Professional Documents
Culture Documents
Version 1.0
QUESTION NO: 1
How many zone set(s) can be active at the same time?
A. 1
B. 3
C. 10
D. unlimited
Answer: A
QUESTION NO: 2
Which protocol is used to discover a CIMOM?
A. SLP
B. UDP
C. TPC
D. SNMP
Answer: A
QUESTION NO: 3
Which IBM Tivoli Storage Productivity Center server directories and subdirectories need
to be backed up on UNIX in case of a disaster?
A. /opt/IBM/TPC
B. /usr/IBM/Tivoli/tip and /usr/IBM/TPC
C. /opt/IBM/Tivoli/tip, /opt/IBM/replication, and /opt/IBM/TPC
D. /usr/IBM/Tivoli/tip, /usr/IBM/replication, and /opt/IBM/TPC
Answer: C
QUESTION NO: 4
What are the default server components that will get installed when a typical installation
with Servers is selected?
Answer: D
QUESTION NO: 5
Which two items must be configured in IBM Tivoli Storage Productivity Center (Tivoli
Storage Productivity Center) to send an alert to Tivoli Enterprise Center/OMNIbus?
(Choose two.)
Answer: B, E
QUESTION NO: 6
The customer is requesting performance monitoring of NetApp storage subsystems.
Which agent is required?
Answer: A
QUESTION NO: 7
What are the correct steps to create a zone set?
QUESTION NO: 8
After SMI-S agent of the fabric has completed its discovery, what is the next step before
creating zone or zone set?
A. Run Probe.
B. Run Discovery.
C. Do not do anything else.
D. Run Performance Monitor job.
Answer: A
QUESTION NO: 9
Where does a user go to run a CIMOM Discovery on the IBM Tivoli Storage
Productivity Center GUI?
A. Administrative Services->Discovery->CIMOM
B. Administrative Services->Discovery->CIM agent
C. IBM Tivoli Storage Productivity Center -> CIMOM Discovery
D. IBM Tivoli Storage Productivity Center -> Discovery -> CIMOM
Answer: A
QUESTION NO: 10
What are two methods to determine if a CIM agent contains the devices that it manages,
after it has been added successfully on IBM Tivoli Storage Productivity Center GUI?
(Choose two.)
Answer: C, E
QUESTION NO: 11
What is the minimum interval for data gathering by a switch performance monitor job?
A. 1 minute
B. 5 minutes
C. 10 minutes
D. 15 minutes
Answer: B
QUESTION NO: 12
Which device currently supports for Single Sign-on with IBM Tivoli Storage Productivity
Center V4.1?
A. SVC 4.3.1
B. DS8000 Release 4.2
C. DS5000 (Firmware 7.50.12.00)
D. Brocade switches managed by DCFM
Answer: B
QUESTION NO: 13
When submitting a storage optimization report job, will data be physically moved from
one storage pool to another?
Answer: B
QUESTION NO: 14
Given a successful installation of IBM Tivoli Storage Productivity Center, which
directory contains the current Device server logs?
A. <TPC_INST_DIR>\log
B. <TPC_INST_DIR>\data\log
C. <TPC_INST_DIR>\device\log
D. <TPC_INST_DIR>\data\server
Answer: C
QUESTION NO: 15
How can a user validate that the data agents are registered successfully on the IBM Tivoli
Storage Productivity Center GUI tree?
Answer: D
QUESTION NO: 16
In the IBM Tivoli Storage Productivity Center GUI, where can it be verified if a switch is
enabled for performance monitoring?
Answer: D
QUESTION NO: 17
Which information is collected from computers during the probe job?
Answer: A
QUESTION NO: 18
Which IBM Tivoli Storage Productivity Center V4.1 (Tivoli Storage Productivity Center)
license is required for using the storage performance optimizer?
A. Basic Editon
B. Standard Edition
C. Tivoli Storage Productivity Center for Disk
D. Tivoli Storage Productivity Center for Data
Answer: B
QUESTION NO: 19
Policies are enforced when defined conditions are detected by a monitoring job. What are
two requirements to be used in the Policy management function to manage and enforce
policies? (Choose two.)
