Professional Documents
Culture Documents
Tutorial 5 PDF
Tutorial 5 PDF
has a fixed bottom and a few constraints at the top. The material is steel
Analysis Steps
1. In the model tree double click on the Parts node (or right click on parts and
select Create)
2. In the Create Part dialog box name the part and
a. Select 3D
b. Select Deformable
c. Select Solid
d. Set approximate size = 200
e. Click Continue
10. Expand the Assembly node in the model tree and then double click
onInstances
a. Select Dependent for the instance type
b. Click OK
11. Double click on the Steps node in the model tree
a. Name the step, set the procedure to Linear Pertubation, and select Frequency
b. Click Continue
c. Eigensolver: Lanczos. Number of eigenvalue requested: 30.
d. Click OK
12. Expand the Field Output Requests node in the model tree, and then double click