Professional Documents
Culture Documents
5Mn)
Chemical Composition
Composition limits. 55.0 to 60.0 Cu, 0.4 to 2.0 Fe, 0.5 to 1.5 Al, 1.5 Mn max, 0.4 Pb max,
1.0 Sn max, 1.0 Ni max, bal Zn
Mechanical Properties
1) Tensile properties. Typical. Tensile strength, 490 MPa (71 ksi); yield strength, 195
MPa (28 ksi); elongation, 30% in 50 mm (2 in.).
2) Compressive properties. Compressive strength: 165 MPa (24 ksi) at permanent set
of 0.1%; 240 MPa (35 ksi) at permanent set of 1%; 545 MPa (79 ksi) at permanent
set of 10%.
3) Hardness. 130 HB
4) Elastic modulus. Tension, 105 GPa (15 × 106 psi).
5) Fatigue strength. Reverse bending, 145 MPa (21 ksi) at 108 cycles
6) Impact strength. Charpy, 42 J (31 ft · lbf).
7) Creep-rupture characteristics. Stress for 0.1% creep in 10,000 h: 190 MPa (28 ksi) at
120 °C (250 °F); 43 MPa (6.2 ksi) at 175 °C (350 °F); 12 MPa (1.7 ksi) at 230 °C (450
°F)
Mass Characteristics
1) Density. 8.3 g/cm3 (0.299 lb/in.3) at 20 °C (68 °F)
2) Patternmaker's shrinkage. 1.65 to 2.15% for pouring temperature of 905 °C (1665
°F)
Thermal Properties
1) Liquidus temperature. 880 °C (1616 °F)
2) Solidus temperature. 862 °C (1583 °F)
3) Coefficient of linear thermal expansion. 20.3 μm/m · K (11.3 μin./in. · °F) at 21 to 93
°C (70 to 200 °F).
Magnetic Properties
1) Magnetic permeability. 1.09 at field strength of 16 kA/m
2) Fabrication Characteristics
3) Machinability. 26% of C36000 (free-cutting brass)
4) Annealing temperature. 260 °C
B. Hasil Analisis material Manganese Aluminium Bronze
a) Kondisi 50% beban (RPM 200 ; Thrust 219900 N, Torque 49203.82 Nm)