A. quotas
B. constraints
C. Security levels
D. System enforcer
E. Data Management tool
Answer: A, B
QUESTION NO: 20
Which group does the installer's user ID have to belong to when installing DB2 on a
Windows platform?
A. TCPADMIN
B. DB2 Users Group
C. Administrator Group
D. Windows Systems Group
Answer: C
QUESTION NO: 21
For computer and file system groups in Data Manager, a Group By Cluster check box is
displayed. What happens if this option is selected?
A. The Available pane displays a cluster name next to any clustered computers and
cluster resource groups.
B. The Available pane automatically filters and hides any cluster aware computers from
being displayed in the list.
C. The Available pane provides an additional option of being able to filter and hide
cluster aware computers from being displayed in the list.
D. The Available pane displaying any computer or cluster resource group that belongs to
a PowerHA or MSCS Cluster is grouped under its cluster name.
Answer: D
QUESTION NO: 22
What are two prerequisites for IBM Tivoli Storage Productivity Center to launch external
tools? (Choose two.)
Answer: A, B
QUESTION NO: 23
What is the minimum number of servers required to install DB2, IBM Tivoli\ Agent
Manager and IBM Tivoli Storage Productivity Center for a small customer environment
consisting of a single DS8000 and 10 host machines?
A. 1
B. 2
C. 3
D. 4
Answer: A
QUESTION NO: 24
How many zone member(s) does a zone contain?
A. one
B. five
C. unlimited
D. Check with vendor documentation to see what is supported.
Answer: D
QUESTION NO: 25
Which IBM Tivoli Storage Productivity Center license is necessary for IBM Tivoli
Storage Productivity Center --> Analytics function usage?
Answer: D
QUESTION NO: 26
Which IBM Tivoli Storage Productivity Center V4.1 media disk image contains the
Storage Resource agent installation packages?
A. Disk 1
B. Disk 2
C. Disk 3
D. both Disk 1 and Disk 2
Answer: D
QUESTION NO: 27
Upon completion of the IBM Tivoli Storage Productivity Center (Tivoli Storage
Productivity Center) upgrade, the Tivoli Storage Productivity Center database must be
migrated by using the database migration tool. Which choice represents the database
migration tools that can be executed to perform the database migration?
A. db2update.bat or db2update.sh
B. migratetables.bat or migratetables.sh
C. partitiontables.bat or partitiontables.sh
D. migratepartitions.bat or migratepartitions.sh
Answer: C
QUESTION NO: 28
Which jobs need to run in order to populate the database with all available information
for a storage subsystem?
Answer: C
QUESTION NO: 29
Which is a valid triggering condition for the scan job alert?
A. Scan Failed
B. Scan Completed Successfully
C. Scan Completed with Warnings
D. Scan found more than 10,000 files
Answer: A
QUESTION NO: 30
Which task must be performed before gathering information about NetWare volumes?
Answer: D
QUESTION NO: 31
Data agents can be assigned to run scan and probe jobs. Which Data agents should be
assigned to perform scans?
Answer: B
QUESTION NO: 32
A customer has a server running SUN Solaris. The customer has the requirement to be
informed once a day by e-mail whenever large core files (more than 100 MB per file and
older than 30 days) have been generated, in order to charge the project owning the server
for the wasted space. Which three types of configurations are needed to implement the
requirements? (Choose three.)
A. Run a discovery.
B. Create/modify a quota.
C. Create/modify an alert.
D. Create/modify a profile.
E. Create/modify a scan job.
F. Create/modify a constraint.
Answer: D, E, F
QUESTION NO: 33
In order for single sign-on (SSO) to be working correctly, how must IBM Tivoli Storage
Productivity Center (Tivoli Storage Productivity Center) be started?
Answer: C
QUESTION NO: 34
Which port and password are required when adding subordinate IBM Tivoli Storage
Productivity Center (Tivoli Storage Productivity Center) servers (rollup clients) to the
master Tivoli Storage Productivity Center server?
Answer: D
QUESTION NO: 35
What is the purpose of using directory groups within scans?
