You are on page 1of 11

SSD FW Upgrade

DOS version

Nov,2015
Tool:
USB drive: Capacity>512MB*1pc

FW:
3109_AP023PC0_DOS FW Upgrade(ReInitial).zip

Note:
1.Upgrade for AS220/AS510S/AST680/AS2280 - 32G/64G/128GB SSD only.

2.To set SATA mode as AHCI

3.Plz back up data first, the upgrade process will erase all the data.
1. Prepare firmware upgrade USB drive
1. Connect the USB to PC, confirm
detection Pass.

2. Run ”ISPInst.exe” after extract the file.

3.Choose the USB device

4.Click “Start”
1-1. Process
Confirmation message It shows “Done” means successful.
2. Set SATA mode as AHCI mode
3. Boot up from USB drive
4. Start Upgrade device
5.Input 0 or 1 from red square

Present firmware
New firmware
6.Please re-plug or power off SSD

Note: You could check the firmware version redo from step4.

You might also like