Professional Documents
Culture Documents
M O D E L E T- 1 2 6
FEATURES
• Hall effect sensors and solid state MOSFET contactor drivers
minimize moving parts, thereby increasing reliability and
Mean Time Between Failure.
• Easy to install.
SPECIFICATIONS
• Operating voltage:
DESCRIPTION 13 – 58VDC
The Curtis throttle assembly provides an analog 0-5V output • Throttle output range:
proportional to throttle position for interfacing with motor speed 0 to 5 Volts
controllers.
• Maximum throttle output:
5.3 Volts
APPLICATION
• Minimum throttle output:
This electronic throttle is ideal for use in material handling, golf 0 Volts
cars, on-road and other electric vehicle applications which
• Maximum deadband at zero throttle:
require a 0-5V input for speed control.
10 degrees
• Forward/Reverse current:
1.5 amp max
www.curtisinstruments.com
M O D E L E T- 1 2 6
di m ensions mm
6.0 x 6.00
116°
M3 X12
22.0
øM5
22.0
24.0
69.0
I N STA L L AT I O N
ET-126 Throttle
1 Pot Lo
1 2 3 2
3
Battery + after KSI
Reverse
4 Forward
4 5 6 5
6
No connect
No connect
7 8 9 7
8
Battery –
0-5V output
9 No connect
ET-126 Throttle
AMP Mate-N-Lock Connector
Female p/n: AMP 350720-1
With pins: 350561-1
is a trademark of Curtis Instruments, Inc. Specifications subject to change without notice ©2008 Curtis Instruments, Inc. 50124 REV B 12/08