Answer: D
QUESTION NO: 36
Which three options are identified during a Solution Assurance meeting for IBM Tivoli
Storage Productivity Center (Tivoli Storage Productivity Center)? (Choose three.)
Answer: A, B, C
QUESTION NO: 37
Which statement is true about PIN?
Answer: B
QUESTION NO: 38
How is a constraint created that defines the acceptable and unacceptable file types, file
sizes, and file owners for a computer or a set of computers in an environment?
A. Select policy constraint, choose which restrictions to set, choose which users on which
computers to forbid access to, set alert, and run scan.
B. Using Data Manager, select constraints, choose which file systems, groups or
computers against which to apply the constraint, apply the constraint, choose action in the
type field, and set alert.
C. Using Policy Manager, create constraint, select files, groups, systems, computers,
network and storage resources which you want to apply the constraint against, select the
file types to forbid, define alerts, and run scan job.
D. Using Data Manager, select Policy Management, create constraint, select file systems,
file system groups, computers, and computer groups against which to apply the
constraint, select the storage resources against which you want to apply the constraint,
select the file types that you want to allow or forbid, and define alerts.
Answer: D
QUESTION NO: 39
Which three items, other than the mail server name and the domain name, must be
configured for e-mail alerts for IBM Tivoli Storage Productivity Center? (Choose three.)
A. Mail Port
B. E-mail agent
C. Return to field.
D. Post Office Port
E. TPC server name
F. Data Administrator
Answer: A, C, F
QUESTION NO: 40
Which databases are supported when using the database monitoring function in IBM
Tivoli Storage Productivity Center V4.1?
Answer: C
QUESTION NO: 41
Which statement is correct when using the Configuration Analysis function?
A. The user can define their own configuration items for checking, and scheduling of the
checker is possible.
B. The user cannot define their own configuration items for checking, but scheduling of
the checker is possible.
C. The user can define their own configuration items for checking, but scheduling of the
checker is not possible.
D. The user cannot define their own configuration items for checking, and scheduling of
the checker is not possible.
Answer: B
QUESTION NO: 42
The customer is requesting performance monitoring of fiber channel switches. Which
minimum IBM Tivoli Storage Productivity Center V4.1 (Tivoli Storage Productivity
Center) license is required?
Answer: C
QUESTION NO: 43
When deploying Data or Fabric agents, which version of the IBM Tivoli Agent Manager
is required with IBM Tivoli Storage Productivity Center V4.1?
Answer: A
QUESTION NO: 44
Creation of a named group is performed to logically represent a set of resources. Which
type of resource can be assigned into a group?
A. NAS filers
B. SAN switches
C. database tables
D. tape library subsystems
Answer: C
QUESTION NO: 45
Which definition best describes a master IBM Tivoli Storage Productivity Center (Tivoli
Storage Productivity Center) server?
A. A server that manages the replication sessions between Tivoli Storage Productivity
Center servers ensures that these sessions are in sync, and provides a progress report.
B. A server not only monitors and reports on storage resources like a standard server, but
also communicates with other master servers to gather storage information collected by
these servers.
C. A server manages and monitors the status of all Storage Resource agents defined to
subordinate Tivoli Storage Productivity Center servers by running periodic Tivoli Storage
Productivity Center server probes.
D. A server not only performs normal monitoring and reporting of storage resources like
a standard server, but also gathers the storage information (by Tivoli Storage Productivity
Center server probes) that has been collected by subordinate servers.
Answer: D
QUESTION NO: 46
What is included in the Non-Disk Storage report in the Monitored Computer Storage
Space group of reports?
Answer: D
QUESTION NO: 47
What is the minimum license a customer must have to use new Storage Resource agents
of IBM Tivoli Storage Productivity Center V4.1 (Tivoli Storage Productivity Center)?
Answer: B
QUESTION NO: 48
Which password is used when configuring IBM Tivoli Storage Productivity Center for
rollup reporting?
A. superuser
B. host authentication password
C. common agent registration password
D. resource manager registration password
Answer: B
QUESTION NO: 49
How many different levels of authorization are available within IBM Tivoli Storage
Productivity Center?
