box 139, Ensimminen Savu Jordan Ferozpur Road Johannesburg 2065, Gauteng, 2100 Conner Road
Campinas - Sao Paulo SF-01510 Vantaa Eman Essa Trading Est. 54660 Lahore, Pakistan R.S.A. Hebron, Kentucky 41018
Phone +55 /19 / 37 49 97 40 Phone +358 / 9 / 82 55 01 P.O. Box 840067 Phone +92 / 42 / 757 5671 Phone +27 /11/ 4 57 90 00 Phone +1 / 859 / 746 0091
Telefax +55 /19 / 37 49 97 42 Telefax +358 / 9 / 82 55 02 00 Amman 11180 Telefax +92 / 42 / 759 7373 Telefax +27 /11/ 6 09 16 06 Telefax +1 / 859 / 746 0094
Phone +96 / 279 / 5 57 66 92 Postal adress: P.O. Box 1210,
Canada Tiivistetekniikka Oy Telefax +96 / 265 / 66 55 96 Peru Edenvale 1610, R.S.A. Uzbekistan
EagleBurgmann Canada Inc. Mkituvantie 5, Corporacin Gamma S.A.C. Also responsible for: Namibia, Globe Interstar
8699 Escarpment Way, SF-01510 Vantaa Kazachstan Av. La Marina 1321, San Miguel Botswana, Swaziland, Zambia, Nukus Str. 13 / 2
Units #9 & #10 Phone +358 / 207 65 171 Globe Interstar Lima - Peru Zimbabwe, Mozambique, 100015 Tashkent
Milton, Ontario / Canada L9T 0J5 Telefax +359 / 207 65 20 07 Furmanova Street 240, Office 18 Phone +51/12 / 63 76 70 Mauritius, Congo, Ethiopia, Phone +998 / 71 / 133 39 58
Phone +1/ 905 / 693 87 82 050059 Almaty Telefax +51/12 / 63 02 86 Uganda, Tanzania Telefax +998 / 71 / 133 49 74
Telefax +1/ 905 / 693 05 35 France Phone +7 / 327 / 264 34 86
EagleBurgmann France SAS Telefax +7 / 327 / 264 33 82 Philippines Spain Venezuela
Nova Magnetics-Burgmann Ltd. Zone dActivit les Perriers Burgmann (Philippines) Inc. EagleBurgmann Ibrica S.A. EagleBurgmann Venezuela, C.A.
One Research Drive 106/108 Route de Cormeilles Korea No. 9769 National Road, Maduya Avda. de Quitapesares, 40 Calle 6 con Calle 9,
Dartmouth, Nova Scotia BP 96, EagleBurgmann Korea Co. Ltd. Carmona, Cavite E-28670 Villaviciosa de Odn, Edif. Fant Piso 2
Canada B2Y 4M9 F-78505 Sartrouville 541, Suwolam-Ri, Seotan-Myon Phone +63 / 49 / 8 39 06 55 Madrid Zona Industrial La Urbina
Phone +1/ 902 / 465 66 25 Phone +33 / 1/ 30 86 50 20 Pyongtaek-Si, Kyongki-Do, Telefax +63 / 49 / 8 39 06 54 Phone +34-91-616 66 01 1070 Caracas
Telefax +1 / 902 / 465 66 29 Telefax +33 /1/ 39 15 16 07 -451-850-, Telefax +34-91-616 66 81 Phone +58 / 212 / 2 42 15 48
Pyongtaek Yosu Busan Daegu Poland Telefax +58 / 212 / 2 42 45 44
Chile Great Britain Phone +82 / 31/ 664-40 95 KE-Burgmann Polska Sweden
SelloTecno Ltda. EagleBurgmann Industries Telefax +82 / 31/ 664-40 94 Splka z.o.o. EagleBurgmann Sweden AB Vietnam
Luis Thayer Ojeda No. 0130 UK LP Branch Offices: Ulsan Al. Jerozolimskie 200 Svrmaregatan 3 Bavico Ltd.
