Professional Documents
Culture Documents
4740 PDF
4740 PDF
1. The figure shows a 16T 20◦ straight bevel pinion driving a 32T gear, and the location of the bearing (10)
centerlines.
Now, showing the proper directions of (transmitted loads,
torques), draw separate free body diagrams of the both shafts a
and b (assuming given co-ordinate system).
(no need to calculate the magnitudes of bearing reactions).
a
z
3) 3
The cantilever bracket is bolted to a column with five 8 in-16 UNC SAE grade 4 bolts to support 2000 lbf force. (20)
The bracket is made from AISI 1020 hot-rolled steel.
Find out:
i) Minimum factor of safety by considering shearing of bolts only
ii) Bending normal stress in the bracket
b1 30 mm
b2 50 mm
h 5 mm
d 50 mm
c 150 mm
x 13.08 mm
ӯ 21.15 mm
i) Show the direction of Primary shear stresses only at these marked points correctly
5 6
3 2 1
ii) Show the direction of Secondary shear stresses at these points correctly
5 6
3 2 1
iii) Based on the resultant stresses, find out the critical point among those six points in the weld
5 6
3 2 1