A. Two: Administrator for Data, Disk, Fabric, and Tape, and Operator for Data, Disk,
Fabric, and Tape
B. Three: Superuser and Administrator for Data, Disk, Fabric, and Tape, and Operator for
Data, Disk, Fabric, and Tape
C. Four: Superuser and Administrator for Data, Disk, Fabric, and Tape, and Operator for
Data, Disk, Fabric, Tape, and Reporting User
D. Four: Superuser, Productivity Center Administrator, and Administrator for Data, Disk,
Fabric, and Tape, and Operator for Data, Disk, Fabric, and Tape
Answer: D
QUESTION NO: 50
IBM Tivoli Storage Productivity Center CAS Data agent has been successfully deployed,
but the agent will no longer start. Which command would be run to collect the TPC CAS
Data agent log files?
A. <TPC_INST_DIR>\ca\service.bat
B. <TPC_INST_DIR>\ca\collectLogs.bat
C. <TPC_INST_DIR>\ca\subagents\service.bat
D. <TPC_INST_DIR>\ca\subagents\TPC\service\service.bat
Answer: D
QUESTION NO: 51
Which field is required during creating the fabric zone set using the wizard?
Answer: A
QUESTION NO: 52
Which IBM Tivoli Storage Productivity Center GUI tree is the file system scan job
created from?
A. Disk Manager
B. Data Manager
C. Fabric Manager
D. Data Manager for Chargeback
Answer: B
QUESTION NO: 53
What is the best way to back up IBM Tivoli Storage Productivity Center (Tivoli Storage
Productivity Center) server database in case of a disaster, using offline backup?
Answer: D
QUESTION NO: 54
How is the IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center)
GUI started on a Windows 2003 server?
A. Start Menu->Programs->IBM->TPC
B. Start Menu->Programs->Tivoli->Productivity Center
C. Start Menu->Programs->IBM->Tivoli Productivity Center
D. Start Menu->Programs->Tivoli Storage Productivity Center->Productivity Center
Answer: D
QUESTION NO: 55
What are the default database names of Agent Manager and IBM Tivoli Storage
Productivity Center server?
Answer: D
QUESTION NO: 56
Where should the IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity
Center) servers be installed if a customer is running an environment with HP-UX 11.1i
and AIX 5.3 servers?
Answer: B
QUESTION NO: 57
When deploying a Data agent on a computer where a Storage Resource agent (SRA)
already exists, and both agents are required to point to the same Data server, which action
will take place?
A. The SRA is automatically uninstalled after the Data agent installation completes and
runs a successful probe job.
B. The Data agent will fail indicating that another agent already exists on the same
computer pointing to the same Data server.
C. The SRA is uninstalled and then reinstalled automatically after the Data agent
installation completes and runs a successful probe job.
D. The Data agent will be installed along side the SRA with no dependencies, which
allows the use of the SRA as well as the Data agent functionalities.
Answer: A
QUESTION NO: 58
Given that a non daemon Storage Resource agent (SRA) is installed, which service is
expected to be seen running?
A. SRA service
B. IBM Tivoli Common agent service
C. IBM WAS Tivoli Agent Manager service
D. The non daemon SRA does not require a service.
Answer: D
QUESTION NO: 59
Which three items must be taken into account when planning for IBM Tivoli Storage
Productivity Center V4.1 (Tivoli Storage Productivity Center)? (Choose three.)
Answer: A, C, E
QUESTION NO: 60
Which function within the topology viewer allows a customer to follow connectivity
from a host disk or computer to a storage subsystem, and vice versa providing an end-to-
end topology view?
A. SAN Planner
B. Volume Planner
C. Data Path Mapper
D. Data Path Explorer
Answer: D
QUESTION NO: 61
A customer has a server running SUN Solaris. The customer has the requirement to be
informed once a day by e-mail whenever large core files (more than 100 MB per file and
older than 30 days) have been generated, in order to charge the project owning the server
for the wasted space. Which kind of job will search for these files?
A. Scan
B. Probe
C. Discovery
D. Scheduled Scripts
Answer: A
QUESTION NO: 62
Should IBM Tivoli Storage Productivity Center V4.1 (Tivoli Storage Productivity Center)
be installed on a system with 2 GB of memory?
