Professional Documents
Culture Documents
British Stardard Technical Specification PDF
British Stardard Technical Specification PDF
BS 4660
Note:
1) BS 4660 applies to drain pipes to be laid under gardens, fields, driveways,
yards and roads other than main roads. Maximum wheel load not to exceed
7000 kgs. Cover depths not to to be less than 1.2m (4 ft.)
3) All commonly used dimensions normally ex-stock delivery for other sizes
on request.
Manufactured to : BS 6099
Standard length : 2.9 meters
Colour : Black or White
Socket type : Solvent weld
Note:
1) Non-standard lengths and colours can be manufactured to meet
customer's exact requirements.
Size Class 'B' Class 'C' Class 'D' Class 'E' Class 'O' Class '6' Class '7'
(mm)
inch
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
1-/14 42.1 42.4 2.2 2.7 2.7 3.2 3.6 4.2 4.8 5.5
1-1/2 48.1 48.4 2.5 3.0 3.1 3.7 1.8 2.2 3.7 4.3 5.1 5.9
2 60.2 60.5 2.5 3.0 3.1 3.7 3.9 4.5 1.8 2.2 5.5 6.3
2-1/2 75.0 75.3 3.0 3.5 3.9 4.5 4.8 5.5 1.8 2.2
3 88.7 89.1 2.9 3.4 3.5 4.1 4.6 5.3 5.7 6.6 1.8 2.2
4 114.1 114.5 3.4 4.0 4.5 5.2 6.0 6.9 7.3 8.4 2.3 2.8
6 168.0 168.5 4.5 5.2 6.6 7.6 8.8 10.2 10.8 12.5 3.1 3.7
8 218.8 219.4 5.3 6.1 7.8 9.0 10.3 11.9 12.6 14.5 3.1 3.7
Note: 2% of rated pressure should be reduced for each 1°C rise above 20°C
Pressure Ratin Bar
1/2 28 40
3/4 22 32
1 24 32
1-1/4 20 28
1-1/2 18 25
2 - 22
Note:
1) Dimensions of Class 6 & 7 pipes are same as ASTM D1785, SCH-40 AND
SCH-80 respectively.
2) A wide range of compatible fittings manufactured to BS 4346 part 1 by
Durapipe (U.K.), are available .
3) Class B & C pipes are generally socketed. Class E pipes can be socketed
on request.
4) Class D pipes are non-stock items, can be produced on request.
uPVC Electrical & Telephone Duct
BTC/1006/DUCT - 1994
Inside
Diameter
Outside Inside Effective
Wall of Socket
Sl. Duct Diameter Diameter of Duct
Thickness Socket Length
No. No. of Duct Socket at Length
(mm) at (mm)
(mm) Shoulder (mm) Meters
Entry
(mm)
1. 54D 96.5±0.2 3.25±0.2 97.0±0.1 96.0±0.1 100 6
2. D56 53.9±0.1 2.0±0.1 54.1±0.1 53.7±0.1 70 3
3. 38mm 38.0±0.1 2.0±0.1 38.2±0.1 37.8±0.1 40 3
ETISALAT
Inside
Diameter
Outside Inside Effective
Wall of Socket
Sl. Duct Diameter Diameter of Duct
Thickness Socket Length
No. No. of Duct Socket at Length
(mm) at (mm)
(mm) Shoulder (mm) Meters
Entry
(mm)
1. 54D 96.5±0.2 3.25±0.4 97.0±0.1 96.0±0.1 100 6
2. 56 53.9±0.1 1.55±0.15 54.1±0.1 53.9±0.1 70 3
Inside
Diameter
Outside Inside Effective
Wall of Socket
Sl. Duct Diameter Diameter of Duct
Thickness Socket Length
No. No. of Duct Socket at Length
(mm) at (mm)
(mm) Shoulder (mm) Meters
Entry
(mm)
1. 54D 96.5±0.2 3.25±0.2 97.0±0.1 96.0±0.1 100 5.8
2. 56A 56.5±0.2 3.25±0.2 57.0±0.1 56.0±0.1 70 3
Polyethylene Pipe (for cold water supply & irrigation)
Wall Thickness
Nominal Outside Diameter Standard
(mm) Class 'C' (86.7
Size Class 'B' (86.7 PSI) Coil
PSI)
inch. Length
Minimum Maximum Minimum Maximum Minimum Maximum
1/2 21.2 21.5 2.7 3.0 90
3/4 26.6 26.9 3.4 3.7 90
1 33.4 33.7 3.0 3.3 4.2 4.6 90
1-1/4 42.1 42.5 3.7 4.1 5.3 5.8 50/100
1-1/2 48.1 48.5 4.3 4.7 6.1 6.7 50/150
2 60.1 60.3 7.6 8.4 50/150
Colour : Black
Note:
1) British Standard 1972 : 1967 applies to black polyethylene pipe ( Type 32)
for use in cold water services and irrigation system.