Professional Documents
Culture Documents
Piping Specification Checklist PDF
Piping Specification Checklist PDF
Not Not
No. Items to check OK
OK Required
1 Verify revision number, purpose of revisions, numbering, title.
2 Verify revision record sheet/ change summary sheet (If any)
3 Scope
4 Applicable Codes and Standards
5 Acronyms and Abbreviations
6 Reference Specifications
7 Material requirement / General Notes
8 What mill test cert. must be provided?
9 Carbon Equipvalent
10 NACE MR-01-75/ISO requirement
11 Stainless Steel requirement ?
12 Duplex Stainless Steel requirement ?
13 GRE Piping Requirement (If any)
14 The piping material line class designators which defines how the line class
or specification are structured
15 Branch Chart which will define what type of branch connection to use for
each header-branch size combination
16 Are there any note in the Branch chart
17 Process Flow Summary
18 Customer Specification
19 Specific material selection where appropriate
20 Design limitations for candidate materials
21 Corrosion and material selection evaluations
22 Line class Index which lists all the line classes currently being used on the
project along with a brief summary
23 Are there any remark in the line class index ?
24 Pipe Class Datasheet
24.1 Class
24.2 Design Code
24.3 Rating and Facing
24.4 Material
24.5 Corrosion Allowance
24.6 Service
24.7 Pressure/ Temperature limit
24.8 Do it conform to Pipe Class Index?
25 Pipe (Refer to Appendix 1: Material Selection Diagram)
25.1 Which standard?
25.2 Size range of Pipe
25.3 Schedule of each pipe size (Pipe wall thickness)
Has the wall thickness be calculated in accordance with the applicable
ASME B31 Code ?
25.4 Do the wall thickness conform to Wall thickness calculation report ?
25.5 Ends of pipe (PE BE) for each pipe size
25.6 Material specification for each pipe size
25.7 Welded pipe shall not be substituted for seamless pipe. Seamless pipe may
be substituted for welded pipe in all services, sizes and materials.
26 Socket Weld Fittings
(Cap/Coupling/Elbow/Tee/Sockolet/Nipolet/Nipple/Reducer/Swage)
26.1 Which standard?
26.2 Size range of socket weld fittings
26.3 Material specification for socketweld fittings
NGUYN ANH TNG- PIPING TEAM Page 2 of 6
PIPING CLASS SPECIFICATION CHECKLIST ENGINEERING DEPARTMENT
32.1 Do the material of Bolts & Nuts comply with the material of Flange ?
32.2 Do Bolts & Nuts comply with Specification for Protective coating ?
33 Valves
33.1 Valve Tag Description
33.2 Class Identifier
33.3 Valve Type
33.4 End Connection
33.5 Additional Valve Design Features
33.6 Size of valve
33.7 Do it conform to Manual Valve Specification ?
34 Notes
34.1 Are all the Notes clear and understandable?
APPENDIX 1
MATERIAL SELECTION DIAGRAM
APPENDIX 2
BASIC MATERIAL