Answer: C
QUESTION NO: 63
For best results, what is the job sequence to check quotas for monitored databases?
Answer: A
QUESTION NO: 64
Which two output formats are available for batch report jobs? (Choose two.)
A. HTML File
B. XML Chart
C. PDF Chart
D. JPEG Image File
E. Raw Unformatted File
Answer: A, C
QUESTION NO: 65
A customer has started an ILM project and needs to identify file system data that can be
moved or archived from their tier 1 storage to less expensive media. Which agent is
required to be installed to meet this customer's requirement?
A. Data agents
B. Fabric agents
C. common agents
D. Storage Resource agents
Answer: A
QUESTION NO: 66
Which alerts can be defined for probe jobs?
A. Probe Failed
B. Connection Timed Out
C. Storage Subsystem Not Found
D. No Agent Found To Probe This Device
Answer: A
QUESTION NO: 67
Which IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center)
components can be installed using the silent installation method?
Answer: A
QUESTION NO: 68
What must be checked to see if Storage Resource agents (SRAs) are successfully
installed and operational?
Answer: D
QUESTION NO: 69
What is the minimum IBM Tivoli Storage Productivity Center V4.1 license required for
storage area network fabric management?
A. Basic Edition
B. Fabric Edition
C. Limited Edition
D. Standard Edition
Answer: A
QUESTION NO: 70
What is the correct service name of the TIP service on Windows?
Answer: A
QUESTION NO: 71
A customer's environment consists of many different hosts, subsystems, applications, and
services. The customer wants to use the topology viewer to view the health of a specific
service such as Service Access Point by grouping components together within the
environment form part of this service, displaying them as one entity within the topology
viewer. How can this be achieved?
Answer: B
QUESTION NO: 72
In the IBM Tivoli Storage Productivity Center GUI, where can it be verified if a storage
subsystem is enabled for performance monitoring?
Answer: D
QUESTION NO: 73
Given the customer requirement to report on database utilization, which installation best
meets that requirement?
A. Install the Storage Resource agents (SRAs) on all hosts where database reporting is
required.
B. Install the Agent Manager and the SRAs on all hosts where database reporting is
required and no other configuration is needed.
C. Install the Agent Manager and the Data agents on all hosts where database reporting is
required, and configure the connection parameters in the IBM Tivoli Storage Productivity
Center GUI for each database instance.
D. Install the Agent Manager and the SRAs on all hosts where database reporting is
required, and configure the connection parameters in the IBM Tivoli Storage Productivity
Center GUI for each database instance.
Answer: C
QUESTION NO: 74
What is one of the points that should be considered when installing the Agent Manager
1.3.2. on 64 Bit Linux and AIX platforms?
A. The Agent Manager does not support 64 Bit Linux and AIX platforms.
B. The DB2 Tools Catalog is required to be installed, before launching the Agent
Manager installation.
C. The registry database is required to be created manually, before launching the Agent
Manager installation.
D. The WebSphere Application Server is required to be installed manually, before
launching the Agent Manager installation.
Answer: C
QUESTION NO: 75
Which three tasks must be performed before gathering information about NetWare
volumes? (Choose three.)
Answer: B, E, F
QUESTION NO: 76
In the IBM Tivoli Storage Productivity Center GUI, where is it specified how often the
system captures snapshots of the configuration and when is it to delete them?
Answer: D
QUESTION NO: 77
Which statement on a storage subsystem performance report is incorrect?
Answer: D
QUESTION NO: 78
Which report is available in Disk Manager in IBM Tivoli Storage Productivity Center
V4.1?
Answer: C
QUESTION NO: 79
Which data collection job should be run for producing a storage subsystem performance
report?
A. subsystem scan
B. subsystem probe
C. subsystem discovery
D. subsystem performance monitor
Answer: D
QUESTION NO: 80
What should be used to collect detailed information about the configuration of a storage
subsystem?
A. a scan job
B. a probe job
C. a discovery job
D. a performance monitor job
Answer: B
QUESTION NO: 81
Which users and groups are required to operate DB2 UDB on UNIX or Linux?