OF 806 Providencia Santiago 12, Welton Road PL-02-486 Warszawa S-60361 Norrkping 97A Ly Tu Trong Street, District 1
Chile Wedgnock Industrial Estate Kuwait Phone +48 22 535 16 00 Phone +46 /11 /14 00 05 Ho Chi Minh City, Vietnam
Phone +56 / 2 / 333 33 03 GB-Warwick CV 34 5PZ Dan Trading & Contracting Telefax +48 22 535 16 48 Telefax +46 /11 /14 00 15 Phone +84 / 8 / 8 24 30 46
Telefax +56 / 2 / 333 25 19 Phone +44 /1926 / 41 76 00 Co. W.L.L. Telefax +84 / 8 / 8 22 35 82
Telefax +44 /1926 / 41 76 17 P.O. Box 5092 Portugal EagleBurgmann Sweden AB
China 13051 Safat, Kuwait EagleBurgmann Ibrica S.A. Gteborg Office
Burgmann Shanghai Ltd. KE-Burgmann U.K. Phone +965 / 2 43 25 53 Avda. de Quitapesares, 40 Askims Verkstadsvg 4
No. 127-8 Wenjing Road Eaton Bank, Congleton Telefax +965 / 2 43 78 33 E-28670 Villaviciosa de Odn, S-436 34 Askim, Gteborg
Minhang, Shanghai GB-Cheshire SW12 1NZ Madrid Phone +46 / 31 / 58 68 50
People's Republic of China Phone + 44 / 1260 / 29 12 89 Latvia Phone +34-91-616 66 01 Telefax +46 / 31 / 58 14 66
Phone +86 / 21/ 64 62 05 50 Telefax + 44 / 1260 / 29 13 03 Filter SIA Telefax +34-91-616 66 81 Postal adress:
Telefax +86 / 21/ 64 30 02 19 Aizkraukles 21 Box 9101, 40093 Gteborg
Greece 10069 Riga Qatar
Burgmann Dalian Ltd. A.G. Stambolidis & Co. Phone +00371 7801 921 Jaidah Motors and Trading Co. Switzerland
No. 86 Liaohe East Road, DD Port Mitrodorou 22 Telefax +00371 7550 224 P.O.Box 150 EagleBurgmann (Switzerland) AG
116620 Dalian GR-10441 Athen Doha / Qatar / Arabian Gulf Hofstrasse 21, CH-8181 Hri
People's Republic of China Phone +30 /21/ 05 15 06 65 Libya Phone +974 / 68 21 82 Phone +41 / 44 / 8 60 88 00
Phone +86 / 411 8758 1000 Telefax +30 /21/ 05 15 08 10 United Technical & Engineering Telefax +974 / 41 41 00 Telefax +41/ 44 / 8 61 01 35
Telefax +86 / 411 8758 1418 Miseran St.
Hungary P.O. Box 81276 Romania Taiwan
EBI (Shanghai) EagleBurgmann Hungaria Kft. Tripoli G.S.P.L.A.J. EagleBurgmann RO S.R.L. EagleBurgmann Taiwan Co. Ltd.
Investment Management Co. Ltd. Lejt utca 6 Phone +218 21 4442 641 Bdul. Iuliu Maniu, Nr. 7 1F No. 7, Lane 144 Chi Lin Rd.
Room 205 B Cimic Tower H-1124 Budapest Telefax +218 21 4776 152 Cladirea E, Parter, Hala 3, Sector Taipei
No. 1090 Century Ave. Pudong Phone +36 /1/ 3 19 81 31 RO-061072 Bucuresti Taiwan, R.O.C.
201120 Shanghai Telefax +36 /1/ 3 19 81 25 Lithuania Tel. +40 / 314 25 09 09 Phone +886 -2- 2581 0040
People's Republic of China Dmitri Melnikow Telefax +40 / 314 25 09 10 Telefax +886 -2- 2523 2793
Phone +86 21 58 36 15 99 India Balandziu 5 - 2
Telefax +86 21 58 35 48 38 Burgmann India PVT. LTD. LT-91188 Klaipeda Russia Thailand
A.K. Industrial Estate Phone / Fax +370 46 31 29 49 EagleBurgmann OOO EagleBurgmann (Thailand) Co. Ltd.
Colombia Madina Manzil Compound ul. Zheleznodorozhnaya, 1, str. 45 Banga Tower C, Floor 18th
58E / E5 / 3.000 / 08.08 / 9.2.1 EagleBurgmann Marketing Communications Germany
Mobile +370 69 82 14 27
William Tobon & Cia. S.V. Road, Goregaon (West) 606524 Zavolzhye 40/14 Moo 12 Banga-Trad Rd.
