Professional Documents
Culture Documents
Atrk 021
Atrk 021
TYPE:
One/Two Circuit
FIRM NAME:
Trak Rail and
PROJECT:
Components
31/8 11/2
11/2 3 41/2 47/16
AKTEF AKTIL AKTSL AKTT
Live-End Joiner Straight Mini-Joiner Straight/L Joiner T Joiner
Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet
(Z, metallic silver) (Z, metallic silver) (Z, metallic silver) (Z, metallic silver)
Specify a live-end joiner for top feed Specify the straight mini-joiner to Specify the straight/L joiner to Specify the T joiner to mechanically and
electrical connections from a recessed mechanically and electrically couple any mechanically and electrically couple electrically couple any three trak lengths
outlet box. It can also be top fed directly two trak lengths in a straight line. Add any two trak lengths in a straight line in a T configuration.
with cable. .078 (2mm) for the straight mini-joiner or L 90 configuration. Supplied with
when calculating overall trak lengths. separate straight and L covers.
11/2
11/2
31/8 11/2
47/16 31/8 31/8 11/2
51/2 @ 90
AKTX AKTF AKTCF AKTCC
X Joiner Flex Joiner Conduit End Joiner Live-End Joiner w/Cord
Finish: black (BL) or white (WH) Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet Finish: black (BL) or white (WH)
Specify the X joiner to mechanically and (Z, metallic silver) (Z, metallic silver) Specify the live-end joiner when temporary
electrically couple any four trak lengths Specify the flex joiner to mechanically Specify the conduit end joiner when or portable trak hookup is required.
in an X configuration. and electrically couple any two trak utilizing conduit to provide the electrical Supplied with a 10 SPT-2 105 C 3/c
lengths to create angles from 0 to 90. connection. 16 AWG flexible cord with NEMA 5-15P
The flex joiner can be flexed in either grounding plug.
horizontal or vertical planes.
85/8 13/8
41/4
13/8
5
7
/8
21/4
5 41/4
AKTTBC AKTWC AKTPFCC AKTFF
T-bar Mounting Clips Wireway Cover Outlet Box Cover Plate Floating Feed
Finish: Chrome only Finish: White (WH) only Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet
Specify for installation for T-Bar ceilings. For enclosing wiring from stem to power (Z, metallic silver) (Z, metallic silver)
Four clips per package. Constructed of feed at stem power feed location. Specify the cover plate with any power For electrical connection anywhere
.5mm tempered and plated SK5 steel. joiner with a recessed junction box. along the length of the trak. Mounts over
a two-gang box and can be connected
to one or two circuits.
11/2 33/16
3
/4
7
/16 15
/16
45/8
5 11/2 45/8
AKTMP AKTPA AKTEC AKTPFC
Mono-Point Adaptor Pendant Adaptor End Cap Power Feed Cover
Finish: black (BL) or white (WH) Finish: black (BL) or white (WH) Finish: black (BL), white (WH) or Zet Finish: black (BL), white (WH) or Zet
For single fixture mounting without the For use of pendant or cord hung (Z, metallic silver) (Z, metallic silver)
use of trak rails. Mounts over a two- luminaires (by others). Maximum For single run installation of floating For T-Bar installations with any power
gang box. weight: 25 lbs. canopy joiner runs. Two per package. joiner.
41/2 3
/8
1
AKTW AKTCSK
Wand Component 1.15 Canopy Mount Stem Kit
Finish: black (BL), white (WH) or Zet AKTTSK
(Z, metallic silver) T-Bar Mount Stem Kit
Specify for pendant mount ArchiTrak Finish: black (BL), white (WH) or Zet
fixtures below trak rail. 4.46
(Z, metallic silver)
Lengths: AKTSPA 18 Specify for suspension applications of
Standard
See 12 = AKTW12 Sloped Ceiling Adapter Kit ArchiTrak rail system below finished
24 = AKTW24
Lengths Finish: black (BL), white (WH) or Zet ceiling. Two stems per kit.
36 = AKTW36 (Z, metallic silver) Length: 18 standard
48 = AKTW48 Use with AKTCSK(Sold Seperately) Contact factory for custom lengths.
Will susbend track from ceiling up to
13/8 45.