A. the instance owner, the fenced user, and the DB2 administration server user
B. the instance owner, the fenced user, and the IBM Tivoli Storage Productivity Center
serve user
C. the Agent Manager owner, the IBM Tivoli Storage Productivity Center user, and the
DB2 administration server user
D. the instance owner, the IBM Tivoli Storage Productivity Center superuser, and the
IBM Tivoli Storage Productivity Center server user
Answer: A
QUESTION NO: 82
What is the purpose of creating a profile for use within a scan?
Answer: B
QUESTION NO: 83
Where is the default location of installation logs that can be checked after the server is
successfully installed on Windows?
A. C:\Program Files\IBM\TPC\log
B. C:\Program Files\IBM\TPC\data\log
C. C:\Program Files\IBM\TPC\device\log
D. C:\Program Files\IBM\TPC\tool\install\log
Answer: A
QUESTION NO: 84
Which three functions are listed under IBM Tivoli Storage Productivity Center ->
Analytics tree? (Choose three.)
A. Alerting
B. Topology
C. SAN Planner
D. Storage Optimizer
E. Storage Resource Group Management
F. Configuration Analysis/ Configuration History
Answer: C, D, F
QUESTION NO: 85
Which Triggering-Condition is valid when configuring Hypervisor Alerts?
A. Hypervisor Added
B. Hypervisor Removed
C. Virtual Machine Added
D. Virtual Machine Discovered
Answer: C
QUESTION NO: 86
Which entities are scanned by the default IBM Tivoli Storage Productivity Center (Tivoli
Storage Productivity Center) scan job?
Answer: B
QUESTION NO: 87
What is the minimum level of accessing the login ID that Data Manager uses to log in to
Microsoft SQL Server instances to run a probe?
A. root
B. permit
C. superuser
D. administrator
Answer: B
QUESTION NO: 88
Which task must be performed before gathering information about NetWare volumes?
Answer: D
QUESTION NO: 89
Can a computer be a member of multiple user-defined Computer Groups?
Answer: B
QUESTION NO: 90
What is the default location for the IBM Tivoli Storage Productivity Center installation
logs on a Windows 2003 server?
A. \opt\IBM\TPC\logs
B. C:\Program Files\TPC\log
C. C:\Program Files\TPC\install
D. C:\Program Files\IBM\TPC\log
Answer: D
QUESTION NO: 91
Which Agent Manager directory needs to be backed up on a UNIX machine in case of a
disaster?
A. /opt/IBM/AgentManager
B. /usr/IBM/AgentManager and IBMCDB database
C. /usr/IBM/Agentmanager and IBMCDB database
D. /opt/IBM/Agentmanager, /home/db2inst1/sqllib/, and IBMCDB database
Answer: A
QUESTION NO: 92
What is a valid Storage Resource agent installation option?
Answer: A
QUESTION NO: 93
What is the minimum level of DB2 supported by IBM Tivoli Storage Productivity Center
V4.1?
A. DB2 9.5
B. DB2 9.1 FP 2
C. DB2 8.2 FP 7a
D. DB2 8.1 FP 14
Answer: B
QUESTION NO: 94
What is the best solution to ensure correlation when using master and subordinate server
relationships to generate rollup reports?
A. If an agent machine is using storage from a subsystem, both the agent and subsystem
should be monitored by the same subordinate server.
B. If an agent machine is using storage from a subsystem, both the agent and subsystem
should be monitored by separate subordinate servers.
C. Each subordinate server should monitor no more than 120 unique data sources. This
number includes Data agents, Fabric agents (Inband and Out of Band), CIMOM agents,
and VM servers (VMWare).
D. The master server should monitor no more than 50 unique data sources. This number
includes subordinate servers, Data agents, Fabric agents (Inband and Out of Band),
CIMOM agents, and VM servers (VMWare).
Answer: A
QUESTION NO: 95
When creating a storage report for determining how much storage space is being used,
which job type should be performed under Data Manager -> Capacity -> Filesystem Used
Space?
A. pings
B. scans
C. probes
D. discovery
Answer: C
QUESTION NO: 96
A customer does not want to use IBM Tivoli Storage Productivity Center (Tivoli Storage
Productivity Center) for Replication. What is the recommended installation procedure in
this case?