Cr. 7 - 64 - 50 - Ext. 301 Bombay 400 062 Malaysia Gorodetsky district, Km. 6.5 Bangkaew, Bangplee
Santaf de Bogota Phone +91/ 22 / 28 74 15 34 EagleBurgmann (Malaysia) Nizhny Novgorod region Samutprakarn 10540
Phone +57 / 1 / 211 76 75 Telefax +91/ 22 / 28 74 88 10 Sdn. Bhd. Phone +7 / 831/ 6 93 05 58 Phone +66 / 2 / 7 51 96 21
Telefax +57 / 1 / 211 76 75 No. 7, Lorong SS13, 6 B Telefax +7 / 831/ 6 93 05 59 Telefax +66 / 2 / 7 51 96 28
Eagle Seals & Systems India Ltd. Off Jalan SS13/6
Cyprus & Lebanon 212/2, Hadapsar Subang Jaya Industrial Estate Moscow Representation Trinidad
TRCI Ltd. Off. Soli Poonawalla Road 47500 Petaling Jaya Ul. Novotcheremuschkinskaja 61 Eswil Equipment & Supply
122, Limassol Ave. PO Box 24371 Pune 411 028 India Phone +60 / 3 / 56 34 86 24 RF-117418 Moskau (W.I.) Ltd
1703 Nicosia, Cyprus
Phone+357 22 42 79 80
Phone +91 / 20 / 2699 3900
Telefax +91 / 20 / 2699 3921
Telefax +60 / 3 / 56 34 97 42 Phone +7 / 095 / 7 97 20 14
Telefax +7 / 095 / 7 97 20 78
10 - 16 Lady Hailes Avenue
San Fernando, Trinidad, W. I.
Burgmann Industries
Telefax +357 22 42 30 21
GmbH & Co. KG
Mexico P.O. Box 3585, La Romaine
KE-Burgmann EagleBurgmann Mexico Saudi Arabia
Czech Republic Flexibles India Pvt. Ltd. Burgmann Trinidad, W. I.
S.A. de C.V. Phone +1/ 868 / 6 57 88 38
EagleBurgmann Czech s.r.o. Survey No. 1426 Saudi Arabia Limited
Na Drahach 1364 Nagappa Industrial Estate,194
Calzada de Guadalupe
Num. 350-6, Col. El Cerrito PO box No. 3422, Telefax +1/ 868 / 6 52 90 02 uere Sauerlacher Str. 610
CZ-15600 Praha 5 Zbraslav
Phone +420 / 2 / 57 92 05 05
G.N.T. Road, Puzhal
Chennai 600 066 , India
C.P. 54720, Cuautitln Izcalli, Dammam Port Road
Dammam, Saudi Arabia
Tunisia
Indus Serv S.A.R.L
D-82515 Wolfratshausen
Estado de Mxico, Mexico City
Telefax +420 / 2 / 57 92 05 08 Phone +91 / 44 / 6 59 06 32
Telefax +91 / 44 / 6 59 09 17
Phone +52 / 55 / 58 72 53 93 Phone +96 / 63 / 8 59 91 19
Telefax +96 / 63 / 8 59 92 29
69 Rue Houcine Bouzaiene Germany
KE-Burgmann Czech s.r.o.
V Lznich 395 Indonesia
Telefax +52 / 55 / 58 72 64 93
Gas Arabian Services Est
Apt. N4, 2 me Etage
1001 Tunis Phone +49(0)8171/23-0
CZ-254 01 Jilove u Prahy PT EagleBurgmann Indonesia
Morocco
Petro-Mat P.O.Box 3422 Phone +216 / 71/ 337 215
Telefax +216 / 71/ 337 214
Telefax +49(0)8171/23-1214
Phone +420 / 2 / 41 02 18 11 Jl. Jababeka Blok J6-E Dammam 31471, King Saud Street
Telefax +420 / 2 / 41 02 18 30 Kawasan Industri Cikarang
Angle Rue Michel de l'Hpital
et Rue Jules Cesar Kingdom of Saudi Arabia www.eagleburgmann.com
Bekasi 17550 - Jawa Barat Casablanca 05 Phone +96 / 63 / 8 35 15 00
Phone +62 / 21/ 8 93 53 13 Phone +212 / 240 / 87 99 Telefax +96 / 63 / 8 32 28 22 All technical specifications are based on extensive tests and our many years of
Telefax +62 / 21/ 8 93 53 15 Telefax +212 / 240 /19 39 experience. The diversity of possible applications means, however, that they can
serve only as guide values. We must be notified of the exact conditions of application
before we can provide any guarantee for a specific case. Subject to change.