A. Be sure to use the proper license that does not enable Tivoli Storage Productivity
Center for Replication.
B. Use the Custom Installation option and choose not to install Tivoli Storage
Productivity Center for Replication.
C. Complete the Tivoli Storage Productivity Center V4.1 installer, and when the Tivoli
Storage
Productivity Center for Replication installer is launched, cancel it.
D. Complete the Tivoli Storage Productivity Center V4.1 and Tivoli Storage Productivity
Center for Replication installers, and when both are finished, disable the Tivoli Storage
Productivity Center for Replication service.
Answer: D
QUESTION NO: 97
Which action cannot be triggered by a storage subsystem alert?
A. Run Script.
B. Login Notification
C. Windows Event Log
D. Run IBM Tivoli Storage Productivity Center job
Answer: D
QUESTION NO: 98
In the Resource History Retention panel, what happens if a check box is not selected?
Answer: A
QUESTION NO: 99
When creating a file constraint under Policy Management in Data Manager, which two
types of resources is a constraint applied against? (Choose two.)
A. directories
B. file systems
C. directory groups
D. computer groups
E. storage subsystems
Answer: B, D
Answer: B, E
A. no alerts stored
B. under Administrative Services --> Alerting
C. under Data Manager for Databases --> Alerting
D. under IBM Tivoli Storage Productivity Center --> Alerting
Answer: C
A. MSSQL
B. SYBASE
C. IBM DB2
D. Oracle DB
Answer: C
A. Disk Manager
B. Tape Manager
C. Data Manager
D. Element Manager
E. Replication Manager
F. Administrative Services
Answer: D, E, F
Answer: C
Answer: B
A. Nothing. By default, the database statistical data are retained indefinitely and will
always be available.
B. Nothing. By default, the database statistical data are retained for three months and this
setting cannot be changed.
C. Go to Administrative Services -> Configuration -> Configuration History Settings and
verify the values in the boxes.
D. Go to Administrative Services -> Configuration -> Resource History Retention for
Databases and verify the values in the boxes.
Answer: D
A. other
B. fabrics
C. switches
D. data path explorer
E. storage subsystems
F. storage resource groups
Answer: B, C, E
A. IBM 3494
B. IBM 3310
C. ADIC i500/i2000
D. IBM 3584 (TS3500)
E. all IBM Tape Libraries
F. all EMC SMI-S 1.3.0 Tape Libraries
Answer: B, C, D
A. fabric probe
B. daily performance data
C. storage resource group defined
D. Tivoli Storage Productivity Center for Data scan
Answer: B
Answer: D
Answer: C
A. Use the IBM Tivoli Storage Productivity Center User Interface to create SRA
deployments.
B. Use the command line interface on the IBM Tivoli Storage Productivity Center server
to deploy the agents remotely.
C. Use an FTP server to deploy the agents code to the required computer, and this will
automatically run the installation program once the code has been ftp'ed successfully.
D. Invoke the installation program found on the IBM Tivoli Storage Productivity Center
media directly from the IBM Tivoli Storage Productivity Center server, similar method
used when deploying Data agents.
Answer: A
A. users
B. databases
C. computers
D. NAS filers
E. switch groups
F. tape library subsystems
Answer: A, B, C
A. one
B. five
C. unlimited
D. Check with vendor documentation to see what is supported.
Answer: D
A. Run Script.
B. Run a new scan.
C. Run a new probe.
D. Pop-up Notification
Answer: A
Answer: A
QUESTION NO: 117
Which information is required to send IBM Tivoli Storage Productivity Center alerts as
SNMP traps?
Answer: B
A. CIM agent
B. Data agent
C. universal agent
D. Storage Resource agent
Answer: B
Answer: A
Answer: B
Answer: D
A. IBM SVC
B. IBM DS8000
C. IBM DS3000
D. IBM DS4000
E. all devices at SNIA.com
F. all IBM Storage Subsystems with FlashCopy function
Answer: A, B, D
A. DBA
B. public
C. private
D. any read only account defined in Oracle
Answer: A
Answer: A
Answer: D
Answer: D